Raw Material and Energy Surcharges USD/lb.
|
|
- Archibald Flynn
- 5 years ago
- Views:
Transcription
1 If an alloy you purchase is not listed, call Carpenter within the U.S. at Outside the U.S., call , press 2 for Customer Service. Chrome-based (powder products) CarTech Micro-Melt NiCr49Nb UltraFine 17Cr-4Ni MA 3X CarTech UltraFine 316 MA CarTech UltraFine 420 MA CarTech Micro-Melt Cobalt-based (powder products) CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 188B CarTech Micro-Melt 1B CarTech Micro-Melt CarTech Micro-Melt 50Nb CarTech Micro-Melt CarTech Micro-Melt 6LF CarTech Micro-Melt CarTech Micro-Melt A CarTech Micro-Melt BioDur CCM CarTech Micro-Melt CCM CarTech Micro-Melt CCM GADS CarTech Micro-Melt CCM PLUS CarTech Micro-Melt F CarTech Micro-Melt F CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt HS CarTech Micro-Melt Merl CarTech Micro-Melt Mo CarTech Micro-Melt P CarTech Micro-Melt P CarTech Micro-Melt P CarTech Micro-Melt R CarTech Micro-Melt TDCA
2 CarTech Micro-Melt WearCorr CarTech UltraFine CCM CarTech UltraFine CCM PLUS CarTech UltraFine CoCr CarTech UltraFine F-75HP CarTech UltraFine H Micro-Melt Maraging 509B CarTech Micro-Melt CTS Micro-Melt Biodur CCM LS Micro-Melt CCM A764 Mod CarTech Micro-Melt CoWCr CarTech UltraFine FeCo CarTech Micro-Melt CCM MC Cobalt/Nickel-based (powder products) CarTech UltraFine MP35N Copper-based (powder products) CarTech Micro-Melt C CarTech Micro-Melt CuNiSiCr CarTech Micro-Melt G CarTech UltraFine CuNiSnP CarTech UltraFine C CarTech UltraFine Cu15SnP CarTech UltraFine Cu-Electr CarTech UltraFine Copper-MIM UltraFine C Iron-based (powder products) CarTech Micro-Melt CarTech Micro-Melt 654SMO CarTech Micro-Melt 904L CarTech Micro-Melt BS CarTech Micro-Melt Fe LC CarTech Micro-Melt Fe Powder CarTech Micro-Melt LAW 100X CarTech Micro-Melt Sanicro CarTech Micro-Melt CarTech Micro-Melt NCORR CarTech Micro-Melt Hiperco CarTech Micro-Melt FeCoTa
3 CarTech Micro-Melt FeCoCrNi CarTech Micro-Melt FeCoTaMo CarTech Micro-Melt AFA CarTech Micromelt AFA CarTech Micro-Melt Ferrium M CarTech Micro-Melt 2507 SDplx CarTech Micro-Melt VeKo25Cr CarTech Micro-Melt #N/A #N/A #N/A Micro-Melt Aermet-for-tooling #N/A #N/A #N/A CarTech Micro-Melt A #N/A #N/A #N/A Iron/Cobalt-based (powder products) CarTech UltraFine Hiperco Micro-Melt Hiperco 50 HS Iron/Nickel (powder products) CarTech UltraFine GHS Nickel-based (powder products) CarTech IN CarTech Micro-Melt CarTech Micro-Melt 247LC CarTech Micro-Melt 247LC Mod CarTech Micro-Melt CarTech Micro-Melt 50/ CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 622 AWS CarTech Micro-Melt CarTech Micro-Melt 625+W CarTech Micro-Melt 625AM CarTech Micro-Melt 625Ar CarTech Micro-Melt 625LF CarTech Micro-Melt 625M CarTech Micro-Melt 713C CarTech Micro-Melt CarTech Micro-Melt 80/ CarTech Micro-Melt CarTech Micro-Melt A CarTech Micro-Melt A CarTech Micro-Melt A
4 CarTech Micro-Melt A CarTech Micro-Melt B CarTech Micro-Melt B CarTech Micro-Melt B CarTech Micro-Melt B CarTech Micro-Melt C CarTech Micro-Melt C CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt G CarTech Micro-Melt GHS CarTech Micro-Melt HX CarTech Micro-Melt HyMu CarTech Micro-Melt HyMu "800" CarTech Micro-Melt IN CarTech Micro-Melt MAR-M CarTech Micro-Melt N5A CarTech Micro-Melt N5A/N5B CarTech Micro-Melt N5B CarTech Micro-Melt NFM CarTech Micro-Melt NiCoCrMo CarTech Micro-Melt NiCrMoAl CarTech Micro-Melt NiCrMoB CarTech Micro-Melt TDCA/TDCB CarTech Micro-Melt TDCB CarTech UltraFine 713C CarTech UltraFine CarTech UltraFine Alloy X CarTech UltraFine HX CarTech UltraFine K CarTech UltraFine NiCoCrAlY CarTech Micro-Melt BRB CarTech Micro-Melt G CarTech Micro-Melt Waspaloy CarTech Micro-Melt A CarTech Micro-Melt 5 Fe
5 CarTech Micro-Melt CarTech UltraFine CarTech UltraFine Fe-50Ni CarTech Micro-Melt L CarTech Micro-Melt Ni-24.5Cr CarTech Micro-Melt HX-1LC CarTech Micro-Melt R CarTech Micro-Melt R CarTech Micro-Melt C CarTech Micro-Melt 718 AM CarTech Micro-Melt CarTech Micro-Melt Micro-Melt STAL18SILAY CarTech Micro-Melt 738 LC CarTech Micro-Melt CarTech Micro-Melt HX LC CarTech Micro-Melt HX CarTech Micro-Melt R CarTech Micro-Melt 109 Mod CarTech Micro-Melt Ni60H CarTech Micro-Melt 625F CarTech Micro-Melt CarTech Micro-Melt NiCrAlY CarTech Micro-Melt CarTech UltraFine Ni20Cr CarTech UltraFine NiCrMo CarTech UltraFine CarTech UltraFine M CarTech UltraFine R UltraFine Maraging CarTech UltraFine HyMu CarTech Micro-Melt Tool Steel (powder products) CarTech Micro-Melt Custom CarTech Micro-Melt Custom CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 100Cr CarTech Micro-Melt 100Cr CarTech Micro-Melt
6 CarTech Micro-Melt CarTech Micro-Melt 15Cr-5Ni CarTech Micro-Melt 15Cr-5Ni CarTech Micro-Melt 16MnCr CarTech Micro-Melt 16MnCr CarTech Micro-Melt 17Cr-4Ni CarTech Micro-Melt 17Cr-4Ni CarTech Micro-Melt CarTech Micro-Melt 2205 Duplex CarTech Micro-Melt 2505 SDplx CarTech Micro-Melt 2205 SDplx CarTech Micro-Melt 2205M CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 23S CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 254SMO CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 304B CarTech Micro-Melt 304B CarTech Micro-Melt 304B CarTech Micro-Melt 304L CarTech Micro-Melt 308L Mod CarTech Micro-Melt 309L CarTech Micro-Melt 30LS CarTech Micro-Melt 30Nb CarTech Micro-Melt CarTech Micro-Melt 316L CarTech Micro-Melt 316L AWS CarTech Micro-Melt 316L+S CarTech Micro-Melt 316LHSi CarTech Micro-Melt 316LN CarTech Micro-Melt 316Lx CarTech Micro-Melt 347H CarTech Micro-Melt
7 CarTech Micro-Melt 410L CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 416R CarTech Micro-Melt CarTech Micro-Melt 420 LCM CarTech Micro-Melt 420-CW CarTech Micro-Melt 420LC CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 440C CarTech Micro-Melt 440-XH CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt 6126Ni-free CarTech Micro-Melt CarTech Micro-Melt 736A CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt A CarTech Micro-Melt A11HC CarTech Micro-Melt A11LVC CarTech Micro-Melt A11-VP CarTech Micro-Melt Aermet CarTech Micro-Melt Aermet CarTech Micro-Melt AISI CarTech Micro-Melt AM400Plus
8 CarTech Micro-Melt APM CarTech Micro-Melt CD# CarTech Micro-Melt D CarTech Micro-Melt D CarTech Micro-Melt Duplex CarTech Micro-Melt F CarTech Micro-Melt FeSi CarTech Micro-Melt FeSi CarTech Micro-Melt Grade CarTech Micro-Melt H CarTech Micro-Melt H CarTech Micro-Melt HS CarTech Micro-Melt M CarTech Micro-Melt M CarTech Micro-Melt M4 HCS CarTech Micro-Melt M CarTech Micro-Melt M CarTech Micro-Melt M48 LS CarTech Micro-Melt Maxamet CarTech Micro-Melt MV 11K CarTech Micro-Melt NOREM CarTech Micro-Melt O CarTech Micro-Melt P CarTech Micro-Melt PD# CarTech Micro-Melt PD# CarTech Micro-Melt SA Micro-Melt Sanicro 15-5PH CarTech Micro-Melt 15-5PH CarTech Micro-Melt T CarTech Micro-Melt T15 Plus CarTech Micro-Melt TD# CarTech Micro-Melt TF CarTech Micro-Melt TF CarTech Micro-Melt TMM CarTech Micro-Melt VA CarTech Micro-Melt W4841Nb CarTech Micro-Melt X Micro-Melt X4CrNiMo CarTech UltraFine CarTech UltraFine CarTech UltraFine 17Cr-4Ni
9 CarTech UltraFine 304L CarTech UltraFine 316L CarTech UltraFine 410L CarTech UltraFine 430L CarTech UltraFine CarTech UltraFine 4340 MA 3X CarTech UltraFine 440C+1.5Nb CarTech UltraFine D CarTech UltraFine Fe14MnC UltraFine Fe17Cr11Mn3Mo CarTech UltraFine FeCrMnMo CarTech UltraFine Fe-30Cr CarTech UltraFine Fe30Ni CarTech UltraFine Fe8Ni CarTech UltraFine FeCrAlY CarTech UltraFine FeSiAl CarTech UltraFine H CarTech UltraFine M CarTech UltraFine Mod FeSiAl CarTech UltraFine S CarTech UltraFine SCM UltraFine X2NiCoMo CarTech UltraFine X65Cr CarTech Micro-Melt 65Fe35Co CarTech Micro-Melt 255N CarTech Micro-Melt 431 FM CarTech Micro-Melt CarTech Micro-Melt CarTech UltraFine Fe-3Si CarTech UltraFine SKH CarTech UltraFine Fe-6Si CarTech UltraFine F CarTech UltraFine CarTech UltraFine Fe-18Cr CarTech UltraFine CarTech UltraFine VeKo25Cr CarTech UltraFine 4140 MA CarTech UltraFine HK CarTech UltraFine Fe-42Ni CarTech UltraFine CarTech Micro-Melt
10 CarTech Micro-Melt Invar CarTech Micro-Melt Alloy CarTech Micro-Melt EN CarTech Micro-Melt PWC CarTech Micro-Melt CarTech Micro-Melt BSEC CarTech Micro-Melt P21 Mod CarTech Micro-Melt CarTech Micro-Melt FeCoMo CarTech Micro-Melt 13Cr-8Ni CarTech Micro-Melt FeCrWTi CarTech Micro-Melt 316L Mod CarTech Micro-Melt 316L Mod CarTech Micro-Melt 316L Mod CarTech Micro-Melt C CarTech Micro-Melt 420-CW Mod Micro-Melt Ferrium PH48S CarTech Micro-Melt Fe-10Ni Micro-Melt Ferrium C CarTech Micro-Melt SA508 Gr4N CarTech UltraFine 17Cr-4Ni Ar CarTech Micro-Melt HTMO CarTech Micro-Melt CarTech Micro-Melt NitroMaxx CarTech Micro-Melt M CarTech Micro-Melt FeCrAlTi CarTech Micro-Melt SHS CarTech UltraFine 13Cr-8Ni CarTech UltraFine 42CrMo UltraFine BioDur 108 low Ni CarTech UltraFine CarTech UltraFine BioDur CarTech UltraFine Custom CarTech UltraFine Fe10Mn3Si CarTech UltraFine 440A CarTech UltraFine 15Cr-5Ni CarTech UltraFine X20Cr CarTech UltraFine S CarTech UltraFine FeCoSiNbBCu CarTech UltraFine 18Ni CarTech UltraFine Fe6.5Si5Cr
11 CarTech UltraFine Custom CarTech UltraFine Custom CarTech UltraFine FeSiNbCuB UltraFine Hi Permeability CarTech UltraFine X25CrMo CarTech UltraFine A CarTech UltraFine CarTech UltraFine FeCo CarTech UltraFine 440C CarTech UltraFine 420Mod CarTech Micro-Melt CarTech Micro-Melt AF MS-1(N) CarTech Micro-Melt NiMark CarTech UltraFine 316L Mod CarTech Micro-Melt CarTech Micro-Melt 30CD CarTech Micro-Melt Wear CarTech Micro-Melt Wear Tungsten/Nickel-based (powder products) CarTech Micro-Melt Amega NM CarTech Micro-Melt NT CarTech Micro-Melt NT-60KS CarTech Micro-Melt NT-60SP CarTech Micro-Melt NT-70SP CarTech Micro-Melt NT CarTech Micro-Melt NT-50 SPH Other (powder products) CarTech Micro-Melt Pyrowear Micro-Melt Glass Sealing CarTech UltraFine CarTech Micro-Melt CarTech Micro-Melt CarTech UltraFine Unless otherwise noted, trademarks reg. U.S. Pat. & Tm. Off. to CRS Holdings, Inc., a subsidiary of Carpenter Technology Corporation.
Raw Material and Energy Surcharges USD/lb.
If an alloy you purchase is not listed, call Carpenter within the U.S. at 800-654-6543. Outside the U.S., visit www.cartech.com and click "Request Quote" to contact a sales office near you. STAINLESS STEELS
More informationRaw Material and Energy Surcharges USD/lb.
If an alloy you purchase is not listed, call Carpenter within the U.S. at 800-654-6543. Outside the U.S., visit www.cartech.com and click "Request Quote" to contact a sales office near you. STAINLESS STEELS
More informationSize Range. Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in. Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in. Hot Worked: 20 mm 450 mm 0.75 in 17.
Bar Size Range Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 15
More informationPeeled and Ground Round Steel Bars
pag. 1 of 9 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy pag. 2 of 9 Products STRUCTURAL AND GENERAL
More informationThe Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
More informationHAND TOOLS HAND TOOLS
HAND TOOLS HAND TOOLS Contents HAND TOOLS BITS & SOCKETS ELECTRIC TOOLS AIR TOOLS STATIC SOLUTIONS GASOLINE ENGINE TOOLS HAND TOOLS TECHNICAL Cr V Mo No. HAND TOOLSBITS & SOCKETS ELECTRIC TOOLS AIR TOOLS
More informationPRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
More informationVES AL Y V BUTTERFL 60
BUTTERFY VAVES 60 ANSI HIGH PERFORMANCE BUTTERFY VAVES High Performance Butterfly Valves Sealing principle of b eccentric HPBV Zero Offset: Concentric valve (zero offset). Disc rotates around the centre
More informationN, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More informationUTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper
Halton UTK, UTT Multi-blade Damper Temperature operation range up to +100 C, optionally up to +200 C Galvanised steel design Classification of casing leakage EN 1751 class B UTK: Shut-off, adjustment,
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationRAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationCameron s Rapid Response Centre in Europe
Cameron s Rapid Response Centre in Europe Proud supplier of valves, actuators, and gearboxes from industry-renowened brands: DOUGLAS CHERO DEMCO WKM NUTRON GROVE NEWCO OIC LEDEEN MAXTORQUE DYNATORQUE Company
More informationRadionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x
Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m
More informationWe manufacture exactly what you need
Bar peeling We manufacture exactly what you need This is our approach to customers and this is the way we design hard metal parts. Direct contact with our skilled technicians is the way to get it. Discover
More informationData sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
More informationng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
More informationAPPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationPRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationGRADES COMPARISON TABLE
GRADES COMARN TABLE CEMENTED CARBIDE M M10 U10E UTi20T U2 UX30 UTi20T A30 UX30 UMN WA10B A EX45 F S 890 IC07 M40 UM40 EX45 01 HTi05T H1 H2 N HTi10 UTi20T E G10E EH20 TH03 S05F T S15F W10 GW15 GW25 G03
More informationAqua Signal Nav Light LED Conversion Guide
Aqua Signal Nav Light LED Conversion Guide AquaSignal Model Series 40 & 41 Nav Light Color Base/Bulb Style Mfg. Bulb No. Lunasea Model # Voltage Visibility 90005, 12 VDC 90006, 24 VDC LLB-25NW-24-SY Single
More informationJOB LOSSES BY STATE, State Industry US total AK AL AR AZ CA CO CT Agriculture, forestry, fisheries -15, ,
State US total AK AL AR AZ CA CO CT -15,597-35 -272-248 -232-3,163-132 -46-3,858-68 4-19 -291-303 -116-11 -3,318-9 -55-32 -73-314 -66-35 -554,750-194 -14,113-7,789-4,781-55,255-4,453-6,836-9,326-13 -190-282
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationTRIUMPH Motor & Frame Numbers By: David Gaylin
TRIUMPH Motor & Frame Numbers By: David Gaylin SIDE-VALVE SINGLES 1905 1906 from 001 followed by day and month of manufacture (25-1 translates to January 25th) 1907 end at 2200 end at 126700 1908 2201
More informationTRIUMPH Motor & Frame Numbers By: David Gaylin
Seite 1 von 5 TRIUMPH Motor & Frame Numbers By: David Gaylin SIDE-VALVE SINGLES 1905 1906 from 001 followed by day and month of manufacture (25-1 translates to January 25th) 1907 end at 2200 end at 126700
More informationXV en /5 XV Knife gate valve DN
-80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationEquipment Welding machine
Equipment Welding machine quasar Speed and ease of use are the unique characteristics of Zhermack s Quasar welding equipment. Quasar and Quasar Plus use the thermal energy produced by an infrared electromagnetic
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationMATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA
PRODUCT DESCRIPTION: PUP JOINT 3" 1502 X 3FT NACE NK-030511 DATE: MAY 19 2011 C: 0.320 Mn: 0.540 Si: 0.270 Cr: 1.030 Ni: 0.100 Mo: 0.170 Cu: 0.190 P: 0.007 S: 0.002 Sn: V: Al: 0.029 Yield: 84,000 PSI HB
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More informationDelivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution
Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service
More informationBlade Fuses - Illuminated Mini Blade
Photo Fuse Features: The photo fuse is designed for the automobile and electrical industry. It has become the original equipment circuit protection standard for automobiles, trucks and low power system.
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationPL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX
PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting
More informationWater analysis, QC and more:
Water analysis, QC and more: photoflex THE REAL MULTI COLORIMETER Standardized and easy-to-use Sturdy and waterproof Sophisticated and versatile Environmental Protection: Fish Farming and Surface Water:
More informationMCC omponents Itasca Street Chatsworth
omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationContents. Milling. Solid end mills
UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect
More informationG-RANGE PIPE CONNECTIONS
G-RANGE PIPE ONNETIONS G-RANGE PIPE ONNETIONS Designed to meet the requirements of plant operators. Due to their efficiency, lightness and reliability, together with extreme qualities of leak tightness,
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationThe Company. We process a wide range of standard and non-standard steel qualities from the areas of carbon steels, tool steels and stainless steels.
The Company Stahlrump has been producing semi-finished steel products in the form of drawn wire, bright bar, cold rolled strip and hardened and tempered strip over 140 years. Stahlrump is renowned for
More informationCROSS REFERENCE - MIFAB vs WADE
CROSS REFERENCE - vs FLOOR DRAINS F-1000-C...1100-C-MR5 F-1100...1000 F-1100-C... 1000-C F-1100-C-DD... 1000-C-HD F-1100-DD...1000-HD F-1100-EF...1000-EF4 F-1100-C-EF...1000-C-EF4 F-1100-EG... 1000-EG8
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH
BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)
More informationSERIES TA (NFPA) CYLINDER
Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder
More informationCONSUMABLES.
M RE CONSUMABLES www.lincolnelectric.eu TABLE OF CONTENTS CONSUMABLES FOR HIGH-END APPLICATIONS APPLICATION SUPPORT METALLURGICAL EXPERTISE LOW ALLOY APPLICATION Cr-Mo Creep Resistant Consumables CrMo
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationAPPENDIX G TABLE OF CONTENTS
APPENDIX G TABLE OF CONTENTS...1 G1.1 IBM iseries And AS/400 Machines...1 IBM ISeries And AS/400 Machines (Type 9401, 9402, 9404, 9045, 9406)...1 Version 5 Software...1 Model 8XX Version 5 Software (Capacity
More informationDamper actuators with spring return
Damper s with spring return 4 Nm 4 Nm damper with spring return 8...16 mm Ø (round shaft), 8...12 mm (square shaft) Max. damper size 0.8 m 2 4 Nm 20 s, -20...+50 C, max. 60 s at -30 C Article Control signal
More informationDiscipline Chemical Testing Issue Date Certificate Number T-3037 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. AIR, GASES & ATMOSPHERE 1. Ambient Air Quality Monitoring Respirable Suspended Particulate Matter Less than 10µm or PM10 IS:5182 (Part 23):2006 5-1000 µg/m3 Respirable
More informationNational Routing Number Administration p-ani Activity and Projected Exhaust Report
National Routing Number Administration 2016 p-ani Activity and Projected Exhaust Report The ATIS Industry Numbering Committee developed the P-ANI Administration Guidelines, which contain the following
More informationMCC SMBJ5.0 THRU SMBJ440CA. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt. Mechanical Data
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ440CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
More informationMiller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011
Medium Duty Hydraulic Cylinders Catalog M0- September, 0 Up to 000 PSI ore Sizes " through " Mounting Styles AV Series Cylinders Up to 0 PSI Permanently Lubricated AL Series Aluminum Cylinders Up to 0
More informationLinear Shafts and Customized Precision Shafts for Linear Motion Systems
Linear Shafts and Customized Precision Shafts for Linear Motion Systems www.nimet.ro / Nimet 2017 where innovation lives Linear Shafts and Customized Precision Shafts for Linear Motion Systems Induction
More informationEXPORTERS OF ENG MATERIALS & FABRICATIONS
EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,
More informationNATIONAL TUBE STOCKHOLDERS LTD (NTS)
1 NATIONAL TUBE STOCKHOLDERS LTD (NTS) Welcome to our NTS Linepipe Products brochure. NTS are one of the UK s leading stockholders of Linepipe products. Operating for more than 30 years from a 37,000m
More informationMAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
More informationCentered Rubber Seated Valves DS Series
Centered Rubber Seated Valves DS Series The Power to Perform. Orton is part of Truflo International plc, a leading supplier of specialist flow control products, with a presence on each continent. Orton
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationdjangoproject.com skillsapp.com for invite)
DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter
More informationCHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationCYLINDERS OPTIONS ACCESSORIES
CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount
More informationCeramics for pyrometers, furnace construction & laboratory ware. Schunk Ingenieurkeramik
Ceramics for pyrometers, furnace construction & laboratory ware Schunk Ingenieurkeramik Advantages High dimensional tolerance Very good thermal shock resistance Chemical corrosion resistance High heat
More informationVERSION 1 / Basic cylinder R Through rod. VERSION 2 D Double acting Y Single acting rear spring* S Single acting front spring
Stainless steel round cylinders with techno-polymer end caps (to ISO 6432 standard for Ø 6 25) DESCRIPTION Cylinders series UP are born as technological efficient reply to the always new needs of different
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationGate, Globe and Check Valves
Gate, Globe and Check Valves 1 COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationINTERVALVE (ENGINEERING DATA SHEET)
GENERAL FEATURES PRODUCT SPECIFICATION MATL. OF CONSTRUCTION OPERATION Title VALVE TYPE VALVE MODEL DESCRIPTION DESIGN, MFG. STD. INTERVALVE (ENGINEERING DATA SHEET) Product Specification for IVEX - F
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationPTS - Single-Blade Damper. Halton PTS. Single-Blade Damper
Halton PTS Single-Blade Damper Shut-off, adjustment, balancing or control damper Casing leakage classification: EN 1751, Class C Casing and damper blade made of galvanised steel Tightness classification
More informationFY 2002 AWA INSPECTIONS
FY 22 AWA INSPECTIONS number of Number of inspections Number of inspections facilities and (sites) category category Inspections for Compliance Other Types of Inspections Dealers 3,893 4,846 Prelicensing
More informationThru-The-Wall TTWC-R Series Condensing Unit Catalog 1-1/2 To 2-1/2 Ton Capacity
Thru-The-Wall TTWC-R Series Condensing Unit Catalog 1-1/2 To 2-1/2 Ton Capacity ALL UNITS MT 2010 DO STANDARDS / ARI 210/240 CONDITIONS With Multi-Family housing on the rise, today s projects require more
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationTECHNICAL PRODUCT DATA SHEET
Product bulletin CV-TE-600-DS TECHNICAL PRODUCT DATA SHEET General ROTARY CONTROL VALVES P ENTRY ANSI 600 Pibiviesse Trunnion Mounted Top Entry high performance full and reduced bore control ball valves
More informationISC CATALOG LEGEND Price update: November 2013
0012-0267 6 36 0012-7011 6 36 004T008 3 32 5.8 006T010 3 32 5.8 008T012 3 32 5.8 010-1401 7 27 153.94 010-1402 7 27 133.59 010-1483 7 27 133.59 010-1894 7 27 205.63 010-2054 7 27 153.99 010T014 3 32 6.1
More informationSelf-Priming Pumps. Characteristic curves for suction lift Hs = 1 m. n 2900 rpm. H m. H m 50 Q 3
www.calpeda-romania.ro 7..9 www.pompe-calpeda.ro 7.79. Construction Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron.
More information