UNIT ARMOUR 50 CPVC ARMOUR 75 CPVC ARMOUR 100 CPVC ARMOUR 100 CPVC INJECTION UNIT
|
|
|
- Marvin Bishop
- 5 years ago
- Views:
Transcription
1 UNIT ARMOUR 50 CPVC ARMOUR 75 CPVC ARMOUR 100 CPVC ARMOUR 100 CPVC Screw Diameter Injection Pressure bar Stroke Volume cc Max. Injected Weight (CPVC) gm Injection Rate cc/s Plasticising Rate (CPVC)@ Max. Speed g/s L/D Ratio no ~ ~ ~ ~ 10 Distance Between Platens - Max Distance Between Tiebars (H x V) 310 x x 3 10 x x 10 Clamping Platens (H x V) 55 x x x x Overall Dimensions ( L x W x H ) 0 x 1250 x x 1250 x x 1375 x x 1375 x lit lit ton reserves right to change specifications without prior notice. Phone: sales.i@windsormachines.com
2 UNIT ARMOUR 125 CPVC ARMOUR 150/ CPVC ARMOUR 150/ CPVC ARMOUR 150/0 CPVC Screw Diameter Injection Pressure bar Stroke Volume cc Max. Injected Weight (CPVC) gm Injection Rate cc/s Plasticising Rate (CPVC)@ Max. Speed g/s L/D Ratio no ~ ~ ~ ~ 500 Distance Between Platens - Max Distance Between Tiebars (H x V) x x x 0 x 0 Clamping Platens (H x V) 670 x x x x Overall Dimensions ( L x W x H ) 5375 x 110 x x 110 x x 110 x x 1525 x lit lit ton reserves right to change specifications without prior notice. Phone: sales.i@windsormachines.com
3 UNIT ARMOUR 150/0 CPVC ARMOUR 180 CPVC ARMOUR 180 CPVC ARMOUR 180 CPVC Screw Diameter Injection Pressure bar Stroke Volume cc Max. Injected Weight (CPVC) gm Injection Rate cc/s Plasticising Rate (CPVC)@ Max. Speed g/s L/D Ratio Distance Between Platens - Max. Distance Between Tiebars (H x V) Clamping Platens (H x V) Overall Dimensions ( L x W x H ) no. lit. lit. ton ~ ~ ~ ~ x 0 0 x 0 0 x 0 0 x x x x x x 1525 x x 1525 x x 1525 x x 1525 x reserves right to change specifications without prior notice. Phone: sales.i@windsormachines.com
4 UNIT ARMOUR 220 CPVC ARMOUR 220 CPVC ARMOUR 2 CPVC ARMOUR 350 CPVC Screw Diameter Injection Pressure bar Stroke Volume cc Max. Injected Weight (CPVC) gm Injection Rate cc/s Plasticising Rate (CPVC)@ Max. Speed g/s L/D Ratio no ~ ~ ~ ~ 650 Distance Between Platens - Max Distance Between Tiebars (H x V) 578 x x x x 710 Clamping Platens (H x V) 80 x x x x Overall Dimensions ( L x W x H ) 615 x 1825 x x 1825 x x 1825 x x 2050 x lit lit ton reserves right to change specifications without prior notice. Phone: sales.i@windsormachines.com
5 UNIT ARMOUR 50 CPVC ARMOUR 550 CPVC ARMOUR 550 CPVC ARMOUR 700 CPVC ARMOUR 700 CPVC ARMOUR 900 CPVC Screw Diameter Injection Pressure bar Stroke Volume cc Max. Injected Weight (CPVC) gm Injection Rate cc/s Plasticising Rate (CPVC)@ Max. Speed g/s L/D Ratio no ~ ~ ~ ~ ~ ~ 1100 Distance Between Platens - Max Distance Between Tiebars (H x V) 800 x x x x x x 1020 Clamping Platens (H x V) 1165 x x x x x x ( ) 30.1 ( ) 32.1 ( ) 32.1 ( ) 32.1 ( ) 32.1 ( ) Overall Dimensions ( L x W x H ) 9200 x 1850 x x 1950 x x 1950 x x 228 x x 228 x x 2500 x lit lit ton reserves right to change specifications without prior notice. Phone: sales.i@windsormachines.com
UNIT SPRINT 100 SPRINT 150 SPRINT 180
UNIT SPRINT 100 SPRINT 150 SPRINT 180 SPRINT 250 SPRINT 350 545 705 1480 2275 Screw Diameter mm 28 32 36 40 45 50 45 50 60 56 60 70 70 80 90 Injection Pressure bar 2344 1795 1420 2430 1920 1555 2160 1750
HITECH HYDRAULICS. 70 Tons Tons 60 gm gm HYBRID SERVO INJECTION MOULDING MACHINE. SERIES CNC TURNED
HITECH HYDRAULICS www.hitechimm.com www.hitechgroup.org www.hitechhydraulics.com INJECTION MOULDING MACHINES COMPLETE HYDRAULIC SOLUTIONS CNC TURNED PRECISION P A R T S ik S D KINETIC SERVO DRIVE SINGLE
Technical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
Electric. Efficient. Compact & precise. ENGEL e-mac
Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive
Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.
e-mac Electric. Efficient. Compact & precise.
e-mac Electric. Efficient. Compact & precise. All-electric. Best-in-class efficiency and precision to the max. All of the ENGEL e-mac s movements are performed by servo-electric drives. The all-electric
OUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES
RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email:
Technical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
PLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
IntElect highly precise. Technical description
IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping
The multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.
ENGEL e-motion TL. All-electric, tie-bar-less. be the first.
ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect
Technical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.
ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)
The ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18
ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
The High-Speed Benchmark. El-Exis SP. Maximum performance - Highest output
The High-Speed Benchmark El-Exis SP. Maximum performance - Highest output THE HIGH-SPEED BENCHMARK El-Exis SP 03 El-Exis SP The best combination for the fastest applications. For more than 25 years, Sumitomo
ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
PLASTIC INJECTION MOULDING MACHINES
1 PLASTIC INJECTION MOULDING MACHINES www.romi.com Plastic Injection Moulding Machines Romi EN Series sandretto CE Certified. Movements controlled by servo pump Romi EN 70 Romi EN 100 Romi EN 150 Romi
UPDATE AND MODERNIZE
HYDROTECH ENGINEERING, INC. 7 SARATOGA COURT BEACHWOOD, OHIO 44122 PHONE: (216) 831-3833 FAX: (216) 464-3722 E-MAIL: C.ORUM @ ATT.NET WEB SITE: WWW.hydrotecheng.com UPDATE AND MODERNIZE YOUR OUTDATED HPM
ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz
ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43
Lot no. Description. Page 1 of 6
Injection Moulding (Ends: 2016-07-19 14:00:00.0) An online auction of Various Plastic Injection Moulding Machines and an Ultrasonic Plastic Welder from different locations. Buyers Premium 15% VAT 20% Location
e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE
ewin ELECTRIC, EFFICIENT, COMPACT & PRECISE WINTEC A MEMBER OF THE ENGEL GROUP WINTEC A STRONG PARTNER NEARBY Based in Changzhou (Jiangsu Province), WINTEC is your reliable partner when it comes to economic
MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines
Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology
55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY
55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient Rugged & Reliable recise & Consistent Versatile & User Friendly Compact Mono Toggle Design Durable Mono-Toggle
Engel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
Highsun. Create with most. professional high-speed plastic solution. Time to go global
Highsun Time to go global Create with most professional high-speed plastic solution LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER
Haitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series
Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.
ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
RS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items
www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller
HYDRAULIC HOT PRESS BOTTOM MOVABLE PLATEN WITH AUTOMATIC LOADING/UNLOADING SYSTEM (2 + 2) Machine types: PU PRESS 12.5/1.
HYDRAULIC HOT PRESS BOTTOM MOVABLE PLATEN WITH AUTOMATIC LOADING/UNLOADING SYSTEM (2 + 2) Machine types: PU PRESS 12.5/1.5U (2+2) H Line components: A. Hot Hydraulic Press, Fixed Tray Plate. (1 No.) B.
GM Standard - GM 90.25
GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM
Specifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
ROMI EN SERIES PLASTIC INJECTION MOULDING MACHINES
ROMI EN 70 ROMI EN 100 ROMI EN 170 ROMI EN 220 ROMI EN 300 ROMI EN 380 ROMI EN 450 ROMI EN 600 ROMI EN 800 ROMI EN 1100 PLSTI INJETION MOULDING MHINES ROMI EN SERIES ROM Industrial omplex in Santa árbara
Modularity with a highperformance
Ace is a precision, high quality injection moulding machine made by TOSHIBA MACHINE. Ace connotes to accomplish a task with complete success. Modularity with a highperformance profile: Ace GenXt 400 to
www.woojinplaimm.com TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch 1. 1.26 1.2 1.7 1.77 1.97 Injection pressure psi 17.60 870.2 8217.8 091.16 2. 288.6 Theoretical
ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
Get a grip on inserts. ENGEL insert
Get a grip on inserts. ENGEL insert be the first. The right combination. ENGEL insert. n many challenges, teamwork is the key to success. This is the case where a number of people are working towards a
Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
Facts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
Specifications KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20170419-IV
BS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
ALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
ALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
TECHNICAL SPECIFICATION
FOR Diesel Power Plant (Doosan-MAN 9L21/31) DATE REVISION : November 2015 : 0 Head Office & Changwon Plant 18, Gongdan-ro 21beon-gil, Seongsan-gu, Changwon City, Kyeongnam, 642-370, South Korea Power Plant
ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
ALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
e-motion TL All-electric, tie-bar-less
e-motion TL All-electric, tie-bar-less ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution
ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
Operating Manual. Injection Moulding Machine type PLUS. Machine Type: PLUS 350 / 75. Machine No.: Year of manufacture: 2003
Operating Manual Injection Moulding Machine type PLUS Read before using the injection moulding machine and keep nearby for reference Machine Type: PLUS 350 / 75 Control Type: UNILOG B2 Machine No.: 25336
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
Solutions for the Packaging Industry. High Performance IML Automation
Solutions for the Packaging Industry High Performance IML Automation WITTMANN IML Automation Advantages A wide variety of solutions with top or side entry robot. A complete range of label magazines for
HAULMAAX 400/460 Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: July 2015 REVISION: I CONTENTS DESCRIPTION PAGE HMX 400/460... 2 Inboard Frame Bracket.... 4 Outboard Frame Bracket.... 5 DESCRIPTION PAGE Aftermarket Service Kits...
Spritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
MacroPower MC t The flexible large-molding machine. world of innovation
400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN
ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
ENGEL duo. ready for compact flexibility. be the first.
ENGEL duo ready for compact flexibility be the first. 2_ENGEL duo The bigger the requirements, the more sophisticated the solution. The ENGEL duo is compatible with any one of your concepts. Thanks to
SE-EV Advanced All-Electric Series
SE-EV Advanced All-Electric Series SE-EV Series Advanced All-Electrics Model sizes: 56, 84, 112, 146 and 202 U.S. tons New NC-10 control with Z-molding capabilities plus improved ease-of-use, processing
STANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching
Sub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200
L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure
SHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. UNITED KINGDOM OFFICE TEL: +44 (0)
MAYOENGINEERING LTD SHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. OFFICE TEL: +44 (0)1623 651102 E-MAIL: sales@mayoengineering.com WEB SITE: www.mayoengineering.com WE SPECIALISE IN SUPPLYING
2015 Yamaha 60hp 4 Stroke Manual
2015 Yamaha 60hp 4 Stroke Manual If looking for a book 2015 yamaha 60hp 4 stroke manual in pdf form, then you've come to the right site. We furnish the utter version of this book in txt, doc, DjVu, PDF,
Haitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
Mould Hydraulic Systems. Self-locking rod hydraulic cylinders 260 bar V260LK V260LK
Mould Hydraulic Systems Self-locking rod hydraulic cylinders 260 bar V260LK V260LK V260LKcat.GB01-2006 Self-locking rod hydraulic cylinders General Characteristics - Max. working pressure: up to 260 bar
Facts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
CREATING THE FUTURE!
WE ARE CREATING THE NEw CREATING THE FUTURE! DIESEL ENGINES AND DIESEL GENERATORS www.sinara-group.com www.sinaratm.ru 2 3 (EKATERINBURG, SVERDLOVSK REGION) Ural Diesel Engine Plant (UDEP) is a leading
ENERPAC HYDRAULIC PRODUCTS
ENERPAC Enerpac features the most comprehensive family of high-force products, distributed globally yet supported locally, to make you more productive and the work you do safer and easier to perform. Decades
MID TONNAGE. Van Dorn Caliber
MID TONNAGE Van Dorn Caliber V A N D O R N C A L I B E R THE POWER OF TWO Van Dorn and Demag Ergotech As a united force, Van Dorn and Demag Ergotech offer you, the customer, a number of advantages that
For the plastics machinery industry Manifold thermocouple Model TC47-MT
Electrical temperature measurement For the plastics machinery industry Manifold Model TC47-MT WIKA data sheet TE 67.21 Applications Plastics and rubber industry Hot runner manifolds for injection mould
FREEWHEELING INSTRUCTIONS
FREEWHEELING INSTRUCTIONS Freewheeling options with SAI motors. FREEWHEELING OPTIONS WITH SAI MOTORS: Freewheeling is the operation to drive a SAI motor disconnected from the hydraulic circuit. It is a
TESTER, DIESEL INJECTOR NOZZLE MODEL DT-1300/7008 (KIENE DIESEL ACCESSORIES, INC.) (NSN )
TM 9-90-623-&P TECHNICAL MANUAL OPERATOR S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST TESTER, DIESEL INJECTOR NOZZLE MODEL DT-300/7008 (KIENE DIESEL
ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100
LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600
Number of Candidates at Specified Grades and Percentage of Number Sat. Subject Number and Title/Centre Group Gender Number Sat
GA312 ART AND DESIGN SCHOOLS M 211 13 16 12 17 23 32 28 21 21 28 % 6.2 7.6 5.7 8.1 10.9 15.2 13.3 10.0 10.0 13.3 F 251 26 21 28 28 45 24 35 24 8 12 % 10.4 8.4 11.2 11.2 17.9 9.6 13.9 9.6 3.2 4.8 M&F 462
Chemical Injection Pumps and Products
Chemical Injection Pumps and Products API 675 PERFORMANCE W High Pressure High Flow Plunger V Dual Seal Plunger X Dual Seal Plunger LD Low Pressure Diaphragm WILROY Hydraulically Actuated Diaphragm Pumps
OSP. General Purpose Jacks - Plain Ram, Single Acting (Type - Spring Return) Features / Application Multipurpose jacks.
OSP General Purpose Jacks - Plain Ram, Single cting (Type - Spring Return) 5-400 ton Stroke 50-00 mm ax. Working Pressure 700 bar ultipurpose jacks Gland Nut designed to withstand dead end load ase mounting