whitedriveproducts SERIES Hydraulic Motor LIGHT DUTY

Transcription

1 SERIES LIHT DUTY Hydraulic Motor RS

2 RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using power robbing, two-piece rotor set designs with sliding contact points, RS Series motors utilize the patented Roller Stator design. Seven precision rollers for the contact points reduce friction, providing more power and longer life for your application. Each output shaft is custom ground to maintain exact tolerances between the housing and shaft, producing high volumetric efficiencies. Industry standard mounting flanges and output shafts allow the RS Series motors to interchange with competitive designs. typical applications conveyors, carwashes, positioners, light-duty wheel drives, sweepers, food processing, grain augers, spreaders, feed rollers, screw drives, brush drives and more series descriptions 0/1 - Hydraulic Motor Standard features / benefits The shaft is match ground to the housing bore to maintain highest volumetric efficiencies. high pressure shaft seal offers superior seal life and performance and eliminates the need for a case drain. Pressure fed bearing surface receives positive flow of clean, cool oil. heavy-duty drive link receives full flow lubrication to provide long life. The Roller Stator motor design increases efficiency and life by using roller contact versus a solid, sliding contact design. Specifications Speed Flow Torque Pressure CODE Displacement rpm lpm [gpm] Nm [lb-in] bar [psi] cm 3 [in 3 /rev] cont. inter. cont. inter. cont. inter. cont. inter. peak 00 2 [3.2] [730] 9 [840] 1 [170] 138 [00] 1 [2] [4.6] [] 1 [70] 138 [30] 1 [170] 138 [00] 1 [2] [.4] [] 147 [1300] 167 [1480] 1 [170] 138 [00] 1 [2] 0 3 [ 6.3] 70 3 [14] 169 [100] 19 [172] 1 [170] 138 [00] 1 [2] [6.8] [14] 68 [18] 184 [1630] 214 [1900] 1 [170] 138 [00] 1 [2] 7 [7.7] [14] 68 [18] 181 [1600] 8 [180] 3 [100] 1 [170] 1 [2] [.0] [] 222 [1970] 26 [230] 3 [100] 1 [170] 1 [2] 0 [.] [] 297 [2640] 34 [300] 3 [100] 1 [170] 1 [2] 24 [1.] [] 91 [24] 287 [240] 344 [3040] 86 [0] 4 [100] 1 [170] [17.9] [] 91 [24] 277 [2460] 30 [30] 69 [00] 86 [0] 3 [100] [24.9] [] 91 [24] 377 [330] 463 [40] 69 [00] 86 [0] 3 [100] Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed % of every minute of operation. 2 DELIVERIN THE POWER TO ET WORK DONE

3 RS (ll Series) For Light Duty pplications Displacement Performance [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 138 [00] 2 cm 3 [3.2 in 3 ] / rev Intermittent Ratings - % of Operation [89] [92] [90] [8] 19 [168] 17 [148] 13 [119] 1 [133] 18 [163] [181] 17 [14] 27 [243] 27 [243] 2 [218] 2 [223] 29 [23] 31 [274] 28 [21] 39 [342] 36 [318] 3 [307] 33 [290] 39 [348] 41 [366] 40 [3] 0 [44] 47 [417] 48 [429] 42 [37] 49 [438] 2 [464] 3 [46] 62 [49] 9 [26] 6 [499] 49 [43] 9 [23] 63 [6] 6 [72] 74 [66] 71 [631] 67 [93] [483] 74 [63] 76 [669] 8 [7] 78 [690] 86 [764] Overall Efficiency % 40-69% 0-39% 8.0 [.316] 14 [7] 29 [2] 43 [382] 8 [] 72 [637] 86 [764] 1 [892] 11 [19] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 138 [00] 76 cm 3 [4.6 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] [7] [1] 14 [2] 30 [263] 28 [22] 2 [221] 39 [341] 3 [314] 26 [227] 29 [22] 29 [260] 47 [416] 46 [403] 43 [379] 7 [02] 0 [446] 39 [341] 43 [381] 46 [40] 6 [74] 64 [62] 63 [] 74 [67] 71 [62] 1 [46] 9 [22] 63 [60] 82 [726] 82 [721] 79 [703] 93 [819] 92 [816] 8 [09] 7 [661] 80 [707] 98 [871] 98 [869] 97 [860] 111 [980] [932] 81 [7] 96 [848] 118 [46] 11 [] 11 [14] 8 [113] 1 [973] 134 [1184] 134 [1183] 132 [1172] 11 [16] Overall Efficiency % 40-69% 0-39% 11.7 [.462] 21 [183] 41 [366] 62 [49] 83 [732] 3 [916] 4 [99] 14 [82] 166 [146] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 138 [00] 89 cm 3 [.4 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 23 [6] 43 [383] 44 [388] 61 [38] 81 [7] 78 [686] 93 [824] 81 [71] 43 [376] 64 [66] 63 [61] 8 [74] 2 [902] 98 [867] 113 [04] 87 [766] 63 [9] 86 [760] 83 [739] 4 [9] [1] 2 [80] 137 [] 113 [998] 84 [743] 8 [93] 6 [937] 8 [1134] 144 [7] 141 [1] 161 [1422] 98 [864] 7 [13] 7 [11] 148 [1309] 164 [140] 164 [1448] [933] 138 [2] 11 [1336] 168 [1484] 169 [149] Overall Efficiency % 40-69% 0-39% 13.7 [.41] 24 [21] 49 [430] 73 [64] 97 [860] 1 [7] 146 [90] 170 [10] 194 [17] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. DELIVERIN THE POWER TO ET WORK DONE 3

4 RS (ll Series) For Light Duty pplications displacement Performance 0 17 [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 138 [00] 3 cm 3 [6.3 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 2 [221] 26 [233] 49 [433] 73 [648] 69 [606] 89 [789] 78 [693] 8 [7] 84 [746] 8 [97] 2 [461] 1 [449] 77 [682] 99 [873] 94 [830] 113 [999] 2 [90] 119 [49] 118 [40] 13 [1197] 76 [676] 77 [680] 1 [893] 3 [88] 0 [62] 142 [4] 7 [14] 147 [99] 13 [1198] 98 [870] 3 [914] [18] 146 [91] 14 [79] 161 [1429] 16 [1380] 172 [126] 141 [0] 11 [] 6 [1116] 10 [1331] 170 [104] 16 [1463] 187 [168] 182 [16] 146 [9] 174 [138] 19 [1721] 194 [1717] 166 [1473] 199 [178] 11 [1336] Overall Efficiency % 40-69% 0-39% 19.7 [.776] 28 [21] 7 [02] 8 [72] 113 [03] 142 [4] 170 [10] 198 [176] 227 [06] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] 1 17 [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 138 [00] 111 cm 3 [6.8 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 26 [227] 29 [23] 7 [03] 4 [479] 76 [669] 70 [621] 88 [779] 86 [764] 2 [901] 9 [844] 111 [984] 4 [481] [489] 82 [727] 80 [706] 6 [934] 97 [862] 116 [2] 9 [963] 9 [1142] 1 [7] 136 [0] 78 [689] 83 [733] 1 [969] 7 [91] 9 [1144] 3 [92] 146 [94] 139 [26] 16 [1378] 147 [97] 0 [888] 1 [974] 13 [1199] 134 [1190] 13 [137] 11 [1336] 170 [10] 168 [1482] 184 [1626] 9 [961] 134 [1183] 162 [1431] 162 [1437] 18 [1636] 177 [169] 1 [1783] 190 [1683] 13 [136] 184 [1631] 186 [1643] 6 [1826] 2 [1788] 180 [190] 216 [1911] Overall Efficiency % 40-69% 0-39% 17.3 [.681] 31 [271] 61 [41] 92 [8] 2 [83] 13 [134] 184 [1624] 214 [189] 24 [2166] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. 4 DELIVERIN THE POWER TO ET WORK DONE

5 RS (ll Series) For Light Duty pplications Displacement Performance 17 [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 7 cm 3 [7.7 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 29 [22] 28 [21] 61 [37] 61 [38] 87 [771] 82 [722] [927] 97 [89] 89 [787] 99 [879] 0 [88] 60 [34] 62 [4] 92 [816] 90 [797] 117 [32] 1 [987] 137 [14] 0 [66] 119 [1] 131 [1163] 119 [3] 86 [78] 93 [819] [13] 3 [84] 149 [1321] 142 [7] 167 [1474] 17 [1386] 146 [9] 1 [990] 1 [73] 13 [136] 11 [1338] 177 [166] 17 [148] 194 [17] 183 [1622] 174 [136] 9 [114] 149 [1319] 182 [1609] 181 [1602] 8 [1838] 1 [1781] 173 [131] 2 [186] 2 [1860] 176 [19] Overall Efficiency % 40-69% 0-39% 19.7 [.776] 3 [307] 69 [613] 4 [9] 139 [26] 173 [133] 8 [1839] 242 [2146] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] 164 cm 3 [.0 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 76 [] 32 [281] 3 [308] 36 [3] 72 [633] 69 [608] 6 [73] 9 [837] 83 [736] 73 [643] 2 [901] 93 [824] 111 [980] 71 [630] 76 [677] 78 [694] 114 [07] 9 [961] 4 [921] 134 [1184] 4 [9] 114 [] 142 [] 7 [11] 12 [1348] 3 [908] 111 [983] 116 [23] 1 [137] 149 [1318] 139 [33] 173 [131] 162 [1432] 14 [1366] 179 [18] 164 [1447] 141 [47] 141 [4] 19 [1403] 190 [1679] 188 [1667] 181 [197] 2 [1874] 3 [1796] 194 [1714] 219 [1936] 167 [1481] 182 [161] 193 [1707] 226 [1998] 224 [1979] 219 [1941] 21 [22] 241 [2133] 231 [4] 211 [1867] 223 [1974] 262 [2319] 267 [239] 28 [2284] 234 [70] 27 [2279] Overall Efficiency % 40-69% 0-39% 2.4 [1.000] 4 [398] 90 [796] 13 [1194] 180 [192] 22 [1990] 270 [2389] 31 [2787] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. DELIVERIN THE POWER TO ET WORK DONE

6 RS (ll Series) For Light Duty pplications displacement Performance 0 17 [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 1 [170] cm 3 [. in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 76 [] 47 [414] 49 [432] 47 [416] 43 [380] 90 [79] 83 [734] 7 [666] 116 [26] 97 [862] 8 [72] 2 [79] 4 [924] 96 [846] 98 [86] [927] 96 [849] 149 [1322] 139 [28] 8 [1134] 167 [147] 13 [138] 137 [] 174 [141] 14 [1366] 141 [0] 14 [1360] 17 [1386] 12 [1349] 194 [1721] 192 [1697] 17 [146] 217 [1924] [1811] 191 [1687] 224 [1981] 7 [1833] 183 [1621] 196 [1732] 4 [1809] 3 [1798] 249 [27] 238 [22] 227 [13] 262 [2322] 21 [2218] 240 [27] 224 [1983] 241 [2136] 24 [2166] 249 [24] 298 [2634] 296 [2621] 280 [2482] 316 [279] 300 [266] 292 [283] 284 [217] 299 [2642] 298 [2641] 340 [3007] 339 [2997] 329 [29] 318 [2811] 341 [3019] 30 [3094] Overall Efficiency % 40-69% 0-39% 31.8 [1.21] 6 [498] 1 [99] 169 [1493] 22 [1990] 281 [2488] 337 [2986] 394 [3483] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] 17 [] 3 [00] 2 [70] 69 [00] 86 [0] 4 [100] 24 cm 3 [1. in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 76 [] 83 [22] 91 [24] 130 [1147] [874] 36 2 [47] 2 [48] [490] 49 [437] 4 [398] 90 [79] 76 [676] 2 [22] 89 [784] 82 [722] 4 [96] 9 [842] 4 [919] 1 [988] 11 [18] 116 [28] [930] 147 [130] 142 [3] 4 [98] 17 [1386] 142 [6] 183 [1618] 17 [1387] 10 [1327] 168 [1491] 171 [1] 171 [117] 163 [1440] 186 [1649] 196 [1738] 186 [1642] 222 [1962] 2 [1786] 240 [26] 217 [1919] 222 [1966] 231 [41] 233 [64] 222 [1966] 268 [2372] 26 [2263] 234 [71] 278 [2460] 261 [2306] 267 [2361] 288 [247] 288 [21] 284 [2] 330 [2918] 311 [274] 282 [2499] 300 [268] 323 [286] 344 [3040] 34 [301] Overall Efficiency % 40-69% 0-39% 39.4 [1.1] 70 [617] 139 [34] 9 [181] 279 [2468] 349 [308] 418 [3702] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. 6 DELIVERIN THE POWER TO ET WORK DONE

7 RS (ll Series) For Light Duty pplications Displacement Performance [] 3 [00] 2 [70] 69 [00] 86 [0] 293 cm 3 [17.9 in 3 ] / rev Intermittent Ratings - % of Operation 4 [] 3 [14] 68 [18] 76 [] 83 [22] 83 [738] [16] 64 [63] 64 [64] 9 [24] 3 [468] 8 [94] 0 [887] 79 [698] 63 [8] 113 [00] 16 [1382] 119 [4] 6 [1111] 4 [96] 133 [1180] 13 [1193] 6 [1116] 186 [160] 170 [103] 16 [1381] 136 [06] 184 [1630] 216 [191] 190 [1679] 18 [1638] 189 [1673] 199 [178] 0 [1773] 19 [1728] 21 [2218] 241 [2132] 2 [1944] 1 [1780] [2213] 263 [232] 268 [237] 269 [2384] 278 [2463] 339 [3000] 319 [2824] 301 [2660] 284 [2] 329 [29] 343 [3033] 3 [314] 30 [3096] [24] 3 Width 4. [1.790] Overall Efficiency % 40-69% 0-39% Theoretical Torque - Nm [lb-in] 81 [713] 161 [142] 242 [2138] 322 [280] 403 [363] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] [] 3 [00] 2 [70] 69 [00] 86 [0] 409 cm 3 [24.9 in 3 ] / rev Intermittent Ratings - % of Operation 87 [767] 187 [166] [] 1 3 [14] [18] [] [42] 83 [22] 4 93 [824] 91 [24] Overall Efficiency % 40-69% 0-39% [991] 224 [1982] 336 [2974] 448 [396] 60 [496] [2.00] Displacement tested at 4 C [9 F] with an oil viscosity of 46cSt [213 SUS] 90 [793] 88 [777] 8 [73] 71 [631] 8 [16] 141 [47] 118 [42] 89 [792] 9 [] 116 [27] 89 [790] 180 [197] 17 [10] 177 [16] 169 [1498] 18 [1396] 238 [23] 22 [1989] 189 [1670] 14 [139] 219 [1934] 188 [1663] 274 [242] 286 [228] 287 [240] 280 [2477] 27 [2274] 328 [2906] 303 [2682] 278 [2463] 249 [24] 3 [2746] 264 [2336] 369 [3270] 374 [3309] 382 [3384] 370 [3273] 32 [3119] 434 [3837] 408 [3613] 367 [321] 334 [294] 446 [391] 466 [44] 469 [413] 466 [42] 441 [3901] DELIVERIN THE POWER TO ET WORK DONE Performance data is typical. Performance of production units varies slightly from one motor to another. 7

8 RS (0/1 Series) Light Duty Hydraulic Motor housings Dimensions shown are without paint. Paint thickness can be up to 0.13 [.00]. 2-HOLE, SE MOUNT, LINED PORTS 1/2-14 NPT 11 7/8-14 UNF 18 1/2 68 1/2 (TP) 48 [1.89 ] 2 [2.03] 41 [1.63] 48 [1.89 ], 11, [.8] [.8] 132 [.19] Ø82. [3.249] Ø82.3 [3.242] 46 [1.80] Ø6.3 [4.187] 13.1 [.14] 3 [.] 2 [.06] 2-HOLE, SE MOUNT, OFFSET PORTS 1/2 62 1/2 (TP) 48 [1.89 ] 2 [2.03] 48 [1.89 ] [.8] [.8] 3 [1.36] 16 [.63] 132 [.19] Ø82. [3.249] Ø82.3 [3.242] [.79] Ø6.3 [4.187] 13.1 [.14] 3 [.] 2 [.06] 71 [2.78] 2-HOLE, SE MOUNT, LINED MNIFOLD PORTS 17 1/2 Drilled 67 1/2 Drilled (TP) 48 [1.89 ] 48 [1.89 ] 47 [1.8] [.8] [.8] 17 - (4) /16-18 UNC, Min. Depth 13 [.0] 67 - (4) M8 x 1.2, Min. Depth 13 [.0] 14 [.6] 132 [.19] 32 [1.2] Ø82, [3.249] Ø82,3 [3.242] 32 [1.2] Ø6.3 [4.187] 13.1 [.14] Dimension is charted on page. 3 [.] 2 [.06] 39 [1.4] (TP) - Taller Pilot Height. Refer to detailed drawing for dimensional differences. Spotface Ø 16. [.60] 1.8 [.073] Min. deep 14 [.6] 8 DELIVERIN THE POWER TO ET WORK DONE

9 RS (0/1 Series) Light Duty Hydraulic Motor Housings Dimensions shown are without paint. Paint thickness can be up to 0.13 [.00]. 2-HOLE, SE MOUNT, OFFSET MNIFOLD PORTS 13 1/2 63 1/2 (TP) 48 [1.89 ] 48 [1.89 ] 47 [1.8] [.8] [.8] 3 [1.36] 36 [1.42] [.79] [.79] 16 [.63] 132 [.19] Ø82. [3.249] Ø82.3 [3.242] [.79] Ø6.3 [4.187] 13.1 [.14] [.79] [.79] (4) M8 x 1.2 Min. Depth 8 [.30] 2-HOLE, SE MOUNT, SIDE PORTS 70 1/2-14 NPT 71 7/8-14 UNF 78 1/2 132 [.19] 41 [1.63] Ø6.3 [4.187] 2 [2.03] 2.7 [.6] 2.8 [.1] 48 [1.89 ] 31 [1.22] Ø82, [3.249] Ø82,3 [3.242] 2 [.98] 13.1 [.14] 48 [1.89 ] 7 [2.23] 2-HOLE, SE MOUNT, OFFSET PORTS, VLVE CVITY 19 7/8-14 UNF 33 [1.28] 40 [1.6] 13.1 [.14] 2.7 [.6] 2.8 [.1] 91 [3.8] 37 [1.44] 16 [.63] 132 [.19] Ø82. [3.249] Ø82.3 [3.242] [.79] Ø6.3 [4.187] 48 [1.89 ] 2 [2.03] 3 [1.36] Dimension is charted on page. (TP) - Taller Pilot Height. Refer to detailed drawing for dimensional differences. DELIVERIN THE POWER TO ET WORK DONE 36 [1.42] 9

10 RS (0/1 Series) Light Duty Hydraulic Motor Housings Dimensions shown are without paint. Paint thickness can be up to 0.13 [.00]. 4-HOLE, SQURE MOUNT, LINED PORTS F30 1/2-14 NPT F31 7/8-14 UNF 4 [1.76] 49 [1.94] 39 [1.3] 39 [1.3] 3 [.] 2 [.06] 43 [1.69] H 48 [1.90] 39 [1.3] 39 [1.3] Ø 83 [3.2] 48 [1.90] (4) 3/8-16 UNC, Min. Depth 16 [.62] 1.4 [.0] 1.1 [.04] 4-HOLE, SQURE MOUNT, LINED MNIFOLD PORTS F37 1/2 Drilled 39 [1.3] 4 [1.76] 49 [1.94] 39 [1.3] 2 [.06] 43 [1.70] H 14 [.6] 3 [.] 14 [.6] 48 [1.90] 39 [1.3] 32 [1.2] 39 [1.3] 32 [1.2] Ø 83 [3.2] 48 [1.90] (4) 3/8-16 UNC, Min. Depth 16 [.62] 1.4 [.0] 1.1 [.04] Spotface Ø 17 [.68] 2 [.07] Min. deep (4) /16-18 UNC, Min. Depth 13 [.0] 4-HOLE, SQURE MOUNT, OFFSET MNIFOLD PORTS, VLVE CVITY 49 [1.94] 33 [1.31] F39 7/8-14 UNF 43 [1.70] H 4 [1.76] 39 [1.3] 91 [3.8] 3 [.] 2 [.06] 48 [1.90] 37 [1.44] 14 [.7] 48 [1.90] 39 [1.3] Dimension H is charted on page. Ø 83 [3.2] 22 [.8] 1.4 [.0] 1.1 [.04] DELIVERIN THE POWER TO ET WORK DONE 43 [1.70] 32 [1.27]

11 RS (0/1 Series) Light Duty Hydraulic Motor housings Dimensions shown are without paint. Paint thickness can be up to 0.13 [.00]. 2-HOLE, SE MOUNT, LINED PORTS 1/2-14 NPT 11 7/8-14 UNF 18 1/2 60 [2.38] 60 [2.38] 1 [2.00] 3.2 [.] I 41 [1.63] 177 [6.96] Ø1.4 [3.992] Ø1.6 [3.999] 46 [1.80] 13.1 [.14] Ø146 [.7] 3 [.] 2 [.06] 2-HOLE, SE MOUNT, SIDE PORTS 70 1/2-14 NPT 71 7/8-14 UNF 78 1/2 177 [6.96] I 41 [1.61] 1 [.60] Ø146 [.7] 3.2 [.] 1 [2.00] 60 [2.38] Ø1.4 [3.992] Ø1.6 [3.999] 31 [1.22] 2 [.98] 13.1 [.14] 60 [2.38] 3 [.] 2 [.06] Dimension I is charted on page. DELIVERIN THE POWER TO ET WORK DONE 11

12 RS (0/1 Series) Light Duty Hydraulic Motor technical information llowable Shaft Load / earing curve The bearing curve below represents the side load capacity of the motor at the centerline of the key for various motor speeds. Operating conditions within the shaded area will maintain acceptable oil film lubrication with recommended fluids. Operating conditions outside the shaded area are susceptible to motor failure due to oil starvation and/or excessive heat generation. Fluids with low lubricity or low viscosity may require the maximum load and speed ratings to be derated to provide acceptable motor life and performance [130] 4000 [900] length & weight charts 0 & 1 series motor weights can vary ± 0. kg [1 lb] depending on model configurations such as housing, shaft, endcover, options etc. Dimension is the overall motor length from the rear of the motor to the mounting flange surface and is referenced on detailed housing drawings listed on pages 8-9. # Length 134 [.29] 138 [.44] 140 [.1] 146 [.7] 144 [.6] 146 [.7] 12 [.97] 18 [6.22] 166 [6.3] 172 [6.76] 190 [7.47] Weight kg [lb] 7.3 [16.1] 7. [16.] 7.6 [16.8] 8.0 [17.7] 7.8 [17.2] 8.0 [17.7] 8.3 [18.2] 8. [18.8] 9.0 [19.8] 9.3 [.].3 [22.7] 00 [40] N [lbf] rpm Dimension H is the overall motor length from the rear of the motor to the mounting flange surface and is referenced on detailed housing drawings listed on page. H # Length 136 [.36] 140 [.0] Weight kg [lb] 6.1 [13.4] 6.3 [13.9] [.8] 6.4 [14.1] thrust load [.82] 14 [.72] 6.9 [1.1] 6.6 [14.6] 148 [.82] 6.9 [1.1] [6.04] 7.0 [1.4] 222 dan [00 lb] [6.29] 167 [6.9] 7.3 [16.0] 7.8 [17.1] [6.83] 8.1 [17.9] [7.4] 9.2 [.2] 44 dan [00 lb] Dimension I is the overall motor length from the rear of the motor to the mounting flange surface and is referenced on detailed housing drawings listed on page 11. I # Length 134 [.29] 138 [.44] Weight kg [lb] 8. [18.6] 8.6 [19.0] [.1] 8.8 [19.3] [.7] 9.2 [.2] [.6] 8.9 [19.7] 146 [.7] 9.2 [.2] [.97] 9.4 [.7] 0 18 [6.22] 9.7 [21.3] 166 [6.3].1 [22.3] [6.76]. [23.0] [7.47] 11. [2.2] DELIVERIN THE POWER TO ET WORK DONE

13 RS (0/1 Series) Light Duty Hydraulic Motor shafts 01 7/8 13 Tooth Spline 2mm Straight 16 2mm Straight Extended J J 13 Tooth 16/32 Pitch Std. NSI Spline 28 [1.] 8.0 [.314] 8.0 [.313] 1 [.61] - 6 [.24] 16 - [.21] J [1.218] 29.7 [1.168] Ø22.2 [.874] Ø22.1 [.872] 27.8 [1.094] 27.6 [1.08] Ø2.0 [.984] Ø2.0 [.983] /16-18 UNC, Min. Depth 18 [.70] M8 x 1.2 Min. Depth 18 [.70] Torque: 170 Nm [100 lb-in] Torque: 678 Nm [6000 lb-in] Spline 13 1 Tapered 6.2 [.24] 6.1 [.243] Spline (SE J499 Std.) 2 [1.00] Min. Spline J 37 [1.46] 4.8 [.189] 4.8 [.188] 2 [1.00] 17 [.67] 4 [.16] J 47 [1.86] 19.6 [.770] 18.3 [.7] Ø2.3 [.996] Ø2.2 [.992] 2.3 [.092] Ø2.4 [1.000] Ø2.4 [.999] Ø.6 [.8] Torque: 678 Nm [6000 lb-in] /16-18 UNC Min. Depth 18 [.70] Torque: 6 Nm [800 lb-in] 2 [.09] 1:8 Taper slotted hex nut is standard on this shaft [.37] Pinhole J mounting / shaft length chart Dimension J is the overall distance from the motor mounting surface to the end of the shaft. Torque: 678 Nm [6000 lb-in] 6.4 [.21] Ø2.4 [.999] Ø2.3 [.998] 16 [.63] 9 [.37] - 6 [.2] 16-4 [.19] 37 [1.46] /16-18 UNC Min. Depth 18 [.70] 1 Straight 1 1 Straight Extended J 2 J 26.0 [1.0] 24.6 [.970] dditional shaft length information, if necessary, is noted as J 2 and does not increase or decrease the listed J dimensions in this chart. The overall shaft lengths are already factored into the overall distance from the mounting surface to the end of the shaft. J # SE & Mounts 42 [1.6] 4 [1.76] 4 [1.76] 4 [1.76] [2.16] 7 [2.23] 8 [2.29] 8 [2.29] Square Mounts 40 [1.8] 43 [1.69] 43 [1.69] 43 [1.69] 3 [2.09] [2.16] 6 [2.22] 6 [2.22] J 2 N/ N/ N/ 37 [1.46] 43 [1.70] N/ 1 [1.99] 0 [1.98] 28,2 [1.1] 28,0 [1.1] Ø2.4 [.999] Ø2.3 [.998] Torque: 6 Nm [800 lb-in] /16-18 UNC Min. Depth 18 [.70] DELIVERIN THE POWER TO ET WORK DONE 13

14 RS (0/1 Series) Light Duty Hydraulic Motor ordering information CHOOSE SERIES DESINTION 3. SELECT MOUNT & PORT OPTION 0 Clockwise Rotation 2 cm 3 /rev [3.2 in 3 /rev] 76 cm 3 /rev [4.6 in 3 /rev] 89 cm 3 /rev [.4 in 3 /rev] 3 cm 3 /rev [6.3 in 3 /rev] 111 cm 3 /rev [6.8 in 3 /rev] 7 cm 3 /rev [7.7 in 3 /rev] Counterclockwise Rotation The 0 & 1 series are bi-directional. Reversing the inlet hose will reverse shaft rotation. For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the port of the motor. 2. SELECT DISPLCEMENT OPTION SELECT MOUNT & PORT OPTION Hole, SE Mount, ligned Ports, 1/2-14 NPT 2-Hole, SE Mount, ligned Ports, 7/8-14 UNF 2-Hole, SE Mount, Offset Ports, 1/2 164 cm 3 /rev [.0 in 3 /rev] cm 3 /rev [. in 3 /rev] 24 cm 3 /rev [1. in 3 /rev] 293 cm 3 /rev [17.9 in 3 /rev] 409 cm 3 /rev [24.9 in 3 /rev] 2-Hole, SE Mount, Offset Manifold Ports, 1/2 2-Hole, SE Mount, ligned Manifold Ports, 1/2 Drilled 2-Hole, SE Mount, ligned Ports, 1/2 2-Hole, SE Mount, Offset Ports, Valve Cavity 7/8-14 UNF 2-Hole, SE Mount, Offset Ports, 1/2 (TP) 2-Hole, SE Mount, Offset Manifold Ports, 1/2 (TP) 2-Hole, SE Mount, ligned Manifold Ports, 1/2 Drilled (TP) 2-Hole, SE Mount, ligned Ports, 1/2 (TP) 2-Hole, SE Mount, Side Ports, 1/2-14 NPT 2-Hole, SE Mount, Side Ports, 7/8-14 UNF 2-Hole, SE Mount, Side Ports, 1/2 2-Hole, SE Mount, ligned Ports, 1/2-14 NPT 2-Hole, SE Mount, ligned Ports, 7/8-14 UNF 2-Hole, SE Mount, ligned Ports, 1/2 2-Hole, SE Mount, Side Ports, 1/2-14 NPT (TP) - Tall pilot. Speed sensor option is not available on housings with a tall pilot or SE mounts Hole, SE Mount, Side Ports, 7/8-14 UNF 78 2-Hole, SE Mount, Side Ports, 1/2 F30 4-Hole, Square Mount, ligned Ports, 1/2-14 NPT F31 4-Hole, Square Mount, ligned Ports, 7/8-14 UNF F37 4-Hole, Square Mount, ligned Manifold Ports, 1/2 Drilled F39 4-Hole, Square Mount, Offset Ports, Valve Cavity, 7/8-14 UNF 4. SELECT SHFT OPTION /8 13 Tooth Spline 1 6 Spline, 1/4- Tap 1-9. [.37] Pinhole 1 Straight lack lack, Unpainted Mounting Surface No Paint 2mm Straight 1 Tapered 1 Straight Extended 2mm Straight Extended The 1 & 16 extended shafts are designed for use with one of the speed sensor options listed in STEP 7.. SELECT PINT OPTION Z None Valve Cavity Only 69 bar [00 psi] Relief 86 bar [0 psi] Relief Valve cavity is only available on the 19 & F39 housings. Standard Lock Nut Solid Hex Nut Speed Sensor, Dual, 4-Pin Male Weatherpack Connector Speed Sensor, Dual, 4-Pin M Male Connector Speed Sensor, Single, 3-Pin Male Weatherpack Connector Speed Sensor, Single, 4-Pin M Male Connector None Freeturning SELECT VLVE CVITY / CRTRIDE OPTION C D 7. SELECT N DD-ON OPTION C W X Y Z 8. SELECT MISCELLNEOUS OPTION C E F 4 bar [100 psi] Relief 1 bar [170 psi] Relief 138 bar [00 psi] Relief 14 DELIVERIN THE POWER TO ET WORK DONE

15 North merica White Drive Products, Inc. P.O. ox 17 Hopkinsville, KY. US Phone: Fax: Europe White Drive Products mbh Mannsnetterstrasse 34 D-8814 Opfenbach, ermany Phone: Fax: sia White (China) Drive Products Co., Ltd. 1-8 Ning Zhen ong Lu Zhenjiang, 21, Jiangsu, China Phone: Fax: Delivering The Power To et Work Done! RS Catalog