FAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
|
|
|
- Amos Lindsey
- 6 years ago
- Views:
Transcription
1 mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into its locking position after the FF has been inserted into the connector, the FF leads are securely locked in place. SMT configuration Due to its small pitch and its ability to be surface mounted, this connector meets today s demand for high-density packaging. Top entry and side entry versions are available. Top entry is available with either an in-line or a staggered solder tail footprint whilst the side entry version is available with FF contact points on either the upper or lower sides. The FZ series Zero Insertion Force (ZIF) connector has been developed as an SMT version of the existing FMZ connector. Embossed taping for automatic mounting This connector is supplied in embossed tape packaging, for mounting by automatic placement machines. 1 Specifications urrent rating:,, D Voltage rating: 50V, D Temperature range: -25 to +85 (including temperature rise in applying electrical current) ontact resistance: Initial value/20m Ω max. fter environmental testing/40m Ω max. Insulation resistance: 500M Ω min. Withstanding voltage: 500V /minute pplicable FF: onductor pitch/mm onductor width/0.7mm Mating part thickness/0±0.05mm <Note>FF to be actually used should be checked for applicability. * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and onnectors" at the end of this catalog. * ontact JST for details. Standards 0Recognized E ertified LR20812
2 FZ ONNETOR onnector <Staggered, > With solder tab 0.5 Without solder tab 2.6 2
3 FZ ONNETOR Model No. ircuits In-line Staggered Reverse type Large slider type With solder tab Without solder tab T09FZ-SMT-TF T20FZ-SMT-TF 22 T22FZ-SMT-TF T22FZ-SMT-F-TF T22FZ-SMT-NF-TF T24FZ-SMT-TF 26 T26FZ-SM-1-T T26FZ-SM-T T26FZ-RSM-1-TF T26FZ-RSM-TF T26FZ-SMT-TF T26FZ-SMT-F-TF T26FZ-SMT-NF-TF In-line Reverse type S08FZ-SM-T S08FZ-RSM-T S09FZ-SM-T S11FZ-SM-T S11FZ-RSM-T S16FZ-SM-T S16FZ-RSM-T S20FZ-SM-T S20FZ-RSM-T S22FZ-RSM-T S25FZ-SM-T S26FZ-SM-T S26FZ-RSM-T Dimensions (mm) Q'ty / reel Top entry type Side entry type 2,000 2,000 2,000 1,000 2,000 Material and Finish RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed tape. ontact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Receptacle housing: P 6T, UL94V-0, ivory (natural) Slider housing: PPS, UL94V-0, brown (natural) Solder tab: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) 3
4 FZ ONNETOR Lead section dimensions of FF x(n+1)±0.07 ±0.15 x(n-1)±0.07 ±0.15 ± ±0.1 0±0.05 Reinforcing layer ±0.05 ±0.03 ±0.05 ±0.03 ± ±0.1 ±0.03 ±0.05 ± ±0.1 ±0.05 ±0.05 ±0.05 5± ± ± ±0.1 ± ± min. 7.5min. Note: N --- Number of circuits P board layout (viewed from component side) <Staggered, > With solder tab Without solder tab 5± Note: 1. Tolerances are non-cumulative: ±0.03mm for all centers. 2. The dimensions above should serve as a guideline. ontact JST for details. 4
5 FZ ONNETOR P board layout (viewed from component side) <> ±0.05 <Reverse type> ± ssembly layout ontact point ontact point FF FF <Staggered, > ontact point ontact point 4.45 FF FF 1.5± ± ± ±0.1 5± ±0.1 5± ±0.1 Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. The dimensions above should serve as a guideline. ontact JST for details. 0.7 Reverse type FF ontact point 5
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
PH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
EH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
RWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
EH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
DSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
DSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
JFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Wire-to-wire connectors (For Interface) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. pplicable contact and tooling
JFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Disconnectable rimp style (Wire-to-wire connectors) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. 2, 3 or s for
0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
Specifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
VL CONNECTOR. 1 Certified LR R Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 6.
Crimp.mm (.") pitch Disconnectable Crimp style Wire-to-wire connectors Features Housing lances for contact retention Since the contact retention lances are part of the housing rather than protruding from
UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Adam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
Dynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
PRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
Connector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
0.5mm and 1mm Pitch Connectors For FPC/FFC
rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is
0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Single 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
0.5 mm Pitch FPC / FFC Connectors
0.5 mm Pitch FP / FF onnectors FF9 Series OUTLINE The FF9 series is a slider lock connector of the contact pitch 0.5mm. It suits FP/FF of 0.3mm thickness. APPLIATIONS Mobile Phones, Notebook omputers,
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
0.175 mm pitch ultra-low profile
0.175 mm pitch ultra-low profile FP LIF back-lock onnector Upper ontact Type FF27 OUTLINE The FF27 series ultra-low profile FP LIF connector has a market leading height of only 0.66mm with a depth of just
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
Wire to Board Connectors - SMT Type CONNECTOR - Side Entry Part No.: MS242610R~MS242614R Suitable Contact: 2426PS PS-2RF:C 2426PS-2RF:E Suitable
Pitch Wire to Board Connectors - SMT Type C/DC 100V 2 Insulation Resistance: 1000M min. CONNECTOR - Top Entry Part No.: MS24262~MS242616 RF: Suitable Contact: 2426PS-2 2426PS-2RF:C 2426PS-2RF:E Note: Letters
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
APPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
Gecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
HCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
Customer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
COMPACT FLAT SIZE FOR AUTOMOTIVE
PACT FLAT SIZE FOR AUTOMOTIVE RELAYS RoHS compliant FEATURES Compact flat type Flat size enables it to be built-in switch units. PC board terminal type: 9.5 mm.374 inch Surface-mount terminal
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
SOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
Automotive Surface Mount Fuses
Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, 2.0 250VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
Card Edge Connectors Catalog Issued 7-03
Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-
KSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Current Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
4.3mm P.C.B TAB TERMINAL. Wire Range AWG mm P.C.B TAB TERMINAL. Pitch:4.8. Pitch: P.C.B TAB TERMINAL. Pitch:4.5. Pitch:4.
PCB CONNCTOR 4.3mm P.C.B TAB TRMINA A B ST 740284-1 ST 740284-2 GP 880236-1 GP 880236-2 ire Range Tab Material Dimension(mm) Thick. Finish Type Q'ty AG mm 2 Thick. Bag 0.5 9.7 5.2 4.0 A 10,000 /Tin 2.5
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down
E-Mark s business philosophy centers upon providing. each of its customers with maximum value. operates out of its facility in Shelton, Connecticut.
Company Profile E-Mark s business philosophy centers upon providing each of its customers with maximum value. This includes product quality appropriate for the application, accurate delivery & competitive
PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated