How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE

Size: px

Start display at page:

Download "How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE"

Charla Scott
6 years ago
Views:

1 ca_1-102:layout 1 2/10/11 11:51 M Page 1

MM-P connectors are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (S) or at 90 right angle (R, R) board thickness.

2 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use the standard MM metal shell and provide high density and high reliability in board-to-board, board-to-cable and cable-to-cable applications. MM-P connectors are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (S) or at 90 right angle (R, R) board thickness. Jackpost mounting for use with locking hardware is also available. ow to Order - MM-P Series RoS OMPLIN SRIS INSULTOR MTRIL ONTT RRNMNT ONTT TYP TRMINTION TYP MOUNTIN RWR (Shell lange) MOUNTIN RWR OR P R MM * - 25 P S P - T L TRMINTION TIL LNT MOIITION O SLL INIS MOIITION OS SRIS MM - Micro "" Metal Shell INSULTOR MTRIL Liquid rystal Polymer (LP) ONTT RRNMNT 9, 15, 21, 25, 31, 37, 51, and 100 ONTT TYP P - Pin (Plug) S - Socket (Receptacle) NOT: ack molding material poxy ysol #M40S TRMINTION TYP S - Straight P Termination R - Right ngle P Termination R - Right ngle Narrow Profile P Terminations MOUNTIN RWR (Shell lange) P - Jackposts M7 - Jackposts M83513/5-07 (Sizes 9-51) M17 - Jackposts M83513/5-17 (Size 100) No letter - none MOUNTIN RWR OR P T - Threaded Insert #2-56 Thd for Shell Sizes 9 thru 51 #4-40 Thd for Shell Size 100 No letter - none TRMINTION TIL LNT MOIITION O None (2.77) ±.015 (0.38) Standard L (3.18) L56 - L (4.83) L39 - L (9.52) SLL INIS MOIITION OS None - Yellow hromate/admium over Nickel lectroless Nickel old over Nickel Irridite/lodine 30 - lack nodize (or special modification codes, consult customer service.) imensions shown in inches (mm) -18

3 Micro- P - " ontact Spacing MM-P S (oard Straight) Series.186 (4.72) MX. PLU.198 (5.03) MX. RPTL.096 ±.005 (2.44 ± 0.13) I. Size 9-51).120 ±.005 (3.05 ± 0.13) Size 100 V. #1 LST V. JKPOST (9-51) #2-56 UN-2 JKPOST (100) #4-40 UN ± 0.15 (2.77 ± 0.38) LST V. J K * V. #1.100 (2.54) R. P Termination rrangements* (Viewed from P solder side) Identification number shown for plug connector, use reverse order for socket connector. NOT: imensions shown are for reference only-consult factory for final design dimensions (9.53) 9 ontacts (5.72) 15 ontacts (5.72) ontacts 25 ontacts (2.54) ontacts ontacts ontacts ontacts NOT: Standard lead termination is #24 W, solid copper, solder or tin dipped ll Termination onfigurations.100 (2.54) x.100 (2.54) rid Pattern, Offset. ±.007 (.18) ±.005 (.13) (35.31) 1 (29.21).785 (19.94).334 (8.48).165 (4.19).355 (9.02).555 (14.10) (35.31) 1 (29.21).785 (19.94).402 (10.21).165 (4.19).355 (9.02).555 (14.10) (35.31) 1 (29.21).935 (23.75).484 (12.29).165 (4.19).355 (9.02).555 (14.10) (35.31) 1 (29.21).935 (23.75).552 (13.97).165 (4.19).355 (9.02).555 (14.10) (43.93) (36.83) (27.56).634 (16.10).165 (4.19).355 (9.02).555 (14.10) (43.93) (36.83) (27.56).702 (17.83).165 (4.19).355 (9.02).555 (14.10) (44.20) (38.10) (30.10).734 (18.64).165 (4.19).355 (9.02).555 (14.10) (44.20) (38.10) (30.10).802 (20.37).165 (4.19).355 (9.02).555 (14.10) (51.82) (33.91).884 (22.45).165 (4.19).355 (9.02).555 (14.10) (51.82) (33.91).952 (24.18).165 (4.19).355 (9.02).555 (14.10) (59.44) (53.34) (37.72) (26.26).165 (4.19).355 (9.02).555 (14.10) (59.44) (53.34) (37.72) (27.99).165 (4.19).355 (9.02).555 (14.10) (51.66) (50.80) (36.45).984 (24.99).228 (5.79).165 (4.19).355 (9.02).555 (14.10) (51.66) (50.80) (36.45) (26.72).296 (7.52).165 (4.19).355 (9.02).555 (14.10) (77.98) (71.12) (55.24) (35.15).271 (6.88).460 (11.68).303 (7.70).550 (12.70).686 (17.42) (77.98) (71.12) (55.24) (38.30).460 (11.68).303 (7.70).550 (12.70).686 (17.75) *or jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. imensions shown in inches (mm) -19

4 Micro- P - " ontact Spacing MM-P R (oard Right ngle) Series.109 ±.015 (2.77 ± 0.38).186 (4.72) MX. PLU.198 (5.05) MX..100 (2.54) JKPOST #2-56 UN ±.015 (3.18 ± 0.38) V. #1 LST V..096 ±.005 (2.44 ± 0.31) ±.010 (3.8 ± 0.25).100 P Termination rrangements (Viewed from bottom of connector, P solder side.) Identification number shown for plug connector, use reverse order for socket connector (9.53) 9 ontacts ontacts.300 (7.62) (5.72) 21 ontacts 25 ontacts.175 (4.45) ontacts ontacts 51 ontacts ontacts NOT: Standard lead termination is #24 W, gold plated, solid copper, solder or tin dripped. Part Number y Shell Size MM-9PR* MM-9SR* MM-15PR* MM-15SR* MM-21PR* MM-21SR* MM-25PR* MM-25SR* MM-31PR* MM-31SR* MM-37PR* MM-37SR* MM-51PR* MM-51SR* MM-100PR* MM-100SR* (35.31) (35.31) (39.12) (39.12) (42.93) (42.93) (45.47) (45.47) (51.82) (51.52) (59.44) (59.44) (47.63) (47.63) 2.74 (69.72) 2.74 (69.72) ±.007 (.18) 1 (29.21) 1 (29.21) (33.02) (33.02) (36.83) (36.83) (39.37) (39.37) (53.34) (53.34) (40.64) (40.64) (63.50) (63.50) *or jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. ±.005 (.13) ll Termination onfigurations.100 (2.54) x.100 (2.54) rid Pattern, Offset..334 (8.48).402 (10.21).484 (12.29).552 (13.97).634 (16.10).702 (17.83).734 (18.64).802 (20.37).884 (22.45).952 (24.18) (26.26) (27.99).984 (24.99) (26.72) (35.15) (38.10).228 (5.79).296 (7.52).271 (6.88).755 (19.18).755 (19.18) -20 imensions shown in inches (mm)

5 Micro- P - " ontact Spacing MM-P R (ondensed oard Right ngle) Series LST V..109 ±.015 (2.77 ± 0.38) + + V. #1 JKPOST 2-56 UN-2 (Size 9-51).186 (4.72) MX.PLU.198 (5.03) MX. RPT..185 (4.70)MX. JKPOST #4-40 UN 2 S VIW X.096 ±.005 (2.44 ± 0.31) I. (Size 9-51) S VIW Y * * * * OR 31: 1.085(27.56) MX. OR 37: 1.185(30.10) MX. OR 51: 1.225(31.12) MX..125 ±.005 (3.18 ± 0.31) I (46.10) MX. 100 VIW S VIW W P Termination rrangements (Viewed from bottom of connector, P solder side.) Identification number shown for plug connector, use reverse order for socket connector..083 (2.11) ontacts.108 (2.73) (2.54) ontacts.083 (2.11) ontacts ontacts.083 (2.11).325 (8.26).275 (6.98) (4.00) (4.65) ± (2.54 ± 0.13) (2.73) ontacts View Y 37 ontacts View Y 51 ontacts View Y 100 ontacts View W ll Termination onfigurations.100 (2.54) x.100 (2.54) rid Pattern, Offset. Part Number y Shell Size MM-9PR* MM-9SR* MM-15PR* MM-15SR* MM-21PR* MM-21SR* MM-25PR* MM-25SR* MM-31PR* MM-31SR* MM-37PR* MM-37SR* MM-51PR* MM-51SR* MM-100PR* MM-100SR*.785 (19.94).785 (19.94).935 (23.75).935 (23.75) (27.56) (27.56) (30.10) (30.10) (33.91) (33.91) (37.72) (37.72) (36.45) (36.45) (55.12) (55.12) ±.005 (.13).334 (8.48).402 (10.21).484 (12.29).552 (13.97).634 (16.10).702 (17.83).734 (18.64).802 (20.37).884 (22.45).952 (24.18) (26.26) (27.99).984 (24.99) (26.72) (35.15) (38.10) *or jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. NOT: Standard lead termination is #24 W, solid copper, solder or tin dripped..184 (4.70).228 (5.79).296 (7.52).271 (6.88).650 (16.15).650 (16.15) (25.40) (25.40) ±.010 (.25).300 (7.62).300 (7.62).400 (10.16).400 (10.16) ±.010 (.25).230 (5.81).230 (5.81).200 (5.08).200 (5.08) imensions shown in inches (mm) -21

6 Shielded MM P onnector amily The new shielded MM P-R board mount connector is an extension of ITT- IS standard MM series thru hole P connectors. This new MI shielded version includes a built in shielding can for effective shielding performance. This new design allows for terminations right to a P or to a flex circuit. The connector utilizes the standard MM shell and is available in condensed board right angle configurations. The pin layouts are from 9-51 positions. Jackpost mounting for use with locking hardware is also available. urrent Rating ielectric Withstanding Voltage Insulation Resistance ontact Resistance Operating Temperature Shock, Vibration 3 MP 600 V sea Level 5000 megaohms maximum 8 milliohms maximum -55 to g., 20 g Performance The table below summarizes the results of key tests performed in accordance with MIL-ST-1344, where applicable. ata is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. The table below summarizes the results of key tests performed in accordance with MIL-ST-1344, where applicable. ata is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test ielectric Withstanding Method 3001: Voltage 600 V at sea level 150 V at 70,00' altitude Insulation Resistance Method 3003 Thermal Shock Method ondition : - 55 to +125 Physical Shock Method 2004, ondition : 50 's, 3 axes, 6 millisecond duration sawtooth pulse Vibration Method 2005, ondition IV: 20 's, 10-2,000 z. 12 hrs urability 500 cycles of mating and unmating, 500 P max. Moisture Resistance Method 1002, Type II, omit steps 7a & 7b Salt Spray Method 1001, ondition : 48 hours ontact Resistance Method 1001, ondition : (MIL-ST-202) t 3 amps t 1 milliamp ontact Retention Per MIL-TL Method riteria of cceptance No breakdown No breakdown 5,000 megohms minimum No physical damage No physical damage No loss of continuity > 1 µsec No physical damage No loss of continuity > 1 µsec No mechanical or electrical defects Insulation resistance > 100 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 10 milliohms maximum 5 lb. minimum axial load -22 imensions shown in inches (mm)

7 Shielded MM P onnector amily Talking og xample = R MM * 37 P * R P T L RoS ompliance No Letter RoS not required R RoS omliant ssembly Series MM Micro - Metal Series Insulator Material No Letter Liquid rystalline polymer (LP) ontact rrangement 9, 15, 21, 31, 37, and 51 ontact Style P Pin (Plug) S Socket (Receptacle) Shielding Option M rounding Metal ackshell (onsult factory for availability) Termination Type R oard Mount, ondensed Right ngle.100 X. 100 Thru-ole Staggered rid Mounting ardware ode (Shell lange) No Letter ardware omitted P Standard Jackpost M7 Mil-Spec Jackpost Mounting ardware ode (or P) No Letter Standard Mounting oles.092 dia. mounting holes for sizes 9-51 T Threaded Insert #2-56 thread for shell sizes 9 thru 51 P Tail Length Modification ode No Letter Standard.109 ±.015 long #24W solder coated pigtail Modify length with L code as required. Refer to separate L code options, i.e. L39 =.250 ±.015 # - actory assigned for variation to standard configuration Shell inish and Mechanical Modification odes None Yellow hromate / admium over Nickel (101) 174 lectroless Nickel 172 old over Nickel Note: onsult factory for version with jack screws without mounting holes for use with flex circuit applications. onsult factory for tooled versions. imensions shown in inches (mm) -23

Microminiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.

Microminiature. Micro Edgeboard -.050 Contact Spacing MEB. Specifications. How to Order. ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne