Locking Style mm AUTOCAD, STEP, IGES & PDF. Kits Actuator Type Interlock Kit Model * Contact(s) SI-LS42DMSG SI-LS42WMSG

Transcription

1 Locking Style Spring or Solenoid Locking Two locking mechanisms are available: spring lock with energized solenoid release and energized solenoid lock with spring release. Rigid and flexible in-line actuators are available. head can be rotated in 9º increments to eight possible actuator positions: four vertical and four horizontal. Two models are available, based on voltage. Design meets positive opening requirements for safety interlocks (IEC ). Insulated device on all models with plastic housing (IEC ). Protective earth terminals on all metal models (IEC ). Inspection Systems Controllers & Two-Hand Control Interlock SI-LS42 Locking Style ACCESSORIES online AUTOCAD, STEP, IGES & PDF SI-LS42 Models (shown with rigid in-line actuator) Replacement actuators for safety interlock switches ( 597) SI-LS42, 42 - Spring Lock and Solenoid Unlock Kits Type Interlock Kit Model * Contact(s) Solenoid Voltage Contact Config. & Switch Diagram SI-LS42DSG SI-LS42WSG SI-LS42DMSG SI-LS42WMSG : SI-LS42DSG SI-LS42DMSGF : SD23 SI-LS42WSG SI-LS42WMSGF More on next Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)

2 SI-LS42, 42 - Spring Lock and Solenoid Unlock Kits Type Interlock Kit Model * Contact(s) (cont d) Solenoid Voltage Contact Config. & Switch Diagram MACHINE SAFETY SI-LS42DSH SI-LS42WSH SI-LS42DMSH SI-LS42WMSH : 2 NC SI-LS42DSH SI-LS42DMSHF : SI-LS42WSH SI-LS42WMSHF SD24 ACCESSORIES 597 SI-LS42DSI SI-LS42WSI SI-LS42DMSI SI-LS42WMSI : 2 NC & 1 NO SI-LS42DSI SI-LS42DMSIF Contact: SD25 SI-LS42WSI SI-LS42WMSIF SI-LS42DSJ SI-LS42DSJ SI-LS42DMSJ SI-LS42DMSJF : 3 NC Contact: SD26 Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)

3 SI-LS42, 42 - Solenoid Lock and Spring Unlock Kits Type Interlock Kit Model * SI-LS42DMG SI-LS42WMG SI-LS42DMMG SI-LS42WMMG Contact(s) : Solenoid Voltage SI-LS42DMG SI-LS42DMMGF : SI-LS42WMG SI-LS42DMH SI-LS42WMH SI-LS42WMMGF SI-LS42DMMH SI-LS42WMMH : 2 NC SI-LS42DMH SI-LS42DMMHF : Contact Config. & Switch Diagram SD23 SD24 Inspection Systems Controllers & Two-Hand Control Interlock ACCESSORIES 597 SI-LS42WMH SI-LS42DMI SI-LS42WMI SI-LS42WMMHF SI-LS42DMMI SI-LS42WMMI : 2 NC & 1 NO SI-LS42DMI SI-LS42DMMIF Contact: SD25 SI-LS42WMI SI-LS42WMMIF SI-LS42DMJ SI-LS42DMJ SI-LS42DMMJ SI-LS42DMMJF : 3 NC Contact: SD26 Multi-Directional NC = Normally Contact, NO = Normally Contact * A kit contains an interlock and actuator. Individual interlocks (without actuator) are for replacement purposes only. Contact factory for integral quick-disconnect (QD) and pigtail QD options. Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)

4 Locking Style Specifications Contact Rating 25V ac max. 2.5 kv max. transient tolerance NEMA A3 P3 European Rating Utilization categories: AC15 and DC13 (IEC ) with 1 & 2 contact pairs: U i = 25V ac SI-LS42 models: I th = 2.5 A SI-QM1 models: I th = 1 A Contact Material Solenoid Power Consumption Maximum Speed Mechanical Life Minimum Engagement Radius Actuation Extraction Force Short Circuit Protection Silver-nickel alloy SI-LS42 models: 1.1 VA / Inrush VA (.2 sec) SI-QM1 models: 5.2 W 1.5 m/second 1 million operations Rigid actuator: 4 Flexible actuator: 15 SI-LS42 models: 2 N when locked SI-QM1 models: 1 N when locked 6 amp Slow Blow, 1 amp Fast Blow. Recoended external fusing or overload protection. 4-6 Hz U e V I e /AC-15 A I e /DC-13 A Inspection Systems Controllers & Two-Hand Control Interlock Wire Connections SI-LS42 models: 1 cage clamp elements 1.5 stranded max. / 16 AWG Cable Entry Construction Environmental Rating Operating Conditions Weight Application Notes Certifications SI-QM1 models: Screw terminals with pressure plates accept the following wire sizes 16 AWG (1.5 2 ) max. solid; 14 AWG (2.5 2 ) max. stranded, 18 AWG (1 2 ) when using all terminals M2 x 1.5 threaded entrance Adapter supplied to convert M2 x 1.5 to ½" - 14 NPT threaded entrance SI-LS42 models: Glass fiber-reinforced polyamide thermoplastic housing; UL 94-V rating SI-QM1 models: Aluminum die cast IP67 Temperature: SI-LS42 models: -3 to 7 C SI-QM1 models: -3 to 6 C SI-LS42 models:.3 kg SI-QM1 models:.81 kg When rotating the actuator head, the actuator MUST BE FULLY ENGAGED. When using a model with solenoid locking, the lock mechanism will disengage upon solenoid power failure. and s SI-LS42 models: SD23, SD24, SD25 & SD26 (pp ) SI-QM1 models: SD27 and SD28 (p. 596) Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)

5 Contact/s SD19 - SI-LM4MKHE Series SD2 - SI-LM4MKHF Series Inspection Removed Controllers & Two-Hand Control * 1 of movement will open contact Interlock Systems SD - SI-LM4MKVE Series 15 SD - SI-LM4MKVD Series 4 1* 3 - Removed Removed 38 Removed SD23 - SI-LS42..MSG/MMG Series 14 Removed & Unlocked Removed & Unlocked - 13 & Locked SD24 - SI-LS42..MSH/MMH Series & Locked 38 More on next Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)

6 Contact/s SD25 - SI-LS42..MSI/MMI Series SD26 - SI-LS42..MSJ/MMJ Series MACHINE SAFETY & Locked 42 Removed & Unlocked & Locked 42 Removed & Unlocked SD27 - SI-QM1..MSG/MMG Series SD28 - SI-QM1..DMSH Series & Locked & Locked 1 () 1 (.39) (.) (.47) Removed & Unlocked Removed & Unlocked (1.61) (in) Page 59 Page 59 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA Main Office: (65) Outside Local Area: (8)