JMT has partnered with Portugual-based Adira to bring you the state-of-the-art fully electric JMT-EB Eco Bend model press brakes.

Transcription

1

2 JMT has partnered with Portugual-based Adira to bring you the state-of-the-art fully electric JMT-EB Eco Bend model press brakes. The Eco Bend is fast, simple to operate and service, and will save you money on your energy bill. We developed this brake using a Hexa-C structure that assures the precise movement of the upper beam, it delivers accurate bends stroke after stroke. Available with various options and accessories, the JMT-EB is a total solution for your bending needs. JMT-EB 2512 JMT-EB JMT-EB 5020 JMT-EB w/o Covers

3 Technical Specifications JMT-EB (version 1.4.0) JMT-EB 2512 JMT-EB 5020 JMT-EB Bending Force Tons Working Length Ft/In Distance between Frames Ft/In Max. Stroke Inch Max. Open Height without Tooling Inch Throat Depth Inch Motor Power HP 10 2 x 10 4 x 10 Approach Speed IPM Working Speed IPM * * 23.6 Return Speed IPM Stroke of X-axis X1-axis Inch 19.7** 24.6*** 24.6* 3.9* Speed of X-axis X1-axis IPM 1181** 1890*** 1890* 236* Stroke of R-axis Inch 5.9** 7.9*** 7.9* Speed of R-axis IPM 118** 472*** 472* Stroke of Axes Z - Z1 / Z2 Inch variable variable 82.6* Speed of Axes Z - Z1 / Z2 IPM 1535** 2362*** 1890* Standard Dimensions (Length) Inch Standard Dimensions (Width) Inch Standard Dimensions (Height) Inch Weight LB 7,606 11,023 * Available with Variospeed option or in countries which do not require EC certifi cation. ** Characteristics of the BG1 series back gauge. Other confi gurations are available on request (please refer to the attached datasheets). *** Characteristics of teh BG3 series back gauge. Other confi gurations are available on request (please refer to the attached datasheets).

4 Highlighted Features The motion of the upper beam is controlled by special Ecodrive drives. These drives feature: A ball screw, gear unit and servo motor with overload protection for reliable performance; All components have been sized for extended lifetime; Each drive is equipped with an automatic lubrication system; Servo-motors controlled by the DNC ensure the precise stopping point of the ram for accurate bending depth. The ADControl 10 numerical control features: Bend angle programming accurate to degrees; Tonnage calculation for bending with the selected tooling; Tooling library programmed for the geometric characteristics of specifi c punches and dies; Brushless high performance servo-motor with overload protection; Slow approach option in Inch Mode to allow for tooling adjustment. Independent positioning of the moveable beam, bending depth is independent of bending length. Ultra-fast cycle times. Cycle time reductions can be as much as 40% faster than conventional press brakes, depending on the type of job. Sturdy mono-block Hexa-C frame. The frame is welded and stabalized in such way that the upper beam guides are independent from the main structure of the machine. This patented technology ensures superior bending precision under load. JMT-EB 5020

5 The Hexa-C frame ensures high bending precision especially for thinner materials. Motors are positioned close to the machine center for better load distribution, which improves the pumping effi ciency. Energy savings over conventional press brakes. Sixty percent (60%) of the operator s time is spend handling material pieces, during this time our electric press brake is consuming zero energy. Our machines are economical and ecological, fulfilling the EcoDesign directive.

6 Standard Equipment Our machines are equipped with a numerical control ADControl 10. This controller has 2 axes (Y & X) on the JMT-EB 2512 model and 3 axes (Y1/Y2 and X) on the JMT-EB 5020 model. It features a 7 TFT touch screen, 2D programming and simulation, bending sequence optimizer, backup/update of programs and tooling via LAN or USB, and 2 ports (RS232). LazerSafe system with 3 beams monitored automatically by an integrated security system that shuts down the machine when the beam is broken.

7 Back guage head includes two high-precision ball screws and is driven by a DNC controlled brushless servo-motor. JMT-EB 2512 Back gauge JMT-BG1 JMT-EB 5020 Back gauge JMT- BG2 Electric cabinet and motors. Our machines are built using electric components from leading multinational suppliers, which assures top quality performance of our gears. In addition, replacement parts are readily available from local suppliers throughout the world. Side guards with doubled and supervised electrical interlock. This way the operator can see the workstation at all times. Rear guards witlh light curtain. Manual quick clamp punch-holders.

8 Standard Workstation. Other Components. 2 simple support arms running on rail (500 mm long). Foot switch control. Electric cabinet with doubled and supervised safety. One set of maintenance tools. Instruction Manual for the press brake. Instruction Manuals for the CNC control.

9 Optional Equipment Optional Controllers ADControl 15, allowing up to 6 axes, with 7 TFT touch screen, backup/update programs and tooling via LAN or USB, 2 ports (RS232). ADControl 50, allowing multiple axes, with touch screen and alpha-numeric keyboard, backup/update programs and tooling via LAN or USB, 2 ports (RS232) with expansion possibility through a USB port. Cybelec 880S, allowing control of 4 to 7 axes depending on the model, with 10 color TFT touch screen, 2D programming software, backup/update programs via USB, almost unlimited quantity of programs and sequences. Cybelec ModEva 15 allowing control of 18 axes, with 15 TFT touch screen, 2D offline programming software with simulation of tooling and 2D bending, direct programming of bending angle, calculation of force, network connection capability (RJ 45) for data transfer and backup. Delem 56 control, allowing up to 4 axes, with 10.4 screen, 2D graphic programming, USB connection and bending sequence determination. Note: If you have any questions about your choice of available equipment options or compatibility between various options, a JMT application specialist can assist you.

10 Optional Software Adbend Pro Software is an advanced bending program that enables the user to do advanced 3D programming with detailed simulation. This software program can help you optimize the work sequence by detecting collision points and eliminating errors, resulting in a shorter work cycle. This software substantially increases productivity by reducing job set-up time and the number of program adjustments. Optional Safety Laser The Block Laser LZS-005 safety laser is an advanced operator protection system that prevents accidents and increases machine productivity. This safety system meets the most stringent international saftey standards (category 4 compliant). It is designed for integration with Laser Safe s Press Control Safety System. With the LZS-005 the operator can safely work next to the tools as they close at high speed without fear. The beam speed and stopping action are continuously monitored. No operator intervention is required since the program automatically sets and monitors the mute point. The operator does not need to make any manual checks or adjustments, which increases productivity. Guard modes can be selected directly from the CNC bend program. The Tray & Box mode allows for safe, high-speed bending of complex shapes. The Soft Stop setting reduces wear and tear on the hydraulic system. During tools changes, the laser transmitter and receiver can be moved easily and quickly. The LZS-005 provides maximum safety and productivity.

11 Optional Back Gauges JMT offers a variety of back gauge confi gurations to meet your different fabrication needs. You can upgrade the back gauges on your JMT Eco Bend press brake at any time if you fi nd you need additonal axes. Back gauge type JMT-BG2 with R axis (2 motorized back gauge heads) Back gauge type JMT-BG2 with Z1/Z2 axis Back gauge type JMT-BG3 with 4 axes (X + R + Z1/Z2). Back gauge type JMT-BG3 with X & R axes only for JMT-EB5020. This superior strength back gauge bar moves vertically and can perform precison work on thicknesses greater than 2 mm. Back gauge type JMT-BG3 with 5 axes (X/X1 + R + Z1/Z2). Back gauge type JMT-BG1T with 6 axes (X1/X2 + R1/R2 + Z1/Z2).

12 Optional Supports 2 Rail Support Arms with brushes, 500 mm length (not optional for JMT-EB 2512 model) Bending Follower JMT-BF (not optional for JMT-EB 2512 model) Extra Rail Support Arm, with brushes, 500 mm length, also available. Ergonomic Kit

13 Optional Tooling & Clamping Kit II (180 mm table length) Kit III (central slot table) Optional version for 90 mm dies Standard Tooling Kit Fast clamping holders with frontal insertion (Speed Grip manual)

14 Pneumatic clamping of the punch (European style) Pneumatic clamping of the die (European style) Mechanical W Pro TX clamping system for punch (WILA style) Mechanical W Pro Ty clamping system for die (WILA style) Hydraulic W Pro Clamping system for punch (WILA style) Hydraulic W Ty clamping system for die (WILA style) Angle measurement system (integration only with ADControl 50)

15 Other Options Variospeed System allows for bending speed up to 30 mm/s resulting in cycle time savings. (Only integrates with ADControl 50) Digital Bevel Gauge - Wizard-on-hands wireless Tablet with Remote Maintenance and Rear Vision System JMT also offers: Second pedal for PLS version. Robot interface. Adaptatoin for low and high temperatures. Air conditioning in the electrical cabinet. CNC on the right side.

16 JMT sells and servicess quality metal fabrication machine tools for a wide range of sheet metal and structural steel working applications that include bending, cutting, drilling, positioning, punching, shearing and welding. JMT, a division of Jorgenson Industrial Companies, is a family owned business established in Roger Jorgenson made it his mission to build this company on the foundation of strong customer service. His children now continue this tradition since assuming leadership of the company in 2008 and establishing the JMT brand. JMT is supported by an ever expanding team of industry professionals, which include experienced application engineers, sales consultants and veteran service engineers. JMT also has a resourceful parts and tooling department to keep your machines working at optimal performance. The company has a 30,000 square foot showroom, warehouse and service center at its headquarters in Salt Lake City, Utah. JMT also has a warehouse and service center in Atlanta, Georgia. A national network of over 30 select distributors trained to sell and service JMT machines are strategically located to provide the fastest response times to our customers. JMT machines are built to our stringent set of design and quality standards in state-of-the-art manufacturing facilities. JMT partners with global manufacturers in both Europe and Taiwan who have extensive experience building machine tools for some of the leading suppliers in the industry. JMT product designs combine accuracy, speed, fl exibility, durability, reliability and advanced technology to deliver machines with the highest performance-toprice ratio in the industry. SOME OF THE FABRICATION EQUIPMENT OFFERED BY JMT The machinery showroom at JMT s corporate headquarters. For more information please visit or call toll free (855-PRESS-BRAKE). or us at JMT@JMTUSA.com. JMT press brake demonstation at the FabTech trade show.

17 HELPS YOU DO MORE WITH METAL CUT IT BEND IT ROLL IT FABRICATE IT JMTUSA.com Toll Free: (855-PRESS-BRAKE) 12/2015