Global leading company in Pneumatic & Hydraulic Control System. KCC Co., Ltd.

Transcription

1 Global leading company in Pneumatic & Hydraulic Control System KCC Co., Ltd.

2 Company Introduction Be A Reliable Company Making the world more convenient with the best quality Since its foundation in 1992, KCC Co., Ltd has continuously developed and produced a variety of hydro pneumatic parts including fittings, speed controllers, hydro pneumatic cylinders and pneumatic solenoid valves with the aim of localization of automobile parts. As a result of generous R&D investments in order to manufacture highquality products, our technologies are now widely recognized. And we are supplying our products to POSCO, Hyundai Steel and Samsung Electronics and realizing our long-cherished dream of developing a truly global brand by carrying out continued overseas marketing in countries such as Japan, Europe and China. KCC Co., Ltd promises that it will make contributions to the improvement of customers productivity and their creation of added value and let the world know Korea s superior technologies by continuing investment in research & development in the future. Business Area 1. Pneumatic Cylinder 2. Hydraulic Cylinder 3. Pneumatic Solenoid Valve 4. Process Valve 5. Air Clean Unit 6. Air Dryer 7. Vacuum Equipment 8. Shock absorber & Gas Spring 9. Accessory 10. The Others Place of Business Head Office Location : Seoul Branch Office Location : Seoul, Daegu, Busan, Daejeon, Gwangju, Changwon 1st Factory Location : Daegu Main Product : Pneumatic Cylinder Pneumatic & Hydraulic R&D office 2nd Factory Location : Daegu Main Product : Hydraulic Cylinder Custom made for special cylinder 3rd Factory Location : Gunpo Main Product : Solenoid Valve, Air Unit Clean room production KCC Co., Ltd. 1

3 INDEX PNEUMATIC CYLINDER Pin cylinder / AJP 6 Guide unit / KGUA 6 Small pin cylinder / ACP 7 Direct mount type cylinder / ACD 8 Round cylinder / ACR 8 Small cylinder(aluminum tube) / ACS2 9 Small cylinder(stainless steel tube) / ACS3 10 Small cylinder(aluminum tube/air cushion) / ACS4 11 Small cylinder(stainless steel tube/air cushion) / ACS5 12 Medium size cylinder / ACM 13 Large cylinder / ACL 14 Extra-large cylinder / ACX 15 Low friction cylinder / KLC 15 Labyrinth cylinder / KLCS 16 Compact guide cylinder / AFG 16 Free mount cylinder / FM, FMD 17 Compact cylinder / AF, ADF 18 Booster Cylinder / KBP 19 Air-hydro converter / CCTS 19 HYDRAULIC CYLINDER Standard hydraulic cylinder / KP140H 20 High-pressure hydraulic cylinder / KP210H 21 Mill type hydraulic cylinder / KPC70/140H 22 High-pressure mill type hydraulic cylinder / KPC210H 23 Telescopic cylinder / KTC70HP 24 Steel compact hydraulic cylinder / KP140HS 25 Aluminum compact cylinder / KP125/160A 26 Rotary hydraulic cylinder / KP35R 27 Industrial dual hook hydraulic cylinder / KH 28 PNEUMATIC SOLENOID VALVE Solenoid Valve 3Port direct acting, M5 / KT Port pilot, M5~1/2 / KS105,210,320,530, Port pilot, namur, 1/4 / KS524, Port pilot, sub base, 1/4, 3/8 / KS Port pilot, sub base, 1/2, 3/4 / KS Port pilot, 1/8, 1/4 / KS341, Port(universal) poppet, 1/4, 3/8 / KPS ,3Port direct acting, M5, 1/4, Ø4, Ø6 / KCAS 36 2,3Port direct acting, M5, 1/8 / KJAS 37 2,3Port direct acting, 1/8 / KST 38 3Port direct acting, metal seal, 3/8, 1/2 / KS Port direct acting, metal seal, 3/8, 1/2 / KS Port pilot, metal seal, 3/8, 1/2 / KSP Port pilot, metal seal, 3/8, 1/2 / KSP Port(universal) poppet, 1/8, 1/4 / KT Port(universal) poppet, 1/4, 3/8 / KT Operated Valve 5Port pilot, M5~1/2 / KA(B)V105,210,320,530, Port pilot, namur, 1/4 / KA(B)V524, Port pilot, 1/8, 1/4 / KA(B)V341, Port(universal) poppet, 1/4, 3/8 / KPA(B) Port direct acting, metal seal, 3/8, 1/2 / KSA Port direct acting, metal seal, 3/8, 1/2 / KSA Port(universal) poppet, 1/8, 1/4 / KTA Port(universal) poppet, 1/4, 3/8 / KTA Manifold Block M5~1/2 / KMF 53 Logic Valve 1/8, 1/4 / KOR,KAND 54 Check Valve 1/8~1 / KACV 55 Mechanical Valve 2,3Port, 1/8 / KVM ,3Port, 1/4 / KVM200, KVMS Port, 1/4 / KVM ,5Port, M5 / K 59 Hand Valve 3,5Port, push pull type, 1/8, 1/4 / KHP 60 5Port, lever type, 1/8, 1/4, 3/8 / KHV320, Port, lever type, 1/4, 3/8, 1/2, 3/4 / KHV 62 Foot Valve 2,3,5Port, 1/4, 3/8 / SFVM 62 Quick Exhaust Valve 1/8, 1/4 / KQE /4, 3/8, 1/2 / SQE 63 Residual Pressure Exhaust Valve 1/8~1 / KVHS 64 AC/DC Solenoid AC Solenoid / STC 65 DC Solenoid / STD 66 Silence solenoid / STD

4 KCC Co., Ltd. PNEUMATIC & HYDRAULIC PROCESS VALVE 2Port Solenoid Valve(Air, Water type) HDA,KAB 67 HDW 68 HPW102~ HPW2510F(O)~6524F(O) 70 HPW-NO, DNO 71 2Port Solenoid Valve(Steam, Hot Water type) HVD022NO~052NO 72 HDS021, 022, 042, HPS102~ HPS2510F(O)~6524F(O) 75 HVS102NO, 103NO, 154NO 76 HPS102NO~6524NO 77 Electric Motor Valve HMV-BU/BUS/BUV 96 HMV-SC/BSC 97 HMV-FL/FLP 98 Electric Motor Proportional Control Valve HMV02SC-P~18SC-P 99 AIR CLEAN UNIT Drain separator / KAMG250~ Line lter / KAFL250~ Mist separator / KAM250~ Micro mist separator / KAMD250~ Free lter micro mist separator / KAMH250~ Auto drain valve / KAD Modular type air unit / KAU2000M~6000M 103 INDEX 2Port High Pressure Solenoid Valve HPW102-20~ HPW3212F-20~5020F HPM206-20~ Port Direct Acting Piston Pilot Kick Type HKW154~ HKS154~ ,3Port SUS Solenoid Valve HDA021S, 032S 83 HDC HDW032S, 033S 84 HVS042(NO), 043(NO) 85 HSR053S, 063S 86 HSR102P~104P 86 HPW103S~2510S 87 3Port Solenoid Valve HDW011-3~052~3 88 Special Solenoid Valve HPW5020-C, HVV12FL, HDW154B, SV ,3Port Solenoid Valve(Chemical type) HCV 90 HTV 91 HCTV 92 HPV 93 2,3Port Coolant Valve KLCV 94 Pneumatic Cylinder Valve HAV 95 Modular type air unit / KAU2010M~6010M 103 Modular type air unit / KAU2020M~6020M 104 Modular type air unit / KAU2030M~4030M 104 Modular type air unit / KAU2040M~4040M 105 Modular type air unit / KAU2050M~4050M 105 Modular type air unit / KAU2060M~4060M 106 Modular type lter regulator / KAW2000M~6000M 106 Modular type air lter / KAF2000M~6000M 107 Modular type mist separator / KAFM2000M~4000M 107 Modular type micro mist separator / KAFD2000M~4000M 108 Modular type air regulator / KAR2000M~6000M 108 T type air regulator / KAR2000T~6000T 109 Modular type air lubricator / KAL2000M~6000M 109 Auto drain kit / AD200~ Gauge / G40, G Bracket for air unit 111 Water separator / KWS 111 AIR DRYER Refrigerated Air Dryer Air cooled type / KDHR 112 Water cooled type / KDHR-W 112 High temperature type / KDHT 113 Desiccant Air Dryer Heatless type / KDAH 113 Heater type / KDAE 114 Skid type / KDAE-S 114 Oilless type / KDAO 115 KCC Co., Ltd. 3

5 INDEX Heater blower type / KDAB 115 Non-purge type / KDNP 116 After cooler / KDH-C 116 Oil-water separator / SEPREMIUM 117 Receiver tank / KDRT 118 Auto trap / KDHAD 118 Electrical trap(timer valve) / EZ High performance air lter / KDXF 119 High performance lter element / KDXE 119 SHOCK ABSORBER & GAS SPRING Industrial shock absorber(adjustable type) / KPA,KUPA 120 Industrial shock absorber(non-adjustable type) / KSCA 121 Constant speed controller / KCSC 122 Gas spring / KBG 122 VACUUM EQUIPMENT Vacuum pad free joint / FJ 123 Compact vacuum pad / DM 123 Vacuum pad / KDS 123 Compact vacuum holder / DSA,DSU,DSC,DSD,DSG 124 Vacuum unit / DSA,DSB,DSU,DSC,DSD,DSG 124 Vacuum Ejector / KSV 125 Vacuum safety valve / KVSC 126 Vacuum lter / CF 126 Rotary vane vacuum pumps(oil circulated type) / MVO 127 (Oil circulated type) / SVO 127 (Oil ooded type) / MOT 128 (Dry running type) / SML 128 Liquid ring vacuum pumps / DWV 129 Suction pump for ent medical / ENT 129 Suction pump for dental medical / DEN400, SYSDEN Vacuum tank system / S 130 ACCESSORIES One touch tting 131 Compact one touch tting 132 Metal two touch tting 132 Speed controller / SC,SCS,SC-F 133 Piping type speed controller / ASCM, KAS, SAS 134 Hand valve with one touch tting / KHVC,KHVF,KHVU,KHVM 136 Hand slide valve / SH 137 Polyurethane tube / U 137 Nylon tube / N 138 Te on tube / PFA, PTFE 138 Polyurethane coil tube / UC 139 Plastic Silencer / SAS 139 Mass ow (Steel) silencer / KAN 139 Sintered silencer / SL 140 Air vent / AIR VENT 140 Speed controller with silencer / JASN 140 Exhaust cleaner / KMC 141 Filter element / AFE 141 Rod end bearing / JF 141 Floating joint / SSJ,SFJ,JAH,JAHF 142 Distributor 142 OTHERS Reed auto switch 143 Solid state auto switch 144 Cylinder for tierod mount 144 Cylinder for freeband & exclusive band 144 Flow switch / SFS 145 Pressure Switch / HS 145 Digital pressure sensor switch / KTD-600,KTD-1000,KDPC 146 Rotary joint(for air, water) / SRJ 147 (Bellow- tted at seal) / DR (Aluminium, brass, SUS type) / DR (Lubrication free double seal for high temperature uids) / DR (Lubrication free ductile cast iron body) / DR (For Hydraulic) / DR (For cutting oil) / DR Air feeder / KPF 150 Air transporter / KSM 151 Air ball lifter / KABL 151 Air vibrator / SB,KPV 152 Vortex cooler / KVT 152 Hydraulic power pack / KPP 153 Piping type speed controller / SAS 135 Speed controller with pilot check valve / SCPV

6 KCC Co., Ltd. PNEUMATIC & HYDRAULIC P6~19 P20~28 INDEX Pneumatic Cylinder P29~66 Hydraulic Cylinder P67~99 Pneumatic Solenoid Valve P100~111 Process Valve P112~119 Air Clean Unit P120~122 Air Dryer P123~130 Shock Absorber & Gas Spring P131~142 Vacuum Equipment P143~153 Accessories Others KCC Co., Ltd. 5

7 AJP series Pannel Attached Single Acting Cylinder PNEUMATIC CYLINDER AJP - B Short-stroke cylinder designed with a shorter overall length than a conventional cylinder. Space saving pin cylinder for panel mounting. It miniaturizes the size of mechanical devices. Single acting/ Spring return Series AJP : Pin Cylinder Bore size 6 : 6mm 10 : 10mm 15 : 15mm Action Single acting spring return Air Proof pressure 10.5kgf/cm 2 (1.05MPa) Max. operating pressure 7kgf/cm 2 (0.7MPa) Min. Ø6 2kgf/cm 2 (0.2MPa) operating pressure Ø10, Ø15 1.5kgf/cm 2 (0.15MPa) Ambient & fluid temperature 5 ~ 60 Operating piston speed 50~500mm/s Cushion None Lubrication Not required Tolerance of stroke Tolerance of thread KS class 2 Mounting style Panel mounting Accessory For Rod end thread type. Cylinder stroke 5 : 5mm 10 : 10mm 15 : 15mm Rod end thread Nil : With thread B : Without hread Mounting nut(2) Rod end nut(2) Hose nipple (Option) Nil : None (Standard) H4 : Tube size Ø4-2.5 H6 : Tube size Ø6-4 KGUA series Guide Unit KGUA Cylinder is not included. KGUA Smooth and precise movement. Excellent appearance and easy to mount. Can be combined with various cylinders. Adoption of advanced material in Non-Lubricated bearing Series KGUA : Guide Unit for Cylinder Bore size of applicable cylinder Bore size Port Size 10 Ø10 M5 x Ø16 M5 x Ø20 Rc(PT) 1/8 25 Ø25 Rc(PT) 1/8 32 Ø32 Rc(PT) 1/8 40 Ø40 Rc(PT) 1/4 Stroke Bore size Standard stroke 5, 10,15, 20, 25, 30, 35, 40, 45, 50, 60, Ø10 70, 75, 100, 125, ,15, 20, 25, 30, 35, 40, 45, 50, 60, Ø16 70, 75, 100, 125, 150, 175, 200 Ø20 10,15, 20, 25, 30, 35, 40, 45, 50, 60, Ø25 75, 100, 125, 150, 175, 200, 250, 300, Ø32 350, 400, 450, 500, 550, , 50, 75, 100, 125, 150, 175, 200, Ø40 250, 300, 350, 400, 450, 500, 550, 600 Operating piston speed 50 ~ 500mm/s Tolerance of stroke 0 ~ 1,000 ST : ST ~ :

8 ACP series Pin Cylinder PNEUMATIC CYLINDER ACP - LB 16 - S 100 Pneumatic Cylinder Standard type with build-in magnet. Easy mounting as tool. Directly mountable onto the cover. Double acting/ Single rod Double acting/ Double rod Single acting/ Spring return Single acting/ Spring extend Series ACP : Double acting Single rod type Pin Cylinder ACPW : Double acting double rod type Pin Cylinder Mounting style B : Standard LB : Foot F : Flange CB : Double clevis (Exclude Ø6 type) Bore size 6 : 6mm 10 : 10mm 16 : 16mm Cylinder stroke Action Double Bore size acting 5, 10, 15, 20, 25, 30, Ø6 35, 40, 45, 50, 60, 70, 75, 100 5, 10, 15, 20, 25, 30, 35, 40, 45, Ø10 50, 60, 70, 75, 100, 125, 150 5, 10, 15, 20, 25, 30, 35, 40, 45, Ø16 50, 60, 70, 75, 100, 125, 150, 175, 200 Double rod - 15, 30, 45, 60 15, 30, 45, 60 Single acting 15, 30, 45, 60 15, 30, 45, 60 15, 30, 45, 60 Head cover port location Bore size Ø6 Ø10, Ø16 Nil Axial Perpendicular to axis R - Axial Not available for double rod and CB type. Action Nil : Double acting S : Single acting spring return T : Single acting spring extend Not available for Double rod type. Rod end attachment Nil : Rod end nut (Standard) :2 pc I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model C72 D-C72K H7A1 D-H7A1K C73 D-C73K H7A2 D-H7A2K C76 D-C76K H7B D-H7BK C80 D-C80K Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Action Double acting Single rod Double acting double rod Single acting spring return Single acting spring extend Air Proof pressure 10.5kgf/cm 2 (1.05MPa) Max. operating pressure Min. operating pressure Ø6 Ø10, Ø16 Ambiet & fluid temperature 1.2kgf/cm 2 (120kPa) 7.0kgf/cm 2 (700kPa) 1.5kgf/cm 2 (150kPa) 0.6kgf/cm 2 (60kPa) 1kgf/cm 2 (100kPa) 5~ kgf/cm 2 (200kPa) 2.5kgf/cm 2 (250kPa) 1.5kgf/cm 2 (150kPa) Operating piston speed Cushion Lubrication 50 ~ 750mm/sec Rubber bumper Not required Tolerance of thread KS class 2 Tolerance of stroke KCC Co., Ltd. 7

9 ACD series PNEUMATIC CYLINDER Direct Mount Type Cylinder ACD B 32 - S 50 Square type rod cover enables direct mounting. Space saving by mounting without bracket. Front mounting & bottom mounting. Double acting/ Single rod Series ACD : Direct Mount Type Cylinder ACD A : Direct Mount Type Cylinder(Air cushion) Mounting style B : Bottom mounting F : Front mounting Bore size 20 : Ø20 25 : Ø25 32 : Ø32 40 : Ø40 Action Proof pressure Max. operating pressure Min. operating pressure Ambient & uid temperature Operating piston speed Cushion Lubrication Cylinder stroke Bore size Ø20 Ø25 Ø32 Ø40 Standard stroke 25, 50, 75, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500 Rod end attachment Nil : None I : Single knuckle joint Y : Double knuckle joint Double acting single rod Air 15kgf/cm 2 (1.5MPa) 9.9kgf/cm 2 (0.99MPa) 0.5kgf/cm 2 (0.05MPa) 5 ~ 60 Rubber bumper(standard) Not required Auto switch C72 : D-C72K C73 : D-C73K C76 : D-C76K C80 : D-C80K H7A1 : D-H7A1K H7A2 : D-H7A2K H7B : D-H7BK Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Tolerance of thread KS class 2 ACR series Round Cylinder Tolerance of stroke Mounting style Bottom mounting, Front mounting ACR - N B 63 - S 100 Series ACR : Round Cylinder (Aluminium) Bore size Ø50 Ø63 Ø80 Ø100 Cylinder stroke Stroke : 25, 50, 75, 100, 125, 150, 200, 250, 300 Lubrication N : Not required (Standard) Mounting style B : Standard type FA : Rod Side Flange Type FB : Head Side Flange type CB : Double Clevis type Rod end attachment Nil : Rod end nut I : Single knuckle joint Y : Double knuckle joint Double acting/ Single rod Type Cylinder Bore size Proof pressure Max. operating pressure Min. operating pressure Ambiet & fluid temperature Operating piston speed Cushion Non-Lubricated Ø50, Ø63, Ø80, Ø100 Air 15kgf/cm 2 (1.5MPa) 9.9kgf/cm 2 (0.99MPa) 0.5kgf/cm 2 (0.05MPa) 5 ~ ~ 600mm/sec Rubber bumper Tolerance of thread KS class 2 Tolerance of stroke ~ 1000 ST : , 1001 ~ 1500 ST : Mounting style Standard, Rod Side Flange, Head Side Flange, Double Clevis 8

10 ACS2 series Small Cylinder (AL Tube) Aluminium tube Rubber bumper & auto switch attached type (standard). With non-lubricated seal. Improved bush decreases de ection, improves lateral load resistance. Easy maintenance with screw fastening. ACS2 - N LB 32 -S 100 Series ACS2 : Double acting single rod small cylinder ACS2W : Double acting double rod small cylinder Lubrication N : Not required(standard) L : Low Hydraulic Pressure(5kgf/cm 2 ) G : Low Hydraulic Pressure(25kgf/cm 2 ) Mounting style B Standard TR Rod Side Trunnion LB Foot TH Head Side Trunnion FA Rod Side Flange BC Boss-cut (Standard) FB Head Side Flange BF Boss-cut Flange CA Single Clevis BT Boss-cut Trunnion CB Double Clevis PNEUMATIC CYLINDER Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) :1 pc I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model C72 D-C72K H7A1 D-H7A1K C73 D-C73K H7A2 D-H7A2K C76 D-C76K H7B D-H7BK C80 D-C80K Pneumatic Cylinder Double acting/ Single rod Single acting/ Spring return Bore size Ø20 Ø25 Ø32 Ø40 Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Double acting/ Double rod Single acting/ Spring extend Cylinder stroke Bore size Standard stroke Max. stroke Ø20 10, 15, 20, 25, 30, 35, 1000 Ø25 40, 45, 50, 60, 75, 100, 125, 150, 175, 200, 250, 1500 Ø32 300, 350, 400, 450, 500, 550, Ø40 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, Special specification Nil : None TS : Multi-step stroke cylinder(single rod) TW : Multi-step stroke cylinder(double rod) TD : Tandem cylinder Stroke adjustable type ASJ : (in forward direction within 25mm) Stroke adjustable type BSJ : (in forward direction within 50mm) S : Single acting spring return T : Single acting spring extend SV : Heat resistant cylinder SS : Stainless steel piston rod Type Double acting Single rod Non-Lubricated Double acting double rod Single acting spring return / Single acting spring extend Low Hydraulic Pressure Air Turbine Oil VG32 Proof pressure Max. operating pressure Min. operating pressure Ambient & uid temperature Operating piston speed Cushion Tolerance of thread Tolerance of stroke 0.5kgf/cm 2 (0.05MPa) 10kgf/cm 2 (1.0MPa) 0.8kgf/cm 2 (0.08MPa) Rubber bumper: 50 ~ 750mm/s, Air cushion: 50 ~ 1000mm/s ~250 ST : 15kgf/cm 2 (1.5MPa) 5 ~ 60 Rubber bumper KS class ~ 500 ST : Forward: 1.8kgf/cm 2 (0.18MPa) Reverse: 2.3kgf/cm 2 (0.23MPa) Rubber bumper: 50 ~ 750mm/s kgf/cm 2 (0.5MPa) 1.8kgf/cm 2 (0.18MPa) Rubber bumper: 15 ~ 300mm/s KCC Co., Ltd. 9

11 ACS3 series Small Cylinder (SUS Tube) PNEUMATIC CYLINDER ACS3 - N B 32 -S 150 Stainless steel tube Rubber bumper & auto switch attached type (standard). With non-lubricated seal. Improved bush decreases de ection and improves lateral load resistance. Lighter and smaller in size than the conventinal ACS2 Series. Series ACS3 : Double acting Single rod Small Cylinder ACS3W : Double acting double rod Small Cylinder Lubrication N : Not required(standard) L : Low Hydraulic Pressure(5kgf/cm 2 ) Mounting style B Standard CD Integrated Clevis LB Foot TR Rod Side Trunnion FA Rod Side Flange TH Head Side Trunnion FB Head Side Flange BC Boss-cut (Standard) CA Single Clevis BF Boss-cut Flange CB Double Clevis BT Boss-cut trunnion Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) :1 pc I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model C72 D-C72K H7A1 D-H7A1K C73 D-C73K H7A2 D-H7A2K C76 D-C76K H7B D-H7BK C80 D-C80K Double acting/ Single rod Double acting/ Double rod Single acting/ Spring return Single acting/ Spring extend Bore size Ø20 Ø25 Ø32 Ø40 Cylinder stroke Bore size Standard stroke Max. stroke Ø20 Ø25 Ø32 Ø40 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Special Order Nil : None TW : Multi-step stroke cylinder(single rod) ASJ : Stroke Adjustable type (in forward direction within 25mm) BSJ : Stroke adjustable type (in forward direction within 50mm) S : Single acting spring return T : Single acting spring extend SV : Heat resistant cylinder SS : Stainless steel piston rod Type Double acting Single rod Non-Lubricated Double acting double rod Single acting spring return / Single acting spring extend Low Hydraulic Pressure Air Turbine Oil VG32 Proof pressure Max. operating pressure Min. operating pressure Ambient & uid temperature Operating piston speed Cushion Tolerance of thread Tolerance of stroke 0.5kgf/cm 2 (0.05MPa) 10kgf/cm 2 (1.0MPa) 0.8kgf/cm 2 (0.08MPa) Rubber bumper: 50 ~ 750mm/s, Air cushion: 50 ~ 1000mm/s 15kgf/cm 2 (1.5MPa) 5 ~ 60 Forward: 1.8kgf/cm 2 (0.18MPa) Reverse: 2.3kgf/cm 2 (0.23MPa) Rubber bumper: 50 ~ 750mm/s 5kgf/cm 2 (0.5MPa) 1.8kgf/cm 2 (0.18MPa) Rubber bumper: 15 ~ 300mm/s Rubber bumper ~250 ST +1.0 : 0 mm 251 ~ 500 ST +1.0 : 0 mm KS class

12 ACS4 series Small Cylinder (AL Tube, Air Cushion) ACS4A - N LB 32 -S 100 Series ACS4A : Double acting single rod small cylinder (Air cushion) ACS4AW : Double acting double rod small cylinder (Air cushion) PNEUMATIC CYLINDER Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Pneumatic Cylinder Aluminum tube Auto switch attached type (Standard) With non-lubricated seal. Improved bush decreases de ection and improves lateral load resistance. Easy maintenance with screw fastening. Lubrication N : Not required(standard) Mounting style B Standard TR Rod Side Trunnion LB Foot TH Head Side Trunnion FA Rod Side Flange BC Boss-cut (Standard) FB Head Side Flange BF Boss-cut Flange CA Single Clevis BT Boss-cut Trunnion CB Double Clevis Rod end attachment Nil : Rod end nut (Standard) :1 pc I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model C72 D-C72K H7A1 D-H7A1K C73 D-C73K H7A2 D-H7A2K C76 D-C76K H7B D-H7BK C80 D-C80K Double acting/ Single rod Double acting/ Double rod Bore size Ø20 Ø25 Ø32 Ø40 Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Cylinder stroke Bore size Standard stroke Max. stroke Ø20 10, 15, 20, 25, 30, 35, 1000 Ø25 40, 45, 50, 60, 75, 100, 125, 150, 175, 200, 250, 1500 Ø32 300, 350, 400, 450, 500, 550, Ø40 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500, Special specification Nil : None TS : Multi-step stroke cylinder(single rod) TW : Multi-step stroke cylinder(double rod) TD : Tandem cylinder ASJ : Stroke adjustable type (in forward direction within 25mm) BSJ : Stroke adjustable type (in forward direction within 50mm) SV : Heat resistant cylinder SS : Stainless steel piston rod Type Double acting Single rod Non-Lubricated Double acting double rod Air Proof pressure Max. operating pressure Min. operating pressure Ambient & uid temperature Operating piston speed Cushion Tolerance of thread Tolerance of stroke 0.5kgf/cm 2 (0.05MPa) 15kgf/cm 2 (1.5MPa) 10kgf/cm 2 (1.0MPa) 5 ~ 60 Air cushion: 50 ~ 1000mm/s Air cushion KS class 2 ~250 ST : kgf/cm 2 (0.08MPa) KCC Co., Ltd. 11

13 ACS5 series Small Cylinder (SUS Tube, Air Cushion) PNEUMATIC CYLINDER ACS5A - N B 32 -S 150 Stainless steel tube Auto switch attached type (Standard) With non-lubricated seal. Improved bush decreases de ection and improves lateral load resistance. Lighter and smaller in size than the conventional ACS2 series. Series ACS5A : Double acting single rod small cylinder (Air cushion) ACS5AW : Double acting double rod small cylinder (Air cushion) Lubrication N : Not required(standard) Mounting style B Standard CD Integrated Clevis LB Foot TR Rod Side Trunnion FA Rod Side Flange TH Head Side Trunnion FB Head Side Flange BC Boss-cut (Standard) CA Single Clevis BF Boss-cut Flange CB Double Clevis BT Boss-cut trunnion Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) :1 pc I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model C72 D-C72K H7A1 D-H7A1K C73 D-C73K H7A2 D-H7A2K C76 D-C76K H7B D-H7BK C80 D-C80K Double acting/ Single rod Double acting/ Double rod Bore size Ø20 Ø25 Ø32 Ø40 Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Cylinder stroke Bore size Standard stroke Max. stroke Ø20 Ø25 Ø32 Ø40 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, Special Order Nil : None TW : Multi-step stroke cylinder(double rod) ASJ : Stroke Adjustable type (in forward direction within 25mm) BSJ : Stroke adjustable type (in forward direction within 50mm) SV : Heat resistant cylinder SS : Stainless steel piston rod Type Double acting Single rod Non-Lubricated Double acting double rod Air Proof pressure Max. operating pressure Min. operating pressure Ambient & uid temperature Operating piston speed Cushion Tolerance of thread Tolerance of stroke 0.5kgf/cm 2 (0.05MPa) 15kgf/cm 2 (1.5MPa) 10kgf/cm 2 (1.0MPa) 5 ~ 60 Air cushion: 50 ~ 1000mm/s Air cushion KS class 2 ~250 ST : kgf/cm 2 (0.08MPa) 12

14 ACM series Medium Size Cylinder PNEUMATIC CYLINDER Auto switch attached type. With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double acting/ Single rod Double acting/ Double rod ACM - N B 80 -S 100 Series ACM : Double acting single rod medium size cylinder ACM W : Double acting double rod medium size cylinder Lubrication N : Not required(standard) L : Low hydraulic pressure(5kgf/cm 2 ) G : Low hydraulic pressure(25kgf/cm 2 ) Q : Low friction type Mounting style B Standard CB Double Clevis LB Foot TC Center Trunnion FA Rod Side Flange TA Rod Side Trunnion FB Head Side Flange TB Head Side Trunnion CA Single Clevis Cylinder stroke Bore size Standard stroke Max. stroke Ø40 25, 50, 75, 100, Ø50 Ø63 Ø80 Ø100 Bore size Ø40 Ø50 Ø63 Ø80 Ø , 150, 175, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, Bellows Material Max. Temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) : 1pc I : Single knuckle joint Y : Double knuckle joint Trunnion/Double clevis pivot bracket Nil : None KA2 : Trunnion pivot bracket CB2 : Double clevis pivot bracket Auto switch Contact Model No contact Model A54 D-A54K F59 D-F59K A56 D-A56K F5P D-F5PK A64 D-A64K J59 D-J59K A90(V) D-A90(V)K J51 D-J51K A93(V) D-A93(V)K F9N D-F9N(V)K A96(V) D-A96(V)K F9P D-F9P(V)K F9B D-F9B(V)K Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Special Order Nil : None TS : Multi-step stroke cylinder(single rod) TW : Multi-step Stroke Cylinder (Double rod) TD : Tandem cylinder ASJ : Stroke Adjustable type (in forward direction within 25mm) BSJ : Stroke adjustable type (in forward direction within 50mm) S : Single acting spring return T : Single acting spring extend SV : Heat resistant cylinder SS : Stainless steel piston rod Pressurized on rod side Pressurized on head side Pneumatic Cylinder Type Non-Lubricated Single rod Double rod Low Hydraulic Pressure Air Turbine Oil VG32 Proof pressure 15kgf/cm 2 (1.5MPa) Max. operating pressure 9.9kgf/cm 2 (0.99MPa) Low Hydraulic Pressure L Type: 5kgf/ cm 2 (0.5MPa) Min. operating pressure 0.5kgf/cm 2 (0.05MPa) 1.0kgf/cm 2 (0.1MPa) Ambient & uid temperature 5 ~ 60 Operating piston speed 50 ~ 500mm/sec 0.5 ~ 300mm/sec Cushion Both side air cushion None Tolerance of thread KS class 2 Tolerance of stroke ~250 ST : ~ 800 ST : KCC Co., Ltd. 13

15 ACL series Large Cylinder PNEUMATIC CYLINDER ACL - B S 200 Significantly improved cushion performance. Aluminum tube available for Ø125~Ø200. Ligher weight & auto switch type available. Steel tube : Ø250~Ø300 Excellent durability and performance. Various mounting styles. Double acting/ Single rod Double acting/ Double rod Series ACL : Double acting single rod large cylinder ACLW : Double acting double rod large cylinder Lubrication Nil Lubricated N Non-Lubricated (Standard) L Low hydraulic pressure (5kgf/cm 2 ) G Low hydraulic pressure (25kgf/cm 2 ) Auto Switch Nil: None H: Auto swith attached (Ø125 ~ Ø160) Tube Material Nil AL * Only for bore size Ø125 ~ Ø200 F Steel Cover Material Ø125~Ø200 Ø250~Ø300 Nil AL(Standard) Steel(Standard) FC Steel - Mounting style B Standard CB Double Clevis LB Foot TC Center Trunnion FA Rod Side Flange TA Rod Side Trunnion FB Head Side Flange TB Head Side Trunnion CA Single Clevis Bore size Ø125 Ø140 Ø150 Ø Ø180 Ø200 Ø250 Ø300 Cylinder stroke Bore size Standard stroke Max. stroke Ø125 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, 500 Ø140 25, 50, 75, 100, 125, 150, 175, 200, 250, 300 Ø160 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450, Ø180 25, 50, 75, 100, 125, 150, 175, 200, 250, 300 Ø250 50, 100, 150, 200, 250, 300 Ø300 - Bellows Material Max. Temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil: Rod end nut(standard) : 1pc I: Single knuckle joint Y: Double knuckle joint Auto switch Contact Model No contact Model A54 D-A54K F59 D-F59K A56 D-A56K F5P D-F5PK A64 D-A64K J59 D-J59K A90(V) D-A90(V)K J51 D-J51K A93(V) D-A93(V)K F9N D-F9N(V)K A96(V) D-A96(V)K F9P D-F9P(V)K F9B D-F9B(V)K Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Only for auto switch attached type. Special Order Nil : None TS: Multi-step Stroke Cylinder (Single rod) TW: Multi-step Stroke Cylinder (Double rod) TD: Tandem cylinder ASJ: Stroke adjustable type (in forward direction within 25mm) BSJ: Stroke adjustable type (in forward direction within 50mm) SV: Heat resistant cylinder SS: Stainless steel piston rod Type Lubricated, Non-Lubricated Low Hydraulic Pressure Air Turbine Oil VG32 Proof pressure 16kgf/cm 2 (1.6MPa) Max. operating pressure 9.9kgf/cm 2 (0.99MPa) Low Hydraulic Pressure L Type:5kgf/ cm 2 (0.5MPa) Min. operating pressure 0.8kgf/cm 2 (0.08MPa) 1kgf/cm 2 (0.1MPa) Ambient & uid temperature 5 ~ 60 Operating piston speed 50 ~ 500mm/sec 0.5 ~ 200mm/sec Cushion With cushion Without cushion Tolerance of thread KS class 2 Tolerance of stroke ~250 ST : ~ 1000 ST : ~ 1500 ST :

16 ACX series Extra-large Cylinder PNEUMATIC CYLINDER Ø350 to Ø450 is available. Excellent durability and performance. Various mounting styles. ACX - TC S 600 Series ACX : Double acting single rod extra-large cylinder Mounting style LB : Foot FA : Rod Side Flange FB : Head Side Flange CA : Single Clevis TC : Center Trunnion Cylinder stroke ~ 1000mm Bellows Material Max. Temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Cushion N : Without cushion R : Rod side cuhsion H : Head side cushion Nil : Both side cushion Bore size 350 : ø : ø : ø450 Rod end attachment Nil : None I : Single knuckle joint Y : Double knuckle joint Pneumatic Cylinder Double acting/single rod KLC series Low Friction Cylinder Action Double acting Air Proof pressure 16kgf/cm 2 (1.6MPa) Max. operating pressure 9.9kgf/cm 2 (0.99MPa) Min. operating pressure 1.0kgf/cm 2 (0.1MPa) Ambient & uid temperature 5 ~ 60 Operating piston speed 50~500mm/sec Tolerance of thread KS class 2 100mm 101~250mm Tolerance of stroke Max. stroke is1000mm. Contact us for longer strokes. 251~630mm ~1000mm KLC CA - 50 SM - 63 Series KLC : Low friction cylinder Mounting CA : Single Clevis Bore size ø50 ø63 Action SM : Single acting WM : Double acting Cylinder stroke Bore size Standard stroke Ø50 64 Ø63 78 Low friction type cylinder. Bore size:ø50, ø63. Single clevis mounting style. Smooth slow motion is possible. Action Max. operating pressure Min. operating pressure Ambiet & uid temperature Standard stroke Single/Double acting, Single rod Clean Air (for 5 FIlter & Oil remove filter) 9.0kgf/cm 2 (0.9MPa) 0.1kgf/cm 2 (0.01MPa) 5 ~ 60 Refer to the standard stroke table above Double acting/ Single rod Single acting/ Single rod Internal leakage Mounting direction 1.6 /min Horizontal KCC Co., Ltd. 15

17 KLCS series Labyrinth Cylinder Seal is not applied. That ensures smooth and sensitive movement to minor load variation. Due to the high efficiency, almost 100% of the supply pressure is used as driving force. It is also applicable with low pressure. Series KLCS : Labyrinth Cylinder Mounting Style CA : Single Clevis CB : Double Clevis Action Max. stroke Min. operating pressure Ambiet & uid temperature Lubrication Standard stroke PNEUMATIC CYLINDER KLCS CA Bore size Ø20 Ø30 Ø40 Ø50 Ø63 Ø80 Ø100 Stroke (mm) Bore Ø20 Ø30 Ø40 Ø50 Ø63 Ø80 Ø100 size Standard stroke Single acting Clean air (for 5 Filter & Oil remove filter) 300mm 0.02 ~ 0.4kgf/cm 2 (0.002 ~ 0.04MPa) -10 ~ 40 (Contact KCC for higher temperature type) Not required(do not lubricate) Refer to the stroke table above Single acting/single rod AFG series Compact Guide Cylinder Internal leakage 300 /min (ANR) (for Ø50 cylinder at 0.4kgf/cm 2 ) Attachment direction Vertical (within 15 from vertical axis is acceptable) AFG M 12 - S Built-in magnet and rubber bumper (Standard). Resists lateral loading and provides non-rotating motion. Sliding bearing and ball bearing are available depending on applications. Series AFG : Auto switch attached compact guide cylinder Bearing type M : Sliding Bearing L : Ball Bearing Bore size 12 Ø12 40 Ø40 16 Ø16 50 Ø50 20 Ø20 63 Ø63 25 Ø25 80 Ø80 32 Ø Ø100 Cylinder stroke Bore size Standard stroke 10, 0, 30, 40, 50, 75, Ø12, Ø Ø20, Ø25 20, 30, 40, 50, 100 Ø32, Ø40, 25, 50, 75, 100, 125, Ø50, Ø63, 150 Ø80, Ø100 Auto switches Contact Model No contact Model A72 D-A72K F7NV D-F7VNK A73 D-A73K F7PV D-F7PVK A-80 D-A80K F7BV D-F7BVK Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Double acting/single rod Double acting Action Ø12, Ø16 Ø25 ~ Ø100 Air Proof pressure 15kgf/cm 2 (1.5MPa) Max. operating pressure 10kgf/cm 2 (1.0MPa) Min. operating pressure 1.2kgf/cm 2 (0.12MPa) 1.0kgf/cm 2 (0.1MPa) Ambient & uid temperature 5 ~ 60 Operating piston speed 50 ~ 500mm/s Cushion Type Rubber bumper Lubrication Not required Tolerance of stroke

18 FM, FMD series Free Mount Cylinder PNEUMATIC CYLINDER With non-lubricated seal (standard). The multiple surface direct mounting with a square body enables spacesaving designs for equipment. Series Single rod free mount cylinder FM : (Without built-in magnet) Double rod free mount cylinder FMD : (Without built-in magnet) Port thread type Nil : M5 0.8 (Ø32 : Rc(PT) 1/8) G : G 1/8 (Only for Ø32) Bore size 6 : Ø6 10 : Ø10 16 : Ø16 20 : Ø20 25 : Ø25 32 : Ø32 FM S 15 D Action D : Double acting Auto switch Contact Model No contact Model A-90 D-A90(V)K F-9N(V) D-F9N(V)K A-93 D-A93(V)K F-9P(V) D-F9P(V)K A-96 D-A96(V)K F-9B(V) D-F9B(V)K Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N: 3, 4, 5...) Only for auto switch attached type. Pneumatic Cylinder Double acting/single rod Cylinder stroke Bore size Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Standard stroke 5, 10, 15, 20, 25, 30 5, 10, 15, 20, 25, 30, 40, 50 Bore size Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Proof pressure Air 10.5kgf/cm 2 (1.05MPa) Max. operating pressure 7kgf/cm 2 (0.7MPa) Min. operating pressure 1.2kgf/cm 2 (0.12MPa) 0.6kgf/cm 2 (0.06MPa) 0.5kgf/cm 2 (0.05MPa) Ambient & uid temperature 5~60 Operating piston speed 50 ~ 500mm/s Cushion Rubber bumper Lubrication Not required Tolerance of thread KS class 2 Tolerance of stroke Rod end thread Male thread (Standard) KCC Co., Ltd. 17

19 AF, ADF series Compact Cylinder PNEUMATIC CYLINDER Ideal for clamping, press-in and under short stroke condition. Can be installed even in narrow space with shorter length in axial thrust direction. Easy installation only with bolts. Excellent appearance after anodizing. Double acting/ Single rod Double acting/ Double rod Single acting/ Spring return Single acting/ Spring extend Series AF : Single rod compact cylinder (Without auto switch) AFW : Double rod compact cylinder (Without auto switch) ADF : Single rod compact cylinder (With auto switch) ADFW : Double rod compact cylinder (With auto switch) Type Nil : Single rod, non-lubricated (Standard) L : Low hydraulic pressure Mounting style Nil : Standard LB : Foot FA : Rod side flange FB : Head side flange CB : Double clevis Bore size 12 Ø12 50 Ø50 16 Ø16 63 Ø63 20 Ø20 80 Ø80 25 Ø Ø Ø Ø Ø40 Hole type A : Both end tapped & through hole (Standard) B : Through hole Cylinder stroke Action Standard stroke Bore size Single rod Double rod Ø12 5, 10, , 5, 10, , Ø Ø20 5, 10, 15, 20, 25, 5, 10, 15, 20, 25, Ø25 Ø32 30, 35, 40, 45, 50 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 AF - 80 A -S 30 30, 35, 40, 45, 50, 75, 100 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 Rod end thread Nil : Female thread N : Male thread Auto switch Contact Model No contact Model A-72 D-A72K F-7NV D-F7NVK A-73 D-A73K F-7PV D-F7PVK A-80 D-A80K F-7BV D-F7BVK A-90 D-A90(V)K F-9N(V) D-F9N(V)K A-93 D-A93(V)K F-9P(V) D-F9P(V)K A-96 D-A96(V)K F-9B(V) D-F9B(V)K Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Cushion Nil : None C : Rubber bumper Special Order Nil : None TS : Multi-step Stroke Cylinder (Single rod) TW : Multi-step Stroke Cylinder (Double rod) ASJ : Stroke Adjustable type (in forward direction within 10mm) BSJ : Stroke adjustable type (in forward direction within 20mm) S : Single acting spring return T : Single acting spring extend SV : Heat resistant cylinder E : Anti-lateral load Cylinder MS : Scraper Cylinder (Ø32 ~ Ø80) SV : Heat resistant cylinder SS : Stainless steel piston rod Proof pressure Max. operating pressure Ambient & uid temperature Operating piston speed Cushion Air 15.3kgf/cm 2 (1.53MPa) 10.2kgf/cm 2 (1.02MPa) -10 ~ 70 (No Freezing) 50 ~ 500mm/sec None Tolerance of thread KS class 2 Tolerance of stroke Rod end thread Female thread, Male thread For intermediate strokes 55~100, spacer of 5, 10, 20 mm will be used. Example: AF50B-S55 is produced by installing 20mm spacer in AF50B-S75. Low hydraulic pressure type and standard type have the same dimensions. 18

20 KBP series Booster Cylinder PNEUMATIC CYLINDER KBP - PP 150 / H Series KBP : Booster cylinder Type DI : Direct pressure type PP : Pre-pressure type Pneumatic Cylinder KBP-DI KBP-PP System converts air to high oil pressure for high prower applications. High output of air pressure, up to 8~36 times is available and can be integrated with hydraulic equipment. Bore size Oil pressure Stroke Output oil capacity Boosting ratio 80 80kgf/cm 2 (8MPa) 59cm 3 (cc) 1: Ø kgf/cm 2 (5.5MPa) mm 84cm 3 (cc) 1: kgf/cm 2 (4MPa) 115cm 3 (cc) 1: kgf/cm 2 (18MPa) 59cm 3 (cc) 1: kgf/cm 2 (12.5MPa) 84cm 3 (cc) 1: mm 90 90kgf/cm 2 (9MPa) 115cm 3 (cc) 1: Ø kgf/cm 2 (7MPa) 150cm 3 (cc) 1: kgf/cm 2 (12.5MPa) 141cm 3 (cc) 1: kgf/cm 2 (9MPa) mm 192cm 3 (cc) 1: kgf/cm 2 (7MPa) 251cm 3 (cc) 1: kgf/cm 2 (18MPa) 235cm 3 (cc) 1: kgf/cm 2 (12.5MPa) mm 339cm 3 (cc) 1: Ø kgf/cm 2 (7MPa) 603cm 3 (cc) 1: kgf/cm 2 (18MPa) 392cm 3 (cc) 1: kgf/cm 2 (12.5MPa) mm 565cm 3 (cc) 1: kgf/cm 2 (7MPa) 1005cm 3 (cc) 1:14 Ø300 only available for pre-pressure type. Auto switch Nil : None With built-in H : magnet Built-in magnet is not applicable to Ø300 type. Auto switch is attaching on tie rod of pneumatic cylinder. Select a hydraulic cylinder(kp70/140hc) with piston compact seal, without cushion for booster. CCTS series Air-hydro Converter Working oil Ambient & uid temperature Working uid Air pressure Lubrication Operating pressure Petroleum based fluid 5~60 Air Not required 0~7kgf/cm 2 (0~0.7MPa) CCTS It converts air pressure s to equivalent hydraulic pressure. The hydraulic pressure is used to operate an actuator. It solves the sticking and slipping problems with low speed operations. Series CCTS : Air-hydro converter Cylinder stroke 50, 100, 150, 200, 250, 300, 400, 450, 500, 600, 700, 800 Contact KCC for other stroke. Bore size Bore size Converter nominal size(mm) Air port size Oil port size 63 Ø63 Rc(PT)3/8 Rc(PT)3/4 100 Ø100 Rc(PT)1/2 Rc(PT)3/4 160 Ø160 Rc(PT)3/4 Rc(PT)3/4 Turbine Oil (40~100mm 2 /S) Proof pressure 10.5kgf/cm 2 (1.05MPa) Operating pressure 0~7kgf/cm 2 (0~0.7MPa) Ambient & uid temperature 5 ~ 50 KCC Co., Ltd. 19

21 KP140H series Standard Hydraulic Cylinder Tie rod type standard hydraulic cylinder. Double acting hydraulic cylinder for 70 or 140kgf/cm 2 with a bore from Ø40 to Ø250. High performance cushion to reduce shock when stopping. Various mounting styles available. (SD, LA, LB, FA, FB, FY, FZ, FC, FD, CA, CB, TC, TA) Double acting/ Single rod Figure 1.0 Double acting/ Double rod When modifying the positions, enter the symbols A, B, C, D in the dimensional drawings. KP140H - SD 40 B - B 300 Series KP140H Single rod KP140H W Double rod KP140HL With auto switch (Single rod) KP140HL W With auto switch (Double rod) Seal C : Compact seal (Standard) Nil : Basic seal B : Booster seal Seal material Nil : Nitrile Urethane(Standard) 1 : Nitrile rubber 2 : Urethane rubber 3 : Fluoric rubber The packing material of the compact seal is nitrile rubber. Mounting style SD LA FY 140kgf/cm 2 Standard Axial angle of foot Rod side rectangular ange FZ Head side rectangular ange FC Rod side square ange FD Head side square ange CA Single clevis CB Double clevis TC Center trunnion TA Rod side trunnion 70kgf/cm 2 LB Axial foot FA Rod side rectangular ange FB Head side rectangular ange Bore size Rod type Bore size B C 40 Ø40 Ø22 Ø18 50 Ø50 Ø28 Ø22 63 Ø63 Ø35 Ø28 80 Ø80 Ø45 Ø Ø100 Ø55 Ø Ø125 Ø70 Ø Ø140 Ø80 Ø Ø150 Ø85 Ø Ø160 Ø90 Ø Ø180 Ø100 Ø Ø200 Ø112 Ø Ø250 Ø140 Ø112 Cushion N : Without cushion B : With cushions on both ends R : With cushion on the rod side H : With cushion on the head side Cylinder stroke Bore size Max. stroke Ø40,Ø Ø63, Ø Ø Ø125~Ø Check buckling, as it varies depending on mounting style. Contact us for longer stroke. Port position Nil : A (Standard) B,C,D : Refer to Figure 1.0 Cushion valve position Nil : B (Standard) A,C,D : Refer to Figure 1.0 Belows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model A54 D-A54K F59 D-F59K A56 D-A56K F5P D-F5PK A64 D-A64K J59 D-J59K A90(V) D-A90(V)K J51 D-J51K A93(V) D-A93(V)K F9N D-F9N(V) K A96(V) D-A96(V)K F9P D-F9P(V) K F9B D-F9B(V) K Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Only for auto switch attached type. Type Bore size Standard Auto switch attached type C Rod B Rod C Rod B Rod Ø40, Ø50, Ø63, Ø80, Ø100, Ø125, Ø140, Ø150, Ø40, Ø50, Ø63, Ø80, Ø100 Ø160, Ø180, Ø200, Ø250 Operating pressure 70kgf/cm 2 (7.0MPa) 140kgf/cm 2 (14.0MPa) 70kgf/cm 2 (7.0MPa) 140kgf/cm 2 (14.0MPa) Max. Operating pressure Head side:90kgf/cm 2 (9.0MPa) Rod side:110kgf/cm 2 (11.0MPa) Head side:180kgf/cm 2 (18.0MPa) Rod side:180kgf/cm 2 (18.0MPa) Head side:90kgf/cm 2 (9.0MPa) Rod side:110kgf/cm 2 (11.0MPa) Head side:180kgf/cm 2 (18.0MPa) Rod side:180kgf/cm 2 (18.0MPa) Proof pressure 105kgf/cm 2 (10.5MPa) 210kgf/cm 2 (21.0MPa) 105kgf/cm 2 (10.5MPa) 210kgf/cm 2 (21.0MPa) Min. Operating pressure Head side 3kgf/cm 2 (0.3MPa), Rod side B rod 4.5kgf/cm 2 (0.45MPa), C rod 4kgf/cm 2 (0.4MPa) Operating piston speed Ø40 ~ Ø63 : 8~400mm/sec Ø80 ~ Ø125 : 8~300mm/sec Ø140 ~ Ø250 : 8~200mm/sec Ø40 ~ Ø63 : 8~400mm/sec Ø80 ~ Ø100 : 8~300mm/sec Ambient & uid temperature -10 ~ ~ 70 Cushion Working oil Metal pressure reducing type Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 100mm ~250mm ~630mm ~1000mm ~1600mm ~2000mm Tube material Carbon steel for machine structural use Stainless steel Mounting style SD, LA, (LB), (FA), (FB), FY, FZ, FC, FD, CA, CB, TC, TA Operating pressure: Max. allowable setting pressure for a relief valve while cylinder is operating. Max. Operating pressure: Maximum allowable pressure generated in a cylinder (surge pressure, etc.). Proof pressure: Test pressure for a cylinder can withstand without unreliable performance when returning to operating pressure. Min. Operating pressure: Minimum pressure for cylinder installed horizontally and operating without load. Operating pressure for the mounting styles in ( ) are 70kgf/cm 2. A longer thread length (A) is required when lock nut is applied on the end of the piston rod. 20

22 KP210H series High-pressure Hydraulic Cylinder HYDRAULIC CYLINDER KP210H - SD 40 B - B 300 Tie rod type high-pressure hydraulic cylinder. Double acting hydraulic cylinder for 2100kgf/cm 2 with a bore from Ø40 to Ø160. High performance cushion to reduce shock when stopping Various mounting styles available. (SD, LA, FA, FB, CA, CB, TC, TA) Double acting/ Single rod Double acting/ Double rod Series KP210H KP210H W KP210HL KP210HL W Single rod Double rod With auto switch (Single rod) With auto switch (Double rod) 210 kgf/ cm 2 Seal material Nil : Nitrile Urethane(Standard) 1 : Nitrile rubber 2 : Fluoric rubber Mounting style SD Standard CA LA FA FB Axial angle of foot Rod side flange Head side flange CB TC TA Single clevis Double clevis Center Trunnion Rod side Trunnion Bore size 40 Ø Ø Ø Ø Ø Ø Ø Ø Ø100 Cushion N : Without cushion B : With cushions on both ends R : With cushion on the rod side H : With cushion on the head side Cylinder stroke Bore size Max. stroke Ø40, Ø Ø63, Ø Ø100~Ø Check buckling, as it varies depending on the mounting style. Contact us for longer stroke. Mounting style for stroke over 801mm at Bore sizeø140~ø160 is flange mounting. Port position Nil : A (Standard) B,C,D : Refer to Figure 2.0 Cushion valve position Nil : B (Standard) A,C,D : Refer to Figure 2.0 Figure 2.0 When modifying the positions, enter the symbols A, B, C, D in the dimensional drawings. Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : Rod end nut (Standard) I : Single knuckle joint Y : Double knuckle joint Auto switch Contact Model No contact Model A54 D-A54K F59 D-F59K A56 D-A56K F5P D-F5PK A64 D-A64K J59 D-J59K A90(V) D-A90(V)K J51 D-J51K A93(V) D-A93(V)K F9N D-F9N(V) K A96(V) D-A96(V)K F9P D-F9P(V) K F9B D-F9B(V) K Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Only for auto switch attached type. Hydraulic Cylinder Type Bore size Operating pressure Max. Operating pressure Proof pressure Min. Operating pressure Operating piston speed Standard Auto switch attached type KP210H KP210HL Ø40, Ø50, Ø63, Ø80, Ø100, Ø125, Ø140, Ø kgf/cm 2 (21.0MPa) Head side 250kgf/cm 2 (24.5MPa) Rod side 270kgf/cm 2 (26.5MPa) 321.4kgf/cm 2 (31.5MPa) Head side 4.59kgf/cm 2 (0.45MPa), Rod side 3.06kgf/cm 2 (0.3MPa) 8~300mm/sec Ambient & uid temperature -10 ~ ~ 70 Cushion Working oil Metal pressure reducing type Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke Tube material Mounting style 0~100mm ~1000mm Carbon steel for machine structural use SD, LA, FA, FB, CA, CB, TA, TC Stainless steel Operating pressure: Max. allowable setting pressure for a relief valve while cylinder is operating. Max. operating pressure: Maximum allowable pressure generated in a cylinder (surge pressure, etc.) Proof pressure: Test pressure a cylinder can withstand without unreliable performance when returning to operating pressure. Min. operating pressure: Minimum pressure for a cylinder installed horizontally and operating without load. A longer thread length (A) is required when lock nut is applied on the end of the piston rod.,, 101~250mm ~1600mm ,, 251~630mm ~2000mm KCC Co., Ltd. 21

23 KPC70H/140H series Mill Type Hydraulic Cylinder HYDRAULIC CYLINDER Cylinder for heavy machinery including steel mills. Double acting hydraulic cylinder for 70/140kgf/cm 2 with a bore size from Ø40 to Ø250. Heavy-duty type resistant to surge pressure, vibration and impact. Various mounting styles available. (SD, LA, FA, FB, CA, TC) Double acting/ Single rod KPC70H - SD 40 A - B 300 Series KPC70H Single 70kgf/cm 2 KPC140H rod 140kgf/cm 2 Seal material Nitrile Urethane Nil : (Standard) 1 : Nitrile rubber 2 : Urethane rubber 3 : Fluoric rubber Mounting style SD : Standard LA : Axial angle of foot FA : Rod side flange FB : Head side flange CA : Single clevis TC : Center Trunnion Bore size Rod type Bore size A B 40 Ø40 Ø28 Ø22 50 Ø50 Ø35 Ø28 63 Ø63 Ø45 Ø35 80 Ø80 Ø56 Ø Ø100 Ø71 Ø Ø125 Ø90 Ø Ø140 Ø100 Ø Ø150 Ø112 Ø Ø160 Ø125 Ø Ø180 Ø140 Ø Ø200 Ø160 Ø Ø250 Ø180 Ø140 Cushion N : Without cushion B : With cushions on both ends R : With cushion on the rod side H : With cushion on the head side Cylinder stroke All mounting styles accept TC type TC mounting style Bore size Max. stroke Bore size Max. stroke Ø40~Ø63 0~2000 Ø40~Ø80 101~2000 Ø80~Ø160 51~2000 Ø100, Ø ~2000 Ø180~Ø ~2000 Ø140~Ø ~2000 Ø224, Ø ~2000 Check buckling, as it varies depending on mounting style. Contact us for longer stroke. Port position Nil : A (Standard) B,C,D : Refer to Figure 3.0 Cushion valve position Nil : B (Standard) A,C,D : Refer to Figure 3.0 Figure 3.0 The standard port position is A, and the standard cushon valve position is B. When modifying the positions, enter the symbol shown in ther dimensional drawings. Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment type Nil : Rod end nut (Standard) I : Single knuckle joint Y : Double knuckle joint Rod end thread type Nil Type 1 (Standard) 2 Type 2 The end thread of type 2 is longer than that of type 1 and has a lock nut. The cylinder with type 1 rod end thread will be provided if the customer does not specify the type. Port type Nil Y Type X (Standard) Type Y Weld ange Thread ange Z Type Z Cover screw The cylinder with type X port will be provided if the customer does not specify the type. Type KPC70H KPC140H Bore size Ø40, Ø50, Ø63, Ø80, Ø100, Ø125, Ø140, Ø160, Ø200, Ø224, Ø250 Operating pressure 70kgf/cm 2 (7.0MPa) 140kgf/cm 2 (14.0MPa) Max. Operating pressure 140kgf/cm 2 (14.0MPa)) 230kgf/cm 2 (23.0MPa) Proof pressure 170kgf/cm 2 (17.0MPa) 280kgf/cm 2 (28.0MPa) Min. Ø40~Ø140 3kgf/cm 2 (0.3MPa) Operating pressure Ø160~Ø250 5kgf/cm 2 (0.5MPa) Operating Ø40~Ø140 10~500mm/sec piston speed Ø160~Ø250 20~500mm/sec Ambient & uid temperature -10 ~ 80 (No freezing) Cushion Metal pressure reducing type Working oil Petroleum-based fluid Tolerance of thread KS class 2 0~100mm +0.8, 0 Tolerance of stroke 101~250mm +1.0, 0 251~630mm ~1000mm +1.4, 1001~1600mm +1.6, 1601~2000mm Mounting style SD, LA, FA, FB, CA, TC Accesory Bellows Rod end attachment Other J : Nylon Tarpaulin, K : Neoprene Cloth Single knuckle joint (I-type), Double knuckle joint (Y-type) Rod end nut Operating pressure: Max. allowable setting pressure for a relief valve while cylinder is operating. Min. operating pressure: Minimum pressure for cylinder installed horizontally and operating without load. 22

24 KPC210H series High-pressure Mill Type Hydraulic Cylinder KPC210H - SD 40 B - B 300 HYDRAULIC CYLINDER Cylinder for heavy machinery including steel mills. Double acting hydraulic cylinder for 210kgf/cm 2 with a bore from Ø40 to Ø250. Heavy-duty type resistant to surge pressure, vibration and impact. Various mounting styles available. (LA, FA, FB, CA, TC) Double acting/ Single rod Double acting/ Double rod Series KPC210H KPC210HW Single rod Double rod Seal material : Material Nil : Nitrile Urethane (Standard) 1 : Nitrile rubber 2 : Fluoric rubber 210kgf/cm 2 Mounting style SD : Standard LA : Axial angle of foot FA : Rod side flange FB : Head side flange CA : Single clevis TC : Center Trunnion Bore size Bore size 40 Ø40 50 Ø50 63 Ø63 80 Ø Ø Ø Ø Ø Ø Ø Ø250 Cushion N : Without cushion B : With cushions on both ends R : With cushion on the rod side H : With cushion on the head side Cylinder stroke Bore size Max. stroke Ø40, Ø Ø63, Ø Ø100~Ø Check buckling, as it varies depending on mounting style. Contact us for longer stroke. Port position Nil : A (Standard) B,C,D,E,F : Refer to Figure 4.0 Cushion valve position Nil : B (Standard) A,C,D,E,F : Refer to Figure 4.0 Check valve position Nil : F (Standard) A,B,C,D,E : Refer to Figure 4.0 Figure 4.0 The standard port position is A, check valve position is F and the standard cushion valve position is B. When modifying the positions, enter the symbol shown in ther dimensional drawings. Bellows Material Max. ambient temperature Nil Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110 Rod end attachment Nil : None I : Single knuckle joint Hydraulic Cylinder Specications Model Bore size Operating pressure Proof pressure Min. Operating pressure Operating piston speed Ambient & uid temperature Working oil KPC210H Ø40, Ø50, Ø63, Ø80, Ø100, Ø125, Ø140, Ø160, Ø180, Ø200, Ø kgf/cm 2 (21.0MPa) 315kgf/cm 2 (31.5MPa) 12~18kgf/cm 2 (1.2~1.8MPa) 10~300mm/sec -10~80 (Use Viton seal when temperature is over 100) Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 100mm ~1000mm ,, 101~250mm ~1500mm , 251~650mm , 1501~2000mm Bellows J : Nylon Tarpaulin, K : Neoprene Cloth Accesory Rod end attachment Single knuckle joint (I-type) Operating pressure: Max. allowable setting pressure for a relief valve while cylinder is operating. Min. Operating pressure: Minimum pressure for a cylinder installed horizontally and operating without load. KCC Co., Ltd. 23

25 KTC70HP series HYDRAULIC CYLINDER Telescopic Cylinder KTC 70HP - LA 20 - A 1500 Telescopic single acting constant speed cylinder. 2-stage stroke cylinder requires less space for installation in the axial direction. Both stroke ends are provided with xed cushions. Series KTC70HP : Telescopic cylinder Mounting style LA : Axial angle of foot LT : Base mounting axial angle of foot FA : Rod side flange FB : Head side flange CA : Single clevis TA : Rod side trunnion TB : Head side trunnion Type Type Bore size 1 stage 2 stage 10 Type 10 Ø63 Ø45 20 Type 20 Ø90 Ø65 30 Type 30 Ø110 Ø80 40 Type 40 Ø125 Ø90 50 Type 50 Ø140 Ø100 Rod end thread length(dimension A) Type A (Standard) B (Semistandard) Type 10 25mm 35mm Type 20 35mm 45mm Type 30 40mm 55mm Type 40 45mm 60mm Type 50 52mm 72mm Cylinder stroke Type Stroke Type 10 50~1700 Type 20 50~2500 Type 30 50~3100 Type 40 50~3100 Type 50 50~3100 Check buckling, as it varies depending on mounting style. Contact us for longer stroke. Max. stroke is 50mm. Port position Nil : C, G (Standard) A,B,D,E,F,H : Refer to Figure 5.0 & 5.1 according to mounting style. Air vent position Nil : A (Standard) B,C,D,E,F,G,H : Refer to Figure 5.0 & 5.1 according to mounting style. Mounting style LA, LT Figure 5.0 The standard port positions are C and G, and the standard air vent position is A. Mounting style FA, FB, CA, TA, TB Figure 5.1 The standard port positions are A and E, and the standard air vent position is C. Note) Locate the ports and air vent at a distance of 90 or 180 from one another. Bore size Type Type 10 Type 20 Type 30 Type 40 Type 50 Operating pressure 1 Stage Ø63 Ø90 Ø110 Ø125 Ø140 2 Stage Ø45 Ø65 Ø80 Ø90 Ø100 70kgf/cm 2 (7MPa) Max. Operating pressure Rod side:150kgf/cm 2 (15MPa) Head side:90kgf/cm 2 (9MPa) Proof pressure Rod side:210kgf/cm 2 (21MPa) Head side:140kgf/cm 2 (14MPa) Min. Operating pressure Rod side:6kgf/cm 2 (0.6MPa) Head side:3kgf/cm 2 (0.3MPa) Operating piston speed 10m/min 9m/min 8.4m/min 7.7m/min 7.1m/min Min.Operating piston speed temperature Ambient temperature Working oil 0.06m/min -5 ~ 80 (No freezing) -10 ~ 50 Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 0~ ~ ~ ~ Mounting style LA, LT, FA, FB, CA, TA, TB 60kgf/cm 2 is standard pressure when cylinder is in reverse operation with common speed. Operating pressure: Max. allowable setting pressure for a relief valve while cylinder is operating. Max. Operating pressure: Maximum allowable pressure generated in a cylinder (surge pressure, etc.) Proof pressure: Test pressure a cylinder can withstand without unreliable performance when returning to operating pressure. Min. Operating pressure: Minimum pressure for a cylinder installed horizontally and operating without load. 24

26 KP140HS series HYDRAULIC CYLINDER Steel Compact Hydraulic Cylinder KP140HS - SD 40 - S 40 KP140HS SD80-S40 KP140HS LA50-S30N Compact hydraulic cylinder with steel tube. Double acting hydraulic cylinder for 140kgf/cm 2 with a bore from Ø20 to Ø125. Appropriate for pressing, clamping and short -stroke operations. Cylinder designed with a shorter length than a conventional cylinder. Series Series Type KP140HS Single rod KP140HS W Double rod Auto switch KP140HS HL attached type (Single rod) Auto switch KP140HS HL W attached type (Double rod) Tube Operating material pressure Steel SUS 140 kgf/ cm 2 Seal material Material Nil Nitrile Urethane (Standard) 1 Nitrile rubber 2 Fluoric rubber Mounting style SD : Standard LA : Axial angle of foot Bore size Bore size 30 Ø30 40 Ø40 50 Ø50 63 Ø63 80 Ø Ø Ø125 Cylinder stroke Bore size Standard stroke Max. stroke Ø32 50 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 5,10, 15, 20, 25, 30, 35, 40, 45, Check buckling, as it varies depending on mounting style. Contact us for longer stroke. We have female thread, standard stroke type in stock. Rod end thread Nil : Female thread (Standard) N : Male thread Auto switch Contact Model No contact Model A72 D-A72K F7NV D-F7NVK A73 D-A73K F7PV D-F7PVK A80 D-A80K F7BV D-F7BVK Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Hydraulic Cylinder Only for auto switch attached type. Modle KP140HS Double acting/ Single rod Double acting/ Double rod Bore size Max. Operating pressure Ø20, Ø25, Ø30, Ø40, Ø50, Ø63, Ø80 140kgf/cm 2 (14.0MPa) Proof pressure 210kgf/cm 2 (21.0MPa) Min. Operating pressure 3kgf/cm 2 (0.3MPa) Operating piston speed 10~300mm/sec Ambient & uid temperature -10 ~ 70 Working oil Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 0~+0.8mm Contact us for delivery of auto switch attached type. KCC Co., Ltd. 25

27 KP125/160A series Aluminum Compact Cylinder HYDRAULIC CYLINDER KP125A - H SD 50 - S 40 N S KP125A SD63-S20 KP125A H SD40-S50 Series KP125A Single rod 125kgf/cm 2 KP125A W Double rod 125kgf/cm 2 KP160A Single rod 160kgf/cm 2 Double rod type is inavailable for KP160A series. Seal material Material Nitrile Urethane Nil (Standard) 2 Urethane rubber Magnet Nil : Without magnet H : With built-in magnet Cylinder with built-in magnet and without built-in magnet have the same dimensions. Bore size Bore size 20 Ø20 25 Ø25 32 Ø32 40 Ø40 50 Ø50 63 Ø63 80 Ø80 Cylinder stroke Bore size Ø20 Ø25 Ø32 Ø40 Standard stroke 10, 15, 20, 25, 30, 40, 50 Ø50 Ø63 Ø80 - Max. stroke Check buckling, as it varies depending on mounting style. Contact us for longer stroke. We have female thread, standard stroke type in stock. Rod end thread Female thread Nil (Standard) N Male thread Auto switch Contact Model No contact Model Z72 D-Z72K Y59A D-Y59AK Z73 D-Z73K Y7PK D-Y7PK Z76 D-Z76K Y59B D-Y59BK Z80 D-Z80K Z82 D-Z82K Only for auto switch attached type. Number of auto switches Nil : 2 pcs S : 1 pc N : N pcs (N:3,4,5...) Only for auto switch attached type. Compact hydraulic cylinder with aluminum tube. Double acting hydraulic cylinder for 125/160kgf/cm 2 with a bore from Ø20 to Ø80. Easy to equip with auto switch. Excellent appearance and identical dimensions as KP140HS. Double acting/ Single rod Double acting/ Double rod Type KP125A KP160A Bore size Ø20, Ø25, Ø32, Ø40, Ø50, Ø63, Ø80 Max. Operating pressure 125kgf/cm 2 (12.5MPa) 160kgf/cm 2 (16.0MPa) Proof pressure 188kgf/cm 2 (18.8MPa) 240kgf/cm 2 (24.0MPa) Min. Operating pressure 3kgf/cm 2 (0.3MPa) Operating piston speed 8~10mm/s Ambient & uid temperature -10 ~ 70 Working oil Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 0~+0.8mm 26

28 KP35R series HYDRAULIC CYLINDER Rotary Cylinder KP35R - 1 FA Series KP35R : Rotary cylinder (35kgf/cm 2 ) Type 1 : Standard 2 : With magnet Bore size 30 Ø30 40 Ø40 50 Ø50 63 Ø63 80 Ø80 Cushion valve position Nil : B (Standard) A,C,D : Refer to Figure 6.0 Figure 6.0 Hydraulic Cylinder Rack-and-pinion rotary cylinder. Rotary cylinder for 35kgf/cm 2 with a bore from Ø30 to Ø80. The rotating angle can be adjusted with a range of ±5 Various mounting styles available. Mounting style SD : Standard FA : Top flange FB : bottom flange Rotating angle 90 : : 180 Port position Nil : A (Standard) B,C,D : Refer to Figure 6.0 When modifying the positions, enter the symbol shown in the dimensional drawings. (SD, FA, FB) Type KP35R Bore size Variation Ø30, Ø40, Ø50, Ø63, Ø80 Rack and pinion type Rotating angle 90, 180 Angle adjustment ±5 Rated torque (at 35kgf/cm 2 ) Max. operating pressure Proof pressure Min. operating pressure Ambient & uid temperature Working oil Ø30:60Nm, Ø40:106Nm, Ø50:220Nm, Ø63:436Nm, Ø80:840Nm, 35kgf/cm 2 (3.5MPa) 50kgf/cm 2 (5MPa) 5kgf/cm 2 (0.5MPa) 10 ~ 60 Petroleum-based fluid Tolerance of thread KS class 2 Mounting style SD, FA, FB KCC Co., Ltd. 27

29 KH series Hydraulic Machinery Cylinder Agricultural Machinery, Special purpose vehicle HYDRAULIC CYLINDER KH02 - SD 40 - S 1000 Standard agricultural and industrial hydraulic cylinder Hydraulic cylinder with a bore from Ø40 to Ø400. One side installation is possible depending on piping. Various mounting styles available. (Both end ring mounting, CA ring mouting, FA, FB) Double acting/ Single rod Series KH01 : Both end ring mounting cylinder (for agriculture) KH001 : CA ring mouniting cylinder (for industry) KH02 : General industry cylinder KH03 : General industry large cylinder Seal material KH01, KH001 Urethane rubber Nil (Standard) 1 Nitrile rubber KH02, KH03 Nil U Packing (Standard) 1 V Packing Mounting style Both end ring for KH01 SD mounting CA ring mounting for KH001 Rod side flange FA1 (Rectangular) Rod side flange FA2 (Round) for KH02 Head side flange FB1 (Rectangular) Head side flange FB2 (Round) FA Rod side flange for KH03 FB Head side flange Bore size Bore size KH01 KH02 KH03 KH Ø40 50 Ø50 60 Ø60 70 Ø70 80 Ø80 90 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø400 Tube type Nil : Drawing tube (Steel) (Standard) H : Honing pipe Only available for Ø40~Ø100. Honing pipe is used as standard for cylinder over Ø125. Cylinder stroke Bore size Max. stroke Ø40~Ø Check buckling, as it varies depending on mounting style. Contact us for longer stroke. Piping type A:Both side piping (Standard) Nil B Head side piping Only available for KH01, KH001, KH03 type. Piping position Nil : A (Standard) B, C, D : Refer to Figure 7.0 Figure 7.0 Type KH01, KH001, KH02, KH03 Max. operating pressure 100kgf/cm 2 (10.0MPa) Proof pressure 200kgf/cm 2 (20.0MPa) Min. Operating pressure 5kgf/cm 2 (0.5MPa) Temperature range -10 ~ 60 Working oil Petroleum-based fluid Tolerance of thread KS class 2 Tolerance of stroke 0 ~ 0.8mm (KH02, KH03) 28

30 KT100 series Solenoid Valve (3 Port Direct Acting/No Lubrication) PNEUMATIC SOLENOID VALVE KT GL - L Function 110 N.C 120 N.O Electrical entry GL: Lead wire & lamp Direction of electrical entry L Base Nil Without base KT100-3GL-L Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. M B With base Pneumatic Solenoid Valve KT100-3GL-M Type KT110 KT120 Air, Inert gas Effective sectional (0.016) 0.28 (0.016) area S (Cv) (0.020) 0.36 (0.020) Operating pressure 0~7kgf/cm 2 (0~0.7MPa) 0~6kgf/cm 2 (0~0.6MPa) Max. operating frequency Response time (at 0.5MPa) Lubrication Manual override Power consumption DC Allowable voltage Ambient & uid temperature Coil insulation 20 cycle/sec 5ms Not required Non-locking push type (Standard) 1.0W (42mA) ±10% rated voltage -5~50 (No freezing) Class B Impact/Vibration resistance 150/30 m/s 2 Proctection structure Dust proof Weight 12.5g KT100-3GL-MB Excellent durability with its non-lubricated type. Minimized installing area with its small size. Perfect for controlling system by PLC or computer with its low consuming current type. KCC Co., Ltd. 29

31 KS105/210/320/530/640 series PNEUMATIC SOLENOID VALVE Solenoid Valve (5 Port Pilot/No Lubrication) R-mark certification (Reliability certification): KIMM (Korea Institute of Machinery & Materials) certified that the product always keeps the same quality and performance as it has in the beginning under given environmental conditions. KS105S-2GL Series 105 : M5 210 : 1/8 320 : 1/4 530 : 3/8 640 : 1/2 KS 320 S - 1 GL - Port type Nil : Rc(PT) (Standard) G : G Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry Manual override Nil : Non-locking push type (Standard) L : Locking type Lock type not availble for KS105 & KS210 series. Locking type KS210D-2GL Function S D H I J Single acting Double acting Closed center Pressure center Exhaust center Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. KS320S-2D KS530H-2G KS640H-2D Excellent durability with its non-lubricated type. Minimized installing area with its small size. Perfect for controlling system by PLC or computer with its low consuming current type. Type S D H / I / J Air, Inert gas Port size M5, Rc(PT)1/8, 1/4, 3/8, 1/2 G1/8, 1/4, 3/8, 1/2 Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5MPa) Lubrication Manual override Power consumption DC AC Allowable voltage Ambient & uid temperature Coil insulation KS105 : 3.6 (0.2) KS(G)210 : 12.6 (0.6) KS(G)320 : 19 (1.0) KS(G)530 : 45 (2.5) KS(G)640 : 65 (3.6) 1.5~9kgf/cm 2 (0.15~0.9MPa) KS105 : 5 cycle/sec KS(G)210 : 5 cycle/sec KS(G)320 : 5 cycle/sec KS(G)530 : 5 cycle/sec KS(G)640 : 3 cycle/sec KS105 : 25ms KS(G)210 : 25ms KS(G)320 : 30ms KS(G)530 : 30ms KS(G)640 : 30ms Not required Non-locking push type (Standard), Locking type KS105 : Under development KS(G)210 : 9.0 (0.5) KS(G)320 : 14 (0.8) KS(G)530 : 38 (2.1) KS(G)640 : 50 (2.8) 2~9kgf/cm 2 (0.2~0.9MPa) KS105 : Under development KS(G)210 : 3 cycle/sec KS(G)320 : 3 cycle/sec KS(G)530 : 3 cycle/sec KS(G)640 : 2 cycle/sec KS105 : Under development KS(G)210 : 35ms KS(G)320 : 40ms KS(G)530 : 40ms KS(G)640 : 40ms KS105 : 2.5W / KS(G)210 : 2.5W KS(G)320 : 2.8W / KS(G)530 : 2.8W KS(G)640 : 2.8W KS105 : 3.8/3.3VA (50/60Hz) / KS(G)210 : 3.5/3.0VA (50/60Hz) KS(G)320 : 4.5/3.6VA (50/60Hz) / KS(G)530 : 4.5/3.6VA (50/60Hz) KS(G)640 : 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~ 60 Class F KS105 : Ø2.5~Ø40 / KS(G)210 : Ø12~Ø63 Applicable cylinder KS(G)320 : Ø32~Ø100 / KS(G)530 : Ø32~Ø125 KS(G)640 : Ø50~Ø160 KS105 80g 120g - KS(G) g 180g 200g Weight KS(G) g 350g 450g KS(G) g 490g 530g KS(G) g 620g 850g 30

32 KS524/534 series(namur) Solenoid Valve (5 Port Pilot/No Lubrication) PNEUMATIC SOLENOID VALVE KS 524 S - 2 GL - KS524S-2GL 2GL Port type Nil : Rc(PT) (Standard) G : G Series & Port size & Body width 524 : Inlet port : 1/4 Exhaust port : 1/8 Body width 24.2mm 534 : 1/4 Body width 26.5mm Function S D Single acting Double acting Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry Manual override Nil : Non-locking push type (Standard) L : Locking type Locking type Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Pneumatic Solenoid Valve Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. KS534D-2D Excellent durability with its non-lubricated type. Perfect for controlling system by PLC or computer with its low consuming current type. Large capacity valve can be used in combination with large pneumatic actuator. Type S D Air, Inert gas Port size Rc(PT) 1/4, G 1/4 Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5MPa) Lubrication Manual override Power consumption Allowable voltage KS(G)524 : 19 (1.0) KS(G)534 : 31.2 (1.7) 1.5~9kgf/cm 2 (0.15~0.9MPa) 5 cycle/sec 30ms Not required Non-locking push type (Standard), Locking type DC 2.8W AC Ambient & uid temperature Coil insulation 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~60 Class F KS(G)524 : Ø32~Ø100 Applicable cylinder KS(G)534 : Ø32~Ø125 KS(G) g 316g Weight KS(G) g 410g KCC Co., Ltd. 31

33 KS328 series Solenoid Valve (5 Port Pilot/No lubrication) R-mark certification (Reliability certification): KIMM (Korea Institute of Machinery & Materials) certified that the product always keeps the same quality and performance as it has in the beginning under given environmental conditions. KS328S-2D Function S D Single acting Double acting Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. PNEUMATIC SOLENOID VALVE KS 328 S - 1 GL - - Electrical entry Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. KS328D-2GL 2GL Manual override Nil : Non-locking push type (Standard) L : Locking type Locking type Option Nil : Without Sub Base WIth sub Base port B02 : Rc(PT)1/4 With sub Base port B03 : Rc(PT)3/8 G02 : With sub Base port G1/4 G03 : With sub Base port G3/8 KS328H-2G With sub Base Excellent durability with its non-lubricated type. Minimized installing area with its small size. Large capacity valve can be used with large actuator. Type S D Air, Inert gas Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8 Effective sectional area Smm 2 (Cv) 19 (1.0) Operating pressure 1.5~9kgf/cm 2 (0.15~0.9MPa) Max. operating frequency 5 cycle/sec Response time (at 0.5MPa) 30ms Lubrication Manual override Power consumption Allowable voltage Not required Non-locking push type (Standard), Locking type DC 2.8W AC Ambient & uid temperature Coil insulation Applicable cylinder 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~ 60 Class F Ø32 ~ Ø100 Weight 400g 500g 32

34 KS760 series Solenoid Valve (5 Port Pilot/No Lubrication) PNEUMATIC SOLENOID VALVE KS 760 S GL V - Port type Nil : Rc(PT) (Standard) G : G Electrical entry Function KS760S-2D S D H I J Single acting Double acting Closed center Pressure center Exhaust center Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. Pneumatic Solenoid Valve KS760D-2D Port size 15: Rc(PT) 1/2 20: Rc(PT) 3/4 Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Coil direction V Vertical Horizontal H *Only for single acting & double acting type. Manual override Nil : Non-locking push type (Standard) L : Locking type Locking type Mounting position of coil, upper type(standard) and lateral type(h-type) is selectable according to its mounting space. High- ow valve adopts subplate piping method. Applicable to large pneumatic cylinder (ø140 ~ ø300) Common mounting hole size. Other brand product is compatible replacable. Type S D H / I / J Air, Inert gas Port size Rc(PT) 1/2, 3/4, G 1/2, 3/4 Effective sectional area Smm 2 (Cv) 92mm 2 (5.0) 82mm 2 (4.4) Operating pressure 1.5~10kgf/cm 2 (0.15~1.0MPa) Response time (at 0.5MPa) 200ms 300ms Lubrication Manual override Power consumption Allowable voltage Ambient & uid temperature Coil insulation Not required Non-locking push type(standard), Locking type DC 6.0W AC Applicable cylinder 5.0/4.0VA (50/60Hz) ±10% rated voltage 5 ~ 60 Class F Ø140~Ø300 Weight 2000g 2150g 2300g KCC Co., Ltd. 33

35 KS341/342 series Solenoid Valve (3 Port Pilot/No Lubrication) PNEUMATIC SOLENOID VALVE KS 342 S - 3 GL - Port type Nil : Rc(PT) (Standard) G : G Series KS(G)341 : 1/8 KS(G)342 : 1/4 Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Manual override Nil : Non-locking push type (Standard) L : Locking type Locking type KS341S-2G Function Single S acting, N.C Single O acting, N.O D Double acting Electrical entry Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector KS342D-2GL Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. Excellent durability with its non-lubricated type. Minimized installing area with its small size. Perfect for controlling system by PLC or computer with its low consuming current type. Type S / O D Air, Inert gas Port size KS(G)341 : Rc(PT) 1/8, G 1/8 KS(G)342 : Rc(PT) 1/4, G 1/4 Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5MPa) Lubrication Manual override Power consumption Allowable voltage DC AC Ambient & uid temperature Coil insulation KS(G)341 : 12.6 (0.6) KS(G)342 : 19 (1.0) 1.5~9kgf/cm 2 (0.15~0.9MPa) 5 cycle/sec KS(G)341 : 25ms KS(G)342 : 30ms Not required Non-locking push type (Standard), Locking type KS(G)341 : 2.5W KS(G)342 : 2.8W KS(G)341 : 3.5/3.0VA (50/60Hz) KS(G)342 : 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~ 60 Class F KS(G)341 : Ø12~Ø63 Applicable cylinder KS(G)342 : Ø32~Ø100 KS(G) g 156g Weight KS(G) g 320g 34

36 KPS542 series Solenoid Valve (3 Port Poppet/No Lubrication) External pilot 1/8 Port type Nil : Rc(PT) (Standard) G : G PNEUMATIC SOLENOID VALVE KPS GL - Electrical entry KPS542R-03-2D Use external pilot type in the following cases. For vacuum or for low pressure 0.2MPa or less. Consult us for use in a vacuum hold application. When having P port downsized in diameter. When using A port as the atmospheric releasing port, e.g. air blower Function Nil O R N.C N.O External pilot Port size 02 : 1/4 03 : 3/8(Standard) Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. Pneumatic Solenoid Valve KPS GL Excellent durability with its non-lubricated type. A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Perfect for controlling system by PLC or computer with its low consuming current type. Applications 1. Blow-off valve 2. Pressure release valve X Port X Port 3. Selector valve 4. Valve for vacuum X Port X Port Vacuum pump Vacuum filter Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Air, Inert gas Port size Rc(PT) 1/4, 3/8, G1/4, 3/8 Effective sectional area Smm 2 (Cv) 45 (2.4) Pilot type Internal pilot External pilot Operating pressure Max. operating frequency Response time (at 0.5MPa) Lubrication Manual override Power consumption Allowable voltage Ambient & uid temperature Coil insulation Applicable cylinder Weight Manual override Nil : Non-locking push type (Standard) L : Locking type 2.0~8.0kgf/cm 2 (0.2~0.8MPa) Supply pressure Pressure of external pilot Locking type -1.0~8.0kgf/cm 2 (-0.1~0.8MPa) Same as operating pressure (Min. 2kgf/cm 2 0.2MPa) 5 cycle/sec 30ms Not required Non-locking push type (Standard), Locking type DC 2.8W AC 4.5/3.6 VA (50/60Hz) ±10% rated voltage 5~60 Class F ø32~ø g Vacuum pad 5. Divider Valve 6. Single-acting cylinder drive 7. Double-actign cylinder drive 8. Double-actign cylinder drive (Exhaust center) X Port Tank Tank Exhaust Center KCC Co., Ltd. 35

37 KCAS series Solenoid Valve (2, 3 Port Direct Acting/One Touch Fitting) PNEUMATIC SOLENOID VALVE KCAS 2 - C6-3 G KCAS2-C6-3G Function 2 2 Port 3 3 Port Port type M5 : M5 01 : Rc(PT)1/8 C4 : Ø4 One touch fitting C6 : Ø6 One touch fitting (Standard) Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry GL G Lead wire & lamp Lead wire Direct acting type Normally close type KCAS3-C6-2G C6-2G Burn proof structure, long service life High speed response Suitable to use with constant delivery machine. Custom made of 2Port, 3Port N.O, at 5kgf/cm 2 available. Type KCAS 2(2Port) KCAS 3(3Port) Port size Ori ce Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 5kgf/cm 2 ) Power consumption Compressed air, Inert gas M5, Rc(PT) 1/8, Ø4,Ø6 (Standard) One touch tting Ø0.6mm (Standard) 0.26 (0.014) 0~7kgf/cm 2 (0~0.7MPa) 10 cycle/sec 20ms Function 2/2 Way type 3/2 Way type Seal material Body material NBR Aluminium (Standard), Brass DC 2.8W AC Allowable voltage Ambient & uid temperature Coil insulation Weight 3.8/3.3VA (50/60Hz) ±10% rated voltage 5~60 Class F 58g 36

38 KJAS series Solenoid Valve (2, 3 Port Direct Acting) PNEUMATIC SOLENOID VALVE KJAS D - 02 KJAS39-2D Port type Nil : Rc(PT) (Standard) G : G Function 2 2 Port 3 3 Port Orifice 9 : Ø1.5 (Standard) 1 : Ø1 Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry Seal material Nil : NBR(Standard) V : Viton Number of valve on manifold block 02 : 2 pcs 03 : 3 pcs ~ 10 : 10 pcs Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Pneumatic Solenoid Valve KJAS29-2D 2D Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. Specications KJAS39-2D-05 Manifold type Direct acting type Normally close type Burn proof structure, long service life High speed response Suitable to use with constant delivery machine. Easy multi-station adaptation Custom made of 2Port, 3Port N.O, at 5kgf/cm 2 available. Type KJAS 29 (2Port) KJAS 39 (3Port) Air, Water, Oil Port size A, P : Rc(PT) 1/8, R:M5 Ori ce Ø1.5mm(Standard), Ø1.0mm Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5MPa) Body material Power consumption Function Seal material Individual type Manifold type DC AC Allowable voltage Ambient & uid temperature Coil insulation Weight 1.7 (1.0), 0.65(0.04) 0~7kgf/cm 2 (0~0.7MPa) 10 cycle/sec 20ms 3/2Way Type, 2/2 Way Type NBR, Viton Brass Aluminium 2.8W, 6W 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~ 60 Class F 140g KCC Co., Ltd. 37

39 KST series Solenoid Valve (2, 3 Port Direct Acting) PNEUMATIC SOLENOID VALVE KST D - - KST20-2D Port type Nil : Rc(PT) (Standard) G : G Function Port N.C 3 Port N.C Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry Seal material Nil : NBR(Standard) V : Viton Number of valve on manifold block 02 : 2 pcs 03 : 3 pcs ~ 10 : 10 pcs Seal material 0 : ø0.9 (Standard) Lead wire & lamp Lead wire, lamp & surge suppressor Lead wire DIN coil & DIN connector DIN coil, connector, lamp & surge suppressor DIN coil & metal DIN connector Vertical plug connector Horizontal plug connector Level of explosion-proof 2G EEx mt4 2D IP65 T 130 DIN coil + DIN connector (UL Approval) DIN coil, connector, lamp & surge suppressor (UL Approval) M, GU, GP and DEXT4 type not available for KS105, KS210 and KS341 series. Direct acting type Normally close type KST Burn proof structure, long service life High speed response Suitable to use with constant delivery machine. Custom made of 2Port, 3Port N.O, at 5kgf/cm 2 available. Easy multi-station adaptation Beautiful appearance Free mount type Manual override is available Type KST20(2Port) KST30(3Port) Air, Inert gas Port size Rc(PT) 1/8, G 1/8 Ori ce Ø0.9mm (Standard) Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5MPa) Function Seal material Body material Manual override Power consumption Allowable voltage DC AC Ambient & uid temperature Coil insulation Weight 0.65 (0.04) 0~8kgf/cm 2 (0~0.8MPa) 10 cycle/sec 20ms 3/2Way Type, 2/2 Way Type NBR, Viton Aluminium Push button(standard), Lever(Option) 2.8W, 6W 4.5/3.6VA (50/60Hz) ±10% rated voltage 5 ~60 Class F 130g 38

40 KS3135 series Solenoid Valve (3 Port Direct Acting/Metal Seal) PNEUMATIC SOLENOID VALVE KS G Port type Nil : Rc(PT) (Standard) G : G Body nominal size 3 : Body size 3/8 Port size 03 : 3/8 04 : 1/2 Voltage 1 : AC100/110V 50/60Hz 2 : AC200/220V 50/60Hz KS G Direct acting type Large capacity valve can be used in combination with large actuator. Non-lubrication type and with dust proof metal sealing. Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation. Type KS 3135 G-type (Flying Lead) Air, Vacuum, Inert gas Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2 Effective sectional area Smm 2 (Cv) Operating pressure Max. operating frequency Response time (at 0.5kgf/cm 2 ) Lubrication Power consumption Allowable voltage Ambient temperature temperature Coil insulation Weight Rc(PT) 3/8 37(2.0) Rc(PT) 1/2 43(2.4) 0~10kgf/cm 2 (0~1MPa) 5 cycle/sec 30ms Not required Starting : 100/90VA (50/60Hz) Maintaining : 20/14VA (50/60Hz) ±10% rated voltage -20 ~ 50 5 ~ 60 Class B 860g Pneumatic Solenoid Valve KCC Co., Ltd. 39

41 KS4000 series Solenoid Valve (5 Port Direct Acting/Metal Seal) PNEUMATIC SOLENOID VALVE KS G Port type Nil : Rc(PT) (Standard) G : G Port size 03 : 3/8 04 : 1/2 Function 1 Single acting Voltage 1 : AC100/110V 50/60Hz 2 : AC200/220V 50/60Hz KS G 2 Double acting 3 Closed center 4 Exhaust center For ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA. Type KS4130 KS4230 / KS4330 / KS4430 Air, Vacuum, Inert gas KS G 042G Direct acting type Large capacity valve can be used in combination with large actuator. Non-lubrication type and with dust proof metal sealing. Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation. Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2 Effective sectional Rc(PT) 3/8 43 (2.4) area Smm 2 (Cv) Rc(PT) 1/2 49 (2.72) Operating pressure 0~10kgf/cm 2 (0~1MPa) Max. operating frequency 5 cycle/sec 3 cycle/sec Response time (at 5kgf/cm 2 ) 30ms Lubrication Power consumption Allowable voltage Not required Starting : 100/90VA (50/60Hz) Maintaining : 20/14VA (50/60Hz) ±10% rated voltage Ambient temperature temperature Coil insulation -20 ~ 50 5 ~ 60 Class B Weight 1440g 1830g 40

42 KSP3135 series Solenoid Valve (3 Port Pilot/Metal Seal) PNEUMATIC SOLENOID VALVE KSP G Port type Nil : Rc(PT) (Standard) G : G Port size 03 : 3/8 04 : 1/2 KSP G 50 3G Function Nil : Internal Pilot R : External Pilot Specications Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Air, Vacuum, Inert gas Pneumatic Solenoid Valve Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2 Effective sectional area Smm 2 (Cv) Operating pressure Rc(PT) 3/8, G 3/8 33(1.8) Rc(PT) 1/2, G 1/2 43(2.4) 1.5~10kgf/cm 2 (0.15~1MPa) Pilot type Large capacity valve, can be used in combination with large actuator. Non-lubrication type and with dust proof metal sealing. Max. operating frequency Response time (at 0.5MPa) Lubrication DC AC DC AC 3 cycle/sec 5 cycle/sec 60ms 30ms Not required Manual override Push button Power consumption Allowable voltage DC 4.6W AC 13/10VA (50/60Hz) ±10% rated voltage Ambient temperature temperature Coil insulation Weight -10 ~ 50 5 ~ 60 Class F 650g KCC Co., Ltd. 41

43 KSP4000 series PNEUMATIC SOLENOID VALVE Solenoid Valve (5 Port Pilot/Metal Seal) KSP G KSP G 031G Port type Nil : Rc(PT) (Standard) G : G Function 1 2 Single acting (S) Double acting (D) Function Nil : Internal Pilot R : External Pilot Port size 03 : 3/8 04 : 1/2 In case of ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA. Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electric entry G : Lead wire Type Single Double Air, Vacuum, Inert gas Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2 Effective sectional area Smm 2 (Cv) Operating pressure 43(2.39) 49(2.72) 1.5~10kgf/cm 2 (0.15~1MPa) KSP D 031D Max. operating frequency Response time (at 0.5MPa) DC 3 cycle/sec AC 5 cycle/sec 3 cycle/sec DC 60ms AC 30ms Pilot type Large capacity valve, can be used in combination with large actuator. Non-lubrication type and with dust proof metal sealing. Lubrication No required DC 4.6W Power consumption AC 13/10VA (50/60Hz) Manual override Push button Allowable voltage ±10% rated voltage Ambient temperature -10 ~ 50 temperature Coil insulation 5 ~ 60 Class F Weight 1280g 1600g 42

44 KT307 series Solenoid Valve (3 Port Poppet/Universal Port Type) PNEUMATIC SOLENOID VALVE K T G - - KT307 G-TYPE (Standard) Type T : Direct piping type O : Manifold type Port type Nil : Rc(PT) (Standard) G : G Function Function Nil V ac Air N.C Port size 01 : 1/8 02 : 1/4 Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V V Function Vacuum+Air 1Port-Vacuum 3Port-Air Electrical entry G : Lead wire 300mm (Standard) D : DIN connector Contact us for longer lead wire. Option Nil : Without bracket B : With bracket Number of valve on manifold block 02 : 2 pcs 03 : 3 pcs ~ 19 : 19 pcs 20 : 20 pcs Only available for KO Series. Pneumatic Solenoid Valve V u u m N.O Air + Vacuum 1Port-Air 3Port-Vacuum Pilot exhaust type 2 : Common exhaust 3 : Individual exhaust Only available for KO Series. KT D Individual exhaust Option Air, Vacuum, Inert gas Port size Rc(PT) 1/8, 1/4, G1/8, 1/4 Effective sectional area Smm 2 (Cv) Operating pressure Air Max. operating frequency Response time (at 5 kgf/cm 2 ) Lubrication 3.2 (0.18) 0~9kgf/cm 2 (0~0.9MPa) Vacuum 10~760Torr (1kPa~100kPa abs.) 10 cycle/sec 20ms Not required Manual override Power consumption Push button DC 4.6W AC Allowable voltage Ambient temperature temperature Coil insulation Weight 13/10VA (50/60Hz) ±10% rated voltage -10~50 5~80 Class F 162g Applications Type 3 Port N.C valve 3 Port N.O valve Divider valve Solenoid off Common exhaust Solenoid on A single valve with 6 valve functions. (Universal porting type) Continuous high frequency operation available. (Max.10C/S) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Burn proof structure, long service life. Type 2 Port N.C valve 2 Port N.O valve Solenoid off Solenoid on Selector valve KCC Co., Ltd. 43

45 KT317 series Solenoid Valve (3 Port Poppet/Universal Port Type) PNEUMATIC SOLENOID VALVE KT G KT G (Standard) Port type Nil : Rc(PT) (Standard) G : G Function Function Nil V V ac u u m Air N.C N.O Port size 02 : 1/4 03 : 3/8 W X Function Vacuum+Air 1Port-Vacuum 3Port-Air Air + Vacuum 1Port-Air 3Port-Vacuum Voltage 1 : AC 100/110V 50/60Hz 2 : AC 200/220V 50/60Hz 3 : DC 24V 4 : DC 12V Custom made of AC24V, AC48V, DC48V, DC100V available. Electrical entry G : Lead wire 300mm (Standard) D : DIN connector Contact us for longer lead wire. Air, Vacuum, Inert gas Manual override Push button KT D A single valve with 6 valve functions. Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8 Effective sectional area 11 (0.6) Smm 2 (Cv) Operating pressure Air Vacuum Max. operating frequency Response ON time (at 5kgf/cm 2 ) OFF Lubrication 0~9kgf/cm 2 (0~0.9MPa) 10~760Torr (1kPa~100kPa abs.) 10 cycle/sec 7ms 6.5ms Not required Power consumption DC AC Allowable voltage Ambient temperature temperature Coil insulation Weight G-TYPE D-TYPE 11W 35/29VA (50/60Hz) ±10% rated voltage -10~50 5~80 Class F 420g 500g (Universal porting type) Continuous high frequency operation available. (Max. 10C/S) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Burn proof structure, long service life. Applications Type 3 Port N.C valve 3 Port N.O valve Divider valve Solenoid off Solenoid on Type 2 Port N.C valve 2 Port N.O valve Selector valve Solenoid off Solenoid on 44

46 KA(B)V105/210/320/530/640 series PNEUMATIC SOLENOID VALVE Operated Valve (5 Port Pilot/No Lubrication) K A V 320 S KBV105S KBV210D Air supply direction A : Horizontal B : Vertical Port type Nil : Rc(PT) (Standard) G : G Port size 105 : M5 210 : 1/8 320 : 1/4 530 : 3/8 640 : 1/2 Function S D H I J Single acting Double acting Closed center Pressure center Exhaust center Pneumatic Solenoid Valve Type S D H / I / J Air, Inert gas Port size M5, Rc(PT)1/8, 1/4, 3/8, 1/2 G1/8, 1/4, 3/8, 1/2 KA(B)V320H KA(B)V530S External pilot port size Effective sectional area Smm 2 (Cv) Operating pressure Pilot pressure Max. operating frequency Ambient & uid temperature Weight KA(B)V(G)105, 210 : M5 KA(B)V(G)320, 530, 640 : Rc(PT) 1/8, G1/8 KA(B)V(G)105 : 3.6 (0.2) KA(B)V(G)210 : 12.6 (0.6) KA(B)V(G)320 : 19 (1.0) KA(B)V(G)530 : 45 (2.5) KA(B)V(G)640 : 65 (3.6) 1.5~9kgf/cm 2 (0.15~0.9MPa) 5 cycle/sec 2~10kgf/cm 2 (0.2~1MPa) 5 ~ 60 KA(B)V(G)320 : 14 (0.8) KA(B)V(G)530 : 38 (2.1) KA(B)V(G)640 : 50 (2.8) 2~9kgf/cm 2 (0.2~0.9MPa) KA(B)V(G)320 : 3 cycle/sec KA(B)V(G)530 : 3 cycle/sec KA(B)V(G)640 : 3 cycle/sec KA(B)V(G)105 54g 68g - KA(B)V(G) g 120g - KA(B)V(G) g 240g 340g KA(B)V(G) g 380g 420g KA(B)V(G) g 510g 750g KA(B)V640D Excellent durability with its non-lubricated type. (KA(B)V105/210/320)Easy to mount and to maintain with its light weight and small size. Large capacity valve(ka(b)v530/640), suitable for large actuator. Fast response with its low pressure pilot. Easy to install if horizontal type(kav) or vertical type(kbv) is selected depending on installation direction. KCC Co., Ltd. 45

47 KA(B)V524/534 series PNEUMATIC SOLENOID VALVE Operated Valve (5 Port Pilot/No Lubrication) K A V 524 S Air supply direction A : Horizontal B : Vertical Port type Nil : Rc(PT) (Standard) B : G KA(B)V524S Port size & Body width 524 : Inlet port 1/4, Exhaust port 1/8, Width 24.2mm 534 : 1/4, Width 26.5mm Function S D Single acting Double acting Type S D Air, Inert gas KA(B)V534D Port size Rc(PT) 1/4, G1/4 External pilot port size Rc(PT) 1/8, G1/8 Excellent durability with its non-lubricated type. Large capacity valve, can be used for large actuator. Fast response with its low pressure pilot. Easy to install if horizontal type(kav) or vertical type(kbv) is selected depending on installation direction. Effective sectional area Smm 2 (Cv) KA(B)V(G)524 : 19mm 2 (1.0) KA(B)V(G)534 : 35mm 2 (2.0) Operating pressure 0.15~0.9MPa (1.5~9kgf/cm 2 ) Pilot pressure 0.2~1.0MPa (2~10kgf/cm 2 ) Max. operating frequency 5 cycle/sec Ambient & uid temperature 5 ~60 Weight KA(B)V(G) g 252g KA(B)V(G) g 320g 46

48 KA(B)V341/342 series Operated Valve (3 Port Pilot/No Lubrication) PNEUMATIC SOLENOID VALVE K A V 341 D Air supply direction B : Vertical (Standard) A : Horizontal (Under development) Port type Nil : Rc(PT) (Standard) G : G KA(B)V341D Port size 341 : 1/8 342 : 1/4 Function Function S O D Single acting N.C Single acting N.O Double acting Pneumatic Solenoid Valve KA(B)V342S Excellent durability with its non-lubricated type. Easy to mount and to maintain with its light weight and small size Fast response with its low pressure pilot Easy to install if horizontal type(kav) or vertical type(kbv) is selected depending on installation direction. Type S / O D Air, Inert gas Port size Rc(PT) 1/8, 1/4 G 1/8, 1/4 External pilot port size KA(B)V(G)341 : M5 KA(B)V(G)342 : Rc(PT)1/8, G1/8 Effective sectional area Smm 2 (Cv) Operating pressure Pilot pressure Max. operating frequency Ambient & uid temperature Weight KA(B)V(G)341 : 12.6 (0.6) KA(B)V(G)342 : 19 (1.0) 1.5~9kgf/cm 2 (0.15~0.9MPa) 2~10kgf/cm 2 (0.2~1MPa) 5 cycle/sec 5 ~60 KA(B)V(G)341 78g 102g KA(B)V(G) g 220g KCC Co., Ltd. 47

49 KPA(B)542 series Operated Valve (3 Port Poppet/No Lubrication) PNEUMATIC SOLENOID VALVE KP A KPA542 External pilot(vertical) 1/8 External pilot(horizontal) 1/8 Air supply direction A : Horizontal (Standard) B : Vertical Type A is standard while type B is semi standard. Port type Nil : Rc(PT) (Standard) B : G Function Function Nil (N.C, N.O compatible) N.C N.O When using external pilot type in vacuum, only KPA type is available KPB542 When using external pilot type in vacuum, only KPA type is available Port size 02 : 1/4 03 : 3/8 A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Possible to use in vacuum Refer to KPS542 series for applications. Air, Inert gas Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8 External pilot port size Rc(PT) 1/8 Effective sectional area Smm 2 (Cv) 45mm 2 (2.4) Internal Pilot 2.0~8.0kgf/cm 2 (0.2~0.8MPa) Operating pressure -1.0~2.0kgf/cm External Pilot (-0.1~0.2MPa) Pilot pressure Max. operating frequency Ambient & uid temperature Weight Identical to operating pressure (Min. 2kgf/cm 2, 0.2MPa) 5 cycle/sec 5~60 290g 48

50 KSA3135 series PNEUMATIC SOLENOID VALVE Operated Valve (3 Port Direct Acting/Metal Seal) KSA Port type Nil : Rc(PT) (Standard) G : G Port size 03 : 3/8 04 : 1/2 Body nominal size 3 : Body size 3/8 KSA3135 Air, Vacuum, Inert gas Port size Rc(PT) 3/8, 1/2, G 3/8, G1/2 Pilot port size Rc(PT) 1/8 Effective sectional area Smm 2 (Cv) Rc(PT) 3/8 37(2.0) Rc(PT) 1/2 43(2.4) Pneumatic Solenoid Valve Direct acting type. Large capacity valve can be used for large actuator. Non-lubrication type and with dust proof metal sealing. Operating pressure Pilot pressure Max. operating frequency Lubrication Manual override Ambient temperature temperature Weight 0~10kgf/cm 2 (0~1MPa) 1~10kgf/cm 2 (0.1~1MPa) 5 cycle/sec Not required Push button type available (Option) -20 ~ 50 5 ~ g KCC Co., Ltd. 49

51 KSA4000 series Operated Valve (5 Port Direct Acting/Metal Seal) PNEUMATIC SOLENOID VALVE KSA Port type Nil : Rc(PT) (Standard) G : G Body nominal size 30 : Body size 3/8 Function Function 1 Single acting(s) Port size 03 : 3/8 04 : 1/2 2 Double acting (D) KSA4130 In case of ISO standard notation, 1:P, 2:B, 3:EB, 4:A, 5:EA. KSA4230 Direct acting type Large capacity valve can be used for large actuator. Non-lubrication type and with dust proof metal sealing. Due to the balance spool type neither of the ports being supplied with pressure will affect the valve operation. Type KSA4130 KSA4230 Air, Vacuum, Inert gas Port size Rc(PT) 3/8, 1/2, G 3/8, 1/2 Pilot port size Rc(PT) 1/8 Effective sectional Rc(PT) 3/8 43 (2.4) area Smm 2 (Cv) Rc(PT) 1/2 49 (2.72) Operating pressure 0~10kgf/cm 2 (0~1MPa) Pilot pressure 1~10kgf/cm 2 (0.1~1MPa) Max. operating frequency 5 cycle/sec 3 cycle /sec Lubrication Not required Manual override Push button type available (Option) Ambient temperature -20 ~50 temperature 5 ~60 Weight 750g 860g 50

52 KTA307 series Operated Valve (3 Port Poppet/Universal Port Type) Air Pilot Port (Standard) PNEUMATIC SOLENOID VALVE K T A 307 V Type T : Direct piping type O : Manifold type Function Function Function Option Air supply direction A : Vertical B : Horizontal Nil V ac Air N.C V Vacuum+Air 1Port-Vacuum 3Port-Air KTA307 B port can be accessed if the plug in B pilot port is being inserted into A port. Port type Nil : Rc(PT) (Standard) G : G V u u m Port size 01 : 1/8 02 : 1/4 N.O Option Nil : Without bracket B : With bracket Air + Vacuum 1Port-Air 3Port-Vacuum Number of valve on manifold block 02 : 2 pcs 03 : 3 pcs ~ 19 : 19 pcs 20 : 20 pcs Only for KOA(B) Series. Pneumatic Solenoid Valve Induvidual exhaust Exhaust port type 2 : Common exhaust 3 : Individual exhaust Only for KOA(B) Series. Common exhaust A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Possible to use in vacuum. Type Air Vacuum Air, Vacuum, Inert gas Port size Rc(PT) 1/8, 1/4, G 1/8, 1/4 Effective sectional area Smm 2 (Cv) 3.2mm 2 (0.18) Operating pressure 0~10kgf/cm 2 10~760Torr (0~1MPa) (1 ~100kPa abs.) Pilot pressure 2~10kgf/cm 2 (0.2~1MPa) Pilot port size 1/8 Lubrication Ambient temperature temperature Weight Applications Not required -10~50 5~80 140g Type 3 Port N.C valve 3 Port N.O valve Divider valve Solenoid off Solenoid on Type 2 Port N.C valve 2 Port N.O valve Selector valve Solenoid off Solenoid on KCC Co., Ltd. 51

53 KTA317 series Operated Valve (3 Port Poppet/Universal Port Type) PNEUMATIC SOLENOID VALVE KTA Port type Nil : Rc(PT) (Standard) G : G Port size 02 : 1/4 03 : 3/8 KTA317 A single valve with 6 valve functions. (Universal porting type) With the structure of a valve preventing xation and resistant to dust it operates perfectly. Possible to use in vacuum. Function Function Nil V Vacuum Air N.C N.O W X Function Vacuum+Air 1Port - Vacuum 3Port - Air Air+Vacuum 1Port - Air 3Port - Vacuum Type Air Vacuum Air, Vacuum Port size Rc(PT) 1/4, 3/8, G 1/4, 3/8 Effective sectional area Smm 2 (Cv) 11mm 2 (0.6) Operating pressure 0~10kgf/cm 2 (0~1MPa) 10~760 Torr (1~100kPa abs.) Pilot pressure 1~10kgf/cm 2 (0.1~1MPa) Pilot port size 1/8 Lubrication Not required Ambient temperature -10~50 temperature Weight 5~80 200g Applications Type 3 Port N.C valve 3 Port N.O valve Divider valve Solenoid off Solenoid on Type 2 Port N.C valve 2 Port N.O valve Selector valve Solenoid off Solenoid on 52

54 KMF series Manifold Block PNEUMATIC SOLENOID VALVE KMF KMF KMF Port type Nil : Rc(PT) (Standard) G : G Series 0100 : Manifold block for KT100(3Port) 0500 : Manifold block for KS105(5Port) 1000 : Manifold block for KS210(5Port) 2000 : Manifold block for KS320(5Port) 3000 : Manifold block for KS530(5Port) 4000 : Manifold block for KS640(5Port) 2341 : Manifold block for KS341(3Port) 2342 : Manifold block for KS342(3Port) Station & Accessory 02 : 2 stations 03 : 3 stations 04 : 4 stations 05 : 5 stations ~ 10 : 10 stations S.P : Spare plate Spare Plate (Material:SCP1) Manifold Gasket (Material:NBR) Pneumatic Solenoid Valve Model : KMF2000-S.P KMF KMF KMF Accessory of manifold block Model Port size Stations KCC CKD SMC SY TPC YPC PARKER KMF-0100 M5 2 ~ 20 KT KMF /8 2 ~ 10 KS105(M5) 4KA-110 VZ-3120 SV-51 - SF KMF /4 1 ~ 10 KS210(1/8) 4KA-210 VZ-5120 SV-110 DS2010 SF2000 PHS510 KMF /4 1 ~ 20 KS320(1/4) - VF-3130 SV-210 DS3000 SF4000 PHS520 KMF /8 1 ~ 20 KS530(3/8) - VF-5120 SV-310 DS5000 SF5000 PHS530 KMF /2 2 ~ 10 KS640(1/2) - - SV-420 DS5000 SF6000 PHS540 KMF /4 2 ~ 10 KS341(1/8) KMF /4 2 ~ 10 KS342(1/4) - VF DS KCC Co., Ltd. 53

55 KOR/KAND series Logic Valve PNEUMATIC SOLENOID VALVE KOR KAND Port type Nil : Rc(PT) (Standard) G : G Body nominal size 01 : 1/8 (16mm) 02 : 1/4 (16mm) Port size 01 : 1/8 02 : 1/4 KOR01-01 OR (SHUTTLE) VALVE Type KOR01-01 KOR02-02 KAND01-01 Proof pressure Operating pressure Optimum operating pressure differential Ambient & uid temperature Air, Inert gas 15kgf/cm 2 (1.5MPa) 1~10kgf/cm 2 (0.1~1MPa) 0.5kgf/cm 2 (50kPa) 5 ~ 60 Port size Rc(PT)1/8 Rc(PT)1/4 Rc(PT)1/8 Effective sectional area Weight 54g 62g 60g KAND01-01 AND VALVE KOR KAND Excellent durability with its non-lubricated type. Relay valves to control pneumatic signal lines. KOR type - 3 ported check valve with one output and 2 pneumatic input ports. Output always supplied by high pressure inlet. KAND type - 3 port valve with one output and 2 pneumatic input ports. Only when both input ports are supplied with air, the air ows to the output port. When air pressure differs, pressure in the lower amount ows to the output port. 54

56 KACV series Check Valve PNEUMATIC SOLENOID VALVE KACV KACV Port type Nil : Rc(PT) (Standard) G : G Bore size 2000 : ø : ø : ø40 Port size 01 : 1/8 02 : 1/4 03 : 3/8 04 : 1/2 06 : 3/4 10 : 1 KACV Type KACV KACV KACV Air Proof pressure 15kgf/cm 2 (1.5MPa) Operating pressure 0.3~10kgf/cm 2 (0.03~1MPa) Ambient & uid temperature 5 ~ 60 Port size Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 3/8 Effective sectional area 28mm 2 94mm 2 Weight 40g 170g Pneumatic Solenoid Valve KACV Free flow Excellent durability with its non-lubricated type. Large capacity valve can be used for large actuator. Quick response time with low cracking pressure. Type KACV KACV KACV Air Proof pressure 15kgf/cm 2 (1.5MPa) Operating pressure 0.3~10kgf/cm 2 (0.03~1MPa) Ambient & uid temperature 5 ~ 60 Port size Rc(PT) 1/2 Rc(PT) 3/4 Rc(PT) 1 Effective sectional area 110mm 2 220mm 2 250mm 2 Weight 170g 870g KCC Co., Ltd. 55

57 KVM100 series PNEUMATIC SOLENOID VALVE 2, 3 Port Mechanical Valve KVM R KVM KVM Port type Nil : Rc(PT) (Standard) G : G Number of port 2 : 2 Port 3 : 3 Port Type of actuator 00 : Standard 01 : Roller lever 02 : One-way lever 30 : Push button 33 : Push button (Flat type) 34 : Selector KVM S KVM G Stem type 0 : Long 1 : Short Short stem is available for actuator type 01 and type 02. Long stem is available for actuator type 30, type 33 and type 34. Option S : Hard steel roller R : Red (Button color) G : Green (Button color) KVM R KVM Function KVM 120(1) KVM (S) KVM (S) KVM KVM Function KVM 130(1) KVM (S) KVM (S) KVM KVM Compressed air Port size Rc(PT) 1/8, G 1/8 Effective sectional area Smm 2 (Cv) Operating pressure Lubrication Ambient temperature Weight(Standard type) 2.5 (0.14) 0~9.9kgf/cm 2 (0~0.99MPa) Not required 0~60 98g Operating Point of Mechanical Valve P.T. : Working distance from the free position to the operating position of the actuator. O.T. : Working distance from the operating position to the operating limit of the actuator. T.T. : Working distance from the free position to the operating limit of the actuator. F.O.F. : The power for operating actuator from the free position to the operating limit position. At 5kgf/cm 2 Model F.O.F P.T. O.T. T.T. KVM kgf 1.5mm 1.5mm 3.0mm KVM kgf 1.5mm 1.5mm 3.0mm KVM kgf 1.5mm 1.5mm 3.0mm KVM kgf 1.5mm 1.5mm 3.0mm KVM ,02(S) 1.2kgf 3.2mm 2.3mm 5.5mm KVM ,02(S) 1.2kgf 3.2mm 2.3mm 5.5mm KVM , 33(R, G) 2.5kgf 6.0mm 1.6mm 7.6mm KVM , 33(R, G) 2.5kgf 6.0mm 1.6mm 7.6mm KVM kgf KVM kgf

58 KVM200/KVMS200 series PNEUMATIC SOLENOID VALVE 2, 3 Port Mechanical Valve KVM S KVMS KVMS KVM KVM R Series KVM : Mechanical valve KVMS : Mechanical valve 3 Port (for both N.O, N.C) Port type Nil : Rc(PT) (Standard) G : G Number of port 2 : 2 Port 3 : 3 Port Stem type 0 : Standard type Type of actuator 00 : Standard 01 : Roller lever 02 : One-way lever 30 : Push button 33 : Push button (Flat type) 34 : Selector Option S : Hard steel roller R : Red (Button color) G : Green (Button color) Pneumatic Solenoid Valve KVM G KVM Function KVM KVM (S) KVM (S) KVM KVM Function KVM(S) KVM (S) KVM (S) KVM KVM Function KVMS KVMS KVMS (S) KVMS KVMS Compressed air Port size Rc(PT) 1/4, G 1/4 Effective sectional area Smm 2 (Cv) Operating pressure Lubrication Ambient temperature Weight(Standard type) 19 (1.0) 0~9.9kgf/cm 2 (0~0.99MPa) Not required 0~60 136g Operating Point of Mechanical Valve P.T. : Working distance from the free position to the operating position of the actuator. O.T. : Working distance from the operating position to the operating limit of the actuator. T.T. : Working distance from the free position to the operating limit of the actuator. F.O.F. : The power for operating actuator from the free position to the operating limit position. At 5kgf/cm 2 Model F.O.F P.T. O.T. T.T. KVM kgf 3.0mm 2.0mm 5.0mm KVM(S) kgf 3.0mm 2.0mm 5.0mm KVM (S) 2.4kgf 6.5mm 4.5mm 11mm KVM(S) (S) 2.4kgf 6.5mm 4.5mm 11mm KVM (S) 2.2kgf 7.0mm 5.0mm 12mm KVM(S) (S) 2.2kgf 7.0mm 5.0mm 12mm KVM , 33(R, G) 5.2kgf 4.9mm 1.6mm 6.5mm KVM(S) , 33(R, G) 5.2kgf 4.9mm 1.6mm 6.5mm KVM kgf KVM(S) kgf KCC Co., Ltd. 57

59 KVM300 series 5 Port Mechanical valve PNEUMATIC SOLENOID VALVE KVM S KVM KVM Port type Nil : Rc(PT) (Standard) G : G Number of port 5 : 5 Port Type of actuator 00 : Standard 01 : Roller lever 02 : One-way lever 30 : Push button 33 : Push button (Flat type) 34 : Selector Stem type 0 : Standard type Option S : Hard steel roller R : Red (Button color) G : Green (Button color) KVM S KVM Compressed air Port size Rc(PT) 1/4, G 1/4 Effective sectional area Smm 2 (Cv) Operating pressure Lubrication Ambient temperature Weight(Standard type) 19 (1.0) 0~9.9kgf/cm 2 (0~0.99MPa) Not required 0~60 260g KVM KVM Function KVM KVM (S) KVM (S) KVM KVM Operating Point of Mechanical Valve P.T. : Working distance from the free position to the operating position of the actuator. O.T. : Working distance from the operating position to the operating limit of the actuator. T.T. : Working distance from the free position to the operating limit of the actuator. F.O.F. : The power for operating actuator from the free position to the operating limit position. At 5kgf/cm 2 Model F.O.F P.T. O.T. T.T. KVM kgf 1.0mm 2.0mm 3.0mm KVM (S) 0.8kgf 2.2mm 4.0mm 6.2mm KVM (S) 0.7kgf 2.4mm 4.6mm 7.0mm KVM , 33(R, G) 2.1kgf 4.8mm 1.7mm 6.5mm KVM kgf

60 K series Small Mechanical Valve PNEUMATIC SOLENOID VALVE Type K2P K3P K4P K4PP K4PPX Air, Inert gas Port size Effective sectional area Smm 2 (Cv) Operating pressure Male thread:rc(pt)1/8, Female thread:m (0.08) 2.5(0.12) 0~9kgf/cm 2 (0~0.9MPa) K2P K3P Proof pressure Max. operating frequency Lubrication Type of actuator Push Button Spring Return 13.5kgf/cm 2 (1.35MPa) 5 cycle/sec Not required Double Push Button Holding Type Push-Pull Button Holding Type Number of port 2 N/C 3 N/C 5 Pre-Stroke 0.8mm Stroke 2.4mm Main Stroke 0.8mm Over Stroke 0.8mm Ambient & uid temperature 0 ~ 60 Accessory LOCK NUT(110-21A) 1 Each 2 Each 1 Each LOCK WASHER(100-35) Weight 35g 30g 66g 71g 68g Pneumatic Solenoid Valve K4P K4PP K4PPX K2V, K3V K2VR, K3VR K2P K3P K2V K2VR K3V K4P K4PP K4PPX K4V K4VR K3VR K4V K4VR Type K2V K3V K2VR K3VR K4V K4VR Port size Effective sectional area Smm 2 (Cv) Operating pressure Proof pressure Max. operating frequency Air, Inert gas Male thread:rc(pt)1/8, Female thread:m (0.08) 2.5(0.12) 0~9kgf/cm 2 (0~0.9MPa) 13.5kgf/cm 2 (1.35MPa) 5 cycle/sec Lubrication Not required Type of actuator Pinned Lever Holding Type Spring Return Type Holding Type Spring Return Type Number of port 2 Port 3 Port 2 Port, N.C 3 Port, N.C 5 Port Pre-Stroke 0.8mm Stroke 2.4mm Main Stroke 0.8mm Over Stroke 0.8mm Ambient & uid temperature 0 ~ 60 Accessory LOCK NUT(110-21A) 1 Each LOCK WASHER(100-35) Weight 30g 66g KCC Co., Ltd. 59

61 KHP series PNEUMATIC SOLENOID VALVE Hand Push Pull Valve KHP 320 S B Port type Nil : Rc(PT) (Standard) G : G Number of port 342 : 3 Port 320 : 5 Port Port size 01 : 1/8 02 : 1/4 Option Nil : Without bracket B : With bracket Function Function KHP342 KHP320 KHP342S-02 KHP342BV-02 S D Spring Return Push Pull Option Bracket BV (Vertical) Air Return (Standard) AV (Horizontal) Air Return (Semistandard) Bracket only availble for KHP320/342S/D type. (Option : Bracket 1pc, Screw for bracket 2 pcs) BV KHP342D-02-B KHP320D-02-B AV Port Direction Type S D AV / BV Compressed air Port size Rc(PT) 1/8, 1/4, G1/8, 1/4 KHP320S-02 0 KHP320BV Effective sectional area Smm 2 (Cv) 19(1.0) Operating pressure 0~9kgf/cm 2 (0~0.9MPa) Excellent durability with its non-lubricated type. Minimized installing area with its small size. Valve can be installed vertically by selecting bracket attached type. Lubrication Ambient & uid temperature Weight Not required 0 ~ 60 KHP g 185g 235g KHP g 210g 260g 60

62 KHV320/530 series Hand Valve PNEUMATIC SOLENOID VALVE KHV 320 S V KHV320H-02 Port type Nil : Rc(PT) (Standard) G : G Body nominal size 320 : Body size 1/4 530 : Body size 3/8 Function S D Function Single acting Double acting Port size 01 : 1/8 (Only for KHV320) 02 : 1/4 (Only for KHV320) Nil : 3/8 (Only for KHV530) Lever position Nil : Horizontal V : Vertical SPRING RETURN TYPE DETENT TYPE Function Function H Closed center HD Closed center Pneumatic Solenoid Valve KHV320H-02-V I Pressure center ID Pressure center J Exhaust center JD Exhaust center KHV530H Type S D H/ I/ J Air, Inert gas Port size Rc(PT) 1/8, 1/4, 3/8, G1/8, 1/4, 3/8 Effective sectional area Smm 2 (Cv) Operating pressure Lubrication Ambient & uid temperature Applicable cylinder Weight KHV320 : 19(1.0) KHV530 : 45(2.5) 0~9kgf/cm 2 (0~0.9MPa) Not required 5 ~ 60 KHV320 : Ø32~Ø100 KHV530 : Ø32~Ø125 KHV320 : 290g KHV530 : 470g KHV320 : 14(0.8) KHV530 : 38(2.1) KHV530H-V Excellent durability with its non-lubricated type. Minimized installing area with its small size. (KHV320) Large capacity valve can be used for large actuator. (KHV530) Easy to install if horizontal type(kav) or vertical type(kbv) is selected depending on installation direction. KCC Co., Ltd. 61

63 KHV series Hand Valve PNEUMATIC SOLENOID VALVE KHV KHV Port type Nil : Rc(PT) (Standard) G : G Body nominal size 2 : 1/4 3 : 3/8 4 : 1/2 Piping & mounting method Piping Mounting 0 Side Body 1 Side Pannel Positions Position 0 3 Position 2 2 Position Port size Body size SFVM series Foot Valve Type KHV200 KHV300 KHV400 Compressed air Max. operating pressure 9.9kgf/cm 2 (0.99MPa) Proof pressure 15kgf/cm 2 (1.5MPa) Effective sectional area mm 2 (Cv) 7.5 (0.4) 20 (1.1) 55 (3.1) Ambient & uid temperature 5 ~ 60 Operating angle 90 SFVM SFVM Port type Nil : Rc(PT) (Standard) G : G Port size 02 : 1/4 03 : 3/8 Number of port Port SFVM220-02(1/4) 3 Port SFVM230-02(1/4) 5 Port SFVM250-02(1/4) SFVM250-03(3/8) SFVM Type SFVM Air SFVM Port size Rc(PT) 1/4 Rc(PT) 3/8 Effective sectional area (Cv) 19mm 2 (1.0) 45mm 2 (2.4) Operating pressure 10kgf/cm 2 (1MPa) Ambient & uid temperature 0 ~60 Lubrication Not required Weight 532g 650g 62

64 KQE2000 series Quick Exhaust Valve PNEUMATIC SOLENOID VALVE KQE E KQE KQE KQE E KQE E (With built-in silencer at the exhaust port) Excellent durability with its non-lubricated type. Excellent air exhaust-charesteristic with optimal ow design. Easy to mount and to maintain with light weight and small size Port type Nil : Rc(PT) (Standard) G : G Port size 01 : 1/8 02 : 1/4 Effective sectional area Smm 2 (Cv) Silencer Nil : Without silencer E : With silencer Type KQE KQE E Air, Inert gas Port size Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 1/8 Rc(PT) 1/4 Operating pressure IN-OUT 23(1.2) 29(1.6) 20(1.1) 27(1.5) OUT-EX 29(1.6) 33(1.8) 27(1.5) 31(1.7) 0.5~10kgf/cm 2 (0.05~1MPa) Weight 100g 120g Lubrication Ambient & uid temperature Not required 5~60 Pneumatic Solenoid Valve SQE series Quick Exhaust Valve SQE Port type Nil : Rc(PT) (Standard) G : G Body nominal size 2 : Body size 1/4 3 : Body size 1/8 4 : Body size 1/2 Port size 02 : 1/4 03 : 3/8 04 : 1/2 SQE 3000 Applications Proof pressure Max. operating pressure Ambient temperature Weight (Standard type) Air 15kgf/cm 2 (1.5MPa) 9.9kgf/cm 2 (0.99MPa) 5~60 235g KCC Co., Ltd. 63

65 KVHS series Residual Pressure Exhaust Valve PNEUMATIC SOLENOID VALVE KVHS KVHS20-02 KVHS30-03 Port type Nil : Rc(PT) (Standard) G : G Body nominal size 20 : 1/8, Body size 1/4 30 : 1/4, Body size 3/8 40 : 3/8, Body size 1/2 50 : 3/4, Body size1 Port size Port size Body nominal size /8 02 1/4 03 3/8 04 1/2 06 3/ Locking hole Nil : 1 (Exhaust) 2 : 2 (Exhaust/Supply) KVHS40-04 Port size Effective sectional area Smm 2 (Cv) Type KVHS20 KVHS30 KVHS40 KVHS50 IN, OUT Rc(PT)1/8 G1/8 Rc(PT)1/4 G1/4 Rc(PT)1/4 G1/4 Compressed air Rc(PT)3/8 G3/8 Rc(PT)3/8 G3/8 Rc(PT)1/2 G1/2 Rc(PT)3/4 G3/4 Rc(PT)1 G1 EXH Rc(PT)1/8, G1/8 Rc(PT)1/4, G1/4 Rc(PT)3/8, G3/8 Rc(PT)1/2, G1/2 IN OUT OUT EXH 10 (0.54) 14 (0.76) 16 (0.87) 31 (1.68) 50.5 (2.7) 80.5 (4.36) 133 (7.2) 185 (10) 11 (0.6) 16 (0.87) 14 (0.76) 29 (1.57) 32 (1.73) 41 (2.2) 49 (2.7) 60 (3.3) Operating pressure 0~9.0kgf/cm 2 (0~0.9MPa) Proof pressure 15kgf/cm 2 Ambient & uid temperature 0~60 Handle switching angle 90 Weight 190g 250g 350g 770g KVHS50-10 Combination with a modular style FRL (KCC or SMC) is possible. Easy operating manual switching valve When in the exhaust operation, the valve may be padlock secured preventing accidental start-ups. 64

66 STC series PNEUMATIC SOLENOID VALVE AC Solenoid(Push-Pull) STC V Specifications Refer to the following table. Voltage 110V : AC110 V 220V : AC220V STC-1092 Model STC-1092 STC-2402 STC-2502 STC-2602 STC-3002 Stroke 10 mm 15 mm 15 mm 15 mm 20 mm Force kgf(n) 0.6(5.8) 1.0(9.8) 1.5(14.7) 2.0(19.6) 3.0(29.4) Voltage Coil insulation Insulation resistance Withstand voltage Temperature rise AC1500V for 1 minute AC 110V, 220V 50/60Hz Class B 100M Ohm at 500V (Room temperature and humidity) AC2000V for 1 minute 85 (Resistance method) Weight 235g 360g 430g 490g 760g Pneumatic Solenoid Valve STC-2402 Model STC-3502 STC-3602 STC-362 STC-3702 STC-4402 Stroke 20 mm 20 mm 20 mm 20 mm 30 mm Force kgf(n) 3.0(29.4) 4.0(39.2) 4.0(39.2) 5.0(49.0) 5.0(49.0) Voltage Coil insulation Insulation resistance Withstand voltage Temperature rise AC 110V, 220V 50/60Hz Class B 100M Ohm at 500V (Room temperature and humidity) AC2000V for 1 minute 85 (Resistance method) Weight 1015g 1175g g 2130g STC-3002 Excellent heat, water, oil and impact resistance. Integration of coil bobbin and plunger guide improves electrical and mechanical properties. Model STC-442 STC-4502 STC-452 STC-4602 STC-472 Stroke 30 mm 30 mm 30 mm 30 mm 30 mm Force kgf(n) 5.0(49.0) 6.0(58.8) 7.0(68.6) 8.0(78.4) 10.0(98.0) Voltage Coil insulation Insulation resistance Withstand voltage Temperature rise AC 110V, 220V 50/60Hz Class B 100M Ohm at 500V (Room temperature and humidity) AC2000V for 1 minute 85 (Resistance method) Weight g g - KCC Co., Ltd. 65

67 STD series PNEUMATIC SOLENOID VALVE DC Solenoid STD - 06 A S 12V STD-06A Bore size of rod 06 : Ø6 08 : Ø8 10 : Ø10 12 : Ø12 16 : Ø16 Rod type A : Standard E : E-type Spring Nil : Without spring S : With spring Voltage 12V : DC12V 24V : DC24V Model STD-06A STD-06AS STD-08A STD-08AS Stroke 5mm 5mm 6mm 6mm Voltage DC12V,24V STD-12A Coil insulation Class A or quivalent Insulation resistance 100M Ohm at 500V (Room temperature and humidity) Withstand voltage AC1800V for 1 second Temperature rise 65 at 2.1W (Continue) 65 at 4.0W (Continue) Weight 40g 42g 90g 93g Model STD-10A STD-12E STD-12ES STD-16A Stroke 8mm 10mm 10mm 15mm Voltage DC12V,24V STD-18 series Silence Solenoid Coil insulation Insulation resistance Withstand voltage Temperature rise 65 at 4.2W (Continue) Class A or equivalent 100M Ohm at 500V (Room temperature and humidity) AC1800V for 1 second 65 at 6.0W (Continue) 65 at 10W(Continue) Weight 122g 210g 215g 430g STD - 18A 24V Voltage 12V : DC12V 24V : DC24V 220V : AC220V Max. stroke Suction force 25mm 2.0~3.0kgf Energizing ration 1/1, 1/2, 1/4, 1/6, 1/8, 1/10 Rated energizing Voltage Temperature rise Coil insulation Weight (1/1) When continuously energized AC 220V 50/60Hz DC 24V, 12V 65 at rated voltage Class E 682g 66

68 HDA/KAB series 2Port Small Solenoid Valve (Direct acting) HDA 021 Classi cation Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Weight (Kg) Model Feature HDA021 1/8 1 0~30 (0~3) 0.21 HDA031 1/ ~7 (0~0.7) 0.22 HDA032 1/ ~7 (0~0.7) 0.22 HDA031G 1/8 2.5 Air 0~7 (0~0.7) 0.22 HDA032G 1/4 2.5 Water 0~7 (0~0.7) Normal close, Direct acting 0.22 KAB / KAB /4 2 Clean oil Refer to the 0.32 KAB /4 3 Inert gas table below 0.32 KAB / HDA0201NO 1/8 2 0~7 (0~0.7) Normal open, Direct acting 0.25 HDA0201NO 1/4 2 0~7 (0~0.7) Normal open, Direct acting 0.25 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HDA 032 Pressure range kgf/cm 2 (MPa) Model Air Water Clean oil AC DC AC DC AC DC KAB ~30 (0~3) 0~25 (0~2.5) 0~30 (0~3) 0~25 (0~2.5) 0~30 (0~3) 0~25 (0~2.5) KAB ~15 (0~1.5) 0~15 (0~1.5) 0~15 (0~1.5) 0~15 (0~1.5) 0~7 (0~0.7) 0~7 (0~0.7) KAB ~10 (0~1) 0~10 (0~1) 0~10 (0~1) 0~10 (0~1) 0~7 (0~0.7) 0~7 (0~0.7) KAB ~7 (0~0.7) 0~7 (0~0.7) 0~7 (0~0.7) 0~7 (0~0.7) 0~5 (0~0.5) 0~5 (0~0.5) Process Valve KAB AC110V Model Refer to the table below Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 SL SILICONE Clean water -5~60 E EPDM Hot water 100 KAB M - AC220V Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC6V : DC6V DC24V : DC24V DC12V : DC12V Order made of G thread type available. Standard : HDA021 - G Thread : HDAG021 HDA 0201NO (N.C.) temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Brass Electrical entry Lead wire Not available in explosive atmosphere. (N.O.) KCC Co., Ltd. 67

69 HDW series 2Port Solenoid Valve (Water, Air type/n.c.) Classi cation Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Weight (Kg) Model Feature HDW021 1/ ~20 (0~2) 0.5 HDW022 1/4 1.5 Water 0~20 (0~2) 0.5 HDW042 1/4 5 Air 0~10 (0~1) Normal close, Direct acting 0.5 HDW043 3/8 5 Clean oil 0~10 (0~1) 0.5 HDW012H 1/4 1 0~100 (0~10) 0.5 HDW154 1/2 15 Inert gas N.C., Diaphragm type, 0.3~10 (0.03~1) DC only valve 0.8 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HDW 021 HDW AC220V HDW 042 HDW 012H Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HDW021 - G Thread : HDWG021 Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 SL SILICONE Clean water -5~60 E EPDM Hot water 100 T PTFE Chemical, Hot water 180 *Only HDW012H is applicable. Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. HDW

70 HPW102~6524 series 2Port Solenoid Valve (Water, Air type/n.c.) HPW 102 HPW 103 Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPW102 1/ HPW103 3/8 10 0~10 (0~1) 0.53 HPW154 1/2 15 Low 0.75 HPW206 3/4 20 vacuum(option) Diaphragm type 1.3 HPW Water N.C. 1.3 HPW /4 32 Air 2.2 HPW /2 40 Clean oil 0.3~10 (0.03~1) 2.47 HPW Inert gas 3.57 HPW / ~10 (0.05~1) Piston pilot type N.C., Bronze Body 8.3 HPW102DC 1/ HPW103DC 3/8 10 N.C ~10(0.03~1) Pilot Diaphragm type HPW206DC 3/4 20 DC only valve 1.3 HPW2510DC If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW 154 HPW AC220V Process Valve HPW 102DC Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HPW102 - G Thread : HPWG102 Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Brass Bronze : HPW6524 HPW 6524 KCC Co., Ltd. 69

71 HPW3212F(O)~6524F(O) series 2Port Solenoid Valve (Water, Air type) HPW 5020F Classi cation Model Thread JIS 10K FF Ori ce Ø Pressure range kgf/cm 2 (MPa) HPW3212F - - AC220V PROCESS VALVE Feature Weight (Kg) HPW2510F HPW3212F 1 1/ ~10 (0.03~1) Diaphragm type, N.C. HPW4014F 1 1/ HPW5020F 2 50 Water 8.0 HPW6524F 2 1/2 65 Air Clean oil 0.5~10 (0.05~1) Piston pilot type, N.C HPW3212FO 1 1/4 32 Inert gas 6.2 HPW4014FO 1 1/ ~10 (0.03~1) Diaphragm type, N.O HPW5020FO HPW6524FO 2 1/ ~10 (0.05~1) Piston pilot type, N.O If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW 6524F Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature Ambient temperature 0~60 Coil insulation Class B Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Body material Brass, Bronze Bronze : HPW

72 HPW-NO, DNO series 2Port Solenoid Valve (Water, Air type/n.o.) HPW 102NO Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPW102NO 1/ HPW103NO 3/ ~7 (0~0.7) Direct acting, N.O. 0.6 HPW154NO 1/ HPW206NO 3/ HPW2510NO 1 25 Water 1.3 HPW3212NO 1 1/4 32 Air 0.3~10 (0.03~1) Diaphragm type, N.O. 2.2 HPW4014NO 1 1/2 40 Clean oil 2.5 HPW5020NO 2 50 Inert gas 3.7 HPW6524NO 2 1/ ~10 (0.05~1) Piston pilot type N.O., Bronze Body 8.3 HPW102DNO 1/ HPW103DNO 3/ ~10 (0.03~1) Diaphragm type, N.O. 0.6 HPW154DNO 1/ If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW2510NO - - AC110V Process Valve HPW 3212NO Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HPW102NO - G Thread : HPWG102NO Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz HPW 102DNO temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Brass, Bronze Bronze : HPW6524 HPW102,103,154NO KCC Co., Ltd. 71

73 HVD022NO~052NO series 2Port Solenoid Valve (Steam, Water/N.O.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HVD022NO 1/4 2 0~15 (0~1.5) 0.42 HVD032NO 1/4 3 Steam Water 0~12 (0~1.2) Direct acting, N.O HVD042NO 1/4 4 Clean oil 0~9 (0~0.9) Mounted rectifier Inert gas 0.42 HVD052NO 1/4 5 0~6.5(0~0.65) 0.42 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HVD 022NO HDV052NO - AC220V Model Refer to the table above Seal material Material Use Nil FPM Chemical, Hot water 120 E EPDM Hot water 100 N NBR Water, Air, Oil Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz AC24V : AC24V 50Hz/60Hz DC12V : DC12V DC24V : DC24V Order made of G thread type available. Standard : HVD022NO - G Thread : HVDG022NO temperature Ambient temperature 0~120 Allowable voltage ±5% (DC) 40 (Max.) Seal material FPM Coil insulation Class B Body material Brass Electrical entry Grommet Not available in explosive atmosphere. 72

74 HDS021, 022, 042, 043 series 2Port Solenoid Valve (Steam, Hot water/n.c.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) 0~10 (0~1) PROCESS VALVE Feature Weight (Kg) HDS021 1/ Steam HDS022 1/4 1.5 Hot water 0~10 (0~1) 0.5 Direct acting, N.C. HDS042 1/4 5 Clean oil 0~7 (0~0.7) 0.5 Inert gas HDS043 3/8 5 0~7 (0~0.7) 0.5 In case of oil is applied, the range of pressure to be applied shall be based on the 50cst of oil viscosity. HDS AC220V HDS 021 HDS 042 Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Seal material Material Use Nil FPM Chemical, Hot water 120 T PTFE Chemical, Hot water 180 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Process Valve Order made of G thread type available. Standard : HDS021 - G Thread : HDSG021 temperature Ambient temperature 0~140 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material FPM Coil insulation Class H Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. KCC Co., Ltd. 73

75 HPS102~6524 series 2Port Solenoid Valve (Steam, Hot water/n.c.) HPS 103 Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPS102 1/ HPS103 3/ HPS154 1/ HPS206 3/4 20 Piston pilot type 1.55 HPS N.C HPS /4 32 Air 2.55 HPS /2 40 Steam 0.5~7 (0.05~0.7) Hot water 2.75 HPS HPS /2 65 Piston pilot type N.C., Bronze Body 8.3 HPS102DC 1/ HPS103DC 3/8 10 Piston pilot type, N.C. DC24V only valve 0.7 HPS154DC 1/ If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPS206 - AC220V HPS 206 Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Order made of G thread type available. Standard : HPS102 - G Thread : HPSG102 Nil G T D Z HPS 6524 temperature Ambient temperature 0~180 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE + SUS 304 PISTON Coil insulation Class H Body material Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Brass Bronze : HPW6524 HPS 103DC 74

76 HPS2510F(O)~6524F(O) series 2Port Solenoid Valve (Steam, Hot water) HPS 5020F Classi cation Model Thread JIS 10K FF Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPS2510F HPS3212F 1 1/ HPS4014F 1 1/ HPS5020F 2 50 Air 8.5 HPS6524F 2 1/2 65 Steam 0.5~7 (0.05~0.7) Piston pilot type, N.C HPS3212FO 1 1/4 32 Hot water 6.6 HPS4014FO 1 1/ HPS5020FO HPS6524FO 2 1/ If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPS5020FO - AC220V HPS 6524FO Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Process Valve Nil G T D Z temperature Ambient temperature 0~180 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE + SUS 304 PISTON Coil insulation Class H BodyMaterial Brass, Bronze Electrical entry Lead wire G(PF) 1/2 Bronze : HPW6524 Not available in explosive atmosphere. KCC Co., Ltd. 75

77 HSV102NO, 103NO, 154NO series 2Port Solenoid Valve (Steam, Hot water/n.o.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HSV102NO 1/4 5 Steam HSV103NO 3/8 4.5 Hot water Clean oil 0~5(0~0.5) Direct acting, N.O HSV154NO 1/2 4.5 Inert gas If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HSV102NO - AC220V HSV 102NO Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Order made of G thread type available. Standard : HSV102NO - G Thread : HSVG102NO Nil G T D Z temperature Ambient temperature 0~140 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material FPM Coil insulation Class B Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. 76

78 HPS102NO~6524NO series 2Port Solenoid Valve (Steam, Hot water/n.o.) HPS 102NO Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPS102NO 1/ HPS103NO 3/ HPS154NO 1/ HPS206NO 3/4 20 Air 1.55 HPS2510NO 1 25 Steam 0.5~7 (0.05~0.7) Piston pilot type, N.O HPS3212NO 1 1/4 32 Hot water 2.55 HPS4014NO 1 1/ HPS5020NO HPS6524NO 2 1/ In case of oil is applied, the range of pressure to be applied shall be based on the 50cst of oil viscosity. HPS2510NO - AC220V HPS 154NO Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Order made of G thread type available. Standard : HPS102NO - G Thread : HPSG102NO Process Valve Nil G T D Z HPS 3212NO temperature Ambient temperature 0~180 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE + SUS 304 PISTON Coil insulation Class H Body material Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Brass Bronze : HPS6524 HPS 6524NO KCC Co., Ltd. 77

79 HPW102-20~ series 2Port High Pressure Solenoid Valve (Water, Air type/n.c.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPW / HPW / HPW / Water HPW /4 20 Air Piston pilot type ~20(0.05~2) HPW Clean oil N.C Inert gas HPW / HPW / HPW If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW 102 HPW AC220V Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HPW G Thread : HPWG Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR + SUS 304 PISTON Coil insulation Class B Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. 78

80 HPW3212F-20~5020F-20 series 2Port High Pressure Solenoid Valve (Water, Air type/n.c.) Classi cation Model Thread JIS 10K FF Ori ce Ø Pressure range kgf/cm 2 (MPa) HPW3212F DC24V PROCESS VALVE Feature Weight (Kg) HPW3212F /4 32 Air, Water 6.6 HPW4014F /2 40 Clean oil 0.5~20 (0.05~2) Piston pilot type, N.C HPW5020F Inert gas 8.5 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW 5020F-20 Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Process Valve HPW 6524F-20 temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR + SUS 304 PISTON Coil insulation Class B BodyMaterial Brass, Bronze Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. KCC Co., Ltd. 79

81 HPM206-20~ series 2Port High Pressure Solenoid Valve (Water, Air type/n.c.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPM / HPM Air, Water Manual lever HPM /4 32 Clean oil 0.5~20(0.05~2) 2.55 N.C. Inert gas HPM / HPM If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPM AC110V HPM Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HPM206 - G Thread : HPMG206 Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR + SUS 304 PISTON Coil insulation Class B Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. 80

82 HKW154~5020 series 2Port Solenoid Valve (Water, Air type/piston Pilot Kick Type-Direct Acting) Classi cation Model Thread Rc(PT), G JIS 10K FF Ori ce Ø HKW154 1/2 15 Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature HKW206 3/4 20 HKW Water Piston pilot kick type - Direct acting Air AC 0~10 (0~1) Zero differential pressure operating HKW /4 32 Clean oil DC 0~7(0~0.7) (Vacuum) Inert gas Horizontal piping (below 30 ) installation HKW /2 40 HKW If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HKW 154B HKW3212 B F O - - AC220V HKW 154S Model Refer to the table above Body material B : Brass S : Stainless steel (Body SUS 316, Trim SUS 304) Connection type Nil : Screw type F : Flange type JIS 10K FF (Available for type of orice overø25) Inital status Nil : N.C. (Standard) NO : N.O. (Screw type symbol) O : N.O. (Flange type symbol) Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC24V : DC24V Order made of G thread type available. Standard : HKW154 - G Thread : HKWG154 Process Valve HKW 3212F (N.C.) (N.O.) temperature Ambient temperature 0~60 Coil insulation Class B Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Body material Model Weight(Kg) Model Weight(Kg) HKW154B(NO) 1.73 HKW154S(NO) 1.66 HKW206B(NO) 2.34 HKW206S(NO) 2.1 HKW2510B(NO) 2.34 HKW2510S(NO) 2.24 HKW3212B(NO) 4.16 HKW3212S(NO) 4.2 HKW4014B(NO) 4.36 HKW4014S(NO) 4.3 HKW5020B(NO) 5.30 HKW5020S(NO) 5.6 HKW2510BF(O) 5.8 HKW2510SF(O) 5.8 HKW3212BF(O) 7.7 HKW3212SF(O) 7.4 HKW4014BF(O) 7.86 HKW4014SF(O) 7.46 HKW5020BF(O) 9.7 HKW5020SF(O) 9.34 HKW-B : Brass HKW-S : Stainless steel (Body : SUS 316, Trim : SUS304) KCC Co., Ltd. 81

83 HKS154~5020 series PROCESS VALVE 2Port Solenoid Valve (Steam, Hot water/piston Pilot Kick Type-Direct acting) Classi cation Model Thread Rc(PT), G JIS 10K FF Ori ce Ø Pressure range kgf/cm 2 (MPa) Feature HKS154 1/2 15 HKS206 3/4 20 HKS HKS /4 32 HKS /2 40 Air Steam Hot water 0~7(0~0.7) Piston pilot kick type - Direct acting Operation(vacuum) of differential pressure 0kgf/cm 2 Horizontal piping (below 30 ) installation HKS If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HKS 154S HKS206 B NO - - AC110V HKS 3212S Model Refer to the table above Body material B : Brass S : Stainless steel (Body: SUS 316, Trim: SUS 304) Connection type Nil : Screw type F : Flange type JIS 10K FF (Available for type of orice over Ø32) Initial status Nil : N.C. (Standard) NO : N.O. (Screw type symbol) O : N.O. (Flange type symbol) Seal material Material Use Nil PTFE Chemical, Hot water 150 (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC24V : DC24V Order made of G thread type available. Standard : HKS154 - G Thread : HKSG154 HKS 3212SF temperature Ambient temperature 0~150 Coil insulation Class H Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE + PISTON Body material HKW-B : Brass HKW-S : Stainless steel (Body : SUS 316, Trim : SUS304) Model Weight(Kg) Model Weight(Kg) (N.C.) HKS154B(NO) 1.72 HKS154S(NO) 1.66 HKS206B(NO) 2.34 HKS206S(NO) 2.1 HKS2510B(NO) 2.34 HKS2510S(NO) 2.24 HKS3212B(NO) 4.16 HKS3212S(NO) 4.2 HKS4014B(NO) 4.36 HKS4014S(NO) 4.3 (N.O.) HKS5020B(NO) 5.30 HKS5020S(NO) 5.6 HKS3212BF(O) 7.7 HKS3212SF(O) 7.4 HKS4014BF(O) 7.86 HKS4014SF(O) 7.46 HKS5020BF(O) 9.7 HKS5020SF(O)

84 HDA021S, 032S series 2, 3Port SUS Solenoid Valve (Water, Air type/n.c.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HDA021S 1/8 1.6 Air 0~10 (0~1) 2Port, Normal close, Direct acting 0.16 HDA032S 1/4 2.5 Water 0~7 (0~0.7) Stainless steel Body 0.22 HDA021S-3 1/8 1.6 Clean oil 0~10 (0~1) 3Port, Normal close, Direct acting 0.23 HDA032S-3 1/4 2.5 Inert gas 0~7 (0~0.7) Stainless steel Body 0.31 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HDA 021S HDA021S - - AC220V HDA 021S-3 (2 Port) (3 Port) HDC042 series 2Port SUS Solenoid Valve (Chemical Type) Model Refer to the table above Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 SL SILICONE Clean water -5~60 E EPDM Hot water 100 temperature Ambient temperature Classi cation 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Stainless steel Electrical entry Lead wire Not available in explosive atmosphere. Model Thread Rc(PT), G Ori ce Ø Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC24V : DC24V DC12V : DC12V Pressure range kgf/cm 2 (MPa) HDC042 1/4 4 Chemical 0~2.5(0~0.25) Order made of G thread type available. Standard : HDA021S - G Thread : HDAG021S Feature With structure that prevents fluid flow into operating part Weight (Kg) 0.5 Process Valve HDC 042 Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp HDC AC220V Nil G T D Z Seal material Material Use Chemical, Hot Nil PTFE water(standard) M FPM Chemical, Hot water 120 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz temperature 0~50 Allowable voltage ±10% (AC), ±5% (DC) Ambient temperature 50 (Max.) Seal material PTFE + DIAPHRAGM Coil insulation Class B Body material Stainless steel Electrical entry Lead wire G(PF) 1/2 Order made of G thread type available. Standard : HDC042 - G Thread : HDCG042 Not available in explosive atmosphere. KCC Co., Ltd. 83

85 HDW032S, 033S series 2, 3Port SUS Solenoid Valve (Water, Air type/n.c.) Classi cation PROCESS VALVE Model Thread Ori ce Rc(PT), G Ø Pressure range kgf/cm 2 (MPa) Feature Weight (Kg) HDW032S 1/4 Air 2 Port, Normal close, Direct AC 0~20(0~2) 0.5 acting HDW033S 3/8 Water DC 0~10 (0~1) Stainless steel Body HDW032S-3 1/4 Clean oil 3 Port, Normal close, Direct ~7 (0~0.7) acting HDW033S-3 3/8 Inert gas Stainless steel Body 0.51 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HDW 032S HDW033S - - AC220V HDW 032S-33 (2 Port) (3 Port) Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HDW032S - G Thread : HDWG032S temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Stainless steel Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. Seal material Material Note Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz 84

86 HVS042(NO),043(NO) series 2Port SUS Solenoid Valve (Water, Air type) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HVS042 1/4 5 AC 0~10(0~1) Direct acting, N.C. 0.6 Air HVS043 3/8 5 DC 0~7(0~0.7) Stainless steel Body Water 0.6 HVS042NO 1/4 5 Clean oil Inert gas Direct acting, N.O ~0.4(0~0.04) HVS043NO 3/8 5 Stainless steel Body 0.6 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HVS 043 HVS043NO - - AC220V HVS 042NO (N.C.) Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HVS042 - G Thread : HVSG042 Seal material Material Note Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 T PTFE Chemical, Hot water 180 For PTFE (T type) seal material, only N.O type is available. Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC110V-50Hz : AC110V 50Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Process Valve (N.O.) temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Stainless steel Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. KCC Co., Ltd. 85

87 HSR053S, 063S series 2Port Cryogenic Solenoid Valve (Oxygen, Nitrogen, Refrigerant) Classi cation Thread Rc(PT), G Ori ce Ø Model HSR053S 3/8 5 R-12, R-22, R502, Argon, Oxigen, HSR063S 3/8 6 Nitrogen, Refrigerant PROCESS VALVE Pressure range kgf/cm 2 (MPa) Feature Weight (Kg) 0~5(0~0.5) Cryogenic solenoid valve 0.55 HSR 053S Model Refer to the table above HSR053S Order made of G thread type available. Standard : HSR053S - G Thread : HSRG053S - AC220V Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz (N.C.) HSR102P, 103P, 104P series 2Port Low Temperature Solenoid Valve (Refrigerant, Air, Water, Gas) temperature Ambient temperature Classi cation Model Thread Rc(PT), G -190~50 Ori ce Ø Allowable voltage Pressure range kgf/cm 2 (MPa) ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE Coil insulation Class B Body material Stainless steel Electrical entry Connector type Feature Weight (Kg) HSR102P 1/4 Refrigerant AC 0~10(0~1) Piston pilot kick type - Direct acting HSR103P 3/ Air, Water 0.8 DC 0~7(0~0.7) N.C. Low temperature Valve Gas HSR104P 1/2 HSR103P - - AC220V HSR 102P (N.C.) Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Seal material Material Note Nil PTFE Chemical, Hot water(standard) N NBR Water, Air, Oil M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V Order made of G thread type available. Standard : HSR102P - G Thread : HSRG102P temperature Ambient temperature -20~120 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material PTFE Coil insulation Class B Body material Stainless steel Electrical entry Lead wire G(PF) 1/2 86

88 HPW103S~2510S series 2Port SUS Solenoid Valve (Water, Air type/n.c.) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) PROCESS VALVE Feature Weight (Kg) HPW103S 3/ Air HPW154S 1/2 10 Diaphragm type, N.C. Water AC 0~10(0~1) 0.82 Stainless steel Body HPW206S 3/4 20 Clean oil DC 0~7(0~0.7) 1.03 Inert gas HPW2510S If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HPW 103S HPW154S - - DC24V Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HPW103S - G Thread : HPWG103S Seal material Material Note Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz Process Valve temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material NBR Coil insulation Class B Body material Body : SUS316, Trim : SUS304 Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. KCC Co., Ltd. 87

89 HDW011-3 ~ series PROCESS VALVE 3Port Solenoid Valve (Water, Air type/direct acting) Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) Feature Weight (Kg) HDW011B-3 1/8 1.5 HDW012B-3 1/4 1.5 Air 0~10(0~1) HDW022B-3 1/4 2 Water HDW023B-3 3/8 2 Clean oil HDW022T-3 1/4 2.5 Inert gas HDW / ~7(0~0.7) 3Port, Direct acting ~10(0~1) FPM seal, 3Port, Direct acting Option 0~15(0~1.5) AC 0~10(0~1) DC 0~7(0~0.7) If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. 3Port, Direct acting 3 Way directional control 0.63 HDW011B-3 HDW022B DC24V HDW022B-3 Model Refer to the table above Electrical entry Nil : Console box type coil (Standard) G : Grommet type coil T : Terminal box type coil D : Din coil + Din connector Z : Din coil + Din connector lamp Nil G T D Z Order made of G thread type available. Standard : HDW011B-3 - G Thread : HDWG011B-3 Seal material Material Note Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz HDW 022T-3 temperature Ambient temperature 0~60 50 (Max.) Allowable voltage Seal material ±10% (AC), ±5% (DC) NBR FPM(HDW022T-3) Coil insulation Class B Body material Brass Electrical entry Lead wire G(PF) 1/2 Not available in explosive atmosphere. HDW052-3 (HDW011B-3 ~ HDW023B-3) (HDW022T-3, HDW052-3) 88

90 SPECIAL SOLENOID VALVE series PROCESS VALVE Special Solenoid Valve HPW 5020-C Classi cation Model Thread Rc(PT), G Ori ce Ø HPW5020-C 2 50 HVV12FL Ø48 Flange Air, Water Clean Air Inert gas Pressure range kgf/cm 2 (MPa) 0.3~10(0.03~1) 12 Air -1~1(-0.1~0.1) HDW154B 1/2 15 Air, Water 0.3~10(0.03~1) SV1430 1/4 14 Air, Water Clean Air Inert gas 0~7(0~0.7) If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. Feature Diaphragm type, Flow rate adjustment by manual lever OPEN - CLOSE (Manually) Direct acting, N.C. Stainless steel Body Vacuum type, allow vertical piping and horizontal piping. Diaphragm type, Spring cooler for damage prevention. 2 Port manual control solenoid valve Steam iron Weight (Kg) Classi cation HPW5020-C HVV12FL Standard Option Standard Option temperature 0~60 EPDM, FPM 0~50 EPDM HVV12FL Ambient temperature 50 (Max.) 50 (Max.) Coil insulation Class B Class B Electrical entry Lead wire G(PF) 1/2 Rated voltage AC100V 50/60Hz AC110V 60Hz AC200V 50/60Hz AC220V 60Hz DC24V, DC12V Grommet, Terminal box, Din connector AC220V 50Hz AC240V 50Hz AC24V 50Hz AC110V 60Hz AC220V 60Hz DC24V Lead wire G(PF) 1/2 AC240V 50Hz DC12V Voltage allow ±10% (AC), ±5% (DC) ±5% (AC), ±5% (DC) Process Valve BodyMaterial Brass SUS 316 Seal material NBR EPDM, FPM NBR EPDM Not available in explosive atmosphere. Classi cation HDW154B SV1430 Standard Option Standard Option temperature 0~60 0~150 Ambient temperature 50 (Max.) 50 (Max.) Coil insulation Class B Class H HDW 154B Electrical entry Lead wire G(PF) 1/2 Lead wire G(PF) 1/2 Rated voltage DC12V, DC24V AC100V 50/60Hz AC110V 60Hz AC200V 50/60Hz AC220V 60Hz AC220V 50Hz AC240V 50Hz AC24V 50Hz Voltage allow ±5% (DC) ±5% (AC), ±5% (DC) BodyMaterial Brass SUS 316 Seal material NBR + DIAPHRAGM FPM Not available in explosive atmosphere. SV 1430 KCC Co., Ltd. 89

91 HCV series PROCESS VALVE 2,3Port Special Solenoid Valve (Chemical Type/Direct acting) HCV 201 HCV Classi cation Model Thread Rc(PT), G Ori ce Ø HCV201 2 HCV301 1/8 3 HCV401 4 HCV202 2 HCV302 1/4 3 HCV402 4 HCV201-NO 2 HCV301-NO 1/8 3 Chemical HCV401-NO 4 Neutral gas HCV202-NO 2 Hot air HCV302-NO 1/4 3 Hot oil HCV402-NO 4 HCV HCV /8 3 HCV HCV HCV /4 3 HCV Pressure range kgf/cm 2 (MPa) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) IN->OUT 12(1.2) OUT->IN 8(0.8) IN->OUT 7(0.7) OUT->IN 5(0.5) IN->OUT 5(0.5) OUT->IN 3(0.3) If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. Feature 2port, FPM seal, Direct acting N.C., Manual button 2port, FPM seal, Direct acting N.O., Manual button 3port, FPM seal, Direct acting Manual button Weight (Kg) 0.6 (N.C.) HCV402 - AC220V (N.O.) (3Port) Model Refer to the table above Order made of G thread type available. Standard : HCV021 - G Thread : HCVG021 Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V temperature Ambient temperature -10~80 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material FPM Coil insulation Class B, H Body material SUS 316 Electrical entry Din connector Not available in explosive atmosphere. 90

92 HTV series 2,3Port Te on Solenoid Valve (Chemical Type/Direct Acting) HTV 0201-C Classi cation Model Thread Rc(PT), G Ori ce Ø Pressure range kgf/cm 2 (MPa) HTV0201-C 2 3(0.3) 1/8 HTV0301-C 3 2.5(0.25) HTV0402-C 4 1.5(0.15) 1/4 HTV0502-C 5 1.0(0.1) HTV0201-O 2 Chemical 3(0.3) 1/8 HTV0301-O 3 O3 2.5(0.25) HTV0402-O 4 Purity 1.5(0.15) HTV0502-O 1/4 5 Clean water 1.0(0.1) PROCESS VALVE Feature Direct acting, N.C. Teflon body, seat Direct acting, N.O. Teflon body, seat Weight (Kg) HTV04L2-C HTV05L3-C 5 Direct acting, N.C /8 0~3(0~0.3) HTV09L3-C 9 Teflon body, seat 1.8 HTV09L4-C 1/ HTV /8 3 NC COM 1.5kgf/cm 2 NC NO NO COM 0.5kgf/cm 2 Direct acting, 3Port Teflon body, seat HTV 04L2-C HTV 09L4-C HTV0402-C - AC220V Process Valve Model Refer to the table above Order made of G thread type available. Standard : HTV0201-C - G Thread : HCTVG0201-C Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V HTV (N.C.) temperature Ambient temperature 0~60 50 (Max.) 40 (Max.) : HTV Allowable voltage Seal material ±10% (AC), ±5% (DC) NBR + Teflon COATING Coil insulation Class B Body material Teflon Electrical entry Lead wire Not available in explosive atmosphere. (N.O.) (3Port) 2 IN(COM) 1 (N.C) 3 (N.O) KCC Co., Ltd. 91

93 HCTV series 2, 3Port Te on Cylinder Valve (Chemical Type) HCTV 0201-C HCTV Classi cation Model Thread Rc(PT), G Ori ce Ø HCTV0201-C 2 1/8 HCTV0301-C 3 HCTV0402-C 4 1/4 HCTV0502-C 5 HCTV0903-C 3/8 9 Pressure range kgf/cm 2 (MPa) PROCESS VALVE Cylinder pressure range kgf/cm 2 (MPa) Feature Weight (Kg) HCTV0904-C 1/2 9 Pneumatic valve 0~5(0~0.5) 4~6(0.4~0.6) 0.77 HCTV0201-O 2 Chemical Teflon body, seat 1/8 HCTV0301-O 3 O3 HCTV0402-O 4 Purity /4 Clean HCTV0502-O 5 water HCTV0903-O 3/ HCTV0904-O 1/2 9 HCTV /8 HCTV Pneumatic valve, 3port 0~6(0~0.6) 5~7(0.5~0.7) HCTV Teflon body, seat 1/4 HCTV HCTV0402-C (N.C.) Model Refer to the table above Order made of G thread type available. Standard : HCTV0201-C - G Thread : HCTVG0201-C (N.O.) (3Port) 2 IN(COM) temperature 0~60 Seal material NBR + PTFE COATING Ambient temperature 40 (Max.) Body material Teflon Body connection Rc(PT) 1/8, 1/4 Not available in explosive atmosphere. 1 (N.C) 3 (N.O) 92

94 HPV series Chemical Pinch Solenoid Valve Classi cation PROCESS VALVE Model Tube Size Pressure range kgf/cm 2 (MPa) Feature Weight (Kg) HPV406 N.C. HPV406NO 1x3, 2x4, 3x5, 4x6 Chemical N.O. 0.3 HPV406D Liquid Double acting 0~1(0~0.1) HPV810 Air N.C. HPV810NO 5x8, 6x9, 7x10, 8x11 Water N.O. 0.8 HPV810D Double acting The fluid inside the silicon tube is controlled by an external pinch and a solenoid. HPV 406 Series HPV810D - AC220V Model Refer to the table above Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC24V : DC24V DC90V : DC90V DC180 : DC180V Process Valve HPV 810 Series (N.C.) (N.O.) temperature Ambient temperature 0~100 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Body material PVC Coil insulation Class B Electrical entry Lead wire Not available in explosive atmosphere. (Double acting) U 2 IN(COM) 1 (N.C) 3 (N.O) KCC Co., Ltd. 93

95 KLCV series 2, 3Port Coolant Valve (Oil, Cutting Oil/Direct acting) Classi cation Model Thread Rc(PT), G KLCV093 3/8 Ori ce Ø Pressure range kgf/cm 2 (MPa) KLCV094 1/2 Water, Air 0~16(0~1.6) KLCV093NO 3/8 9 Oil Option 0~30(0~3) KLCV094NO 1/2 Cutting oil PROCESS VALVE Feature Normal close, Direct acting Normal open, Direct acting Weight (Kg) 0~8(0~0.8) KLCV /2 3port, Direct acting 2.99 Option 0~80(0~8) If oil is applied, the range of pressure shall be based on 50cst for oil viscosity KLCV 093 Model Refer to the table above KLCV094 Order made of G thread type available. Standard : KLCV093 - G Thread : KLCVG093 - AC220V Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V AC220V-50Hz : AC220V 50Hz AC230V-50Hz : AC230V 50Hz AC240V-50Hz : AC240V 50Hz AC24V-50Hz : AC24V 50Hz KLCV (KLCV093,094) NC temperature Ambient temperature 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Seal material SUS Coil insulation Class F Body material SUS 316 Electrical entry Din connector type Not available in explosive atmosphere. (KLCV154-3) NC 94

96 HAV series Cylinder Valve (Water, Air Type/Pneumatic Valve) HAV 8A Classi cation Thread Model Rc(PT), G, JIS 10K FF Valve Cyinder HAV8A 1/4 M5 Ori ce Ø 10 PROCESS VALVE Pressure range kgf/cm 2 (MPa) Valve Cylinder Feature HAV10A 3/ HAV15A 1/ Weight (Kg) HAV20A 3/4 1/ HAV25A 1 25 Pneumatic valve 1.45 HAV32A 1 1/4 32 Air 2.5 HAV40A 1 1/2 40 Water 0~15(0~1.5) 5~7(0.5~0.7) 2.9 HAV50A 2 50 Clean oil 3.8 HAV65A 2 1/ /4 HAV32AF 1 1/ HAV40AF 1 1/2 40 Pneumatic 6.7 valve HAV50AF 2 50 Flange type 8.6 HAV65AF 2 1/ If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. 0.4 HAV50AF - Process Valve HAV 32AF Model Refer to the table above Order made of G thread type available. Standard : HAV8A - G Thread : HAVG8A Seal material Material Use Nil NBR (Standard) M FPM Chemical, Hot water 120 E EPDM Hot water 100 U URETHANE NC temperature 0~60 Seal material NBR Ambient temperature 50 (Max.) Not available in explosive atmosphere. Body material Screw type : Brass Flange type : Bronze KCC Co., Ltd. 95

97 HMV-BU/BUS/BUV series Electric Motor Valve Actuated Butter y Valve HMV 40BU Classi cation Model Body connection Ø Wafered type Pressure range kgf/cm 2 (MPa) PROCESS VALVE Operating time Feature Weight (Kg) HMV 40BU HMV 50BU HMV 65BU 65 Air, Water 2.5sec Butterfly valve ~10(0~1) HMV 80BU 80 Clean oil 10sec Single-phase three wire system 8.85 HMV 100BU HMV 125BU sec HMV 40BUS HMV 50BUS 50 Air 10.1 HMV 65BUS 65 Hot water Steam 5(0.5) 2.5sec SUS type butterfly valve HMV 80BUS 80 Clean oil Water 10(1) 10sec Single-phase three wire system HMV 100BUS 100 Steam Air 10(1) HMV 125BUS sec 18.6 HMV 40BUV HMV 50BUV 50 Air 10.1 HMV 65BUV 65 Hot water Steam 5(0.5) 2.5sec Steam type butterfly valve HMV 80BUV 80 Clean oil Water 10(1) 10sec Single-phase three wire system HMV 100BUV 100 Steam Air 10(1) HMV 125BUV sec 18.6 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HMV40BUV AC220V HMV 40BUS Model Refer to the table above Operating time 2 : 2.5sec 10 : 10sec Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V Circuit Diagram temperature Ambient temperature HMV-BU : 0~60 HMV-BUS(V) : 0~ (Max.) Allowable voltage Seal material Electrical entry Lead wire Body material Not available in explosive atmosphere. ±10% (AC), ±5% (DC) HMV-BU : NBR HMV-BUS(V) : Teflon HMV-BU : FC(DISK:SUS304) HMV-BUS : SUS304 HMV-BUV : FC(DISK:SUS304) 96

98 HMV-SC/BSC series Electric Motor Valve Actuated Ball Valve(Screw Type) HMV 15SC HMV 15SC-3T HMV 02SC-15 Classi cation Model Thread Rc(PT) Pressure range kgf/cm 2 (MPa) PROCESS VALVE Operating time Feature Weight (Kg) HMV 15SC 1/ HMV 20SC 3/4 3Piece 5.35 HMV 25SC 1 Single-phase three wire system 5.70 HMV 32SC 1 1/4 Body : SUS 304 (Option SUS 316) 6.15 HMV 40SC 1 1/2 Steam 3(0.3) Seal : PTFE 7.25 HMV 50SC 2 Water 10(1) 2.5sec 8.45 HMV 15SC-3T(L) 1/2 Air 10(1) 10sec 5.05 HMV 20SC-3T(L) 3/4 3WAY, 3PIECE 5.45 HMV 25SC-3T(L) 1 Single-phase three wire system 5.95 HMV 32SC-3T(L) 1 1/4 Body : SUS 304 (Option SUS 316) 6.6 HMV 40SC-3T(L) 1 1/2 Air Seal : PTFE 7.85 HMV 50SC-3T(L) 2 Water 9.55 HMV 02SC 1/4 Clean oil 1.5 HMV 03SC 3/8 Steam 1, 2PIECE 1.5 HMV 04SC 1/2 2.5sec Single-phase three wire system 1.5 HMV 06SC 3/4 Body : SUS HMV 10SC 1 Seal : Teflon 1.7 HMV 02SC-15 1/4 Water 10(1) 1.5 HMV 03SC-15 3/8 Air 10(1) 1.5 HMV 04SC-15 1/2 1.5 HMV 06SC-15 3/4 15sec 1, 2PIECE 1.6 HMV 10SC-15 1 Single-phase three wire system 1.7 HMV 12SC /4 Body : SUS HMV 14SC /2 Seal : Teflon 2.2 HMV 18SC HMV 02BSC 1/4 10sec 0.4 HMV 03BSC 3/8 Option: 2Way, 2Piece 0.4 HMV 04BSC 1/2 Air 5sec (1/4, 3/8, Single-phase three wire system 0.45 HMV 06BSC 3/4 Water 10(1) 1/2) Body : Brass, Seal : PTFE 0.5 HMV 02BSC-3 1/4 Clean oil 0.42 HMV 03BSC-3 3/8 Gas 3Way, 3Piece 0.45 HMV 04BSC-3 1/2 10sec Single-phase three wire system 0.55 HMV 06BSC-3 3/4 Body : Brass, Seal : PTFE 0.65 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. Process Valve HMV 02BSC Circuit Diagram(HMV-SC) Model Refer to the table above Operating time 2 : 2.5sec 10 : 10sec HMV40SC AC110V Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V Circuit Diagram(HMV-BSC) temperature Ambient temperature HMV-SC : 0~100(No freezing) HMV-BSC : 0~60 50 (Max.) Not available in explosive atmosphere. Electrical entry Allowable voltage Lead wire ±10% (AC), ±5% (DC) KCC Co., Ltd. 97

99 HMV-FL/FLP series PROCESS VALVE Electric Motor Valve Actuated Ball Valve(Flange Type) HMV 15FL HMV 15FL-3T(L) Classi cation Model Flange Pressure range kgf/cm 2 (MPa) Operating time Feature Weight (Kg) HMV 15FL 15A 6.65 HMV 20FL 20A Flange type 7.25 HMV 25FL 25A 2.5sec Single-phase three wire system 8.2 HMV 32FL 32A 10sec Body : SUS 304 (Option:SUS 316) 9.85 HMV 40FL 40A Seal : PTFE HMV 50FL 50A Air Steam 3(0.3) HMV 65FL 65A Water Water 10(1) 10sec 16.8 HMV 15FL-3T(L) 15A Clean oil Air 10(1) 8.7 HMV 20FL-3T(L) 20A Steam 3Way, Flange type 9.2 HMV 25FL-3T(L) 25A 2.5sec Single-phase three wire system 12.2 HMV 32FL-3T(L) 32A 10sec Body : SUS 304 (Option:SUS 316) 16.3 HMV 40FL-3T(L) 40A Seal : PTFE 17.1 HMV 50FL-3T(L) 50A 21.1 HMV 65FL-3T(L) 65A 10sec 29.1 HMV 15FLP 15A 4.9 HMV 20FLP 20A PVC Flange type 4.95 HMV 25FLP 25A Air, Water 0~10(0~1) 2.5sec Single-phase three wire system 5.15 HMV 32FLP 32A Chemical 10sec Body : PP 5.75 HMV 40FLP 40A Seal : FPM 6.05 HMV 50FLP 50A 6.45 If oil is applied, the range of pressure shall be based on 50cst for oil viscosity. HMV32FL AC220V HMV 15FLP Circuit Diagram Model Refer to the table above Operating time 2 : 2.5sec 10 : 10sec Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V temperature Ambient temperature Body connection HMV-FL : 0~150 HMV-FLP : 0~60 Allowable voltage ±10% (AC), ±5% (DC) 50 (Max.) Electrical entry Lead wire HMV-FL : JIS 10K RF HMV-FLP : JIS 10K FF Not available in explosive atmosphere. 98

100 HMV02SC-P ~ 18SC-P series PROCESS VALVE Electric Motor Proportional Control Valve Actuated Ball Valve Classi cation Model Thread Rc(PT) Pressure range kgf/cm 2 (MPa) Feature HMV 02SC-P 1/4 2.3 Weight (Kg) HMV 03SC-P 3/8 2.3 HMV 04SC-P 1/2 Air 2.2 HMV 06SC-P 3/4 Water Water 10(1) 1 PIECE (1/2 ~ 2) 2.3 HMV 10SC-P 1 Hot water Air 10(1) 2 PIECE (1/4, 3/8) 2.4 HMV 12SC-P 1 1/4 Clean oil 2.6 HMV 14SC-P 1 1/2 2.9 HMV 18SC-P Electric Motor Proportional Control Valve Actuated Ball Valve HMV 02SC-P HMV03SC-P - AC220V Model Refer to the table above Rated voltage AC110V : AC110V 50Hz/60Hz AC220V : AC220V 50Hz/60Hz DC12V : DC12V DC24V : DC24V Process Valve Circuit Diagram temperature 0~100(No freezing) Allowable voltage ±10% (AC), ±5% (DC) Ambient temperature 50 (Max.) Seal material Teflon Input signal 4~20mA 1~5V DC Body material SUS 316 Output signal 4~20mA 1~5V DC Not available in explosive atmosphere. KCC Co., Ltd. 99

101 KAMG250~850 series Drain Separator AIR CLEAN UNIT KAMG KAMG Model KAMG : Rc(PT) 1/4 KAMG : Rc(PT) 3/8 KAMG : Rc(PT) 3/8 KAMG : Rc(PT) 1/2 KAMG : Rc(PT) 3/4 KAMG : Rc(PT) 3/4 KAMG : Rc(PT) 1 KAMG : Rc(PT) 1 1/2 KAMG : Rc(PT) 1 1/2 KAMG : Rc(PT) 2 Accessory Without bracket/manual Nil : drain B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Option Nil : None Differential pressure S : indicator Custom made of G thread type available. Standard : KAMG G Thread type : KAMGG Manual drain Auto drain KAFL250~850 series Line Filter Max. operating pressure Min. operating pressure Max. supply pressure Ambient and media temperature Compressed air 10.0kgf/cm 2 (1.0MPa) 1.5kgf/cm 2 (0.15MPa) 15.0kgf/cm 2 (1.5MPa) 2 ~ 60 Filtration Eliminates moisture up to 99% Filter material Life of element Glass fiber When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAMG series lter aims on eliminating waterdrops. KAMG series eliminate water drops up to 99% in the area of inlet pneumatic machinery equipment and in the last stage of using air in the working room. KAMG Series are effective in places such as which do not have to be dry as much with an air dryer. which are not able to install an air dryer because of restrictions. KAFL KAFL Model KAFL : Rc(PT) 1/4 KAFL : Rc(PT) 3/8 KAFL : Rc(PT) 3/8 KAFL : Rc(PT) 1/2 KAFL : Rc(PT) 3/4 KAFL : Rc(PT) 3/4 KAFL : Rc(PT) 1 KAFL : Rc(PT) 1 1/2 KAFL : Rc(PT) 1 1/2 KAFL : Rc(PT) 2 Accessory Nil : Without bracket/manual drain B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Option Nil : None S : Custom made of G thread type available. Standard : KAFL G thread type : KAFLG Manual drain Auto drain Max. operating pressure Compressed air 10.0kgf/cm 2 (1.0MPa) Min. operating pressure 0.5kgf/cm 2 (0.05MPa) Max. supply pressure Ambient and media temperature Filtration Filter material Life of element 15.0kgf/cm 2 (1.5MPa) 5 ~ 60 3 (95% possible filtration particle) Glass fiber When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAFL series installed in the main line improve the function of later dryer. KAFL series prolong the expected life span of precision lter. KAFL series prevent the problems of machinery by eliminating impurities such as moisture, oil and other foreign substances from compressed air

102 KAM250~850 series Mist Separator AIR CLEAN UNIT KAM KAM Model KAM : Rc(PT) 1/4 KAM : Rc(PT) 3/8 KAM : Rc(PT) 3/8 KAM : Rc(PT) 1/2 KAM : Rc(PT) 3/4 KAM : Rc(PT) 3/4 KAM : Rc(PT) 1 KAM : Rc(PT) 1 1/2 KAM : Rc(PT) 1 1/2 KAM : Rc(PT) 2 Accessory Without bracket/manual Nil : drain B : Bracket Auto drain,one touch D : fitting(ø6) Auto drain,nipple Dn : Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Option Nil : None S : Custom made of G thread type available. Standard : KAM G thread type : KAM-G Differential pressure indicator Manual drain Auto drain KAMD250~850 series Micro Mist Separator Max. operating pressure Min. operating pressure Max. supply pressure Ambient and media temperature Filtration Filter material Life of element Compressed air 10.0kgf/cm 2 (1.0MPa) 1.5kgf/cm 2 (0.15MPa) 15.0kgf/cm 2 (1.5MPa) 5 ~ (95% possible filtration particle) Glass fiber When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAM series eliminate micro-particles like rust, carbon of 0.3 or greater by separating oil mist that is difcult to be removed by normal air lters. KAM series are the optimal lter for air source that drives solenoid valves of pilot type, and metal seal type. Air Clean Unit KAMD KAMD Model KAMD : Rc(PT) 1/4 KAMD : Rc(PT) 3/8 KAMD : Rc(PT) 3/8 KAMD : Rc(PT) 1/2 KAMD : Rc(PT) 3/4 KAMD : Rc(PT) 3/4 KAMD : Rc(PT) 1 KAMD : Rc(PT) 1 1/2 KAMD : Rc(PT) 1 1/2 KAMD : Rc(PT) 2 Accessory Without bracket/manual Nil : drain B : Bracket Auto drain,one touch D : fitting(ø6) Auto drain,nipple Dn : Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Option Nil : None Differential pressure indicator S : Custom made of G thread type available. Standard : KAMD G thread type : KAMDG Manual drain Auto drain Max. operating pressure Min. operating pressure Max. supply pressure Ambient and media temperature Filtration Filter material Life of element Compressed air 10.0kgf/cm 2 (1.0MPa) 1.5kgf/cm 2 (0.15MPa) 15.0kgf/cm 2 (1.5MPa) 5 ~ (95% possible filtration particle) Glass fiber When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAMD series separate and remove oil or carbon and dust particles with the size of 0.01 or greater in the air sol state. Accordingly KAMD series is ideal for precision measuring instruments and a clean room by ltering the compressed air. KCC Co., Ltd. 101

103 KAMH250~850 series Free Filter Micro Mist Separator AIR CLEAN UNIT KAMH Manual drain Auto drain KAMH Model KAMH : Rc(PT) 1/4 KAMH : Rc(PT) 3/8 KAMH : Rc(PT) 3/8 KAMH : Rc(PT) 1/2 KAMH : Rc(PT) 3/4 KAMH : Rc(PT) 3/4 KAMH : Rc(PT) 1 KAMH : Rc(PT) 1 1/2 KAMH : Rc(PT) 1 1/2 KAMH : Rc(PT) 2 Max. operating pressure Min. operating pressure Max. supply pressure Ambient and media temperature Filtration Secondary oil mist concentration Life of element Accessory Nil : Without bracket/manual drain B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Compressed air 10.0kgf/cm 2 (1.0MPa) 1.5kgf/cm 2 (0.15MPa) 15.0kgf/cm 2 (1.5MPa) 5 ~ (95% possible filtration particle) Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Option Nil : None Differential pressure S : indicator Custom made of G thread type available. Standard : KAMH G thread type : KAMHG MAX 0.1mg/m 3 (ANR) (At saturation of element oil, less than 0.01mg/m 3 (ANR) {0.008ppm}) When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAD402 series Auto Drain Valve KAMH series are the combination of the usual AM series(0.3) and KAMD series(0.01). KAMH series provide high precision ltration. Therefore KAMH series are compatible to air micro measuring instruments and drying and cleaninglines for precision parts. KAD KAD KAD402-04D-MeP Model KAD : Rc(PT) 1/4 female thread KAD : Rc(PT) 3/8 female thread KAD : Rc(PT)1/2 female thread KAD402-R04 : R(PT) 1/2 male thread KAD402-G04 : G(PF)1/2 male thread KAD402-M30 : M30 male thread Accessory D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass MeF : Metal bowl with flat type sight glass Compressed air Max. operating pressure 10.0kgf/cm 2 (1.0MPa) Min. operating pressure 1.5kgf/cm 2 (0.15MPa) KAD402-04D-MeF Max. supply pressure Ambient and media temperature 15.0kgf/cm 2 (1.5MPa) 5 ~ 60 Port size for drain Life of element One touch fitting (ø6mm), Nipple (Rc(PT)1/8) When pressure drop reaches at 1.0kgf/cm 2 (0.1MPa) KAD402 series drain condensed water in the compressed air line automatically. KAD402 series can be operated manually

104 KAU2000M~6000M series Modular Type Air Unit AIR CLEAN UNIT KAU3000M-03 - KAU 2000M-02 Model KAU2000M-02 : Rc(PT) 1/4 KAU3000M-03 : Rc(PT) 3/8 KAU4000M-04 : Rc(PT) 1/2 KAU4000M-06 : Rc(PT) 3/4 KAU6000M-06 : Rc(PT) 3/4 KAU6000M-10 : Rc(PT) 1 Accessory Nil : Without bracket/manual drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAU3000M-02 - G thread type : KAUG3000M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAU 4000M-04 KAF KAR KAL Filter + Regulator + Lubricator KAU2010M~6010M series Modular Type Air Unit Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filter Regulator Lubricator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 Filtration Standard: 10, Option: 2, 5, 20, 40 Recommended oil Bowl material Structure / Regulator Turbin oil (ISO VG32) Poly-carbonate metal Relief type Air Clean Unit KAU4010M-04 - KAU 2010M-02 Model KAU2010M-02 : Rc(PT) 1/4 KAU3010M-03 : Rc(PT) 3/8 KAU4010M-04 : Rc(PT) 1/2 KAU6010M-06 : Rc(PT) 3/4 KAU6010M-10 : Rc(PT) 1 Accessory Nil : Without bracket/manual drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAU3010M-02 - G thread type : KAUG3010M-02 KAW KAU 4010M-04 KAL Filter regulator + Lubricator Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filter regulator Lubricator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 Filtration Standard: 10, Option: 2, 5, 20, 40 Recommended oil Bowl material Structure / Regulator Turbin oil (ISO VG32) Poly-carbonate metal Relief type KCC Co., Ltd. 103

105 KAU2020M~6020M series Modular Type Air Unit AIR CLEAN UNIT KAU3020M-03 - KAU 2020M-02 Model KAU2020M-02 : Rc(PT) 1/4 KAU3020M-03 : Rc(PT) 3/8 KAU4020M-04 : Rc(PT) 1/2 KAU4020M-06 : Rc(PT) 3/4 KAU6020M-06 : Rc(PT) 3/4 KAU6020M-10 : Rc(PT) 1 Accessory Nil : Without bracket/manual drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAU3020M-02 - G thread type : KAUG3020M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAF KAU 4020M-04 KAR Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Air Filter Regulator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 Filtration Standard: 10, Option: 2, 5, 20, 40 Bowl material Structure / Regulator Poly-carbonate metal Relief type Air Filter + Regulator KAU2030M~4030M series Modular Type Air Unit KAU4030M-04 - Model KAU2030M-02 : Rc(PT) 1/4 KAU3030M-03 : Rc(PT) 3/8 KAU4030M-04 : Rc(PT) 1/2 Accessory Without bracket/manual Nil : drain G : Gauge Auto drain,one touch D : fitting(ø6) Auto drain,nipple Dn : Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAU 4030M-0404 Custom made of G thread type available. Standard : KAU3030M-02 - G thread type : KAUG3030M-02 KAF KAFM KAR Filter + Mist separator + Regulator Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filtration Bowl material Structure / Regulator Filter Mist separator Regulator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAF : 10, KAFM : 0.3 Poly-carbonate, metal Relief type 104

106 KAU2040M~4040M series Modular Type Air Unit AIR CLEAN UNIT KAU3040M-03 - KAU 4040M-04 Model KAU2040M-02 : Rc(PT) 1/4 KAU3040M-03 : Rc(PT) 3/8 KAU4040M-04 : Rc(PT) 1/2 Accessory Without bracket/manual Nil : drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAU3040M-02 - G thread type : KAUG3040M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filter regulator+ Mist separator Filtration Bowl material Structure / Regulator KAU2050M~4050M series Modular Type Air Unit Filter regulator Mist separator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAF : 10, KAFM : 0.3 Poly-carbonate metal Relief type Air Clean Unit KAU4050M-04 - KAU 4050M-04 Model KAU2050M-02 : Rc(PT) 1/4 KAU3050M-03 : Rc(PT) 3/8 KAU4050M-04 : Rc(PT) 1/2 Accessory Nil : Without bracket/manual drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass Custom made of G thread type available. Standard : KAU3050M-02 - G thread type : KAUG3050M-02 KAFM KAFD KAR Mist separator + Micro mist separator + Regulator Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filtration Bowl material Structure / Regulator Mist separator Micro mist separator Regulator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAFM : 0.3, KAFD : 0.01 Poly-carbonate metal Relief type KCC Co., Ltd. 105

107 KAU2060M~4060M series Modular Type Air Unit AIR CLEAN UNIT KAU3060M-03 - KAU 4060M-04 Model KAU2060M-02 : Rc(PT) 1/4 KAU3060M-03 : Rc(PT) 3/8 KAU4060M-04 : Rc(PT) 1/2 Accessory Nil : Without bracket/manual drain G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAU3060M-02 - G thread type : KAUG3060M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAW KAFM KAFD Filter regulator + Mist separator + Micro mist separator Composition Max. supply pressure Max. operating pressure Regulating range Ambient and media temperature Filtration Bowl material Structure / Regulator Filter regulator Mist separator Micro Mist separator 15.kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAF : 10, KAFM : 0.3 KAFD : 0.01 Poly-carbonate metal Relief type KAW2000M~6000M series Modular Type Filter Regulator KAW3000M-03 BG - KAW 4000M-04 Model KAW2000M-02 : Rc(PT) 1/4 KAW3000M-03 : Rc(PT) 3/8 KAW4000M-04 : Rc(PT) 1/2 KAW6000M-06 : Rc(PT) 3/4 KAW6000M-10 : Rc(PT) 1 Accessory Nil : Without bracket/manual drain B : Bracket G : Gauge D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAW3000M-02 - G thread type : KAWG3000M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAW Max. supply pressure 15.0kgf/cm 2 (1.5MPa) Max. operating pressure 9.7kgf/cm 2 (0.97MPa) Regulating range 0.5~8.5kgf/cm 2 (0.05~0.85MPa) Ambient and media temperature 5 ~ 60 Filtration Standard: 10, Option: 2, 5, 20, 40 Bowl material Poly-carbonate metal Structure / Regulator Relief type KAW series are compact type assemblies of a lter and regulator

108 KAF2000M~6000M series Modular Type Air Filter AIR CLEAN UNIT KAF4000M-04 - KAF 4000M-04 00M0 Model KAF2000M-02 : Rc(PT) 1/4 KAF3000M-03 : Rc(PT) 3/8 KAF4000M-04 : Rc(PT) 1/2 KAF4000M-06 : Rc(PT) 3/4 KAF6000M-06 : Rc(PT) 3/4 KAF6000M-10 : Rc(PT) 1 Accessory Nil : Without bracket/manual drain B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAF3000M-02 - G thread type : KAFG3000M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAF KAF (Auto drain) Max. supply pressure 15.0kgf/cm 2 (1.5MPa) Max. operating pressure 9.7kgf/cm 2 (0.97MPa) Regulating range 0.5kgf/cm 2 (0.05MPa) Ambient and media temperature 5 ~ 60 Filtration Standard: 10, Option: 2, 5, 20, 40 Bowl material Poly-carbonate metal KAFM2000M~4000M series Modular Type Mist Separator Air Clean Unit KAFM3000M-03 - KAFM 4000M-04 Model KAFM2000M-02 Rc(PT) 1/4 KAFM3000M-03 Rc(PT) 3/8 KAFM4000M-04 Rc(PT) 1/2 Accessory Nil : Without bracket/ manual drain B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAFM2000M-02 - G thread type : KAFMG2000M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAFM KAFM (Auto drain) Max. supply pressure Max. operating pressure Min. operating pressure Ambient and media temperature Filtration Bowl material 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5kgf/cm 2 (0.05MPa) 5 ~ Poly-carbonate metal KCC Co., Ltd. 107

109 KAFD2000M~4000M series Modular Type Micro Mist Separator AIR CLEAN UNIT KAFD4000M-04 - KAFD4000M-04 00M0 Model Accessory KAFD2000M-02 : Rc(PT) 1/4 Without bracket/manual Nil : KAFD3000M-03 : Rc(PT) 3/8 drain KAFD4000M-04 : Rc(PT) 1/2 B : Bracket D : Auto drain,one touch fitting(ø6) Dn : Auto drain,nipple Rc(PT)1/8 Auto drain Min. pressure:1.5kgf/cm 2 Custom made of G thread type available. Standard : KAFD3000M-02 - G thread type : KAFDG3000M-02 Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAFD KAFD (Auto drain) Max. supply pressure Max. operating pressure Min. operating pressure Ambient and media temperature Filtration Bowl material 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5kgf/cm 2 (0.05MPa) 5 ~ Poly-carbonate metal KAR2000M~6000M series Modular Type Air Regulator KAR3000M-03 BG Model KAR2000M-02 Rc(PT) 1/4 KAR3000M-03 Rc(PT) 3/8 KAR4000M-04 Rc(PT) 1/2 KAR4000M-06 Rc(PT) 3/4 KAR6000M-06 Rc(PT) 3/4 KAR6000M-10 Rc(PT) 1 Accessory Nil : Without bracket / Without gauge B : Bracket G : Gauge KAR 4000M-04 Custom made of G thread type available. Standard : KAR2000M-02 - G thread type : KARG2000M-02 Max. supply pressure 15.0kgf/cm 2 (1.5MPa) IN KAR OUT Max. operating pressure Regulating range Ambient and media temperature Port size for gauge Structure 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAR2000 KAR3000 KAR4000 KAR6000 Rc(PT) 1/8 Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 1/4 Relief type 108

110 KAR2000T~6000T series T Type Air Regulator AIR CLEAN UNIT KAR3000T-03 BG Model KAR2000T-02 Rc(PT) 1/4 KAR3000T-03 Rc(PT) 3/8 KAR4000T-04 Rc(PT) 1/2 KAR4000T-06 Rc(PT) 3/4 KAR6000T-06 Rc(PT) 3/4 KAR6000T-10 Rc(PT) 1 Accessory Nil : Without bracket / Without gauge B : Bracket G : Gauge Custom made of G thread type available. Standard : KAR2000T-02 - G thread type : KARG2000T-02 KAR2000T-02 Max. supply pressure Max. operating pressure Regulating range KAR Ambient and media temperature Port size for gauge IN OUT Structure KAL2000M~6000M series Modular Type Air Lubricator 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5~8.5kgf/cm 2 (0.05~0.85MPa) 5 ~ 60 KAR2000 KAR3000 KAR4000 KAR6000 Rc(PT) 1/8 Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 1/4 Relief type Air Clean Unit KAL4000M-04 Model KAL2000M-02 Rc(PT) 1/4 KAL3000M-03 Rc(PT) 3/8 KAL4000M-04 Rc(PT) 1/2 KAL4000M-06 Rc(PT) 3/4 KAL6000M-06 Rc(PT) 3/4 KAL6000M-10 Rc(PT) 1 Accessory Nil : Without bracket B : Bracket Bowl style Nil : PC bowl MeP : Metal bowl with pipe type sight glass KAL 4000M-04 00M-04 Custom made of G thread type available. Standard : KAL2000M-02 - G thread type : KALG2000M-02 KAL Max. supply pressure Max. operating pressure Min. operating pressure Ambient and media temperature Recommended oil Bowl material 15.0kgf/cm 2 (1.5MPa) 9.7kgf/cm 2 (0.97MPa) 0.5kgf/cm 2 (0.05MPa) 5 ~ 60 Turbin oil (ISO VG32) Poly-carbonate metal KCC Co., Ltd. 109

111 AD200~400 series Auto Drain Kit AIR CLEAN UNIT AD400 AD 200 AD 300 Model AD200 : 1/4 Body size AD300 : 3/8 Body size AD400 : 1/2 Body size Accessory Nil : One touch(ø6) N : Nipple Rc(PT)1/8 AD 400 Auto drain Classi cation AD 200 AD 300, 400 Max. operating pressure Compressed air 10.0kgf/cm 2 (1.0MPa) Min. operating pressure 1.0kgf/cm 2 (0.1MPa) 1.5kgf/cm 2 (0.15MPa) Max. supply pressure 15.0kgf/cm 2 (1.5MPa) Ambient and media temperature 5~ ~ 60 Auto drain connection 4mm 6mm / Rc(PT)1/8 Pressure to close drain 0.5kgf/cm 2 Pressure to open drain 0.5kgf/cm 2 Convenient use by attached one-touch fitting Auto drain for both automatic and manual operation Various choice of drain port size. G40, G50 series Gauge G G Model G Rc(PT) 1/8 G Rc(PT) 1/4 G Model Pressure range Applicable model Weight(g) G ~10.0kgf/cm 2 (0~1.0MPa) KAR2000, KAW2000 KAU2000, 2010, 2020, 2030, 2040, 2050, 2060 KAR3000, KAW3000 KAU3000, 3010, 3020, 3030, 3040, 3050, G ~10.0kgf/cm 2 (0~1.0MPa) KAR4000, KAW4000 KAR6000, KAW6000 KAU4000, 4010, 4020, 4030, 4040, 4050, 4060 KAU6000,

112 BRACKET series Bracket For Air Unit AIR CLEAN UNIT Model B250 Applicable model 250Series (KAFL, KAM, KAMD, KAMH, KAMG) B Series (KAFL, KAM, KAMD, KAMH, KAMG) B Series (KAFL, KAM, KAMD, KAMH, KAMG) B Series (KAFL, KAM, KAMD, KAMH, KAMG) B Series (KAFL, KAM, KAMD, KAMH, KAMG) B350 B300 B850 B Series (KAFL, KAM, KAMD, KAMH, KAMG) KAF2000, KAL2000, KAFM2000, KAFD2000 B300 KAF3000, KAL3000, KAFM3000, KAFD3000 B400 KAF4000, KAL4000, KAFM4000, KAFD4000 B600 KAF6000, KAL6000, KAW6000 B220 KAR2000, KAW2000 B320 KAR3000, KAW3000 B320 B310L B420 KAR4000, KAR6000, KAW4000 B310L KAU3000M, 3030M, 3050M, 3060M B410L KAU4000M-04, 4030M-04, 4050M-04, 4060M-04 B510L KAU4000M-06, 4030M-06, 4050M-06, 4060M-06 B610L KAU6000M B210T KAU2000M, 2010M~2060M B310T KAU3010M, 3020M, 3040M B210T KWS series Water Separator B410T B610T KAU4010M, 4020M, 4040M KAU6010M KWS Air Clean Unit Model KWS Rc(PT) 1/4 KWS Rc(PT) 3/8 KWS Rc(PT) 1/2 KWS Rc(PT) 3/4 Accessory Nil : Auto drain(ø6) Dn : Auto drain,nipple Rc(PT)1/8 M : Manual drain KWS KWS Manual drain Auto drain Type KWS KWS KWS KWS Max. dispacth volume 200 /min 300/min 600/min Pressure dropping Operating pressure range Max. supply pressure Ambient and media temperature Drain type 0~0.25kgf/cm 2 (0~0.025MPa) 1~10.0kgf/cm 2 (0.1~1.0MPa) 12.0kgf/cm 2 (1.2MPa) -20 ~ 50 For both auto and manual drain Thread air line Rc(PT)1/4 Rc(PT)3/8 Rc(PT)1/2 Drain port Ø6 One touch fitting Dimmension (mm) Ø Ø Ø Weight 0.4kg 0.75kg 1.1kg No element, no need of spare parts Performance does not vary with the change of air capacity. Rate of moisture elimination : 99.99% Performance does not vary with the intake of water. Rate of oil : 99.99% Simple structure and no mulfuntion problem Low pressure drop Signi cant reduction of bacteria (No sterilizing function) No need of maintenance, no replacement parts (Except for drain valve) Get rid of problems caused by solenoid valve Compact size, yet handle large ow capacity. No need of power supply Semipermanent life (except drain valve) Light weight Maintain 100% of initial performance with its semipermanent life. In case of pneumatic application, air dryer and after cooler can be omitted Have better performance than using water separator and oil separator together Extended the life compare with expensive lter. KCC Co., Ltd. 111

113 KDHR series Refrigerated Air Dryer (Air Cooled Type) Specially designed and produced heat exchanger for compressed air with high temperature and humidity to clean air without minute moisture by rapid refrigerating cycles. Easy disassembling case serves for easy cleaning, A/S and maintenance. KDHR-W series Refrigerated Air Dryer (Water Cooled Type) Uses self-designed heat exchanger for a stable dew point. Water cooled type condenser refrigerates and maintains a stable refrigeration throughout four seasons. Series KDHR : Refrigenrated air dryer KDHR - 5 AIR DRYER Body size 5, 7, 10, 15, 20, 30, 50, 75, 100, 150, 200, 250, 300, 400, 500, 600, 800 Model Flow capacity(nm 3 /min) In/out port Electricity 60Hz 50Hz Rc(PT) V A Kw Weight (kg) KDHR /4" (S) KDHR /4" (S) KDHR /4" (S) KDHR /4" (S) AC Ph KDHR " (S) V KDHR " (S) 60Hz KDHR " (S) KDHR " (S) KDHR " (S) KDHR " (F) KDHR " (F) KDHR " (F) AC KDHR " (F) 3Ph V/380V KDHR " (F) /440V KDHR " (F) 60Hz KDHR " (F) KDHR " (F) In/out port : (S) Screw type, (F) Flange type Dew point Operating pressure Inlet temp. Ambient temp. Condenser 1.7~4 7.0kg/cm 2 (0.7MPa) Max:9.9kg/cm 2 (0.99MPa) Air ~40 Air Cooled Type The flow capacities are based on 7.0kgf/cm 2 (0.7MPa) of inlet pressure, 38of inlet temperature, 38of ambient temperature, 4of operation dew point. Series KDHR : Refrigenrated air dryer Body size 400, 500, 600, 750, 900, 1200, 1500, 2000, 3000, 4000, 5000, 6000 Model Flow capacity (Nm 3 /min) 60Hz KDHR W 50Hz In/out port (Air) Rc(PT) Type W : Water cooled type In/out port (Out) Rc(PT) Quantity of cooling water (/min) Frozen compressor (HP) Weight (Kg) KDHR-400W "(F) 1 1/2"(S) 53/ /2 640 KDHR-500W "(F) 2"(S) 64/ KDHR-600W "(F) 2"(S) 80/ KDHR-750W "(F) 2"(S) 105/ KDHR-900W "(F) 2 1/2"(F) 158/ KDHR-1200W "(F) 2 1/2"(F) 183/ KDHR-1500W "(F) 2 1/2"(F) 210/ KDHR-2000W "(F) 3"(F) 265/ KDHR-3000W "(F) 3"(F) 424/ KDHR-4000W "(F) 4"(F) 530/ KDHR-5000W "(F) 5"(F) 636/ KDHR-6000W "(F) 5"(F) 795/ In/out port : (S) : Screw type, (F) Flange type Freon Gas R22 Dew point 1.7 ~4 Max. operating pressure 9.9kg/cm 2 (0.95MPa) Inlet temp. Ambient temp. Air ~45 Condenser Water Cooled Type Electricity AC 3Ph 220V/380V/440V 60Hz The flow capacities are based on 7.0kgf/cm 2 (0.7MPa) of inlet pressure, 38of inlet temperature, 17~30of cooling water inlet temperature, 2kgf/cm 2 (0.2MPa) ~ 4.5kgf/cm 2 (0.45MPa) of cooling water pressure range and 4of operation dew point

114 KDHT series Refrigerated Air Dryer (High Temperature Type) Series KDHT : Refrigenrated air dryer KDHT - 5 Body size 5, 7, 10, 15, 20, 30, 50 AIR DRYER Model Flow Capacity (Nm 3 /min) In/out port 60Hz 50Hz Rc(PT) Freon Gas Weight (kg) KDHT /4" (S) 52 KDHT /4" (S) 54 R-134a KDHT /4" (S) 56 KDHT /4" (S) 67 KDHT " (S) 93 KDHT " (S) R22 98 KDHT " (S) 130 In/out port : (S) : Screw type, (F) Flange type This combination including after cooler is easy to be installed in small spaces and to be piped. Dew point Operating pressure Inlet temp. Electricity 4 7.0kg/cm 2 (0.7MPa) Max: 9.9kg/cm 2 (0.99MPa) Air 55 Max: 80 1Ph 220V 60Hz The flow capacities are based on 7kgf/cm 2 (0.7MPa) of inlet pressure, 38of inlet temperature, 38of ambient temperature, 4of operationdew point. KDAH series Desiccant Air Dryer (Heatless Type) Series KDAH : Desiccant air dryer KDAH - 5 Body size 5, 7, 10, 15, 20, 30, 50, 75, 100, 130, 150, 170, 200, 250, 300, 400, 450, 500, 600, 750, 900 Air Dryer KDAH series are universal products with reliable dew point under -40 (ATM), suitable performance for all seasons and easy maintenance. Model Flow Capacity (Nm 3 /hr) In/out port Rc(PT) Gel/2Tower (kg) Weight (kg) KDAH /2"(S) KDAH /2"(S) KDAH /4"(S) KDAH "(S) KDAH "(S) KDAH /2"(S) KDAH /2"(S) KDAH /2"(S) KDAH "(S) KDAH "(S) KDAH "(S) KDAH /2"(F) KDAH /2"(F) KDAH "(F) KDAH "(F) KDAH "(F) KDAH "(F) KDAH "(F) KDAH "(F) KDAH "(F) KDAH "(F) In/out port : (S): Screw type, (F) Flange type The flow capacity are based on 38ofinlet temperature, 7kgf/cm 2 (0.7MPa) of standard pressure, -40 of dew point below atmosphere temperature. KCC Co., Ltd. 113

115 KDAE series AIR DRYER Desiccant Air Dryer (Heater Type) KDAE - 20 Series KDAE : Desiccant air dryer Body size 20, 40, 50, 75, 100, 130, 150, 200, 250, 280, 300, 400, 500, 600, 750, 900, 1200, 1500, 2000 KDAE Series are designed for reliable dew point under 70 (ATM) with minimizing overheating of heater. 2way Butterfly valve is installed in all products. Dehumidication time can be extended regarding to load. KDAE-S series Model Flow Capacity (Nm 3 /hr) In/out port Rc(PT) Gel/2Tower (kg) Heater (kw) Weight (kg) KDAE "(S) KDAE /2"(S) KDAE /2"(S) KDAE /2"(S) KDAE "(S) KDAE "(S) KDAE /2"(F) KDAE /2"(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) KDAE "(F) In/out port: (S): Screw type, (F) Flange type. The flow capacities are based on 7.0kgf/cm 2 (0.7MPa) of inlet pressure, 38 of inlet temperature, 38 of ambient temperature and 4 C of operation dew point. ambient temperature and 4 of operation dew point. Desiccant Air Dryer (Skid type) KDAE - 20 S Series KDAE : Desiccant air dryer Type S : Skid type Body size 50, 75, 100, 130, 150, 200, 250, 300, 400, 500, 600, 750, 1550, 3000, 4100 Model Flow Capacity (Nm 3 /hr) In/out port Rc(PT) Gel/2Tower (kg) Heater (kw) Weight (kg) KDAE-50S / KDAE-75S / KDAE-100S KDAE-130S KDAE-150S / KDAE-200S / KDAE-250S KDAE-300S KDAE-400S KDAE-500S KDAE-600S The absorption Skid type guarantees a performance of more than -40(ATM) of dew point and is designed to minimize the overheating of the heater. The Pre- lter and the After- lter are manufactured as skid types. Piping work in the eld is very easy. KDAE-750S KDAE-1550S KDAE-3000S KDAE-4100S

116 KDAO series Desiccant Air Dryer (Oilless Type) Series KDAO : Desiccant air dryer KDAO - 5 AIR DRYER Body size 5, 7, 10, 20, 30, 40, 50, 75, 100, 130, 150, 170, 200, 250, 300, 400, 450, 500, 600, 750, 900 KDAO series aim at removing oil mist. Therefore lifetime of desiccant is extended. Regarding the limit of dew point, this series can be produced as heatless as well as heater type. KDAB series Desiccant Air Dryer (Heater Blower Type) Model Flow Capacity (Nm 3 /hr) Series KDAH : Desiccant air dryer In/out port Rc(PT) KDAB SOMA (kg) Gel/2Tower (kg) Weight (kg) KDAO /2"(S) KDAO /2"(S) KDAO /4"(S) KDAO "(S) KDAO "(S) KDAO /2"(S) KDAO /2"(S) KDAO /2"(S) KDAO "(S) KDAO "(S) KDAO "(S) KDAO /2"(F) KDAO /2"(F) KDAO "(F) KDAO "(F) KDAO "(F) KDAO "(F) KDAO "(F) KDAO "(F) KDAO "(F) KDAO "(F) In/out port: (S) Screw type, (F) Flange type Body size 110, 130, 150, 200, 250, 280, 300, 400, 500, 600, 750, 1200, 1500, 2000 Air Dryer KDAB Series use the method of recycling the absorbent by sucking the external air with a blower. They are energy-saving air dryer using only a minimum of compressed air. Period of dehumidication might be extended depending on the load applied. Model Flow Capacity In/out port Electricity Gel/2Tower (Nm 3 /hr) Rc(PT) Heater (kw) Blower (Hp) (kg) Weight (kg) KDAB '' KDAB /2'' KDAB /2'' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KDAB '' KCC Co., Ltd. 115

117 KDNP series Desiccant Air Dryer (Non-Purge Type) KDNP AIR DRYER Series KDNP : Desiccant air dryer Body size 1100, 1550, 2100, 3000, 4100, 5400, 6000, 7000, 9000 KDNP Series regenerate desiccant using waste heat from compressor (approx. 150) This energy saving air dryers have no compressed air into dryer inlet after desiccant regeneration. Dehumidi cation time can be extended regarding to load. Model Flow Capacity (Nm 3 /hr) In/out port (Flange) Gel/2Tower (kg) Weight (kg) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDNP ''(F) KDH-C series After Cooler Series KDH-C : After cooler KDH-C Body size 1C, 2C, 3C, 4C, 5C, 6C, 7C, 8C, 9C, 10C, 11C, 12C After Cooler is an essential refrigeration support unit, installed in front of an air dryer to cool hot and humid air for high ef ciency without malfunction. Easy installment and maintenance without cooling water. Minimized noise for calm operation. Model Flow Capacity (Nm 3 /hr) 60Hz 50Hz In/out port Rc(PT) Max. pressure (kg/cm 2 ) Inlet Temp () Ambient temp. () Fan (Ø) Fan motor (W) Electricity Weight (kg) KDH-1C /4"(S) AC 1Ph 220V 60Hz 23 KDH-2C "(S) AC 1Ph 220V 25 60Hz AC 3Ph KDH-3C /2"(S) V/440V 35 option KDH-4C " KDH-5C KDH-6C /2"(F) 3"(F) 9.9kg/ cm (0.99MPa) 350X2 400X KDH-7C "(F) 500X AC 3Ph 159 KDH-8C "(F) 550X V/380V 180 KDH-9C "(F) 650X Hz 240 KDH-10C "(F) 500X KDH-11C "(F) 600X KDH-12C "(F) 650X In/out port : (S) Screw type, (F) Flange type Flow capacities are based on 7.0kgf/cm 2 (0.7MPa) of inlet pressure, 38 of inlet temperature, 30~45of ambient temperature, and 30(P 8) of outlet temperature

118 SEPREMIUM series AIR DRYER Oil-Water Separator SEPREMIUM - 10 Series SEPREMIUM : Oil-water separator Capacity(m 3 /min) 10, 20, 30 Model Capacity (m 3 /min) Connection Dimension(mm) In Out L W H SEPREMIUM /2" 1" SEPREMIUM /2" 1" SEPREMIUM /2" 1" Indicator In/out port Oil-water separator is designed for ef cient removal of oil by high performed separation of mass moisture and oil in compressed air. Easy installment. Easy maintenance and repair. Condensed water discharging by intelligent drain. Air Dryer KCC Co., Ltd. 117

119 KDRT series AIR DRYER Receiver Tank KDRT Series KDRT : Receiver tank Body size 500, 800, 1000, 1500, 2000, 3000, 5000, 8000, 10K, 20K, 30K, 56K As the air discharged from the compressor has a certain wavelength, a service tank should be installed at the outlet in order to supply air at a constant pressure without pulsation. The capacity of tank is decided by the usage and capacity of compressor, working pressure and etc. Tanks should be produced in accordance with the Occupational Safety and Health Act. Therefore, only the tanks which are inspected and approved by Korea Occupational Safety and Health Agency can be used. EZ-1 series Electrical Trap (Timer Valve) Model Flow Capacity Dimension(mm) (m 3 ) In/out port Diameter Height Weight (kg) KDRT-500-A 0.5 PT 50A KDRT-800-A 0.8 PT 50A KDRT-1000-A 1.0 PT 50A KDRT-1500-A 1.5 PT 50A KDRT-2000-A 2.0 FL 80A KDRT-3000-A 3.0 FL 80A KDRT-5000-A 5.0 FL 100A KDRT-8000-A 8.0 FL 125A KDRT-10K 10.0 FL 150A KDRT-20K 20.0 FL 200A KDRT-30K 30.0 FL 250A KDRT-56K 56.0 FL 350A Model above are based on 9.9kgf/cm 2 (0.99MPa) of working pressure. Contact us for other specifications. Easy to install Large orice (4.0mm) to prevent blockage. Use FPM (Viton) seal. Valve port size: 1/2" BSP or NPT Standard operating pressure 0-16 bar KDHAD series Auto Trap Timer Operating interval min, Adjustable Valve open time sec, Adjustable Manual switch Micro switch Supply voltage 230 VAC/DC, 50/60Hz Current consumption Max. 7mA Operation temp. -40~60 (-40~140) Protect class IP 65 Material ABS plastic FR grade UL94Vo Connection DIN 43650A ISO 440/ LED (Yellow) Display ON Display 1 LED (Yellow) Display OFF Allowable voltage ± 10% Valve Operation 2/2 WAY Direct acting IN/OUT port 1/2'' BSP Operating pressure 0~16.3kgf/cm 2 (0~1.63MPa) Ambient temp Seal material FPM (Viton) temp. Max. 90 C (194 F) Material Brass Insulation class Grade F. Protect class IP 65 Ori ce 4.0 mm Voltage 230VAC 50/60 Hz Allowable voltage ±10% KDHAD Series KDHAD : Auto trap Body size 125, 300 KDHAD-300 KDHAD-125 Model In/Out port Operating pressure kgf/cm 2 (MPa) Max.Pressure kgf/cm 2 (MPa) Inlet Temp KDHAD-125 Rc(PT)1/2'' 1.5~9.9(0.15~0.99) 13(1.3) 60 KDHAD-300 M30 1.5~9.9(0.15~0.99) 13(1.3) 60 Automatically discharge the condensate of compressed air from air compressor, receiver tank, after cooler, air dryer and etc

120 KDXF series AIR DRYER High Performance Air Filter Series KDXF : High performance air filter KDXF 320 Type 370 : Main Filter(20) 320 : Pre Filter(3) 310 : Line Filter(1) 130 : Coalescent Filter(0.01) 150 : Adsorbent Filter(0.01ppm) In/out port 15A 1/2 100A 4 20A 3/4 125A 5 25A 1 150A 6 40A 1 1/2 200A 8 50A 2 250A 10 65A 2 1/2 300A 12 80A 3 KCC Air Filters can remove particles and moisture. Air filters with HEPA element have high efficiency against minute, blazed and carbonized particles from air compressor. Stainless made screen solves corrosion problem and gives long service life. Model In/out port Rc(PT) Flow Capacity (Nm 3 /min) Main Filter Pre Filter Line Filter Coalescent Filter Adsorbent Filter Weight (kg) 370(20) 320(3) 310(1) 130(0.01) 150(0.01ppm) KDXF-15A 1/2'' (S) KDXF-20A 3/4'' (S) KDXF-25A 1'' (S) KDXF-40A 1 1/2'' (S) KDXF-50A 2'' (S) KDXF-65A 2 1/2'' (F) KDXF-80A 3'' (F) KDXF-100A 4'' (F) KDXF-125A 5'' (F) KDXF-150A 6'' (F) KDXF-200A 8'' (F) KDXF-250A 10'' (F) KDXF-300A 12'' (F) In/out port: (S) Screw type, (F) Flange type KDXE series High Performance Filter Element KDXE A Air Dryer Series KDXE : High performance filter element Type 370 : Main Filter(20) 320 : Pre Filter(3) 310 : Line Filter(1) 130 : Coalescent Filter(0.01) 150 : Adsorbent Filter(0.01ppm) In/out port 15A 1/2 20A 3/4 25A 1 40A 1 1/2 50A 2 KDXE370 KDXE320 KDXE310 KDXE130 KDXE150 Model Maintainance Filtering Main Pre Line Coalescent Adsorbent KDXE-370, 320 KDXE-310 KDXE-130 KDXE-150 Clean with neutral cleanser Totally remove solid substance above 20. Change cartridge Change cartridge Change cartridge Totally remove solid substance above 1. Totally remove solid substance above 0.1. Material Sintered resin Hepa Hepa / Polyester Service Condensed water, oil, rust and 20 and over size particle Air tool and instrument Spray paint & oil mist 99% removal. Passing scent Totally remove solid substance above Hepa / Polyester / Active Carbon paper Oil mist. High quality electrical appliance, semiconductor process and pharmaceutical factory KCC Co., Ltd. 119

121 KPA/KUPA series Industrial Shock Absorber (Adjustable Type) SHOCK ABSOBER & GAS SPRING KUPA Adjustable(Standard) Cap KPA KUPA Without cap (Only M12, M14, M16, M20, M25, M27) With cap (M12, M14, M16, M20, M25, M27 Standard have urethane cap.) (M36, M42, M64, M85 Standard have a steel cap. Urethane cap is option part.) Outer dia. & Stroke 1210 M12XP1.0 10mm 1410 M14XP1.5 10mm 1612 M16XP1.5 12mm 2015 M20XP1.5 15mm 2525 M25XP1.5 25mm 2725 M27XP30 M27XP1.5 25mm 3035 M30XP1.5 35mm 3625 M36XP1.5 25mm mm mm 4250 M42XP1.5 50mm mm mm M64XP mm mm mm mm M85XP mm mm Finishing Nil : Black oxide coating N : Nickel plating Option Lock nut M08~M36 (Basic : include 2ea) Nil Lock nut M42~M85 (Basic : include 1ea) Stop collar S (Only M14~M85) Square flange F (Only M36,M42,M64,M85) Rectangular flange R (Only M36, M42, M64) Urethane cap U (Only M36,M42,M64,M85) Adjustable(Medium) di Adjustable(Large) User can adjust impact absorbed range with dampening adjustable dial(360 ) according to impact velocity. Rapid returning piston rod by specially designed spring for next cycle. Surface of outer tube and piston rod plate with chrome that prohibits corrosion and scratches for a longer life. Available attachment to any position. Shock Absorber allows higher productivity by increasing accelerated velocity Saves production costs by extending the equipment life. Improves working efficiency by decreasing noise in factory. Maintains better quality to prevent damage of goods Model Total energy [MAX] (Nm) Total energy per hour [MAX] (Nm/h) Effective weight [MIN~MAX] (kg) Shock force [MAX] (N) Return force [MIN ~MAX] (N) Weight (g) KPA , ~ ~10 45 KUPA , ~ ~10 50 KPA , ~ ~11 55 KUPA , ~ ~11 65 KPA , ~200 1,000 7~ KUPA , ~200 1,000 7~ KPA , ~220 1,160 8~ KUPA , ~220 1,160 8~ KPA , ~1,300 3,800 15~ KUPA , ~1,300 3,800 15~ KPA , ~1,300 3,800 15~ KUPA , ~1,300 3,800 15~ KUPA ,000 15~1,950 5,000 30~ KUPA ,000 17~2,450 6,000 40~ KUPA ,000 34~4,900 6,000 25~ KUPA ,000 25~7,000 2,400 50~85 1,000 KUPA ,500 45~10,000 2,400 35~75 1,300 KUPA ,000 55~10,500 2,400 35~100 1,600 KUPA , ,000 70~16,000 3,300 80~165 3,500 KUPA , , ~19,000 3,300 75~210 4,700 KUPA , , ~26,500 3,300 95~360 6,100 KUPA , , ~34,000 66, ~200 6,300 KUPA , , ~40,000 66, ~210 7,300 KUPA , , ~45,000 66,000 90~210 8,900 KUPA ,100 1,150, ~50,000 66,000 90~400 10,900 Max. impact velocity Ambient temperature Lock nut include 2ea 3.5 m/sec -10~

122 KSCA series Industrial Shock Absorber (Non-Adjustable Type) SHOCK ABSOBER & GAS SPRING KSCA Non-adjustable (Small) Outer Dia. Stroke 08 M8XP mm 10 M10XP mm 12 M12XP mm 14 M14XP1.0 (M14XP1.5 ) 20 M20XP M25XP mm mm mm mm mm mm mm mm mm 36 M36XP mm Order made : outer dia. M14XP1.5 Cap Nil B With out cap (Only M08, M10, M12, M14, M20) With cap (KSCA2030~KSCA3680 : Standard have urethane cap basically) Damping constant 1 : Soft 2 : Standard 3 : Hard Deliver the standard type if there is no choice Finishing Nil Black oxide coating N Nickel plating M08~M12 : Basic nickel plating Non-adjustable (Long stroke) Non-adjustable (Medium) Shock absorber made to stop smooth and quiet using a unique design for multiple orifice structure. When injection mold inject as well as collide against robot with high speed. Nonadjustable shock absorber makes impact energy exhale to heat energy in a short time Shock Absorber allows higher productivity by increasing accelerated velocity Saves production costs by extending the equipment life. Improves working efficiency by decreasing noise in factory. Maintains better quality to prevent damage of goods. Model Total energy [MAX] (Nm) KSCA ,000 KSCA ~4 15 KSCA KSCA , ~6 25 KSCA KSCA ,000 KSCA ,050 5~10 40 KSCA KSCA , ,300 7~11 65 KSCA KSCA KSCA , ,300 7~12 80 KSCA KSCA KSCA , ,900 10~ KSCA KSCA2030B-1 10 KSCA2030B , ,900 10~ KSCA2030B-3 32 KSCA2050B-1 10 KSCA2050B , ,900 10~ KSCA2050B-3 32 KSCA2525B-1 20 KSCA2525B , ,000 20~ KSCA2525B KSCA2530B-1 30 KSCA2530B , ,000 10~ KSCA2530B KSCA2550B-1 30 KSCA2550B , ,000 20~ KSCA2550B KSCA2580B-1 30 KSCA2580B , ,000 20~ KSCA2580B KSCA3680B-1 KSCA3680B ,000 1,000 5,000 25~ KSCA3680B-3 Max. impact velocity 4 m/sec Ambient temperature -10~60 Lock nut include 2ea Total energy per hour [MAX] (Nm/h) Effective weight [MIN~MAX] (kg) Shock force [MAX] (N) Return force [MIN ~MAX] (N) Weight (g) Shock Absorber & Gas Spring KCC Co., Ltd. 121

123 KCSC series Costant Speed Controller SHOCK ABSOBER & GAS SPRING KCSC 15 Model KCSC : Constant speed controller Stroke 15 : 15mm 30 : 30mm 50 : 50mm KCC has 3 kinds of KCSC models which control the speed of both, light and heavy loads with smooth and consistent capacities. They are available in stroke lengths of 15mm, 30mm and 50mm with capacities from 2.5Kg to 255Kg force. KCC KCSC models are hermetically sealed and can be operated in any position for a long time operation without any leakage and can control the moving devices with easy and diverse by using adjustable dial. KBG series Gas Spring W40 W30 B21 Propelling force (N) Model KCSC15 KCSC30 KCSC50 Stroke Min Max. 3,500 3,500 3,500 Return force (N) Min Max Return force (Sec) Max. acceptance angle ( ) Material Body Steel(Nickel plating) Piston rod Special steel(chrominum plating) Range of Impact Velocity 0.01m/s~0.65m/s Ambient Temperature -10~60 Adjustment Adjustment knob located at rear. 0 is soft and 30 is hard. KBG - W End fitting type W10 : Straight (ø6 X 3T) W20 : Straight (ø8 X 3T) W30 : Straight (ø6 X 5T) W40 : Type (ø10) W50 : Type (ø8 X10T) B20 : Metal ball socket B21 : Penetration hinge (ø8x10t) B22 : Plastic ball socket Cylinder outer dia. 15 : ø15 18 : ø18 22 : ø : ø27.4 Max. length Refer to Specifications Force Refer to Specifications End fitting type Cylinder outer dia. Piston rod outer dia. Max. Length Stroke Force Calculation method W10 W20 W30 W40 W50 B20 B21 B22 ø15 ø6 160~500 52~222 3~30 ø18 ø8 160~800 46~366 5~30 ø15 ø6 180~510 57~222 3~30 ø18 ø8 180~800 51~361 5~30 ø18 ø8 5~50 ø22 ø10 180~800 51~361 10~80 ø27.4 ø ~100 ø22 ø10 180~800 52~362 ø27.4 ø ~120 ø18 ø8 5~50 ø22 ø10 200~800 54~354 10~100 ø27.4 ø ~120 ø18 ø8 5~50 ø22 ø10 180~800 48~358 10~100 ø27.4 ø ~120 ø18 ø8 5~50 ø22 ø10 180~800 46~356 10~100 ø27.4 ø ~120 ø18 ø8 5~50 ø22 ø10 180~800 50~360 10~80 ø27.4 ø ~80 Max. length after specifying stroke = (Stroke+28) X2~500 Max. stroke after specifying max. length = 52~Max. length/2-28 Max. length after specifying stroke = (Stroke+34) X2~800 Max. stroke after specifying max. length = 46~Max. length/2-34 Max. length after specifying stroke = (Stroke+33) X2~510 Max. stroke after specifying max. length = 57~Max. length/2-33 Max. length after specifying stroke = (Stroke+39) X2~800 Max. stroke after specifying max. length = 51~Max. length/2-39 Max. length after specifying stroke = (Stroke+39) X2~800 Max. stroke after specifying max. length = 51~Max. length/ ~100 Max. length after specifying stroke = (Stroke+38) X2~800 Max. stroke after specifying max. length = 52~Max. length/2-38 Max. length after specifying stroke = (Stroke+46) X2~800 Max. stroke after specifying max. length = 54~Max. length/2-46 Max. length after specifying stroke = (Stroke+42) X2~800 Max. stroke after specifying max. length = 48~Max. length/2-42 Max. length after specifying stroke = (Stroke+44) X2~800 Max. stroke after specifying max. length = 46~Max. length/2-44 Max. length after specifying stroke = (Stroke+40) X2~800 Max. stroke after specifying max. length = 50~Max. length/

124 FJ series VACUUM EQUIPMENT FJ - DM series Compact Vacuum Pad Bellows Flat Pad style Basic Bellows Flat KDS series Vacuum Pad DM Pad inner diameter Pad size Basic Bellows Flat Pad material NBR (Black) Silicon (Red) Urethane (Blue) Viton (Clear) Basic Bellows Flat Elliptical Vacuum Equipment KDS - 6 R Pad inner diameter Pad size Basic Bellows Flat Elliptical Pad style Nil : Basic B : Bellows F : Flat E : Elliptical Pad material R : NBR (Black) S : Silicon (Red) U : Urethane (Blue) V : Viton (Clear) KCC Co., Ltd. 123

125 DSA, DSU, DSC, DSD series VACUUM EQUIPMENT Basic Bellows Flat Elliptical Stroke Diameter Stroke NBR Diameter Silicon Stroke Viton Diameter Urethane Stroke Diameter Stroke DSA, DSB, DSU, DSC, DSD, DSG series Vacuum Unit Model Pad style Basic Bellows Flat Elliptical Material DSA1 Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) DSA2 DSA3 Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) DSB1 Inner dia.(ø) 60 ~ ~ Stroke(mm) DSB2 Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) NBR DSB3 Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Silicon Stroke(mm) Viton DSU Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Urethane Stroke(mm) DSC Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) 5 ~ ~ 70 5 ~ ~ 50 DSD DSG Inner dia.(ø) 10 ~ ~ ~ 40 20X50, 30X60 Stroke(mm) 5 ~ 70 5 ~ 50 5 ~ ~ 50 Inner dia.(ø) 20 ~ ~ X50, 30X60 Stroke(mm) 15 ~ ~ ~

126 KSV series VACUUM EQUIPMENT Vacuum Ejector KSV - 10 HS - - Series KSV : Vacuum ejector Vacuum level HS : Above -86.6kPa LS : Above -53.3kPa Body material Nil : Aluminium (Standard) S : Stainless steel T : Teflon Nozzle diameter 5 : Ø : Ø : Ø : Ø2.0 Vacuum switch Nil : None (Standard) C : Fixed CK : Adjustable Ambient temperature Lubrication Pressure range Switch Air 0 ~ 60 Not required 1.0 ~ 9.9kgf/cm 2 (0.1 ~ 0.99MPa) Nil: None, C: Fixed switch, CK: Adjustable switch Model Nozzle diameter Suction capacity Max. vacuum pressure Air consumption Pressure supply mm /min(anr) -kpa /min(anr) MPa KSV-05 KSV-10 KSV-15 KSV-20 HS LS HS LS HS LS HS LS Vacuum Switch Setting range Factory setting value Operation accuracy Differential pressure Rated current C xed setting value CK xed setting value -53kPa (-400mmHg) -20 ~ -53kPa (-400mmHg) -53kPa (-400mmHg) -40kPa (-300mmHg) ±5.3kPa (±40mmHg) 4.0 ~ 13.3kPa (30 ~ 100mmHg) AC 125V : 5A AC 250V : 3A Vacuum Equipment KCC Co., Ltd. 125

127 KVSC series Vacuum Safety Valve KVSC - M H VACUUM EQUIPMENT Is used on one vacuum source where many vacuum pads are applied. A devices which can maintain vacuum condition even when workpieces breakaway or fallen from vacuum pad. Applicable to workpieces in non-uniform placement. Can be installed on the piping between vacuum source and pad. Series KVSC : Vacuum safety valve Nozzle diameter Orifice M5 : M5xP : Ø0.3 M6 : M6xP : Ø0.5 G1/8 : G 1/8 M10 : M10xP : Ø0.6 Temperature Working pressure Mounting method Body type H : Hex body C : Circular body HS : Hex body with fine thread (Only available for M10 port size) CS : Circular body with fine thread (Only available for M10 port size) Air -10 ~ ~ 0kPa(-713 ~ 0mmHg) Screw type Type M5-03 M6-05 G1/8-06 M10-06 Pressure drop before adsorption (-kpa) Applicable vacuum pad (mm) Ø15 Ø20~Ø50 Ø20~Ø100 Ø60~Ø100 Circular body type can be internally installed in DSC and DSG series vacuum holder. CF series Vacuum Filter CF - 03 CF-06 Thread 03 : Rc(PT)1/8 05 : Rc(PT)1/4 06 : Rc(PT)3/8 600 : Rc(PT)3/4 800 : Rc(PT)1 Filtration Air 40 CF

128 MVO series Rotary Vane Vacuum Pumps (Oil Circulated Type) MVO B C - VACUUM EQUIPMENT MVO 006 MVO 008/016 MVO 010/020 MVO 030/040 Series MVO : Oil circulated (Built-in exhaust filter) Displacement 006 6m 3 /hr m 3 /hr 008 8m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr m 3 /hr Motor voltage Motor version(1~) Motor version(3~) A 110/220V D 220/380V B 220V E 380V C 110V F 220V L 240V G 440V H 460V J 415V K 200V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar MVO 063/100 MVO 160/250 MVO 400/630 SVO series Rotary Vane Vacuum Pumps (Oil Circulated Type) Displacement Max. pressure Weight Displacement Max. pressure Weight Type Type MVO 006 MVO 008 MVO 016 MVO 010 MVO 020 MVO 030 MVO Hz m 3 /h 60Hz A mbar C 20 50Hz kg Hz MVO 063 MVO 100 MVO 160 MVO 250 MVO 400 MVO Hz m 3 /h 60Hz A 0.5 mbar C 20 50Hz kg Hz SVO B C SVO 060 Series SVO : Oil circulated (no exhaust filter) Displacement 060 : 60 /min 100 : 100 /min Motor voltage Motor version(1~) A 110/220V B 220V C 110V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar Vacuum Equipment Type SVO060 SVO100 50Hz Displacement /min 60Hz Max. pressure mbar 2 50Hz Weight kg Hz KCC Co., Ltd. 127

129 MOT series Rotary Vane Vacuum Pumps (Oil Flooded Type) MOT B C - VACUUM EQUIPMENT MOT 85 Series MOT : Oil flooded type Displacement 085 : 85 /min 140 : 140 /min Motor voltage Motor version(1~) A 110/220V B 220V C 110V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar Type MOT085 MOT140 50Hz Displacement /min 60Hz Max. pressure Gas Ballast Close Torr Weight 50Hz 60Hz kg SML series Rotary Vane Vacuum Pumps (Dry Running Type) SML B C - SML 030/060 Series SML : Dry running Displacement 030 : 30 /min 60 : 60 /min 140 : 140 /min 280 : 280 /min Motor voltage Motor version(1~) Motor version(3~) A 110/220V D 220/380V B 220V E 380V C 110V F 220V L 240V G 440V H 460V J 415V K 200V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar SML 140 Type SML030 SML060 SML140 SML280 50Hz /min Displacement 60Hz /min Max. pressure 50Hz mmhg 550~ Hz Max. pressure bar 1.0 Weight 50Hz 60Hz kg

130 DWV series Liquid Ring Vacuum Pumps VACUUM EQUIPMENT DWV B C - DWV 400 Series DWV : Water sealed Displacement 400 : 400 /min 10H : 1000 /min Motor voltage Motor version(1~) Motor version(3~) A 110/220V D 220/380V B 220V E 380V C 110V F 220V L 240V G 440V H 460V J 415V K 200V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard C : 20mbar DWV 10H Type DWV400 DWV10H 50Hz Displacement /min 60Hz Max. pressure mmhg Hz Weight kg 20 60Hz ENT series Suction Pump for ENT Medical ENT B C - ENT 070 Series ENT : Suction pump Displacement 035 : 35 /min 070 : 70 /min Motor voltage Motor version(1~) A 110/220V B 220V C 110V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar Vacuum Equipment Displacement Max. pressure Weight Type ENT035 ENT070 50Hz /min 60Hz Hz mmhg Hz 50Hz kg Hz KCC Co., Ltd. 129

131 DEN400, SYSDEN400 series Suction Pump for Dental Medical VACUUM EQUIPMENT DEN B C - DEN 400 Series DEN : Sution pump - Single SYSDEN : Sution pump - Dual Displacement 400 : 400 /min Motor voltage Motor version(1~) A 110/220V B 220V C 110V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Arrival pressure Nil : Standard B : 2mbar C : 20mbar SYSDEN 400 Type DEN400 SYSDEN400 50Hz Displacement /min 60Hz Max. pressure mmhg 680 S series Vacuum Tank Systems S F37-1H M A - E C Simplex Series S : Vacuum tank system Displacement A18 SML-030 F30 MVO-008 A19 SML-060 F27 MVO-016 A20 SML-140 F31 MVO-010 A24 SML-280 F32 MVO-020 C20 ENT-035 F34 MVO-030 C21 ENT-070 F35 MVO-040 D25 DEN-040 F36 MVO-063 E26 DWV-400 F37 MVO-100 E28 DWV-10H F39 MVO-160 B15 SVO-060 F40 MVO-250 B16 SVO-100 F41 MVO-400 F29 MVO-006 F42 MVO-630 Series 1H : Simplex 2H : Duplex Tank size 1 : 3 Liter 2 : 30 Liter 3 : 70 Liter 4 : 150 Liter 5 : 200 Liter 6 : 300 Liter Tank type 1~4 : Cylinder courage 2 : Acryl type (The inside is visible) 6~9 : Rectangularity courage Operation Control pannel Vacuum & pressure switch M No No S No Yes E Yes No A Yes Yes Valve application M : Manual ON/OFF(Ball valve) A : Automatic ON/OFF (Sol. vlave) C : Manual drain cock D : Automatic drain cock Motor voltage Motor version(1~) Motor version(3~) A 110/220V D 220/380V B 220V E 380V C 110V F 220V L 240V G 440V H 460V J 415V K 200V Motor hertz (Hz) A : 60 B : 50 C : 50/60 Duplex Simplex Duplex Model m 3 /hr Tank (Liter) Weight (kg) SF34-1H-46AM SF35-1H-46AM SF36-1H-66AM SF37-1H-66AM SF34-2H-56AM SF35-2H-56AM SF36-2H-66AM SF37-2H-66AM

132 One Touch Fitting One Touch Fitting ACCESSORIES EC One action inserts the tube for easy connect and release. The EC type has interior and exterior hexagonal shapes for efficient piping in limited spaces. The main body of the PL and PT types has a rotating structure for efficient piping. The screw section has O-ring or Teflon coating. Series Refer to the following table Working Pressure Negative Pressure Working Temperature Applicable Tube Tube outer diameter 03 : Ø3 04 : Ø4 06 : Ø6 08 : Ø8 10 : Ø10 12 : Ø12 16 : Ø16 Thread R(PT), Rc(PT) M5 : M5 M6 : M6 01 : 1/8 02 : 1/4 03 : 3/8 04 : 1/2 Plating Nil : Standard N : Nickel Custom made of G thread type & NPT thread type is available. Air (No other type of gas or liquid) 0~150PSI / 0~9.9kgf/cm 2 (0~0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting in Hg / -750mmHg(-750Torr) 32~140 F / 0~60 C Polyurethane and Nylon Model EC EL ET EY ELL EST EPFC EFC EH EOC D D R R D D D D Snapshot R D R ØD R R R D D D Rc Rc R D R Ø3 M5 EH03M5(100) M5 EC04M5(100) EL04M5(100) ET04M5(100) EY04M5(100) ELL04M5(50) EST04M5(100) EFC04M5(100) EH04M5(50) EOC04M5(100) M6 EC04M6(100) EL04M6(100) ET04M6(100) EY04M6(100) ELL04M6(50) EST04M6(100) EH04M6(50) EOC04M6(100) Ø4 1/8 EC0401(100) EL0401(100) ET0401(100) EY0401(100) ELL0401(50) EST0401(100) EPFC0401(100) EFC0401(100) EH0401(50) EOC0401(100) 1/4 EC0402(100) EL0402(100) ET0402(100) EY0402(100) ELL0402(50) EST0402(100) EPFC0402(100) EFC0402(100) EH0402(50) EOC0402(100) 3/8 EC0403(100) EL0403(100) ET0403(50) EY0403(50) ELL0403(50) EST0403(50) EPFC0403(100) EFC0403(100) EOC0403(100) M5 EC06M5(100) EL06M5(100) ET06M5(50) EY06M5(50) ELL06M5(50) EST06M5(50) EFC06M5(100) EH06M5(50) EOC06M5(100) M6 EC06M6(100) EL06M6(100) ET06M6(50) EY06M6(50) ELL06M6(50) EST06M6(50) EH06M6(50) EOC06M6(100) 1/8 EC0601(100) EL0601(100) ET0601(50) EY0601(50) ELL0601(50) EST0601(50) EPFC0601(100) EFC0601(100) EH0601(50) EOC0601(100) Ø6 1/4 EC0602(100) EL0602(100) ET0602(50) EY0602(50) ELL0602(50) EST0602(50) EPFC0602(100) EFC0602(100) EH0602(50) EOC0602(100) 3/8 EC0603(100) EL0603(50) ET0603(50) EY0603(50) ELL0603(50) EST0603(50) EPFC0603(50) EFC0603(50) EH0603(25) EOC0603(100) 1/2 EC0604(50) EL0604(50) ET0604(25) EY0604(25) ELL0604(25) EST0604(25) EFC0604(50) EH0604(25) 1/8 EC0801(100) EL0801(50) ET0801(50) EY0801(50) ELL0801(50) EST0801(50) EPFC0801(50) EFC0801(100) EH0801(50) EOC0801(100) Ø8 1/4 EC0802(100) EL0802(50) ET0802(50) EY0802(50) ELL0802(50) EST0802(50) EPFC0802(50) EFC0802(100) EH0802(50) EOC0802(100) 3/8 EC0803(100) EL0803(50) ET0803(50) EY0803(50) ELL0803(25) EST0803(50) EPFC0803(50) EFC0803(50) EH0803(25) EOC0803(100) 1/2 EC0804(50) EL0804(50) ET0804(25) EY0804(25) ELL0804(25) EST0804(25) EPFC0804(50) EFC0804(50) EH0804(20) EOC0804(50) 1/8 EC1001(100) EL1001(50) ET1001(25) EY1001(25) ELL1001(25) EST1001(25) EPFC1001(50) EFC1001(100) EH1001(25) EOC1001(100) Ø10 1/4 EC1002(100) EL1002(50) ET1002(25) EY1002(25) ELL1002(25) EST1002(25) EPFC1002(50) EFC1002(100) EH1002(25) EOC1002(100) 3/8 EC1003(100) EL1003(50) ET1003(25) EY1003(25) ELL1003(25) EST1003(25) EPFC1003(50) EFC1003(50) EH1003(25) EOC1003(100) 1/2 EC1004(50) EL1004(25) ET1004(25) EY1004(25) ELL1004(25) EST1004(25) EPFC1004(25) EFC1004(50) EH1004(20) EOC1004(50) 1/8 EC1201(50) EL1201(25) ET1201(25) EY1201(25) ELL1201(25) EST1201(25) EPFC1201(25) EOC1201(50) Ø12 1/4 EC1202(50) EL1202(25) ET1202(25) EY1202(25) ELL1202(25) EST1202(25) EPFC1202(25) EFC1202(50) EOC1202(50) 3/8 EC1203(50) EL1203(25) ET1203(25) EY1203(25) ELL1203(25) EST1203(25) EPFC1203(25) EFC1203(50) EH1203(25) EOC1203(50) 1/2 EC1204(50) EL1204(25) ET1204(20) EY1204(25) ELL1204(25) EST1204(20) EPFC1204(25) EFC1204(25) EH1204(20) EOC1204(50) Ø16 3/8 EC1603(25) EL1603(20) ET1603(12) 1/2 EC1604(25) EL1604(20) ET1604(12) Model ER ERL EUR EWJ ERY EKG EKJ Model EKD d d D D D D R Snapshot d Snapshot D D ØD Ød D D d D d d d d D D d R Ø6 Ø4 ER0604(100) ERL0604(100) EUR0604(100) EWJ0604(100) ERY0604(100) EKG0604(25) EKJ0604(25) Ø6 Ø4 1/8 EKD (25) 01(25) Ø4 ER0804(100) EUR0804(100) ERY0804(50) EKG0804(25) EKJ0804(25) Ø4 1/8 EKD (25) Ø8 Ø6 ER0806(100) ERL0806(50) EUR0806(100) EWJ0806(50) ERY0806(50) EKG0806(25) EKJ0806(25) Ø4 1/4 EKD (25) Ø8 Ø6 ER1006(50) EUR1006(50) ERY1006(25) EKG1006(25) EKJ1006(25) Ø6 1/8 EKD (25) Ø10 Ø8 ER1008(50) ERL1008(50) EUR1008(50) EWJ1008(50) ERY1008(25) EKG1008(25) EKJ1008(25) Ø6 1/4 EKD (25) Ø6 ER1206(50) Ø6 1/4 EKD (25) Ø12 Ø8 ER1208(50) EUR1208(50) ERY1208(25) Ø6 3/8 EKD (20) Ø10 Ø10 ER1210(50) ERL1210(25) EUR1210(50) EWJ1210(25) ERY1210(25) Ø8 1/4 EKD (25) Ø16 Ø12 EUR1612(25) Ø8 3/8 EKD (20) Model in parenthesis() is quantity of one box. Accessories KCC Co., Ltd. 131

133 One Touch Fitting One Touch Fitting ACCESSORIES Model EUT EUY EUC EUL EPC EBC EYA EAL EZA Snapshot Ø4 EUT04(100) EUY04(100) EUC04(100) EUL04(100) EPC04(100) EBC04(100) EYA04(100) EAL04(100) EZA04(50) Ø6 EUT06(50) EUY06(50) EUC06(100) EUL06(100) EPC06(100) EBC06(100) EYA06(50) EAL06(50) EZA06(50) Ø8 EUT08(50) EUY08(50) EUC08(50) EUL08(50) EPC08(50) EBC08(100) EYA08(50) EAL08(50) EZA08(25) Ø10 EUT10(25) EUY10(25) EUC10(50) EUL10(50) EPC10(50) EBC10(100) EYA10(25) EAL10(50) EZA10(25) Ø12 EUT12(25) EUY12(25) EUC12(25) EUL12(25) EPC12(25) EBC12(100) EYA12(25) EAL12(25) EZA12(20) Ø16 EUT16(15) EUC16(25) EUL16(20) EPC16(25) EBC16(50) EAL16(20) Compact One Touch Fitting Compact One Touch Fitting ECC 04 M5 Series Refer To Bottom Table Tube Outer Dia 03 : Ø3 04 : Ø4 06 : Ø6 Custom made of G thread type & NPT thread type is available. Thread R(PT), Rc(PT) M3 : M3 M4 : M4 M6 : M6 01 : 1/8 One action inserts the tube for easy connect and release. Volume and OD are smaller than the regular type, but same flux is obtained. Treated with electroless nickel coating on the surface for excellent tolerance to corrosion. Oval sleeve is designed to allow easy release in limited spaces. The screw section has O-ring or Teflon coating. Miniaturized fitting for small devices and piping in limited spaces. Working Pressure Negative Pressure Working Temperature Applicable Tube Air 0~150PSI / 0~9.9kgf/cm 2 (0~0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting in Hg / -750mmHg (-750Torr) 32~140 F / 0~60 C Polyurethane, Nylon Model ECC ELC EFCC ELLC ETC EOCC ESTC Snapshot D D D D D R R DØ R R D Rc D R D R R D M3 ECC03M3(100) ELC03M3(100) EFCC03M3(100) ELLC03M3(100) ETC03M3(100) EOCC03M3(100) C03M3(10 ESTC03M3(100) Ø3 M5 ECC03M5(100) ELC03M5(100) EFCC03M5(100) ELLC03M5(100) ETC03M5(100) EOCC03M5(100) ESTC03M5(100) M6 ECC03M6(100) ELC03M6(100) EFCC03M6(100) ELLC03M6(100) ETC03M6(100) EOCC03M6(100) ESTC03M6(100) 1/8 ECC0301(100) M3 ECC04M3(100) ELC04M3(100) EFCC04M3(100) ELLC04M3(100) ETC04M3(100) EOCC04M3(100) ESTC04M3(100) Ø4 M5 ECC04M5(100) ELC04M5(100) EFCC04M5(100) ELLC04M5(100) ETC04M5(100) EOCC04M5(100) ESTC04M5(100) M6 ECC04M6(100) ELC04M6(100) ELLC04M6(100) ETC04M6(100) EOCC04M6(100) ESTC04M6(100) 1/8 ECC0401(100) ELC0401(100) EFCC0401(100) ELLC0401(100) ETC0401(100) EOCC0401(100) ESTC0401(100) M5 ECC06M5(100) ELC06M5(100) EFCC06M5(100) ELLC06M5(100) ETC06M5(100) EOCC06M5(100) ESTC06M5(100) Ø6 M6 ECC06M6(100) ELC06M6(100) EFCC06M6(100) ELLC06M6(100) ETC06M6(100) EOCC06M6(100) ESTC06M6(100) 1/8 ECC0601(100) ELC0601(100) EFCC0601(100) ELLC0601(100) ETC0601(100) EOCC0601(100) ESTC0601(100) Model EURC ERYC ERC Model EUTC EUYC EUCC EULC EPCC D d D Snapshot Snapshot ØD Ød d D d Ø3 Ø4 EURC0304(100) EURC0304(100) ERC0304(100) Ø3 EUTC03(100) EUYC03(100) EUCC03(100) EULC03(100) EPCC03(100) Ø3 Ø6 EURC0306(100) EURC0306(100) ERC0306(100) Ø4 EUTC04(100) EUYC04(100) EUCC04(100) EULC04(100) EPCC04(100) Ø4 Ø6 EURC0406(100) EURC0406(100) ERC0406(100) Ø6 EUTC06(100) EUYC06(100) EUCC06(100) EULC06(100) EPCC06(100) Model in parenthesis() is quantity of one box

134 Metal Two Touch Fitting Metal Two Touch Fitting ACCESSORIES N 4 M5 N4M5 PM5 SC, SCS series Speed Controller LN4M5 F4M5 Suitable for small equipment and narrow space installation. A variety of installation methods are available, such as I-type, L-type, hose direct connection and etc. Nylon tube and polyurethane tube are adaptable. Series N : Straight Type LN : Elbow Type F : Straight Type(Direct Input) P : Plug Air (No other type of gas or liquid) Applicable Tube Nylon Polyurethane Applicable Tube Size Ø4-Ø2.5 Ø6-Ø4 Max. Working Pressure (At 20 ) 15kgf/cm 2 (1.5MPa) 8kgf/cm 2 (0.8MPa) Working Temperature 0~60 Thread M5, R(PT)1/8 Tube outer diameter Nil : None (PM5 Model) 4 : Ø4 Tube 6 : Ø6 Tube SC Thread M5 : M : R(PT) 1/8 Type 01 is inavailable for LN, F, P series. SC METER-IN SC-F series Speed Controller SCS METER-OUT Accurate regulation of an optimal air flow rate for precise motion control. Tube direction and angle are controlled according to piping as the main body can rotate up to 360 after assembly. Needle rotation is increased to times for easy speed and regular speed control. Miniaturized products occupy small space attaching to devices. Series SC : Elbow Type SCS : Straight Type Control Type Nil : Meter-Out(Black)- Standard IN : Meter-In(Green) Operating Pressure Negative Pressure Working Temperature Applicable Tube Thread M5 : M : R(PT)1/8 02 : R(PT)1/4 03 : R(PT)3/8 04 : R(PT)1/2 Tube Outer Dia 03 : 3Ø Tube 04 : 4Ø Tube 06 : 6Ø Tube 08 : 8Ø Tube 10 : 10Ø Tube 12 : 12Ø Tube Refer to tube max. working pressure, as tube is integrated with fitting. Air (No other gases or liquids) 0~9.9kgf/cm 2 (0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting. -750mmHg(10Torr) 0~60 Polyurethane, Nylon SC 2050F-08 Series SC : Speed Controller With One Touch Fitting Type(Piping Type) Air (No other gases or liquids) 0~9.9kgf/cm Operating Pressure 2 (0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting. Negative Pressure -750mmHg(10Torr) Working Temperature 0~60 Applicable Tube Polyurethane, Nylon Accurate regulation of an optimal air flow rate for precise motion control. Needle rotation is increased to times for easy speed and regular speed control. Air flow from both sides of one touch fitting. Piping as shown on the body can control and adjust free flow. Body Size 1000F-04 : M5 Standard, 4Ø Tube 2000F-06 : 1/8 Standard, 6Ø Tube 2050F-08 : 1/4 Standard, 8Ø Tube 3000F-10 : 3/8 Standard, 10Ø Tube 4000F-12 : 1/2 Standard, 12Ø Tube Accessories KCC Co., Ltd. 133

135 ASCM series ACCESSORIES Piping Type Speed Controller ASCM Series ASCM : Piping Type Speed Controller Port size R(PT) 01 R(PT) 1/8 02 R(PT) 1/4 03 R(PT) 3/8 04 R(PT) 1/2 Control Method Nil : Meter-Out 1 : Meter-In Reduce installation cost and time. Free installation in different ways. Able to control uid ow in low ow rate range Control ow rate uniformly Proof pressure Max. Working Pressure Min Working Pressure Ambient Temperature Number of Niddle Rotations 10.5kgf/cm 2 (1.05Mpa) 7kgf/cm 2 (0.7Mpa) 1kgf/cm 2 (1.0Mpa) 0~60 8 Turns KAS series Piping Type Speed Controller (Large Flow) KAS Series KAS : Piping Type Speed Controller Body Size 500 : 3/4 Standard 600 : 1 Standard Thread 06 : Rc(PT) 3/4 10 : Rc(PT) 1 KAS KAS Model Thread Flow Rate ( min) Free Flow Effective Area(mm 2 ) Controlled Flow Flow Rate( min) Effective Area(mm 2 ) KAS Rc(PT) 3/4 10, , KAS Rc(PT) 1 15, , Applicable Cylinder Bore Size Ø140, Ø160, Ø180, Ø200 Ø160, Ø180, Ø200, Ø250 Is able to control and set a constant speed. Speed may be controlled easily at low ow. Retainer prevents accidental loss of needle. Proof Pressure Max. Operating Pressure Min. Operating Pressure Ambient and Temperature Number of Niddle Rotations KAS Weight KAS Air 15.0kgf/cm 2 (1.5MPa) 10.0kgf/cm 2 (1.0Mpa) 0.50kgf/cm 2 (0.05Mpa) -5~60 (No Freezing) 10 Turns 330g 686g 134

136 SAS series Piping Type Speed Controller SAS ACCESSORIES SAS SAS Series SAS : Piping Type Speed Controller Body Size 2000 : 1/4 Standard 4000 : 1/2 Standard Thread Body Size (Rc(PT)1/8) 02 (Rc(PT)1/4) 03 (Rc(PT)3/8) 04 (Rc(PT)1/2) Compact design Is able to control and set a constant speed. Speed may be controlled easily at low ow. Retainer prevents accidental loss of needle. Model Thread Flow Rate ( min) Free Flow Effective Area(mm 2 ) Controlled Flow Flow Rate ( min) Effective Area(mm 2 ) Applicable Cylinder Bore Size SAS / Ø20, Ø25. SAS / Ø32, Ø40 SAS / SAS / SAS / Input Pressure: 5kgf/cm 2, Temperature: 20 Ø40, Ø50, Ø63, Ø80, Ø100 Proof Pressure Operating Pressure Ambient and Temperature Number of Niddle Rotations SAS SAS Weight SAS SAS SAS Air 15.0kgf/cm 2 (1.5MPa) 0~9.7kgf/cm 2 (0~0.97MPa) -5~60 (No freezing) 8 Turns 48g 58g 235g 214g 204g Accessories KCC Co., Ltd. 135

137 SCPV series ACCESSORIES Speed Controller With Pilot Check Valve SCPV SCPV Series SCPV : Speed Controller With Pilot Check Valve Thread R(PT) 01 R(PT) 1/8 02 R(PT) 1/4 03 R(PT) 3/8 04 R(PT) 1/2 Custom made of G thread type & NPT thread type is available. Tube Outer Dia 06 : Ø6 Tube 08 : Ø8 Tube 10 : Ø10 Tube 12 : Ø12 Tube Combined with pilot check valve and speed controller. Enables 360 free direction of tubing mount. Operating Pressure Negative Pressure Working Temperature Applicable Tube Air 1~9.9kgf/cm 2 (0.1~0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting. -750mmHg(750Torr) 0~60 Polyurethane, Nylon KHVC, KHVF, KHVU, KHVM series Hand Valve With One Touch Fitting KH VC KHVC KHVU Series KH : Hand Valve With One Touch Fitting Type VC : OUT-Tube, IN-Thread VF : IN- Tube, OUT-Thread VU : IN/OUT-Tube Type VM : IN/OUT-Thread Type Operating Pressure Negative Pressure Working Temperature Applicable Tube Out Port Size Thread Tube 01 R(PT) 1/8 06 Ø6 02 R(PT) 1/4 08 Ø8 03 R(PT) 3/8 10 Ø10 04 R(PT) 1/2 12 Ø12 In Port Size Thread Tube 01 R(PT) 1/8 06 Ø6 02 R(PT) 1/4 08 Ø8 03 R(PT) 3/8 10 Ø10 04 R(PT) 1/2 12 Ø12 Custom made of G thread type & NPT thread type is available. Air (No other gases or liquids) 0~9.9kgf/cm 2 (0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting. -750mmHg(-750Torr) 0~60 Polyurethane, Nylon By simply turning the handle, the air pressure device switches the compressed air on and off. Maintenance or inspection is possible when the remaining pressure in the device is removed. A three-way valve discharges the remaining pressure out and blocks the incoming air in the off state. There are 4 types available depending on the method applied to air pressure ow. KHVF KHVM 136

138 SH series Hand Slide Valve ACCESSORIES SH 02 Made of brass or aluminium for long service life. Hand slide valve, when the air ow is stopped, discharges residual pressure to air. With OFF, assures safety while repairing or adjusting connected devices. Series SH : Hand Slide Valve Specications Operating Pressure Negative Pressure Working Temperature Applicable Tube Thread M5 : M : R(PT) 1/8 02 : R(PT) 1/4 03 : R(PT) 3/8 04 : R(PT) 1/2 06 : R(PT) 3/4 Air (No other gases or liquids) 0~9.9kgf/cm 2 (0.99MPa) Refer to tube max. working pressure, as tube is integrated with fitting. -750mmHg(-750Torr) 0~60 Polyurethane, Nylon U series Polyurethane Tube U 4-2 B - 30M Tube Length 100M Series U : Polyurethane Tube Outer & Inner Diameter 4-2 Ø4-Ø Ø10-Ø Ø4-Ø Ø12-Ø8 6-4 Ø6-Ø Ø16-Ø Ø8-Ø5 Color B Blue O Orange C Clear R Red D Black S Blue Sky G Green Y Yellow Length (m) Nil : 100m (Standard) 30M : 30m Tube Length 30M Excellent exibility makes it easy to pipe. Excellent in chemical resistance and water proof. Excellent durability Model Outer Dia. mm Inner Dia. mm Min. Bending Radius mm U U U U U U U Proof Pressure kgf/cm 2 (At 20) Max Working Pressure kgf/cm 2 (At 20) Temperature Material Color ~60 Air Polyurethane Blue, Clear, Black, Green, Orange, Red, Blue Sky, Yellow Accessories KCC Co., Ltd. 137

139 N series Nylon Tube ACCESSORIES N 4-2 D Strong in pressure, abrasion and flection resistance. Appropriate to use with air, water, oil, chemicals and etc. There is almost no decline in performance or no change in measurement. Series N : Nylon Tube Outer & Inner Diameter Metric Inch 4-2 Ø4-Ø2 1/4 Ø6.35-Ø Ø4-Ø2.5 3/8 Ø9.5-Ø7 6-4 Ø6-Ø4 1/2 Ø12.7-Ø Ø8-Ø Ø10-Ø Ø12-Ø Ø16-Ø13 Color C : Clear D : Black W : White Model PFA, PTFE series Te on Tube Outer Dia. mm Inner Dia. mm minimum radius of curvature mm Fracture Pressure kgf/cm 2 (At 20) N N N N N N N N1/ N3/ N1/ Model Outer Dia. mm Inner Dia. mm Series PFA : Teflon Tube (PFA) PTFE : Teflon Tube (PTFE) Fracture Minimum Bending Pressure kgf/cm 2 Radius mm (At 20) Max Working Pressure kgf/cm 2 (At 20) Temperature Material Color 15-20~60 Air Nylon PTFE 4-2 Black, Clear, White Outer & Inner Diameter Metric Inch 4-2 Ø4-Ø Ø12-Ø10 1/4 Ø6.35-Ø Ø6-Ø Ø14-Ø12 3/8 Ø9.5-Ø7 8-6 Ø8-Ø Ø16-Ø14 1/2 Ø12.7-Ø Ø10-Ø Ø19-Ø17 3/4 Ø19-Ø16 1 Ø25.4-Ø22 Max Working Pressure kgf/cm 2 (At 20) PTFE (Polytetra uoroethylene) It is a representative product among the kinds of tetra uoroethylene. Its continuous service temperature is 260 C and its general characteristics are similar to PFA. It is widely used in various industrial elds such as electrical industry, electronics industry, chemical industry, medical device industry, and semiconductor industry. PFA (Per uoroalkoxy) When compared with PTFE, it is superior in the standard intensity of surface illumination. Therefore, almost no dust or foreign matters are attached to it. It is applicable to almost all uids due to the excellent chemical resistance. As it is excellent in transparency, you can see the uid inside. As it is excellent against weathering and corrosion, it does not age. Length m PFA4-2 PTFE PFAE6-4 PTFE PFA8-6 PTFE PFA10-8 PTFE PFA12-10 PTFE PFA14-12 PTFE PFA16-14 PTFE PFA19-17 PTFE PFA1/4 PTFE1/ PFA3/8 PTFE3/ PFA1/2 PTFE1/ PFA3/4 PTFE3/ PFA1 PTFE Temp. Material Color -65 ~260 Air, Water, Chemical PFA Tube: PFA PTFE Tube: PTFE PFA Tube: Clear PTFE Tube: Translucence, White 138

140 UC series ACCESSORIES Polyurethane Coil Hose UC Series UC : Polyurethane Coil Hose Outer & Inner Diameter 0604 : Ø6-Ø : Ø8-Ø : Ø10-Ø : Ø12-Ø8 Length 50 : 5m 75 : 7.5m 100 : 10m coil Nil : 1coil (Standard) 2 : 2coil 3 : 3coil Specications Excellent cold resistance, impact resistance, light weight and easy to use. Easy to use at pneumatic tool, lubrication equipment, pneumatic equipment. 2 coil and 3 coil type can be used for various purposes. SAS series Plastic Silencer Model UC0604 UC0805 UC1065 UC1208 coil 1coil 2coil 3coil 1coil 2coil 3coil 1coil 1coil Outer Dia Inner Dia Air Max Working Pressure (at 20) 8kgf/cm 2 (0.8MPa) Temperature -5~60 Material Polyurethane Color Blue Sky (Standard) Model Thread Effective Area (mm 2 ) Noise Reduction (db(a)) Weight (g) Feature SAS01 R(PT) 1/ SAS02 R(PT) 1/ SAS02-1 R(PT) 1/ Small type SAS03 R(PT) 3/ SAS04 R(PT) 1/ SAS06 R(PT) 3/ SAS08 R(PT) Max Working Pressure Material Temperature Air 10.2kgf/cm 2 (1.02MPa) Plastic Resin (PE) 5~60 KAN series Mass Flow (Steel) Silencer Light weight and long service life with the use of corrosion-resistant material. Mounted at air exhaust port reduce noise effectively. Easy to install with small size. Model Thread Effective Area (mm 2 ) Weight (g) KAN R(PT) 3/ KAN R(PT) KAN R(PT) 1 1/ KAN R(PT) 1 1/ KAN R(PT) Max Working Pressure Noise Reduction Temperature Excellent noise reduction effect. Reduce noise up to 20 db(a) Silencer with low ventilation resistance. Air 10.2kgf/cm 2 (1.02MPa) 20dB(A) 5~60 Accessories KCC Co., Ltd. 139

141 SL series Sintered Silencer ACCESSORIES SL 01 - Excellent noise reduction and filtering in dry condition. AIR VENT series Air Vent JASN series Speed Controller with Silencer Series SL : Sintered Silencer Thread M5 : M : R(PT) 1/8 02 : R(PT) 1/4 03 : R(PT) 3/8 04 : R(PT) 1/2 06 : R(PT) 3/4 08 : R(PT) 1 Option Nil : Standard (Hexagon) 1 : Circle 2 : Short Circle Applicable to SL01 Classication SLM5 SL01 SL02 SL03 SL04 SL06 SL08 Noise Reduction db(a) Air Max. Working Pressure 10kgf/cm 2 (1.0MPa) Temperature -10~180 Effective Area (mm 2 ) Filtration 60 Material Bronze Sintered Weight (g) 3 8 Round type:14 Short round type: Classication AIR VENT-M5 AIR VENT-01 AIR VENT-02 AIR VENT-03 AIR VENT-04 AIR VENT-06 AIR VENT-08 Operating Pressure Temperature Filtration Material Air 10kgf/cm 2 (1.0MPa) -10~ Bronze Sintered Weight 2.0g 5.3g 10.5g 16.9g 28.8g 39.1g 80.1g More compact in size than conventional type. Applicable in narrow space such as gear box, receiver tank single acting cylinder and etc. JASN - 01 Noise reduction effect of 20dB(A) at a max. flow. Easy to control cylinder speed. Retainer prevents accidental loss of needle. Series JASN : Speed Controller with Silencer Classi cation JASN-M5 JASN-01 JASN-02 JASN-03 JASN-04 Thread R(PT) M5X0.8 1/8 1/4 3/8 1/2 Effective Area (mm 2 ) Weight (g) Proof Pressure Working Pressure Filtration Temperature Needdle Rotations Note) ( ): Denotes the value of JASN-M5 type. Thread M5 : M : R(PT) 1/8 02 : R(PT) 1/4 03 : R(PT) 3/8 04 : R(PT) 1/2 15kgf/cm 2 (1.5MPa) 0~10kgf/cm 2 (0~1.0MPa) 40-5~60(No Freezing) 10 Turns ( (note) 8 Turns) 140

142 KMC series ACCESSORIES Exhaust Cleaner KMC B Series KMC : Exhaust Clearner Body Size 220 : 1/4 Standard 320 : 3/8 Standard 420 : 1/2 Standard Thread 02 : Rc(PT) 1/4 03 : Rc(PT) 3/8 04 : Rc(PT) 1/2 Option B : Bracket Ensures clean plant air and reduces noise pollution Over 35 db (A) noise reduction Over 99.9% oil mist removal Temperature Element inlet pressure Noise Reduction Oil mist removal Filtration Option Weight Air 5~60 1kgf/cm 2 (0.12MPa) 35dB(A) Over 99.9% Over Drain Coke Bracket 358g AFE series Filter Element Specications Outer Dia Inner Dia Length Outer Dia Inner Dia Length AFE AFE AFE AFE AFE AFE AFE AFE AFE Mainly used to reduce exhaust noise of pneumatic equipment or pneumatic solenoid valves. Filtration Material 5 Phosphor Bronze JF series Rod End Bearing Specications Model Thread Applicable Pneumatic Cyl Bore Size Applicable Hydraulic Cyl Bore Size JF5 M5 0.8 Ø16 - JF6 M JF8 M Ø20 - JF10 M Ø25, Ø30, Ø32 - JF12 M JF14 M Ø40 - JF16 M For Ø40C JF18 M Ø50, Ø63 - JF20 M For Ø40B/50C JF22 M Ø80 - JF24 M For Ø50B/63C JF25 M Ø100 - JF30 M Ø125, Ø140 For Ø63B/80C JF35 M Ø150, Ø160 - Accessories Rod ends are mainly used in the construction of control rod linkages, where tractive and compressive loads have to be transmitted through arrangements of adjustable control rods in various industrial fields. It has a superior performance especially in rotational and oscillating motions. KCC Co., Ltd. 141

143 SSJ/SFJ series Floating Joint for Pneumatic Cylinder S S J ACCESSORIES Series S : Standard F : Flange SSJ JAH/JAHF series Floating Joint for Hydraulic Cylinder SFJ The floating joint can absorb any off-centering or loss of parallel accuracy between the cylinder and the driven body. Centering is unnecessary. The installation time is dramatically reduced. It is compact and is suitable for high tensile stresses. Rotating angle ±5 Classication Classi cation Applicable Cyl Bore Thread Classi cation Applicable Cyl Bore Thread Ø10 M Ø50, Ø63 M Ø15 M Ø80 M Ø15 M Ø100 M Ø20 M Ø125, Ø140 M Ø25, Ø32 M Ø150, Ø160 M Ø40 M Only Ø10 and Ø15 types are standard types. Operating Pressure Pneumatic Cylinder Hydraulic Cylinder Mounting Type 10kgf/cm 2 (1.0MPa) 35kgf/cm 2 (3.5MPa) Standard, Flange JAH JAH JAHF The floating joint can absorb any off-centering or loss of parallel accuracy between the cylinder and the driven body. Centering is unnecessary. The installation time is dramatically reduced. It is compact and is suitable for high tensile stresses. Rotating angle ±5 Series Nil : Standard F : Flange Operating Pressure Hydraulic Cylinder Mounting Type Classi cation Classication Applicable Cylinder Bore Thread Ø40 M Ø50 M Ø63 M Ø80 M Ø100 M kgf/cm 2 (7MPa) Standard, Flange DISTRIBUTOR series Distributor DISTRIBUTOR 1F - 6S - 1/4-1/8 DISTRIBUTOR-1F-3S-3/8-1/4 DISTRIBUTOR-2F-2S-3/4-1/2 R Various pipe sizes are available. Series DISTRIBUTOR : Standard Number of Side 1F : 1 Side 2F : 2 Side 3F : 3 Side Stations 1S : 1 Station 2S : 2 Station 3S : 3 Station 4S : 4 Station 5S : 5 Station 6S : 6 Station 7S : 7 Station 8S : 8 Station 9S : 9 Station 10S : 10 Station Input Port Size 1/4 : Rc(PT) 1/4 3/8 : Rc(PT) 3/8 1/2 : Rc(PT) 1/2 3/4 : Rc(PT) 3/4 Output Port Size 1/8 : Rc(PT) 1/8 1/4 : Rc(PT) 1/4 3/8 : Rc(PT) 3/8 1/2 : Rc(PT) 1/

144 AUTO SWITCH series Reed Auto Switch OTHERS Model Snap Shot Applicable load Voltage(Load Range) D-A54K Relay, PLC DC24V(5~50mA) AC110V(5~25mA) AC220V(5~12.5mA) Contact Protection Circuit Built In Internal Voltage Drop D-A56K IC Circuit DC4~8V(20mA) None 0.8V D-A64K D-C72K D-C73K Relay, PLC, IC Circuit Relay, PLC DC24V(50mA) AC110V(25mA) AC220V(12.5mA) DC24V(5~50mA) AC110V(5~25mA) AC220V(5~12.5mA) DC24V(5~50mA) AC110V(5~25mA) 2.4V Indicator Lamp Red LED illuminates when turned ON. Built In 100 None 2.4V D-C76K IC Circuit DC4~8V(20mA) 0.8V D-C80K D-A72K D-A73K Relay, PLC, IC Circuit Relay, PLC DC24V(50mA) AC110V(20mA) DC24V(5~50mA) AC110V(5~25mA) AC220V(5~12.5mA) DC24V(5~50mA) AC110V(5~25mA) 0V 2.4V Relay, PLC, IC DC24V(50mA) D-A80K Circuit AC110V(25mA) 0V DC24V(50mA) D-A90(V)K AC110V(20mA) Relay, PLC DC24V(5~40mA) D-A93(V)K 2.7V AC110V(5~20mA) None V Type D-A96(V)K IC Circuit DC4~8V(20mA) 0.8V D-Z72K D-Z82K D-Z73K Relay, PLC DC24V(5~50mA) AC110V(5~25mA) AC220V(5~12.5mA) DC24V(5~50mA) AC110V(5~25mA) 2.4V D-Z76K IC Circuit DC4~8V(20mA) 0.8V D-Z80K MA-1 MA-2H Relay, PLC, IC Circuit Relay, PLC DC24V(50mA) AC110V(20mA) DC24V(5~50mA) AC110V(5~25mA) DC24V(5~50mA) AC110V~AC220V (5~25mA) 0V 2.4V MD-3 IC Circuit DC4~8V(20mA) 0.8V MR R0 R5 S0 S5 R0 Relay, PLC, IC Circuit Relay, PLC Relay, PLC, IC Circuit Relay, PLC Relay, PLC, IC Circuit 2-wire wiring. Lead wire length 1m(Standard), 3m & 5m(Semi standard). S0 DC24V(20mA) AC110V(20mA) DC24V(5~50mA) AC110V(5~25mA) AC220V(5~12.5mA) DC24V(50mA) AC110V(20mA) AC220V(20mA) DC24V(5~50mA) AC110V(5~50mA) DC24V(50mA) AC110V(20mA) AC220V(20mA) Built In 0V 2.4V Red LED illuminates when turned ON. None Red LED illuminates when turned ON. None Red LED illuminates when turned ON. None Red LED illuminates when turned ON. None Red LED illuminates when turned ON. None 0V None Built In 2.4V Red LED illuminates when turned ON. None 0V None Applicable Cylinder ACM Ø40~Ø100 ACL Ø125~Ø160 KP70/140HL Ø40~Ø80 ACP Ø6~Ø16 ACS2/3 Ø20~Ø40 ADF Ø20~Ø125 ADF Ø20~Ø125 ACM Ø40~Ø100 ACL Ø125~Ø160 KP70/140HL Ø40~Ø80 KP125A/160A Ø20~Ø80 Note V is vertical type. (ex. D-A93VK) D-Z82K (low sensitivity) Others KCC Co., Ltd. 143

145 AUTO SWITCH series OTHERS Solid State Auto Switch Model Snap Shot Wiring Type Output Type Applicable load Power Supply Voltage Current Consumption Load Voltage Load Current D-F59K NPN Relay, PLC, IC DC5, 12, 24V 8mA DC28V 150mA 3Wire D-F5PK PNP Circuit (DC4.5~28V) 10mA - 100mA D-J59K 2Wire - DC24V Relay, PLC - - DC24V (DC10~28V) 5~150mA D-H7A1K NPN Relay, PLC, IC DC5, 12, 24V 8mA DC28V 150mA 3Wire D-H7A2K PNP Circuit (DC4.5~28V) 10mA - 100mA D-H7BK 2Wire - DC24V Relay, PLC - - DC24V (DC10~28V) 5~150mA D-F7NVK NPN Relay, PLC, IC DC5, 12, 24V 8mA DC28V 150mA 3Wire D-F7PVK PNP Circuit (DC4.5~28V) 10mA - 100mA D-F7BVK 2Wire - DC24V Relay, PLC - - DC24V (DC10~28V) 5~150mA Internal Voltage Drop D-F9N(V)K NPN DC5, 12, 24V 8mA DC28V 0.4V 3Wire 80mA D-F9P(V)K PNP (DC4.5~28V) DC24V Relay, PLC 10mA - 1.5V DC24V D-F9B(V)K V Type 2Wire ~30mA 4.5V (DC10~28V) D-Y59AK NPN Relay, PLC, IC DC5, 12, 24V 12mA DC28V 150mA 3Wire D-Y7PK PNP Circuit (DC4.5~28V) 15mA - 100mA D-Y59BK 2Wire - DC24V Relay, PLC - - Red LED is attached as indicator lamp. Lead wire length 1m(Standard), 3m & 5m(Semi standard). DC24V (DC10~28V) 5~150mA 0.8V 3V 0.8V 3V 0.8V 3V 0.8V 3V Applicable Cylinder ACM Ø40~Ø100 ACL Ø125~Ø160 KP70/140HL Ø40~Ø80 ACP Ø6,Ø~Ø16 ACS2/3 Ø20~Ø40 ADF Ø20~Ø125 ADF Ø20~Ø125 ACM Ø40~Ø100 ACL Ø125~Ø160 KP70/140HL Ø40~Ø80 KP125A/160A Ø20~Ø80 TIEROD MOUNT FOR CYLINDER Snap Shot D-A54 MOUNT D-A93 MOUNT FREE BAND & EXCLUSIVE BAND FOR CYLINDER Applicable Cyl. Series ACM ACL KP70HL/140HL Cylinder of other company (S, T) Bore Size (mm) Model Applicable Auto Switch Model Ø40 Ø50 D-A54 MOUNT 40/50/63 D-A93 MOUNT 40/50/63 Ø63 Ø80 D-A54 MOUNT 80/100 Reed Type Ø100 D-A54K D-A93 MOUNT 80/100 Ø125 D-A54 MOUNT 125/140 Solid State Type D-A93 MOUNT 125/140 Ø140 D-F59K, Ø150 D-A54 MOUNT 150/160 D-F5PK, D-A93 MOUNT 150/160 Ø160 D-J59K, Ø40 D-J51K D-A54 MOUNT 80/100 Ø50 D-A93 MOUNT 80/100 Ø63 D-A54 MOUNT 125/140 D-A93 MOUNT 125/140 Ø80 D-A54 MOUNT 150/160 D-A93 MOUNT 150/160 Ø63 D-A54 MOUNT 63 D-A93 MOUNT 63 D-A54 MOUNT 63 & D-A93 MOUNT 63 are adapted to medium size cylinders of other companies. (S, T) Applicable Auto Switch Reed Type D-A93(V)K Solid State Type D-F9N(V)K, D-F9P(V)K, D-F9B(V)K Snap Shot Exclusive band for D-72/73 Free band for MA-1, D-72 Applicable Cyl. Series ACP ACS2 ACS3 Bore Size (mm) Model 10 D-C72/73 BAND-ACP B10 16 D-C72/73 BAND-ACP B16 20 D-C72/73 BAND-ACS2 B20 25 D-C72/73 BAND-ACS2 B25 32 D-C72/73 BAND-ACS2 B32 40 D-C72/73 BAND-ACS2 B40 20 D-C72/73 BAND-ACS3 B20 25 D-C72/73 BAND-ACS3 B25 32 D-C72/73 BAND-ACS3 B32 40 D-C72/73 BAND-ACS3 B40 Applicable Auto Switch D-C72/73 FREE BAND For Ø10~Ø40 Model Reed type D-C72K D-C73K Solid state type D-H7A1K, D-H7A2K, D-H7BK Applicable Auto Switch MA-1 FREE BAND Ø10~Ø40 Use Applicable Auto Switch Reed Type MA-1K MA-2HK 144

146 FS series Flow Switch OTHERS FS - 20 A Series FS : Flow Switch Thread 15 : Rc(PT) 1/2 20 : Rc(PT) 3/4 25 : Rc(PT) 1 Thread Material A : PVC (Standard) B : Brass (Order Made) SFS-25A Operating Pressure 10kgf/cm 2 Withstand Pressure 17.5kgf/cm 2 Insulating Resistance 100, DC500VM Withstand Voltage AC1500V/MIN Contact Point Life 1000K Cycle Bellows Life 500K Cycle Temperature of Max. 100 FS series provide excellent performance in accuracy and reliability and when rugged construction is required. FS series are used for liquid flow lines, carrying fluids harmful to brass, bronze and phosphor or any hazardous classified fluid. Due to the wiring, one circuit can be closed and the other circuit can be opened, when the speed of a fluid is faster or slower than required. FS series are suitable for liquid pressure and temperature in accordance with specifications. They should not be used for fluids lower than 0 C. When protected from water or weathering it can be used outdoors. It is designed to be used by the operating control device only. A failure of the operating control may cause injuries or a loss of property. For that, the user should use a safety device for protection or a warning monitoring system for control failure. HS series Pressure Switch HS HS-210 HS-306 Series HS : Pressure Switch Applicable to air, water and fluoride refrigerant. Various access functions. Mounting bracket is provided. Micro-switch ensures reliable conversion. Pressure Range cmHg~3kgf/cm cmHg~6kgf/cm ~10kgf/cm ~20kgf/cm ~30kgf/cm M LOW: -50cmHg~ 6kgf/cm 2 HIGH: 8~ 30kgf/cm 2 2-Contact, Common connection M:Manual Reset Contact 606M M:Manual Reset Range(kgf/cm 2 ) Differential(kgf/cm 2 ) Factory Setting Max. Bellows Model Pressure Min. Max. Min. Max. ON OFF (kgf/cm 2 ) HS cmHg Temperature Weight (kg) HS cmHg HS HS-306 HS-306M HS-606 HS-606M HS HS LOW SIDE -50cmHg HIGH SIDE 8 30 Applox. 4 Fixed LOW SIDE -50cmHg HIGH SIDE 8 30 Manual Reset Manual Reset LOW SIDE -50cmHg HIGH SIDE 8 30 Applox. 4 Fixed LOW SIDE -50cmHg HIGH SIDE 8 30 Manual Reset Manual Reset Non-corrosive Water, Air, Liquid, Inertness Gas, Steam -10~ Others KCC Co., Ltd. 145

147 KTD-600 series Digital Pressure Sensor Switch OTHERS Multi indicate for positive and negative pressure. Compact design and light weight. One touch zero adjustment function (kpa,bar,psi). Return function in automatic operating mode. Independent 2-channel output according to user settings. Use high precision semiconductor pressure sensor. Widely used, when precise pressure control is required, such as semiconductor manufacturing line, medical equipment, automation line and etc. Model KTD-600 KTD-600V (Vacuum Type) Pressure Type Compound pressure Negative pressure Display Pressure Range ~ 9kgf/cm ~ 0kgf/cm 2 Rated Pressure Range ~ 9kgf/cm ~ 0kgf/cm 2 Max Pressure Range 2 Times of rating pressure 1.5 Times of rating pressure Air, Non-corrosive gas Power Supply 12~24VDC ± 10% Ripple (P-P) Current Consumption Max. 30mA Ambient Temperature 0~50 (No dew) Storage Temperature Ambient Humidity Temperature Coef cient of Span Linearity Reponse Time Control Output Analog Output -0.1~-0.2% Span/ (-20~100) -40~125 (No freezing) 30~80%RH (No freezing) ±0.3% Span -0.2~-0.3% Span/ (-20~100) Selectable from 1 to 99 Step (1Step = 5msec) NPN Open Collector 2 Output (Max. load current 100mA) Select Analog Mode (0~6 Step Mode) Select Analog Mode (0~4 Step Mode) Resolution : 1~5V (1/800) 0~5V (1/1000) Display Method - 1LED (±display), 3 Digit FND 7 Segment - (OUT1, OUT2) displayed by 2 LED Material - Front case, Pannel bracket : PC - Pressure port : M5 (Built in) Wire Ø4.2 / 24AWG X 5Core / Approx. 1.5m (±5%) Accessory Manual, Mounting bracket, Bracket set for pannel Display Pressure Unit kpa, bar, psi kpa, mbar, psi Weight 156g KTD-1000 series Digital Pressure Sensor Switch Multi indicate for positive and negative pressure. Compact design and light weight. With one touch zero adjustment function (kpa,bar,psi). Return function in automatic operating mode. Independent 2-channel output according to user settings. Analog output(1~5v) KTD Model A103-L 102P, 102V, 203, 503, 104 Pressure Type Guige Pressure (Ductile Pressure) 102P : 0 ~ 1kgf/cm 2 Rated Pressure Range ~ 9kgf/cm 2 Max Pressure Range Power Supply Current Consumption Linearity Reponse Time Operating Temperature Temperature compensation Output Characteristic Depending on Temperature Control Output Analog Output 2 times of rating pressure 102V : 0 ~ -1kgf/cm : 0 ~ 20kgf/cm : 0 ~ 50kgf/cm : 0 ~ 100kgf/cm 2 SUS316L, Liquid and gases compatible with Titanium 12 ~ 24VDC ± 10% Ripple (P-P) Max. 40mA (No load) ±0.2% FS Selectable from 5 to 495msec (1 ~ 99Step / 1Step = 5msec) -40 ~ ~ 50 ±0.75% FS (-20~85) NPN open collector 4 Output 1 ~ 5V (Resolution : Linear) Display Method - High intensity 4 digit 7 segment display (Red) - Unit displayed by 3LED (Green) Wire Ø4.8 / 6C / Approx. 2m Body Material - From case : PC - Rear case : PC Port Size R(PT) 1/4 & M5 Port Material SUS316L Reference - Communication cables and analog cables are sold seperately Weight 300g 146

148 KDPC series OTHERS Digital Pressure Sensor Switch KDPC - L 050 A C - 220V KDPC-L Type L : SINGLE HL : DUAL DIF : DIFFERENCE Pressure Range 06 : 600mmAg 010 : 10kgf//cm : 30kgf//cm : 50kgf//cm 2 (Standard) 100 : 100kgf//cm : 200kgf//cm 2 Output Type Nil : None A : 4~20mA Interface Nil : None L : RS-485 Voltage 12V : 12VDC 24V : 24VDC 220V : 220VAC Type L (SINGLE) HL (DUAL) DIF (DIFFERENCE) Display Accuracy 3 DIGIT FND ±1% F.S Proof Pressure 100kgf/cm 2 Temperature Humidity -20~60 0~80% R. H Air, Non-Corrosive Gas, Water, Oil KDPC-HL Can be used with both new type or old type refrigerant. Available for high pressure and low pressure for pneumatic and hydraulic use. Can be applied to oil pump, water pump, air pump, thermo-hygrostat, condenser, heater pump, air dryer and etc. Inverter control and remote-access is possible with RS-485, 4~20mA output. Accurate pressure setting and digital display. SRJ series Rotary Joint (for Air, Water) Sensor Material Port Size Ceramic Diaphragm 7/16-20UNF Pressure Range 2-1.0~5, 10, 20, 30, 50, -1.0~50kgf/cm 100kgf/cm 2 Control Output 3 Point Relay Output (CONTACT:250V/3A SPDT) Power Supply AC230V±10% 50/60Hz 0.2A Accessory Interface Case Material Bracket RS-485 (Option) ABS Weight 490g 510g SRJ 2000 A - 02 R D SRJ2000A-02R02R Easy to install with compact design and light weight. Low rotating resistance Non-lubricated type Series SRJ : Air, Water for Rotary Joint Body Size 2000 : 1/4 Standard 3000 : 3/8 Standard 4000 : 1/2 Standard 5000 : 3/4 Standard 6000 : 1 Standard 7000 : 1 1/4 Standard 8000 : 1 1/2 Standard 9000 : 2 Standard A : Air W : Water Thread 01 : Rc(PT) 1/8 02 : Rc(PT) 1/4 03 : Rc(PT) 3/8 04 : Rc(PT) 1/2 06 : Rc(PT) 3/4 10 : Rc(PT) 1 12 : Rc(PT) 1 1/4 14 : Rc(PT) 1 1/2 20 : Rc(PT) 2 Max. Pressure 9.9kgf/cm 2 Max. Temperature Max. Number of Rotations rpm Thread Direction R : Right Thread (Standard) L : Left Thread Type Nil : Single Type D : Double Type Others Material Air, Water Aluminium KCC Co., Ltd. 147

149 DR1000 series Bellow- tted Flat Seal Rotary Joint DR A OTHERS DR1001, DR1002 DR1011, DR1012 Series DR10 : Bellows-Fitted Flat Seal Type of Head Compartment 0 : Duplex with Fixed Internal Pipe 1 : Simplex L 2 : Duplex with Rotating Internal Pipe Socket or Beveled for Welding 1 : Right-Hand Screw 2 : Left-Hand Screw 5 : Flange Shaft Size 10A : R(PT) 3/8 15A : R(PT) 1/2 20A : R(PT) 3/4 25A : R(PT) 1 32A : R(PT) 1 1/4 40A : R(PT) 1 1/2 50A : R(PT) 2 65A : R(PT) 2 1/2 80A : R(PT) 3 With a specially developed air-tight, carbon sealing mechanism, sophisticated bellows and rugged ball bearings the DR-1000 series rotary joint ensure not only outstanding sealing ability but are also versatile. they operate at peak performance at high speed, temperature and pressure and do not leak even when high and low temperature operation. Max. Pressure Max. Temperature Max. Number of Rotations 15A~40A 50A~80A 15kgf/cm 2 G rpm 150rpm Steam, Water, Hot Water, Oil, Air, Thermal Media DR2000 series Aluminium, Brass, SUS type Rotary Joint DR A DR2201, DR2202, DR2221, DR2222 DR2011, DR2012 Series DR20 : Aluminum Body DR22 : Brass Body DR25 : SUS Body Type of Head Compartment 0 : Duplex with Fixed Internal Pipe 1 : Simplex L 2 : Duplex with Rotating Internal Pipe Socket or Beveled for Welding 1 : Right-Hand Screw 2 : Left-Hand Screw 5 : Flange 6 : Metric, Right-Hand Screw 7 : Metric, Left-Hand Screw Shaft Size Shaft R(PT) Shaft Metric 6A 1/8 M10 M10xP1.25 8A 1/4 M14 M14xP1.5 10A 3/8 M16 M16xP1.5 15A 1/2 M18 M18xP1.5 20A 3/4 M22 M22xP1.5 25A 1 M26 M26xP1.5 32A 1 1/4 M30 M30xP1.5 40A 1 1/2 M42 M42xP2.0 50A 2 M48 M48xP2.0 65A 2 1/2 In case of Metric, it applies to DR2206, DR2207, DR2216, and DR2217. The DR2000 Series rotary joints have low rotation resistance at high speed operation and are economical to operate. their unique sealed ball bearing mechanism eliminates the need for lubrication and they have a high resistance to corrosion in the area that comes in contact with fluid due to the use of a teflon coated, aluminum alloy, specially formulated resins, a copper alloy and stainless steel, their special design allows for easy maintenance and the joints are lighter and more compact. Max. Pressure 10kgf/cm 2 (7kgf/cm 2 ) Max. Temperature Max. Number of Rotations 6A~25A 32A~65A 100 (80) 1500rpm 1000rpm Water, Air, Chemical, Oil 148

150 DR3000 series Lubrication Free Double Seal for High Temperature s Rotary Joint DR A OTHERS DR3001, DR3002 DR3101, DR3102 DR3011, DR3012 DR3111, DR3112 Series DR30 : Lubricaton Free, Double Seal DR31 : Lubrication Free, Double Seal, High Temperature Type of Head Compartment 0 : Duplex with Fixed Internal Pipe 1 : Simplex L Socket or Beveled for Welding 1 : Right-Hand Screw 2 : Left-Hand Screw 5 : Flange Shaft Size 15A : R(PT) 1/2 20A : R(PT) 3/4 25A : R(PT) 1 32A : R(PT) 1 1/4 40A : R(PT) 1 1/2 50A : R(PT) 2 65A : R(PT) 2 1/2 80A : R(PT) 3 100A : R(PT) 4 The DR3000 series rotary joint are lubricationfree, easy maintenance type with a spherical double seal structure which has a stable capacity to handle and easy-to-leak fluid under highpressure and high temperature conditions. Model DR30 DR31 Max. Pressure 15kgf//cm 2 G 7kgf//cm 2 G Max. Temperature Max. Number 15A~40A of Rotations 50A~100A 300rpm 100rpm Steam, Water, Warm Water, Hot Water, Heat Media DR3700 series Lubrication Free Ductile Cast Iron Body Rotary Joint DR A DR3701, DR3702 DR3705 Series DR37 : Lubrication Free Ductile Cast Iron Body Type of Head Compartment 0 : Duplex with Fixed Internal Pipe 1 : Simplex L 2 : Duplex with Rotating Internal Pipe Socket or Beveled for Welding 1 : Right-Hand Screw 2 : Left-Hand Screw 5 : Flange Shaft Size 15A : R(PT) 1/2 20A : R(PT) 3/4 25A : R(PT) 1 32A : R(PT) 1 1/4 40A : R(PT) 1 1/2 50A : R(PT) 2 65A : R(PT) 2 1/2 80A : R(PT) 3 The DR3700 series are high performance, nolubrication type rotary joints that guarantee efficient operation in high temperature and high pressure conditions. given the widest possible supporting area and distance between the fulcra, the two bearings enhance the stabilized sealing effect facilitate maintenance. Max. Pressure Max. Temperature Max. Number of Rotations 10A~25A 50A~80A 15kgf//cm 2 G rpm 150rpm Steam, Hot Water, Thermal Media, Water, Coolant, Oil, Air Others KCC Co., Ltd. 149

151 DR5000 series Hydraulic Rotary Joint DR A Series DR50 : Hydraulic DR A Type of Head Compartment 21 : Duplex with Rotating Internal Pipe, Right Hand Thread Shaft Size 25A : R(PT) 1 32A : R(PT) 1 1/4 40A : R(PT) 1 1/2 OTHERS With precisely polished seal sides and tolerance, it guarantees perfect sealing even at high pressure. DR6000 series Rotary Joint (for Cutting Oil) Max. Pressure Max. Temperature Max. Number of Rotations 140kgf/cm 2 G rpm Hydraulic oil KPF series Air Feeder DR 6012-M16 Model Type of Head Compartment Socket or Beveled for Welding Thread Max. Pressure Max. Temperature Max. Number of Rotations Series KPF : Air Feeder Max. Material Lenth(mm) Standard : 40~300 (Refer to Specifications) DR6012-M16 Simplex L Left-hand thread M16 P1.5 70kgf/cm 2 G rpm Water, Cutting oil, Oil Its bearing structure enables to maintain a good balance under high pressure applied in axial direction and guarantees silent operation even during high-speed rotation. By adopting a special-material mechanical seal, it is used as a rotary joint for the supply of gun drill cutting oil and glass boring, which requires high speed. Perfect four-stroke support by mechanical and electric type products. Better precision and less noise with pneumatic absorber. Provides efficient transport and feed through four-stroke air intake and emission using spool valve. Perfectly supports feeding and release with two solenoid valves. Simple one-unit structure. KPF S ER Max. Feed Length(mm) Standard : 50~300 (Refer to Specifications) Operating Type S : Single Type D : Double Type Operating Type M : Mechanical Type MR : Mechanical Release Type E : Electronic Type ER : Electronic Release Type Material and weight reduction with downstream piston. Push and pull of material possible with one machine. Feed precision ±0.025mm Improved SPM with compress pilot valve Model 0405S 0415S 0607S 0620S 1010S 1030S 1515S 1530S 2020D 2515D 2525D 3016D 3030D Max. Material Length mm Max. Feed Length mm Max. Material Thicknees mm Max. Air Pressure kgf// cm Stroke Per Minute S.P.M Fixed Clamp Pressure kg Mobile Clamp Pressure kg Tensile Strength kg Air Consumption L/min Weigth kg Above models are fundamental models. Other models are produced upon order. Start air feeder after installing the air unit. (F.R.L) 150

152 KSM series OTHERS Air Transporter KSM - 12 Series KSM : Air Trasporter Mechanical Capacity 12 : 12kg 48 : 48kg 100 : 100kg Less mechanical noise. Simple and convenient installation. Provides efficient transport and feed through air intake and emission using spool valve. Maximum 8 upward transport depending on weight and frictional coefficient, using inertia. Applicable in various working environments (press, injection, product screening, product transport). Convenient re-installation with tray structure. Effective for narrow (minimum 15 mm), deep and wide areas with tray structure. Capable of installing several trays with one machine. Convenient post-management with simple components. KABL series Air Ball Lifter Model KSM12 KSM48 KSM100 Operating Pressure kgf//cm 2 4.5~5.5 Mechanical Capacity kg Air Pressure Comsumption L/min Noise db-a Max. Stroke Length mm Max. Tray Weight kg Recommended Strokes Per Minute SPM Weight kg KABL 50D - 5B Series KABL : Air Ball Lifter Pneumatic type - no hydraulic pump needed Easy installation and use Less cost compared with hydraulic lifter Convenient maintenance Aluminum body - light weight Superior directionality using balls Block joint type - changeable assemblage Forced ascent and descent possible Adaptation of ball cover improve ball service life Number of Balls 1B : 1pcs 2B : 2pcs ~ 20B : 20pcs Model Num. of Balls Ascending Force kn (kgf) Descending Force kn (kgf) Pressure of Compressed Air MPa (kgf/cm 2 ) Pressure of Compressed Air MPa (kgf/cm 2 ) 0.4 (4.08) 0.5 (5.10) 0.6 (6.12) 0.7 (7.14) 0.4 (4.08) 0.5 (5.10) 0.6 (6.12) 0.7 (7.14) KABL50D-1B (112) 1.37 (140) 1.64 (168) 1.92 (196) 0.10 (10.3) 0.13 (12.8) 0.15 (15.4) 0.18 (17.9) KABL50D-2B (224) 2.74 (279) 3.29 (335) 3.84 (391) 0.20 (20.5) 0.25 (25.6) 0.30 (30.8) 0.35 (35.9) KABL50D-3B (335) 4.11 (419) 4.93 (503) 5.76 (587) 0.30 (30.8) 0.38 (38.5) 0.45 (46.1) 0.53 (53.8) KABL50D-4B (447) 5.48 (559) 6.58 (671) 7.67 (783) 0.40 (41.0) 0.50 (51.3) 0.60 (61.5) 0.70 (71.8) KABL50D-5B (559) 6.85 (699) 8.22 (838) 9.59 (978) 0.50 (51.3) 0.63 (64.1) 0.75 (76.9) 0.88 (89.7) KABL50D-6B (671) 8.22 (838) 9.87 (1006) 11.5 (1174) 0.60 (61.5) 0.75 (76.9) 0.91 (92.3) 1.06 (108) KABL50D-7B (783) 9.59 (978) 11.5 (1174) 13.4 (1369) 0.70 (71.8) 0.88 (89.7) 1.06 (108) 1.23 (126) KABL50D-8B (894) 11.0 (1118) 13.2 (1342) 15.3 (1565) 0.80 (82.0) 1.01 (103) 1.21 (123) 1.41 (144) KABL50D-9B (1006) 12.3 (1258) 14.8 (1509) 17.3 (1761) 0.91 (92.3) 1.13 (115) 1.36 (138) 1.58 (162) KABL50D-10B (1118) 13.7 (1397) 16.4 (1677) 19.2 (1956) 1.01 (103) 1.26 (128) 1.51 (154) 1.76 (179) KABL50D-11B (1230) 15.1 (1537) 18.1 (1845) 21.1 (2152) 1.11 (113) 1.38 (141) 1.66 (169) 1.94 (197) KABL50D-12B (1342) 16.4 (1677) 19.7 (2012) 23.0 (2348) 1.21 (123) 1.51 (154) 1.81 (185) 2.11 (215) KABL50D-13B (1453) 17.8 (1817) 21.4 (2180) 24.9 (2543) 1.31 (133) 1.63 (167) 1.96 (200) 2.29 (233) KABL50D-14B (1565) 19.2 (1956) 23.0 (2348) 26.9 (2739) 1.41 (144) 1.76 (179) 2.11 (215) 2.46 (251) KABL50D-15B (1677) 20.6 (2096) 24.7 (2515) 28.8 (2935) 1.51 (154) 1.89 (192) 2.26 (231) 2.64 (269) KABL50D-16B (1789) 21.9 (2236) 26.3 (2683) 30.7 (3130) 1.61 (164) 2.01 (205) 2.41 (246) 2.82 (287) KABL50D-17B (1900) 23.3 (2376) 28.0 (2851) 32.6 (3326) 1.71 (174) 2.14 (218) 2.56 (261) 2.99 (305) KABL50D-18B (2012) 24.7(2515) 29.6 (3018) 34.5 (3521) 1.81 (185) 2.26 (231) 2.72 (277) 3.17 (323) KABL50D-19B (2124) 26.0 (2655) 31.2 (3186) 36.5 (3717) 1.91 (195) 2.39 (244) 2.87 (292) 3.34 (341) KABL50D-20B (2236) 27.4 (2795) 32.9 (3354) 38.4 (3913) 2.01 (205) 2.51 (256) 3.02 (306) 3.52 (359) Others KCC Co., Ltd. 151

153 SB series OTHERS Air Vibrator SB - 2 B Body Size 2 : 1/4 Small Type 3 : 1/4 Medium Type Vibration Method B : Ball Type R : Rotor Type SB 3-B Model SB-2B SB-3B SB-2R SB-3R SB 3-R Uniform vibration and easy to install. Minimizing noise. No risk of gas explosion by using air. Easy vibration control. Vibration Frequency (Hz) Num. of Rotation (rpm) Vibration Acceleration (m/s 2 ) 3kgf//cm kgf//cm kgf//cm kgf//cm kgf//cm kgf//cm kgf//cm kgf//cm kgf//cm Operating Pressure 2~9.9kgf//cm 2 Air KPV series Air Vibrator Specications Model KPV-10 KPV-16 KPV-22 KPV-30 KPV-40 KPV-50 Tube Diameter Ø10 Ø16 Ø22 Ø30 Ø40 Ø50 Forward Thrust(kgf) 4kg//cm kg//cm Strong vibration. Transfer of local vibration. Little noise. Backward Thrust(kgf) Frequency (reciprocations /minute) Air Consumption (liters/minute) 4kg//cm kg//cm kg//cm 2 4,000 3,800 3,300 2,600 1,800 1,600 7kg//cm 2 5,800 4,800 4,200 3,300 2,300 2,000 4kg//cm kg//cm Weight (kg) KVT series Vortex Cooler Specications Model KVT45-60 KVT60-75 KVT-1000 Thread Rc(PT) 1/8 Rc(PT) 1/4 Rc(PT) 3/8 Pressure range 3~7kg//cm 2 4~7kg//cm 2 5~7kg//cm 2 Compressed air Consumption 260~60 /mm 660~380 /mm 1,650~1,150 /mm Cooling air / Air Consumption 15~80% 15~80% 15~75% Lowest Cooling Air Temperature Maximum temperature difference Conversion heat quantity 100kcal/116W 400kcal/465W 1000kcal/1,160W Pipelines Inner Dia. 4mm Inner Dia. 5.5mm Inner Dia. 8mm Rapid cooling by air. Desired temperature and flow rate is adjustable. Compressor capacity 2kw 5kw 11kw Weight 160g 400g 2.5 kg 152

154 KPP series Hydraulic Power Pack OTHERS KPP P L - S B 1 B - A B T P Hydraulic generator with compact design. Various configurations are available with lift and general circuit types. System can be optimized by various combinations of equipment such as motor, tank, hydraulic block and etc. Model KPP Circuit P L Hydraulic Power Pack Motor Voltage Output M11 0.2KW M21 0.5KW 011 DC 12V 0.8KW KW KW M12 0.2KW M22 0.5KW 012 DC 24V 0.8KW KW KW KW KW KW AC ø1 220V 112S 0.75KW 122S 1.8KW KW KW KW 323 AC ø3 1.5KW 323S 220/380V 1.8KW KW KW PT circuit Lift circuit Tank Capacity 1 1 Liter ø120 Round box 2 2 Liter 4 4 Liter 6 6 Liter 8 ø200 Round box 8 Liter Liter Liter 15 Square vertical 15 Liter 25 type 25 Liter Tank Type H Horizontal type Vertical type (Rectangular tank only V available for vertical type.) Additional Circuit S Sub Block + Solenoid Valve P Pliot Check Block + Solenoid Valve B Sub Block (N2 side) D Pliot Check Block (N2 side) A Cartrige Valve Block (NC) O Cartrige Valve Block (NO) L Cartrige Valve Block (Dual Locks) R Without Additional Circuit Control Voltage N DC 12V P DC 24V B AC220V Number of Solenoid Valve 1~3 1~3 pcs Pump Discharge Rate(cc/rev) Input Limit(Pmax) M M M M M M Pressure 0~25 0~250kgf/cm 2 / 10 Control Circuit B C S P O All Block PT Bypass Single Valve P-Block All Open Descent Valve Type A Solenoid Valve (NC) O Solenoid Valve (NO) L Solenoid Valve (Dual Locks) M Manual Valve (Dual Locks) Control Voltage N P B DC 12V DC 24V AC220V Descent Speed Control Valve Type Nil None T Standard P Pressure Compensation Flow Rate (Only for "L"circuit) 1~11 1~11 Liter/min Others KCC Co., Ltd. 153

155 Certi cates ISO Certificate ISO 9001 Certificate CE Certificate Air solenoid valve(ac230v) CE Certificate Air solenoid valve(dc12v) CE Certificate Air solenoid valve(dc24v) CE Certificate (KTD-600) CE Certificate (KTD-1000) POSCO's Best Quality Suppliers Reliability Certificate (KS210S) Reliability Certificate (KS328S-SW) Certificate of Patent (Air solenoid valve) Certificate of Patent (Cold resistance solenoid valve) Certificate of Utility Model Registration (Cushion for pneumatic cylinder) Certificate of Utility Model Registration (Cushion packing for pneumatic cylinder) Certificate of Utility Model Registration (Auto switch for pneumatic cylinder) Certificate of Patent (Air solenoid valve) Kotra seal of excellence 154