LSHT Torqmotors TM and Nichols TM Motors zm08 TK Series

Size: px

Start display at page:

Download "LSHT Torqmotors TM and Nichols TM Motors zm08 TK Series"

Jocelin Carpenter
6 years ago
Views:

Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Cont. Int.

1 Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen cm 3 /rev Cylindrée 7 Despazamientos Cont. Int. Maximum Pressure (to 35 ) (to 45 ) Eingangsdruck Pression entrée Pressione in entrata zm8 HY /,EU Exceptional Strength and Durability in a High Performance Motor The heart of Parker s powertrain, the torque link, is an extra heavy duty part that includes patented 6:4 spline geometry. Rugged construction throughout allows the transmission of over 23, lb-in of torque. The entire powertrain is continually washed in cool, high flow fluid to assure long life. Roller vanes and sealed commutator maintain high efficiency and provide smooth low speed performance. Maximum Oil Flow Schluckstrom Débit d huile Portata (to 6 gpm) lpm Maximum Speed (523 rpm) Drehzahl 523 rpm Velocità di rotazione Vitesse de rotation Cont. Int. Maximum Torque (2136 lb in) (2354 lb in) MaxDrehmoment 2413 Nm 266 Nm Couple Coppia Maximum Side Load at Key Seitenlast Charges latèrales Carico radiale (to 59 lb) N pp SD.p65 15 Parker Hannifin Corporation

2 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU Motor Series TK cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen Cylindrée Despazamientos rev/min cont / int* l/min g/min Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion Max. torque Max. Drehmoment Couple maxi Torque Maximo Max. Max. intermittent flow Max. Drehzahl Intermittierender Betrieb: Velocità di rotazione max Fonctionnement intermittent: Velocidad maxima a caudal intermitente maximo Max. oil flow Max. Schluckstrom Débit d huile maxi Caudal Maximo de Aceite cont / int* Max. differential pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima max cont / int* Nm lb-in max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo redinmiento Min. starting torque Min. Anlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque TK TK TK TK TK TK TK Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. pp SD.p Parker Hannifin Corporation

3 Ordering Information / Bestellschlüssel System de Commande / Imformacion para pedidos HY /,EU TK XXXX X5 XX XXXX Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting/Rear Ports Gehäuse/Endanschluß Carter/Alimentazione Laterale Montaje/Orifices arriér Shaft Welle Arbre Ejes Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /tr cm 3 /giro Code cm 3 /U cu in 3 /rev / / / / / / / 61. Code K5 Mounting Standard SAE CC, 1 5/16-12 SAE Rear Radical Code Shaft 1 1/2" Keyed /2" 17 Tooth 12/24 Spline 1 3/4" Tapered 4mm Keyed Code Rear Port Rotation Standard Code AAAB AAAA B A No Paint No lackiert Black Paint Schwarz lackiert Wheel Mount, 1 5/16-12 SAE Rear Radical T5 Consult factory for other available options, configurations ordering codes and lead times. pp SD.p Parker Hannifin Corporation

4 Ordering Information / Bestellschlüssel System de Commande / Imformacion para pedidos HY /,EU pp SD.p Parker Hannifin Corporation

5 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TK 25 TK TK Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp SD.p65 Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 154 Parker Hannifin Corporation

6 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TK TK 63 TK Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp SD.p65 Intermittierende Werte maximal 1% von jeder Betriebsminute. Caacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 155 Parker Hannifin Corporation

7 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TK Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. pp SD.p Parker Hannifin Corporation

8 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial HY /,EU Flange Mount / Standardgehäuse Monture à bride(s) / Montaje de brida Side Load - N (lbs) 71,171 (16,) 62,275 (14,) 53,378 (12,) 44,482 (1,) 35,584 (8,) 26,688 (6,) 17,792 (4,) 8,896 (2,) (-3) -5.8 (-2) (-1) () Max Load Curve 25.4 (1) 5.8 (2) Dynamic Load Curve 76.2 (3) 11.6 (4) (5) (6) Distance from Mounting Face - mm (in) Motor Image Not To Scale The dynamic side load curve is based on uni-directional steady state loads for L 1 bearing life at 12 x 1 1 RPM revolutions. Die zulaessige auslege radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhaltnissen auf eine L 1 Lebensdauer mit 12 x 1 6 Umdrehungen kalkuliert bei 1 min. La courbe de charge laterale permise se base sur des charges unidirectionnelles en regime permanent pour le roulement L 1 a 12 x 1 1 RPM revolutions. La curva de valores admisibles de carga lateral esta basada en cargas contantes para cojinetes L 1 a 12 x RPM. Side Load - N (lbs) 71,171 (16,) 62,275 (14,) 53,378 (12,) 44,482 (1,) 35,584 (8,) 26,688 (6,) 17,792 (4,) 8,896 (2,) (-1) Equation to Calculate the Expected Radial Bearing Life Gleichung zur Ermittlung der Lagerlebensdauer Equation to calculate the dynamic bearing life for a given load: Bestimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last Wheel Mount / Radnabengehäuse Monture à roue / Montaje de rueda () 25.4 (1) 5.8 (2) 76.2 (3) 11.6 (4) 127. (5) (6) (7) 23.2 (8) Distance from Mounting Face - mm (in) Motor Image Not To Scale The maximum load curve is defined by bearing static load capacity. This curve should not be exceeded at any time including shock loads. Die maximale radiale Wellenbelastungskurve ist definiert als maximale statische Last ohne Drehzahl. Sie gilt als Grenze und sollte keinesfalls überschritten werden. La courbe de charge maximale est définie par la capacité de charge statique portante. Cette courbe ne devrait être dépassée en aucun moment y compris pour les charges par à-coups. La curva de carga máxima queda definida por la capacidad de carga estática del cojinete. No se deben superar los valores de esta curva, ni siquiera con cargas provisorias de impacto. Use F a, F b and S in equation to determine hours of L 1 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b und S in die nachstehende Formel. L = 12 x 1 6 { F a} x S F b Where / Mit: S = Shaft Speed RPM / Abtriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = Allowable side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = Application side load. / Anwendungsseitige Wellenbelastung Note: Calculations are based on L 1 bearing life per ISO 281. Auslegung basiert auf einer L 1 Lenbendauer nach ISO 281. Max Load Curve Dynamic Load Curve pp SD.p Parker Hannifin Corporation

9 Mounting,Ports/Gehäuse,Anschlüße Carter,Orifices / Montaje,Lumbreras HY /,EU Code: K5 Standard SAE CC, 1 5/16-12 SAE Rear Radial "L" 87.6 (3.45) 33.3 (1.31) 22.8 (.9) 45 ø15.9 (5.94) Max (2.45) (1.23) A B ø127. (5.) (4.995) A B ø (6.375) 4 x 9 1 5/16-12 STR THD O Ring Ports 11.6 (.46) ø (.565) 9/16 Thru Holes Code K5 disp Weight/Gewicht kg Poids/Peso (lb) (7.6) (72.) (73.8) (76.) (78.8) (82.1) (86.3) Length "L" mm "L" (in) (1.9) (11.1) (11.4) (11.7) (12.2) (12.7) (13.4) Code: T5 Wheel Mount, 1 5/16-12 SAE Rear Radial 87.6 (3.45) 33.3 (1.31) "L" 22.8 (.9) 99.5 (3.95) (3.795) 45 ø15.9 (5.94) Max (2.45) (1.23) A B ø139.7 (5.5) (5.495) A B ø (7.25) 4 x 9 1 5/16-12 STR THD O Ring Ports (.478) ø (.565) 9/16 Thru Holes Code T5 disp Weight/Gewicht kg Poids/Peso (lb) (67.9) (69.3) (71.1) (73.3) (76.1) (79.4) (83.5) Length "L" mm "L" (in) (7.5) (7.7) (8.) (8.4) (8.8) (9.4) (1.1) English equivalents for metric specifications are shown in ( ). pp SD.p Parker Hannifin Corporation

10 HY /,EU pp SD.p Parker Hannifin Corporation

11 Shafts / Abtriebswellen Arbre / Ejes HY /,EU Code K Code T Code: /2" Keyed 77.5 (3.5) (6.39) Code: /2" 17 Tooth 12/24 Spline 72.9 (2.87) (6.2) Code: /4" Tapered 91.9 (3.62) (6.96) Code: 64 4mm Keyed 93.2 (3.67) (6.99) English equivalents for metric specifications are shown in ( ). pp SD.p65 16 Parker Hannifin Corporation

12 Shafts / Abtriebswellen Arbre / Ejes HY /,EU / 9.5 (.373 /.374) Code: /2" Keyed 6.3 (2.373) 38.7 / 38.1 (1.499 / 1.5) _ 3/8-16 UNC v18.54 (.73) Min (1.647) Code: / 38.1 (1.473 / 1.5) 1 1/2" 17 Tooth 12/24 Spline _ 3/8-16 UNC v18.54 (.73) Min (1.395) Min Full Spline 3.18 / 3.3 (.125 /.137) / 33.2 (1.285 / 1.37) Code: (2.125) 1 3/4" Tapered 77. (3.3) 5.49 (.216) / (.438 /.44) (1.75) Torque to Max. 61Nm (45 Ft Lb) See installation instructions Code: 64 4mm Keyed UNEF 1: (2.9) Min / 4.18 ( / ) / (.464 /.469) M12 _ x H v1. Min (1.688) English equivalents for metric specifications are shown in ( ). pp SD.p Parker Hannifin Corporation

Technical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TK Series / Serie / Série

Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Maximum Pressure ( psid)