L S T E 4 1 L S A 4 0 X 5 4
|
|
|
- Sydney Moore
- 6 years ago
- Views:
Transcription
1 Bodies with contact block for rectilinear or angular motion heads L S 4 5 M 0 0 B 1 1 Limit Switch... LS Casing width: 40 mm... 4 Cable inlet: 1 cable inlet for Pg 13.5 cable gland cable inlet M20 x 1.5 for ISO 20 cable gland cable inlet for 1/2" NPT... 5 Metal casing...m Contacts N.O. + 1 N.C. contacts N.C. contacts N.O. contacts Snap action B...Zb Snap Dependent (slow) action L...Zb Slow / Simultaneous D...Zb Non-overlapping late make C...Zb Overlapping early make LS45M00B11 Without operating head...00 Operating heads L S T E 4 1 Limit Switch... LS Operating head... T For Metal casing 40 mm or 60 mm width...e References of heads: with rectilinear movement (plain plunger, steel ball plunger or roller plunger with rectilinear movement (with lateral plain or...roller plunger) with rectilinear movement (with roller lever on steel plunger) 40...with angular movement (without actuator) actuator to be ordered separately with angular movement (roller lever) 50...with angular movement (without actuator) with angular movement (adjustable roller lever) 61, 62...flexible lever (spring) 71, 72, 73...adjustable lever (rod) multidirectional angular movement (spring rod) Separate actuators (Roller lever, adjustable roller or rod levers, etc.) L S A 4 0 X 5 4 Limit Switch... LS Actuator (roller)... A Casing width: 40 mm...40 Reference of actuators: non-adjustable roller lever adjustable roller lever 61, 62...flexible lever (spring) 71, 72, 73...adjustable lever (rod) For casing: M... Metal P... Plastic X... Plastic or metal LSA40X54 Separate contact blocks L S C 4 0 X B 1 1 LSC40XB11 Limit Switch... LS Contact blocks... C Casing width: 40 mm...40 For casing: Metal... M Plastic...P Plastic or metal...x Contacts N.O. + 1 N.C. contacts N.C. contacts N.O. contacts Snap action: B...Zb Snap Dependent (slow) action: L...Zb Slow / Simultaneous D...Zb Non-overlapping late make C...Zb Overlapping early make.42 Low Voltage Products & Systems
2 Metal Bodies with contact block Operating heads with actuator LSTE54 LSTE3 LSTE72 (D Shape) LSTE44 LSTE53 LSTE71 (D Shape) LSTE23 (G Shape) LSTE21 (F Shape) LSTE33 LSTE43 (A Shape) LSTE2 LSTE52 LSTE22 (G Shape) LSTE12 (B Shape) LSTE32 LSTE42 (A Shape) LSTE62 LSTE13 (C Shape) LSTE11 (B Shape) Rectilinear motion LSTE31 (A Shape) LSTE51 LSTE1 Angular motion LSTE61 LSTE... rectilinear motion heads To be actuated from end. With plunger (plain, lateral plain or ball): LSTE11, LSTE12 and LSTE21. To be actuated by 30 cam translation. With roller plunger: LSTE13, LSTE22 and LSTE23. To be actuated unidirectionally by 30 cam translation. With roller lever on stainless steel plunger: LSTE31... LSTE33. LSTE... angular motion heads To be actuated by 30 cam translation. With roller lever:... LSTE54. To be actuated by fully directional translation movement. With rod or spring lever: LSTE61... LSTE72. To be actuated multidirectionally. With spring rod: LSTE1... LSTE3. Bodies with contact block LS45M00B11, LS45M00D11, LS45M00C11, LS45M00L02, LS45M00B02 LS45M00L20 : Suitable for positive opening operation (IEC and EN 50041). guaranteed if the elements noted Low Voltage Products & Systems.43
3 Bodies with contact blocks Angular motion heads (without actuator) Separate actuators Separate contact blocks LSA40X44 LSA40X54 LSA40X72 LSA40X43 LSA40X53 LSA40X71 LSA40X42 LSA40X52 LSA40X62 LSA40X41 LSA40X51 LSA40X61 Roller levers Adjustable or flexible levers LSTE40 LSTE50 LSTE50 angular motion head For flexible or adjustable levers LSA40X51... LSA40X54, LSA40X61, LSA40X62, LSA40X71 and LSA40X72. LSTE40 angular motion head For roller levers (non-adustable) LSA40X41... LSA40X44 Bodies with contact block LS45M00B11, LS45M00D11, LS45M00C11, LS45M00L02, LS45M00B02 LS45M00L20 Contact blocks LSC40XB11, LSC40XD11, LSC40XC11, LSC40XL02, LSC40XB02 LSC40XL20 : Suitable for positive opening operation (IEC ) with are fitted..44 Low Voltage Products & Systems
4 Metal LS40M00B11 LSTE11 Contact blocks Zb Zb Zb Zb Zb Zb B11 D11 C11 L02 L20 B02 Bodies with contact block for rectilinear or angular motion heads LS45M00B11 $ LS45M00D LS45M00C LS45M00L LS45M00L LS45M00B02 30 Rectilinear motion heads with actuator To be actuated from end Stainless steel plain plunger LSTE11 14 Stainless steel ball plunger LSTE12 17 Stainless steel lateral plain plunger LSTE21 17 To be actuated by 30 cam Stainless steel roller plunger LSTE13 20 Stainless steel lateral plunger with vertical roller LSTE22 21 Stainless steel lateral plunger with horizontal roller LSTE23 21 To be actuated unidirectionally by 30 cam ø 22mm polyamide roller lever on stainless LSTE31 1 steel plunger ø 22mm stainless steel roller lever on stainless steel plunger LSTE32 26 ø 22mm steel ball-bearing roller lever on stainless steel plunger LSTE33 21 LSTE21 LSTE13 LSTE22 LSTE32 Low Voltage Products & Systems Discount schedule RM.45
5 LSTE52 Angular motion heads with actuator To be actuated by 30 cam ø 22mm polyamide roller lever $ 26 ø 22mm stainless steel roller lever LSTE42 34 ø 22mm steel ball-bearing roller lever LSTE43 2 ø 45mm rubber roller lever LSTE44 28 ø 22mm adjustable polyamide roller lever LSTE51 27 ø 22mm adjustable stainless steel roller lever LSTE52 35 ø 22mm adjustable steel ball-bearing roller lever LSTE53 31 ø 45mm adjustable rubber roller lever LSTE54 2 To be actuated by fully directional translation movement Stainless steel flexible lever with insulated end LSTE61 2 Stainless steel coil spring lever LSTE62 2 ø 3mm stainless steel rod lever, 15mm LSTE71 26 ø 6mm polyamide rod lever, 15mm LSTE72 26 ø 6mm fiberglass rod lever, 15mm LSTE73 27 Multidirectional angular motion heads (to be actuated by fully directional translation movement) Stainless steel spring rod LSTE1 17 Stainless steel flexible rod with insulated end LSTE2 1 Stainless steel coil spring rod LSTE3 18 Angular motion head without actuator, for non-adjustable roller levers (delivered with M5 nylstop nut) LSTE40 20 Actuators for angular motion head LSTE40 ø 22mm polyamide roller lever LSA40X41 6 ø 22mm stainless steel roller lever LSA40X42 14 ø 22mm steel ball-bearing roller lever LSA40X43 ø 45mm rubber roller lever LSA40X44 8 LSTE72 LSTE1 LSTE40 LSA40X41 1 Free position adjustment of lever by over Discount schedule RM Low Voltage Products & Systems
6 Metal LSTE52 Angular motion heads with actuator To be actuated by 30 cam ø 22mm polyamide roller lever $ 26 ø 22mm stainless steel roller lever LSTE42 34 ø 22mm steel ball-bearing roller lever LSTE43 2 ø 45mm rubber roller lever LSTE44 28 ø 22mm adjustable polyamide roller lever LSTE51 27 ø 22mm adjustable stainless steel roller lever LSTE52 35 ø 22mm adjustable steel ball-bearing roller lever LSTE53 31 ø 45mm adjustable rubber roller lever LSTE54 2 To be actuated by fully directional translation movement Stainless steel flexible lever with insulated end LSTE61 2 Stainless steel coil spring lever LSTE62 2 ø 3mm stainless steel rod lever, 15mm LSTE71 26 ø 6mm polyamide rod lever, 15mm LSTE72 26 ø 6mm fiberglass rod lever, 15mm LSTE73 27 Multidirectional angular motion heads (to be actuated by fully directional translation movement) Stainless steel spring rod LSTE1 17 Stainless steel flexible rod with insulated end LSTE2 1 Stainless steel coil spring rod LSTE3 18 Angular motion head without actuator, for non-adjustable roller levers (delivered with M5 nylstop nut) LSTE40 20 Actuators for angular motion head LSTE40 ø 22mm polyamide roller lever LSA40X41 6 ø 22mm stainless steel roller lever LSA40X42 14 ø 22mm steel ball-bearing roller lever LSA40X43 ø 45mm rubber roller lever LSA40X44 8 LSTE72 LSTE1 LSTE40 LSA40X41 1 Free position adjustment of lever by over 360 Low Voltage Products & Systems Discount schedule RM.47
7 LSTE50 Angular motion head without actuator, for flexible or adjustable levers (delivered with M5 nylstop nut & adaptation parts) LSTE50 $ 22 Actuators for angular motion head LSTE50 ø 22mm adjustable polyamide roller lever LSA40X51 5 ø 22mm adjustable stainless steel roller lever LSA40X52 13 ø 22mm adjustable steel ball-bearing roller lever LSA40X53 ø 45mm adjustable rubber roller lever LSA40X54 7 Stainless steel flexible lever with insulated end LSA40X61 7 Stainless steel coil spring lever LSA40X62 7 ø 3mm adjustable stainless steel rod lever, 15mm LSA40X71 4 ø 6mm adjustable polyamide rod lever, 15mm LSA40X72 4 ø 6mm adjustable fiberglass rod lever, 15mm LSA40X73 5 Contact blocks (with adaptor) 1 NC & 1 NO 2-pole snap action LSC40XB NC & 1 NO 2-pole non-overlapping slow action LSC40XD NO & 1 NC 2-pole overlapping slow action LSC40XC NC 2-pole simultaneous slow action LSC40XL NO 2-pole simultaneous slow action LSC40XL20 17 Bipolar 2 NC 2-pole snap action LSC40XB02 17 LSA40X52 LSA40X71 LSA40X61 LSC40XB11.48 Discount schedule RM Low Voltage Products & Systems 1 Free position adjustment of lever by over According to lever.
Limit Switches Metal casing, 40mm & 60mm Assembled Components
Limit Switches Metal casing, & mm Assembled Components Metal Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 2 dimensions: LS4M, width.
Limit switches. Metal. Limit Switches Metal casing, 30mm, 40mm & 60mm
Limit Switches casing, 3mm, 4mm & 6mm Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 3 dimensions: LS3M, 3mm width. LS4M, 4mm width.
LS Series Limit Switches. Short Form Catalogue AC1300 ABB
Short Form Catalogue LS Series Limit Switches AC ABB LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic
LS series limit switches
Assortment guide LS series limit switches The necessary complement for detection 1SBC 0023 99 R1002 Low Voltage Products A modern and complete range LS series limit switches Plastic casing Double insulation
DP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
Metal limit switches are made of zinc alloy and have a degree of protection of IP67 and NEMA Type 4, 4X.
Limit switches pre-wired 3mm & 35mm Metal & plastic casings Limit switches Description Plastic are made of reinforced UL-VO thermoplastic fiberglass, offering double insulation and protection
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Comepi Limit Switches
Comepi Limit Switches Features and specifications Approvals CSA, culus IP rating (IEC 60529 and EN 60529 OR IEC 536) IP65-67 Operating temperature -25 to 70ºC (low temperature version available -40 to
Limit Switches - Limit Type (PS31L) Plastic Body IP65
Limit Switches - Limit Type (PSL) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
Limit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Limit Switches - Limit Type (PS21L) Metal Body IP66
Limit Switches - Limit Type (PS21L) Metal Body IP66 High mechanical resistance Degree of protection IP66 Zinc alloy (Zamack) or aluminium body Positive Opening Operation Minimum Actuation Force/Torque
Limit Switch - Prewired Type Metal Body
Limit Switch - Prewired Type Metal Body Sealed with epoxy resin al the base of the box Degree of protection IP67 Thermoplastic material or diecast zinc alloy body Positive Opening Operation Minimum Actuation
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
Limit Switches - Limit Type (PS42L) Plastic Body IP65
Limit Switches - Limit Type (PS42L) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
Gross Automation (877)
Limit Switches Carlo Gavazzi broadens its leading range of products for the industrial automation world, with the new and complete range of mechanical limit and safety switches. These robust switches provide
Limit switches Osiswitch Classic For hoisting and materials handling applications, type XCR Complete switches with 1 cable entry
References, characteristics For hoisting and materials handling applications, type XCR Complete switches with cable entry Type of head Rotary with spring return to off position Stay put Maximum displacement
Limit switches 0 ZCK E67 ZCK E23 ZCK E62. with contact, cable. entry for Pg 13, fi xed, 1 step (2) (3) ZCK JD3p, ZCK J1, J5, J6, J7, J9
Presentation Variable composition: standard bodies Thermoplastic roller lever plunger, 1 direction of actuation Steel roller lever plunger, 1 direction of actuation ZCK E1 ZCK E3 Side metal plunger Side
Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E0 I E20 I E40 I Contact blocks (standard) M20 ½ NPT 00 NO+NC snap action 0 NO+NC slow action 02 NO+NC slow action with
D4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
Miniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
Position Switches Series 8074/2
www.stahl.de > Ex e metal enclosure > Operating temperature range -40 C... +70 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 > Extensive assortment of actuators,
Double insulated, types XCK-P and XCK-T. With head for linear movement (plunger) operators
Double insulated, types XCK-P and XCK-T Presentation XCK-P with 1 cable entry, conforming to CENELEC EN 57 With head for linear movement (plunger) operators Page 18 With head for rotary movement (lever)
Position switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
Limit switches Osiswitch Classic Metal, conforming to CENELEC EN 50041, type XCK J Fixed or plug-in body Variable composition: standard bodies
Presentation Metal, conforming to CENELEC EN 41, type XCK J Variable composition: standard bodies ZCKE1 ZCKE ZCKE63 ZCKE64 ZCKE6 ZCKE8 ZCKE6 ZCKE67 ZCKE69 ZCKE61 ZCKE66 ZCKE619 ZCKJ1D, JD, J6D, J7D ZCKJ8D
Position switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
ZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29
ZCK-Y39 ZCK-Y43 ZCK-Y49 ZCK-Y41 ZCK-D239 ZCK-D23 ZCK-D59 ZCK-Y55 ZCK-Y54 ZCK-Y59 ZCK-D219 ZCK-D21 ZCK-D81 ZCK-D91 ZCK-Y91 ZCK-Y31 ZCK-Y33 ZCK-Y34 ZCK-Y81 ZCK-D029 ZCK-D02 ZCK-D05 ZCK-D109 ZCK-D41 ZCK-D06
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
Limit switches. Steel roller plunger. Metal end plunger with elastomer boot 4.6(P) mm
characteristics Complete switches with cable entry Type of head Plunger (fixing by the body) Form B () Form C () Form E () with elastomer boot Steel roller References of complete switches with ISO M x
Position switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
Limit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
Limit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
ED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
Safety Limit Switches
Safety Limit Switches with separate actuator Z02: Snap action 2NC Y+Y 3 Bent key 4 Flat key 5 Bent key 6 Flat key 7 Shock absorbing bent key 8 Shock absorbing flat key 9 Adjustable joint key Z11: Snap
Compact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
Floor and fine adjustment switches
Floor and fine adjustment switches 6 Introduction 6-2 AS 1 6-3 ASH 2 6-4 AFH 2 6-5 Reference table technical data 6-6 Universal switches 6-7 Floor and fine adjustment switches / Introduction ➀ ➁ ➂ Floor
Safety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
Limit Switches AT0 - Features
AT0 - Features 06/005 High Control Circuit Reliability with Universal s With low control circuit voltage, an increased number of circuit failures can occur in electrical control systems. That is the reason
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
Pre wired limit switches
Pre wired limit switches Selection diagram Actuators A B B 9 BL Thermoplastic Bodies E7 I s NO+NC snap action NO+NC slow action Cable entry 4 or 5 pole PVC sheath cable (standard) M connector AMP connector
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B 3 H G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
SERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE
SERIES Z/T23 Safety-Rated, Positive-Break Miniature DIN Limit Switches Features & Benefits Positive-Break NC contacts won t stick or weld shut. Watertight design meets IP washdown requirements. Rugged,
Position switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
Limit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
ED SERIES SAFETY LIMIT SWITCH Description
Description The ED series safety limit switches conform to EN 50047 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
Position Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
Presentation. Limit switches. b XC2J. v With head for linear movement (plunger) with 1 cable entry. v With head for rotary movement (lever)
Presentation b XCJ with cable entry v With head for linear movement (plunger) v With head for rotary movement (lever) General characteristics Environment characteristics Conformity to standards Standard
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
YFC. Limit switch. Ex d. 24 operating head types
Ex d YFC Limit switch 24 operating head types - Group IIC - Zone 1, 2, 21, 22 - Aluminium alloy - Easy installation, wiring and maintenance - Durable and safe over time Fastening system Earth screw RAL735
Switches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
Miniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
Position Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
Safety components. MAC-I limit switches NEW! Features
NEW! Safety components MAC-I limit switches Features The MAC-I limit switches are developed and manufactured according to the rules set out in IEC international publications and EN European standards.
Automation - Lift - Handling System - Atex
Automation Lift Handling System Atex GIOVENZANA INTERNATIONAL B.V.: AUTOMATION TECHNOLOGIES AUTOMATION The solutions offered by Giovenzana are the results of the market analysis of industrial electrical
Proximity Sensors. Photoelectric Sensors IEC. Encoders. Current Sensors. Pressure Sensors and Gauges. Temperature Sensors and Thermometers
Proximity Section 8 In this interactive PDF you can: electric Section 9 IEC Limit Switches Section 0 Encoders Section IEC Use bookmarks to navigate by product category Use bookmarks to save, search, print
XCKP2145P16 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16
Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 47.90 USD Main Range
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
Limit switches. Flameproof - Group IIC XCWD series. from the latest developments: modularity, compactness, a very broad range of actuators.
Sensors Limit switches Flameproof - Group IIC XCWD series from the latest developments: modularity, compactness, a very broad range of actuators. They are designed for intensive use and a very good repeatability.
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
Limit Switches >> EKU1 series page 635 >> Limit switches for AS-Interface page 641 >> K series page 647 >> GW series page 653 >> O /P series page 659
632 >> EKU1 series page 63 >> Limit switches for AS-Interface page 641 >> K series page 64 >> GW series page 3 >> O /P series page 9 >> Accessories page 661 633 634 Georg Schlegel GmbH & Co. KG - 882 Dürmentingen
FOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
OsiSense. XC Basic Limit Switches XCMN, XCKN, XCNT
OsiSense XC Basic Limit Switches XCMN, XCKN, XCNT Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com - www.stevenengineering.com Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com
GENERAL PURPOSE. 3 Port 1/8 Pilot Valves Two Hands Safety Valve BC 1/4 Body Ported Valves : Mechanically Operated...
GENERAL PURPOSE 3 Port 1/8 Pilot Valves.........................19 Two Hands Safety Valve....................... 199 BC 1/ Body Ported Valves :.................... 00 Mechanically Operated.................
Limit switches. Presentation. OsiSense XC Special For hoisting and material handling applications XCR. b XCR
Presentation For hoisting and material handling applications XCR b XCR v With head for rotary movement operators, spring return to off position 1 contact actuation position per direction Page 326/6 v With
D4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissi
SERIES B VALVES AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 Two-Way Types for bleeding pilots of larger valves, for bleeding cylinders or small pressure systems, operating air tools or motors, opening
Position and Safety Switches
Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047
Safety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
LR-LX-LK-LW Safety Switches with separate actuator
LR-LX-LK-LW Safety Switches with separate actuator Technopolymer housing, from one to three conduit entries Protection degree IP67 15 contact blocks available 8 stainless steel actuators available Versions
Safety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
Prewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
SIGUARD Safety Systems Safety Integrated
/ 3SE2 303 / 3SE2 404 and open type SIGUAR Safety Systems Safety Integrated Application The function of the position switches (limit switches) is to produce electrical signals corresponding to the positions
Actuartors available. CZE Limit Switch. Direct movement. Angular movement. Multi-directional movement A/S1. Steel plunger
CZE Limit Switch ctuartors available Direct movement /S1 Steel plunger Steel plunger with ruber gasket B Steel roller plunger C C/S1 D D/S1 R Thermoplastic roller lever, side actuation lever, with rubber
Product Catalogue. Version 8.0. Section. FUWA Axle Components
Product Catalogue Section E Version 8.0 FUWA Section E Fuwa - Cam and Brake Assembly E:48 PRODUCT CATALOGUE 8.0 Fuwa - Cam and Brake Assembly Part List - 6 axle tube (square) - 5 axle tube (round) TL-11-427-800045
Command, control and regulation
186 CONTROL SYSTEMS Command, control and regulation Mechanical regulators... 188 NO-NC thermostats... 191 Twin thermostats... 192 Change-over thermostats... 193 Hygrostats... 194 Flashing signal device...
XCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
SFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
Multiple Lever Types. Proximity Limit Switch. Circuitry. The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous
Proximity Limit Switch The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous metals. All components are sealed and protected within the rugged brass housing eliminating
D4NH. Model Number Structure. Safety-door Hinge Switch. Model Number Legend
Safety-door Hinge Switch Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Lineup includes three contact models with 2NC/1NO and 3NC contact forms
Metal Position Switch Series 8074
> Dimensions and characteristic values according to EN 50041 > Replaceable contact element in flameproof enclosure > Positive opening contacts > Wide range of actuators > All actuators can be displaced
Safety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
PN9400 Series. Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves
Page 1 of 5 TI-P328-01 CH Issue 1 PN9400 Series ISO 9001 Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Cert. No. LRQ 0963008 Description The PN9400 series actuators are a compact range
Selection diagram. Actuators. Bodies. Contact blocks. Cable entry AB BB CB. Thermoplastic
Safety switches Selection diagram Actuators AB BB CB TB S5 SC Thermoplastic Bodies E0 I E20 I E0 I Contact blocks 0 NO+NC slow action 0 2NC slow action 08 2NC slow action (for pull-wire switches) Pg 3,5
Technical data. Standards: IEC/EN BG-GS-ET-15
1 Technical data Contact variants 7 30 2 2 Long life Multiple coding Thermoplastic enclosure Double insulated X 3 cable entries M20 Large wiring compartment High level of contact reliability with low voltages
PRECISION SWITCHES CONTENTS
PRECISION SWITCHES CONTENTS Limit Switches to EN50041 LIMIT SWITCHES The TEKNIC Limit Switch Precision, Reliability and Versatility. The TEKNIC Limit switch is a versatile unit, according to the EUROPEAN
Single foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
International, LLC. HMS/HLS/HNS Series Heavy Duty Limit Switches. Specifications. Features. Electrical Ratings HNS HLS HMS. Non-plug-in.
HMS/HLS/HNS Series Heavy Duty Limit Switches Features Heavy duty zinc die cast body Conform to EN 6097-5-1, IEC 6097-5-1, UL508, NEMA250, CSA22.2 Standards Wide range of actuator available High repeatability
XCS Safety Interlock Selection
Steven Engineering-2 Ryan Way-South San Francisco, CA 980-6370-Main Office:(650)588-9200-Outside Local Area:(800)258-9200-www.stevenengineering.com Selection Plastic, Double, Turret Head c, Type, locking
Prewired position switches FF series
2 Prewired position switches FF series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45 46
K50H004UP cam changeover switch - 4-pole A - screw mounting
Characteristics cam changeover switch - 4-pole - 60-50 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
G1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam