Technical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TK Series / Serie / Série
|
|
- Delilah Martin
- 5 years ago
- Views:
Transcription
1 Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen cm 3 /rev Cylindrée 7 Despazamientos Maximum Pressure ( psid) (45 psid) Eingangsdruck Pression entrée Pressione in entrata TK Series / Serie / Série HY /US,EU Exceptional Strength and Durability in a High Performance Motor The heart of Parker s TK Series powertrain, the torque link, is an extra heavy duty part that includes patented 6:4 spline geometry. Rugged construction throughout allows the transmission of over 23, lb-in of torque. The entire powertrain is continually washed in cool, high flow fluid to assure long life. Roller vanes and sealed commutator maintain high efficiency and provide smooth low speed performance. Maximum Oil Flow Schluckstrom Débit d huile Portata Maximum Speed Drehzahl Velocità di rotazione Vitesse de rotation (6 gpm) lpm (523 rpm) 523 rpm Maximum Torque (2136 lb in) (24 lb in) MaxDrehmoment 2413 Nm 266 Nm Couple Coppia Maximum Side Load at Key Seitenlast Charges latèrales Carico radiale (59 lb) N 243 Parker Hannifin Corporation
2 Ordering Information / Bestellschlüssel System de Commande / Imformacion para pedidos TK Series / Serie / Série HY /US,EU TK XXXX X5 XX XXXX Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting/Rear Ports Gehäuse/Endanschluß Carter/Alimentazione Laterale Montaje/Orifices arriér Shaft Welle Arbre Ejes Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /tr cm 3 /giro Code cm 3 /U in 3 /rev / / / / / / / 61. Code Shaft 1 1/2" Keyed /2" 17 Tooth 12/24 Spline Code Rear Port Rotation Standard 1 Reverse Timed Manifold B B A A 1 3/4" Tapered Code K5 Mounting Standard SAE CC, 1 5/16-12 SAE Rear Radial mm Keyed Code AAAB AAAA Options No Paint No lackiert Black Paint Schwarz lackiert Wheel Mount, 1 5/16-12 SAE Rear Radial T5 For other available options, see pages Parker Hannifin Corporation
3 TK Series / Serie / Série HY /US,EU Motor Series TK cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen Cylindrée Despazamientos rev/min cont / int* l/min g/min Max. Max. intermittent flow Max. Drehzahl Intermittierender Betrieb: Velocità di rotazione max Fonctionnement intermittent: Velocidad maxima a caudal intermitente maximo Max. oil flow Max. Schluckstrom Débit d huile maxi Caudal Maximo de Aceite cont / int* psid Max. differential pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima max psig Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment Couple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo redinmiento Min. starting torque Min. Anlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque TK TK TK TK TK TK TK Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. 245 Parker Hannifin Corporation
4 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 25 cc / rev Schluckstrom [L/min] Drehzahl [1/min] 17 TORQUE (LB IN) 5647 SPEED (RPM) 492 Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 246 Parker Hannifin Corporation
5 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 315 cc / rev Schluckstrom [L/min] Drehzahl [1/min] 17 TORQUE (LB IN) 6943 SPEED (RPM) 383 Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Intermittierende Werte maximal 1% von jeder Betriebsminute. Caacidad de funcionamiento intermitente valida para 1% por cada minuto. 247 Parker Hannifin Corporation Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores.
6 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 4 cc / rev Schluckstrom [L/min] Drehzahl [1/min] TORQUE (LB IN) 8961 SPEED (RPM) 345 Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 248 Parker Hannifin Corporation
7 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 5 cc / rev Schluckstrom [L/min] Drehzahl [1/min] TORQUE (LB IN) 1141 SPEED (RPM) 275 Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Intermittierende Werte maximal 1% von jeder Betriebsminute. Caacidad de funcionamiento intermitente valida para 1% por cada minuto. 249 Parker Hannifin Corporation Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores.
8 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 63 cc / rev Schluckstrom [L/min] Drehzahl [1/min] TORQUE (LB IN) 14 SPEED (RPM) 25 Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 25 Parker Hannifin Corporation
9 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] Schluckstrom [L/min] cc / rev TORQUE (LB IN) SPEED (RPM) 17 Drehzahl [1/min] Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Intermittierende Werte maximal 1% von jeder Betriebsminute. Caacidad de funcionamiento intermitente valida para 1% por cada minuto. 251 Parker Hannifin Corporation Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores.
10 TK Series / Serie / Série HY /US,EU TK cu in / rev PRESSURE (PSID) Flow (GPM) Drehmoment [Nm] 1 cc / rev TORQUE (LB IN) 293 SPEED (RPM) 136 Schluckstrom [L/min] Drehzahl [1/min] Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder Betriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 SUS at 54 C (13 F.) Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 SUS a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistugsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst beo 54 C. Geringfuegige Abweichungen von den Katalogerten sond moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 SUS de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 252 Parker Hannifin Corporation
11 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial TK Series / Serie / Série HY /US,EU Flange Mount / Standardgehäuse Monture à bride(s) / Montaje de brida Side Load - N (lbs) 71,171 (16,) 62,275 (14,) 53,378 (12,) 44,482 (1,),584 (8,) 26,688 (6,) 17,792 (4,) 8,896 (2,) (-3) -5.8 (-2) (-1) () Max Load Curve 25.4 (1) 5.8 (2) Dynamic Load Curve 76.2 (3) 11.6 (4) Distance from Mounting Face - mm (in) Motor Image Not To Scale (5) (6) Wheel Mount / Radnabengehäuse Monture à roue / Montaje de rueda Side Load - N (lbs) 71,171 (16,) 62,275 (14,) 53,378 (12,) 44,482 (1,),584 (8,) 26,688 (6,) 17,792 (4,) 8,896 (2,) (-1) () 25.4 (1) 5.8 (2) 76.2 (3) Max Load Curve Dynamic Load Curve 11.6 (4) 127. (5) (6) (7) Distance from Mounting Face - mm (in) Motor Image Not To Scale 23.2 (8) The dynamic side load curve is based on uni-directional steady state loads for L 1 bearing life at 12 x 1 1 RPM revolutions. Die zulaessige auslege radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhaltnissen auf eine L 1 Lebensdauer mit 12 x 1 6 Umdrehungen kalkuliert bei 1 min. La courbe de charge laterale permise se base sur des charges unidirectionnelles en regime permanent pour le roulement L 1 a 12 x 1 1 RPM revolutions. La curva de valores admisibles de carga lateral esta basada en cargas contantes para cojinetes L 1 a 12 x RPM. The maximum load curve is defined by bearing static load capacity. This curve should not be exceeded at any time including shock loads. Die maximale radiale Wellenbelastungskurve ist definiert als maximale statische Last ohne Drehzahl. Sie gilt als Grenze und sollte keinesfalls überschritten werden. La courbe de charge maximale est définie par la capacité de charge statique portante. Cette courbe ne devrait être dépassée en aucun moment y compris pour les charges par à-coups. La curva de carga máxima queda definida por la capacidad de carga estática del cojinete. No se deben superar los valores de esta curva, ni siquiera con cargas provisorias de impacto. Equation to Calculate the Expected Radial Bearing Life Gleichung zur Ermittlung der Lagerlebensdauer Equation to calculate the dynamic bearing life for a given load: Bestimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last Use F a, F b and S in equation to determine hours of L 1 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b und S in die nachstehende Formel. L = 12 x 1 6 { F a } x S F b Where / Mit: S = Shaft Speed RPM / Abtriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = Allowable side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = Application side load. / Anwendungsseitige Wellenbelastung Note: Calculations are based on L 1 bearing life per ISO 281. Auslegung basiert auf einer L 1 Lenbendauer nach ISO Parker Hannifin Corporation
12 Mounting,Ports/Gehäuse,Anschlüße Carter,Orifices / Montaje,Lumbreras TK Series / Serie / Série HY /US,EU Code: K5 Standard SAE CC, 1 5/16-12 SAE Rear Radial "L" 87.6 (3.45) 33.3 (1.31) 22.8 (.9) 45 ø15.9 (5.94) Max (2.45) (1.23) A B ø127. (5.) (4.995) A B ø (6.375) 4 x 9 1 5/16-12 STR THD O Ring Ports 11.6 (.46) ø 14. (.565) 9/16 Thru Holes 15 (5.92) Code K5 disp Weight/Gewicht k g Poids/Peso (lb) (7.6) (72.) (73.8) (76.) (78.8) (82.1) (86.3) Length "L" mm "L" (in) (1.9) (11.1) (11.4) (11.7) (12.2) (12.7) (13.4) Code: T5 Wheel Mount, 1 5/16-12 SAE Rear Radial 87.6 (3.45) 33.3 (1.31) "L" 22.8 (.9) 99.5 (3.95) (3.795) 45 ø15.9 (5.94) Max (2.45) (1.23) A B ø139.7 (5.5) (5.495) A B ø (7.25) 4 x 9 1 5/16-12 STR THD O Ring Ports (.478) ø 14. (.565) 9/16 Thru Holes Code T5 disp (6.57) Weight/Gewicht k g Poids/Peso (lb) (67.9) (69.3) (71.1) (73.3) (76.1) (79.4) (83.5) Length "L" mm "L" (in) (7.5) (7.7) (8.) (8.4) (8.8) (9.4) (1.1) English equivalents for metric specifications are shown in ( ). 254 Parker Hannifin Corporation
13 Shafts / Abtriebswellen Arbre / Ejes TK Series / Serie / Série HY /US,EU Code K Code T Code: 1 1/2 Keyed 77.5 (3.5) (6.39) Code: /2 17 Tooth 12/24 Spline 72.9 (2.87) (6.2) Code: /4 Tapered 91.9 (3.62) (6.96) Code: 64 4mm Keyed 93.2 (3.67) (6.99) English equivalents for metric specifications are shown in ( ). 255 Parker Hannifin Corporation
14 Shafts / Abtriebswellen Arbre / Ejes TK Series / Serie / Série HY /US,EU / 9.5 (.373 /.374) Code: 1 1/2 Keyed 6.3 (2.373) 38.7 / 38.1 (1.499 / 1.5) _ 3/8-16 UNC v18.54 (.73) Min (1.647) Code: / 38.1 (1.473 / 1.5) 1 1/2 17 Tooth 12/24 Spline _ 3/8-16 UNC v18.54 (.73) Min..4 (1.395) Min Full Spline 3.18 / 3.3 (.125 /.137).64 / 33.2 (1.285 / 1.37) Code: (2.125) 1 3/4 Tapered 77. (3.3) 5.49 (.216) / (.438 /.44) (1.75) Torque to Max. 61Nm (45 Ft Lb) See installation instructions Code: 64 4mm Keyed UNEF 1: (2.9) Min / 4.18 ( / ) / (.464 /.469) M12 _ x H v1. Min (1.688) English equivalents for metric specifications are shown in ( ). 256 Parker Hannifin Corporation
LSHT Torqmotors TM and Nichols TM Motors zm08 TK Series
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm04 TJ Series
Technical Information / Technische Information / Segni / Informacion Tecnica zm4 HY13-159-4/,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 41... 39 cm 3 /rev 14 Cylindrée 14 Despazamientos
More informationLSHT Torqmotors TM and Nichols TM Motors zm07 TH Series
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in 3 /rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica zm2 T Series / Serie / Série HY13-159-4/,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TG Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 3 Displacements (8.6 to 58.5 in 3 /rev) 3 Schluckvolumen 4... 959 cm 3 /rev 3 Cylindrée 3 Despazamientos Maximum Pressure (3 psid)
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure
More informationLSHT Torqmotors and Nichols Motors 716 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 6 Displacements Series (3.6 12.9 in 3 /rev) 6 Schluckvolumen 59 211 cm 3 /rev 6 Cylindrée Parallel (7.2 25.8 in 3 /rev) 6 Despazamientos
More informationLSHT Torqmotors and Nichols Motors 110A Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 9 Displacements (3.6 24.1 in 3 /rev) 9 Schluckvolumen 59 395 cm 3 /rev 9 Cylindrée 9 Despazamientos Cont Int Maximum Pressure
More informationCAUTION! Exceptional Strength and Durability in a High Performance Motor/Brake Package
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in3/rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationLSHT Torqmotors TM and Nichols TM Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors and Nichols Motors 700 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica Displacements Series (3. 1.9 in 3 /rev) Schluckvolumen 59 11 cm 3 /rev Cylindrée Parallel (7. 5.8 in 3 /rev) Despazamientos 118
More informationLSHT Torqmotors TM and Nichols TM Motors zm09 110A Series
Technical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationHydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 958 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationLSHT Torqmotors and Nichols Motors. Catalog No. HY /US,EU
LSHT Torqmotors and Nichols Motors Catalog No. HY13-159-9/US,EU WRNING FILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS ND/OR SYSTEMS DESCRIED HEREIN OR RE- LTED ITEMS CN CUSE DETH, PERSONL
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica TE Series / Serie / Série HY13-1553-1/N,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 45... 39 cm 3 /rev 14 ylindrée
More informationHydraulics. Technical Information /Technische Information / Segni/Informacion Tecnica. Low Speed High Torque Hydraulic Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationHydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 960 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationTechnical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationEA5506. Electrically Actuated Carbon Steel PN16 Ball Valve. Description
Electrically Actuated Carbon Steel PN16 Ball Valve Direct Mount No Brackets Needed Carbon Steel Body WCB Full Bore DN15-DN100 / 1/2-4" Powerful Electric Actuator Many Optional Extras Offered Seats Description
More informationCOMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS www.sternhidraulica.com Características técnicas Technical characteristics Los actuadores rotativos generan un par de torsión a través de una rueda dentada
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationWHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall
The Series motor is the leader in its class, offering high efficiency with rugged durability. The three-zone orbiting disk valve, laminated manifold and Roller Stator motor work harmoniously to produce
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationIndustrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationS Series (103-) Highlights
S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationTorqmotor Series TF/TG/TH/TK
Sepehr Hydraulic Asia Series TF/TG/TH/TK max. 49 kw Catalogue HY11-3213/EU Ed. 06 / 2003 Series DE Hinweis Die in diesem Katalog oder in Form anderer Informationen durch die Parker Hannifin GmbH, ihre
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationS Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
More informationMJ SERIES LOW SPEED HIGH TORQUE MOTORS
MJ SERIES LOW SPEED HIGH TORQUE MOTORS HIGH EFFICIENCY TORQUE MOTORS The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationMobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationHydraulic Motor Model BMK6
Hydraulic Motor Model BMK6 Crossover to Char-ynn 6000 Series gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller bearings permit
More informationWHITE MOTORS. Features. Max Torque lb-in (Nm) Cont. Inter. *Stall
Due to its case drain design, the Series motor is an excellent medium size motor for applications with high duty cycles or frequent direction reversals. The case drain design produces a number of benefits
More information6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Series (Progressive / Progresivo)
10 20 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through the shaft. Fijación al eje por chavetas y entrada de aceite por el eje.
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More informationCLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8
CLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8 This series corresponds to the latest of the pneumatic clutch-brakes developed by GOIZPER. One of its main characteristics is that it obtains the maximum
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationTorqmotor TM. Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor
Torqmotor TM Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationMobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More information镇江液压件厂有限责任公司 BMV SERIES HYDRAULIC MOTOR BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV
BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationHydraulic Motor Model BMSY
UID CMPNENTS, INC. Hydraulic Motor Model The series motor adapts the advanced gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationHydraulic Motor Model BMV
UID CMPNENTS, INC. MDE BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm Max Torque Max Differential psi 20.32 (333) Hydraulic Motor Model BMV The BMV series motor adapts the advanced gear set
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More informationPOMPE E MOTORI AD INGRANAGGI GRUPPO 3 GEARS PUMPS AND MOTORS GROUP 3
POMPE E MOTORI AD GRANAGGI GRUPPO 3 GEARS PUMPS AND MOTORS GROUP 3 TIPO Type CILDRATA Displacement VELOCITÀ MAX. Max. speed PORTATA MAX. Max. flow VELOCITÀ M. Min. speed PORTATA M. Min. flow PRESSIONE
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationSERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationFIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationHydraulic Motor Model BMV
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Technical Specifications MDE BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm
More informationHYDRAULIC CLUTCH-BRAKE SERIES
HYDRAULIC CLUTCH-BRAKE SERIES SERIES DE FRENO- EMBRAGUES HIDRáULICOS GOIZPER 21 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through
More informationGV4223. Cast Steel Globe Valve API 600 ANSI Class 150 & 300. Sizes 2" - 12"
Sizes 2" - 12" Cast Steel Globe Valve API 600 ANSI Class 150 & 300 Swivel Plug Disc Design Standard Bolted Bonnet Construction Outside Screw and Yoke, Rising stem Handwheel Operated (Actuation Available)
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationHydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
More informationPVC FOOT VALVE SKU: CV4674
SKU: CV4674 PVC-U Foot Check Valve Socket and BSP PVC-U Fuß Rückschlagventil Sockel und BSP PVC-U Pie válvula de retención del zócalo y BSP PVC-U pied Clapet Socket et BSP PVC Foot Check Valve - Socket
More informationINDEX. YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP - MLHP YMPW - YMR OMR - MLHR YMH - YMSE YMSS OMSS -
INDEX SECTION PAGE YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP MLHP YMPH OMPW DH H HP YMPW MLHPW YMR OMR MLHR YMRS OMH DS S HR YMH MLHH YMSY OMS 2 ALT MLHS/MLHSY YMSE 2 YMSS OMSS MLHSS YMSJ 2 bearingless
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationMODELS BMSY 154 (9.39) 125 (7.63)
MDES BMSY The BMSY series motor adapts the advanced RRTRC gear set design with DISC distribution fl ow and high pressure. These motors can be supplied with various options for multifunctional operations
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More information