Rotary limit switches FCR FGR series

Transcription

1 Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches.

2 0 Rotary limit switches FCR series for control circuits IP GENERL CHRCTERISTICS ELECTRICL CHRCTERISTICS Self extinguishing thermoplastic housing VO UL9 IP protection rating according to IEC/EN 09 mbient temperature: operating - + C storage C Material class II, Pollution class according to IEC/EN09 Slow break positive opening double gap contacts No. cable entry, Ø Comply with IEC/EN09-, UL0 Certifications IMQ, CCC, GOST, UL Rated insulation voltage Ui Rated impulse withstand voltage Uimp Rated thermal current Ith Frequency Rated operating current: C - C C -phase -pole Rated short circuit withstand current (gg 0- V kv Hz 90V 0V /kw 00V /kw 90V fuses) k 90 0/0 / /, DESCRIPTION For single-speed motor control -position FCR00 -position FCR00 -position rotary FCR00 -position rotary FCR00 -position rotary -position FCR00 For two-speed motor control WIRING DIGRM No FCR00 00 WIRING DIGRM WIRING DIGRM WIRING DIGRM WITH MECHNICL INTERLOCK WITH MECHNICL INTERLOCK 00 Ø.. 9 Ø SINGLE-SPEED WIRING DIGRM WIRING DIGRM WIRING DIGRM SINGLE-SPEED WITH MECHNICL INTERLOCK TWO-SPEED

3 Rotary gear limit switches FGR series for control circuits IP GENERL CHRCTERISTICS This range is aimed at the control of rotating parts: crane rope drums, machinery, etc. They are supplied with a micro,adjustable by a tool, to set the contacts to open and close independent from one another according to the different requirements. The FGR..B version is supplied with a coaxial shaft to use an encoder. Die cast main body with self extinguishing thermoplastic cover VO IP protection rating according to IEC/EN 09 Galvanised steel worm gear with ball bearings P control cams with central stainless steel shaft mounted on ball bearings Cams and micrometric adjustment screws in P Maximum number of operating contacts ( cams) No. cable entries with M0 cable glands Operating temperature - C + 0 C ELECTRICL CHRCTERISTICS Comply with IEC/EN 0-, UL 0 Certifications IMQ, CCC, GOST, UL Recognized NC+NO changeover switches (C form) Snap action contacts with positive opening NC contact Self cleaning silver alloy contacts Rated insulation voltage Ui 0V Rated thermal current Rated operating current: resistive load Ie -0V ac inductive load Ie -0V ac IEC/EN 0- ()-0V ac, UL 0-0Vac STNDRD VERSION CM/MOTORSHFT REV RTIO With micro switches With micro switches WEIGHT gr MIN. PCK QTY. / / /0 /00 /00 FGR00 FGR00 FGR00 FGR009 FGR00 FGR00 FGR00 FGR00 FGR009 FGR COXIL SHFT VERSION CM/MOTORSHFT REV RTIO With micro switches With micro switches WEIGHT gr MIN. PCK QTY. / / /0 /00 /00 FGR00B FGR00B FGR00B FGR009B FGR00B FGR00B FGR00B FGR00B FGR009B FGR00B

4 Rotary gear limit switches FGR series for control circuits IP TRIP DIMENSIONS The trip refer to the action of the cam on contact - (NC) of the micro-switches B C D E F CM No. CM No. CM No. CM No. CM No. CM No. Contacts: Open Close NOTE: all micro-switches have changeover contacts a b c d e f - Flange fixing version - Twin shaft version RPM revs revs 0 revs 00 revs 00 revs,, 0 0 a 0, 9, 90 0 B, REVOLUTIONS REFERRED TO THE CMS CTIVTION b C c D d E e 9, 0 0 0, 0, 0 0,, ,, 0 00,, 0 00 F, f, CCESSORIES The FLG flange in P, the Oldham coupling in PC reinforced with GF can be used on the main shaft.

5 programmable control systems safety remote controls rotary limit switches control pendants cabled controls general purpose radio controls foot switches PO BOX BRENDLE QLD 00 USTRLI (t) (f) (e) support@industryiq.com.au (w)