VWR FOR SIEVING. Test sieve shakers and accessories. Ultrasonic sieving systems. Sample splitters. Test sieves. Standards.

Transcription

1 VWR FOR SIEVING Test sieve shakers and accessories Ultrasonic sieving systems Sample splitters Test sieves Standards Ultrasonic baths Useful accessories Available from P: E: VWR Products are sold exclusively at Bio-Strategy in Australia and New Zealand

2 CERTIFICATES Control of measuring instruments and inspection certificates for VWR test sieves EN ISO 9000 ff. standard requires measuring instruments to be inspected at regular intervals. This also includes test sieves that are used as measuring instruments. VWR offers you the opportunity to examine test sieves by using a computerised video analysis system at the manufacturers works laboratory or on-site. During the inspection, aperture sizes are measured and recorded in warp and weft direction. Statistical analysis is then used to verify the quality of the test sieve. Following inspection, test sieves receive a seal. For each inspected test sieve, the customer obtains an Inspection Certificate 3.1 according to EN showing the distribution of aperture widths in graphic (for test sieve cloth only) and tabular form, as quality assurance documentation. Test sieves are inspected by specially skilled people at the manufacturer s factory using a calibrated computerised video analysis system. The Materialprüfungsanstalt für das Bauwesen, Institut für Baustoffe, Massivbau und Brandschutz (MPA IBMP TU Braunschweig) Institute confirms that the manufacturer s measuring device corresponds to ISO :2000 (5.2, Test Methods Test 3) and ASTM E ( Test methods for checking wire cloth and testing sieves ) to determine whether they conform to specification. The manufacturer s calibration method guarantees traceability to the national measuring standard. DIN EN Certificate of Compliance with the Standard 2.1 Werksbescheinigung 2.1 Attestion de conformité à la norme 2.1 TEST SIEVE ANALYSENSIEB TAMIS DE CONTROLE DIN ISO 3310, NF ISO 3310, ISO 565, ASTM E11, BS 410 Aperture width / Nennweite / Ouverture w: Manufactured in compliance with the quality assurance instructions according to ISO The test sieve tolerances coincide with the standard of the test sieve label. Hergestellt unter Einhaltung der Vorgaben für die Qualitätssicherung nach ISO Das Analysensieb entspricht in seinen Toleranzen dem auf dem Typenschild genannten Standard. Fabriqué en conformité avec les critères de la norme ISO Le tamis de contrôle répond aux critères de la norme figurant sur la plaque. Serial No. Date Maintenance of Test Sieves See ISO , DIN 66165, Part 1 and Part 2 Test Sieves with apertures of 500 µm and smaller should be cleaned in an ultrasonic bath. After ultrasonic cleaning rinse the test sieve with clear water and blow out the sieve bottom with compressed air. Let the water drip for about 5 minutes and dry the test sieve at C max. for about 30 minutes. Remove any remaining particles from the surface of the mesh by tapping the test sieve frame slightly against a rubber or wooden pad. Never remove particles by brushing. Behandlung von Analysensieben Siehe auch DIN 66165, Teil 1 und Teil 2 sowie ISO Analysensiebe mit Maschenweiten von 500 µm und feiner müssen im Ultraschallbad gereinigt werden. Nach dem Ultraschallbad mit klarem Wasser nachspülen und Siebboden mit Druckluft streifenfrei ausblasen, ca. 5 Minuten abtropfen und ca. 30 Minuten bei max C trocknen lassen. Noch vorhandene eingeklemmte Grenzkörner durch leichtes Klopfen des Analysensiebrahmens gegen eine Holz- oder Gummiunterlage entfernen. Keine Bürsten oder Pinsel benutzen. Entretien des tamis de contrôle Voir ISO et DIN 66165, 1ère et 2ème partie Les tamis de contrôle ayant des ouvertures de maille inférieures à 500 µm doivent être nettoyés dans un bain à ultra-sons. Après nettoyage, il faut les rincer à l eau claire et souffler de l air comprimé sur toute la surface du tamis. Ensuite, égoutter pendant environ 5 minutes et laissez sécher environ 30 minutes à C. Si des particules sont restées coincées dans les mailles, il est possible de les déloger en frappant doucement le tamis contre un support en bois ou en caoutchouc. Ne jamais utiliser de brosse ou de pinceau dans ce but. 1. Standard Certificate of Compliance 2.1 The metal cloth for test sieves and the test sieve itself are manufactured to current standards. Manufacturing is subject to our quality assurance system certified according to EN ISO Each VWR test sieve is delivered with a Certificate of Compliance with Order 2.1 according to EN as standard. 2. Optional Inspection Certificate or Calibration Certificate 3.1 VWR test sieves can be supplied with an Inspection Certificate or Calibration Certificate 3.1 according to EN with measuring results of a specific test. A re-certification service is also available, please contact your local VWR sales office. Both methods carry out measurement in warp and weft direction. They differ in the quantity of the measured aperture widths, resulting in different confidence levels. During a calibration three times as many aperture widths are measured compared to during a certification. In general the test sieve is subject to a specific inspection. Aperture widths are stated for warp and weft direction. The results are recorded for further control measurements. 10 VWR VWR FOR SIEVING

3 Test sieves Frame: Stainless steel; woven wire cloth: Stainless steel, ISO 3310, ASTM E11, BS 410, AFNOR Delivery information: Supplied as standard with a certificate of compliance 2.1 according to DIN EN Optional: Inspection certificate of calibration 3.1 according to DIN EN with measuring results of a specific test. Sieves and accessories of other dimensions are available on request. Please go to for a full overview. All sieves are supplied with serial number and a certificate of compliance with the order 2.1 according to DIN EN Further certificates and calibration services are available. Contact your local VWR sales office for further details. Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

4 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , Sieve cover Sieve pan Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Sealing ring, PVC Sieve cover Sieve pan Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , VWR VWR FOR SIEVING

5 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Sealing ring, PVC Sieve cover Sieve pan Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm

6 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm VWR VWR FOR SIEVING

7 Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

8 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 203 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , VWR VWR FOR SIEVING

9 Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate ring (sieve frame without base) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm

10 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm VWR VWR FOR SIEVING

11 Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate ring (sieve frame without base) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm

12 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate ring (sieve frame without base) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 315 mm VWR VWR FOR SIEVING

13 Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 400 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 400 mm

14 Test sieves Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Intermediate pan (sieve frame with solid base) Intermediate ring (sieve frame without base) Sealing ring, PVC Sealing ring, Viton (-15 up to +200 C) Sieve cover Sieve pan Sieve pan with discharge nozzle Calibration certificate 3.1 according to EN (together with initial order of sieve). Up to 400 mm Inspection certificate 3.1 according to EN (together with initial order of sieve). Up to 400 mm VWR VWR FOR SIEVING

15 Test sieves, mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Sieve cover Sieve pan Sieve pan with discharge nozzle

16 Test sieves Test sieves with square holes Frame: Stainless steel; perforated plates: Galvanised steel, ISO , ASTM E323, BS 410, AFNOR Delivery information: Supplied as standard with a certificate of compliance 2.1 according to DIN EN Optional: Inspection certificate of calibration 3.1 according to DIN EN with measuring results of a specific test. Sieves and accessories of other dimensions are available on request. Please go to for a full overview. All sieves are supplied with serial number and a certificate of compliance with the order 2.1 according to DIN EN Further certificates and calibration services are available. Contact your local VWR sales office for further details. Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , VWR VWR FOR SIEVING

17 Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

18 Test sieves Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , VWR VWR FOR SIEVING

19 Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Test sieves, mm, with square holes , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

20 Useful accessories Mixer mill, Star Beater A ball mill for disintregration of small sample volumes that can also be used to shake/mix microtubes and microplates. Wide range of applications in different scientific fields from geology to biotechnology. Easy to use - simple knob and keypad to control frequency and timer Easy to maintain - brushless DC motor Large range of grinding jars and tube holders to suit the sample requirements Model Star Beater Max. sample volume (ml) 2 50 Vibrational frequency (Hz) 3-30 Speed display LED Grinding time setting (min) 5 s to 60 min Power consumption (W) 200 VA W D H (mm) Weight (kg) 42 Description Pk Cat. No. Star Beater Material Ø (mm) Nominal volume (ml) Sample volume (ml) Max. feed size (mm) Pk Cat. No. Grinding jars Stainless steel 1,5 0, Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Hardened steel 1,5 0, Hardened steel Hardened steel Hardened steel Hardened steel Hardened steel Tungsten carbide PTFE Grinding balls Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Hardened steel Hardened steel Hardened steel Hardened steel Hardened steel Hardened steel Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Description Pk Cat. No. Tube holder, PTFE for reaction vials, 12 0,2 ml tubes on each arm Tube holder, PTFE for reaction vials, 12 2 ml tubes on each arm Tube holder, PTFE for reaction vials, 6 2 ml tubes on each arm Tube holder, PTFE for reaction vials, 6 2 ml tubes (screw cap) on each arm Holder, PTFE, for up to 3 microplates or 1 deep well plates on each arm Rack, PTFE, for 24x 1,5/2,0 ml tubes (with or without screw cap) Dummy plate, PTFE, for replacing one microtitre plate in the rack Rack, PTFE, 50 ml with 5 places for conical tubes Set of spanners 1 SET Holder for 15 ml falcon tubes Holder for up to 3 microplates or 1 deep well plates on each arm VWR VWR FOR SIEVING

21 Disposable weighing boats PS, square These flexible weighing boats, with smooth surfaces, enable accurate pourout with minimal sample loss. They are biologically inert and resistant to dilute and weak acids, aqueous solutions, alcohols and bleaches. Ideal for use with microwaves, balances or moisture analysers. Shallow form with wide, flat bottom avoids tipping Rounded corners simplify transfer Temperature resistant up to +70 C Capacity (ml) W D H (mm) Colour Pk Cat. No. Standard Blue Black White Blue Black White Blue Black White Anti-static Blue Black White Blue Black White Blue Black White

22 Useful accessories Weighing boats, paper VWR paper weighing boats are a first in eco friendly laboratory consumables. Control contents like a polystyrene weighing boat making them easier to handle than standard, flat weighing paper Made of greaseproof paper that meets FDA 21 CFR , components of paper in contact with aqueous and fatty foods, with 2I CFR and contact with dry foods Compatible with heat applications up to a maximum of 210 ºC They are both Eco-In and Eco-Out. Eco-In because they are FSC Certified. The papers used to manufacture our boats are made from responsibly forested wood products. Eco-Out because they are naturally biodegradable in the standard municipal waste stream. Description W D H (mm) Colour Pk Cat. No. FSC Certified White FSC Certified Brown FSC Certified White FSC Certified Brown FSC Certified White FSC Certified Brown Disposable weighing and drying dishes or pans , & & Dishes and pans, made of aluminium. Compatible with most balances and dryers Oil-free Slightly tapered for easy stacking , & Sturdy, disposable dishes and pans. Ideal for general purpose weighing, dispensing, storage and drying applications. Description Capacity (ml) I-Ø H (mm) Pk Cat. No. Disposable smooth-walled aluminium weighing dishes Smooth-sided, flat bottom, multipurpose utility dish Smooth-sided, flat bottom, multipurpose utility dish Smooth-sided, flat bottom, multipurpose utility dish Disposable aluminum weighing/drying pans Weighing pan, ideal for general purpose weighing and dispensing. Compatible with both open and enclosed balances with a small weighing area (70-95 mm) , Weighing/drying pan, ideal for general purpose weighing, dispensing, storage and drying. Compatible with Mettler, Sartorius, AND, Denver Instruments , Flat-top balance pan. Compatible with Ohaus balances and moisture analysers or any flat top balance , Disposable aluminium drying pans for solids/liquids Drying pan for solids (compatible with Cenco moisture analyser) , Drying pan for liquids (compatible with Cenco moisture analyser) , VWR VWR FOR SIEVING

23 Sampling spoons PS, white. These disposable spoons are produced in a cleanroom environment and gamma radiation sterilised. They are ideal for the sampling of powder, granules and pastes. Available in two different sizes: 2,5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon) Production, assembling and packaging according to cleanroom Class 7 (10 000) According to EU food and FDA guidelines Individually packed, gamma radiation sterilised Length (mm) Capacity (ml) Pk Cat. No , Sampling scoops PS, white. These sterile scoops are ideal for the sampling of powder, granules and pastes. Production, assembling and packaging according to cleanroom Class 7 (10 000) According to EU food and FDA guidelines Individually packed, gamma radiation sterilised Thanks to the special handle construction, and the slightly angled edge, the scoop stands horizontally and can be laid down without the material trickling out. Capacity (ml) Length (mm) Colour Pk Cat. No White White Spatulas, disposable PP. Multipurpose, robust, inexpensive tools for collecting, transferring and processing samples of chemical and biological materials. Resistant to dilute acids and alkalis Reduce cross-contamination Autoclavable Compliant with FDA standards for applications involving contact with food The innovative shape of these spatulas allows them to be used as a spatula, spoon, scoop, scraper, mixing rod or for wiping. Ideal for recovering samples that have been frozen in liquid nitrogen. The macro type disposable spatulas are 50% larger than standard disposable spatulas. The long shaft makes it easier to transfer material from larger containers. Description Sterile Length (mm) Blade width (mm) Colour Pk Cat. No. Disposable Eco spatulas, biodegradable (EcoPure additive) Natural

24 Test sieve shakers, EML 200 series VWR by Haver & Boecker The EML 200 series offers different types of units. All models are suitable for 50 to 203 mm Ø sieves, a maximum sample/ batch load of 3 kg, have a cast aluminium housing and improved clamping system. Digital timer: 0 to 99 minutes or constant operation All shakers have a cover with inspection glass which allows samples to be viewed during sieving EML 200 Pure units which are ideal for standard analysis: Feature two given regulated amplitudes to select from: Fine or coarse Operation in set intervals of 10 seconds Classic eco clamping system EML 200 Premium units are suitable for users requiring precise and reproducable sieve analyses: Extra quiet electromagnetic drive Freely selectable amplitudes up to 3 mm Extra large, easy to use display and simple logical operation During sieving the remaining sieving time is shown on the display Up to 49 different sieving programs can be stored in the memory Option of Classic or HAVER TwinNut quick release clamping system EML 200 Premium Remote models also offer wet sieving, features as Premium units. Integrated full cone nozzle Separate controller which can be wall mounted Ordering information: Acceptance test certificate 3.1 according to DIN EN and IQ/OQ documentation for are available as optional accessories for all models, for details please contact your local VWR sales office. Description Application Pk Cat. No. EML200 Pure models EML 200 Pure with Classic eco clamping system, EU-plug Dry sieving 1 VWRI550106EU EML200 Premium models EML 200 Premium with Classic clamping system, EU-plug Dry sieving 1 VWRI550109EU EML 200 Premium with HAVER TwinNut quick clamping system, EU-plug Dry sieving 1 VWRI550108EU EML 200 Premium Remote models EML 200 Premium Remote with Classic clamping system, EU-plug Wet/dry sieving 1 VWRI550112EU EML 200 Premium Remote with HAVER TwinNut quick clamping system, EU-plug Wet/dry sieving 1 VWRI550111EU Description Application Pk Cat. No. Knurled nut for Classic eco clamping system EML Pure 1 HAVE Guide rod for Classic eco clamping system EML Pure 1 HAVE Full cone nozzle EML Premium Remote 1 HAVE Cover with inspection glass EML Premium and EML Pure 1 HAVE over with full cone nozzle and inspection glass EML Premium Remote (for wet sieving) 1 HAVE

25 Test sieve shakers and accessories Test sieve shakers, EML digital plus VWR by Haver & Boecker These electromagnetically-driven test sieve shakers are designed for sieve analysis with optimum three-dimensional sieving action. The self-readjusting amplitude, which uses permanent acceleration measurement of the whole sieve tower, balances the oscillation of the shaker and its stand. This guarantees that amplitude stays the same, irrespective of the feed quantity and the installation position. Memory for 10 test sieve parameter sets Timer function: 0-99 minutes or continuous operation Intermittent or continuous shaking operation Digital display of all functions 3000 impulses per minute (50 Hertz) Sound emission: 70 db(a) for EML 315 digital plus, EML 450 digital plus: 73 db(a) Maximum loading: 21 kg for EML 315 (6 kg sieved material), 42 kg for EML 450 (15 kg sieved material) EML 315 and 450 models are for dry and wet sieving and have a separate control device. Optional HAVER TwinNut the quick-release clamping system: TwinNut clamps for easy fixing and removal of the cover are an alternative to the standard Classic knurled nuts. The guide rods of the Classic system can also be used for the HAVER TwinNut system. Ordering information: Sieves and collecting pan must be ordered separately. IQ-OQ documentation on request. EML 315 digital plus N Delivery information: Included as standard with each shaker: Models with either Classic clamping system or TwinNut system are supplied with two guide rods (660 mm for EML 200 and EML 315; 850 or 1000 mm for EML 450) and two knurled nuts with handlebars, cover with inspection glass and water spray diffuser for wet sieving models. EML 450 digital plus T EML 450 digital plus N Application Type Pk Cat. No. EML 315 digital plus with Classic clamping system, for sieves up to 315 mm Ø Dry sieving EML 315 digital plus T, EU-plug 1 VWRI550061EU Wet sieving EML 315 digital plus N, EU-plug 1 VWRI550063EU EML 315 digital plus with TwinNut quick-release clamping system, for sieves up to 315 mm Ø Dry sieving EML 315 digital plus T with TwinNut quick-release clamping system, EU-plug 1 VWRI550084EU Wet sieving EML 315 digital plus N with TwinNut quick-release clamping system, EU-plug 1 VWRI550085EU EML 450 digital plus with Classic clamping system, for sieves up to 450 mm Ø Dry sieving EML 450 digital plus T, EU-plug 1 VWRI550064EU Wet sieving EML 450 digital plus N, EU-plug 1 VWRI550065EU 4 VWR VWR FOR SIEVING

26 Application Type Pk Cat. No. EML 450 digital plus with TwinNut quick-release clamping system, for sieves up to 450 mm Ø Dry sieving EML 450 digital plus T with TwinNut quick-release clamping system, EU-plug 1 VWRI550087EU Wet sieving EML 450 digital plus N with TwinNut quick-release clamping system, EU-plug 1 VWRI550088EU Description For Pk Cat. No. Guide rod, length 850 mm (one only) EML 450 digital plus/uwl Knurled nut with two handlebars (one only) EML 450 digital plus/uwl Cover with inspection glass (test sieve diameter 300/305/315/350/400 and 450 mm) EML 450 digital plus Cover with wide spreading spray diffuser (for wet sieving test sieve diameter 300/305/350/400 and 450 mm) EML 450 digital plus Additional weight for extra stability for test sieve diameter mm (27 kg) EML 450 digital plus Reduction piece, polyamide, to receive a sieve pan with diameter 400 mm under larger sieves EML 450 digital plus Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus Reduction piece, polyamide, to receive a sieve pan with discharge nozzle, diameter 200 mm EML 315 digital plus Sound absorbing cupboard EML 315 digital plus Sound absorbing cupboard EML 450 digital plus/uwl Inspection glass without centre hole (to be mounted on the cover) EML 450 digital plus/uwl Guide rod, length 1000 mm (one only) EML 450 digital plus/uwl Reduction piece for cover, for sieve Ø 76 mm EML Reduction piece for cover, for sieve Ø 100 mm EML Reduction piece for cover, for sieve Ø 150 mm EML Reduction piece for cover, for sieve pan with discharge nozzle <400 mm EML Inspection glass with central hole EML 200/EML Inspection glass with central hole EML 450/UWL IQ-OQ documentation for VWR-HAVER sieve shakers VWR by Haver & Boecker IQ/OQ documentation to assist with GLP compliance. Description For Pk Cat. No. IQ/OQ documentation EML 200 digital plus, EML 315 digital plus and EML 450 digital plus sieve shakers

27 Sieve shakers, heavy duty, UWL Haver & Boecker For test sieves up to 400 mm diameter or square sieves up to mm The UWL 400 is an efficient test sieve shaker and achieves optimum results for large feed quantities. It creates a three-dimensional sieving action and is especially designed for coarse grained products. The UWL 400 T is suitable for dry sieving; the UWL 400 N is suitable for wet sieving, and the UWL 400 H is suitable for square test sieves with beechwood frames. Separate control device, wall fixing possible Rotation speed: 1500 min -1 Timer function: minutes Max. loading: 50 kg (20 kg sieving material) Sound emission: 70 db(a) Delivery information: Included as standard with each shaker: Models with either Classic clamping system or HAVER TwinNut system are supplied with mm guide rods and two knurled nuts with handlebars, cover with inspection glass, water spray diffuser for wet sieving on model UWL 400 N and special appliance for beechwood frames on UWL 400 H model. Application Type Pk Cat. No. UWL heavy duty sieve shakers Dry sieving UWL 400 T, EU-plug 1 HAVE550404EU Dry sieving with square sieves UWL 400 H, EU-plug 1 HAVE550473EU Wet sieving UWL 400 N, EU-plug 1 HAVE550480EU UWL heavy duty sieve shakers with HAVER TwinNut quick-release clamping system Dry sieving UWL 400 T with HAVER TwinNut quick-release clamping system, EU-plug 1 HAVE550080EU Wet sieving UWL 400 N with HAVER TwinNut quick-release clamping system, EU-plug 1 HAVE550081EU 7

28 Sample splitters Sample splitters VWR by Haver & Boecker For dividing sieved material into representative test sieve samples. Type RT 6,3 and 12,5 Consists of 1 lacquered sheet steel rack, mm, 1 stainless steel divider and 3 receivers which are tin sheet (1,75 litres) or laminated plastic (2 litres). Type RT 25; 37,5; 50 and 75 Consists of 1 rack mm, 1 divider and 3 receivers with grab handles (8 litres), all of galvanised steel. Description Type Pk Cat. No. Type RT 6,3 and 12,5 12 partitions of 6,3 mm, 1,75 l tin sheet receivers RT 6, divisions of 6,3 mm, 2 l laminated plastic receivers RT 6, partitions of 12,5 mm, 1,75 l tin sheet receivers RT 12, partitions of 12,5 mm, 2 l laminated plastic receivers RT 12, Description Type Pk Cat. No. Type RT 25, 37,5, 50 and partitions of 25 mm RT partitions of 37,5 mm RT 37, partitions of 50 mm RT partitions of 75 mm RT Description For Pk Cat. No. Divider, stainless steel, 12 divisions, 6,3 mm Sample splitter RT 6, Divider, stainless steel, 18 divisions, 12,5 mm Sample splitter RT 12, Divider, galvanised sheet steel, 16 divisions, 25 mm Sample splitter RT Divider, galvanised sheet steel, 12 divisions, 37,5 mm Sample splitter RT 37, Divider, galvanised sheet steel, 8 divisions, 50 mm Sample splitter RT Divider, galvanised sheet steel, 6 divisions, 75 mm Sample splitter RT Rack, lacquered sheet steel, mm Sample splitters RT 6,3 and RT 12, Rack, galvanised sheet steel, mm Sample splitters RT 25, RT 37,5, RT 50 and RT Receiver, tin sheet, 1,75 litres Sample splitters RT 6,3 and RT 12, Receiver with grab handles, galvanised sheet steel, 8 l Sample splitters RT 25, RT 37,5, RT 50 and RT