Hydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170

Size: px

Start display at page:

Download "Hydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170"

Blaise Watson
6 years ago
Views:

Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 960 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int.

.. 114 lpm Low Speed High Torque rake Motors G Series HY13-1553-001/,EU Exceptional Strength and Durability in a High Performance Motor/rake Package This brake motor consists of a G Series motor

1 Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum Pressure (to 3000 psi) (to 4000 psi) Eingangsdruck bar bar Pression entrée Presion Maxima Maximum Oil Flow Schluckstrom Débit d huile audal Maximo de ceite (to 30 gpm) lpm Low Speed High Torque rake Motors G Series HY /,EU Exceptional Strength and Durability in a High Performance Motor/rake Package This brake motor consists of a G Series motor integrated into a wet disc, spring applied, hydraulically released brake. The brake is capable of up to 12,000* lb-in of holding torque. The brake is front mounted for reliable operation even in the event of a drive link failure. The brake release port is capable of pressures to 3000 PSI. This brake is designed to be a parking brake only. Dynamic braking is not recommended. Maximum Speed Drehzahl Vitesse de rotation Velocidad Maxima (660 rpm) 660 rpm ont. Int. Maximum Torque (9,239 lb in) (12,636 lb in) MaxDrehmoment 1044 Nm 1428 Nm ouple Torque Maximo Maximumg Side Load at Key Seitenlast harges latèrales arga Maxima Lateral (to 4790 lb) N Rated rake Holding Zero Release Pressure Nm (in-lbs) Maximum Full Release Pressure bar (PSI) 1350 (12,000) 22 (315) 12,000 in-lbs is standard holding capacity. For other holding capacities, consult the factory for price and availability. NOTE: & Mounting Only Operation of this unit with the shaft positioned upward away from the horizon by more than 30 is not recommended. Operation of this unit other than horizontal should be tested and approved prior to production. This brake is designed to be a parking brake only. Dynamic braking is not recommended. rake service interval: the springs and seals should be serviced at or before 500,000 brake cycles. ustomer installation bolts (4) should be 12 mm (.5 in) dia and torqued to a minimum of 122 Nm (90 ft-lbs). GRev001.p65,pfm * With optional spring package. 170

2 Radial Load / Radiale Wellenbelastung harges Radiale / arga Radial Low Speed High Torque rake Motors G Series HY /,EU Wheel Mount/Radnabengehause Monture à roue/ Montaje de rueda Side Load - N (lbs) (10000) Max Load urve (8000) (6000) (4000) (1) 50.8 (2) 76.2 (3) (4) (5) (6) Distance from Mounting Face - mm (in) The allowable side load curve is based on uni-directional steady state loads for L 10 bearing life at 3 x 10 6 revolutions. Die zulässige auslegbare radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhältnissen auf eine L 10 Lebensdauer mit 3 x 10 6 Umdrehungen kalkuliert. La courbe de charge latérale permise se base sur des charges unidirectionnelles en régime permanent pour le roulement L 10 à 3 x 10 6 révolutions. La curva de valores admisibles de carga lateral está basada en cargas constantes para cojinetes L 10 a 3 x 10 6 revoluciones. Equation to alculate the Expected Radial earing Life Gelichung zur Ermittlung der Lagerlebensdauer Equation to calculate the allowable side load "for a given load : estimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last The maximum load curve is defined by bearing static load capacity. This curve should not be exceeded at any time including shock loads. Die maximale radiale Wellenbelastungskurve ist definiert als maximale statische Last ohne Drehzahl. Sie gilt als Grenze und sollte keinesfalls überschritten werden. La courbe de charge maximale est définie par la capacité de charge statique portante. ette courbe ne devrait être dépassée en aucun moment y compris pour les charges par à-coups. La curva de carga máxima queda definida por la capacidad de carga estática del cojinete. No se deben superar los valores de esta curva, ni siquiera con cargas provisorias de impacto. Use F a, F b and S in equation to determine hours of L 10 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b, und S in die nachstehende Formel. 3 x 10 6 { F a }3.33 L = 60 x S F b Where / Mit: S = Shaft Speed RPM / btriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = llowable side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = pplication side load. / nwendungsseitige Wellenbelastung Note: alculations are based on L 10 bearing life per ISO 281. uslegung basiert auf einer L 10 Lenbendauer nach ISO 281 GRev001.p65,pfm 171

3 Mounting / Gehäuse arter / Montaje Low Speed High Torque rake Motors G Series HY /,EU ode: Front Mounting / Front olting (2.620) L 99.8 (3.93) 21.9 (.86) 16.8 (.66) 47.2 (1.860) 87.8 (3.460) (7.30) (6.75) (5.000) (4.996) ø / (5.000 / 4.998) ø 13.46(.530) x (1.54) Deep 1/2-13 UN (7.18) ø (7.50) ode Weight / Gewicht Poids/Peso Length ode: kg (lb) (60.2) (60.8) (61.3) (62.1) (63.0) (63.9) (65.2) (66.7) (68.3) (69.9) (73.3) (77.1) "L" mm "L" (in) (7.57) (7.69) (7.82) (8.00) (8.19) (8.44) (8.73) (9.07) (9.32) (9.69) (10.44) (11.19) SE "" 2 olt "L" (5.55) (4.34) 61.6 (2.43) 6.22 (.245) (3.470) (.560) ø146.1 (5.75) Ø185.4 (7.30) Ø (5.000) (4.996) 15.8 (.620) 40.6 (1.6) o / / (4.000 / 3.996) (7.40) ode "" Weight / Gewicht Poids/Peso Length "L" "L" kg (lb) (62.6) (63.2) (63.7) (64.5) (65.4) (66.3) (67.6) (69.1) (70.7) (72.3) (75.7) (79.5) mm (in) (9.18) (9.31) (9.43) (9.62) (9.81) (10.06) (10.35) (10.68) (10.93) (11.31) (12.06) (12.81) GRev001.p65,pfm 172

4 Mounting / Gehäuse arter / Montaje Low Speed High Torque rake Motors G Series HY /,EU ode: Rear Mounting/Thru olting (7.40) (2.620) L 99.8 (3.93) 21.9 (.86) 16.8 (.66) 47.2 (1.860) (7.30) (6.75) (7.30) (5.000) (4.996) Length ø 13.5 (.530)** **Will not support a bolt or nut without a bracket. ode Weight / Gewicht Poids/Peso ø / (5.000 / 4.998) kg (lb) (60.2) (60.8) (61.3) (62.1) (63.0) (63.9) (65.2) (66.7) (68.3) (69.9) (73.3) (77.1) "L" mm "L" (in) (7.57) (7.69) (7.82) (8.00) (8.19) (8.44) (8.73) (9.07) (9.32) (9.69) (10.44) (11.19) GRev001.p65,pfm 173

5 Ports / nschlüße Orifices / Lumbreras Low Speed High Torque rake Motors G Series HY /,EU ode: S ode: M* 7/8-14 SE O-Ring Manifold 4 x 5/16-18 UN Thd x (.500) Min ode: J 9/16-18 SE O-Ring (2.3) (1.8) 63.5 (2.50) (2.3) 7/8-14 SE O-Ring Ports 7/16-20 O-Ring Port (.56) (1.13) 7/16-20 O-Ring Port 9/16-18 SE O-Ring Ports 7/16-20 O-Ring Port *Note: Motor with manifold mount is supplied with 2 o-rings. Zum Motor mit Universalanschluß werden 2 o-ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. El motor con montaje de distribuidor se suministra con 2 sellos toroidales. Ø17.3 (0.68) Ø12.7 (0.5) - O-Ring Ø12.37x (0.091) GRev001.p65,pfm 174

6 Rear Ports / Endanschluß limentazione Laterale / Orifices arriér Low Speed High Torque rake Motors G Series HY /,EU ode: N 7/8-14 SE O-Ring, xial 5.18 / 4.67 (.204 /.184) 7/8-14 STRIGHT THD O-RING PORTS Ø126.6 (4.984) 2 x 21.6 ±.5 [.85 ±.02] ode: 7/8-14 SE O-Ring, Radial "L" (0.972) "W" + 2 kg (4.41 lb) 22.4 (.88) (.90) Ø126.6 (4.984) (1.800) (2.580) 7/8-14 STRIGHT THD O-RING PORTS ode: E "L" (0.972) "W" + 2 kg (4.41 lb) Manifold, Radial (5.62) 22.4 (.88) (1.125) (.900) (1.800) (1.250) (2.500) 65.5 (2.58) Ø126.6 (4.984) 4X 5/16-18 UN X (.500) Min See pages for length " L " and Weight " W ". Längen " L " / Gewichte "W" siehe Seite Voir page pour les longueurs L et les poids W onsultar en la Página los valores de largo L y peso W. "L" (0.972) "W" + 2 kg (4.41 lb) GRev001.p65,pfm 175

7 Shafts / btriebswellen rbre / Ejes Low Speed High Torque rake Motors G Series HY /,EU ode & ode ode: /4" Keyed 106.7/104.7 (4.20/4.12) 65.5/63.5 (2.58/2.50) ode: /4" 14 Tooth Spline 106.7/104.7 (4.20/4.12) 65.5/63.5 (2.58/2.50) ode: /4" Taper 107.9/105.9 (4.25/4.17) 66.7/64.7 (2.63/2.55) ode: /8" J501 Taper 110.5/108.5 (4.35/4.27) 69.3/67.3 (2.73/2.65) ode: 62 SE 14 Tooth Spline 97.6/95.6 (3.84/3.76) 56.4/54.4 (2.22/2.14) GRev001.p65,pfm 176

8 Shafts / btriebswellen rbre / Ejes Low Speed High Torque rake Motors G Series HY /,EU ode: /4" Keyed 50.3 (1.98) 36.5 (1.437) 7.9 (.311) 8.01 / 7.91 v (.3155 /.3115) / (.448 /.427) (1.374) / (1.249 / 1.250) 5/8-18 UNF v19.05 (.75) ode: (1.660) Full Spline / (1.249 / 1.250) 1 1/4" 14 Tooth Spline ø (1.248) 5/8-18 UNF THD x16.0 (.63) Min Deep / (.1251 /.1309) / (1.035 / 1.057) 5/16x1 SE J502 ode: /4" Taper 1:8 35 (1.37) 500 Nm (375 Ft Lb) ø31.88 (1.255) ø31.75 (1.249) 1-20UNEF 19 (.748) 7.96 / 7.94 (0.313 / 0.312) 3.18 (.125) ode: (1.633) (0.833) 25.4 (1.00) 7.95 / 7.92 (.313 /.312) 1 3/8" J501 Taper (1.38) (1.37) Md = 500 Nm (375 Ft Lb) UNEF 1: (.125) (1.775) Min. ode: (1.0) Full Spline / (1.223 / 1.250) SE 14 Tooth Spline 5/8-18 UNF X v (19.1).75 Min / 3.32 (.1251 /.1309) / (1.035 / 1.057) (1.080) Ø (1.070) GRev001.p65,pfm 177

9 Ordering Information / estellschlüssel System de ommande / Imformacion para pedidos Low Speed High Torque rake Motors G Series HY /,EU G XXXX X X XX X XXXX Series Displacement Schluckvolumen ylindrée Desplazamiento Mounting Gehäuse arter Montaje Ports nschluß Plan de raccordement Lumbreras Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U / cm 3 /rev ode Front Port Rotation vail. ode cm 3 /tr / cm 3 /giro / / / / / / / 405 ode S Ports 7/8-14 SE 7/8-14 UNF, xial vail. 0 Standard Reverse 1 Timed Manifold / / / / 785 Rear Ports Endanschluß limentazione Laterale Orifices arriér / 960 7/8-14 UNF, Radial ode Rear Port Rotation vail. ode Mounting vail. 0 Standard Front Mtg/Front olting 1/2-13 UN Thd Manifold Rear Reverse 1 Timed Manifold SE "" 2 olt E ode Shaft vail /4" Keyed Rear Mtg/Thru olting J 9/16-18 SE /4" 14 Tooth Spline N M Manifold Front /4" Tapered* 1 3/8" Tapered* 62 SE 14 Tooth Spline GRev001.p65,pfm * astle nut available on Tapered Shafts Only. Ecrou a creneaux degages disponible pour l'arbre conique seulement Solo eje conico viene con tuerca entallada ode Description vail. No Paint No lackiert lack Paint Schwarz lackiert See Page 219 for dditional Options 178

10 Notes / Hinweis Remarques / Notas Low Speed High Torque rake Motors G Series HY /,EU GRev001.p65,pfm 179

Hydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204

Hydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204 Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 958 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum