Genuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style
|
|
|
- Austen Alexander
- 5 years ago
- Views:
Transcription
1 Genuine Metaris Gear Product Technical Catalog Pumps & Components - MH Series Bearing & Bushing Style
2 MH365 Series Bushing Pump Features Metaris Bushing Pumps & Motors are available in 4 models with many of the same available options as Metaris Bearing Pumps. With ductile iron housings, these pumps offer pressure ratings as high as 3500 psi for the most demanding of applications. Heavy Duty Sleeve Bushing Design Dowelled and Rugged Cast Iron Construction Pressure Balanced Wear Plates Working Pressure up to 3500 psi Multiple Bearing Carrier Options NPT & SAE Port Options High Strength Steel Gear & Shaft Sets Specifications MH365 DISPLACEMENT MAX PRESSURE GEAR WIDTH IN³/REV (CM³/REV) PSI BAR.07 3/4" 2.70 (44.3) 3500 (241) " 3.60 (59.0) 3500 (241) /4" 4.50 (73.8) 3500 (241) /2" 5.40 (88.5) 3500 (241) /4" 6.30 (103.3) 3500 (241) " 7.20 (118.0) 3500 (241) /4" 8.10 (132.8) 3250 (224) /2" 9.00 (147.5) 3000 (207) Hydraulex Global 147
3 MH365 Series Bushing Pump Pump Performance Data SPEED RPM GEAR WIDTH (GPM/LPM) 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 343 Motor Performance Data GEAR WIDTH SPEED RPM 1" (3500 PSI) 1-1/4" (3500 PSI) 1-1/2" (3500 PSI) 1-3/4" (3500 PSI) 2" (3500 PSI) 2-1/4" (3250 PSI) 2-1/2" (3000 PSI) A B A B A B A B A B A B A B / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Note: Input 2500psi Output 175 bar MH365 PL Chart A: Input Flow - GPM / LPM B: Output Torque - In/Lbs. / Nm SHAFT STYLE INTEGRAL TWO PIECE SAE "BB" Spline 7,750 7,750 SAE "BB" Keyed 5,550 5,550 SAE "B" Spline 3,050 3,050 SAE "B" Keyed 3,700 3,700 SAE "C" Spline 14,900 11,950 SAE "C" Keyed 10,800 10,800 Connecting Shaft 11,950 Values based on using anti-wear type petroleum oil 150 SUS at 100 F (ISO rating of 32 cst at 38 C) and 0 psi inlet pressure. 148 Hydraulex Global
4 MH365 Series Bushing Pump Model Code Breakdown Repeat for Tandem Units MHP A BL - AB AU - * - * - * Type 1 MHP = Pump MHM = Motor Unit 2 A = Single Unit B = Tandem Unit C = Single or Tandem Unit w/ a Continental Shaft L = Unit w/ Extended Studs Shaft End Cover 3 1 = Pump w/o Shaft Bearing (Clockwise Rotation) 2 = Pump w/o Shaft Bearing (Counter-clockwise Rotation) 4 = Pump w/ Shaft Bearing (Clockwise Rotation) 5 = Pump w/ Shaft Bearing (Counter-clockwise Rotation) 8 = Motor w/ Shaft Bearing (Bi-Rotational) 9 = Motor w/o Shaft Bearing (Bi-Rotational) Shaft End Cover 4 42 = SAE 4-Bolt "B" Mount 78 = SAE 4-Bolt "C" Mount 97 = SAE 2-Bolt "B" Mount 98 = SAE 2-Bolt "C" Mount Port End Cover 5 Unported BI None None Side Ported - SAE O-ring C FB BF 1-1/2" 1-1/4" FC CF 1-1/2" 1" FG GF 1-1/4" 1-1/4" FJ JF 1-1/4" 1" FL LF 1" 1" BC CB 1-1/2" None BG GB 1-1/4" None BJ JB 1" None BL LB None 1-1/4" BN NB None 1" Side Ported - SAE Split Flange C EC CE 2" 1-1/2" EF FE 2" 1-1/4" EG GE 2" 1" EH HE 1-1/2" 1-1/2" EJ JE 1-1/2" 1-1/4" EK KE 1-1/2" 1" EL LE 1-1/4" 1-1/4" EM ME 1-1/4" 1" EN NE 1" 1" OE EO 2" None OF FO 1-1/2" None OG GO 1-1/4" None OJ JO 1" None OL LO None 1-1/2" OM MO None 1-1/4" ON NO None 1" Connecting Shaft 10 For connecting tandem units 1 = Connecting Shaft - Multiple Units Bearing Carriers 9 See following page for Bearing Carrier options Shaft Type 8 07 = SAE "C" 14 Tooth Spline Dia. 11 = SAE "C" Keyed Dia. 5/16" x 15/32" x 1-1/2" Key Gear Size 7 Code / Displacement (in³/r) 07 (2.70) 17 (6.30) 10 (3.60) 20 (7.20) 12 (4.50) 22 (8.10) Gear Housing 6 Code 15 (5.40) 25 (9.00) AB None None Pump EB None None Motor Motor - Side Ported - SAE O-ring VC 1-1/4" 1-1/4" VN 1" 1" VR 3/4" 3/4" Motor - Side Ported - SAE Split Flange CR 1-1/2" 1-1/2" CS 1-1/4" 1-1/4" CT 1" 1" CV 3/4" 3/4" Hydraulex Global 149
5 MH365 Series Bushing Pump Model Code Breakdown Cont. Bearing Carriers 9 Dual Outlet Pumps SAE Split Flange C Out AC CA 2-1/2" 1-1/2" 1-1/2" AD DA 2-1/2" 1-1/2" 1-1/4" AE EA 2-1/2" 1-1/2" 1" AF FA 2-1/2" 1-1/4" 1-1/4" AG GA 2-1/2" 1-1/4" 1" AH HA 2-1/2" 1" 1" AM MA 2" 1-1/4" 1-1/4" AN NA 2" 1-1/4" 1" AP PA 2" 1" 1" AT TA 1-1/2" 1-1/4" 1-1/4" AU UA 1-1/2" 1-1/4" 1" AV VA 1-1/2" 1" 1" AW WA 1-1/4" 1-1/4" 1-1/4" AX XA 1-1/4" 1-1/4" 1" AY YA 1-1/4" 1" 1" AZ ZA 1" 1" 1" Dual Outlet Pumps SAE O-ring C Out GJ JG 2" 1-1/2" 1-1/2" GK KG 2" 1-1/2" 1-1/4" GL LG 2" 1-1/2" 1" GM MG 2" 1-1/4" 1-1/4" GN NG 2" 1-1/4" 1" GP PG 2" 1" 1" GT TG 1-1/2" 1-1/4" 1-1/4" GU UG 1-1/2" 1-1/4" 1" GV VG 1-1/2" 1" 1" GW WG 1-1/4" 1-1/4" 1-1/4" GX XG 1-1/4" 1-1/4" 1" GY YG 1-1/4" 1" 1" GZ ZG 1" 1" 1" Single Outlet Pumps SAE Split Flange C CJ JC 2-1/2" 1-1/2" CL LC 2-1/2" 1-1/4" CM MC 2-1/2" 1" HB BH 2" 1-1/2" HC CH 2" 1-1/4" HF FH 2" 1" HL LH 1-1/2" 1-1/2" HM MH 1-1/2" 1-1/4" HN NH 1-1/2" 1" HO OH 1-1/4" 1-1/4" HP PH 1-1/4" 1" HQ QH 1" 1" Single Outlet Pumps SAE O-ring C KB BK 2" 1-1/2" KC CK 2" 1-1/4" KF FK 2" 1" KL LK 1-1/2" 1-1/2" KM MK 1-1/2" 1-1/4" KN NK 1-1/2" 1" KO OK 1-1/4" 1-1/4" KP PK 1-1/4" 1" KQ QK 1" 1" Combined Outlet Pumps SAE Split Flange C UC CU 2-1/2" 1-1/2" UF FU 2-1/2" 1-1/4" UN NU 2" 1-1/2" UO OU 2" 1-1/4" UP PU 1-1/2" 1-1/2" UQ QU 1-1/2" 1-1/4" UR RU 1-1/4" 1-1/4" Combined Outlet Motors SAE Split Flange Combined Outlet Pumps SAE O-ring C AA 2" 2" BB 1-1/2" 1-1/2" CC 1-1/4" 1-1/4" EE 1" 1" FF 3/4" 3/4" PE EP 2" 1-1/2" PM MP 2" 1-1/4" PN NP 1-1/2" 1-1/2" PQ QP 1-1/2" 1-1/4" PR RP 1-1/4" 1-1/4" Combined Outlet Motors SAE O-ring MM 1-1/2" 1-1/2" NN 1-1/4" 1-1/4" QQ 1" 1" RR 3/4" 3/4" 150 Hydraulex Global
6 MH365 Series Parts Breakdown Hydraulex Global 151
7 MH365 Series Parts Breakdown DRAWING NO. DESCRIPTION METARIS # ALTERNATE # 1 SHAFT BRG. SNAP RING X a INPUT SHAFT BRG. X b SEAL RETAINER & SPACER IN PLACE OF SHAFT BRG. A SEAL RETAINER FOR MOTORS ONLY A a PUMP LIP SEAL X b MOTOR LIP SEAL X a 4 BOLT B MOUNT PUMP S.E.C. WITHOUT BUSHING TYPE 42 (4" or mm pilot) A b 4 BOLT B MOUNT PUMP S.E.C. WITH BUSHING TYPE 42 (4" or mm pilot) A c 4 BOLT C MOUNT PUMP S.E.C. WITHOUT BUSHING TYPE 78 (5" or 127 mm pilot) A d 4 BOLT C MOUNT PUMP S.E.C. WITH BUSHING TYPE 78 (5" or 127 mm pilot) A e 2 BOLT B MOUNT PUMP S.E.C. WITHOUT BUSHING TYPE 97 (4" or mm pilot) A f 2 BOLT B MOUNT PUMP S.E.C. WITH BUSHING TYPE 97 (4" or mm pilot) A g 2 BOLT C MOUNT PUMP S.E.C. WITHOUT BUSHING TYPE 98 (5" or 127 mm pilot) A h 2 BOLT C MOUNT PUMP S.E.C. WITH BUSHING TYPE 98 (5" or 127 mm pilot) A i 4 BOLT B MOUNT MOTOR S.E.C. WITHOUT BUSHING TYPE 42 (4" or mm pilot) A j 4 BOLT B MOUNT MOTOR S.E.C. WITH BUSHING TYPE 42 (4" or mm pilot) A k 4 BOLT C MOUNT MOTOR S.E.C. WITHOUT BUSHING TYPE 78 (5" or 127 mm pilot) A l 4 BOLT C MOUNT MOTOR S.E.C. WITH BUSHING TYPE 78 (5" or 127 mm pilot) A m 2 BOLT B MOUNT MOTOR S.E.C. WITHOUT BUSHING TYPE 97 (4" or mm pilot) A n 2 BOLT B MOUNT MOTOR S.E.C. WITH BUSHING TYPE 97 (4" or mm pilot) A o 2 BOLT C MOUNT MOTOR S.E.C. WITHOUT BUSHING TYPE 98 (5" or 127 mm pilot) A p 2 BOLT C MOUNT MOTOR S.E.C. WITH BUSHING TYPE 98 (5" or 127 mm pilot) A a CHECK VALVE MOTOR ( Not required on all models ) A b PRESSURE PLUG PUMP ( Not required on all models ) X BUSHING X PUMP BUNA SEAL A PUMP NYLON BACKUP SEAL A Not Shown MOTOR NYLON BACKUP SEAL A Not Shown MOTOR THRUST PLATE SIDE SEAL A Not Shown MOTOR THRUST PLATE END SEAL A a PUMP THRUST PLATE A b MOTOR THRUST PLATE A a SHAFT & GEAR 14 TOOTH SPLINE 1.228" maj. dia. TYPE 7 A36-50-XX XX b SHAFT & GEAR 1.250" KEYED (5/16") TYPE 11 A36-50-XX XX c SHAFT & GEAR SET 13 TOOTH SPLINE 0.858" maj. dia TYPE 25 A36-50-XX XX a PUMP HOUSING GASKET X b MOTOR HOUSING GASKET X Hydraulex Global
8 MH365 Series Parts Breakdown DRAWING NO. DESCRIPTION METARIS # ALTERNATE # 13a PUMP HOUSING DOWEL PIN A b MOTOR HOUSING DOWEL PIN A a PUMP GEAR HOUSING A36-33-XX XX b MOTOR GEAR HOUSING A36-32-XX XX a 365 BEARING CARRIER 1 OUTLET WITHOUT BUSHING A b 365 BEARING CARRIER 1 OUTLET WITH BUSHING A c 365 BEARING CARRIER 2 OUTLET WITHOUT BUSHING A d 365 BEARING CARRIER 2 OUTLET WITH BUSHING A e 365 MOTOR BEARING CARRIER BLANK WITHOUT BUSHING A f 365 MOTOR BEARING CARRIER BLANK WITH BUSHING A g 365/330 BEARING CARRIER WITHOUT BUSHING A h 365/330 BEARING CARRIER WITH BUSHING A i 365/330 BEARING CARRIER C WITHOUT BUSHING A j 365/330 BEARING CARRIER C WITH BUSHING A a CONNECTING SHAFT A b PIGGYBACK CONNECTING SHAFT 365/330 A GEAR SET ONLY A36-50-XX XX a 365 PUMP PORT END COVER WITHOUT BUSHING NO PORTING A b 365 PUMP PORT END COVER WITH BUSHING NO PORTING A c 365 PUMP PORT END COVER WITHOUT BUSHING PORTING TYPE A d 365 PUMP PORT END COVER WITH BUSHING PORTING TYPE A e 365 MOTOR PORT END COVER WITHOUT BUSHING NO PORTING A f 365 MOTOR PORT END COVER WITH BUSHING NO PORTING A g 365 MOTOR PORT END COVER WITHOUT BUSHING PORTING TYPE A h 365 MOTOR PORT END COVER WITH BUSHING PORTING TYPE A i 365 P.E.C. TO S.A.E. "A" PILOT WITHOUT BUSHING A j 365 P.E.C. TO S.A.E. "A" PILOT WITH BUSHING A k 365 P.E.C. TO S.A.E. "A" PILOT C WITHOUT BUSHING A l 365 P.E.C. TO S.A.E. "A" PILOT C WITH BUSHING A m 365 P.E.C. TO S.A.E. "B" PILOT WITHOUT BUSHING A n 365 P.E.C. TO S.A.E. "B" PILOT WITH BUSHING A o 365 P.E.C. TO S.A.E. "B" PILOT C WITHOUT BUSHING A Note: The XX shown in the part number is in place of the size - the true value must be placed into the part number when ordering parts. For example: Gear set no. A36-50-XX000 changes to A for 1.5 gear size Housing no. A36-33-XX000 changes to A for a 1.5 housing size No porting sizes have been indicated all porting must be specified when ordering parts. Hydraulex Global 153
9 MH365 Series Parts Breakdown DRAWING NO. DESCRIPTION METARIS # ALTERNATE # 18p 365 P.E.C. TO S.A.E. "B" PILOT C WITH BUSHING A BOLTS / STUDS See Fasteners Page 20a MOTOR FLAT WASHER X b PUMP FLAT WASHER X a PUMP HEX NUT X b MOTOR HEX NUT X Not Shown CONTINENTAL SHAFT 1.250" KEYED (5/16") TYPE 11 A Not Shown CONTINENTAL SHAFT 14 TOOTH SPLINE 1.228" maj. dia. TYPE 7 A Not Shown CONTINENTAL SHAFT BRG. RETAINER X Not Shown CONTINENTAL SHAFT BRG. RETAINER SNAP RING X Not Shown SHAFT KEY FOR TYPE 11 SHAFT X Not Shown PIGGYBACK CONNECTING SHAFT BEARING X Not Shown PIGGYBACK CONNECTING SHAFT LIP SEAL X Not Shown PIGGYBACK CONNECTING SHAFT BEARING SNAP RING X Not Shown 1/4" ORB DRAIN PLUG X Hydraulex Global
10 MH365 Series Dimensions Single Unit * Shaft dimension will change with the type of shaft used (95.3).5 (12.7) + Gear Width 2.62 (66.5) 6.25 (158.8) 8.38 (212.9) 7.25 (184.2) 4.00 (101.6) Multiple Unit * Shaft dimension will change with the type of shaft used (101.6) 2.62 (66.5) 3.50 (88.9) 6.25 (158.8) + 50% of Gear Width 8.38 (212.9) Dimensions are in inches (millimeters). Hydraulex Global 155
Z SERIES. Z34 Technical Specifications. Hydraulic Pump/Motor Product Group
Z SERIES Hydraulic Pump/Motor Product Group Z34 Technical Specifications Bushing Design Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement or to meet
Z SERIES. Z40 Technical Specifications. Hydraulic Pump/Motor Product Group
Z SERIES Hydraulic Pump/Motor Product Group Z40 Technical Specifications Bushing Design Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement or to meet
Hydraulic Pumps and Motors Catalogue CAT.ASEAN_HYG_PAM_ASMR_MAY2017 (REV.1)
Hydraulic Pumps and Motors Catalogue CT.SEN_HYG_PM_SMR_MY2017 (REV.1) Parker Hannifin Corporation Parker can be found on and around everything that move. We manufacture highly engineered components and
Z SERIES. Z32 Technical Specifications. Hydraulic Pump/Motor Product Group
Z SERIES Hydraulic Pump/Motor Product Group Z32 Technical Specifications Bushing Design Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement or to meet
Table 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
Heavy-duty cast-iron pumps and motors Series PGP, PGM 300. Characteristics. Parker Series 300
Characteristics Parker Series 300 Design - Three-piece cast-iron construction - Low-friction bushing design - Heavy-duty application - Single, multiple, piggyback, and thru-drive assemblies Description
INSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
Z SERIES Z22 TECHNICAL SPECIFICATIONS. Hydraulic Pump/Motor Product Group Roller Bearing Design
Z SERIES Hydraulic Pump/Motor Product Group Roller Bearing Design Z22 TECHNICAL SPECIFICATIONS Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement or
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
CFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI
CFR Series Coils, Transformers OUTLINE Power inductors for preventing the diffusion of noises generated from power circuits and suppressing noise components coming through the power lines. ø8.7 ø11 max.
Grade boundaries June 2018 exams. GCSE Reformed (subjects which use the 9 to 1 grade scale)
Version 1.0 Grade boundaries June 2018 exams GCSE Reformed (subjects which use the 9 to 1 grade scale) This document presents grade boundaries for the new reformed GCSEs which use the 9 to 1 grade scale.
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
SMB5.0A(CA) - SMB440A(CA)
SMB5.0A(CA) - SMB440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Mechanical Data Glass Passivated Die Construction Uni- and Bi-Directional Versions
Gear Pumps / Motors Series PGP / PGM Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Cast-Iron and Aluminium Designs Catalogue HY11-3252/UK January 2002 Heavy-duty pumps and motors Series PGP, PGM Note This document and other information from, its subsidiaries,
VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Multiplication Tables of Various Bases
THE NUMBER BASE 10 100 Ternary (Base 3) 1 2 10 2 11 20 10 20 100 Quaternary (Base 4) 1 2 3 10 2 10 12 20 3 12 21 30 10 20 30 100 Quinary (Base 5) 1 2 3 4 10 2 4 11 13 20 3 11 14 22 30 4 13 22 31 40 10
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
SAMYANG ELECTRONICS SMBJ SMBJ440CA TRANSIENT VOLTAGE SUPPRESSOR. Features. Mechanical Characteristics
SAM YANG SAMYANG ELECTRONICS TRANSIENT VOLTAGE SUPPRESSOR BREAKDOWN VOLTAGE: 5.0 --- 440 V PEAK PULSE POWER: 600 W SMB (DO-214AA) Features Working peak reverse voltage range 5.0V to 440V. power dissipation
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
Gear Pump Division. Coding
Gear Pump Division Coding October 28, 2014 Commercial Roller Bearing Gear Pumps Major Components PGP050B278BYOL20-98DAF12-1 1 3 1 2 3 4 5 6 7 2 5 6 1) Shaft End Cover 2) Port End Cover 3) Gear Housing
DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
SMA6J5.0A(CA) - SMA6J440A(CA)
SMA6J5.0A(CA) - SMA6J440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available
MCC omponents Itasca Street Chatsworth
omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Z10 & Z16 TECHNICAL SPECIFICATIONS
Z SERIES Hydraulic Pump/Motor Product Group Roller Bearing Design Z10 & Z16 TECHNICAL SPECIFICATIONS Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement
SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.
1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.
SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
MCC SMBJ5.0 THRU SMBJ440CA. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt. Mechanical Data
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ440CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
* * 124 SERIES * * * * ENGINEERING CODEBOOK * *
* * 124 SERIES * * * * ENGINEERING CODEBOOK * * THROUGH THE USE OF THIS CATALOG ALL THE COMPONENT PARTS OF ANY PERMCO PUMP OR MOTOR CAN BE DETERMINED EXCLUDING FASTENERS. THIS CODE BOOK IS FOR THE 124
Effective Date: June Rev. 7/20/2017- Void After: June 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
SECTION A-A TPA AND ALIGNMENT PLATE IN PRE-SEATED POSITION
THIS RWING IS UNPULISHE. OPYRIGHT Y TE ONNETIVITY RELESE FOR PULITION LL RIGHTS RESERVE. P LTR ESRIPTION TE WN PV REVISE PER EO00 MR JMS H REVISE PER EO00 PR JMS H QTY. REQUIRE INEX INEX INEX LIST OF PRTS
Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON
Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves SIZE 26 mm Individual mounting Valve only No base non plug-in Conform to ISO 15407/1 Manifold mounting Valve only No base non plug-in Conform to ISO 15407/1
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
LYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
CROSS REFERENCE LIST AIRTEX
AIRTEX E10007 7.21659.72 E10008 7.21659.72 E10009 7.21287.53 E10200M 72 200 00 E10201M 73 006 01 E10202M 73 010 00 E10202M ESS 273 E10203M 73 014 01 E10204M 73 068 00 E10205M 73 080 01 E10206M 73 080 02
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
General. Principles. 3-Trapped Key Switches. 11-Cat. No. Index. Logic. Power. Safety Switches Trapped Key Switches Overview
R Safety Trapped Key Overview Key Coding Below is an example reference guide that is useful in selecting and tracking codes. Start down the Aa column as the lower codes (typically Aa to Za) are stocked.
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Issue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
SLIT TYPE RODLESS CYLINDER ORC63.80
BK-UC003 Ver.1.0 Air Cylinder SLIT TYPE ODLESS CYLINDE OC63.80 Series INSTUCTION MANUAL Ver.1.0 Handling Instructions and Precautions Selection and Mounting Allowable load and moment Although the rodless
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Tamil Nadu Public Service Commission
ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c
Measurement designations. General. BEP codes
BEP (Bodywork Exchange Parameter) are codes that identify unique targets on the vehicle to make information transfer between the vehicle manufacturer and bodybuilder simpler. The BEP codes follow the international
SELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford
SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,
STC Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices. Air Cylinders
Catalog: PUB 06 CYL STC Advanced Design Precision Engineered Fine Quality Excellent Prices connects fluid power to industrial automation F1 Table of Contents STC Air Cylinder Numbering System............F2
3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
The Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
MOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
LPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
Field Variable Area Flowmeters BFP Global Purgemaster
Data Sheet IT Field Variable Area Flowmeters BFP Global Purgemaster 10A6100 n High Strength Stainless Steel Body - Rigid construction to maintain tube alignment and resistance to pipe strain. n "Snap-in"
REV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
AUDI A A A A A A A A A A A A A A A
AUDI A4 04-07 07-A404-01E2-8E0941004AJ 8E0941003AJ 07-A404-05 8E0941700E 8E0941699E 07-A404-03 8E0807105GRU 07-A404-04 07-A404-07 8E0853651J1QP 07-A404-05C3 BUMPER 07-A404-07P1 LICENSE PLATE 8E0807285M1QP
Combined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
DATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
ROLLER BEARING SERIES WINCH MOTORS 3100/5100/7600
ROLLER BEARING SERIES WINCH MOTORS 31/51/76 W76 SERIES SINGLE UNIT WINCH MOTOR FEATURES Heavy duty roller bearing design Special high tooth gear set to maximize starting torque Start-up torque values up
ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
Tube Data. For HEATHKIT TT-1A. Tube Tester
Tube Data For HEATHKIT TT-1A Tube Tester November 1978 CHART ABBREVIATIONS REMARKS COLUMN Specifies information pertaining to testing of the tube. F Meter should indicate short when LEAKAGE switch is in
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
Mounting elements for hydraulic cylinders
Mounting elements for hydraulic cylinders RE 17042/10.07 Replaces: 09.07 1/28 Mounting elements Overview of contents H/A 3121/92 Contents Page Mounting elements 1 Overview of mounting elements 2, 3 Self-aligning
101 SERIES ISO-A BC
101 SERIES ISO-A Manufactured according ISO 7241-A norm, DN13 size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials