CAUTION! Exceptional Strength and Durability in a High Performance Motor/Brake Package
|
|
- Coral Benson
- 6 years ago
- Views:
Transcription
1 Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in3/rev) 13 Schluckvolumen cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum Pressure (3000 psid) (4000 psid) Eingangsdruck bar bar Pression entrée Presion Maxima H Series rake Motor HY /US,EU Exceptional Strength and Durability in a High Performance Motor/rake Package This brake motor consists of a H Series motor integrated into a wet disc, spring applied, hydraulically released brake. Standard holding capacity is 16,000 lb in of holding torque. The brake is front mounted for reliable operation even in the event of a system failure. The brake release port is capable of pressures to 3000 PSI. Maximum Oil Flow Schluckstrom Débit d huile Caudal Maximo de ceite Maximum Speed Drehzahl Vitesse de rotation Velocidad Maxima (30 gpm) lpm (660 rpm) 660 rpm Cont. Int. Maximum Torque (9,239 lb in) (12,636 lb in) MaxDrehmoment 1044 Nm 1428 Nm Couple Torque Maximo Maximumg Side Load at Key Seitenlast Charges latèrales Carga Maxima Lateral (4790 lb) N CUTION! See installation/operating instructions for product cautions and proper use. Rated rake Holding Zero Release Pressure Nm (in-lbs) Minimum Full Release Pressure bar (PSI) 1800 (16,000) 22 (315) 16,000 in-lbs is standard holding capacity. For other holding capacities, see page Parker Hannifin Corporation
2 Ordering Information / estellschlüssel System de Commande / Imformacion para pedidos H Series rake Motor HY /US,EU H XXXX X XX 0 XXXX Series Displacement Mounting/Ports Schluckvolumen Gehäuse/nschluß Cylindrée Carter/Plan de raccordement Desplazamiento Montaje/Lumbreras Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U cm 3 /tr 0140 cm 3 /giro in 3 /rev 141 / / / / / / / / / / / / / * 32 Shaft 1 1/2" J501 Taper 1 1 1/2" Keyed * Castle nut available on Tapered Shafts Only. Ecrou a creneaux degages disponible pour l'arbre conique seulement Solo eje conico viene con tuerca entallada 1 See installation instructions. Mounting/Ports Front Mtg/Front olting 1/2-13 UNC Thd, 7/8-14 SE Front Port Rotation 0 Standard S CS Rear Mtg/Thru olting, 7/8-14 SE 1 Reverse Timed Manifold Description No Paint No lackiert lack Paint Schwarz lackiert For performance data curves, see TH section. For other available options, see pages Parker Hannifin Corporation
3 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial H Series rake Motor HY /US,EU Wheel Mount/Radnabengenhause Monture à roue/ Montaje de rueda Side Load - N (lbs) 71,171 (16,000) 62,275 (14,000) 53,378 (12,000) 44,482 (10,000) 35,584 (8,000) 26,688 (6,000) 17,792 (4,000) 8,896 (2,000) (-3) (-2) (-1) The maximum load curve is defined by bearing static load capacity. This curve should not be exceeded at any time including shock loads. Die maximale radiale Wellenbelastungskurve ist definiert als maximale statische Last ohne Drehzahl. Sie gilt als Grenze und sollte keinesfalls überschritten werden. La courbe de charge maximale est définie par la capacité de charge statique portante. Cette courbe ne devrait être dépassée en aucun moment y compris pour les charges par à-coups. La curva de carga máxima queda definida por la capacidad de carga estática del cojinete. No se deben superar los valores de esta curva, ni siquiera con cargas provisorias de impacto. 0 (0) 25.4 (1) Max Load Curve Dynamic Load Curve 50.8 (2) 76.2 (3) (4) Distance from Mounting Face - mm (in) Motor Image Not To Scale Equation to Calculate the Expected Radial earing Life Gleichung zur Ermittlung der Lagerlebensdauer (5) (6) Equation to calculate the dynamic bearing life for a given load: estimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last The dynamic side load curve is based on uni-directional steady state loads for L 10 bearing life at 6 x 10 6 revolutions. Die zulässige auslegbare radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhältnissen auf eine L 10 Lebensdauer mit 6 x 10 6 Umdrehungen kalkuliert. La courbe de charge latérale permise se base sur des charges unidirectionnelles en régime permanent pour le roulement L 10 à 6 x 10 6 révolutions. La curva de valores admisibles de carga lateral está basada en cargas constantes para cojinetes L 10 a 6 x 10 6 revoluciones. Use F a, F b and S in equation to determine hours of L 10 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b, und S in die nachstehende Formel. 6 x 10 6 { F a}3.33 L = 60 x S Fb Where / Mit: S = Shaft Speed RPM / btriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = Dynamic side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = pplication side load. / nwendungsseitige Wellenbelastung Note: Calculations are based on L 10 bearing life per ISO 281. uslegung basiert auf einer L 10 Lenbendauer nach ISO Parker Hannifin Corporation
4 Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras H Series rake Motor HY /US,EU : S Front Mounting / Front olting, 7/8-14 SE O-Ring "L" (4.18) 72.9 (2.87) 27.0 (1.06) (1.350) 52.6 (2.07) 87.8 (3.460) 90 Ø (5.000) (4.996) (7.30) 58.4 (2.3) 7/8-14 SE O-Ring Ports 7/16-20 O-Ring Port (6.75) Ø127.00/ (5.000/4.996) Ø13.46(.530) x (1.54) x 1/2-13 UNC (7.18) Ø (7.50) S Weight/Gewicht Poids/Peso Length "L" "L" kg (lb) (60.2) (60.8) (61.3) (62.1) (63.0) (63.5) (63.9) (65.2) (66.7) (68.3) (69.9) (73.3) (77.1) mm (in) (7.82) (7.94) (8.07) (8.25) (8.44) (8.58) (8.69) (8.98) (9.32) (9.57) (9.94) (10.69) (11.44) : CS Rear Mounting/Thru olting, 7/8-14 SE O-Ring (7.40) "L" (4.18) 72.9 (2.87) 27.0 (1.06) (1.350) 52.6 (2.07) (7.30) Ø (5.000) (4.996) (7.30) 58.4 (2.3) (6.75) 4 X ø 13.5 (.530) 7/8-14 SE O-Ring Ports 7/16-20 O-Ring Port Ø127.00/ (5.000/4.996) CS Weight/Gewicht kg Poids/Peso (lb) (60.2) (60.8) (61.3) (62.1) (63.0) (63.5) (63.9) (65.2) (66.7) (68.3) (69.9) (73.3) (77.1) Length "L" mm "L" (in) (7.82) (7.94) (8.07) (8.25) (8.44) (8.58) (8.69) (8.98) (9.32) (9.57) (9.94) (10.69) (11.44) English equivalents for metric specifications are shown in ( ). 240 Parker Hannifin Corporation
5 Shafts / btriebswellen rbre / Ejes H Series rake Motor HY /US,EU : /2" J501 Taper (5.12) : /2" Keyed (4.58) : /2" J501 Taper 48 (1.89) 25.4 (1.0) UNEF 1:8.374 Square Key Md: 500Nm (370 Ft Lb) 23 (0.9) / (1.5 / 1.499) 9.50 / 9.47 (.374 /.373) 4.00 / 3.45 (0.157 / 0.136) : /2" Keyed 50.0 (1.97) 36.5 (1.44) 8.1 (.319) 4.29 (.169).374 Square Key 9.50 / 9.47 (.374 /.373) / (1.500 / 1.499) / (1.655 / 1.636) 19.0 (0.75) 7/8-14 UNF English equivalents for metric specifications are shown in ( ). 241 Parker Hannifin Corporation
6 Notes H Series rake Motor HY /US,EU 242 Parker Hannifin Corporation
Hydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 958 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationHydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 960 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm04 TJ Series
Technical Information / Technische Information / Segni / Informacion Tecnica zm4 HY13-159-4/,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 41... 39 cm 3 /rev 14 Cylindrée 14 Despazamientos
More informationLSHT Torqmotors TM and Nichols TM Motors zm07 TH Series
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in 3 /rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TG Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 3 Displacements (8.6 to 58.5 in 3 /rev) 3 Schluckvolumen 4... 959 cm 3 /rev 3 Cylindrée 3 Despazamientos Maximum Pressure (3 psid)
More informationLSHT Torqmotors TM and Nichols TM Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm08 TK Series
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Cont. Int. Maximum Pressure
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TK Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Maximum Pressure ( psid)
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica zm2 T Series / Serie / Série HY13-159-4/,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica TE Series / Serie / Série HY13-1553-1/N,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 45... 39 cm 3 /rev 14 ylindrée
More informationLSHT Torqmotors and Nichols Motors 110A Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 9 Displacements (3.6 24.1 in 3 /rev) 9 Schluckvolumen 59 395 cm 3 /rev 9 Cylindrée 9 Despazamientos Cont Int Maximum Pressure
More informationHydraulics. Technical Information /Technische Information / Segni/Informacion Tecnica. Low Speed High Torque Hydraulic Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm09 110A Series
Technical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationLSHT Torqmotors and Nichols Motors 716 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 6 Displacements Series (3.6 12.9 in 3 /rev) 6 Schluckvolumen 59 211 cm 3 /rev 6 Cylindrée Parallel (7.2 25.8 in 3 /rev) 6 Despazamientos
More informationLSHT Torqmotors and Nichols Motors. Catalog No. HY /US,EU
LSHT Torqmotors and Nichols Motors Catalog No. HY13-159-9/US,EU WRNING FILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS ND/OR SYSTEMS DESCRIED HEREIN OR RE- LTED ITEMS CN CUSE DETH, PERSONL
More informationLSHT Torqmotors and Nichols Motors 700 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica Displacements Series (3. 1.9 in 3 /rev) Schluckvolumen 59 11 cm 3 /rev Cylindrée Parallel (7. 5.8 in 3 /rev) Despazamientos 118
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen
More informationTechnical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationSERIES HYDRAULIC MOTORS
ERIE HYDRULIC MOTOR overview The eries motor is the leader in its class, offering high efficiency and durability. The three-zone orbiting valve, laminated manifold and Roller tator motor work harmoniously
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationWHITE MOTORS. Features. Max Torque lb-in (Nm) Cont. Inter. *Stall
Due to its case drain design, the Series motor is an excellent medium size motor for applications with high duty cycles or frequent direction reversals. The case drain design produces a number of benefits
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationCOMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS www.sternhidraulica.com Características técnicas Technical characteristics Los actuadores rotativos generan un par de torsión a través de una rueda dentada
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationSERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
More informationEA5506. Electrically Actuated Carbon Steel PN16 Ball Valve. Description
Electrically Actuated Carbon Steel PN16 Ball Valve Direct Mount No Brackets Needed Carbon Steel Body WCB Full Bore DN15-DN100 / 1/2-4" Powerful Electric Actuator Many Optional Extras Offered Seats Description
More information6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Series (Progressive / Progresivo)
10 20 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through the shaft. Fijación al eje por chavetas y entrada de aceite por el eje.
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationPVC FOOT VALVE SKU: CV4674
SKU: CV4674 PVC-U Foot Check Valve Socket and BSP PVC-U Fuß Rückschlagventil Sockel und BSP PVC-U Pie válvula de retención del zócalo y BSP PVC-U pied Clapet Socket et BSP PVC Foot Check Valve - Socket
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationWHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall
The Series motor is the leader in its class, offering high efficiency with rugged durability. The three-zone orbiting disk valve, laminated manifold and Roller Stator motor work harmoniously to produce
More information9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models
Model Codes P *** -(F)-(M) * *(F)(X) (*)-** -**-(C)-(G)-(L)- ** -**** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 F V asic models = Fixed displacement type = Variable displacement type 2 Displacement PF and
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationGV4223. Cast Steel Globe Valve API 600 ANSI Class 150 & 300. Sizes 2" - 12"
Sizes 2" - 12" Cast Steel Globe Valve API 600 ANSI Class 150 & 300 Swivel Plug Disc Design Standard Bolted Bonnet Construction Outside Screw and Yoke, Rising stem Handwheel Operated (Actuation Available)
More informationHYDRAULIC CLUTCH-BRAKE SERIES
HYDRAULIC CLUTCH-BRAKE SERIES SERIES DE FRENO- EMBRAGUES HIDRáULICOS GOIZPER 21 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationINDEX. YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP - MLHP YMPW - YMR OMR - MLHR YMH - YMSE YMSS OMSS -
INDEX SECTION PAGE YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP MLHP YMPH OMPW DH H HP YMPW MLHPW YMR OMR MLHR YMRS OMH DS S HR YMH MLHH YMSY OMS 2 ALT MLHS/MLHSY YMSE 2 YMSS OMSS MLHSS YMSJ 2 bearingless
More informationCLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8
CLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8 This series corresponds to the latest of the pneumatic clutch-brakes developed by GOIZPER. One of its main characteristics is that it obtains the maximum
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationSKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationMK09 COMPACT MOTORS T E C H N I C A L C A T A L O G
MK09 COMPACT MOTORS T E C H N I C A L C A T A L O G Motor Inertia 0.3 kg.m² Theoretical torque Max.power Max. speed Max. pressure at 100 bar at 1000 PSI cm³/tr [cu.in/rev.] Nm [lb.ft] kw [HP] tr/min[rpm]
More information镇江液压件厂有限责任公司 BMV SERIES HYDRAULIC MOTOR BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV
BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationMODELS BMSY 154 (9.39) 125 (7.63)
MDES BMSY The BMSY series motor adapts the advanced RRTRC gear set design with DISC distribution fl ow and high pressure. These motors can be supplied with various options for multifunctional operations
More informationOildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
More informationService Manual Series F12
Bulletin HY30-5504-M1/UK Effective: June, 2006 Supersedes: August, 2003 List of contents Page General information...3 Specifications...4 Disassembling...5-10 Assembling...11-16 Change of shaft seal...17
More informationHydraulic BRAKES. Series. Delivering The Power To Get Work Done. Hydraulic motors. Hydraulic motor brake units. Steering.
Hydraulic motors LD MD Hd Hydraulic BRAKES Series Hydraulic motor brake units Steering units Hydraulic brakes Hydraulic pumps Flow Dividers Delivering The Power To Get Work Done table of contents Operating
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationAHP Blockzylinder mit langem Hub
AHP Blockzylinder mit langem Hub AHP Block cylinder with long stroke AHP Vérins blocs avec course longue BRB 0 Wir bringen Qualität in Umlauf We set quality in motion ous faisons avancer la qualité Blockzylinder
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationWhite House Products Ltd
White House Products Ltd Issue 5 - Section 23 To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationHydraulic Motor Model BMSY
UID CMPNENTS, INC. Hydraulic Motor Model The series motor adapts the advanced gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller
More informationHydraulics. Hydrostatic Steering Units HGA/HGB Series. HGA/HGB Series Features
Introduction HGA/HGB Series The HGA and HGB series Hydraguide steering units are designed for applications such as large agricultural equipment including tractors, combines and other self-propelled, specialized
More informationHydraulic Pump Division. Product Range - HY /HPD/US. aerospace climate control electromechanical filtration fluid & gas handling
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic Pump Division Product Range - HY28-2673-01/HPD/US WRNING
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationSTANDARD handles. outside. Rose. HoPPE LiVERPooL Aluminum. Aluminum. Aluminum. Aluminum. inside. HoPPE LiVERPooL. Aluminum. HoPPE LiVERPooL.
handle SeleCTiON STANDARD handles HoPPE ATLAnTA 1.100 PATio HoPPE 5004 Handlebar 330 mm AUBi spruce Trendline 04 spruce Classic 01 HoPPE E5011 Handlebar 400-1800 mm RAL 9010 Pure white RAL 7016 Anthracite
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationHydraulic Motor Model BMV
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Technical Specifications MDE BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More informationMK23 MKE23 COMPACT MOTORS T E C H N I C A L C A T A L O G
MK23 MKE23 COMPACT MOTORS T E C H N I C A L C A T A L O G Compact motors MK23 MKE23 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More informationEaton. Revised June, Heavy Duty Hydrostatic Transmissions. l r. Models 33 through 76 Hydrostatic Transmissions. We Manufacture.
s Eaton Revised June, 1997 c Heavy Duty Hydrostatic Transmissions h i y d l ydraulics r a u u l c a i r s y d Models 33 through 76 Hydrostatic Transmissions We Manufacture Solutions H S o l u t i o n s
More informationHydraulic Motor Model BMV
UID CMPNENTS, INC. MDE BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm Max Torque Max Differential psi 20.32 (333) Hydraulic Motor Model BMV The BMV series motor adapts the advanced gear set
More informationUNE ISO RNL
SERIE RNL UNE 166.002 ISO 14001 RNL 1063 Agrupadas según eje Grouped according to the shaft form RNL 1450 R.P.M..M. Altura () Head Altura () Head Caudal (Q) Capacity RNL 2900 R.P.M..M. Caudal (Q) Capacity
More informationMSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Modular hydraulic motors MSE03 POCLAIN HYDRAULICS CHARACTERISTICS Motor inertia Noise emissions = 0.01 kg.m² = 60 dba Theoretical torque Max.power
More informationSeries P2/P3 Variable Volume Piston Pumps
Variable Volume Piston Pumps A Bulletin HY13-2656-B1/US A3 Introduction General information The newly developed variable displacement piston pumps from Parker Hannifin, designated P2 and P3, are mainly
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationSERIES RV A - N. How to Order. Range chart. Over stroke bushing. Nitrided Superfi nished. Uncontrolled Speed. Black oxide. Over.
RV SERIES ISO VDI BMW Ford Mazda MB Nissan PSA VW Nitrided Superfi nished Over stroke bushing Uncontrolled Speed Active Safety Black oxide Over Stroke Active Safety Range chart Model Body Ø Stroke Cu Over
More informationRadial piston motor for wheel drives MCR-F
Radial piston motor for wheel drives MCR-F RE 15198 Edition: 02.2017 Replaces 07.2015 Frame size MCR3, MCR5, MCR10, MCR15 (for frame size 20 see MCR20-C) Displacement 160 cc to 2150 cc Differential pressure
More informationFITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
More informationAma Porter. 50 Hz. Submersible motor pumps
Type series booklet 2539.51 10 Ama Porter Submersible motor pumps 50 Hz Fields of Application Pumping of waste water containing solid matter or domestic sewage such as waste from toilets, washing machines,
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationVariable Displacement Piston Pumps. Performance Information. Features. Specifications. Controls. Schematic Symbol (Basic Pump) Weight and Package Size
Catalog HY13-1552-2/US Technical Information Series PVC65 Performance Information Series PVC65 Compensated, Variable Volume, Piston Pump Features High Strength Cast-Iron Housing uilt-in Supercharger High
More information