white drive products SERIES HYDRAULIC MOTORS

Transcription

1 white drive products RS SERIES HYDRULIC MOTORS

2 RS overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using power robbing, two-piece rotor set designs with sliding contact points, RS Series motors utilize the patented Roller Stator design. Seven precision rollers for the contact points reduce friction, providing more power and longer life for your application. Each output shaft is custom ground to maintain exact tolerances between the housing and shaft, producing high volumetric efficiencies. Industry standard mounting flanges and output shafts allow the RS Series motors to interchange with competitive designs. whitedriveproducts key features Match Ground Shaft is matched to housing bore to maintain highest volumetric efficiencies. High Pressure Shaft Seal offers superior seal life and performance and eliminates the need for case drain. Pressure Fed earing surface receives positive flow of clean, cool oil. Heavy-Duty Drive Link receives full flow lubrication to provide long life. Roller Stator Motor Design increases efficiency and life by using roller contact versus solid, sliding contact design. Specifications Peak Ratings - 1% of Operation Speed Flow Torque Pressure CODE Displacement rpm lpm [gpm] Nm [lb-in] bar [psi] cc [in 3 /rev] cont. inter. cont. inter. cont. inter. cont. inter. peak [3.2] [730] 95 [840] 1 [1750] 138 [2000] 155 [2250] [4.6] [70] 138 [30] 1 [1750] 138 [2000] 155 [2250] [5.4] [1300] 167 [1480] 1 [1750] 138 [2000] 155 [2250] 0 3 [ 6.3] [14] 61 [16] 169 [1500] 195 [1725] 1 [1750] 138 [2000] 155 [2250] [6.8] [14] 68 [18] 184 [1630] 214 [1900] 1 [1750] 138 [2000] 155 [2250] 5 7 [7.7] [14] 68 [18] 181 [1600] 208 [1850] 3 [1500] 1 [1750] 155 [2250] [.0] [16] 76 [20] 222 [1970] 265 [2350] 3 [1500] 1 [1750] 155 [2250] [.5] [16] 76 [20] 297 [2640] 345 [3050] 3 [1500] 1 [1750] 155 [2250] [15.5] [20] 91 [24] 287 [2540] 344 [3040] 86 [50] 4 [1500] 1 [1750] [17.9] [20] 91 [24] 277 [2460] 350 [30] 69 [00] 86 [50] 3 [1500] [24.9] [20] 91 [24] 377 [3350] 463 [40] 69 [00] 86 [50] 3 [1500] 2

3 whitedriveproducts RS Performance [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 52 cc [3.2 in 3 /rev.] [89] 15 [133] 25 [223] 35 [92] [163] [253] 69 [90] [181] [274] 142 [85] [154] [251] [168] [243] [148] [243] [119] [218] [290] [348] [366] [355] [342] [318] [307] [375] [438] [464] 7 53 [465] [445] [417] [429] [435] 59 [523] [556] 3 65 [572] [549] [526] [499] [483] [653] 78 [690] [669] 86 [764] [656] 85 [755] [631] [593] [7] 29 [255] 43 [382] 58 [5] 72 [637] 86 [764] 1 [892] 115 [19] [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 76 cc [4.6 in 3 /rev.] [7] 26 [227] 39 [341] 25 [1] [252] [381] [2] [260] [405] [263] [416] [252] [403] [221] [379] [341] [314] [456] 9 59 [522] [560] [574] [562] [555] [502] [446] [509] 5 75 [661] [707] [726] [721] [703] [657] [625] [720] [848] [871] [869] [860] [819] [816] [973] 115 [16] [46] 134 [1184] [20] 134 [1183] [14] 132 [1172] [980] 8 [1135] [932] [183] 41 [366] 62 [549] 83 [732] 3 [916] 4 [99] 145 [82] 166 [1465] [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 89 cc [5.4 in 3 /rev.] 23 [206] 43 [376] 63 [559] 84 [743] 98 [864] 5 [933] [383] [566] [760] 8 [953] 1 7 [13] [388] [561] [739] 32 6 [937] 25 7 [11] [538] [754] 75 4 [920] 66 8 [1134] [720] [902] [15] [686] [867] [80] [824] [04] [715] [766] [25] 151 [1336] [1309] [75] [51] [] [998] [1495] [1484] [1450] [1448] [1422] [215] 49 [430] 73 [645] 97 [860] 1 [75] 146 [90] 170 [1505] 194 [1720] 3

4 RS Performance whitedriveproducts 0 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 3 cc [6.3 in 3 /rev.] 53 [14] 61 [16] 25 [221] 52 [461] 76 [676] 98 [870] 115 [20] [233] [449] [680] 3 [914] 7 6 [1116] 146 [95] [433] [682] 32 1 [893] 28 5 [18] [1331] [648] [873] 65 3 [88] [91] [606] [830] 4 0 [62] [79] [789] [999] [54] [693] [905] [14] [755] [49] [746] [40] [957] [1473] 151 [1336] [1538] 199 [1758] [1504] 195 [1721] [1463] 194 [1717] [1429] 187 [1658] [1380] 182 [16] [99] 172 [1526] [1198] 141 [50] [1197] [251] 57 [502] 85 [752] 113 [03] 142 [54] 170 [1505] 198 [1756] 227 [2006] 1 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 111 cc [6.8 in 3 /rev.] 53 [14] 61 [16] 68 [18] 26 [227] 54 [481] 78 [689] 0 [888] 9 [961] [253] [489] [733] 7 1 [974] [1183] 153 [1356] [503] [727] 26 1 [969] [1199] 162 [1431] [479] [706] 60 7 [951] [1190] [1437] [669] 8 6 [934] 0 9 [1144] [1357] [621] [862] [92] [1336] [779] [25] [94] [764] [963] [26] [901] [1142] [844] [75] [984] [1631] 180 [1590] [1643] 216 [1911] [1636] 206 [1826] [1569] 202 [1788] [1505] 201 [1783] [1482] 190 [1683] [1378] 184 [1626] [97] [05] [271] 61 [541] 92 [8] 2 [83] 153 [1354] 184 [1624] 214 [1895] 245 [2166] 4

5 whitedriveproducts RS Performance 7 cc [7.7 in 3 /rev.] 5 53 [14] 61 [16] 68 [18] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 29 [225] 60 [534] 86 [758] 1 [990] 9 [1145] [251] 61 [537] 61 [538] 87 [771] 82 [722] 5 [927] 97 [859] 89 [787] 99 [879] 0 [885] 62 [545] 92 [816] 90 [797] 117 [32] 1 [987] 137 [14] 0 [66] 119 [51] 131 [1163] 119 [53] 93 [819] 5 [13] 3 [84] 149 [1321] 142 [57] 167 [1474] 157 [1386] 146 [95] 1 [73] 153 [1356] 151 [1338] 177 [1566] 175 [1548] 194 [1720] 183 [1622] 174 [1536] 149 [1319] 182 [1609] 181 [1602] 208 [1838] 201 [1781] 173 [1531] 2 [1856] 2 [1860] 176 [1559] [307] 69 [613] 4 [920] 139 [26] 173 [1533] 208 [1839] 242 [2146] 164 cc [.0 in 3 /rev.] [14] 61 [16] 68 [18] 76 [20] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 32 [281] 71 [630] 3 [908] 141 [47] 167 [1481] [308] 36 [320] 72 [633] 69 [608] 65 [573] 95 [837] 83 [736] 73 [643] 2 [901] 93 [824] 111 [980] 76 [677] 78 [694] 114 [07] 9 [961] 4 [921] 134 [1184] 4 [95] 114 [] 142 [55] 7 [11] 152 [1348] 111 [983] 116 [23] 155 [1375] 149 [1318] 139 [33] 173 [1531] 162 [1432] 154 [1366] 179 [1585] 164 [1447] 141 [45] 159 [1403] 190 [1679] 188 [1667] 181 [1597] 2 [1874] 203 [1796] 194 [1714] 219 [1936] 182 [1615] 193 [1707] 226 [1998] 224 [1979] 219 [1941] 251 [2220] 241 [2133] 231 [2045] 211 [1867] 223 [1974] 262 [2319] 267 [2359] 258 [2284] 234 [2070] 257 [2279] [398] 90 [796] 135 [1194] 180 [1592] 225 [1990] 270 [2389] 315 [2787] 5

6 RS Performance whitedriveproducts 205 cc [.5 in 3 /rev.] [14] 61 [16] 68 [18] 76 [20] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 47 [414] 96 [846] 141 [50] 183 [1621] 224 [1983] [432] 47 [416] 43 [380] 90 [795] 83 [734] 75 [666] 116 [26] 97 [862] 85 [752] 2 [79] 4 [924] 98 [865] 5 [927] 96 [849] 149 [1322] 139 [28] 8 [1134] 167 [1475] 153 [1358] 137 [] 174 [1541] 154 [1366] 154 [1360] 157 [1386] 152 [1349] 194 [1721] 192 [1697] 175 [1546] 217 [1924] 205 [1811] 191 [1687] 224 [1981] 207 [1833] 196 [1732] 204 [1809] 203 [1798] 249 [2207] 238 [22] 227 [2013] 262 [2322] 251 [2218] 240 [27] 241 [2136] 245 [2166] 249 [2204] 298 [2634] 296 [2621] 280 [2482] 316 [2795] 300 [2656] 292 [2583] 284 [2517] 299 [2642] 298 [2641] 340 [3007] 339 [2997] 329 [29] 318 [2811] 341 [3019] 350 [3094] [498] 1 [995] 169 [1493] 225 [1990] 281 [2488] 337 [2986] 394 [3483] 254 cc [15.5 in 3 /rev.] [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 52 [457] 4 [919] 150 [1327] 6 52 [458] 4 1 [988] [1491] [490] 115 [18] 171 [15] [437] [28] [1517] [398] 58 5 [930] [1440] [795] [1305] [676] [53] [225] [98] [784] [722] [1966] 267 [2361] 300 [2658] [2041] [2547] [2856] [2064] [2551] [3040] [1966] [25] [3051] [1649] [2372] [2918] [1738] [2263] [2754] [1642] [2071] [2499] [1386] [1962] [2460] [56] [1786] [2306] [96] [1618] [26] [842] [1387] [1919] [1147] [874] [617] 139 [34] 209 [1851] 279 [2468] 349 [3085] 418 [3702] 6

7 whitedriveproducts RS Performance [250] 35 [500] 52 [750] 69 [00] 86 [50] 293 cc [17.9 in 3 /rev.] 53 [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 58 [516] 6 [1111] 185 [1638] 5 64 [563] 5 4 [96] [1673] 64 [564] 133 [1180] [1758] [524] [1193] [1773] [468] 51 6 [1116] [1728] [954] [1650] 2 0 [887] [1503] 8 79 [698] [1381] [558] [06] [00] [2325] 329 [29] [2375] 343 [3033] [2384] 355 [3145] [2463] 350 [3096] [2218] 339 [3000] [2132] 319 [2824] [1944] 301 [2660] [1780] 284 [25] [1630] 250 [2213] [1382] 216 [1915] [54] 190 [1679] [738] [713] 161 [1425] 242 [2138] 322 [2850] 403 [3563] 409 cc [24.9 in 3 /rev.] [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 87 [767] 187 [1656] [793] 180 [1597] [777] 175 [1550] [753] 177 [1565] [631] 169 [1498] [516] 158 [1396] [47] [42] 1 89 [792] 9 59 [520] [2425] 369 [3270] 446 [3951] [2528] [3309] [44] [2540] [3384] 469 [4153] [2477] [3273] [42] [2274] [3119] [3901] [23] [2906] [3837] [1989] [2682] [3613] [1670] [2463] [3251] [1359] [2204] [2954] [27] [1934] [2746] [790] [1663] [2336] [42] [824] [991] 224 [1982] 336 [2974] 448 [3965] 560 [4956] 7

8 RS whitedriveproducts NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 200 & 201 Series housings (SE Mounts) 2-Hole 1/2 NPT ligned Ports 11 2-Hole 7/8 O-Ring ligned Ports 18 2-Hole 1/2 SP.F ligned Ports 68 2-Hole 1/2 SP.F ligned Ports* 40 [1.89 ] 52 [2.03] 41 [1.63] 40 [1.89 ] *2,7 [.6] *2,8 [.1] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 46 [1.80] 23 [.90] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] NOTE: Dimension is found on page. * Pilot height is 5,2 [.205] - 5,3 [.2] for the 62, 67, & 68. ** For the 67 the four mounting holes are M8 x 1.25 at same depth. 2-Hole 1/2 SP.F Offset Ports 62 2-Hole 1/2 SP.F Offset Ports* 3 [.] 2 [.06] 40 [1.89 ] 52 [2.03] 40 [1.89 ] *2,7 [.6] *2,8 [.1] 35 [1.36] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] 3 [.] 2 [.06] 71 [2.78] 17 2-Hole 1/2 Manifold Ports 67 2-Hole 1/2 Manifold Ports* 40 [1.89 ] 40 [1.89 ] 47 [1.85] *2,7 [.6] *2,8 [.1] 39 [1.54] 14 [.56] 14 [.56] 132 [5.19] 32 [1.25] 23 [.90] Ø82,5 [3.249] Ø82,3 [3.242] 32 [1.25] 23 [.90] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] 3 [.] 2 [.06] (2) Ø 1/2-19 [.073] Deep **(4) 5/16-18 UNC (13 [.5] Deep Min.) 8

9 whitedriveproducts RS 200 & 201 Series housings (SE Mounts) NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 13 2-Hole 1/2 SP.F Manifold Ports 63 2-Hole 1/2 SP.F Manifold Ports* 40 [1.89 ] 40 [1.89 ] 47 [1.85] 35 [1.36] *2,7 [.6] *2,8 [.1] 36 [1.42] 20 [.79] 20 [.79] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] NOTE: Dimension is found on page. * Pilot height is 5,2 [.205] - 5,3 [.2] for the [.79] 20 [.79] (4) M8 x 1.25 (8 [.30] Deep Min.) 70 2-Hole 1/2 NPT Side Ports 71 2-Hole 7/8 O-Ring Side Ports 72 2-Hole 1/2 SP.F Side Ports 57 [2.23] 132 [5.19] 41 [1.63] Ø6,3 [4.187] 52 [2.03] 2,7 [.6] 2,8 [.1] 40 [1.89 ] 31 [1.22] Ø82,5 [3.249] Ø82,3 [3.242] 25 [.98] 13,3 [.522] 13,1 [.514] 40 [1.89 ] 19 2-Hole 7/8 O-Ring Offset Ports With Valve Cavity 40 [1.56] 33 [1.28] 13,3 [.522] 13,1 [.514] 2,7 [.6] 2,8 [.1] 91 [3.58] 37 [1.44] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 35 [1.36] 40 [1.89 ] 52 [2.03] 71 [2.78] 9

10 RS whitedriveproducts NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 200 & 201 Series housings (4-hole square mounts) F30 4-Hole 1/2 NPT ligned Ports F31 4-Hole 7/8 O-Ring ligned Ports 45 [1.76] 49 [1.94] 39 [1.53] 39 [1.53] 3 [.] 2 [.06] 43 [1.69] 48 [1.90] 39 [1.53] 23 [.90] 39 [1.53] 23 [.90] Ø 83 [3.25] 48 [1.90] NOTE: Dimension is found on page. (4) 3/8-16 UNC-2 16 [.62] Min. Deep 1,4 [.055] 1,1 [.045] F37 4-Hole Manifold Ports 39 [1.53] 45 [1.76] 49 [1.94] 39 [1.53] 2 [.06] 43 [1.70] 14 [.56] 3 [.] 14 [.56] 48 [1.90] 39 [1.53] 32 [1.25] 23 [.90] 39 [1.53] 32 [1.25] 23 [.90] Ø 83 [3.25] 48 [1.90] (4) 3/8-16 UNC-2 16 [.62] Min. Deep 1,4 [.055] 1,1 [.045] (2) Ø 1/2 Port Ø 17 [.68] Spotface x 2 [.07] Deep (4) 5/16-18 UNC -13 [.50] Deep F39 4-Hole 7/8 O-Ring Offset Ports With Valve Cavity 49 [1.94] 33 [1.31] 43 [1.70] 45 [1.76] 39 [1.53] 91 [3.58] 3 [.] 2 [.06] 48 [1.90] 37 [1.44] 14 [.57] 48 [1.90] 22 [.85] 39 [1.53] Ø 83 [3.25] 1,4 [.055] 1,1 [.045] 43 [1.70] 75 [2.97]

11 whitedriveproducts RS 200 & 201 Series housings (SE mounts) NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 2-Hole 1/2 NPT ligned Ports 11 2-Hole 7/8 O-Ring ligned Ports 18 2-Hole 1/2 SP.F ligned Ports 60 [2.38] 60 [2.38] C 51 [2.00] 3,2 [.5] 41 [1.63] Ø1,4 [3.992] Ø1,6 [3.999] 177 [6.96] 46 [1.80] 23 [.90] Ø146 [5.75] 3 [.] 13,3 [.522] 13,1 [.514] 2 [.06] 70 2-Hole 1/2 NPT Side Ports 71 2-Hole 7/8 O-Ring Side Ports 72 2-Hole 1/2 SP.F Side Ports 177 [6.96] 56 [2.21] C 41 [1.61] Ø146 [5.75] 3,2 [.5] 60 [2.38] 31 [1.22] Ø1,4 [3.992] Ø1,6 [3.999] 25 [.98] 60 [2.38] 13,3 [.522] 13,1 [.514] 51 [2.00] NOTE: Dimension C is found on page. 11

12 RS 200 & 201 Series technical information earing Curve: The bearing curve below represents the side load capacity of the motor at the centerline of the key for various motor speeds dan RPM lbs. whitedriveproducts LENGTH / WEIGHT CHRT SE Mount - Dimension Code mm [in] kg [lb] [5.29] 7,3 [16.1] [5.44] 7,5 [16.5] [5.51] 7,6 [16.8] [5.75] 8,0 [17.7] [5.65] 7,8 [17.2] [5.75] 8,0 [17.7] [5.97] 8,3 [18.2] [6.22] 8,5 [18.8] [6.53] 9,0 [19.8] [6.76] 9,3 [20.5] [7.47],3 [22.7] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration. allowable side load Operating conditions within the shaded area will maintain acceptable oil film lubrication with recommended fluids. Operating conditions outside the shaded area are susceptible to motor failure due to oil starvation and/or excessive heat generation. Fluids with low lubricity or low viscosity may require the maximum load and speed ratings to be derated to provide acceptable motor life and performance. Thrust Load 222 dan [500 lbs] LENGTH / WEIGHT CHRT Square Mount - Dimension Code mm [in] kg [lb] [5.36] 6,1 [13.4] [5.50] 6,3 [13.9] [5.58] 6,4 [14.1] [5.82] 6,9 [15.1] [5.72] 6,6 [14.6] [5.82] 6,9 [15.1] [6.04] 7,0 [15.4] [6.29] 7,3 [16.0] [6.59] 7,8 [17.1] [6.83] 8,1 [17.9] [7.54] 9,2 [20.2] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration. 445 dan [00 lbs] LENGTH / WEIGHT CHRT SE Mount - Dimension C Code mm [in] kg [lb] [5.29] 8,5 [18.6] [5.44] 8,6 [19.0] [5.51] 8,8 [19.3] [5.75] 9,2 [20.2] [5.65] 8,9 [19.7] [5.75] 9,2 [20.2] [5.97] 9,4 [20.7] [6.22] 9,7 [21.3] [6.53],1 [22.3] [6.76],5 [23.0] [7.47] 11,5 [25.2] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration.

13 whitedriveproducts RS 200 & 201 series shafts 05 1 Pinhole 1 Straight 15 1 Straight Extended Torque: 678 Nm [6000 lb-in] D 37 [1.45] Mounting Flange Torque: 655 Nm [5800 lb-in] 6,4 [.251] 6,4 [.250] 26,0 [1.020] 24,6 [.970] 18 [.70] Min. D *39 [1.52] Mounting Flange 16 [.63] **6 [.25] Ø25,4 [.999] Ø25,3 [.998] 30 28,2 [1.1] 28,0 [1.1] Ø25,4 [.999] Ø25,3 [.998] 30 9 [.37] 5/16-18UNC 6,4 [.251] 6,4 [.250] 5/16-18 UNC NOTE: * For 15 shaft add 13 [.53] ** For 15 shaft substract 2 [.07] 13 1 Tapered 25mm Straight 16 25mm Straight Extended Torque: 655 Nm [5800 lb-in] 4,8 [.189] 4,8 [.188] 25 [1.00] 17 [.67] 4 [.16] D 47 [1.86] Mounting Flange 19,6 [.770] 18,3 [.720] Torque: 678 Nm [6000 lb-in] 8,0 [.314] 8,0 [.313] 18 [.70] Min. **6 [.24] D *45 [1.77] Mounting Flange 30,9 [1.218] 29,7 [1.168] 2,3 [.092] 4,8 [.189] 4,8 [.188] Ø25,4 [1.000] Ø25,4 [.999] 2 [.09] 3/4-28 Slotted Nut 1-1/8 cross Flats 1:8 Taper 15 27,8 [1.094] 27,6 [1.085] 7,0 [.277] 7,0 [.276] Ø25,0 [.984] Ø25,0 [.983] M8 x NOTE: * For 16 shaft add 7 [.28] ** For 16 shaft substract 1 [.03] Tooth Spline Torque: 170 Nm [1500 lb-in] Spline Torque: 429 Nm [3800 lb-in] D 37 [1.46] Mounting Flange 18 [.71] D Mounting Flange 6,2 [.245] 6,1 [.243] 25 [1.00] Min. 18 [.70] Min. Ø22,2 [.874] Ø22,1 [.872] 30 Ø25,3 [.996] Ø25,2 [.992] Tooth 16/32 Pitch Std. NSI Spline 5/16-18 UNC-2 Ø 20,6 [.8] Spline (SE J499 Std.) 5/16-18 UNC MOUNTING FLNGE TO SHFT END - Dimension D Code SE Mounts Square Mounts SE Mounts [1.65] 40 [1.58] 42 [1.65] [1.76] 43 [1.69] 45 [1.76] [1.76] 43 [1.69] 45 [1.76] 45 [1.76] 43 [1.69] 45 [1.76] 54 [2.13] 52 [2.06] 54 [2.13] [2.24] 55 [2.17] 57 [2.24] [2.29]* 56 [2.22]** 58 [2.29] [2.29]* 56 [2.22]** 58 [2.29] NOTE: Shaft lengths vary ± 0,8 mm [.030 in.]. * Subtract 18,5 [.730] when a sensor flange is ordered. ** Subtract 17,0 [.670] when a sensor flange is ordered. 13

14 RS 200 & 201 series model code uilder whitedriveproducts SERIES DISPLCEMENT HOUSING SHFT PINT CVITY DD ON MISCELLNEOUS STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8 STEP 1 - Select a series Clockwise Rotation Counterclockwise Rotation STEP 2 - Select a displacement option STEP 3 - Select a housing option NOTE: For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the port of the motor. To obtain the desired direction of shaft rotation, use the graphic above to determine the rotation code for the motor. For bi-directional applications, the 200 series is recommended. Preferred rotation is based on rotor timing. Changing preferred direction requires no additional parts. 52 cc [3.2 in3/rev] 76 cc [4.6 in3/rev] 89 cc [5.4 in3/rev] 3 cc [6.3 in3/rev] 111 cc [6.8 in3/rev] 7 cc [7.7 in3/rev] Hole 1/2" NPT ligned Ports (S) 2-Hole 7/8" O-ring ligned Ports (S) 2-Hole 1/2" SP.F Offset Ports (S) 2-Hole1/2" SP.F Offset Manifold (S) 164 cc [.0 in3/rev] 205 cc [.5 in3/rev] 254 cc [15.5 in3/rev] 293 cc [17.9 in3/rev] 409 cc [24.9 in3/rev] 2-Hole Manifold Ports (S) 2-Hole 1/2" SP.F ligned (S) 2-Hole 7/8" O-ring With Valve Cavity (S) 2-Hole 1/2" SP.F Offset w/.200 Pilot 2-Hole 1/2" SP.F Offset Manifold w/.200 Pilot 2-Hole Manifold Ports w/.200 Pilot 2-Hole 1/2" SP.F ligned w/.200 Pilot 2-Hole 1/2" NPT Side Ports (S) 2-Hole 7/8" O-ring Side Ports (S) 2-Hole 1/2" SP.F Side Ports (S) 2-Hole SE Flange 1/2" NPT ligned 2-Hole SE Flange 7/8" O-ring ligned 2-Hole SE Flange 1/2" SP.F ligned 2-Hole SE Flange 1/2" NPT Side Ports 2-Hole SE Flange 7/8" O-ring Side Ports 2-Hole SE Flange 1/2" SP.F Side Ports STEP 3 (Continued) - Select a housing option F30 F31 F37 F39 4-Hole 1/2" NPT ligned Ports (S) 4-Hole 7/8" O-ring ligned Ports (S) 4-Hole Manifold Ports (S) 4-Hole 7/8" O-Ring W/Valve Cavity (S) STEP 4 - Select a shaft option STEP 5 - Select a paint option Z lack lack (unpainted flange face) No Paint STEP 6 - Select a valve cavity option C D E F G STEP 8 - Select a miscellaneous option C 7/8" 13 Tooth 1" 6- Spline 1" Pinhole 1" Straight None Freeturning Rotor None Relief Valve Cavity 69 bar [00 psi] Relief Valve Installed 86 bar [50 psi] Relief Valve Installed 4 bar [1500 psi] Relief Valve Installed 1 bar [1750 psi] Relief Valve Installed 138 bar [2000 psi] Relief Valve Installed NOTE: Valve cavity option is only available on the 19 and F39 housings. STEP 7 - Select an add on option C W X Y Z 25mm Straight 1" Tapered 1" Straight Ext. (S) 25mm Ext. (S) Standard Lock Nut Solid Hex Nut 4-Pin Dual Male Weatherpack Connector (S) 4-Pin M Dual Male Connector (S) 3-Pin Single Male Weatherpack Connector (S) 4-Pin M Single Male Connector (S) NOTE: (S) - STEP 3 Housings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options. 14

15 Important Information efore selecting or using a White Drive Products product, it is important that all information concerning the product warranty, limitation of liability and responsibility of the customer be reviewed. This information is located below. Please direct any questions regarding this information to your White Drive Products representative. Disclaimer This catalog provides product options for further investigation by customers having technical expertise with respect to the use of such products. It is the responsibility of the customer to thoroughly analyze all aspects of the customer s application and to review the information concerning the product in the current product catalog. Due to the diversity of possible applications, the customer is solely responsible for making the final selection of the product(s) to be used and to assure that all performance, safety and warning requirements of the application are met. The customer is further responsible for all testing to verify acceptable life and performance of White Drive Products products under actual operating conditions. White Drive Products has made all reasonable efforts to present accurate information in this catalog and shall not be responsible for any incorrect information which may result from unintentional oversight. Due to continuous product improvement, the product specifications as stated in this catalog are subject to change by White Drive Products at any time without notice. The customer should consult a sales representative of White Drive Products for detailed information and to determine any changes in the information in this catalog. Improper selection or improper use of the products described herein can result in death, personal injury and/or property damage. White Drive Products, Inc. s sole responsibility with respect to its products is set forth in the warranty/limitation of liability policy state herein. Warranty White Drive Products products are sold subject to a limited warranty and a limitation of remedies policy, both of which constitute part of any and all agreements to purchase White Drive Products products. White Drive Products makes no other warranties or promises other than those specifically noted in its written policies, and no White Drive Products employee or agent has the power to alter those policies other than in writing. other fine products available from white drive products a complete range of lsht hydraulic motors hydraulic controlled pressure released brakes

16 Delivering The Power To Get Work Done. United States White Drive Products, Inc. P.O. ox 17 Hopkinsville, KY. US Phone: Fax: Germany White Drive Products GmbH Mannsnetterstrasse 34 D Opfenbach, Germany Phone: Fax: infoeu@whitedriveproducts.com China White (China) Drive Products Co., Ltd. 1-8 Ning Zhen Gong Lu Zhenjiang, 2021, Jiangsu, China Phone: Fax: infochina@whitedriveproducts.com RS Series Catalog - rev. 3..