MODEL 3000 RIGID FRAME PLANTER (Mechanical Seed Metering) PARTS MANUAL. M Rev. 3/17. Serial Number: and later.

Transcription

1 MODEL 3000 RIGID FRAME PLANTER (Mechanical Seed Metering) PARTS MANUAL M0880 Rev. 3/7 This manual applies to: Model: 3000 Pull Type Planters Serial Number: and later Record serial number of your planter and date purchased: Serial Number Date Purchased Information in this manual was current at time of printing. However, due to Kinze s ongoing product improvement, production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves the right to change specifications or design without notice and without incurring obligation to install the same on machines previously manufactured. Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the machine will travel when in use, unless otherwise stated. Hardware Size / Tool Required /" = 7/6" 7/6" = 5/8" 3/" = /8" /" = 7/8" (nut for 7/6" hardware uses /6" tool) 5/6" = /" /" = 3/" 7/8" = 5/6" /" = /" 3/8" = 9/6" 5/8" = 5/6" " = /" Kinze, the Kinze logo, Double Frame and Interplant are registered trademarks of Kinze Manufacturing, Inc.

2 Table Of Contents M0880 ROW UNIT Shank Assembly, Seed Tube, and Depth Adjustment... P Parallel Arms, Mounting Support Plate, and Quick Adjustable Down Force Springs P3 5" Seed Opener Disc Blade/Bearing Assembly and Scrapers...P Gauge Wheels P5 Covering Discs/Single Press Wheel P7 V Closing Wheels...P9 Drag Closing Attachment P Hopper Support and Meter Drive...P3 Seed Hopper and Lid P5 Finger Pickup Seed Meter P7 BrushType Seed Meter P9 Granular Chemical Hopper and Hopper Panel Extension P Granular Chemical Meter and Meter Drive...P3 Granular Chemical Banding Options P5 Spring Tooth Incorporator...P7 Row Unit Mounted No Till Coulter...P8 Row Unit Mounted Bed Leveler P9 Row Unit Mounted Disc Furrower...P3 Row Unit Mounted Residue Wheel...P33 Coulter Mounted Residue Wheels Style A... P36 Coulter Mounted Residue Wheels Style B and C... P37 Frame Mounted Coulter W/Residue Wheels...P39 INTERPLANT SYSTEM Interplant Push Row Unit P Interplant Push Row Unit Drive...P3 Interplant SelfLeveling Hitch Extension...P5 BASE MACHINE Hitch and Frame Assembly/Safety Chain...P7 Transport and Ground Drive Wheel Assembly (Prior to 0 Production) P9 Transport and Ground Drive Wheel Assembly (0 Production and on)... P5 Contact Wheel and Arm Assembly...P53 Driveline, Row 30"/36"/38"... P55 Driveline, 6 Row 30"/36"/38" and 8 Row 30"...P56 Seed Rate Transmission Assembly...P57 Row Marker Assembly, Conventional Row 30"/36"/ 38" and 6 Row 30"...P6 Row Marker Assembly, TwoFold Low Profile 6 Row 36"/38" and 8 Row 30"...P63 Row Marker Spindle/Hub/Blade P65 Water Tank Assembly P67 HYDRAULICS Master Lift Cylinder...P68 Slave Lift Cylinder...P69 Lift Assist Cylinder, 6 Row 30"/36"/38" and 8 Row 30"... P70 Row Marker Cylinder, Row 30"/36"/38" and 6 Row 30" P7 Row Marker Cylinder, 6 Row 36"/38" and 8 Row 30"...P7 Interplant Lift Cylinder...P73 Row Marker Sequencing/Flow Control Valve P75 Hydraulic System, Row 30"/36"/38" Conventional Row Marker... P77 Hydraulic System, 6 Row 30" Conventional Row Marker... P79 Hydraulic System, 6 Row 36"/38" and 8 Row 30" TwoFold Low Profile Row Marker P8 ELECTRONICS Electrical Components and SMV Sign...P83 KPM I Electronic Seed Monitor...P85 KPM II StackMode Electronic Seed Monitor P87 KPM III Electronic Seed Monitor...P89 FERTILIZER Double Disc Fertilizer Opener...P93 HD Single Disc Fertilizer Opener (Soil Press Wheel)... P95 HD Single Disc Fertilizer Opener (Blade and Drop Tube)..... P97 Notched Single Disc Fertilizer Opener...P99 Residue Wheel Attachment for Notched Single Disc Fertilizer Opener...P03 Depth/Gauge Wheel Attachment for Notched Single Disc Fertilizer Opener...P05 Fertilizer Opener Mounting Bar (Double Disc and Notched Single Disc Fertilizer Openers)... P06 Dry Fertilizer Transmission Assembly...P07 Dry Fertilizer Hopper and Mounts...P09 Dry Fertilizer Couplers/Shafts...P Dry Fertilizer Couplers/Shafts...P Liquid Fertilizer Tanks, Saddle, Mounts, Hoses, and Fittings, Row... P3 Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings, 6 and 8 Row...P5 Liquid Fertilizer Piston Pump Drive...P7 Liquid Fertilizer Piston Pump (Crankcase Assembly) Uses 8 Tooth Sprocket.... P Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket... P3 Liquid Fertilizer Piston Pump Uses 8 Tooth Sprocket...P5 Liquid Fertilizer Piston Pump Flow Divider...P7 Liquid Fertilizer Squeeze Pump Mounting Bracket and Drive...P9 i Rev. /6

3 M0880 Table Of Contents Liquid Fertilizer Squeeze Pump, Row P3 Liquid Fertilizer Squeeze Pump, 6 Row P3 Liquid Fertilizer Squeeze Pump, 8 Row P33 Liquid Fertilizer Tube In Furrow...P3 MISCELLANEOUS Decals, Paint, and Miscellaneous... P35 Numerical Index P Rev. /6 ii

4 Shank Assembly, Seed Tube, and Depth Adjustment M0880 (METR9cc) P Rev. 6/5

5 M0880 Shank Assembly, Seed Tube, and Depth Adjustment ITEM PART NO. QTY. DESCRIPTION (Per Row) G05 Hex Washer Head Cap Screw, ⅜"6 x ¼" GB07 Cover, Depth Adjustment 3 GB066 Handle, Depth Adjustment GB067 Lever, Depth Adjustment 5 GD36 Cap Plug 6 GD0993 Spring 7 GD336 Pin, ⅜" x ⅔" 8 GD59 Sleeve, ⅜" I.D. x ⅝" O.D. x 5 3" Long 9 G59 G59 0 G G33036 GR096 GD06 Sleeve, 3 6" Long G00 Special Washer, ⅜" x ½" O.D. 3 GD065 Idler Spring GD738 Sleeve, " Long 5 G008 Lock Nut, ⅜"6 6 G387 Flat Washer, ⅜" SAE 7 GD96 Idler 8 G0003 G Hex Head Cap Screw, ⅜" x ¾", Grade 8 Nylon Lock Nut, ⅜", Grade C Chain, No., 98 Pitch Including Connector Link Chain, No., 6 Pitch Including Connector Link (Used W/Row Unit Extension Brackets) Connector Link, No. Hex Head Cap Screw, ⅜"6 x ½" Lock Nut, ⅜"6 9 GD55 Row Unit Stop 0 G036 Hex Head Cap Screw, ⅜"6 x 3¾" G055 G0669 G03 G060 Clevis Pin, ¼" x ½" Hair Pin Clip, No. Carriage Bolt, 5 6"8 x ¾" Serrated Flange Nut, 5 6"8 3 GD8390 Shield See Gauge Wheels on page P5 5 GA057 GD00 G038 Shank W/Gauge Wheel Pivot Spindle and Set Screw Spindle Hex Head Cap Screw, ½"3 x ¾" 6 G007 Washer, ⅞" O.D. x 3 3" I.D. x.3" (If Applicable) 7 GD85 Dust Cap 8 9 GB085 Collar, Depth Adjustment 30 GB065 Pivot Link, Depth Adjustment 3 GD5970 Sun Shade 3 G030 G008 See KPM I Electronic Seed Monitor on page P85 See KPM II StackMode Electronic Seed Monitor on page P87 See KPM III Electronic Seed Monitor on page P89 Carriage Bolt, ⅜"6 x 3" Lock Nut, ⅜"6 33 GD65 Sun Shade (Rubber) 3 GD9806 Seed Tube Bracket Rev. 6/5 P

6 Parallel Arms, Mounting Support Plate, and Quick Adjustable Down Force Springs M0880 RUB0/RUB0(RU78k/B0366) ITEM PART NO. QTY. (Per Row) GD G030 G00 DESCRIPTION UBolt, 7" x 7" x ⅝" Lock Washer, ⅝" Hex Nut, ⅝" GD0036 Mounting Support Plate 3 GB08 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long GD Upper Parallel Arm 5 G073 G39 G5 Hex Head Cap Screw, ⅝"8 x " Flat Washer, ⅝" SAE Lock Nut, ⅝"8 6 GB086 Spring Anchor 7 GD7 Tab Lock Pin, 7 6" x ½" 8 GD89 Spring 9 See Hopper Support and Meter Drive on page P3 0 GA565 Lower Parallel Arm GA70 Bearing/Sprocket, ⅞" Hex Bore G000 G09 G00 3 G0007 G030 G00 Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 Hex Head Cap Screw, ⅝" x ½" Lock Washer, ⅝" Hex Nut, ⅝" GB0366 Extension Bracket A G636X UBolt Package For 7" x 7" Toolbar, Includes: () GD, () G030, () G00 P3 Rev. 3/7

7 M0880 5" Seed Opener Disc Blade/Bearing Assembly and Scrapers (RU39) ITEM PART NO. QTY. DESCRIPTION (Per Row) G038 G06 Hex Head Cap Screw, ⅜"6 x ⅝" Serrated Flange Nut, ⅜"6 GA0R GA0L Disc Scraper, R.H. Disc Scraper, L.H. (Shown) 3 G07 Rivet, ¼" x ½" GD07 G0007 Special Hex Head Cap Screw, ⅝" x ½", L.H. Threads Hex Head Cap Screw, ⅝" x ½" 5 GD85 Dust Cap 6 G00 Special Machine Bushing, ⅝" x " O.D. 7 GD073 Bearing Housing 8 GA0 Bearing 9 GD306 Disc Blade, 3.5 mm x 5" 0 GD3075 Machine Bushing, ⅝" (.030" Thick) (As Required) See Shank Assembly, Seed Tube, and Depth Adjustment on page P GB030 Seed Tube Guard/Inner Scraper 3 G09 Hex Socket Head Cap Screw, 5 6"8 x ", Grade 8 G035 G06 Hex Head Cap Screw, ⅜"6 x ¾" Serrated Flange Nut, ⅜"6 5 GD976 Sleeve, ⅜" I.D x 5/8" O.D. x.63" Long A GA83 Disc Blade/Bearing Assembly, Less Dust Cap (Items 3 and 79) Rev. /6 P

8 Gauge Wheels M0880 (IP68) P5 Rev. 6/

9 M0880 Gauge Wheels ITEM PART NO. QTY. DESCRIPTION (Per Row) GA057 See Shank Assembly, Seed Tube, and Depth Adjustment on page P GA7975 GA7976 Wheel Arm W/Grease Fitting, Bushings, and Seals, L.H. (Shown) (Includes Items 3 and 3) Wheel Arm W/Grease Fitting, Bushings, and Seals, R.H. (Includes Items 3 and 3) 3 GB076 Bushing, " I.D. x ¼" O.D. x " Long (Per Arm) G00 G08 G06 5 GD366 Half Wheel 6 GD086 Tire 7 GD53 Cover 8 G09 G060 9 G0338 G Hex Head Cap Screw, ½"3 x " Lock Washer, ½" Washer, ½" USS Carriage Bolt, 5 6"8 x ¾" Serrated Flange Nut, 5 6"8 Carriage Bolt, 5 6"8 x ¼" Serrated Flange Nut, 5 6"8 0 G000 Hex Head Cap Screw, ⅝" x 3" G008 G009 Hex Head Cap Screw, 5 6"8 x ⅝" Lock Nut, 5 6"8, Grade 8 GA67 Bearing 3 GD099 Seal (Per Arm) G00 Special Machine Bushing, ⅝" x " O.D. 5 G060 Grease Fitting, ¼"8 (Per Arm) 6 G090 Machine Bushing, " (.08" Thick) A GA799 Gauge Wheel Complete (Items 59 and ) B GK96 Gauge Wheel Arm Bushing and Seal Driver Kit, Includes: () Seal Driver, () Bushing Driver, () Instruction Rev. 3/7 P6

10 Covering Discs/Single Press Wheel M0880 RUA05/RUB06(RU9d) P7 Rev. 6/

11 M0880 Covering Discs/Single Press Wheel ITEM PART NO. QTY. (Per Row) G000 G387 DESCRIPTION Hex Head Cap Screw, ⅜"6 x " Flat Washer, ⅜" SAE GB068 Wheel Arm Stop 3 G9 G035 G00 GA05 Spring 5 GB039 Eccentric Bushing 6 G00 Hex Nut, ½"3 7 G005 Adjusting Bolt, ½"3 x 5" 8 GA669 Mounting Arm 9 G063 Cotter Pin, ¼" x ½" 0 G07 G03 G006 GA660 Bracket GA668 Mount 3 G0303 G386 G03 G006 Carriage Bolt, ½"3 x ¼" Carriage Bolt, ½"3 x ½" (Used W/Straight Drop InFurrow Granular Chemical Bracket) Hex Nut, ½"3 Hex Head Cap Screw, 5 6"8 x ¼" Lock Washer, 5 6" Hex Nut, 5 6"8 Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Lock Washer, 5 6" Hex Nut, 5 6"8 G007 3 Lock Nut, ⅝" 5 GD09 Bushing, 6" I.D. x ⅞" O.D. x ¼" Long 6 GD990 Disc Blade, 8" 7 G008 G Hex Head Cap Screw, 5 6"8 x ⅝" Lock Nut, 5 6"8, Grade 8 8 G05 Hex Head Cap Screw, ⅝" x 9" 9 GD380 Sleeve, ⅝" I.D. x ⅞" O.D. x ⅞" Long 0 GD956 Half Wheel GA67 Bearing GD9305 Tire 3 GA0 Bearing GD073 Bearing Housing 5 G07 Rivet, ¼" x ½" 6 G0006 Hex Head Cap Screw, ⅝" x ¼" 7 GD85 Dust Cap A GA6733 Single Press Wheel Complete W/Bearing (Items 7 and 0) B GA680 Covering Disc Blade Complete W/Bearing (Items 6 and 35) Rev. 3/7 P8

12 V Closing Wheels M0880 (IP08) P9 Rev. /6

13 M0880 V Closing Wheels ITEM PART NO. QTY. (Per Row) GD90 G006 DESCRIPTION Nylon Half Wheel Hex Head Cap Screw, ¼"0 x " GD085 Rubber Tire, " x " 3 GA67 Bearing GA6597 GA67 5 GB05 G033 G009 Cast Iron Closing Wheel W/Bearing Bearing Lever Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 6 GA597 Closing Wheel Arm 7 GB068 Wheel Arm Mount 8 G000 G387 9 G9 G035 G387 0 GB08 Stepped Bushing GB039 Eccentric Bushing G0 Lock Nut, ½"3 3 GD860 Spring GK35 GD66 G0599 G0308 G00 G09 G387 5 G003 G39 GD09 G030 G Hex Head Cap Screw, ⅜"6 x " Flat Washer, ⅜" SAE Carriage Bolt, ½"3 x ¼" Carriage Bolt, ½"3 x ½" (Used W/Straight Drop InFurrow Granular Chemical Bracket) Flat Washer, ⅜" SAE Closing Wheel Shield Kit W/Hardware and Instruction Closing Wheel Shield (Included W/GK35) Carriage Bolt, ⅜"6 x ¼" (Included W/GK35) Carriage Bolt, ⅜"6 x ¾" (Included W/GK35) Hex Nut, ⅜"6 (Included W/GK35) Lock Washer, ⅜" (Included W/GK35) Hardened Washer, ⅜" SAE (Included W/GK35) Hex Head Cap Screw, ⅝" x 3½" Flat Washer, ⅝" SAE Bushing, 6" I.D. x ⅞" O.D. x ¼" Long Lock Washer, ⅝" Lock Nut, ⅝" 6 GD3353MPP Spiked Wheel Insert (Package of ) A GA63 Rubber Closing Wheel Complete W/Bearing (Items 3) Rev. 3/7 P0

14 Drag Closing Attachment M0880 (IP0) ITEM PART NO. QTY. DESCRIPTION (Per Row) GD509 Rear Bracket G0007 G030 G00 Hex Head Cap Screw, ⅝" x ½" Lock Washer, ⅝" Hex Nut, ⅝" 3 GA597 Closing Wheel Arm GD33 Blade 5 GD508 Front Bracket 6 G0599 G09 G387 G Carriage Bolt, ⅜"6 x ¼" Lock Washer, ⅜" Flat Washer, ⅜" SAE Hex Nut, ⅜"6 A G7566X Drag Closing Attachment Complete (Items 6) P Rev. 5/

15 This page left blank intentionally.

16 Hopper Support and Meter Drive M0880 (METRd) P3 Rev. 6/

17 M0880 Hopper Support and Meter Drive ITEM PART NO. QTY. DESCRIPTION (Per Row) GB03 Hopper Mount GB08 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long 3 G075 G39 G5 G075 G39 G5 Hex Head Cap Screw, ⅝"8 x ¼" Flat Washer, ⅝" SAE Lock Nut, ⅝"8 Hex Head Cap Screw, ⅝"8 x ¾" Flat Washer, ⅝" SAE Lock Nut, ⅝"8 5 G060 Spring Pin, ¼" x ½" 6 G0567 External Retaining Ring, ⅝" 7 GD39 Knob 8 G0338 G060 Carriage Bolt, 5 6"8 x ¼" Serrated Flange Nut, 5 6"8 9 GB033 Clutch Adapter Plate 0 G006 G387 G008 G0309 G06 Hex Head Cap Screw, ⅜"6 x 3½" Flat Washer, ⅜" SAE Lock Nut, ⅜"6 Carriage Bolt, ¼"0 x ⅝", Grade Serrated Flange Nut, ¼"0 GA007 Hopper Hold Down Latch 3 GA055 Hopper Support GA037 Double Sprocket and Bearing, Drive Clutch, /9 Tooth 5 GD3 Spring 6 GD577 Shaft 7 GB078 Coupler 8 G056 Spring Pin, 3 6" x ¼" A GA05 Seed Meter Clutch Assembly, /9 Tooth (Items 57 and 8) Rev. /6 P

18 Seed Hopper and Lid M0880 (RU87e/RU87a) ITEM PART NO. QTY. DESCRIPTION (Per Row) GD79 Lid GA97 GD56 3 GD77 Seed Reserve Baffle Seed Hopper, Reinforced Threaded Insert, 5/6"8 (Included W/GA97) P5 Rev. 5/

19 This page left blank intentionally.

20 Finger Pickup Seed Meter M0880 RUA05/RUA056/RUA057(RU3k/RU3d) Left Rear View Of Complete Meter P7 Rev. 5/3

21 M0880 Finger Pickup Seed Meter ITEM PART NO. QTY. DESCRIPTION (Per Row) G060 Spring Pin, ¼" x ½" G060 Spring Pin, 3 6" x ½" 3 GD69 Housing Cover GD0 Belt Drive Sprocket 5 GD86 Seed Belt 6 GA09 Bearing 7 GA80 Conveyor Housing 8 GB00 Bearing Housing 9 GR569 GR066 GA00 G0690 Carrier Plate W/Brush and Screw (Corn) Carrier Plate W/Brush and Screw (Sunflower) Brush Rolling Thread Screw, No. 0 x ¾" 0 G00 3 Slotted Hex Washer Head Screw, No. 03 x ⅝" GD870 Finger, Corn GD9790 Spring 3 GB00 Cam GD58 GD659 Finger Holder (Corn and Sunflower Used With GR88) Finger Holder (Corn and Sunflower Used With GR5) 5 G070 Cotter Pin, 5 3" x " 6 G009 Locking Thumbscrew, 5 6"8 x ¾" 7 GD3 Seed Baffle 8 GD083 Cover Nut 9 G0500 Jam Nut, ⅝"8 UNF 0 GA833 Wave Washer, ⅝" (Triple Wave) G000 G033 G00 G06 3 G00 G Hex Head Cap Screw, ¼"0 x ⅝" Hex Flange Nut, ¼"0, No Serrations Hex Head Cap Screw, ¼"0 x ½" Serrated Flange Nut, ¼"0 Hex Head Cap Screw, ¼"0 x ½" Serrated Flange Nut, ¼"0 G0603 Spring Pin, ¼" x ¼" 5 GD0 Idler 6 GB00 Bushing, 7 6" I.D. x 3" Long 7 GD9333 Finger, Oil Sunflower 8 GD5698 Shank Cover, Finger Pickup Seed Meter 9 GD787 Half Rate Blank Finger 30 GB00 Cam (Sunflower) A GR88 Finger Assembly, Corn (Items and 0) B GR5 Finger Assembly, Sunflower (Items,, 0, 7, and 30) C Corn Meter Assembly (Items 6 and 8) D Sunflower Meter Assembly (Items 0,, 5, 77, and 30) Rev. /5 P8

22 BrushType Seed Meter M0880 RUA037/RUA056/RUA057(RUf) Left Rear View Of Complete Meter Used W/ Soybean and Cotton Discs Used W/ Milo/Grain Sorghum Discs ¾" ⅜" P9 Rev. 6/

23 M0880 BrushType Seed Meter ITEM PART NO. QTY. DESCRIPTION (Per Row) G009 Locking Thumbscrew, 5 6"8 x ¾" GA808 GA GA6038 GD755 Housing W/Bearing Bearing (Included W/GA808) Hub W/Shoulder Bolts Shoulder Bolt, ¼"0 ( Used) G0603 Spring Pin, ¼" x ¼" 5 G060 Spring Pin, ¼" x ½" 6 GD8778 Wear Strip 7 GA5699 Upper Brush 8 GD Upper Brush Retainer (Used W/Soybean and Cotton Discs) 9 GA583 Lower Brush 0 GA579 GA68 GA5796 GA668 GA678 GA68 GA755 G053 Wing Nut W/Nylon Insert, ¼"0 G5 G063 9 Seed Disc, Soybean, 60 Cell, Black ColorCoded Seed Disc, Specialty Soybean, 8 Cell, Dark Blue ColorCoded Seed Disc, Cotton, AcidDelinted, 30 Cell, White ColorCoded Seed Disc, Large Cotton, AcidDelinted, 36 Cell, Tan ColorCoded Seed Disc, HighRate Cotton, AcidDelinted, 8 Cell, Light Green ColorCoded Seed Disc, HillDrop Cotton, AcidDelinted, Cell, Brown ColorCoded Seed Disc, Small HillDrop Cotton, AcidDelinted, Cell, Dark Green ColorCoded Hex Washer Head Screw, No. 06 x ½" Slotted Tap Screw, No. 0 x ⅝" (Use As Required) 3 GD7878 Cover GD5699 Shank Cover, BrushType Seed Meter 5 GA598 GA687 GA5795 GA6633 Seed Disc, Small Milo/Grain Sorghum, 30 Cell, Red ColorCoded Seed Disc, Large Milo/Grain Sorghum, 30 Cell, Light Blue ColorCoded Seed Disc, HighRate Small Milo/Grain Sorghum, 60 Cell, Red ColorCoded Seed Disc, HighRate Large Milo/Grain Sorghum, 60 Cell, Yellow ColorCoded 6 GD837 Upper Brush Retainer (Used W/Milo/Grain Sorghum Discs) A Brush Meter (Items 9 and ) Rev. 5/3 P0

24 Granular Chemical Hopper and Hopper Panel Extension M0880 (METRd) P Rev. 6/

25 M0880 Granular Chemical Hopper and Hopper Panel Extension ITEM PART NO. QTY. DESCRIPTION (Per Row) G387 3 Flat Washer, ⅜" SAE GD970 Sleeve, 9 6" Long 3 GD9 Spring G00 Special Washer, ⅜" x ½" O.D. 5 GD06 Sleeve, 3 6" Long 6 GD96 Idler 7 G008 Lock Nut, ⅜"6 8 G0670 Hair Pin Clip, No. 3 9 GD059L GD059R 0 G000 G09 G03 G Support, L.H. (Shown) Support, R.H. Hex Head Cap Screw, ⅜"6 x ¾" Lock Washer, ⅜" Carriage Bolt, 5 6"8 x ¾" Serrated Flange Nut, 5 6"8 G035 Hex Head Cap Screw, ⅜"6 x ¾" 3 G External Retaining Ring, ⅝" GD305 Plate 5 A0759 Hopper Panel Extension (NonStock Item) (Sub Wholegoods Order Code ) 6 GD Block 7 G003 G06 Hex Head Cap Screw, ¼"0 x ¾" Serrated Flange Nut, ¼"0 8 GD060 Hinge 9 GA837 Hopper 0 GA Lid GD39 Knob G060 Spring Pin, ¼" x ½" Rev. 6/ P

26 Granular Chemical Meter and Meter Drive M0880 RUA05/RUB08(RU9a) ITEM PART NO. QTY. DESCRIPTION (Per Row) G External Retaining Ring, ⅝" GD39 Knob 3 G060 Spring Pin, ¼" x ½" See Granular Chemical Hopper and Hopper Panel Extension on page P 5 GA836 Sprocket and Bearing, Drive Clutch, Tooth 6 GD3 Spring 7 GD0 Shaft 8 GB078 Coupler 9 G056 Spring Pin, 3 6" x ¼" 0 GD97 Shaft G793 Hex Socket Head Cap Screw, No. 0 x ⅞" GD78 Feed Roller, Hex Bore 3 GB05 Bearing GD758 Hex Bushing 5 G3303 GR096 Chain, No., Pitch Including Connector Link Connector Link, No. 6 G0660 Wave Washer, ½" 7 G385 Flat Washer, ¼" SAE 8 G0570 Slotted Hex SelfTapping Screw, ¼"0 x ¾" 9 G073 Slotted Hex SelfTapping Screw, No. 0 x ⅜" 0 GD06 Support Strap GD063 Metering Gate GB06 Granular Housing A GA836 Granular Chemical Meter Complete (Items, 9, 0, and 6) B GA8366 Granular Chemical Meter Clutch (Items 3 and 59) P3 Rev. /6

27 This page left blank intentionally.

28 Granular Chemical Banding Options M0880 RUA06/RUA073(RU0mm/RU83m) P5 Rev. 6/

29 M0880 Granular Chemical Banding Options ITEM PART NO. QTY. DESCRIPTION GD3 Funnel G09 Wire Hose Clamp, ¾" 3 GD97 Hose, 7 6" x 8" G053 Slotted Pan Head SelfTapping Screw, No. 0 x ½" 5 GA6907 G086 G0757 G GD0963 G385 G00 7 GD098 Spacer 8 GD5L Hanger Bracket, L.H. 9 G05 Cotter Pin, ⅛" x ½" 0 GD5R Hanger Bracket, R.H. G030 G07 G003 SlopeCompensating Bander W/Hardware (½" Band Width) UniClamp (Included W/GA6907) Pan Head Screw, No. 03 x ¼" (Included W/GA6907) Hex Nut, No. 03 (Included W/GA6907) UBolt, ½" x 5 6" x ¼"0 Flat Washer, ¼" SAE Lock Nut, ¼"0, Grade B Carriage Bolt, ¼"0 x ¾", Grade Lock Washer, ¼" Hex Nut, ¼"0 GD6 Hanger 3 GA075 Diffuser, " Band G0306 G09 G00 Carriage Bolt, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 5 GD8 Clamp 6 G035 Carriage Bolt, ½"3 x ½" (Replaces Existing ½" x ¼" Hardware) 7 GA67 Bracket (Straight Drop InFurrow) 8 GK385 G0003 G387 Bander Shield Kit W/Hardware and Instruction Hex Head Cap Screw, ⅜"6 x ½" (Included W/GK385) Flat Washer, ⅜" SAE (Included W/GK385) Rev. 6/ P6

30 Spring Tooth Incorporator M0880 RUA055(RU95) ITEM PART NO. QTY. DESCRIPTION (Per Row) G06 Serrated Flange Nut, ¼"0 GD60 Eyebolt, ¼"0 3 G33050 Twin Loop Chain, 9 Links GD3 Front Bracket 5 G0305 G059 G06 6 GD5 7 Spring Tooth 7 G0305 G Carriage Bolt, ⅜"6 x " External Tooth Lock Washer, ⅜" Serrated Flange Nut, ⅜"6 Carriage Bolt, ⅜"6 x " Serrated Flange Nut, ⅜"6 8 GD Rear Bracket 9 GA09 Cable Assembly P7 Rev. 6/

31 M0880 Row Unit Mounted No Till Coulter (D398/RU0c/RU5) STYLE A STYLE B ITEM PART NO. QTY. (Per Row) G057 G0 DESCRIPTION Carriage Bolt, ½"3 x ¼" Lock Nut, ½"3 GA565 Arm (Style A) 3 G0036 G007 G057 G0 5 GD677 Adapter 6 GA86 GA8603 GD99 7 GD7803 GD780 GD95 8 GD398 Spacer 9 GA50 Arm (Style B) Hex Head Cap Screw, ⅝" x " Lock Nut, ⅝" Carriage Bolt, ½"3 x ¼" Lock Nut, ½"3 Hub W/Bearing and Retaining Ring Bearing, Double Row (Included W/GA86) Retaining Ring, 7 6" (Included W/GA86) Disc Blade, Fluted, ", 8 Flutes (Shown) Disc Blade, Bubbled, " Disc Blade, Fluted, ¾", 3 Flutes Rev. 6/ P8

32 Row Unit Mounted Bed Leveler M0880 RUA059/RUA060(RU99/RU00) P9 Rev. 6/

33 M0880 Row Unit Mounted Bed Leveler ITEM PART NO. QTY. DESCRIPTION (Per Row) G0536 Detent Pin, ½" x ½" Grip G0597 Square Head Set Screw, ⅝" x ¼" 3 G0503 Hex Jam Nut, ⅝", Grade GA579 Mounting Bracket 5 GD Bushing, " O.D. x 9 6" I.D. x 7 6" Long 6 G0039 G389 G0 7 G0585 G389 G0 8 GD7890 Link 9 G007 G389 G0 0 GA575 Anchor G007 G0 GA589 Leveler 3 G0303 G386 G009 GD866 Blade 6 6 Hex Head Cap Screw, ½"3 x ¾" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x 3¼" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Lock Nut, ½"3 Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Lock Nut, 5 6"8, Grade 8 Rev. 6/ P30

34 Row Unit Mounted Disc Furrower M0880 RUA059/RUA058(RU99/RU98g) P3 Rev. 6/

35 M0880 Row Unit Mounted Disc Furrower ITEM PART NO. QTY. DESCRIPTION (Per Row) G0536 Detent Pin, ½" x ½" Grip G0597 Square Head Set Screw, ⅝" x ¼" 3 G0503 Hex Jam Nut, ⅝", Grade GA579 Mounting Bracket 5 GD Bushing, " O.D. x 9 6" I.D. x 7 6" Long 6 G0039 G389 G0 7 G0585 G389 G0 8 GD7890 Link 9 G007 G389 G0 0 GA575 Anchor G007 G0 GA578 Support Arm 3 G057 G006 GD3 Dust Cap 5 G038 G39 6 GA565 GA0 7 GD783 GD GD7870 GD Hex Head Cap Screw, ½"3 x ¾" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x 3¼" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Lock Nut, ½"3 Truss Head Slotted Machine Screw, 5 6"8 x ⅞" Hex Nut, 5 6"8 Hex Head Cap Screw, ⅝" x ½" Flat Washer, ⅝" SAE Hub W/Bearings Bearing (Included W/GA565) Disc Blade, Solid, " (Shown) Disc Blade, Notched, " Spacer, 6" I.D. x ¾" Long Spacer, 6" I.D. x ½" Long Rev. 6/ P3

36 Row Unit Mounted Residue Wheel M0880 (RU03dd/RU03d) STYLE B STYLE A P33 Rev. 6/

37 M0880 Row Unit Mounted Residue Wheel ITEM PART NO. QTY. DESCRIPTION (Per Row) GD3 Dust Cap GD055 Wheel, Tine, ⅜" x " 3 G0006 Hex Head Cap Screw, ⅝" x ¼" GD97 Backing Plate 5 G033 G Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 6 GD970 Spacer, ½" x 3 6" Long 7 GA6838 Wheel Mount 8 G0033 G08 G00 9 GD5857 Spring 0 G005 G08 G00 G038 G0 Hex Head Cap Screw, ½"3 x 3½" Lock Washer, ½" Hex Nut, ½"3 GD975 Spacer, ½" x 3" Long 3 GA683 Lower Link GA683 Mount 5 G057 G0 6 GA6833 Upper Link 7 G037 G050 8 GA565 GA0 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ½"3 x 5" (Lockup Bolt) Lock Nut, ½"3 Carriage Bolt, ½"3 x ¼" Lock Nut, ½"3 Hex Head Cap Screw, ½"3 x 3", Full Thread Hex Jam Nut, ½"3, Grade Hub W/Bearings Bearing 9 GD53 Cover 0 GB0387 Wheel, Tine, ⅜" x " A GA76 Wheel Assembly, Tine, R.H. (Items,, 5 and 8) B GA36 Wheel Assembly, Tine, R.H. (Items, 5, 8 and 0) Rev. 6/ P3

38 This page left blank intentionally.

39 M0880 Coulter Mounted Residue Wheels Style A (RU0uuu/RU53) STYLE A Used With Style A Row Unit Mounted No Till Coulter ITEM PART NO. QTY. DESCRIPTION (Per Row) GD3 Dust Cap G000 G0503 Hex Head Cap Screw, ⅝" x 3" Hex Jam Nut, ⅝", Grade 3 GD055 Wheel, Tine, ⅜" x " GA565 GA0 Hub W/Bearings Bearing (Included W/GA565) 5 GA5 Cam 6 GD059 Spring 7 G389 Flat Washer, ½" SAE 8 G097 Lock Nut W/Nylon Insert, ½"3 9 G098 G389 G097 Hex Head Cap Screw, ½"3 x 9½", Grade 8 Flat Washer, ½" SAE Lock Nut W/Nylon Insert, ½"3 0 GA77 Mount GD056 Sleeve, 7½" G03 Machine Bushing, ⅝" (.030" Thick) 3 GA8760 G0765 G033 G009 5 GD97 Backing Plate Weed Guard W/Spring Pin Spring Pin, ¼" x " (Included W/GA8760) Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 A GA76 GA75 Wheel Assembly, Tine, R.H. (Items 3,, and 5) (Shown) Wheel Assembly, Tine, L.H. (Items 3,, and 5) Rev. / P36

40 Coulter Mounted Residue Wheels Style B and C M0880 (IP68) STYLE B and C Used With Style A Row Unit Mounted No Till Coulter Style B P37 Rev. /

41 M0880 Coulter Mounted Residue Wheels Style B and C ITEM PART NO. QTY. DESCRIPTION (Per Row) GB06 Residue Wheel Mount GD6973 Cam Locking Pin 3 G09 Lock Washer, ⅜" G000 Hex Head Cap Screw, ⅜"6 x ¼" 5 GA5 Cam 6 GD059 Spring 7 G389 Flat Washer, ½" Plated SAE 8 G0003 G09 9 GA50 Locking Pin 0 G36 G39 GB0383 G8 GA8760 G0765 Hex Head Cap Screw, ⅜"6 x ½" Lock Washer, ⅜" Hex Head Cap Screw, ¾"0 x 0½" Flat Washer, ¾" SAE Bushing, ⅛" O.D. x 5 3" I.D. x ¾" Long Lock Nut, ¾"0 Weed Guard W/Spring Pin Spring Pin, ¼" x " GD3075 Machine Bushing, ⅝" (.030" Thick) 3 GB0387 Wheel, Tine, ⅜" x " GA565 GA0 Hub W/Bearings Bearing (Included W/GA565) 5 GD97 Backing Plate 6 G033 Hex Head Cap Screw, 5/6"8 x ½" 7 G009 Lock Nut, 5/6"8, Grade 8 8 G097 Lock Nut W/Nylon Insert, ½"3 9 G000 Hex Head Cap Screw, ⅝" x 3" 0 G0503 Hex Jam Nut, ⅝", Grade GD3 Dust Cap GB06 Residue Wheel Mount A GA35 L.H. Residue Wheel (Items 37) B GA36 R.H. Residue Wheel (Items 37) C GK53 Residue Wheel Mount Kit (Items and 80) Rev. /6 P38

42 Frame Mounted Coulter W/Residue Wheels M0880 (RU35c/RU35g/RU53b/RU35hh) With Residue Wheels STYLE B STYLE A P39 Rev. 6/

43 M0880 Frame Mounted Coulter W/Residue Wheels ITEM PART NO. QTY. DESCRIPTION (Per Row) G00 Hex Head Cap Screw, ¾"0 x " GA98 Plate W/Angle 3 G0039 Hex Head Cap Screw, ½"3 x ¾" GA93 Coulter Frame 5 G0007 Hex Head Cap Screw, ⅝" x ½" G007 Lock Nut, ⅝" 6 G000 G0 7 GD86 Spring Anchor Bar 8 G057 G0 9 GD87 Adapter 0 GA86 GA8603 GD99 GD7803 GD780 GD95 Hex Head Cap Screw, ¾"0 x 6½" Lock Nut, ¾"0 Carriage Bolt, ½"3 x ¼" Lock Nut, ½"3 Hub W/Bearing and Retaining Ring Bearing, Double Row (Included W/GA86) Retaining Ring, 7 6" (Included W/GA86) Disc Blade, Fluted, ", 8 Flutes (Shown) Disc Blade, Bubbled, " Disc Blade, Fluted, ¾", 3 Flutes GB03 Spring Seat 3 GD87 Compression Spring GD89 Sleeve 5 G006 G007 Hex Head Cap Screw, ⅝" x 5" Lock Nut, ⅝" 6 GA985 G063 Coulter Arm W/Grease Fitting Grease Fitting, 5, ¼"8 (Included W/GA985) 7 G00 G007 Hex Head Cap Screw, ⅝" x 5½" Lock Nut, ⅝" 8 GB08 3 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long 9 GD3 Dust Cap 0 G000 G0503 Hex Head Cap Screw, ⅝" x 3" Hex Jam Nut, ⅝", Grade GD055 Wheel, Tine, ⅜" x " GA565 GA0 Hub W/Bearings Bearing (Included W/GA0) 3 GD97 Backing Plate G033 G009 Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 5 G03 Machine Bushing, ⅝" (.030" Thick) 6 GA986 G0765 Weed Guard W/Spring Pin Spring Pin, ¼" x " (Included W/GA986) 7 GA9865 Mount 8 GA986 Cam 9 GD059 Spring 30 G097 Lock Nut W/Nylon Insert, ½"3 3 G0005 G007 Hex Head Cap Screw, ⅝" x ¾" Lock Nut, ⅝" 3 GA53 Cam Support 33 G00 G00 Hex Head Cap Screw, ½"3 x " Hex Nut, ½"3 3 G00 G39 G0730 Hex Head Cap Screw, ⅝" x 5½" Flat Washer, ⅝" SAE Lock Nut W/Nylon Insert, ⅝" 35 GD70 Sleeve, 3" 36 GB0387 Wheel, Tine, ⅜" x " A B GA76 GA75 GA36 GA35 Wheel Assembly, Tine, R.H. (Items ) (Shown) Wheel Assembly, Tine, L.H. (Items ) Wheel Assembly, Tine, R.H. (Items, 3, and 36) (Shown) Wheel Assembly, Tine, L.H. (Items, 3, and 36) Rev. 5/3 P0

44 Interplant Push Row Unit M0880 NOTE: Push row units use the same seed tube, row unit depth adjustment components, quick adjustable down force springs, 5" opener disc blades, gauge wheels, closing wheels, meter drive and seed hopper as the pull row unit. See those pages for common parts P Rev. /

45 M0880 Interplant Push Row Unit ITEM PART NO. QTY. DESCRIPTION (Per Row) GD06 Sleeve, 3 6" Long GD8 Spring 3 G00 Special Washer, ⅜" x ½" O.D. GD88930 Sleeve, ⅜" Long 5 GB0968 Idler 6 G387 Flat Washer, ⅜" SAE 7 G008 Lock Nut, ⅜"6 8 G GR096 Chain, No., 96 Pitch Including Connector Link Connector Link, No. 9 GA06 Push Row Unit Shank 0 GB03 Hopper Mount G075 G5 Hex Head Cap Screw, ⅝"8 x ¾" Lock Nut, ⅝"8 G0599 G00 G008 Carriage Bolt, ⅜"6 x ¼" Hex Nut, ⅜"6 Lock Nut, ⅜"6 3 G0307 Carriage Bolt, ⅜"6 x 3½" GD0867 Stop 5 G000 G008 Hex Head Cap Screw, ⅜"6 x ¼" Lock Nut, ⅜"6 6 GB030 Seed Tube Guard/Inner Scraper 7 G09 Hex Socket Head Cap Screw, 5 6"8 x ", Grade 8 8 G075 G39 G5 Hex Head Cap Screw, ⅝"8 x ¾" Flat Washer, ⅝" SAE Lock Nut, ⅝"8 9 GB08 8 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long 0 GA8930 Upper Arm GA5787 Lower Arm G073 G39 G5 Hex Head Cap Screw, ⅝"8 x " Flat Washer, ⅝" SAE Lock Nut, ⅝"8 3 GA70 Bearing/Sprocket, ⅞" Hex Bore G000 G09 Hex Head Cap Screw, ⅜"6 x ¼" Serrated Flange Nut, ⅜"6 5 GA5786 Mounting Plate 6 GD GD3 G030 G00 UBolt, 7" x 7" x ⅝" UBolt, 5" x 7" x ⅝" Lock Washer, ⅝" Hex Nut, ⅝" 7 GA97 Mounting Plate 8 GD6 G078 Lockup Spring Pin, 5/6" x ⅛" 9 G063 Cotter Pin, ¼" x ½" 30 GD5569 Spring 3 G08 Clevis Pin, ½" x ½" 3 GD5568 GD959 Spring Mount Tab, L.H. Spring Mount Tab, R.H. 33 G06 3 Washer, ½" USS 3 G05 Cotter Pin, ⅛" x " 35 GD8073 Bracket (Lift Lever) 36 GD9695 Wire Lock Pin, ¼" x ¾" 37 GD807 Mount 38 G387 Flat Washer, ⅜" SAE 39 GA969 Upper Arm A GK53 Push Unit LockUp Kit, Items 83 (includes GD68 Push Unit Stop) B GK535 Push Unit Spring LockUp Kit, Items 83 Rev. 6/5 P

46 Interplant Push Row Unit Drive M0880 PTD093(PT75e) Direction Of Travel P3 Rev. 6/

47 M0880 Interplant Push Row Unit Drive ITEM PART NO. QTY. DESCRIPTION GA877 Front Mount G033 5 Machine Bushing, ", 0 Gauge 3 G030 G093 Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration GD05 Lock Clamp 5 GD098 GD0905 GD09 GD0980 GD0905 Hex Shaft, ⅞" x 8" (No Holes), Row 30" Hex Shaft, ⅞" x 05" (No Holes), Row 36"/38" Hex Shaft, ⅞" x " (No Holes), 6 Row 30" Hex Shaft, ⅞" x 80" (No Holes), 6 Row 36"/38" Hex Shaft, ⅞" x 05" (No Holes), 8 Row 30" 6 GA80 Hanger Bearing, ⅞" Hex Bore 7 GA507 Sprocket, 9 Tooth 8 GD7 G08 G00 UBolt, 5" x 7" x ½"3 (Double Frame Planters) Lock Washer, ½" Hex Nut, ½"3 9 GD75 G08 G00 0 G33038 G3305 GR09 GA876 Rear Mount GD99 Spacer, ¼" O.D. x ½" Long 3 GA75 Sprocket W/Bearing, 8 Tooth G058 G068 G08 G00 5 G000 G09 G00 UBolt, 7" x 7" x ½"3 (Double Frame Planters) Lock Washer, ½" Hex Nut, ½"3 Chain, No. 0, 38 Pitch Including Connector Link (Single Frame Planters) Chain, No. 0, 5 Pitch Including Connector Link (Double Frame Planters) Connector Link, No. 0 Hex Head Cap Screw, ½"3 x ¼" Machine Bushing, ½", 7 Gauge Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 6 See Driveline, Row 30"/36"/38" on page P55 See Driveline, 6 Row 30"/36"/38" and 8 Row 30" on page P56 7 G0909 G08 G00 Hex Head Cap Screw, ½"3 x 9" (Single Frame Planters) Lock Washer, ½" Hex Nut, ½"3 8 G0968 Spring Pin, 5 3" x 7 6" 9 GR06 Bushing 0 GR05 Lock Collar GR3 Spring GR0 Pin 3 GR08 Compression Spring GR Shim 5 G096 External Inverted Snap Ring, ½" 6 GR Sprocket, 9 Tooth 7 G0535 Hex Socket Set Screw, ⅜"6 x ¾" 8 GR09 Knurled Collar 9 GR07 Drive Shaft A GA809 Clutch Sprocket Assembly, 9 Tooth (Items 89) B GK69 Lock Clamp Kit (Items 3 and ) C GK33 Clutch Sprocket Kit (Items 8, 9 and 6) Rev. 6/ P

48 Interplant SelfLeveling Hitch Extension M0880 (PT73d) P5 Rev. 6/

49 M0880 Interplant SelfLeveling Hitch Extension ITEM PART NO. QTY. DESCRIPTION GA987 Lockup W/Pin See Interplant Lift Cylinder on page P70 3 GA676 Pin G058 G389 G0 5 GA887 Hinge 6 GD79 Mount 7 G000 G09 G00 8 G065 G39 GD535 Hex Head Cap Screw, ½"3 x ¼" Flat Washer, ½" SAE Lock Nut, ½"3 Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 Hex Head Cap Screw, "8 x 3", Grade 8 Flat Washer, " SAE Bushing, ½" O.D. 9 See Hitch and Frame Assembly/Safety Chain on page P7 0 GA888 GA8656 G060 GD657 Mount GD607 Hose Clamp, ¾" x ½" x ½" 3 G035 G008 Hitch Extension W/Grease Fittings, Row 30", 6 Row 30" and 8 Row 30" Hitch Extension W/Grease Fittings, Row 36"/38" and 6 Row 36"/38" Grease Fitting, ¼"8 (Included W/GA888 or GA8656) Hex Head Cap Screw, ⅜"6 x ¾" Lock Nut, ⅜"6 GD66 Mounting Bracket 5 GA8676 Shield 6 G08 Hex Head Cap Screw, ⅝" x ¾" 7 G05 Cotter Pin, ⅛" x " 8 G396 Flat Washer, ¼" SAE 9 GD559 Pin, ¼" x ⅞" 0 G060 Cotter Pin, ¼" x " G000 G09 G Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Flat Washer, ⅜" SAE G000 Hex Head Cap Screw, ⅜"6 x " 3 G057 G389 G0 Carriage Bolt, ½"3 x ¼" Flat Washer, ½" SAE Lock Nut, ½"3 Rev. 6/ P6

50 Hitch and Frame Assembly/Safety Chain M0880 (A3595/PTj) ITEM PART NO. QTY. DESCRIPTION G000 Jack Assembly GR055 Repair Kit (Chain and Pin) G069 G057 3 GB056 Clevis GD70 Hose Holder 5 G038 G389 G08 G00 Hex Head Cap Screw, ¼"7 x 6" Lock Nut, ¼"7 Hex Head Cap Screw, ½"3 x 5" Flat Washer, ½" SAE Lock Washer, ½" Hex Nut, ½"3 6 See Interplant SelfLeveling Hitch Extension on page P5 7 GA99 Center Extension, L.H., Offset, " 8 GA98 Center Extension, R.H., Offset, " 9 G9566X ⅜" Transport Safety Chain Package, Includes: () 3/8" Safety Chain W/Hook, () Hex Head Cap Screw, () Lock Nut, () Washer, () Instruction Sheet 0 G0005 G007 Hex Head Cap Screw, ⅝" x ¾" Lock Nut, ⅝" P7 Rev. 6/5

51 M0880 Hitch and Frame Assembly/Safety Chain ITEM PART NO. QTY. DESCRIPTION G007 G389 G0 Hex Head Cap Screw, ½"3 x ½" Washer, ½" SAE Lock Nut, ½"3 3 GA7909 Jack Adjustment Bracket GD5888 Spring 5 GA8670 Hitch 6 G008 G008 7 GD5875 Hose Clamp 8 GA597 Spacer 9 G008 G008 0 G0993 G067 Hex Head Cap Screw, ⅜"6 x " Lock Nut, ⅜"6 Hex Head Cap Screw, ⅜"6 x " Lock Nut, ⅜"6 Hex Head Cap Screw, "8 x 8½", Grade 8 Hex Nut, "8, Grade 8 GD607 Hose Clamp, ¾" x ½" x ½" A80 A80 A803 A80 A805 3 GA9007 GD607 G008 G008 G0903 Cap Plug 5 G0895 G0 6 GD3 G030 G Double Frame Toolbar, 7" x 5" x 0", Row 30" (NonStock Item) Double Frame Toolbar, 7" x 5" x ", Row 36"/38" (NonStock Item) Double Frame Toolbar, 7" x 5" x 80", 6 Row 30" (NonStock Item) Double Frame Toolbar, 7" x 5" x 0", 6 Row 36"/38" (NonStock Item) Double Frame Toolbar, 7" x 5" x 0", 8 Row 30" (NonStock Item) Hitch Extension W/Hose Clamps and Hardware Hose Clamp, ¾" x ½" x ½" (Included W/GA9007) Hex Head Cap Screw, ⅜"6 x " (Included W/GA9007) Lock Nut, ⅜"6 (Included W/GA9007) Hex Head Cap Screw, ¾"0 x 8½" Lock Nut, ¾"0 UBolt, 5" x 7" x ⅝" Lock Washer, ⅝" Hex Nut, ⅝" 7 GA65 Straight Extension 8 G006 G387 G008 Hex Head Cap Screw, ⅜"6 x 3½" Flat Washer, ⅜" SAE Lock Nut, ⅜"6 9 G085 Flanged Cap Screw, Point, " x 3" 30 GA97 Hitch/Center Extension, L.H., Straight, " 3 GA96 Hitch/Center Extension, R.H., Straight, " 3 GA939 End Extension, L.H. 33 GD G030 G00 3 A806 A807 A808 A809 A GD9 Hitch Clamp 36 GA938 End Extension, R.H. UBolt, 7" x 7" x ⅝" Lock Washer, ⅝" Hex Nut, ⅝" Toolbar, 7" x 7" x 0", Row 30" (NonStock Item) Toolbar, 7" x 7" x ", Row 36"/38" (NonStock Item) Toolbar, 7" x 7" x 80", 6 Row 30" (NonStock Item) Toolbar, 7" x 7" x 0", 6 Row 36"/38" (NonStock Item) Toolbar, 7" x 7" x 0", 8 Row 30" (NonStock Item) Rev. /6 P8

52 Transport and Ground Drive Wheel Assembly (Prior to 0 Production) M0880 (PTj) P9 Rev. 6/

53 M0880 Transport and Ground Drive Wheel Assembly (Prior to 0 Production) ITEM PART NO. QTY. (Per Assy.) G0009 G030 G00 DESCRIPTION Hex Head Cap Screw, ⅝" x ½" Lock Washer, ⅝" Hex Nut, ⅝" GA5 Wheel Tower Clamp 3 G0008 G39 G030 G00 Hex Head Cap Screw, ⅝" x " Flat Washer, ⅝" SAE Lock Washer, ⅝" Hex Nut, ⅝" See Master Lift Cylinder on page P68 See Transport and Ground Drive Wheel Assembly (0 Production and on) on page P5 See Lift Assist Cylinder, 6 Row 30"/36"/38" and 8 Row 30" on page P70 5 GD58 G060 Pin, ¼" x 5⅝" Cotter Pin, ¼" x " 6 GA7376 Scraper Mount 7 GD53 Scraper 8 G08 Hex Jam Nut, ½", Grade 9 GA0895 Bearing 0 GA8 GR03 Hub W/Cups, 6 Bolt Cup (Included W/GA8) GR070 6 Lug Bolt, 9/6"8 GA558 GD90 Spindle W/Round External Retaining Ring, 9½" Round External Retaining Ring (Included W/GA558) 3 GD30 Tire, 7.50" x 0", 8 Ply, Tubeless W/O Center Rib (Specify Brand*) GA3 Rim, 5.50" x 0" 5 GA73 Valve Stem 6 G006 G03 G005 7 G006 G03 G005 8 G0636 G007 9 G396 Flat Washer, ¼" 0 G059 Washer, ⅞" G058 G0 Hex Head Cap Screw, ¾"0 x ½" Lock Washer, ¾" Hex Nut, ¾"0 Hex Head Cap Screw, ¾"0 x " Lock Washer, ¾" Hex Nut, ¾"0 Carriage Bolt, ½"3 x ½" Serrated Flange Nut, ½"3 Hex Head Cap Screw, ½"3 x ¼" Lock Nut, ½"3 GA5 Pin, ⅛" 3 GA8839 Arm GD695 Pin, ¼" x 3¼" 5 G060 Spring Pin, ⅜" x " 6 GA9877 G060 Clamp W/Grease Fittings Grease Fitting, ¼"8 (Included W/GA9877) A GA7 Hub and Spindle Assembly (Items 80 and ) B GA709 Scraper Assembly (Items 6, 7, 6 and 8) C GA Tire and Rim Assembly (Items 35) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Rev. 6/ P50

54 Transport and Ground Drive Wheel Assembly (0 Production and on) M0880 (IP33) P5 Rev. 6/

55 M0880 Transport and Ground Drive Wheel Assembly (0 Production and on) ITEM PART NO. QTY. DESCRIPTION (Per Assy.) GA39 Wheel Module GD06 Pin, ¼" x 3" 3 G00 Retaining Ring, ¼" GA38 Lower Half Clamp 5 G Hex Head Cap Screw, ⅝" x ¼" 6 G39 6 Flat Washer, ⅝" SAE 7 G030 6 Lock Washer, ⅝" 8 G00 6 Hex Nut, ⅝" 9 GA5 Wheel Tower Clamp 0 See Master Lift Cylinder on page P68 See Transport and Ground Drive Wheel Assembly (0 Production and on) on page P5 See Contact Wheel and Arm Assembly on page P53 GA5 Pin, ⅛" G0053 G0 Hex Head Cap Screw, ½"3 x ½" Lock Nut, ½"3 3 G059 Washer, ⅞" G060 Cotter Pin, ¼" x " 5 GD58 Pin, ¼" x 5⅝" 6 GD058 Slotted Scrapper 7 G0636 Carriage Bolt, ½"3 x ½" 8 G007 Serrated Flange Nut, ½"3 9 GD056 Short Scraper Arm 0 G006 3 Hex Head Cap Screw, ¾"0 x " G03 Lock Washer, ¾" G3 Serrated Flange Nut, ¾"0 3 GR070 6 Lug Bolt, 9/6"8 GA3 Rim, 5.50" x 0" 5 GA73 Valve Stem 6 GD30 Tire, 7.50" x 0", 8 Ply, Tubeless W/O Center Rib (Specify Brand*) 7 GA376 GD90 GD58 Spindle Assembly Round External Retaining Ring (Included W/GA376) Spindle (Included W/GA376) 8 GA0895 Bearing 9 GR03 Cup 30 GB060 Hub, 6 Bolt 3 G08 Hex Jam Nut, ½", Grade A GA8 Hub W/Cups, 6 Bolt (Items 9 and 30) B GA Tire and Rim Assembly (Items 6) (Specify Brand*) * Specific brand requests will be supplied only as available from current Kinze Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Rev. 6/ P5

56 Contact Wheel and Arm Assembly M0880 (PTp) ITEM PART NO. QTY. (Per Assy.) GA579 G0860 G0870 DESCRIPTION Cover Retaining Ring, ⅜" Clevis Pin, ⅜" x " GD5857 Spring 3 GA3790 GD5789 GD5790 Slip Joint Assembly Hinge W/Pins, Female (Included W/GA3790) Hinge W/Pins, Male (Included W/GA3790) G006 G06 Hex Head Cap Screw, ¼"0 x " Serrated Flange Nut, ¼"0 5 GA735 Tool Box Insert 6 G0303 G386 G060 7 GD587 Cover Carriage Bolt, 5 6"8 x " Washer, 5 6" SAE (As Required) Serrated Flange Nut, 5 6"8 P53 Rev. /

57 M0880 Contact Wheel and Arm Assembly ITEM PART NO. QTY. (Per Assy.) 8 GA557 GA558 9 G0306 G387 G008 DESCRIPTION Idler Arm, L.H. Idler Arm, R.H. Carriage Bolt, ⅜"6 x " Flat Washer, ⅜" SAE (As Required) Lock Nut, ⅜"6 0 GD06 Sleeve, 3 6" Long GD76 Sprocket, Tooth GD5860 Bar 3 G3000 Flangette G0003 Bearing, ⅞" Hex Bore, Spherical 5 G000 G Hex Head Cap Screw, ⅜"6 x ¼" Serrated Flange Nut, ⅜"6 6 See Transport and Ground Drive Wheel Assembly (Prior to 0 Production) on page P9 7 G3303 GR09 Chain, No. 0, 3 Pitch Including Connector Link Connector Link, No. 0 8 G060 Spring Pin, ¼" x ½" 9 GA505 Sprocket, 5 Tooth 0 GD Hex Shaft, ⅞" x 0½" ( Holes) G033 6 Machine Bushing, ", 0 Gauge A7370 G0303 G060 GA986 G0055 G Arm W/Flanged Bearings and Hardware (NonStock Item) (Sub GK53) Carriage Bolt, 5 6"8 x " (Included W/A7370) Serrated Flange Nut, 5 6"8 (Included W/A7370) Flanged Bearing, ⅞" Hex Bore (Included W/A7370) Hex Head Cap Screw, ⅝" x ¼" (Stop Bolt) (Included W/A7370) Lock Nut, ⅝" (Included W/A7370) 3 G0890 Hex Head Adjusting Bolt, ½"3 x ", Grade GA5090 GD5753 GD575 Tire and Rim Assembly (Specify Brand*) Tire,.0" x 6" (Specify Brand*) (Included W/GA5090) Inner Tube (Included W/GA5090) 5 GA9870 G087 Lockup W/Pin Detent Pin, ½" x 3½" Grip (Included W/GA9870) 6 GD79 Mount 7 G050 Hex Jam Nut, ½"3, Grade 8 GB08 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long 9 GA068 Spring W/Plug 30 G0005 G035 G39 G007 3 G000 G09 G0370 GD Hex Head Cap Screw, ⅝" x ¾" Machine Bushing, ⅞", Gauge Flat Washer, ⅝" SAE Lock Nut, ⅝" Hex Head Cap Screw, ⅜"6 x ¼" Lock Washer, ⅜" Machine Bushing, ⅜", Gauge Special Nut, ⅜"6 3 GA58 Mount 33 GD558 Lynch Pin, ¼" 3 G006 G385 Hex Head Cap Screw, ¼"0 x " Flat Washer, ¼" SAE G07 Lock Washer, ¼" G003 Hex Nut, ¼"0 A GK53 Contact Wheel Arm Replacement Kit, (Items 8, 0,, 3 and 7) * Specific brand requests will be supplied only as available from current Kinze Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Different brand tires may have different diameters. Change in tire brand may affect rates. Field checks are recommended after any change in contact tires. Rev. 3/7 P5

58 Driveline, Row 30"/36"/38" M0880 PTD033(PT5b) Row 36"/38" Row 30" ITEM PART NO. QTY. DESCRIPTION GA5 Sprocket, 30 Tooth GD789 GD GD596 Coupler, ¼" GD58850 GD Hex Shaft, ⅞" x 5¼" (3 Holes), Row 30" Hex Shaft, ⅞" x 6" ( Holes), Row 36"/38" Hex Shaft, ⅞" x 9" (6 Holes), Row 30" Hex Shaft, ⅞" x " (6 Holes), Row 36"/38" 5 See Seed Rate Transmission Assembly on page P57 6 G03 Square Head Set Screw, 5 6"8 x ¾" 7 GD0909 GD093 Hex Shaft, ⅞" x 09" (No Holes), Row 30" Hex Shaft, ⅞" x 3" (No Holes), Row 36"/38" 8 G060 Cotter Pin, ¼" x " 9 G033 Machine Bushing, ", 0 Gauge (As Required) 0 G060 Spring Pin, ¼" x ½" G030 G093 Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration GD05 Lock Clamp 3 G033 Machine Bushing, ", 0 Gauge GB087 Coupler A GK69 Lock Clamp Kit (Items and ) P55 Rev. 6/

59 M0880 Driveline, 6 Row 30"/36"/38" and 8 Row 30" PTD06/PTD03(PT6/PT7c) ITEM PART NO. QTY. DESCRIPTION G060 Spring Pin, ¼" x ½" GD5880 GD5960 Hex Shaft, ⅞" x 36" (3 Holes), 6 Row 30" and 8 Row 30" Hex Shaft, ⅞" x 50" (6 Holes), 6 Row 36"/38" 3 GD596 Coupler, ¼" GD58850 Hex Shaft, ⅞" x 30" (6 Holes), 6 Row 30"/36"/38" and 8 Row 30" 5 See Seed Rate Transmission Assembly on page P57 6 G03 Square Head Set Screw, 5 6"8 x ¾" 7 GD0970 GD090 GD0930 Hex Shaft, ⅞" x 70" (No Holes), 6 Row 30" Hex Shaft, ⅞" x 0" (No Holes), 6 Row 36"/38" Hex Shaft, ⅞" x 30" (No Holes), 8 Row 30" 8 G060 Cotter Pin, ¼" x " 9 G033 Machine Bushing, ", 0 Gauge (As Required) 0 GA565 Sprocket, 30 Tooth G030 External Retaining Ring, ¼" GD55 LPin 3 GA0378 Block and Hub Assembly G053 Cotter Pin, 3 6" x " 5 GD56 Spring 6 G030 G093 Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration 7 GD05 Lock Clamp 8 G033 Machine Bushing, ", 0 Gauge 9 GB087 Coupler A GA56 Ratchet/Sprocket Assembly, Includes: () GD56, () G06, B GK69 Lock Clamp Kit (Items 6 and 7) Rev. 6/ P56

60 Seed Rate Transmission Assembly M0880 (PT8k/PT8mm) Style A Style B If replacing Style A (GD5830) Must Order: GD306 X GD306 If replacing Style A (GD630) Must Order: GD306 X GD306 X NOTE: Style A contains holes and Style B contains a slot. P57 Rev. /6

61 M0880 Seed Rate Transmission Assembly ITEM PART NO. QTY. DESCRIPTION GD57 Spacer, " x " GA75 Sprocket W/Bearing, 8 Tooth 3 G0033 G08 G08 G00 G0053 G08 G00 5 GD587 Cover 6 GD350 Arm 7 G0053 G08 G08 G00 Hex Head Cap Screw, ½"3 x 3½" Machine Bushing, ½", Gauge (As Required) Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ½"3 x ½" Machine Bushing, ½", Gauge (As Required) Lock Washer, ½" Hex Nut, ½"3 8 GD8870 Sleeve, ½" I.D. x ⅝" Long 9 GA505 Sprocket, 5 Tooth 0 G033 Machine Bushing, ", 0 Gauge G0303 G03 G006 G0037 G08 G00 3 G077 G030 G00 G3309 G33000 GR GD3 Handle 6 G078 Vinyl Cap 7 GD5857 Spring 8 GA569 GA56 GA56 GD655 G060 9 GD77 Shear Coupler 0 G08 G055 GA506 GA507 GA508 GA509 GA50 GA5 GA5 GA53 3 Carriage Bolt, 5 6"8 x " Lock Washer, 5 6" Hex Nut, 5 6"8 Hex Head Cap Screw, ½"3 x ¼" Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ⅝" x 9½" Lock Washer, ⅝" Hex Nut, ⅝" Chain, No. 0, 9 Pitch Including Connector Link Chain, No. 0, 00 Pitch Including Connector Link, Used With Half Rate ( To ) Drive Reduction Connector Link, No. 0 Transmission Plate W/Bearings, Grease Fittings and Retaining Rings Bearing, ⅞" Hex Bore, Cylindrical (Included W/GA569) Special Bearing, ⅞" Hex Bore x.6" (Included W/GA569) Ring (Included W/GA569) Grease Fitting, ¼"8 (Included W/GA569) Clevis Pin, 3/6" x " Cotter Pin, /6" x ½" Sprocket, 7 Tooth Sprocket, 9 Tooth Sprocket, 3 Tooth Sprocket, Tooth Sprocket, 5 Tooth Sprocket, 6 Tooth Sprocket, 7 Tooth Sprocket, 8 Tooth GD78 Shaft, ⅞" x 7" Rev. /6 P58

62 Seed Rate Transmission Assembly M0880 ITEM PART NO. QTY. DESCRIPTION 3 G00 G07 G53 Hex Socket Button Head Cap Screw, ¼"0 x ½", Grade 8 Lock Washer, ¼" Fender Washer, ¼" G096 External Inverted Snap Ring, ½" 5 GA7336 GD76 GD06 G387 G09 G007 6 G33080 GR09 Idler W/BoltOn Sprockets Sprocket, Tooth (Included W/GA7336) Sleeve, 3 6" Long (Included W/GA7336) Flat Washer, ⅜" SAE (Included W/GA7336) Lock Washer, ⅜" (Included W/GA7336) Hex Head Cap Screw, ⅜"6 x ¾" (Included W/GA7336) Chain, No. 0, 80 Pitch Including Connector Link Connector Link, No. 0 7 G075 3 External Inverted Snap Ring, ⅞" 8 GD558 3 Lynch Pin, ¼" 9 G060 5 Spring Pin, ¼" x ½" 30 GA56 Sprocket Storage Rod 3 G007 G057 G0 3 GD5835 Shaft, ⅞" x 7" 33 G0870 G G000 G09 G387 GD5538 GD GA506 GA50 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½", Internal/External Lock Nut, ½"3 Clevis Pin, ⅜" x " Retaining Ring, ⅜" Hex Head Cap Screw, ⅜"6 x ¼" Lock Washer, ⅜" Flat Washer, ⅜" SAE Spacer, ⅜" I.D. x ⅞" O.D., 7 Gauge Special Nut, ⅜"6 Sprocket, 7 Tooth, Standard Drive Sprocket, 3 Tooth, Half Rate ( To ) Drive Reduction 36 G060 Cotter Pin, ¼" x " 37 G0003 Bearing, ⅞" Hex Bore, Spherical 38 G3000 Flangette 39 GD5830 GD306 Angle Support, R.H. (Style A) (Replaced with GD306) Angle Support, R.H. (Style B) 0 GD58 Plate, R.H. GD933 Release Collar, R.H. GD7 Tightener Shaft, ⅞ 3 GD3 Sleeve, ¼" GD3 Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 5 G007 G08 G00 6 G0038 G08 G08 G00 7 GB059 Spacer, " 8 GA78 Bearing, ⅞" Hex Bore 9 GD630 GD306 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ½"3 x 3" Machine Bushing, ½", Gauge (As Required) Lock Washer, ½" Hex Nut, ½"3 Reverser Plate (Style A) (Replaced With GD306) Reverser Plate (Style B) A GK378 Wrap Spring Wrench Replacement Kit, Blue Collar, R.H. (Items 5, 6, 3,, 7 and ) P59 Rev. /6

63 This page left blank intentionally.

64 Row Marker Assembly, Conventional Row 30"/36"/ 38" and 6 Row 30" M0880 MKR00(MKRa) P6 Rev. 6/

65 M0880 Row Marker Assembly, Conventional Row 30"/36"/ 38" and 6 Row 30" ITEM PART NO. QTY. (Per Assy.) GD0530 GD05306 GD05307 GD7 G08 G00 3 GA575 GA58 GA583 G060 GD06 G0670 G087 5 GA577 GA578 G060 6 GD038 G060 7 G033 G009 DESCRIPTION 8 GD589 Hose Clamp, ⅝" x ½" x ½" 9 G0008 G030 Extension Tube, 0", Row 30" Extension Tube, 30", Row 30" W/Optional Interplant Package Extension Tube, 5", Row 36"/38" and 6 Row 30" UBolt, " x " x ½"3 Lock Washer, ½" Hex Nut, ½"3 Arm W/Grease Fittings, 3½", Row 30" Arm W/Grease Fittings, ½", Row 36"/38" Arm W/Grease Fittings, 58½", 6 Row 30" Grease Fitting, ¼"8 (Included W/GA575, GA58, or GA583) Safety Lockup Pin Hair Pin Clip, No. 3 Spring Pin, 5 3" x " Mount W/Grease Fittings, Row 30" Mount W/Grease Fittings, Row 36"/38" and 6 Row 30" Grease Fitting, ¼"8 (Included W/GA577 or GA578) Pin, 3½" Cotter Pin, ¼" x " Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 Hex Head Cap Screw, ⅝" x " Lock Washer, ⅝" 0 See Row Marker Cylinder, Row 30"/36"/38" and 6 Row 30" on page P7 GR096 GR093 Pin, " x 3⅜" Hair Pin Clip Rev. 6/ P6

66 Row Marker Assembly, TwoFold Low Profile 6 Row 36"/38" and 8 Row 30" M0880 MKR006/MKR009(MKRf/A59) P63 Rev. 6/

67 M0880 Row Marker Assembly, TwoFold Low Profile 6 Row 36"/38" and 8 Row 30" ITEM PART NO. QTY. DESCRIPTION (Per Assy.) GD05303 Extension Tube, 50", 6 Row 36"/38" and 8 Row 30" G396 Flat Washer, ¼" SAE 3 GA573 G06 Arm W/Grease Fittings, First Stage Grease Fitting, ⅛" NPT (Included W/GA573) See Row Marker Cylinder, 6 Row 36"/38" and 8 Row 30" on page P7 5 GD5386 G060 Pin, ¼" x 7⅝" Cotter Pin, ¼" x " 6 GD5875 Hose Clamp 7 G033 G009 8 GD065 G060 Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 Pin, ¼" x 9½" Cotter Pin, ¼" x " 9 G0879 Flanged Point Bolt, ⅝" x ", Special Hardened 0 GA530 Mount GD3 G060 GD6 G060 3 GD7 G08 G00 GA590 GA588 Pin, ¼" x ¼" Cotter Pin, ¼" x " Pin, ¼" x 8¼" Cotter Pin, ¼" x " UBolt, " x " x ½"3 Lock Washer, ½" Hex Nut, ½"3 Arm, Second Stage, 35", 6 Row 36"/38" Arm, Second Stage, 6", 8 Row 30" 5 GD075 Sleeve, " (If Applicable) 6 GA766 G060 G060 7 GA59 Arm, First Stage 8 GA767 G060 G060 Pin W/Grease Fitting, ¼" x 3 6" Grease Fitting, ¼"8 (Included W/GA766) Cotter Pin, ¼" x " (Included W/GA766) Pin W/Grease Fitting, ¼" x 9½" Grease Fitting, ¼"8 (Included W/GA767) Cotter Pin, ¼" x " (Included W/GA767) Rev. 6/ P6

68 Row Marker Spindle/Hub/Blade M0880 IP035aa P65 Rev. 6/

69 M0880 Row Marker Spindle/Hub/Blade ITEM PART NO. QTY. (Per Assy.) G08 G068 G08 G00 GD076 GD083 3 G005 G068 G08 G00 DESCRIPTION Carrriage Bolt, ½"3 x 3½" Machine Bushing, ½", 7 Gauge Lock Washer, ½" Hex Nut, ½"3 Disc Blade, Solid, 6" (Shown) Disc Blade, Notched, 6" (Optional) Hex Head Cap Screw, ½"3 x ½" Machine Bushing, ½", 7 Gauge Lock Washer, ½" Hex Nut, ½"3 GA067 Hub W/Cups, Bolt (Includes Items 6 and 7) 5 G39 Flat Washer, ⅝" SAE 6 GR05 Outer Cup 7 GD50 Grease Seal 8 G00 Lock Nut, ¼"0, Grade B 9 GA057 Bearing 0 G8 Hex Socket Head Cap Screw, ¼" x ½" GB055 Hub Shield GD597 Retainer 3 GD080 Dust Cap G07 G08 Hex Head Cap Screw, ½"0 x " Lock Washer, ½" 5 G05 Cotter Pin, 5 3" x " 6 G075 Slotted Hex Nut, ⅝"8 7 GR050 Inner Cup 8 GA05 Bearing 9 GA55 Spindle A GA379 Marker Hub Assembly, (Items 7, 9, and 9) Rev. 6/ P66

70 Water Tank Assembly M0880 A ITEM PART NO. QTY. DESCRIPTION GD3073 Gallon Water Tank W/Lid G386 Flat Washer, 5/6" SAE 3 G008 Hex Head Cap Screw, 5/6"8 x 5/8" GA00 Water Tank Mount 5 GD30 Water Tank Mount Brackets 6 G70050 Decal, Notice 7 G077 Reducing Nipple, /" x " 8 G7 " NPT 90 Elbow 9 GD307 " NPTF Flush Valve 0 G0686 Hex Head Cap Screw, 3/8"6 x 8" G008 Lock Nut, 3/8"6 P67 Rev. 6/5

71 M0880 Master Lift Cylinder (IP53) ITEM PART NO. QTY. DESCRIPTION A95 Barrel GD735 Nylon Lock Nut, ", Grade 8 3 *D056 Wear Ring *D80 TSeal 5 GA Piston 6 *D969 ORing, No. 5 7 *D3 ORing, No *D3 BU Ring 9 *D5 UCup 0 GD507 Gland *D0 Wiper GD0 Ring 3 GA06 Rod G60808 GR037 Plug W/ORing, 3/"6 ORing ORing A GA Cylinder Complete, 3½" x 8" (Part Number Stamped On Barrel) B GR8 Seal Kit, Includes: () Wiper, (3) ORings, () BU Ring, () TSeal, () Wear Ring, () UCup *Item is part of seal kit, item can not be purchased individaully. Rev. 6/5 P68

72 Slave Lift Cylinder M0880 (IP5) ITEM PART NO. QTY. DESCRIPTION A7538 Barrel GD735 Nylon Lock Nut, ", Grade 8 3 *D038 Wear Ring *D79 TSeal 5 GA05 Piston 6 *D969 ORing, No. 5 7 *D7 ORing, No *D8 BackUp Ring 9 *D5 UCup 0 GD505 Gland *D0 Wiper GD0 Ring 3 GA06 Rod G60808 GR037 Plug W/ORing, ¾"6 ORing ORing A GA0 Cylinder Complete, 3 ¼" x 8" (Part Number Stamped On Barrel) B GR5 Seal Kit, Includes: () Wiper, () UCup, (3) ORings, () BU Ring, () TSeal, () Wear Ring *Item is part of seal kit, item can not be purchased individaully. P69 Rev. 6/5

73 M0880 Lift Assist Cylinder, 6 Row 30"/36"/38" and 8 Row 30" (IP55) ITEM PART NO. QTY. DESCRIPTION A887 Barrel GD73 Nylon Lock Nut, 7/8", Grade 8 3 *D75 TSeal, ½" GD300 Piston 5 *D30399 ORing, No. 9 6 *D ORing, No *D3 BU Ring 8 *D5 UCup 9 GD985 Gland 0 *D0 Wiper GD0 Ring GA85 Rod 3 G60808 GR037 Plug W/ORing, ¾"6 ORing ORing A GA8 Cylinder Complete, ½" x 8" (Part Number Stamped On Barrel) B GR7 Seal Kit, Includes: () Wiper, (3) ORings, () BU Ring, () TSeal, () UCup *Item is part of seal kit, item can not be purchased individaully. Rev. 6/5 P70

74 Row Marker Cylinder, Row 30"/36"/38" and 6 Row 30" M0880 (IP58) ITEM PART NO. QTY. DESCRIPTION A8775 Barrel GD733 Nylon Lock Nut, ¾"6, Grade 8 3 *D77 TSeal GD9689 Piston 5 *D969 ORing, No. 6 *D35 ORing, No *D36 BackUp Ring 8 *D56 UCup 9 GD50 Gland 0 *D33 Wiper Rod GD0 Ring GA68 Rod 3 G60808 GR037 Plug W/ORing, ¾"6 ORing ORing A GA67 Cylinder Complete, " x 8" (Part Number Stamped On Barrel) B GR9 Seal Kit, Includes: () Wiper, () UCup, (3) ORings, () BU Ring, () TSeal, () Instrcution Sheet *Item is part of seal kit, item can not be purchased individaully. P7 Rev. 6/5

75 M0880 Row Marker Cylinder, 6 Row 36"/38" and 8 Row 30" (IP57) 3 ¾"6 ORing Ports ITEM PART NO. QTY. DESCRIPTION A9 Barrel GD733 Nylon Lock Nut, 3/"6, Grade 8 3 *D969 ORing, No. *D77 TSeal 5 GD9689 Piston 6 *D35 ORing, No *D36 BackUp Ring 8 *D56 UCup 9 GD50 Gland 0 *D33 Wiper Rod GD0 Ring GA59 Rod 3 G60808 GR037 Plug W/ORing, ¾"6 ORing ORing A GA58 Cylinder Complete, " x 0 6" (Part Number Stamped On Barrel) B GR9 Seal Kit, Includes: () Wiper, () UCup, (3) ORings, () BU Ring, () TSeal, () Instrcution Sheet *Item is part of seal kit, item can not be purchased individaully. Rev. 6/5 P7

76 Interplant Lift Cylinder M0880 (CYL33c) ITEM PART NO. QTY. DESCRIPTION GA830 GR0 G0939 G00 Clevis W/Bushings, Hex Head Cap Screw and Hex Nut Bushing Hex Head Cap Screw, ⅜"6 x ¼" Hex Nut, ⅜"6 GD53 Rod 3 GD995 Gland GA89 GR69 5 GD735 Nylon Lock Nut, ", Grade 8 6 A893 Barrel 7 G0957 Steel Shim Piston W/Rephasing Valve Rephasing Valve Replacement Kit (Includes: Set Screw, Guide, Springs and Ball) A GA8897 Cylinder Complete, ¼" x " (Part Number Stamped On Barrel) B GR53 Seal Kit, Includes: () Wiper, () ORings, () BU Ring, () UCup, () Seal, () Expander, () Cast Iron Ring P73 Rev. 6/

77 This page left blank intentionally.

78 Row Marker Sequencing/Flow Control Valve M0880 VVB05/PHS035(PTa) Raise Port * Lower Port P75 Rev. 6/

79 M0880 Row Marker Sequencing/Flow Control Valve ITEM PART NO. QTY. DESCRIPTION Valve Body (NonStock Item) GR07 GR037 Hex Socket Plug W/ORing ORing 3 GR " Check Ball GR033 Detent Spring 5 GR03 GR05 6 *G60006 GR05 7 GR03 GR035 8 GR036 Spring 9 GR03 ¼" Steel Ball 0 Spool (NonStock Item) GR0 Teflon BU Ring GR0 Adjustment Screw 3 GR00 ORing GR06 Compression Spring 5 GR039 Spring Pin 6 GR038 Needle 7 GR08 Hex Jam Nut, ½"0 8 G000 G387 G09 9 G000 G09 0 GD03 Mounting Angle G000 G387 G09 G00 Port Adapter W/ORing ORing Connector W/ORing, 9 6"8 Male 37 JIC To 9 6"8 ORing ORing Hex Socket Plug W/ORing ORing Hex Head Cap Screw, ⅜"6 x " Washer, ⅜" SAE Lock Washer, ⅜" Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Head Cap Screw, ⅜"6 x " Washer, ⅜" SAE Lock Washer, ⅜" Hex Nut, ⅜"6 GD0 Valve Mounting Angle A GA555 Valve Assembly Complete (Items 7) B GA557 Flow Control Portion Only (Items 7) *Not used on sizes with ⅜" hoses. Rev. 6/ P76

80 Hydraulic System, Row 30"/36"/38" Conventional Row Marker M0880 (PTd/PTe/PT3d) Single Valve Marker Interplant Hitch Extension Hoses Double Frame Extension Hoses/ Hitch Extension Hoses Slave Double Frame Extension Hoses/ Hitch Extension Hoses Master Marker Dual Valve Marker Slave Interplant Hitch Extension Hoses Double Frame Extension Hoses/ Hitch Extension Hoses Master Marker P77 Rev. 6/

81 M0880 Hydraulic System, Row 30"/36"/38" Conventional Row Marker ITEM PART NO. QTY. DESCRIPTION See Master Lift Cylinder on page P68 G05 Machine Bushing, ¾", Gauge 3 G60008 GR037 *A08 *A00 5 *A33 *A336 6 *A00 *A0 Connector W/ORing, ¾"6 Male JIC To ORing ORing Hose Assembly, ⅜" x 0", Row 30" Hose Assembly, ⅜" x 8", Row 36"/38" Hose Assembly, ⅜" x 8", Row 30" Hose Assembly, ⅜" x 00", Row 36"/38" Hose Assembly, ⅜" x 8", Row 30" Hose Assembly, ⅜" x 56", Row 36"/38" 7 See Slave Lift Cylinder on page P69 8 G7008 Bulkhead Elbow, 90, ¾"6 Male JIC 9 G30608 Lock Nut, ¾"6 0 *A076 Hose Assembly, ⅜" x 30" *A335 Hose Assembly, ⅜" x 00" G Tee, ¾"6 Male JIC To 9 6"8 JIC 3 G Swivel Elbow, 90, 9 6"8 Male JIC To Female *A38 Hose Assembly, ¼" x 9" 5 G65006 Swivel Elbow, 5, 9 6"8 Male JIC To Female 6 See Row Marker Sequencing/Flow Control Valve on page P75 7 G68008 GR037 Elbow W/ORing, 90, ¾"6 Male JIC To ORing ORing 8 *A3 Hose Assembly, ⅜" x 66", W/Interplant Package 9 *A00 Hose Assembly, ⅜" x 8", W/Interplant Package 0 See Row Marker Cylinder, Row 30"/36"/38" and 6 Row 30" on page P7 G GR037 *A0 *A7 3 *A70 *A50 Elbow W/ORing, 90, 9 6"8 Male JIC To ¾"6 ORing ORing Hose Assembly, ¼" x 95", Row 30" Hose Assembly, ¼" x 08", Row 36"/38" Hose Assembly, ¼" x 90", Row 30" Hose Assembly, ¼" x 03", Row 36"/38" *A076 Hose Assembly, ⅜" x 30", W/Interplant Package 5 *A8 *A77 6 *A3 *A37 Hose Assembly, ¼" x 30", W/Double Frame Package Hose Assembly, ¼" x ", W/Hitch Extensions Hose Assembly, ⅜" x 30", W/Double Frame Package Hose Assembly, ⅜" x ", W/Hitch Extensions 7 G0308 Union, ¾"6 Male JIC 8 *A73 Hose Assembly, ¼" x 00" 9 See Interplant Lift Cylinder on page P70 30 *A79 Hose Assembly, ¼" x 56", W/Interplant Package 3 *A8 Hose Assembly, ¼" x 30", W/Double Frame Package 3 *A53 Hose Assembly, ¼" x 56", W/Interplant Package 33 G0306 Union, 9 6"8 Male JIC, W/Interplant Package 3 G0308 Union, ¾"6 Male JIC, W/Interplant Package * Hydraulic hose is not stocked by Kinze Repair Parts. Rev. 6/ P78

82 Hydraulic System, 6 Row 30" Conventional Row Marker M0880 Single Valve Marker Slave Assist Assist Marker Interplant Hitch Extension Hoses Double Frame Extension Hoses/ Hitch Extension Hoses Master Dual Valve Slave Marker Assist Assist Marker Interplant Hitch Extension Hoses Double Frame Extension Hoses/ Hitch Extension Hoses Master P79 Rev. 6/

83 M0880 Hydraulic System, 6 Row 30" Conventional Row Marker ITEM PART NO. QTY. DESCRIPTION See Master Lift Cylinder on page P68 G05 Machine Bushing, ¾", Gauge 3 G60008 GR037 8 Connector W/ORing, ¾"6 Male JIC To ORing ORing *A08 Hose Assembly, ⅜" x 0" 5 *A35 Hose Assembly, ⅜" x 6" 6 See Lift Assist Cylinder, 6 Row 30"/36"/38" and 8 Row 30" on page P70 7 *A000 Hose Assembly, ⅜" x 5" 8 *A39 Hose Assembly, ⅜" x 36" 9 G60308 Tee, ¾"6 Male JIC 0 *A086 Hose Assembly, ⅜" x 8" *A09 Hose Assembly, ⅜" x " See Slave Lift Cylinder on page P69 3 See Row Marker Cylinder, Row 30"/36"/38" and 6 Row 30" on page P7 G GR037 Elbow W/ORing, 90, 9 6"8 Male JIC To ¾"6 ORing ORing 5 G70308 Bulkhead Tee, ¾"6 Male JIC 6 G30608 Lock Nut, ¾"6 7 *A076 Hose Assembly, ⅜" x 30" 8 *A335 Hose Assembly, ⅜" x 00" 9 G Tee, ¾"6 Male JIC To 9 6"8 JIC 0 G Swivel Elbow, 90, 9 6"8 Male JIC To Female *A38 Hose Assembly, ¼" x 9" G65006 Swivel Elbow, 5, 9 6"8 Male JIC To Female 3 See Row Marker Sequencing/Flow Control Valve on page P75 G0308 Union, ¾"6 Male JIC 5 G66008 Swivel Tee, ¾"6 JIC 6 *A308 Hose Assembly, ⅜" x 0", W/Interplant Package 7 *A68 Hose Assembly, ¼" x 0" 8 *A05 Hose Assembly, ¼" x 5" 9 *A8 *A77 30 *A3 *A37 Hose Assembly, ¼" x 30", W/Double Frame Package Hose Assembly, ¼" x ", W/Hitch Extensions Hose Assembly, ⅜" x 30", W/Double Frame Package Hose Assembly, ⅜" x ", W/Hitch Extensions 3 *A73 Hose Assembly, ¼" x 00" 3 See Interplant Lift Cylinder on page P68 33 G68008 GR037 Elbow W/ORing, 90, ¾"6 Male JIC To ORing ORing 3 *A076 Hose Assembly, ⅜" x 30", W/Interplant Package 35 *A350 Hose Assembly, ⅜" x 56", W/Interplant Package 36 *A79 Hose Assembly, ¼" x 56", W/Interplant Package 37 *A3 Hose Assembly, ⅜" x 30", W/Interplant Package (Double Frame Only) 38 *A375 Hose Assembly, ⅜" x 38" * Hydraulic hose is not stocked by Kinze Repair Parts. Rev. 6/ P80

84 Hydraulic System, 6 Row 36"/38" and 8 Row 30" TwoFold Low Profile Row Marker M0880 Single Valve Marker Slave Assist Interplant Hitch Extension Hoses Assist Marker Double Frame Extension Hoses/ Hitch Extension Hoses Master Dual Valve Slave Marker Assist Assist Marker Interplant Hitch Extension Hoses Double Frame Extension Hoses/ Hitch Extension Hoses Master P8 Rev. 6/

85 M0880 Hydraulic System, 6 Row 36"/38" and 8 Row 30" TwoFold Low Profile Row Marker ITEM PART NO. QTY. DESCRIPTION See Master Lift Cylinder on page P68 G05 Machine Bushing, ¾", Gauge 3 G60008 GR037 8 Connector W/ORing, ¾"6 Male JIC To ORing ORing *A00 *A08 Hose Assembly, ⅜" x 8", 6 Row 36"/38" Hose Assembly, ⅜" x 0", 8 Row 30" 5 *A33 *A05 Hose Assembly, ⅜" x 78", 6 Row 36"/38" Hose Assembly, ⅜" x 0", 8 Row 30" 6 See Lift Assist Cylinder, 6 Row 30"/36"/38" and 8 Row 30" on page P70 7 *A000 Hose Assembly, ⅜" x 5" 8 *A09 *A055 Hose Assembly, ⅜" x ", 6 Row 36"/38" Hose Assembly, ⅜" x 66", 8 Row 30" 9 G60308 Tee, ¾"6 Male JIC 0 *A0 *A0 Hose Assembly, ⅜" x 3", 6 Row 36"/38" Hose Assembly, ⅜" x 56", 8 Row 30" *A38 *A039 Hose Assembly, ⅜" x 5", 6 Row 36"/38" Hose Assembly, ⅜" x 76", 8 Row 30" See Slave Lift Cylinder on page P69 3 See Row Marker Cylinder, 6 Row 36"/38" and 8 Row 30" on page P7 G68008 GR037 Elbow W/ORing, 90, ¾"6 Male JIC To ORing ORing 5 G70308 Bulkhead Tee, ¾"6 Male JIC 6 G30608 Lock Nut, ¾"6 7 *A076 Hose Assembly, ⅜" x 30" 8 *A335 Hose Assembly, ⅜" x 00" 9 G Swivel Elbow, 90, ¾"6 Male JIC To Female 0 *A079 Hose Assembly, ⅜" x " G65008 Swivel Elbow, 5, ¾"6 Male JIC To Female G GR05 Connector W/ORing, ¾"6 Male JIC To 9 6"8 ORing ORing 3 See "Row Marker Sequencing/Flow Control Valve" on page P75 G Swivel Elbow, 90, ¾"6 Male JIC To 9 6"8 Female 5 G60008 GR037 G GR65 Connector W/ORing, ¾"6 Male JIC To ORing ORing Connector W/ORing, ¾"6 Male JIC To 7 6"0 ORing ORing 6 *A076 Hose Assembly, ⅜" x 30", W/Interplant Package 7 *A308 *A309 Hose Assembly, ⅜" x 0", W/Interplant Package, 6 Row 36"/38" Hose Assembly, ⅜" x 70", W/Interplant Package, 8 Row 30" 8 *A03 *A090 Hose Assembly, ⅜" x 50", 6 Row 36"/38" Hose Assembly, ⅜" x 6", 8 Row 30" 9 *A337 *A3 Hose Assembly, ⅜" x 0", 6 Row 36"/38" Hose Assembly, ⅜" x 56", 8 Row 30" 30 *A3 *A37 Hose Assembly, ⅜" x 30", W/Double Frame Package Hose Assembly, ⅜" x ", W/Hitch Extensions 3 *A33 Hose Assembly, ⅜" x 00" 3 G0308 Union, ¾"6 Male JIC 33 See "Interplant Lift Cylinder" on page P70 3 G66008 Swivel Tee, ¾"6 JIC 35 *A350 Hose Assembly, ⅜" x 56", W/Interplant Package 36 *A3 Hose Assembly, ⅜" x 30", W/Interplant Package (Double Frame Only) * Hydraulic hose is not stocked by Kinze Repair Parts. Rev. 6/ P8

86 Electrical Components and SMV Sign M0880 PFA05/PFA055(ELC9/A906a/MTR7a/ELC8/PT9f) Amber Red P83 Rev. 6/

87 M0880 Electrical Components and SMV Sign ITEM PART NO. QTY. DESCRIPTION G003 G00 Hex Head Cap Screw, ¼"0 x ¾" Lock Nut, ¼"0, Grade B GA907 GA906 GA5385 Wiring Harness W/7 Terminal Female Connector, 39", Row 30"/36"/38 " and 6 Row 30 ( Light Connections) Wiring Harness W/7 Terminal Female Connector, 396", 6 Row 36"/38" and 8 Row 30 ( Light Connections) 7 Terminal Female Connector 3 GK8 3Pin Female Connector Kit (Black), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals GK5 3Pin Male Connector Kit (Black), Includes: (3) 3Pin Male Housings, (9) Socket Contacts, (9) Seals 5 GD089 Sealing Plug 6 GA807 Dust Plug (Black) 7 G006 G385 G00 8 GA670 GR956 GR08 9 GA6699 GA6700 GR956 GR957 GR GR08 0 GA683 GA68 GD75 Bracket GD75 G08 G00 3 G0039 G08 G Hex Head Cap Screw, ¼"0 x " Flat Washer, ¼" SAE Lock Nut, ¼"0, Grade B Single Amber Light Assembly Amber Lens Kit, Includes: () Amber Lens, () Gasket, and (3) Hex Head Cap Screws (Included W/GA670) Bulb (Included W/GA670) Double Light Assembly Double Light Assembly (Shown) Amber Lens Kit, Includes: () Amber Lens, () Gasket, and (3) Hex Head Cap Screws (Included W/GA6699 or GA6700) Red Lens Kit, Includes: () Red Lens, () Gasket, and (3) Hex Head Cap Screws (Included W/GA6699 or GA6700) Black Cover Kit, Includes: () Black Cover, () Gasket, and (3) Hex Head Cap Screws (Included W/GA6699 or GA6700) Bulb Bracket, L.H. (Shown) Bracket, R.H. UBolt, 7" x 7" x ½"3 Lock Washer, ½" Hex Nut, ½"3 Hex Head Cap Screw, ½"3 x ¾" Lock Washer, ½" Hex Nut, ½"3 GD830 Bracket (Used To Mount Light Bracket When HD Single Disc Fertilizer Openers Are Used) 5 GD99 SMV Sign 6 GK3 Pin Female Connector Kit (Black), Includes: (3) Pin Female Housings, (6) Pin Contacts, (6) Seals 7 GK30 Pin Male Connector Kit (Black), Includes: (3) Pin Male Housings, (6) Socket Contacts, (6) Seals Rev. 6/ P8

88 KPM I Electronic Seed Monitor M0880 (MTR6b) Power Lead Adapter Adapter Harness Blue Extension Harness Planter Harness Junction YHarness P85 Rev. 5/

89 M0880 KPM I Electronic Seed Monitor ITEM PART NO. QTY. DESCRIPTION GA7856 Power Lead Adapter GK67 Power Lead Adapter Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, (3) Male Terminal Pins 3 GK68 Console Cable Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, () Lock Ring, (3) Female Terminal Pins GA0570 GR390 GR39 GA060 GD7639 KPM I Backlit Console W/Mounting Bracket, Fuse Holder and Fuse, Power Lead Adapter (Item ), Brush (Item 3) and Dust Plug (Item 3) Mounting Bracket, KPM I (Included W/GA0570) Console Mounting Bracket Hardware Package (Includes Knobs and ¼" Hardware) (Included W/GA0570) Fuse Holder Fuse 5 Included In Planter Wiring Harness, See Item, on page P83 6 GA80 GA80 GA7850 GD993 7 GA55 GA090 8 GR059 Brush 9 G00 G385 G07 G003 Planter Harness W/Dust Caps, Row (7 Connectors) Planter Harness W/Dust Caps, 6 Row (9 Connectors) Planter Harness W/Dust Caps, 8 Row ( Connectors) Dust Cap (Included W/GA80, GA80, or GA7850) Seed Tube W/Computerized Sensor (Shown) Seed Tube (With Holes For Sensor Installation) (Included W/GA55) Hex Head Cap Screw, ¼"0 x ½" Flat Washer, ¼" SAE Lock Washer, ¼" Hex Nut, ¼"0 0 GA7857 Adapter Harness, ' GA785 GA7855 GD993 GA7853 GD993 3 GK8 GK36 GK5 GK363 5 GD089 Sealing Plug 6 GA806 GA GA807 GA9979 Extension Harness W/Dust Cap, 5' Extension Harness W/Dust Cap, 30' Dust Cap (Included W/GA785 or GA7855) Junction YHarness W/Dust Cap Dust Cap (Included W/GA7853) 3Pin Female Connector Kit (Black), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3Pin Female Connector Kit (Blue), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3Pin Male Connector Kit (Black), Includes: (3) 3Pin Male Housings, (9) Socket Contacts, (9) Seals 3Pin Male Connector Kit (Blue), Includes: (3) 3Pin Male Housings, (9) Socket Contacts, (9) Seals Dust Plug (Black) Dust Plug (Blue) Dust Plug (Black) Dust Plug (Blue) Rev. /6 P86

90 KPM II StackMode Electronic Seed Monitor M0880 (MTR6d/A090a) Radar Distance Sensor Magnetic Distance Sensor (MDS) SMM Blue Power Lead Adapter Blue Planter Harness Radar YCable Adapter Harness Extension Harness Junction YHarness Magnetic Distance Sensor (MDS) Adapter Acre Counter Switch Kit ITEM PART NO. QTY. DESCRIPTION GA7858 Radar Distance Sensor W/0' Cable GA806 Radar Sensor Pipe/Mounting Bracket Package 3 GK33 Pin Connector Kit W/Female Housing, Includes: () Pins and () Cable Clamp GA5600 Magnetic Distance Sensor 5 GD875 Magnetic Distance Sensor Pulse Wheel 6 GD69 Insulated Clamp, ⅜" 7 GD8770 Bracket P87 Rev. 5/

91 M0880 KPM II StackMode Electronic Seed Monitor ITEM PART NO. QTY. DESCRIPTION 8 G000 G09 G00 Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 9 GD877 Spring Wave Washer 0 GA9857 GR63 GR63 SMM Backlit Console W/Mounting Bracket and Dust Plug (Item 36) Mounting Bracket, KPM II StackMode and SMM Consoles (Included W/GA9857) Console Mounting Bracket Hardware Package (Includes Knobs and ¼" Hardware) (Included W/GA9857) GA7856 Power Lead Adapter GA9 Monitor/Radar Adapter Cable, 0" 3 GK67 Power Lead Adapter Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, (3) Male Terminal Pins GK68 Console Cable Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, () Lock Ring, (3) Female Terminal Pins 5 GA0575 GR39 GR393 GA060 GD7639 KPM II Backlit Console W/Mounting Bracket, Fuse Holder and Fuse, Power Lead Adapter (Item ), Brush (Item 3), Dust Plug (Item 3) and Monitor/Radar Adapter, 0" (Item ) Mounting Bracket, KPM II (Included W/GA0575) Console Mounting Bracket Hardware Package (Includes Knobs and ¼" Hardware) (Included W/GA0575) Fuse Holder Fuse 6 GK3 Pin Connector Kit W/Male Housing, () Female Socket Contacts and () Cable Clamp 7 Included In Planter Wiring Harness, See Item, on page P83 8 GA80 GA80 GA7850 GD993 Planter Harness W/Dust Caps, Row (7 Connectors) Planter Harness W/Dust Caps, 6 Row (9 Connectors) Planter Harness W/Dust Caps, 8 Row ( Connectors) Dust Cap (Included W/GA80, GA80, and GA7850) 9 GA55 GA090 0 GA7859 Magnetic Distance Sensor Adapter (Analog To Digital) GA807 Dust Plug (Black) GA9979 Dust Plug (Blue) G00 Hex Head Cap Screw, ¼"0 x ½" G385 Flat Washer, ¼" SAE G07 Lock Washer, ¼" G003 Hex Nut, ¼"0 Seed Tube W/Computerized Sensor Seed Tube (With Holes For Sensor Installation) (Included W/GA090) 3 GR059 Brush GR0586 Radar YCable (Used To Connect Radar Distance Sensor For Multiple Functions) 5 GA7857 Adapter Harness, ' 6 GA785 GA7855 GD993 Extension Harness W/Dust Cap, 5' Extension Harness W/Dust Cap, 30' Dust Cap (Included W/GA785, and GA7855) 7 GA7853 GD993 Junction YHarness W/Dust Cap Dust Cap (Included W/GD993) 8 GK3 Pin Female Connector Kit (Black), Includes: (3) Pin Female Housings, (6) Pin Contacts, (6) Seals 9 GK30 Pin Male Connector Kit (Black), Includes: (3) Pin Male Housings, (6) Socket Contacts, (6) Seals 30 GK8 GK36 3Pin Female Connector Kit (Black), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3Pin Female Connector Kit (Blue), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3 GK5 3Pin Male Connector Kit (Black), Includes: (3) 3Pin Male Housings, (9) Socket Contacts, (9) Seals GK363 3Pin Male Connector Kit (Blue), Includes: (3) 3Pin Male Housings, (9) Socket Contacts, (9) Seals 3 GD089 Sealing Plug 33 GK9 Acre Counter Switch Kit 3 GA806 GA9978 Dust Plug (Black) Dust Plug (Blue) A GA67 Magnetic Distance Sensor and Mounting Package (Items 9) Rev. /6 P88

92 KPM III Electronic Seed Monitor M0880 (MTR6dd) Radar Distance Sensor Magnetic Distance Sensor (MDS) Shaft Rotation Sensor Power Lead Adapter Planter Harness Radar YCable Adapter Harness Extension Harness Junction YHarness Magnetic Distance Sensor (MDS) Adapter Acre Counter Switch Kit P89 Rev. 5/

93 M0880 KPM III Electronic Seed Monitor ITEM PART NO. QTY. DESCRIPTION GA7858 Radar Distance Sensor W/0' Cable GA806 Radar Sensor Pipe/Mounting Bracket Package 3 GK33 Pin Connector Kit W/Female Housing, Includes: () Pins and () Cable Clamp GA5600 Magnetic Distance Sensor 5 GD875 Magnetic Distance Sensor Pulse Wheel 6 GD338 Insulated Clamp, /6" 7 GD8770 Bracket 8 G000 G09 G00 Hex Head Cap Screw, ⅜"6 x " Lock Washer, ⅜" Hex Nut, ⅜"6 9 GD877 Spring Wave Washer 0 GK9 Acre Counter Switch Kit GA7856 Power Lead Adapter GA9 Monitor/Radar Adapter Cable, 0" 3 GK67 Power Lead Adapter Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, (3) Male Terminal Pins GK68 Console Cable Connector Kit, Includes: () Cable Clamp, () 3Pin Connector, () Lock Ring, (3) Female Terminal Pins 5 GA806 GA9978 Dust Plug (Black) Dust Plug (Blue) 6 GK3 Pin Connector Kit W/Male Housing, () Female Socket Contacts and () Cable Clamp 7 Included In Planter Wiring Harness, See Item, on page P83 8 GA80 GA80 GA7850 GD993 9 GA55 GA090 Planter Harness W/Dust Caps, Row (7 Connectors) Planter Harness W/Dust Caps, 6 Row (9 Connectors) (6 Row Mechanical) Planter Harness W/Dust Caps, 8 Row ( Connectors) (6 Row Vacuum, 8 Row Mechanical/Vacuum) Dust Cap (Included W/GA80, GA80, and GA7850) Seed Tube W/Computerized Sensor Seed Tube (With Holes For Sensor Installation) (Included W/GA55) 0 GA7859 Magnetic Distance Sensor Adapter (Analog To Digital) G867x GA03 GR76 GA608 KPM III Backlit Console W/Brush (Item 3), Dust Plug (Item 5), Console Mounting Bracket Hardware and Power Harness Mounting Bracket Assembly, Includes: () Mounting Brackets, () Connector Halves, () Compression Spring, () Tension Knob, () ¼"0 x ¾" Hex Head Cap Screw, () ¼" Plastic Washer, () ¼" Steel Washer Console Mounting Bracket Hardware Package, Includes: (3) No. 03 x ⅝" Hex Socket Pan Head Plated Screw, (3) ¼" Plated Lock Washers (Included W/G867X) Power Harness (Included W/G867X) GA807 GA9979 Dust Plug (Black) Dust Plug (Blue) 3 GR059 Brush GR0586 Radar YCable (Used To Connect Radar Distance Sensor For Multiple 5 GA7857 Adapter Harness, ' 6 GA785 GA7855 GD993 7 GA7853 GD993 Extension Harness W/Dust Cap, 5' Extension Harness W/Dust Cap, 30' Dust Cap (Included W/GA785 and GA7855) Junction YHarness W/Dust Cap Dust Cap (Included W/GA7853) 8 GK3 Pin Female Connector Kit (Black), Includes: (3) Pin Female Housings, (6) Pin Contacts, (6) Seals 9 GK30 Pin Male Connector Kit (Black), Includes: (3) Pin Male Housings, (6) Socket Contacts, (6) Seals Rev. /6 P90

94 KPM III Electronic Seed Monitor M0880 ITEM PART NO. QTY. DESCRIPTION 30 GK8 GK36 3Pin Female Connector Kit (Black), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3Pin Female Connector Kit (Blue), Includes: (3) 3Pin Female Housings, (9) Pin Contacts, (9) Seals 3 GK5 GK363 3Pin Male Connector Kit (Black), Includes: (3) 3Pin Male Housings, (9) Pin Contacts, (9) Seals 3Pin Male Connector Kit (Blue), Includes: (3) 3Pin Male Housings, (9) Pin Contacts, (9) Seals 3 GD089 Sealing Plug 33 G0686 G09 G00 Hex Head Cap Screw, ⅜"6 x 8" Lock Washer, ⅜" Hex Nut, ⅜"6 3 GD88 Shaft Sensor Mount 35 GR5 Rotation Sensor 36 GR Actuator 37 GD868 Mount 38 G88 G03 G GD7 Cover 0 G097 G093 G098 Pan Head Screw, No. 03 x ½" Washer, No. 0 SAE Hex Nut, No. 03 Pan Head Machine Screw, No. 83 x ¼", Stainless Steel Lock Washer, No. 8, Internal/External, Stainless Steel Hex Nut, No. 83, Stainless Steel A GA67 Magnetic Distance Sensor and Mounting Package (Items 9) B GR763 KPM III Loaner (Display Only) C GA35 Shaft Sensor Mounting Pkg. (Items 33, 3, and 370) D GA35 Shaft Rotation Sensor ( Sensor, Actuator) (Items 35 and 36) P9 Rev. 5/3

95 This page left blank intentionally.

96 Double Disc Fertilizer Opener M0880 FOC007(PT5e/FRTZ08) To Pump To Opener Optional Liquid Fertilizer Only P93 Rev. 6/

97 M0880 Double Disc Fertilizer Opener ITEM PART NO. QTY. DESCRIPTION (Per Assy.) GA883 Bracket G0938 Grease Fitting, ¼"8, Taper Threads 3 G05 Cotter Pin, ⅛" x " GD657 Lockup Pin 5 GD096 G099 Hex Head Adjusting Bolt, ⅝"8 x 3¼" Hex Jam Nut, ⅝"8, Grade 6 GA038 Spring 7 GD087 Bushing, 6" I.D. x 3½" Long 8 GD3075 Machine Bushing, ⅝" (.030" Thick) 9 G05 Rivet, ¼" x 5 6" 0 GD3 Dust Cap G0503 G050 Hex Jam Nut, ⅝", Grade Hex Jam Nut, ⅝", L.H. Thread, Grade G00 Special Machine Bushing, ⅝" x " O.D. 3 GB03 Hub GA0 Bearing 5 GD306 Disc Blade, 3.5 mm x 5" 6 GD589 Inner Scraper 7 GA03 Mount 8 G009 G03 Hex Head Cap Screw, 5 6"8 x " Lock Washer, 5 6" 9 GA369 Drop Tube, Dry Fertilizer 0 GD705 Extension G068 Hose Clamp, No. 6 GA8685 Drop Tube, Liquid Fertilizer 3 G033 G386 G009 GA995 Shank 5 GA080 Scraper Mount 6 GD673 Scraper 7 G0305 G387 G09 G00 8 G005 G0 9 G006 G GD38 G08 G00 3 GA56 GA55 G36 Hex Head Cap Screw, 5 6"8 x ½" Flat Washer, 5 6" SAE Lock Nut, 5 6"8, Grade 8 Carriage Bolt, ⅜"6 x " Flat Washer, ⅜" SAE Lock Washer, ⅜" Hex Nut, ⅜"6 Hex Head Cap Screw, ½"3 x ½" Lock Nut, ½"3 Hex Head Cap Screw, ⅝" x 5" Lock Nut, ⅝" UBolt, ½" x ½" x½"3 Lock Washer, ½" Hex Nut, ½"3 Check Valve Assembly Check Valve (Included W/GA56) Hose Barb, ¼" Male NPT To ⅜" Barb (Included W/GA56) A GA885 Disc Blade and Bearing Assembly (Items 9 and 35) Rev. /6 P9

98 HD Single Disc Fertilizer Opener (Soil Press Wheel) M0880 (TWL35d) P95 Rev. 6/

99 M0880 HD Single Disc Fertilizer Opener (Soil Press Wheel) ITEM PART NO. QTY. (Per Assy.) GD9705 G08 G00 DESCRIPTION JBolt, ½"3 Lock Washer, ½" Hex Nut, ½"3 See HD Single Disc Fertilizer Opener (Blade and Drop Tube) on page P97 3 GD9706 Lockup Bar G000 Hex Head Cap Screw, ⅝" x 3" 5 G096 G060 6 GD95 Half Wheel Cover, Nylon 7 GA67 Bearing 8 GD953 Offset Tire 9 GD3 Half Wheel 0 G038 G08 G389 Flanged Whiz Lock Screw, 5 6"8 x ¾", No Serration Serrated Flange Nut, 5 6"8 Hex Head Cap Screw, ½"3 x ¾" Lock Washer, ½" Flat Washer, ½" SAE G030 Lock Washer, ⅝" G056 0 Machine Bushing, " (.08" Thick) 3 G0560 G056 Clevis Pin, ½" x ¾" Cotter Pin, ⅛" x ¾" GD88 Yoke 5 G39 Flat Washer, ⅝" SAE 6 See HD Single Disc Fertilizer Opener (Blade and Drop Tube) on page P97 7 GD79 Pivot Pin 8 G060 Spring Pin, ⅜" x " 9 GA8306 GA8305 G060 0 GD8308 Spring GB0 Spring Washer GD9709 Special Bolt Wheel Arm W/Grease Fitting, R.H. Wheel Arm W/Grease Fitting, L.H. (Shown) Grease Fitting, ¼"8 (Included W/GA8306 and GA8305) A GK5 Lockup Kit (Items and 3) B GA8877 Gauge Wheel Complete (Items 59) Rev. 6/ P96

100 HD Single Disc Fertilizer Opener (Blade and Drop Tube) M0880 FOC06/FOC007/FOC09(PT7c/FRTZ08) To Pump To Opener Optional Liquid Fertilizer Only ITEM PART NO. QTY. (Per Assy.) GD7900 GD87 DESCRIPTION Disc Blade, 8" Disc Blade, 0" (Optional) GB005 Spindle 3 GA86 Seal GA87 Bearing 5 GA5887 GD6553 GR088 G39 3 Arm W/Cups and Washers Inner Cup (Included W/GA5887) Outer Cup (Included W/GA5887) Flat Washer, ⅝" SAE (Included W/GA5887) 6 G Hex Head Cap Screw, ⅝" x ½" 7 G000 G008 Hex Head Cap Screw, ⅜"6 x " Lock Nut, ⅜"6 8 GB08 3 Bushing, 3" I.D. x ⅞" O.D. x 9 3" Long 9 GD838 Channel 0 GD796 Spring G06 Grease Fitting, ⅛" NPT G005 3 Hex Nut, ¾"0 3 GD7908 Tap Block GB03 Spring Seat 5 GA037 Bearing 6 G00 Machine Bushing, 6", 0 Gauge P97 Rev. 6/

101 M0880 HD Single Disc Fertilizer Opener (Blade and Drop Tube) ITEM PART NO. QTY. DESCRIPTION (Per Assy.) 7 G0507 Slotted Nut, " 8 GD0 Dust Cap 9 GD876 G037 G000 Pin Lock Washer, 7 6" Hex Nut, 7 6" 0 GD073 Compression Spring G059 Hair Pin Clip, No. G059 G0 6 6 Bolt, ½"3 x ½" Lock Nut, ½"3 3 G009 G387 G008 G0599 G387 G09 G00 Hex Head Cap Screw, ⅜"6 x ½" Flat Washer, ⅜" SAE Lock Nut, ⅜"6 Carriage Bolt, ⅜"6 x ¼" Flat Washer, ⅜" SAE Lock Washer, ⅜" Hex Nut, ⅜"6 5 GD79 Scraper 6 GB00 GB009 Drop Tube, R.H., Dry Fertilizer Drop Tube, L.H., Dry Fertilizer (Shown) 7 GA8689 GA8688 Drop Tube, L.H., Liquid Fertilizer (Shown) Drop Tube, R.H., Liquid Fertilizer 8 GD8 Bar 9 G000 G09 Hex Head Cap Screw, ⅜"6 x ¼" Lock Washer, ⅜" 30 GD087 Clamp 3 GD030 GD0303 Angle, R.H. Angle, L.H. (Shown) 3 G006 G0 Hex Head Cap Screw, ½"3 x " Lock Nut, ½"3 33 G03 Machine Bushing, ¼", 8 Gauge (As Required) 3 G086 G39 G030 Hex Head Cap Screw, ⅝" x 3¼" Flat Washer, ⅝" SAE Lock Washer, ⅝" 35 G060 Grease Fitting, ¼"8 36 GD0 Bushing, ¼" 37 G0039 G0 5 5 Hex Head Cap Screw, ½"3 x ¾" Lock Nut, ½"3 38 G059 Cotter Pin, 3 6" x ½" 39 GA70 GA739 Opener Mount, R.H. Opener Mount, L.H. (Shown) 0 GD GD559 G030 G00 UBolt, 7" x 7" x ⅝" (8½" Long) UBolt, 7" x 7" x ⅝" (9" Long) Lock Washer, ⅝" Hex Nut, ⅝" GD7907 Special Bolt GB006 Rod Guide 3 GD839 Storage Strap GD7900 Sleeve, ½" x ½" Long 5 G389 3 Flat Washer, ½" SAE 6 GA56 GA55 G36 Check Valve, Low Rate Check Valve (Included W/GA56) Hose Barb, ¼" Male NPT To ⅜" Barb (Included W/GA56) Rev. 6/ P98

102 Notched Single Disc Fertilizer Opener M0880 FOC08(TWL3e/TWL3f/TWL3g/FRTZ68/FRTZ08) NOTE: R.H. and L.H. is determined by which side of blade it is on in the direction of travel. To Pump To Opener Optional Liquid Fertilizer Only Liquid Fertilizer STYLE A (Part Number Stamped On Part) Dry Fertilizer STYLE B STYLE A P99 Rev. 5/

103 M0880 Notched Single Disc Fertilizer Opener ITEM PART NO. QTY. (Per Assy.) G007 G DESCRIPTION Hex Head Cap Screw, ½"3 x ½" Hex Nut, ½"3 GD677 Washer, ½" O.D., 7 Gauge, Hardened 3 GB096 Arm, 3 ½" G060 Grease Fitting, ¼"8 5 GD685 Bushing, ¾" O.D. x ½" Long 6 GA6966 Compression Spring Assembly 7 G007 G387 G008 Hex Head Cap Screw, ⅜"6 x ¾" Flat Washer, ⅜" SAE Lock Nut, ⅜"6 8 GD06 Sleeve, 3 6" Long 9 GA933 GA93 0 GD557 GD558 Pivot Arm, L.H. (Shown) Pivot Arm, R.H. Scraper, L.H. (Shown) Scraper, R.H. G000 6 Hex Head Cap Screw, ⅜"6 x ¾" G0306 G008 3 G099 G03 G Carriage Bolt, ⅜"6 x " Lock Nut, ⅜"6 Hex Head Cap Screw, 5 6"8 x ⅞" Lock Washer, 5 6" Flat Washer, 5 6" SAE GD679 Stepped Spacer, 3" Long 5 GA937 GA8603 Hub W/Bearing Bearing, Double Row (Included W/GA937) 6 G00 Hex Head Cap Screw, ⅝" x 5½" 7 G006 Hex Head Cap Screw, ⅝" x 5" 8 GD676 Disc Blade, Notched, 6¾" 9 G087 Hex Head Cap Screw, ½"3 x 6" 0 GD387 G389 G0 GB033 GB03 GA397 GA398 3 GA007 GA008 GA56 GA55 G36 5 GA9565 GA956 GD3 G030 G00 6 GA98 GA989 GD3 G030 G00 UBolt, ½" x ½" x ½"3 Flat Washer, ½" Plated SAE Lock Nut, ½"3 Knife, L.H. (Shown) Knife, R.H. Drop Tube, L.H., Liquid Fertilizer Drop Tube, R.H., Liquid Fertilizer (Shown) Drop Tube, L.H., Dry Fertilizer Drop Tube, R.H., Dry Fertilizer (Shown) Check Valve, Low Rate Check Valve (Included W/GA56) Hose Barb, ¼" Male NPT To ⅜" Barb (Included W/GA56) Opener Mount Assembly, Liquid Fertilizer Opener Mount (Included W/GA9565) UBolt, 5" x 7" x ⅝" (Included W/GA9565) Lock Washer, ⅝" (Included W/GA9565) Hex Nut, ⅝" (Included W/GA9565) Opener Mount Assembly, L.H., Dry Fertilizer Opener Mount (Included W/GA98) UBolt, 5" x 7" x ⅝" (Included W/GA98) Lock Washer, ⅝" (Included W/GA98) Hex Nut, ⅝" (Included W/GA98) Rev. /6 P00

104 Notched Single Disc Fertilizer Opener M0880 ITEM PART NO. QTY. (Per Assy.) 7 GA98 GA980 GD3 G030 G00 8 GB005 GB000 9 GA08 GA09 DESCRIPTION Opener Mount Assembly, R.H., Dry Fertilizer Opener Mount (Included W/GA98) UBolt, 5" x 7" x ⅝" (Included W/GA98) Lock Washer, ⅝" (Included W/GA98) Hex Nut, ⅝" (Included W/GA98) Mount, L.H. Mount, R.H. (Shown) Drop Tube, Liquid Fertilizer (Shown) Drop Tube, Liquid Fertilizer 30 G389 Flat Washer, ½" Plated SAE 3 G007 Lock Nut, ⅝" 3 G0 Lock Nut, ½"3 33 G39 Flat Washer, ⅝" SAE 3 G07 Washer, ⅝" USS 35 G050 Machine Bushing, ½", 8 Gauge (As Required) P0 Rev. 5/

105 This page left blank intentionally.

106 Residue Wheel Attachment for Notched Single Disc Fertilizer Opener M0880 DFC0(FRTZ65l) P03 Rev. 6/

107 M0880 Residue Wheel Attachment for Notched Single Disc Fertilizer Opener ITEM PART NO. QTY. DESCRIPTION (Per Assy.) See Notched Single Disc Fertilizer Opener on page P99 GD68 Bushing, ⅓" Long 3 GD78 Adjustment Lever G0603 Spring Pin, ¼" x ¼" 5 G03 G0 6 G0830 G39 G007 Hex Head Cap Screw, ½"3 x 7" Lock Nut, ½"3 Hex Head Cap Screw, ⅝" x 7½" Flat Washer, ⅝" SAE Lock Nut, ⅝" 7 GD836 Sleeve, ⅛" Long 8 GD796 Spring 9 G0306 G387 G008 0 GA7999 GA7998 G060 G033 G009 GD3 Dust Cap 3 GD055 Wheel, Tine, ⅜" x " GA565 GA0 6 6 Carriage Bolt, ⅜"6 x " Flat Washer, ⅜" SAE Lock Nut, ⅜"6 Mount W/Grease Fitting, L.H. (Shown) Mount W/Grease Fitting, R.H. Grease Fitting, ¼"8 (Included W/GA7999 and GA7998) Hex Head Cap Screw, 5 6"8 x ½" Lock Nut, 5 6"8, Grade 8 Hub W/Bearings Bearing (Included W/GA565) 5 GD97 Backing Plate 6 GD7870 Spacer, 6" I.D. x ½" Long 7 GD88 Spacer 8 G0908 G GD65 GD66 Carriage Bolt, ⅝" x 3" Hex Jam Nut, ⅝", Grade Spring, L.H. (Shown) Spring, R.H. A GA75 GA76 Wheel Assembly, Tine, L.H. (Items and 35)(Shown) Wheel Assembly, Tine, R.H. (Items and 35) Rev. 6/ P0

108 Depth/Gauge Wheel Attachment for Notched Single Disc Fertilizer Opener M0880 (FRTZ56) FOR USE WITH NOTCHED SINGLE DISC FERTILIZER OPENER ITEM PART NO. QTY. DESCRIPTION (Per Assy.) G000 Hex Head Cap Screw, ⅝" x 3" G39 Flat Washer, ⅝" SAE 3 See Notched Single Disc Fertilizer Opener on page P99 GA97 Blade Mount 5 G033 Machine Bushing, ", 0 Gauge 6 GA0037 GA0036 Wheel Mount, L.H. (Shown) Wheel Mount, R.H. 7 GD3309 Spacer 8 GD3 Half Wheel 9 GD953 Offset Tire 0 GA67 Bearing GD95 Half Wheel Cover, Nylon G096 G060 Flanged Whiz Lock Screw, 5 6"8 x ¾", No Serration Serrated Flange Nut, 5 6"8 3 G00 Special Machine Bushing, ⅝" x " O.D. (As Required) A GA8877 Gauge Wheel Complete (Items 8) P05 Rev. 6/

109 M0880 Fertilizer Opener Mounting Bar (Double Disc and Notched Single Disc Fertilizer Openers) FOC008(PT8) Single Frame and Double Frame Planters Single Frame Planters Only Single Frame Planters Only ITEM PART NO. QTY. DESCRIPTION GA53 Support, L.H., Single Frame Planters Only G0035 G08 G00 3 GA537 GA536 GA93 GA930 GD38 G08 G00 Hex Head Cap Screw, ½"3 x " Lock Washer, ½" Hex Nut, ½"3 Support,9" Long, L.H. (Shown), 8 Row 30" Single Frame Planters Support,9" Long, R.H., 8 Row 30" Single Frame Planters Support,8⅛" Long, L.H., 8 Row 30" Double Frame Planters Support,8⅛" Long, R.H., 8 Row 30" Double Frame Planters UBolt, ½" x ½" x ½"3 Lock Washer, ½" Hex Nut, ½"3 5 GA530 Support, R.H., Single Frame Planters Only 6 GD G030 G00 7 GD685 GD6855 GD6853 GD685 GD6856 UBolt, 7" x 7" x ⅝" Lock Washer, ⅝" Hex Nut, ⅝" Toolbar, ½" x ½" x 05", Row 30" Toolbar, ½" x ½" x 9", Row 36"/38" Toolbar, ½" x ½" x 65", 6 Row 30" Toolbar, ½" x ½" x 05", 6 Row 36"/38" Toolbar, ½" x ½" x 5", 8 Row 30" A G6795X Support Bundle (Items,,, 5 and 6) Rev. 6/ P06

110 Dry Fertilizer Transmission Assembly M0880 (PT9f) P07 Rev. /6

111 M0880 Dry Fertilizer Transmission Assembly ITEM PART NO. QTY. DESCRIPTION G060 Spring Pin, ¼" x ½" G033 Machine Bushing, ", 0 Gauge 3 GA53 GA56 GD558 3 Lynch Pin, ¼" 5 GA505 GA507 GA5 GA55 GA G33098 GR09 7 G09 G0 8 GA7336 GD76 GD06 G387 G09 G007 Spacer W/Bearing Bearing, ⅞" Hex Bore, Cylindrical (Included W/GA56) Sprocket, 5 Tooth Sprocket, 9 Tooth Sprocket, 30 Tooth Sprocket, 33 Tooth Sprocket, 35 Tooth Chain, No. 0, 98 Pitch Including Connector Link Connector Link, No. 0 Carriage Bolt, ½"3 x ½" Lock Nut, ½"3 Idler W/BoltOn Sprockets Sprocket, Tooth (Included W/GA7336) Sleeve, 3 6" Long (Included W/GA7336) Flat Washer, ⅜" SAE (Included W/GA7336) Lock Washer, ⅜" (Included W/GA7336) Hex Head Cap Screw, ⅜"6 x ¾" (Included W/GA7336) 9 GD3807 Sleeve, ⅝" I.D. x ⅞" O.D. x 5 6" Long 0 G0053 G0585 G0033 G006 G08 G00 Hex Head Cap Screw, ½"3 x ½" Hex Head Cap Screw, ½"3 x 3¼" Hex Head Cap Screw, ½"3 x 3½" Hex Head Cap Screw, ½"3 x " Lock Washer, ½" Hex Nut, ½"3 G389 Flat Washer, ½" Plated SAE GA733 Sprocket Storage Rod 3 GD06 Spacer, ⅜" G060 Cotter Pin, ¼" x " 5 G08 G055 Clevis Pin, 3/6" x " Cotter Pin, /6" x ½" 6 GD77 Shear Coupler 7 GD7870 Shaft, 7" 8 GA798 GA56 GA56 G060 9 GD5857 Spring 0 G008 G009 GA35 G05 Plate W/Bearings and Grease Fitting Bearing, ⅞" Hex Bore, Cylindrical (Included W/GA798) Special Bearing, ⅞" Hex Bore x.6" (Included W/GA798) Grease Fitting, ¼"8 (Included W/GA798) Clevis Pin, 5 6" x ¾" Retaining Ring, 5 6" Ratchet Arm W/Protective Closure Protective Closure GD7867 Coupler, 3", Row 36"/38" and 6 Row 36"/38" Only 3 GD787 Hex Shaft, ⅞" x 6" (3 Holes), Row 36"/38" and 6 Row 36"/38" Only GD5886 Coupler, ¾" Rev. /6 P08

112 Dry Fertilizer Hopper and Mounts M0880 DFC009/DFC0/DFC08(PT30a) P09 Rev. 6/

113 M0880 Dry Fertilizer Hopper and Mounts ITEM PART NO. QTY. DESCRIPTION (Per Hopper) GD09 Strap GD00 Outlet Housing 3 G060 Cotter Pin, ¼" x " GB000 Bearing 5 G0676 Hose Clamp, No. 36, Stainless Steel 6 GA565 Saddle 7 GD398 Rubber Tube 8 G067 Hose Clamp, No. 8 9 GA086 Hopper Mount, R.H. 0 G0037 G389 G08 G00 Hex Head Cap Screw, ½"3 x ¼" Flat Washer, ½" SAE Lock Washer, ½" Hex Nut, ½"3 GA0863 Hopper Mount, L.H. GD G077 G030 G00 Hex Nut, ⅝" 3 G056 G05 GB098 Auger, R.H. 5 GB099 Auger, L.H. 6 GD788 Shaft 7 G0587 G G0303 G00 GD3 G03 G UBolt, 7" x 7" x ⅝" Hex Head Cap Screw, ⅝" x 9½" Lock Washer, ⅝" Clevis Pin, ½" x 3" Cotter Pin, ⅛" x " 9 GD379 Hopper 0 G060 Grease Fitting, ¼"8 G07 G00 GD3 G03 G006 Hex Nut, 5 6"8 G0303 G386 G03 G Hex Head Cap Screw, ¼"0 x ", Stainless Steel Hex Nut, ¼"0, Stainless Steel Carriage Bolt, 5 6"8 x " Special Washer, ⅜" x ½" O.D. Rubber Washer Lock Washer, 5 6" Hex Nut, 5 6"8 Hex Head Cap Screw, 5 6"8 x ¼" Special Washer, ⅜" x ½" O.D. Rubber Washer Lock Washer, 5 6" Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Lock Washer, 5 6" Hex Nut, 5 6"8 3 GD07 Baffle G0670 Hair Pin Clip, No. 3 5 GA0898 GD380 GD G0655 GD0 G07 G386 G03 G006 6 G033 G386 G03 G006 Lid W/Retainers, Clips, Rivets, Rubber Straps and Hardware Front Clip (Included W/GA0898) Rear Retainer (Included W/GA0898) Rivet, 3 6" x 3 3" (Included W/GA0898) Rubber Strap (Included W/GA0898) Hex Head Cap Screw, 5 6"8 x ¼" (Included W/GA0898) Flat Washer, 5 6" SAE (Included W/GA0898) Lock Washer, 5 6" (Included W/GA0898) Hex Nut, 5 6"8 (Included W/GA0898) Hex Head Cap Screw, 5 6"8 x ½" Flat Washer, 5 6" SAE Lock Washer, 5 6" Hex Nut, 5 6"8 A GA5666 Hopper SubAssembly (Items,6,8,9, and ) B GA5667 Hopper Hardware Box (Items, 3,, 7,, 3 and 6) Rev. 6/ P0

114 Dry Fertilizer Couplers/Shafts M0880 RH090(PT3/PT3/PT33/PT3/PT35) Row 30" Planter Toolbar Row 36"/38" Planter Toolbar 6 Row 30" Planter Toolbar 6 Row 36"/38" Planter Toolbar 8 Row 30" Planter Toolbar P Rev. 6/

115 M0880 Dry Fertilizer Couplers/Shafts ITEM PART NO. QTY. DESCRIPTION GD5886 Coupler, ¾" GD585.5 Hex Shaft, ⅞" x 5½" ( Hole) 3 GD7867 Coupler, 3" G033 Machine Bushing, ", 0 Gauge 5 GD585.5 Hex Shaft, ⅞" x 5½" ( Hole) 6 GD7868 Coupler, 7" 7 GD587.5 Hex Shaft, ⅞" x 7½" ( Hole) Rev. 6/ P

116 Liquid Fertilizer Tanks, Saddle, Mounts, Hoses, and Fittings, Row M0880 LFC0rev(PT36h/PT5) 7" Lid ¼" At Bottom Of Tank ¾" At Bottom and Top Of Tank P3 Rev. 5/

117 M0880 Liquid Fertilizer Tanks, Saddle, Mounts, Hoses, and Fittings, Row ITEM PART NO. QTY. DESCRIPTION GD57 Dust Plug, ¼" Male Cam Lock GD56 Adapter, ¼" Barb To Female Cam Lock 3 GD5 Adapter, ¼" Male NPT To Cam Lock GA597 Quick Fill Mount 5 G069 Close Nipple, ¼" NPT 6 GA976 GR05 GR06 GR07 GR08 GR09 Shutoff Valve, ¼" NPT Body ORing (Included W/GA976) Stem ORing (Included W/GA976) Teflon Seat (Included W/GA976) Ball (Included W/GA976) Handle (Included W/GA976) 7 GA7375 Tank Mount ( Per Tank) 8 GD86 Pad, 8" x ' (For Two 30" Tanks) 9 GA09 GA68 GR708 GR397 GR0508 GR9 0 GD50 Band, 30" G097 Elbow, 90, ¾" NPT To Barb G078 Hose Clamp, No. 6 3 G05 Hose, ¾" x 7" ( Per Tank) G0096 Pipe Plug, ¾" NPT 5 GD337 G8 Tank W/Lid and Fittings, 30" x 50 Gallon, Row Lid W/Vent, 7" (Top Of Tank) (Included W/GA09) ¾" Polypropylene Fitting Assembly (Overflow Fitting, Nut, Bushing, and ORing) (Top and Bottom Of Tank) (Included W/GA09) Overflow Fitting ¼" Polypropylene Fitting Assembly (Nut, Bushing, and ORing) (Bottom Of Tank) (Included W/GA09) Seal (Included W/GA09) JBolt, 5 6"8 Lock Nut W/Nylon Insert, 5 6"8 6 GD00 Mounting Angle ( Per Tank) 7 GD78 G03 G005 UBolt, 7" x 7" x ¾"0 Lock Washer, ¾" Hex Nut, ¾"0 8 G066 Adapter, ¼" NPT To Barb 9 G067 Hose Clamp, No. 8 0 GD55 Dust Cap, ¼" Cam Lock GD75 GD7 G08 G00 UBolt, 7" x 7" x ½"3 UBolt, 5" x 7" x ½"3 Lock Washer, ½" Hex Nut, ½"3 G067 Hose Clamp, No. 3 G0007 G030 G00 Hex Head Cap Screw, ⅝" x ½" Lock Washer, ⅝" Hex Nut, ⅝" G069 Elbow, 90, ¼" NPT To Barb 5 G000 Hose, ¼" x ', Row 6 G0633 Tee, ¼" Barb Rev. 3/7 P

118 Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings, 6 and 8 Row M0880 LFC0rev(PT36i/PT5) 7" Lid ¾" At Bottom and Top Of Tank ¼" At Bottom Of Tank P5 Rev. 5/

119 M0880 Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings, 6 and 8 Row ITEM PART NO. QTY. DESCRIPTION GD57 Dust Plug, ¼" Male Cam Lock GD56 Adapter, ¼" Barb To Female Cam Lock 3 GD5 Adapter, ¼" Male NPT To Cam Lock GA597 Quick Fill Mount 5 G069 Close Nipple, ¼" NPT 6 GA976 GR05 GR06 GR07 GR08 GR09 Shutoff Valve, ¼" NPT Body ORing (Included W/GA976) Stem ORing (Included W/GA976) Teflon Seat (Included W/GA976) Ball (Included W/GA976) Handle (Included W/GA976) 7 GA7375 Tank Mount ( Per Tank) 8 GD86 Pad, 8" x ' (For Two 30" Tanks) 9 GA09 GA68 GR9 GR708 GR0508 Tank W/Lid and Fittings, 30" x 50 Gallon, 6 and 8 Row Lid, 7" (Included W/GA09) Lid Seal (Included W/GA09) ¾" Polypropylene Fitting Assembly (Overflow Fitting, Nut, Bushing, and ORing) (Top and Bottom Of Tank) (Included W/GA09) ¼" Polypropylene Fitting Assembly (Nut, Bushing, and ORing) (Bottom Of Tank) (Included W/GA09) 0 GD Strap, 8" G066 Adapter, ¼" NPT To Barb G067 Hose Clamp, No. 3 G600 Black Helix Hose, ¼" x 8' G0096 Pipe Plug, ¾" NPT 5 G085 G090 Hex Head Tap Bolt, ⅜"6 x 5" Lock Nut, ⅜"6 6 GD00 Mounting Angle ( Per Tank) 7 GD78 G03 G005 UBolt, 7" x 7" x ¾"0 Lock Washer, ¾" Hex Nut, ¾"0 8 G066 Adapter, ¼" NPT To Barb 9 G067 Hose Clamp, No. 8 0 GD55 Dust Cap, ¼" Cam Lock GD75 GD7 G08 G00 UBolt, 7" x 7" x ½"3 UBolt, 5" x 7" x ½"3 Lock Washer, ½" Hex Nut, ½"3 G067 Hose Clamp, No. 3 G0007 G030 G00 Hex Head Cap Screw, ⅝" x ½" Lock Washer, ⅝" Hex Nut, ⅝" G069 Elbow, 90, ¼" NPT To Barb 5 G000 G0003 Hose, ¼" x 7', 6 Row Hose, ¼" x 3', 8 Row 6 G0633 Tee, ¼" Barb 7 GA G000 G09 8 GD0060 G000 G09 9 GD3 Anchor Hose Guide Hex Head Cap Screw, ⅜"6 x ¼" Serrated Flange Nut, ⅜"6 Hose Bracket Hex Head Cap Screw, ⅜"6 x ¼" Serrated Flange Nut, ⅜"6 Rev. 3/7 P6

120 Liquid Fertilizer Piston Pump Drive M0880 (FRTZ69) 50 Tooth Drive Sprocket and 8 Tooth Driven Sprocket 8 Tooth Sprocket 50 Tooth Sprocket P7 Rev. 6/

121 M0880 Liquid Fertilizer Piston Pump Drive ITEM PART NO. QTY. DESCRIPTION See Liquid Fertilizer Piston Pump Flow Divider on page P7 GD700 Adapter, ¼" NPT To ⅜" Barb 3 G068 Hose Clamp, No. 6 G300 G3003 G300 Hose, ⅜" x 30', Row Hose, ⅜" x 60', 6 Row Hose, ⅜" x 00', 8 Row 5 See Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket on page P3 6 See Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket on page P3 7 See Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket on page P3 8 G000 G09 G00 9 GD80 Plate 0 G0003 G387 GR G09 G00 G078 G009 G0670 GA7336 GD76 GD06 G387 G09 G007 3 G00 G07 G53 G3306 GR09 Hex Head Cap Screw, ⅜"6 x ¼" Lock Washer, ⅜" Hex Nut, ⅜"6 5 GD7308 Sleeve, ¼" O.D. x ⅝" Long 6 G0303 G03 G006 7 GD05 G030 G Hex Head Cap Screw, ⅜"6 x ½" Flat Washer, ⅜" SAE Mounting Pad Lock Washer, ⅜" Hex Nut, ⅜"6 Clevis Pin, 5 6" x " Retaining Ring, 5 6" Hair Pin Clip, No. 3 Idler W/BoltOn Sprockets Sprocket, Tooth (Included W/GA7336) Sleeve, 3 6" Long (Included W/GA7336) Flat Washer, ⅜" SAE (Included W/GA7336) Lock Washer, ⅜" (Included W/GA7336) Hex Head Cap Screw, ⅜"6 x ¾" (Included W/GA7336) Hex Socket Button Head Cap Screw, ¼"0 x ½", Grade 8 Lock Washer, ¼" Fender Washer, ¼" Chain, No. 0, 6 Pitch Including Connector Link Connector Link, No. 0 Carriage Bolt, 5 6"8 x " Lock Washer, 5 6" Hex Nut, 5 6"8 Lock Clamp Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration 8 GA59 Sprocket, 50 Tooth 9 G033 Machine Bushing, ", 0 Gauge 0 G3000 Flangette G0003 Bearing, ⅞" Hex Bore, Spherical GD5685 Clamp 3 GA650 G06 G060 G007 G08 G00 5 GD5857 Spring Drive Plate W/Grease Fitting Grease Fitting, ⅛" NPT Grease Fitting, ¼"8 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½" Hex Nut, ½"3 Rev. / P8

122 Liquid Fertilizer Piston Pump Drive M0880 ITEM PART NO. QTY. DESCRIPTION 6 GD5990 Shaft, 7" 7 GD3839 Coupler, " 8 G060 Spring Pin, ¼" x ½" 9 G060 Cotter Pin, ¼" x " 30 G030 G093 Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration 3 G075 External Inverted Snap Ring, ⅞" 3 G096 External Inverted Snap Ring, ½" 33 G069 Elbow, 90, ¼" NPT To Barb 3 See Liquid Fertilizer Tanks, Saddle, Mounts, Hoses, and Fittings, Row on page P3 See Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings, 6 and 8 Row on page P5 35 G065 Reducing Bushing, ½" Male NPT To ¼" Female 36 G0995 Reducing Bushing, " Male NPT To ¾" Female, Stainless Steel 37 G09 Pipe Plug, ¼" NPT 38 GA3893 GR0880 GR088 GR088 GR0883 Strainer Complete Screen, No. 0 Mesh (Included W/GA3893) Gasket (Included W/GA3893) YBody (Included W/GA3893) End Cap (Included W/GA3893) 39 G099 Close Nipple, ¾" NPT, Stainless Steel 0 GD3 Handle GD7 Tightener Shaft, ⅞" G078 Vinyl Cap 3 GD3 Sleeve, ¼" GD933 Release Collar, R.H. 5 GD3 Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 6 G37 Reducing Bushing, ½" Male NPT To ¾" Female 7 See Liquid Fertilizer Piston Pump Uses 8 Tooth Sprocket on page P5 A GK69 Lock Clamp Kit (Items 7 and 30) B GK378 Wrap Spring Wrench Replacement Kit, Blue Collar, R.H., (Items 3, 5, 3, 3 and 6) P9 Rev. /

123 This page left blank intentionally.

124 Liquid Fertilizer Piston Pump (Crankcase Assembly) Uses 8 Tooth Sprocket M0880 JBL0099/CCU077(FRTZ7a) Model LM55R P Rev. 6/

125 M0880 Liquid Fertilizer Piston Pump (Crankcase Assembly) Uses 8 Tooth Sprocket ITEM PART NO. QTY. DESCRIPTION GR389 Sprocket, 8 Tooth G0688 Square Head Set Screw, ⅜"6 x ⅝" 3 GR5 Repair Kit GR7 Bearing 5 GR0 Woodruff Key, ⅜"6 x ¾" 6 GR67 Square Head Cap Screw, ⅜"6 x ¾" 7 G003 Hex Head Cap Screw, 5 6"8 x ¾" 8 GR68 Scale 9 G008 Lock Nut, ⅜"6 0 G Hex Socket Head Set Screw, 5 6"8 x ⅜" GR65 Arm GR Flange 3 GR6 Bearing GR Crankshaft 5 GR8 Setting Arm Key 6 See Liquid Fertilizer Piston Pump Drive on page P7 7 GR Adjustment Wrench A GA8069 Piston Pump Complete W/8 Tooth Sprocket (Model LM55R), Includes Crankcase Assembly On This Page and Cylinder Assembly on page P33 Rev. 6/ P

126 Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket M0880 JBL9099(FRTZ7) Model LM55R P3 Rev. 6/

127 M0880 Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 8 Tooth Sprocket ITEM PART NO. QTY. DESCRIPTION GR5 Repair Kit GR Discharge Valve 3 GR3 Outboard Cylinder GR Suction Valve 5 GR Inboard Cylinder 6 GR3 Stuffing Box Insert 7 GR33 Retaining Ring 8 GR30 Packing Spring 9 GR9 3 Washer 0 GR5 Suction Manifold Rev. 6/ P

128 Liquid Fertilizer Piston Pump Uses 8 Tooth Sprocket M0880 (A335a/GR808) Model NGP6055 P5 Rev. 6/

129 M0880 Liquid Fertilizer Piston Pump Uses 8 Tooth Sprocket ITEM PART NO. QTY. DESCRIPTION GR80 G099 Flange Cover Assembly Hex Head Cap Screw, 5 6"8 x ⅞" GR80 Connecting Rod Assembly 3 GR80 G Spacer Assembly Hex Socket Head Set Screw, 5 6"8 x ⅜" GR3 Plug 5 GR53 Vent Plug 6 GR Woodruff Key 7 GR0 Eccentric Pin 8 GR Pin 9 GR0 Bearing 0 GR805 Setting Hub Assembly GR3 Stuffing Box Insert GR389 Sprocket, 8 Tooth 3 GR808 Adjustment Wrench GR806 Setting Pointer Assembly 5 GR795 Repair Kit, Includes: (6) Gaskets, (9) ORings, () Washers, () Retaining Ring, () Oil Seals, () Snap Ring, () Thrust Washer, () Rod Bushing, () Flange Plunger Packings, () Packing Springs, () Rod Vee Packing Sets 6 GR799 Discharge Valve Assembly 7 GR797 Suction Valve Assembly 8 GR8 3 Setting Arm Key 9 GR6 Bearing 0 G0306 G008 G0003 G387 G09 G00 GR003 Valve Cover Carriage Bolt, ⅜"6 x " Lock Nut, ⅜"6 Hex Head Cap Screw, ⅜"6 x ½" Flat Washer, ⅜" SAE Lock Washer, ⅜" Hex Nut, ⅜"6 A GA330 Piston Pump Complete W/8 Tooth Sprocket (Model NGP6055) Rev. 6/ P6

130 Liquid Fertilizer Piston Pump Flow Divider M0880 (FRTZ59/PT0a/FRTZ0c) Model FD00 Flow Divider, Outlet ¾" NPT P7 Rev. /

131 M0880 Liquid Fertilizer Piston Pump Flow Divider ITEM PART NO. QTY. DESCRIPTION GR53 Vent Plug GR5 GR5 Hex Socket Head Screw, ¼"0 x ¾" Lock Washer, ¼", Stainless Steel 3 GR50 Cap GR5 Needle Assembly W/Seal Kit (Item ) 5 GR55 Seal Kit, Includes: (3) ORings, () Seal, () Spring 6 GR535 Sleeve 7 GR533 Body ( Outlet) 8 GR57 Sleeve, " O.D. x ½" Long, Stainless Steel A GA893 Liquid Fertilizer Piston Pump Flow Divider Complete, Outlet (Model FD00) Rev. / P8

132 Liquid Fertilizer Squeeze Pump Mounting Bracket and Drive M0880 (FRTZ70) ⅞" Hex Bore ITEM PART NO. QTY. DESCRIPTION See Liquid Fertilizer Squeeze Pump, Row on page P3 See Liquid Fertilizer Squeeze Pump, 6 Row on page P3 See Liquid Fertilizer Squeeze Pump, 8 Row on page P33 GD77 Shear Coupler 3 G08 G055 GA505 GA507 GA653 GA50 GA65 GA655 Clevis Pin, 3/6 x " Cotter Pin, /6" x ½" 5 GD558 Lynch Pin, ¼" Sprocket, 5 Tooth Sprocket, 9 Tooth Sprocket, 3 Tooth Sprocket, 3 Tooth Sprocket, 6 Tooth Sprocket, 6 Tooth (Optional) P9 Rev. 5/3

133 M0880 Liquid Fertilizer Squeeze Pump Mounting Bracket and Drive ITEM PART NO. QTY. DESCRIPTION 6 See Liquid Fertilizer Tanks, Saddle, Mounts, Hoses, and Fittings, Row on page P3 See Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings, 6 and 8 Row on page P5 7 GD7308 Sleeve, ¼" O.D. x ⅝" Long 8 GA7336 GD76 GD06 G387 G09 G007 9 G00 G07 G385 0 G3300 GR09 GD05 Lock Clamp G030 G093 3 G0303 G03 G Idler W/BoltOn Sprockets Sprocket, Tooth (Included W/GA7336) Sleeve, 3 6" Long (Included W/GA7336) Flat Washer, ⅜" SAE (Included W/GA7336) Lock Washer, ⅜" (Included W/GA7336) Hex Head Cap Screw, ⅜"6 x ¾" (Included W/GA7336) Hex Socket Button Head Cap Screw, ¼"0 x ½", Grade 8 Lock Washer, ¼" Flat Washer, ¼" SAE Chain, No. 0, 0 Pitch Including Connector Link Connector Link, No. 0 Square Head Machine Bolt, 5 6"8 x ¾" Flange Nut, 5 6"8, No Serration Carriage Bolt, 5 6"8 x " Lock Washer, 5 6" Hex Nut, 5 6"8 G033 Machine Bushing, ", 0 Gauge 5 G3000 Flangette 6 G0003 Bearing, ⅞" Hex Bore, Spherical 7 GD5685 Clamp 8 G007 G08 G00 9 GD5857 Spring 0 GD5988 GD5990 Hex Head Cap Screw, ½"3 x ½" Lock Washer, ½" Hex Nut, ½"3 Shaft, 36", Row 30"/36"/38" and 6 Row 30"/36"/38" Shaft, 7", 8 Row 30" GD3839 Coupler, " G060 Cotter Pin, ¼" x " 3 G060 Spring Pin, ¼" x ½" GD3 Handle 5 GD3 Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 6 GD933 Release Collar, R.H. 7 GA59 Sprocket Storage Rod 8 GD665 Plate, 8 Row 30" Only 9 G000 G387 G09 G00 Hex Head Cap Screw, ⅜"6 x ¼" Flat Washer, ⅜" SAE Lock Washer, ⅜" Hex Nut, ⅜"6 30 G078 Vinyl Cap 3 GD3 Sleeve, ¼" 3 G075 External Inverted Snap Ring, ⅞" 33 G096 External Inverted Snap Ring, ½" 3 GD7 Tightener Shaft, ⅞" A GK69 Lock Clamp Kit (Items and ) B GK378 Wrap Spring Wrench Replacement Kit, Blue Collar, R.H., (Items 7, 9, 6 and 336) Rev. / P30

134 Liquid Fertilizer Squeeze Pump, Row M0880 LFC0(PT6a) ITEM PART NO. QTY. DESCRIPTION GR06 Spring Anchor Bar GR0 Spring 3 G030 G386 G0 GR0 Plate 5 GR007 Nylon Bushing 6 G0303 G386 G0 Square Head Machine Bolt, 5 6"8 x ¾" Flat Washer, 5 6" SAE Wing Nut, 5 6"8 Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Wing Nut, 5 6"8 7 GR05 Metering Hose, ½" x 3" 8 G068 Hose Clamp, No. 6 9 G000 G00 Hex Head Cap Screw, ⅜"6 x ¼" Hex Nut, ⅜"6 0 GR03 Angle GR07 Manifold Plug GR03 Adapter 3 GR08 Intake Manifold GR8 Discharge Manifold Less Hose Barbs 5 G300 Hose, ⅜" x 30' 6 GR0 Rubber Cap 7 GR07 6 Nylon Washer 8 G03 Square Head Set Screw, 5 6"8 x ¾" 9 G060 Grease Fitting, ¼"8 0 GR03 Roller Arm GR009 3 Roller G078 Spring Pin, 5 6" x ⅛" 3 GD909 Sleeve GD907 Shaft 5 GR06 Shim, 3 6" 6 GR05 Shim, 3" 7 GR008 Frame 8 GR577 Nylon Hose Barb, ½" x ⅜" (If Applicable) A GA8690 Squeeze Pump Complete, Row (Items, 6 and 8) P3 Rev. 6/

135 M0880 Liquid Fertilizer Squeeze Pump, 6 Row LFC0/LFC0(PT7a) ITEM PART NO. QTY. DESCRIPTION GR06 Spring Anchor Bar GR0 Spring 3 G030 G386 G0 GR0 Plate 5 GR007 Nylon Bushing 6 G0303 G386 G0 Square Head Machine Bolt, 5 6"8 x ¾" Flat Washer, 5 6" SAE Wing Nut, 5 6"8 Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Wing Nut, 5 6"8 7 GR05 6 Metering Hose, ½" x 3" 8 G068 Hose Clamp, No. 6 9 G000 G00 Hex Head Cap Screw, ⅜"6 x ¼" Hex Nut, ⅜"6 0 GR03 Angle GR07 Manifold Plug GR03 6 Adapter 3 GR08 Intake Manifold GR8 Discharge Manifold Less Hose Barbs 5 G3003 Hose, ⅜" x 60' 6 GR0 Rubber Cap 7 GR09 6 Nylon Washer 8 GR66 6 Bushing 9 G03 Square Head Set Screw, 5 6"8 x ¾" 0 G060 8 Grease Fitting, ¼"8 GR03 Roller Arm GR033 3 Roller 3 G078 Spring Pin, 5 6" x ⅛" GD909 Sleeve 5 GD907 Shaft 6 GR06 Shim, 3 6" 7 GR05 Shim, 3" 8 GR008 Frame 9 GR577 6 Nylon Hose Barb, ½" x ⅜" (If Applicable) A GA869 Squeeze Pump Complete, 6 Row (Items 3, 5 and 59) Rev. 6/ P3

136 Liquid Fertilizer Squeeze Pump, 8 Row M0880 ITEM PART NO. QTY. DESCRIPTION GR0 Spring Anchor Bar GR0 8 Spring 3 G030 G386 G0 GR0 Plate 5 GR007 Nylon Bushing 6 G0303 G386 G0 Square Head Machine Bolt, 5 6"8 x ¾" Flat Washer, 5 6" SAE Wing Nut, 5 6"8 Carriage Bolt, 5 6"8 x " Flat Washer, 5 6" SAE Wing Nut, 5 6"8 7 GR05 8 Metering Hose, ½" x 3" 8 G068 Hose Clamp, No. 6 9 GR03 8 Adapter 0 G000 G00 Hex Head Cap Screw, ⅜"6 x ¼" Hex Nut, ⅜"6 GR079 GR080 Angle, L.H. Angle, R.H. GR07 Manifold Plug 3 GR08 Intake Manifold GR85 Discharge Manifold Less Hose Barbs 5 G300 Hose, ⅜" x 00' 6 GR0 Rubber Cap 7 GR09 6 Nylon Washer 8 GR66 6 Bushing 9 G03 Square Head Set Screw, 5 6"8 x ¾" 0 G060 8 Grease Fitting, ¼"8 GR03 Roller Arm GR083 3 Roller 3 GR08 Set Collar GR08 Back Up Roller 5 G078 Spring Pin, 5 6" x ⅛" 6 GD909 Sleeve 7 GD908 Shaft 8 GR06 Shim, 3 6" 9 GR05 Shim, 3" 30 GR0 Frame 3 GR577 8 Nylon Hose Barb, ½" x ⅜" (If Applicable) A GA869 Squeeze Pump Complete, 8 Row (Items, 6 and 73) P33 Rev. 6/

137 M0880 Liquid Fertilizer Tube In Furrow (A88a) ITEM PART NO. QTY. DESCRIPTION GA88 Liquid Fertilizer Tube GD338 Insulated Clamp, /6" Rev. /6 P3

138 Decals, Paint, and Miscellaneous M0880 Part No.: GD99 Description: SMV Sign Quantity: Conventional Row Marker Low Profile Row Marker Part No.: G700 Description: Decal, Warning (Prior to 0 Production) Quantity: ( Per Row Marker) WARNING CAUTION Row marker can lower at any time and could cause death or serious injury. Stay away from row markers! Install safety lockup device when not in use. Conventional Row Marker Low Profile Row Marker Part No.: G Description: Decal, Warning (0 Production and on) Quantity: (Per Row Marker Cylinder Conventional) ( Per Row Marker) P35 Rev. 6/

139 M0880 Decals, Paint, and Miscellaneous G70059 Front Side G70058 Top G70060 Bottom Part No.: G70058 Description: Reflective Decal, Red, ½" x 9", Rectangular Quantity: ( Per Row Marker) (If Applicable) Part No.: G70059 Description: Reflective Decal, Amber, ½" x 9", Rectangular Quantity: ( Per Row Marker) Part No.: G70060 Description: Reflective Decal, Orange, ½" x 9", Rectangular Quantity: ( Per Row Marker) Part No.: G7006 Description: Reflective Decal, Red, ¾" x 9", DieCut Quantity: (One per row unit located on the hopper support on the outside row unit on each end of the planter) (if applicable) G7006 G70063 Part No.: G70063 Description: Reflective Decal, Orange, ¾" x 9", DieCut Quantity: (One per row unit located on the hopper support on the second row unit in on each end of the planter) (if applicable) G70058 G70060 Part No.: G70058 Description: Reflective Decal, Red, ½" x 9", Rectangular Quantity: (One per row unit located on the granular chemical hopper panel extension on the outside row unit on each end of the planter) (If applicable) NOTE: Exceptions to above are 8 Row 30" planters. Red reflective decals are used on, 3, 6, and 8 row units. Orange reflective decals are used on,, 5, and 7 row units. (If Applicable) Part No.: G70060 Description: Reflective Decal, Orange, ½" x 9", Rectangular Quantity: (One per row unit located on the granular chemical hopper panel extension on the second row unit in on each end of the planter) (if applicable) Rev. 6/ P36

140 Decals, Paint, and Miscellaneous M0880 Part No.: G7006 (used prior to 03 production) Description: Decal, Warning Quantity: Part No.: G70090 (used prior to 03 production) Description: Decal, Warning Quantity: Part No.: G70030 (used prior to 03 production) (replaced by G700393) Description: Decal, Warning Quantity: WARNING Loss of control can cause death or serious injury, or damage to property and equipment. Tow only with farm tractor weight rated and configured for this equipment. Use safety chains and transport as specified in the Operator and Parts Manual. Part No.: G (replaces G70030) (03 production Description: Decal, Warning Quantity: P37 Rev. 6/

141 M0880 Decals, Paint, and Miscellaneous Part No.: G7007 Description: Decal, Warning (Prior to 0 Production) Quantity: (Per Contact Wheel Assembly) G7007 or G WARNING Uncontrolled machine movement can crush resulting in death, serious injury, or damage to property and equipment. Install safety lockup devices before working under or transporting this equipment. Part No.: G Description: Decal, Warning (0 Production and on) Quantity: (Per Contact Wheel Assembly) 9 Part No.: G70089 (used prior to 03 production) (replaced by G7000) Description: Decal, Danger Quantity: (Per Contact Wheel Assembly) 7000 WARNING Uncontrolled movement of planter components can cause death, serious injury, or damage to property and equipment. Raise planter and install cylinder lockups before folding. Fold on level ground. Install wing safety latches before towing. Part No.: G7000 (03 production and on) (replaces G70089) Description: Decal, Warning Quantity: (Per Contact Wheel Assembly) Rev. 6/ P38

142 Decals, Paint, and Miscellaneous M0880 Part No.: G7005 (used prior to 03 production) (replaced by G70038) Description: Decal, Warning Quantity: ( Per Row Unit Located On Underside Of Granular Chemical Hopper Lid) WARNING Agricultural chemicals can cause death or serious injury to persons, animals, and plants or seriously damage soil, equipment, and property. Read and follow all chemical and equipment manufacturer labels and instructions. Part No.: G70038 (03 production and on) (replaced by G7005) Description: Decal, Warning Quantity: ( Per Row Unit Located On Underside Of Granular Chemical Hopper Lid) Part No.: G7009 Description: Decal, Caution (Prior to 0 Production) Quantity: (Located On Interplant Push Row Unit Lift Lever) CAUTION Improper lifting of row unit can cause serious injury. An empty row unit requires minimum 90 lb (0.8 kg) lift. Set down pressure springs to minimum, lower planter to ground, and empty seed hopper before attempting to lift with this lever. Part No.: G Description: Decal, Caution (0 Production and on) Quantity: (Located On Interplant Push Row Unit Lift Lever) P39 Rev. 6/

143 M0880 Decals, Paint, and Miscellaneous WARNING KEEP CLEAR OF MECHANISM AT ALL TIMES G70055 or G Part No.: G70053 (used prior to 03 production) (replaced by G700390) Description: Decal, Warning Quantity: (Located On Interplant SelfLeveling Hitch Extension) WARNING Moving parts can pinch or crush and cause serious injury. Keep away at all times! Part No.: G (03 production and on) (replaces G700 53) Description: Decal, Warning Quantity: (Located On Interplant SelfLeveling Hitch Extension) Part No.: G70055 Description: Decal, Warning (Prior to 0 Production) Quantity: (Located On Interplant Lift Cylinder Lockup) WARNING Uncontrolled machine movement can crush resulting in death, serious injury, or damage to property and equipment. Install safety lockup devices before working under or transporting this equipment. Part No.: G Description: Decal, Warning (0 Production and On) Quantity: (Located On Interplant Lift Cylinder Lockup) Part No.: GD6 Description: Tie Strap, 8" Part No.: GD5 Description: Tie Strap, 7½" Part No.: GD7 Description: Tie Strap, ½" Part No.: GD98 Description: Tie Strap, 3" Part No.: G70095 Description: Decal, Spring Tension Release Quantity: Rev. 6/ P0

144 Decals, Paint, and Miscellaneous M0880 fi Part No.: G7000 Description: Decal, KINZE, 3" x " Quantity: Part No.: G70008 Description: Decal, Interplant Quantity: Part No.: G7007 Description: Decal, Logo, ⅜" x ½" Quantity: (Per Row Unit) Part No.: G7005 Description: Decal, Logo, 3½" x 3⅝" (Hopper Panel Extension) Quantity: Part No.: G70060 Description: Decal, Double Frame Quantity: Part No.: G70038 Description: Decal, 3000 Quantity: G7007 G WARNING Improper operation or servicing of this equipment can result in death or serious injury. Read and follow all instructions in the Operator and Parts Manual. Contact your Kinze dealer or go to to order a replacement manual. TORQUE 5/8" SPINDLE BOLTS TO 0 FT/LBS. (6.7 Nm). CHECK PERIODICALLY AND RETORQUE AS NEEDED. Part No.: G7007 (used prior to 03 production) (replaced by G700387) Description: Decal, Note Quantity: Part No.: G (03 production and on) (replaces G700 7) Description: Decal, Warning Quantity: Part No.: G7003 Description: Decal, Bolt Torque Quantity: Part No.: G700 Description: Decal, Transmission Quantity: P Rev. 6/

145 M0880 Decals, Paint, and Miscellaneous USE TABLESPOON (.78mL) POWDERED GRAPHITE WITH EACH HOPPER FILL OF SEED. SEED TREATMENT, FOREIGN MATERIAL, DIRT OR SEED CHAFF MAY CAUSE GRADUAL REDUCTION OF SEED POPULATION. REFER TO MANUAL FOR MAINTENANCE AND CARE. Part No.: G70053 Description: Decal, Information Quantity: Per BrushType Seed Meter Part No.: G700 Description: Decal, Oil Daily Quantity: Part No.: G7006 Description: Decal, Grease Daily Quantity: Part No.: GR055 Description: Blue Paint, Aerosol Can Part No.: GR055MPP Description: Blue Paint, Twelve Aerosol Cans Part No.: GR06 Description: Powdered Graphite, Pound Container Part No.: GR06MPP Description: Powdered Graphite, TwentyFour Pound Containers Part No.: GR570MPP Description: Talc Lubricant, Four 8 Pound Containers Part No.: GR88 Description: Talc Lubricant, 30 Pound Container Part No.: GR8MPP Description: Graphite Lubricant, Four 5 Pound Containers Rev. / P

146 Decals, Paint, and Miscellaneous M0880 Part No.: G7009 Description: Decal, KINZE 3000 (Prior to 0 production) Quantity: ( On Each Side of Hitch) Part No.: G Description: Decal, KINZE 3000 (0 production and on) Quantity: ( On Each Side of Hitch) Part No.: GM0880 Description: Operator Manual, (Mechanical Seed Metering) Part No.: GM0880 Description: Parts Manual, (Mechanical Seed Metering) Part No.: GPR09 Description: Binder (Contact Kinze Parts To Order) Part No.: GA5 Description: Operator s Manual Canister Quantity: Part No.: GD685 Description: Manual Canister Bracket Quantity: Part No.: GD69 Description: UBolt, ¾" x ¾" x ⅜"6 Quantity: Part No.: G09 Description: Serrated Flange Nut, ⅜"6 Quantity: Part No.: G66 Description: Hex Socket Flange Cap Screw, ¼"0 x ¾" Quantity: 3 Part No.: G06 Description: Serrated Flange Nut, ¼"0 Quantity: 3 Part No.: G7008 Description: Decal, American Flag P3 Rev. 5/