TN værktøjsslibning Standard Program

Transcription

1 TN Standard Program Data sheets Price lists Cutting data

2 TN rev We are not liable for faults or deficiencies or for modifications of data or prices. All material is protected by copyright and may not be used without the consent of the author. See our terms and conditions of sale and delivery. 02

3 Contents Material categories 04 TN P-Jet 17 Excellent characteristics in hardened and stainless steel. TN E-Jet 27 All-round suitability for all materials (cast iron, steel up to HRC 69 and hard materials). TN R-Jet 37 Specially developed for use in stainless steel. TN Tiger 45 A high-speed 6-flute end mill that can work in almost any material. TN H-Jet 53 A high-speed end-mill with 10 to 16 flutes (provides the unique surface finish). TNX-S 61 Roughing end mill for processing cast iron and steel. TN ME-Jet 67 Miniature end mills for both roughing and finishing copper and steel (3D & 5D). TN MC-Jet 77 Miniature convex end mills for both roughing and finishing copper and steel (3D & 5D). TN HFC 87 High feed cutter, an alternative to convex end mills, but much faster. TN Twin-Jet 95 Convex end mills (15º & 45º) specially designed for 3D processing in hardened steel. TN F-Jet 103 Triple-flute chamfered tool developed with a 30º helix for almost all materials. TN NC-Drill 111 NC spotting drill with 90º or 120º angle of cutting edge (can be used for chamfering). TN Alu-Jet 119 High-speed end mill (finishing/roughing/3d) for plastic, acrylic, brass, copper and aluminium. TNX-A 127 High-speed roughing end mill for aluminium and other soft materials. TN Broaches (Stosser) 131 Highly accurate hexagonal holes in seconds during rotation. Material categories 135 Terms and conditions of sale and delivery 147 ISO certification 148 TN information 149 Specialised tools (Custom made)

4 Material Material group Standard Material description Soft steel 1 N/mm2 / <525 Brinell / <120 EN No , , , , , , , , , , (EUR DIN no.) DIN 20 Mn 5, 30 Mn 5, C 10, C 15, C 22, C 25, Ck 10, Ck 15, Ck 22, Ck 25, St 37-2, St 37-3, St 44-2, St 44-3 N EN std. EUR C 10, C 10E, C 15R, C 22E, C22+N, C25+N, G 28 Mn6, S235JR, S235JRG2, S275J0H, S275J2G3 Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) 20 M 5, AF 34 C 10, AF 37 C 12, AF 50 C 30, C 20, E 24-2, E 24-3, E 24-4, E 28-2, E 28-3, E 28-4, XC 10, XC 15, XC 18, XC 25 BS (Britan) 040 A 10, 040 A 22, 045 M 10, 050 A 20, 060 A 25, 070 M 26, 080 M 15, 120 M 19, 120 M 36, C, B, C UNI (Italian std) C 10, C 15, C 16, C 20, C 21, C 25, Fe 360 B, Fe 360 D FF, Fe 430 B FN, Fe 430 D FF, G 22 Mn 3 JIS (Japan std.) S 10 C, S 15 C, S 15 CK, S 20 CK, S 22 C, S 25 C, S 9 CK, SCMn 2, SM 41 B, SM 41 C, SMn 1 H, SMnC 420, STKM 12 C SS 1265, 1311, 1312, 1313, 1350, 1370, 1412, 1414, 1450, (Swedish std.) UNS G10100, G10170, G10200, G10220, G10250, G13300 (U.N.E. China) AISI/ASTM/SAE 1010, 1015, 1022, 1023, 1025, 1330, 1518, A 570 Gr. 40, A 573 Gr. 58, A 573 Gr. 70 (US std.) Soft steel 2 N/mm2 / <700 Brinell / <200 EN No , , , , , , , (EUR DIN no.) DIN 15 S 20, 35 S 20, 46 S 20, 60 S 20, 9 S 20, 9 SMn 28, 9 SMn 36, 9 SMnPb 28, 9 SMnPb 36 EN std. EUR 11 SMn30, 11 SMn37, 11 SMnPb 37, 11 SMnPb30, 15 SMn13, 35 S20, 46 S20, 60 S20 Werkstoff No , , , , , , , , AFNOR 35 MF 4, 45 MF 4, 60 MF 4, S 250, S 250 Pb, S 300, S 300 Pb (French std.) BS 210 A 15, 212 M 36, 212 M 44, 220 M 07, 230 M 07, 240 M 07 (Britan) UNI CF 9 S 22, CF 9 SMn 28, CF 9 SMn 36, CF 9 SMnPb 28, CF 9 SMnPb 36 (Italian std) JIS SUM 21, SUM 22, SUM 22 L, SUM 32 (Japan std.) SS 1912, 1914, 1922, 1926, 1957, 1973 (Swedish std.) UNS G11400, G11460, G12120, G12130, G12134, G12144, G12150 (U.N.E. China) AISI/ASTM/SAE 1140, 1146, 12 L 13, 12 L 14, 1212, 1213, 1215 (US std.) Steel 3 N/mm2 / <600 Brinell / <175 EN No , , , , , , , , (EUR DIN no.) DIN 14 Ni 6, 16 Mo 5, 36 Mn 5, 40 Mn 4, C 30, C 35, C 40, C 45, C 50, Ck 30, Ck 35, Ck 40, Ck 50, Ck 55, St 52-3, St 70-2 EN std. EUR C 30E, C 35E, C 40 E, C 50E, C 55E, C35+N, C40+N, C50+N, E 335, E 360, G 28 Mn6+QT, S355JR Werkstoff No , , , , , , , , , , , , , , , AFNOR (French std.) 16 N 6, 35 M 5, 40 M 5, A 70-2, AF 55 C 35, AF 60 C 40, AF 65 C 45, C 30, C 50, E 36-3, E 36-4, XC 32, XC 38 H1, XC 42 H1, XC 48 H1, XC 55 BS (Britan) 060 A 30, 060 A 35, 070 M 55, 080 A 30, 080 M 36, 080 M 40, 080 M 46, 080 M 50, 150 M 36, , C UNI 14 Ni 6, 16 Mo 5, C 35, C 40, C 45, C 50, Fe 510 B, Fe 510 C, Fe 510 D, Fe 690 (Italian std) JIS SB 450 M, S 30 C, S 35 C, S 40 C, S 45 C, S 50 C, S 55 C, SM 50 YA, SMn 438 (H); SCMn 3 (Japan std.) SS 1550, 1572, 1650, 1655, 2120, 2132, 2172 (Swedish std.) UNS G10340, G10350, G10390, G10430, G13350, G45200 (U.N.E. China) AISI/ASTM/SAE (US std.) 1030, 1035, 1039, 1040, 1045, 1049, 1050, 1055, 1335, 4520, A 350-LF 5 04

5 Material Material group Standard Material description Alloy Steel 4 N/mm2 / <675 Brinell / <150 Formax EC80 ESP65 MoC 201M VC 510 MoC 310M FERMO THG 2000 EN No. (EUR DIN no.) DIN , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ni 19, 13 Cr 2, 13 CrMo 4 4, 14 MoV 6 3, 14 NiCr 10, 14 NiCr 14, 15 Cr 3, 15 CrMo 5, 15 CrMoV 5 9, 15 CrNi 6, 15 Mo 3, 15 NiCr 14, 16 CrMo 4 4, 16 MnCr 5, 16 MnCrS 5, 18 CrNi 8, 18 CrNiMo 6, 20 CrMo 2, 20 CrMo 5, 20 MnCr 5, 20 MnCrS 5, 20 MoCr 4, 20 MoCrS 4, 21 MnCr 5, 21 NiCrMo 2, 23 CrMoB 3 3, 25 CrMo 4, 25 MoCr 4, 25 MoCrS 4, 28 Cr 4, 28 NiCrMo 4, 30 CrMoV 9, 30 CrNiMo 8, 31 CrMoV 9, 31 NiCr 14, 32 Cr 2, 32 CrMo 12, 34 Cr 4, 34 CrMo 4, 35 CrMo 4, 35 NiCr 18, 36 CrNiMo 4, 36 NiCr 10, 36 NiCr 6, 37 Cr 4, 37 MnSi 4, 38 Cr 2, 38 MnSi 4, 39 CrMoV 13 9, 40 CrMnMo 7, 40 CrMn- MoS 8 6, 40 CrMnNiMo 8, 41 Cr 4, 41 CrMo 4, 42 Cr 4, 42 CrMo 4, 42 CrV 6, 42 MnV 7, 43 CrMo 4, 44 Cr 2, 46 Cr 2, 46 MnSi 4, 48 CrMo 4, 50 CrMo 4, 50 CrV 4, 50 MnSi 4, 53 MnSi 4, 55 Cr 3, 55 Si 7, 58 SiCr 8, 60 SiCr 7, 62 SiMnCr 4, C 45 W, C 55 W, C 60, C 60 W, C 67 W, C 70 W1, C 70 W2, C 80 W2, C 85 W, Ck 45, Ck 60, Ck 67, Ck 75, GS-50 CrV 4, St 60-2, X 10 Cr 13, X 10 CrAl 13, X 10 CrAl 24, X 12 Cr 13, X 12 CrMoS 17, X 12 CrS 13, X 15 Cr 13, X 2 CrMoTi18 2, X 2 CrMoTi18 2, X 2 CrNi 12, X 5 CrNi 13 4, X 5 CrTi 12, X 6 Cr 13, X 6 Cr 17, X 6 CrAl 13, X 6 CrMo 4, X 6 CrTi 17, X 8 CrNb 17 EN std. EUR 13 CrMo 45, 14 NiCr 14, 16 MnCr 5, 16 MnCrS 5, 16 Mo 3, 17 CrNiMo 6, 20 CrMo 5, 20 MnCr 5, 20 MnCrS 5, 20 NiCrMoS 22, 25 CrMo 4, 28 Cr4, 31 CrMoV 9, 34 Cr 4, 34 CrMo 4, 36CrNiMo4+TA, 38 Cr2, 41 Cr 4, 42 CrMo 4, 50 CrV 4, 50 MnSi4, 55 Cr 3, 55 SiCr7, C 45E, C 60E, C 67S, C 75S, C60+N, E 335, X 10 CrAl 13, X 10 CrAl 24, X 12 Cr 13, X 12 CrS 13, X 14 CrMoS 17, X 2 CrMoTi 182, X 2 CrNi 13, X 3 CrNb 17, X 3 CrN- IMo 133, X 5 CrTi 12, X 6 Cr 13, X 6 Cr 17, X 6 CrAl 13, X 6 CrMo 4, X 6 CrTi 17 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Z 18 N 5, 10 NC 12, 12 C 3, 12 CD 4, 12 NC 15, 14 NC 11, 15 CD 3.5, 15 CD 4.5, 15 D 3, 16 MC 5, 16 NC 6, 18 CD 4, 18 NCD 6, 20 MC 5, 20 MnCrS 5, 20 NC 5, 20 NC 6, 20 NCD 2, 25 CD 4 S, 30 CD 12, 30 CND 8, 30 NC 11, 32 C 4, 32 CDV 12, 34 CD 4, 35 CD 4, 35 NC 11, 35 NC 6, 38 C 2, 38 C 4, 40 CMD 8S, 40 CND 8, 40 NCD 3, 42 C 2, 42 C 4, 42 C 4 TS, 42 CD 4, 42 CD 4 TS, 50 CV 4, 55 C 3, 55 S 7, 60 SC 7, A 60-2, CC 55, XC 42, XC 60, XC 68, XC 75, Y1 80, Y3 42, Y3 55, Y3 90, Z 10 C 13, Z 10 CAS 24, Z 10 CF 17, Z 12 C 13, Z 12 CF 13, Z 5 CN 13.4, Z 6 C 12, Z 6 CA 13, Z 6 CT 12, Z 8 C 17, Z 8 CNb 17, Z 8 CT A 67, 060 A 78, 080 A 62, 080 M 46, , Gr. 27, , 1717 CDS 110, 250 A 53, 403 S 17, 405 S 17, 409 S 19, 410 S 21, 416 S 21, 420 S 29, 425 C 11, 430 S 15, 4360-SSC, 4360-SSE, 441 S 29, 523 M 15, 527 A 60, 527 M 17, 530 A 30, 530 A 32, 530 A 36, 530 A 40, 530 M 40, 640 A 35, 653 M 31, 655 M 13, 708 A 37, 708 A 47, 708 M 40, 722 M 24, 735 A 50, 805 M 20, 816 M 40, 820 A 16, 823 M 30, 897 M 39, BH 12, BW 1 B, S CrMo 4, 14 CrMo 4 5, 16 CrNi 4, 16 MnCr 5, 16 Mo 3, 16 NiCr 11, 18 NiCrMo 7, 20 MnCr 5, 20 NiCrMo 2, 25 CrMo 4 (KB), 30 NiCrMo 8, 32 CrMo 12, 34 Cr 4 (KB), 35 CrMo 4, 35 NiCr 9, 36 CrMoV 13 9, 38 Cr 2, 38 Cr 4, 38 NiCrMo 4 (KB), 41 Cr 4, 42 CrMo 4, 45 Cr 2, 51 CrV 4, 55 Cr 3, 55 Si 8, 60 SiCr 8, C 45, C 60, C 70, C 75, C 80 KU, Fe 590; Fe 60-2, X 10 CrAl 12, X 10 CrS 17, X 12 Cr 13, X 12 CrS 13, X 16 Cr 26, X 6 Cr 13, X 6 CrAl 13, X 6 CrNb 17, X 6 CrNi 13 04, X 6 CrTi 12, X 6 CrTi 17, X 8 Cr 17 S 45 C, S 58 C, SCCrM 3, SCM 415 (H), SCM 420, SCM 421, SCM 430, SCM 432, SCM 440, SCM 440 (H), SCM 445 (H), SCR 415, SCr 415 (H), SCR 420 H, SCr 430 (H), SCr 440, SCr 440 (H), SCS 5, SK 3, SK 5, SK 6, SK 7, SM 58, SMnC 21 H, SMnC 420 (H), SNC 22, SNC 415 (H), SNC 815 (H), SNC 836, SNCM 220 (H), SNCM 431, SUH 409, SUH 442, SUP 10, SUP 7, SUP 9 (A), SUS 403, SUS 405, SUS 410, SUS 410 J 1, SUS 416, SUS 430, SUS 430 F, SUS 430 LX 1665, 1672, 1678, 1770, 1774, 1778, 2085, 2090, 2216, 2225, 2230, 2234, 2240, 2244, 2245, 2253, 2301, 2302, 2320, 2326, 2380, 2383, 2385, 2506, 2511, 2912, G33106, G50150, G10420, G10600, G10640, G10700, G10780, G41300, G41350, G41400, G41420, G41470, G51170, G51200, G51320, G51400, G51550, G86170, G98400, H61500, J91201, S40500, S40900, S40977, S41000, S41008, S41500, S41600, S43000, S43020, S43036, S44600, T 51606, T , 1064, 1070, 1078, 1080, 2515, 309, 3135, 3310, 3415, 3435, 403, 405, 409 L, 410, 410 S, 4130, 4135, 4137, 4140, 4142, 4150, 416, 430, 430 F, 430 Nb, 430 Ti, 4320, 444, 446, 5015, 5045, 5115, 5120, 5120 H, 5130, 5132, 5135, 5140, 5155, 6150, 6150H, 8620, 9255, 9262, 9314, 9840, A 182-F11, A 204 Gr. A, A 387 Gr. 12 Cl. 2, A182-F12, CA-15, P 20, P 20+S, P20+Ni, P6 05

6 Material Material group Standard Material description Alloy Steel 5 N/mm2 / <1025 Brinell / <300 Orvar Supreme Orvar 2 Microdized MoCN 315M Grane - Caldie Calmax - Dievar Hotvar QRO90 Supreme Ramax LH Unimax Vidar Supreme EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , , , , , , , , , , DIN 10 CrMo 9 10, 100 Cr 6, 100 MnCrW 4, 100 V 1, 105 WCr 6, 115 CrV 3, 120 WV 4, 14 CrMoV 69, 14 NiCr 18, 21 CrMoV 57, 32 NiCrMo 145, 34 CrAl 6, 34 CrAlMo 5, 34 CrAl- Ni 7, 34 CrAlS 5, 34 CrNiMo 6, 40 NiCrMo 22, 40 NiCrMo 6, 41 CrAlMo 7, 45 WCrV 7, 50 NiCr 13, 58 CrV 4, 60 MnSiCr 4, 60 WCrV 7, 67 SiCr 5, 90 CrSi 5, 90 Mn 4, 90 MnCrV 8, C 105 W1, C 105 W2, C 110 W, C 125 W, C 135 W, C 75 W, C 80 W1, Ck 101, G-X 28 CrMoV 51, G-X 37 CrMoW 51, GS-34 CoCrMoV 1912, X 18 CrN 28, X 19 NiCrMo 4, X 20 Cr 13, X 20 CrMoWV 121, X 20 CrNi 17 2, X 22 CrMoV 121, X 30 Cr 13, X 36 CrMo 17, X 4 CrNiMo 165, X 40 Cr 13, X 45 Cr 13, X 45 CrNiW 189, X 45 NiCrMo 4, X 65 CrMo 14, X 80 CrNiSi 20, X 90 CrMoV 18 EN std. EUR 10 CrMo 910, 100 Cr 6, 105 WCr 6, 107 CrV 3, 14 CrMoV 69, 34 CrAl 6, 34 CrAlNi 7, 34 CrNiMo 6, 41 CrAlMo 710, 90 MnCrV 8, C 100S, C 105U, C 75 W, X 18 CrN 28, X 20 Cr 13, X 20 CrMoWV 121, X 20 CrNi 17 2, X 22 CrMoV 121, X 30 Cr 13, X 38 CrMo 16, X 39 Cr 13, X 4 CrNiMo 165, X 45 Cr 13, X 45 CrNiW 189, X 45 NiCrMo 4, X 70 CrMo 15, X 80 CrNiSi 20, X 90 CrMoV 18 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) 10 CD 9.10, 100 C 3, 100 C 6, 105 WC 13, 110 WC 20, 20 CDV 5.07, 30 CAD 6.12, 34 CAND 7, 35 NCD 14, 35 NCD 6, 40 CAD 6.12, 40 NCD 2, 45 NCD 17, 55 WC 20, 90 MV 8, 90 MWCV 5, Y1 105, Y1 105 V, Y1 80, Y1 90, Y2 120, Y2 140, Z 15 CN 16.02, Z 18 C 25, Z 2 CND 18 05, Z 20 C 13, Z 21 CDV 12, Z 30 C 13, Z 35 CNWS 18.09, Z 35CD17, Z 40 C 14, Z 6 CND , Z 70 D 14, Z 80 CSN (420 S 45), 060 A 96, Gr. 31, 311-Type 6, 311-Type 7, 331 S 40, 409 S 19, 420 S 37, 420 S 45, 431 S 29, 443 S 65, 534 A 99, 817 M 40, 830 M 31, 905 M 31, 905 M 39, BF 1, BO 1, BO 2, BS 1, BW 1A, BW 2, EN 20B 100 Cr 6, 102 V 2 KU, 107 CrV 3 KU, 107 WCr 5 KU, 110 W 4 KU, 12 CrMo 9 10, 34 CrAlMo 7, 35 NiCrMo 6 (KW), 40 NiCrMo 2 (KB), 41 CrAlMo 7, 42 NiCrMo 15 7, 45 WCrV 8 KU, 55 WCrV 8 KU, 90 MnVCr 8 KU, 95 MnWCr 5 KU, C 100 KU, C 120 KU, C 140 KU, C 80 KU, X 16 CrNi 16, X 20 Cr 13, X 30 Cr 13, X 38 CrMo 16 1 KU, X 40 Cr 14, X 45 CrNiW 18 9, X 80 CrSiNi 20, X CrTi 12, X22 CrMoV 12 1 SACM 645, SK 1, SK 2, SK 3, SKS 3, SKS 31, SKS 43, SNCM 240, SNCM 439, SNCM 447, SUH 31, SUH 4, SUJ 2, SUP 4, SUS 420, SUS 420 J 1, SUS 420 J 2, SUS 431, SUS 440 A, SUS 440 B 1870, 1880, 2140, 2218, 2258, 2303, 2304, 2314, 2317, , 2322, 2327, 2387, 2541, 2710, 2940 G10950, G51986, G87400, J 21890, J91153, K 23545, K 23745, K 24065, K 52440, S40280, S42000, S42200, S43100, S44002, S44003, S44600, S65006, T 72302, T31501, T31502, T41901, T61202, T , 420, 422, 431, 4340, 440 A, 440 B, 446, 52100, 6F7, 8740, A 182-F22, A 355 Cl. A, A 355 Cl. D, L2, O1, O2, S1, SAE HNV 3, SAE HNV 6, W 108, W 110, W 112, W 210, W1 06

7 Material Material group Standard Material description Alloy Steel 6 N/mm2 / <400 Brinell / <1025 EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , , , , DIN 54 NiCrMoV 6, 55 NiCrMoV 6, 57 NiCrMoV 7 7, 75 CrMoNiW 6 7, 81 CrMov 42 16, G-X 165 CrCoMo 12, G-X 165 CrMoV 12, G-X 165 CrV 12, S , S , S , S , S , S , S , S , S , S 2-9-1, S 2-9-2, S , S 3-3-2, S 6-5-2, S , S 6-5-3, S 6-5-3C, S , X 100 CrMoV 51, X 105 CrMo 17, X 155 CrVMo 121, X 165 CrMoV 12, X 2 NiCoMoTi , X 210 Cr 12, X 210 CrW 12, X 3 NiCrMo , X 30 WCrV 5 3, X 30 WCrV 9 3, X 32 CrMoCoV 3 3 3, X 32 CrMoV 3 3, X 38 CrMoV 5 1, X 38 CrMoV 5 3, X 40 CrMoV 5 1 EN std. EUR 54 NiCrMoV 6, HS , HS , HS , HS , HS , HS , HS , HS , HS , HS 2-9-1, HS 2-9-2, HS 3-3-2, HS 6-5-2, HS , HS 6-5-3, HS , S-6-5-3C, X 100 CrMoV 5, X 105 CrMo 17, X 155 CrVMo 12 1, X 210 Cr 12, X 40 CrMoV 5 1 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) 55 NCDV 6, 32 DCV 28, 55 NCDV 7, E-Z 2 NKD 18, Z 100 CD 17, Z 100 CDV 5, Z 100 DCWV , Z 110 DKCWV , Z 110 WKCDV , Z 120 WDCV , Z 130 WKCDV , Z 160 CDV 12, Z 2 NKD 19-09, Z 200 C 12, Z 30 WCV 9, Z 32 WCV 5, Z 38 CDV 5, Z 40 CDV 5, Z 80 WCV , Z 80 WKCV , Z 85 DCWV , Z 85 WDCV , Z 85 WDKCV BA 2, BD 2, BD 3, BH 10, BH 11, BH 13, BH 21, BH 224, BM 1, BM 2, BM 34, BM 4, BM 42, BT 1, BT 4, BT 42, BT 5 30 CrMoV KU, HS 1-8-1, HS , HS , HS , HS , HS , HS 2-9-2, HS 3-3-2, HS 6-5-2, HS , HS 6-5-3, HS , X 100 CrMoV 5 1 KU, X 105 CrMo 17, X 155 CrVMo 12 1 KU, X 165 CrMoW 12 KU, X 210 Cr 13 KU, X 215 CrW 12 1 KU, X 30 WCrV 5 3 KU, X 30 WCrV 9 3 KU, X 37 CrMoV 5 1 KU, X 40 CrMo KU SKD 1, SKD 11, SKD 12, SKD 2, SKD 4, SKD 5, SKD 6, SKD 61, SKD 7, SKH 2, SKH 3, SKH 4 A, SKH 51, SKH 52; SKH 53, SKH 53, SKH 55, SKH 57, SKH 9, SKT 4, SUS 440 C 2242, 2260, 2310, 2312, 2722, 2723, 2782, K 93120, S44004, T 11301, T 11302, T11307, T11323, T11323, T11333, T11341, T11342, T12001, T12004, T12005, T12015, T20810, T20811, T20813, T20821, T30102, T30402, T30403, T F2, 18 MAR 300, 440 C, A2, D2, D3, H10, H11, H13, H21, H41, L6, M1, M2, M3, M3 Cl. 2, M33, M34, M35, M41, M42, M7, T1, T15, T4, T5 AISI/ASTM/SAE (US std.) Hardened Steel 7 N/mm2 / <440 Brinell / <1400 MoCN 315M EN No Impax HI Hard (EUR DIN no.) Nimax DIN X 120 Mn 12, HS6-5-3, X155CrMov121, X210CrW12 Toolox 44 EN std. EUR X 120 Mn 12, HS , HS6-5-3, X153CrMov12, X210CrW12 Chipper Werkstoff No , , , , , , , , AFNOR Z 120 M 12 (French std.) BS BW 10 (Britan) UNI SC MnH 1 (Italian std) JIS (Japan std.) SS 2092, , , , , 2183, , , , , (Swedish std.) , , , 2317, , UNS (U.N.E. China) AISI/ASTM/SAE (US std.) A128 Grade A 07

8 Material Material group Standard Material description Stainless N/mm2 / <725 Brinell / <225 EN No , , , , , , , (EUR DIN no.) DIN X 10 CrNiS 18 9, X 12 CrNi 17 7, X 12 CrNi 18 8, X 5 CrNiNb 18 10, X 6 CrNi 18 10, X 6 CrNi 18 11, X 6 CrNi 18 12, X 6 CrNiNb EN std. EUR X 8 CrNiS 18 9, X 9 CrNi 18 8, X 12 CrNi 18 8, X 5 CrNiNb 18 10, X 5 CrNi 18 9, X 6 CrNi 18 11, X 4 CrNi 18 11, X 6 CrNiNb Werkstoff No , , , , , , , AFNOR (French std.) Z 10 CNF 18.09, Z 12 CN 17.07, Z 12 CN 18, Z 6 CN 18.09, Z 6 CN 18.09, Z 6 CNNb 18.10, Z 8 CN FF BS 301 S 21, 302 S 25, 303 S 31, 304 S 31, 304 S 51, 305 S 19, 347 S 31, 347 S 31 (Britan) UNI (Italian std) X 10 CrNi 18 09, X 12 CrNi 17 07, X 5 CrNi KW, X 5 CrNi 18 11, X 6 CrNiNb 18 11, X 6 CrNiNb 18 11, X 7 CrNi JIS SUS 301, SUS 302, SUS 303, SUS 304, SUS 304 H, SUS 305, SUS 347 (Japan std.) SS 2331, 2333, 2338, 2346 (Swedish std.) UNS S30100, S30200, S30300, S30400, S30480, S30500, S34700, S34800 (U.N.E. China) AISI/ASTM/SAE 301, 302, 303, 304, 304 H, 305, 308, 347, 348 (US std.) Stainless N/mm2 / <725 Brinell / <225 EN No. (EUR DIN no.) , , , , , , , , , , , , , DIN X 10 CrNiMoNb 18 12, X 12 CrNi 25 21, X 12 CrNiTi 18 9, X 12 CrNiWTi 16 3, X 15 CrNiSi 20 12, X 2 CrNi 19 11, X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiN 19 11, X 5 CrNiMo , X 6 CrNi 18 9, X 6 CrNiMoNb , X 6 CrNiMoTi EN std. EUR X 5 CrNiMoNb , X 12 CrNi 25 21, X 12 CrNiWTi 16 3, X 15 CrNiSi 20 12, X 2 CrNi 19 11, X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiN 18 10, X 3 CrNiMo , X 5 CrNi 19 10, X 5 CrNiMo , X 6 CrNiMoNb , X 6 CrNiMoTi , X 6 CrNiTi Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) Z 12 CN 25.20, Z 17 CNS 20.12, Z 2 CN Az, Z 2 CN 18.10, Z 2 CND , Z 2 CND 17.13, Z 2 CND , Z 6 CN 18.10M, Z 6 CND , Z 6 CNDNb 17.12, Z 6 CNDNb 17.13, Z 6 CNDT 17.12, Z 6 CNNb 18.10, Z 6 CNT C 15, 304 S 12, 304 S 62, 309 S 24, 310 S24, 316 S 11, 316 S 12, 316 S 33, 317 S 12, 318 C 17, 318 S 17, 320 S 31, 321 S 51 X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiMo 18 16, X 2 CrNiN 18 11, X 3 Cr Ni 18 11, X 5 CrNiMo , X 6 CrNi 26 20, X 6 CrNiMoNb 17 12, X 6 CrNiMoNb 17 13, X 6 CrNiMoTi 17 12, X 6 CrNiTi SCS 13, SCS 16, SCS 22, SUH 309, SUH 310, SUS 304 L, SUS 304 LN, SUS 310 S, SUS 316, SUS 316 L, SUS 316 Ti, SUS 317 L, SUS , 2337, 2343, 2348, 2350, 2352, 2353, 2361, 2367, 2371 JIS (Japan std.) SS (Swedish std.) UNS S31603, S30403, S30453, S30900, S31008, S31600, S31603, S31640, S31703, S32100, S34700 (U.N.E. China) AISI/ASTM/SAE 304 L, 304 LN, 309, 310 S, 316, 316 Cb, 316 L, 316 Ti, 317 L, 318, 321, 321 H, 347 H, CF8 (US std.) 08

9 Material Material group Standard Material description Stainless N/mm2 / <725 Brinell / <225 EN No , (EUR DIN no.) DIN X 15 CrNiSi 25 20, X 5 CrNiMo EN std. EUR X 15 CrNiSi 25 20, X 5 CrNiMo Werkstoff No , AFNOR Z 15 CNS 25.20, Z 3 CND (French std.) BS 314 S 25, 316 S 31 (Britan) UNI X 16 CrNiSi 25 20, X 5 CrNiMo (Italian std) JIS SUH 310, SUS 316 (Japan std.) SS 2347 (Swedish std.) UNS S31000, S31600 (U.N.E. China) AISI/ASTM/SAE 310, 314, 316 (US std.) Stainless N/mm2 / <1250 Brinell / <365 EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , DIN X 1 CrNiMoN , X 1 NiCrMoCuN , X 10 NiCrAlTi 32 20, X 12 NiCrSi 36 16, X 2 CrMoNiCuN , X 2 CrNiMoCuWN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiN 23 4, X 2 NiCrMoCu , X 2 NiCrMoCu , X 4 CrNiCuNb 16 4, X 4 CrNiMo , X 5 CrNiCuNb 17 4 EN std. EUR X 1 CrNiMoN , X 1 CrNiMoN , X 1 NiCrMoCu , X 1 NiCrMoCuN , X 10 NiCrAlTi 32 20, X 12 NiCrSi 35 16, X 2 CrMoNiCuN , X 2 CrNi- MoCuWN25 7 4, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiN 23 4, X 2 NiCrMoCu , X 3 CrNiMo , X 4 CrNiCuNb 16 4, X 5 CrNiCuNb 16 4 Werkstoff No , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Incoloy 800, Z 2 CND Az, Z 2 CND Az, Z 2 CND Az, Z 2 NCDU 25 20, Z 20 NCS 33.16, Z 3 CND Az, Z 3 CND Az, Z 3 CND Az, Z 3 CND 25.7 Az, Z 4 CNUNb 16.4 M, Z 6 CNU S 61, 316 S 62, 316 S 63, 318 S 13, 332 S 15, 904 S 13, NA 17, X 1 CrNiMoN , Z 10 NC X 1 CrNiMoN , X 2 CrNiMoN 17 12, X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 3 CrNiMo NCF 800, SCS 24, SUH 330, SUS 316 LN, SUS 329 J 1, SUS 329 J 3L, SUS , 2327, 2328, 2375, 2377, 2562, 2564, 2778 N08028, N08330, N08800, N08904, S 31653, S15500, S17400, S31254, S31653, S31803, S32205, S32304, S32550, S32654, S32750, S32760, S , 316 LN, 318, 329, 329 LN, 330, 630, 904L, CN7M, F 53, F 55, XM-12 09

10 Material Material group Standard Material description Cast iron 12 N/mm2 / <675 Brinell / <225 EN No , , , , , , , (EUR DIN no.) DIN GG-10, GG-15, GGG-35.3, GGG-40, GGG-40.3, GTS-35-10, GTS-45-06, GTS EN std. EUR EN-GJL-100, EN-GJL-150, EN-GJS , EN-GJS , EN-GJS , EN- GJMB , EN-GJMB-450-6, EN-GJMB Werkstoff No , , , , AFNOR Ft 10 D, Ft 15 D, FGS , FGS , FGS , B 340/12, P 440/7, P 540/5 (French std.) BS (Britan) Grade 100, Grade 150, Grade 350/22, Grade 420/12, Grade 370/17, B 340/12, P 440/7, P 540/5 UNI G10, G15, GS , GSO 42/17, B 35-12, P 45-06, P (Italian std) JIS FC 100, FC 150, FCD L, FCD L, FCMB35-10, PCMP45-06, PCMP55-04 (Japan std.) SS , , , , , , , (Swedish std.) UNS F11401, F11601, F32800, F32800, F22200, F23130, F24130 (U.N.E. China) AISI/ASTM/SAE A18 20 B, A48 25 B, , , A , A , A (US std.) Cast iron 13 N/mm2 / <600 Brinell / <175 EN No , , , , , , , , , (EUR DIN no.) DIN GG-20, GG-25, GGG-50, GGG-60, GGG-NiCr 20 2, GGG-NiCr 20 3, GGG-NiMn 13 7, GGL-NiCr 20 2, GGL-NiCr 20 3, GTS EN std. EUR EN-GJL-200, EN-GJL-250, EN-GJS-500-7, EN-GJS-600-3, EN-GJSA-XNiCr20-2, EN-GJ- SA-XNiCr20-3, EN-GJSA-XNiMn13-7, EN-GJLA-XNiCr 20-2, EN-GJLA-XNiCr20-3, EN- GJMB Werkstoff No , , , , , , , , AFNOR (French std.) Ft 20 D, Ft 25 D, FGS 500-7, FGS 600-3, FGS Ni20 Cr2, FGS Ni20 Cr3, FGS Ni13 Mn7, FGL Ni20 Cr2, FGL Ni20 Cr3, P 570/3 BS (Britan) Grade 220, Grade 260, Grade 500/7, Grade 600/3, Grade S2, Grade S2B, Grade S6, Grade F2, P 570/3 UNI G20, G25, GS 500-7, GS 600-3, P (Italian std) JIS FC 200, FC 250, FCD 500-7, FCD 600-3, PCMP60-03 (Japan std.) SS , , , , , , (Swedish std.) UNS F12101, F12401, F33800, F34100, F43000, F43001, F41002, F41003, F24830 (U.N.E. China) AISI/ASTM/SAE (US std.) A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 Type 2, A436Type 2b, A Cast iron 14 N/mm2 / <750 Brinell / <200 EN No , , , , (EUR DIN no.) DIN GG-30, GGG-70, GGL-NiCuCr , GGL-NiCuCr , GTS EN std. EUR EN-GJL-300, EN-GJS-700-2, EN-GJLA-XNiCuCr15-6-2, EN-GJLA-XNiCuCr15-6-3, EN- GJMB Werkstoff No , , , AFNOR Ft 30 D, FGS 700-2, FGL Ni15 Cu6 Cr2, FGL Ni15 Cu6 Cr3, P 690/2 (French std.) BS Grade 300, Grade 700/2, Grade F1, P 690/2 (Britan) UNI G30, GS 700-2, P (Italian std) JIS FC 300, FCD 700-2, PCMP70-02 (Japan std.) SS , , (Swedish std.) UNS F13101, F34800, F41000, F41001, F26230 (U.N.E. China) AISI/ASTM/SAE (US std.) A48 45 B, A , A436 Type 1, A436 Type 1b, A

11 Material Material group Standard Material description Cast iron 15 N/mm2 / <1020 Brinell / <300 EN No. (EUR DIN no.) , , , , , , , , , , , , , DIN GG-35, GG-40, GGG-80, GGG-Ni 22, GGG-Ni 35, GGG-NiCr 30 1, GGG-NiCr 30 3, GGG- NiCr 35 3, GGG-NiMn 23 4, GGG-NiSiCr , GGG-NiSiCr , GGL-NiCr 30 3, GGL-NiSiCr , GGL-NiSiCr EN std. EUR EN-GJL-350, EN-GJS-800-2, EN-GJSA-XNi22, EN-GJSA-XNi35, EN-GJSA-XNiCr30-3, EN-GJSA-XNiCr35-3, EN-GJSA-XNiMn23-4, EN-GJSA-XNiSiCr20-5-2, EN-GJSA-XNiSi- Cr30-5-5, EN-GJLA-XNiCr 30-3, EN-GJLA-XNiSiCr Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Ft 35 D, Fgl 400, FGS 800-2, FGS Ni22, FGS Ni35, FGS Ni30 Cr1, FGS Ni30 Cr3, FGS Ni35 Cr3, FGS Ni23 Mn4, FGS Ni20 Si5 Cr2, FGS Ni30 Si5 Cr5, FGL Ni30 Cr3, FGL Ni20 Si5 Cr3, FGL Ni30 Si5 Cr5 Grade 350, Grade 400, Grade S3, Grade S2M, Grade F3 G35, GS FC 350, FCD , F13502, F14102, F36200, F41004, F43003, F43004, F43005, F43006, F43007, F43010 A48 50 B, A B, A , A439 Type D-2B, A439 Type D-5, A436 Type D-3A, A436 Type D-3, A436 Type D-5B, A439 Type D-2M, Nicrosilal Spheronic, A439 Type D-4, A436 Type 3, Nicrosilal, A436 Type D-4 11

12 Material Material group Standard Material description Aluminium 16 N/mm2 / <525 Brinell / <160 Alloys low Si Alu-leg les 10% Si/ Magnesium EN No. (EUR DIN no.) DIN EN std. EUR Al99, Al99.5, Al99.7, Al99.8, AlCu4Ti, AlCu4TiMg, AlCuBiPb, AlCuMg1, AlCuSiMn, AlMg1, AlMg1SiCu, AlMg2.5, AlMg2.7Mn, AlMg2Mn0.3, AlMg2Mn0.8, AlMg3, AlMg3, AlMg4.5Mn, AlMg4Mn, AlMg5, AlMg5(Si), AlMg9, AlMgSi0.5, AlMgSi0.7, AlMgSi1, AlMn0.5Mg0.5, AlMn0.5Mg0.5, AlMn1, AlMn1Cu, AlMn1Mg1, AlSi10Mg(Fe), AlSi6Cu4, AlSi7Mg, AlSi8Cu3(Si), AlSi9Mg, AlZn4.5Mg1, MgAl3Zn, MgAl6Mn, MgAl6Zn, MgAl8Zn, MgAl8Zn1, MgAl9Zn1, MgSe3Zn2Zr1 Al99, Al99.5, Al99.7, Al99.8, AlCu2.5Mg0.5, AlCuBiPb, AlCuMg1, AlCuMg2, AlCuSiMn, AlMg1, AlMg1.5, AlMg1SiCu, AlMg2.5, AlMg2.7Mn, AlMg2Mn0.3, AlMg2Mn0.8, AlMg3, AlMg4.5, AlMg4.5Mn, AlMg4Mn, AlMgSi0.5, AlMgSi0.7, AlMgSi1, AlMgSiPb, AlMn0.5Mg0.5, AlMn0.5Mg0.5, AlMn1, AlMn1Cu, AlMn1Mg1, AlZn4.5Mg1, AlZnMgCu0.5, AlZnMgCu1.5, G-AlCu4Ti, G-AlCu4TiMg, G-AlMg3, G-AlMg3Si, G-AlMg5, G-AlMg5, G-AlMg9, G-AlSi10Mg, G-AlSi5Mg, G-AlSi6Cu4, G-AlSi7Mg, G-AlSi8Cu3, G-AlSi9Mg, G-MgAg3Se2Zr1, G-MgAl3Zn, G-MgAl6Mn, G-MgAl6Zn, G-MgAl8Zn, G-MgAl8Zn1, G-MgAl9Zn1, G-MgMn2, G-Mg- Se3Zn2Zr1, G-MgTh3Zn2Zr1 AC-21000, AC-21100, AC-42000, AC-42100, AC-43200, AC-43400, AC-45000, AC-46200, AC-51100, AC-51200, AC-51400,, AW-1050A, AW-1070, AW-1080, AW-1200, AW-2011, AW-2014, AW-2024, AW-3003, AW-3004, AW-3005, AW-3103, AW-3105, AW-5005A, AW- 5049, AW-5052, AW-5083, AW-5086, AW-5251, AW-5454, AW-5754, AW-6060, AW-6061, AW-6063, AW-6082, AW-7020, AW-7075, MB 65110, MC 21110, MC 21120, MC 21230, MG-P-61, MG-P-62, MG-P-63 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) (6061), A-4/1200, A-5/1050A, A-7/1070, A-8/1080, A-G0.6, A-G1.5, A-G2.5C/5052, A-G2.5MC/5454, A-G2M, A-G2Mn0.8, A-G3M, A-G3T, A-G4.5MC, A-G4MC/5086, A-GS/6060, A-GSUC/6061, A-M1/3003, A-M1G/3004, A-MG0.5/3005, A-S10G, A-S10G, A-S7G, A-S7GO3, A-SGM0.7/6082, A-SGPb, A-U2G, A-U4G/2024, A-U4G1, A-U4SG/2014, A-U5GT, A-U5PbBi/2011, A-Z4GU, A-Z5G/7020, A-Z5GU/7075, G-A3-Z1, G-A6-Z1, G-A9, G-A92, G-M2, ZRE1 (H10), (H9)/(6060), (N4), (N5/6), 1A, 1B/1050A, 1C/1200, 2L69, 2L91/92, 2L95/96, 2L97/98, 2L99, A82, FC1/2011, H14, H15/2014, H17/7020, H20, H30/6082, LM25, LM5, LM9, MAG-E-101, MAG-E-111, MAG-E-121, MAG1-M, MAG3, MAG6-TE, N3/3103, N31, N4 /5251, N41/5005, N51/5454, N8/5083 (A1050), (A6063, A1200, A2011, A2017, A3003, A5052, A5082, A5454, A6061, A7075 UNI (Italian std) JIS 4004, 4005, 4007, 4010, 4054, 4103, 4104, 4106, 4107, 4115, 4120, 4125, 4140, 4163, 4212, (Japan std.) 4244, 4245, 4251, 4253, 4337, 4338, 4355, 4425, 4633, 4635, 4637 SS A02040, A05140, A13560, A13600, AA1050A, AA1070A, AA1080A, AA1200, AA2011, (Swedish std.) AA2014, AA2017A, AA2024, AA2117, AA3003, AA3004, AA3005, AA3103, AA3105, AA5005A, AA5049, AA5050B, AA5052, AA5082, AA5083, AA5086, AA5251, AA5454, AA5754, AA6005, AA6012, AA6060, AA6061, AA6082, AA7020, AA7022, AA7075, AM60A, AZ31B, AZ61A, AZ80A, AZ81A, AZ91A/B, B80, M1A UNS 204, 359,2, 4418, 4437, 4442, 5056A, 5140, A380, B26, B85 (U.N.E. China) AISI/ASTM/SAE A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 (US std.) Type 2, A436Type 2b, A Aluminium 17 N/mm2 / <450 Brinell / <135 Alloys High Si EN No. AlSi10Mg(Cu), AlSi12, AlSi11Cu2(Fe), AlSi12Cu1(Fe), AlSi17Cu5 (EUR DIN no.) Alu-leg over 10% DIN G-AlSi10Mg(Cu), GD-AlSi12 Si / Magnesium EN std. EUR AC-43200, AC-44200, AC-46100, AC Werkstoff No , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) LM9 ADC12, ADC14 AA384, A384.0, A413.2, B

13 Material Material group Standard Material description Copper 18 N/mm2 / <525 Brinell / <155 Alloys EN No. (EUR DIN no.) DIN EN std. EUR CuAg0.1, CuAl10Ni5Fe4, CuAl11Ni6Fe6, CuAl5As, CuFe2P, CuNi10Fe1Mn, CuNi12Zn- 30Pb1, CuNi18Zn19Pb1, CuNi18Zn20, CuNi18Zn27, CuNi1Si, CuNi30Mn1Fe, CuNi3Si, CuNi9Sn2, CuPb1P, CuSn4, CuSn6, CuSn8, CuZn10, CuZn15, CuZn20, CuZn20Al2, CuZn28, CuZn28Sn1, CuZn30, CuZn31Si1, CuZn33, CuZn35Ni2, CuZn35Pb2, CuZn36, CuZn- 36Pb3, CuZn37, CuZn37Pb0.5, CuZn38Pb1.5, CuZn38Sn1, CuZn38SnAl, CuZn39Pb0.5, CuZn39Pb2, CuZn39Pb3, CuZn40, CuZn40Mn1, CuZn40Mn1Pb, CuZn40Pb2, CuZn44Pb2, CuZn5, CW408J, CW451K Cu, CuAg0.1, CuAl10Fe, CuAl10Fe5Ni5, CuAl10Ni, CuAl10Ni5Fe4, CuAl11Ni6Fe5, CuAl5, CuAl5As, CuAl8 Fe3, CuCr, CuFe2P, CuNi1.5Si, CuNi10Fe1Mn, CuNi10Zn45, CuNi12Zn- 30Pb1, CuNi18Zn19Pb, CuNi18Zn19Pb1, CuNi18Zn20, CuNi18Zn27, CuNi20, CuNi25, CuNi30, CuNi30Fe2Mn2, CuNi30FeMn, CuNi30Mn1Fe, CuNi3Si, CuNi44Mn1, CuNi5Fe1Mn, CuNi9Sn2, CuPb10Sn, CuPb15Sn, CuPb1P, CuPb20Sn, CuSn10, CuSn10Zn, CuSn12, CuSn14, CuSn4, CuSn5, CuSn6, CuSn6Zn6, CuSn7, CuSn7ZnPb, CuSn8, CuZn10, CuZn15, CuZn20, CuZn20Al2, CuZn25Al15, CuZn28, CuZn28Sn1, CuZn30, CuZn30AlFeMn, CuZn- 31Si1, CuZn33, CuZn35Al1, CuZn35Ni2, CuZn36, CuZn36Pb1.5, CuZn36Pb3, CuZn37, CuZn37Pb0.5, CuZn38Pb1.5, CuZn38Sn1, CuZn38SnAl, CuZn39AlFeMn, CuZn39Pb0.5, CuZn39Pb2, CuZn39Pb3, CuZn40, CuZn40Al2, CuZn40Mn1, CuZn40Mn1Pb, CuZn40Pb2, CuZn44Pb2, CuZn5 CC331G, CC333G, CC333G-GZ, CC480K, CC483K, CC493K-GZ, CC496K-GZ, CC765S, CW004A, CW013A, CW107C, CW109C, CW112C, CW113C, CW300G, CW307G, CW308G, CW351H, CW352H, CW354H, CW406J, CW408J, CW409J, CW410J, CW450K, CW452K, CW453K, CW500L, CW501L, CW502L, CW503L, CW504L, CW505L, CW506L, CW507L, CW508L, CW509, CW601N, CW602N, CW604N, CW607N, CW610N, CW612N, CW612N, CW614N, CW622N, CW702R, CW706R, CW708R, CW710R, CW713R, CW715R, CW717R, CW720R, CW723R Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) (CuZn38Pb2), CuAl10Fe, CuAl10Ni, CuAl10Ni5Fe5, CuNi10Fe1Mn, CuNi18Zn19Pb1, CuNi18Zn19Pb1, CuNi18Zn20, CuNi25, CuNi30Mn1Fe, CuNi44Mn, CuNi5Fe1Mn, CuSn10, CuSn10Pb10, CuSn12, CuSn14, CuSn4P, CuSn6, CuSn8P, CuZn10, CuZn15, CuZn22Al2, CuZn29Sn1, CuZn30, CuZn30AlFeMn, CuZn30AlFeMn, CuZn35Pb2, CuZn36, CuZn36Pb3, CuZn37, CuZn39Pb0.8, CuZn39Pb2, CuZn39Pb3, CuZn40 AB1, AB2, CA104, CN102, CN105, CN107, CT1, Cu-Ag-4, CZ101, CZ102, CZ103, CZ104, CZ105, CZ106, CZ107, CZ108, CZ109, CZ110, CZ118, CZ119, CZ120, CZ121, CZ123, CZ124, CZ125, CZ128, CZ131, CZ136, HTB1, LB2, NS106, NS107, PB101, PB103, PB104, PB2 CuNi30CuSn7 C2100, C2200, C2300, C2400, C2600, C2680, C2720, C2800, C4430, C5111, C5191, C5210, C6140, C6301, C , 5030, 5112, 5122, 5150, 5165, 5168, 5170, 5217, 5220, 5256, 5272, 5428, 5443, 5458, 5465, 5475, 5640, 5667, 5682, 5710, 5716 C11600, C18400, C19000, C19400, C21000, C22000, C23000, C24000, C25600, C26000, C26800, C27200, C27200, C28000, C33500, C34200, C35300, C36000, C36500, C37700, C37800, C38500, C44300, C46400, C47000, C51000, C51100, C51900, C52100, C60800, C62730, C67410, C68700, C68700, C70250, C70600, C70600, C71300, C71580, C72150, C72500, C75200, C76300, C76300, C77000, C79300, C83600, C86300, C90500, C90700, C91000, C93200, C93700, C93800, C94100, C95200, C95500, C96500 A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 Type 2, A436Type 2b, A

14 Material Material group Standard Material description Fe- based 19 N/mm2 / <1250 Brinell / <210 Superalloys EN No. G-NiCr13Al6MoNb, G-NiCr13Al6MoNb, NiCr19Fe19NbMo, NiFe35Cr14MoTi Nickel / Iron Cobalt based (EUR DIN no.) DIN X2NiCrAITi3220 EN std. EUR , , , Werkstoff No. NC 13 AD, NC 19FeNb, Z8 NCDT 42 AFNOR HR 8, HC 203 (French std.) BS MH-06, MH-16, MH-31 (Britan) UNI N08800, N19909, R30155, S35000, S35500, S45500, S66286 (Italian std) JIS 5660C, 5391A (Japan std.) SS (Swedish std.) A286, AM350, AM355, Custom 455, Discalloy, Incoloy 800, Incoloy 801, Incoloy 909, Lapelloy, M-308, N-155 UNS AA384, (U.N.E. China) AISI/ASTM/SAE A384.0, A413.2, B390.0 (US std.) Ni- Based 21 N/mm2 / <700 Brinell / <210 Superalloys Titanium alloy, nickel based alloy, iron-based alloy EN No. (EUR DIN no.) DIN EN std. EUR N06002, N06007, N06455, N06635, N06985, N10002, N10003, N10004, N10276, N10665, Ni99.6, NiCr15Fe, NiCr19Co18Mo4Ti3Al3, NiCr19Fe19Nb5Mo3, NiCr20Co13Mo4Ti3Al, NiCr20TiAl, NiCr22Mo9Nb, NiFe38Cr16Nb Werkstoff No , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS N02205, N03260, N06600, N06601, N06625, N07001, N07080, N07090, N07263, N07500, (U.N.E. China) N07713, N07718, N07750, N09706, N09901 AISI/ASTM/SAE (US std.) Titanium 22 N/mm2 / <550 Brinell / <160 Ti (pure) Ti (pure) (grd 1-4) Ti 10V-2Fe-3Al Ti 15Mo-3Nb-3Al-0.2Si Ti 17 Ti 2Cu Ti 3Al-2.5V Ti 5Al-2.5Sn Ti 5Al-2.5Sn Ti Ti Ti 6Al-4V IN 100, Inconel 600, Inconel 601, Inconel 625, Inconel 625, Inconel 625, Inconel 706, Inconel 708, Inconel 713, Inconel 713LC, Inconel 718, Inconel 901, Inconel X-750, Mar-M-200, Mar-M-247, Mod. IN 100, Mod. IN 792, Nickel 201, NiCr21Fe18Mo9, NiMo16Cr15W, NiMo16Cr16Ti, NiMo30, NiMo30, Nimonic 101, Nimonic 105, Nimonic 115, Nimonic 263, Nimonic 80A, Nimonic 81, Nimonic 86, Nimonic 90, Nimonic 901, Nimonic 91, René 95, TD Nickel, Udimet 500, Udimet 520, Udimet 700, Udimet 720, Waspalloy EN No. (EUR DIN no.) DIN TiV10Fe2Al3 EN std. EUR TiCu2, TiAl6V4TiAl5Sn2.5 Werkstoff No , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS R58650, R54520, R54521, R54620, R54621, R56260, R56320, R56400, R56401, R58210 (U.N.E. China) AISI/ASTM/SAE (US std.) AMS 4900, -01, -21, AMS 4909, AMS 4910, AMS 4919, AMS 4920, AMS 4920, Grd 5, AMS 4943, AMS 4981, AMS 4986, AMS 4995, ASTM Grade 21 14

15 Material Material group Standard Material description Carbide steel/hss 25 N/mm2 / <1025 Brinell / <340 ELMAX ELMAX IC EMo5V3 SPH 50 SVERKER 3 SVERKER 21 VANADIS 4 VANADIS 4 XTRA SC3 VANADIS 6 VANADIS 6 SC3 VANADIS 10 VANADIS 10 SC3 VANADIS 23 VANADIS 23 SC3 VANADIS 30 VANADIS 30 SC3 VANADIS 60 VANADIS 60 SC3 VANCRON 40 VIDAR SUPREME Hardened steel 28 N/mm2 / <1200 Brinell / <400 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Hardened steel 29 N/mm2 / <1400 Brinell / <450 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Hardened steel 30 N/mm2 / <1250 Brinell / <350 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Graphite Graphite N/mm2 / <85 (quality 20) EN No. HS , HS 6-5-3, X153CrMoV12, X210CrW12 (EUR DIN no.) DIN HS6-5-3, HS6-5-3, X155 CrMoV12-1, X210 CrW 12 EN std. EUR HS , HS 6-5-3, X153CrMoV12, X210CrW12 Werkstoff No , mod, , , , AFNOR X160CrMoV12, Z 160 CDV 12, Z 200 CD 12, Z120WDCV , Z210CW12-01 (French std.) BS BD2, BD6 (Britan) UNI X215CrW121KU, X155CrVMo121KU (Italian std) JIS F5211, F520A, F5213, F5605 (Japan std.) SS 2310, 2312, 2725, 2726, 2727 (Swedish std.) UNS F.5211, F.5213, F520A, F5213, F5605 (U.N.E. China) AISI/ASTM/SAE A48-45B, A532IIIA25%Cr, A532IBniCr-LC, A532IBniCr-HC, 60/40/18, 65/45/12, 80/55/06, (US std.) 32510, A , A , A

16 16

17 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN P-JET Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper 17

18 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN P-JET The P-jet series is an aggressive, highly powerful high-speed end mill well suited for roughing and finishing and 3D milling. TN P-jet is incredibly stable for dynamic milling. Developed for use in all types of material but with excellent characteristics for hardened and stainless steel. Including other hard synthetic materials and titanium. Type: High-speed end mill with double chip-breaking flute for better stability and more room for the chips. This end mill can be made with differentiated flute lengths and chip breakers for better chip flow in the machine. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 4 Helix: 48º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 18

19 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN P-JET P-Jet Short P-Jet Classic 2 10 R0.30 Ø 6h6 Ø 10h P-Jet Long R Ø 10h6 Ø 10h6 19

20 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN P-JET P-Jet Short Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items P-Jet Classic Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items P-Jet Long Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items

21 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN P-JET P-Jet Short Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items P-Jet Classic Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items P-Jet Radius Long Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Weldon Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items

22 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN P-JET Cutting data for materialgroup 1 vc 300 m/min vc 180 m/min vc 150 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 vc 300 m/min vc 180 m/min vc 140 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 vc 250 m/min vc 150 m/min vc 120 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 vc 300 m/min vc 180 m/min vc 150 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 vc 300 m/min vc 180 m/min vc 140 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 vc 200 m/min vc 150 m/min vc 120 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 22

23 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN P-JET Cutting data for materialgroup 7 vc 75 m/min vc 60 m/min vc 40 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 vc 110 m/min vc 90 m/min vc 50 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 vc 70 m/min vc 65 m/min vc 30 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 vc 170 m/min vc 100 m/min vc 80 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.25xd ap. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 vc 110 m/min vc 75 m/min vc 40 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 vc 240 m/min vc 200 m/min vc 160 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 23

24 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN P-JET Cutting data for materialgroup 13 vc 220 m/min vc 180 m/min vc 160 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 vc 170 m/min vc 155 m/min vc120 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 vc 800 m/min vc 750 m/min vc500 m/min ap. 2xd - ae. 1,0xd ap. 2xd - ae. 1,0xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 vc 200 m/min vc 175 m/min vc 140 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 16 vc 800 m/min vc 750 m/min vc500 m/min ap. 2xd - ae. 1,0xd ap. 2xd - ae. 1,0xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 vc 425 m/min vc 375 m/min vc250 m/min ap. 2xd - ae. 1,0xd ap. 2xd - ae. 1,0xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 24

25 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN P-JET Cutting data for materialgroup 19 vc 110 m/min vc 50 m/min vc 40 m/min ap. 2xd - ae. 0,25xd ap. 1xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 vc 110 m/min vc 90 m/min vc 55 m/min ap. 2xd - ae. 0,25xd ap. 1.5xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 vc 120 m/min vc 70 m/min vc 50 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 vc 40 m/min vc 30 m/min vc 20 m/min ap. 2xd - ae. 0,25xd ap. 1.5xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 25 vc 135 m/min vc 80 m/min vc 60 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 vc 100 m/min vc 50 m/min vc 30 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 25

26 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN P-JET Cutting data for materialgroup 30 vc 90 m/min vc 40 m/min vc 20 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 26

27 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened 27

28 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET The E-Jet series is an aggressive, highly powerful high-speed end mill for roughing, finishing and 3D milling. TN E-Jet can be used for basically all materials, but is recommended for cast iron, all types of steel up to HRC69, hard synthetic materials, titanium and inconel. Type: High-speed end mill with double chip-breaking flute for stability and more room for the chips. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 4 Helix: 49º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 28

29 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET E-Jet Classic h6 10 E-Jet Radius R h6 E-Jet Short h6 10 E-Jet Long R h6 2 R h6 29

30 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET E-Jet Classic Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2.0 Ø Ø2.5 Ø Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø7 Ø Ø8 Ø Ø9 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø E-Jet Classic Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8 Ø * Ø9 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø Item no. marked with * is normally not stocked E-Jet Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2.0 Ø Ø2.5 Ø Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø7 Ø Ø8 Ø Ø9 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø E-Jet Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8 Ø Ø9 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø Item no. marked with * is normally not stocked 30

31 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET E-Jet Short Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø Ø3.0 Ø Ø3.5 Ø Ø4.0 Ø Ø4.5 Ø Ø5.0 Ø Ø5.5 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked E-Jet Short Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked 31

32 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN E-JET E-Jet Short Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø Ø3.0 Ø Ø3.5 Ø Ø4.0 Ø Ø4.5 Ø Ø5.0 Ø Ø5.5 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked E-Jet Short Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked E-Jet Long Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Reduceret, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø5 Ø a0.5 L1= Ø6 Ø a0.5 L1= Ø8 Ø a0.5 L1= Ø10 Ø a0.5 L1= Ø12 Ø a0.5 L1= E-Jet Long Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Reduceret, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø5 Ø a0.5 L1= * Ø6 Ø a0.5 L1= * Ø8 Ø a0.5 L1= Ø10 Ø a0.5 L1= Ø12 Ø a0.5 L1= Item no. marked with * is normally not stocked 32

33 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN E-JET Cutting data for materialgroup 1 vc 300 m/min vc 150 m/min vc 140 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 vc 300 m/min vc 135 m/min vc 125 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 vc 250 m/min vc 120 m/min vc 100 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 vc 300 m/min vc 150 m/min vc 140 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 vc 300 m/min vc 130 m/min vc 120 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 vc 200 m/min vc 110 m/min vc 90 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 33

34 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN E-JET Cutting data for materialgroup 7 vc 160 m/min vc 95 m/min vc 75 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 vc 160 m/min vc 90 m/min vc 80 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 vc 120 m/min vc 70 m/min vc 60 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 vc 170 m/min vc 100 m/min vc 90 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 vc 150 m/min vc 80 m/min vc 70 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0,25xd ap. 0,6xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 vc 240 m/min vc 150 m/min vc 130 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 34

35 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN E-JET Cutting data for materialgroup 13 vc 220 m/min vc 140 m/min vc 120 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 vc 180 m/min vc 120 m/min vc95 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 vc 85 m/min vc 55 m/min vc 30 m/min ap. 2xd - ae. 0,25xd ap. 1.5xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 vc 200 m/min vc 130 m/min vc 110 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 19 vc 100 m/min vc 70 m/min vc 35 m/min ap. 2xd - ae. 0,25xd ap. 1xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 vc 150 m/min vc 100 m/min vc 50 m/min ap. 2xd - ae. 0,25xd ap. 1.5xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 35

36 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN E-JET Cutting data for materialgroup 25 vc 135 m/min vc 80 m/min vc 60 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 vc 100 m/min vc 50 m/min vc 30 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 vc 120 m/min vc 70 m/min vc 50 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 30 vc 90 m/min vc 40 m/min vc 20 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 36

37 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET Stainless 37

38 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET The R-Jet series is an aggressive, highly powerful high-speed end mill for roughing, finishing and 3D milling. TN R-Jet is specially developed for use in stainless steel. Type: High-speed end mill with double chip-breaking flute for stability and more room for the chips. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 4 Helix: 49º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 38

39 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET R-Jet Classic h6 10 R-Jet Radius R h6 R-Jet Short h R h6 39

40 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET R-Jet Classic Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2.5 Ø Ø3.0 Ø Ø4.0 Ø Ø5.0 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø R-Jet Classic Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø R-Jet Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2.5 Ø Ø3.0 Ø Ø4.0 Ø Ø5.0 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø R-Jet Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø22 Ø Ø25 Ø Ø32 Ø

41 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET R-Jet Short Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø Ø3.0 Ø Ø3.5 Ø Ø4.0 Ø Ø4.5 Ø Ø5.0 Ø Ø5.5 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked R-Jet Short Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked 41

42 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN R-JET R-Jet Short Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø Ø3.0 Ø Ø3.5 Ø Ø4.0 Ø Ø4.5 Ø Ø5.0 Ø Ø5.5 Ø Ø6.0 Ø Ø8.0 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked R-Jet Short Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø * Ø18 Ø Ø20 Ø Item no. marked with * is normally not stocked 42

43 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN R-JET Cutting data for materialgroup 8 vc 160 m/min vc 110 m/min vc 100 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0.25xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 vc 140 m/min vc 80 m/min vc 70 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0.25xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 vc 150 m/min vc 90 m/min vc 80 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0.25xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 vc 120 m/min vc 70 m/min vc 60 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0.25xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD.) Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 43

44 44

45 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Tiger Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper 45

46 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Tiger The TN Tiger series is a 6-flute high-speed end mill. TN Tiger is a stable, all-round finishing mill that can process just about every kind of material. Type: High-speed end mill for finishing work Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 6 Helix: 45º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling 3D milling All directions 46

47 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Tiger TN Tiger h6 10 TN Tiger Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø16 Ø Ø20 Ø TN Tiger Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø16 Ø Ø20 Ø

48 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Tiger Cutting data for materialgroup 1 vc 210 m/min vc 190 m/min vc 130 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 vc 195 m/min vc 180 m/min vc 120 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 vc 170 m/min vc 150 m/min vc 100 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 vc 210 m/min vc 190 m/min vc 130 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 vc 190 m/min vc 175 m/min vc 115 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 vc 150 m/min vc 130 m/min vc 95 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 48

49 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Tiger Cutting data for materialgroup 7 vc 75 m/min vc 60 m/min vc 40 m/min ap. 0,8xd - ae. 0,25xd ap. 0,8xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 vc 100 m/min vc 90 m/min vc 70 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 vc 65 m/min vc 55 m/min vc 35 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,75xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 vc 170 m/min vc 100 m/min vc 80 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 vc 75 m/min vc 65 m/min vc 40 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,75xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 vc 220 m/min vc 200 m/min vc 160 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 49

50 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Tiger Cutting data for materialgroup 13 vc 200 m/min vc 180 m/min vc 140 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 vc 175 m/min vc 155 m/min vc120 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,75xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 vc 850 m/min vc 750 m/min vc600 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 vc 195 m/min vc 175 m/min vc 140 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,75xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 16 vc 850 m/min vc 750 m/min vc500 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 vc 425 m/min vc 375 m/min vc250 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0,5xd ap. 0,8xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 50

51 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Tiger Cutting data for materialgroup 19 vc 60 m/min vc 50 m/min vc 30 m/min ap. 0,75xd - ae. 0,25xd ap. 0,75xd - ae. 0,25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 vc 110 m/min vc 90 m/min vc 50 m/min ap. 1xd - ae. 0,5xd ap. 1xd - ae. 0.5xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 vc 90 m/min vc 60 m/min vc 40 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 vc 40 m/min vc 30 m/min vc 15 m/min ap. 0,5xd - ae. 0,25xd ap. 0,5xd - ae. 0,25xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 25 vc 90 m/min vc 70 m/min vc 40 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0.25xd ap. 0,5xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 vc 80 m/min vc 50 m/min vc 30 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 51

52 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Tiger Cutting data for materialgroup 30 vc 70 m/min vc 40 m/min vc 20 m/min ap. 1xd - ae. 0,5xd ap. 0.8xd - ae. 0.1xd ap. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Steel: Recommended cooling with compressed air. Stainless Steel: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 52

53 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN H-JET Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened 53

54 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN H-JET The TN H-Jet series is a high-speed end mill whose multiple flutes enable it to create unique workpiece surfaces. Type: High-speed end mill for finishing work Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: Helix: 35º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA Coating: naco Side milling 3D milling All directions 54

55 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN H-JET TN H-Jet R0.5 Ø10h6 TN-H-Jet Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Skær Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø16 Ø Ø20 Ø On request, TN HJet can be modified with customized dimensions. 55

56 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN H-JET Cutting data for materialgroup 1 High-Feed side milling Side milling vc 450 m/min vc 110 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 High-Feed side milling Side milling vc 390 m/min vc 75 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 High-Feed side milling Side milling vc 350 m/min vc 65 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 High-Feed side milling Side milling vc 440 m/min vc 100 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 High-Feed side milling Side milling vc 380 m/min vc 70 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 High-Feed side milling Side milling vc 340 m/min vc 60 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 56

57 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN H-JET Cutting data for materialgroup 7 High-Feed side milling Side milling vc 330 m/min vc 55 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 High-Feed side milling Side milling vc 240 m/min vc 55 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 High-Feed side milling Side milling vc 220 m/min vc 45 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 High-Feed side milling Side milling vc 250 m/min vc 60 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 High-Feed side milling Side milling vc 230 m/min vc 50 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 High-Feed side milling Side milling vc 440 m/min vc 100 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 57

58 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN H-JET Cutting data for materialgroup 13 High-Feed side milling Side milling vc 425 m/min vc 95 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 High-Feed side milling Side milling vc 380 m/min vc 80 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 High-Feed side milling Side milling vc 170 m/min vc 45 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 High-Feed side milling Side milling vc 400 m/min vc 90 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 19 High-Feed side milling Side milling vc 180 m/min vc 50 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 High-Feed side milling Side milling vc 160 m/min vc 40 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 58

59 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN H-JET Cutting data for materialgroup 25 High-Feed side milling Side milling vc 110 m/min vc 20 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 High-Feed side milling Side milling vc 140 m/min vc 25 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 High-Feed side milling Side milling vc 150 m/min vc 30 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 30 High-Feed side milling Side milling vc 125 m/min vc 20 m/min ap. 2xd - ae. 0,1xd ap. 2xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min z , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 59

60 60

61 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-S Steel Cast iron 61

62 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-S The TNX-S series is a roughing end mill best suited for roughing cast iron and steel. Type: Roughing end mill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 3 Helix: 45º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 62

63 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-S TNX-S 70 SL=16 L1= R h6 TNX-S Item no. Dia., mm Shaft h6, mm CL, mm TL, mm L1, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø R Ø8 Ø R Ø10 Ø R Ø12 Ø R Ø14 Ø R Ø16 Ø R Ø20 Ø R TNX-S Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm L1, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø R Ø10 Ø R Ø12 Ø R Ø14 Ø R Ø16 Ø R Ø20 Ø R

64 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TNX-S Cutting data for materialgroup 1 Side milling Slot milling vc 170 m/min vc 140 m/min ap. 2xd - ae. 0,5xd ap. 2xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 Side milling Slot milling vc 160 m/min vc 130 m/min ap. 2xd - ae. 0,5xd ap. 2xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 Side milling Slot milling vc 150 m/min vc 130 m/min ap. 2xd - ae. 0,5xd ap. 0,25xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 Side milling Slot milling vc 165 m/min vc 135 m/min ap. 2xd - ae. 0,5xd ap. 2xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 Side milling Slot milling vc 155 m/min vc 125 m/min ap. 2xd - ae. 0,5xd ap. 2xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 13 Side milling Slot milling vc 140 m/min vc 120 m/min ap. 2xd - ae. 0,5xd ap. 0,25xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion 8-10% (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 64

65 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TNX-S Cutting data for materialgroup 14 Side milling Slot milling vc 130 m/min vc 110 m/min ap. 2xd - ae. 0,5xd ap. 0,25xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 Side milling Slot milling vc 120 m/min vc 95 m/min ap. 2xd - ae. 0,5xd ap. 0,25xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion 8-10% (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 65

66 66

67 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN ME-JET Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper Graphite 67

68 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN ME-JET The TN ME-Jet series is a miniature end mill for both rough milling and finishing. It is available in 2 versions, one for copper and one for steel. TN ME-Jet is ideal for 3D and 5D processing and can be used in just about any material, including copper, graphite and steel. The flute of TN ME-Jet is very strong which enables dry operation dry at correct cutting speeds in steel. Type: High-speed end mill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 2 Helix: 30º Radius tolerance: <±0.01 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 68

69 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN ME-JET ME-Jet for Steel Ø1,9 Ø 2 ME-Jet for Copper Ø1,9 Ø 2 69

70 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN ME-JET ME-Jet for Steel - uncoated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø ME-Jet for Steel - coated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø ME-Jet for copper - uncoated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø ME-Jet for copper - coated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø

71 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN ME-JET Cutting data for materialgroup 1 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 71

72 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN ME-JET Cutting data for materialgroup 7 Finishing milling Rough milling Slot milling vc 290 m/min vc 340 m/min vc 160m/min ap. 0,25xd - ae. 0,03xd ap. 0,45xd - ae. 0,05xd ap. 0,2xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 Finishing milling Rough milling Slot milling vc 120 m/min vc 140 m/min vc 90m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,03xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 Finishing milling Rough milling Slot milling vc 120 m/min vc 140 m/min vc 90m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,03xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 Finishing milling Rough milling Slot milling vc 120 m/min vc 140 m/min vc 90m/min ap. 0,4xd - ae. 0,03xd ap. 0,6xd - ae. 0,03xd ap. 0,1xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 Finishing milling Rough milling Slot milling vc 120 m/min vc 140 m/min vc 90m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,03xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 72

73 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN ME-JET Cutting data for materialgroup 13 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 Finishing milling Rough milling Slot milling vc 310 m/min vc 350 m/min vc 180m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 Finishing milling Rough milling Slot milling vc 450 m/min vc 500 m/min vc 400m/min ap. 0,6xd - ae. 0,07xd ap. 0,75xd - ae. 0,1xd ap. 0,25xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 Finishing milling Rough milling Slot milling vc 350 m/min vc 400 m/min vc 180m/min ap. 0,4xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd ap. 0,32xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 16 Finishing milling Rough milling Slot milling vc 450 m/min vc 500 m/min vc 400m/min ap. 0,6xd - ae. 0,05xd ap. 0,75xd - ae. 0,1xd ap. 0,35xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 Finishing milling Rough milling Slot milling vc 400 m/min vc 450 m/min vc 350m/min ap. 0,6xd - ae. 0,07xd ap. 0,75xd - ae. 0,1xd ap. 0,25xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 73

74 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN ME-JET Cutting data for materialgroup 19 Finishing milling Rough milling Slot milling vc 360 m/min vc 300 m/min vc 180m/min ap. 0,3xd - ae. 0,03xd ap. 0,45xd - ae. 0,05xd ap. 0,2xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 Finishing milling Rough milling Slot milling vc 180 m/min vc 200 m/min vc 120m/min ap. 0,2xd - ae. 0,03xd ap. 0,4xd - ae. 0,05xd ap. 0,35xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 Finishing milling Rough milling Slot milling vc 300 m/min vc 320 m/min vc 160m/min ap. 0,2xd - ae. 0,03xd ap. 0,45xd - ae. 0,05xd ap. 0,1xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 Finishing milling Rough milling Slot milling vc 230 m/min vc 280 m/min vc 160m/min ap. 0,3xd - ae. 0,03xd ap. 0,45xd - ae. 0,05xd ap. 0,2xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 25 Finishing milling Rough milling Slot milling vc 80 m/min vc 100 m/min vc 60m/min ap. 0,2xd - ae. 0,03xd ap. 0,4xd - ae. 0,05xd ap. 0,2xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 Finishing milling Rough milling Slot milling vc 110 m/min vc 130 m/min vc 80m/min ap. 0,15xd - ae. 0,03xd ap. 0,3xd - ae. 0,05xd ap. 0,8xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 74

75 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN ME-JET Cutting data for materialgroup 30 Finishing milling Rough milling Slot milling vc 80 m/min vc 100 m/min vc 50m/min ap. 0,1xd - ae. 0,03xd ap. 0,25xd - ae. 0,05xd ap. 0,05xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for Graphite Finishing milling Rough milling Slot milling vc 400 m/min vc 350m/min ap. 0,5xd - ae. 0,5xd ap. 0,5xd - ae. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 75

76 76

77 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN MC-JET Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper Graphite 77

78 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN MC-JET TN MC-Jet is a series of miniature convex end mills for both rough milling and finishing. It is available in 2 versions, one for copper and one for steel. TN MC-Jet is ideal for 3D and 5D processing and can be used for just about all materials, including copper, graphite and steel. The flute of the TN MC-Jet is very strong which enables dry operation at correct cutting speeds in steel. Type: High-speed convex end mill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 2 Helix: 30º Radius tolerance: <±0.01 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 78

79 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN MC-JET MC-Jet for Steel Ø 2 R 1 Ø1,9 MC-Jet for Copper Ø 2 R 1 Ø1,9 79

80 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN MC-JET MC-Jet for Steel - uncoated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø MC-Jet for Steel - coated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø MC-Jet for copper - uncoated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø MC-Jet for copper - coated Item no. Dia.. mm Shaft h6. mm SL. mm TL. mm l2, mm (d)2, mm Unit price. 1 item Unit price. 5 items Unit price. 10 items Unit price. 20 items Ø 0.4 Ø Ø 0.5 Ø Ø 0.6 Ø Ø 0.8 Ø Ø 1.0 Ø Ø 1.2 Ø Ø 1.5 Ø Ø 2.0 Ø Ø 2.5 Ø Ø 3.0 Ø

81 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN MC-JET Cutting data for materialgroup 1 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 81

82 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN MC-JET Cutting data for materialgroup 7 High Speed Contour milling Contour milling vc 450 m/min vc 320 m/min ap. 0,02xd - ae. 0,02xd ap. 0,45xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 High Speed Contour milling Contour milling vc 450 m/min vc 140 m/min ap. 0,02xd - ae. 0,02xd ap. 0,25xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 High Speed Contour milling Contour milling vc 450 m/min vc 140 m/min ap. 0,02xd - ae. 0,02xd ap. 0,25xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 High Speed Contour milling Contour milling vc 450 m/min vc 140 m/min ap. 0,02xd - ae. 0,02xd ap. 0,3xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 High Speed Contour milling Contour milling vc 450 m/min vc 140 m/min ap. 0,02xd - ae. 0,02xd ap. 0,25xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 82

83 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN MC-JET Cutting data for materialgroup 13 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 High Speed Contour milling Contour milling vc 450 m/min vc 500 m/min ap. 0,04xd - ae. 0,03xd ap. 0,75xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 16 High Speed Contour milling Contour milling vc 450 m/min vc 500 m/min ap. 0,04xd - ae. 0,03xd ap. 0,75xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 High Speed Contour milling Contour milling vc 450 m/min vc 450 m/min ap. 0,04xd - ae. 0,03xd ap. 0,75xd - ae. 0,1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 83

84 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN MC-JET Cutting data for materialgroup 19 High Speed Contour milling Contour milling vc 450 m/min vc 400 m/min ap. 0,02xd - ae. 0,02xd ap. 0,45xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 High Speed Contour milling Contour milling vc 450 m/min vc 200 m/min ap. 0,03xd - ae. 0,02xd ap. 0,6xd - ae. 0,03xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 High Speed Contour milling Contour milling vc 450 m/min vc 320 m/min ap. 0,02xd - ae. 0,02xd ap. 0,45xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 High Speed Contour milling Contour milling vc 450 m/min vc 350 m/min ap. 0,02xd - ae. 0,02xd ap. 0,45xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 25 High Speed Contour milling Contour milling vc 450 m/min vc 150 m/min ap. 0,02xd - ae. 0,02xd ap. 0,3xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 High Speed Contour milling Contour milling vc 450 m/min vc 130 m/min ap. 0,02xd - ae. 0,02xd ap. 0,3xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 84

85 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN MC-JET Cutting data for materialgroup 30 High Speed Contour milling Contour milling vc 450 m/min vc 100 m/min ap. 0,02xd - ae. 0,02xd ap. 0,25xd - ae. 0,05xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for Graphite High Speed Contour milling Contour milling vc 600 m/min vc 400 m/min ap. 0,02xd - ae. 0,02xd ap. 0,5xd - ae. 0,5xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are recommended with the minimum of overhang. Steel: Recommended cooling with mist lubrication (fog of refrigerant). Copper: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 85

86 86

87 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN HFC Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened 87

88 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN HFC The TN-HFC series is a high-feed cutter, as an alternative to convex end mills. HFC is a very strong tool whose high feed rate enables up to a six-fold increase in production time, when processing in moulds or 3D. Type: High-speed end mill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 4 Helix: 7º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco High feed milling 3D milling Pocket milling 88

89 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN HFC TN HFC R2 Ø10h6 TN-HFC Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø4 Ø Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø16 Ø Ø20 Ø On request, TN HFC can be modified with customized dimensions and with weldon. 89

90 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN HFC Cutting data for materialgroup 1 High-Feed side milling Side milling vc 200 m/min vc 110 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 High-Feed side milling Side milling vc 200 m/min vc 100 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 High-Feed side milling Side milling vc 200 m/min vc 90 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 High-Feed side milling Side milling vc 200 m/min vc 110 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 High-Feed side milling Side milling vc 200 m/min vc 100 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 High-Feed side milling Side milling vc 200 m/min vc 90 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (4xD). Steel: Recommended cooling with mist lubrication (fog of refrigerant). Stainless: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 90

91 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN HFC Cutting data for materialgroup 7 High-Feed side milling Side milling vc 200 m/min vc 80 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 High-Feed side milling Side milling vc 155 m/min vc 75 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 High-Feed side milling Side milling vc 145 m/min vc 65 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 High-Feed side milling Side milling vc 155 m/min vc 80 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 High-Feed side milling Side milling vc 145 m/min vc 70 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 High-Feed side milling Side milling vc 200 m/min vc 110 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (4xD). Steel: Recommended cooling with mist lubrication (fog of refrigerant). Stainless: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 91

92 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN HFC Cutting data for materialgroup 13 High-Feed side milling Side milling vc 200 m/min vc 110 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 High-Feed side milling Side milling vc 150 m/min vc 90 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 High-Feed side milling Side milling vc 155 m/min vc 65 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 High-Feed side milling Side milling vc 150 m/min vc 90 m/min ap. 0,25xCR - ae. 1xd ap. 0,25xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 19 High-Feed side milling Side milling vc 155 m/min vc 65 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 High-Feed side milling Side milling vc 150 m/min vc 60 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (4xD). Steel: Recommended cooling with mist lubrication (fog of refrigerant). Stainless: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 92

93 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN HFC Cutting data for materialgroup 25 High-Feed side milling Side milling vc 90 m/min vc 45 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 High-Feed side milling Side milling vc 80 m/min vc 30 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 High-Feed side milling Side milling vc 90 m/min vc 35m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 30 High-Feed side milling Side milling vc70 m/min vc 25 m/min ap. 0,15xCR - ae. 1xd ap. 0,15xCR - ae. 1xd Ø Rpm fz mm/min Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (4xD). Steel: Recommended cooling with mist lubrication (fog of refrigerant). Stainless: Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 93

94 94

95 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN TwinJet Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper 95

96 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN TwinJet The Twin Jet series is a miniature convex end mill for both roughing and finishing. The tools are a 2-flute convex end mill specially designed for 3D processing in hardened steel. The Twin-Jet flute is very strong which enables dry operation at correct cutting speeds. Type: High-speed convex end mill. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 2 Helix: 15º (TwinJet 15) Helix: 45º (TwinJet 45) Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Side milling Pocket milling 3D milling All directions 96

97 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN TwinJet Twin-Jet 15º R5 10h6 Twin-Jet 45º R5 10h6 Twin-Jet 15º Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2 Ø R Ø3 Ø R Ø3 Ø R Ø4 Ø R Ø5 Ø R Ø6 Ø R Ø6 Ø R Ø8 Ø R Ø8 Ø R Ø10 Ø R Ø10 Ø R Ø12 Ø R Ø12 Ø R Twin-jet 45º Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø2 Ø R Ø3 Ø R Ø3 Ø R Ø4 Ø R Ø5 Ø R Ø6 Ø R Ø6 Ø R Ø8 Ø R Ø8 Ø R Ø10 Ø R Ø10 Ø R Ø12 Ø R Ø12 Ø R

98 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN TwinJet Cutting data for materialgroup 1 High Speed Contour milling Contour milling 15º Contour milling 45º vc 310 m/min vc 270 m/min vc 290m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 3 High Speed Contour milling Contour milling 15º Contour milling 45º vc 270 m/min vc 230 m/min vc 250 m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 5 High Speed Contour milling Contour milling 15º Contour milling 45º vc 235 m/min vc 190 m/min vc 215 m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 High Speed Contour milling Contour milling 15º Contour milling 45º vc 310 m/min vc 270 m/min vc 290m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 4 High Speed Contour milling Contour milling 15º Contour milling 45º vc 270 m/min vc 230 m/min vc 250 m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 6 High Speed Contour milling Contour milling 15º Contour milling 45º vc 235 m/min vc 190 m/min vc 215 m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with compressed air. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 98

99 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN TwinJet Cutting data for materialgroup 7 High Speed Contour milling Contour milling 15º Contour milling 45º vc 195 m/min vc 165 m/min vc 185 m/min ap. 0,25xd - ae. 0,1xd ap. 0,25xd - ae. 0,1xd ap. 0,25xd - ae. 0,1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 9 High Speed Contour milling Contour milling 15º Contour milling 45º vc 120 m/min vc 80 m/min vc 100 m/min ap. 0,15xd - ae. 0,2xd ap. 0,15xd - ae. 0,2xd ap. 0,15xd - ae. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 11 High Speed Contour milling Contour milling 15º Contour milling 45º vc 70 m/min vc 50 m/min vc 60 m/min ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 High Speed Contour milling Contour milling 15º Contour milling 45º vc 130 m/min vc 90 m/min vc 110 m/min ap. 0,15xd - ae. 0,2xd ap. 0,15xd - ae. 0,2xd ap. 0,15xd - ae. 0,2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 10 High Speed Contour milling Contour milling 15º Contour milling 45º vc 80 m/min vc 60 m/min vc 70 m/min ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 12 High Speed Contour milling Contour milling 15º Contour milling 45º vc 310 m/min vc 270 m/min vc 290m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with compressed air. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 99

100 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN TwinJet Cutting data for materialgroup 13 High Speed Contour milling Contour milling 15º Contour milling 45º vc 310 m/min vc 270 m/min vc 290m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 15 High Speed Contour milling Contour milling 15º Contour milling 45º vc 270 m/min vc 230 m/min vc 250m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 High Speed Contour milling Contour milling 15º Contour milling 45º vc 600 m/min vc 500m/min ap. 0,1xd - ae. 0,1xd Kan ikke benyttes ap. 0,1xd - ae. 0,1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 High Speed Contour milling Contour milling 15º Contour milling 45º vc 270 m/min vc 230 m/min vc 250m/min ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd ap. 0,25xd - ae. 0,4xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 16 High Speed Contour milling Contour milling 15º Contour milling 45º vc 700 m/min vc 600m/min ap. 0,1xd - ae. 0,1xd Kan ikke benyttes ap. 0,1xd - ae. 0,1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 High Speed Contour milling Contour milling 15º Contour milling 45º vc 320 m/min vc 280 m/min vc300 m/min ap. 0,1xd - ae. 0,1xd ap. 0,1xd - ae. 0,1xd ap. 0,1xd - ae. 0,1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with compressed air. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 100

101 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN TwinJet Cutting data for materialgroup 19 High Speed Contour milling Contour milling 15º Contour milling 45º vc 110 m/min vc 70 m/min vc90 m/min ap. 0,2xd - ae. 0,25xd ap. 0,2xd - ae. 0,25xd ap. 0,2xd - ae. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 22 High Speed Contour milling Contour milling 15º Contour milling 45º vc 110 m/min vc 70 m/min vc90 m/min ap. 0,25xd - ae. 0,35xd ap. 0,25xd - ae. 0,35xd ap. 0,25xd - ae. 0,35xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 28 High Speed Contour milling Contour milling 15º Contour milling 45º vc 350 m/min vc 140 m/min vc 170 m/min ap. 0.02xd - ae. 0.01xd ap. 0.1xd - ae. 0,3xd ap. 0.1xd - ae. 0,3xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 High Speed Contour milling Contour milling 15º Contour milling 45º vc 55 m/min vc 35 m/min vc45 m/min ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 25 High Speed Contour milling Contour milling 15º Contour milling 45º vc 50 m/min vc 30 m/min vc40 m/min ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd ap. 0,1xd - ae. 0,15xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 29 High Speed Contour milling Contour milling 15º Contour milling 45º vc 210 m/min vc 120 m/min vc 140 m/min ap. 0.02xd - ae. 0.01xd ap. 0.07xd - ae. 0,25xd ap. 0.07xd - ae. 0,25xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with compressed air. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 101

102 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN TwinJet Cutting data for materialgroup 30 High Speed Contour milling Contour milling 15º Contour milling 45º vc 130 m/min vc 80 m/min vc 100 m/min ap. 0.01xd - ae. 0.01xd ap. 0.05xd - ae. 0.2xd ap. 0.05xd - ae. 0.2xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with compressed air. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 102

103 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN F-Jet Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper 103

104 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN F-Jet The F-Jet series is a chamfered tool Developed with a 30 degree helix to make the tool incredibly sharp and perfect for chamfering. TN F-Jet can be used in all types of material Type: High-speed chamfered tool. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 3 Helix: 30º Radius tolerance: <±0.02 mm Diameter tolarance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco Chamfering 104

105 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN F-Jet TNF h6 TNF Item no. Dia., mm Shaft h6, mm Z TL, mm Center diam. Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø TNF-F Item no. Dia., mm Shaft h6, mm Z TL, mm Center diam. Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø8 Ø Ø10 Ø Ø12 Ø

106 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN F-Jet Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 1 Cutting data for materialgroup 3 Cutting data for materialgroup 5 Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 Cutting data for materialgroup 4 Cutting data for materialgroup 6 Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 106

107 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN F-Jet Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 200 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 7 Cutting data for materialgroup 9 Cutting data for materialgroup 11 Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 200 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 Cutting data for materialgroup 10 Cutting data for materialgroup 12 Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 107

108 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN F-Jet Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 13 Cutting data for materialgroup 15 Cutting data for materialgroup 17 Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 250 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 Cutting data for materialgroup 16 Cutting data for materialgroup 18 Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 108

109 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN F-Jet Chamfering vc 75 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 100 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 50 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 19 Cutting data for materialgroup 22 Cutting data for materialgroup 28 Chamfering vc 75 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 50 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Chamfering vc 40 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 Cutting data for materialgroup 25 Cutting data for materialgroup 29 Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 109

110 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN F-Jet Chamfering vc 30 m/min ap. 1xd - ae. 0,02xd Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 30 Attention! All cutting data are with overhang three times cutter diameter (3xD). Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 110

111 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN NC-Drill Steel Hardened Steel Stainless Cast iron Nickel/Titanium HSS & Hardened Aluminium Copper 111

112 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN NC-Drill TN NC-Drill is a series of spotting drills Developed with 90º or 120º angle of cutting edge and can also be used for chamfering. TN NC-Drill can be used in all types of material. Type: High-speed spotting drill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 2 Spidsvinkel: 90º & 120º Diameter tolarance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: naco & uncoated Drilling Chamfering 112

113 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN NC-Drill TN NC-Drill TN NC-Drill 90º Item no. Dia., mm Shaft h6, mm Z TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø20 Ø TN NC-Drill 90º Coated Item no. Dia., mm Shaft h6, mm Z TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø20 Ø TN NC-Drill 120º Item no. Dia., mm Shaft h6, mm Z TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø20 Ø TN NC-Drill 120º Coated Item no. Dia., mm Shaft h6, mm Z TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø3 Ø Ø4 Ø Ø5 Ø Ø6 Ø Ø8 Ø Ø10 Ø Ø12 Ø Ø14 Ø Ø16 Ø Ø20 Ø

114 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN NC-Drill Predrilling without cooling vc 80 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 80 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 65 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 1 Cutting data for materialgroup 3 Cutting data for materialgroup 5 Predrilling without cooling vc80 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 80 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 55 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 2 Cutting data for materialgroup 4 Cutting data for materialgroup 6 Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 114

115 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN NC-Drill Predrilling without cooling vc 50 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 25 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 20 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 7 Cutting data for materialgroup 9 Cutting data for materialgroup 11 Predrilling without cooling vc 25 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 20 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 70 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 8 Cutting data for materialgroup 10 Cutting data for materialgroup 12 Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 115

116 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN NC-Drill Predrilling without cooling vc 70 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 70 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 200 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 13 Cutting data for materialgroup 15 Cutting data for materialgroup 17 Predrilling without cooling vc 70 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 200 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 150 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 14 Cutting data for materialgroup 16 Cutting data for materialgroup 18 Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 116

117 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN NC-Drill Predrilling without cooling vc 25 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 40 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 40 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 19 Cutting data for materialgroup 22 Cutting data for materialgroup 28 Predrilling without cooling vc 25 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 40 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Predrilling without cooling vc 30 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 21 Cutting data for materialgroup 25 Cutting data for materialgroup 29 Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 117

118 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN NC-Drill Predrilling without cooling vc 25 m/min Ø Rpm fz mm/min , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 30 Recommended cooling with emulsion (refrigerant). We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 118

119 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet Aluminium Copper 119

120 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet The Alu-Jet series is an aggressive, highly powerful high-speed end mill for roughing, finishing and 3D milling. Alu-Jet can be used for basically any task in soft material but is recommended for plastic, acrylic, brass, copper and aluminium. Type: High-speed end mill with silencing chamfer to reduce cutting noise. Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 2 Helix: 45º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: Supplement with naco Side milling Slot milling Pocket milling Drilling 3D milling All directions 120

121 10 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet Alu-Jet Classic h Alu-Jet Radius R

122 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet Alu-Jet Classic Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø Ø3.0 Ø Ø3.5 Ø Ø4.0 Ø Ø4.5 Ø Ø5.0 Ø Ø5.5 Ø Ø6.0 Ø Ø7.0 Ø Ø8.0 Ø Ø9.0 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø25 Ø Item no. marked with * is normally not stocked Alu-Jet Radius Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø1.0 Ø * Ø1.1 Ø * Ø1.2 Ø * Ø1.3 Ø * Ø1.4 Ø * Ø1.5 Ø * Ø1.6 Ø * Ø1.7 Ø * Ø1.8 Ø * Ø1.9 Ø * Ø2.0 Ø * Ø2.1 Ø * Ø2.2 Ø * Ø2.3 Ø * Ø2.4 Ø * Ø2.5 Ø * Ø2.6 Ø * Ø2.7 Ø * Ø2.8 Ø * Ø2.9 Ø * Ø3.0 Ø > * Ø3.5 Ø > * Ø4.0 Ø > * Ø4.5 Ø > * Ø5.0 Ø > * Ø5.5 Ø > * Ø6.0 Ø > * Ø7.0 Ø > * Ø8.0 Ø > * Ø9.0 Ø > * Ø10 Ø > * Ø11 Ø > * Ø12 Ø > * Ø13 Ø > * Ø14 Ø > * Ø15 Ø > * Ø16 Ø > * Ø18 Ø > * Ø20 Ø > * Ø25 Ø > Item no. marked with * is normally not stocked 122

123 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet Alu-Jet Classic Coated Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Coating Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø1.0 Ø naco * Ø1.1 Ø naco * Ø1.2 Ø naco * Ø1.3 Ø naco * Ø1.4 Ø naco * Ø1.5 Ø naco * Ø1.6 Ø naco * Ø1.7 Ø naco * Ø1.8 Ø naco * Ø1.9 Ø naco * Ø2.0 Ø naco * Ø2.1 Ø naco * Ø2.2 Ø naco * Ø2.3 Ø naco * Ø2.4 Ø naco * Ø2.5 Ø naco * Ø2.6 Ø naco * Ø2.7 Ø naco * Ø2.8 Ø naco * Ø2.9 Ø naco * Ø3.0 Ø naco * Ø3.5 Ø naco * Ø4.0 Ø naco * Ø4.5 Ø naco * Ø5.0 Ø naco * Ø5.5 Ø naco * Ø6.0 Ø naco * Ø7.0 Ø naco * Ø8.0 Ø naco * Ø9.0 Ø naco * Ø10 Ø naco * Ø11 Ø naco * Ø12 Ø naco * Ø13 Ø naco * Ø14 Ø naco * Ø15 Ø naco * Ø16 Ø naco * Ø18 Ø naco * Ø20 Ø naco * Ø25 Ø naco Item no. marked with * is normally not stocked (Additional 1-2 days production time for coating of stocked Alu-Jets) Alu-Jet Radius Coated Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Coating Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø1.0 Ø naco * Ø1.1 Ø naco * Ø1.2 Ø naco * Ø1.3 Ø naco * Ø1.4 Ø naco * Ø1.5 Ø naco * Ø1.6 Ø naco * Ø1.7 Ø naco * Ø1.8 Ø naco * Ø1.9 Ø naco * Ø2.0 Ø naco * Ø2.1 Ø naco * Ø2.2 Ø naco * Ø2.3 Ø naco * Ø2.4 Ø naco * Ø2.5 Ø naco * Ø2.6 Ø naco * Ø2.7 Ø naco * Ø2.8 Ø naco * Ø2.9 Ø naco * Ø3.0 Ø >0.3 naco * Ø3.5 Ø >0.3 naco * Ø4.0 Ø >0.3 naco * Ø4.5 Ø >0.3 naco * Ø5.0 Ø >0.3 naco * Ø5.5 Ø >0.3 naco * Ø6.0 Ø >0.6 naco * Ø7.0 Ø >0.6 naco * Ø8.0 Ø >0.6 naco * Ø9.0 Ø >0.6 naco * Ø10 Ø >0.6 naco * Ø11 Ø >0.6 naco * Ø12 Ø >0.6 naco * Ø13 Ø >0.6 naco * Ø14 Ø >0.6 naco * Ø15 Ø >0.6 naco * Ø16 Ø >0.6 naco Ø18 Ø >0.6 naco * Ø20 Ø >0.6 naco * Ø25 Ø >0.6 naco Item no. marked with * is normally not stocked (Additional 1-2 days production time for coating of stocked Alu-Jets) 123

124 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Alu-Jet Alu-Jet Classic Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8.0 Ø Ø9.0 Ø Ø10 Ø Ø11 Ø Ø12 Ø Ø13 Ø Ø14 Ø Ø15 Ø Ø16 Ø Ø18 Ø Ø20 Ø Ø25 Ø Item no. marked with * is normally not stocked Alu-Jet Radius Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8.0 Ø > * Ø9.0 Ø > * Ø10 Ø > * Ø11 Ø > * Ø12 Ø > * Ø13 Ø > * Ø14 Ø > * Ø15 Ø > * Ø16 Ø > * Ø18 Ø > * Ø20 Ø > * Ø25 Ø > Item no. marked with * is normally not stocked Alu-Jet Classic Coated Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Coating Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8.0 Ø naco * Ø9.0 Ø naco * Ø10 Ø naco * Ø11 Ø naco * Ø12 Ø naco * Ø13 Ø naco * Ø14 Ø naco * Ø15 Ø naco * Ø16 Ø naco * Ø18 Ø naco * Ø20 Ø naco * Ø25 Ø naco Item no. marked with * is normally not stocked (Additional 1-2 days production time for coating of stocked Alu-Jets) Alu-Jet Radius Coated Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Coating Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items * Ø8.0 Ø >0.6 naco * Ø9.0 Ø >0.6 naco * Ø10 Ø >0.6 naco * Ø11 Ø >0.6 naco * Ø12 Ø >0.6 naco * Ø13 Ø >0.6 naco * Ø14 Ø >0.6 naco * Ø15 Ø >0.6 naco * Ø16 Ø >0.6 naco * Ø18 Ø >0.6 naco * Ø20 Ø >0.6 naco * Ø25 Ø >0.6 naco Item no. marked with * is normally not stocked (Additional 1-2 days production time for coating of stocked Alu-Jets) 124

125 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Alu-Jet Cutting data for materialgroup 16 vc 800 m/min vc 750 m/min vc500 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 vc 800 m/min vc 750 m/min vc500 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 vc 425 m/min vc 375 m/min vc250 m/min ap. 2xd - ae. 0,25xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Recommended cooling the emulsion (refrigerant) of 10-12% in order to prevent sticking chips in the flute. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 125

126 126

127 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-A Aluminium Copper 127

128 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-A The TNX-A series is a roughing end mill best suited for roughing in aluminium and other soft materials. Type: High-speed roughing end mill Material: Solid Carbide (submicro grain), K-40/44UF. No. of flutes: 3 Helix: 30º Radius tolerance: <±0.02 mm Diameter tolerance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: None Side milling Slot milling Pocket milling Drilling 3D milling All directions 128

129 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TNX-A TNX-A R1 10h6 TNX-A Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø4 Ø R Ø5 Ø R Ø6 Ø R Ø8 Ø R Ø10 Ø R Ø12 Ø R Ø14 Ø R Ø16 Ø R Ø20 Ø R TNX-A Weldon Item no. Dia., mm Shaft h6, mm CL, mm TL, mm Radius Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø6 Ø R Ø8 Ø R Ø10 Ø R Ø12 Ø R Ø14 Ø R Ø16 Ø R Ø20 Ø R

130 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TNX-A Cutting data for materialgroup 16 vc 1200 m/min vc 850 m/min vc650 m/min ap. 2xd - ae. 0,5xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 17 vc 850 m/min vc 500 m/min vc350 m/min ap. 2xd - ae. 0,5xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cutting data for materialgroup 18 vc 250 m/min vc 180 m/min vc120 m/min ap. 2xd - ae. 0,5xd ap. 2xd - ae. 0,5xd ap. 1xd , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Recommended cooling the emulsion (refrigerant) of 7-12% in order to prevent sticking chips in the flute. When drilling with the TNX-A we advice to use 25% in feed. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 130

131 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Broaches Steel Hardened Steel Stainless Cast iron Nickel/Titanium Aluminium Copper 131

132 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Broaches TN Broaches for making hexagonal holes. For the machining of highly accurate hexagonal holes in seconds during rotation. The rotating broaching tool/reamer is attached to a mandrel holding the tool at a one-degree angle. The mandrel rotates freely in the holder, and the broaching tool is powered by contact with the rotating workpiece that is pressed into each corner of the broach. The pressure is constantly increased to the desired depth. The tool can be used for both right-sided and left-sided operations TN Broaches can be used in all types of material Type: Broaching tool/reamer Material: HSS Kanter: 6 Diameter tolarance: h8 Shaft: Cylindrical DIN 6535 HA/HB Coating: None & naco 132

133 List of net prices 2014/15 All prices are ex works, inclusive of packaging and exclusive of VAT. TN Broaches TN Broaches 28,15 ±0,15 10 NV6 D10 8 TN Broaches Item no. Shaft h6, mm Hexagon, mm TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± TN Broaches - coated Item no. Shaft h6, mm Hexagon, mm TL, mm Unit price, 1 item Unit price, 5 items Unit price, 10 items Unit price, 20 items Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ± Ø D10 28 ±

134 Cutting data 2014/15 All data are calculated according to optimal machinery and material conditions. TN Broaches Cutting data for materialgroup Reaming the hole for hexagonal Feed from 0,050 mm til 0,10 mm pr. revolution (RPM) - Max 2500 Rpm Cutting data for materialgroup 7 Reaming the hole for hexagonal Feed from 0,030 mm til 0,080 mm pr. revolution (RPM) - Max 2000 Rpm Cutting data for materialgroup Reaming the hole for hexagonal Feed from 0,030 mm til 0,080 mm pr. revolution (RPM) - Max 2250 Rpm Cutting data for materialgroup Reaming the hole for hexagonal Feed from 0,050 mm til 0,10 mm pr. revolution (RPM) - Max 2000 Rpm Cutting data for materialgroup Reaming the hole for hexagonal Feed from 0,10 mm til 0,20 mm pr. revolution (RPM) - Max 2250 Rpm Cutting data for materialgroup 18 Reaming the hole for hexagonal Feed from 0,10 mm til 0,20 mm pr. revolution (RPM) - Max 2250 Rpm Cutting data for materialgroup Reaming the hole for hexagonal Feed from 0,030 mm til 0,050 mm pr. revolution (RPM) - Max 2000 Rpm The depth of the drill hole must exceed the depth of the broachers length. There must be sufficient space at the bottom for chips. We are not liable for faults or deficiencies or for modifications of data, cutting-data or prices 134

135 Material Material group Standard Material description Soft steel 1 N/mm2 / <525 Brinell / <120 EN No , , , , , , , , , , (EUR DIN no.) DIN 20 Mn 5, 30 Mn 5, C 10, C 15, C 22, C 25, Ck 10, Ck 15, Ck 22, Ck 25, St 37-2, St 37-3, St 44-2, St 44-3 N EN std. EUR C 10, C 10E, C 15R, C 22E, C22+N, C25+N, G 28 Mn6, S235JR, S235JRG2, S275J0H, S275J2G3 Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) 20 M 5, AF 34 C 10, AF 37 C 12, AF 50 C 30, C 20, E 24-2, E 24-3, E 24-4, E 28-2, E 28-3, E 28-4, XC 10, XC 15, XC 18, XC 25 BS (Britan) 040 A 10, 040 A 22, 045 M 10, 050 A 20, 060 A 25, 070 M 26, 080 M 15, 120 M 19, 120 M 36, C, B, C UNI (Italian std) C 10, C 15, C 16, C 20, C 21, C 25, Fe 360 B, Fe 360 D FF, Fe 430 B FN, Fe 430 D FF, G 22 Mn 3 JIS (Japan std.) S 10 C, S 15 C, S 15 CK, S 20 CK, S 22 C, S 25 C, S 9 CK, SCMn 2, SM 41 B, SM 41 C, SMn 1 H, SMnC 420, STKM 12 C SS 1265, 1311, 1312, 1313, 1350, 1370, 1412, 1414, 1450, (Swedish std.) UNS G10100, G10170, G10200, G10220, G10250, G13300 (U.N.E. China) AISI/ASTM/SAE 1010, 1015, 1022, 1023, 1025, 1330, 1518, A 570 Gr. 40, A 573 Gr. 58, A 573 Gr. 70 (US std.) Soft steel 2 N/mm2 / <700 Brinell / <200 EN No , , , , , , , (EUR DIN no.) DIN 15 S 20, 35 S 20, 46 S 20, 60 S 20, 9 S 20, 9 SMn 28, 9 SMn 36, 9 SMnPb 28, 9 SMnPb 36 EN std. EUR 11 SMn30, 11 SMn37, 11 SMnPb 37, 11 SMnPb30, 15 SMn13, 35 S20, 46 S20, 60 S20 Werkstoff No , , , , , , , , AFNOR 35 MF 4, 45 MF 4, 60 MF 4, S 250, S 250 Pb, S 300, S 300 Pb (French std.) BS 210 A 15, 212 M 36, 212 M 44, 220 M 07, 230 M 07, 240 M 07 (Britan) UNI CF 9 S 22, CF 9 SMn 28, CF 9 SMn 36, CF 9 SMnPb 28, CF 9 SMnPb 36 (Italian std) JIS SUM 21, SUM 22, SUM 22 L, SUM 32 (Japan std.) SS 1912, 1914, 1922, 1926, 1957, 1973 (Swedish std.) UNS G11400, G11460, G12120, G12130, G12134, G12144, G12150 (U.N.E. China) AISI/ASTM/SAE 1140, 1146, 12 L 13, 12 L 14, 1212, 1213, 1215 (US std.) Steel 3 N/mm2 / <600 Brinell / <175 EN No , , , , , , , , (EUR DIN no.) DIN 14 Ni 6, 16 Mo 5, 36 Mn 5, 40 Mn 4, C 30, C 35, C 40, C 45, C 50, Ck 30, Ck 35, Ck 40, Ck 50, Ck 55, St 52-3, St 70-2 EN std. EUR C 30E, C 35E, C 40 E, C 50E, C 55E, C35+N, C40+N, C50+N, E 335, E 360, G 28 Mn6+QT, S355JR Werkstoff No , , , , , , , , , , , , , , , AFNOR (French std.) 16 N 6, 35 M 5, 40 M 5, A 70-2, AF 55 C 35, AF 60 C 40, AF 65 C 45, C 30, C 50, E 36-3, E 36-4, XC 32, XC 38 H1, XC 42 H1, XC 48 H1, XC 55 BS (Britan) 060 A 30, 060 A 35, 070 M 55, 080 A 30, 080 M 36, 080 M 40, 080 M 46, 080 M 50, 150 M 36, , C UNI 14 Ni 6, 16 Mo 5, C 35, C 40, C 45, C 50, Fe 510 B, Fe 510 C, Fe 510 D, Fe 690 (Italian std) JIS SB 450 M, S 30 C, S 35 C, S 40 C, S 45 C, S 50 C, S 55 C, SM 50 YA, SMn 438 (H); SCMn 3 (Japan std.) SS 1550, 1572, 1650, 1655, 2120, 2132, 2172 (Swedish std.) UNS G10340, G10350, G10390, G10430, G13350, G45200 (U.N.E. China) AISI/ASTM/SAE (US std.) 1030, 1035, 1039, 1040, 1045, 1049, 1050, 1055, 1335, 4520, A 350-LF 5 135

136 Material Material group Standard Material description Alloy Steel 4 N/mm2 / <675 Brinell / <150 Formax EC80 ESP65 MoC 201M VC 510 MoC 310M FERMO THG 2000 EN No. (EUR DIN no.) DIN , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Ni 19, 13 Cr 2, 13 CrMo 4 4, 14 MoV 6 3, 14 NiCr 10, 14 NiCr 14, 15 Cr 3, 15 CrMo 5, 15 CrMoV 5 9, 15 CrNi 6, 15 Mo 3, 15 NiCr 14, 16 CrMo 4 4, 16 MnCr 5, 16 MnCrS 5, 18 CrNi 8, 18 CrNiMo 6, 20 CrMo 2, 20 CrMo 5, 20 MnCr 5, 20 MnCrS 5, 20 MoCr 4, 20 MoCrS 4, 21 MnCr 5, 21 NiCrMo 2, 23 CrMoB 3 3, 25 CrMo 4, 25 MoCr 4, 25 MoCrS 4, 28 Cr 4, 28 NiCrMo 4, 30 CrMoV 9, 30 CrNiMo 8, 31 CrMoV 9, 31 NiCr 14, 32 Cr 2, 32 CrMo 12, 34 Cr 4, 34 CrMo 4, 35 CrMo 4, 35 NiCr 18, 36 CrNiMo 4, 36 NiCr 10, 36 NiCr 6, 37 Cr 4, 37 MnSi 4, 38 Cr 2, 38 MnSi 4, 39 CrMoV 13 9, 40 CrMnMo 7, 40 CrMn- MoS 8 6, 40 CrMnNiMo 8, 41 Cr 4, 41 CrMo 4, 42 Cr 4, 42 CrMo 4, 42 CrV 6, 42 MnV 7, 43 CrMo 4, 44 Cr 2, 46 Cr 2, 46 MnSi 4, 48 CrMo 4, 50 CrMo 4, 50 CrV 4, 50 MnSi 4, 53 MnSi 4, 55 Cr 3, 55 Si 7, 58 SiCr 8, 60 SiCr 7, 62 SiMnCr 4, C 45 W, C 55 W, C 60, C 60 W, C 67 W, C 70 W1, C 70 W2, C 80 W2, C 85 W, Ck 45, Ck 60, Ck 67, Ck 75, GS-50 CrV 4, St 60-2, X 10 Cr 13, X 10 CrAl 13, X 10 CrAl 24, X 12 Cr 13, X 12 CrMoS 17, X 12 CrS 13, X 15 Cr 13, X 2 CrMoTi18 2, X 2 CrMoTi18 2, X 2 CrNi 12, X 5 CrNi 13 4, X 5 CrTi 12, X 6 Cr 13, X 6 Cr 17, X 6 CrAl 13, X 6 CrMo 4, X 6 CrTi 17, X 8 CrNb 17 EN std. EUR 13 CrMo 45, 14 NiCr 14, 16 MnCr 5, 16 MnCrS 5, 16 Mo 3, 17 CrNiMo 6, 20 CrMo 5, 20 MnCr 5, 20 MnCrS 5, 20 NiCrMoS 22, 25 CrMo 4, 28 Cr4, 31 CrMoV 9, 34 Cr 4, 34 CrMo 4, 36CrNiMo4+TA, 38 Cr2, 41 Cr 4, 42 CrMo 4, 50 CrV 4, 50 MnSi4, 55 Cr 3, 55 SiCr7, C 45E, C 60E, C 67S, C 75S, C60+N, E 335, X 10 CrAl 13, X 10 CrAl 24, X 12 Cr 13, X 12 CrS 13, X 14 CrMoS 17, X 2 CrMoTi 182, X 2 CrNi 13, X 3 CrNb 17, X 3 CrN- IMo 133, X 5 CrTi 12, X 6 Cr 13, X 6 Cr 17, X 6 CrAl 13, X 6 CrMo 4, X 6 CrTi 17 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Z 18 N 5, 10 NC 12, 12 C 3, 12 CD 4, 12 NC 15, 14 NC 11, 15 CD 3.5, 15 CD 4.5, 15 D 3, 16 MC 5, 16 NC 6, 18 CD 4, 18 NCD 6, 20 MC 5, 20 MnCrS 5, 20 NC 5, 20 NC 6, 20 NCD 2, 25 CD 4 S, 30 CD 12, 30 CND 8, 30 NC 11, 32 C 4, 32 CDV 12, 34 CD 4, 35 CD 4, 35 NC 11, 35 NC 6, 38 C 2, 38 C 4, 40 CMD 8S, 40 CND 8, 40 NCD 3, 42 C 2, 42 C 4, 42 C 4 TS, 42 CD 4, 42 CD 4 TS, 50 CV 4, 55 C 3, 55 S 7, 60 SC 7, A 60-2, CC 55, XC 42, XC 60, XC 68, XC 75, Y1 80, Y3 42, Y3 55, Y3 90, Z 10 C 13, Z 10 CAS 24, Z 10 CF 17, Z 12 C 13, Z 12 CF 13, Z 5 CN 13.4, Z 6 C 12, Z 6 CA 13, Z 6 CT 12, Z 8 C 17, Z 8 CNb 17, Z 8 CT A 67, 060 A 78, 080 A 62, 080 M 46, , Gr. 27, , 1717 CDS 110, 250 A 53, 403 S 17, 405 S 17, 409 S 19, 410 S 21, 416 S 21, 420 S 29, 425 C 11, 430 S 15, 4360-SSC, 4360-SSE, 441 S 29, 523 M 15, 527 A 60, 527 M 17, 530 A 30, 530 A 32, 530 A 36, 530 A 40, 530 M 40, 640 A 35, 653 M 31, 655 M 13, 708 A 37, 708 A 47, 708 M 40, 722 M 24, 735 A 50, 805 M 20, 816 M 40, 820 A 16, 823 M 30, 897 M 39, BH 12, BW 1 B, S CrMo 4, 14 CrMo 4 5, 16 CrNi 4, 16 MnCr 5, 16 Mo 3, 16 NiCr 11, 18 NiCrMo 7, 20 MnCr 5, 20 NiCrMo 2, 25 CrMo 4 (KB), 30 NiCrMo 8, 32 CrMo 12, 34 Cr 4 (KB), 35 CrMo 4, 35 NiCr 9, 36 CrMoV 13 9, 38 Cr 2, 38 Cr 4, 38 NiCrMo 4 (KB), 41 Cr 4, 42 CrMo 4, 45 Cr 2, 51 CrV 4, 55 Cr 3, 55 Si 8, 60 SiCr 8, C 45, C 60, C 70, C 75, C 80 KU, Fe 590; Fe 60-2, X 10 CrAl 12, X 10 CrS 17, X 12 Cr 13, X 12 CrS 13, X 16 Cr 26, X 6 Cr 13, X 6 CrAl 13, X 6 CrNb 17, X 6 CrNi 13 04, X 6 CrTi 12, X 6 CrTi 17, X 8 Cr 17 S 45 C, S 58 C, SCCrM 3, SCM 415 (H), SCM 420, SCM 421, SCM 430, SCM 432, SCM 440, SCM 440 (H), SCM 445 (H), SCR 415, SCr 415 (H), SCR 420 H, SCr 430 (H), SCr 440, SCr 440 (H), SCS 5, SK 3, SK 5, SK 6, SK 7, SM 58, SMnC 21 H, SMnC 420 (H), SNC 22, SNC 415 (H), SNC 815 (H), SNC 836, SNCM 220 (H), SNCM 431, SUH 409, SUH 442, SUP 10, SUP 7, SUP 9 (A), SUS 403, SUS 405, SUS 410, SUS 410 J 1, SUS 416, SUS 430, SUS 430 F, SUS 430 LX 1665, 1672, 1678, 1770, 1774, 1778, 2085, 2090, 2216, 2225, 2230, 2234, 2240, 2244, 2245, 2253, 2301, 2302, 2320, 2326, 2380, 2383, 2385, 2506, 2511, 2912, G33106, G50150, G10420, G10600, G10640, G10700, G10780, G41300, G41350, G41400, G41420, G41470, G51170, G51200, G51320, G51400, G51550, G86170, G98400, H61500, J91201, S40500, S40900, S40977, S41000, S41008, S41500, S41600, S43000, S43020, S43036, S44600, T 51606, T , 1064, 1070, 1078, 1080, 2515, 309, 3135, 3310, 3415, 3435, 403, 405, 409 L, 410, 410 S, 4130, 4135, 4137, 4140, 4142, 4150, 416, 430, 430 F, 430 Nb, 430 Ti, 4320, 444, 446, 5015, 5045, 5115, 5120, 5120 H, 5130, 5132, 5135, 5140, 5155, 6150, 6150H, 8620, 9255, 9262, 9314, 9840, A 182-F11, A 204 Gr. A, A 387 Gr. 12 Cl. 2, A182-F12, CA-15, P 20, P 20+S, P20+Ni, P6 136

137 Material Material group Standard Material description Alloy Steel 5 N/mm2 / <1025 Brinell / <300 Orvar Supreme Orvar 2 Microdized MoCN 315M Grane - Caldie Calmax - Dievar Hotvar QRO90 Supreme Ramax LH Unimax Vidar Supreme EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , , , , , , , , , , DIN 10 CrMo 9 10, 100 Cr 6, 100 MnCrW 4, 100 V 1, 105 WCr 6, 115 CrV 3, 120 WV 4, 14 CrMoV 69, 14 NiCr 18, 21 CrMoV 57, 32 NiCrMo 145, 34 CrAl 6, 34 CrAlMo 5, 34 CrAl- Ni 7, 34 CrAlS 5, 34 CrNiMo 6, 40 NiCrMo 22, 40 NiCrMo 6, 41 CrAlMo 7, 45 WCrV 7, 50 NiCr 13, 58 CrV 4, 60 MnSiCr 4, 60 WCrV 7, 67 SiCr 5, 90 CrSi 5, 90 Mn 4, 90 MnCrV 8, C 105 W1, C 105 W2, C 110 W, C 125 W, C 135 W, C 75 W, C 80 W1, Ck 101, G-X 28 CrMoV 51, G-X 37 CrMoW 51, GS-34 CoCrMoV 1912, X 18 CrN 28, X 19 NiCrMo 4, X 20 Cr 13, X 20 CrMoWV 121, X 20 CrNi 17 2, X 22 CrMoV 121, X 30 Cr 13, X 36 CrMo 17, X 4 CrNiMo 165, X 40 Cr 13, X 45 Cr 13, X 45 CrNiW 189, X 45 NiCrMo 4, X 65 CrMo 14, X 80 CrNiSi 20, X 90 CrMoV 18 EN std. EUR 10 CrMo 910, 100 Cr 6, 105 WCr 6, 107 CrV 3, 14 CrMoV 69, 34 CrAl 6, 34 CrAlNi 7, 34 CrNiMo 6, 41 CrAlMo 710, 90 MnCrV 8, C 100S, C 105U, C 75 W, X 18 CrN 28, X 20 Cr 13, X 20 CrMoWV 121, X 20 CrNi 17 2, X 22 CrMoV 121, X 30 Cr 13, X 38 CrMo 16, X 39 Cr 13, X 4 CrNiMo 165, X 45 Cr 13, X 45 CrNiW 189, X 45 NiCrMo 4, X 70 CrMo 15, X 80 CrNiSi 20, X 90 CrMoV 18 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) 10 CD 9.10, 100 C 3, 100 C 6, 105 WC 13, 110 WC 20, 20 CDV 5.07, 30 CAD 6.12, 34 CAND 7, 35 NCD 14, 35 NCD 6, 40 CAD 6.12, 40 NCD 2, 45 NCD 17, 55 WC 20, 90 MV 8, 90 MWCV 5, Y1 105, Y1 105 V, Y1 80, Y1 90, Y2 120, Y2 140, Z 15 CN 16.02, Z 18 C 25, Z 2 CND 18 05, Z 20 C 13, Z 21 CDV 12, Z 30 C 13, Z 35 CNWS 18.09, Z 35CD17, Z 40 C 14, Z 6 CND , Z 70 D 14, Z 80 CSN (420 S 45), 060 A 96, Gr. 31, 311-Type 6, 311-Type 7, 331 S 40, 409 S 19, 420 S 37, 420 S 45, 431 S 29, 443 S 65, 534 A 99, 817 M 40, 830 M 31, 905 M 31, 905 M 39, BF 1, BO 1, BO 2, BS 1, BW 1A, BW 2, EN 20B 100 Cr 6, 102 V 2 KU, 107 CrV 3 KU, 107 WCr 5 KU, 110 W 4 KU, 12 CrMo 9 10, 34 CrAlMo 7, 35 NiCrMo 6 (KW), 40 NiCrMo 2 (KB), 41 CrAlMo 7, 42 NiCrMo 15 7, 45 WCrV 8 KU, 55 WCrV 8 KU, 90 MnVCr 8 KU, 95 MnWCr 5 KU, C 100 KU, C 120 KU, C 140 KU, C 80 KU, X 16 CrNi 16, X 20 Cr 13, X 30 Cr 13, X 38 CrMo 16 1 KU, X 40 Cr 14, X 45 CrNiW 18 9, X 80 CrSiNi 20, X CrTi 12, X22 CrMoV 12 1 SACM 645, SK 1, SK 2, SK 3, SKS 3, SKS 31, SKS 43, SNCM 240, SNCM 439, SNCM 447, SUH 31, SUH 4, SUJ 2, SUP 4, SUS 420, SUS 420 J 1, SUS 420 J 2, SUS 431, SUS 440 A, SUS 440 B 1870, 1880, 2140, 2218, 2258, 2303, 2304, 2314, 2317, , 2322, 2327, 2387, 2541, 2710, 2940 G10950, G51986, G87400, J 21890, J91153, K 23545, K 23745, K 24065, K 52440, S40280, S42000, S42200, S43100, S44002, S44003, S44600, S65006, T 72302, T31501, T31502, T41901, T61202, T , 420, 422, 431, 4340, 440 A, 440 B, 446, 52100, 6F7, 8740, A 182-F22, A 355 Cl. A, A 355 Cl. D, L2, O1, O2, S1, SAE HNV 3, SAE HNV 6, W 108, W 110, W 112, W 210, W1 137

138 Material Material group Standard Material description Alloy Steel 6 N/mm2 / <400 Brinell / <1025 EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , , , , DIN 54 NiCrMoV 6, 55 NiCrMoV 6, 57 NiCrMoV 7 7, 75 CrMoNiW 6 7, 81 CrMov 42 16, G-X 165 CrCoMo 12, G-X 165 CrMoV 12, G-X 165 CrV 12, S , S , S , S , S , S , S , S , S , S 2-9-1, S 2-9-2, S , S 3-3-2, S 6-5-2, S , S 6-5-3, S 6-5-3C, S , X 100 CrMoV 51, X 105 CrMo 17, X 155 CrVMo 121, X 165 CrMoV 12, X 2 NiCoMoTi , X 210 Cr 12, X 210 CrW 12, X 3 NiCrMo , X 30 WCrV 5 3, X 30 WCrV 9 3, X 32 CrMoCoV 3 3 3, X 32 CrMoV 3 3, X 38 CrMoV 5 1, X 38 CrMoV 5 3, X 40 CrMoV 5 1 EN std. EUR 54 NiCrMoV 6, HS , HS , HS , HS , HS , HS , HS , HS , HS , HS 2-9-1, HS 2-9-2, HS 3-3-2, HS 6-5-2, HS , HS 6-5-3, HS , S-6-5-3C, X 100 CrMoV 5, X 105 CrMo 17, X 155 CrVMo 12 1, X 210 Cr 12, X 40 CrMoV 5 1 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) 55 NCDV 6, 32 DCV 28, 55 NCDV 7, E-Z 2 NKD 18, Z 100 CD 17, Z 100 CDV 5, Z 100 DCWV , Z 110 DKCWV , Z 110 WKCDV , Z 120 WDCV , Z 130 WKCDV , Z 160 CDV 12, Z 2 NKD 19-09, Z 200 C 12, Z 30 WCV 9, Z 32 WCV 5, Z 38 CDV 5, Z 40 CDV 5, Z 80 WCV , Z 80 WKCV , Z 85 DCWV , Z 85 WDCV , Z 85 WDKCV BA 2, BD 2, BD 3, BH 10, BH 11, BH 13, BH 21, BH 224, BM 1, BM 2, BM 34, BM 4, BM 42, BT 1, BT 4, BT 42, BT 5 30 CrMoV KU, HS 1-8-1, HS , HS , HS , HS , HS , HS 2-9-2, HS 3-3-2, HS 6-5-2, HS , HS 6-5-3, HS , X 100 CrMoV 5 1 KU, X 105 CrMo 17, X 155 CrVMo 12 1 KU, X 165 CrMoW 12 KU, X 210 Cr 13 KU, X 215 CrW 12 1 KU, X 30 WCrV 5 3 KU, X 30 WCrV 9 3 KU, X 37 CrMoV 5 1 KU, X 40 CrMo KU SKD 1, SKD 11, SKD 12, SKD 2, SKD 4, SKD 5, SKD 6, SKD 61, SKD 7, SKH 2, SKH 3, SKH 4 A, SKH 51, SKH 52; SKH 53, SKH 53, SKH 55, SKH 57, SKH 9, SKT 4, SUS 440 C 2242, 2260, 2310, 2312, 2722, 2723, 2782, K 93120, S44004, T 11301, T 11302, T11307, T11323, T11323, T11333, T11341, T11342, T12001, T12004, T12005, T12015, T20810, T20811, T20813, T20821, T30102, T30402, T30403, T F2, 18 MAR 300, 440 C, A2, D2, D3, H10, H11, H13, H21, H41, L6, M1, M2, M3, M3 Cl. 2, M33, M34, M35, M41, M42, M7, T1, T15, T4, T5 AISI/ASTM/SAE (US std.) Hardened Steel 7 N/mm2 / <440 Brinell / <1400 MoCN 315M EN No Impax HI Hard (EUR DIN no.) Nimax DIN X 120 Mn 12, HS6-5-3, X155CrMov121, X210CrW12 Toolox 44 EN std. EUR X 120 Mn 12, HS , HS6-5-3, X153CrMov12, X210CrW12 Chipper Werkstoff No , , , , , , , , AFNOR Z 120 M 12 (French std.) BS BW 10 (Britan) UNI SC MnH 1 (Italian std) JIS (Japan std.) SS 2092, , , , , 2183, , , , , (Swedish std.) , , , 2317, , UNS (U.N.E. China) AISI/ASTM/SAE (US std.) A128 Grade A 138

139 Material Material group Standard Material description Stainless N/mm2 / <725 Brinell / <225 EN No , , , , , , , (EUR DIN no.) DIN X 10 CrNiS 18 9, X 12 CrNi 17 7, X 12 CrNi 18 8, X 5 CrNiNb 18 10, X 6 CrNi 18 10, X 6 CrNi 18 11, X 6 CrNi 18 12, X 6 CrNiNb EN std. EUR X 8 CrNiS 18 9, X 9 CrNi 18 8, X 12 CrNi 18 8, X 5 CrNiNb 18 10, X 5 CrNi 18 9, X 6 CrNi 18 11, X 4 CrNi 18 11, X 6 CrNiNb Werkstoff No , , , , , , , AFNOR (French std.) Z 10 CNF 18.09, Z 12 CN 17.07, Z 12 CN 18, Z 6 CN 18.09, Z 6 CN 18.09, Z 6 CNNb 18.10, Z 8 CN FF BS 301 S 21, 302 S 25, 303 S 31, 304 S 31, 304 S 51, 305 S 19, 347 S 31, 347 S 31 (Britan) UNI (Italian std) X 10 CrNi 18 09, X 12 CrNi 17 07, X 5 CrNi KW, X 5 CrNi 18 11, X 6 CrNiNb 18 11, X 6 CrNiNb 18 11, X 7 CrNi JIS SUS 301, SUS 302, SUS 303, SUS 304, SUS 304 H, SUS 305, SUS 347 (Japan std.) SS 2331, 2333, 2338, 2346 (Swedish std.) UNS S30100, S30200, S30300, S30400, S30480, S30500, S34700, S34800 (U.N.E. China) AISI/ASTM/SAE 301, 302, 303, 304, 304 H, 305, 308, 347, 348 (US std.) Stainless N/mm2 / <725 Brinell / <225 EN No. (EUR DIN no.) , , , , , , , , , , , , , DIN X 10 CrNiMoNb 18 12, X 12 CrNi 25 21, X 12 CrNiTi 18 9, X 12 CrNiWTi 16 3, X 15 CrNiSi 20 12, X 2 CrNi 19 11, X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiN 19 11, X 5 CrNiMo , X 6 CrNi 18 9, X 6 CrNiMoNb , X 6 CrNiMoTi EN std. EUR X 5 CrNiMoNb , X 12 CrNi 25 21, X 12 CrNiWTi 16 3, X 15 CrNiSi 20 12, X 2 CrNi 19 11, X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiN 18 10, X 3 CrNiMo , X 5 CrNi 19 10, X 5 CrNiMo , X 6 CrNiMoNb , X 6 CrNiMoTi , X 6 CrNiTi Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) Z 12 CN 25.20, Z 17 CNS 20.12, Z 2 CN Az, Z 2 CN 18.10, Z 2 CND , Z 2 CND 17.13, Z 2 CND , Z 6 CN 18.10M, Z 6 CND , Z 6 CNDNb 17.12, Z 6 CNDNb 17.13, Z 6 CNDT 17.12, Z 6 CNNb 18.10, Z 6 CNT C 15, 304 S 12, 304 S 62, 309 S 24, 310 S24, 316 S 11, 316 S 12, 316 S 33, 317 S 12, 318 C 17, 318 S 17, 320 S 31, 321 S 51 X 2 CrNiMo , X 2 CrNiMo , X 2 CrNiMo 18 16, X 2 CrNiN 18 11, X 3 Cr Ni 18 11, X 5 CrNiMo , X 6 CrNi 26 20, X 6 CrNiMoNb 17 12, X 6 CrNiMoNb 17 13, X 6 CrNiMoTi 17 12, X 6 CrNiTi SCS 13, SCS 16, SCS 22, SUH 309, SUH 310, SUS 304 L, SUS 304 LN, SUS 310 S, SUS 316, SUS 316 L, SUS 316 Ti, SUS 317 L, SUS , 2337, 2343, 2348, 2350, 2352, 2353, 2361, 2367, 2371 JIS (Japan std.) SS (Swedish std.) UNS S31603, S30403, S30453, S30900, S31008, S31600, S31603, S31640, S31703, S32100, S34700 (U.N.E. China) AISI/ASTM/SAE 304 L, 304 LN, 309, 310 S, 316, 316 Cb, 316 L, 316 Ti, 317 L, 318, 321, 321 H, 347 H, CF8 (US std.) 139

140 Material Material group Standard Material description Stainless N/mm2 / <725 Brinell / <225 EN No , (EUR DIN no.) DIN X 15 CrNiSi 25 20, X 5 CrNiMo EN std. EUR X 15 CrNiSi 25 20, X 5 CrNiMo Werkstoff No , AFNOR Z 15 CNS 25.20, Z 3 CND (French std.) BS 314 S 25, 316 S 31 (Britan) UNI X 16 CrNiSi 25 20, X 5 CrNiMo (Italian std) JIS SUH 310, SUS 316 (Japan std.) SS 2347 (Swedish std.) UNS S31000, S31600 (U.N.E. China) AISI/ASTM/SAE 310, 314, 316 (US std.) Stainless N/mm2 / <1250 Brinell / <365 EN No. (EUR DIN no.) , , , , , , , , , , , , , , , , , , DIN X 1 CrNiMoN , X 1 NiCrMoCuN , X 10 NiCrAlTi 32 20, X 12 NiCrSi 36 16, X 2 CrMoNiCuN , X 2 CrNiMoCuWN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiN 23 4, X 2 NiCrMoCu , X 2 NiCrMoCu , X 4 CrNiCuNb 16 4, X 4 CrNiMo , X 5 CrNiCuNb 17 4 EN std. EUR X 1 CrNiMoN , X 1 CrNiMoN , X 1 NiCrMoCu , X 1 NiCrMoCuN , X 10 NiCrAlTi 32 20, X 12 NiCrSi 35 16, X 2 CrMoNiCuN , X 2 CrNi- MoCuWN25 7 4, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 2 CrNiMoN , X 2 CrNiN 23 4, X 2 NiCrMoCu , X 3 CrNiMo , X 4 CrNiCuNb 16 4, X 5 CrNiCuNb 16 4 Werkstoff No , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Incoloy 800, Z 2 CND Az, Z 2 CND Az, Z 2 CND Az, Z 2 NCDU 25 20, Z 20 NCS 33.16, Z 3 CND Az, Z 3 CND Az, Z 3 CND Az, Z 3 CND 25.7 Az, Z 4 CNUNb 16.4 M, Z 6 CNU S 61, 316 S 62, 316 S 63, 318 S 13, 332 S 15, 904 S 13, NA 17, X 1 CrNiMoN , Z 10 NC X 1 CrNiMoN , X 2 CrNiMoN 17 12, X 2 CrNiMoN , X 2 CrNiMoN 22 5, X 2 CrNiMoN , X 3 CrNiMo NCF 800, SCS 24, SUH 330, SUS 316 LN, SUS 329 J 1, SUS 329 J 3L, SUS , 2327, 2328, 2375, 2377, 2562, 2564, 2778 N08028, N08330, N08800, N08904, S 31653, S15500, S17400, S31254, S31653, S31803, S32205, S32304, S32550, S32654, S32750, S32760, S , 316 LN, 318, 329, 329 LN, 330, 630, 904L, CN7M, F 53, F 55, XM

141 Material Material group Standard Material description Cast iron 12 N/mm2 / <675 Brinell / <225 EN No , , , , , , , (EUR DIN no.) DIN GG-10, GG-15, GGG-35.3, GGG-40, GGG-40.3, GTS-35-10, GTS-45-06, GTS EN std. EUR EN-GJL-100, EN-GJL-150, EN-GJS , EN-GJS , EN-GJS , EN- GJMB , EN-GJMB-450-6, EN-GJMB Werkstoff No , , , , AFNOR Ft 10 D, Ft 15 D, FGS , FGS , FGS , B 340/12, P 440/7, P 540/5 (French std.) BS (Britan) Grade 100, Grade 150, Grade 350/22, Grade 420/12, Grade 370/17, B 340/12, P 440/7, P 540/5 UNI G10, G15, GS , GSO 42/17, B 35-12, P 45-06, P (Italian std) JIS FC 100, FC 150, FCD L, FCD L, FCMB35-10, PCMP45-06, PCMP55-04 (Japan std.) SS , , , , , , , (Swedish std.) UNS F11401, F11601, F32800, F32800, F22200, F23130, F24130 (U.N.E. China) AISI/ASTM/SAE A18 20 B, A48 25 B, , , A , A , A (US std.) Cast iron 13 N/mm2 / <600 Brinell / <175 EN No , , , , , , , , , (EUR DIN no.) DIN GG-20, GG-25, GGG-50, GGG-60, GGG-NiCr 20 2, GGG-NiCr 20 3, GGG-NiMn 13 7, GGL-NiCr 20 2, GGL-NiCr 20 3, GTS EN std. EUR EN-GJL-200, EN-GJL-250, EN-GJS-500-7, EN-GJS-600-3, EN-GJSA-XNiCr20-2, EN-GJ- SA-XNiCr20-3, EN-GJSA-XNiMn13-7, EN-GJLA-XNiCr 20-2, EN-GJLA-XNiCr20-3, EN- GJMB Werkstoff No , , , , , , , , AFNOR (French std.) Ft 20 D, Ft 25 D, FGS 500-7, FGS 600-3, FGS Ni20 Cr2, FGS Ni20 Cr3, FGS Ni13 Mn7, FGL Ni20 Cr2, FGL Ni20 Cr3, P 570/3 BS (Britan) Grade 220, Grade 260, Grade 500/7, Grade 600/3, Grade S2, Grade S2B, Grade S6, Grade F2, P 570/3 UNI G20, G25, GS 500-7, GS 600-3, P (Italian std) JIS FC 200, FC 250, FCD 500-7, FCD 600-3, PCMP60-03 (Japan std.) SS , , , , , , (Swedish std.) UNS F12101, F12401, F33800, F34100, F43000, F43001, F41002, F41003, F24830 (U.N.E. China) AISI/ASTM/SAE (US std.) A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 Type 2, A436Type 2b, A Cast iron 14 N/mm2 / <750 Brinell / <200 EN No , , , , (EUR DIN no.) DIN GG-30, GGG-70, GGL-NiCuCr , GGL-NiCuCr , GTS EN std. EUR EN-GJL-300, EN-GJS-700-2, EN-GJLA-XNiCuCr15-6-2, EN-GJLA-XNiCuCr15-6-3, EN- GJMB Werkstoff No , , , AFNOR Ft 30 D, FGS 700-2, FGL Ni15 Cu6 Cr2, FGL Ni15 Cu6 Cr3, P 690/2 (French std.) BS Grade 300, Grade 700/2, Grade F1, P 690/2 (Britan) UNI G30, GS 700-2, P (Italian std) JIS FC 300, FCD 700-2, PCMP70-02 (Japan std.) SS , , (Swedish std.) UNS F13101, F34800, F41000, F41001, F26230 (U.N.E. China) AISI/ASTM/SAE (US std.) A48 45 B, A , A436 Type 1, A436 Type 1b, A

142 Material Material group Standard Material description Cast iron 15 N/mm2 / <1020 Brinell / <300 EN No. (EUR DIN no.) , , , , , , , , , , , , , DIN GG-35, GG-40, GGG-80, GGG-Ni 22, GGG-Ni 35, GGG-NiCr 30 1, GGG-NiCr 30 3, GGG- NiCr 35 3, GGG-NiMn 23 4, GGG-NiSiCr , GGG-NiSiCr , GGL-NiCr 30 3, GGL-NiSiCr , GGL-NiSiCr EN std. EUR EN-GJL-350, EN-GJS-800-2, EN-GJSA-XNi22, EN-GJSA-XNi35, EN-GJSA-XNiCr30-3, EN-GJSA-XNiCr35-3, EN-GJSA-XNiMn23-4, EN-GJSA-XNiSiCr20-5-2, EN-GJSA-XNiSi- Cr30-5-5, EN-GJLA-XNiCr 30-3, EN-GJLA-XNiSiCr Werkstoff No , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) Ft 35 D, Fgl 400, FGS 800-2, FGS Ni22, FGS Ni35, FGS Ni30 Cr1, FGS Ni30 Cr3, FGS Ni35 Cr3, FGS Ni23 Mn4, FGS Ni20 Si5 Cr2, FGS Ni30 Si5 Cr5, FGL Ni30 Cr3, FGL Ni20 Si5 Cr3, FGL Ni30 Si5 Cr5 Grade 350, Grade 400, Grade S3, Grade S2M, Grade F3 G35, GS FC 350, FCD , F13502, F14102, F36200, F41004, F43003, F43004, F43005, F43006, F43007, F43010 A48 50 B, A B, A , A439 Type D-2B, A439 Type D-5, A436 Type D-3A, A436 Type D-3, A436 Type D-5B, A439 Type D-2M, Nicrosilal Spheronic, A439 Type D-4, A436 Type 3, Nicrosilal, A436 Type D-4 142

143 Material Material group Standard Material description Aluminium 16 N/mm2 / <525 Brinell / <160 Alloys low Si Alu-leg les 10% Si/ Magnesium EN No. (EUR DIN no.) DIN EN std. EUR Al99, Al99.5, Al99.7, Al99.8, AlCu4Ti, AlCu4TiMg, AlCuBiPb, AlCuMg1, AlCuSiMn, AlMg1, AlMg1SiCu, AlMg2.5, AlMg2.7Mn, AlMg2Mn0.3, AlMg2Mn0.8, AlMg3, AlMg3, AlMg4.5Mn, AlMg4Mn, AlMg5, AlMg5(Si), AlMg9, AlMgSi0.5, AlMgSi0.7, AlMgSi1, AlMn0.5Mg0.5, AlMn0.5Mg0.5, AlMn1, AlMn1Cu, AlMn1Mg1, AlSi10Mg(Fe), AlSi6Cu4, AlSi7Mg, AlSi8Cu3(Si), AlSi9Mg, AlZn4.5Mg1, MgAl3Zn, MgAl6Mn, MgAl6Zn, MgAl8Zn, MgAl8Zn1, MgAl9Zn1, MgSe3Zn2Zr1 Al99, Al99.5, Al99.7, Al99.8, AlCu2.5Mg0.5, AlCuBiPb, AlCuMg1, AlCuMg2, AlCuSiMn, AlMg1, AlMg1.5, AlMg1SiCu, AlMg2.5, AlMg2.7Mn, AlMg2Mn0.3, AlMg2Mn0.8, AlMg3, AlMg4.5, AlMg4.5Mn, AlMg4Mn, AlMgSi0.5, AlMgSi0.7, AlMgSi1, AlMgSiPb, AlMn0.5Mg0.5, AlMn0.5Mg0.5, AlMn1, AlMn1Cu, AlMn1Mg1, AlZn4.5Mg1, AlZnMgCu0.5, AlZnMgCu1.5, G-AlCu4Ti, G-AlCu4TiMg, G-AlMg3, G-AlMg3Si, G-AlMg5, G-AlMg5, G-AlMg9, G-AlSi10Mg, G-AlSi5Mg, G-AlSi6Cu4, G-AlSi7Mg, G-AlSi8Cu3, G-AlSi9Mg, G-MgAg3Se2Zr1, G-MgAl3Zn, G-MgAl6Mn, G-MgAl6Zn, G-MgAl8Zn, G-MgAl8Zn1, G-MgAl9Zn1, G-MgMn2, G-Mg- Se3Zn2Zr1, G-MgTh3Zn2Zr1 AC-21000, AC-21100, AC-42000, AC-42100, AC-43200, AC-43400, AC-45000, AC-46200, AC-51100, AC-51200, AC-51400,, AW-1050A, AW-1070, AW-1080, AW-1200, AW-2011, AW-2014, AW-2024, AW-3003, AW-3004, AW-3005, AW-3103, AW-3105, AW-5005A, AW- 5049, AW-5052, AW-5083, AW-5086, AW-5251, AW-5454, AW-5754, AW-6060, AW-6061, AW-6063, AW-6082, AW-7020, AW-7075, MB 65110, MC 21110, MC 21120, MC 21230, MG-P-61, MG-P-62, MG-P-63 Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) (6061), A-4/1200, A-5/1050A, A-7/1070, A-8/1080, A-G0.6, A-G1.5, A-G2.5C/5052, A-G2.5MC/5454, A-G2M, A-G2Mn0.8, A-G3M, A-G3T, A-G4.5MC, A-G4MC/5086, A-GS/6060, A-GSUC/6061, A-M1/3003, A-M1G/3004, A-MG0.5/3005, A-S10G, A-S10G, A-S7G, A-S7GO3, A-SGM0.7/6082, A-SGPb, A-U2G, A-U4G/2024, A-U4G1, A-U4SG/2014, A-U5GT, A-U5PbBi/2011, A-Z4GU, A-Z5G/7020, A-Z5GU/7075, G-A3-Z1, G-A6-Z1, G-A9, G-A92, G-M2, ZRE1 (H10), (H9)/(6060), (N4), (N5/6), 1A, 1B/1050A, 1C/1200, 2L69, 2L91/92, 2L95/96, 2L97/98, 2L99, A82, FC1/2011, H14, H15/2014, H17/7020, H20, H30/6082, LM25, LM5, LM9, MAG-E-101, MAG-E-111, MAG-E-121, MAG1-M, MAG3, MAG6-TE, N3/3103, N31, N4 /5251, N41/5005, N51/5454, N8/5083 (A1050), (A6063, A1200, A2011, A2017, A3003, A5052, A5082, A5454, A6061, A7075 UNI (Italian std) JIS 4004, 4005, 4007, 4010, 4054, 4103, 4104, 4106, 4107, 4115, 4120, 4125, 4140, 4163, 4212, (Japan std.) 4244, 4245, 4251, 4253, 4337, 4338, 4355, 4425, 4633, 4635, 4637 SS A02040, A05140, A13560, A13600, AA1050A, AA1070A, AA1080A, AA1200, AA2011, (Swedish std.) AA2014, AA2017A, AA2024, AA2117, AA3003, AA3004, AA3005, AA3103, AA3105, AA5005A, AA5049, AA5050B, AA5052, AA5082, AA5083, AA5086, AA5251, AA5454, AA5754, AA6005, AA6012, AA6060, AA6061, AA6082, AA7020, AA7022, AA7075, AM60A, AZ31B, AZ61A, AZ80A, AZ81A, AZ91A/B, B80, M1A UNS 204, 359,2, 4418, 4437, 4442, 5056A, 5140, A380, B26, B85 (U.N.E. China) AISI/ASTM/SAE A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 (US std.) Type 2, A436Type 2b, A Aluminium 17 N/mm2 / <450 Brinell / <135 Alloys High Si EN No. AlSi10Mg(Cu), AlSi12, AlSi11Cu2(Fe), AlSi12Cu1(Fe), AlSi17Cu5 (EUR DIN no.) Alu-leg over 10% DIN G-AlSi10Mg(Cu), GD-AlSi12 Si / Magnesium EN std. EUR AC-43200, AC-44200, AC-46100, AC Werkstoff No , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) LM9 ADC12, ADC14 AA384, A384.0, A413.2, B

144 Material Material group Standard Material description Copper 18 N/mm2 / <525 Brinell / <155 Alloys EN No. (EUR DIN no.) DIN EN std. EUR CuAg0.1, CuAl10Ni5Fe4, CuAl11Ni6Fe6, CuAl5As, CuFe2P, CuNi10Fe1Mn, CuNi12Zn- 30Pb1, CuNi18Zn19Pb1, CuNi18Zn20, CuNi18Zn27, CuNi1Si, CuNi30Mn1Fe, CuNi3Si, CuNi9Sn2, CuPb1P, CuSn4, CuSn6, CuSn8, CuZn10, CuZn15, CuZn20, CuZn20Al2, CuZn28, CuZn28Sn1, CuZn30, CuZn31Si1, CuZn33, CuZn35Ni2, CuZn35Pb2, CuZn36, CuZn- 36Pb3, CuZn37, CuZn37Pb0.5, CuZn38Pb1.5, CuZn38Sn1, CuZn38SnAl, CuZn39Pb0.5, CuZn39Pb2, CuZn39Pb3, CuZn40, CuZn40Mn1, CuZn40Mn1Pb, CuZn40Pb2, CuZn44Pb2, CuZn5, CW408J, CW451K Cu, CuAg0.1, CuAl10Fe, CuAl10Fe5Ni5, CuAl10Ni, CuAl10Ni5Fe4, CuAl11Ni6Fe5, CuAl5, CuAl5As, CuAl8 Fe3, CuCr, CuFe2P, CuNi1.5Si, CuNi10Fe1Mn, CuNi10Zn45, CuNi12Zn- 30Pb1, CuNi18Zn19Pb, CuNi18Zn19Pb1, CuNi18Zn20, CuNi18Zn27, CuNi20, CuNi25, CuNi30, CuNi30Fe2Mn2, CuNi30FeMn, CuNi30Mn1Fe, CuNi3Si, CuNi44Mn1, CuNi5Fe1Mn, CuNi9Sn2, CuPb10Sn, CuPb15Sn, CuPb1P, CuPb20Sn, CuSn10, CuSn10Zn, CuSn12, CuSn14, CuSn4, CuSn5, CuSn6, CuSn6Zn6, CuSn7, CuSn7ZnPb, CuSn8, CuZn10, CuZn15, CuZn20, CuZn20Al2, CuZn25Al15, CuZn28, CuZn28Sn1, CuZn30, CuZn30AlFeMn, CuZn- 31Si1, CuZn33, CuZn35Al1, CuZn35Ni2, CuZn36, CuZn36Pb1.5, CuZn36Pb3, CuZn37, CuZn37Pb0.5, CuZn38Pb1.5, CuZn38Sn1, CuZn38SnAl, CuZn39AlFeMn, CuZn39Pb0.5, CuZn39Pb2, CuZn39Pb3, CuZn40, CuZn40Al2, CuZn40Mn1, CuZn40Mn1Pb, CuZn40Pb2, CuZn44Pb2, CuZn5 CC331G, CC333G, CC333G-GZ, CC480K, CC483K, CC493K-GZ, CC496K-GZ, CC765S, CW004A, CW013A, CW107C, CW109C, CW112C, CW113C, CW300G, CW307G, CW308G, CW351H, CW352H, CW354H, CW406J, CW408J, CW409J, CW410J, CW450K, CW452K, CW453K, CW500L, CW501L, CW502L, CW503L, CW504L, CW505L, CW506L, CW507L, CW508L, CW509, CW601N, CW602N, CW604N, CW607N, CW610N, CW612N, CW612N, CW614N, CW622N, CW702R, CW706R, CW708R, CW710R, CW713R, CW715R, CW717R, CW720R, CW723R Werkstoff No , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS (U.N.E. China) AISI/ASTM/SAE (US std.) (CuZn38Pb2), CuAl10Fe, CuAl10Ni, CuAl10Ni5Fe5, CuNi10Fe1Mn, CuNi18Zn19Pb1, CuNi18Zn19Pb1, CuNi18Zn20, CuNi25, CuNi30Mn1Fe, CuNi44Mn, CuNi5Fe1Mn, CuSn10, CuSn10Pb10, CuSn12, CuSn14, CuSn4P, CuSn6, CuSn8P, CuZn10, CuZn15, CuZn22Al2, CuZn29Sn1, CuZn30, CuZn30AlFeMn, CuZn30AlFeMn, CuZn35Pb2, CuZn36, CuZn36Pb3, CuZn37, CuZn39Pb0.8, CuZn39Pb2, CuZn39Pb3, CuZn40 AB1, AB2, CA104, CN102, CN105, CN107, CT1, Cu-Ag-4, CZ101, CZ102, CZ103, CZ104, CZ105, CZ106, CZ107, CZ108, CZ109, CZ110, CZ118, CZ119, CZ120, CZ121, CZ123, CZ124, CZ125, CZ128, CZ131, CZ136, HTB1, LB2, NS106, NS107, PB101, PB103, PB104, PB2 CuNi30CuSn7 C2100, C2200, C2300, C2400, C2600, C2680, C2720, C2800, C4430, C5111, C5191, C5210, C6140, C6301, C , 5030, 5112, 5122, 5150, 5165, 5168, 5170, 5217, 5220, 5256, 5272, 5428, 5443, 5458, 5465, 5475, 5640, 5667, 5682, 5710, 5716 C11600, C18400, C19000, C19400, C21000, C22000, C23000, C24000, C25600, C26000, C26800, C27200, C27200, C28000, C33500, C34200, C35300, C36000, C36500, C37700, C37800, C38500, C44300, C46400, C47000, C51000, C51100, C51900, C52100, C60800, C62730, C67410, C68700, C68700, C70250, C70600, C70600, C71300, C71580, C72150, C72500, C75200, C76300, C76300, C77000, C79300, C83600, C86300, C90500, C90700, C91000, C93200, C93700, C93800, C94100, C95200, C95500, C96500 A48 30 B, A48 35 B, A , A , A436 Type D-2, A436 Type D-2B, A436 Type 2, A436Type 2b, A

145 Material Material group Standard Material description Fe- based 19 N/mm2 / <1250 Brinell / <210 Superalloys EN No. G-NiCr13Al6MoNb, G-NiCr13Al6MoNb, NiCr19Fe19NbMo, NiFe35Cr14MoTi Nickel / Iron Cobalt based (EUR DIN no.) DIN X2NiCrAITi3220 EN std. EUR , , , Werkstoff No. NC 13 AD, NC 19FeNb, Z8 NCDT 42 AFNOR HR 8, HC 203 (French std.) BS MH-06, MH-16, MH-31 (Britan) UNI N08800, N19909, R30155, S35000, S35500, S45500, S66286 (Italian std) JIS 5660C, 5391A (Japan std.) SS (Swedish std.) A286, AM350, AM355, Custom 455, Discalloy, Incoloy 800, Incoloy 801, Incoloy 909, Lapelloy, M-308, N-155 UNS AA384, (U.N.E. China) AISI/ASTM/SAE A384.0, A413.2, B390.0 (US std.) Ni- Based 21 N/mm2 / <700 Brinell / <210 Superalloys Titanium alloy, nickel based alloy, iron-based alloy EN No. (EUR DIN no.) DIN EN std. EUR N06002, N06007, N06455, N06635, N06985, N10002, N10003, N10004, N10276, N10665, Ni99.6, NiCr15Fe, NiCr19Co18Mo4Ti3Al3, NiCr19Fe19Nb5Mo3, NiCr20Co13Mo4Ti3Al, NiCr20TiAl, NiCr22Mo9Nb, NiFe38Cr16Nb Werkstoff No , , , , , , , , , , , , , , , , , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS N02205, N03260, N06600, N06601, N06625, N07001, N07080, N07090, N07263, N07500, (U.N.E. China) N07713, N07718, N07750, N09706, N09901 AISI/ASTM/SAE (US std.) Titanium 22 N/mm2 / <550 Brinell / <160 Ti (pure) Ti (pure) (grd 1-4) Ti 10V-2Fe-3Al Ti 15Mo-3Nb-3Al-0.2Si Ti 17 Ti 2Cu Ti 3Al-2.5V Ti 5Al-2.5Sn Ti 5Al-2.5Sn Ti Ti Ti 6Al-4V IN 100, Inconel 600, Inconel 601, Inconel 625, Inconel 625, Inconel 625, Inconel 706, Inconel 708, Inconel 713, Inconel 713LC, Inconel 718, Inconel 901, Inconel X-750, Mar-M-200, Mar-M-247, Mod. IN 100, Mod. IN 792, Nickel 201, NiCr21Fe18Mo9, NiMo16Cr15W, NiMo16Cr16Ti, NiMo30, NiMo30, Nimonic 101, Nimonic 105, Nimonic 115, Nimonic 263, Nimonic 80A, Nimonic 81, Nimonic 86, Nimonic 90, Nimonic 901, Nimonic 91, René 95, TD Nickel, Udimet 500, Udimet 520, Udimet 700, Udimet 720, Waspalloy EN No. (EUR DIN no.) DIN TiV10Fe2Al3 EN std. EUR TiCu2, TiAl6V4TiAl5Sn2.5 Werkstoff No , , AFNOR (French std.) BS (Britan) UNI (Italian std) JIS (Japan std.) SS (Swedish std.) UNS R58650, R54520, R54521, R54620, R54621, R56260, R56320, R56400, R56401, R58210 (U.N.E. China) AISI/ASTM/SAE (US std.) AMS 4900, -01, -21, AMS 4909, AMS 4910, AMS 4919, AMS 4920, AMS 4920, Grd 5, AMS 4943, AMS 4981, AMS 4986, AMS 4995, ASTM Grade

146 Material Material group Standard Material description Carbide steel/hss 25 N/mm2 / <1025 Brinell / <340 ELMAX ELMAX IC EMo5V3 SPH 50 SVERKER 3 SVERKER 21 VANADIS 4 VANADIS 4 XTRA SC3 VANADIS 6 VANADIS 6 SC3 VANADIS 10 VANADIS 10 SC3 VANADIS 23 VANADIS 23 SC3 VANADIS 30 VANADIS 30 SC3 VANADIS 60 VANADIS 60 SC3 VANCRON 40 VIDAR SUPREME Hardened steel 28 N/mm2 / <1200 Brinell / <400 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Hardened steel 29 N/mm2 / <1400 Brinell / <450 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Hardened steel 30 N/mm2 / <1250 Brinell / <350 HRC EN No. (EUR DIN no.) DIN EN std. EUR Werkstoff No. AFNOR BS UNI JIS SS UNS AISI/ASTM/SAE Graphite Graphite N/mm2 / <85 (quality 20) EN No. HS , HS 6-5-3, X153CrMoV12, X210CrW12 (EUR DIN no.) DIN HS6-5-3, HS6-5-3, X155 CrMoV12-1, X210 CrW 12 EN std. EUR HS , HS 6-5-3, X153CrMoV12, X210CrW12 Werkstoff No , mod, , , , AFNOR X160CrMoV12, Z 160 CDV 12, Z 200 CD 12, Z120WDCV , Z210CW12-01 (French std.) BS BD2, BD6 (Britan) UNI X215CrW121KU, X155CrVMo121KU (Italian std) JIS F5211, F520A, F5213, F5605 (Japan std.) SS 2310, 2312, 2725, 2726, 2727 (Swedish std.) UNS F.5211, F.5213, F520A, F5213, F5605 (U.N.E. China) AISI/ASTM/SAE A48-45B, A532IIIA25%Cr, A532IBniCr-LC, A532IBniCr-HC, 60/40/18, 65/45/12, 80/55/06, (US std.) 32510, A , A , A

147 Salgs- og Leveringsbetingelser General: These Terms and Conditions of Sale and Delivery apply to all offers, confirmations of order and purveyances, unless another written agreement covering this exists between the Parties. Offer; confirmation of order: TN s offers are valid for three (3) months, unless otherwise agreed in writing. The final agreement for delivery will not be available until the Buyer receives TN s written confirmation of order and only this confirmation of order is binding. Prices: All prices are specified on TN s price list in effect from time to time or on the confirmation of order issued. All prices are specified exclusive of carriage, packaging, VAT, taxes and any handling charges. TN is continuously entitled to implement price changes without notice on price lists and offers, unless otherwise agreed in writing. Payment: The purchase sum falls due for payment not later than the date specified on the invoice as the final date of timely payment. The terms of payment are net cash, unless otherwise explicitly specified. If a final date of payment is not specified, payment falls due upon delivery. If the Buyer fails to pay on time, TN is entitled to withhold all further deliveries to the Buyer, regardless of whether the deliveries are mutually interrelated. For payment received after the due date, interest of 2% will be charged per month or any part thereof on the outstanding amount due, inclusive of VAT pursuant to the Danish Interest Act, unless a different interest rate applies according to usual practice or has been agreed. Interest on overdue payment falls due for payment immediately and is to be paid prior to all other debt by means of regular payments. In the event payment is overdue, TN is entitled without notice to refer the matter to a lawyer for collection. The Buyer is under an obligation to pay the expenses of collection set by the lawyer, which may exceed the sums specified in the Danish Executive Order on Extrajudicial Collection Charges, relating to overdue payment (Order on extrajudicial collection costs in the event of late payment). Termination and modification of orders: After submitting an order, the Buyer does not have the right to modify or terminate the order. In the event that TN separately approves termination or modification, the Buyer is under an obligation to pay the costs relating to the termination or modification. Return of tools: The return of tools is not accepted. If it is nevertheless agreed that TN is to accept the return of a tool, this tool must be unused. Approved returns are credited after deducting the charge set by TN to cover the costs of return. Drawings: All drawings, estimates, descriptions and other material sent in conjunction with the submission of offers or deliveries remain the property of TN and may not be duplicated without the written consent of TN, nor may they be presented to a Third Party or be used as the basis for carrying out work. Drawings made by TN for use in the submission of an offer shall be returned on demand. Delivery: The date of delivery specified in the confirmation of order is solely a guideline for TN, unless otherwise agreed in writing. Delivery is ex TN s warehouse unless otherwise agreed, whereby the Buyer bears the risk of accidents affecting the goods after delivery from the warehouse. Complaints: Once the Buyer has received the tool, the Buyer is under an obligation to inspect the tool immediately and without undue delay. Complaints of deficiencies shall be filed within eight (8) days after the tool has been dispatched from TN s warehouse. Deficiencies which could have been discovered during such an inspection may not be cited subsequently. Unless otherwise agreed, TN grants a twenty-four (24) month guarantee calculated from the delivery date. TN s guarantee obligations are limited to deficiencies due to faults in materials or production and which arise under working conditions and correct use stipulated in the agreement. The guarantee obligation does not cover deficiencies such as inadequate maintenance or incorrect assembly by the Buyer which is at variance with TN s instructions nor does it cover modifications carried out without the written approval of TN. TN s obligations do not cover damage resulting from unusual use or overload, nor do they cover normal wear and tear or deterioration. TN may demand that the Buyer return the tool enclosing a description of the deficiency. TN is free to choose whether to replace the tool, regrind the tool or modify the tool. Product liability: For damage and/or injury caused by defects in the product delivered inflicted on persons or objects, TN may only be held liable if it can be proven that the damage/injury is due to an error or neglect committed by TN. Under no circumstances may TN be held liable for simple negligence and the Buyer has the burden of proof if the Buyer wishes to cite that TN has committed gross negligence. Under no circumstances may TN be held liable for operating loss, loss of profit, lost earnings or other indirect loss. For commercial property damage, TN s liability for product damage is limited to a maximum of DKK 10 multiplied by the price of the tool which caused the damage. In instances where TN is liable for product damage, but where the loss is also attributable to an error committed by the Buyer, liability will be apportioned according to the degree of guilt manifested. To the extent that TN may be held liable for product damage vis-à-vis a third party, the Buyer is under an obligation to indemnify TN for any liability which could be imposed on TN and which is more extensive than TN s liability. The Buyer is under an obligation to allow legal proceedings be initiated against the Buyer before the same court which is hearing a claim for damages against TN arising from the tools delivered. TN may demand to be informed of the Buyer s product liability insurance. The Buyer is under an obligation to notify TN immediately in the event a claim of product liability is filed against the Buyer concerning TN s products. Force Majeure: In the event that delivery, punctual delivery or delivery conforming to contract is prevented or delayed by events which are beyond TN s control and which include but are not limited to labour conflict, interruption of operation, transportation difficulties or other failure by a third party or similar, TN may delay delivery without liability or terminate the order in whole or in part at TN s own discretion by notifying the Buyer as soon as possible. Choice of applicable law; venue: Any dispute between the Parties shall be settled in accordance with Danish law and before the court in TN s legal venue, unless TN chooses that the dispute shall be resolved by means of arbitration. If TN chooses arbitration, The Danish Institute of Arbitration and the rules currently in effect shall apply. These terms and conditions of sale and delivery apply from 1 October

148 ISO9001 & ISO14001 Certification TN is certified to ISO9001 and ISO We did this to uphold our position as one of the world s leading manufacturers of cutting tools. We do not want to comprise on the quality or uniformity of our products. Quality and uniformity: As part of the ISO certification processes, all manufacturing procedures were written into the quality management system, containing specifications and formalisations of all processes associated with them. At the same time, our system contains a wide variety of check-lists and data forms to ensure the consistent high quality of our work. The quality system also aims to ensure that we constantly develop and improve our own processes and procedures, as well as our development procedures and products. Our quality system guarantees our customers products of highest quality as well as unwavering professional service on our part. Traceability: This means that all our products are traceable in every single production process. If an error occurs, traceability enables us to generate a fault report that concludes where the fault occurred and what caused it. In the event of a manufacturing fault, we are also able to trace other tools that could be defective. Environment: At TN, we take account of the environment. We have the equipment required for filtering out grinding slurry/dust emitted by the production process. All slurry and residue is sorted out and properly sent to be recycled in accordance with strict environmental guidelines. The same applies to the rest of TN s product handling where waste is sorted to ensure a high level of recycling.. TN has been certified at Bureau Veritas with: ISO 9001:2008 Cert no.: (DNKFRC A) ISO 14001:2004 Cert no.: (DK ) 148

149 Standard tools, optimisation and regrinding. Use the right tools to streamline your production process Most machining shops know exactly how much can be saved by choosing the right tools and not least the cutting data for them. TN gladly advises customers about any optimisation processes that could improve their production time and not least increase the durability of their tools. When a tool is worn out, many will get rid of the tool or send it abroad to be reground. Proper regrinding and finishing can make a tool like new once again. TN regrinds its own standard product range, specialised tools and most other tool brands at reasonable prices. TN also offers to coat tools at its own coating centre, with a turnaround of 1 2 workdays. In addition, TN can also polish/grind tools both before and after the coating process to improve chip flow and smooth the surface to extend the tool s service life even more. 149

150 Specialised tools At TN, we specialise in developing and manufacturing specialised tools. Step drills Step mills Profile mills Thread mills Hob mills Engravers And many more besides... Our long-standing optimisation experience and know-how have taught us that streamlining a production process can reduce production time and especially costs. In some instances, having the right specialised tool can replace several other tools and not least processing procedures, as well as replace tools in the machine. This will be reflected in reduced production time, tool consumption and costs, which will quickly and obviously impact your bottom line. This is not very expensive and our specially developed tendering system enables you to quickly receive the right price and time of delivery for such tools. Contact TN to let us see how we can optimise your production process together. Phone us on tel or send an to info@tnslib.dk - The following pages show examples of products manufactured for our customers over the years. 150

151 Specialised tools, examples This picture shows tools delivered by TN for the production of the workpieces shown: They include standard and specialised tools. 151

152 Specialised tools, examples This picture shows tools delivered by TN for the production of the workpieces shown: They include standard and specialised tools. 152

153 Specialised tools, examples This picture shows tools delivered by TN for the production of the workpieces shown: They include standard and specialised tools. 153

154 154

155 155

156 Since 1987, TN has specialised its activities in the manufacture and regrinding of specialised and standard Solid Carbide tools. TN has a big team of high-qualified employees, all of whom are highly skilled in our field. We are constantly developing, updating and widening our range of CNC-controlled machinery to maintain our leading technological position and ensure our ability to deliver top quality in a modern setting. We are located in the centre of Zealand, only a 30-minute drive from Copenhagen and the island of Funen. TN also offers to coat products at its own coating centre and completes the process within 1 2 working days. In addition, TN can also polish/grind tools both before and after the coating to improve chip flow and smooth the surface to extend the tool s service life. TN is certified to ISO9001 and ISO Welcome to TN