Catalog C-001 Rev. G
|
|
- Delphia King
- 6 years ago
- Views:
Transcription
1 atalog -001 Rev. G
2 Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector products to the electronics industry. Patent holder for many unique connector features and manufacturing techniques. Vertically integrated manufacturing raw materials to fi nished connectors. Technology Expertise with solid machined contacts provides a variety of high reliability connectors including high current density power connectors. Quality ssurance lab is capable of testing to IE, EI, UL, UL, military and customer-specifi ed requirements. In-house design and development of connectors based on market need or individual customer requirements. Internal manufacturing capabilities include automatic precision contact machining, injection molding, stamping, plating operations and connector assembly. Manufacturing locations in southwest Missouri, U.S.. (headquarters); Puerto Rico, France, hina, Singapore, and India. Total square footage: 407,441. Support Provides omplete apability Mission Statement To utilize product lexibility and application assistance to present quality interconnect solutions which represent value to customers worldwide. Quality Systems: Select locations qualifi ed to ISO 9001, ISO 14001, S9100, MIL-ST-790 and customer dock to stock programs. pplicable products qualifi ed to MIL-TL-24308, SE S39029, S 85039, MIL-TL-28748, Space 32, GSF S-311-P-4 and GSF S-311-P-10. ompliance to a variety of international and customer specifi c environmental requirements. Large in-house inventory of fi nished connectors. ustomer specifi c stocking programs. Factory direct technical sales support in major cities worldwide. One-on-one customer support from worldwide factory locations. World class web site. Value-added solutions and willingness to develop custom products with reasonable price and delivery. Regional Headquarters Spring ield, MO uch, France Singapore Products described within this catalog may be protected by one or more of the following US patents: #4,900,261 #5,255,580 #5,329,697 #6,260,268 #6,835,079 #7,115,002 Patented in anada, 1992 Other Patents Pending POSITRONI IS N ITR REGISTERE OMPNY Industries FEERL SUPPLY OE (age ode) FOR MNUFTURERS is Unless otherwise specified, dimensional tolerances are: 1) ±0.001 inches [0.03 mm] for male contact mating diameters. 2) ±0.003 inches [0.08 mm] for contact termination diameters. 3) inches [0.13 mm] for all other diameters. 4) ±0.015 inches [0.38 mm] for all other dimensions. Information in this catalog is proprietary to and its subsidiaries. believes the data contained herein to be reliable. Since the technical information is given free of charge, the user employs such information at his own discretion and risk. Industries assumes no responsibility for results obtained or damages incurred from use of such information in whole or in part. The following trademarks are registered to Industries, Inc. in the United States and many other countries: Industries, Inc.,, onnector Excellence, P+ logo, Posiand, PosiShop, Global onnector Solutions, Global onnector Solutions. The color blue as it appears on various connectors is a trademark of Industries, Inc., Registered in U.S. Patent and Trademark Offi ce.
3 ONNETOR ESRIPTIONS MELO- and EURO- ONNETORS M series and E series, professional level, fixed contacts. Solder cup, wrap post, and printed board contact terminations for inch and metric printed board hole patterns. Six connector variants, 9 through 50 contacts. Female open entry contacts. onnectors conform to IE , Performance Level Two. MX SERIES ONNETORS MX series, industrial level, fixed contacts. Solder cup, straight and right angle (90 ) printed board mount contact terminations. Five connector variants, 9 through 50 contacts. Posiand closed entry female contacts. onnectors conform to IE , Performance Level One. SOLI- ONNETORS S series, professional level, removable contacts. Solder cup, crimp and straight printed board mount contact terminations. Five connector variants, 9 through 50 contacts. Posiand closed entry female contacts. onnectors conform to IE 807-3, Performance Level Two. OR SERIES ONNETORS OR series, professional and industrial levels, removable contacts. rimp contact terminations. Thermocouple contact options available. Six connector variants, 9 through 50 contacts. IE , Performance Level One or Two. HRMO- ONNETORS H series, MIL-TL level, fixed contact. Solder cup, wrap post and straight and right angle (90 ) printed board contact terminations. Thermocouple contact options available. Five connector variants, 9 through 50 contacts. RHPSO- ONNETORS R series, MIL-TL / SE S39029 levels, removable contacts. rimp contact terminations. Thermocouple contact options available. Six connector variants, 9 through 50 contacts. O SERIES ONNETORS O series, professional and industrial levels, removable contacts. Solder cup, crimp and straight and right angle (90 ) printed board contact terminations. Thermocouple contact options available. Six connector variants, 15 through 104 contacts. ENSI- ONNETORS series, MIL-TL / SE S39029 levels, removable contacts. Solder cup, crimp and straight and right angle (90 ) printed board contact terminations. Thermocouple contact options available. Six connector variants, 15 through 104 contacts. STNR ENSITY OMPLINT PRESS-FIT ONNETORS P series, professional, industrial and military levels, machined contact, compliant termination. Five connector variants, 9 through 50 contacts. IE , Performance Levels One or Two. Military contact plating optional. HIGH ENSITY OMPLINT PRESS-FIT ONNETORS P series, professional, industrial and military levels, machined contact, compliant termination. Five connector variants, 15 through 104 contacts. Military contact plating optional. i
4 GENERL INFORMTION M SERIES MX SERIES E SERIES S SERIES TLE OF ONTENTS G E N E R L I N F O R M T I O N What Makes s New Posiand ontact Interface a Significant Improvement?... 1 The Posiand contact system has many advantages over the legacy split tine design Exploded Views of Typical Mated -subminiature onnector ssemblies... 3 onnector omponent escription and Terminology M s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly... 6 Solder up Termination - ode 2; Straight Printed oard Mount Termination - ode 3, 32 and 33; Ferrite Inductor ar For EMI/RFI Noise Suppression - ode F and Q; and Wrap Post Termination - ode Right ngle (90 ) Printed oard Mount Termination - ode 5 and ode Right ngle (90 ) Printed oard Mount Termination - ode 4; and Right ngle (90 ) and Straight Printed oard ontact Hole Pattern... 9 Ordering Information M X s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Solder up Termination - ode 2; Straight Printed oard Mount Termination - ode 3, 32 and 33; and Right ngle (90 ) Printed oard Mount Termination - ode Right ngle (90 ) Printed oard Mount Termination - ode 5; and Right ngle (90 ) and Straight Printed oard ontact Hole Pattern Ordering Information E s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Solder up Termination - ode 2; Straight Printed oard Mount Termination - ode 36; and Right ngle (90 ) Printed oard Mount Termination - ode 42 and Right ngle (90 ) Printed oard Mount Termination - ode 44; and Right ngle (90 ) and Straight Printed oard ontact Hole Pattern Ordering Information S s e r i e s -Sub onnector escriptions... i Wire Harness onnectors... v Other -subminiature Products Technical haracteristics ontact Variants and Standard Shell ssembly Removable rimp ontacts - ode 1 and 12; and Removable rimp ontacts - 18 WG Straight Printed oard Mount Termination Straight Printed oard ontact Hole Pattern Ordering Information ii continued on next page....
5 -Sub TLE OF ONTENTS H s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Solder up Termination - ode 2; Straight Printed oard Mount Termination - ode 3, 32, 33 and 36; and Wrap Post Termination - ode Right ngle (90 ) Printed oard Mount Termination - ode 5 and ode Right ngle (90 ) and Straight Printed oard ontact Hole Pattern Ordering Information R s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Removable rimp ontacts - ode 1 and Removable rimp ontacts - 18 WG; and Removable Thermocouple rimp ontacts Ordering Information H SERIES R SERIES O R s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Removable rimp ontacts - ode Removable rimp ontacts - 18 WG; and Removable Thermocouple rimp ontacts Ordering Information O s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Removable rimp ontacts - ode Removable rimp ontacts - 20 WG; and Removable Thermocouple rimp ontacts Removable Solder up ontacts - ode Fixed Solder up Termination - ode 21; and Straight Printed oard Mount Termination - ode 3 and Right ngle (90 ) Printed oard Mount Termination - ode 5 and ode Right ngle (90 ) Printed oard Mount Termination - ontact Variant ode 5 and ode Right ngle (90 ) and Straight Printed oard ontact Hole Pattern Ordering Information OR SERIES O SERIES s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Removable rimp ontacts - ode Removable rimp ontacts - 20 WG; and Removable Thermocouple rimp ontacts Removable Solder up ontacts - ode 2; and Straight Printed oard Mount ontacts - ode 3, 32 and Right ngle (90 ) Printed oard Mount Termination - ode 4; and ontact Variant ode Right ngle (90 ) and Straight Printed oard ontact Hole Pattern Ordering Information SERIES continued on next page.... iii
6 P SERIES P SERIES ONNETOR SVERS PPLITION TOOLS QPL LISTING -Sub TLE OF ONTENTS P s e r i e s P s e r i e s Technical haracteristics ontact Variants and Standard Shell ssembly Right ngle (90 ) ompliant Press-Fit Termination - ode 62; and Straight ompliant Press-Fit Termination - ode Right ngle (90 ) and Straight ompliant Press-Fit Printed oard ontact Hole Pattern Ordering Information onnector Savers/ Gender hangers and H Series Technical haracteristics and H Series ontact Variants and Standard Shell ssembly imensions Jackscrew Systems and H Ordering Information Series Technical haracteristics Series ontact Variants and Standard Shell ssembly imensions Ordering Information application tools Introduction Reels for utomatic Pneumatic rimp Tools ontact pplication Tools ross Reference List ompliant Press-fit onnectors Installation Tools Suggested Printed Hole Sizes for ompliant Press-Fit Termination Q P L L i s t I n g Technical haracteristics ontact Variants and Standard Shell ssembly Right ngle (90 ) ompliant Press-Fit Termination - ode 62; and Straight ompliant Press-Fit Termination - ode Right ngle (90 ) and Straight ompliant Press-Fit Printed oard ontact Hole Pattern Ordering Information offers a wide variety of QPL connector products Visit our website for the latest catalog updates and supplements at iv
7 Wire harness ONNETORS SVE TIME N MONEY! Let support you by cablizing your S / R / OR / O / connector selection. able ssembly esign Support We work closely with customers to: 1. esign assemblies in accordance with customer specifications. 2. Prepare wire harness connector configuration and performance specifications. 3. esign each system in accordance with applicable customer, domestic, and international standards. Technical Sales Support 4. efine and conduct performance and verification testing. Engineering Support Puerto Rico able ssembly FOR MORE ETILS ONTT TEHNIL SLES OR VISIT OUR WE SITE T: /cable-assemblies Quality ssurance v
8 GENERL INFORMTION What Makes s New Posiand ontact Interface a Significant Improvement? NEW! High reliability connectors utilize female closed entry contacts that provide an unbroken ring of solid material at the face of the contact. The closed entry feature is crucial in preventing damage to female contacts used in harsh environments, repeated mating cycles, blind mate applications and applications requiring highest reliability. Split tine contact design GENERL INFORMTION Figure 1 Sleeve -Sub The most common closed entry design utilized by connector manufacturers is a split tine and sleeve concept. See figure 1. With this design, both the mechanical forces and Sleeve placed on contact Front view Figure 2 electrical interface are provided only at the tip of the female contact. True closed entry contact design Posiand s new Posiand technology takes a unique approach Posiand placed on contact to closed entry female contacts. Posiand contacts utilize a two-piece contact design. See figure 2. Each piece serves a separate function, providing a more mechanically robust contact and more consistent electrical performance. Front view The main body of the Posiand contact provides a true closed entry opening to enhance robustness. The Posiand spring clip provides normal force on the male contact. onsistent electrical performance is supported through a larger area of contact interface between the male and female contact along the entire floor of the contact body. Posiand contacts are QPL listed under SE S39029 and qualified under GSF S-311-P4 to the higher 40 gram contact separation test requirement. continued on next page... 1
9 -Sub continued from previous page... The Posiand contact system has many advantages over the legacy split tine design GENERL INFORMTION Posiand is more robust than the split tine contact, which can be pried open in harsh environments, resulting in reduced normal force and degradation of electrical performance. Posiand has greater surface area at the male and female contact interface, resulting in more consistent electrical performance. Posiand has lower average insertion forces, resulting in greater ease in mating, especially in larger high density connectors. The average lower insertion force is accomplished while meeting or exceeding performance requirements. The Posiand s contact body does not require annealing of the crimp barrels, as does the split tine design. This eliminates concern of unintentionally heat-treating the mating end of the contact, which can cause electrical failure. Posiand is qualified under SE S39029 specification. Posiand is also qualified under GSF S-311-P4/08 Rev and GSF S-311-P4/10 Rev to the higher 40 gram contact separation test requirement. Posiand is protected by US Patent 7,115,002. For more details about the advantages of the Posiand system, please view the detailed white paper at or visit our web site at GENERL INFORMTION RTE URRENT (MPERES) RTE URRENT (MPERES) Size 22 Posiand ontacts Initial ontact Resistance: ohms, maximum. urve developed using High ensity -subminiature connectors loaded with size 22 crimp contacts terminated to size 22 WG wire TEMPERTURE RISE (º) TEMPERTURE RISE (º) TEMPERTURE RISE URVES Test conducted in accordance with UL1977. Size 20 Posiand ontacts ONTTS LOE IN POSITIONS 1-6 ONTTS LOE IN POSITIONS 1-2 ONTTS LOE IN POSITIONS 1-26 ONTTS LOE IN POSITIONS 1-62 ONTTS LOE IN POSITIONS Initial ontact Resistance: RTE URRENT (MPERES) RTE URRENT (MPERES) TEMPERTURE RISE (º) TEMPERTURE RISE (º) ohms, maximum. urve developed using Standard ensity -subminiature connectors loaded with size 20 crimp contacts terminated to size 20 WG wire ONTTS LOE IN POSITIONS 1-6 ONTTS LOE IN POSITIONS ONTTS 12 LOE IN POSITIONS ONTTS LOE IN POSITIONS 1-25 ONTTS LOE IN POSITIONS
10 GENERL INFORMTION GENERL INFORMTION EXPLOE VIEWS OF TYPIL MTE -subminiature ONNETOR SSEMLIES -Sub M000E6X 1 62F0S50T6X R25M10LVL0 H25F5R7NV M24308/25-6 M24308/4-3F M24308/ M24308/23-39F M0000X F3S
11 -Sub GENERL INFORMTION EXPLOE VIEWS OF TYPIL MTE -subminiature ONNETOR SSEMLIES GENERL INFORMTION 3 S9M00Z0Z M9F5R80TX ONNETOR OMPONENT ESRIPTION N TERMINOLOGY - Male and female signal contacts, size 22. Terminations may be crimp, solder cup and printed board mount. - Male and female signal contacts, size 20. Terminations may be crimp, solder cup, wrap post, compliant press-fit and printed board mount. - Unloaded connector insulators, male and female. Insulator retention system retains all contact termination types. Insulator may be used as a free or fixed connector. - Loaded connector insulators, male and female. Insulators may be preloaded per customer requirements with contacts having terminations of right angle (90 ) or straight solder printed board mount, wrap post, solder cup and press-fit. Insulator contact positions may be selectively loaded with contacts. onnectors are normally fixed panel or printed board connectors. - Fixed female jackscrews are the stationary threaded members of the non-polarized jackscrew system. - Fixed male and female jackscrews are the stationary threaded members of the polarized jackscrew system. - Rotating male jackscrews and screwlocks are the rotating threaded members of the non-polarized jackscrew system. - Rotating male and female jackscrews are the rotating threaded members of the polarized jackscrew system. - Vibration locking system consists of lock tabs on fixed connector and slide lock lever on free cable connector. - lind mating connector system with pilot probes on free connector and receptacle guides on panel mounted fixed connector. - able adapters [Hoods] are used on the free cable connector to provide cable support and contact protection. - Knobs of the polarized rotating jackscrew system are affixed to the rotating jackscrew by a set screw. 4
12 PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub M SERIES Size 20 ontacts, Fixed IE Publication Performance Level Two UL Recognized File #E49351 Telecommunication UL File #E S Recognized File #LR54219 Melo- series connectors are professional quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IE , Performance Level Two. Melo- series connectors utilize precision machined contacts which are fixed within the connector body. The female contact is an open entry design contact, precision machined of high tensile phosphor bronze. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Each Melo- connector variant is available with contact terminations for solder cup, wrap post, and straight and right angle (90 ) printed board mount terminations featuring a choice of three printed board footprints. Melo- series connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE and MIL-TL wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. MTERILS N FINISHES: Insulator: ontacts: ontact Plating: Shells: Mounting Spacers and rackets: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Nylon resin, UL 94V-0, black color. Precision machined copper alloy. Professional performance Gold flash over nickel plate. Other finishes available upon request. Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other mat rials and finishes available upon request. Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated; polyester. Phosphor bronze or beryllium copper with tin plate. rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Slide lock and lock tabs, steel with nickel plate. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: MELO- SERIES TEHNIL HRTERISTIS Fixed ontacts: Size 20 contact, male inch [1.02mm] mating diameter. Female contact - rugged open entry design. ontact Retention In Insulator: 6 lbs. [27N] Resistance To Solder 500 F [260 ] for 10 seconds duration per Iron Heat: IE ontact Terminations: Solder cup contacts inch [1.06mm] minimum hole diameter for 20 WG [0.5mm 2 ] wire maximum. Straight Printed oard Mount inch [0.71mm] termination diameter. Right ngle (90 ) Printed oard Mount inch [0.71mm] termination diameter for all printed board footprints. Wrap Post inch [0.64mm] square. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To ngle rackets: Jackscrews and riveted fasteners with a inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Printed oard: Rapid installation push-on fasteners and threaded posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating: Initial ontact Resistance: Insulation Resistance: Proof Voltage: learance and reepage istance [minimum]: Working Voltage: 7.5 amperes nominal ohms maximum. 5 G ohms V r.m.s inch [1.0mm]. 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: amp Heat, Steady State: -55 to days. 5 M series connectors can be supplied with interfacial seals and sealed between shell and insulator. This provides an additional degree of moisture resistance. See ccessories catalog for details.
13 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE M 9 M 15 M M K ±0.010 [1.27±0.25] M 29 M 37 M 50 STNR SHELL SSEMLY G 10 M SERIES E 1 H 0.036±0.008 [0.91±0.20] [5.59] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.05±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] 9 M 9 F 15 M 15 F 25 M 25 F 29 M 29 F 37 M 37 F 50 M 50 F [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [44.96] [44.96] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [31.78] [54.84] [52.43] [16.92] [25.25] [38.96] [32.36] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [38.96] [38.96] [63.50] [63.50] [61.11] [61.11] [10.95] [10.74] [11.43] [11.20] [15.37] [15.37] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [33.58] [33.58] [57.71] [57.71] [55.32] [55.32] [13.69] [13.69] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [6.02] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] 6
14 PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub Fixed female jackscrews SOLER UP TERMINTION OE 2 20 WG max. 2 [0.5 mm ] Fixed female jackscrew Fixed male jackscrew M SERIES [3.43] [8.94] Typical Part Number: M15M200T2Z OE NUMER L For solder cup contacts, specify code 2 in step 4 of ordering information. Swaged spacer with push-on fastener phosphor bronze Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: M15M200T6Z STRIGHT PRINTE OR MOUNT TERMINTION Ø [3.81] [0.71] OE 3, 32 N 33 Fixed female jackscrews [9.53] [0.71] [5.71] [12.70] [0.71] For straight printed board mount contacts, specify code number in step 4 of ordering information [0.25] NOMINL L Ø Typical Part Number: M25F3S60T0 FERRITE INUTOR R FOR EMI/RFI NOISE SUPPRESSION FILTERING HRTERISTIS OE F N Q Swaged spacer with push-on fastener phosphor bronze [0.25] Nominal STRIGHT PRINTE OR MOUNT ONNETOR Fixed female jackscrews TTENUTION [d] IMPENE TTENUTION* IMPENE [OHMS] SERIES M, MX, H OE NO. L [9.53] [6.10] O [9.53] [4.19] [13.08] [4.19] E, H [9.53] [2.57] M, MX O L Ferrite Inductor ar right angle (90 ) PRINTE OR MOUNT ONNETOR Ferrite inductor bar [3.43±0.13] M FREQUENY * NO-LO ONITION Material: Nickel zinc ceramic Fixed female jackscrews Specify code F or Q in step 6 of ordering information. F for ferrite inductor and Q for ferrite inductor with push-on fastener [0.64] Sq. M, H [9.53] [9.14] WRP POST TERMINTION OE [12.57] For wrap post contacts, specify code 6 in step 4 of ordering information [18.29] Typical Part Number: M15F600T20 M25M6S50T0
15 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE right angle (90 ) PRINTE OR MOUNT TERMINTION OE 5, [7.19] ONTT EXTENSION M**5**** [7.19] ONTT EXTENSION PRT NUMER * 1 M9*5**** [30.58] [24.99] [8.61] [7.19] Fixed female jackscrews ±0.008 [0.20] * 1 M15*5**** M25*5**** M29*5**** M37*5**** [38.91] [52.63] [44.55] [69.09] [33.32] [47.04] [38.96] [63.50] [8.61] [8.61] [10.03] [8.61] [7.19] [7.19] [7.19] [7.19] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. M SERIES M50*5**** [66.70] [61.11] [10.03] [7.19] [2.84] Specify code 5 in step 4 of ordering information [2.84] Numbering shown is rear view of male and face view of female [2.84] [4.06] Nominal Typical Part Number: M25M5R4NT2X Push-on fastener beryllium copper Ø0.028 [0.71] Typical Part Number: M50M5R4NT2X [3.18] X [5.92] Oval hole right angle (90 ) PRINTE OR MOUNT TERMINTION OE 59, [13.84] ONTT EXTENSION M**59**** [13.84] ONTT EXTENSION Fixed female jackscrews Specify code 59 in step 4 of ±0.008 [0.20] ordering information [2.84] E * 1 PRT NUMER * 1 M9*59**** M15*59**** M25*59**** M29*59**** M37*59**** M50*59**** Numbering shown is rear view of male and face view of female [30.58] [38.91] [52.63] [44.55] [69.09] [66.70] [24.99] [33.32] [47.04] [38.96] [63.50] [61.11] [6.99] [6.99] [6.99] [6.99] [6.99] [6.99] [13.84] [13.84] [13.84] [13.84] [13.84] [13.84] E [15.27] [15.27] [15.27] [16.69] [15.27] [16.69] [3.18] Nominal NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Typical Part Number: M29M590T2X [2.84] [2.84] Typical Part Number: M25M590T2X Ø0.028 [0.71] 8
16 PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub right angle (90 ) PRINTE OR MOUNT TERMINTION Ø0.125 [3.18] OE 4, [11.43] ONTT EXTENSION M**4**** [11.43] ONTT EXTENSION PRT NUMER * 1 M SERIES Fixed female jackscrews ±0.008 [0.20] * 1 M9*4**** M15*4**** M25*4**** M29*4**** M37*4**** [30.58] [38.91] [52.63] [44.55] [69.09] [24.99] [33.32] [47.04] [38.96] [63.50] [12.85] [12.85] [12.85] [14.27] [12.85] [11.43] [11.43] [11.43] [11.43] [11.43] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 4 in step 4 of ordering information [2.84] M50*4**** [66.70] Numbering shown is rear view of male and face view of female [61.11] [14.27] [11.43] [2.84] [2.84] [4.06] Nominal Typical Part Number: M25M40T20 Ø0.028 [0.71] Typical Part Number: M50M40T20 right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrow [12.50] Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] [1.37] [2.84] [4.11] [2.74] [2.84] [8.23] [1.40] [15.19] M9 M15 M [2.84] [5.69] [19.48] Sym [10.97] [2.74] Sym [31.75] [24.84] [2.77] [30.56] [2.77] Sym [22.10] [5.69] [2.84] [1.37] M [12.34] [1.40] M [23.47] [2.84] [1.40] [20.70] M50 SUGGESTE PRINTE OR HOLE SIZES: [2.84] Suggest [1.14] Ø hole for contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners.
17 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE STEP EXMPLE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through M 25 F 59 R7 N T6 X / STEP 1 - asic series M series. STEP 2 - onnector Variants 9, 15, 25, 29, 37, 50 STEP 3 - onnector Gender M - Male F - Female STEP 4 - ontact Termination Type 2 - Solder cup. 3 - Solder, Straight Printed oard Mount with [3.81] Tail Length Solder, Straight Printed oard Mount with [9.52] Tail Length Solder, Straight Printed oard Mount with [12.70] tail length. 4 - Solder, Right ngle (90 ) Printed oard Mount with [11.43] ontact Extension. 5 - Solder, Right ngle (90 ) Printed oard Mount with [7.19] ontact Extension Solder, Right ngle (90 ) Printed oard Mount with [13.84] ontact Extension. 6 - Wrap Post. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. - racket, Mounting, Right ngle (90 ) Metal. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 7 - racket, Mounting, Right ngle (90 ) Plastic. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [5.71] Length. P2 - Threaded Post, Nylon, [5.71] Length. R - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R3 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole. R4 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads. R5 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [5.71] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, [5.71] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [9.53] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 32, 33, 4, 59 and 6 only. For more information on ferrite inductors, see page 7. * 3 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 4 For stainless steel dimpled male versions contact Technical Sales. * 5 N and hood are not available for connector variant 29. onsult Technical Sales for availability. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: M25F59R7NT6X STEP 8 - Shell Options 0 - Zinc plated, with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 3 V3 - Lock Tab, connector front panel mounted. * 3 V5 - Lock Tab, connector rear panel mounted. * 3 VL - Lock Lever, used with Hoods only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with Internal Hex for 3/32 Hex rives E6 - Rotating Male and Female Polarized Jackscrews. * 1 STEP 6 - Hoods and Push-On FastenerS 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. vailable in size 9, 15, 25, 37, and 50 only. * 5 N - Lightweight luminum Hood, nickel finish. * 5 - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9, 15, and 25 only. N - Push-on fastener for right angle (90 ) mounting brackets. * 2 F - Ferrite inductor. * 2 Q - Ferrite inductor for use with push-on fastener and right angle (90 ) mounting brackets. 10 M SERIES
18 INUSTRIL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub Size 20 ontacts, Fixed Posiand losed Entry IE Publication Performance Level One onsult Technical Sales for UL Recognition MX SERIES 11 MX series connectors are industrial quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IE , Performance Level One. MX series connectors utilize precision machined contacts which are fixed within the connector body. The female utilizes s unique Posiand closed entry contact system, see page 1 for details. MTERILS N FINISHES: Insulator: ontacts: ontact Plating: Shells: Mounting Spacers and rackets: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Hoods: Glass filled polyester per STM 5927, UL 94V-0, blue color. Precision machined copper alloy. Professional performance Gold flash over nickel plate. Other finishes available upon request. Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated; polyester. Phosphor bronze or beryllium copper with tin plate. rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Slide lock and lock tabs, steel with nickel plate. omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Fixed ontacts: ontact Retention In Insulator: MX SERIES TEHNIL HRTERISTIS Size 20 contact, female contact - Posiand closed entry design, see page 1 for details. 6 lbs. [27N] Five standard connector variants are offered in arrangements of 9, 15, 25, 37 and 50 contacts. Each variant is available with contact terminations for solder cup and straight and right angle (90 ) printed board mount terminations. MX series connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE and MIL-TL wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. ontact Solder cup contacts inch [1.06mm] Terminations: minimum hole diameter for 20 WG [0.5mm 2 ] wire maximum. Straight Printed oard Mount inch [0.71mm] termination diameter. Right ngle (90 ) Printed oard Mount inch [0.71mm] termination diameter for all printed board footprints. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Jackscrews and riveted fasteners with a ngle rackets: inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Printed oard: Rapid installation push-on fasteners and threaded posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 1000 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating, Tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: Insulation Resistance: Proof Voltage: learance and reepage istance [minimum]: Working Voltage: ohms maximum. 5 G ohms V r.m.s inch [1.0mm]. 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 10 days.
19 -Sub INUSTRIL QULITY FIXE ONTT STNR ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF FEMLE MX 9 MX 15 MX MX 37 MX 50 STNR SHELL SSEMLY M K 0.050±0.010 [1.27±0.25] G 10 E OPTIONL SHELL SSEMLY (0, 02) 0.036±0.008 [0.91±0.20] [5.59] Max. H Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) MX SERIES 0.120±0.010 [3.05±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] 9 S [30.81] [16.33] [24.99] [19.28] 15 S [39.14] [24.66] [33.32] [27.51] 25 S [53.04] [38.38] [47.04] [41.28] 37 S [69.32] [54.84] [63.50] [57.71] 50 S [66.93] [52.43] [61.11] [10.74] [15.37] [55.32] [13.56] 12
20 INUSTRIL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub Fixed female jackscrews SOLER UP TERMINTION OE 2 20 WG max. 2 [0.5 mm ] Fixed female jackscrew Fixed male jackscrew [3.43] [8.94] For solder cup contacts, specify code 2 in step 4 of ordering information. Typical Part Number: MX15S200T2Z Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: MX15S200T6Z MX SERIES OE NUMER L Ø [4.32] [0.71] [9.53] [0.71] [12.70] [0.71] For straight printed board mount contacts, specify code number in step 4 of ordering information. STRIGHT PRINTE OR MOUNT TERMINTION OE 3, 32 N 33 right angle (90 ) PRINTE OR MOUNT TERMINTION Ø0.125 [3.18] Swaged spacer with push-on fastener phosphor bronze [0.25] NOMINL L OE 4, [11.43] ONTT EXTENSION Fixed female jackscrews Ø Typical Part Number: MX25S3S60T0 MX**4**** [11.43] ONTT EXTENSION PRT NUMER * [5.71] MX9S4**** [30.58] [24.99] [12.85] [11.43] NOTE: Fixed female jackscrews ±0.008 [0.20] * 1 MX15S4**** MX25S4**** MX37S4**** [38.91] [52.63] [69.09] [33.32] [47.04] [63.50] [12.85] [12.85] [12.85] [11.43] [11.43] [11.43] * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. MX50S4**** [66.70] [61.11] [14.27] [11.43] Specify code 4 in step 4 of ordering information [2.84] Numbering shown is rear view of female [2.84] [2.84] [4.32] Nominal Typical Part Number: MX25S40T20 Ø0.028 [0.71] Typical Part Number: MX50S40T20 13
21 -Sub INUSTRIL QULITY FIXE ONTT STNR ENSITY -SUMINITURE right angle (90 ) PRINTE OR MOUNT TERMINTION OE 5, [7.19] ONTT EXTENSION MX**5**** [7.19] ONTT EXTENSION PRT NUMER * 1 MX9S5**** [30.58] [24.99] [8.61] [7.19] NOTE: Fixed female jackscrews ±0.008 [0.20] * 1 MX15S5**** MX25S5**** MX37S5**** [38.91] [52.63] [69.09] [33.32] [47.04] [63.50] [8.61] [8.61] [8.61] [7.19] [7.19] [7.19] * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. MX50S5**** [66.70] [61.11] [10.03] [7.19] [2.84] Specify code 5 in step 4 of ordering information [2.84] Numbering shown is rear view of female [2.84] Typical Part Number: MX25S5R4NT2X Push-on fastener beryllium copper Ø0.028 [0.71] [4.32] Nominal Typical Part Number: MX50S5R4NT2X MX SERIES right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN [12.50] Mount connector with mating face positioned to follow direction of arrow. Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] [1.37] [2.84] [4.11] [2.74] [2.84] [8.23] [1.40] [15.19] MX9 MX15 MX [2.84] SUGGESTE PRINTE OR HOLE SIZES: Suggest [1.14] Ø hole for contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with pushon fasteners. Sym [31.75] [24.84] [2.77] [1.40] MX [23.47] [2.84] [30.56] [2.77] [1.40] Sym. MX [22.10] [20.70] [2.84] [5.69] 14
22 INUSTRIL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub MX SERIES STEP EXMPLE STEP 1 - asic series MX series. ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP 2 - onnector Variants 9, 15, 25, 37, 50 STEP 3 - onnector Gender S - Female - Industrial Level Posiand closed entry contacts MX 25 S 5 R7 N T6 X / STEP 4 - ontact Termination Type 2 - Solder cup. 3 - Solder, Straight Printed oard Mount with [4.32] Tail Length. * Solder, Straight Printed oard Mount with [9.52] Tail Length. * Solder, Straight Printed oard Mount with [12.70] tail length. * Solder, Right ngle (90 ) Printed oard Mount with [11.43] ontact Extension. 5 - Solder, Right ngle (90 ) Printed oard Mount with [7.19] ontact Extension. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. - racket, Mounting, Right ngle (90 ) Metal. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 7 - racket, Mounting, Right ngle (90 ) Plastic. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [5.71] Length. P2 - Threaded Post, Nylon, [5.71] Length. R - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R3 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole. R4 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads. R5 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [5.71] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, [5.71] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [9.53] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 32, 33, 4, 59 and 6 only. For more information on ferrite inductors, see page 7. * 3 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 4 onsult technical sales for availability STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: MX25S5R7NT6X STEP 8 - Shell Options 0 - Zinc plated, with chromate seal. S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 3 V3 - Lock Tab, connector front panel mounted. * 3 V5 - Lock Tab, connector rear panel mounted. * 3 VL - Lock Lever, used with Hoods only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with Internal Hex for 3/32 Hex rives E6 - Rotating Male and Female Polarized Jackscrews. * 1 STEP 6 - Hoods and Push-On FastenerS 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. vailable in size 9, 15, 25, 37, and 50 only. N - Lightweight luminum Hood, nickel finish. - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9, 15, and 25 only. N - Push-on fastener for right angle (90 ) mounting brackets. * 2 F - Ferrite inductor. * 2 Q - Ferrite inductor for use with push-on fastener and right angle (90 ) mounting brackets. 15
23 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE Size 20 ontacts, Fixed European Standard Printed ircuit oard Layout IE Publication Performance Level Two UL Recognized File #E49351 Telecommunication UL File #E S Recognized File #LR54219 Euro- series connectors are professional quality connectors recommended for use in sheltered, noncorrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IE , Performance Level Two. Euro- series connectors utilize precision machined contacts which are fixed within the connector body. The female contact is an open entry design contact, precision machined of high tensile phosphor bronze. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Each Euro- connector variant is available with contact terminations for solder cup, wrap post and straight and right angle (90 ) printed board mount terminations per standard European metric footprints. Euro- series connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE and MIL-TL wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. MTERILS N FINISHES: Insulator: ontacts: ontact Plating: Shells: Mounting Spacers and rackets: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Nylon resin, UL 94V-0, black color. Precision machined copper alloy. Professional performance Gold flash over nickel plate. Other finishes available upon request. Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated; polyester. Phosphor bronze or beryllium copper with tin plate. rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Slide lock and lock tabs, steel with nickel plate. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: EURO- SERIES TEHNIL HRTERISTIS Fixed ontacts: Size 20 contact, male inch [1.02mm] mating diameter. Female contact - rugged open entry design. ontact Retention In Insulator: 6 lbs. [27N] Resistance To Solder 500 F [260 ] for 10 seconds duration per Iron Heat: IE ontact Solder cup contacts inch [1.06mm] Terminations: minimum hole diameter for 20 WG [0.5mm 2 ] wire maximum. Straight Printed oard Mount inch [0.61mm] termination diameter. Right ngle (90 ) Printed oard Mount inch [0.61mm] termination diameter for European Metric Footprints. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Jackscrews and riveted fasteners with a ngle rackets: inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Rapid installation push-on fasteners and Printed oard: threaded posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating: Initial ontact Resistance: Insulation Resistance: Proof Voltage: learance and reepage istance [minimum]: Working Voltage: 7.5 amperes nominal ohms maximum. 5 G ohms V r.m.s inch [1.0mm]. 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 10 days. 16 E SERIES
24 PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE E 9 E 15 E E 29 E 37 E STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H 0.036±0.008 [0.91±0.20] [5.59] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.05±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] E SERIES 9 M 9 F 15 M 15 F 25 M 25 F 29 M 29 F 37 M 37 F 50 M 50 F [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [44.96] [44.96] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [31.78] [54.84] [52.43] [16.92] [25.25] [38.96] [32.36] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [38.96] [38.96] [63.50] [63.50] [61.11] [61.11] [10.95] [10.74] [11.43] [11.20] [15.37] [15.37] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [33.58] [33.58] [57.71] [57.71] [55.32] [55.32] [13.69] [13.69] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [6.02] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] 17
25 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE 20 WG max. 2 [0.5 mm ] Fixed female jackscrews SOLER UP TERMINTION OE 2 Fixed female jackscrew Fixed male jackscrew [3.43] [8.94] For solder cup contacts, specify code 2 in step 4 of ordering information. Typical Part Number: E15M200T2Z Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: E15M200T6Z OE NUMER 36 STRIGHT PRINTE OR MOUNT TERMINTION L [5.99] Ø [0.61] For straight printed board mount contacts, specify code number in step 4 of ordering information. OE 36 Swaged spacer with push-on fastener phosphor bronze [0.25] NOMINL L Fixed female jackscrews Ø Typical Part Number: E25F36S60T [5.71] right angle (90 ) PRINTE OR MOUNT TERMINTION OE 42 N 52, [9.40] ONTT EXTENSION Ø0.125 [3.18] E**(42 or 52)**** [9.40] ONTT EXTENSION PRT NUMER * 1 NOTE: Fixed female jackscrews Specify code 42 or 52 in step 4 of ordering information ±0.008 [0.20] * [2.54] for code 42 contacts [2.84] for code 52 contacts E9*(42 or 52)**** E15*(42 or 52)**** E25*(42 or 52)**** E29*(42 or 52)**** E37*(42 or 52)**** E50*(42 or 52)**** [30.58] [38.91] [52.63] [44.55] [69.09] [66.70] Numbering shown is rear view of male and face view of female [24.99] [33.32] [47.04] [38.96] [63.50] [61.11] [10.67] [10.67] [10.67] [11.94] [10.67] [11.94] [9.40] [9.40] [9.40] [9.40] [9.40] [9.40] 14 * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used [2.54] for code 42 contacts [2.84] for code 52 contacts [5.01] Max [2.54] for code 42 contacts [2.84] for code 52 contacts E SERIES Typical Part Number: E25M420T2X Ø0.024 [0.60] Typical Part Number: E50M520T2X 18
26 PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE -Sub right angle (90 ) PRINTE OR MOUNT TERMINTION OE 44, [9.40] ONTT EXTENSION E**44**** [9.40] ONTT EXTENSION PRT NUMER * 1 E9*44**** [30.58] [24.99] [10.67] [9.40] NOTE: Fixed female jackscrews ±0.008 [0.20] * 1 E15*44**** E25*44**** E29*44**** [38.91] [52.63] [44.55] [33.32] [47.04] [38.96] [10.67] [10.67] [11.94] [9.40] [9.40] [9.40] * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 44 in step 4 of ordering information [2.54] E37*44**** E50*44**** [69.09] [66.70] Push-on fastener beryllium copper [63.50] [61.11] [10.67] [11.94] [9.40] [9.40] Ø0.024 [0.60] [5.01] Max [2.54] [2.54] Typical Part Number: E25M440NT2X Numbering shown is rear view of male and face view of female. Typical Part Number: E29M440NT2X right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN For code 42 and 52 contacts, mount connector with mating face positioned to follow direction of arrow. For code 44 contacts, mount connector with mating face positioned to oppose direction of arrow [12.50] Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] E SERIES Y [1.37] [19.48] Sym [1.40] X [2.74] X X [4.11] [8.23] [15.19] E9 E15 E [10.97] [2.74] Sym [31.75] [24.84] [2.77] [30.56] [2.77] Sym [22.10] Y X [1.37] [12.34] [1.40] [23.47] X [1.40] [20.70] X E29 E37 E50 19 SUGGESTE PRINTE OR HOLE SIZES: Suggest [1.02] Ø hole for contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners. OE NUMER X Y [2.84] [5.69] [2.54] [5.08] [2.54] [5.08] [2.84] [5.69]
27 -Sub PROFESSIONL QULITY FIXE ONTT STNR ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE E 9 M / STEP 1 - asic series E series. STEP 2 - onnector Variants 9, 15, 25, 29, 37, 50 STEP 3 - onnector Gender M - Male F - Female STEP 4 - ontact Termination Type 2 - Solder cup Solder, Straight Printed oard Mount with [5.99] Tail Length Solder, Right ngle (90 ) Printed oard Mount with [9.40] ontact Extension Solder, Inverted Right ngle (90 ) Printed oard Mount with [9.40] ontact Extension Solder, Right ngle (90 ) Printed oard Mount with [9.40] ontact Extension. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. - racket, Mounting, Right ngle (90 ) Metal. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 7 - racket, Mounting, Right ngle (90 ) Plastic. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [5.71] Length. P2 - Threaded Post, Nylon, [5.71] Length. R - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R3 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole. R4 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads. R5 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [5.71] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, [5.71] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [9.53] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 36 only. For more information on ferrite inductors, see page 7. * 3 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 4 For stainless steel dimpled male versions contact Technical Sales. * 5 N and hood are not available for connector variant 29. onsult Technical Sales for availability. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: E9M STEP 8 - Shell Options 0 - Zinc plated with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 3 V3 - Lock Tab, connector front panel mounted. * 3 V5 - Lock Tab, connector rear panel mounted. * 3 VL - Lock Lever, used with Hoods only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with Internal Hex for 3/32 Hex rives E6 - Rotating Male and Female Polarized Jackscrews. * 1 STEP 6 - Hoods and Push-On FastenerS 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. vailable in size 9, 15, 25, 37, and 50 only. * 5 N - Lightweight luminum Hood, nickel finish. * 5 - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9, 15, and 25 only. N - Push-on Fastener, for Right ngle (90 ) Mounting rackets. * 2 F - Ferrite inductor. * 2 Q - Ferrite inductor for use with Push-on Fastener and Right ngle (90 ) Mounting rackets. 20 E SERIES
28 PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub Size 20 ontacts, Removable IE Publication Performance Level Two UL Recognized S Recognized File #E49351 File #LR54219 Telecommunication UL File #E Soli- series connectors are professional quality connectors recommended for use in sheltered, noncorrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. This crimp removable contact connector will meet the Performance Level Two requirements of IE Soli- series connectors utilize precision machined contacts with closed barrel, crimp terminations. The female contact features a rugged open entry design. Other contact terminations such as solder cup and printed board terminations are also available. The removable contact feature provides for rapid assembly and permits contact repairs or wiring changes. Five standard contact variants are offered in arrangements of 9, 15, 25, 37 and 50 contacts. Soli- series connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE and MIL-TL wide assortment of cable support hoods and locking systems is available from stock. S SERIES MTERILS N FINISHES: Insulator: Glass filled nylon resin, UL 94V-0, black color. ontacts: Precision machined copper alloy. ontact Plating: Professional performance - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Push-On Fasteners: Phosphor bronze with tin plate. Jackscrew Systems: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 10 days. 21 SOLI- SERIES TEHNIL HRTERISTIS MEHNIL HRTERISTIS: Removable ontacts: ontact Retention In Insulator: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contacts, male inch [1.02mm] mating diameter. Female - rugged open entry design. 6 lbs. [27 N]. ontact Terminations: losed barrel crimp, wire sizes 18 WG [1.0mm 2 ] through 32 WG [0.03mm 2 ]. Straight printed board mount terminations. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Printed oard Mount: Rapid installation push-on fasteners. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating: 7.5 amperes nominal. Initial ontact Resistance: ohms maximum. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.0mm]. Working Voltage: 300 V r.m.s.
29 -Sub PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE S 9 S 15 S S 37 S STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H 0.036±0.008 [0.91±0.20] [11.10] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.05±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) [0.81] Ø Ø0.154 [3.91] Mounting hole, Total diametral float [ Ø ] two places (02 option) Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] S 9 M S 9 F S 15 M S 15 F S 25 M S 25 F S 37 M S 37 F S 50 M S 50 F [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [54.84] [52.43] [16.92] [25.25] [38.96] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [10.74] [11.20] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [5.84] [10.82] [10.82] [10.82] S SERIES 22
30 PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub REMOVLE RIMP ONTTS OE 1 N 12 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE ONTT MLE ONTT ø ø ø [4.32] Ø0.040 [1.02] [4.32] ø PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø F / 22 / 24 [0.5/0.3/0.25] [15.54] [1.14] [1.68] M / 22 / 24 [0.5/0.3/0.25] [15.70] [1.14] [1.68] F / 28 / 30 [0.12/0.08/0.05] [15.54] [0.66] [1.68] M / 28 / 30 [0.12/0.08/0.05] [15.70] [0.66] [1.68] Note: *75** contacts can not be used in the R series. PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76 µ] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27µ] gold over nickel by adding -15 suffix onto part number. Example: M The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. REMOVLE RIMP ONTTS 18 WG RIMP ONTTS 18 WG [1.0mm 2 ] contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE ONTT MLE ONTT Ø0.080 [2.03] [23.25] [23.55] Ø0.080 [2.03] Ø0.055 [1.40] [4.32] F7518 Ø0.040 [1.02] M [4.32] Ø0.055 [1.40] S SERIES PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76 µ] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27µ] gold over nickel by adding -15 suffix onto part number. Example: M For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
31 -Sub PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE STRIGHT PRINTE OR MOUNT TERMINTION OE 3 N 32 OE NUMER 3 32 For straight printed board mount contacts specify code number in Step 4 of ordering information. L [3.18] [4.78] Swaged spacer with push-on fastener phosphor bronze. L Nominal [0.61] Typical Part Number: S37F3S60T2X Fixed female jackscrews [11.10] onnectors esigned To ustomer Specifications -subminiature connectors can be modified to customer specifications. Examples: select loading of contacts for cost savings or to gain creepage and clearance distances; longer printed circuit board terminations; customer specified hardware; sealing for water resistance. ontact Technical Sales with your particular requirements. S SERIES 24
32 PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub STRIGHT PRINTE OR ONTT HOLE PTTERN [12.50] Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] [1.37] [2.84] [4.11] [2.74] [2.84] [8.23] [1.37] [15.19] S9 S15 S [2.84] Sym [31.75] [24.84] [2.77] [30.56] [2.77] Sym [22.10] [5.69] [1.40] [23.47] S [2.84] [1.40] [21.70] S [2.84] SUGGESTE PRINTE OR HOLE SIZES: Suggest [1.14] Ø hole for contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners. S37M3S600Z S25F3S600X S SERIES 25
33 -Sub PROFESSIONL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE S 15 F X / STEP 1 - asic series S series. STEP 2 - onnector Variants 9, 15, 25, 37, 50 STEP 3 - onnector Gender M - Male F - Female STEP 4 - ontact Termination Type 0 - ontacts ordered separately, see page rimp, 20 WG-24 WG [0.5mm mm 2 ] rimp, 26 WG-30 WG [0.12mm mm 2 ]. 3 - Solder, Straight Printed oard Mount with [3.18] Tail Length Solder, Straight Printed oard Mount with [4.78] Tail Length. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. F - Float Mounts, Universal. P - Threaded Post, rass, [11.10] Length. P2 - Threaded Post, Nylon, [11.10] Length. S - Swaged Spacer, 4-40 Threads, [11.10] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, [11.10] Length. * 1 STEP 6 - Hoods 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. N - Lightweight luminum Hood, nickel finish. - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9,15, and 25 only. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: S15F0000X STEP 8 - Shell Options 0 - Zinc Plated, with hromate Seal. * 3 S - Stainless steel, passivated. X - Tin Plated. Z - Tin Plated and impled (male connectors only). * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 2 V3 - Lock Tab, connector front panel mounted. * 2 V5 - Lock Tab, connector rear panel mounted. * 2 VL - Lock Lever, used with Hoods Only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 3 For stainless steel dimpled male versions contact Technical Sales. 2- rawing 3- Model For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page S SERIES
34 H SERIES Size 20 Signal and Thermocouple ontacts, Fixed Posiand losed Entry IE Publication Performance Level One MIL-TL UL Recognized File #E49351 Telecommunication UL File #E MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE S Recognized File #LR Sub Harmo- series connectors are military quality connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. pplicable fixed contact connectors are qualified to MIL-TL (see page 82 for more information) and meet the performance requirements of IE , Performance Level One. Harmo- series connectors utilize precision machined contacts which are fixed within the connector body. The female contact features s unique Posiand closed entry design, see page 1 for details. Five standard connector variants are offered in arrangements of 9, 15, 25, 37 and 50 contacts. Each connector variant is available with contact terminations for solder cup, wrap post and straight and right angle (90 ) printed board mount terminations with Inch and Metric footprints. Harmo- series connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE and MIL-TL wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. 27 MTERILS N FINISHES: Insulator: Glass filled P per STM--5948, SG-F, UL 94V-0, green color. ontacts: Precision machined copper alloy. ontact Plating: Military performance inch [1.27 µ] gold over copper plate. IE , Performance Level One - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc and cadmium plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers and rackets: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Hoods: HRMO- SERIES TEHNIL HRTERISTIS Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated; polyester. Phosphor bronze or beryllium copper with tin plate. rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Slide lock and lock tabs, steel with nickel plate. omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Fixed ontacts: Size 20 contact, male inch [1.02mm] mating diameter. Female contact - Posiand closed entry design, see page 1 for details. ontact Retention In Insulator: 9 lbs. [40 N]. Resistance To Solder 650 F [350 ] for 10 seconds duration per Iron Heat: IE ontact Terminations: Solder cup contacts inch [1.06mm] minimum hole diameter in solder style contact for 20 WG [0.5mm 2 ] wire maximum. Straight Printed oard Mount inch [0.71mm] termination diameter and inch [0.61mm] termination diameter. Right ngle (90 ) Printed oard Mount [0.71mm] termination diameter for Inch System footprint, and [0.61mm] termination diameter for European Metric footprint. Wrap Post inch [0.64mm] square Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To ngle Jackscrews and riveted fasteners with rackets: inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Rapid installation push-on fasteners an Printed oard: mounting posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 1000 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating, Tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.0mm]. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 56 days. THERMOOUPLE ONTTS: Straight and right angle (90 ) printed circuit board mount contacts are available, please contact Technical Sales for details. Size 20 crimp contacts are available in R series, see page 36 for details.
35 -Sub MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE ONTT VRINTS H SERIES FE VIEW OF MLE OR RER VIEW OF FEMLE H 9 H 15 H H H STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H 0.036±0.008 [0.91±0.20] [5.59] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.05±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] H 9 M H 9 S H 15 M H 15 S H 25 M H 25 S H 37 M H 37 S H 50 M H 50 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [54.84] [52.43] [16.92] [25.25] [38.96] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [10.74] [11.20] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [5.84] [10.82] [10.82] [10.82] 28
36 H SERIES MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE SOLER UP TERMINTION OE 2 -Sub For solder cup contacts, specify code 2 in step 4 of ordering information. Typical Part Number: H15M200T2Z Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: H15M200T6Z OE NUMER L STRIGHT PRINTE OR MOUNT TERMINTION OE 3, 32, 33, N 36 Ø [4.32] [0.71] [9.53] [0.71] Swaged spacer with push-on fastener phosphor bronze Fixed female jackscrews [12.70] [0.71] [6.00] [0.61] For straight printed board mount contacts, specify code no. in step 4 of ordering information [0.25] NOMINL L Ø Typical Part Number: H25S3S60T [5.71] WRP POST TERMINTION OE 6 Fixed female jackscrews [0.64] Sq. For wrap post contacts, specify code 6 in step 4 of ordering information [18.29] [12.57] Typical part number: H15S600T0 29 H25M6S50T0
37 -Sub MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE right angle (90 ) PRINTE OR MOUNT TERMINTION OE 5, [7.19] ONTT EXTENSION H**5**** [7.19] ONTT EXTENSION H SERIES PRT NUMER * 1 E Fixed female jackscrews ±0.008 [0.20] * 1 H9*5**** H15*5**** H25*5**** H37*5**** [30.58] [38.91] [52.63] [69.09] [24.99] [33.32] [47.04] [63.50] [8.61] [8.61] [8.61] [8.61] [7.19] [7.19] [7.19] [7.19] [2.84] [2.84] [2.84] [2.84] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. H50*5**** [66.70] [61.11] [10.03] [7.19] [2.84] [2.84] Specify code 5 in step 4 of ordering information [2.84] Numbering shown is rear view of male and face view of female [2.84] [4.06] Nominal Typical Part Number: H25M5R7NT2X Push-on fastener beryllium copper Ø0.028 [0.71] Typical Part Number: H50S5R7NTX right angle (90 ) PRINTE OR MOUNT TERMINTION OE 42, [9.40] ONTT EXTENSION Ø0.125 [3.18] H**42**** [9.40] ONTT EXTENSION PRT NUMER * 1 E H9*42**** [30.58] [24.99] [10.67] [9.40] [2.54] Fixed female jackscrews ±0.008 [0.20] * 1 H15*42**** H25*42**** H37*42**** H50*42**** [38.91] [52.63] [69.09] [66.70] [33.32] [47.04] [63.50] [61.11] [10.67] [10.67] [10.67] [11.94] [9.40] [9.40] [9.40] [9.40] [2.54] [2.54] [2.54] [2.54] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 42 in step 4 of ordering information E Numbering shown is rear view of male and face view of female. E E [5.00] Nominal Typical Part Number: H25M4230T2X Ø0.024 [0.61] Typical Part Number: H50M4230T2X 30
38 H SERIES MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrow. -Sub [12.50] Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] [1.37] X [2.74] X [1.40] X [4.11] [8.23] [15.19] H 9 H 15 H 25 Sym [31.75] [24.84] [2.77] [30.56] [2.77] Sym [22.10] Y [1.40] [23.47] H 37 X [1.40] [20.70] H 50 X SUGGESTE PRINTE OR HOLE SIZES: Suggest [0.99] Ø hole for [0.61] Ø contact termination positions. Suggest [1.14] Ø hole for [0.71] Ø contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners. OE NUMER X Y *Metric system, European contact hole pattern. 3, 5, 32, 33, 36 * [2.84] [2.54] [5.69] [5.08] NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file rawing 3- Model
39 -Sub MILITRY QULITY FIXE ONTT STNR ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 H SERIES STEP EXMPLE H 37 S T 0 / STEP 1 - asic series H series. STEP 2 - onnector Variants 9, 15, 25, 37, 50 STEP 3 - onnector Gender M - Male S - Female - Posiand closed entry contacts STEP 4 - ontact Termination Type 2 - Solder cup. 3 - Solder, Straight Printed oard Mount with [4.32] Tail Length Solder, Straight Printed oard Mount with [9.52] Tail Length Solder, Straight Printed oard Mount with [12.70] tail length Solder, Straight Printed oard Mount with [5.99] Tail Length Solder, Metric System Right ngle (90 ) Printed oard Mount with [9.40] ontact Extension. 5 - Solder, Right ngle (90 ) Printed oard Mount with [7.19] ontact Extension. 6 - Wrap Post. * 1 STEP 5 - Mounting STYLE 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [5.71] Length. P2 - Threaded Post, Nylon, [5.71] Length. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [5.71] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, [5.71] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [9.53] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 32, 33, 36 and 6 only. For more information on ferrite inductors, see page 7. * 3 For stainless steel dimpled male versions contact Technical Sales. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel [1.27µ] gold over copper. ONTT TEHNIL SLES FOR ORERING ETILS OF THE FOLLOWING: Other Special Requirements. Straight and Right ngle (90 ) Thermocouple printed circuit board mount contacts STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: H37S530T0 STEP 8 -SHELL OPTIONS 0 - Zinc Plated with hromate Seal. * 3 S - Stainless steel, passivated. X - Tin Plated. Z - Tin Plated and impled (male connectors only). - admium plated with hromate Seal * 1 STEP 7 - Locking and Polarizing Systems 0 - None. V3 - Lock Tab, connector front panel mounted. V5 - Lock Tab, connector rear panel mounted. VL - Lock Lever, used with Hoods Only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. * 1 STEP 6 - Hoods N PUSH-ON FSTENERS 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37 and 50 only. G - Hood, EMI/RFI, ie ast Zinc. N - Lightweight luminum Hood, nickel finish. - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable is size 9, 15, and 25 only. N - Push-on Fastener, for Right ngle (90 ) Mounting rackets. * 2 F - Ferrite Inductor. 32
40 MILITRY QULITY RIMP REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub R SERIES Size 20 Signal and Thermocouple ontacts, rimp Removable Posiand losed Entry IE Publication Performance Level One, MIL-TL & SE S39029 UL Recognized S Recognized File #E49351 File #LR54219 Telecommunication UL File #E Rhapso- series connectors are military quality connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. pplicable crimp removable contact connectors are qualified to MIL-TL and SE S39029 (see page 82 for more information), and will meet the performance requirements of IE , Performance Level One. Rhapso- series connectors utilize precision machined contacts with closed barrel, crimp terminations. The female utilizes s unique Posiand closed entry system, see page 1 for details. Rugged open entry female contacts are also available. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Rhapso- series connectors are mateable and compatible with all -subminiature connectors conforming to MIL-TL-24308, IE and IE wide assortment of cable support hoods and locking systems is available from stock. 33 RHPSO- SERIES TEHNIL HRTERISTIS MTERILS N FINISHES: Insulator: Glass filled P per STM--5948, SG-F, UL 94V-0, green color. ontacts: Precision machined copper alloy. ontact Plating: Military performance inch [1.27 µ] gold over nickel plate. IE , Performance Level One - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc and cadmium plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Jackscrew Systems: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Removable ontacts: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contact, male inch [1.02mm] mating diameter. Female - Posiand closed entry design, see page 1 for details. ontact Retention In Insulator: 9 lbs. [40 N]. ontact Terminations: losed barrel crimp, wire sizes 18 WG [1.0mm 2 ] through 30 WG [0.05mm 2 ]. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 1000 operations minimum per IE for Posiand closed entry female contact. ELETRIL HRTERISTIS: ontact urrent Rating, Tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.0mm]. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 21 days. THERMOOUPLE ONTTS: Size 20 crimp contacts are available, see page 36 for details. Printed circuit board mount contacts are available in H series, see page 27 for details.
41 -Sub MILITRY QULITY RIMP REMOVLE ONTT STNR ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE R 9 R 15 R R R STNR SHELL SSEMLY M K 0.050±0.010 [1.27±0.25] R 50 G R SERIES E 1 H 0.036±0.008 [0.91±0.20] [9.53] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.08±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] R 9 M R 9 S R 15 M R 15 S R 25 M R 25 S R 29 M R 29 S R 37 M R 37 S R 50 M R 50 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [44.96] [44.96] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [31.78] [54.84] [52.43] [16.92] [25.25] [38.96] [32.36] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [38.96] [38.96] [63.50] [63.50] [61.11] [61.11] [10.95] [10.74] [11.43] [11.20] [15.37] [15.37] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [33.58] [33.58] [57.71] [57.71] [55.32] [55.32] [13.69] [13.69] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [6.02] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] 34
42 MILITRY QULITY RIMP REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub REMOVLE RIMP ONTTS OE 1 N 12 contacts may be supplied with connector or ordered separately. QULIFIE TO SE S39029 R SERIES *MILITRY SPEIFITION ONTTS STNR FINISH: per SE S39029 specifications olor ode: Male ontact: ORNGE/LUE/WHITE FEMLe ontact: ORNGE/LUE/GRY [1.14] FEMLE contact LOSE ENTRY ESIGN [1.68] [13.67] [13.97] * olor ode Stainless Steel Shroud Ø0.040 [1.02] [ ] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. MLE contact * olor ode [ ] [1.14] [1.68] FEMLE PRT NUMER *M39029/ WIRE SIZE WG/[mm 2 ] 20 / 22 / 24 [0.5/0.3/0.25] is qualified to supply the legacy design, as well as, the Posiand design. If the requirement is for the Posiand design exclusively, notify sales at time of quotation for order placement when requesting M39029 contacts. MLE PRT NUMER *M39029/ WIRE SIZE WG/[mm 2 ] 20 / 22 / 24 [0.5/0.3/0.25] REMOVLE RIMP ONTTS OE 1 N 12 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M Ø FEMLE contact LOSE ENTRY ESIGN [1.68] [ ] MLE contact [13.67] [13.97] Ø0.040 [1.02] [ ] Ø [1.68] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø MLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø F / 22 / 24 [0.5/0.3/0.25] [1.14] M / 22 / 24 [0.5/0.3/0.25] [1.14] F / 28 / 30 [0.12/0.08/0.05] [0.69] M / 28 / 30 [0.12/0.08/0.05] [0.69] Note: F602*2 and M602* contacts can be used in the S series. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
43 -Sub MILITRY QULITY RIMP REMOVLE ONTT STNR ENSITY -SUMINITURE REMOVLE RIMP ONTTS 18 WG RIMP ONTTS 18 WG [1.0mm 2 ] contacts may be supplied with connector or ordered separately. The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. Ø0.055 [1.40] Ø0.080 [2.03] FEMLE contact LOSE ENTRY ESIGN [23.24] [4.55] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. Note: F60182 and M6018 contacts can be used in the OR series. Ø0.040 [1.02] MLE contact [23.55] [4.55] Ø0.055 [1.40] Ø0.080 [2.03] R SERIES FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] MLE PRT NUMER WIRE SIZE WG/[mm 2 ] F [1.0] max M [1.0] max PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M REMOVLE THERMOOUPLE RIMP ONTT contacts may be supplied with connector or ordered separately. FEMLE contact LOSE ENTRY ESIGN [13.67] [13.97] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number.. male contact Ø * olor ode * olor ode Ø TYPE MTERIL FEMLE PRT NUMER Ø MLE PRT NUMER [ ] OLOR OE Ø0.040 [1.02] [ ] WIRE SIZE WG [mm 2 ] Ø Ø 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] F60202H M6020H HROMEL (+) WHITE F60262H M6026H K 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] LUMEL (-) F60202L M6020L 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] GREEN F60262L M6026L 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] T OPPER (+) F60202U M6020U 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] RE with gold flash F60262U M6026U 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] F60202O M6020O 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] ONSTNTN (-) YELLOW F60262O M6026O 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] E HROMEL (+) F60202H M6020H 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] WHITE F60262H M6026H 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] ONSTNTN (-) F60202O M6020O 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] YELLOW F60262O M6026O 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] imensionally equivalent to M39029/ imensionally equivalent to M39029/ Ø For more information on the availability of Type J thermocouple contacts, and information about thermocouple contacts with printed circuit board solder termination, please contact Technical Sales. hromel and lumel are registered trademarks of Hoskins Manufacturing ompany. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
44 MILITRY QULITY RIMP REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE R 25 S 1 0 J VL 0 / R SERIES STEP 1 - asic series R series. STEP 2 - onnector Variants 9, 15, 25, 29, 37, 50 STEP 3 - onnector Gender M - Male S - Female - Posiand closed entry contacts STEP 4 - ontact Termination Type 0 - ontacts ordered separately, see pages rimp, 20 WG-24 WG [0.5mm mm 2 ] rimp, 26 WG-30 WG [0.12mm mm 2 ]. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. F - Float Mounts, Universal. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. * 1 STEP 6 - Hoods 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. vailable in size 9, 15, 25, 37, and size 50 only. * 3 N - Lightweight luminum Hood, nickel finish. * 3 - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9,15, and 25 only. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 For stainless steel dimpled male versions contact Technical Sales. * 3 N and hood are not available for connector variant 29. onsult Technical Sales for availability. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel [1.27µ] gold over copper. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: R25S10JVLO STEP 8 -SHELL OPTIONS 0 - Zinc Plated with hromate Seal. * 2 S - Stainless steel, passivated. X - Tin Plated. Z - Tin Plated and impled (male connectors only). - admium plated with hromate Seal. * 1 STEP 7 - Locking and Polarizing Systems 0 - None. V3 - Lock Tab, connector front panel mounted. V5 - Lock Tab, connector rear panel mounted. VL - Lock Lever, used with Hoods Only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page rawing 3- Model
45 -Sub PROFESSIONL / INUSTRIL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE Size 20 Signal and Thermocouple ontacts, rimp Removable Two Performance Levels For est ost / Performance Ratio IE Publication Performance Level Two - Professional Performance Level One - Industrial OR series connectors are professional / industrial quality connectors with closed barrel crimp removable contacts. OR series connectors are recommended for use in sheltered, mildly corrosive environments having a wide range of temperatures with normal ventilation where high performance is required. OR series connectors utilize precision-machined contacts to provide durability. Female contacts feature the low cost, high performance rugged open entry design, meeting the performance requirements of MTERILS N FINISHES: OR SERIES TEHNIL HRTERISTIS Insulators: Glass filled P per STM--5948, SG-F, UL 94V-0, green color. ontacts: Precision machined copper alloy. ontact Plating: Industrial performance - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Jackscrew Systems: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Removable ontacts: ontact Retention In Insulator: ontact Terminations: Shells: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contact, male inch [1.02mm] mating diameter. Female contacts - rugged open entry design or Posiand closed entry design, see page 1 for details. 9 lbs. [40 N]. losed barrel crimp, wire sizes 18 WG [1.0mm 2 ] through 24 WG [0.25mm 2 ]. Tin-plated male shells may be dimpled for EMI/ ES ground paths. IE , Performance Level Two. Female Posiand closed entry contacts are optional and meet IE 807-3, Performance Level One. Six standard contact variants are offered in arrangements of 9, 15, 25, 29, 37, and 50 contacts. OR series connectors are mateable and compatible with all -Subminiature connectors conforming to MIL-TL-24308, IE , and IE wide assortment of cable support hoods and locking systems is available from stock. Polarization: Locking Systems: Mechanical Operations: ELETRIL HRTERISTIS: Trapezoidally shaped shells and polarized jackscrews. Jackscrews and vibration locking systems. 500 operations minimum per IE for rugged open entry design operations minimum per IE for Posiand closed entry female contact. ontact urrent Rating: Open Entry ontacts: 7.5 amperes nominal losed Entry ontacts, tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum for open entry ohms maximum for closed entry Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.0mm]. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: amp Heat, Steady State: -55 to days. THERMOOUPLE ONTTS: Size 20 crimp contacts are available. See page 41 for details. Printed circuit board mount contacts are available in H series, see page 27 for details. 38 OR SERIES
46 PROFESSIONL / INUSTRIL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE OR 9 OR OR OR OR 37 OR STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H OR SERIES OPTIONL SHELL SSEMLY (0, 02) 0.036±0.008 [0.91±0.20] [9.53] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.08±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) [0.81] Ø [ Ø0.154 [3.91] Mounting hole, Total diametral float Ø ] two places (02 option) Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] OR 9 M OR 9 F OR 9 S OR 15 M OR 15 F OR 15 S OR 25 M OR 25 F OR 25 S OR 29 M OR 29 F OR 29 S OR 37 M OR 37 F OR 37 S OR 50 M OR 50 F OR 50 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [44.96] [44.96] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [31.78] [54.84] [52.43] [16.92] [25.25] [38.96] [32.36] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [38.96] [38.96] [63.50] [63.50] [61.11] [61.11] [10.95] [10.74] [11.43] [11.20] [15.37] [15.37] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [33.58] [33.58] [57.71] [57.71] [55.32] [55.32] [13.69] [13.69] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [6.02] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] 39
47 -Sub PROFESSIONL / INUSTRIL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE REMOVLE RIMP ONTTS OE 1 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE contact LOSE ENTRY ESIGN MLE contact [1.68] [13.67] [13.97] [1.68] Ø Ø0.040 [1.02] Ø [ ] [ ] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø MLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø F / 22 / 24 [0.5/0.3/0.25] [1.14] M / 22 / 24 [0.5/0.3/0.25] [1.14] F / 28 / 30 [0.12/0.08/0.05] [0.69] M / 28 / 30 [0.12/0.08/0.05] PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M [0.69] OR SERIES REMOVLE RIMP ONTTS OE 1 contacts may be supplied with connector or ordered separately. FEMLE contact RUGGE Open Entry ESIGN Ø0.045 [1.14] [13.67] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. Ø0.066 [1.68] [ ] FEMLE PRT NUMER F6120 WIRE SIZE WG/[mm 2 ] 20 / 22 / 24 [0.5/0.3/0.25] PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: F For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
48 PROFESSIONL / INUSTRIL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE -Sub The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. *FEMLE contact Rugged Open Entry ESIGN REMOVLE RIMP ONTTS 18 WG RIMP ONTTS 18 WG [1.0mm 2 ] contacts may be supplied with connector or ordered separately. MLE ONTT Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. Ø0.080 [2.03] Ø0.080 [2.03] F6118 M6018 * FEMLE POSIN LOSE ENTRY ontacts RE VILLE, SEE PGE 36 FOR ETILS. PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M OR SERIES Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. REMOVLE THERMOOUPLE RIMP ONTTS contacts may be supplied with connector or ordered separately. FEMLE contact LOSE ENTRY ESIGN male contact [13.67] [13.97] Ø * olor ode * olor ode Ø Ø Ø0.040 [1.02] Ø [ ] [ ] TYPE MTERIL FEMLE PRT NUMER MLE PRT NUMER OLOR OE WIRE SIZE WG [mm 2 ] Ø Ø 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] F60202H M6020H HROMEL (+) WHITE F60262H M6026H K 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] LUMEL (-) F60202L M6020L 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] GREEN F60262L M6026L 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] T OPPER (+) F60202U M6020U 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] RE with gold flash F60262U M6026U 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] F60202O M6020O 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] ONSTNTN (-) YELLOW F60262O M6026O 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] E HROMEL (+) F60202H M6020H 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] WHITE F60262H M6026H 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] ONSTNTN (-) F60202O M6020O 20 / 22 / 24 [0.5 / 0.3 / 0.25] [1.68] [1.14] YELLOW F60262O M6026O 26 / 28 / 30 [0.12 / 0.08 / 0.05] [1.23] [0.69] imensionally equivalent to M39029/ imensionally equivalent to M39029/ For more information on the availability of Type J thermocouple contacts, and information about thermocouple contacts with printed circuit board solder termination, please contact Technical Sales. hromel and lumel are registered trademarks of Hoskins Manufacturing ompany. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
49 -Sub PROFESSIONL / INUSTRIL QULITY REMOVLE ONTT STNR ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE OR 9 M Z / STEP 1 - asic series OR series STEP 2 - onnector Variants 9, 15, 25, 29, 37, 50 STEP 3 - onnector Gender M - Male F - Female - Professional Level open entry contacts S - Female - Industrial Level Posiand closed entry contacts STEP 4 - ontact Termination Type 0 - ontacts ordered separately, see pages rimp, 20 WG-24 WG [0.5mm mm 2 ]. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: OR9M0000Z * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. F - Float Mounts, Universal. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. STEP 8 - Shell Options 0 - Zinc plated, with chromate seal. - admium plated with chromate seal. * 3 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). OR SERIES * 1 STEP 6 - Hoods 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 50 only. Z - Hood, Top or Side Opening, Robust Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. vailable in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, ie ast Zinc. vailable in size 9, 15, 25, 37, and 50 only. * 4 N - Lightweight luminum Hood, nickel finish. * 4 - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 9, 15, and 25 only. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 VL, V3 and V5 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 3 For stainless steel dimpled male versions contact Technical Sales. * 4 N and hood are not available for connector variant 29. onsult Technical Sales for availability. * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 2 V3 - Lock Tab, connector front panel mounted. * 2 V5 - Lock Tab, connector rear panel mounted. * 2 VL - Lock Lever, used with Hoods Only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page rawing 3- Model 42
50 PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub Size 22 ontacts, Removable rimp and Solder Printed oard Mount Two Performance Levels For est ost / Performance Ratio UL Recognized S Recognized File #E49351 File #LR54219 Telecommunication UL File #E O series connectors are professional / industrial quality high density connectors recommended for use in sheltered, non-corrosive indoor environments having normal ventilation. O series connectors utilize precision machined, removable contacts having closed barrel crimp terminations and solder cup wire terminations. For printed board mount application, straight solder printed board mount and right angle (90 ) angled solder terminations are available. Six standard contact variants are offered in arrangements of 15, 26, 44, 62, 78, and 104 contacts. O series connectors are mateable and compatible with other high density -subminiature connectors conforming to MIL-TL-24308, and are UL and S recognized. wide variety of unique accessories are available. O SERIES MTERILS N FINISHES: Insulators: Glass filled polyester per STM 5927, UL 94V-0, black color. ontacts: Precision machined copper alloy. ontact Plating: Professional quality - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Push-On Fasteners: Phosphor bronze or beryllium copper with tin plate. Jackscrew Systems: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. 43 MEHNIL HRTERISTIS: Removable ontacts: Fixed ontacts, oard Mounted pplications: ontact Retention In Insulator: ontact Terminations: O SERIES TEHNIL HRTERISTIS Insert contact to rear face of insulator and release from rear face of insulator. Size 22 contact, male inch [0.76mm] mating diameter. Female - rugged open entry design or Posiand closed entry design, see page 1 for details. Female open entry contacts - both rugged and standard design available to customer requirements. losed entry contacts are Posiand design, see page 1 for details. 9 lbs. [40 N]. losed barrel crimp, wire sizes 22 WG [0.3mm 2 ] through 30 WG [0.05mm 2 ]. Solder cup wire, inch [0.89mm] hole diameter for 22 WG [0.3mm 2 ] wire maximum inch [0.5mm] or inch [0.76mm] termination diameter straight and Right ngle (90 ) printed board mount contact terminations. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Jackscrews and riveted fasteners with ngle rackets: inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Printed oard: Rapid installation push-on fasteners and mounting posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IE for open entry female contact operations minimum per IE for Posiand closed entry female contact. ELETRIL HRTERISTIS: ontact urrent Rating: Open Entry ontacts: 5 amperes nominal losed Entry ontacts, tested per UL 1977: 12 amperes, 2 contacts energized. 10 amperes, 6 contacts energized. 7.5 amperes, 26 contacts energized. 6.5 amperes, 62 contacts energized. 5.0 amperes, 104 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum for open entry ohms maximum for closed entry. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.06mm]. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 10 days.
51 -Sub PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE O 15 O 26 O O 62 O 78 O 104 STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H [9.53]* Max. * This dimension is for crimp removable connectors [5.59] maximum for all other connectors. OPTIONL SHELL SSEMLY [0, 02] 0.036±0.008 [0.91±0.20] Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS [F] 0.120±0.010 [3.08±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) [0.81] Ø Ø0.154 [3.91] Mounting hole, Total diametral float [ Ø ] two places (02 option) Mounting hole, two places ONNETOR VRINT SIZES O 15 M O 15 F O 15 S O 26 M O 26 F O 26 S O 44 M O 44 F O 44 S O 62 M O 62 F O 62 S O 78 M O 78 F O 78 S O 104 M O 104 F O 104 S ±0.015 [0.38] [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [69.32] [69.32] [16.33] [24.66] [38.38] [54.84] [52.43] [55.60] [16.92] [25.25] [38.96] [55.42] [52.81] [56.18] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [63.50] [63.50] [10.74] [12.32] [11.20] [12.78] E ±0.015 [0.38] [15.37] [15.37] [16.97] [16.97] G ±0.010 [0.25] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [58.47] [58.47] H ±0.010 [0.25] [13.56] [13.56] [15.14] [15.14] K [5.92] [5.92] [5.84] [5.84] [5.84] [5.84] M ±0.010 [0.25] [10.82] [10.82] [10.82] [10.82] O SERIES 44
52 PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub REMOVLE RIMP ONTTS OE 1 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE ONTT MLE ONTT Ø Ø Ø [3.81] Ø0.030 [0.76] [3.81] Ø Part Number: F8122 Part Number: M8022 FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø MLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø F / 24 / 26 / 28 / 30 [0.3/0.25/0.12/0.08/0.05] [13.44] [0.89] [1.19] M / 24 / 26 / 28 / 30 [0.3/0.25/0.12/0.08/0.05] [13.49] [0.89] [1.19] PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M REMOVLE RIMP ONTTS OE 1 contacts may be supplied with connector or ordered separately. O SERIES Ø0.035 [0.89] FEMLE contact LOSE ENTRY ESIGN Ø0.047 [1.19] [13.21] [3.81] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE PRT NUMER F80222 WIRE SIZE WG/[mm 2 ] 22 / 24 / 26 / 28 / 30 [0.3/0.25/0.12/0.08/0.05] PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76 Ì] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: F For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
53 -Sub PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. REMOVLE RIMP ONTTS 20 WG ONTTS 20 WG [0.5 mm 2 ] contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. *FEMLE ONTT MLE ONTT Ø Ø Ø [4.55] Part Number: F8120 Ø0.030±0.001 [0.75±0.03] Part Number: M [4.55] Ø FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø MLE PRT NUMER WIRE SIZE WG/[mm 2 ] Ø Ø F [0.5] max [21.64] [1.14] [1.68] M [0.5] max [21.66] [1.14] [1.68] * FEMLE POSIN LOSE ENTRY ontacts RE VILLE, SEE PGE 56 FOR ETILS. PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M REMOVLE THERMOOUPLE RIMP ONTTS contacts may be supplied with connector or ordered separately. FEMLE contact LOSE ENTRY ESIGN male ontact Ø0.047 [1.19] [13.21] * olor ode [13.49] * olor ode Ø0.047 [1.19] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. TYPE K T E MTERIL FEMLE PRT NUMER Ø0.035 [0.89] MLE PRT NUMER [3.81] OLOR OE* HROMEL (+) F80222H M8022H WHITE LUMEL (-) F80222L M8022L GREEN OPPER (+) with gold flash F80222U M8022U RE ONSTNTN (-) F80222O M8022O YELLOW HROMEL (+) F80222H M8022H WHITE ONSTNTN (-) F80222O M8022O YELLOW Ø0.030 [0.76] [3.81] WIRE SIZE WG [mm 2 ] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] Ø0.035 [0.89] For more information on the availability of Type J thermocouple contacts, please contact Technical Sales. For more information about thermocouple contacts with printed circuit board solder termination, please contact Technical Sales. hromel and lumel are registered trademarks of Hoskins Manufacturing ompany O SERIES For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
54 PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub REMOVLE SOLER UP ONTTS OE 2 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE ONTT MLE ONTT [13.44] [13.48] ø0.047 [1.20] Ø0.047 [1.20] Ø0.035 [0.90] [3.81] Part Number: FS8122 ø0.030 [0.77] Part Number: MS [3.81] ø0.035 [0.88] PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: FS inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: MS REMOVLE SOLER UP ONTTS OE 2 contacts may be supplied with connector or ordered separately. O SERIES Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. Ø0.035 [0.89] Ø0.047 [1.19] FEMLE contact LOSE ENTRY ESIGN [13.21] [3.81] FEMLE PRT NUMER FS80222 WIRE SIZE WG/[mm 2 ] 22 [0.3] max PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: FS inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: FS For information regarding INSERTION & REMOVL TOOLS, see page
55 -Sub PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE FIXE SOLER UP TERMINTION OE [5.59] Max. 22 WG max. [0.5 mm ] Fixed female jackscrews [2.08] [3.68] Typical Part Number: O26F2100T2X Fixed female jackscrew Fixed male jackscrew Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: O26F2100T6X STRIGHT PRINTE OR MOUNT TERMINTION OE 3 N 32 ode No Swaged spacer with push-on fastener phosphor bronze [3.81] [7.62] [0.25] Nominal For straight printed board mount contacts specify code no. in step 4 of ordering information L L Fixed female jackscrew Ø0.020 [0.51] Typical Part Number: O62F3S60T6X Fixed male jackscrew [5.72] O SERIES 48
56 PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub right angle (90 ) PRINTE OR MOUNT TERMINTION [5.59] Max. OE 5, [11.43] ONTT EXTENSION O**5**** [11.43] ONTT EXTENSION PRT NUMER * 1 See next page for size 104 Right ngle (90 ) onnectors. O15*5**** [30.58] [24.99] [13.41] [11.43] NOTE: Fixed female jackscrews ±0.008 [0.20] * 1 O26*5**** O44*5**** O62*5**** [38.91] [52.63] [69.09] [33.32] [47.04] [63.50] [13.41] [13.41] [13.41] [11.43] [11.43] [11.43] * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 5 in step 4 of ordering information O78*5**** [66.70] Numbering shown is rear view of male and face view of female [61.11] [14.55] [11.43] [2.08] [2.08] [2.08] Typical Part Number: O44M5R7NT2X [1.98] [1.98] Push-on fastener beryllium copper Ø0.020 [0.51] [3.18] Nominal Typical Part Number: O78M5R7NT [5.59] Max. right angle (90 ) PRINTE OR MOUNT TERMINTION OE 4, [7.98] ONTT EXTENSION O**4**** [7.98] ONTT EXTENSION PRT NUMER * 1 See next page for size 104 Right ngle (90 ) onnectors. O SERIES Fixed female jackscrews ±0.008 [0.20] * 1 O15*4**** O26*4**** O44*4**** O62*4**** [30.58] [38.91] [52.63] [69.09] [24.99] [33.32] [47.04] [63.50] [10.52] [10.52] [10.52] [10.52] [7.98] [7.98] [7.98] [7.98] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 4 in step 4 of ordering information O78*4**** [66.70] Numbering shown is rear view of male and face view of female [61.11] [10.52] [7.98] [2.54] [2.54] [2.54] Typical Part Number: O44S4R7NT2X [2.54] [2.54] Push-on fastener beryllium copper Ø0.030 [0.76] [3.18] Nominal Typical Part Number: O78M4R7NT20 49
57 -Sub PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE right angle (90 ) PRINTE OR MOUNT TERMINTION OE 5, [11.43] ONTT EXTENSION ONTT VRINT 104 Fixed female jackscrews Typical Part Number: O104M5R7NT2X [15.60] [5.59] Max. Specify code 5 in step 4 of ordering information [11.43] 2.500±0.008 [63.50±0.20] [69.09] * 1 Numbering shown is rear view of male and face view of female NOTE: [2.08] [3.18] Nominal Push-on fastener, beryllium copper Ø0.020 [0.51] * 1 imension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. right angle (90 ) PRINTE OR MOUNT TERMINTION OE 4, [7.98] ONTT EXTENSION ONTT VRINT 104 Fixed female jackscrews Typical Part Number: O104M4R7NT2X Specify code 4 in step 4 of ordering information [7.98] [13.06] 2.500±0.008 [63.50±0.20] [69.09] * [5.59] Max. Numbering shown is rear view of male and face view of female O SERIES NOTE: [2.54] [3.18] Nominal Ø0.030 [0.76] Push-on fastener, beryllium copper * 1 imension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. 50
58 PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub O15 MLE right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrows [24.99] [24.99] O15 FEMLE [12.50] [4.83] [12.50] [5.46] [2.29] [2.29] O26 MLE O26 FEMLE [33.32] [33.32] [16.66] [9.65] [16.66] [9.78] [2.29] [2.29] O44 MLE [47.04] [47.04] O44 FEMLE [23.52] [16.51] [23.52] [16.64] O62 MLE [2.29] [2.29] O62 FEMLE [63.50] [63.50] [31.75] [24.71] [31.75] [24.77] [2.41] [2.41] O78 MLE O78 FEMLE [61.11] [61.11] O SERIES [30.56] [22.94] [2.41] [30.56] [2.41] [22.94] O104 MLE [63.50] [63.50] O104 FEMLE [31.75] [24.92] [31.75] [24.56] [2.41] [2.41] SUGGESTE PRINTE OR HOLE SIZES: Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners. OE NUMER Ø [2.54] [2.54] [1.14] [2.54] 51 3, 32, [1.98] [2.08] [0.89] [3.12]
59 -Sub PROFESSIONL / INUSTRIL QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE STEP 1 - asic series O series STEP 2 - onnector Variants 15, 26, 44, 62, 78, 104 STEP 3 - onnector Gender M - Male F - Female - Professional Level open entry contacts S - Female - Industrial Level Posiand closed entry contacts O 62 F 5 R7 N T6 S / STEP 4 - ontact Termination Type 0 - ontacts ordered separately, see pages rimp, 22 WG-30 WG [0.3mm mm 2 ]. 2 - Removable, solder cup, 22 WG-30 WG [0.3mm mm 2 ] Fixed, solder cup, 22 WG-30 WG [0.3mm mm 2 ]. 3 - Solder, Straight Printed oard Mount with [3.81] Tail Length Solder, Straight Printed oard Mount with [7.62] Tail Length. 4 - Solder, Right ngle (90 ) Printed oard Mount with [7.98] ontact Extension. 5 - Solder, Right ngle (90 ) Printed oard Mount with [11.43] ontact Extension. * 1 STEP 5 - Mounting Style 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [5.71] Length. P2 - Threaded Post, Nylon, [5.71] Length. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [5.71] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fasteners, 4-40 Threads, [5.71] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [9.53] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 32 and 5 only. For more information on ferrite inductors, see page 7. * 3 VL, V3 and V5 locking systems are not available for connector variants 62, 78 and 104. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 4 For stainless steel dimpled male versions contact Technical Sales. -14 STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: O62F5R7NT6S STEP 8 - Shell Options 0 - Zinc plated with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 3 V3 - Lock Tab, connector front panel mounted. * 3 V5 - Lock Tab, connector rear panel mounted. * 3 VL - Lock Lever, used with Hoods Only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. * 1 STEP 6 - Hoods 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 78 and 104 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 78 and 104 only. Z - Hood, Top or Side Opening, Robust Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 15, 26, 44, 62 and 78 only. H - Hood, Top Opening, Metal. vailable in size 26, 44, 62, and 78 only. G - Hood, EMI/RFI, ie ast Zinc. N - Lightweight luminum Hood, nickel finish. - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 15, 26, and 44 only. N - Push-on Fastener, for Right ngle (90 ) Mounting. * 2 F - Ferrite Inductor. * 2 Q - Ferrite Inductor with Push-on Fastener, for Right ngle (90 ) Mounting rackets. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page O SERIES
60 MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub Size 22 Signal and Thermocouple ontacts, Removable rimp and Printed oard Mount Posiand losed Entry MIL-TL and SE S39029 UL Recognized S Recognized File #E49351 File #LR54219 Telecommunication UL File #E ensi- series connectors are military quality, high density connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. pplicable connectors are qualified to MIL-TL and SE S39029 (see page 82 for more information). ensi- series connectors utilize precision machined contacts with closed barrel crimp terminations, solder cup terminations, straight and right angle (90 ) printed board mount. ll female contacts utilize s unique Posiand closed entry design, see page 1 for details. Six standard contact variants are offered in arrangements of 15, 26, 44, 62, 78 and 104 contacts. ensi- series connectors are mateable and compatible with other high density -subminiature connectors conforming to MIL-TL wide variety of unique accessories are available. SERIES MTERILS N FINISHES: ENSI- SERIES TEHNIL HRTERISTIS Insulators: Glass filled polyester per STM 5927, UL 94V-0, blue color. ontacts: Precision machined copper alloy. ontact Plating: Military performance inch [1.27 µ] gold over nickel plate. Industrial performance - gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers: Nylon; copper alloy or steel with zinc plate and chromate seal or tin plate; phosphor bronze with tin plate; stainless steel, passivated. Push-On Fastener: Phosphor bronze or beryllium copper with tin plate. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Jackscrew Systems: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Hoods: omposite and plastic, UL 94V-0; brass or steel with zinc plate and chromate seal. luminum; aluminum with electroless nickel plate. For aluminum hoods, zinc content is 1% maximum. ie cast zinc. Low magnetic versions are available, contact Technical Sales. 53 MEHNIL HRTERISTIS: Removable ontacts: ontact Retention In Insulator: ontact Terminations: Insert contact to rear face of insulator and release from rear face of insulator. Size 22 contacts, male inch [0.76mm] mating diameter. Female contacts - Posiand closed entry design, see page 1 for details. 9 lbs. [40 N]. losed barrel crimp, wire sizes 22 WG [0.3mm 2 ] through 30 WG [0.05mm 2 ] per IE Right ngle (90 ) Printed oard Mount contact terminations. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Jackscrews and riveted fasteners with ngle rackets: inch [3.05mm] clearance hole, and threaded riveted fasteners with 4-40 threads and polyester lock inserts. Mounting To Rapid installation push-on fasteners and Printed oard: mounting posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 1000 operations minimum per IE ELETRIL HRTERISTIS: ontact urrent Rating, Tested per UL 1977: 12 amperes, 2 contacts energized. 10 amperes, 6 contacts energized. 7.5 amperes, 26 contacts energized. 6.5 amperes, 62 contacts energized. 5.0 amperes, 104 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.06mm]. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to amp Heat, Steady State: 21 days. THERMOOUPLE ONTTS: Size 22 crimp contacts are available, see page 56 for details. Printed circuit board mount contacts are available, please onsult ccessories -subminiature catalog for details.
61 -Sub MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE ONTT VRINTS FE VIEW OF MLE OR RER VIEW OF FEMLE STNR SHELL SSEMLY 1 M K 0.050±0.010 [1.27±0.25] G 10 E 1 H 0.036±0.008 [0.91±0.020] [9.53] Max. Ø0.120 [Ø3.05±0.13] Mounting hole, two places OPTIONL SHELL SSEMLY (0, 02) OPTIONL SHELL SSEMLY WITH UNIVERSL FLOT MOUNTS (F) 0.120±0.010 [3.08±0.25] 0.050±0.020 [1.27±0.51] Ø0.120 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) Ø0.154 [3.91] Mounting hole, two places (02 option) [0.81] Total diametral float Ø [ Ø ] Mounting hole, two places ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] 15 M 15 S 26 M 26 S 44 M 44 S 62 M 62 S 78 M 78 S 104 M 104 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [69.32] [69.32] [16.33] [24.66] [38.38] [54.84] [52.43] [55.60] [16.92] [25.25] [38.96] [55.42] [52.81] [56.18] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [63.50] [63.50] [10.74] [12.32] [11.20] [12.78] [15.37] [15.37] [16.97] [16.97] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [58.47] [58.47] [13.56] [13.56] [15.14] [15.14] [5.92] [5.92] [5.84] [5.84] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] SERIES 54
62 MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub *MILITRY SPEIFITION ONTTS REMOVLE RIMP ONTT OE 1 contacts may be supplied with connector or ordered separately. QULIFIE TO SE S39029 Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. STNR FINISH: per SE S39029 specifications olor ode: Male ontact: ORNGE/LUE/LK FEMLe ontact: ORNGE/GREEN/YELLOW FEMLE contact LOSE ENTRY ESIGN Ø0.047 [1.19] [13.16] * olor ode MLE contact [13.49] * olor ode Ø0.047 [1.19] Ø0.035 [0.89] Stainless Steel Shroud [3.81] Ø0.030 [0.76] [3.81] Ø0.035 [0.89] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] MLE PRT NUMER WIRE SIZE WG/[mm 2 ] *M39029/ / 24 / 26 / 28 [0.3/0.25/0.12/0.08] *M39029/ / 24 / 26 / 28 [0.3/0.25/0.12/0.08] is qualified to supply the legacy design, as well as, the Posiand design. If the requirement is for the Posiand design exclusively, notify sales at time of quotation for order placement when requesting M39029 contacts. REMOVLE RIMP ONTT OE 1 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE contact LOSE ENTRY ESIGN Ø0.047 [1.19] [13.21] MLE contact [13.49] Ø0.047 [1.19] Ø0.035 [0.89] [3.81] Ø0.030 [0.76] [3.81] Ø0.035 [0.89] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] MLE PRT NUMER WIRE SIZE WG/[mm 2 ] F / 24 / 26 / 28 / 30 [0.3/0.25/0.12/0.08/0.05] M / 24 / 26 / 28 / 30 [0.3/0.25/0.12/0.08/0.05] SERIES PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page
63 -Sub MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE REMOVLE RIMP ONTT 20 WG ONTTS 20 WG [0.5 mm 2 ] contacts may be supplied with connector or ordered separately. The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. Note: F80202 and M8020 contacts can be used in the O series. Ø0.066 [1.68] FEMLE contact LOSE ENTRY ESIGN [21.41] Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. MLE ONTT [21.67] Ø0.066 [1.68] Ø0.045 [1.14] [4.55] Ø0.030 [0.76] [4.55] rimp area extends above connector molding. Ø0.045 [1.14] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] MLE PRT NUMER WIRE SIZE WG/[mm 2 ] F [0.5] max M [0.5] max PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: F inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: M REMOVLE THERMOOUPLE RIMP ONTT contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE contact LOSE ENTRY ESIGN Ø0.047 [1.19] [13.21] * olor ode male ontact [13.49] * olor ode Ø0.047 [1.19] Ø0.035 [0.89] [3.81] Ø0.030 [0.76] [3.81] Ø0.035 [0.89] TYPE K T E MTERIL FEMLE PRT NUMER MLE PRT NUMER OLOR OE* HROMEL (+) F80222H M8022H WHITE LUMEL (-) F80222L M8022L GREEN OPPER (+) F80222U M8022U RE ONSTNTN (-) F80222O M8022O YELLOW HROMEL (+) F80222H M8022H WHITE ONSTNTN (-) F80222O M8022O YELLOW WIRE SIZE WG [mm 2 ] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] 22 / 24 / 26 [ 0.3 / 0.25 / 0.12] For more information on the availability of Type J thermocouple contacts, please contact Technical Sales. For more information about thermocouple contacts with printed circuit board solder termination, please contact Technical Sales. hromel and lumel are registered trademarks of Hoskins Manufacturing ompany For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page 78. SERIES 56
64 MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub REMOVLE SOLER UP ONTTS OE 2 contacts may be supplied with connector or ordered separately. Note: onnectors can be kitted with all applicable crimp/solder contacts, contact Technical Sales for connector part number. FEMLE contact LOSE ENTRY ESIGN MLE ONTT Ø0.047 [1.19] [13.21] [13.49] Ø0.047 [1.19] Ø0.035 [0.89] [3.81] Ø0.030 [0.76] [3.81] Ø0.035 [0.89] FEMLE PRT NUMER WIRE SIZE WG/[mm 2 ] MLE PRT NUMER WIRE SIZE WG/[mm 2 ] FS [0.3] max MS [0.3]max PLating: STNR FINISH: Gold flash over nickel plate. optional FINISHES: [0.76] gold over nickel by adding -14 suffix onto part number. Example: FS inch [1.27] gold over nickel by adding -15 suffix onto part number. Example: MS For information regarding INSERTION & REMOVL TOOLS, see page 78. STRIGHT PRINTE OR MOUNT TERMINTION OE 3, 32 N 33 OE NUMER L Fixed female jackscrews [3.81] [7.62] (12.70] Swaged spacer with push-on fastener phosphor bronze [1.19] Nominal [9.53] SERIES For straight printed board mount contacts specify code no. in step 4 of ordering information. L [0.51] Typical Part Number: 62S3S60T2X 57
65 -Sub MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE right angle (90 ) PRINTE OR MOUNT TERMINTION OE 4, [11.43] ONTT EXTENSION **4**** [11.43] ONTT EXTENSION PRT NUMER * 1 Fixed female jackscrews ±0.008 [0.20] * 1 15*4**** 26*4**** 44*4**** 62*4**** 78*4**** [30.58] [38.91] [52.63] [69.09] [66.70] [24.99] [33.32] [47.04] [63.50] [61.11] [13.41] [13.41] [13.41] [13.41] [14.55] [11.43] [11.43] [11.43] [11.43] [11.43] NOTE: * 1 dimension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used. Specify code 4 in step 4 of ordering information Numbering shown is rear view of male and face view of female [2.08] [2.08] [2.08] Typical Part Number: 44M4R7NT2X [1.98] [1.98] Push-on fastener beryllium copper Ø0.020 [0.51] [3.18] Nominal Typical Part Number: 78M4R7NT2X right angle (90 ) PRINTE OR MOUNT TERMINTION, SIZE 104 OE 4, [11.43] ONTT EXTENSION Fixed female jackscrews NOTE: * 1 imension applies for metal angle brackets only. onsult ccessories -subminiature catalog for dimension when plastic brackets are used [15.60] [9.52] Max. Typical Part Number: 104M4R7NT20 Specify code 4 in step 4 of ordering information [11.43] 2.500±0.008 [63.50±0.20] [69.09] * 1 Numbering shown is rear view of male and face view of female [2.08] [3.17] Nominal Ø0.020 [0.51] Push-on fastener beryllium copper 58 SERIES
66 MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE -Sub right angle (90 ) N STRIGHT PRINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrows. 15 MLE 15 FEMLE [24.99] [12.50] [4.83] [1.98] [24.99] [12.50] [5.46] [1.98] [2.29] [1.98] [2.29] [1.98] 26 MLE 26 FEMLE [33.32] [33.32] [16.66] [9.65] [1.98] [16.66] [9.78] [1.98] [2.29] [1.98] [2.29] [1.98] 44 MLE 44 FEMLE [47.04] [47.04] [23.52] [16.51] [23.52] [16.64] [1.98] [1.98] [2.29] [1.98] [2.29] [1.98] 62 MLE 62 FEMLE [63.50] [63.50] [31.75] [24.71] [31.75] [24.77] [1.98] [1.98] [1.98] [1.98] [2.41] [2.41] 78 MLE 78 FEMLE [61.11] [61.11] [30.56] [22.94] [2.08] [30.56] [22.94] [2.08] [2.08] [2.08] [1.04] [2.08] [1.04] [2.08] [2.41] [2.41] 104 MLE [63.50] [63.50] 104 FEMLE [31.75] [24.92] [31.75] [24.56] [2.08] SERIES [2.41] [2.08] [2.41] SUGGESTE PRINTE OR HOLE SIZES: 59 Suggest [0.89] Ø hole for contact termination positions. Suggest ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners.
67 -Sub MILITRY QULITY FIXE N REMOVLE ONTTS HIGH ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE STEP 1 - asic series series STEP 2 - onnector Variants 15, 26, 44, 62, 78, 104 STEP 3 - onnector Gender M - Male S - Female - Posiand closed entry contacts 62 S 4 R7 N T6 S / STEP 4 - ontact Termination Type 0 - ontacts ordered separately, see pages rimp, 22 WG-30 WG [0.3mm mm 2 ]. 2 - Removable, Solder cup, 22 WG-30 WG [0.3mm mm 2 ]. 3 - Solder, Straight Printed oard Mount with [3.81] Tail Length Solder, Straight Printed oard Mount with [7.62] Tail Length Solder, Straight Printed oard Mount with [12.70] Tail Length. 4 - Solder, Right ngle (90 ) Printed oard Mount with [11.43] ontact Extension. * 1 STEP 5 - Mounting STYLE 0 - Mounting Hole, [3.05] Ø Mounting Hole, [3.91] Ø. 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. 8 - racket, Mounting, Right ngle (90 ) Plastic with ross ar. F - Float Mounts, Universal. P - Threaded Post, rass, [9.53] Length. P2 - Threaded Post, Nylon, [9.53] Length. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Spacer, 4-40 Threads, [9.53] Length. S2 - Swaged Spacer, 4-40 Threads, [3.18] Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fasteners, 4-40 Threads, [9.53] Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, [13.08] Length. * 1 For additional information on accessories listed in steps 5, 6 and 7, see ccessory atalog. * 2 Ferrite inductor is available on contact types 32 and 33 only. For more information on ferrite inductors, see page 7. * 3 VL, V3 and V5 locking systems are not available for connector variants 62, 78 and 104. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 4 For stainless steel dimpled male versions contact Technical Sales. * 1 STEP 6 - Hoods N PUSH-ON FSTENERS 0 - None. J - Hood, Top Opening, Plastic. L - Hood, Side Opening, Plastic. Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews. vailable in size 78 and 104 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. vailable in size 78 and 104 only. Z - Hood, Top or Side Opening, Robust and Extended Height, omposite and Plastic with Rotating Male Jackscrews. vailable in size 15, 26, 44, 62, and 78 only. H - Hood, Top Opening, Metal. vailable in size 26, 44, 62, and 78 only. G - Hood, EMI/RFI, ie ast Zinc. N - Lightweight luminum Hood, nickel finish. - Lightweight luminum Hood, no finish. W - Hood, Top or Side Opening, Plastic. vailable in size 15, 26, and 44 only. N - Push-on Fastener, for Right ngle (90 ) Mounting rackets. * 2 F - Ferrite Inductor -50 STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel [1.27µ] gold over copper. ONTT TEHNIL SLES FOR ORERING ETILS OF THE FOLLOWING: Other Special Requirements. Straight and Right ngle (90 ) Thermocouple printed circuit board mount contacts STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: 62S4R7NT6S STEP 8 -SHELL OPTIONS 0 - Zinc plated with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). - admium with chromate seal. * 1 STEP 7 - Locking and Polarizing Systems 0 - None. * 3 V3 - Lock Tab, connector front panel mounted. * 3 V5 - Lock Tab, connector rear panel mounted. * 3 VL - Lock Lever, used with Hoods only. T - Fixed Female Jackscrews. T2 - Fixed Female Jackscrews. T6 - Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E3 - Rotating Male with internal hex for 3/32 hex drives E6 - Rotating Male and Female Polarized Jackscrews. For information regarding RIMP TOOLS & RIMPING TOOL TEHNIQUES, see page SERIES
68 P SERIES Size 20 ontacts, Fixed Machined ompliant Press-Fit Three Performance Levels For est ost / Performance Ratio Professional Quality IE & IE UL Recognized Telecommunication File #E49351 UL File #E PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT STNR ENSITY -SUMINITURE -Sub P series connectors are quality connectors with compliant terminations. The low press-in force required to install the contacts into the board eliminates printed board pressure-warp and twisting stresses which can result in expensive repair or replacement of printed boards and back panels. Five standard connector variants are offered in arrangement of 9, 15, 25, 37, and 50 contacts. P connectors are mateable and compatible with all -subminiature connectors conforming to IE , IE , and dimensional requirements of MIL-TL P OMPLINT PRESS- ONNETOR TEHNIL HRTERISTIS MTERILS N FINISHES: Insulator: Glass filled polyester per STM 5927, UL 94V-0, blue color. ontacts: Precision machined copper alloy. ontact Plating: Professional performance - Gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers opper alloy or steel with zinc plate and and rackets: chromate seal or tin plate; stainless steel, passivated. Jackscrew System: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Vibration Lock Systems: Lock tabs, nickel plated steel. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: ontacts Solid Metal Size 20 contact, male inch onstruction: [1.02mm] mating diameter. Female contact - rugged open entry design or Posiand closed entry design, see page 1 for details. ontact Retention In Insulator: 5 lbs. [21 N] minimum. onnector Polarization: Trapezoidal shaped shells and polarized jackscrews. Locking System: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations per IE for open entry 1000 operations per IE for closed entry ELETRIL HRTERISTIS: ontact urrent Rating: Open Entry ontacts: 7.5 amperes nominal losed Entry ontacts, tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum per IE , Test 2a for open entry ohms maximum for closed entry. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.0mm]. Working Voltage: 300 V. ELETRIL HRTERISTIS OF OMPLINT ONNETION TO PLTE-THROUGH-HOLE OF PRINTE OR: Initial ontact Resistance of onnection: Less than ohms per IE , Test 2a. hange in ontact Resistance of onnection after Mechanical, Electrical Less than ohms increase per or limatic onditioning: IE , Test 2a. Gas-tight onnections Test: LIMTI HRTERISTIS: Temperature Range: -55 to Less than ohms increase in contact resistance after 1 hour per EI 364, TP36, Method One. 61
69 -Sub PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT STNR ENSITY -SUMINITURE P SERIES ONTT VRINTS FE VIEW OF MLE ONNETOR OR RER VIEW OF FEMLE ONNETOR P 9 P 15 P P P STNR SHELL SSEMLY 1 K M G 10 E 1 H 0.036±0.008 [0.91±0.20] [5.59] Max [6.73] ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] P 9 M P 9 F P 9 S P 15 M P 15 F P 15 S P 25 M P 25 F P 25 S P 37 M P 37 F P 37 S P 50 M P 50 F P 50 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [54.84] [52.43] [16.92] [25.25] [38.96] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [10.74] [11.20] [15.37] [15.37] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [13.56] [13.56] [5.92] [5.92] [5.84] [5.84] [5.84] [10.82] [10.82] [10.82] 62
70 P SERIES PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT STNR ENSITY -SUMINITURE right angle (90 ) OMPLINT PRESS-FIT TERMINTION OE 62* 1 recommends the practice of using mounting hardware to secure connector to printed circuit board. -Sub [2.84] * 2 ±0.008 [0.20] Typical Part Number: P25S62R [3.71] Nominal P*S62**** [7.19] ONTT EXTENSION PRT NUMER* 1 * 2 P25S62**** P50S62**** NOTE: [52.63] [66.70] [47.04] [61.11] [8.61] [10.03] [7.19] [7.19] * 1 urrently available in 25 and 50 female variants only, contact Technical Sales for availability of other variants. * 2 dimension applies for metal angle brackets only. onsult ccessories -subminiature atalog for dimension when plastic brackets are used [2.84] [2.84] Typical Part Number: P50S62R7000 For right angle (90 ) compliant press-fit contacts, specify code 62 in step 4 of ordering information. SUGGESTE PRINTE OR HOLE SIZES: For right angle (90 ) printed board contact hole pattern, see page 64. STRIGHT OMPLINT PRESS-FIT TERMINTION OE 98 recommends the practice of using mounting hardware to secure connector to printed circuit board [5.72] max. thread length in mounting post Fixed female jackscrews Swage mounting post, 4-40 threads For straight compliant press-fit contacts, specify code 98 in step 4 of ordering information [6.73] Screw, 4-40 threads, **0.167 [4.24] customer supplied 1 Ø0.049 [1.24] Ø0.027 [0.69] contact termination lead-in Typical Part Number: P25F98S0T20 NOTE: * 1 The effective length of the compliant section may also be varied (longer or shorter) and can be selectively positioned and centered at several points along the contact termination length, permitting high or low profile mounting of the connector on printed boards. etail of Omega contacts SUGGESTE PRINTE OR HOLE SIZES: For right angle (90 ) printed board contact hole pattern, see page
71 -Sub PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT STNR ENSITY -SUMINITURE right angle (90 ) and Straight ompliant Press-fit PrINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrow. P SERIES [12.50] Sym. Sym [5.49] [16.66] [2.74] [9.60] [1.37] Sym [23.52] [16.56] [2.77] [1.37] [2.84] [4.11] [2.74] [2.84] [8.23] [1.37] [15.19] P 9 P 15 P 25 Sym. Sym [31.75] [24.84] [30.56] [22.10] [2.77] [2.77] [2.84] [5.69] [1.40] P [23.47] [2.84] [1.40] P [20.70] [2.84] SUGGESTE PRINTE OR HOLE SIZES: Suggest [3.05] Ø hole for connector mounting holes NOTE: For suggested printed board recommended drill hole sizes, plating and finished hole sizes for compliant contact termination positions, see page 81. For compliant press-fit connector installation tools, see page
72 P SERIES PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT STNR ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 -Sub STEP EXMPLE P 25 F 98 S 0 0 X / STEP 1 - asic series P series STEP 2 - onnector Variants 9, 15, 25, 37, 50 STEP 3 - onnector Gender M - Male F - Female - Professional Level open entry contacts S - Female - Industrial Level Posiand closed entry contacts Military plating options available. STEP 4 - ontact Termination Type * Right angle (90 ) printed circuit board mount, compliant press-fit 98 - Straight printed circuit board mount, compliant press-fit STEP 5 - Mounting Style 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Mounting Post 4-40 Threads [6.73] Length. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: P25F98S00X STEP 8 - Shell Options 0 - Zinc plated, with chromate seal. * 3 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). STEP 7 - Locking and Polarizing Systems 0 - None. * 2 V3 - Lock Tab. T6 - Fixed Male and Female Polarized Jackscrews. T2 - Fixed Female Jackscrews, 4-40 Thread. Note: These options must be ordered with connector and cannot be ordered separately. STEP 6 - Hoods 0 - None. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. * 1 vailable in 25 and 50 female variants only, contact Technical Sales for availability of other variants. * 2 V3 locking systems are not available for connector variants 37 and 50. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 3 For stainless steel dimpled male versions contact Technical Sales. 2- rawing 3- Model For information regarding OMPLINT PRESS-FIT INSTLLTION TOOLS, see pages
73 -Sub PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT HIGH ENSITY -SUMINITURE Size 22 ontacts Machined ompliant Press-Fit Three Performance Levels For est ost / Performance Ratio UL & UL Recognized Telecommunication File #E49351 UL File #E P SERIES P series connectors are quality connectors with compliant terminations. The low press-in force required to install the contacts into the board eliminates printed board pressure-warp and twisting stresses which can result in expensive repair or replacement of printed boards and back panels. Six standard connector variants are offered in arrangements of 15, 26, 44, 62, 72, and 104 contacts. P connectors are mateable and compatible with all -subminiature connectors conforming to dimensional requirements of MIL-TL P OMPLINT PRESS- ONNETOR TEHNIL HRTERISTIS MTERILS N FINISHES: Insulator: Glass filled polyester per STM 5927, UL 94V-0, blue color. ontacts: Precision machined copper alloy. ontact Plating: Professional performance - Gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Mounting Spacers opper alloy or steel with zinc plate and and rackets: chromate seal or tin plate; stainless steel, passivated. Jackscrew System: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Vibration Lock Systems: Lock tabs, nickel plated steel. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: ontacts Solid Metal Size 22 contact, male inch onstruction: [0.76 mm] mating diameter. Female contact - rugged open entry design or Posiand closed entry design, see page 1 for details. ontact Retention In Insulator: 5 lbs. [21 N] minimum. onnector Polarization: Trapezoidal shaped shells and polarized jackscrews. Locking System: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations per IE for open entry contacts. 1,000 operations per IE for Posiand closed entry contacts. LIMTI HRTERISTIS: Temperature Range: -55 to ELETRIL HRTERISTIS OF ONNETOR: ontact urrent Rating: Open Entry ontacts: 5 amperes nominal losed Entry ontacts, tested per UL 1977: 12 amperes, 2 contacts energized. 10 amperes, 6 contacts energized. 7.5 amperes, 26 contacts energized. 6.5 amperes, 62 contacts energized. 5.0 amperes, 104 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms maximum per IE , Test 2a for open entry ohms maximum for closed entry. Proof Voltage: 1000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance [minimum]: inch [1.02 mm]. Working Voltage: 300 V. ELETRIL HRTERISTIS OF OMPLINT ONNETION TO PLTE-THROUGH-HOLE OF PRINTE OR: Initial ontact Resistance of onnection: Less than ohms per IE , Test 2a. hange in ontact Resistance of onnection after Mechanical, Electrical or limatic onditioning: Less than ohms increase per IE , Test 2a. Gas-tight onnections Test: Less than ohms increase in contact resistance after 1 hour per EI 364, TP36, Method One. 66
74 PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT HIGH ENSITY -SUMINITURE -Sub ONTT VRINTS FE VIEW OF MLE N RER VIEW OF FEMLE P 15 P 26 P P SERIES P P P STNR SHELL SSEMLY 1 K M G 10 E 1 H 0.036±0.008 [0.91±0.20] [5.59] Max [6.73] ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] G ±0.010 [0.25] H ±0.010 [0.25] K M ±0.010 [0.25] P 15 M P 15 F P 15 S P 26 M P 26 F P 26 S P 44 M P 44 F P 44 S P 62 M P 62 F P 62 S P 78 M P 78 F P 78 S P 104 M P 104 F P 104 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [69.32] [69.32] [16.33] [24.66] [38.38] [54.84] [52.43] [55.60] [16.92] [25.25] [38.96] [55.42] [52.81] [56.18] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [63.50] [63.50] [10.74] [12.32] [11.20] [12.78] [15.37] [15.37] [16.97] [16.97] [19.28] [19.28] [27.51] [27.51] [41.28] [41.28] [57.71] [57.71] [55.32] [55.32] [58.47] [58.47] [13.56] [13.56] [15.14] [15.14] [5.92] [5.92] [5.84] [5.84] [5.84] [5.84] [10.82] [10.82] [10.82] [10.82] 67
75 -Sub PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT HIGH ENSITY -SUMINITURE right angle (90 ) OMPLINT PRESS-FIT TERMINTION OE 62* 1 recommends the practice of using mounting hardware to secure connector to printed circuit board. 78X [3.71] [7.98] [2.54] [2.54] [2.54] P SERIES [10.52] For right angle (90 ) compliant press-fit contacts, specify code 62 in step 4 of ordering information [61.11] Typical Part Number: P78S62R7000 SUGGESTE PRINTE OR HOLE SIZES: For right angle (90 ) printed board contact hole pattern, see page 69. * 2 NOTE: * 1 urrently available in 78 female variants only, contact Technical Sales for availability of other variants. * 2 imension applies for metal angle brackets only. onsult ccessories -subminiature atalog for dimension when plastic brackets are used. STRIGHT OMPLINT PRESS-FIT TERMINTION OE 98 recommends the practice of using mounting hardware to secure connector to printed circuit board [5.72] max. thread length in mounting post Fixed female jackscrews Swage mounting post, 4-40 threads For straight compliant press-fit contacts, specify code 98 in step 4 of ordering information [6.73] Screw, 4-40 threads, customer supplied Ø0.049 [1.24] contact termination Typical Part Number: P44F98S0T20 Ø0.027 [0.69] lead-in * 1 *0.167 [4.24] NOTE: * 1 The effective length of the compliant section may also be varied (longer or shorter) and can be selectively positioned and centered at several points along the contact termination length, permitting high or low profile mounting of the connector on printed boards. etail of Omega contacts SUGGESTE PRINTE OR HOLE SIZES: For right angle (90 ) printed board contact hole pattern, see page
76 PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT HIGH ENSITY -SUMINITURE -Sub P15 MLE right angle (90 ) and Straight ompliant Press-fit PrINTE OR ONTT HOLE PTTERN Mount connector with mating face positioned to follow direction of arrow [24.99] [12.50] [4.83] [24.99] [12.50] [5.46] P15 FEMLE P SERIES [2.29] P26 MLE [33.32] [16.66] [9.65] [2.29] P26 FEMLE [33.32] [16.66] [9.78] [2.29] [2.29] P44 MLE [47.04] [47.04] P44 FEMLE [23.52] [16.51] [23.52] [16.64] [2.29] [2.29] P62 MLE [63.50] [63.50] P62 FEMLE [31.75] [24.71] [31.75] [24.77] P78 MLE [2.41] [61.11] [2.41] [61.11] P78 FEMLE [30.56] [22.94] [30.56] [22.94] P104 MLE [2.41] [63.50] [2.41] [63.50] P104 FEMLE [31.75] [24.92] [31.75] [24.56] [2.41] [2.41] 69 OE NUMER [2.54] [2.54] [2.54] [1.98] [2.08] [3.12] SUGGESTE PRINTE OR HOLE SIZES: Suggest [3.05] Ø hole for connector mounting holes. NOTE: For suggested printed board recommended drill hole sizes, plating and finished hole sizes for compliant contact termination positions, see page 81. For compliant press-fit connector installation tools, see page 80.
77 -Sub PROFESSIONL / INUSTRIL / MILITRY QULITY OMPLINT PRESS-FIT HIGH ENSITY -SUMINITURE ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 8 STEP EXMPLE P 15 M 98 S 0 T2 0 / STEP 1 - asic series P series STEP 2 - onnector Variants 15, 26, 44, 62, 78, 104 STEP 3 - onnector Gender M - Male F - Female - Professional Level open entry contacts S - Female - Industrial Level Posiand closed entry contacts. Military plating options available. STEP 4 - ontact Termination Type * Right angle (90 ) printed circuit board mount, compliant press-fit 98 - Straight printed circuit board mount, compliant press-fit STEP 5 - Mounting Style 3 - racket, Mounting, Right ngle (90 ) Metal with ross ar. R2 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Thread Fixed Female Jackscrews with ross ar. R6 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with [3.05] Ø Mounting Hole with ross ar. R7 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Threads with ross ar. R8 - racket, Mounting, Right ngle (90 ) Metal, Swaged to onnector with 4-40 Locknut with ross ar. S - Swaged Mounting Post 4-40 Threads [6.73] Length. STEP 6 - Hoods 0 - None. STEP 10 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS STEP 9 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: P15M98S0T20 STEP 8 - Shell Options 0 - Zinc plated, with chromate seal. * 3 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). STEP 7 - Locking and Polarizing Systems 0 - None. * 2 V3 - Lock Tab. T6 - Fixed Male and Female Polarized Jackscrews. T2 - Fixed Female Jackscrews, 4-40 Thread. Note: These options must be ordered with connector and cannot be ordered separately. P SERIES NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. * 1 vailable in 78 female variant only, contact Technical Sales for availability of other variants. * 2 V3 locking systems are not available for connector variants 62 and 78. Jackscrews are highly recommended to minimize damage to contacts on variants with high mating forces. * 3 For stainless steel dimpled male versions contact Technical Sales. 2- rawing 3- Model For information regarding OMPLINT PRESS-FIT INSTLLTION TOOLS, see pages
78 STNR ENSITY ONNETOR SVERS / GENER HNGERS -Sub Series Size 20 Open Entry ontact esign H Series Size 20 Posiand losed Entry ontact esign onnector Saver ONNETOR SVERS and H series connectors are suitable for use in any applications requiring high performance characteristic. The normal density and H series are available in five standard connector variants of 9, 15, 25, 37 and 50 contacts. and H series connectors utilize precision machined contacts for strength and durability. series female contact features a rugged open entry design. H series female contact features the Posiand closed entry design for even higher reliability, see page 1 for details. TEHNIL HRTERISTIS and H series connectors can be mated to a connector which would normally experience high numbers of mating cycles. The /H connector can be easily replaced, saving a connector which is not easily replaced. These connectors can also be used as a gender changer. onnectors are available in high density versions, see page MTERILS N FINISHES: Insulator: series: Nylon resin, UL 94V-0, black color. H series: Glass-filled P per STM--5948, UL 94V-0. ontacts: Precision machined copper alloy. ontact Plating: Gold flash over nickel plate. Other finishes available upon request. Shells: Steel with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Fixed ontacts: Size 20 contacts, male inch [1.02 mm] mating diameter. series female contact offers open entry design. H series female contact features Posiand closed entry design, see page 1 for details. onnector Saver: Male to female or male to male. ontact Retention: 9 lbs. [40 N]. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells. Mechanical Operations: series: 500 operations, minimum, per IE H series: 1,000 operations, minimum, per IE ELETRIL HRTERISTIS: ontact urrent Rating: Open Entry ontacts: 7.5 amperes nominal losed Entry ontacts, tested per UL 1977: 18 amperes, 2 contacts energized. 14 amperes, 6 contacts energized. 11 amperes, 15 contacts energized. 10 amperes, 25 contacts energized. 9 amperes, 50 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms, maximum for series ohms, maximum for H series. Proof Voltage: Insulation Resistance: learance and reepage istance: Working Voltage: 1,000 V r.m.s. 5 G ohms inch [1.0 mm], minimum. 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to +125.
79 -Sub STNR ENSITY ONNETOR SVERS / GENER HNGERS N H series Size 20 ontact onnector Saver ONTT VRINTS FE VIEW OF MLE OR USE MIRROR IMGE FOR FEMLE SIZE 9 SIZE 15 SIZE SIZE 37 SIZE Standard Shell ssembly imensions SIZE 20 ONTTS Male ontacts 0.290[7.37] K1 Molding Spacer 0.020[0.51] Maximum Rollover K Female ontacts [3.05] Ø Thru Hole,2 places ONNETOR SVERS E 0.018[0.46] ± [0.91] Typical Part Number: 9F0X9M0X ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] K K1 9 M 9 F 15 M 15 F 25 M 25 F 37 M 37 F 50 M 50 F [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [16.33] [24.66] [38.38] [54.84] [52.43] [16.92] [25.25] [38.96] [55.42] [52.81] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [10.74] [11.20] [15.37] [15.37] [5.92] [5.92] [5.84] [5.84] [5.84] 72
80 STNR ENSITY ONNETOR SVERS / GENER HNGERS -Sub JKSREW SYSTEMS OE E, E6, T N T6 ROTTING MLE N FEMLE JKSREWS E ROTTING MLE N FEMLE POLRIZE JKSREWS FIXE MLE N FEMLE JKSREWS FIXE MLE N FEMLE POLRIZE JKSREWS E6 T T6 4-40UN UN UN UN UN-2 Female contacts 4-40UN-2 Male contacts Female contacts 4-40UN UN-2 Male contacts Female contacts 4-40UN UN-2 Male contacts Female contacts 4-40UN-2 Male contacts 4-40UN UN UN UN UN [19.15] [19.15] [19.15] [19.15] ONNETOR SVERS Example Part Number: 9FEX9M0X Example Part Number: 9FE6X9M0X Example Part Number: 9FTX9M0X MTERIL: rass or steel with zinc plate and chromate seal or clear zinc plate or tin plate; stainless steel, passivated. Example Part Number: 9FT6X9M0X onnectors esigned To ustomer Specifications -subminiature connectors can be modified to customer specifications. Examples: select loading of contacts for cost savings or to gain creepage and clearance distances; longer printed circuit board terminations; customer specified hardware; sealing for water resistance. ontact Technical Sales with your particular requirements. 73
81 -Sub STNR ENSITY ONNETOR SVERS / GENER HNGERS ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 9 STEP EXMPLE F S X 9 M S X / STEP 1 - asic series series - Open entry female contacts, nylon insulator H series - Posiand closed entry female contacts, P insulator. Military plating options available. STEP 2 - onnector Variant 9, 15, 25, 37, 50 STEP 3-1 st onnector Gender M - Male F - Female * 1 STEP 4-1 st connector mating style 0 - Swaged spacer [3.05µ] mounting hole S - Swaged spacer 4-40 UN-2 threads * 3 E - Rotating male and female jackscrews (Select 0 in Step 8) * 3 E6 - Rotating male and female polarized jackscrew (Select 0 in Step 8) * 3 T - Fixed male and female jackscrews (Select 0 in Step 8) * 3 T6 - Fixed male and female polarized jackscrew (Select 0 in Step 8) STEP 5-1 st connector shell option 0 - Zinc plated, with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. STEP 11 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS * 1 STEP 8-2 nd connector mating style 0 - Swaged spacer [3.05µ] mounting hole S - Swaged spacer 4-40 UN-2 threads * 3 E - Rotating male and female jackscrews (Select 0 in Step 4) * 3 E6 - Rotating male and female polarized jackscrew (Select 0 in Step 4) * 3 T - Fixed male and female jackscrews (Select 0 in Step 4) * 3 T6 - Fixed male and female polarized jackscrew (Select 0 in Step 4) * 2 STEP 6-2 nd onnector Variant 9, 15, 25, 37, 50 STEP 10 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: 9FSX9MSX STEP 9-2 nd connector shell option 0 - Zinc plated, with chromate seal. * 4 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). STEP 7-2 nd onnector Gender M - Male ONNETOR SVERS * 1 onnector mating style for both connectors must be the same if 0 or S is used. If E, E6, T or T6 is used in either Step 4 or 8 the other step must be 0. * 2 onnector variant for both connectors must be the same. * 3 For hardware information, see page 73. * 4 For stainless steel dimpled male versions contact Technical Sales. 2- rawing 3- Model 74
82 HIGH ENSITY ONNETOR SVERS / GENER HNGERS -Sub Series Size 22 Open Entry or Posiand losed Entry ontact esign onnector Saver ONNETOR SVERS 75 series connectors are suitable for use in any applications requiring high performance characteristic. The high density series is available in six standard connector variants of 15, 26, 44, 62, 78 and 104 contacts. series connectors utilize precision machined contacts for strength and durability. The female contact features a rugged open entry design. Female Posiand closed entry contacts can be chosen for even higher reliability, see page 1 for details. MTERILS N FINISHES: Insulator: Polyester glass-filled per STM 5927, UL 94V-0. ontacts: Precision machined copper alloy. ontact Plating: Gold flash over nickel plate. Other finishes available upon request. Shells: Steel or brass with tin plate; zinc plate with chromate seal, stainless steel passivated. Other materials and finishes available upon request. Low magnetic versions are available, contact Technical Sales. MEHNIL HRTERISTIS: Fixed ontacts: Size 22 contacts - male inch [0.76 mm] mating diameter. Female contact: open entry or Posiand closed entry design, see page 1 for details. onnector Saver: Male to female. ontact Retention: 9 lbs. [40 N]. Shells: Male shells may be dimpled for EMI/ES ground paths. Polarization: Trapezoidally shaped shells. TEHNIL HRTERISTIS series connectors can be mated to a connector which would normally experience high numbers of mating cycles. The connector can be easily replaced, saving a connector which is not easily replaced. onnectors are available in standard density versions, see page 71. Mechanical Operations: 500 operations, minimum, per IE for open entry operations, minimum, per IE for closed entry. ELETRIL HRTERISTIS: ontact urrent Rating: Open Entry ontacts: 5 amperes nominal losed Entry ontacts, tested per UL 1977: 12 amperes, 2 contacts energized. 10 amperes, 6 contacts energized. 7.5 amperes, 26 contacts energized. 6.5 amperes, 62 contacts energized. 5.0 amperes, 104 contacts energized. See temperature rise curves on page 2 for details. Initial ontact Resistance: ohms, maximum for open entry ohms, maximum for closed entry Proof Voltage: 1,000 V r.m.s. Insulation Resistance: 5 G ohms. learance and reepage istance: inch [1.06 mm], minimum. Working Voltage: 300 V r.m.s. LIMTI HRTERISTIS: Temperature Range: -55 to +125.
83 -Sub HIGH ENSITY ONNETOR SVERS / GENER HNGERS a series Size 22 ontact onnector Saver ONTT VRINTS FE VIEW OF MLE OR USE MIRROR IMGE FOR FEMLE Typical Part Number: 15M0X15F0X 1 Standard Shell ssembly imensions E [3.05] Ø Thru Hole, 2 places SIZE 22 ONTTS Male ontacts 0.290[7.37] K1 Molding Spacer 0.018[0.46] ± [0.91] K Female ontacts 0.020[0.51] Maximum Rollover ONNETOR SVERS ONNETOR VRINT SIZES ±0.015 [0.38] 1 1 E ±0.015 [0.38] K K1 15 M 15 F 15 S 26 M 26 F 26 S 44 M 44 F 44 S 62 M 62 F 62 S 78 M 78 F 78 S 104 M 104 F 104 S [30.81] [30.81] [39.14] [39.14] [53.04] [53.04] [69.32] [69.32] [66.93] [66.93] [69.32] [69.32] [16.33] [24.66] [38.38] [54.84] [52.43] [55.60] [16.92] [25.25] [38.96] [55.42] [52.81] [56.18] [24.99] [24.99] [33.32] [33.32] [47.04] [47.04] [63.50] [63.50] [61.11] [61.11] [63.50] [63.50] [10.74] [12.32] [11.20] [12.78] [15.37] [15.37] [16.97] [16.97] [5.92] [5.92] [5.84] [5.84] [5.84] [5.84] 76
84 HIGH ENSITY ONNETOR SVERS / GENER HNGERS -Sub ORERING INFORMTION - OE NUMERING SYSTEM Specify omplete onnector y Selecting n Option From Step 1 Through 9 STEP EXMPLE M S X 15 F S X / STEP 1 - asic series series STEP 2 - onnector Variant 15, 26, 44, 62, 78, 104 STEP 11 - SPEIL OPTIONS [0.76µ] gold over nickel [1.27µ] gold over nickel. ONTT TEHNIL SLES FOR SPEIL OPTIONS ONNETOR SVERS STEP 3-1 st onnector Gender M - Male * 2 STEP 4-1 st connector mating style 0 - Swaged spacer [3.05µ] mounting hole S - Swaged spacer 4-40 UN-2 threads * 3 E - Rotating male and female jackscrews (Select 0 in Step 8) * 3 E6 - Rotating male and female polarized jackscrew (Select 0 in Step 8) * 3 T - Fixed male and female jackscrews (Select 0 in Step 8) * 3 T6 - Fixed male and female polarized jackscrew (Select 0 in Step 8) STEP 5-1 st connector shell option 0 - Zinc plated, with chromate seal. * 5 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). * 1 Male option available only on connector variant 78. * 2 onnector mating style for both connectors must be the same if 0 or S is used. If E, E6, T or T6 is used in either Step 4 or 8 the other step must be 0. * 3 For hardware information, see page 73. * 4 onnector variant for both connectors must be the same as in Step 2. * 5 For stainless steel dimpled male versions contact Technical Sales. NOTE: Once you have made a connector selection, contact Technical Sales if you would like to receive a drawing in XF, PF format or a 3-dimensional IGES, STEP, or SOLIWORKS file. **STEP 8-2 nd connector mating style 0 - Swaged spacer [3.05µ] mounting hole S - Swaged spacer 4-40 UN-2 threads * 3 E - Rotating male and female jackscrews (Select 0 in Step 4) * 3 E6 - Rotating male and female polarized jackscrew (Select 0 in Step 4) * 3 T - Fixed male and female jackscrews (Select 0 in Step 4) * 3 T6 - Fixed male and female polarized jackscrew (Select 0 in Step 4) * 4 STEP 6-2 nd onnector Variant 15, 26, 44, 62, 78, 104 STEP 10 - Environmental ompliance options / - RoHS ompliant Note: If compliance to environmental legislation is not required, this step will not be used. Example: 15MSX15FSX STEP 9-2 nd connector shell option 0 - Zinc plated, with chromate seal. * 5 S - Stainless steel, passivated. X - Tin plated. Z - Tin plated and dimpled (male connectors only). STEP 7-2 nd onnector Gender * 1 M - Male F - Female - Professional Level - open entry contacts S - Female - Industrial Level - Posiand closed entry contacts Military plating options available. 2- rawing 3- Model 77
85 -Sub PPLITION TOOLS P P L I T I O N T O O L S S E T I O N S / R / OR / O / connectors are offered with removable crimp contacts. recognizes the importance of supplying application tooling to support our customers use of our products. Information on application tooling is available on our web site at There you will find downloadable PF cross reference charts for removable and compliant press-fit contacts. These charts will supply part numbers for insertion, removal and crimping tools, along with information regarding use of tools and techniques. REELS FOR UTOMTI PNEUMTI RIMP TOOLS Enlarged section of plastic contact carriers ontacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic pneumatic crimp tools, catalog part number The same type carrier is used for both male and female contacts. ll male and female crimp contacts can be ordered in reels by adding letter R after the contact part number, such as M6020R for a male contact and F60202R for female contact. PPLITION TOOLS 78
86 PPLITION TOOLS -Sub ONTT PPLITION TOOLS ROSS REFERENE LIST USE INITE POSITRONI TOOLS FOR EST RESULTS PPLITION TOOLS * 1 ll male and female crimp contacts can be ordered on reels in quantities of 2,000 by adding letter R after the contact part number, see page 78 for more information. SERIES O SERIES OR SERIES R SERIES S SERIES M FM8 M22520/ K694 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K694 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 F FM8 M22520/ K694 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K694 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 M FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 M39029/ FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/1-02 F FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 M39029/ FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/1-02 M602*** thermocouple FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F602*2** thermocouple FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 M FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F FM8 M22520/ K774 M81969/ M81969/1-02 M81969/ M81969/1-02 M602*** thermocouple FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ F602*2** thermocouple FM8 M22520/ K13-1 M22520/2-08 M81969/ M81969/1-02 M81969/ M81969/ M FM8 M22520/ K-42 M22520/2-09 M81969/ M81969/1-04 M81969/ M81969/ M FM8 M22520/ K1665 M81969/ M81969/1-04 M81969/ M81969/1-04 MS8122 M81969/ M81969/1-04 M81969/ M81969/1-04 F FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/ F FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/ F FM8 M22520/ K1665 M81969/ M81969/1-04 M81969/ M81969/1-04 FS80222 M81969/ M81969/1-04 M81969/ M81969/1-04 FS8122 M81969/ M81969/1-04 M81969/ M81969/1-04 M8022** thermocouple FM8 M22520/ K-42 M22520/2-09 M81969/ M81969/1-04 M81969/ M81969/ F80222** thermocouple FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/ M FM8 M22520/ K-42 M22520/2-09 M81969/ M81969/1-04 M81969/ M81969/ M FM8 M22520/ K1665 M81969/ M81969/1-04 M81969/ M81969/1-04 MS8022 M81969/ M81969/1-04 M81969/ M81969/1-04 M39029/ FM8 M22520/ K-42 M22520/2-09 M81969/ M81969/1-04 M81969/ M81969/1-04 F FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/ F FM8 M22520/ K1665 FS80222 M81969/ M81969/1-04 M81969/ M81969/1-04 M39029/ FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/1-04 M8022** thermocouple FM8 M22520/ K-42 M22520/2-09 M81969/ M81969/1-04 M81969/ M81969/ F80222** thermocouple FM8 M22520/ K-41 M22520/2-06 M81969/ M81969/1-04 M81969/ M81969/ ontact P/N Handle & Positioner P/N Hand rimp Tool P/N Mfg. ross Mil Equiv Positioner Mfg. ross Mil Equiv Insertion Tool Mfg. ross Mil Equiv Removal Tool Mfg. ross Mil Equiv utomatic rimp Tool * 1 See Note 79
87 -Sub PPLITION TOOLS OMPLINT PRESS-FIT ONNETORS INSTLLTION TOOLS USE INITE POSITRONI TOOLS FOR EST RESULTS POSITRONI REOMMENE TOOLS FOR P SERIES N P SERIES ONNETORS N ONTTS series Male onnector Seating Female P P P P P P P P PPLITION TOOLS P P P rbor press for connector seating tools ton capacity 4 inch throat P series - Replacement pins for connector seating tools. Female P series - Replacement pins for connector seating tools. Female
88 PPLITION TOOLS -Sub SUGGESTE PRINTE OR HOLE SIZES FOR OMPLINT PRESS-FIT TERMINTION Traditionally, tin-lead has been a popular plating for printed circuit board (P) holes. However, many P hole platings must now be RoHS compliant. is pleased to offer P hole size for RoHS P plating as shown below. Omega ompliant Press-Fit ontact Hole Omega Termination OR TYPE ONTT SIZE / TYPE REOMMENE RILL HOLE SIZE REOMMENE PLTING FINISHE HOLE SIZES TIN-LE SOLER P 22 OMEG 20 OMEG ø0.0453± [ø1.150±0.025] ø0.0453± [ø1.150±0.025] [15µ] minimum solder over [25µ] min. copper ø [ø ] ø [ø ] RoHS P PLTING OPTIONS OMPLINT PRESS-FIT TERMINTION ONTT HOLE 22 OMEG ø0.047±0.001 [ø1.19±0.025] ø0.043±0.002 [ø1.09±0.05] Note: For P plating compositions not shown, consult Technical Sales. OPPER P 20 OMEG ø0.047±0.001 [ø1.19±0.025] [25µ] min. copper ø0.043±0.002 [ø1.09±0.05] ompliant press-fit user information PPLITION TOOLS 81 IMMERSION TIN P IMMERSION SILVER P ELETROLESS NIKEL / IMMERSION GOL P 22 OMEG 20 OMEG 22 OMEG 20 OMEG 22 OMEG 20 OMEG ø0.047±0.001 [ø1.19±0.025] ± [0.85±0.15µ] immersion tin ø0.047±0.001 [ø1.19±0.025] over [25µ] min. copper ø0.047±0.001 [ø1.19±0.025] ± [0.34±0.17µ] immersion silver ø0.047±0.001 [ø1.19±0.025] ø0.047±0.001 [ø1.19±0.025] ø0.047±0.001 [ø1.19±0.025] over [25µ] min. copper [0.05µ] min. immersion gold over ± [4.5±1.5µ] electroless nickel per IP-4552 over [25µ] min. copper ø0.043±0.002 [ø1.09±0.05] ø0.043±0.002 [ø1.09±0.05] ø0.043±0.002 [ø1.09±0.05] ø0.043±0.002 [ø1.09±0.05] ø0.043±0.002 [ø1.09±0.05] ø0.043±0.002 [ø1.09±0.05] When properly used, Omega signal compliant press-fit terminations provide reliable service even under severe conditions. onnectors utilizing this leading technology compliant press-fit contact are easy to install: 1. Inexpensive installation tooling is available from, to choose the proper installation tool refer to page 83 for part number ordering information. 2. Insert the connector into the printed circuit board or back plane and seat connector fully. 3. Secure the connector to the printed circuit board or back plane using two self-tapping screws. The screws should be 4-40 threads supplied by customer.
89 offers a variety of QPL connector products -SUMINITURE ONNETORS MIL PREFIX POSITRONI SERIES MIL PREFIX POSITRONI SERIES MIL-TL-24308/1 H MIL-TL-24308/24 H, MIL-TL-24308/2 R, MIL-TL-24308/25 H, R, MIL-TL-24308/3 H MIL-TL-24308/26 H, R, MIL-TL-24308/4 R, GSF S-311-P4 SN, S, S, SM MIL-TL-24308/5 H GSF S-311-P10 SN, SM MIL-TL-24308/6 R, SE S39029/57 MIL-TL-24308/7 H SE S39029/58 MIL-TL-24308/8 R, SE S39029/63 R MIL-TL-24308/23 H, SE S39029/64 R RETNGULR ONNETORS MIL PREFIX POSITRONI SERIES MIL PREFIX POSITRONI SERIES MIL-TL-28748/3 GMT MIL-TL-28748/8 SGM MIL-TL-28748/4 GMT MIL /13 SGM MIL-TL-28748/5 GM MIL /14 SGM MIL-TL-28748/6 GM SE S39029/34 SGM, GMT MIL-TL-28748/7 SGM SE S39029/35 SGM, GMT For a complete QPL listing available to download in PF format, visit the desired connector family home page and click on link Qualified Product Listing (PF) on our website at: www. or enter the URL link below to download the QPL PF file QPL LISTING 82
90 Other -subminiature Products offers full line of -subminiature connectors in a wide variety of contact variants and package sizes with compliant press-fit, solder and cable terminations. ll connector products provide quality, reliability, and flexibility. HIGH PERFORMNE -SUMINITURE ONNETORS Standard and high density connectors manufactured to MIL-PRF-24308, lass M; Goddard Space Flight enter S-311-P-4 and Goddard Space Flight enter S-311-P-10. ENVIRONMENTL- ONNETORS Standard and high density connectors with environmental protection features to IP67. Straight and right angle (90 ), and cable terminations available. OMO- ONNETORS onnectors with signal, shielded, power, thermocouple or high voltage contacts in a single package. Power compliant press-fit terminations now available. UL PORT ONNETORS Right angle (90 ) p.c. board mount connectors assembled stacked to maximize real estate; contact variants 9 through 62; available in standard density, high density, and mixed density. 83
91 HIGH RELIILITY Products P O W E R FETURES: High current density Energy saving - low contact resistance Hot swap capability / operation in a single connector Signal contacts for hardware management lind mating Sequential mating Large surface area contact mating system Wide variety of accessories ustomer-specifi ed contact arrangements Modular tooling which produces a single piece connector insert ontact Sizes: 0, 8, 12, 16, 20, 22 and 24 urrent Ratings: To 200 amperes per contact Terminations: rimp and fi xed cable connector, straight solder, right angle (90 ) solder, straight compliant press-in and right angle (90 ) compliant press-in onfigurations: Multiple variants in a variety of package sizes ompliance: PIMG 2.11, PIMG 3.0, VIT 41, S, GSF S-311-P-4, GSF S-311-P-10 R E T N G U L R FETURES: Two performance levels available: industrial quality and military quality wide variety of accessories road selection of contact arrangement and package sizes onnector coding device (keying) options ontact Sizes: 16, 20 and 22 urrent Ratings: To 13 amperes nominal Terminations: rimp, wire solder, straight solder, right angle (90 ) solder, and straight compliant press-in onfigurations: Multiple variants in both standard and high densities, thirty package sizes Qualifications: MIL-TL-28748, SE S39029, ITT V.35 esign assemblies in accordance with customer specifi cations. Prepare wire harness connector confi guration and performance specifi cations. esign each system in accordance with applicable customer, domestic, and international standards. L E FETURES: efi ne and conduct performance and verifi cation testing. Shorten the supply chain and reduce additional costs and delays by cablizing your connector selection Overmolding available Shielded and environmentally sealed versions available Power cables and access boxes which meet the SE J2496 specifi cation - S U M I N I T U R E ontact Sizes: 8, 16, 20 and 22 urrent Ratings: To 100 amperes FETURES: Four performance levels available for best cost/performance ratio: professional, industrial, military and space-fl ight quality Options include high voltage, coax, thermocouple and air coupling contacts; environmentally sealed and dual port connector packages including mixed density road selection of accessories Size 20 and 22 contacts suitable for use in carrying power IP65, IP67 Terminations: rimp, wire solder, straight solder, right angle (90 ) solder, straight compliant press-in and right angle (90 ) compliant press-in onfigurations: Multiple variants in both standard and high densities, seven connector housing sizes Qualifications: MIL-TL-24308, GSF S-311-P-4, GSF S-311-P-10, SE S39029, S I R U L R FETURES: Non-corrodible / lightweight composite construction EMI/RFI shielded versions Thermocouple contacts Environmentally sealed versions Rear insertion/ front release of removable contacts Two level sequential mating Overmolding available on full assemblies ontact Sizes: 12, 16, 20 and 22 urrent Ratings: To 25 amperes nominal Terminations: rimp, wire solder, straight solder, and right angle (90 ) solder onfigurations: Multiple variants in four package sizes Qualifications: Environmental protection to IP67 H E R M E T I FETURES: Intended for use as an electrical feedthrough in high vacuum applications Helium leakage rate at ambient temperature: < 5x10-9 mbar.l/s under a vacuum 1.5x10-2 mbar Signal, power, coax and high voltage versions available onnectors can be mounted on fl ange assembly per customer specifi cation ontact Sizes: 8, 12, 16, 20 and 22 urrent Ratings: To 40 amperes nominal Terminations: Feedthrough is standard; fl ying leads and board mount available upon request onfigurations: See -subminiature and circular confi gurations above ompliance: Space-32 For more information, visit www. or call your nearest sales offi ce listed on the back of this catalog.
92 Regional Headquarters mericas 423 N ampbell ve Springfield MO US info@ Europe Z.I. d Engachies 46, route d Engachies F uch edex 9 France contact@ sia 3014 Ubi R 1 # Singapore singapore@ Sales Offices has local sales representation all over the world. To find the nearest sales office, please visit
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationCatalog C-007 Rev. B
atalog -007 Rev. POSITRONI INUSTRIES bout Us Founded in 1966, is a vertically integrated manufacturer of high quality interconnect products. Positronic has earned the worldwide reputation as a service
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationCatalog C-013 Rev. D
Catalog C-013 Rev. D Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG and VITA. Introduction of new and unique
More informationD-SUB SERIES. Lightweight backshells 3401/072 MATERIALS AND FINISHES. Features and Benefits. Typical Applications. Specification.
-SU SERIES Lightweight backshells 3401/072 Features and enefits ompliant with ES specifications 3401/072 Ultra-light weight Solid fully machined aluminium alloy material Non magnetic EMI pplication Typical
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationSGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationPCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for
More informationCatalog C-015 Rev. E
Catalog C-015 Rev. E Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG and VITA. Introduction of new and unique
More informationGecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 96 contacts are available for
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationIMPACT Backplane Connector System
IMPT ackplane onnector System isclaimer While T has made every reasonable effort to ensure the accuracy of the information in this catalog, T does not guarantee that it is error-free, nor does T make any
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationMicro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationRack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts
Rack & Panel Rectangular Miniature Subminiature Environmental Removable ontacts Table Of ontents Series Description Page MR Miniature Rectangular onnectors With Removable ontacts 2-10 X External Miniature
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationM Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationKA Series. MIL-DTL Compliant PCB connectors
MIL-DTL-55302 Compliant connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
More informationCobra. Mighty Mouse TECHNICAL SPECIFICATIONS
Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationR-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationThe Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationJFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Disconnectable rimp style (Wire-to-wire connectors) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. 2, 3 or s for
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationAmphenol EP-QUAD-10G Quad 10G Base-T to XAUI Converter
1 mphenol EP-QU-10G Quad 10G ase-t to XUI onverter mphenol erospace adds 10G ase-t to XUI onverter to the Electronics Product Family. This product line is rugged, flexible, and affordable with many options
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationmicro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999
micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications
More informationWirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)
REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction
More informationD*MA Standard Density Crimp Contact Cable Connector
annon rimp, Size 20 *M Standard ensity rimp ontact able onnector or contact cavity arrangements, see pages -44. or panel cutouts, see page -49. ngaging ace Shell Size ayout ual Through Hole loat Mount
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationR-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes ecember 2015 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
More informationCONNECTION CONNECTION. Free Call:
ONNETION Amphenol AT Series Bulk Packs Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 33 Amphenol AT Series omplete Sets Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 34 Amphenol Pin ontacts,
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationCard Edge Connectors Catalog Issued 7-03
Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationCONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
More informationMODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
More informationWEATHER-PACK. Special Products. Cross Sectional View WEATHER-PACK FEMALE TERMINALS (SLEEVE) SEALED* WEATHER-PACK CABLE SEALS
pecial Products ELE E L E WETHER-PK ross ectional View leeve Pin Hinged TP Hinged TP able onnector eal able eal able able eal Female onnector ssembly Male onnector able eal WETHER-PK FEMLE TERMINL (LEEVE)
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationJFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Wire-to-wire connectors (For Interface) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. pplicable contact and tooling
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationHBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com
HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More informationAmphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More information