Motors & Pumps- Hydraulic Pumps, Motors & Power Units
|
|
- Phoebe Harrison
- 5 years ago
- Views:
Transcription
1 - Hydraulic umps, Motors & ower Units - Rapid Response Hydraulic umps - Check Valves Hydraulic umps - ower Units MOTORS & UMS Hydraulic umps - Vane ump Motors If you can t find it, your local arker distributor can! Just because it s not in our catalog doesn t mean you can t get it. To find exactly what you need, contact your local arker distributor today. We can often provide 24-hour delivery direct from our factories to over 12,000 distribution locations worldwide. Our business is keeping you on the move.
2 D Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : 1/2 Keyed Seal Material: Nitrile : or Counter D Rapid Response Model D R Frame Front Cover Counter ort Options Rapid Response 12 Order Number CC CIR Inlet ort Outlet ort Dim Dim Counter SE-10 SE N/ D052-R D051-R SE-10 SE N/ D072-R D071-R SE-10 SE N/ D092-R D091-R SE-10 SE N/ D112-R D111-R SE-10 SE N/ D142-R D141-R SE-10 SE N/ D172-R D171-R SE-10 SE N/ D222-R D221-R 12-1 arker Hannifin Corporation
3 16 Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : See Seal Material: Viton : or Counter 16 Rapid Response Model 16 N 5 ump Frame C - - Counter 2-13T 16/32 Splined 3-7/8 St Keyed Flange Rear Cover Order Number CC CIR Inlet ort Outlet ort Dim Dim Counter in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R in 3 /rev Side #20 Side # R R 12-2 arker Hannifin Corporation
4 G505 Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : 1/2 Keyed Seal Material: Nitrile : or Counter G505 Rapid Response Model G Gear Design ump 505 Frame Style Displacement J1 H1 End Cover N Seal Material D3 Side Inlet D2 Side Outlet 1 Rear Inlet 1 Rear Outlet 12 CC CIR Inlet ort Outlet ort Dim Dim C Order Number Counter /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R N/ /4-16 UNF 9/16-18 UNF R R 12- arker Hannifin Corporation
5 G505 Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : SE 9-Tooth Splined Seal Material: Nitrile : or Counter G505 Rapid Response Model G H1 N D3 D2 1 1 Gear Design ump Frame Style Displacement End Cover Seal Material Side Inlet Side Outlet Rear Inlet Rear Outlet CC CIR Inlet ort Outlet ort Dim Dim C Order Number Counter /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R /4-16 UNF 9/16-18 UNF R R 12- arker Hannifin Corporation
6 G511 Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : SE 5/8 Keyed Seal Material: Nitrile : or Counter G511 Rapid Response Model G Gear Design ump 511 Frame Style Displacement K1 H2 End Cover N Seal Material Side Inlet Side Outlet 1 Rear Inlet 1 Rear Outlet 12 CC CIR Inlet ort () Outlet ort () Dim Dim C Order Number Counter /16-12 UN (D5) 7/8-14 UNF (D4) R R /16-12 UN (D5) 7/8-14 UNF (D4) R R /16-12 UN (D5) 7/8-14 UNF (D4) R R /16-12 UN (D6) 1 1/16-12 UN (D5) R R /16-12 UN (D6) 1 1/16-12 UN (D5) R N/ /16-12 UN (D6) 1 1/16-12 UN (D5) R N/ /16-12 UN (D6) 1 1/16-12 UN (D5) R N/ 12- arker Hannifin Corporation
7 G511 Rapid Response General Description: Displacement: See Mounting Flange: SE 2-olt orts: SE O-Ring Side : SE 9-Tooth Splined Seal Material: Nitrile : or Counter G511 Rapid Response Model G H2 N 1 1 Gear Design ump Frame Style Displacement End Cover Seal Material Side Inlet Side Outlet Rear Inlet Rear Outlet CC CIR Inlet ort () Outlet ort () Dim Dim C Order Number Counter /16-12UN (D5) 7/8-14 UNF (D4) R R /16-12UN (D5) 7/8-14 UNF (D4) R R /16-12UN (D5) 7/8-14 UNF (D4) R R /16-12 UN (D6) 1 1/16-12 UN (D5) R N/ /16-12 UN (D6) 1 1/16-12 UN (D5) R R /16-12 UN (D6) 1 1/16-12 UN (D5) R R /16-12 UN (D6) 1 1/16-12 UN (D5) R R 12- arker Hannifin Corporation
8 Hydraulic umps Check Valves General Description: The C5V flange mounted check valves are ideal for pump outlet ports, cylinder ports, manifolds, or any ¾ to 1 ½ 61 4-bolt flange port. These valves provide a compact, leak-free solution for any hydraulic circuit. Hydraulic ump Check Valves - Flange Mounted Series C C C5V C5V C5V C5V art No. Model No. Size ressure Rated Flow Cracking ressure at rated flow Seal Compound C5V / psi 26.5 gpm 14.5 psi 25 psi una-n C5V psi 52.5 gpm 7 psi 24 psi una-n C5V / psi gpm 7 psi 43 psi una-n C5V / psi 198 gpm 7 psi 150 psi una-n arker Hannifin Corporation
9 Hydraulic umps ower Units General Description: The D, H, and V-ak style power units are ideal for many applications. The space saving vertical style units are available with gear or piston pumps and are designed for quiet and leak-free operation. Hydraulic ump ower Units ower Unit erformance Data Model Series Tank (gal.) ump Flow, 1725 RM Electric Motor (H) Max ressure (SI) D-ak H-ak 10, 20, 30, V-ak 10, 20, 30, V-ak Low rofile art No. Tank Size (gal.)/ Series Filter (10 Micron) Motor (H) ump 1800 RM Max ressure (SI) D-ak-DRIVEN1 5/D5 12T D-ak-DRIVEN2 5/D5 12T H-ak-DRIVEN1 10/H1 12T H-ak-DRIVEN2 20/H2 12T V-ak-DRIVEN1 20/V2 12T V-ak-DRIVEN2 30/V3 40CN V-ak-DRIVEN3 80/V8 40CN V-ak-DRIVEN4 80/V8 40CN arker Hannifin Corporation
10 T T -D03 -D05 -D03 -D05 T SFETY RELIEF DO NOT DJUST UM COMENSTOR CONTROL Catalog COR001/US Hydraulic umps ower Units Hydraulic ump ower Units D-ak H-ak & V-ak Low rofile V-ak TO VIEW (15.0) (12.5) E F TO VIEW TO VIEW G (12.5) G F UM RIME 22.9 (.9) 22.9 (.9) FRONT front VIEW D (10.62) to (13.44) depending on motor FRONT front VIEW (10.36) C (12.12) V-K D C E Series H1 H2/V2 V3 V8 * to to to to 24.7 * to to to 5.69 C D E F G arker Hannifin Corporation
11 Hydraulic umps SDV Vane ump General Description: The SDV series are a fixed displacement vane pump ideal for low to mid pressure applications. Their compact design and low noise features make them well suited for compactors, test stands and remote pilot pumps. Hydraulic ump SDV Vane ump a C D a C D F F G G SDV-10 e H SDV-20 H e Ring Size * C Max D ØE F G ØH SDV to SDV to art No. Model No. Displacement 1800 RM Max ressure Mounting ort Size RM Seal Compound SDV / SDV cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 NTF Outlet: 1/2 NTF 3000 una-n (viewed from shaft end) SDV / SDV10 1S4S cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 5/16-12 UNF-2 Outlet: 3/4-16 UNF una-n (viewed from shaft end) SDV / SDV cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 NTF Outlet: 1/2 NTF 2100 una-n (viewed from shaft end) SDV / SDV10 1S6S cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 5/16-12 UNF-2 Outlet: 3/4-16 UNF una-n (viewed from shaft end) SDV / SDV cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 1/4 NTF Outlet: 3/4 NTF 2400 una-n (viewed from shaft end) SDV / SDV20 1S8S cc psi 2 bolt flange pilot diameter (SE-) Straight Keyed (.75 dia) Inlet: 1 5/8-12 UNF-2 Outlet: 1 1/16-12 UNF una-n (viewed from shaft end) arker Hannifin Corporation
12 Motors Series TE - TF Features: Rugged Cast Iron construction Roller Vane ower Element for high volume efficiency and long life Orbiting Commutator for accurate timing and smooth low speed operation Full Flow Spline Lubrication for extended spline life High ressure Seal for high back pressure operation without external drain lines Spline Geometry for superior powertrain strength and long service motor life Specifications: Maximum Oil Temperature: 200ºF Two olt SE Mount 1.00 Diameter i-al 1/4 Key End ort Size 1/2 NT Thread Maximum Working ressure: 2750 psid Motors How To Order Series TE Motors TE Series Displacement Mounting orts Options Mounting SE 2 olt 10 1 Keyed Standard orts 1/2-14 NTF 0 Standard Options No aint Series TF Motors TF Series Displacement Mounting orts Options Mounting SE 2 olt /4 Keyed orts 1/2-14 NTF 0 Standard Options No aint arker Hannifin Corporation
13 Motors Series TE Motors Series TE Geometric Displacement Intermittent Flow Oil Flow Differential ressure Supply ressure Torque erformance Min. Starting Torque art No. Cubic in. Int rev/min (g/min) (SI) max (SI) (lb.-in.) max H (lb.-in.) TE TE TE TE TE TE TE TE TE TE TE TE TE TE TE * Intermittent operation rating applies to 10% of every minute. Note: erformance data based on testing using 10W40 oil with viscosity of 43.1cSt (200 SUS) at 130 F. erformance data is typical. ctual data may vary slightly from one production motor to another arker Hannifin Corporation
14 Motors Series TF Motors Series TF Geometric Displacement Intermittent Flow art No. Cubic in. rev/min Oil Flow (g/min) Differential ressure (SI) Supply ressure max (SI) Torque (lb.-in.) erformance max H Min. Starting Torque (lb.-in.) TF TF TF TF TF TF TF TF TF TF TF * Intermittent operation rating applies to 10% of every minute. Note: erformance data based on testing using 10W40 oil with viscosity of 43.1cSt (200 SUS) at 130 F. erformance data is typical. ctual data may vary slightly from one production motor to another arker Hannifin Corporation
15 Notes arker Hannifin Corporation
Power Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data
ower Units H-ak & V-ak H-ak and V-ak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet
More informationHigh Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
More informationHigh Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More information1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco
Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: The 1500K Series Pump/Motor utilizes the many design and application features of the widely accepted HYDRECO Series modern
More informationVickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationEaton Char-Lynn Spool Valve Hydraulic Motors
B-5 Eaton Char-Lynn Spool Valve Hydraulic Motors Spool Valve: J, H, S, T, W Series B-1 B-3 B-4 Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationGlobal Gear Products. Brochure. SAE A-Aluminum (Group 2)
Global Gear Products Brochure SAE A-Aluminum (Group 2) High Efficiency, Low Noise Applications for Eaton Gear Products Turf care Agriculture tractors and harvesters Lift trucks Skidsteer loaders Fan drive
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationS Series (103-) Highlights
S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationS Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
More informationFiltration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75
ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationSeries 26 Model GEAR PUMPS. Quiet Operation. Improved Efficiency. Field Reversible MACMILLIN
Series 26 Model 26000 GEAR PUMPS Quiet Operation Improved Efficiency Field Reversible MACMILLIN MACMILLIN Series 26 High Pressure Gear Pump GEAR PUMPS Pressures to 3500 PSI Flow to 24.1 GPM Quiet Operation
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationHydraulic Motor Model BMK6
Hydraulic Motor Model BMK6 Crossover to Char-ynn 6000 Series gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller bearings permit
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationHydraulic Motor/Pump Series F11/F12 zp12
Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm
More informationW1500 SERIES HYDRAULIC PUMP
W1500 SERIES HYDRAULIC PUMP Concentric AB Innovation in Hydraulics PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI) SPEED 3300 RPM Min. 500 RPM at 4000 PSI (276 BAR) Continuous EFFICIENCY Overall
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP Concentric A Innovation in Hydraulics Table of Contents Description Page Number W1200 Product Specifications and Performance Information -----------------------------------------------------------------------3
More informationHigh Torque Vane Motor MV015 Series Technical Data Sheet
High Torque Vane Motor MV15 Series Technical Data Sheet R 1551 Edition: 213-11 Maximum operating pressure: 3 psi (27 bar) Code 61 Features Use: Medium speed, high torque applications requiring reliability
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationGear Pump Model G4, Series 2X
s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or
More informationSC HYDRAULIC ENGINEERING CORPORATION
Designers and Manufacturers of Hydraulic and neumatic Equipment Since 1953 SC HYDRAULIC ENGINEERING CORORATION 113 Columbia Street - Brea, California 92821 - USA hone (714) 257-48 - Fax (714) 257-481 L3
More information2FV2V Series Variable Priority Flow Dividers
2FV2V Series Variable riority Flow Dividers Milwaukee, WI 53235, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK Tel: +44 (0) 1480 397 400 sales-uk@webtec.com www.webtec.com
More informationFIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationADM SERIES GEROTOR MOTOR LOW SPEED HIGH TORQUE
AD SERIES EROTOR OTOR LOW SEED HIH TORQUE ALICATIONS Use the AD Series for light to medium duty applications such as grain augers and elevators, salt and sand spreaders, car wash and sweeper brushes, conveyors,
More informationFEATURES SPECIFICATIONS
RS 1 FETURES 2 3 1 High Pressure Viton Shaft Seal offers superior seal life and performance and eliminates the need for case drain. 2 Pressure Fed earing surface receives positive flow of clean, cool oil.
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More informationGear Pumps and Motors Technical Catalog. Series 26 Pumps Series 26 Motors Series L2 Pumps
Gear Pumps and Motors Technical Catalog Series 26 Pumps Series 26 Motors Series L2 Pumps Table of Contents Series 26 Pumps Features...5 General Specifications and Performance Data...7 Performance Data
More informationPVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
More informationHydraulic Pump T7AS/T7ASW Series Vane Pumps
Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationPumps & Motors GRESEN INDEX
Pumps & Motors GRESEN INDEX Series Overview......................156-157 Pump and Motor Displacement Chart...158-159 General Product and Safety Information.....160 Torque Requirements & Overhang Data......161
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationIFP FIXED DISPLACEMENT PISTON MOTORS MFB5/10/20/29
IFP FIXED DISPLACEMENT MOTORS MFB5/10/20/29 High Efficiency Wide Speed Range Extended Life Reversable Compact Quiet Operation High Operating Pressure C:\wliu\MFB1.bmp Piston Motor Ordering Specification
More informationFEATURES SPECIFICATIONS
KP 3 FETURES 4 1 1 2 Cylindrical Roller earing supports the thrust load generated by the piston group. ronze-coated Wear Plate dissipates heat and transfers it to the case drain oil. 3 High Volume Charge
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationXCEL 45 Steering Control Units
XCEL 45 Steering Control Units Bolt-on riority Valves In-line riority Valves Flow up to 45 lpm Displacement 40-500cc Table of Contents XCEL 45 Overview...................................................3
More informationCVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide 2 Table of Contents Description Page Number W1200 Product Specifications and Performance
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US
More informationModular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationHydraulic Pump Division. Product Range - HY /HPD/US. aerospace climate control electromechanical filtration fluid & gas handling
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic Pump Division Product Range - HY28-2673-01/HPD/US WRNING
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 2000, 4000, 6000, and 10,000 Series Hydraulic Motors We Manufacture 11-01-878 EN-0201 Solutions S o l u t i o n s
More informationCOMPACT. Series CA 50 - CA 210
COMPACT Series CA 50 CA 210 Hägglunds Drives AB Hägglunds Drives AB is the worldwide market leader in design, manufacture and supply of heavyduty hydraulic motors and complete drive systems. Our head office
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More informationShuttle Type Switches For Moderate to High Liquid Flow Rates
Shuttle Type Switches For Moderate to High Liquid Flow Rates Models for flow rate settings from.5 GPM to 100.0 GPM Rugged housings with port sizes ranging from 3/4 to 3 Efficient flow paths assure low
More informationHigh Torque Vane Motor MV037 Series Technical Data Sheet
High Torque Vane Motor MV37 Series Technical Data Sheet R 155 Edition: 213-1 Replaces: 212-1 Maximum operating pressure: 3 psi (27 bar) Code 61 45 psi (31 bar) Code 62 Features Use: Medium speed, high
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationModel 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
More informationHP3V SERIES SWASH PLATE AXIAL PISTON PUMP
H3V ERIE WAH LATE AXIAL ITON UM QUALITY - ERFORMANCE - EFFICIENCY www.henglihydraulic.com HYDRAULIC COMONENT Contents Techanical data... 1 Type introduction... 2 Regulators introduction... 3 erformance
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationDisc Valve Motors Integral Cross Over Relief Valve Technical Manual 2000 Series
Disc Valve Motors Integral Technical Manual 2000 Series Introduction Eaton Char-Lynn, your proven low speed high torque motor supplier, now offers the Char-Lynn 2000 Series motor with our proven Eaton
More informationWHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall
The Series motor is the leader in its class, offering high efficiency with rugged durability. The three-zone orbiting disk valve, laminated manifold and Roller Stator motor work harmoniously to produce
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationPump Safety Block Model DBA... / DBAW, Series 1X
ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing
More informationCheck Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
More informationPerformance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationHydraulic Motor Model BMH
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Hydraulic Motor Model BMH The BMH series advanced RRTRC gear set, shaft distribution flow, hydraulic motor is a compact, low
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationFEATURES: APPLICATIONS:
Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.
More informationFeatures: Applications: 12 standard sizes Pressures to 3625 PSI (250 Bar)
Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.
More informationSC HYDRAULIC ENGINEERING CORPORATION
Designers and Manufacturers of Hydraulic and neumatic Equipment SC HYDRAULIC ENGINEERING CORORATION 113 Columbia Street - Brea, California 92821 - USA hone (714) 257-48 - Fax (714) 257-481 B AB/ABD AIR
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More information