CONTENTS BUILD YOUR LEGEND YOUR WORK IS YOUR REPUTATION AND SO DO WE. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO.

Transcription

1 YOUR WORK IS YOUR REPUTATION That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what it means to work hard and move the industry ahead one build at a time. AND SO DO WE. That is why our focus is a new era of fabrication. Not only do we have the largest line of ironworkers but we ve invented the POWERLINK System to revolutionize the industry. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO. We push harder and dive deeper to provide our customers the products and resources they need to rise to their next build. BECAUSE WE KNOW THAT IT IS NOT ONLY ABOUT THE BUILD... IT S ABOUT BUILDING A REPUTATION. CONTENTS IRONWORKERS ATTACHMENTS & ACCESSROIES POWERLINK HYDRAULIC TOOLS HOLE SAW NOTCHER BUILD YOUR LEGEND

2 50 West Pearce St # 2 FEATURED PRODUCTS 55 TON IRONWOR3ER Page 6 10 TON Tube/pipe bender Page TON Shop press (plc) Page 11 Hole saw notcher Page 12

3 55 TON Four workstation STANDARD (3) Punch, Flat Bar Shear & Angle Shear OPEN (1) - Customize your Ironworker with optional IRONWORKERS $17, $3, attachments 12 additional Attachments available to tailor the ironworker to your needs 17 optional Accessories available to increase precision and efficiency Available with PowerLink System to increase your capabilities with our ever expanding line of Hydraulic Tools ANSI B R(02) Compliant Guarding Integrated E-Stop, Lock-out/Tag-out ETL Certified Controls May require special inspection NOW STANDARD WITH LED LIGHTS STOCK NO. IW55-1P230-AC500 IW55-1P Ton Ironworker 1 Phase, 230 Volt $19, $15, IW55-3P Ton Ironworker 3 Phase, 208 Volt $18, $15, IW55-3P Ton Ironworker 3 Phase, 230 Volt $18, $15, TON PACKAGES Ton Ironworker 1 Phase, 230 Volt, Coper Notcher $21, $17, Ton Ironworker 3 Phase, 208 Volt, Coper Notcher $20, $17, Ton Ironworker 3 Phase, 230 Volt, Coper Notcher $20, $17, NEW 55 TON PACKAGES Ton Ironworker 1 Phase, 230 Volt, 10 Brake $21, $17, Ton Ironworker 3 Phase, 208 Volt, 10 Brake $20, $17, Ton Ironworker 3 Phase, 230 Volt, 10 Brake $20, $17, IW55-1P230-AC Ton Ironworker 1 Phase, 230 Volt with PowerLink $21, $17, IW55-3P208-AC Ton Ironworker 3 Phase, 208 Volt with PowerLink $20, $16, IW55-3P230-AC Ton Ironworker 3 Phase, 230 Volt with PowerLink $20, $16, TON PACKAGES WITH POWERLINK Ton Ironworker 1 Phase, 230 Volt, PowerLink, Coper notcher $23, $19, Ton Ironworker 3 Phase, 208 Volt, PowerLink, Coper notcher $22, $18, Ton Ironworker 3 Phase, 230 Volt, PowerLink, Coper notcher $22, $18, NEW 55 TON PACKAGES WITH POWERLINK Ton Ironworker 1 Phase, 230 Volt, PowerLink, 10 Brake $23, $19, Ton Ironworker 3 Phase, 208 Volt, PowerLink, 10 Brake $22, $18, Ton Ironworker 1 Phase, 230 Volt, PowerLink, 10 Brake $22,78927 $18, TON PACKAGES INCLUDE FACTORY INSTALLED ATTACHMENTS *IMAGE NOTE: Guarding removed for clarity to cover both of these tooling options COPER NOTCHER Versatile Attachment that removes anything from a small nibble to a large notch out of a Flat Bar or Angle Iron Integrated alignment slots on the safety guarding easily allow for 45 shearing 10 brake with 4-way die Perfect for any of your fabricating needs, great for brackets & frames Available in 7, 8, 10, & 12 lengths (varies by machine) Includes a standard punch and Four- Way Die allowing for 1/16, 1/8, 3/16, and 1/4 material to be formed to a 90 angle

4 60 TON Four workstation STANDARD (4) Punch, Flat Bar Shear, Angle Shear & Coper Notcher 9 additional Attachments available to tailor the ironworker to your needs 17 optional Accessories available to increase precision and efficiency Available with PowerLink System to 50 West Pearce St # 2 IRONWORKERS increase your capabilities with our ever expanding line of Hydraulic Tools ANSI B R(02) Compliant Guarding Integrated E-Stop, Lock-out/Tag-out ETL Certified Controls May require special inspection NOW STANDARD WITH LED LIGHTS $19, $4, STOCK NO. IW60-1P230-AC500 Punch Rating (tons) 60 Punch Max. Capacity 1 diam. in 3/4 Angle Shear Max. Capacity 3 x 3 x 1/2" 4 x 4 x 3/8" 3/8 x 14 Flat Bar Shear Max. Capacity 1/2 x 12 3/4 x 4 Coper Notcher Max. Capacity 2-1/2 x 4 x 5/16 Standard Motor 5 HP Dimensions 36-1/8 x 46-1/8 x 56-1/8 65 TON Five workstation STANDARD (4) Punch, Flat Bar Shear, Angle Shear & Coper Notcher Open Cavity (1) Customize your Ironworker with four optional Attachments Brake, Rod Shear, Multi-Shear & Pipe Notcher 12 additional Attachments available to tailor the ironworker to your needs 17 optional Accessories available to increase precision and efficiency Available with PowerLink System to IW60-1P Ton Ironworker 1 Phase, 230 Volt $21, $17, IW60-3P Ton Ironworker 3 Phase, 208 Volt $20, $17, IW60-3P Ton Ironworker 3 Phase, 230 Volt $20, $17, IW60-1P230-AC Ton Ironworker 1 Phase, 230 Volt with PowerLink $23, $19, IW60-3P208-AC Ton Ironworker 3 Phase, 208 Volt with PowerLink $22, $18, IW60-3P230-AC Ton Ironworker 3 Phase, 230 Volt with PowerLink $22, $18, increase your capabilities with our ever expanding line of Hydraulic Tools ANSI B R(02) Compliant Guarding Integrated E-Stop, Lock-out/Tag-out ETL Certified Controls $27, $5, STOCK NO. IW65-1P230-AC700 Punch Rating (tons) 65 Punch Max. Capacity 1-1/16 diam. in 3/4 Angle Shear Max. Capacity 5 x 5 x 3/8" Flat Bar Shear Max. Capacity 3/8 x 24 1/2 x 14 1 x 4 Coper Notcher Max. Capacity 2-1/2 x 5 x 3/8 Standard Motor 5 HP Dimensions 45 x 62-1/8 x 57 DESCRIPTION LIST PRICE SALE PRICE IW65-1P Ton Ironworker 1 Phase, 230 Volt $33, $27, IW65-3P Ton Ironworker 3 Phase, 208 Volt $32, $27, IW65-3P Ton Ironworker 3 Phase, 230 Volt $32, $27, IW65-1P230-AC Ton Ironworker 1 Phase, 230 Volt with PowerLink $35, $29, IW65-3P208-AC Ton Ironworker 3 Phase, 208 Volt with PowerLink $35, $28, IW65-3P230-AC Ton Ironworker 3 Phase, 230 Volt with PowerLink $35, $28,905.63

5 100 TON Four workstation STANDARD (3) Punch, Flat Bar Shear, & Angle Shear OPEN (1) Customize your Ironworker with optional Attachments 13 additional Attachments available to tailor the ironworker to your needs 17 optional Accessories available to increase precision and efficiency Available with PowerLink System to 50 West Pearce St # 2 IRONWORKERS increase your capabilities with our ever expanding line of Hydraulic Tools ANSI B R(02) Compliant Guarding Integrated E-Stop, Lock-out/Tag-out NOW STANDARD WITH LED LIGHTS $33, $7, STOCK NO. IW100-1P230-AC700 Punch Rating (tons) 100 Punch Max. Capacity 1 diam. in 1 Angle Shear Max. Capacity 6 x 6 x 1/2" Flat Bar Shear Max. Capacity 3/4 x 14 1 x 10 Opt. Coper Notcher Max. Capacity 2-1/2 x 6 x 1/2 Standard Motor 5 or 7.5 HP Dimensions 45 x 56-1/8 x 61-11/ TON Five workstation STANDARD (4) Punch, Flat Bar Shear, Angle Shear & Coper Notcher Open Cavity (1) Customize your Ironworker with four optional Attachments 12 additional Attachments available to tailor the ironworker to your needs 15 optional Accessories available to increase precision and efficiency Available with PowerLink System to IW100-1P Ton Ironworker 1 Phase, 230 Volt $38, $31, IW100-3P Ton Ironworker 3 Phase, 208 Volt $37, $31, IW100-3P Ton Ironworker 3 Phase, 230 Volt $37, $31, IW100-1P230-AC Ton Ironworker 1 Phase, 230 Volt with PowerLink $40, $33, IW100-3P208-AC Ton Ironworker 3 Phase, 208 Volt with PowerLink $39, $32, IW100-3P230-AC Ton Ironworker 3 Phase, 230 Volt with PowerLink $39, $32, TON PACKAGES WITH POWERLINK Ton Ironworker 3 Phase, 230 Volt, PowerLink, Coper Notcher $43, $35, increase your capabilities with our ever expanding line of Hydraulic Tools ANSI B R(02) Compliant Guarding Integrated E-Stop, Lock-out/Tag-out ETL Certified Controls May require special inspection $46, $9, STOCK NO. IW120-1P230-AC900 Punch Rating (tons) 120 Punch Max. Capacity 1-1/2 diam. in 1 Angle Shear Max. Capacity 6 x 6 x 1/2" Flat Bar Shear Max. Capacity 1/2 x 24 & 1 x 12 Coper Notcher Max. Capacity 3 x 6 x 1/2 Standard Motor 10 HP Dimensions 60 x 60 x 84 DESCRIPTION LIST PRICE SALE PRICE IW120-1P Ton Ironworker 1 Phase, 230 Volt $54, $44, IW120-3P Ton Ironworker 3 Phase, 208 Volt $50, $41, IW120-3P Ton Ironworker 3 Phase, 230 Volt $50, $41, IW120-1P230-AC Ton Ironworker 1 Phase, 230 Volt with PowerLink $56, $46, IW120-3P208-AC Ton Ironworker 3 Phase, 208 Volt with PowerLink $52, $43, IW120-3P230-AC Ton Ironworker 3 Phase, 230 Volt with PowerLink $52, $43,153.63

6 ELITE 110 Four workstation STANDARD (3) Punch, Flat Bar Shear, & Angle Shear OPEN (1) Customize your Ironworker with optional Attachments 13 additional Attachments available to tailor the ironworker to your needs 14 optional Accessories available to increase precision and efficiency Standard PowerLink System increases 50 West Pearce St # 2 IRONWORKERS your capabilities with our ever expanding line of Hydraulic Tools Hydraulic Hold-Down Quick Change Punch Assembly Swing-Away tripper Assembly Roller Encoder Measuring System Premium Gauging Tables LED Lighting $42, $9, STOCK NO. ELITE-1P230 Punch Rating (tons) 110 Punch Max. Capacity 1-3/8 diam. in 1 Angle Shear Max. Capacity 6 x 6 x 1/2" Flat Bar Shear Max. Capacity 3/4 x 14 1 x 12 Opt. Coper Notcher Max. Capacity 2-1/2 x 6 x 1/2 Standard Motor 7.5 HP Dimensions 57-1/4 x 42-3/8 x 66-1/16 STOCK NUMBER DESCRIPTION LIST PRICE SALE PRICE ELT110-1P Ton Ironworker 1 Phase, 230 Volt $52, $42, ELT110-3P Ton Ironworker 3 Phase, 208 Volt $51, $42, ELT110-3P Ton Ironworker 3 Phase, 230 Volt $51, $42, ELITE 110/65 FIVE workstation STANDARD (4) Punch, Flat Bar Shear, Angle Shear & Coper notcher Open Cavity (1) Customize your Ironworker with optional Attachments 12 additional Attachments available to tailor the ironworker to your needs 14 optional Accessories available to increase precision and efficiency Standard PowerLink System increases your capabilities with our ever expanding line of Hydraulic Tools Two independent power plants for true dual operation Hydraulic Hold-Down Quick Change Punch Assembly Swing-Away tripper Assembly Roller Encoder Measuring System Premium Gauging Tables LED Lighting ETL Certified Controls May require special inspection $46, $9, STOCK NO. ELT P230 Punch Rating (tons) 110/65 Punch Max. Capacity 1-3/8 diam. in 1 Angle Shear Max. Capacity 5 x 5 x 3/8" Flat Bar Shear Max. Capacity 3/8 x 24 1/2 X 14 1 x 4 Coper Notcher Max. Capacity 2-1/2 x 6 x 3/8 Standard Motor 7.5 HP Dimensions 97 X 65-1/8 ELT P /65 Ton Elite Dual Operator Ironworker 1 Phase, 230 Volt $68, $56, ELT P /65 Ton Elite Dual Operator Ironworker 3 Phase, 208 Volt $68, $56, ELT P /65 Ton Elite Dual Operator Ironworker 3 Phase, 230 Volt $68, $56,168.63

7 IRONWORKER accessories Edwards ironworkers come with standard workstations punch, flat bar & angle shear Our extensive line of Attachments & Accessories enables you to tailor your Ironworker to perfectly fit your application. All of our Ironworkers have a Workstation that can accept interchangeable Attachments to expand your capabilities and increase your Ironworkers versatility. Certain Ironworkers have Open Workstations that can have Attachments factory installed for your specific requirements CUSTOMIZE STANDARD PUNCH ASSEMBLY *Accommodates punch & dies sets from 1/8 to 1-1/16 diameter *Can be used as a secondary Punch Workstation on any Edwards Ironworker with an Open Workstation Pipe notcher housing *Make clean 90 saddle joint connections quickly and easily *Compatible with all Edwards Ironworkers *Pipe Notcher dies sold separately GAUGING TABLE KIT *3/8 thick, 12 x 16 table that add precision to your Punch Workstation *Compatible with both Standard and Oversized Pedestal Die Table *Adjustable fences and handles quickly and easily guide your material for perfect repeatable actions OVERSIZE PUNCH ASSEMBLY *Accommodates punch & dies sets in various shapes and sizes from 1 up to 1-9/16 diameter *Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation TURRET PIPE NOTCHER *Makes clean 90 saddle joint *Compatible with all Edwards Ironworkers *Pipe Notcher dies sold seperately HEAVY DUTY GAUGING TABLE KIT *1 thick, 12 x 16 table adds speed and precision to your Punch Workstation *Replaces Standard Pedestal Die Table *Adjustable fences and handles quickly and easily guide your material for perfect repeatable actions *IMAGE NOTE: Guarding removed for clarity URETHANE STRIPPER *Minimize material distortion when working with light gauge material PUNCH AND DIE STARTER SET *Includes 8 Standard round punch & die sets selected to accommodate the most commonly used bolts *Sized in 1/8 increments from 3/16 to 1-1/16 with 1/32 clearance *Made of durable tool steel for long life QUICK CHANGE PUNCH ASS Y *Increase your efficiency by saving time and money with the Quick Change Punch Assembly *Accepts both Standard and Oversize Punch and Dies Sets ACCESSORY LIGHT *Super Bright LED light with M12 connections plugs *Powerful magnetic base allows users to attach the light to any Ironworker surface and move as needed

8 Your ironworker. attachments accessories 241 punch assembly *Accommodates punch & die sets in various shapes and sizes 1 up to 4 *Punch large holes and lots in anything from heavy sheet metal to steel beams Multi shear *Designed to shear flat bar up to 1/4 x 6 and angle iron up to 2 x 2 x 1/4" *Shears solid round bar 1/4, 3/8, 1/2, 3/4 and 13/16 square bar Heavy duty gauging table kit for oversized punch assembly *1 x 12 x 16 table adds speed and precision to your Punch Workstation *Replaces installed Die Table Angle notcher *Take precise 92 notchout of mild steelup to 3 x 3 x 1/4" *Allows for easy 90 to create a steel frame ROD SHEAR *Shear solid round rod easily with the Rod Shear *Handles 1/4, 3/8, 1/2", 5/8, 3/4" and 1 solid round bar Coper notcher gauging table kit *Provides a larger 3/8 x 12-1/2 x 15-5/8 size table and two fences to better align your material Coper notcher *Versatile Attachment that removes anything from a small nibble to a large out of Flat Bar or Angle Iron *Integrated alignment tools on the safety guarding easily allow for 45 shearing Brake with 4-way die *Perfect for any of your fabricating needs, great for brackets & frames *Includes a standard punch and Four-Way Die allowing for 1/16, 1/8 and 1/4" material to be formed to a 90 angle Stripper reducing plate *Design to minimize distortion on thinner gauge materials when using 1/2 punches & dies set or smaller Auto cut - 48 *Optimize your productivity on both the Flat bar Shear and Angle Shear Workstations *The adjustable proximity sensor automatically cycles your ironworker as you feedinmaterial Fabricator s protractor *Increase user accuracy on the Punch and Flat Bar Shear Workstations *Designed to guide your workpiece and gauged at 15 increments through 180 Back gauge 48 *Speeds up production on repeatable cuts by providing an adjustable stop for the Flat Bar shear and Angle Shear Workstations *A positive stop attachment, ensures accuracy 12 & 18 fences guides *Easily adjustable to align your material, these 12 & 18 fence guides make precise, repeatableoperations simple Press brake back gauge *Easy to set up and perfect for producing repeatable bends *Bolts to the EDWARDS Ironworker or any of our Shop Presses with the Press Brake Tooling Productivity pack *Improve your Edwards Ironworker performance and output *These productivity Pack includes five Accessories designed to increase your accuracy and production speed

9 PLUG IN. POWER UP. The EXCLUSIVE EDWARDS POWERLINK System turns your Edwards Ironworker into a power source for our ever increasing line of Hydraulic Tools. *Simply PLUG IN & POWER UP our ever-increasing line of Hydraulic Tools into your EDWARDS 55 Ton ironworker to EXPAND your fabrication capabilities. *We offer Ironworker models from Tons with the factory installed PowerLink System *Our line of ELITE Ironworkers come standard with the PowerLink System * Review the specific Ironworker pages and look for the PowerLink logo to find Ironworkers with the PowerLink System installed * The EDWARDS Portable Power Unit is an additional power source with the PowerLink System 20 TON HORIZONTAL PRESS 20 TON RADIUS ROLLER 10 TON bender PORTAble POWER unit Mobile PowerLink System is a power source to operate all Edwards Hydraulic Tools Heavy-Duty castors provide easy portability to move around your shop Quick connect couplings are easy to use allowing rapid switches between Edwards Hydraulic Tools Integrated Lock-out / Tag-out system with E-Stop for added safety $5, $1, Motor Hydraulic Pump Valve Pressure STOCK NO. HAT001 5 HP 3-1/2 GPM, 1 Stage 3,000 psi Dimensions 15-1/4 x 37-1/2 x 31-1/4 Weight 400 lbs HAT001 Portable Power Unit 1 Phase, 230 Volt $6, $5, HAT002 Portable Power Unit 3 Phase, 230 Volt $6, $5,204.63

10 10 TON TUBE/PIPE BENDER Bend a wide variety of round or square tube and pipe up to 180 Horizontal or vertical operation provides the user flexibility Over 300 standard dies available to handle your bending needs Requires and Edwards Ironworker with PowerLink System or a Portable Power Unit to operate 20 TON HORIZONTAL PRESS 50 West Pearce St # 2 Designed for maximum tooling flexibility with 4 hardened in locations Ships with standard 6 Brake with 4-Way Die able to create clips, brackets, hangers and more Digital encoder provides enhanced accuracy for precise repeatability Requires an Edwards Ironworker with PowerLink System or Portable Power Unit to operate 20 TON Radius roller Hydraulic tools $3, $ $10, $2, $10, $2, Rating 10 Tons Bend Capacity 180 Pipe Capacity 2 ID (Sch. 40) Tube Capacity 2-1/2 OD.095 Square Tube Capacity 2 OD.25 Cylinder 1-3/4 Ram Stroke 14 Dimensions 0-1/2 x 36-1/2 x 42 Weight 600 lbs HAT Ton Tune/Pipe Bender $4, $3, COMBINE WITH POWERATBLE POWER UNIT HAT Ton Bender and Portable Power Unit 1 Phase, 230 Volt $9, $8, HAT Ton Bender and Portable Power Unit 3 Phase, 230 Volt $9, $7, Rating 20 Cylinder 2.25 Stroke 10 Dimensions 26 x 43 x 49 Bends a smooth, long diameter curve for a wide variety of materials including pipe, tube, square, solid round, flat bar, angle iron and channel Square Tube Solid Round Flat Bar Easy Way 2 (.120 mm) 1-3/8 3 (.375 mm) Variable speed hydraulic drive allows users to dial in the Flat Bar Hard Way 2-1/4 (.375 mm) appropriate speed for various materials Angle Iron 2 (.250 mm) Includes a 6 Universal Piece die set that accepts square tube, flat Dimensions 43 x 45 x 49 bar, angle iron and channel Requires and Edwards Ironworker with PowerLink System or Portable Power Unit to operate Weight 994 lbs HAT5000 Radius Roller $12, $10, COMBINE WITH POWERATBLE POWER UNIT HAT5010 Radius Roller and Portable Power Unit 1 Phase, 230 Volt $18, $14, HAT5020 Radius Roller and Portable Power Unit 3 Phase, 230 Volt $17, $14, Weight 1,500 lbs HAT6000 Horizontal Press $13, $10, COMBINE WITH POWERATBLE POWER UNIT HAT6010 Horizontal Press and Portable Power Unit 1 Phase, 230 Volt $18, $15, HAT6020 Horizontal Press and Portable Power Unit 3 Phase, 230 Volt $18, $15, Round Pipe 2 (Sch. 40) Round Tube 2-1/2 (.095 mm)

11 20 and 40 TON Shop press Rolling cylinder provides maximum adaptability Unique open-sided design allows material to pass through the frame Easy-to-use Hand/Jog Controls Requires and Edwards Ironworker with PowerLink or a Portable Power Unit to operate 60 and 110 TON Shop press 50 West Pearce St # 2 Larger and more powerful, the 60 & 110 Ton Shop Presses provide greater capacity and tooling options Available with Programmable Logic Control (PLC) that provides added precision and flexibility while saving the user time and money Unique open-sided design allows material to pass through the frame Requires and Edwards Ironworker with PowerLink System or a Portable Power unit to operate Hydraulic tools $3, $ STOCK NO. HAT2000 Rating (Tons) Cylinder 2 4 Stroke 6-1/4 12-1/4 Working Area 10-1/2 x x 40-1/2 Dimensions 24 x 27 x x 48 x 79 HAT Ton Shop Press $4, $3, TON COMBINE WITH POWERATBLE POWER UNIT HAT Ton Shop Press and Portable Power Unit 1 Phase, 230 Volt $9, $8, HAT Ton Shop Press and Portable Power Unit 3 Phase, 230 Volt $9, $7, HAT Ton Shop Press $8, $6, TON COMBINE WITH POWERATBLE POWER UNIT HAT Ton Shop Press and Portable Power Unit 1 Phase, 230 Volt $13, $11, HAT Ton Shop Press and Portable Power Unit 3 Phase, 230 Volt $13, $11, $10, $2, STOCK NO. HAT8000 Rating (Tons) Cylinder 4 4 Stroke 12-1/4 12-1/4 Working Area 39-1/4 x /16 x 48 Dimensions 48 x 54 x x 64 x TON SHOP PRESS HAT Ton Shop Press $13, $10, TON SHOP PRESS BUNDLE HAT Ton Shop Press and Portable Power Unit 1 Phase, 230 Volt $18, $15, HAT Ton Shop Press and Portable Power Unit 3 Phase, 230 Volt $18, $15, TON SHOP PRESS WITH PROGRAMMABLE LOGIC CONTROL HAT Ton Shop Press with PLC $18, $15, TON SHOP PRESS WITH PLC BUNDLE HAT Ton Shop Press with PLC and Portable Power Unit 1 Phase, 230 Volt $24, $20, HAT Ton Shop Press with PLC and Portable Power Unit 3 Phase, 230 Volt $24, $19, TON SHOP PRESS HAT Ton Shop Press $19, $16, TON SHOP PRESS BUNDLE HAT Ton Shop Press and Portable Power Unit 1 Phase, 230 Volt $25, $20, HAT Ton Shop Press and Portable Power Unit 3 Phase, 230 Volt $24, $20, TON SHOP PRESS WITH PROGRAMMABLE LOGIC CONTROL HAT Ton Shop Press with PLC $24, $20, TON SHOP PRESS WITH PLC BUNDLE HAT Ton Shop Press with PLC and Portable Power Unit 1 Phase, 230 Volt $30, $25, HAT Ton Shop Press with PLC and Portable Power Unit 3 Phase, 230 Volt $29, $24,658.63

12 PRESS BRAKE tooling A machined solid-steel base with heavy-duty return springs for smooth operation Features a rugged, machined punch with fourway die Offered in four lengths : 12, 18, 24 and 32 6 Piece Tooling Set including tapered and cutaway push blocks available separately $4, STOCK NO. PRB32 6 PIECE PRESS TOOLING SET $1, PRB06 Press Brake Tooling Set Six Piece $ $ PRB06-1 Press Brake Tooling Set Six Piece 60/110 Ton $ $ PRB12 Press Brake Tooling 12 Press Brake $2, $2, PRB18 Press Brake Tooling 18 Press Brake $3, $2, PRB24 Press Brake Tooling 24 Press Brake $4, $3, PRB32 Press Brake Tooling 32 Press Brake $5, $4, PRB135 Press Brake Back Gauge $1, $ PRB110 Shop Press Brake Mount Kit 110 Ton $ $ PRB60 Shop Press Brake Mount Kit 60 Ton $ $ new Hole saw notcher Multi-Positional vise provides 360 rotation for maximum notching range Vise capable of offset notching with up to 3/4 of vertical movement Compatible with most commercially available hole saws Integrated drawer is perfect for tool storage or extra hole saws Multiple scales and alignment guides make repeatable notching simple Safety guarding protects all moving parts Safety ON/OFF Switch Vertical motor orientation reduces vibration Chip guards and downward gear rack prevent chip interference Heavy-duty steel base can be bolted to any work table or our accessory Deluxe Stand Integrated base palte guide rails provide smooth travel $4, $ STOCK NO. HS1000 Angle Adjustment 3/4 HP Pipe Notching Capacity 3/8 x 2-1/2 Sch.40 Tube Notching Capacity OD 5/8 x 3 Offset Notching Range 3/4" Cutting Speed Motor 233 rpm 3/4 HP 115/230 Volt 1 Phase Amps 7 Dimensions 29 x 19 x 28-1/2 Weight 220 lbs DELUXE STAND ST2000 (sold separately) CSA/CUS CERTIFICATION: COMPLIES WITH STRICT GUIDELINES AND ELECTRICAL REQUIREMENTS HAT Ton Shop Press $13, $10, HAT Ton Shop Press with PLC and Portable Power Unit 1 Phase, 230 Volt $30, $25, HAT Ton Shop Press with PLC and Portable Power Unit 3 Phase, 230 Volt $29, $24,658.63

13 CELEBRATING MORE THAN 80 YEARS IN THE BUSINESS! Started in 1936 by Jack Dubiner in the heart of Toronto s machinery district at King and Jarvis. We are still family-owned and operated, spanning four generations! We offer a vast and varied inventory of new, used and rebuilt machinery for all your needs. Everything from woodworking machinery, metalworking machinery and tinsmithing machinery, to power tools, electric motors and accessories. A dependable source of experience and expertise, we operate out of two warehouses. With complete rebuilding facilities we service everything we sell. Expert service is available for all machinery, in your shop or ours. No matter what the demand, Ford Machinery Supply has what you need to do the job right. Visit us today at our sales and service center in Richmond Hill or browse through our extensive online catalogue. Run by Family, Treated like Family