STANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
|
|
- Alison Brown
- 5 years ago
- Views:
Transcription
1 IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching Attachment with split dove tail mounting 14 Punch and Die sets 8" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of Knives [4 way] CAPACITIES & SPECIFICATIONS: MODEL P TON Throat 8" Open Height 13-1/2" Depth Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block 10.5 Stroke Length 4-1/4" System R/V 2600 PSI Round(Min. to Max.) Square (Min. to Max.) 1/4" to 1-1/2" 1/2 " to 1" Motor STD. 230/ rpm 10 HP 3 Phase 50 Tons Max. 13/16" thru 3/4" Material *5" thru 1/8" Max. Hole 10"X17" *Special Tool Platen Table Size (D-W) (NET) W-L- 24 "x66"x60" H Bending Attachment 8" Strokes Per Minute Optional Lengths Available Weight (NET) lbs /2" Angle Shear (Max.) w/special Blade /4" x 4" x 1/4" 15" Long 3/4" x 10" 5/8" x 15" 5" x 5" x 3/8" 4" x 4" x 1/2"
2 The Piranha Model P-70 extends your work week. putting more power, more precision on the job, day after day. The P-70 features Automatic Urethane Punch Strippers and Bar, Plate and Angle Shear Hold Downs to assure precise cuts and longer punch and blade life. Complete Punching Attachment with split dove tail mounting 12" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of Knives [4 way] Extra Blank Knife to extend shear to 18" CAPACITIES & SPECIFICATIONS: MODEL P TON Throat Depth 10" Open Height 15" Closed Height w/o Die Block 10-1/8" Work Stations From Floor 42" Stroke Length 4-7/8" 1/4" to 1-1/2" 1/2 " to 1" 70 Tons 1-3/16" thru 3/4" *4-1/2" thru 3/16" 12"X21" 31 "x79"x64" 15 HP 3 Phase /2" x 5" x 3/8" 18" Long 1" x 6" 3/4" x 12" 1/2" x 18" Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 4250 Strokes Per Minute 3/4" Angle Shear (Max.) 5" x 5" x 1/2"
3 The Piranha P90 is the workhorse of the industry. Its six (6) workstations are designed for ease of operation featuring Automatic Material Hold Downs and Punch Strippers. If your fabrication requirements include punching high tonnage holes and shearing ¾" or thicker plate, the P90 is the ideal machine for you. Complete Punching Attachment with split dove tail mounting 12" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of Knives [4 way] Set of 20.5" Knives [4 way] (instead of Round Bar Knives and " Knives) Extra Blank Knife to extend shear to 20.5" CAPACITIES & SPECIFICATIONS: MODEL P TON Throat Depth Closed Height w/o Die Block 12" Open Height 15-1/2" 10-1/4" Work Stations From Floor 44" Stroke Length 5-1/4" /2" to 2" 1/2 " to 1-3/8" 15 HP 3 Phase 90 Tons 1-1/8" thru 1" *5" thru 3/16" 14-1/2"X21" 95 4" x 6" x 3/8" Bending Attachment 12" 20-1/2" Long 35 "x90"x66-1/2" 1" x 12" 3/4" x 18" 1/2" x 20" Optional Lengths Available Weight (NET) lbs 5800 Strokes Per Minute 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
4 The Piranha P120 is the largest single operator ironworker that Piranha has manufactured. Piranha's 50, 70 and 90 ton models have long dominated the market, but the industry has demanded an extension of that line with increased capacities. The P120 has 120 tons of punching capacity and can punch a 1 1/2" hole in 1" material or a 5" hole in 1/4" material. If your fabrication requirements include additional capacities than the P90 offers, the P120 is the ideal machine for you. Complete Punching Attachment with split dove tail mounting 12" Bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of Knives [4 way] Set of 20.5" Knives [4 way] (instead of Round Bar Knives and " Knives) Extra Blank Knife to extend shear to 20.5" CAPACITIES & SPECIFICATIONS: MODEL P TON Throat Depth 12" Open Height 15-1/2" Closed Height w/o Die Block 10-1/4" Work Stations From Floor 44" Stroke Length 5-1/4" 1/2" to 2" 1/2 " to 1-3/8" 20 HP 3 Phase 120 Tons 1-1/2" thru 1" *5" thru 1/4" 14-1/2" x 21" 95 4" x 6" x 3/8" Bending Attachment 12" 35 " x 90" x 68-1/2" Optional Lengths Available Weight (NET) lbs /2" Long 1" x 12" 3/4" x 18" 1/2" x 20" Strokes Per Minute 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
5 The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24" plate shear capacity. Complete Punching Attachment with stripper Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of " Knives [4 way] Set of Blank Knives to extend shear to 24" Set of Angle Shear Knives [8 way top] [4 way bottom] Chip Buckets (coper end) Coupling Wrench Intergral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL PII TON Throat Depth 9" Open Height 14" Closed Height w/o Die Block 7-3/4" Work Stations From Floor 41" Stroke Length 7" 1/4" to 1-1/2" 1/2 " to 1" 88 Tons 1-1/16" thru 1" *5" thru 3/16" 11" x 38" 38 "x90"x72" Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 4700 Strokes Per Minute 1" Angle Shear (Max.) w/special Blade 10 HP 3 Phase /4" x 4" x 1/4" 24" Long 3/4" x 8" 5/8" x 12" 1/4" x 24" 5" x 5" x 3/8" 4" x 4" x 1/2"
6 The Piranha Model PII-140 have dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch stations allow the use of a virtually unlimited range of standard accessories and special tooling. Complete Punching Attachment with stripper Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 2") Set of 14.5" Knives [4 way]: For PII-110 Set of " Knives [4 way]: For PII-140 Set of 20.5" Knives [4 way] instead of Round Bar Knives and " Knives: For PII-140 Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on PII-140 Set of Angle Shear Knives [2 way top] [4 way bottom] Chip Buckets (coper end) Coupling Wrench Intergral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL PII TON Throat Depth 20.5" Open Height 14" Closed Height w/o Die Block 7-3/4" Work Stations From Floor 44" Stroke Length 7" 1/2" to 2" 1/2" to 1-3/8" 140 Tons *1-3/4" thru 1" 5-5/16" 16" x 36" 38 "x120"x85" 20 HP 3 Phase 95 4" x 6" x 3/8" 20-1/2" Long 1" x 14" 3/4" x 18" 1/2" x 20" Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 11,930 Strokes Per Minute (Approx.) 1" Angle Shear (Max.) 6" x 6" x 5/8"
FINTEK INDUSTRY IRON WORKERS FINTEK IRON WORKER DOES ALL
FNTEK NDUSTRY RON WORKERS FNTEK RON WORKER DOES ALL WHEN T COMES TO VERSATLlTY."FNTEK" RON WORKER S YOUR BEST HELP N SHEET METAL APPLCATONS. THE N-BULT MULT-PURPOSE MECHANSM COMBNES MANY FABRCATNG ACTONS
More informationHYDRAULIC. IRONWORKERS SW-Series
HYDRAULIC IRONWORKERS SW-Series IRONWORKERS Every Machine Has 5-Station Versatility Built In Station Baileigh Industrial offers the highest quality Ironworkers on the market today. Our 50 ton, 62 ton,
More information40 Ton and 50 Ton Ironworker
40 Ton and 50 Ton Ironworker 40 TON THE SHOPMATE 4 Workstations Maximum capacity: 1" diameter in 1/2" plate 40 Ton and 50 Ton Ironworker Throat depth: 7" Stroke: 1" Work Height: 38-1/2" Open Station Throat
More informationMADE IN THE USA SINCE product catalog
product catalog YOUR IS YOUR REPUTATION. That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what
More informationSINGLE & DOUBLE CYLINDER
Leading Technology HYDRAULIC IRON WORKERS SINGLE & DOUBLE CYLINDER SERIES www.hilalsan.com.tr www.hilalsan.com.tr Founded in 1984, HILALSAN has started with manual sheet metal shears and now continues
More informationw w w. m a r v e l s a w s. c o m
Quality Machines by Vertical Band Saws Series 8 Mark III Miter cuts up to 60 with optional power column tilt. Column adjustable from 90 to 3 canted. Capacity: 18 X 22 (457mm x 560mm) at 45 18 x 14.5 R,
More informationINSTRUCTIONS AND REPAIR PARTS MANUAL FOR. IRONWORKER MODEL NUMBER P-140 Publication: April,
INSTRUCTIONS AND REPAIR PARTS MANUAL FOR IRONWORKER MODEL NUMBER P-140 Publication: April, 2013 For Serial Numbers P140-3001 to Current Models www.megafab.com 800-338-5471 Be sure to register your model
More informationINSTRUCTIONS AND REPAIR PARTS MANUAL FOR. IRONWORKER MODEL NUMBER P50 Publication: April,
INSTRUCTIONS AND REPAIR PARTS MANUAL FOR IRONWORKER MODEL NUMBER P50 Publication: April, 2013 For Serial Numbers P50-13,000-Current to Current Models www.megafab.com 800-338-5471 Be sure to register your
More informationIRONWORKERS & PUNCHING MACHINES
HYDRAULIC IRONWORKERS & PUNCHING MACHINES Multi-Function Excellent Quality Economical Investment ISO 9001 INTRODUCTION With a highly dedicated team, Sunrise Fluid Power Inc. has been specializing in the
More informationJANUARY - JUNE TON IRON WORKER $18,899 $13,999 $7,899 $1,049 $3,099 $170 $389 FOR MORE INFORMATION
JANUARY - JUNE 2018 65 TON IRON WORKER $18,899 SEE PAGE 66 GEARED HEAD BENCH LATHES CYCLONE DUST COLLECTOR 110 TON SHOP PRESS WITH PLC $7,899 $1,049 $13,999 WITH SEE PAGE 22 TRADESMAN VISE TRADEMARKED
More informationCONTENTS BUILD YOUR LEGEND YOUR WORK IS YOUR REPUTATION AND SO DO WE. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO.
YOUR WORK IS YOUR REPUTATION That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what it means to
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationPNEUMATIC PRESSES. pneumatic presses DESCRIPTION FEATURES AND OPTIONS
3 DESCRIPTION Air-Mite has been manufacturing since 1952. We are continuously improving the durable, time-tested design of our presses PRESS SELECTION that they exert. From the smallest DPS4 model, which
More informationMODERN TECHNOLOGY IN PUNCHING AND SHEARING
MODERN TECHNOLOGY IN PUNCHING AND SHEARING SOLUTION The GEKA HYDRACROP range of hydraulic steelworkers have been designed by highly experienced engineers with the support of powerful CAD equipment, culminating
More informationIW SERIES VN SERIES DLC SERIES. Iron Worker. Corner Notcher. L Angle Processing Center. The Winning Force
The Winning Force IW SERIES Iron Worker VN SERIES Corner Notcher DLC SERIES L Angle Processing Center Reliable Efficient Ergonomic High Capacity Low Investment Cost The Winning Force As a total supplier
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationPRESS BRAKES & SHEARS
PRESS BRAKES & SHEARS THE PIRANHA PRESS BRAKE DIFFERENCE The difference is in the design. Piranha s Fabrication Series Press Brakes combine a heavy-duty mechanical linkage system with Piranha s exclusive
More informationFabrication Series Hydraulic Press Brake 14' x 242 Tons
Box 20, Grp. 200, RR2, 390 Eagle Drive, Winnipeg, MB R3C 2E6 Canada Toll Free 800-665-8089 Ph: 204-779-7791 Fax: 204-779-7796 Email: sales@empire-machinery.com December 18, 2017 Technical Specifications:
More informationPRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES
PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES A Tradition of Quality and Value since 1899 DREIS & KRB MP
More informationBASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) 91-97802-00007, 9315-11111 info@basantgroup.com www.basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS
More informationTotal sheet metal working.
202 Total sheet metal working. There is barely any field of application for which FEIN power cutting tools do not offer the perfect solution. They cut through metal, metal alloys, non-ferrous metals and
More informationMODEL DO-70/110-24M IRONWORKER
MODEL DO-70/110-24M IRONWORKER SCOTCHMAN INDUSTRIES PHILIP, SOUTH DAKOTA 57567 PRINTED NOVEMBER 2010 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 4 2.1 Warranty
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears Sheet Metal. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationAccessories Catalogue
Accessories Catalogue GEKA ACCESSORIES Since 1919, GEKA Group has been manufacturing Ironworkers for angle work, flats and profiles - for black iron, metal workshops, metal constructions, telecommunication
More informationJMT has partnered with Portugual-based Adira to bring you the state-of-the-art fully electric JMT-EB Eco Bend model press brakes.
JMT has partnered with Portugual-based Adira to bring you the state-of-the-art fully electric JMT-EB Eco Bend model press brakes. The Eco Bend is fast, simple to operate and service, and will save you
More informationMULTI HYDRAULIC STEELWORKER
MULTI HYDRAULIC STEELWORKER MULTI 3 2 1 4 5 Hydraulic steelworker The Kingsland Multi range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for
More informationMODEL EC IRONWORKER
MODEL 50514-EC IRONWORKER PRINTED NOVEMBER 2018 Page 1 Page 2 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 4 2.1 WARRANTY 5 3.0 WARNING LABELS 6 4.0 INSTALLATION
More informationE08 - E10. Compact Excavators
E08 - E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More information- Quick ejector Tie-in system
- Quick ejector Tie-in system 3-Inch 2-Inch 1 3 8-Inch 1-Inch High Strength FasTie s U.S. Patent No. 6,379,072 FasTie s Description & Use In an injection molding press, the FasTie system quickly tiesin
More informationMODEL M IRONWORKER
MODEL 9012-24M IRONWORKER PRINTED JANUARY 2012 Page 1 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 4 2.1 WARRANTY 5 3.0 WARNING LABELS 8-9 4.0 INSTALLATION & SET-UP
More information307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.
307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More information3M Assembly Equipment
M Assembly Equipment M TM Presses and Accessories All M TM Assembly Presses are designed to provide proper assembly on M TM Cable and Connectors. These presses, along with a locator plate, achieve accurate
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More informationCone 900. C900 Standard/Metric. Specification. Omron/CoastOne software
Built in Finland, CoastOne press brakes are designed to surpass the exacting requirements of today s high-tech fab shops. Every CoastOne comes equipped with the highest quality linear guides and fast,
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationManufacturing uptime for more than 70 years.
Manufacturing uptime for more than 70 years. We design our hydraulic presses, press brakes and shears to help drastically reduce downtime. 618-262-8666 pacific-press.com Press Brakes In addition to providing
More informationHydraulic & Manual Tools
Hydraulic & Manual Tools Flexible Busbar and Copper Busbar Manipulation and Transformation Solutions 2 nvent.com/eriflex TABLE OF CONTENTS HYDRAULIC TOOLS Hydraulic Busbar & Flexibar Work Center... 04
More information306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg
306E Mini Hydraulic Excavator Engine Weights Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) 306E Features Increased Performance
More informationStandard Accessories for HA
MODEL HA06-322 HA06-322 É 26.5 200 324. Specifications Model HA06-322 38 Max. Throat Depth Punching Capacity (for Mild Steel) Diameter Thickness 2-3/8" (60) 7/8" (22) /2" (3) 76 2 50.5 83 30 4.5 24 60.
More informationHYDRAULIC & MANUAL TOOLS FLEXIBLE BUSBAR AND COPPER BUSBAR MANIPULATION AND TRANSFORMATION SOLUTIONS
HYDRAULIC & MANUAL TOOLS FLEXIBLE BUSBAR AND COPPER BUSBAR MANIPULATION AND TRANSFORMATION SOLUTIONS ELECTRICAL 2 TABLE OF CONTENTS HYDRAULIC TOOLS Hydraulic Busbar & ERIFLEX FLEXIBAR Work Center...04
More information301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Net Power 13.2 kw 17.7 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
More informationMODEL M IRONWORKER
MODEL 12012-24M IRONWORKER PRINTED JANUARY 2016 Page 1 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 5 2.1 WARRANTY 7 3.0 WARNING LABELS 8 4.0 INSTALLATION & SET-UP
More information303E CR. Mini Hydraulic Excavator
303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E
More information303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp
303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E
More informationSUPERIOR DESIGN FOR SHEARING ACCURACY
SHEAR POWER SUPERIOR DESIGN FOR SHEARING ACCURACY Unique Hydra-Mechanical Rocker Arm Drive System This design, unique to the Accurshear, delivers the strength, power and rigidity of the guillotine system
More information301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Gross Power 17.9 kw 24.3 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
More informationC N C. S y n c h r o. H y d r a u l i c
C N C S y n c h r o H y d r a u l i c P r e s s B r a k e E n g i n e e r e d t o p e r f e c t i o n... CNC Press Brake CNC Controller 5 CNC Controller 7" Full Colour TFT Touch Screen Display - Selection
More informationproduct catalog 800 FORM911 ( ) durmausa.com DURMA
product catalog Better Parts Better profits 800 FORM911 (367-4911) durmausa.com HD-F/l Series lasers standard equipment Siemens 840D CNC Controller Laser source (Resonator) High pressure cutting option
More information301.7D CR. Mini Hydraulic Excavator
301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating
More informationYANMAR 12.9 HP DIESEL ENGINE SAFETY TWO
12 Small and powerful The 12 is a completely new concept: small enough to pass through a door. Robust enough to do jobs above its category. An exceptional machine. With its 12.9 hp engine and digging depth
More informationRAPID, PRECISE HYBRID PRESS BRAKE
BENDING RAPID, PRECISE HYBRID PRESS BRAKE RAPID, PRECISE HYBRID PRESS BRAKE A COMPLETE SOLUTION FOR HIGH SPEED, HIGH PRECISION BENDING REQUIREMENTS The HG series is a high end bending solution, designed
More informationENGLISH (mm) PUMA SERIES PORTABLE PUNCHING MACHINES
ENGLISH (mm) PUMA SERIES PORTABLE PUNCHING MACHINES PUMA SERIES The GEKA hydraulic punching machines have been designed by experienced technicians, assisted by powerful CAD CAM equipment and adapted to
More informationUser Guide: Lit-L-Loc Units
733705BA User Guide: Lit-L-Loc Units Covers Standard Lit-L-Loc Style Hand Held Clinch Units. www.btmcomp.com 810-364-4567 LIT-L-LOC UNITS IMPORTANT! - Read this manual completely prior to operation of
More information4-rolls FOMP /16
4-rolls FOMP 4000 20/16 Length mm 4000 Central roll diameter mm 460 Lateral rolls diameter mm 380 Bending thickness mm 20 Pre-bending thickness mm 16 This machine is available equipped with: - Hydraulic
More informationAccepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
More informationQUALITY FROM THE CUTTING EDGE OF FABRICATION
BENDING EFFECTIVE July 2005 QUALITY FROM THE CUTTING EDGE OF FABRICATION TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 88º & 90º PUNCHES - - - -
More informationRAPID, PRECISE HYBRID PRESS BRAKE
BENDING RAPID, PRECISE HYBRID PRESS BRAKE RAPID, PRECISE HYBRID PRESS BRAKE A COMPLETE SOLUTION FOR HIGH SPEED, HIGH PRECISION BENDING REQUIREMENTS The HG series is a high end bending solution, designed
More informationRefinishing precombustion chamber sealing surface
01-410 Refinishing precombustion chamber sealing surface Preceding work: Nozzle holder removed (01-417). Precombustion chamber removed (01-417). Operation no. of the operation texts and work units or standard
More informationServo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationSpartanics M500 PRESS SPECIFICATIONS. Strokes per Minute
M500 PRESS SPECIFICATIONS 5 Ton 3 10 TonCE 15 TonCE 20 TonCE 30 TonCE 30 Ton DTCE 40 TonCE 50 TonCE 50 Ton DTCE 75 TonCE Normally Stocked In Inventory 1 No No No Yes Yes Yes No Yes No No Strokes per Minute
More informationProduct Brochure For K058. Description. Features. Auckland: (09)
HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00
More informationRousselle Single Point Gap Frame (Cast Iron)
Single Point Gap Frame 15 to 110 Tons Rousselle Single Point Gap Frame (Cast Iron) Standard Features Cast Frame Air Clutch and Shoe Brake Crankshaft Motion (40 Ton and Up) Eccentric Shaft Motion (15 and
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationPRESSES INTRODUCTION THE SIMPLEX PRESS THE SIMPLEX PLUS. Moveable work head allows movement across the entire length of the top cross bar.
INTRODUCTION PRESSES THE SIMPLEX PRESS Double pinned & welded construction for strength & safety. Friction brake winch for easy adjustment of work bed. Will not drop if handle is released. Moveable work
More informationPUNCH RANGE HYDRAULIC PUNCHING MACHINE
PUNCH RANGE HYDRAULIC PUNCHING MACHINE PUNCH RANGE Punch station-applications (optional equipment) Minimum deform stripper assembly Minimum deform stripper assembly to give minimum deformation while punching
More information305 CR. Mini Hydraulic Excavator
305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationAIRAM Press Co. LTD Industrial Court Covington, OH
AIRAM Press Co. LTD. 2065 Industrial Court Covington, OH 45318 www.airam.com TONNAGE RANGES 100 Ton Press 3 Ton Press Press Tonnage Ranges from 3 to 210 Tons Several Options available to include feeds,
More informationDISTRIBUTED BY: 8960 Evergreen Blvd. Minneapolis, MN PHONE: (612) FAX: (612)
SPECIFICATIONS AUTO-SERT SPECIF. AS-7.5/20 THROAT AS-10/20 THROAT AS-7.5/36 THROAT AS-10/36 THROAT TONNAGE CAPACITY Minimum 350 lbs. Minimum 350 lbs. Minimum 350 lbs. Minimum 350 lbs. Maximum 15,000 lbs
More informationACCURPRESS HYBRID Precision Forming Systems
ACCURPRESS HYBRID Precision Forming Systems www.accurpress.com Accurshear Original CNC Accurpress 1990 Original Accurshear 1976 Original Accurpress 1975 ABOUT US With over 40 years in the marketplace,
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationAMADA have compiled some useful data which may assist engineers in the daily business of sheet metal design and production. Page
Contents AMADA Section AMADA have compiled some useful data which may assist engineers in the daily business of sheet metal design and production. Page 128 129 129 130 Punch Press Tonnage Calculation Minimum
More informationBattery Operated Compression Tool
ECO-50 Battery Operated Compression Tool Ram stroke : 15 mm Applicable Hex Compression : Max. 150mm2 Cu Lugs 52 kn 397 (L) x 79 (H) x 70 (W) mm 2.3kg (less battery) 3.1kg (with battery) ECO-50 The ECO-50
More informationPh: 1-(800) or (204) Fax: (204) Website:
JUST ARRIVED! Sahinler Press Model AP 1520-150 165 Ton Pressing Force 12 Stroke 60 Working Width 3/8 Bending Capacity (Punch and 4 Way Die Included) 24 x 60 Bed Area 15 HP Motor 220/3/60 New sells for
More informationAD-SERVO HYBRID PRESS BRAKES
AD-SERVO HYBRID PRESS BRAKES It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT machines
More informationTS / TSX. TS / TS(X) Hydraulic guillotine shears Sheet Metal. For Impressive Performances
TS / TSX TS / TS(X) Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 All HACO shears are recognised for being well-built, accurate and costeffective, meeting the demand
More informationRoll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page
Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationNew CMT Euro Pro Eco Series Euro Pro 135 ton x 3200mm - 7 AXIS
INFORMATION SHEET Page 1 Showroom: 123 Bluestone CCT 17 Mile Rocks Qld 4073 Postal: P.O. Box 3205 Darra Qld 4076 Tel: 07 3279 3344 Fax: 07 3279 3364 Email: sales@completemachinetools.com.au Website: www.completemachinetools.com.au
More information:45 Pagina 5 Clamping
Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More information324D/ 324D L. Hydraulic Excavator. Engine Engine Model. ACERT Technology. Net Flywheel Power Weights. Std. Undercarriage. Long Undercarriage
D/ D L Hydraulic Excavator Engine Engine Model Net Flywheel Power Weights Operating Weight Std. Undercarriage Operating Weight Long Undercarriage Cat C with ACERT Technology 0 kw 0 kg 0 kg Engine Engine
More informationBENDING ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER
BENDING ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER VASTLY REDUCED DAILY SETUP TIMES RAPID TURNAROUND BETWEEN JOBS Amada engineered the
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationS305/S320 S325/S340 S365/S390
S305/S320 S325/S340 S365/S390 Mobile Scrap and Demolition Shears S320 312B L Reach Boom Mounted * Must be operated with Dozer blade and stabilizer down or two sets or stabilizers down. S325 318B L 320B
More informationAdding performance to the industry. Widest Range of Machines installed with proven performance AN ISO 9001:2000 CERTIFIED COMPANY.
Adding performance to the industry We at Energy Mission believe to deliver high quality products at competitive price supported by best service support. To achieve this mission, we have developed inhouse
More informationAH Mini-Cat Air Powered Hoists with Pendant and Cord Controls and Hook Suspension
AH Mini-Cat Air Powered Hoists with Pendant and Cord Controls and Hook Suspension The AH Mini-Cat Series of air hoists was designed with exceptionally low headroom and will easily handle many construction,
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More informationET65. ET65 small turn excavator powerful and agile. Tracked Conventional Tail Excavators
ET65 Tracked Conventional Tail Excavators ET65 small turn excavator powerful and agile The minimum swing radius ET65 track excavator is powered by an economical 58.6-hp Perkins Tier 4 Final engine. It
More informationTechnical specifications. ET145 Tracked Conventional Tail Excavators. Compact excavator in a new weight class - ET145
ET145 Tracked Conventional Tail Excavators Compact excavator in a new weight class - ET145 The ET145 is a compact excavator designed for power and productivity. This 14-ton excavator combines the productivity
More informationWALK BEHIND. Reinforced Frame and Axle Strongest in its class. Four V-Belts Transferring maximum power to the blade shaft.
C1320P Gasoline small push saws PRODUCT FEATURES Spindle-Saver Blade Flanges Allows blade to sit on inner flange instead of shaft for replacement of flange only instead of complete shaft. Four V-Belts
More informationDoosan Infracore DX700LC TECHNICAL DATA
Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)
More informationRAPID, PRECISE HYBRID PRESS BRAKE
BENDING RAPID, PRECISE HYBRID PRESS BRAKE RAPID, PRECISE HYBRID PRESS BRAKE A COMPLETE SOLUTION FOR HIGH SPEED, HIGH PRECISION BENDING REQUIREMENTS The HG series is a high end bending solution, designed
More informationNon-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
More informationCOMPANY HISTORY Di-Acro Metal Fabrication Equipment
COMPANY HISTORY Di-Acro Metal Fabrication Equipment For more than sixty years, Di-Acro Inc. has served the metalworking industry producing metal fabricating equipment. We ve maintained the same traditional
More informationPRESS BRAKES. Flexible Bending Solutions. It s difficult to compete in today s world with yesterday s technology. We have solutions.
FBS PRESS BRAKES Flexible Bending Solutions It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE)
More informationDoosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
More information