ELECTRA-flo G5 TRANSMITTER (Version 2.4) THERMAL AIRFLOW MEASURING SYSTEM
|
|
|
- Valentine Daniels
- 5 years ago
- Views:
Transcription
1 ELECTRA-flo G5 TRANSITTER (Version 2.4) THERAL FLOW EASURING SYSTE SUBITTAL SHEET STANDARD CONSTRUCTION ximum Number of Sensors: Disply: Configurtion Access: Power Supply: Power Consumption: Outputs: Anlog Output Scling: Anlog Output Resolution: Anlog Output Filtering: Network Output Communiction: Humidity Limits: Temperture Limits: Electricl Connections: Enclosure: Approvls: 32 per probe rry or mesuring sttion. Bcklit, 1/4 VGA (320 x 240), color TFT LCD. 2.75" x 2.0" disply size. Field progrmmble, menu driven user interfce ccessed vi four button keypd. Field selectble in U.S. or S.I. units for velocity / flow nd temperture. Pssword protected. 24VAC (20-28VAC) or 24VDC (20-40VDC), isolted nd fused with reverse polrity protection. 16 to 90VA, bsed on the quntity (1 to 32) of sensors in the probe rry or sttion. Dul nlog outputs, field selectble vi menu for 0-5VDC, 0-10VDC, or 4-20mA. Single lrm output, field progrmmble. Field progrmmble nlog output scling of irflow velocity nd temperture. Velocity rnge for ducted pplictions: 0 to 4000 FP for ELECTRA-flo/C; 0 to 5000 FP for Probe Arrys. Temperture rnge: 0 to 140 F. 0.02% Field progrmmble over 10:1 rnge. BACnet or odbus. 0 to 99% RH, non-condensing. -20 F to 180 F Storge; -20 F to 140 F Operting. Terminl strips with plug-in connectors for field wiring. Probe to trnsmitter connection vi shielded plenum rted cble with mini-din Snp & Lock connector. NEA 1 luminum with hinged cover. UL pending; BTL pending; FCC Prt 15 Subprt B, Clss A Device. DIENSIONAL INFORATION ELECTRA-flo Therml Airflow Trnsmitter LCD DISPLAY EBRANE KEYPAD TERINALS (Locted Inside Enclosure) 7.87" 7.40" 6.93" FLOW EASUREENT SOLUTIONS HINGED COVER Ø.188 OUNTING SLOTS FIELD POWER ACCESS 2.26" ON/OFF SWITCH 3.50" 4.93" ANALOG OUTPUT/ NETWORK ACCESS PROBE CABLE CONNECTORS FRONT VIEW BOTTO VIEW Snt Ros, CA (707) (707) Fx FLOW EASUREENT SOLUTIONS Rev. 0 (1/17)
2 FLOW EASUREENT SOLUTIONS ELECTRA-flo PROBE & G5 TRANSITTER CONSTRUCTION OPTIONS THERAL FLOW EASURING SYSTE SUBITTAL SHEET Probe q Stndrd - Type 6063 Anodized Extruded Aluminum q Type 316 Stinless Steel Probe Connection Box q Stndrd - Aluminum, NEA 1 q Polycrbonte, NEA 4X q Stinless Steel, NEA 4X Trnsmitter Enclosure q Stndrd - Aluminum, NEA 1 q Fiberglss, NEA 4X, with Cler Lid q Stinless Steel, NEA 4X q Stinless Steel, NEA 4X, with Window Trnsmitter Cble q Stndrd - 10' q 25' q 50' q 100' Cble Connections q Stndrd - Cble with mini-din Connectors q Liquid Tight Cordgrips q Liquid Tight Flexible Conduit Fittings Network Communictions q BACnet q odbus Trnsmitter ounting q Stndrd - Remote q On ELECTRA-flo Sttion G5 TRANSITTER ENCLOSURE OPTIONS 8.50" 8.28" ELECTRA-flo Therml Airflow Trnsmitter 6.41" 4.29" 10.50" ONI TOR 1/2" CONDUIT SEALS 10.28" BOTTO VIEW 1/2" CONDUIT SEALS BOTTO VIEW FRONT VIEW LIQUID TIGHT CORDGRIPS (SHOWN) OR LIQUID TIGHT FLEXIBLE CONDUIT FITTINGS FRONT VIEW LIQUID TIGHT CORDGRIPS (SHOWN) OR LIQUID TIGHT FLEXIBLE CONDUIT FITTINGS NEA 4X - FIBERGLASS NEA 4X - STAINLESS STEEL PROBE CONNECTION BOX OPTIONS 5.75" 3.63" Ø1.125" PROBE, ALU OR SST 5.75" 3.66" Ø1.125" PROBE, ALU OR SST 4.00" 4.00" PLENU RATED PROBE CONNECTION CABLE TO TRANSITTER LIQUID TIGHT CORDGRIP (SHOWN) OR LIQUID TIGHT FLEXIBLE CONDUIT FITTING PLENU RATED PROBE CONNECTION CABLE TO TRANSITTER LIQUID TIGHT FLEXIBLE CONDUIT FITTING (SHOWN) OR LIQUID TIGHT CORDGRIP NEA 4X - POLYCARBONATE Snt Ros, CA (707) (707) Fx NEA 4X - STAINLESS STEEL FLOW EASUREENT SOLUTIONS Rev. 2 (1/17)
3 EXTENDED CASING ELECTRA-flo STATION WITH THIRD-PARTY OPPOSED BLADE DAPER THERAL FLOW EASURING SYSTE SUBITTAL SHEET STANDARD CONSTRUCTION Csing: Flnges: Probe: Sensor Housing: Sensor Type: Sensor Signl Processing: Probe ounting: Probe to Probe Connection: Sttion to Trnsmitter Connection: Sensor Density: Dmper: 14 g. glvnized sheet metl, intermittently welded, seled with metl culking. 1-1/2" wide, 90 formed flnges. Type 6063 nodized extruded luminum. 1-1/8" dimeter. Injection molded polycrbonte. Hermeticlly seled, precision mtched thermistors with lser trimmed resistive heting element mounted in flow conditioning perture. icroprocessor with 12 bit A/D conversion for ech sensor node. Externlly mounted vi 4" x 4" luminum plte, with closed cell neoprene gsket. Integrl plenum rted cble with mini-din Snp & Lock connector for signl nd power. ultiple probe rry connect serilly in disy chined configurtion. Integrl plenum rted cble with mini-din Snp & Lock connector. Stndrd length 10'. ELECTRA-flo Probe Arry Level 1, Level 2 or Level 3. See dmper mnufcturer's submittl sheet for construction nd performnce informtion. PERFORANCE SPECIFICATIONS Individul Sensor Accurcy: Sensor Temperture Accurcy: Qty. Clibrtion Points per Sensor: Velocity Clibrtion Rnge: Operting Temperture: Operting Humidity: ±2% of reding ±0.1 F 6 0 to 5000 FP -20 F to 140 F 0 to 99% RH, non-condensing OPTIONAL CONSTRUCTION q Probes mounted on the long side. q Dmper shft on the long side. q q Engrved identifiction tg. Fctory mounted trnsmitter. Sensor Density: q Level 1 q Level 2 q Level 3 Sttion to Trnsmitter Cble Length: q 25' q 50' q 100' DIENSIONAL SPECIFICATIONS LONG DIENSION 24.00" 24.00" - D D SHORT DIENSION FLANGE INLET VIEW (DAPER BLADES NOT SHOWN) Snt Ros, CA (707) (707) Fx SIDE VIEW THIRD PARTY DAPER FLOW EASUREENT SOLUTIONS Rev. 0 (1/17)
4 ELECTRA-flo Probe Arry - Level 1 ELECTRA-flo/ Sttion - Level 1 ELECTRA-flo/C Sttion- Level 2 SUBITTAL SHEET INIU INSTALLATION REQUIREENTS INSTALLATION CONSIDERATIONS. Instlltion fctors to be considered when pplying the ELECTRA-flo Probe Arry-Level 1, ELECTRAflo/ Sttion-Level 1 or ELECTRA-flo/C Sttion-Level 2 re s follows: Turbulent Airflow. The distnce between the irflow disturbnce (i.e., fittings, trnsitions, etc.) nd the instlled loction, s shown below, is the minimum requirement for instlltion to ssure ccurte irflow mesurement. Wherever possible, the ELECTRA-flo Probe Arry-Level 1, ELECTRA-flo/ Sttion-Level 1 or ELECTRA-flo/C Sttion-Level 2 should be instlled with longer runs of stright duct (or clernces) thn shown. Airborne Contminnts. The levels of ir filtrtion nd clenliness ssocited with commercil HVAC Systems, whether supply/return/exhust ir, re stisfctory for opertion of the ELECTRA-flo Probe Arry-Level 1, ELECTRA-flo/ Sttion-Level 1 or ELECTRA-flo/C Sttion-Level 2. Applictions contining irborne contminnts my require periodic mnul clening using compressed ir nd/or physicl clening. Direction of Airflow. To prevent improper instlltion, ech ELECTRA-flo Probe Arry-Level 1, ELECTRA-flo/ Sttion-Level 1 or ELECTRA-flo/C Sttion-Level 2 is mrked with n rrow indicting the required direction of irflow. 3X FAN DISCHARGE FAN INLET DISCHARGE INLET UNVANED VANED SWEEP PLENU TAKEOFF BRANCH DUCT REDUCING TRANSITION EXPANDING TRANSITION DAPERS BELLOUTH INLETS NOTE: 'X' Distnces re to leding or triling edges for STATIONS (shown), or to centerline for PROBES. Equivlent Duct Dimeter X Rectngulr Duct: X = 2(HxW) H+W Circulr Duct: X = Duct Dimeter Snt Ros, CA (707) (707) Fx FLOW EASUREENT SOLUTIONS Rev.0 (1/17) &
5 ELECTRA-flo Probe Arry - Level 2 ELECTRA-flo/ Sttion - Level 2 ELECTRA-flo/C Sttion - Level 3 SUBITTAL SHEET INIU INSTALLATION REQUIREENTS INSTALLATION CONSIDERATIONS. Instlltion fctors to be considered when pplying the ELECTRA-flo Probe Arry-Level 2, ELECTRAflo/ Sttion-Level 2 or ELECTRA-flo/C Sttion-Level 3 re s follows: Turbulent Airflow. The distnce between the irflow disturbnce (i.e., fittings, trnsitions, etc.) nd the instlled loction, s shown below, is the minimum requirement for instlltion to ssure ccurte irflow mesurement. Wherever possible, the ELECTRA-flo Probe Arry-Level 2, ELECTRA-flo/ Sttion-Level 2 or ELECTRA-flo/C Sttion-Level 3 should be instlled with longer runs of stright duct (or clernces) thn shown. Airborne Contminnts. The levels of ir filtrtion nd clenliness ssocited with commercil HVAC Systems, whether supply/return/exhust ir, re stisfctory for opertion of the ELECTRA-flo Probe Arry-Level 2, ELECTRA-flo/ Sttion-Level 2 or ELECTRA-flo/C Sttion-Level 3. Applictions contining irborne contminnts my require periodic mnul clening using compressed ir nd/or physicl clening. Direction of Airflow. To prevent improper instlltion, ech ELECTRA-flo Probe Arry-Level 2, ELECTRA-flo/ Sttion-Level 2 or ELECTRA-flo/C Sttion-Level 3 is mrked with n rrow indicting the required direction of irflow. 3X 4X FAN DISCHARGE FAN INLET DISCHARGE INLET 2.5X.75X.5X UNVANED VANED SWEEP PLENU TAKEOFF BRANCH DUCT 4X REDUCING TRANSITION EXPANDING TRANSITION DAPERS BELLOUTH INLETS NOTE: 'X' Distnces re to leding or triling edges for STATIONS (shown), or to centerline for PROBES. Equivlent Duct Dimeter X Rectngulr Duct: X = 2(HxW) H+W Circulr Duct: X = Duct Dimeter Snt Ros, CA (707) (707) Fx FLOW EASUREENT SOLUTIONS Rev.0 (1/17) &
6 ELECTRA-flo Probe Arry - Level 3 ELECTRA-flo/ Sttion - Level 3 SUBITTAL SHEET INIU INSTALLATION REQUIREENTS INSTALLATION CONSIDERATIONS. Instlltion fctors to be considered when pplying the ELECTRA-flo Probe Arry-Level 3 or ELECTRA-flo/ Sttion-Level 3 re s follows: Turbulent Airflow. The distnce between the irflow disturbnce (i.e., fittings, trnsitions, etc.) nd the instlled loction, s shown below, is the minimum requirement for instlltion to ssure ccurte irflow mesurement. Wherever possible, the ELECTRA-flo Probe Arry-Level 3 or ELECTRA-flo/ Sttion-Level 3 should be instlled with longer runs of stright duct (or clernces) thn shown. Airborne Contminnts. The levels of ir filtrtion nd clenliness ssocited with commercil HVAC Systems, whether supply/return/exhust ir, re stisfctory for opertion of the ELECTRA-flo Probe Arry-Level 3 or ELECTRA-flo/ Sttion-Level 3. Applictions contining irborne contminnts my require periodic mnul clening using compressed ir nd/or physicl clening. Direction of Airflow. To prevent improper instlltion, ech ELECTRA-flo Probe Arry-Level 3 or ELECTRA-flo/ Sttion-Level 3 is mrked with n rrow indicting the required direction of irflow. 5X 6X 2.5X FAN DISCHARGE FAN INLET DISCHARGE INLET 3.5X 2.5X 2.5X 3X UNVANED VANED SWEEP PLENU TAKEOFF BRANCH DUCT 1.25X 6X REDUCING TRANSITION EXPANDING TRANSITION DAPERS BELLOUTH INLETS NOTE: 'X' Distnces re to leding or triling edges for STATIONS (shown), or to centerline for PROBES. Equivlent Duct Dimeter X Rectngulr Duct: X = 2(HxW) H+W Circulr Duct: X = Duct Dimeter Snt Ros, CA (707) (707) Fx FLOW EASUREENT SOLUTIONS Rev.0 (1/17) &
ELECTRA-flo G5 TRANSMITTER (Version 2.4) THERMAL AIRFLOW MEASURING SYSTEM
ELECTRA-flo G5 TRANSITTER (Version 2.4) THERAL FLOW EASURING SYSTE SUBITTAL SHEET STANDARD CONSTRUCTION ximum Number of Sensors: Disply: Configurtion Access: Power Supply: Power Consumption: Outputs: Anlog
JUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
OPTIVENT ULTRA VAV damper TECHNICAL DATA
OPTIVENT UTRA VAV dmper TECHNICA DATA 2 OPTIVENT UTRA VAV DAPER USA, UDA USA UDA VAV dmpers re used to regulte nd control ir flow for supply nd extrct ir. They re highly verstile, nd cn be used to control
Spring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
FE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
Two-Position Electric Duplex Room Thermostats
TC-xx Series, TC-xx Series, TF- Series Two-Position Electric Duplex Room Thermostts These thermostts provide on-off control of heting/cooling systems. Fetures: Seprte units for C nd F. All units except
Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
PE-5000 DUCT STATIC PRESSURE SENSING ELEMENT
Technical Data Sheet PE-5000 DUCT STTIC PRESSURE SENSING ELEMENT DESCRIPTION Model PE-5000 units are insertion-type primary duct pressure sensing elements designed to achieve pressure signal accuracy and
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")
Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533
CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
GUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
CS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
Ø5/16" HOLES FOR FASTENING TO CURB
SIDE INTKE SUPPLY UNIT / SIDE INTKE GLVNIZED SUPPLY UNIT OPERTION INSTRUCTIONS ND PRTS MNUL SIS SERIES MODELS: SIS-9, SIS-10, SIS-12, SIS-15, SIS-18, SIS-20 SIG SERIES MODEL: SIG-9, SIG-10, SIG-12, SIG-15
DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
Transmission and Driveline. Section 2A - Transmission and Driveline
Trnsmission nd Driveline Trnsmission nd Driveline Tle of Contents Section 2A - Trnsmission nd Driveline 2 A Generl Informtion...2A-2 Ger Rtio Selection...2A-2 Engine nd Propeller Shft Instlltion Angle...2A-2
DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
VARIFLUX IFS 6000 Electromagnetic Flowmeter
KROHNE 04/2001 D 31 VR60 02 E GR/PRINTO IFS 6000 Electromgnetic Flowmeter for snitry nd septic pplictions For mny different ppliction fields with mny different types of process connections For mesurement
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
SERIES 454FTB-WGF TECHNICAL SPECIFICATIONS
Complex Technology Made Simple Insertion Flow Meter SERIES 454FTB-WGF TECHNICL SPECIFICTIONS The Kurz WGF single point insertion flow meter for wet gas environments includes the qualities and features
4%$ %%X 0RODUCT!PPLICATION 4HE "OTH 4%$ FOR 4%$ 80 DUSTTIGHT 2ATINGS
5-4.1 Termintor TM ZT EEx ed Pipewll Sensing Thermostts Product Specifictions Appliction... Electric Het Trcing ontrol The ZT-WP nd ZT-XP re designed for use s djustble control thermostts for freeze protection
3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
Ultrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
Thermocouple Thermometer omnigrad S- TC 88
Technicl informtion TI 279T/02/en 60022508 Thermocouple Thermometer omnigrd S- TC 88 Thermocouple ssembly with extension neck Replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics The TC 88
JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
PERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
POWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)
R Easy-aire GX PNEUMTIC DELIVERY SYSTEM 24mm(") DI. PNEUMTIC TUBE SYSTEM 86G OPERTOR ND 8G CUSTOMER DETILS L962 CLL -8-999-6 OPERTOR CONTROL PNEL PROJECTION FILE NO. 8-26 REV. SUBJECT TO CHNGE W ITHOUT
DIESEL EGT GAUGE INSTALLATION INSTRUCTIONS P14D AA
DIESEL EGT GUGE INSTLLTION INSTRUCTIONS P4D4-9235- Revision: - Dated 3/9/4 Replaces: None DIESEL EGT GUGE INSTLLTION HRDWRE CONTENTS P4D4-44- - DIESEL EGT GUGE KIT COMPONENT - DIESEL EGT GUGE SSY (PRT
JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849
Dt sheet 777 Pge / JUMO dtrans T6 Multifunctionl Four-Wire Trnsmitter in Mounting Ril Cse in Accordnce with DIN EN 658 nd EN ISO 3849 Brief description The trnsmitter cquires the temperture through n RTD
DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
Directional Valve Size 06 WL 4.06
Directionl Vlve Size 06 WL 4.06 Instlltion dimensions ISO 4401/DIN 24340 6 Directionl vlve size 06 instlltion dimensions ISO 4401 / DIN 24340 6 Functionl Description he directionl control vlves WL 4/06
Mechanical Fail-Safe Damper Actuator NFA
2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close
Cable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR
LindRekt LindRekt mens rectngulr ventiltion ducts nd fittings. These re mde in oth stndrd nd specil versions. The product rnge lso includes complete, esily used joining system. Contents LindRekt Generl
World s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
OPTIONS BLANK = No Options B = BACnet MS/TP D = Internal Transmitter Display (Ref Note 4)
MOEL COE UCT SHAPE = Round = Rectangular = Flat Oval PROBE MATERIAL = Aluminum/ABS = CPVC & ABS = 0SS = High Temp SS (50 F / C Max) PROBE QUANTITY = = s = s = s SENSORS PER PROBE = Sensor per = Sensors
4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
SINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
Lincoln Under-cabinet Light Installation Instructions
Lincoln Under-cbinet Light Instlltion Instructions #1500178 Rev A Congrtultions on your new Lincoln Under-cbinet Light! Whether purchsed for its significnt energy svings nd efficiency, lower lifetime costs,
Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
Energy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
JET PUMP. Table of Contents. Section 5 - Jet Pump
Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................
RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009
Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
PERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH
PERSEUS MEDIUM PRESSURE PF6 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED ITH AEx (NEC 5) Exd, Exi & INDUSTRIAL PRESSURE SITCH This rnge of switches fetures robust high qulity housing with or 2 seled SPDT
W-VI Series - Internal Make-up Air Wall Canopy
W-VI Internal Make-up ir Wall Canopy With Diffuser W-VI single shell combination internal make-up air/air curtain canopy constructed of stainless steel where visible and aluminized steel where concealed.
SINGLE DUCT TERMINAL UNITS 30X/HQX SERIES
30X/HQX SERIES 30X SERIES EXHUST 30HQX SERIES EXHUST HOSPITL GRDE QUIET TYPE WITH DISSIPTIVE SILENCER PRODUCT OVERVIEW Nailor Single Duct Exhaust Terminal Units are used to modulate exhaust flow from an
EFFEKTA. Solar inverter HX-Series NEU / NEW
EFFEKTA Power Supplies EFFEKTA Hungry Kft. H-678 Szeged, Dorozsmi út. inverter Solr inverter HX-Series Multifunctionl Photovoltic inverter for off-grid stnd-lone opertion s well s grid-connected opertion
Directional Valve Size 04 WL 4.04
Directionl Vlve Size 04 WL 4.04 Instlltion dimensions ISO 4401/ DIN 24340 4 Directionl vlve size 04 instlltion dimensions ISO 4401 / DIN 24340 4 Functionl description he directionl control vlves WL 4/04
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006
Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
AMD-42-TD. Thermal Dispersion Air Measuring Station with VCD-42 Control Damper. Application and Design. Ratings. Features and Control Options
Application and Design Thermal Dispersion Air Measuring Station with VCD-42 Control Damper The combines the functionality of a highly accurate thermal dispersion airflow measuring station and a low leakage
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisn Technology Group is your source for qulity new nd certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Directional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves
Selection Guide TAC 1354 Clifford Avenue P. O. Box 2940 Loves Prk, IL 61132-2940 www.tc.com AV-8xx Series Competitive Gloe Adpters AV-8xx Series Adpter Kits TAC AV-8xx Series Adpter Kits mount on the onnet
HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR
Innovtion in Technology for Aircrft Mintennce Equipment, Airline Support through Engineering & Trining Advnced Composite & Metllic Structures Cge Code - NATO Code : F7856 - Eur VAT- ID: FR90 328961073
CCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
CCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
INSTALLATION INSTRUCTIONS READ "SAFETY MANUAL" AND "USER MANUAL" BEFORE STARTING THE UPS INSTALLATION LAYOUT INFORMATION FANS FANS REMOVIBILE COVER
INSTLLTION INSTRUCTIONS RED "SFETY MNUL" ND "USER MNUL" BEFORE STRTING THE UPS INSTLLTION LYOUT INFORMTION FNS IR FLOW IR FLOW! HOT FNS REMOVIBILE COVER FRONT VIEW SIDE VIEW RER VIEW PERSPECTIVE VIEW PERSPECTIVE
SINGLE DUCT TERMINAL UNITS 3000 SERIES
000 SERIES 000 SERIES VRIBLE OR CONSTNT VOLUME PRODUCT OVERVIE Nailor 000 Series Single Duct Terminal units are simply put, versatile. hether the requirement calls for a constant or variable air volume
Radiant Process Heaters. Gemini. Medium Wave Heaters Twin Bore Quartz Tube Technology
Rdint Process Heters Gemini Medium Wve Heters Twin Bore Qurtz Tue Technology Design Fetures Industry stndrd twin ore qurtz tue formts with 95% het trnsmittnce 24-krt Gold Bck Coting for trgeted infrred
NOTICE. Notice to Users of This Manual ! DANGER ! WARNING ! CAUTION
Notice to Users of This Mnul Throughout this publiction, dngers, wrnings, cutions, nd notices (ccompnied by the Interntionl HAZARD Symbol! ) re used to lert the mechnic to specil instructions concerning
Pneumatic. PVL Inline Valves. Catalogue No.
Pneumtic PVL Inline Vlves Ctlogue No. GB-c PVL High flow, compct size Push-in threded connection DIN ril block mounting Light weight construction Inline stnd lone stckble version Avilble in 2 x 3/2-5/3
11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
Name Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B
Job Sheet 4 PLC-Controlled Conveyor nd Sensors OBJECTIVE To fmilirize yourself with the vrious sensors provided with the Flexible Mnufcturing System nd mesure their respective sensing rnges. To use the
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION
Varispeed E7 CIMR-E7Z. System Configuration
U11 C16 C22 U7 R131 C33 R6 U6 T1 U8 Y1 U14 R10 R10 JP3 R15 R5 R25 R15 R15 C11 U10 R21 R102 C12 R7 R105 + + U9 R28 C5 R20 R30 R JP5 JP6 U10 C3 JP1 C1 + C17 R14 R1 R2 R11 U1 C2 2 C35 RT4 C39 R5 R99 C21 R3
Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4
Directionl Vlve NG 04 WL4.04 Instlltion dimensions ISO 4401/ DIN 4340 4 Functionl Description he directionl control vlves WL 4/04 consists of housing (1), control spool (5) with two centering springs (4)
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
Contrans P Remote Seals. Flush or Extended Diaphragms DN 50/ DN 80 / 2"/ 3" in "sandwich construction" / EN
Contrns P Reote Sels Flush or Extended Diphrgs DN 50/ DN 80 / 2"/ 3" in "sndwich construction" 0/ (5422) + + + + + Isoltion etween Process nd Trnsitter with Mesuring Medi hving:! High Tepertures! Corrosive
MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
RTD Temperature Sensor omnigrad T -TR 24
Technicl Informtion TI 269T/02/en 60020989 RTD Temperture Sensor omnigrd T -TR 24 Sliding threded or weld-in process connection With replceble insert PCP (4...20 ma), HART or PROFIBUS-PA electronics Temperture
TITAN ULTRA LOW. PF266 ATEX/IECEx Exd, Exia & INDUSTRIAL ULTRA LOW PRESSURE SWITCH FEATURES ULTRA LOW PRESSURE
IAN ULRA LOW PF266 AEX/IECEx Exd, Exi & INDUSRIAL ULRA LOW SWICH his rnge hs been used to monitor extremely smll chnges in pressure nd hs been specified extensively for offshore pplictions. Incorporting