KPM III Electronic Seed Monitor...P112. KPM II Stack-Mode Electronic Seed Monitor...P112

Transcription

1 PARTS LIST INDEX ROW UNIT 15" Seed Opener Disc Blade/Bearing Assembly And Scrapers...P5 Brush-Type Seed Meter...P25 Coulter Mounted Residue Wheels...P36 Finger Pickup Seed Meter...P24 Frame Mounted Coulter W/Residue Wheels...P38 Gauge Wheels...P6 Granular Chemical Banding Options...P29 Granular Chemical Hopper And Hopper Panel Extension...P26 Granular Chemical Meter And Meter Drive...P28 Hopper Support And Meter Drive...P9 Mini-Hopper And Drop Hoses (SDS Planters)...P10 Parallel Arms, Mounting Support Plate And Quick Adjustable Down Force Springs...P4 Row Unit Mounted Disc Furrower...P32 Row Unit Mounted No Till Coulter...P30 Row Unit Mounted Residue Wheel...P34 Seed Hopper And Lid (Conventional Planters)...P11 Shank Assembly, Seed Tube And Depth Adjustment...P2 V Closing Wheels...P8 BASE MACHINE 2-Point Hitch Option...P44 Auxiliary Work Lights Package...P108 Axle Steps...P51 Center Frame...P56 Center Pivot...P60 Contact Wheel And Drive Shaft(s)...P62 Cylinders...P81 Electrical Components...P104 Ground Drive Wheel...P65 Hose Take-Up...P54 Hydraulic Hoses And Fittings...P100 Inner Hitch/Undercarriage Assembly...P46 Inner Module Drive...P68 Outer Hitch...P42 Point Row Clutch...P70 Row Marker Assemblies...P76 Row Marker Spindle/Hub/Blade...P80 Safety Chain...P42 Seed Rate Transmission And Row Unit Drill Shafts...P66 Stabilizer Assembly...P52 Transport Wheels...P50 Two-Speed Point Row Clutch...P72 Two-Speed Point Row Clutch Wheel Module Extension...P74 Valve Blocks...P91 Valves (Solenoid, Flow Control, Pressure Relief, Check)...P97 Wing Frame...P58 SDS SEED DELIVERY SYSTEM Bulk Seed Hopper Elevator Lift Assembly...P14 Bulk Seed Hopper And Hydraulic Motor Drive...P16 Bulk Seed Hopper And Auger Assemblies...P22 Bulk Seed Hopper Auger Manifold Assembly...P20 Bulk Seed Hopper Catwalk...P12 Bulk Seed Hopper Lid...P18 Bulk Seed Hopper Monitor Components...P114 ELECTRONIC SEED MONITOR KPM I Electronic Seed Monitor...P110 KPM II Stack-Mode Electronic Seed Monitor...P112 KPM III Electronic Seed Monitor...P112 INTERPLANT SYSTEM Interplant Push Row Unit...P40 Interplant Push Row Unit Drive...P116 FERTILIZER Openers, Mounts And Attachment...P118 Liquid Fertilizer...P128 Rear Trailer Hitch...P144 Decals, Paint And Miscellaneous...P146 Numerical Index...P149 P Rev. 11/07 6/05

2 SHANK ASSEMBLY, SEED TUBE AND DEPTH ADJUSTMENT (METR29cc) P2 Rev. 11/06 6/05

3 SHANK ASSEMBLY, SEED TUBE AND DEPTH ADJUSTMENT (Per Row) 1. G Hex Washer Head Cap Screw, ⅜"-16 x 1 ¼" 2. GB Cover, Depth Adjustment 3. GB Handle, Depth Adjustment 4. GB Lever, Depth Adjustment 5. GD Cap Plug 6. GD Spring 7. GD Pin, ⅜" x 1 ⅔" 8. GD Sleeve, ⅜" I.D. x ⅝" O.D. x " Long 9. G Hex Head Cap Screw, ⅜"-24 x 2 ½", Grade 8 G Lock Nut, ⅜"-24, Grade C 10. G Chain, No. 41, 98 Pitch Including Connector Link GR Connector Link, No GD Sleeve, " Long 12. G Special Washer, ⅜" x 1 ½" O.D. 13. GD Idler Spring 14. GD Sleeve, 1" Long 15. G Lock Nut, ⅜" G Washer, ⅜" USS 17. GD Idler 18. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Nut, ⅜" GD Stop 20. G Hex Head Cap Screw, ⅜"-16 x 3 ¾" 21. G Clevis Pin, ¼" x 2 ½" G Hair Pin Clip, No G Carriage Bolt, 5 16"-18 x ¾" G Serrated Flange Nut, 5 16" GD Shield See Gauge Wheels, Pages P6 And P7 25. GA Shank W/Gauge Wheel Pivot Spindle And Set Screw GD Spindle G Hex Head Cap Screw, ½"-13 x ¾" 26. G Washer, ⅞" O.D. x 13 32" I.D. x.134" (If Applicable) 27. GD Dust Cap 28. See KPM I Electronic Seed Monitor And KPM II Stack-Mode/KPM III Electronic Seed Monitors, Pages P110-P GB Collar, Depth Adjustment 30. GB Pivot Link, Depth Adjustment 31. GD Sun Shade 32. G Carriage Bolt, ⅜"-16 x 3" G Lock Nut, ⅜" GD Sun Shade (Rubber) P3 Rev. 11/07 6/05

4 PARALLEL ARMS, MOUNTING SUPPORT PLATE AND QUICK ADJUSTABLE DOWN FORCE SPRINGS RUB021/RUB022(RU78f/RU79a) (Per Row) 1. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Mounting Support Plate 3. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 4. GD Upper Parallel Arm 5. G Hex Head Cap Screw, ⅝"-18 x 2" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GB Spring Anchor 7. GD Tab Lock Pin, 7 16" x 1 ½" 8. GD Spring 9. - See Hopper Support And Meter Drive, Page P9 10. GA Lower Parallel Arm 11. GA Bearing/Sprocket, ⅞" Hex Bore 12. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. G6325X - U-Bolt Package For 5" x 7" Toolbar, Includes: (2) GD1113, (4) G10230, (4) G10104 P4 Rev. 11/06 6/05

5 15" SEED OPENER DISC BLADE/BEARING ASSEMBLY AND SCRAPERS (RU139) (Per Row) 1. G Hex Head Cap Screw, ⅜"-16 x ⅝" G Serrated Flange Nut, ⅜" GA2012R 1 Disc Scraper, R.H. GA2012L - Disc Scraper, L.H. (Shown) 3. G Rivet, ¼" x ½" 4. GD Special Hex Head Cap Screw, ⅝"-11 x 1 ½", L.H. Threads G Hex Head Cap Screw, ⅝"-11 x 1 ½" 5. GD Dust Cap 6. G Special Machine Bushing, ⅝" x 1" O.D. 7. GD Bearing Housing 8. GA Bearing 9. GD Disc Blade, 3.5 mm x 15" 10. G Machine Bushing, ⅝" (.030" Thick)(As Required) See Shank Assembly, Pages P2 And P3 12. GB Seed Tube Guard/Inner Scraper 13. G Hex Socket Head Cap Screw, 5 16"-18 x 1", Grade G Hex Head Cap Screw, ⅜"-16 x 2 ¾" G Serrated Flange Nut, ⅜" GD Sleeve, ⅜" I.D. x ⅝" O.D. x " Long A. GA Disc Blade/Bearing Assembly, Less Dust Cap (Items 3 And 7-9) P5 6/05

6 GAUGE WHEELS (RU140) P6 6/05

7 GAUGE WHEELS (Per Row) 1. G Machine Bushing, 1" (.048" Thick) 2. G Washer, ½" USS 3. G Lock Washer, ½" 4. G Hex Head Cap Screw, ½"-13 x 1" 5. GD Cover 6. G Carriage Bolt, 5 16"-18 x 1 ¼" G Serrated Flange Nut, 5 16" G Carriage Bolt, 5 16"-18 x 1 ¾" G Serrated Flange Nut, 5 16" G Hex Head Cap Screw, ⅝"-11 x 3" G Lock Washer, ⅝" 9. G Hex Head Cap Screw, 5 16"-18 x ⅝" G Lock Nut, 5 16"-18, Grade GD Half Wheel 11. GD Tire 12. GA Bearing 13. G Special Machine Bushing, ⅝" x 1" O.D. 14. GA Wheel Arm W/Grease Fitting, Bushings And Seals, L.H. (Shown) GA Wheel Arm W/Grease Fitting, Bushings And Seals, R.H. G Grease Fitting, ¼"-28 (Per Arm) GB Bushing, 1" I.D. x 1 ¼" O.D. x 1" Long (Per Arm) GD Seal (Per Arm) See Shank Assembly, Pages P2 And P3 A. GA Gauge Wheel Complete (Items 5-7 And 9-12) B G1K296 - Gauge Wheel Arm Bushing And Seal Driver Kit, Includes: (1) Seal Driver, (1) Bushing Driver, (1) Instruction P7 Rev. 11/07 6/05

8 V CLOSING WHEELS (RU83i/RU83n) (Per Row) 1. G Carriage Bolt, ½"-13 x 2 ¼" G Carriage Bolt, ½"-13 x 2 ½" (Used W/Straight Drop In-Furrow Granular Chemical Bracket) G Lock Nut, ½" GB Wheel Arm Stop 3. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS 4. GB Stepped Bushing 5. GB Eccentric Bushing 6. GD Spring 7. G Hex Head Cap Screw, ¼"-20 x 1" 8. G Hex Head Cap Screw, ⅝"-11 x 3 ½" G Lock Nut, ⅝" G Lock Washer, ⅝" 10. GD Nylon Half Wheel 11. GA Bearing 12. GD Rubber Tire, 1" x 12" 13. GD Bushing, 41 64" I.D. x ⅞" O.D. x ¼" Long 14. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade GA Cast Iron Closing Wheel W/Bearing GA Bearing 16. GA Arm 17. GB Lever 18. GD Special Washer, ⅝", Hardened 19. G1K345 - Closing Wheel Shield Kit W/Hardware And Instruction G Carriage Bolt, ⅜"-16 x ¾" G Carriage Bolt, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. GA Rubber Closing Wheel Complete W/Bearing (Items 7 And 10-12) P8 Rev. 11/06 6/05

9 HOPPER SUPPORT AND METER DRIVE (METR22f) (Per Row) 1. GB Hopper Mount 2. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 3. G Hex Head Cap Screw, ⅝"-18 x 2 ¼" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" G Hex Head Cap Screw, ⅝"-18 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" G Spring Pin, ¼" x 1 ½" 6. G External Retaining Ring, ⅝" 7. GD Knob 8. G Carriage Bolt, 5 16"-18 x 1 ¼" G Serrated Flange Nut, 5 16" GB Clutch Adapter Plate 10. G Hex Head Cap Screw, ⅜"-16 x 3 ½" G Washer, ⅜" USS G Lock Nut, ⅜" G Carriage Bolt, ¼"-20 x ⅝", Grade 2 G Serrated Flange Nut, ¼" GA Hopper Hold Down Latch 13. GA Hopper Support 14. GA Double Sprocket And Bearing, Drive Clutch, 11/19 Tooth 15. GD Spring 16. GD Shaft 17. GB Coupler 18. G Spring Pin, 3 16" x 1 ¼" 19. GD Locking Clip Pin, ¼" x 2 ½" (SDS Only) 20. GD Retainer (SDS Only) A. GA Meter Drive Assembly, 11/19 Tooth (Items 5-7 And 14-18) P9 Rev. 11/06 6/05

10 MINI-HOPPER AND DROP HOSES (SDS Planters) RUB031(TWL189c) (Per Row) 1. GD Drop Hose, 3 ¼" x 34" GD Drop Hose, 3 ¼" x 30" GD Drop Hose, 3 ¼" x 36" GD Drop Hose, 3 ¼" x 37" GD Drop Hose, 3 ¼" x 39" 2. G T-Bolt Hose Clamp, 3 ¼" 3. GA Lid W/Gasket And View Cap GD Gasket G External Retaining Ring, 2 ⅞" (If Applicable) GD View Port Support (If Applicable) GD View Cap 4. G Thumbscrew, 5 16"-18 x 1" GD Seal 5. GA Mini-Hopper 6. GD Tie Strap, 14 ½" 7. GD Sleeve, 3" x 10" NOTE: See Bulk Seed Hopper Auger Manifold Assembly, Pages P20 and P21, for additional information. P10 Rev. 11/07 6/05

11 SEED HOPPER AND LID (Conventional Planters) (RU87a/RU87e) (Per Row) 1. GD Lid 2. GA Seed Hopper, Reinforced 3. GD Seed Reserve Baffle (Optional) P11 6/05

12 BULK SEED HOPPER CATWALK (TWL189f/D16509/TWL189ff/TWL189g) Style A Style B P12 Rev. 11/07 6/05

13 BULK SEED HOPPER CATWALK 1. GB Step 2. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD U-Bolt. 2" x 2" x ½"-13 G Washer, ½" SAE G Lock Nut, ½" GA Step Support, 20 ½", 12 Row 30" Only 5. GA Step Support, 20 ½", 12 Row 30" And 16 Row 30" GA Step Support, 26 ½", 12 Row 30" And 16 Row 30" 6. G Hex Head Cap Screw, ½"-13 x 3 ½" G Lock Nut, ½" GA Hitch Pin 8. GA Catwalk, 96", 12 Row 30" GA Catwalk, 61", 16 Row 30" 9. G Carriage Bolt, 5 16"-18 x 1 ¼" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" GD Plate, 6 ½" x 11 ⅞", 12 Row 30" And 16 Row 30" 11. GA Catwalk, 53", R.H., 12 Row 30" And 16 Row 30" GA Catwalk, 53", L.H., 12 Row 30" And 16 Row 30" (Shown) 12. GA Center Catwalk, 25", 12 Row 30" And 16 Row 30" 13. G Detent Pin, ½" x 3 ½" Grip 14. GD Plate 15. GA Step Support, 26 ½", 12 Row 30" Only 16. GA Step Support, 26 ½", 12 Row 30" And 16 Row 30" 17. GA Hinge Weld, 12 Row 30" Only 18. GA Step Support Weld 19. G Hex Head Cap Screw, ½"-13 x 1 ½" GD Washer G Lock Nut, ½"-13 P13 Rev. 11/07 6/05

14 BULK SEED HOPPER ELEVATOR LIFT ASSEMBLY (TWL299/TWL299b/TWL258a) L.H. Side Of Planter Shown P14 Rev. 11/07 6/05

15 BULK SEED HOPPER ELEVATOR LIFT ASSEMBLY (Per Hopper) 1. GA Outer Cover 2. GA Elevator Chain Assembly G1K398 - Elevator Bucket W/Connector Links GR Connector Link, No GA Sprocket, 15 Tooth 4. GD Hex Shaft, ⅞" x 4 ¼" (2 Holes) 5. G Hex Head Cap Screw, ⅜"-16 x ¾" G Washer, ⅜" USS G Serrated Flange Nut, ⅜" GD Guide (R.H. Side Only)(Shown) 7. GD Mount, L.H. (Shown) GD Mount, R.H. 8. G Chain, No. 40, 72 Pitch Including Connector Link GR Connector Link, No G Hex Head Cap Screw, ¾"-16 x ⅝" G Washer, ⅜" USS 10. GD Guide (L.H. Side Only) 11. GD Wear Pad 12. G Hex Socket Head Cap Screw, ¼"-20 x ½" G Serrated Flange Nut, ¼" G Lock Nut, ½"-13 G Washer, ½" USS 14. GA Bearing, ⅞" Hex Bore 15. G Hex Head Cap Screw, 5 16"-18 x ⅝" G Lock Washer, 5 16" 16. G Flangette 17. GD Overlay 18. GA Inner Cover 19. G Spring Pin, ¼" x 1 ½" 20. GA Inner Profile, 14 ⅝" 21. GD Special Sprocket, 17 Tooth 22. G Hex Head Adjusting Bolt, ½"-13 x 4", Grade 2 G Hex Jam Nut, ½"-13, Grade GB Sprocket, 11 Tooth 24. GA Sprocket, 23 Tooth 25. GD Drive Plate 26. GB Idler 27. GA Drive Plate, L.H. (Shown) GA Drive Plate, R.H. 28. GD Hex Shaft, ⅞" x 8 ⅜" (2 Holes) 29. G Machine Bushing, 1", 10 Gauge 30. GD Access Overlay 31. GA Sprocket W/Bearing, 18 Tooth 32. GD Sleeve, ½" I.D. x ⅝" Long 33. G Carriage Bolt, ½"-13 x 2 ½" G Washer, ½" SAE G Lock Washer, ½" G Hex Nut, ½" GD Lock Wire, 10", Stainless Steel 35. GA Spacer W/Bearing GA Bearing, ⅞" Hex Bore, Cylindrical 36. GD Spacer 37. GD Special Washer 38. G Cotter Pin, ¼" x 1 ½" 39. GA Shaft Assembly W/Spring Pin, 14 ½" G Spring Pin, 5 16" x 1 ¼" 40. G Machine Bushing, 1", 10 Gauge 41. G Spring Pin, 5 16" x 1 ¼" P15 Rev. 11/07 6/05

16 BULK SEED HOPPER AND HYDRAULIC MOTOR DRIVE (TWL300/TWL190h/TWL190e) R.H. Side Of Planter - 12 Row 30" Shown 16 Row 30" (Per Hopper) 1. GD Cover, R.H. GD Cover, L.H. 2. G Machine Bushing, 1", 10 Gauge 3. GA Idler W/Sprocket And Hardware (Shown) GA Idler W/Sprocket And Hardware GA Sprocket W/Bearing, 18 Tooth G Hex Head Cap Screw, ½"-13 x 1 ½" G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade 2 4. G Spring Pin, ¼" x 1 ½" 5. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" 6. G Chain, No. 40, 88 Pitch Including Connector Link GR Connector Link, No GA Sprocket, 20 Tooth 8. GD Lock Wire, 10", Stainless Steel 9. G Carriage Bolt, 5 16"-18 x ¾" G Flange Nut, 5 16"-18, No Serration 10. G Flangette 11. GA Bearing, ⅞" Hex Bore 12. GA Hydraulic Motor GR Seal Kit (Eaton), Includes: (6) Seals, (1) BU Ring, (3) O-Rings, (7) Seal Washers GR Seal Kit (TCI), Includes: (2) Seals, (1) Ring, (4) O-Rings 13. GD Lock Clamp 14. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 15. GD Hex Shaft, ⅞" x 7 ¾" (2 Holes) 16. G Spring Pin, ¼" x 2" See Bulk Seed Hopper And Auger Assemblies, Pages P22 And P GD Plate, 1 ½" x 2 ½" 19. GD Tube, 1" O.D. x 137", 12 Row 30" GD Tube, 1" O.D. x 207 ½", 16 Row 30" 20. G Hex Head Cap Screw, ⅜"-16 x 1" G Serrated Flange Nut, ⅜"-16 P16 Rev. 11/06 6/05

17 BULK SEED HOPPER AND HYDRAULIC MOTOR DRIVE (Per Hopper) 21. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Flange Nut, ⅜" GD Coupler, 3 ¼" 23. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ⅝"-11 x 4" G Hex Nut, ⅝"-11 G Lock Nut, ⅝" GA Sprocket, 40 Tooth 26. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Special Washer, ⅜" x 1 ½" O.D. G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1" G Serrated Flange Nut, ⅜" GD Spring 30. G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" 31. G Flange Nut, ⅜"-16 G Hex Head Cap Screw, ⅜"-16 x 1" 32. GA Hopper Mount, L.H. GA Hopper Mount, R.H. 33. GD Tie Plate 34. GD Sleeve, 1" 35. G Grease Fitting, 90, ¼" GD Pin, 1 ¼" x 26" 37. G Cotter Pin, ¼" x 2" 38. G Special Washer, 1 ¼" 39. GA Link, 52" 40. GD Bearing Housing 41. GA Bearing 42. GA End Cap 43. G Hex Head Cap Screw, ¼"-20 x ⅝" G Lock Nut, ¼"-20, Grade B 44. GD Dust Cap 45. GA Inner Profile, 5 ½" G Washer, ⅝" SAE G Lock Nut, ⅝" G Hex Head Cap Screw, ⅞"-9 x 4" G Washer, ⅞" USS 47. GD Sleeve, 1 ¼" O.D. x 3 ⅛" Long 48. G Hex Head Cap Screw, ⅜"-16 x 1 ¾" G Lock Nut, ⅜" GD Plate, 4" x 6" 50. GB Plate 51. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Lock Nut, ⅜" G Grease Fitting, ¼" GD Pin, 1 ¼" x 20" 55. GD Plate 56. GA Mount 57. GD Pin, 1 ¼" x 20 ½" 58. GA Link, 15", 12 Row 30" 59. G Spring Pin, 5 16" x 2 ¼" 60. G Hex Head Cap Screw, ⅞"-9 x 4 ½" G Washer, ⅞" USS 61. GD Bar, 1" x 8" 62. GD Hex Shaft, ⅞" x 12" 63. G Hex Head Cap Screw, ½"-13 x 2" G Lock Washer, ½" G Washer, ½" USS 64. GB Link, 18", 16 Row 30" 65. GD Pin, 1 ¼" x 26 ½" 66. GD Pipe, 1 ¼" x 10" 67. G1K338 1 Hopper Cover Kit, 12 Row 30", Includes: (1) L.H. Bulk Seed Hopper Cover, (1) R.H. Bulk Seed Hopper Cover G1K339 1 Hopper Cover Kit, 16 Row 30", Includes: (1) L.H. Bulk Seed Hopper Cover, (1) R.H. Bulk Seed Hopper Cover 68. GD Sleeve, 2 ¼" Long 69. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Washer, ⅝" USS A. GA Bearing Cap Assembly (Items 40-45) P17 Rev. 11/06 6/05

18 BULK SEED HOPPER LID (TWL257) L.H. Side Of Planter Shown P18 Rev. 11/06 6/05

19 BULK SEED HOPPER LID (Per Hopper) 1. G Carriage Bolt, 5 16"-18 x ¾" G Lock Nut, 5 16"-18, Grade 8 2. GA Hopper Lid, R.H., 12 Row 30" GA Hopper Lid, L.H., 12 Row 30" GA Hopper Lid, R.H., 16 Row 30" GA Hopper Lid, L.H., 16 Row 30" 3. G Hex Head Cap Screw, ½"-13 x 6 ½" G Washer, ½" USS G Washer, ⅝" USS G Lock Nut, ½" GD Sleeve, 5 ⅜" Long 5. GD Splash Guard Strip, 12 Row 30" GD Splash Guard Strip, 16 Row 30" 6. GD Hinge Tab 7. G Carriage Bolt, ⅜"-16 x 1 ½" G Washer, ⅜" USS G Lock Nut, ⅜" GD Hinge Plate 9. G Hex Head Cap Screw, 5 16"-18 x ¾" G Washer, 5 16" USS G Lock Nut, 5 16"-18, Grade GD Bracket 11. GD Brace 12. G Hex Head Cap Screw, 5 16"-18 x 1" G Washer, 5 16" USS G Flange Nut, 5 16"-18, No Serration 13. GD Brace, 16 Row 30" Only 14. GD Spring Anchor See Bulk Seed Hopper And Auger Assemblies, Pages P22 And P G Lock Nut, 5 16"-18, Grade GD U-Bolt, 2" x 6" x ⅜"-16 G Lock Nut, ⅜" GA Gas Spring, 134 Pounds 19. GA Latch 20. GD Locking Clip Pin, ¼" x 2 ½" 21. G Carriage Bolt, ⅜"-16 x 1" G Flange Nut, ⅜" GD Retainer, 1" x 3" 23. GD Retainer, 1" x 18" P19 Rev. 11/06 6/05

20 BULK SEED HOPPER AUGER MANIFOLD ASSEMBLY L.H. Side Of Planter Shown (TWL261aa) P20 Rev. 11/06 6/05

21 BULK SEED HOPPER AUGER MANIFOLD ASSEMBLY (Per Hopper) 1. GD Clamp 2. G Cap, 3" 3. GD Funnel, Top 4. GA Funnel, Bottom 5. G Phillips Pan Head Machine Screw, No GA Handle 7. GA Latch 8. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Serrated Flange Nut, ⅜" GD Bracket 10. GD Distribution Manifold, 140", L.H., 12 Row 30" GD Distribution Manifold, 140", R.H., 12 Row 30" GD Distribution Manifold, 210 ½", L.H., 16 Row 30" GD Distribution Manifold, 189", R.H., 16 Row 30" 11. GD Tap Block, 1" x 4" 12. G Hex Head Cap Screw, 5 16"-18 x ¾" G Lock Nut, 5 16"-18, Grade GB Nut, 3 ¼" GB Nipple 15. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Flange Nut, ⅜" GD Clamp 17. GD Baffle, L.H. 18. GD Tie Bar 19. GD Baffle, R.H. 20. G Hex Head Cap Screw, ⅝"-11 x 3" G Washer, ⅝" USS G Lock Washer, ⅝" See Bulk Seed Hopper And Hydraulic Motor Drive, Pages P16 And P GD Baffle, L.H. 23. GD Baffle 24. GD Baffle 25. GD Tie Plate, 16 Row 30" 26. GD Tunnel Cover 27. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS G Flange Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 3 ½" G Washer, ½" USS G Lock Nut, ½" GA Support 31. GA Support Tube, 140 ½", 12 Row 30" GA Support Tube, 211", 16 Row 30" 32. GD Shim, 1 ⅜" x 5 ⅜", 10 Gauge (As Required) GD Shim, 1 ⅜" x 5 ⅜", ¼" Thick (As Required) 33. GD Baffle Plate, R.H. 34. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS G Serrated Flange Nut, ⅜" GD Locking Clip Pin, ¼" x 2 ½" 36. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS G Flange Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 1 ½" G Hex Nut, ½" GA Drop Tube 39. GD Plate 40. G Hex Head Cap Screw, 5 16"-18 x 1" G Flange Nut, 5 16"-18, No Serration P21 Rev. 11/06 6/05

22 BULK SEED HOPPER AND AUGER ASSEMBLIES (TWL259b) L.H. Side Of Planter Shown P22 Rev. 11/06 6/05

23 BULK SEED HOPPER AND AUGER ASSEMBLIES (Per Hopper) 1. GD Cover 2. - See Bulk Seed Hopper Elevator Lift Assembly, Pages P14 And P15 3. G Hex Head Cap Screw, 5 16"-18 x ½" G Washer, 5 16" USS 4. GD Cover 5. GA Top Auger, L.H., 147 ½", 12 Row 30" GA Top Auger, R.H., 147 ½", 12 Row 30" GA Top Auger, L.H., 217 ½", 16 Row 30" GA Top Auger, R.H., 217 ½", 16 Row 30" 6. GD Flange 7. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" 8. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Nut, ⅜" GD Cover 10. G Washer, ⅝" USS G Lock Washer, ⅝" G Hex Nut, ⅝" GA Cover 12. GD Plate, 1 ¼" x 4 ¾" 13. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Serrated Flange Nut, ⅜" GA Floor Auger, L.H., 144 ¾", 12 Row 30" GA Floor Auger, R.H., 144 ¾", 12 Row 30" GA Floor Auger, L.H., 215 ¼", 16 Row 30" GA Floor Auger, R.H., 215 ¼", 16 Row 30" 15. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Nut, ⅜" GD Stud, ⅝"-11 x 2 ¾" 17. G Hex Head Cap Screw, ⅜"-16 x 1" G Flange Nut, ⅜" GD Tie Plate 19. GD Inner Hopper Section, R.H., 12 Row 30" And 16 Row 30" GD Outer Hopper Section, R.H., 12 Row 30" And 16 Row 30" GD Inner Hopper Section, L.H., 12 Row 30" And 16 Row 30" GD Outer Hopper Section, L.H., 12 Row 30" And 16 Row 30" GD Center Hopper Section, R.H. And L.H., 16 Row 30" 20. GA Mount 21. GA Screen 22. G Hex Head Cap Screw, 5 16"-18 x ⅝" G Lock Washer, ⅜" 23. GD Rubber Baffle See Item 26 On Pages P16 And P GD Flange P23 Rev. 11/06 6/05

24 FINGER PICKUP SEED METER RUA015/RUA056/RUA057(RU13k/RU13d) Left Rear View Of Complete Meter (Per Row) 1. G Spring Pin, ¼" x 1 ½" 2. G Spring Pin, 3 16" x 1 ½" 3. GD Housing Cover 4. GD Belt Drive Sprocket 5. GD Seed Belt 6. GA Bearing 7. GA Conveyor Housing 8. GB Bearing Housing 9. GR Carrier Plate W/Brush And Screw GA Brush G Rolling Thread Screw, No. 10 x ¾" 10. G Slotted Hex Washer Head Screw, No x ⅝" 11. GD Finger, Corn 12. GD Spring 13. GB Cam 14. GD Finger Holder 15. G Cotter Pin, 5 32" x 1" 16. G Locking Thumbscrew, 5 16"-18 x ¾" 17. GD Seed Baffle 18. GD Cover Nut 19. G Jam Nut, ⅝"-18 UNF 20. GA Wave Washer, ⅝" (Triple Wave) 21. G Hex Head Cap Screw, ¼"-20 x ⅝" G Hex Flange Nut, ¼"-20, No Serrations 22. G Hex Head Cap Screw, ¼"-20 x ½" G Serrated Flange Nut, ¼" G Hex Head Cap Screw, ¼"-20 x 1 ½" G Serrated Flange Nut, ¼" G Spring Pin, ¼" x 1 ¼" 25. GD Idler 26. GB Bushing, 17 64" I.D. x " Long 27. GD Finger, Oil Sunflower 28. GD Shank Cover, Finger Pickup Seed Meter 29. GD Half Rate Blank Finger A. GR Finger Assembly, Corn (Items And 20) B. GR Finger Assembly, Oil Sunflower (Items 12-14, 20 And 27) P24 Rev. 11/07

25 BRUSH-TYPE SEED METER RUA037/RUA056/RUA057(RU14f) Left Rear View Of Complete Meter Used W/ Soybean And Cotton Discs Used W/ Milo/Grain Sorghum Discs 3 / 4 " 3 / 8 " (Per Row) 1. G Locking Thumbscrew, 5 16"-18 x ¾" 2. GA Housing W/Bearing GA Bearing 3. GA Hub W/Shoulder Bolts GD Shoulder Bolt, ¼"-20 (2 Used) 4. G Spring Pin, ¼" x 1 ¼" 5. G Spring Pin, ¼" x 1 ½" 6. GD Wear Strip 7. GA Upper Brush 8. GD Upper Brush Retainer (Used W/Soybean And Cotton Discs) 9. GA Lower Brush 10. GA Seed Disc, Soybean, 60 Cell, Black Color-Coded GA Seed Disc, Specialty Soybean, 48 Cell, Dark Blue Color-Coded GA Seed Disc, Cotton, Acid-Delinted, 30 Cell, White Color-Coded GA Seed Disc, Large Cotton, Acid-Delinted, 36 Cell, Tan Color-Coded GA Seed Disc, High-Rate Cotton, Acid-Delinted, 48 Cell, Light Green Color-Coded GA Seed Disc, Hill-Drop Cotton, Acid-Delinted, 12 Cell, Brown Color-Coded GA Seed Disc, Small Hill-Drop Cotton, Acid-Delinted, 12 Cell, Dark Green Color-Coded 11. G Wing Nut W/Nylon Insert, ¼" G Hex Washer Head Screw, No x ½" G Slotted Tap Screw, No x ⅝" (Use As Required) 13. GD Cover 14. GD Shank Cover, Brush-Type Seed Meter 15. GA Seed Disc, Small Milo/Grain Sorghum, 30 Cell, Red Color-Coded GA Seed Disc, Large Milo/Grain Sorghum, 30 Cell, Light Blue Color-Coded GA Seed Disc, High-Rate Small Milo/Grain Sorghum, 60 Cell, Red Color-Coded GA Seed Disc, High-Rate Large Milo/Grain Sorghum, 60 Cell, Yellow Color-Coded 16. GD Upper Brush Retainer (Used W/Milo/Grain Sorghum Discs) P25 Rev. 11/06 6/05

26 GRANULAR CHEMICAL HOPPER AND HOPPER PANEL EXTENSION (METR14d) P26 6/05

27 GRANULAR CHEMICAL HOPPER AND HOPPER PANEL EXTENSION (Per Row) 1. G Washer, ⅜" USS 2. GD Sleeve, 9 16" Long 3. GD Spring 4. G Special Washer, ⅜" x 1 ½" O.D. 5. GD Sleeve, " Long 6. GD Idler 7. G Lock Nut, ⅜" G Hair Pin Clip, No GD1059L 1 Support, L.H. (Shown) GD1059R 1 Support, R.H. 10. G Hex Head Cap Screw, ⅜"-16 x ¾" G Lock Washer, ⅜" 11. G Carriage Bolt, 5 16"-18 x ¾" G Serrated Flange Nut, 5 16" G Hex Head Cap Screw, ⅜"-16 x 2 ¾" 13. G External Retaining Ring, ⅝" 14. GD Plate 15. A Hopper Panel Extension (Non-Stock Item) (Sub Wholegoods Order Code ) 16. GD Block 17. G Hex Head Cap Screw, ¼"-20 x ¾" G Serrated Flange Nut, ¼" GD Hinge 19. GA Hopper 20. GA Lid 21. GD Knob 22. G Spring Pin, ¼" x 1 ½" P27 6/05

28 GRANULAR CHEMICAL METER AND METER DRIVE RUA051/RUB028(RU91a) (Per Row) 1. G External Retaining Ring, ⅝" 2. GD Knob 3. G Spring Pin, ¼" x 1 ½" 4. - See Granular Chemical Hopper And Hopper Panel Extension, Pages P26 And P27 5. GA Sprocket And Bearing, Drive Clutch, 24 Tooth 6. GD Spring 7. GD Shaft 8. GB Coupler 9. G Spring Pin, 3 16" x 1 ¼" 10. GD Shaft 11. G Hex Socket Head Cap Screw, No x ⅞" G Lock Washer, No GD Feed Roller, Hex Bore 13. GB Bearing 14. GD Hex Bushing 15. G Chain, No. 41, 114 Pitch Including Connector Link GR Connector Link, No G Wave Washer, ½" 17. G Washer, ¼" USS 18. G Slotted Hex Self-Tapping Screw, ¼"-20 x ¾" 19. G Slotted Hex Self-Tapping Screw, No. 10 x ⅜" 20. GD Support Strap 21. GD Metering Gate 22. GB Granular Housing A. GA Granular Chemical Meter Complete (Items 1, 9, 10, And 16-22) P28 6/05

29 GRANULAR CHEMICAL BANDING OPTIONS RUA061/RUA073(RU101mm) 1. GD Funnel 2. G Wire Hose Clamp, ¾" 3. GD Hose, 7 16" x 28" 4. G Slotted Pan Head Self-Tapping Screw, No. 10 x ½" 5. GA Slope-Compensating Bander W/Hardware (4 ½" Band Width) G Uni-Clamp G Pan Head Screw, No x 1 ¼" G Hex Nut, No GD U-Bolt, 1 ½" x " x ¼"-20 G Washer, ¼" USS G Lock Nut, ¼"-20, Grade B 7. GD Spacer 8. G Carriage Bolt, ½"-13 x 2 ½" (Replaces Existing ½" x 2 ¼" Hardware) 9. GA Bracket (Straight Drop In-Furrow) 10. G1K385 - Bander Shield Kit W/Hardware And Instruction G Hex Head Cap Screw, ⅜"-16 x 1 ½" GD Special Washer, ⅜", Hardened P29 Rev. 11/06 6/05

30 ROW UNIT MOUNTED NO TILL COULTER (D14398/RU102c/RU152) STYLE A STYLE B P30 Rev. 11/07

31 ROW UNIT MOUNTED NO TILL COULTER (Per Row) 1. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GA Arm (Style A) 3. G Hex Head Cap Screw, ⅝"-11 x 4" G Lock Nut, ⅝" G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GD Adapter 6. GA Hub W/Bearing And Retaining Ring GA Bearing, Double Row GD Retaining Ring, " 7. GD Disc Blade, Fluted, 1", 8 Flutes (Shown) GD Disc Blade, Bubbled, 1" GD Disc Blade, Fluted, ¾", 13 Flutes 8. GD Spacer 9. GA Arm (Style B) P31 Rev. 11/07

32 ROW UNIT MOUNTED DISC FURROWER RUA059/RUA058(RU99/RU98g) P32 6/05

33 ROW UNIT MOUNTED DISC FURROWER (Per Row) 1. G Detent Pin, ½" x 2 ½" Grip 2. G Square Head Set Screw, ⅝"-11 x 2 ¼" 3. G Hex Jam Nut, ⅝"-11, Grade 2 4. GA Mounting Bracket 5. GD Bushing, 1" O.D. x 9 16" I.D. x 7 16" Long 6. G Hex Head Cap Screw, ½"-13 x 1 ¾" GD Special Washer, ½", Hardened G Lock Nut, ½" G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" USS G Lock Nut, ½" GD Link 9. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Nut, ½" GA Anchor 11. G Hex Head Cap Screw, ½"-13 x 1 ½" G Lock Nut, ½" GA Support Arm 13. G Truss Head Slotted Machine Screw, 5 16"-18 x ⅞" G Hex Nut, 5 16" GD Dust Cap 15. G Hex Head Cap Screw, ⅝"-11 x 4 ½" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Hub W/Bearings GA Bearing 17. GD Disc Blade, Solid, 12" (Shown) GD Disc Blade, Notched, 12" 18. GD Spacer, 11 16" I.D. x ¾" Long GD Spacer, 11 16" I.D. x ½" Long P33 Rev. 11/07

34 ROW UNIT MOUNTED RESIDUE WHEEL (RU103d/RU103dd) STYLE B STYLE A P34 Rev. 11/07

35 ROW UNIT MOUNTED RESIDUE WHEEL (Per Row) 1. GD Dust Cap 2. GD Wheel, 12 Tine, ⅜" x 12" 3. G Hex Head Cap Screw, ⅝"-11 x 2 ¼" 4. GD Backing Plate 5. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade 8 6. GD Spacer, ½" x " Long 7. GA Wheel Mount 8. G Hex Head Cap Screw, ½"-13 x 3 ½" G Lock Washer, ½" G Hex Nut, ½" GD Spring 10. G Hex Head Cap Screw, ½"-13 x 4 ½" G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 5" (Lockup Bolt) G Lock Nut, ½" GD Spacer, ½" x 3" Long 13. GA Lower Link 14. GA Mount 15. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GA Upper Link 17. G Hex Head Cap Screw, ½"-13 x 3", Full Thread G Hex Jam Nut, ½"-13, Grade GA Hub W/Bearings GA Bearing 19. GD Cover 20. GB Wheel, 12 Tine, ⅜" x 12" A. GA Wheel Assembly, 12 Tine, R.H. (Items 2, 4, 5 And 18) B. GA Wheel Assembly, 12 Tine, R.H. (Items 4, 5, 18, And 20) P35 Rev. 11/07

36 COULTER MOUNTED RESIDUE WHEELS RUA063(RU104uu) STYLE A - Used With Style A Row Unit Mounted No Till Coulter STYLE B - Used With Style B Row Unit Mounted No Till Coulter P36 Rev. 11/07 6/05

37 COULTER MOUNTED RESIDUE WHEELS (Per Row) 1. GD Dust Cap 2. G Hex Head Cap Screw, ⅝"-11 x 3" G Hex Jam Nut, ⅝"-11, Grade 2 3. GD Wheel, 12 Tine, ⅜" x 12" 4. GA Hub W/Bearings GA Bearing 5. GA Cam 6. GD Spring 7. G Washer, ½" SAE 8. G Lock Nut W/Nylon Insert, ½" G Hex Head Cap Screw, ½"-13 x 9 ½", Grade 8 GD Special Washer, ½", Hardened G Lock Nut W/Nylon Insert, ½" GA Mount 11. GD Sleeve, 7 ½" 12. G Machine Bushing, ⅝" (.030" Thick) 13. GA Weed Guard W/Spring Pin G Spring Pin, ¼" x 1" 14. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade GD Backing Plate 16. GB Wheel, 12 Tine, ⅜" x 12" 17. GB Mount 18. G Hex Head Cap Screw, ¾"-10 x 10 ½" GB Bushing, 1 1 / 8 " O.D. x 25 32" I.D. x ¾" Long G Washer, ¾" SAE G Lock Nut, ¾" GA Locking Pin 20. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Washer, ⅜" A. GA Wheel Assembly, 12 Tine, R.H. (Items 3, 4, 14 And 15) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 3, 4, 14 And 15) B. GA Wheel Assembly, 12 Tine, R.H. (Items 4, 14, 15 And 16) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 4, 14, 15 And 16) P37 Rev. 11/07

38 FRAME MOUNTED COULTER W/RESIDUE WHEELS (RU135c/RU135g/RU135hh/ RU153b) With Residue Wheels STYLE B STYLE A P38 Rev. 11/07 6/05

39 FRAME MOUNTED COULTER W/RESIDUE WHEELS (Per Row) 1. G Hex Head Cap Screw, ¾"-10 x 12" 2. GA Plate W/Angle 3. G Hex Head Cap Screw, ½"-13 x 1 ¾" 4. GA Coulter Frame 5. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Nut, ⅝" G Hex Head Cap Screw, ¾"-10 x 6 ½" G Lock Nut, ¾" GD Spring Anchor Bar 8. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GD Adapter 10. GA Hub W/Bearing And Retaining Ring GA Bearing, Double Row GD Retaining Ring, " 11. GD Disc Blade, Fluted, 1", 8 Flutes (Shown) GD Disc Blade, Bubbled, 1" GD Disc Blade, Fluted, ¾", 13 Flutes 12. GB Spring Seat 13. GD Compression Spring 14. GD Sleeve 15. G Hex Head Cap Screw, ⅝"-11 x 5" G Lock Nut, ⅝" GA Coulter Arm W/Grease Fitting G Grease Fitting, 45, ¼" G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Lock Nut, ⅝" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 19. GD Dust Cap 20. G Hex Head Cap Screw, ⅝"-11 x 3" G Hex Jam Nut, ⅝"-11, Grade GD Wheel, 12 Tine, ⅜" x 12" 22. GA Hub W/Bearings GA Bearing 23. GD Backing Plate 24. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade G Machine Bushing, ⅝" (.030" Thick) 26. GA Weed Guard W/Spring Pin G Spring Pin, ¼" x 1" 27. GA Mount 28. GA Cam 29. GD Spring 30. G Lock Nut W/Nylon Insert, ½" G Hex Head Cap Screw, ⅝"-11 x 1 ¾" G Lock Nut, ⅝" GA Support 33. G Hex Head Cap Screw, ½"-13 x 1" G Hex Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Washer, ⅝" SAE G Lock Nut W/Nylon Insert, ⅝" GD Sleeve, 3" 36. GB Wheel, 12 Tine, ⅜" x 12" A. GA Wheel Assembly, 12 Tine, R.H. (Items 21-24) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 21-24) B. GA Wheel Assembly, 12 Tine, R.H. (Items 22, 23, 24 And 36) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 22, 23, 24 And 36) P39 Rev. 6/05

40 INTERPLANT PUSH ROW UNIT (RU141d/RU86k/RU121/RU89q/A11969/A11970) NOTE: Push row units use the same seed tube, row unit depth adjustment components, quick adjustable down force springs, 15" opener disc blades, gauge wheels, closing wheels, meter drive and hopper as the pull row unit. See those pages for common parts. (Per Row) 1. GD Sleeve, " Long 2. GD Spring 3. G Special Washer, ⅜" x 1 ½" O.D. 4. GD Sleeve, 1 ⅜" Long P40 Rev. 11/07 6/05

41 INTERPLANT PUSH ROW UNIT (Per Row) 5. GD Idler 6. G Washer, ⅜" USS 7. G Lock Nut, ⅜" G Chain, No. 41, 96 Pitch Including Connector Link GR Connector Link, No GA Push Row Unit Shank 10. GB Hopper Mount 11. G Hex Head Cap Screw, ⅝"-18 x 1 ¾" G Lock Nut, ⅝" G Carriage Bolt, ⅜"-16 x 1 ¼" G Hex Nut, ⅜"-16 G Lock Nut, ⅜" G Carriage Bolt, ⅜"-16 x 3 ½" 14. GD Stop 15. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Nut, ⅜" GB Seed Tube Guard/Inner Scraper 17. G Hex Socket Head Cap Screw, 5 16"-18 x 1", Grade G Hex Head Cap Screw, ⅝"-18 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 20. GA Upper Arm 21. GA Lower Arm 22. G Hex Head Cap Screw, ⅝"-18 x 2" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Bearing/Sprocket, ⅞" Hex Bore 24. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" GA Mounting Plate 26. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" G Spring Pin, 5 16" x 1 ⅛" 28. GD Lockup 29. G Cotter Pin, ¼" x 1 ½" 30. GD Spring 31. G Clevis Pin, ½" x 1 ½" G Cotter Pin, ⅛" x ¾" 32. GD Spring Tab 33. G Washer, ½" USS 34. GA Lift Lever W/Boot GD Boot 35. GD Bracket 36. GD Wire Lock Pin, ¼" x 1 ¾" 37. GD Mount 38. GA T-Bolt, ⅝"-11 x 6" G Lock Washer, ⅝" G Hex Nut, ⅝" G Hex Head Cap Screw, ⅝"-11 x 7 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Retainer (SDS Only) 41. GD Locking Clip Pin, ¼" x 2 ½" (SDS Only) 42. GA Hopper Hold Down Latch 43. G Washer, ⅜" SAE 44. A Upper Arm 45. A Mounting Plate P41 Rev. 11/07 6/05

42 OUTER HITCH/SAFETY CHAIN PHA038/PHA025(TWL1g/WGN47a/B0292) 1. GA Hitch Mount, 12 Row 30" 2. GB Clevis, Single 3. G Hex Head Cap Screw, 1 ¼"-7 x 6" G Lock Nut, 1 ¼"-7 4. G Hex Head Cap Screw, ⅝"-11 x 2 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Pin, 1 ¼" x 5 ⅛" G Cotter Pin, 3 16" x 2" 6. GA Jack Assembly Complete GA Detent Pin Assembly GR Pin GR Crank Assembly GR Bevel Gear Set, Includes: (2) Bevel Gears, (1) Gear Pin, (1) Groove Pin 7. GA Bracket, Jack Mount GD Rubber Pad 8. GA Safety Pin, 12 ¾", 12 Row 30" GA Safety Pin, 14 ¾", 16 Row 30" GD Lynch Pin, 7 16" 9. GA Wear Mount, 12 Row 30" GA Wear Mount, L.H., 16 Row 30" GA Wear Mount, R.H., 16 Row 30" GA Wear Pad Retainer, 16 Row 30" P42 Rev. 11/07

43 OUTER HITCH/SAFETY CHAIN 10. G Hex Head Cap Screw, ½"-13 x 2" G Hex Head Cap Screw, ½"-13 x 1" G Washer, ½" USS G Lock Washer, ½" 11. G Hex Head Cap Screw, ½"-13 x 1 ½", 12 Row 30" G Hex Head Cap Screw, ½"-13 x 2", 16 Row 30" G Lock Washer, ½" G Hex Nut, ½" GD Shim, 4" x 4" (As Required), All Sizes GD Shim, 4" x 6" (As Required), 16 Row 30" 13. GD Wear Pad, Nylatron, 4" x 4" (As Required), All Sizes GD Wear Pad, Nylatron, 4" x 6" (As Required), 16 Row 30" 14. GD Shim, 16 Gauge, 16 Row 30" Only GD Shim, ⅜", 16 Row 30" Only 15. G Hex Head Cap Screw, ½"-13 x 1" G Lock Washer, ½" G Washer, ½" USS 16. A Outer Hitch, "Y", 97", 12 Row 30" (Non-Stock Item) A Outer Hitch, "Y", 127 ½", 16 Row 30" (Non-Stock Item) 17. GD Pin, 1 ¼" x 12", 12 Row 30" GD Pin, 1 ¼" x 14", 16 Row 30" G Spring Pin, ⅜" x 2" 18. GA Roller W/Bronze Bushings, 12 Row 30" GA Roller W/Bronze Bushings, 16 Row 30" GD Bronze Bushing 19. See Hose Take-Up, Pages P54 And P GD U-Bolt, 3" x 4" x ⅝"-11 G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" GD Hose Clamp, ⅝" x 1 ½" x 1 ½" 22. GA Hitch Mount, 16 Row 30" 23. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Pad 24. G Washer, ½" USS G Washer, ⅝" USS G Lock Nut, ½" GD Pin, ¾" x 3 ⅜" G Cotter Pin, 5 32" x 1 ½" 26. G Hex Head Cap Screw, ⅜"-16 x 3 ¼" GD Sleeve, 2" Long G Lock Nut, ⅜" GA Detent Pin W/Chain (Transport Latch Locking Pin) 28. GD Hose Holder 29. G Lock Nut, ⅜" See Transport Latch Cylinder, Page P G Hex Head Cap Screw, 5 / 8 "-11 x 2 ¼" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Catch Bar 33. GD Spring 34. GA Transport Latch 35. G Spring Pin, ¼" x 1" 36. GA Safety Chain, ½" G1K412 - Safety Chain Repair Kit, Includes Hook, Flat Washer, Latch Pin, Safety Latch And Retaining Ring 37. G Hex Head Cap Screw, ¾"-10 x 2 ¾" G Lock Washer, ¾" G Hex Nut, ¾" G Hex Head Cap Screw, ¾"-10 x 2" G Lock Nut, ¾" See Hydraulic Hoses And Fittings On Hitch, Pages P100 And P G Hex Head Cap Screw, 1 ¼"-7 x 3" GD Special Washer G Washer, 1 ¼" SAE G Lock Nut, 1 ¼" G Lock Nut, ½" GD Hose Clamp, ⅞" x 3 ½" 43. GB Hitch Clevis, Single (2" Pin) P43 Rev. 11/07

44 2-POINT HITCH OPTION (A12406) P44 Rev. 11/07

45 2-POINT HITCH OPTION 1. GA Hammer Strap, Category 3N And 3 2. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" 3. GA Hitch Bar 4. GA Pivot Mount 5. GA Pivot Bolt W/Grease Fitting, 1 ¾" x 10 ⅜" (Total Length) G Grease Fitting, ¼"-28 GD Washer, 3" O.D. x " x ¼" Thick GD Sleeve, 3" O.D. x " x 29 32" Thick 6. G Hex Head Cap Screw, ⅝"-11 x 1 ¼" G Washer, ⅝" USS 7. GD Pivot Lock 8. GA Pin, 13 ⅜" 9. GA Hitch Pivot W/Bushings And Grease Fittings GD Hardened Bushing, 2 ¾" O.D. x 2 ¼" I.D. x 3" G Grease Fitting, 90, ¼" G Hex Head Cap Screw, 1"-8 x 2" G Lock Washer, 1" GD Washer, 4" O.D. x " I.D. x ⅜" 11. G Hex Head Cap Screw, 1 ¼"-7 x 6" G Lock Nut, 1 ¼" GD Washer, 4" O.D. x 2 ¼" I.D. x ¼" P45 Rev. 11/07

46 INNER HITCH/UNDERCARRIAGE ASSEMBLY (Front) (A9999a) P46 Rev. 11/07

47 INNER HITCH/UNDERCARRIAGE ASSEMBLY (Front) 1. GD Pin, 1 ¼" x 5 ⅛" G Cotter Pin, 3 16" x 2" 2. G Square Head Set Screw, 5 16"-18 x ¾" 3. GD Shaft, 1 ¼" x 7", 12 Row 30" GD Shaft, 1 ¼" x 8", 16 Row 30" 4. GB Shoe 5. G Hex Head Cap Screw, ½"-13 x 1 ½", 16 Row 30" G Hex Head Cap Screw, ½"-13 x 1", 12 Row 30" G Lock Washer, ½" 6. GD Wear Pad, Nylatron, 4" x 4" GD Shim, 4" x 4" 7. - See Tongue Cylinder, Pages P89 Or P Inner Hitch/Undercarriage, See Inner Hitch/Undercarriage Assembly (Rear), Pages P46 And P47 9. GD Shaft, 1 ¼" x 6 ⅜", 12 Row 30" GD Shaft, 1 ¼" x 7 ⅜", 16 Row 30" 10. G External Washer 11. GA Tongue Hook W/Grease Fittings, 12 Row 30" GA Tongue Hook W/Grease Fittings, 16 Row 30" G Grease Fitting, ⅛" NPT 12. GD Pin, 1 ¼" x 12", 12 Row 30" GD Pin, 1 ¼" x 14 ½", 16 Row 30" G Cotter Pin, ⅜" x 2" 13. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Pad 14. G Hex Head Cap Screw, ½"-13 x 2 ¼" G Lock Nut, ½" GD Hose Clamp, ⅝" x 1 ½" x 1 ½" 16. G Lock Nut, ½" GD U-Bolt, 2 ⅛" x 1 ⅞" x ⅜"-16 G Lock Washer, ⅜" G Hex Nut, ⅜" See Tongue Lock Cylinder, Page P GD Sleeve 20. G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Lock Nut, ⅜"-16 P47 Rev. 11/07

48 INNER HITCH/UNDERCARRIAGE ASSEMBLY (Rear) (A9999aaa) P48 Rev. 11/07

49 INNER HITCH/UNDERCARRIAGE ASSEMBLY (Rear) 1. A Inner Hitch/Undercarriage W/Stub Axles, 254", 12 Row 30" (Shown) (Non-Stock Item) A Inner Hitch/Undercarriage W/Stub Axles, 290", 16 Row 30" (Non-Stock Item) GA Stub Axle, L.H. GA Stub Axle, R.H. 2. GD Hose Protector, 48" 3. G Hex Head Cap Screw, ½"-13 x 1" G Lock Washer, ½" 4. GD Bulkhead Plate 5. G Hex Head Cap Screw, ½"-13 x 1 ½" 6. GD Tap Block, 1" x 2" x 4" GD Shim, 2" x 4", 22 Gauge (As Required) GD Shim, 2" x 4", 16 Gauge 7. - See Center Pivot, Pages P60 And P See Rotation Cylinder, Page P81 9. GD Pin, 1 ¼" x 5 ¼" G Cotter Pin, ¼" x 2" 10. GD Steel Bushing, 1" Wide 11. G Hex Head Cap Screw, 5 16"-18 x ¾" G Lock Washer, 5 16" 12. GA Hinged Step 13. G Carriage Bolt, 5 16"-18 x ¾" G Lock Washer, 5 16" G Hex Nut, 5 16" GD Hinge 15. GA Roller Guide, L.H. (Shown) GA Roller Guide, R.H. 16. G Hex Head Cap Screw, ⅝"-11 x 2 ¼" G Lock Washer, ⅝" G Hex Nut, ⅝" G Hex Head Cap Screw, ¾"-16 x 2 ½" GD Special Washer, 25 32" I.D. x 1 ¼" O.D., Hardened G Hex Nut, ¾" GD Scraper 19. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Washer, ½" P49 Rev. 11/07

50 TRANSPORT WHEELS (TWL198e) (Per Assy.) 1. GA Valve Stem 2. G Hex Head Cap Screw, ⅞"-9 x 2 ½", Grade 8 G Lock Washer, ⅞" 3. GA Seal 4. GA Bearing 5. GA Hub W/Cups, Bolts, Nuts And Grease Fitting, 8 Bolt, 1 ¾" Bore G Grease Fitting, ¼"-28 GD Cup GR Hub Bolt, ⅝"-18 x 2 ¼", Grade 8 GR Lug Nut, ⅝"-18 UNF 6. GD Special Nut, 1 ¾"-12 UNF 7. GD Special Hex Nut, 1 ¾"-12 UNF 8. GA Rim, 5.5" x 22.5" 9. GD Tire, 41 x 11 R22.5" W/O Center Rib (Specify Brand*) 10. GA Spindle W/Retaining Ring, 1 ¾" G External Retaining Ring, 2 ½" A. GA Tire And Rim Assembly (Items 1, 8 And 9) (Specify Brand*) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. P50 Rev. 11/07

51 AXLE STEPS (TWL242/TWL243) 1. G Hex Head Cap Screw, ⅜"-16 x 1" (SDS Only) G Washer, ⅜" USS G Lock Washer, ⅜" 2. GD U-Bolt, 2" x 2" x ½"-13 (SDS Only) G Washer, ½" SAE G Lock Nut, ½" GA Axle Step (SDS Only) 4. GA Axle Step (Conventional Only) 5. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Lock Washer, ½" G Washer, ½" USS 6. GB Step (SDS Only) P51 Rev. 11/07

52 STABILIZER ASSEMBLY (TWL244) P52 Rev. 11/07

53 STABILIZER ASSEMBLY 1. GB Guide Bar 2. G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Lock Nut, ⅝" GD Shim (As Required) 4. GA Stabilizer 5. G Machine Bushing, 1 ¼", 10 Gauge 6. GD Sleeve, 1 ¼" x " 7. GD Bronze Bushing, 1 ½" O.D. x 1 ¼" I.D. x 1 ½" Long 8. GD Roller 9. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" G Machine Bushing, 1 ¼", 10 Gauge 10. GA Hub W/Bearing And Retaining Ring GA Double Row Bearing GD Retaining Ring, " 11. G Hex Head Cap Screw, ½"-13 x 1" 12. GD Shaft, 1 ½" x " 13. GR Pin, 1" x 3 ½" GR Hair Pin Clip See Stabilizer Cylinder, Page P GR Pin, 1" x 2 ⅞" GR Hair Pin Clip P53 Rev. 11/07

54 HOSE TAKE-UP PHA039/TWL137b/TWL137bbb P54 Rev. 11/07

55 HOSE TAKE-UP 1. G Carriage Bolt, ⅝"-11 x 2" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Take-Up, 44 ¼", 12 Row 30" (Shown) GA Take-Up, 56 ¼", 16 Row 30" 3. GD Clamp, 3" x 5 ⅜" GD Rubber Pad 4. G Hex Head Cap Screw, ½"-13 x 2 ¼" G Lock Nut, ½" GD Lynch Pin, ¼" 6. GA Take-Up, 44 ¼", 12 Row 30" (Shown) GA Take-Up, 56 ¼", 16 Row 30" 7. GD Cover 8. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Washer, ⅜" SAE G Hex Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 5" G Washer, ⅜" USS G Lock Nut, ⅜" See Valve Block - Located On Hitch, Page P GD Clamp, 4" x 6 ⅜" P55 Rev. 11/07

56 CENTER FRAME (TWL277) 12 ROW 30" SHOWN SDS Only 1. - See Wing Frame, Pages P58 And P See Wing Lock Cylinders, Pages P86 And P87 3. GD Pin, 1 ¼" x 4 ½" G Machine Bushing, 1 ¼", 10 Gauge G Cotter Pin, ¼" x 2" 4. GD Special Washer, ⅝", Hardened G Hex Nut, ⅝" GD Cap 6. GD Hose Clamp, 9 16" x 2 ½" x 2" 7. G Hex Head Cap Screw, ⅜"-16 x 2" G Lock Nut, ⅜" GD Wear Pad, 7" x 7" x ½" Thick 9. - See Valve Block - Located On Front Center Frame, Page P See Valve Block - Located On Front Center Frame, Page P GA Pad Holder W/Bars GD Bar, 1 ¼" x 6" x ¼" Thick GD Bar, 1 ¼" x 6" x ⅜" Thick G Hex Head Cap Screw, ⅜"-16 x 1" 12. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜"-16 P56 Rev. 11/07

57 CENTER FRAME 13. G Hex Head Cap Screw, ¾"-10 x 3", Full Thread G Hex Nut, ¾" A Frame, 136", 12 Row 30" And 16 Row 30" (Non-Stock Item) 15. GA Pin, 2 ⅛" 16. G Carriage Bolt, ½"-13 x 1 ½" G Lock Washer, ½" G Hex Nut, ½" G Machine Bushing, 3 ⅛" x 2 ⅛" x 3 16" (As Required) G Machine Bushing, 2 ⅛", 10 Gauge (As Required) G Machine Bushing, 2 ⅛", 14 Gauge (As Required) 18. G Hex Socket Set Screw, ½"-13 x 1 ¼" G Lock Washer, ½", Internal/External G Hex Nut, ½" GA Cam Roller Mount, L.H. (Shown) GA Cam Roller Mount, R.H. 20. G Carriage Bolt, ⅝"-11 x 1 ¾" G Lock Washer, ⅝" G Hex Nut, ⅝" GA Cam Follower W/Grease Fitting G Grease Fitting, ¼" GD Sleeve 23. GB Spring Washer 24. G Hex Head Cap Screw, ¾"-10 x 1 ½" 25. GD Hinge Pin, 2 ⅛" x 25 ¾" 26. GD Hose Clamp, 4 ¾" x 9" 27. G Lock Nut, ⅜" GA Handle (SDS Only) 29. G Hex Head Cap Screw, ½"-13 x 1" G Washer, ½" USS G Lock Washer, ½" 30. GD Mount 31. G Carriage Bolt, ⅝"-11 x 1 ¾" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GD Spring Pivot 33. GD Hose Holder, R.H. 34. GD Cover See Valve Block - Located On R.H. Side Of Center Pivot, Page P See Valve Blocks - Located On Rear Center Frame, Pages P94 And P G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" SAE GD Sleeve, 1 ⅜" Long G Lock Nut, ⅜" GD Spring GD Sleeve, ½" x ½" Long 39. GD Shim, 3 ¾" x 10", 7 Gauge GD Shim, 3 ¾" x 10" x ¼" Thick 40. GD Hose Holder, L.H. 41. G Hex Head Cap Screw, ½"-13 x 14" G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 7 ½" G Lock Washer, ½" G Hex Nut, ½" GD Sleeve, ½" I.D. x 12 ¼" Long 44. GD Sleeve, ½" I.D. x 6" Long P57 Rev. 11/07

58 WING FRAME (TWL187c/TWL180a/TWL194h/TWL194g/TWL194e/TWL188b/TWL139b) 12 ROW 30" SHOWN NOTE: Installed On Push Row Unit (If Applicable) WITH EVEN-ROW PUSH ROW UNIT OP- TION 16 Row 30" 12 Row 30" P58 Rev. 11/07

59 WING FRAME 1. GA Light Bracket 2. G Hex Head Cap Screw, ⅝"-11 x 7" G Lock Washer, ⅝" G Hex Nut, ⅝" G Detent Pin, ½" x 3 ½" Grip 4. G Hex Head Cap Screw, ½"-13 x 3 ½" G Washer, ½" SAE G Lock Nut, ½" GB Light Mount Bracket 6. GD Mounting Bracket 7. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Push Row Unit Light Bracket 9. GD Pin, 1 ¼" x 5 ½" GD Sleeve, ½" G Machine Bushing, 1 ¼", 10 Gauge G Cotter Pin, ¼" x 2" 10. A Wing, R.H., 120", 12 Row 30" (Non-Stock Item) A Wing, L.H., 124", 12 Row 30" (Non-Stock Item) A Wing, R.H., 180", 16 Row 30" (Non-Stock Item) A Wing, L.H., 184", 16 Row 30" (Non-Stock Item) 11. GD Hose Clamp, 3 ¼" x 9" 12. G Lock Nut, ⅜" G Carriage Bolt, 5 16"-18 x ¾" G Serrated Flange Nut, 5 16" GD Light Mount Extension 15. G Hex Head Cap Screw, ¼"-20 x 1" G Lock Washer, ¼" G Hex Nut, ¼" GD Bracket 17. See Electrical Components, Pages P104-P G Hex Head Cap Screw, ¼"-20 x 1" G Lock Nut, ¼"-20, Grade B 19. GA Marker Mount, 16 Row 30" 20. GA Marker Mount, 12 Row 30" 21. G Hex Head Cap Screw, ¾"-10 x 5" G Lock Washer, ¾" 22. GD Plate 23. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Hose Clamp, 9 16" x 2 ½" x 2" 25. G Lock Nut, ⅜" GD Shield 27. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Washer, ⅝" USS G Lock Washer, ⅝" G Hex Nut, ⅝" GD Shield 29. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. G7698X - Push Row Unit Mounted Light Bracket Package (Items 7 And 8 On This Page And ⅜" Insulated Clamp, Item 6 On Pages P104 And P105 Or Item 6 On Pages P106 And P107) P59 Rev. 11/07

60 CENTER PIVOT PFA087(TWL196b) P60 Rev. 11/07

61 CENTER PIVOT 1. - See Center Lift Cylinder, Pages P83 Or P84 2. GA Manual Safety Lockup W/Detent Pin, 42 ⅞" Long GA Detent Pin W/Chain 3. GA Center Post, " 4. GR Pin, 1" x 3 ½" GR Hair Pin Clip 5. GD Lockup Extension, 10" 6. GD Cup 7. G Hex Head Cap Screw, ¾"-10 x 2 ½" GD Special Washer, 25 32" I.D. x 1 ¼" O.D., Hardened 8 G Grease Fitting, ¼" GD Bearing Cap 10. GD O-Ring Seal 11. GD Shim,.005" Thick (As Required) GD Shim,.020" Thick (As Required) GD Shim,.007" Thick (As Required) 12. GA Cone 13. GA Taper Lock Mount 14. G Hex Head Cap Screw, ⅝"-18 x 1 ¼" GD Special Washer, ⅝", Hardened 15. GD Taper Lock Collar 16. GD Taper Lock Pin 17. G Hex Head Cap Screw, ⅝"-11 x 1" G Washer, ⅝" SAE 18. G Hex Head Cap Screw, ⅝"-18 x 5" GD Special Washer, ⅝", Hardened 19. G Hex Head Cap Screw, ⅝"-18 x 1 ¾" GD Special Washer, ⅝", Hardened 20. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" 21. GD Tension Bushing, 1 ½" O.D. x 1 ¼" I.D. x ⅝" Long P61 Rev. 11/07

62 CONTACT WHEEL AND DRIVE SHAFT(S) PTD057/PFA046/PTD075/PLA033(TWL11m) 16 Row 30" 12 Row 30" P62 Rev. 11/07

63 CONTACT WHEEL AND DRIVE SHAFT(S) (Per Assy.) 1. GD SMV Sign 2. G Hex Head Cap Screw, ¼"-20 x ½" G Lock Washer, ¼" G Hex Nut, ¼" GD Bracket 4. GD Cover 5. GD Spring 6. G Chain, No. 40, 110 Pitch Including Connector Link, Half Rate (2 To 1) Drive G Chain, No. 40, 118 Pitch Including Connector Link GR Connector Link, No See Inner Module Drive, Pages P68 And P See Point Row Clutch, Pages P70 And P71 9. G Spring Pin, ¼" x 1 ½" 10. G Hex Head Cap Screw, ⅜"-16 x 10" (Used To Secure Point Row Clutch) G Lock Nut, ⅜" GA Sprocket, 30 Tooth 12. GA Idler W/Sprocket And Hardware, L.H. GA Idler W/Sprocket And Hardware, R.H. (Shown) GA Sprocket W/Bearing, 18 Tooth G Hex Head Cap Screw, ½"-13 x 1 ½" G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade G Hex Head Cap Screw, ⅝"-11 x 4" G Machine Bushing, ⅝", 14 Gauge G Hex Nut, ⅝"-11 G Lock Nut, ⅝" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GA Pin, 2 ⅛" 16. G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" See Wing Lift Cylinder, Page P GA Spring W/Plug 19. GD Lynch Pin, ¼" 20. GA Sprocket, 30 Tooth GA Sprocket, 15 Tooth, Half Rate (2 To 1) Drive 21. GD Hex Shaft, ⅞" x 11 ¾" (2 Holes) 22. G Carriage Bolt, 5 16"-18 x 1" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Flanged Bearing, ⅞" Hex Bore 24. GD Coupler, 1 ¾", 16 Row 30" Only 25. G Hex Head Adjusting Bolt, ½"-13 x 4", Grade 2 G Hex Jam Nut, ½"-13, Grade GD Tire, 4.80" x 8", 4 Ply, Rib Implement (Specify Brand*) GD Valve Stem 27. GA Rim, 3.75" x 8" 28. G Machine Bushing, 1", 10 Gauge (Continued) P63 Rev. 11/07

64 CONTACT DRIVE WHEEL AND DRIVE SHAFT(S) (Per Assy.) (Continued) 29. GA Wheel Arm 30. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 31. GD Shield 32. G Hex Head Cap Screw, ⅝"-11 x 2" G Machine Bushing, ⅞", 14 Gauge GD Special Washer, ⅝", Hardened G Washer, ⅝" SAE G Lock Nut, ⅝" GD Hinge, Female GD Hinge W/Pins, Male 34. G Hex Head Cap Screw, ¼"-20 x 1" G Lock Washer, ¼" G Hex Nut, ¼" GD Hex Shaft, ⅞" x 29 ⅝" 36. G Cotter Pin, 3 16" x 1" 37. GD Spring 38. GA Block And Hub Assembly 39. GD L-Pin 40. GA Sprocket, 30 Tooth 41. G External Retaining Ring, 1 ¼" 42. GD Pipe, 1" x 23 ¼" 43. GD Catch 44. G Hose Clamp, No GD Cover 46. G Hex Head Cap Screw, ¼"-20 x ½" G Lock Washer, ¼" G Hex Nut, ¼"-20 A. GA Tire And Rim Assembly (Items 26 And 27) (Specify Brand*) B. GA Ratchet/Sprocket Assembly (L.H. Side Of Planter) (Items 36-41) GA Ratchet/Sprocket Assembly (R.H. Side Of Planter) (Items 36-41) C. G1K324 - Contact Wheel Arm Replacement Kit (Items 9, 21, 22, 23, 25, 28 And 29) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Different brand tires may have different diameters. Change in tire brand may affect rates. Field checks are recommended after any change in contact tires. P64 Rev. 11/07

65 GROUND DRIVE WHEEL PTD057(TWL142b) (Per Assy.) 1. GD Pin, 1 ¼" x 13 ¼" 2. GA Wheel Module 3. G Spring Pin, ⅜" x 2" 4. GD Pin, 1 ¼" x 5 ⅝" G Washer, 1 ¼" SAE G Cotter Pin, ¼" x 2" 5. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" 6. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" G Hex Nut, ¾" GD Scraper Arm 8. GA Spindle W/Round External Retaining Ring, 10" GD Round External Retaining Ring 9. GA Bearing 10. GR Lug Bolt, 9 16" GA Hub W/Cups, 6 Bolt GR Cup 12. G Hex Jam Nut, 1 ½"-12, Grade GD Tire, 7.50" x 20", 8 Ply, Tubeless W/O Center Rib (Specify Brand*) 14. GA Valve Stem 15. GA Rim, 5.5" x 20" 16. GD Bar Clamp 17. G Hex Head Cap Screw, ½"-13 x 1 ¾" G Lock Washer, ½" G Hex Nut, ½" G Carriage Bolt, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GD Scraper A. GA Tire And Rim Assembly (Specify Brand*)(Items 13-15) B. GA Hub And Spindle Assembly (Items 8, 9, 11 And 12) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. P65 Rev. 11/07

66 SEED RATE TRANSMISSION AND ROW UNIT DRILL SHAFTS PTD056/PTD065/PTD076/PTD079(TWL14jjj) 12 Row 30" Shown (Per Side) 1. GD Shaft, ⅞" x 15" 2. GD Lynch Pin, ¼" 3. GA Sprocket, 17 Tooth GA Sprocket, 19 Tooth GA Sprocket, 23 Tooth GA Sprocket, 24 Tooth GA Sprocket, 25 Tooth GA Sprocket, 26 Tooth GA Sprocket, 27 Tooth GA Sprocket, 28 Tooth 4. G Spring Pin, ¼" x 1 ½" 5. G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" 6. G Hex Head Cap Screw, ½"-13 x 2" GD Bushing, ¾" Long (If Applicable) G Lock Washer, ½" G Lock Washer, ½", Internal/External G Hex Nut, ½" GD Spring 8. GA Sprocket Storage Rod 9. G Machine Bushing, ⅞", 14 Gauge See Inner Module Drive, Pages P68 And P GD Coupler, 1 ¾", 16 Row 30" Only 12. GD Hex Shaft, ⅞" x 31 ⅜", 16 Row 30" Only 13. G Hex Socket Button Head Cap Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS P66 Rev. 11/07

67 SEED RATE TRANSMISSION AND ROW UNIT DRILL SHAFTS (Per Side) 14. G Square Head Set Screw, 5 16"-18 x ¾" 15. G Cotter Pin, 3 16" x 2" 16. GD Shear Coupler 17. GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" 18. GD Shaft, ⅞" x 13 ½" 19. G Chain, No. 40, 80 Pitch Including Connector Link GR Connector Link, No G Carriage Bolt, 5 16"-18 x 1" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Special Bearing 22. G Flangette 23. G Bearing, ⅞" Hex Bore, Spherical 24. G Square Head Set Screw, ⅜"-16 x ⅝" 25. GD Lock Clamp 26. GD Hex Shaft, ⅞" x 106 ½" (No Holes), Wing, 12 Row 30" GD Hex Shaft, ⅞" x 166 ¾" (No Holes), Wing, 16 Row 30" 27. GA Hanger Bearing, ⅞" Hex Bore 28. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 29. G Machine Bushing, 1", 10 Gauge 30. GA U-Joint W/Grease Fitting, Female, 10 ¼" Long GR Grease Fitting, 45, Metric GR Inboard Yoke And Outer Profile GR Cross And Bearing Kit GR Yoke, ⅞" Hex 31. GA U-Joint W/Grease Fitting, Male, 12 ¼" Long GR Grease Fitting, 45, Metric GR Inner Profile GR Inboard Yoke GR Spring Pin, 8 mm x 50 mm GR Cross And Bearing Kit GR Yoke, ⅞" Hex 32. GD Hex Shaft, ⅞" x 45", R.H. Main Frame (No Holes) GD Hex Shaft, ⅞" x 35", L.H. Main Frame (No Holes) 33. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" GB Coupler 35. G External Inverted Snap Ring, 1 ½" 36. G External Inverted Snap Ring, ⅞" 37. GD Tightener Shaft, 3 ⅜" 38. GD Handle 39. G Vinyl Cap 40. GD Torsion Spring, R.H. (Shown) (Used In L.H. Wrap Spring Wrench) GD Torsion Spring, L.H. (Used In R.H. Wrap Spring Wrench) 41. GD Sleeve, 1 ¼" 42. GD Release Collar, Silver, L.H. (Shown) GD Release Collar, Gold, R.H. A. G1K269 - Lock Clamp Kit (Items 25 And 28) B. G1K381 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 9, 13 And 35-42) (Shown) G1K380 - Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 9, 13 And 35-42) P67 Rev. 11/07

68 INNER MODULE DRIVE PTD058/PFA046/PTD077(TWL16d) 12 Row 30" Shown (Located In Inside Module On 16 Row 30") P68 Rev. 11/07

69 INNER MODULE DRIVE (Per Module) 1. - See Seed Rate Transmission And Row Unit Drill Shafts, Pages P66 And P See Contact Drive Wheel And Drive Shaft(s), Pages P62-P64 3. G Hex Head Cap Screw, ⅝"-11 x 3 ¾" G Hex Jam Nut, ⅝"-11, Grade 2 G Lock Nut, ⅝" GA Idler W/Sprocket And Hardware, L.H. GA Idler W/Sprocket And Hardware, R.H. (Shown) GA Sprocket W/Bearing, 18 Tooth G Hex Head Cap Screw, ½"-13 x 3" GD Spacer, 1 ⅛" Long G Washer, ½" SAE G Lock Nut, ½" GD Spring 6. GA Sprocket, 50 Tooth 7. G Hex Head Cap Screw, ½"-13 x 2 ½" GD Bushing, 1" O.D. x 9 16" I.D. x 7 16" Long G Machine Bushing, ½", 7 Gauge G Lock Nut, ½" GA Sprocket W/Bearing, 18 Tooth 9. GA Sprocket, 28 Tooth 10. G Spring Pin, ¼" x 1 ½" 11. G Chain, No. 40, 100 Pitch Including Connector Link GR Connector Link, No G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" 13. G Machine Bushing, 1", 14 Gauge P69 Rev. 11/07

70 POINT ROW CLUTCH PRC019(TWL70d/TWL71d/TWL71/TWL18/A10054) L.H. Point Row Clutch Shown (Used On L.H. Side Of Planter) Input Shaft Connects To Clutch Solenoid Connects To Planter Harness At Valve Block On Rear Center Frame On Point Row Clutch P70 Rev. 11/07

71 POINT ROW CLUTCH (Per Assy.) 1. GD Input Shaft, R.H. Threads (Shown) GD Input Shaft, L.H. Threads 2. G Hex Socket Head Screw, ¼"-20 x 1" G Lock Washer, ¼" 3. G External Inverted Snap Ring, 1 ½" 4. GD V-Ring Seal 5. GD Input Hub 6. GA Hub/Sleeve Assembly W/Spring Pins G Spring Pin, ¼" x 1" G Spring Pin, 5 32" x ⅞" 7. G Hex Head Cap Screw, ¼"-20 x ¾" G Lock Washer, ¼" G Hex Nut, ¼" GA Solenoid Complete GR Snap Ring GR Spring GR Boot GR Plunger 9. G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Hex Nut, ⅜"-16 G Washer, ⅜" SAE G Lock Washer, ⅜" G Hex Jam Nut, ⅜"-16, Grade G Hex Socket Head Cap Screw, ¼"-20 x 1 ¾", Grade 8 G Lock Washer, ¼" G Hex Nut, ¼" GD Spring 12. GD Mounting Plate 13. GD Bushing 14. GD Coupler W/R.H. Threads (Shown) GD Coupler W/L.H. Threads 15. GD Felt Washer 16. GD Spring, L.H. (Shown) GD Spring, R.H. 17. GD Stop Collar 18. GD Rue Ring Cotter, 5 16" 19. GD Actuator Arm 20. G Spring Pin, 3 16" x 2 ¼" 21. G Hex Socket Head Screw, No x ½" G Lock Washer, No GD Hex Shaft, ⅞" x 13" 23. GA Wiring Harness, 228", R.H. Side, 12 Row 30" GA Wiring Harness, 264", L.H. Side, 12 Row 30" GA Wiring Harness, 252", R.H. Side, 16 Row 30" GA Wiring Harness, 300", L.H. Side, 16 Row 30" 24. GA Ground Cable, Green 25. G Fork Terminal 26. GD Lock Wire, 10", Stainless Steel 27. G Spring Pin, 3 16" x 1 ¼" A. GA Point Row Clutch Assembly, R.H. (R.H. Side Of Machine) (Items 1-21, 24, 26 And 27) GA Point Row Clutch Assembly, L.H. (L.H. Side Of Machine) (Items 1-21, 24, 26 And 27) P71 Rev. 11/07

72 TWO-SPEED POINT ROW CLUTCH PRC023(FF47c/A7274/TWL71/TWL18/A10054) L.H. Two-Speed Point Row Clutch Shown (Used On L.H. Side Of Planter) Input Shaft Jumper Wire Between Point Row Clutch Solenoids Connects To Planter Harness At Valve Block On Rear Center Frame Connects To Clutch Solenoids P72 Rev. 11/07

73 TWO-SPEED POINT ROW CLUTCH (Per Assy.) 1. GD Threaded Rod, ¼"-20 x 3 ½" G Hex Nut, ¼"-20 G Lock Washer, ¼" GD Allen Nut, ¼" G Hex Head Cap Screw, ¼"-20 x ¾" G Lock Washer, ¼" G Hex Nut, ¼" GD Threaded Rod, ⅜"-16 x 4 ¼" G Lock Nut, ⅜"-16 G Lock Washer, ⅜" G Hex Nut, ⅜" GD Spring 5. GA Hub/Sleeve Assembly W/Seals, Sleeve, Pins And Screws GD Seal GD Sleeve G Hex Socket Set Screw, 5 16"-18 x ¾" G Hex Socket Set Screw, 5 16"-18 x ¼" G Spring Pin, 5 32" x ⅞" G Spring Pin, ¼" x 1" 6. GD Actuator Arm 7. GD Bushing 8. GA Solenoid Complete GR Snap Ring GR Spring GR Boot GR Plunger 9. GD Mounting Plate 10. G Spring Pin, 3 16" x 2 ¼" 11. G Hex Socket Head Screw, No x ¼" 12. GD Spring, L.H. (Shown) 13. GD Stop Collar 14. GD Felt Washer 15. GA Hub W/Seal GD Seal 16. G External Inverted Snap Ring, 1 ½" 17. GD Output Sprocket, 28 Tooth 18. GD Rue Ring Cotter, 5 16" 19. G Hex Socket Head Screw, ¼"-20 x 1" GD Key 20. GD Input Shaft, R.H. Threads (Shown) GD Input Shaft, L.H. Threads 21. GD Input Sprocket, 28 Tooth 22. GD Coupler W/R.H. Threads (Shown) GD Coupler W/L.H. Threads 23. GA Hub W/Seal GD Seal 24. G Fork Terminal 25. GA Jumper Wire W/Ring Terminals, " (Between Solenoids) 26. GA Wiring Harness, 228", R.H. Side, 12 Row 30" GA Wiring Harness, 264", L.H. Side, 12 Row 30" GA Wiring Harness, 252", R.H. Side, 16 Row 30" GA Wiring Harness, 300", L.H. Side, 16 Row 30" 27. GD Spring, R.H. P73 Rev. 11/07

74 TWO-SPEED POINT ROW CLUTCH WHEEL MODULE EXTENSION PRC022/PRC019/PTD078/PTD079(TWL77e/TWL84b/TWL79a/TWL80b) Output Sprocket TRAVEL See Inner Wheel Module Input Sprocket TRAVEL TRAVEL (Per Assy.) 1. GD Spring 2. G Hex Head Cap Screw, ⅝"-11 x 4" G Lock Nut, ⅝"-11 G Hex Nut, ⅝" GA Idler W/Sprocket And Hardware GD Bushing, ¾" Long G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade 2 G Hex Head Cap Screw, ½"-13 x 2 ½" GA Sprocket W/Bearing, 18 Tooth 4. GA Sprocket, 28 Tooth 5. G Machine Bushing, 1", 10 Gauge 6. G Flangette 7. G Bearing, ⅞" Hex Bore, Spherical 8. G Carriage Bolt, 5 16"-18 x ¾" G Lock Washer, 5 16" G Hex Nut, 5 16" G Hex Head Cap Screw, ½"-13 x 1 ¼" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½"-13 P74 Rev. 11/07

75 TWO-SPEED POINT ROW CLUTCH WHEEL MODULE EXTENSION (Per Assy.) 10. GA Extension Bracket 11. G Hex Head Cap Screw, ¼"-20 x 1 ¼" G Washer, ¼" USS G Lock Washer, ¼" G Hex Nut, ¼" G Clevis Pin, 5 16" x ¾" G Retaining Ring, 5 16" 13. G Hex Head Cap Screw, ¼"-20 x 1" G Washer, ¼" USS G Lock Washer, ¼" G Hex Nut, ¼" See Contact Wheel And Drive Shaft(s), Pages P62-P See Two-Speed Point Row Clutch, Pages P72 And P G Chain, No. 40, 74 Pitch Including Connector Link GR Connector Link, No G Chain, No. 40, 100 Pitch Including Connector Link GR Connector Link, No GA Overrunning Sprocket Assembly, R.H. GA Overrunning Sprocket Assembly, L.H. G External Retaining Ring, 1 ¼" GD L-Pin G Spring Pin, 3 16" x 1 ¼" G Cotter Pin, 5 32" x 1" GD Spring GA Block GA Sprocket W/Bushing, 30 Tooth 19. GD Hex Shaft, ⅞" x 13" 20. G Hex Socket Button Head Cap Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS 21. GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" 22. GD Lynch Pin, ¼" 23. G Hex Head Cap Screw, ⅜"-16 x 10" G Lock Nut, ⅜" GD Shaft, ⅞" x 13 ¾" 25. G Spring Pin, ¼" x 1 ½" 26. GA Sprocket, 24 Tooth GA Sprocket, 15 Tooth GA Sprocket, 17 Tooth GA Sprocket, 27 Tooth GA Sprocket, 23 Tooth (From Transmission) GA Sprocket, 25 Tooth (From Transmission) GA Sprocket, 26 Tooth (From Transmission) 27. GA Sprocket Storage Rod 28. G Vinyl Cap 29. G External Inverted Snap Ring, 1 ½" 30. G External Inverted Snap Ring, ⅞" 31. GD Sleeve, 1 ¼" 32. GD Torsion Spring, R.H. (Shown) (Used In L.H. Wrap Spring Wrench) GD Torsion Spring, L.H. (Used In R.H. Wrap Spring Wrench) 33. GD Release Collar, Silver, L.H. (Shown) GD Release Collar, Gold, R.H. 34. GD Tightener Shaft, 3 ⅜" 35. GD Handle 36. G Machine Bushing, ⅞", 14 Gauge A. G1K381 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 20 And 28-36) (Shown) G1K380 1 Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 20 And 28-36) P75 Rev. 11/07

76 ROW MARKER ASSEMBLY 12 ROW 30" MKR019/MKR027(MKR14i) P76 Rev. 11/07

77 ROW MARKER ASSEMBLY 12 ROW 30" (Per Assy.) 1. GA Arm W/Grease Fittings, Second Stage, 110" G Grease Fitting, ⅛" NPT 2. G Washer, 1 ¼" SAE 3. GD Pin, 1 ¼" x 12 ¼" G Cotter Pin, ¼" x 2" 4. GA Arm W/Grease Fittings, First Stage G Grease Fitting, ⅛" NPT 5. GD Sleeve, 1" 6. GA Safety Lockup W/Detent Pins, 19 ⅜" G Detent Pin, ½" x 2 ½" Grip 7. G Hex Head Cap Screw, ⅝"-11 x 5" GD Special Washer, ⅝", Hardened G Lock Washer, ⅝" G Hex Nut, ⅝" GD Extension Tube, 55" 9. - See Row Marker (Cushion) Cylinder, Page P GD Pin, 1 ¼" x 8 ¼" G Cotter Pin, ¼" x 2" 11. GD Pin, 1 ¼" x 9 ½" G Cotter Pin, ¼" x 2" 12. GD Shim, 2 ½" x 7 ¼", 16 Gauge (As Required) 13. GA Mount 14. GA Stand, 20" (12 Row 30" Only) 15. GD U-Bolt, 2" x 2" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Bar 17. GD U-Bolt, 2 ½" x 2 ½" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GA Molded Stop, 12 ¼" Long 20. GD Plate, 6" x 6" See Hydraulic Hoses And Fittings On Planter Frame, Pages P102 And P GA Pin W/Grease Fitting, 1 ¼" x " G Grease Fitting, ¼" GA Arm, First Stage 24. GA Pin W/Grease Fitting, 1 ¼" x 9 ½" G Grease Fitting, ¼"-28 P77 Rev. 11/07

78 ROW MARKER ASSEMBLY 16 ROW 30" MKR019/MKR023MKR027(MKR15j) P78 Rev. 11/07

79 ROW MARKER ASSEMBLY 16 ROW 30" (Per Assy.) 1. GA Arm, Second Stage, 172 ¼" 2. GD Pin, 1 ¼" x 6 ½" G Cotter Pin, ¼" x 2" 3. G Machine Bushing, 1 ¼", 18 Gauge 4. GD Pin, 1 ¼" x 13 ¼" G Cotter Pin, ¼" x 2" 5. GA Arm W/Grease Fittings, First Stage, R.H. GA Arm W/Grease Fittings, First Stage, L.H. G Grease Fitting, ⅛" NPT 6. GA Safety Lockup W/Detent Pins, 19 ⅜" G Detent Pin, ½" x 2 ½" Grip 7. G Hex Head Cap Screw, ⅝"-11 x 5" (If Applicable) G Hex Head Cap Screw, ⅝"-11 x 2 ½" (If Applicable) GD Special Washer, ⅝", Hardened G Lock Washer, ⅝" G Hex Nut, ⅝" GD Extension Tube, 55" 9. - See Row Marker (Cushion) Cylinder, Page P GD Pin, 1 ¼" x 9 ½" G Cotter Pin, ¼" x 2" 11. GD Pin, 1 ¼" x 11 ½" G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Lock Nut, ⅜" GD Shim, 2 ½" x 12 ½", 16 Gauge (As Required) (Shown) GD Shim, 2 ½" x 8 ¼", 16 Gauge (As Required) 13. GA Mount 14. GA Stand, 30" 15. GD U-Bolt, 2" x 2" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Bar 17. GD U-Bolt, 2 ½" x 2 ½" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GA Molded Stop, 12 ¼" Long 20. G Special Washer, 1 ¼" (As Required) 21. GD Plate, 7" x 7" See Hydraulic Hoses And Fittings On Planter Frame, Pages P102 And P G Washer, 1 ¼" SAE G Machine Bushing, 1 ¼", 18 Gauge 24. GA Pin W/Grease Fitting, 1 ¼" x 13" G Grease Fitting, ¼" GA Arm, First Stage, L.H. (Shown) GA Arm, First Stage, R.H. 26. GA Pin W/Grease Fitting, 1 ¼" x 11 ½" G Grease Fitting, ¼"-28 P79 Rev. 11/07

80 ROW MARKER SPINDLE/HUB/BLADE MKR020(MKR4) (Per Assy.) 1. G Hex Head Cap Screw, ½"-20 x 1" G Lock Washer, ½" 2. GD Retainer 3. GD Disc Blade, Solid, 16" (Shown) GD Disc Blade, Notched, 16" (Optional) 4. GD Dust Cap 5. G Slotted Hex Nut, ⅝" G Cotter Pin, 5 32" x 1" 7. G Washer, ⅝" SAE 8. GA Bearing 9. GA Hub W/Cups, 4 Bolt GR Outer Cup GR Inner Cup 10. GA Bearing 11. GA Grease Seal 12. GA Rubber Seal 13. GA Spindle, R.H. GA Spindle, L.H. (Shown) 14. G Carriage Bolt, ½"-13 x 3 ½" G Machine Bushing, ½", 7 Gauge G Lock Washer, ½" G Hex Nut, ½" GA Depth Band 16. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Nut, 5 16"-18, Grade 8 A. GA Hub And Spindle Assembly, L.H. (Items 1, 2 And 4-13) GA Hub And Spindle Assembly, R.H. (Items 1, 2 And 4-13) P80 Rev. 11/07

81 ROTATION CYLINDER, ALL SIZES (CYL11g) 3 / 4 "-16 O-Ring Ports 1. GA Threaded Ball Joint End 2. G Hex Jam Nut, 1 ¼"-12, Grade 2 3. GD Gland 4. GD Rod 5. GD Piston 6. G Lock Nut, 1 ¼" A Barrel (Non-Stock Item) A. GA Cylinder Complete, 4" x 20" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) U-Cup, (1) Wiper, (1) Seal, (2) Cast Iron Rings, (1) BU Ring, (1) Expander P81 Rev. 11/07

82 STABILIZER CYLINDER, ALL SIZES (CYL60) ¾"-16 O-Ring Ports 1. GD Clevis 2. G Hex Head Cap Screw, ⅜"-16 x 2 ¼" G Lock Nut, ⅜" GD Gland 4. GD Rod 5. GD Piston 6. G Lock Nut, ¾" A Barrel (Non-Stock Item) 8. GA Breather Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring A. GA Cylinder Complete, 2" x " (Part Number Stamped On Barrel) (Items 1-7) B. GR Seal Kit, Includes: (1) T-Seal, (2) O-Rings, (1) BU Ring, (1) U-Cup, (1) Wiper, (1) U-Cup Seal, (2) Wear Rings, (1) IS511 Instruction STABILIZER CYLINDER, ALL SIZES (CYL60d) ¾"-16 O-Ring Ports 1. GD Clevis 2. G Hex Head Cap Screw, ⅜"-16 x 2 ¼" G Lock Nut, ⅜" GD Gland 4. GD Rod 5. GD Piston 6. G Slotted Hex Nut, ¾"-16, Grade 2 7. A Barrel (Non-Stock Item) 8. GA Breather Plug, ⅜" NPT 9. G Connector W/O-Ring, ⅜" Female NPT To ¾" Male O-Ring GR O-Ring 10. G Cotter Pin, ⅛" x 1 ¾" A. GA Cylinder Complete, 2" x " (Part Number Stamped On Barrel) (Items 1-7) B. GR Seal Kit, Includes: (1) T-Seal, (2) O-Rings, (1) BU Ring, (1) U-Cup, (1) Wiper, (1) U-Cup Seal, (1) Wear Ring, (1) IS511 Instruction P82 Rev. 11/07

83 CENTER LIFT CYLINDER, 12 ROW 30" (CYL54c/D12239) Port Type Rephasing ¾"-16 O-Ring Ports 1. GD Clevis 2. G Set Screw, ¼"-20 x ¼" 3. GD Cap 4. GD Rod 5. GD Gland 6. GD Piston 7. G Lock Nut, 1" G Hex Head Cap Screw, ⅜"-16 x 2 ¼" G Lock Nut, ⅜" GA Barrel 10. GD Half Clip 11. G Hex Head Cap Screw, ¼"-20 x ½" G Lock Washer, ¼" 12. GA Steel Hydraulic Line, " 13. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 14. GD Block 15. G Hex Socket Head Cap Screw, 5 16"-18 x 2", Grade G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring 17. GA Counter Balance Valve 18. GD O-Ring, No. 016 A. GA Cylinder Complete, 3" x 52" (Part Number Stamped On Barrel) B. GR Seal Kit (For Cylinder And Counter Balance Valve), Includes: (1) Wiper, (1) U-Cup, (7) O-Rings, (4) BU Rings, (1) Seal, (1) Expander, (2) Cast Iron Rings P83 Rev. 11/07

84 CENTER LIFT CYLINDER, 16 ROW 30" (CYL54c/D12239) Port Type Rephasing ¾"-16 O-Ring Ports 1. GD Clevis 2. G Set Screw, ¼"-20 x ¼" 3. GD Cap 4. GD Rod 5. GD Gland 6. GD Piston 7. G Lock Nut, 1" G Hex Head Cap Screw, ⅜"-16 x 2 ¼" G Lock Nut, ⅜" GA Barrel 10. GD Half Clip 11. G Hex Head Cap Screw, ¼"-20 x ½" G Lock Washer, ¼" 12. GA Steel Hydraulic Line, " 13. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 14. GD Block 15. G Hex Socket Head Cap Screw, 5 16"-18 x 2", Grade G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring 17. GA Counter Balance Valve 18. GD O-Ring, No. 016 A. GA Cylinder Complete, 3 ¼" x 52" (Part Number Stamped On Barrel) B. GR Seal Kit (For Cylinder And Counter Balance Valve), Includes: (1) Wiper, (1) U-Cup, (7) O-Rings, (4) BU Rings, (1) Seal, (1) Expander, (2) Cast Iron Rings P84 Rev. 11/07

85 WING LIFT CYLINDER, 12 ROW 30" CYL031/CYL011(CYL45d) Port Type Rephasing Port Type Rephasing ¾"-16 O-Ring Ports ITEM PART NO. QTY DESCRIPTION 1. GA Rod Assembly W/Grease Fitting G Grease Fitting, ¼" GD Gland 3. GD Piston 4. G Lock Nut, 1" A Barrel (Non-Stock Item) A. GA Cylinder Complete, 4 ¼" x 6" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) Wiper, (2) O-Rings, (1) BU Ring, (1) U-Cup, (2) Seals, (1) Piston Ring WING LIFT CYLINDER, 16 ROW 30" CYL031/CYL011(CYL41c) Port Type Rephasing Port Type Rephasing ¾"-16 O-Ring Ports 1. G Set Screw, ¼"-20 x ¼" 2. GD Cap 3. GA Rod Assembly W/Grease Fitting G Grease Fitting, 3 16", Drive-In 4. GD Gland 5. GD Piston 6. G Lock Nut, 1" A Barrel (Non-Stock Item) A. GA Cylinder Complete, 3 ¼" x 6" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) Expander, (2) O-Rings, (1) BU Ring, (1) Wiper, (1) U-Cup, (1) Piston Seal, (2) Cast Iron Rings P85 Rev. 11/07

86 WING LOCK CYLINDERS, R.H. FRONT AND L.H. REAR (CYL2d) ¾"-16 O-Ring Ports (Bottom Of Block) 1. GA Clevis 2. G Hex Jam Nut, 1 ¼"-12, Grade 2 3. GD Rod 4. GD Gland 5. A Barrel (Non-Stock Item) 6. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 7. GA Steel Hydraulic Line, " 8. G Lock Nut, 1 ¼" GD Block 10. GA Counter Balance Valve 11. G Hex Head Cap Screw, ⅜"-16 x 4 ½" G Washer, ⅜" SAE G Lock Washer, ⅜" G Hex Nut, ⅜" GD Piston 13. G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring A. GA Cylinder Complete, 4" x 3 ½" (Part Number Stamped On Barrel) B. GR Seal Kit (For Cylinder And Counter Balance Valve), Includes: (1) Wiper, (5) O-Rings, (4) BU Rings, (1) U-Cup, (1) T-Seal P86 Rev. 11/07

87 WING LOCK CYLINDERS, L.H. FRONT AND R.H. REAR (CYL2e) ¾"-16 O-Ring Ports (Bottom Of Block) 1. GA Clevis 2. G Hex Jam Nut, 1 ¼"-12, Grade 2 3. GD Rod 4. GD Gland 5. A Barrel (Non-Stock Item) 6. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 7. GA Steel Hydraulic Line, " 8. G Lock Nut, 1 ¼" GD Block 10. GA Counter Balance Valve 11. G Hex Head Cap Screw, ⅜"-16 x 4 ½" G Washer, ⅜" SAE G Lock Washer, ⅜" G Hex Nut, ⅜" GD Piston 13. G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring A. GA Cylinder Complete, 4" x 3 ½" (Part Number Stamped On Barrel) B. GR Seal Kit (For Cylinder And Counter Balance Valve), Includes: (1) Wiper, (5) O-Rings, (4) BU Rings, (1) U-Cup, (1) T-Seal P87 Rev. 11/07

88 TRANSPORT LATCH CYLINDER, ALL SIZES CYL035/CYL050(CYL9c) 1. G Internal Retaining Ring, " 2. GD Gland 3. GD Rod 4. GD Piston 5. G Lock Nut, ½" GD Barrel (Non-Stock Item) 7. GD Tension Bushing, 1" x 2" Long 8. GD End Cap A. GA Cylinder Complete, 1 ½" x 2 ½" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (3) O-Rings, (2) BU Rings, (1) Wiper, (1) T-Seal, (1) Bronze Bushing, (1) U-Cup TONGUE LOCK CYLINDER, ALL SIZES CYL035(CYL9d) 1. G Internal Retaining Ring, " 2. GD Gland 3. GD Rod 4. GD Piston 5. G Lock Nut, ½" GD Barrel (Non-Stock Item) 7. GD Tension Bushing, 1" x 2" Long 8. GD End Cap A. GA Cylinder Complete, 1 ½" x 2 ½" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (3) O-Rings, (2) BU Rings, (1) Wiper, (1) T-Seal, (1) Bronze Bushing, (1) U-Cup P88 Rev. 11/07

89 TONGUE CYLINDER, 12 ROW 30" (CYL12f) ¾"-16 O-Ring Port And ¾"-16 JIC Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 7. GA Barrel 8. GA Steel Hydraulic Line, " 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 60" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal W/BU Rings P89 Rev. 11/07

90 TONGUE CYLINDER, 16 ROW 30" CYL036(CYL12f) ¾"-16 O-Ring Port And ¾"-16 JIC Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 7. GA Barrel 8. GA Steel Hydraulic Line, " 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 84" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal W/BU Rings ROW MARKER (Cushion) CYLINDER (CYL3d) 7 16"-20 O-Ring Port ¾"-16 O-Ring Port 1. GA Rod Assembly 2. GD Gland 3. A Barrel (Non-Stock Item) 4. G Cotter Pin, ⅛" x 1 ¾" 5. GD Piston 6. G Slotted Hex Nut, ⅞"-14 A. GA Cylinder Complete, 2 ½" x " (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) T-Seal, (2) O-Rings, (1) BU Ring, (1) Cast Iron Ring, (1) Wiper, (1) Lip Seal P90 Rev. 11/07

91 VALVE BLOCK - LOCATED ON FRONT CENTER FRAME VVB036(TWL24j) SDS ONLY BP REG IN 1. G Swivel Elbow, 45, ⅞"-14 Male JIC To Female 2. G Swivel Tee, ⅞"-14 JIC 3. G Hex Head Cap Screw, ⅜"-16 x 3 ½" G Lock Nut, ⅜" G Connector W/O-Ring, ⅞"-14 Male JIC To ¾"-16 O-Ring GR O-Ring 5. GR Plug W/Stop Pin 6. - See Flow Control Valve, Page P97 7. GR Socket Plug 8. - See Check Valve, Page P97 9. G Elbow W/O-Ring, 90, ⅞"-14 Male JIC To ¾"-16 O-Ring GR O-Ring See Pressure Relief Valve, Page P Block (Non-Stock Item) 12. G Swivel Elbow, 90, ⅞"-14 Male JIC To Female A. GR Seal Kit, Includes: (12) O-Rings, (2) BU Rings B. GA Valve Block Assembly (Items 5, 6, 7, 8, 10, And 11) P91 Rev. 11/07

92 VALVE BLOCK - LOCATED ON FRONT CENTER FRAME VVB036(TWL241) 1. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 2. GD Valve Block 3. G Hex Head Cap Screw, 5 16"-18 x 2 ¼" G Lock Washer, 5 16" G Hex Nut, 5 16" See Pressure Relief Valve, Page P98 P92 Rev. 11/07

93 VALVE BLOCK - LOCATED ON R.H. SIDE OF CENTER PIVOT VVB036(TWL208a) D13 D14 D10 D13 D12 D15 D12 1. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 2. GD Block 3. - See Pilot Operated Check Valve, Page P99 4. G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring 5. G Hex Head Cap Screw, ⅜"-16 x 4 ½" G Lock Nut, ⅜" G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 7. G6801-LL-08 1 X-Long Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring P93 Rev. 11/07 Rev. 11/06

94 VALVE BLOCKS - LOCATED ON REAR CENTER FRAME VVB034(TWL25d) SDS Only P94 Rev. 11/07

95 VALVE BLOCKS - LOCATED ON REAR CENTER FRAME 1. G Hex Head Cap Screw, 5 16"-18 x 2 ¾" G Lock Washer, 5 16" 2. 2 See Check Valve, Page P See Solenoid Valve, Page P98 4. GD Block 5. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 6. G Connector W/O-Ring, ⅞"-14 Male JIC To O-Ring GR O-Ring 7. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To ⅞"-14 O-Ring GR O-Ring 8. G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring 9. 2 See Flow Control Valve, Page P GD Block 11. G6408-H06-O 6 Hex Socket Head Plug W/O-Ring, 9 16"-18 O-Ring GR O-Ring 12. G Connector W/O-Ring, ¾"-16 Male JIC To ⅞"-14 O-Ring GR O-Ring 13. G Plug W/O-Ring, ⅞"-14 O-Ring GR O-Ring 14. GD Cover 15. G Phillips Pan Head Machine Screw, No x ½", Stainless Steel 16. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Washer, 5 16" 17. G Hex Head Cap Screw, 5 16"-18 x ½" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Terminal Strip W/Screws, No. 6, 14 Terminal GR Screw, No x ¼" 19. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel 20. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel 21. GA Terminal Strip Mount 22. GD Sleeve, 1" Long 23. GA Terminal Strip W/Screws, No. 6, 4 Terminal GR Screw, No x ¼" 24. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel G Hex Nut, No. 8-32, Stainless Steel P95 Rev. 11/07

96 VALVE BLOCK - LOCATED ON HITCH VVB035(TWL26f) 1. GD Block 2. - See Solenoid Valve, Page P See Pressure Relief Valve, Page P98 4. G Connector W/O-Ring, 9 16"-18 Male JIC To O-Ring GR O-Ring 5. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 6. G Connector W/O-Ring, ⅞"-14 Male JIC To O-Ring GR O-Ring 7. G Swivel Elbow, 90, 9 16"-18 Male JIC To Female 8. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To O-Ring GR O-Ring 9. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 10. G6408-H06-O 2 Hex Socket Head Plug W/O-Ring, 9 16"-18 O-Ring GR O-Ring See Hose Take-Up, Pages P54 And P GD Terminal Strip Mount 13. G Phillips Flat Head Machine Screw, No x ⅝", Stainless Steel 14. GA Terminal Strip W/Screws, No. 6, 8 Terminal GR Screw, No x ¼" 15. G Phillips Pan Head Machine Screw, No x ⅝", Stainless Steel See Electrical Components, Pages P104-P107 P96 Rev. 11/07

97 FLOW CONTROL VALVE (Located In Valve Block On Front Center Frame) (TWL28a) SDS ONLY A. GR Flow Control Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring PRESSURE RELIEF VALVE (Located In Valve Block On Front Center Frame) (TWL24c) SDS ONLY 1. GR Cap 2. GR Compression Spring 3. GR Spring Guide 4. GR O-Ring CHECK VALVE (Located In Valve Block On Front Center Frame) (TWL24b) A. GR Check Cartridge B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring SDS ONLY P97 Rev. 11/07

98 SOLENOID VALVE VVB019(TWL27c/TWL18/PLTR75c/A9481) Solenoid Valve Holds Load In One Direction 1. GR Special Hex Nut, ½" G1K274 1 Coil Kit W/Contacts, Housings And Fork Terminals GD Housing, Black GD Contact G Fork Terminal 3. GR Cartridge A. G1K275 - Solenoid Valve Kit W/Contacts, Housings And Fork Terminals GD Housing, Black GD Contact G Fork Terminal B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring Contact Fork Terminal Housing FLOW CONTROL VALVE (Located In Valve Block On Rear Center Frame) VVB020(TWL28) A. GA Flow Control Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring PRESSURE RELIEF VALVE (Located In Valve Block On Hitch And In Valve Block On Front Center Frame) VVB020(TWL29) A. GA Pressure Relief Valve, 1000 PSI B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring P98 Rev. 11/07

99 CHECK VALVE (Located In Valve Block On Rear Center Frame) VVB020(TWL30) A. GA Check Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring PILOT OPERATED CHECK VALVE (Located In Valve Block On R.H. Side Of Front Center Frame) VVB020(TWL30b) A. GA Pilot Operated Check Valve B. GR Seal Kit, Includes: (3) O-Rings, (4) BU Rings P99 Rev. 11/07

100 HYDRAULIC HOSES AND FITTINGS ON HITCH (A10125a) SDS ONLY C2 D2 IN BP C2 D2 A2 B2 A3 B3 Transport Latch Cylinder Valve Block - Located On Hitch NOTE: See Page P96 For Additional Information C2 A3 A2 B2 B3 D2 Tongue Cylinder B5 A5 A4 B4 A1 B5 A5 C1 B1 A6 B6 D1 B6 A6 Tongue Lock Cylinder A4 B4 C1 A1 B1 Bulkhead Plate - Located Behind Center Pivot D1 Rotation Cylinder P100 Rev. 11/07

101 HYDRAULIC HOSES AND FITTINGS ON HITCH 1. GD ISO Coupler 2. *A Hose Assembly, ½" x 147", 12 Row 30" *A Hose Assembly, ½" x 178", 16 Row 30" 3. *A Hose Assembly, ⅜" x 191", 12 Row 30" *A Hose Assembly, ⅜" x 246", 16 Row 30" 4. G Union, ⅞"-14 Male JIC 5. *A Hose Assembly, ½" x 43", 12 Row 30" *A Hose Assembly, ½" x 68", 16 Row 30" 6. *A Hose Assembly, ¼" x 112", 12 Row 30" *A Hose Assembly, ¼" x 168", 16 Row 30" 7. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 8. G Swivel Elbow, 45, 9 16"-18 Male JIC To Female 9. G Connector W/O-Ring, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 10. *A Hose Assembly, ¼" x 40" 11. *A Hose Assembly, ½" x 133", 12 Row 30" *A Hose Assembly, ½" x 139", 16 Row 30" 12. *A Hose Assembly, ⅜" x 132", 12 Row 30" *A Hose Assembly, ⅜" x 140", 16 Row 30" 13. G Bulkhead Tube Union, ⅞"-14 Male JIC 14. G Bulkhead Tube Union, ¾"-16 Male JIC 15. *A Hose Assembly, ¼" x 164", 12 Row 30" *A Hose Assembly, ¼" x 173", 16 Row 30" 16. *A Hose Assembly, ⅜" x 68", 12 Row 30" *A Hose Assembly, ⅜" x 80", 16 Row 30" 17. *A Hose Assembly, ½" x 198", 12 Row 30" (SDS Only) *A Hose Assembly, ½" x 250", 16 Row 30" (SDS Only) 18. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 19. *A Hose Assembly, ¾" x 144" 20. G Lock Nut, ¾" G Lock Nut, ⅞" *A Hose Assembly, ¾" x 198", 12 Row 30" (SDS Only) *A Hose Assembly, ¾" x 250", 16 Row 30" (SDS Only) 23. *A Hose Assembly, ½" x 144" 24. G Lock Nut, ⅞" *A Hose Assembly, ½" x 191", 12 Row 30" 26. *A Hose Assembly, ½" x 246", 12 Row 30" * Hydraulic hose is not stocked by KINZE Repair Parts, but can be made available on a special order basis. Call for quote. P101 Rev. 11/07

102 HYDRAULIC HOSES AND FITTINGS ON PLANTER FRAME (TWL207g) 16 Row 30" Shown (Two Wing Lift Cylinders Per Wing) 12 Row 30" (One Wing Lift Cylinder Per Wing) Stabilizer Cylinder Valve Block - Located On Front Center Frame NOTE: See Page P90 For Additional Information Stabilizer Cylinder Center Lift Cylinder REAR L.H. MASTER Center Lift Cylinder FRONT R.H. MASTER L.H. Row Marker Cylinder WITH EVEN-ROW PUSH ROW UNIT B5 A5 L.H. Wing Lock Cylinder (Front) S5 S5 S4 S4 D1 L.H. Wing Lock Cylinder (Rear) D4 C2 L.H. Wing Lift Cylinder(s) SLAVE 1. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 2. G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 3. *A Hose Assembly, ⅜" x 82", 12 Row 30" *A Hose Assembly, ⅜" x 104", 16 Row 30" 4. *A Hose Assembly, ⅜" x 168", 12 Row 30" *A Hose Assembly, ⅜" x 210", 16 Row 30" 5. G Tee, ¾"-16 Male JIC 6. G Swivel Elbow, 45, ¾"-16 Male JIC To Female 7. G6400-L Long Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 8. G Swivel Elbow, 90, ¾"-16 Male JIC To Female 9. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 10. *A Hose Assembly, ⅜" x 40" 11. *A Hose Assembly, ⅜" x 8" 12. G Swivel Tee, ¾"-16 JIC 13. G Reducer, ¾"-16 Female JIC To 9 16"-18 Male JIC 14. G Connector W/O-Ring, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 15. *A Hose Assembly, ⅜" x 26" 16. *A Hose Assembly, ⅜" x 204", 12 Row 30" *A Hose Assembly, ⅜" x 225", 16 Row 30" 17. *A Hose Assembly, ⅜" x 110" 18. *A Hose Assembly, ⅜" x 56" 19. *A Hose Assembly, ⅜" x 52" P102 Rev. 11/07

103 HYDRAULIC HOSES AND FITTINGS ON PLANTER FRAME A1 D1 C1 B1 BP IN Hydraulic Motor - Left Side (SDS Only) Hydraulic Motor - Right Side (SDS Only) Valve Block - Located On Front Center Frame (SDS Only) NOTE: See Page P91 For Additional Information. DIRECTION OF TRAVEL Bulkhead Plate - Located Behind Center Pivot NOTE: See Pages P48 And P49 For Additional Information Valve Blocks - Located On Rear Center Frame NOTE: See Pages P94 And P95 For Additional Information. IN BP REG Valve Block - Located On R.H. Side Of Center Pivot NOTE: See Page P93 For Additional Information. D13 D14 D15 D12 D13 D12 S4 D5 S4 S5 S5 R.H. Wing Lock Cylinder (Front) R.H. Wing Lock Cylinder (Rear) A4 B4 R.H. Row Marker Cylinder C2 D4 D2 C1 D3 C3 D5 C3 R.H. Wing Lift Cylinder(s) SLAVE A5 B5 A7 B7 A4 B4 A6 B6 B1 A1 20. G Lock Nut, ¾" G Bulkhead Tee, ¾"-16 JIC 22. *A Hose Assembly, ⅜" x 34" 23. *A Hose Assembly, ½" x 91" 24. G Union, ¾"-16 Male JIC 25. G Elbow W/O-Ring, 90, ⅞"-14 Male JIC To O-Ring GR O-Ring 26. *A Hose Assembly, ½" x 76" 27. *A Hose Assembly, ¾" x 29" 28. *A Hose Assembly, ¾" x 111" (SDS Only) 29. *A Hose Assembly, ½" x 111" (SDS Only) 30. *A Hose Assembly, ⅜" x 76" 31. *A Hose Assembly, ½" x 51" 32. *A Hose Assembly, ½" x 30" 33. *A Hose Assembly, ¼" x 36" 34. *A Hose Assembly, ⅜" x 62" 35. G Swivel Tee, ¾"-16 JIC 36. G6801-LL-10 2 X-Long Elbow W/O-Ring, 90, ⅞"-14 Male JIC To O-Ring GR O-Ring 37. *A Hose Assembly, ⅜" x 18" 38. *A Hose Assembly, ⅜" x 15" 39. *A Hose Assembly, ⅜" x 48" * Hydraulic hose is not stocked by KINZE Repair Parts, but can be made available on a special order basis. Call for quote. P103 Rev. 11/07

104 ELECTRICAL COMPONENTS (Conventional Planters) (TWL19a/TWL18/ELC14/ELC3a/ELC5c/MTR27a/TWL26e/ELC8/A9481/A10101a/ELC4/TWL23/A9202a/ELC39/A8705/ELC10c) Amber Red NOTE: See Wing Frame, Pages P58 And P59, For Light Brackets Socket Contact (Tractor) Pin Contact (Planter) Sealing Plug For Planter Harness For Tractor Harness Planter Harness Harness Extension Tractor Harness 1. GA Ground Clamp 2. GD Contact 3. GD Housing, Black GD Housing, Red P104 Rev. 11/07

105 ELECTRICAL COMPONENTS (Conventional Planters) 4. GA Double Light Assembly (Shown) GA Double Light Assembly GR Red Lens GR Amber Lens GR Cover GR Rubber Grommet (4) GR Lamp Unit GR Bulb 5. GA Wiring Harness W/7 Terminal Female Connector, 786" (2 Light Connections), 12 Row 30" GA Wiring Harness W/7 Terminal Female Connector, 882" (2 Light Connections), 16 Row 30" GA Terminal Female Connector 6. GD Insulated Clamp, ⅜" GD Insulated Clamp, 11 16" 7. GD Socket Contact, No GD Pin Contact, No GD Sealing Plug, No GA Connector W/Cable Clamp, 23 Pin Capacity 11. GA Dust Cap W/Chain 12. GA Dust Cap W/Chain 13. GA Connector W/Cable Clamp, 23 Socket Capacity 14. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 15. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 16. GD Sealing Plug 17. GD Jumper, 7 16" 18. GA Dust Plug (Black) 19. GA Jumper Wire W/Fork Terminal, 13" G Fork Terminal 20. GA Wiring Harness W/Dust Cap, 516", 12 Row 30" GA Wiring Harness W/Dust Cap, 636", 16 Row 30" 21. GA Harness Extension W/Dust Caps, 180" 22. G7633X - Backlit Control Console Assembly W/Mounting Brackets, Short Harness W/Dust Cap And Power Cable G7639X - Backlit Control Console Assembly W/Mounting Brackets, Short Harness W/Dust Cap And Power Cable, (Planters Equipped With Two-Speed Point Row Clutches) 23. GR Pan Head Screw, No x ½" 24. GA Fuse Holder W/Spade, " 25. GD Fuse, 15 Amp, Type AGC 26. GD O-Ring (If Applicable) 27. GR Hex Face Nut, 15 32"-32 GR Internal Tooth Lock Washer, 15 32" 28. GA Switch, 3 Position Toggle, On-Off-On 29. GA Indicator Light 30. GD Fuse, MDL 10 Amp Delay Action 31. GA Cover Plate (Shown) GA Cover Plate, (Planters Equipped With Two-Speed Point Row Clutches) 32. GA Switch, Push Button W/Transformer 33. GA Switch, 3 Position Toggle, Momentary On-Off-Momentary On 34. GA Switch, 2 Position Toggle, On-Off 35. GD Mounting Bracket 36. GA Knob G Washer, ¼" SAE GR Cage Nut, ¼" G1K267 - Power Lead Adapter Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (3) Male Terminal Pins 38. G1K268 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (1) Lock Ring, (3) Female Terminal Pins 39. GA Power Lead Adapter 40. GA Wiring Harness W/Dust Cap And Power Cable NOTE: See Point Row Clutch or Two-Speed Point Row Clutch for R.H. and L.H. wiring harness for the point row clutches. See KPM I Electronic Seed Monitor or KPM II Stack-Mode/KPM III Electronic Seed Monitors for those components. P105 Rev. 11/07

106 ELECTRICAL COMPONENTS (SDS Planters) (TWL19a/TWL18/ELC14/TWL23/A9202a/ELC39/ELC3a/ELC5c/MTR27a/TWL26e/ELC8/A9481/A10556/A10558/A3072/A10101a/ELC4/A10189c/A10189/ELC34/ELC35/ELC10d) Amber Red NOTE: See Wing Frame, Pages P58 And P59, For Light Brackets Socket Contact (Tractor) Pin Contact (Planter) Sealing Plug For Planter Harness For Tractor Harness Two-Speed Point Row Clutch Only Planter Harness Harness Extension Tractor Harness 1. GA Ground Clamp 2. GD Contact 3. GD Housing, Black GD Housing, Red P106 Rev. 11/07

107 ELECTRICAL COMPONENTS (SDS Planters) 4. GA Double Light Assembly (Shown) GA Double Light Assembly GR Red Lens GR Amber Lens GR Cover GR Rubber Grommet (4) GR Lamp Unit GR Bulb 5. GA Wiring Harness W/7 Terminal Female Connector, 786" (2 Light Connections), 12 Row 30" GA Wiring Harness W/7 Terminal Female Connector, 882" (2 Light Connections), 16 Row 30" GA Terminal Female Connector 6. GD Insulated Clamp, ⅜" GD Insulated Clamp, 11 16" 7. GD Socket Contact, No GD Pin Contact, No GD Sealing Plug, No GA Connector W/Cable Clamp, 23 Pin Capacity 11. GA Dust Cap W/Chain 12. GA Dust Cap W/Chain 13. GA Connector W/Cable Clamp, 23 Socket Capacity 14. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 15. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 16. GD Sealing Plug 17. GD Jumper, 7 16" GD Jumper, ⅜" 18. GA Dust Plug (Black) 19. GA Jumper Wire W/Fork Terminal, 13" G Fork Terminal 20. GA Wiring Harness W/Dust Cap, 516", 12 Row 30" GA Wiring Harness W/Dust Cap, 636", 16 Row 30" 21. GA Harness Extension W/Dust Caps, 180" 22. G7830X - Backlit Control Console Assembly W/Mounting Brackets, Short Harness W/Dust Cap And Power Cable (Items 23-43) 23. GR Pan Head Screw, No x ½" 24. GA Fuse Holder W/Spade, " 25. GD Fuse, 15 Amp, Type AGC 26. GD O-Ring 27. GR Hex Face Nut, 15 32"-32 GR Internal Tooth Lock Washer, 15 32" 28. GA Switch, 3 Position Toggle, On-Off-On 29. GA Indicator Light, Red 30. GD Fuse, MDL 10 Amp Delay Action 31. GA Cover Plate 32. GA Switch, Push Button W/Transformer 33. GA Switch, 3 Position Toggle, Momentary On-Off-Momentary On 34. GA Switch, 2 Position Toggle, On-Off 35. GD Mounting Bracket 36. GA Knob G Washer, ¼" SAE GR Cage Nut, ¼" GA Indicator Light, Amber 38. GD Fuse, 2 Amp Delay Action 39. GA Tachometer 40. G1K267 - Power Lead Adapter Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (3) Male Terminal Pins 41. G1K268 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (1) Lock Ring, (3) Female Terminal Pins 42. GA Power Lead Adapter 43. GA Wiring Harness W/Dust Cap And Power Cable 44. GA Jumper Wire, 5", Red (Two-Speed Point Row Clutch) 45. GA Indicator Light, Green (Two-Speed Point Row Clutch) 46. GA Jumper Wire, 8", Black (Two-Speed Point Row Clutch) 47. GA Jumper Wire, 5", Red (Two-Speed Point Row Clutch) NOTE: See Point Row Clutch or Two-Speed Point Row Clutch for R.H. and L.H. wiring harness for the point row clutches. See KPM I Electronic Seed Monitor or KPM II Stack-Mode/KPM III Electronic Seed Monitors for those components. P107 Rev. 11/07

108 AUXILIARY WORK LIGHTS PACKAGE (A9689b/MTR27t/A10924) P108 Rev. 11/07

109 AUXILIARY WORK LIGHTS PACKAGE 1. GA Work Light Assembly 2. GD Bracket, 4 ¼" x 4", 12 Row 30" GD Bracket, " x 4 ⅛", 16 Row 30" 3. G T-Bolt Clamp, 3 ½" Stainless Steel, 12 Row 30" G T-Bolt Clamp, 4 ¼" Stainless Steel, 16 Row 30" 4. GA Wiring Harness, 348" 5. G1K321-2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female Housings, (6) Pin Contacts, (6) Seals 6. G1K320-2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, (6) Socket Contacts, (6) Seals P109 Rev. 11/07

110 KPM I ELECTRONIC SEED MONITOR (MTR46b) Power Lead Adapter Adapter Harness Blue Extension Harness Planter Harness Blue Junction Y-Harness P110 Rev. 11/07

111 KPM I ELECTRONIC SEED MONITOR 1. GA Power Lead Adapter 2. G1K267 - Power Lead Adapter Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (3) Male Terminal Pins 3. G1K268 - Console Cable Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (1) Lock Ring, (3) Female Terminal Pins 4. GA KPM I Backlit Console W/Mounting Bracket, Fuse Holder And Fuse, Power Lead Adapter (Item 1), Brush (Item 10) And Dust Plug (Item 16) GR Mounting Bracket, KPM I GR Console Mounting Bracket Hardware Package (Includes 2 Knobs And ¼" Hardware) GA Fuse Holder GD Fuse 5. - Included In Tractor/Planter Wiring Harnesses, See Pages P104-P GA Planter Harness W/Dust Caps, 12 Row (16 Connectors) GA Planter Harness W/Dust Caps, 16 Row (20 Connectors) GD Dust Cap 7. GA Seed Tube W/Computerized Sensor (Shown) GR Sensor Only GA Seed Tube (With Holes For Sensor Installation) 8. GR Brush 9. G Hex Head Cap Screw, ¼"-20 x ½" G Washer, ¼" SAE G Lock Washer, ¼" G Hex Nut, ¼" GA Adapter Harness, 1' 11. GA Extension Harness W/Dust Cap, 15' GA Extension Harness W/Dust Cap, 30' GD Dust Cap 12. GA Junction Y-Harness W/Dust Cap GD Dust Cap 13. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals G1K362-3-Pin Female Connector Kit (Blue), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 14. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals G1K363-3-Pin Male Connector Kit (Blue), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 15. GD Sealing Plug 16. GA Dust Plug (Black) GA Dust Plug (Blue) 17. GA Dust Plug (Black) GA Dust Plug (Blue) P111 Rev. 11/07

112 KPM II STACK-MODE/KPM III ELECTRONIC SEED MONITORS (MTR43jj/A10901a) Shaft Rotation Sensor Radar Distance Sensor Magnetic Distance Sensor (MDS) Power Lead Adapter SMM Blue Adapter Harness Radar Y-Cable Extension Harness Junction Y-Harness KPM II Stack-Mode Blue KPM III Planter Harness Acre Counter Switch Kit Blue Magnetic Distance Sensor (MDS) Adapter 1. GA Radar Distance Sensor W/20' Cable 2. GA Radar Sensor Pipe/Mounting Bracket Package 3. G1K323-4-Pin Connector Kit W/Female Housing, (4) Pins And (1) Cable Clamp 4. GA Magnetic Distance Sensor 5. GD Magnetic Distance Sensor Pulse Wheel 6. GD Insulated Clamp, ⅜" 7. GD Bracket 8. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Spring Wave Washer 10. GA SMM Backlit Console W/Mounting Bracket And Dust Plug (Item 34) GR Mounting Bracket, KPM II Stack-Mode And SMM Consoles GR Console Mounting Bracket Hardware Package (Includes 2 Knobs And ¼" Hardware) 11. GA Power Lead Adapter P112 Rev. 11/07

113 KPM II STACK-MODE/KPM III ELECTRONIC SEED MONITORS 12. GA Monitor/Radar Adapter Cable, 10" 13. G1K267 - Power Lead Adapter Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (3) Male Terminal Pins 14. G1K268 - Console Cable Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (1) Lock Ring, (3) Female Terminal Pins 15. GA KPM II Backlit Console W/Mounting Bracket, Fuse Holder And Fuse, Power Lead Adapter (Item 11), Brush (Item 23), Dust Plug (Item 34) And Monitor/Radar Adapter, 10" (Item 12) GR Mounting Bracket, KPM II GR Console Mounting Bracket Hardware Package (Includes 4 Knobs And ¼" Hardware) GA Fuse Holder GD Fuse 16. G1K322-4-Pin Connector Kit W/Male Housing, (4) Female Socket Contacts And (1) Cable Clamp Included In Tractor/Planter Wiring Harnesses, See Pages P104-P GA Planter Harness W/Dust Caps, 12 Row (16 Connectors) GA Planter Harness W/Dust Caps, 16 Row (20 Connectors) GD Dust Cap 19. GA Seed Tube W/Computerized Sensor GR Sensor Only GA Seed Tube (With Holes For Sensor Installation) 20. GA Magnetic Distance Sensor Adapter (Analog To Digital) 21. GA KPM III Backlit Console W/Brush (Item 23), Dust Plug (Item 34), Mounting Bracket Assembly, Console Mounting Bracket Hardware And Power Harness GR Mounting Bracket Assembly, Includes: (2) Mounting Brackets, (2) Connector Halves, (1) Compression Spring, (1) Tension Knob, (1) ¼"-20 x 1 ¾" Hex Head Cap Screw, (1) ¼" Plastic Washer, (1) ¼" Steel Washer GR Console Mounting Bracket Hardware Package, Includes: (3) No x ⅝" Hex Socket Pan Head Screws, (3) ¼" Lock Washers GR Power Harness 22. G Hex Head Cap Screw, ¼"-20 x ½" G Washer, ¼" SAE G Lock Washer, ¼" G Hex Nut, ¼" GR Brush 24. GR Radar Y-Cable (Used To Connect Radar Distance Sensor For Multiple Functions) 25. GA Adapter Harness, 1' 26. GA Extension Harness W/Dust Cap, 15' GA Extension Harness W/Dust Cap, 30' GD Dust Cap 27. GA Junction Y-Harness W/Dust Cap GD Dust Cap 28. G1K321-2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female Housings, (6) Pin Contacts, (6) Seals 29. G1K320-2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, (6) Socket Contacts, (6) Seals 30. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals G1K362-3-Pin Female Connector Kit (Blue), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 31. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals G1K363-3-Pin Male Connector Kit (Blue), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 32. GD Sealing Plug 33. G1K249 - Acre Counter Switch Kit 34. GA Dust Plug (Black) GA Dust Plug (Blue) 35. GA Dust Plug (Black) GA Dust Plug (Blue) 36. GR Rotation Sensor 37. GD Mount 38. G Pan Head Screw, No x 1 ¼" G Washer, No. 10 SAE G Hex Nut, No GD Cover 40. GD Spring 41. GD Spring Mount 42. GR Actuator 43. G Pan Head Machine Screw, No x 1 ¼", Stainless Steel G Lock Washer, No. 8, Internal/External, Stainless Steel G Hex Nut, No. 8-32, Stainless Steel 44. G1K364 - Rotation Sensor Mount Kit, Includes: (2) Mounts, (2) GD " x 7" U-Bolts, (4) G10228 Lock Washers, (4) G10102 Hex Nuts, (1) Instruction A. GA Magnetic Distance Sensor And Mounting Package (Items 4-9) P113 Rev. 11/07

114 BULK FILL SEED HOPPER MONITOR COMPONENTS (TWL230a/A9952/A7287/A9953b/TWL24f) Jumper Wire Between Terminal Strips On Valve Block On Rear Center Frame (See Pages P94 And P95) Hopper Harness P114 Rev. 11/07

115 BULK FILL SEED HOPPER MONITOR COMPONENTS 1. GD Speed Sensor Shaft 2. GD Sensor Wheel 3. G Machine Bushing, ⅝", 14 Gauge 4. GD Bracket 5. GA Speed Sensor Assembly 6. GD Nut, M12 x 1" 7. GA Bearing 8. GD Bearing Housing 9. G Sheet Metal Screw, ¼"-14 x ½" 10. G Hex Head Cap Screw, ¼"-20 x ⅝" G Lock Nut, ¼"-20, Grade B 11. G Hex Nut, ⅝" GD Dust Cap 13. GA Hopper Harness, 84" 14. GA Jumper Wire W/Fork Terminals, 13" See Bulk Seed Hopper Auger Manifold Assembly, Pages P20 And P GA Seed Flow Sensor Assembly 17. GD Power Cable Connector 18. G Machine Bushing, ⅞", 14 Gauge 19. GD Lock Nut, ½" Conduit P115 Rev. 11/07

116 INTERPLANT PUSH ROW UNIT DRIVE (TWL33r/TWL247aa/TWL246bb) L.H. Side Shown Special Push Row Unit Drive Kit (For Use W/Frame Mounted Coulters On Pull Row Units) 1. GD Hex Shaft, ⅞" x 48" (No Holes), R.H. Center Frame, 12 Row 30" And 16 Row 30" GD Hex Shaft, ⅞" x 66" (No Holes), L.H. Center Frame And R.H. Wing, 12 Row 30"/L.H. Center Frame, 16 Row 30" GD Hex Shaft, ⅞" x 76" (No Holes), L.H. Wing, 12 Row 30" GD Hex Shaft, ⅞" x 124" (No Holes), R.H. Wing, 16 Row 30" GD Hex Shaft, ⅞" x 138" (No Holes), L.H. Wing, 16 Row 30" P116 Rev. 11/07

117 INTERPLANT PUSH ROW UNIT DRIVE 2. GD Lock Clamp 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 4. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" GA Hanger Bearing, ⅞" Hex Bore 6. G Machine Bushing, 1", 10 Gauge (As Required) 7. GA Sprocket, 19 Tooth 8. GA Mount 9. GD U-Bolt, 7" x 5" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 2 ¼" G Washer, ½" SAE G Lock Washer, ½" G Hex Nut, ½" GA Sprocket W/Bearing, 18 Tooth 12. GD Spacer, 1 ¼" O.D. x ½" Long (If Applicable) 13. G Chain, No. 40, 226 Pitch Including Connector Link GR Connector Link, No G Spring Pin, 5 32" x 7 16" 15. GR Bushing 16. GR Sprocket, 19 Tooth 17. GR Lock Collar 18. G Hex Socket Set Screw, ⅜"-16 x ¾" 19. GR Pin 20. GR Spring 21. GR Knurled Collar 22. GR Compression Spring 23. GR Drive Shaft 24. GR Shim 25. G External Inverted Snap Ring, 1 ½" 26. GA Idler Mount, R.H. 27. GA Idler Mount, L.H. 28. GA Bearing Mount, R.H. 29. GA Bearing Mount, L.H. 30. GA Sprocket, 17 Tooth 31. G Flangette 32. G Bearing, ⅞" Hex Bore, Spherical 33. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" GD Hex Shaft, ⅞" x 30" (No Holes) 35. GD U-Bolt, 5" x 7" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 7" G Lock Washer, ½" G Hex Nut, ½" G Chain, No. 40, 102 Pitch Including Connector Link GR Connector Link, No G Chain, No. 40, 144 Pitch Including Connector Link GR Connector Link, No G Hex Head Cap Screw, ½"-13 x 2" G Washer, ½" SAE G Lock Washer, ½" G Hex Nut, ½" GD Coupler, 4" 41. GD Hex Shaft, ⅞" x 30" (No Holes), Even-Row Push Row Unit, 12 Row 30" And 16 Row 30" 42. GA U-Joint, Female, 10 ¼" 43. GA U-Joint, Male, 12 ¼" 44. G Square Head Set Screw, ⅜"-16 x ⅝" 45. GD Hose Protector A. GA Clutch Sprocket Assembly, 19 Tooth (Items 14-25) B. G1K269 - Lock Clamp Kit (Items 2 And 3) P117 Rev. 11/07

118 DOUBLE DISC FERTILIZER OPENER AND MOUNT FOC007(PT25f/A10119/FRTZ208) To Pump To Opener Optional - Liquid Fertilizer Only P118 Rev. 11/07

119 DOUBLE DISC FERTILIZER OPENER AND MOUNT (Per Assy.) 1. GA Bracket 2. G Grease Fitting, ¼"-28, Taper Threads 3. G Cotter Pin, ⅛" x 1" 4. GD Lockup Pin 5. GD Hex Head Adjusting Bolt, ⅝"-18 x 3 ¼" G Hex Jam Nut, ⅝"-18, Grade 2 6. GA Spring 7. GD Bushing, 41 64" I.D. x 3 ½" Long 8. G Machine Bushing, ⅝" (.030" Thick) 9. G Rivet, ¼" x " 10. GD Dust Cap 11. G Hex Jam Nut, ⅝"-11, Grade 2 G Hex Jam Nut, ⅝"-11, L.H. Threads, Grade G Special Machine Bushing, ⅝" x 1" O.D. 13. GB Hub 14. GA Bearing 15. GD Disc Blade, 3.5 mm x 15" 16. GD Inner Scraper 17. GA Mount 18. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Washer, 5 16" 19. GA Check Valve, Low Rate 20. GD Extension 21. G Hose Clamp, No GA Drop Tube, Liquid Fertilizer 23. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Washer, 5 16" SAE G Lock Nut, 5 16"-18, Grade GA Shank 25. GA Scraper Mount 26. GD Scraper 27. G Carriage Bolt, ⅜"-16 x 1" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 4 ½" G Lock Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 5" G Lock Nut, ⅝" GD U-Bolt, 1 ½" x 2 ½" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GA Mount W/U-Bolts GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝"-11 A. GA Disc Blade And Bearing Assembly (Items 9 And 13-15) P119 Rev. 11/07

120 HD SINGLE DISC FERTILIZER OPENER (Soil Press Wheel) (TWL35d/TWL35b) P120 Rev. 11/07

121 HD SINGLE DISC FERTILIZER OPENER (Soil Press Wheel) (Per Assy.) 1. GD J-Bolt, ½"-13 G Lock Washer, ½" G Hex Nut, ½" See HD Single Disc Fertilizer Opener (Blade And Drop Tube), Pages P122 And P GD Lockup Bar 4. G Hex Head Cap Screw, ⅝"-11 x 3" 5. G Flanged Whiz Lock Screw, 5 16"-18 x ⅝", No Serration G Serrated Flange Nut, 5 16" GD Half Wheel Cover, Nylon 7. GA Bearing 8. GD Offset Tire 9. GD Half Wheel 10. G Hex Head Cap Screw, ½"-13 x ¾" G Lock Washer, ½" G Washer, ½" USS 11. G Lock Washer, ⅝" 12. G Machine Bushing, 1" (.048" Thick) 13. G Clevis Pin, ½" x 1 ¾" G Cotter Pin, ⅛" x ¾" 14. GD Yoke 15. G Washer, ⅝" SAE See HD Single Disc Fertilizer Opener (Blade And Drop Tube), Pages P122 And P GD Pivot Pin 18. G Spring Pin, ⅜" x 2" 19. GA Wheel Arm W/Grease Fitting, R.H. GA Wheel Arm W/Grease Fitting, L.H. (Shown) G Grease Fitting, ¼" GD Spring 21. GB Spring Washer 22. GD Special Bolt 23. GA Mounting Angle, L.H. (As Required) (Shown) GA Mounting Angle, R.H. (As Required) 24. G Hex Head Cap Screw, ⅝"-11 x 1 ¾" G Lock Washer, ⅝" G Hex Nut, ⅝"-11 A. G1K215 - Lockup Kit (Items 1 And 3) B. GA Gauge Wheel Complete (Items 5-9) P121 Rev. 11/07

122 HD SINGLE DISC FERTILIZER OPENER (Blade And Drop Tube) FOC016/FOC007/FOC019(PT27c/FRTZ208) To Opener To Pump Optional - Liquid Fertilizer Only (Per Assy.) 1. GD Disc Blade, 18" GD Disc Blade, 20" (Optional) 2. GB Spindle 3. GA Seal 4. GA Bearing 5. GA Arm W/Cups And Washers GD Inner Cup GR Outer Cup G Washer, ⅝" SAE 6. G Hex Head Cap Screw, ⅝"-11 x 1 ½" 7. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Nut, ⅜" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 9. GD Channel 10. GB Rod Guide 11. G Grease Fitting, ⅛" NPT 12. G Hex Nut, ¾" GD Tap Block 14. GB Spring Seat 15. GA Bearing 16. G Machine Bushing, ", 10 Gauge 17. G Slotted Nut, 1" GD Dust Cap P122 Rev. 11/07

123 HD SINGLE DISC FERTILIZER OPENER (Blade And Drop Tube) (Per Assy.) 19. GD Pin G Lock Washer, 7 16" G Hex Nut, 7 16" GD Compression Spring 21. G Hair Pin Clip, No G Bolt, ½"-13 x 1 ½" G Lock Nut, ½" GD Storage Strap 24. GD Sleeve, ½" x ½" Long 25. G Washer, ½" USS 26. GA Check Valve, Low Rate 27. GA Drop Tube, L.H., Liquid Fertilizer (Shown) GA Drop Tube, R.H., Liquid Fertilizer 28. GD Bar 29. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" 30. GD Clamp 31. GD Angle, R.H. GD Angle, L.H. (Shown) 32. G Hex Head Cap Screw, ½"-13 x 2" G Lock Nut, ½" G Machine Bushing, 1 ¼", 18 Gauge (As Required) 34. G Hex Head Cap Screw, ⅝"-11 x 3 ¼" G Washer, ⅝" SAE G Lock Washer, ⅝" 35. G Grease Fitting, ¼" GD Bushing, 2 ¼" 37. G Hex Head Cap Screw, ½"-13 x 1 ¾" G Lock Nut, ½" G Cotter Pin, 3 16" x 1 ½" 39. GA Opener Mount, R.H. GA Opener Mount, L.H. (Shown) 40. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Special Bolt P123 Rev. 11/07

124 NOTCHED SINGLE DISC FERTILIZER OPENER FOC018(A10119/FRTZ209qQ/FRTZ208/B0405) STYLE A (Part Number Stamped On Part) STYLE B (Part Numbers Stamped On Part) STYLE B STYLE A To Pump To Opener Optional - Liquid Fertilizer Only P124 Rev. 11/07

125 NOTCHED SINGLE DISC FERTILIZER OPENER (Per Assy.) 1. G Hex Head Cap Screw, ½"-13 x 1 ½" G Hex Nut, ½" GB Mount 3. GB Arm, 13 ½" 4. G Grease Fitting, ¼" GD Bushing, ¾" O.D. x ½" Long 6. GA Compression Spring Assembly 7. G Hex Head Cap Screw, ⅜"-16 x 1 ¾" G Washer, ⅜" USS G Lock Nut, ⅜" GD Sleeve, " Long 9. GA Pivot Arm, L.H. (Shown) GA Pivot Arm, R.H. 10. GD Scraper, L.H. (Shown) GD Scraper, R.H. 11. G Hex Head Cap Screw, ⅜"-16 x ¾" 12. G Carriage Bolt, ⅜"-16 x 2" G Lock Nut, ⅜" GB Knife, L.H. (Shown) GB Knife, R.H. 14. G Hex Head Cap Screw, 5 16"-18 x ⅞" G Lock Washer, 5 16" G Washer, 5 16" USS 15. GD Stepped Spacer, 3" Long 16. GA Hub W/Bearing GA Double Row Bearing 17. G Hex Head Cap Screw, ⅝"-11 x 5 ½" GD Washer, 1 ½" O.D., 7 Gauge, Hardened G Lock Nut, ⅝" G Hex Head Cap Screw, ⅝"-11 x 5" G Washer, ⅝" USS G Machine Bushing, 1 ½", 18 Gauge (As Required) G Lock Nut, ⅝" GD Disc Blade, Notched, 16 ¾" 20. G Hex Head Cap Screw, ½"-13 x 6" G Washer, ½" SAE G Lock Nut, ½" GD U-Bolt, 1 ½" x 2 ½" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GA Drop Tube, L.H., Liquid Fertilizer (Shown) GA Drop Tube, R.H., Liquid Fertilizer 23. GA Check Valve, Low Rate 24. GA Mount W/U-Bolts GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GB Mount, L.H. (Shown) GB Mount, R.H. 26. GA Drop Tube, Liquid Fertilizer (Shown) GA Drop Tube, Liquid Fertilizer P125 Rev. 11/07

126 DEPTH/GAUGE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER (FRTZ209u) P126 Rev. 11/07

127 DEPTH/GAUGE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER (Per Assy.) 1. G Hex Head Cap Screw, ⅝"-11 x 3" 2. GD Special Washer, ⅝", Hardened 3. - See Notched Single Disc Fertilizer Opener, Pages P124 And P GA Blade Mount 5. G Machine Bushing, 1", 10 Gauge 6. GA Wheel Mount, L.H. (Shown) GA Wheel Mount, R.H. 7. GD Spacer 8. GD Half Wheel 9. GD Offset Tire 10. GA Bearing 11. GD Half Wheel Cover, Nylon 12. G Flanged Whiz Lock Screw, 5 16"-18 x ¾", No Serration G Serrated Flange Nut, 5 16" G Special Machine Bushing, ⅝" x 1" O.D. (As Required) A. GA Gauge Wheel Complete (Items 8-12) P127 Rev. 11/07

128 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES (SDS Planters) LFC021/LFC023/LFC030/LFC012(FRTZ201f/FRTZ227) 1 ¼" At Bottom Of Tank ¾" At Bottom And Top Of Tank Polypropylene Fitting Assemblies See Item 5 P128 Rev. 11/07

129 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES (SDS Planters) 1. G Elbow, 90, ¾" NPT To Barb 2. GD Band, 30" (4 Per Tank) 3. G Hose Clamp, No G Hose, ¾" x 72" (One Per Tank) 5. GA Tank W/Lid And Fittings, 30" x 150 Gallon GR Lid W/Vent, 8" (Top Of Tank) GR ¾" Polypropylene Fitting Assembly (Overflow Fitting, Nut, Bushing And O-Ring) (Top And Bottom Of Tank) GR Overflow Fitting GR ¼" Polypropylene Fitting Assembly (Nut, Bushing And O-Ring) (Bottom Of Tank) 6. GD Pad, 8" x 14' (For Two 30" Tanks) 7. GA Tank Mount (2 Per Tank) 8. GD Mounting Angle (2 Per Tank) 9. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GD U-Bolt, 5" x 7" x ¾"-10 G Lock Washer, ¾" G Hex Nut, ¾" G Adapter, 1 ¼" NPT To Barb 12. GD J-Bolt, 5 16"-18 (8 Per Tank) G Lock Nut, 5 16"-18, Grade 8 (8 Per Tank) 13. G Hose Clamp, No GA Shutoff Valve, 1 ¼" NPT GR Body O-Ring GR Stem O-Ring GR Teflon Seat GR Ball GR Handle 15. G Elbow, 90, 1 ¼" Male NPT To Female 16. G Close Nipple, 1 ¼" NPT 17. G Pipe Plug, ¾" NPT 18. G Tee, 1 ¼" Barb 19. G Hose, 1 ¼" x 32', 12 Row 30" G Hose, 1 ¼" x 40', 16 Row 30" 20. G Tee, 2" Female NPT 21. G Reducing Bushing, 2" Male NPT To 1 ¼" Female 22. GD Dust Plug, 2" Male Cam Lock 23. GD Adapter, 2" Female NPT To Cam Lock 24. GD Dust Cap, 2" Cam Lock 25. G Elbow, 45, 2" Male NPT To Female 26. GD Adapter, 2" Male NPT To Cam Lock 27. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Shutoff Valve, 2" NPT 29. G Elbow, 90, 2" NPT To Barb 30. G Hose Clamp, No. 36, Stainless Steel 31. G Hose, 2" x 18' 32. GA Quick Fill Mount, 2" 33. G Close Nipple, 2" NPT 34. GD Plate, 4" x 10 ½" (Outboard Tanks Only) 35. G Adapter, 2" NPT To Barb P129 Rev. 11/07

130 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES (Conventional Planters) (FRTZ229d/FRTZ228/FRTZ227) 125 Gallon Tank Special Tank Mounting Strap 175 Gallon Tank To Tank To Piston Pump With Even-Row Push Row Unit 1 ¼" At End Of Tank ¾" At Bottom And Top Of Tank Polypropylene Fitting Assemblies See Item 5 1. GA Tank Band, 42 ¾" (2 Per Tank) 2. G Elbow, 90, ¾" NPT To Barb 3. G Hose Clamp, No G Hose, ¾" x 72" (One Per Tank) 5. GD U-Bolt, 2 ½" x 2 ½" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½"-13 P130 Rev. 11/07

131 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES (Conventional Planters) 6. GA Tank W/Lid And Fittings, 24" x 125 Gallon (12 Row 30" - Qty. 4) (16 Row 30" - Qty. 2) GA Tank W/Lid And Fittings, 24" x 175 Gallon (16 Row 30" - Qty. 2) GR Lid/Fillwell, 8" (Top Of Tank) GR ¾" Bulkhead Fitting Assembly (Overflow Fitting, Nut, Bushing And O-Ring) (Top And Bottom Of Tank) GR ¼" Bulkhead Fitting Assembly (Nut, Bushing And O-Ring) (End Of Tank) GR Lanyard, 12 ½" (Top Of Tank) 7. GA Long Tank Mounting Strap GA Short Tank Mounting Strap GA Special Tank Mounting Strap 8. GD J-Bolt, 5 16"-18 (8 Per Tank) G Lock Nut, 5 16"-18, Grade 8 (8 Per Tank) 9. GD Tank Pad, 6" x 16' 10. G Pipe Plug, ¾" NPT 11. GD Dust Cap, 2" Cam Lock 12. GD Adapter, 2" Female NPT To Cam Lock 13. GD Dust Plug, 2" Male Cam Lock 14. GD Adapter, 2" Male NPT To Cam Lock 15. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" G Elbow, 45, 2" Male NPT To Female 17. GA Quick Fill Mount, 2" 18. G Close Nipple, 2" NPT 19. GA Shutoff Valve, 2" NPT 20. G Elbow, 90, 2" NPT To Barb 21. G Hose Clamp, No. 36, Stainless Steel 22. G Hose, 2" x 18' 23. G Close Nipple, 1 ¼" NPT 24. GA Shutoff Valve, 1 ¼" NPT GR Body O-Ring GR Stem O-Ring GR Teflon Seat GR Ball GR Handle 25. G Tee, 1 ¼" Female NPT 26. G Hose Clamp, No G Adapter, 1 ¼" NPT To Barb 28. G Hose, 1 ¼" x 32', 12 Row 30" G Hose, 1 ¼" x 40', 16 Row 30" 29. G Elbow, 90, 1 ¼" NPT To Barb 30. G Reducing Bushing, 2" Male NPT To 1 ¼" Female 31. G Tee, 2" Female NPT 32. G Hex Head Cap Screw, ⅝"-11 x 5" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Plate, 2" x 9 ⅝" 34. G Tee, 1 ¼" Barb 35. G Adapter, 2" NPT To Barb 36. GD Hose Clamp, 2" 37. G Washer, ⅜" SAE G Lock Nut, ⅜"-16 P131 Rev. 11/07

132 LIQUID FERTILIZER PISTON PUMP MOUNT/DRIVE (TWL219w/D18960) 1. G Hex Head Cap Screw, ⅝"-11 x 7 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GA Wheel Arm Mount 3. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 4. G Hex Head Cap Screw, ⅝"-11 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Spring Mount 6. GD Pin, 1 ¼" x 13 ½" G Cotter Pin, ¼" x 2" 7. GA Arm W/Grease Fittings G Grease Fitting, ⅛" NPT 8. - See Bulk Seed Hopper Catwalk, Pages P12 And P13 9. GD Spacer Plate (SDS Only) 10. G Hex Head Cap Screw, ⅝"-11 x 6 ½" GD Special Washer, ⅝", Hardened P132 Rev. 2/08

133 LIQUID FERTILIZER PISTON PUMP MOUNT/DRIVE 11. GA Spring Mount 12. GB Washer 13. GD Compression Spring 14. GA Spring Guide 15. GD Lynch Pin, ¼" 16. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" 17. G Hex Head Cap Screw, ¾"-10 x 1 ¾" G Lock Washer, ¾" G Hex Nut, ¾" GD Hose Holder 19. GR Sprocket, 18 Tooth See Liquid Fertilizer Piston Pump (Crankcase Assembly), Pages P134 And P135 GR Offset Link, No See Liquid Fertilizer Piston Pump (Cylinder Assembly), Pages P136 And P G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Washer, ⅝" USS G Lock Washer, ⅝" G Hex Nut, ⅝" GA Pump Mount 24. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GD Scraper 26. G Hex Head Cap Screw, ⅝"-11 x 3 ½" G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" GA Idler Sprocket W/Bearing, 15 Tooth 28. GD Spacer, 11 16" I.D. x 1 ¼" Long 29. GD Tire, 7.60" x 15", 8 Ply (Specify Brand*) 30. GA Spindle 31. GA Seal 32. GA Bearing 33. GR Lug Nut, ½" G Sprocket, 48 Tooth 35. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Washer, 5 16" 36. GD Shoulder Nut, 1 ¼"-12 UNF-2A 37. GA Hub W/Cups And Studs, 5 Bolt GR Cup GR Stud 38. G Chain, No. 2050, 59 Pitch Including Connector Link And Offset Link, Used W/Model L-4405 Piston Pump G Chain, No. 2050, 62 Pitch Including Connector Link And Offset Link, Used W/Model NGP-7055 Piston Pump GR Connector Link, No GR Offset Link, No GA Wheel, 5" x 15" 40. GD Valve Stem 41. G Hex Head Cap Screw, ⅝"-11 x 12" G Lock Nut, ⅝" GD Adapter Plate (Used W/Model NGP-7055 Piston Pump - If Applicable) 43. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" SAE * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Different brand tires may have different diameters. Change in tire brand may affect rates. Field checks are recommended after any change in tires. P133 Rev. 2/08

134 LIQUID FERTILIZER FLOW DIVIDER MOUNT AND HOSES (FRTZ215c/FRTZ297aa) P134 Rev. 11/07

135 LIQUID FERTILIZER FLOW DIVIDER MOUNT AND HOSES 1. G Hose, ⅜" x 160', 12 Row 30" G Hose, ⅜" x 120', 16 Row 30" 2. G Hose Clamp, No GD Adapter, ¼" NPT To ⅜" Barb 4. - See Liquid Fertilizer Piston Pump Flow Dividers, Pages P142 And P G Reducing Bushing, 1" Male NPT To ¾" Female, Stainless Steel, 16 Row 30" 6. GA Support, ¾" NPT 7. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" (Conventional) G Hex Head Cap Screw, ⅜"-16 x 2 ¾" (SDS) G Lock Washer, ⅜" G Hex Nut, ⅜" G Coupler, ¾" Female NPT 9. G Elbow, 90, ¾" Female NPT 10. G Adapter, ¾" NPT To Barb 11. G Hose, ¾" x 200" 12. G Hose Clamp, No G Hose Clamp, No See Liquid Fertilizer Piston Pump (Cylinder Assembly), Pages P138 And P See Liquid Fertilizer Piston Pump (Crankcase Assembly), Pages P136 And P Hose, 1 ¼", See Liquid Fertilizer Tanks, Saddles, Saddle Mounts And Hoses, Pages P128-P G Reducing Bushing, 1 ½" Male NPT To 1 ¼" Female 18. G Elbow, 90, 1 ¼" NPT To Barb 19. G Pipe Nipple, ¾" NPT x 1 ½" Long 20. G Elbow, 90, ¾" Male NPT To Female 21. GA Strainer Complete GR Screen, No. 40 Mesh GR Gasket GR Y-Body GR End Cap 22. G Adapter, 1 ¼" NPT To Barb 23. G Elbow, 90, 1 ¼" Male NPT To Female 24. G Reducing Bushing, 1 ½" Male NPT To 1 ¼" Female 25. See "Liquid Fertilizer Piston Pump W/18 Tooth Sprocket", P140 and P G Elbow, 90, ¾" NPT To Barb 27. G Reducing Bushing, 1 ½" Male NPT To ¾" Female 28. G Close Nipple, 1 ¼" NPT P135 Rev. 11/07

136 LIQUID FERTILIZER PISTON PUMP (Crankcase Assembly) (PT38a/GR1100) John Blue Model L-4405 P136 Rev. 11/07

137 LIQUID FERTILIZER PISTON PUMP (Crankcase Assembly) 1. - See Liquid Fertilizer Piston Pump Mount/Drive, Pages P132 And P G Square Head Set Screw, ⅜"-16 x ⅝" 3. GR Spacer 4. G Hex Head Cap Screw, 5 16"-18 x 1" 5. GR Housing 6. GR Repair Kit, Includes Item 5 On Liquid Fertilizer Piston Pump (Cylinder Assembly), Pages P138 And P GR Bearing 8. GR Name Plate 9. G Hex Head Cap Screw, 5 16"-18 x ½" 10. GR Crankcase 11. GR Vent Plug See Liquid Fertilizer Piston Pump (Cylinder Assembly), Pages P138 And P GR Adjustment Wrench 14. GR Plug 15. GR Disc 16. GR Connecting Rod 17. GR Large Eccentric 18. GR Small Eccentric 19. GR Eccentric Pin 20. GR Sleeve 21. GR Setting Arm Key 22. GR Woodruff Key 23. GR Crankshaft 24. GR Bearing 25. GR Cover Plate 26. GR Square Head Cap Screw, ⅜"-16 x 1 ¾" 27. GR Scale 28. G Lock Nut, ⅜" GR Flange 30. G Hex Head Cap Screw, ⅝"-11 x 4 ½" G Hex Nut, ⅝" GR Arm 32. G Hex Socket Head Set Screw, 5 16"-18 x ⅜" 33. G Hex Head Cap Screw, ⅜"-16 x 1 ½" GR Mounting Pad G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. GA Piston Pump Complete Less Sprocket (Model L-4405), Includes Crankcase (Items 2-33 On This Page) And Cylinder (Items 1-22 On Pages P138 And P139) Assemblies P137 Rev. 11/07

138 LIQUID FERTILIZER PISTON PUMP (Cylinder Assembly) (PT39a) John Blue Model L-4405 P138 Rev. 11/07

139 LIQUID FERTILIZER PISTON PUMP (Cylinder Assembly) 1. - See Liquid Fertilizer Piston Pump (Crankcase Assembly), Pages P136 And P G Hex Head Cap Screw, ⅜"-16 x 8" G Hex Nut, ⅜" GR Discharge Manifold 4. GR Discharge Valve 5. GR Repair Kit, Includes Item 6 On Liquid Fertilizer Piston - Pump (Crankcase Assembly), Pages P136 And P G Hex Head Cap Screw, ⅜"-16 x 5 ½" G Hex Nut, ⅜" GR Outboard Cylinder 8. GR Suction Valve 9. GR Suction Manifold 10. GR Flange Packing Washer 11. GR Plunger 12. GR Inboard Cylinder 13. GR Stuffing Box Insert 14. GR Retaining Ring 15. GR Washer 16. GR Packing Spring 17. GR Outboard Stuffing Box 18. GR Crosshead Guide 19. GR Piston Rod 20. GR Pin 21. G Hex Head Cap Screw, 5 16"-18 x 1" P139 Rev. 11/07

140 LIQUID FERTILIZER PISTON PUMP Uses 18 Tooth Sprocket (A12335a/GR1808) Model NGP-7055 P140 Rev. 11/07

141 LIQUID FERTILIZER PISTON PUMP Uses 18 Tooth Sprocket 1. GR Flange Cover Assembly G Hex Head Cap Screw, 5 16"-18 x ⅞" 2. GR Connecting Rod Assembly 3. GR Spacer Assembly G Hex Socket Head Set Screw, 5 16"-18 x ⅜" 4. GR Plug 5. GR Vent Plug 6. GR Woodruff Key 7. GR Eccentric Pin 8. GR Pin 9. GR Bearing 10. GR Setting Hub Assembly 11. GR Stuffing Box Insert 12. GR Sprocket, 18 Tooth 13. GR Adjustment Wrench 14. GR Setting Pointer Assembly 15. GR Repair Kit, Includes: (6) Gaskets, (9) O-Rings, (4) Washers, (1) Retaining Ring, (2) Oil Seals, (1) Snap Ring, (1) Thrust Washer, (1) Rod Bushing, (2) Flange Plunger Packings, (2) Packing Springs, (2) Rod Vee Packing Sets 16. GR Discharge Valve Assembly 17. GR Suction Valve Assembly 18. GR Setting Arm Key 19. GR Bearing 20. G Carriage Bolt, ⅜"-16 x 2" G Lock Nut, ⅜" G Hex Head Head Cap Screw, ⅜"-16 x 1 ½" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. GA Piston Pump Complete W/18 Tooth Sprocket (Model NGP-7055) P141 Rev. 11/07

142 LIQUID FERTILIZER PISTON PUMP FLOW DIVIDERS (FRTZ202a/FRTZ202c/FRTX202d) 12 Row 30" Model FD-1200 Flow Divider, 12 Outlet 16 Row 30" Model FD-2000 Flow Divider, 20 Outlet ¾" NPT 1" NPT P142 Rev. 11/07

143 LIQUID FERTILIZER PISTON PUMP FLOW DIVIDERS 1. GR Vent Plug 2. GR Hex Socket Head Screw, ¼"-20 x ¾" GR Lock Washer, ¼", Stainless Steel 3. GR Cap 4. GR Needle Assembly W/Seal Kit (Item 11) 5. GR Seal Kit, Includes: (3) O-Rings, (1) Seal, (1) Spring, (1) Stainless Steel Sleeve 6. GR Sleeve 7. GR Body, (12 Outlet) 8. GR Cap 9. GR Needle Assembly W/Seal Kit (Item 11) 10. GR Seal Kit, Includes: (3) O-Rings, (1) Seal, (1) Spring 11. GR Sleeve 12. GR Sleeve, 1" O.D. x ½" Long, Stainless Steel 13. GR Body, 20 Outlets 14. G Hex Socket Head Plug, ¼" NPT, Stainless Steel A. GA Liquid Fertilizer Piston Pump Flow Divider Complete, 12 Outlet (Model FD-1200) B. GA Liquid Fertilizer Piston Pump Flow Divider Complete, 20 Outlet (Model FD-2000) P143 Rev. 11/07

144 REAR TRAILER HITCH (A9895b) P144 Rev. 11/07

145 REAR TRAILER HITCH 1. G Hex Head Cap Screw, ⅝"-11 x 11" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Clamp, 2" x 11 ¾" 3. GA Hitch 4. GD Pin, 1 ¼" x 6 ¼" G Cotter Pin, ¼" x 2" 5. GA Clevis W/Grease Fitting G Grease Fitting, ¼"-28 P145 Rev. 11/07

146 DECALS, PAINT AND MISCELLANEOUS DO NOT REMOVE THIS ASSEMBLY AFTER PLANTER IS ASSEMBLED FOR USE. REMOVAL OF THIS WHEEL AND AXLE ASSEMBLY CAN CAUSE THE MACHINE TO BECOME UNSTABLE AND TIP OVER CAUSING DAMAGE OR SERIOUS INJURY NOTE It is the responsibility of the user to read and understand the Operator s Manual in regards to safety, operation, lubrication and maintenance before operation of this equipment. AN OPERATOR & PARTS MANUAL IS AVAILABLE FOR THIS MACHINE. To obtain a manual, furnish model number and serial number and contact your KINZE Dealer or KINZE Manufacturing, Inc., P.O. Box 806 Williamsburg, IA USA P146 Rev. 11/07

147 DECALS, PAINT AND MISCELLANEOUS 9 A A WARNING MOVING PARTS INSIDE G Decal, Warning 2. G Decal, Grease Weekly 3. G Decal, Oil Daily 4. G Decal, Grease Daily 5. G Decal, Grease Annually 6. G Decal, Warning (1 Per Granular Chemical Hopper) 7. G Decal, Danger 8. G Decal, Warning 9. G Decal, Information (1 Per Brush-Type Seed Meter) 10. G Decal, Twin-Line, ¾" x 3" 11. G Decal, Warning 12. G Decal, Point Row Clutch Rotation 13. G Decal, Information 14. G Decal, Interplant 15. G Decal, Two-Speed Point Row Clutch Rate Reduction 16. G Decal, Danger 17. G Decal, Note P147 Rev. 11/07