Limit switches 0 ZCK E67 ZCK E23 ZCK E62. with contact, cable. entry for Pg 13, fi xed, 1 step (2) (3) ZCK JD3p, ZCK J1, J5, J6, J7, J9
|
|
- Jane Kelly
- 5 years ago
- Views:
Transcription
1 Presentation Variable composition: standard bodies Thermoplastic roller lever plunger, 1 direction of actuation Steel roller lever plunger, 1 direction of actuation ZCK E1 ZCK E3 Side metal plunger Side steel roller plunger, horizontal Side steel roller plunger, vertical ZCK E63 ZCK E64 ZCK E6 Spring rod Cat s whisker ZCK E8 ZCK E6 End reinforced steel roller plunger End steel roller plunger with protective boot End steel roller plunger ZCK E67 ZCK E69 ZCK E6 End metal plunger End steel ball bearing plunger End metal plunger with protective boot ZCK E61 ZCK E66 ZCK E619 Body with -pole contact, fi xed, 1 step, M1 connector () ZCK J1D, JD, J6D, J7D ZCK J8D Body with contact, cable entry for Pg, fi xed, 1 step () (3) ZCK JD3p, ZCK J1, J, J6, J7, J9 Body with contact, cable entry for Pg, fi xed, 1 step () (3) ZCK J, J8 Body with contact, cable entry for Pg, fi xed, step () (3) ZCK J4 Cannot be used with bodies ZCK J4 and ZCK J41. () For further details, see page 34/4. (3) For a cable entry tapped ISO M x 1., add H9 to the reference. Example: ZCK J1 becomes ZCK J1H9. For a cable entry tapped 1/ NPT, add H7 to the reference. Example: ZCK J1 becomes ZCK J1H7. Body with contact, cable entry for Pg, plug-in, 1 or step () (3) ZCK J11, J1, J41 34-EN_Ver1..indd
2 Presentation (continued) Variable composition: standard bodies Square U rod lever, steel, 3 L 1 () Round rod lever, steel, Ø 3 L 1 () Round rod lever, glass fi bre, Ø 3 L 1 () Round rod lever, thermoplastic, Ø 6 L () ZCK Y1 ZCK Y3 ZCK Y ZCK Y9 Spring lever with thermoplastic end (4) ZCK Y81 Spring-rod lever, metal (4) ZCK Y91 Spring return, for actuation from left AND right or from left OR right Variable length thermoplastic roller lever (4) ZCK Y41 Variable length steel roller lever (4) ZCK Y43 ZCK E Thermoplastic roller lever () Steel roller lever () Steel ball bearing mounted roller lever () ZCK Y11 ZCK Y ZCK Y Body with double-pole C/O staggered, contact cable entry for Pg, fi xed, step (3) ZCK J44 Body with double-pole C/O staggered, contact cable entry for Pg, plug-in, step (3) ZCK J414 Stay put, for actuation from left AND right ZCK E9 Forked arm with thermoplastic rollers, 1 track () ZCK Y71 Forked arm with thermoplastic rollers, track () ZCK Y61 : head assuring positive opening operation. (4) Adjustable throughout 36 in steps, or in 9 steps by reversing the notched washer. () Adjustable throughout 36 in steps, or in 4 steps by reversing the lever mounting. 34-EN_Ver1..indd 3
3 References Adaptable sub-assemblies: standard bodies Fixed bodies with -pole contact 1 step (XES P11) 1 Positive operation Cable entry Reference Weight Pg ZCK J1.31 ISO M x 1. ZCK J1H9.31 1/ NPT ZCK J1H7.31 ZCK J p C/O (XES P1) (XEN P11) make before make, (XEN P161) N/C + N/C (XEN P1) N/O + N/O (XEN P1) N/C + N/C (XES P1) Pg ZCK J.31 ISO M x 1. ZCK JH9.31 1/ NPT ZCK JH7.31 Pg ZCK J.31 ISO M x 1. ZCK JH9.31 1/ NPT ZCK JH7.31 Pg ZCK J6.31 ISO M x 1. ZCK J6H9.31 1/ NPT ZCK J6H7.31 Pg ZCK J7.31 ISO M x 1. ZCK J7H9.31 1/ NPT ZCK J7H7.31 Pg ZCK J8.31 ISO M x 1. ZCK J8H9.31 1/ NPT ZCK J8H7.31 Pg ZCK J9.31 ISO M x 1. ZCK J9H9.31 1/ NPT ZCK J9H7.31 step C/O staggered, (XES P31) Pg ZCK J4.31 ISO M x 1. ZCK J4H9.31 1/ NPT ZCK J4H7.31 Fixed bodies with 3-pole contact + N/O (XE3S P11) Positive operation Cable entry Reference Weight Pg ZCK JD31.31 ISO M x 1. ZCK JD31H9.31 1/ NPT ZCK JD31H7.31 N/C + (XE3S P1) Pg ZCK JD39.31 ISO M x 1. ZCK JD39H9.31 1/ NPT ZCK JD39H7.31 N/C + (XE3N P1) + N/O (XE3N P11) Pg ZCK JD37.31 ISO M x 1. ZCK JD37H9.31 1/ NPT ZCK JD37H7.31 Pg ZCK JD3.31 ISO M x 1. ZCK JD3H9.31 1/ NPT ZCK JD3H7.31 : N/C contact with positive opening operation EN_Ver1..indd
4 References (continued) Adaptable sub-assemblies: standard bodies Plug-in bodies with contact 1 step Single-pole C/O 1 11 Positive operation Cable entry Reference Weight Pg ZCK J11.3 ISO M x 1. ZCK J11H9.3 1/ NPT ZCK J11H7.3 Double-pole C/O Pg ZCK J1.3 ISO M x 1. ZCK J1H9.3 1/ NPT ZCK J1H7.3 p ZCK J 1 step Double-pole C/O staggered, Pg ZCK J41.3 ISO M x 1. ZCK J41H9.3 1/ NPT ZCK J41H7.3 Bodies with contact, with rotary head (without operating lever) Fixed body step 1 from the left AND 1 from the right Double-pole C/O staggered, Positive Cable entry Reference Weight operation Pg ZCK J44.4 ISO M x 1. ZCK J44H9.4 1/ NPT ZCK J44H7.4 ZCK J44 Plug-in body step 1 from the left AND 1 from the right Double-pole C/O staggered, Pg ZCK J ISO M x 1. ZCK J414H9.46 1/ NPT ZCK J414H7.46 Plug-in housing only Description For use with Contacts Reference Weight Single-pole 1 C/O ZCK J11 Silver ZCK J1.1 with positive opening operation Double-pole C/O simultaneous ZCK J1 Silver ZCK J.16 with positive opening operation Double-pole 1 C/O + 1 C/O staggered ZCK J41 Silver ZCK J4.16 : N/C contact with positive opening operation. p ZCK J 34-EN_Ver1..indd
5 References Osiswitch Classic Adaptable sub-assemblies: bodies with indicator light module Fixed bodies with -pole contact With module comprising 1 LED, c 4 V 1 step (XES P11) 1 Positive Cable entry Reference Weight operation Pg ZCK J1.3 ZCK J ppp (XEN P11) With module comprising LEDs, c 4 V 1 step (XES P11) (XEN P11) With module comprising neon indicator lights, a 11/1 V 1 step (XES P11) (XEN P11) With module comprising neon indicator lights, a /4 V 1 step (XES P11) Pg ZCK J.3 Pg ZCK J11.3 ISO M x 1. ZCK J11H9.3 Pg ZCK J1.3 ISO M x 1. ZCK J1H9.3 Pg ZCK J3.3 ISO M x 1. ZCK J3H9.3 Pg ZCK J33.3 ISO M x 1. ZCK J33H9.3 Pg ZCK J4.3 ISO M x 1. ZCK J4H9.3 (XEN P11) 1 Pg ZCK J34.3 ISO M x 1. ZCK J34H9.3 Plug-in bodies with single-pole contact With module comprising LEDs, c 4 V 1 step C/O 1 11 Positive Cable entry Reference Weight operation Pg ZCK J ISO M x 1. ZCK J111H9.34 ZCK J1 ppp With module comprising neon indicator lights, a 11/1 V 1 step C/O With module comprising neon indicator lights, a /4 V 1 step C/O Pg ZCK J13.34 ISO M x 1. ZCK J13H9.34 Pg ZCK J.34 ISO M x 1. ZCK JH9.34 : N/C contact with positive opening operation. Indicator light module characteristics of indicator 1 LED or LEDs neon lights Rated insulation voltage c V, conforming to IEC a V, conforming to IEC Current consumption 7 ma per LED. ma per neon ma per neon Rated operational voltage c 4 V a 11/1 V a /4 V Voltage limits c 3 V (including ripple) a 9 V a 19 6 V Service life 1 hours hours hours Reverse polarity protection Yes 6 34-EN_Ver1..indd
6 References Adaptable sub-assemblies: bodies with M1 connector Fixed bodies with -pole contact 1 step (XES P11) 1 Positive operation Reference Weight ZCK J1D.3 (XEN P11) 1 ZCK JD.3 ZCK J p D N/O + N/C make before make, (XEN P161) 1 ZCK J6D.3 N/C + N/C (XEN P1) ZCK J7D.3 N/O + N/O (XEN P1) 4 3 ZCK J8D.3 N/C contact with positive opening operation. 34-EN_Ver1..indd 7
7 References Adaptable sub-assemblies: contact s Contact s of contact For bodies Positive operation -pole contact 1 ZCK J1 ZCK J1D Reference Weight XES P11. XES P1 p 1 1 ZCK J ZCK JD XEN P11. C/O ZCK J XES P1.4 C/O staggered, ZCK J4 XES P31.4 XEN P1 p 1 N/O + N/C make before break, 1 ZCK J6 ZCK J6D XEN P161. N/C + N/C ZCK J7 ZCK J7D XEN P1. N/O + N/O 4 3 ZCK J8 ZCK J8D XEN P1. N/C + N/C ZCK J9 XES P1. XES P p 1 3-pole contact + N/O ZCK JD31 XE3S P11.3 N/C ZCK JD39 XE3S P1.3 N/C ZCK JD37 XE3N P1.3 XE3 p P1 p 1 + N/O ZCK JD3 XE3N P11.3 : N/C contact with positive opening operation EN_Ver1..indd
8 References Adaptable sub-assemblies: add-ons Covers + indicator light module For use with Number and type of indicators Voltage Reference Weight Fixed body 1 LED c 4 V ZCK Z.6 LEDs c 4 V ZCK Z1.6 ZCK Z pp neon lights a 11/1 V ZCK Z33.6 a /4 V ZCK Z34.6 Plug-in body LEDs c 4 V ZCK J11. neon lights a 11/1 V ZCK J3. a /4 V ZCK J4. ZCK J1 pp Indicator light modules For use with Number and type of indicators Voltage Reference Weight Fixed body 1 LED c 4 V ZCK J9.3 LEDs c 4 V ZCK J96.3 neon lights a 11/1 V ZCK J93.3 ZCK J9 p a /4 V ZCK J94.3 Module with resistor for machine diagnostics For use with Resistor value Reference Weight Fixed body (ZCK J1 only) 1 kω, 1/4 Ω ZCK J8A.3 ZCK J8A Other versions Covers + indicator light module for other supply voltages. Please consult your Regional Sales Offi ce. 34-EN_Ver1..indd 9
9 Operation Adaptable sub-assemblies Function diagrams (positive operation assured only if the associated sub-assemblies are ) Heads ZCK E61, E619, E66 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6p ZCK J7p ZCK J8p ZCK J ,7(P) 11-1/1- -/ /1- -/3-4 3,4(P) , 3, 4,6(P) ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD3 4,7(P) 3,4(P) 4,7(P) 3,4(P) , 3, Head ZCK E63 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6 ZCK J7 ZCK J8 ZCK J9 1, 4(P) , 1, 11-1/1- -/ /1- -/3-4, ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD3 1, 4(P) 1,,9(P) 1, 4(P) 1,,9(P) ,7, - -,7,,, Heads ZCK E64, E6 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6 ZCK J7 ZCK J8 ZCK J9,6(A) 6,4(P) ,,6(A) 11-1/1- -/ /1- -4/3-4 1, ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD3,6(A) 6,4(P),6(A) 4,7(P),6(A) 6,4(P),6(A) 4,7(P) ,6-4,6 1, 1, Heads ZCK E67, E69 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6 ZCK J7 ZCK J8 ZCK J9 3,(A) 8,1(P) , 3,(A) 11-1/1- -/ /1- -/3-4 1, ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD3 3, 8,1(P) 3,,9(P) 3,(A) 8,1(P) 3,(A),9(P) ,3,3-1, 1, Heads ZCK E1, E3 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6 ZCK J7 ZCK J8 ZCK J9 (A) 11,(P) , (A) 11-1/1- -/ /1- -/3-4, ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD3 (A) 11,(P) (A) 8,(P) , 1- - Heads ZCK E6, E8 with body ZCK J1p ZCK Jp ZCK Jp ZCK J6 ZCK J7 ZCK J8 ZCK J9 1,,9(P),7 4,1(P) ,7, 1,,,6(A) 4,7(P) 3,7,8(P) ,6 -,6(A) 3,(A),9(P) 1- -,3 (A) 8,(P) ,3(A) 8(P) ,(A) 8,(A) 11,(P) 1- - (A) (A) 11,(P) (A) 8,(P) , ,4(P),9(P) ,, 4,7(P) 1- -,6(A) ,9(P) 3,(A) ,7(P) 1, 4(P) ,, 1-, 1- -,6(A) ,(A),6(A) 6,4(P) , 3, (A) 8,1(P) , 8,(P) (A) 11,(P) (A) (A) , /1- -/ /1- -/ ZCK JD39 ZCK JD37 ZCK JD31 ZCK JD ZCK J4p Unactuated 1 st step nd step , Contact operation G contact closed H contact open (A) cam displacement (P) positive opening point 1 34-EN_Ver1..indd
10 Operation, schemes Adaptable sub-assemblies Function diagrams (positive operation assured only if the associated sub-assemblies are ) Head ZCK E with body ZCK J1 p ZCK J p ZCK J p ZCK J6 ZCK J7 ZCK J8 ZCK J /1-1- -/ /1- -/ ZCK JD39 ZCK JD37 ZCK JD39 ZCK JD ZCK J4 p Unactuated 1 st step, actuated from left or right nd step, actuated from left or right Head ZCK E9 with body ZCK J1 p ZCK J p ZCK JD31 ZCK JD /1- -/ /1- -/ ZCK J44, J414 (body with head) Unactuated Actuated from left Actuated from right G H contact closed (P) positive opening point contact open Wiring schemes Indicator light modules 1 LED, c 4 V LEDs, c 4 V neon lights, a 11/1 or /4 V Contact operation + + Module with resistor 1 X3 X kω 1/4 W X3 X () X3 X () X1 X1 Orange indicator () Green indicator ZCK J p D N/C 3-4 N/O t 4 A / 4 V max EN_Ver1..indd 11
11 Dimensions Adaptable sub-assemblies Bodies ZCK J1, J, J, J4, J p p, J p 3 p, J6, J7, J8, J9 ZCK J1H9, JH9, JH9, J4H9, J p p H9, J p 3 p H9, J6H9, J7H9, J8H9, J9H9 ZCK J1H7, JH7, JH7, J4H7, J p p H7, J p 3 p H7, J6H7, J7H7, J8H7, J9H7 ZCK J11, J1, J41, J11 pp ZCK J11H9, J1H9, J41H9, J11 pp H9 ZCK J11H7, J1H7, J41H7, J11 pp H7 ZCK J1D, JD, J6D, J7D, J8D 76, 6, 6 83, 6 6, 76, 6, 6 33, , 33, Bodies with rotary head mounted ZCK J44, ZCK J44H9, ZCK J44H7 ZCK J414, ZCK J414H9, ZCK J414H7 M M , , Plunger heads ZCK E61 ZCK E619 ZCK E63, , 1 ZCK E64 ZCK E6 ZCK E66 63,6 1 63, ZCK E6, ZCK E67 ZCK E69 ZCK E1, E tapped entry for ISO M x 1. or Pg cable gland or tapped 1/ NPT. Ø: elongated holes Ø.3 x EN_Ver1..indd
12 Dimensions (continued) Adaptable sub-assemblies Rotary head ZCK E with operating lever ZCK Y11, Y, Y ZCK Y41, Y43 ZCK Y1, Y, Y3, Y J1 J 41 63, K K1 J J1 K K1 Ø max. ZCK Y81 ZCK Y91 ZCK Y U 3 ZCK Y Ø ZCK Y Ø 3 ZCK Y Ø Rotary head ZCK E9 with operating lever ZCK Y61 ZCK Y Multi-directional heads ZCK E6 ZCK E8 1 1 Note: operating lever spindle threaded M6. 34-EN_Ver1..indd
Limit switches Osiswitch Classic Metal, conforming to CENELEC EN 50041, type XCK J Fixed or plug-in body Variable composition: standard bodies
Presentation Metal, conforming to CENELEC EN 41, type XCK J Variable composition: standard bodies ZCKE1 ZCKE ZCKE63 ZCKE64 ZCKE6 ZCKE8 ZCKE6 ZCKE67 ZCKE69 ZCKE61 ZCKE66 ZCKE619 ZCKJ1D, JD, J6D, J7D ZCKJ8D
More informationO bloco de contato XESP2031 é utilizado no corpo ZCKJ4* / ZCKJ404 é tem o seu acionamento escalonado, ou seja:
O bloco de contato XESP1 é utilizado no corpo ZCKJ é tem o acionamento instantâneo de todos os seus contato (NA+NF) ao mesmo tempo independente do lado de atuação do cabeçote. O bloco de contato XESP31
More informationZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29
ZCK-Y39 ZCK-Y43 ZCK-Y49 ZCK-Y41 ZCK-D239 ZCK-D23 ZCK-D59 ZCK-Y55 ZCK-Y54 ZCK-Y59 ZCK-D219 ZCK-D21 ZCK-D81 ZCK-D91 ZCK-Y91 ZCK-Y31 ZCK-Y33 ZCK-Y34 ZCK-Y81 ZCK-D029 ZCK-D02 ZCK-D05 ZCK-D109 ZCK-D41 ZCK-D06
More informationLimit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
More informationLimit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
More informationDouble insulated, types XCK-P and XCK-T. With head for linear movement (plunger) operators
Double insulated, types XCK-P and XCK-T Presentation XCK-P with 1 cable entry, conforming to CENELEC EN 57 With head for linear movement (plunger) operators Page 18 With head for rotary movement (lever)
More informationLimit switches Osiswitch Classic For hoisting and materials handling applications, type XCR Complete switches with 1 cable entry
References, characteristics For hoisting and materials handling applications, type XCR Complete switches with cable entry Type of head Rotary with spring return to off position Stay put Maximum displacement
More informationPresentation. Limit switches. b XC2J. v With head for linear movement (plunger) with 1 cable entry. v With head for rotary movement (lever)
Presentation b XCJ with cable entry v With head for linear movement (plunger) v With head for rotary movement (lever) General characteristics Environment characteristics Conformity to standards Standard
More informationLimit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
More informationLimit switches. Steel roller plunger. Metal end plunger with elastomer boot 4.6(P) mm
characteristics Complete switches with cable entry Type of head Plunger (fixing by the body) Form B () Form C () Form E () with elastomer boot Steel roller References of complete switches with ISO M x
More informationLimit switches. Presentation. OsiSense XC Special For hoisting and material handling applications, type XCR. b XCR
Presentation type XCR b XCR v With head for rotary movement operators, spring return to off position contact actuation position per direction Page / v With head for rotary movement operators, stay put
More informationLimit switches. Presentation. OsiSense XC Special For hoisting and material handling applications XCR. b XCR
Presentation For hoisting and material handling applications XCR b XCR v With head for rotary movement operators, spring return to off position 1 contact actuation position per direction Page 326/6 v With
More informationOsiSense. XC Basic Limit Switches XCMN, XCKN, XCNT
OsiSense XC Basic Limit Switches XCMN, XCKN, XCNT Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com - www.stevenengineering.com Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com
More informationED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
More informationMiniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
More informationED SERIES SAFETY LIMIT SWITCH Description
Description The ED series safety limit switches conform to EN 50047 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
More informationComponents for safety applications
pages / and /35 page /36 Double insulated, turret head, types CS-PA, CS-TA and CS-TE Cable entries tapped M16 x 1.5 Without locking of actuator 1 -pole N/C + N/O CS-PA59 -pole N/O + N/C CS-PA69 -pole N/C
More informationSelection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B 3 H G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
More informationPendant control stations 6
Characteristics For control circuits Environment Conformity to standards EN/IEC 0-- EN/IEC 00-, UL 0, CSA C- n EN/IEC 0-- and EN/ISO 0: 00 for versions with trigger action Emergency stop Protective treatment
More informationComepi Limit Switches
Comepi Limit Switches Features and specifications Approvals CSA, culus IP rating (IEC 60529 and EN 60529 OR IEC 536) IP65-67 Operating temperature -25 to 70ºC (low temperature version available -40 to
More informationGross Automation (877)
Limit Switches Carlo Gavazzi broadens its leading range of products for the industrial automation world, with the new and complete range of mechanical limit and safety switches. These robust switches provide
More informationL S T E 4 1 L S A 4 0 X 5 4
Bodies with contact block for rectilinear or angular motion heads L S 4 5 M 0 0 B 1 1 Limit Switch... LS Casing width: 40 mm... 4 Cable inlet: 1 cable inlet for Pg 13.5 cable gland... 0 1 cable inlet M20
More informationPneumatic. PXC Limit Switches
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationLimit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
More informationLimit Switches - Limit Type (PS31L) Plastic Body IP65
Limit Switches - Limit Type (PSL) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
More informationSelection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
More informationSelection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E0 I E20 I E40 I Contact blocks (standard) M20 ½ NPT 00 NO+NC snap action 0 NO+NC slow action 02 NO+NC slow action with
More informationAutomation - Lift - Handling System - Atex
Automation Lift Handling System Atex GIOVENZANA INTERNATIONAL B.V.: AUTOMATION TECHNOLOGIES AUTOMATION The solutions offered by Giovenzana are the results of the market analysis of industrial electrical
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated, type XAC-A
Characteristics Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600, CSA A600-Q600 Standard version : TH Ambient air
More informationPre wired limit switches
Pre wired limit switches Selection diagram Actuators A B B 9 BL Thermoplastic Bodies E7 I s NO+NC snap action NO+NC slow action Cable entry 4 or 5 pole PVC sheath cable (standard) M connector AMP connector
More informationLimit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
More informationXCS Safety Interlock Selection
Steven Engineering-2 Ryan Way-South San Francisco, CA 980-6370-Main Office:(650)588-9200-Outside Local Area:(800)258-9200-www.stevenengineering.com Selection Plastic, Double, Turret Head c, Type, locking
More informationComponents for safety applications
Presentation CS-P with 1 cable entry With rotary operating head, with elbowed lever (flush with rear of switch) straight lever, f hinged covers and guards Pages /4, /4, /44 CS-PR with 1 cable entry With
More informationPosition switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
More informationPendant control stations
: pages 30075/3 to 30075/6 Characteristics Environment Conforming to standards IEC 947-5-1, EN 60 947-5-1, IEC 337-1, VDE 0660-200 Approvals Protective treatment NEMKO. Special version : UL Listed A600-Q600,
More informationSafety detection solutions
General, Preventa XY C Presentation are designed to: b avert hazards (dangerous phenomena) at the earliest possible moment, or to reduce risks which could cause injury to persons or damage either to machines
More informationXCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
More informationLimit Switches - Limit Type (PS42L) Plastic Body IP65
Limit Switches - Limit Type (PS42L) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
More informationLimit switches. Flameproof - Group IIC XCWD series. from the latest developments: modularity, compactness, a very broad range of actuators.
Sensors Limit switches Flameproof - Group IIC XCWD series from the latest developments: modularity, compactness, a very broad range of actuators. They are designed for intensive use and a very good repeatability.
More informationPosition switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
More informationControl Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
More informationLimit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
More informationLimit Switches Metal casing, 40mm & 60mm Assembled Components
Limit Switches Metal casing, & mm Assembled Components Metal Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 2 dimensions: LS4M, width.
More informationLK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
More informationXCKP2145P16 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16
Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 47.90 USD Main Range
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationEasy Mounting and Wiring
Limit es 80T Introduction Plug-in Style 80T-AP with escription NonPlug-in Style 80T-Awith Bulletin 80T limit switches are ideal for applications in which heavy duty pilot ratings, small size, a high degree
More informationElectrical position indicators and combi switchboxes for linear and quarter turn valves
Electrical position indicators and combi switchboxes for linear and quarter turn valves Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Instrumentation and accessories Position
More informationLS Series Limit Switches. Short Form Catalogue AC1300 ABB
Short Form Catalogue LS Series Limit Switches AC ABB LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic
More informationIEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
More informationIEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
More informationSwitches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
More informationSelection diagram. Actuators. Bodies. Contact blocks. Cable entry AB BB CB. Thermoplastic
Safety switches Selection diagram Actuators AB BB CB TB S5 SC Thermoplastic Bodies E0 I E20 I E0 I Contact blocks 0 NO+NC slow action 0 2NC slow action 08 2NC slow action (for pull-wire switches) Pg 3,5
More informationHeavy Duty, Industrial General Specifications XCKJ. Electrical Ratings Non-plug-in: A300 (AC), Q300 (DC)
Heavy Duty, Industrial General Specifications Rated Power Conforms to IEC 947-5-1, duty categories AC15 and DC13. emperature range -13 F to 158 F (-25 C to 7 ); optional -4 F (-4 C); +248 F (12 C). he
More informationSERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE
SERIES Z/T23 Safety-Rated, Positive-Break Miniature DIN Limit Switches Features & Benefits Positive-Break NC contacts won t stick or weld shut. Watertight design meets IP washdown requirements. Rugged,
More informationRotary Cam Swichtes. 1. Rotary Cam Switches General. Function 1.0 2
1. Rotary Cam Switches Rotary Cam Swichtes 1.0. General LEONARD rotary cam switches (formerly VOLLENBROICH) have been built as reliable and economical subassemblies for the industry automation since decades.
More informationSPECIAL DUST EXPLOSIVES ATMOSPHERES
SPECIAL DUST EXPLOSIVES ATMOSPHERES Explosive atmospheres Main sectors of activity subject to a higher risk of explosion or fire Flour mills Wood and aluminium workshops A reference for installations in
More informationSafety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
More informationTechnical data. Standards: IEC/EN BG-GS-ET-15
1 Technical data Contact variants 7 30 2 2 Long life Multiple coding Thermoplastic enclosure Double insulated X 3 cable entries M20 Large wiring compartment High level of contact reliability with low voltages
More informationLimit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
More informationPart Numbers. 9007A and 9007C Basic snap switch without enclosures with or without operators 21-6
Table of Contents Section Limit Switches Encapsulated Miniature Industrial Snap Switches 9007MS, -8 9007A, p. - Modular, Miniature and Compact Part Numbers 9007A and 9007C Basic snap switch without enclosures
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
More informationD4D-N. Safety Limit Switch. Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking. H Contacts opened by positive opening
Safety Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking H Contacts opened by positive opening mechanism (NC contacts only) H Double insulation makes ground terminal
More informationSingle foot switches PX and PA series
Single foot switches PX and PA series Technical data Housing Made of polymer glass-reinforced shock-proof thermoplastic resin with double insulation Bedplate with non-skid rubber feet. Actuation force:
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationVersa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissi
SERIES B VALVES AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 Two-Way Types for bleeding pilots of larger valves, for bleeding cylinders or small pressure systems, operating air tools or motors, opening
More informationPosition Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationPosition Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
More informationElectrical position indicators and combi switchboxes for linear and quarter turn valves
Electrical position indicators and combi switchboxes for linear and quarter turn valves VALVES, MEASUREMENT AND CONTROL SYSTEMS Instrumentation and accessories Position indicators and combi switchboxes
More informationBSW , -493, -494 Mechanical Rotary Cam Switches. User's Guide. Mechanical Rotary Cam Switches BSW BSW BSW
BSW 819-492, -493, -494 User's Guide Mechanical Rotary Cam Switches BSW 819-492 BSW 819-493 BSW 819-494 The CE Marking is your guarantee that our products meet the requirements of EC Directive 89/336/EC
More informationLimit switches. Metal. Limit Switches Metal casing, 30mm, 40mm & 60mm
Limit Switches casing, 3mm, 4mm & 6mm Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 3 dimensions: LS3M, 3mm width. LS4M, 4mm width.
More informationPower consumption In operation At rest For wire sizing. Functional data Torque Motor Spring return. Rated impulse voltage Control pollution degree 3
SRFA Rotary actuator with emergency function for ball valves Torque 20Nm Nominal voltage AC 24...240V / DC 24...125V Control: Open/Close SRFA: Deenergised NC Technical data Electrical data Nominal voltage
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationPosition switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
More informationOutput signal active note. Measuring range rel. pressure. Electrical Data Power supply DC V, ±10%, 1.1 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges and outputs 0 to 5/10 V or 4 to 20 ma. NEMA 4X / IP65 rated enclosure. For monitoring the differential pressure
More informationDP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationPrewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationPosition and Safety Switches
Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047
More informationHinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
More informationElectronic pressure sensors OsiSense XM For control circuits
General Electronic sensors OsiSense XM For control circuits Functions transmitters The function of transmitters is the control and measurement of or vacuum levels in hydraulic or pneumatic systems. They
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationPosition Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationElectrical position feedback for actuator sizes Ø mm
Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local
More informationFloor and fine adjustment switches
Floor and fine adjustment switches 6 Introduction 6-2 AS 1 6-3 ASH 2 6-4 AFH 2 6-5 Reference table technical data 6-6 Universal switches 6-7 Floor and fine adjustment switches / Introduction ➀ ➁ ➂ Floor
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationMultiple Lever Types. Proximity Limit Switch. Circuitry. The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous
Proximity Limit Switch The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous metals. All components are sealed and protected within the rugged brass housing eliminating
More informationScrew limit switches XRBA and XR2. Catalogue
XRBA and XR2 Catalogue Contents XRBA and XR2 Selection guide.............................................. page 2 for standard duty: XRBA Presentation.............................................. page
More informationAP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS
AP1000-2000 Airpower positioners are a robust range of rotary or linear valve positioners in AP1000 electro-pneumatic (4-20mA), AP1200 pneumatic (3-15 psi) or AP2000 programmable smart type. Designed to
More informationSERIES MINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V
More informationSIGUARD Safety Systems Safety Integrated
/ 3SE2 303 / 3SE2 404 and open type SIGUAR Safety Systems Safety Integrated Application The function of the position switches (limit switches) is to produce electrical signals corresponding to the positions
More informationHS6B Series Subminiature Interlock Switch
HS6B Series Subminiature Interlock Switch HS6B features: Only 78 x 30 x 15mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1, EN954-1) Two actuator
More informationControl & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
More informationCompact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
More informationLimit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
More information