40, 45 & 47 SHAFTS ONL

Transcription

1 DT (700) Series , 4 & 47 SHAFTS ONLY ALL OTHER SHAFTS (800)24-97 NOTE: Some older model DT 2." bearing motors may use different components than those shown. For assistance in determining service parts for these motors, please contact Technical Support at (270) 88-.

2 SEAL 7002 DUST SEAL DUST SEAL METAL BACKUP SHIM 2 PILOT RING BOLTS (7) TEFLON BACKUP SEAL 3 ITEMS # -9 PILOT RING (.00" DIA.) SHAFT SEAL 4 INCLUDED IN PILOT RING (MM DIA.) PILOT RING SEAL SEAL FRONT HOUSING BEARING BODY SEALS (3) 7002 BEARING SPACER COMMUTATOR SEAL 7 RETAINING WASHER TEFLON BACKUP SEAL 8 SNAP RING O-RING SEAL NOTE: Motors assembled before 9 THRUST WASHER THRUST BEARING REAR HOUSING BEARING MANIFOLD Jan., 994 have low pressure shaft seals. COMMUTATOR ASSEMBLY These motors will lack items 2 and 3 as ENDCOVER PISTON shown in the exploded view drawing. To upgrade PISTON SPRING these motors to the new high pressure shaft seal SPACER configuration, order the kits below. The kit includes a standard PT2 seal kit and a new revision pilot ring that must be used with the new seals. FRONT THRUST WASHER FRONT THRUST BEARING 00 PSI RELIEF VALVE 2000 PSI RELIEF VALVE 3000 PSI RELIEF VALVE For #C2 & C8 housing motors 7002P.-8 UNEF SLOTTED NUT.-8 UNEF SOLID NUT For #E2 & E8 housing motors 7002PY M42 X 3 CASTLE NUT ROTORS, DRIVE LINKS, AND BOLTS WHEN CHANGING MOTOR DISPLACEMENTS, A MATCHING ROTOR, DRIVE LINK, AND BOLT SET MUST BE ORDERED. EXPLODED VIEW DISPLACEMENT STANDARD ROTOR FREETURN ROTOR DRIVE LINK F F F F F K F K K HOUSING S #C2 & C8- STANDARD SAE C MOUNT WITH " PILOT #E2 & E8- STANDARD SAE C MOUNT WITH mm PILOT DT (700) SERIES MOTOR COMPONENTS MISCELLANEOUS S BOLT SET HOUSING SHAFTS AND RELATED COMPONENTS S SHAFT S COME WITH RELATED SHAFT COMPONENTS (i.e. keys, nuts, etc.) TO ORDER INDIVIDUAL SHAFT COMPONENTS (i.e. keys, nuts, bolts, washers or wire rings) USE THE NUMBER FOR EACH INDIVIDUAL PART. EXPLODED VIEW SHAFT KEY NUT BOLT WASHER #3- -/2" TAPERED #4-0MM STRAIGHT #32- -/2" STRAIGHT (EURO) #4-0MM TAPERED #3-40MM STRAIGHT #4-40MM STRAIGHT (S) #40-2-/4" STRAIGHT #47-2-/4" STRAIGHT (S) #42- TOOTH SPLINE #48- TOOTH SPLINE (S) #34- TOOTH SPLINE (EURO) #49- TOOTH SPLINE (S) #30- -/2" STRAIGHT (USA) #23- TOOTH SPLINE #09- TOOTH SPLINE (S) #33- TOOTH SPLINE (USA) SEE MISC. S LIST ABOVE ENDCOVER S (EXPLODED VIEW 2.) ENDCOVER S COME ASSEMBLED WITH EXPLODED VIEW 'S 8, 9, 24 & 2. TO ORDER A RELIEF VALVE FOR THE VALVE CAVITY ENDCOVERS, SEE THE MISCELLANEOUS S LISTING ABOVE FOR RELIEF VALVE #'S. #- 7/8" O-RING REAR PORTS #3- MANIFOLD PORTS, D-SHAPED #- -/" O-RING RADIAL PORTS #2-3/4" BSP.F RADIAL PORTS #- -/" O-RING PARALLEL PORTS #7-3/4" BSP.F PARALLEL PORTS STANDARD ENDCOVER VALVE CAVITY ENDCOVER R R R R INTERNAL DRAIN ENDCOVER D D 70000D D VALVE CAVITY & INTERNAL DRAIN ENDCOVER DR 70000DR DR White Drive Products, Inc. Phone (270) 88- Fax (270) (800) pg 002 Rev..04

3

4

5 DT 40 (740) Series (800) pg 003

6 SEAL CAP SEAL BODY SEALS (4) MANIFOLD SEAL COMMUTATOR SEAL O-RING SEAL BACKUP SEAL CAPSCREW FLANGE CAP ITEMS # - LUG NUT INCLUDED IN DIVIDER PLATE SEAL MANIFOLD COMMUTATOR ASSEMBLY ENDCOVER PISTON PISTON SPRING PSI RELIEF VALVE PSI RELIEF VALVE PSI RELIEF VALVE ROTORS, DRIVE LINKS, AND BOLTS DT (740) SERIES MOTOR COMPONENTS WHEN CHANGING MOTOR DISPLACEMENTS, A MATCHING ROTOR, DRIVE LINK, AND BOLT SET MUST BE ORDERED. EXPLODED VIEW 20 DISPLACEMENT STANDARD ROTOR FREETURN ROTOR DRIVE LINK BOLT SET F F F F F K F K K HOUSING / HUB ASSEMBLY S *NOTE: BECAUSE OF THE SPECIAL TOOLS AND FIXTURES REQUIRED, THE HOUSING/HUB ASSEMBLY IS NOT FIELD SERVICEABLE FOR REPAIR WORK, THE HOUSING/HUB ASSEMBLY MUST BE RETURNED TO THE FACTORY. TO INSURE THE FASTEST POSSIBLE TURN AROUND TIME, PLEASE CONTACT THE WHITE HYDRAULICS TECHNICAL SUPPORT DEPARTMENT AT FOR RETURN INSTRUCTIONS. FOR BREAKDOWN SITUATIONS REQUIRING IMMEDIATE REPAIRS, NEW HOUSING / HUB ASSEMBLIES ARE AVAILABLE FOR IMMEDIATE SHIPMENT. #W2 & W8- HOUSING / HUB ASSEMBLY -.00 Dia. B.C. ENDCOVER S (EXPLODED VIEW 8) ENDCOVER S COME ASSEMBLED WITH EXPLODED VIEW ITEMS #,, &. MISCELLANEOUS S HOUSING TO ORDER A RELIEF VALVE FOR THE VALVE CAVITY ENDCOVERS, SEE THE MISCELLANEOUS S LISTING ABOVE FOR RELIEF VALVE #'S STANDARD VALVE CAVITY INTERNAL DRAIN VALVE CAVITY & INTERNAL ENDCOVER ENDCOVER ENDCOVER DRAIN ENDCOVER #- 7/8" O-RING REAR PORTS #- -/" O-RING RADIAL PORTS #2-3/4" BSP.F RADIAL PORTS #- -/" O-RING PARALLEL PORTS #7-3/4" BSP.F PARALLEL PORTS R 70000R R R D 70000D D DR 70000DR DR White Hydraulics, Inc. Phone (270) 88- Fax (270) EV (800) pg 004