IMPACT Backplane Connector System
|
|
- Aubrey Newton
- 6 years ago
- Views:
Transcription
1 IMPT ackplane onnector System
2 isclaimer While T has made every reasonable effort to ensure the accuracy of the information in this catalog, T does not guarantee that it is error-free, nor does T make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. T reserves the right to make any adjustments to the information contained herein at any time without notice. T expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. onsult T for the latest dimensions and design specifications. opyright 2011 Tyco lectronics orporation. ll s Reserved. MULTIGIG RT, -PK, -PK HM-d, -PK HS3, -PK Slim UH, -PK TinMan, T onnectivity, T connectivity (logo) and T (logo) are trademarks of the T onnectivity Ltd family of companies. IMPT is a trademark of Molex, Inc. Other logos, product and ompany names mentioned herein may be trademarks of their respective owners. 2 IMPT ackplane onnector System Table of ontents Introduction aughter ard Receptacle ssemblies 6 Pair aughter ard Receptacle ssemblies Pair aughter ard Receptacle ssemblies Pair aughter ard Receptacle ssemblies Pair aughter ard Receptacle ssemblies Pair aughter ard Receptacle ssemblies Mezzanine ssemblies 5 Pair Mezzanine ssemblies ackplane Header ssemblies 6 Pair ackplane Header ssemblies Pair ackplane Header ssemblies Pair ackplane Header ssemblies Pair ackplane Header ssemblies Pair ackplane Header ssemblies oplanar Header (RM) ssemblies 2 Pair oplanar Header (RM) ssemblies Orthogonal Receptacle ssemblies 6 Pair Orthogonal Receptacle ssemblies Pair Orthogonal Receptacle ssemblies Pair Orthogonal Receptacle ssemblies Pair Orthogonal Receptacle ssemblies Orthogonal Header ssemblies 6 Pair Orthogonal Header ssemblies Pair Orthogonal Header ssemblies Pair Orthogonal Header ssemblies Pair Orthogonal Header ssemblies Part Number Index Global ontacts Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
3 IMPT ackplane onnector System Introduction Product acts ifferential pair density up to 80 pairs per linear inch road-edge-coupled, differential-pair system P routing complexity and costs are reduced by using 1.90 mm by 1.35 mm (.075" by.053") grid on backplane and daughter card Offers flexibility and advanced mechanical and electrical performance with two compliant-pin attach options Inline staggered, bifurcated contact beams in daughter card interface provides improved mating performance Industry pplications Telecommunications equipment Hubs, routers, switches entral office, cellular infrastructure and multi-platform service (SL, able ata) systems ata networking equipment Servers Storage Test and measurement equipment Medical diagnostic equipment Technical ocuments Product Specification pplication Specification T onnectivity offers a variety of backplane/ midplane solutions to meet the demand for increased network bandwidth and advanced technology. ach solution is designed for high performance, increased density and compatibility with industrystandard interfaces. T provides a user-friendly transition between the Pmounted connector and the backplane/ midplane. T has extensive knowledge and expertise on high-speed interface design. Your specific needs can be customized and transformed into new manufacturable designs. The IMPT backplane connector and cable system from T pushes the speed and density envelope to meet the growing demands of next-generation telecommunication and data networking equipment; the system is available in 2-6 pair configurations with a complete range of guidance and power-solution options plus right-angle cable assemblies. The IMPT system is available in two compliantpin design options on both daughter card and backplane connectors, providing customers ultimate flexibility to optimize their designs for advanced mechanical and electrical performance. The IMPT system s mating interface provides in-line staggered, bifurcated contacts that provide 2 points of contact for the long-term reliability performance and built-in, ground-signal sequencing. This reduces the average mating force per connector to improve the mechanical mating performance of the system. Material and inish Signal ontact High Performance opper (u) lloy Ground ontact High Performance opper (u) lloy Housing Liquid rystal Polymer, UL 94V-0 Platings ontact rea 0.76 µm (30 µ") Gold (u) min. Solder Tail rea Tin (Sn) or Tin/Lead (Sn/Pb) Underplating Nickel (Ni) P Thickness 1.60 mm (.062") typical Ratings Temperature Range -55 to 85 max. urrent Rating 0.75 per pin max. urability 200 cycles Operating Voltage 30 V RMS/ max. Mating orce 0.30 N (9.066 lb) max. per pin ompliant Pin Retention orce to P 3.56 N (.80 lb) per compliant pin average min. ompliant Pin Insertion orce to P 26.7 N (6.0 lb) max. per contact Signal Integrity Insulation Resistance 10,000 Megohms min. Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
4 IMPT ackplane onnector System Introduction (ontinued) ata Rate 3-6 Gb/s 6-10 Gb/s Gb/s Gb/s Gb/s 25+ Gb/s IMPT onnector 40 P/in 16 P/cm -PK TinMan 100Ω and 85Ω onnectors 40 P/in 16 P/cm -PK Slim UH S onnector 36 P/in 14 P/cm -PK Slim UH HS onnector 70 P/in 26 P/cm -PK HM-d onnector 40 P/in 16 P/cm -PK HM-d Plus onnector 40 P/in 16 P/cm MULTIGIG RT onnector 57 P/in 23 P/cm -PK HS3 onnector 60 P/in 24 P/cm Header Width (W) Pairs/Inch 2 Pair IMPT onnector mm 27 3 Pair IMPT onnector mm 40 4 Pair IMPT onnector mm 54 5 Pair IMPT onnector 24.8 mm 67 6 Pair IMPT onnector mm 80 ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P plated thru holes by contacting the respective country product information center listed on the bottom of each page. Receptacles Headers 2 Pair Pair Pair Pair Pair W 6 Pair 5 Pair 4 Pair 3 Pair 4 2 Pair Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
5 IMPT ackplane onnector System Introduction (ontinued) IMPT onnector amily Standard, Monoblock Solutions 2 Pair IMPT (W = mm) ensity = 27 Pairs/Inch 10 column = 20 iff. Pairs 16 column = 32 iff. Pairs 3 Pair IMPT (W = 16.7 mm) ensity = 40 Pairs/Inch 10 column = 30 iff. Pairs 16 column = 48 iff. Pairs nd-to-nd Stackable xample 4 Pair IMPT (W = mm) ensity = 54 Pairs/Inch 10 column = 40 iff. Pairs 16 column = 64 iff. Pairs 5 Pair IMPT (W = mm) ensity = 67 Pairs/Inch 10 column = 50 iff. Pairs 16 column = 80 iff. Pairs 6 Pair IMPT (W = mm) ensity = 80 Pairs/Inch 10 column = 60 iff. Pairs 16 column = 96 iff. Pairs nd Wall Separation xample Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
6 IMPT ackplane onnector System Introduction (ontinued) Worst ase rosstalk ll NXT 2.7% ll ext 0.7% Recommended Pinout 1.5% (as shown below) Test ata Vertical Header -ngle Receptacle 4 pair connector module 1.9 mm column pitch " plated through holes 50 ps (20-80%) edge rate Includes two 1.5 mm [0.060] vias to bottom layer traces synchronous noise sum of peaks from each aggressor, divided by differential swing (-) Magnitude (d) ifferential Insertion Loss requency (GHz) ifferential Impedance Impedance (Ohms) Time (ns) 6 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
7 IMPT ackplane onnector System Introduction (ontinued) IMPT High Performance able ssembly Planned: 3 x 16 wafer stack 96 diff. pair total IMPT wafer to wafer pitch 3.8 mm ssumes 3 m length 26 WG raw cable Integral guidance Robust, stamped, metal wafer stack stiffener 100 Ohm Pair Size olumns Pins Pairs 2 Pair Pair Pair Pair Pair Ohm Pair Size olumns Pins Pairs Pair Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
8 IMPT ackplane onnector System aughter ard Receptacle ssemblies 6 Pair aughter ard Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Key Position hart None G H Recommended P Layout Min. oard Thickness Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
9 IMPT ackplane onnector System aughter ard Receptacle ssemblies (ontinued) 5 Pair aughter ard Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Key Position hart None G H Recommended P Layout Min. oard Thickness 1.0 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
10 IMPT ackplane onnector System aughter ard Receptacle ssemblies (ontinued) 4 Pair aughter ard Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Key Position hart None G H Recommended P Layout Min. oard Thickness Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
11 IMPT ackplane onnector System aughter ard Receptacle ssemblies (ontinued) 3 Pair aughter ard Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Key Position hart None G H Recommended P Layout Min. oard Thickness 1.0 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
12 IMPT ackplane onnector System aughter ard Receptacle ssemblies (ontinued) 2 Pair aughter ard Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 16 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Recommended P Layout Min. oard Thickness Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
13 IMPT ackplane onnector System Mezzanine ssemblies 5 Pair Mezzanine Receptacle ssemblies Stack olumn Height Guide Part Number pplication Tooling Mates With mm mm Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Recommended P Layout Min. oard Thickness 1.0 Max. Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
14 IMPT ackplane onnector System ackplane Header ssemblies 6 Pair ackplane Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Guided ackplane Hole Pattern (onnector Side) Key Position hart None G H Section - 14 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
15 IMPT ackplane onnector System ackplane Header ssemblies (ontinued) 5 Pair ackplane Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Guided ackplane Hole Pattern (onnector Side) Section - Key Position hart None G H Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
16 IMPT ackplane onnector System ackplane Header ssemblies (ontinued) 4 Pair ackplane Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Guided ackplane Hole Pattern (onnector Side) Key Position hart None G H Section - 16 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
17 IMPT ackplane onnector System ackplane Header ssemblies (ontinued) 3 Pair ackplane Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P ackplane Hole Pattern (onnector Side) Section - Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
18 IMPT ackplane onnector System ackplane Header ssemblies (ontinued) 2 Pair ackplane Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Guided ackplane Hole Pattern (onnector Side) Section - 18 Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
19 IMPT ackplane onnector System oplanar Header (RM) ssemblies (ontinued) 2 Pair oplanar Header (RM) ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 16 column part number is pictured below. Max. Recommended P Layout oplanar Mated Signal Paths Visit the IMPT connector webpage at: Guided ngle Male Mates To Guided ngle Receptacle Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
20 IMPT ackplane onnector System Orthogonal Receptacle ssemblies 6 Pair Orthogonal Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 12 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Recommended P Layout Min. oard Thickness Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
21 IMPT ackplane onnector System Orthogonal Receptacle ssemblies (ontinued) 5 Pair Orthogonal Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Max. Recommended P Layout Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
22 IMPT ackplane onnector System Orthogonal Receptacle ssemblies (ontinued) 4 Pair Orthogonal Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 8 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Ref. Max. Recommended P Layout Min. oard Thickness Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
23 IMPT ackplane onnector System Orthogonal Receptacle ssemblies (ontinued) 3 Pair Orthogonal Receptacle ssemblies olumn Guide Part Number pplication Tooling Mates With Note: 6 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Max. Recommended P Layout Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
24 IMPT ackplane onnector System Orthogonal Header ssemblies 6 Pair Orthogonal Header ssemblies ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P plated thru holes by contacting the respective country product information center listed on the bottom of each page. olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 12 column part number is pictured below. Guided ackplane Hole Pattern (onnector Side) 24 Section - Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
25 IMPT ackplane onnector System Orthogonal Header ssemblies (ontinued) 5 Pair Orthogonal Header ssemblies Note: 10 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P plated thru holes by contacting the respective country product information center listed on the bottom of each page. olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Open Open ual Open Visit the IMPT connector webpage at: Guided ackplane Hole Pattern (onnector Side) Section - Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
26 IMPT ackplane onnector System Orthogonal Header ssemblies (ontinued) 4 Pair Orthogonal Header ssemblies Note: 8 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P plated thru holes by contacting the respective country product information center listed on the bottom of each page. olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Open Open ual Open Guided ackplane Hole Pattern (onnector Side) 26 Section - Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
27 IMPT ackplane onnector System Orthogonal Header ssemblies (ontinued) 3 Pair Orthogonal Header ssemblies olumn Guide Wall nd Part Number pplication Mates With Tooling Open Open ual Open Open Open ual Open Note: 8 column part number is pictured below. ll the numbers provided are for 0.39mm P plated thru hole use. Part numbers are available for 0.46mm P Guided ackplane Hole Pattern (onnector Side) Section - Visit the IMPT connector webpage at: Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
28 IMPT ackplane onnector System Part Number Index 28 Note: This index lists all cataloged parts by base no. only. omplete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. Page , , , 11, , , , , , , 10, , , , , , , 8, , , , , , , , , , , , , , , , , , , , 15 Part No. Page , , , , , , , , , , 18, , 18, , 12, 18, , 18, , 18, , 18, , , , , , , , , , 9, , , , , , , , , 27 Part No. Page , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 24 Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
29 IMPT ackplane onnector System Part Number Index (ontinued) Part No. Page , , , , , , , , 24 Part No. Page , , , , , , 25 Part No. Page , , , , Tooling Part Number Index Part No. Page Part No. Page Part No. Page , , , , Revised 4-11 reference purposes only. unless otherwise specified. Mexico/. m.: +52 (0) rance: +33 (0) Specifications subject Latin/S. m.: +54 (0) Netherlands: +31 (0) to change. US: +1 (800) Germany: +49 (0) hina: +86 (0)
30 te.com 2011 Tyco lectronics orporation, a T onnectivity Ltd. ompany. ll s Reserved LUG P 04/2011 T onnectivity, T connectivity (logo) and T (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners.
MultiGig RT Product Family Slot Pitch Density Data Rate RT lines/inch Gbps lines/inch Gbps RT lines/inch 6.50 Gbp
1 MultiGig RT Assembly! # # "$#! MultiGig RT Product Family Slot Pitch Density Data Rate RT1 0.8 113 lines/inch 3.125 Gbps 1.0 141 lines/inch 3.125 Gbps RT2 0.8 85 lines/inch 6.50 Gbps* 1.0 113 lines/inch
More informationELECTRONICS DIVISION. METRAL 2mm HIGH-SPEED CONNECTORS 1000 SERIES, 2000 SERIES, 4000 SERIES
ELECTRONICS DIVISION METRAL 2mm HIGH-SPEED CONNECTORS 1000 SERIES, 2000 SERIES, 4000 SERIES FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connects.
More informationQuick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
More informationQuick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
More informationQuick Reference Guide 1.5 mm AMP Mini CT Connector Series
Quick Reference Guide The AMP Mini CT connectors are miniature wire-to-board and wire-to-wire connectors. Like the standard AMP CT connector series, these connectors are tailored for improved harness productivity
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationTH 025 CONNECTOR SERIES
TH 025 CONNECTOR SERIES for the Automotive Industry TE AUTOMOTIVE /// TH 025 CONNECTOR SERIES TH 025 CONNECTOR SERIES for the Automotive Industry High density in limited spaces Product Features n TH 025
More informationCard Edge Connectors Catalog Issued 7-03
Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationDATASHEET. Automotive Surface-Mount Devices miniasmd/microasmd/nanoasmd/ahs/asmd Series
TSHT utomotive Surface-Mount evices minism/microsm/nanosm/hs/sm Series Since the 980 s we have provided PPT resettable devices for the automotive industry. In vehicle electronic equipment, our PolySwitch
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationTE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationAmphenol EP-QUAD-10G Quad 10G Base-T to XAUI Converter
1 mphenol EP-QU-10G Quad 10G ase-t to XUI onverter mphenol erospace adds 10G ase-t to XUI onverter to the Electronics Product Family. This product line is rugged, flexible, and affordable with many options
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationAXICOM Telecom-, Signal and RF Relays. W11 Relay V Nov. 07 Rev. C ECOC: JM10
108-98010 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More information501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities
501 Series irectional ontrol Valve Platform Featuring Higher Flow in a ompact Valve Package ommissioning apabilities Solenoid air pilot actuated Low wattage.8 wall for application solenoids Polarity insensitive
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationPRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationQuick Reference Guide Green Pushbutton and Toggle Series Switches
Quick Reference Guide Green Pushbutton and Toggle Series Switches The Green Series switch offering includes both pushbutton and toggle switches all rated to 6A/3A@125/250VAC and 4A@28VDC. The life expectancy
More informationSRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard
SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:
More informationRoHS. Sensor Technologies. for the Automotive Industry. Ready
RoHS Ready Sensor Technologies for the Automotive Table of Contents Highlights 2 3 Sensor Innovations 4 6 3 3 3 3 3 Brake Sensors Introduction 7 3 8 10 Clutch Introduction 11 12 15 3 Engine / E-Motor Introduction
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationStation Post Insulators
TE Energy covers a wide range of polymeric, porcelain and hybrid insulators. For decades these products have demonstrated reliable performance in various types of applications all over the world. TE s
More information3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM FOR THE UTOMOTIVE INDUSTRY TE UTOMOTIVE /// TLOG SOLUTIONS FOR FUTURE MOILITY The pace at which the E&E architecture of vehicles is being innovated is one of the major challenges
More informationMIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS
QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationHIGH SPEED MEZZANINE PRODUCT SPECIFICATION
OARD TO OARD CONNECTOR 75005 Receptacle Assembly 75003 Plug Assembly Table of Contents 1.0 Scope 2.0 Product Description 3.0 Applicable Documents and Specifications 4.0 Ratings 5.0 Performance 5.1 Qualification
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationHYDRAULIC CRIMP TOOLING SOLUTIONS
HYDRAULIC CRIMP TOOLING SOLUTIONS A Comprehensive Guide to TE Hydraulic Tooling Solutions Hydraulic Powered Crimp Tooling for 10,000 psi FAST FACTS Industry standard 10,000 psi hydraulic system pumps and
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationECONOMY POWER 2.5 CONNECTORS
ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationCorcom Product Guide. Introduction. Catalog: Issue Date:
Introduction Power Inlet ilters feature power sockets integrated with MI filters enclosed in RI jackets. The power socket complies with I an standard to assure worldwide power cord compatibility. These
More informationMicro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More information503 Series Solenoid Pilot Actuated Valves
Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationPowerMod PSX. Connector Series SPECIFICATIONS. Features. Blindmate Housings Allows PCB boards connections in tough to reach applications.
PowerMod PSX onnector Series he PowerMod PSX family of connectors is designed to offer low profile, high density, board to board blindmate connectors that provide either power contacts or power and signal
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for
More informationMI-ComPAC DC-DC Switchers
MI-omP - Switchers 5 3 Watts; 1 3 Outputs eatures & enefits Inputs 28 and 27V Transient protection: 28V designed to meet MIL-ST-74-, MIL-ST-1275// and O-16 One, two or three outputs Outputs: 2 48V Up to
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More information9 ORDERING INFORMATION MTJ MTJ SERIES
MODULR JKS Introduction: dam Tech MTJ series Modular Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules and regulations. dam Tech offers a multitude
More informationCMC/CPP/CMB SERIES. Power & signal connectors with screw locking system. Human photo. Can be environmental/ documentaty style or portrait of engineer.
Human photo. Can be environmental/ documentaty style or portrait of engineer. CMC/CPP/CMB SERIES Power & signal connectors with screw locking system CMC/CPP/CMB SERIES /// POWER & SIGNAL CONNECTORS Contents
More informationApr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationStac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
More informationIntel G35 Express Chipset
Intel G35 Express hipset Thermal and Mechanical esign Guidelines For the Intel 82G35 Graphics and Memory ontroller Hub (GMH) ugust 2007 ocument Number: 31709-001 INFORMTION IN THIS OUMENT IS PROVIE IN
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More informationMODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
More informationAmphenol Amphenol Pcd
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems MIL-T-1714 Series I lass MIL-T-1714 Series I unction Modules QPL-approved MIL-T-1714
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
More informationNumatics, Inc. is a leading manufacturer of pneumatic products and motion control products.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant
More informationCatalog C-001 Rev. G
atalog -001 Rev. G Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector
More informationWirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Tubular FETURES High temperature vitreous coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More information