International, LLC. HMS/HLS/HNS Series Heavy Duty Limit Switches. Specifications. Features. Electrical Ratings HNS HLS HMS. Non-plug-in.
|
|
|
- Ilene Kelly
- 5 years ago
- Views:
Transcription
1 HMS/HLS/HNS Series Heavy Duty Limit Switches Features Heavy duty zinc die cast body Conform to EN , IEC , UL508, NEMA250, CSA22.2 Standards Wide range of actuator available High repeatability (0.03mm for linear travel) Available in three body styles: compact, standard and Non-plug-in Electrical Ratings Designation & Utilization Category AC15 A600 IEC / EN V 20V 380V 80V 600V 6A 3A 1.9A 125VDC 250VDC DC13 Q Rated operational current Ie (A) at rated operational voltage Ue 1.5A A VA rating Make Break Specifications Operating Speed Rated Current/Voltage Service Life Operating Temperature Vibration Resistance Shock Resistance Dielectric Strength Short Circuit Protection Terminal Wire Size Degree of Protection 0.05mm-2m/sec 10A/600V AC (EN ) AC15 A600 / DC13 Q300 Mechanically 10 millions (operations) Electrically 1 million (operations) -28.9~+85 o C (-20~185 o F) 25gn ( Hz, ms) per IEC gn (9ms) per IEC VAC for 1 minute 10A fuse 12-22AWG ( mm 2 ) IP 67 conforming to IEC 60529, NEMA Types 2,, 6, 6P, 12, 13 * Wider operating temperature models are available. Please contact us. HMS Compact HLS Standard HNS Non-plug-in Selection Guide: HLS 1 A 0 A - F - UR Body Styles HMS: Compact HLS: Standard HNS: Non-plug-in Contact Block 1/2NPT Conduit (Contact us for 1: SPDT (1NO/1NC) Snap action other types) 2: DPDT (2NO/2NC) Snap action 3: DPDT (2NO/2NC) 2 stages : DPDT (2NO/2NC) center neutral operation 5: NO Slow action (for HNS only) 6: 3NO/1NC Slow action (for HNS only) 7: 2NO/2NC Slow action (for HNS only) 8: 1NO/3NC Slow action (for HNS only) 9: NC Slow action (for HNS only) Head Style 2 digit or 2 digit + 1 letter Applied on to Lever Arms Style B: Standard A: High precision N: Low torque D: High precision low torque C: TB: Neutral position TA: Neutral position (high precision) E: 360 rotation Rubber Seal Type Blank: Standard F: Fluorite rubber Indicator Light Blank: None UR: Red indicator light universal voltage(12v-270v) Rotary Head Shaft Diameter Blank:.0mm (AB): 8.0mm (CH): 7.0mm (HW): 7.3mm 165
2 HMS/HLS Series Heavy Duty Limit Switches Plunger type 01 Styles Styles HMS-1A/ HMS-2A/ HMS-3A/ HLS-1A HLS-2A HLS-3A 1NO/1NC 2NO/2NC 2NO/2NC(2-stages) mm 0mm 0mm 12 Styles 13 Styles 05 Styles 18N (.05 lb) N (.05 lb) N 2.5 (.05 lb) mm 6.3 mm 6.3 mm Side Plunger type H Styles 12H Styles 13H Styles * Note: Operating Force () is 31.1N(7 lb)for Plunger type 01 style. 0mm 0mm 0mm N (.05 lb) 18N (.05 lb) N (.05 lb) mm 6.3 mm 6.3 mm Side Plunger () type 10H Styles 0mm 0mm 31.1N (7 lb) N (7 lb) mm 6.3 mm ON F Spring coil type 15 o 0.N-m (3.5 lb-in) 5 o 0.N-m (3.5 lb-in) 15 o 5o 1 o 5 1 o 0.N-m (3.5 lb-in) Cat Whisker type 68 Styles N-m (7 oz-in) 6 o N-m (7 oz-in) 6 o 1 o 19 o 0.05N-m (7 oz-in) 6 o
3 HMS/HLS Series Heavy Duty Limit Switches Travel Diagram for Rotary Lever Styles ON F 1NO/1NC 1NO/1NC 2NO/2NC 2NO/2NC 2NO/2NC 2NO/2NC Standard Low differential Standard Low differential Standard Low differential o 0.5N-m ( lb-in) 5 o 8 o 0.5N-m ( lb-in) o 15 o 0.5N-m ( lb-in) 5 o 8 o o 0.5N-m ( lb-in) 0.5N-m ( lb-in) o 15 o 17.5 o 0.5N-m ( lb-in) o 6 o 8 o 10.5 o HMS-1A-0B HMS-1A-0A HLS-1A-0B HLS-1A-0A HLS-2A-0B HLS-2A-0A HLS-3A-0B HLS-3A-0A 15 o 0.2N-m (28.3 oz-in) 5 o 8 o 0.2N-m (28.3 oz-in) o 5 o 1 0.2N-m (28.3 oz-in) 0.2N-m (28.3 oz-in) 8 o o 0.2N-m (28.3 oz-in) o 15 o 17.5 o 0.2N-m (28.3 oz-in) o 6 o 8 o 10.5 o HMS-1A-0N HMS-1A-0D HLS-1A-0N HLS-1A-0D HLS-2A-0N HLS-2A-0D HLS-3A-0N HLS-3A-0D 1NO/1NC 2NO/2NC 2NO/2NC 2NO/2NC Neutral Position (standard) Neutral Position (low differential) CW CCW CW CCW 7 5 o 0.5N-m ( lb-in) 5 o 0.5N-m ( lb-in) CW 9 15 o 0.5N-M 1 ( LB-in) 1 15 o CW 9 8 o 0.5N-M o ( LB-in) o 8 o CCW 9 CCW 9 HMS-1A-0C HLS-1A-0C HLS-2A-0C HLS-A-0TB HLS-A-0TA 167
4 HMS Series Heavy Duty Limit Switches O10 O HMS-1A-: 1NO/1NC HMS-1A-12: 1NO/1NC Adjustable Operating Position (OP) O HMS-1A-13: 1NO/1NC HMS-1A-01: 1NO/1NC (1) (2) HMS-1A-H: 1NO/1NC HMS-1A-12H: 1NO/1NC * Note: roller can be adjust to cross orientation 168
5 HMS Series Heavy Duty Limit Switches Adjustable Operating Position (OP) (1) (2) HMS-1A-13H: 1NO/1NC HMS-1A-10H: 1NO/1NC HMS-1A-0C: 1NO/1NC HMS-1A-0B: 1NO/1NC HMS-1A-0A: 1NO/1NC HMS-1A-0N: 1NO/1NC HMS-1A-0D: 1NO/1NC Standard Pretravel Low Pretravel Low Torque Low Torque, Low Pretravel Head is factory set to operate the contacts in both the CW and CCW directions. To make change, simply pull out and rotate the arrow to the letters representing the desired direction: CW, CCW, or CW/CCW. 169
6 HMS Series Heavy Duty Limit Switches HMS-1A-66: 1NO/1NC HMS-1A-68: 1NO/1NC HMS-1A-69: 1NO/1NC HMS-1A-00: 1NO/1NC 170
7 HLS Series Heavy Duty Limit Switches O 10 O O HLS-1A-: 1NO/1NC HLS-2A-: 2NO/2NC HLS-3A-: 2NO/2NC (2-stage) HLS-1A-12: 1NO/1NC HLS-2A-12: 2NO/2NC HLS-3A-12: 2NO/2NC (2-stage) 9.9 O HLS-1A-13: 1NO/1NC HLS-2A-13: 2NO/2NC HLS-3A-13: 2NO/2NC (2-stage) HLS-1A-01: 1NO/1NC HLS-2A-01: 2NO/2NC HLS-3A-01: 2NO/2NC (2-stage) O Adjustable Operating Position (OP) O * Note: roller can be adjust to cross orientation HLS-1A-H: 1NO/1NC HLS-2A-H: 2NO/2NC HLS-3A-H: 2NO/2NC (2-stage) HLS-1A-12H: 1NO/1NC HLS-2A-12H: 2NO/2NC HLS-3A-12H: 2NO/2NC (2-stage) 171
8 HLS Series Heavy Duty Limit Switches HLS-1A-13H: 1NO/1NC HLS-2A-13H: 2NO/2NC HLS-3A-13H: 2NO/2NC (2-stage) HLS-1A-10H: 1NO/1NC HLS-2A-10H: 2NO/2NC HLS-1A-05B: 1NO/1NC HLS-2A-05B: 2NO/2NC HLS-1A-0B: 1NO/1NC Standard Pretravel HLS-1A-0A: 1NO/1NC Low Pretravel HLS-1A-0N: 1NO/1NC Low Torque HLS-1A-0D: 1NO/1NC Low Torque, Low Pretravel HLS-2A-0B: 2NO/2NC Standard Pretravel HLS-2A-0A: 2NO/2NC Low Differential Travel HLS-2A-0N: 2NO/2NC Low Torque HLS-2A-0D: 2NO/2NC Low Torque, Low Pretravel HLS-3A-0B: 2NO/2NC (2-stage) Standard Pretravel HLS-3A-0A: 2NO/2NC (2-stage) Low Pretravel HLS-3A-0N: 2NO/2NC (2-stage) Low Torque HLS-3A-0D: 2NO/2NC (2-stage) Low Torque, Low Differential Travel Head is factory set to operate the contacts in both the CW and CCW directions. To make change, simply pull out and rotate the arrow to the letters representing the desired direction: CW, CCW, or CW/CCW. Neutral Position HLS-A-0TA: 2NO/2NC (Low Pretravel) HLS-A-0TB:2NO/2NC HLS-1A-0C: 1NO/1NC HLS-2A-0C: 2NO/2NC 172
9 HLS Series Heavy Duty Limit Switches HLS-1A-0E: 1NO/1NC HLS-2A-0E: 2NO/2NC HLS-3A-0E: 2NO/2NC (2-stage) HLS-1A-0E-UR(HW): 1NO/1NC HLS-2A-0E-UR(HW): 2NO/2NC 173
10 HLS Series Heavy Duty Limit Switches HLS-1A-66: 1NO/1NC HLS-2A-66: 2NO/2NC HLS-3A-66: 2NO/2NC (2-stage) HLS-1A-68: 1NO/1NC HLS-2A-68: 2NO/2NC HLS-3A-68: 2NO/2NC (2-stage) HLS-1A-69: 1NO/1NC HLS-2A-69: 2NO/2NC HLS-3A-69: 2NO/2NC (2-stage) HLS-1A-00: 1NO/1NC HLS-2A-00: 2NO/2NC HLS-3A-00: 2NO/2NC (2-stage) 17
11 HLS (AB) Series Heavy Duty Limit Switches HLS-1A-(AB): 1NO/1NC HLS-2A-(AB): 2NO/2NC HLS-3A-(AB): 2NO/2NC (2-stage) HLS-1A-12(AB): 1NO/1NC HLS-2A-12(AB): 2NO/2NC HLS-3A-12(AB): 2NO/2NC (2-stage) Adjustable Operating Position (OP) HLS-1A-13(AB): 1NO/1NC HLS-2A-13(AB): 2NO/2NC HLS-3A-13(AB): 2NO/2NC (2-stage) HLS-1A-01(AB): 1NO/1NC HLS-2A-01(AB): 2NO/2NC HLS-3A-01(AB): 2NO/2NC (2-stage) HLS-1A-H(AB): 1NO/1NC HLS-2A-H(AB): 2NO/2NC HLS-3A-H(AB): 2NO/2NC (2-stage) * Note: roller can be adjust to cross orientation HLS-1A-12H(AB): 1NO/1NC HLS-2A-12H(AB): 2NO/2NC HLS-3A-12H(AB): 2NO/2NC (2-stage) 175
12 HLS(AB) Series Heavy Duty Limit Switches HLS-1A-13H(AB): 1NO/1NC HLS-2A-13H(AB): 2NO/2NC HLS-3A-13H(AB): 2NO/2NC (2-stage) HLS-1A-10H(AB): 1NO/1NC HLS-2A-10H(AB): 2NO/2NC HLS-1A-0C(AB): 1NO/1NC HLS-2A-0C(AB): 2NO/2NC Neutral Position HLS-1A-0B(AB): 1NO/1NC Standard Pretravel HLS-1A-0A(AB): 1NO/1NC Low Pretravel HLS-1A-0N(AB): 1NO/1NC Low Torque HLS-1A-0D(AB): 1NO/1NC Low Torque, Low Pretravel HLS-2A-0B(AB): 2NO/2NC Standard Pretravel HLS-2A-0A(AB): 2NO/2NC Low Differential Travel HLS-2A-0N(AB): 2NO/2NC Low Torque HLS-2A-0D(AB): 2NO/2NC Low Torque, Low Pretravel HLS-3A-0B(AB): 2NO/2NC (2-stage) Standard Pretravel HLS-3A-0A(AB): 2NO/2NC (2-stage) Low Pretravel HLS-3A-0N(AB): 2NO/2NC (2-stage) Low Torque HLS-3A-0D(AB): 2NO/2NC (2-stage) Low Torque, Low Differential Travel Head is factory set to operate the contacts in both the CW and CCW directions. To make change, simply pull out and rotate the arrow to the letters representing the desired direction: CW, CCW, or CW/CCW. HLS-A-0TA(AB): 2NO/2NC (Low Pretravel) HLS-A-0TB(AB): 2NO/2NC 176
13 HLS (AB) Series Heavy Duty Limit Switches HLS-1A-66(AB): 1NO/1NC HLS-2A-66(AB): 2NO/2NC HLS-3A-66(AB): 2NO/2NC (2-stage) HLS-1A-68(AB): 1NO/1NC HLS-2A-68(AB): 2NO/2NC HLS-3A-68(AB): 2NO/2NC (2-stage) HLS-1A-69(AB): 1NO/1NC HLS-2A-69(AB): 2NO/2NC HLS-3A-69(AB): 2NO/2NC (2-stage) HLS-1A-00(AB): 1NO/1NC HLS-2A-00(AB): 2NO/2NC HLS-3A-00(AB): 2NO/2NC (2-stage) 177
14 HMS Series Heavy Duty Limit Switches HNS-1A-: 1NO/1NC HNS-1A-12: 1NO/1NC Adjustable Operating Position (OP) HNS-1A-13: 1NO/1NC HNS-1A-H: 1NO/1NC HNS-1A-12H: 1NO/1NC HNS-1A-13H: 1NO/1NC * Note: roller can be adjust to cross orientation 178
15 HNS Series Heavy Duty Limit Switches Adjustable Operating Position (OP) HNS-1A-01: 1NO/1NC HNS-1A-10H: 1NO/1NC HNS-1A-0C: 1NO/1NC HNS-1A-0B: 1NO/1NC HNS-1A-0A: 1NO/1NC HNS-1A-0N: 1NO/1NC HNS-1A-0D: 1NO/1NC Standard Pretravel Low Pretravel Low Torque Low Torque, Low Pretravel Head is factory set to operate the contacts in both the CW and CCW directions. To make change, simply pull out and rotate the arrow to the letters representing the desired direction: CW, CCW, or CW/CCW. 179
16 HNS Series Heavy Duty Limit Switches Adjustable Operating Position (OP) HNS-1A-0E: 1NO/1NC HNS-1A-05B: 1NO/1NC HNS-1A-70: 1NO/1NC 180
17 HNS Series Heavy Duty Limit Switches HNS-1A-66: 1NO/1NC HNS-1A-68: 1NO/1NC HNS-1A-69: 1NO/1NC HNS-1A-00: 1NO/1NC 181
Safety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
Heavy Duty, Industrial General Specifications XCKJ. Electrical Ratings Non-plug-in: A300 (AC), Q300 (DC)
Heavy Duty, Industrial General Specifications Rated Power Conforms to IEC 947-5-1, duty categories AC15 and DC13. emperature range -13 F to 158 F (-25 C to 7 ); optional -4 F (-4 C); +248 F (12 C). he
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
Double insulated, types XCK-P and XCK-T. With head for linear movement (plunger) operators
Double insulated, types XCK-P and XCK-T Presentation XCK-P with 1 cable entry, conforming to CENELEC EN 57 With head for linear movement (plunger) operators Page 18 With head for rotary movement (lever)
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
D4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
D4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
Limit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
Safety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
Limit Switches - Limit Type (PS21L) Metal Body IP66
Limit Switches - Limit Type (PS21L) Metal Body IP66 High mechanical resistance Degree of protection IP66 Zinc alloy (Zamack) or aluminium body Positive Opening Operation Minimum Actuation Force/Torque
Limit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
Limit Switches - Limit Type (PS31L) Plastic Body IP65
Limit Switches - Limit Type (PSL) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
Position switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
Pre wired limit switches
Pre wired limit switches Selection diagram Actuators A B B 9 BL Thermoplastic Bodies E7 I s NO+NC snap action NO+NC slow action Cable entry 4 or 5 pole PVC sheath cable (standard) M connector AMP connector
Compact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
Robust General-Purpose Limit Switch WL
Robust General-Purpose Limit Switch WL Wide Selection of Two-Circuit Double-Break Limit Switches Rugged diecast housing High mechanical strength Oiltight, waterproof, dustproof construction Overtravel
Model Number Structure
Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action
Miniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJA Series Positive opening mechanism Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives
LJASeries. Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJASeries Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives and to acquire CE marking.
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B 3 H G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Limit Switches - Limit Type (PS42L) Plastic Body IP65
Limit Switches - Limit Type (PS42L) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Microswitches MK Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
Microswitches M series
Microswitches M series Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin. Protection degree: IP40 (with protection art. VF C0) IP0 (with protection
Limit Switch - Prewired Type Metal Body
Limit Switch - Prewired Type Metal Body Sealed with epoxy resin al the base of the box Degree of protection IP67 Thermoplastic material or diecast zinc alloy body Positive Opening Operation Minimum Actuation
Position switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
Limit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
D4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
Single foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
Limit Switches E47 Precision Switches
1 PG.0C.0.T.E July 0 E47 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................ 2 Model
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
Manual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
ED SERIES SAFETY LIMIT SWITCH Description
Description The ED series safety limit switches conform to EN 50047 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
ED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
D4D-N. Safety Limit Switch. Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking. H Contacts opened by positive opening
Safety Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking H Contacts opened by positive opening mechanism (NC contacts only) H Double insulation makes ground terminal
Position switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
Small Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
Microswitches MK series
D Microswitches MK series Introduction Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica (cross-reference at page
FOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
Limit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
VL Series. General Purpose Compact Limit Switches. Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
onlinecomponents.com VL Series General Purpose Compact Limit Switches Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
Non-Spring Return EconoDrive Floating Actuator
MF4D-0x Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
OsiSense. XC Basic Limit Switches XCMN, XCKN, XCNT
OsiSense XC Basic Limit Switches XCMN, XCKN, XCNT Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com - www.stevenengineering.com Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com
SFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
Safety Switches & Operator Controls
Safety Switches & Operator Controls Contents Selection Guide H-2 Safety Limit Switches Plastic D4N H-4 D4N- R H-12 Safety Limit Switches Metal D4B- N H-13 D4F H-13 Safety Selector Switch A22TK H-14 Enabling
Position switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
Switches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
Contents. Limit Switches. Quick Selection Guide... page 6 2. Technical Definitions and Terminology... page 6 6
Contents.............. page 6 2 Technical Definitions and Terminology......................... page 6 6 Bulletin 801 General Purpose....... page 6 7 Bulletin 802A International Style Position Switches..................
D4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
Single foot switches PX and PA series
Single foot switches PX and PA series Technical data Housing Made of polymer glass-reinforced shock-proof thermoplastic resin with double insulation Bedplate with non-skid rubber feet. Actuation force:
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E0 I E20 I E40 I Contact blocks (standard) M20 ½ NPT 00 NO+NC snap action 0 NO+NC slow action 02 NO+NC slow action with
2.11. Limit Switches. Contents Description. Special Purpose Limit Switches. Special Purpose Limit Switches
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com.11 Product Description Features Special Purpose (Type F), Rotating Shaft (Type J),
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
2006 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½" input shaft is connected to a worm gear. Adjustable self-lubricating nylon
HL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
blocks Interconnection fuses &
22mm DIAMETER CONTROL SWITCHES Flush Push Buttons CCTTR p17 On/Off Push Button CCTTR0 p17 Arrow Buttons CCTTRA p17 Start/Stop Push Button Start/Stop CCTTRS p18 On/Off CCTTRO p18 40mm E-Stop Key Release
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
Safety-door Switch. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Positively Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Special Operation Key prevents mis-operation.
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
LS Series Limit Switches. Short Form Catalogue AC1300 ABB
Short Form Catalogue LS Series Limit Switches AC ABB LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic
LIMIT SWITCHES & POSITION INDICATION
LIMIT SWITCHES & POSITION INDICATION Engineering Creative Solutions for Fluid Systems Since 1901 TECHNOPOLYMER LIMIT SWITCH DESCRIPTION The Pratt Industrial MS41-2 Limit Switch Box represents a new dimension
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
Selection diagram. Actuators. Bodies. Contact blocks. Cable entry AB BB CB. Thermoplastic
Safety switches Selection diagram Actuators AB BB CB TB S5 SC Thermoplastic Bodies E0 I E20 I E0 I Contact blocks 0 NO+NC slow action 0 2NC slow action 08 2NC slow action (for pull-wire switches) Pg 3,5
Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm
Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418
Type Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
Metal limit switches are made of zinc alloy and have a degree of protection of IP67 and NEMA Type 4, 4X.
Limit switches pre-wired 3mm & 35mm Metal & plastic casings Limit switches Description Plastic are made of reinforced UL-VO thermoplastic fiberglass, offering double insulation and protection
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
Introduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on)
Introduction to Armature Actuated Brakes (AAB) The Armature Actuated Brakes are spring-set, electrically released, friction devices, which develop holding and braking torque in the absence of electrical
GLS Series Global limit switch
GLS Series Global limit switch Features EN 50041 and EN 50047 esigned to IEC electrical standard for world-wide use Forced disconnect Normally Closed contacts conform to IEC 60947-5-1-3 Rugged housing
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
TAC DuraDrive Product Guide Direct Coupled Actuators
TAC DuraDrive Product Guide Direct Coupled Actuators SPRING RETURN TAC DuraDrive Spring-Return Direct Coupled Actuators TAC OFFERS A COMPLETE LINE OF DIRECT COUPLED ACTUATORS FOR ALL YOUR SPRING RETURN
Prewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
9012G Pressure and 9016G Vacuum Switches
Selection Guide 90G and 906G Vacuum Switches Type of installation Control circuits Power circuits Applications Media controlled Type of operation Air, water, hydraulic oils, () gases, steam Fixed differential:
SIGUARD Safety Systems Safety Integrated
/ 3SE2 303 / 3SE2 404 and open type SIGUAR Safety Systems Safety Integrated Application The function of the position switches (limit switches) is to produce electrical signals corresponding to the positions
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
Safety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
MICRO SWITCH Heavy-Duty Limit Switch (Stainless Steel) HDLS LS2 Series
MICRO SWITCH Heavy-Duty Limit Switch (Stainless Steel) HDLS LS2 Series DESCRIPTION When the application requires an industrial grade limit switch where wet, dust, or corrosive environments may be present,
Microswitches MK series
Microswitches MK series Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with
Limit Switches Introduction Technical Reference Product Selection Guide... 17
E47 Precision Switch Compact Prewired Switch LS-Titan Miniature DIN Switch E49 Compact Metal Switch Heavy-Duty Factory Sealed 6P+ Switch.1 Introduction Technical Reference............................................
22AF 40AF AF 150AF 225AF 400AF 800AF
Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug
Multiple Plunger Limit Switch
Multiple Plunger Limit Switch Series Offers igh Sealability and Long Life with Aluminum Die-cast Enclosure Ideal for machine tools and sequential control Switch box has an oil drain Sturdy construction
LR-LX-LK-LW Safety Switches with separate actuator
LR-LX-LK-LW Safety Switches with separate actuator Technopolymer housing, from one to three conduit entries Protection degree IP67 15 contact blocks available 8 stainless steel actuators available Versions
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
Series 1. Series 1 Pressure Switch. Pressure Switches Inc. Quality Pressure Solutions. Pressure Switches 1 G 10 N Key Features.
Model 1A 1C 1G 1Z 1P 1H Inc. Series 1 Series 1 Pressure Switch High, Low, Differential & Vacuum Pressure Switch options available All Anodized Aluminum Construction Multiple s Available UL & cul Approved
Ordering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
Square D General Purpose Relays
Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0 Contents Class 0R plug-in relays bbspecifications....................................................
D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
Enclosed Switch. Ordering Information. Economical, High Utility Enclosed Switch. Model Number Legend D4MC- List of Models
Enclosed Switch Economical, High Utility Enclosed Switch High precision and long life (10,000,000 mechanical operations) through employment of the moving spring used in OMRON Z Basic Switch. Sealed with