Comepi Limit Switches
|
|
|
- Amy Webb
- 5 years ago
- Views:
Transcription
1
2 Comepi Limit Switches Features and specifications Approvals CSA, culus IP rating (IEC and EN OR IEC 536) IP65-67 Operating temperature -25 to 70ºC (low temperature version available -40 to 70ºC) Protection against electrical shocks metal class I, thermoplastic class - II (according to IEC or 536) Rated insulation voltage U 1 According to IEC and EN According to UL 508 and CSA C22-2 nº 14A 500V (degree of pollution 3) (400V for contact types, X12P, X21P, W03P) A 600, Q 600 (A 300, Q 300 for AM & DM series & contact types X12P, X21P, W03P Conventional free air thermal current I th 10A (according to IEC & EN <40 ºC Short-circuit protection, U e<500v a.c. gg (gl) type fuses 10A Rated operational current I e / AC-15 (according to IEC ) AM, AP, BM, BP, CM, DM, DP 24V 50/60 Hz 10A EM 10A 120V 50/60 Hz 6A 6A 400V 50/60 Hz 4A 3A I e / DC-13 (according to IEC ) 24V DC 6A 2.8A 125V DC 0.55A 0.55A 250V DC 0.4A 0.27A Switching frequency (cycles/hr) 3600 Load factor 0.5 Resistance between contacts (mω) 25 Connecting terminals M3.5 2 pozidriv screws with cable clamp (M3 for 3 poles contact types) Connecting capacity (1 or 2 x mm 2 ) ( for 3 poles contacts type) Terminal marking according to IEC Mechanical durability (millions of operations) depends on head/actuator 5 30 million Naming convention for Limit Switches How to understand the product codes A P 1 T 41 Model Width Body Material Connection Head Material Actuator Contacts A 30 mm M metal 1 Pg 13.5 H thermoplastic (BP) values W - slow B 40 mm P thermoplastic 2 1/2 NPT T thermoplastic (DP) Y - slow C 60 mm 3 Pg 11 T thermoplastic (AM, DM) X - slow D 50 mm 4 M16 P thermoplastic (BM, CM) Z - 5 M20 M metal (BM, CM) 11 F metal (AM, DM) E metal (BM) Naming convention for EM Pre-wired Limit Switches 02 2 NC 20 2 NO 12/12P 1NO + 21/21P + 1NC 03/03P 3 NC 30 3 NO How to understand the product codes EM G12 Z U Model Width Actuator Contacts Connection EM1 30mm codes G11 G9999 action A AMP connector EM2 35 mm slow action non-overlapping M M12 connector late make U standard with UL cable 2
3 Non-Metallic & Metallic Limit Switches AM AP Series AM Series 30mm Metal Limit Switches AP Series 30mm Non-Metallic Limit Switches Code Action Contacts Code Action Contacts Contacts X12P X21P 1NO + + 1NC X12P X21P Certifications CSA, culus CSA, culus 1NO + + 1NC Material Body Heavy duty aluminum alloy UL-V0 thermoplastic fiberglass Head Metal (F) or UL-V0 thermoplastic fibreglass (T) UL-V0 thermoplastic fibreglass (H) Cable Entry or Type of Connection Pg11, Pg13.5, 1/2" NPT, M16 or M20 Pre-wired versions available contact ITC Pg11, Pg13.5, 1/2" NPT, M16 or M20 Pre-wired versions available contact ITC IP Rating IP66 IP65 Body (WxD) mm 30.3 x x 30 In 1.19 x x 1.18 Actuators Types 39 options in actuators, see pages 7, 8 & 9 39 options in actuators, see pages 7, 8 & 9 BBM Break Before Make, MBB Make Before Break, otherwise simultaneous 3
4 BM BP Series BM Series 40mm Metal Limit Switches BP Series 40mm Non-Metallic Limit Switches Code Action Contacts Code Action Contacts Contacts X12 X21 W03 W30 1NO + + 1NC 3NC 3NO X12 X21 W03 W30 Certifications CSA, culus CSA, culus 1NO + + 1NC 3NC 3N0 Material Body Heavy duty aluminum alloy UL-V0 thermoplastic fibreglass Head Metal? (F) or UL-V0 thermoplastic fibreglass (T) UL-V0 thermoplastic fibreglass (T) Cable Entry or Type of Connection Pg13.5, 1/2" NPT or M20 Pre-wired versions available contact ITC Pg13.5, 1/2" NPT, or M20 Pre-wired versions available contact ITC IP Rating IP66 IP65 Body (WxD) mm 40 x x 40.5 in 1.57 x x 1.59 Actuators Types 49 options in actuators, see pages 10 & options in actuators, see pages 10 & 11 BBM Break Before Make, MBB Make Before Break, otherwise simultaneous 4
5 DM DP Series DM Series 50mm Metal Limit Switches DP Series 50mm Non-Metallic Limit Switches Code Action Contacts Code Action Contacts Contacts X12P X21P W03P 1NO + + 1NC 3NC X12P X21P W03P 1NO + + 1NC 3NC Certifications CSA, culus CSA, culus Material Body Heavy duty aluminum alloy UL-V0 thermoplastic fibreglass Head Metal (F) or UL-V0 thermoplastic fibreglass (T) UL-V0 thermoplastic fibreglass (T) Cable Entry or Type of Connection Pg11, Pg13.5, 1/2" NPT, M16 or M20 Pg11, Pg13.5, 1/2" NPT, M16 or M20 IP Rating IP66 IP65 Body (WxD) mm 59 x x 33 Body (WxD) in 2.32 x x options in actuators, see pages 7, 8 & 9 36 options in actuators, see pages 7, 8 & 9 BBM Break Before Make, MBB Make Before Break, otherwise simultaneous 5
6 CM EM Series CM Series 60mm Metal Limit Switches EM Pre-wired Limit Switches Code Action Contacts Code Action Contacts Contacts X12P X21P W03P W30 slow simultaneous simultaneous l 1NO + + 1NC 3NC 3NO Certifications CSA, culus culus slow Material Body Heavy duty aluminum alloy UL-V0 thermoplastic fibreglass Head Metal (F) or UL-V0 thermoplastic fibreglass (T) UL-V0 thermoplastic fibreglass Cable Entry or Type of Connection Pg13.5, 1/2" NPT or M20 PVC UL cable - 5 x 0.75mm 2 ; length 1m, M12 connector or AMP connector IP Rating IP66 IP67 Body (WxD) mm 66 x 43 EM1 30 x 16, EM2 35 x 16 Body (WxD) in 2.6 x 1.69 EM x 0.63, EM x 0.63 Actuators Types 49 options in actuators, see pages 10 & options in actuators, see pages 7, 8 & 9 BBM Break Before Make, MBB Make Before Break, otherwise simultaneous 6
7 Actuators for AM, AP, DM & DP Series This table shows the various actuators that can be used with AM, AP, DM, DP and EM limit switches. Series Actuator AM AP DM DP EM Plain plunger T10 nylon plunger F11/G11/T11 metal plunger F11 T10 T11 F11 T10 T11 G11 Roller plunger F12/G12/T12 metal roller G13/T13 nylon roller F12 T12 T13 F12 T12 T13 G13 Cross roller plunger (90º) G14 metal roller G15 nylon roller G14 G15 T14 - Plunger with dust protection cap T14 T14 T14 T14 G17 Metal roller plunger with dust protection cap G17 G18 Bevel plunger G18 Plain plunger with fixing nuts T21 M18x1 fixing nut G21/T2101 M12x1 fixing nuts T21 T2101 T21 T2101 T21 T2101 T21 T2101 G21 Roller plunger with fixing nuts G22 metal roller G23 nylon roller Cross roller plunger with fixing nuts (90º) G24 metal roller G25 nylon roller G22 G23 G24 G25 Roller lever on plunger horizontal G31/T30 plastic plunger T31 metal plunger T30 T31 T30 T31 T30 T31 T30 T31 G30 Roller lever on plunger vertical T32 metal plunger T34 plastic plunger T32 T34 T32 T34 T35 - Roller lever on plunger with dust protection cap X T35 T35 T35 T36 Roller lever on plunger with dust protection cap X T36 7
8 Series Actuator AM AP DM DP EM Adjustable roller lever on metal plunger G38/T38 no dust cap T39 with dust cap T38 T39 T38 T39 T38 T39 T38 T39 G38 Roller lever G41 Ø 14mm nylon roller G42 Ø 14mm metal roller G43 Ø 14mm ball bearing roller G46/F42/T41 Ø 18mm nylon roller G45/F43/T43 Ø 18mm metal roller T41 T43 T41 T43 F41 F43 T41 T43 G41 G42 G43 G45 G46 Rubber roller lever T42 rubber roller lever F42 rubber roller lever F42 T42 F42 T42 Reverse roller lever F45/T45 nylon roller F46/T46 metal roller F45 F46 T45 T46 F45 F46 T45 T46 T48 - Ceramic rod lever X T48 X Adjustable roller lever G51/F51/T51 nylon roller G53/F53/T53 metal roller F51 F53 T51 T53 F51 F53 T51 T53 G51 G53 G5100/T Adjustable serrated rubber roller lever (step 2mm) T5100 G5100 Adjustable rubber roller lever F52/T52 adjustable rubber roller lever F55/T55 adjustable rubber roller lever F52 F55 T52 T55 F55 T52 T55 Adjustable toothed rubber roller lever T5200 Adjustable lever T5500 Adjustable serrated lever (step 2mm) T5200 T5500 G61/F61/T61 nylon actuator with stainless steel spring F61 T61 F61 T61 G61 T62 - Spring actuator T62 T62 Ø 3mm rod lever F71/G71/T71 stainless steel rod F72/G72/T72 fibreglass rod F75/G75/T75 square steel rod 3x3mm F71 F72 F75 T71 T72 T75 F71 F72 F75 T71 T72 T75 G71 G72 G73 8
9 Ø 6mm rod lever F73/T73 nylon rod G73 nylon rod (max 204) F74/T74 fibreglass rod G74 nylon rod (max 204) Series Actuator AM AP DM DP EM F73 F74 T73 F73 F74 T73 T74 G73 G74 T91 - Multidirectional spring actuator T91 T91 T91 T91 Multidirectional spring actuator nylon T92 length 115 Ø 6.2 G92 length 122 Ø 7 Multidirectional spring actuator T93 length 117 G93 length 124 T92 T92 T92 T92 G92 T93 T93 T93 G93 T98 - Pull actuator with ring T98 T98 T98 T98 Head Material: H / P=Thermoplastic; E= AL; M=ZAMAK ITC also carries a full line of Safety Switches from Comepi. 9
10 Actuators for BM, BP & CM Series This table shows the various actuators that can be used with BM, BP and CM limit switches. Plain plunger E11 - Stainless steel H11/P11 Metal Series Actuator BM BP CM E11 P11 H11 E12 Stainless steel ball plunger H12 Metal ball plunger E12 H12 E12 E13/H13/M13 Stainless steel Ø 12mm roller plunger E13 M13 H13 M13 H14/M14 - Plain metal plunger with dust protection cap M14 H14 M14 H19/M19 - Metal roller plunger with dust protection cap M19 H19 M19 E21 stainless steel lateral plain plunger E21 E21 E22 Stainless steel lateral plunger with Ø 12mm vertical roller E22 E22 E23 Stainless steel lateral plunger with Ø 12mm horizontal roller E23 E23 One way lever - Ø 22mm roller H31 nylon roller H32 stainless steel roller H33 stainless steel roller with metal ball bearing One way lever with dust protection cap - Ø 22mm roller H35 nylon roller H36 stainless steel roller H37 stainless steel roller with metal ball bearing Ø 22mm Roller lever H41/M41 nylon roller H42/M42 stainless steel roller H43/M42 stainless steel roller with metal ball bearing Roller lever Ø 22mm E41/H41 nylon roller E42/H42 Stainless steel roller E43/H43 Stainless steel roller with metal ball bearing M41 M42 M43 E41 E42 E43 H31 H32 H33 H35 H36 H37 H41 H42 H43 H41 H42 H43 E31 E32 E33 M41 M42 M43 E41 E42 E43 10
11 Series Actuator BM BP CM E44/H44/M44 - Ø 50mm Rubber roller lever E44 H44 E44 M44 Adjustable Ø 22mm roller lever E51/H51/M51 nylon roller E52/H52/M52 stainless steel roller E53/H53/M53 stainless steel roller with metal ball bearing E51 E52 E53 M51 M52 M53 H51 H52 H53 M51 M52 M53 E54/H54/M54 - Adjustable Ø 50mm rubber roller lever E54 M54 H54 M54 E61/H61/M61 - Nylon actuator with stainless steel spring actuator E61 M61 H61 E61 M61 E62/H62/M62 - Stainless steel spring actuator E62 M62 H62 M62 Ø 3mm adjustable rod lever E71/H71/M71 stainless steel rod E73/H73/M73 fibreglass rod E75/H75/M75 square metal rod 3x3 E71 E73 E75 M71 M73 M75 H71 H73 H75 E71 E73 E75 M71 M73 M75 Ø 6mm adjustable rod lever E72/H72/M72 nylon rod E74/H74/M74 fibreglass rod E72 E74 M72 M74 H72 H74 E72 E73 M72 M74 E91/H91 - Multidirectional actuator with stainless steel spring E91 H91 E91 E92/H92/P92 - Multidirectional spring actuator nylon E92 P92 H92 E92 E93/H93 Stainless steel spring multidirectional actuator E93 H93 E93 E99 - Pull action with ring E99 E99 Head Material: H / P=Thermoplastic; E= AL; M=ZAMAK 11
12
Limit Switch - Prewired Type Metal Body
Limit Switch - Prewired Type Metal Body Sealed with epoxy resin al the base of the box Degree of protection IP67 Thermoplastic material or diecast zinc alloy body Positive Opening Operation Minimum Actuation
Metal limit switches are made of zinc alloy and have a degree of protection of IP67 and NEMA Type 4, 4X.
Limit switches pre-wired 3mm & 35mm Metal & plastic casings Limit switches Description Plastic are made of reinforced UL-VO thermoplastic fiberglass, offering double insulation and protection
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
Limit Switches - Limit Type (PS31L) Plastic Body IP65
Limit Switches - Limit Type (PSL) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
DP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
Limit switches. Metal. Limit Switches Metal casing, 30mm, 40mm & 60mm
Limit Switches casing, 3mm, 4mm & 6mm Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 3 dimensions: LS3M, 3mm width. LS4M, 4mm width.
Limit Switches - Limit Type (PS21L) Metal Body IP66
Limit Switches - Limit Type (PS21L) Metal Body IP66 High mechanical resistance Degree of protection IP66 Zinc alloy (Zamack) or aluminium body Positive Opening Operation Minimum Actuation Force/Torque
Limit Switches - Limit Type Plastic Body IP65
Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum
Limit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
Limit Switches - Limit Type (PS42L) Plastic Body IP65
Limit Switches - Limit Type (PS42L) Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque
Miniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
FOOT SWITCHES
- 83 - FOOT SWITCHES PS... / PD... Foot Switches Double insulation - Plastic Casing IP65 Description Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers,
LS Series Limit Switches. Short Form Catalogue AC1300 ABB
Short Form Catalogue LS Series Limit Switches AC ABB LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic
Gross Automation (877)
Limit Switches Carlo Gavazzi broadens its leading range of products for the industrial automation world, with the new and complete range of mechanical limit and safety switches. These robust switches provide
Actuartors available. CZE Limit Switch. Direct movement. Angular movement. Multi-directional movement A/S1. Steel plunger
CZE Limit Switch ctuartors available Direct movement /S1 Steel plunger Steel plunger with ruber gasket B Steel roller plunger C C/S1 D D/S1 R Thermoplastic roller lever, side actuation lever, with rubber
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B 3 H G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
Safety Limit Switches
Safety Limit Switches with separate actuator Z02: Snap action 2NC Y+Y 3 Bent key 4 Flat key 5 Bent key 6 Flat key 7 Shock absorbing bent key 8 Shock absorbing flat key 9 Adjustable joint key Z11: Snap
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
Pre wired limit switches
Pre wired limit switches Selection diagram Actuators A B B 9 BL Thermoplastic Bodies E7 I s NO+NC snap action NO+NC slow action Cable entry 4 or 5 pole PVC sheath cable (standard) M connector AMP connector
Double insulated, types XCK-P and XCK-T. With head for linear movement (plunger) operators
Double insulated, types XCK-P and XCK-T Presentation XCK-P with 1 cable entry, conforming to CENELEC EN 57 With head for linear movement (plunger) operators Page 18 With head for rotary movement (lever)
Limit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
IEC Limit Switches Selection Guide
IEC Limit Switches Selection Guide Limit Switches Selection Guide ABM Series ABP Series AAP Series Series ABM Series ABP Series AAP Series Prices start at Description Heavy duty IEC Double-insulated,
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E0 I E20 I E40 I Contact blocks (standard) M20 ½ NPT 00 NO+NC snap action 0 NO+NC slow action 02 NO+NC slow action with
Compact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
ED SERIES SAFETY LIMIT SWITCH Description
Description The ED series safety limit switches conform to EN 50047 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
Limit switches. 6 Thermoplastic roller lever 1 direction of actuation SEN TRONIC AG. Presentation
Presentation Variable composition Spring-rod lever with thermoplastic end () Spring-rod lever, metal () Variable length thermoplastic roller lever () Round rod lever, thermoplastic, Ø mm L = mm () ZCK
ED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
Limit Switches Metal casing, 40mm & 60mm Assembled Components
Limit Switches Metal casing, & mm Assembled Components Metal Description are made of aluminum alloy and have a degree of protection of IP 66 and UL type 4X. The casings come in 2 dimensions: LS4M, width.
Selection diagram. Actuators. Bodies. Contact blocks. Cable entry AB BB CB. Thermoplastic
Safety switches Selection diagram Actuators AB BB CB TB S5 SC Thermoplastic Bodies E0 I E20 I E0 I Contact blocks 0 NO+NC slow action 0 2NC slow action 08 2NC slow action (for pull-wire switches) Pg 3,5
L S T E 4 1 L S A 4 0 X 5 4
Bodies with contact block for rectilinear or angular motion heads L S 4 5 M 0 0 B 1 1 Limit Switch... LS Casing width: 40 mm... 4 Cable inlet: 1 cable inlet for Pg 13.5 cable gland... 0 1 cable inlet M20
Position switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
Selection diagram. Actuators. Body. Contact blocks. Cable entry A A S1 B B 13. Thermoplastic
Limit switches Selection diagram Actuators A A S B B G L LP LS Thermoplastic Body E I E2 I E4 I Contact blocks (standard) M2 ½ NPT NO+NC snap action NO+NC slow action 2 NO+NC slow action with overlapping
FOOT SWITCHES IN THERMOPLASTIC MATERIAL AND ALUMINIUM DIE CAST PS... / PD... SERIES. Symbols P S / P. Dimensions (in mm)
FOOT SWITCHES IN THERMOPLASTIC MATERIAL AND ALUMINIUM DIE CAST PS... / PD... SERIES Applications Foot switch operated machines such as: shearing machines, spinning machines, spinning lathers, machine tools,
OsiSense. XC Basic Limit Switches XCMN, XCKN, XCNT
OsiSense XC Basic Limit Switches XCMN, XCKN, XCNT Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com - www.stevenengineering.com Courtesy of Steven Engineering, Inc. - () - - sales@steveneng.com
Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
K50H004UP cam changeover switch - 4-pole A - screw mounting
Characteristics cam changeover switch - 4-pole - 60-50 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
XCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
Position switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
K30H001YP cam star-delta switch - 3-pole A - screw mounting
Characteristics cam star-delta switch - 3-pole - 60-32 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
Position Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
YFC. Limit switch. Ex d. 24 operating head types
Ex d YFC Limit switch 24 operating head types - Group IIC - Zone 1, 2, 21, 22 - Aluminium alloy - Easy installation, wiring and maintenance - Durable and safe over time Fastening system Earth screw RAL735
Compact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
PRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
SERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE
SERIES Z/T23 Safety-Rated, Positive-Break Miniature DIN Limit Switches Features & Benefits Positive-Break NC contacts won t stick or weld shut. Watertight design meets IP washdown requirements. Rugged,
Switches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
Safety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
LR-LX-LK-LW Safety Switches with separate actuator
LR-LX-LK-LW Safety Switches with separate actuator Technopolymer housing, from one to three conduit entries Protection degree IP67 15 contact blocks available 8 stainless steel actuators available Versions
D4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
Prewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
Comepi S.r.l. reserves the right to modify its products and to change any details in this pubblication at any time without prior notice.
SAFETY DEVICES Comepi S.r.l. reserves the right to modify its products and to change any details in this pubblication at any time without prior notice. Comepi is not responsable for improper use of their
Single foot switches PX and PA series
Single foot switches PX and PA series Technical data Housing Made of polymer glass-reinforced shock-proof thermoplastic resin with double insulation Bedplate with non-skid rubber feet. Actuation force:
Safety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
Hinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
Limit switches 0 ZCK E67 ZCK E23 ZCK E62. with contact, cable. entry for Pg 13, fi xed, 1 step (2) (3) ZCK JD3p, ZCK J1, J5, J6, J7, J9
Presentation Variable composition: standard bodies Thermoplastic roller lever plunger, 1 direction of actuation Steel roller lever plunger, 1 direction of actuation ZCK E1 ZCK E3 Side metal plunger Side
Proximity Sensors. Photoelectric Sensors IEC. Encoders. Current Sensors. Pressure Sensors and Gauges. Temperature Sensors and Thermometers
Proximity Section 8 In this interactive PDF you can: electric Section 9 IEC Limit Switches Section 0 Encoders Section IEC Use bookmarks to navigate by product category Use bookmarks to save, search, print
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
K50F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-50 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
K63F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-63 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
Single foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
Safety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
Limit switches. Presentation. OsiSense XC Special For hoisting and material handling applications XCR. b XCR
Presentation For hoisting and material handling applications XCR b XCR v With head for rotary movement operators, spring return to off position 1 contact actuation position per direction Page 326/6 v With
Position switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
XB5AD33 SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS
Characteristics SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS Product availability : Stock - Normally stocked in distribution facility Price* : 68.00 USD Main Range of product Product or component type Device
Limit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
HS1E Series Full Size Solenoid Locking Switches
HS1E Series Full Size Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS1E features: Basic unit and solenoid unit in one
Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
Position switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
Prewired position switches FF series
2 Prewired position switches FF series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45 46
Limit switches Osiswitch Classic For hoisting and materials handling applications, type XCR Complete switches with 1 cable entry
References, characteristics For hoisting and materials handling applications, type XCR Complete switches with cable entry Type of head Rotary with spring return to off position Stay put Maximum displacement
XACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional
Position Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
D4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
Manual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
Door Interlock Switches
HSE Series HSE Series Full Size Locking Switches Overview X Series E-Stops HSE features: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal screws
Microswitches MK Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
Safety components. MAC-I limit switches NEW! Features
NEW! Safety components MAC-I limit switches Features The MAC-I limit switches are developed and manufactured according to the rules set out in IEC international publications and EN European standards.
HS1B Series Full Size Interlock Switch. GS-ET-15 BG standard in Germany. Part Number Key
HSB Series Full Size Interlock Switch HSB features: Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available
Selection diagram. Actuators. Bodies. Contact blocks. Cable entry AB BB CB. Thermoplastic
Safety switches Selection diagram Actuators AB BB CB TB S5 SC Thermoplastic Bodies E I E2 I E4 I Contact blocks NO+NC slow action 4 8 (for pull-wire switches) (standard) M2 ½ NPT safety switches DB EB
Locking Style mm AUTOCAD, STEP, IGES & PDF. Kits Actuator Type Interlock Kit Model * Contact(s) SI-LS42DMSG SI-LS42WMSG
Locking Style Spring or Solenoid Locking Two locking mechanisms are available: spring lock with energized solenoid release and energized solenoid lock with spring release. Rigid and flexible in-line actuators
Microswitches MK series
D Microswitches MK series Introduction Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica (cross-reference at page
XACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Complementary Control station colour Connections - terminals Mechanical durability Cable entry Contact code designation [Ithe] conventional
AE 9... AE 40 Contactors NE... Contactor Relays
Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal
NSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals
NSL..S 4-pole / 8-pole Contactor Relays - Spring DC Operated Description - 1-stack contactor relays: 4-pole, - 2-stack contactor relays: 8-pole, - Mechanically linked contact elements available, - Low
HS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded
HS5D Miniature Interlock Switches
HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance Clearwater Tech - Phone: 8094.04 - Fax: 8.368.04 - Web: www.clrwtr.com - Email: info@clrwtr.com New Generation Miniature
Limit switches. Presentation. OsiSense XC Special For hoisting and material handling applications, type XCR. b XCR
Presentation type XCR b XCR v With head for rotary movement operators, spring return to off position contact actuation position per direction Page / v With head for rotary movement operators, stay put
F E - Electromagnetic Safety Switch With Separated Actuator. 1 Code Construction. Casing: P: Plastic casing
Electromagnetic Safety Switch With Separated 1 Code Construction F E - Casing: P: Plastic casing Cable inlet: 5: 3 x (M20x1) Type of FEP: E: Electrical block ( b with excited ) M: Mechanical block ( b
XCKP2145P16 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16
Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - M16 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 47.90 USD Main Range
XACA871 pendant control station XAC-A - 8 pushbuttons
Characteristics pendant control station XAC-A - 8 pushbuttons Main Range of product Product or component type Device short name Complementary Control station type Enclosure material Electrical circuit
D4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
Components for safety applications
Presentation CS-P with 1 cable entry With rotary operating head, with elbowed lever (flush with rear of switch) straight lever, f hinged covers and guards Pages /4, /4, /44 CS-PR with 1 cable entry With
Rotary limit switches FCR FGR series
Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches. 0 Rotary limit switches FCR