BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
|
|
- Tyler Franklin
- 5 years ago
- Views:
Transcription
1 7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) , info@basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
2
3 WHO WE ARE Here is our humble presentation of BASANT presses which are essence of Technically Ability and Skillof our engineers. We are manufacturing all kinds of Presses i.e. Power Presses & Knuckle Joint Presses.Needless to add, the beauty of our designers are to incorporate maximum possible facilities to their user without incuring exorbitant investments. The frames of our presses are rigged in construction and high quality materials are used for their manufacturing. Due to our excellent workmanship and finish of our presses, bears pleasant outlook. We have a standard practice of seasoning our casting and stress RELIEVING our all Fabricated Structures.Undoubtedly. BASANT PRESSES will prove to be an asset to your unit.
4 INFRASTRUCTURE BASANT POWER PRESS We manufacturers of all type of power presses i.e. Pillar type (Marshal type), inclinable type (American Type) and Heavy Duty Crankless Presses upto 0 tons with pneumatic Clutch and Die Cusion. We manufacture these presses out of good cast iron as well as fabricate them depending upon the choice of our clients. Our presses have provided to be great use for cutting, blanking, piercing, Drawing and Trimming purposes etc.in our inclinable models their inclining mechanism is very simple and can be easily adjusted with a threaded screw provided on the back of the press upto approximate inclinable of the upright. BASANT Power Presses are an immaculate piece of ideal equipment utilized in a most rational manner, the principal of production with high grade of accuracy in pressing jobs like cutting, blanking, piercing, drawing trimming and embossing etc. of all type ferrous and non ferrous materials.the needs and requirement of the customer are the basis of planning at BASANT engineers are to discuss your production problems and will be pleased to develop presses for special application if the standard range do not meet your requirements BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
5 I N D E X INDEX...1 INDEX...2 INDEX...3 INDEX... OUR PRODUCTS INDEX...5 INDEX... INDEX...7 INDEX...8
6 H FRAME POWER PRESS PILLAR TYPE OR H FRAME BASANT MECHANICAL WORKS (REGD.) OF POWER PRESS PILLAR TYPE OR H FRAME CAPACITY IN TONS x0 x55 55x80 5x x0 35x0 810x810 80x80 910x910 0x0 1x PUNCH HOLE SIZE STROKE LENGTH RAM ADJUSTMENT SHUT HEIGHT STROKE PER MINUTE BORE IN TABLE POWER REQUIRED 2h.p. 3h.p. 5H.P. 5H.P. 7.5 H.P. 10H.P. 15 H.P. H.P. H.P. 0 H.P. H.P. RPM TABLE SIZE IN MM DISTANCE TABLE TO RAM PULLY SIZE BASANT MECHANICAL WORKS (REGD.) 0 1x H.P
7 C FRAME CAPACITY IN TONS TABLE SIZE IN MM DISTANCE TABLE TO RAM PUNCH HOLE SIZE STROKE LENGTH RAM ADJUSTMENT 10 3x 2 OF POWER PRESS C FRAME 0x x x x x x x SHUT HEIGHT STROKE PER MINUTE POWER PRESS C FRAME BORE IN TABLE POWER REQUIRED 2H.P H.P. 1 3H.P. 5H.P. 1 5H.P. 7.5 H.P H.P H.P. RPM PULLY SIZE BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
8 H FRAME OF POWER PRESS TWO POINT H FRAME CAPACITY IN TONS TABLE SIZE IN MM 0x x900 1x0 10x1 100x1 0x1 x1 RAM AREA 700x0 800x00 900x700 0x800 1x800 1x0 100x0 STROKE (FIX) DISTANCE TABLE TO RAM H.P. REQUIRED HP HP 0 HP HP 0 HP HP HP RPM RAM Adj. (Motorised) SHUT HEIGHT STROKE PER MINUTE BASANT MECHANICAL WORKS (REGD.) POWER PRESS TWO POINT H FRAME BASANT MECHANICAL WORKS (REGD.) 18-19
9 DIE CUSION MODEL Capacity in tons Stroke mm Air Pressure kg Optional Features» Pneumatic Clutch with Control Panel 5 5 OF DIE CUSION » Motorised Lubrication System» Penumatic Die Cushion HYDRAULIC OVERLOAD SAFETY DIE CUSHION» Shear Plate for Safety POWER PRESS SPECIAL PURPOSE» Hydraulic Overload Safety» Ram Knockout MOTORISED LUBRICATION PNEUMATIC CLUTCH BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
10 FRICTION SCREW Model: Capacity Dia. of Screw Stroke of Press Strokes per Min Table to Slide (max) Table to Slider (min) Size of Table (Front) Size of Table (Side) Distances Table to Guides Distances b/w Columns Distances b/w Guides Bore in Table Bore in Ram (shank dia) Dimension of Ram FSP- tons ½ 12 x12 FSP- tons x1 FSP- tons ½ ½ 17 x17 FSP-0 0 tons x19 FSP tons 9½ x22 FSP-0 0 tons x2 T Slot in Table 5/8 3/ 3/ 1 1 1¼ T Slot in Ram 5/8 5/8 5/8 3/ 1 1 SCREW FRICTION PRESS H.P Required R.P.M Approx. Weight in Kgs Height 7.5 h.p Kg 9-10 h.p Kg 10 - h.p Kg 12 - h.p Kg 1-0 h.p Kg 15 - h.p 90 0 Kg 17 BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
11 FORGING PRESSES MODEL : CAPACITY In Tons DIA OF SCREW (mm) STROKE OF PRESS (mm) MAX LENGTH OF JOB (mm) MAX. DIA OF JOB (mm) STROKES PER MINUTE FOUNDATION HOLES (mm) H.P. REQUIRED OF FORGING PRESSES UP-STROKE NO X 05 5 H.P NO X H.P NO X H.P NO X 8 H.P NO X 810 H.P SCREW FRICTION PRESS R.P.M HEIGHT 7'' - 8'' -'' 10'' -'' 11'' -'' 13'' -'' BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
12 BILLET SHEARING MODEL : Capacity (Mild Steel ) Capacity (Alloy Steel ) Main gear Main shaft No. of Pcs. per minute Working Height H.P. Required R.P.M OF BILLET SHEARING MACHINES RH ½ H. P RH ½ H. P RH H. P NO X 8 H.P NO X 810 H.P Approx. weight TON 8 TON 11 TON BILLET SHEARING MACHINE Height (in feet) Fly wheel dia (in inches) 5 ½ '' -'' 13'' -'' BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
13 Undercrank Shearing Machine Overcrank Shearing Machine SHEARING MACHINE OF UNDER CRANK/OVER CRANK MACHINES Model BMW U 12 Shearing Length Thickness for MS 1270 / 15 Shearing Thickness for MS 3/ Size of Blades 1270xx18 No. of Segments 2 Table of Size Height of size 8 Max. Back Gauge Gap -0 Max. Front Gauge Gap 00 No. of Stroke per min. /55 Under Crank U0 xx / U 0 xx / U xx / 1 Size : 12 mm to 000 mm Size: 12 mm to 000 mm Required HP/RPM () Capacity : 2 mm to mm Capacity : mm to 12 mm BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
14 OF UNDER CRANK/OVER CRANK MACHINES 2 Model Under Crank BMW U 12 U0 U U 0 U U 00 Shearing Length Thickness for MS 1270 / Shearing Thickness for MS /8 /8 /8 10/12 10/12 10/12 Size of Blades 1270xx23 xx23 0xx18 xx23 0xx23 3xx23 No. of Segments 2 Table of Size Height of size Max. Back Gauge Gap Max. Front Gauge Gap No. of Stroke per min. 0/35 0/35 0/35 35/ 35/ 35/ Required HP/RPM () BASANT MECHANICAL WORKS (REGD.) BASANT MECHANICAL WORKS (REGD.) 18-19
~11. H. J. WEBER & co W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS MACHINE TOOLS - FABRICATING EQUIPMENT
~11 H. J. WEBER & co. 5722 W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS 1-56 MACHINE TOOLS - FABRICATING EQUIPMENT c D PO ER PRESSES OPEN BACK INCLINABLE The SIXTY SERIES of C leveland Inclinable Open
More informationBOLT PLANT (Automatic)
BOLT PLANT (Automatic) (a) Automatic High Speed Double Stroke Cold Heading Machines (b) Automatic Bolt Head Trimming and Shank Reducing Machines (c) Automatic Thread Rolling Machines (High Speed) DOUBLE
More informationBe one step ahead of your competitor with Bias Multi Servo Press
Multi Servo Pres Allin One technology... Be one step ahead of your competitor with Bias Multi Servo Press New GenerationPressDesign withflywheelassisted ServoControl Technology Advantages of Multi Servo
More informationAnu Industries.
+91-8046027525 Anu Industries https://www.anuindustries.net/ To cater the diverse demands of our client base, we are manufacturing, supplying and exporting a wide array of Precision Components & Accessory.
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationMINSTER. P2 Series Presses PIECE-MAKER. Group Company TONS CAPACITY BULLETIN 130C
A Group Company BULLETIN 130C MINSTER P2 PIECE-MAKER 60-200 TONS CAPACITY HIGH PERFORMANCE COMBINED WITH DURABILITY RELIABILITY AND SERVICEABILITY IN STRAIGHT SIDE PRECISION PRESSES P2 PIECE-MAKER INTRO
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationMETAL STAMPING & FORMING EQUIPMENT. WFSeries. Warm / Hot Forging Presses ton
METAL STAMPING & FORMING EQUIPMENT WFSeries Warm / Hot Forging Presses 400. 600. 800. 1000. 1600 ton WF1 and WF2 Series Warm / Hot Forging Presses Stamtec WF1 and WF2 Series Warm / Hot Forging Presses,
More informationProduct Brochure For K058. Description. Features. Auckland: (09)
HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00
More information4-rolls FOMP /16
4-rolls FOMP 4000 20/16 Length mm 4000 Central roll diameter mm 460 Lateral rolls diameter mm 380 Bending thickness mm 20 Pre-bending thickness mm 16 This machine is available equipped with: - Hydraulic
More informationH. J. WEBER Be CO W. CHICAGO AVENUE CHICAGO 51, ILLINOIS. COLUMBUS
H. J. WEBER Be CO. 5722 W. CHICAGO AVENUE CHICAGO 51, ILLINOIS. COLUMBUS 1-5644 MACHINE TOOLS - FABRICATING EQUIPMENT DOUBLE CRANK POWER PRESSES INDEX POWER P STRAIGH SIDED DOUBLE CRANK SD2-60 Pa9e 3.
More informationRousselle Single Point Gap Frame (Cast Iron)
Single Point Gap Frame 15 to 110 Tons Rousselle Single Point Gap Frame (Cast Iron) Standard Features Cast Frame Air Clutch and Shoe Brake Crankshaft Motion (40 Ton and Up) Eccentric Shaft Motion (15 and
More informationSTANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching
More informationBULLETIN 507. Mechanical Forging Presses
BULLETIN 507 Mechanical Forging Presses...-. ~ " The Erie Foundry Company designs and manufactu res quality machine tools that are used around the world. Erie presses have been built to stamp, cut, blank,
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationBending, punching, shearing & plasma cutting
Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices
More informationMMC CX1 & CX2 SERIES
A Group Company MINSTER BULLETIN 184E P R E S S E S MMC CX1 & CX2 SERIES SINGLE & 2-POINT GAP FRAME PRESSES 45-315 METRIC TONS Material Forming Solutions AFFORDABLE QUALITY WITH MINSTER S INDUSTRY -LEADING
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationJiangsu Baixie Precision Forging Machinery Co.,Ltd Gillian Ge Mob: +86 (0) Tel: Fax: MSN:
Jiangsu Baixie Precision Forging Machinery Co.,Ltd Gillian Ge Mob: +86 (0) 137 7368 3540 Tel: +86 513 8883 8848 Fax: +86 513 8889 1498 MSN: kunkunh00@hotmail.com Skype:kunkunh00 E-mail: gillian.ge@baixie.com
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationBending, punching, shearing & plasma cutting
Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices
More informationMetal Stamping & Forming Equipment
COMPANY and PRODUCT OVERVIEW Metal Stamping & Forming Equipment Mechanical / Hydraulic / Servo Presses and Peripheral Equipment High performance metal stamping & forming production equipment OUR COMPANY
More informationLength. Area. Volume. OH USA, p
Conversion of Units 1 Length 1 millimeter = 0.0394 inch 1 centimeter = 0.394 inch 1 meter = 39.4 inches 1 meter = 3.2808 feet 1 kilometer = 0.62137 mile 1 inch = 25.4 millimeters 1 inch = 2.54 centimeters
More informationPPED SERIES. Hydraulic press brakes LVDGROUP.COM ACCURATE, ECONOMICAL BENDING
Hydraulic press brakes PPED SERIES ACCURATE, ECONOMICAL BENDING LVDGROUP.COM 2 # PPED SERIES PPED SERIES ACCURATE, ECONOMICAL BENDING Practical and easy to use, PPED press brakes are ideal for a wide range
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears SANDFELD A/S BIRKEGÅRDSVEJ HERNING
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationThick Turret Forming Solutions ULTRAFORM ULTRAFORM XT ULTRAFORM FX Original Style
Expanding Machine Capabilities Thick Turret Forming Solutions ULTRAFORM ULTRAFORM XT ULTRAFORM FX Original Style mate.com/ultraform Part Number 2010 Worldwide headquarters: 1295 Lund Boulevard, Anoka,
More informationPB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun
More informationINVOLUTE TOOLING CORPORATION
MANUFACTURERS OF DRIVES AND TRANSMISSIONS OFFICE: 13, JORBAGH, NEW DELHI - 110 003, INDIA, TEL: +91(011)24621453 FAX: +91(011) 24603609 WORKS: PLOT-65, SEC-27C, FARIDABAD - 121 003. INDIA, TEL: +91(0129)
More informationsince 1952 Our expertise comes from our experience...since
since 1952 Our expertise comes from our experience...since 1952... www.dirinler.com.tr Our expertise comes from our experience... since 1952... Time 1966 The First Planing Machine Production in Turkey
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Stand ard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationFUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Presses - SP
FUNDAMENTAL MANUFACTURING PROCESSES Sheet Metal Stamping Presses - SP SCENE 1. SP15A, CGS: Mechanical Presses white text, centered on background FMP BKG, motion background SCENE 2. SP16A, SME4003, 02:12:03:00-02:12:15:00
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears Sheet Metal. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationMETAL STAMPING & FORMING EQUIPMENT. Straight Side. Mechanical Presses tons
METAL STAMPING & FORMING EQUIPMENT Straight Side Mechanical Presses S2 165. 220. 330. 440. 660. 880-3300 tons S2 SERIES Straight Side Mechanical Presses Durable Reliable Versatile STRAIGHT SIDE MECHANICAL
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationpow-er. presses, BALKO TooL & MACHINE ca.»»>>machinery<<<((<,6866 NO.. WESTERN AVE. AMussad
pow-er. presses, BALKO TooL & MACHINE ca.»»>>machinery
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationSTRAIGHTSIDE PRESSES
STRAIGHTSIDE PRESSES Straightside presses are named because of the vertical columns or uprights on either side of the machine. The columns together with the bed and crown form a rigid box-like housing.
More informationDYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
More informationCNC HYDRAULIC PRESS BRAKE HPS SERIES OPTIMUM ACCURACY MACHINE CONFIGURATION TABLE CROWNING SYSTEM
HPS SERIES CNC HYDRAULIC PRESS BRAKE OPTIMUM ACCURACY Linear encoder for ram position measuring CONTROL TECHNOLOGY Two linear encoder (Y1-Y2) are mounted on two sides of machine, they measure the exact
More information127mm ~ 273mm Seamless Tube Production Plant
ES-11223 127mm ~ 273mm Seamless Tube Production Plant Information about an exclusive method of pipe making Availability of equipment at the pipe rolling area in the manufacturing sequence of their production
More informationStraight Side Crank Servo. Straight Side Eccentric Gear Servo Press
SDG2 series SDG2-400~200 SDE2 series SDE2-400~200 Straight Side Crank Servo Press Straight Side Eccentric Gear Servo Press Powerful direct drive transmission with flexible and easy-to-use operating system
More informationAUTOMATED INDUSTRIAL MACHINE,INC
The Pneumatic Toggle Press Innovators. Since 1947. AUTOMATED INDUSTRIAL MACHINE,INC TOGGLE-AIRE DIVISION 347 Farnum Pike Smithfield, RI, USA 02917 401-232-1710 www.joraco.com Installation, Operation and
More informationPRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES
PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES A Tradition of Quality and Value since 1899 DREIS & KRB MP
More informationManufacturing uptime for more than 70 years.
Manufacturing uptime for more than 70 years. We design our hydraulic presses, press brakes and shears to help drastically reduce downtime. 618-262-8666 pacific-press.com Press Brakes In addition to providing
More informationproduct catalog 800 FORM911 ( ) durmausa.com DURMA
product catalog Better Parts Better profits 800 FORM911 (367-4911) durmausa.com HD-F/l Series lasers standard equipment Siemens 840D CNC Controller Laser source (Resonator) High pressure cutting option
More informationSheet Metal Forming Presses
Sheet Metal Forming Presses October 15th, 2014 Hyunok Kim, EWI Forming Center Taylan Altan, OSU - Center for Precision Forming (CPF) 1 Outline Introduction Classification of presses Mechanical press Hydraulic
More informationACCURL MASTER GUILLOTINE SHEARS
ACCURL MASTER GUILLOTINE SHEARS MASTER MS SERIES Shaping your future ACCURL MASTER GUILLOTINE SHEARS MASTER MS SERIES Well equipped for precision cuttings (± 0.05 cutting precision) High technology Master
More informationTS / TSX. TS / TS(X) Hydraulic guillotine shears. For Impressive Performances
TS / TSX TS / TS(X) Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 AUTO BLADE GAP HYDRAULICS AND RAKE ANGLE All HACO shears are recognised for being well-built, accurate and costeffective,
More informationTRAI LER & VEHICLE ACC ESSO R I E S
2014 TRAI LER & VEHICLE ACC ESSO R I E S P R E M I E R T O W I N G P R O D U C T S M A N U F A C T U R E R DRAW-TITE GIVES YOU TOP QUALITY IN EVERY HITCH AND RECEIVER WE MAKE: Solid all-welded construction
More informationVERTEX UNIVERSAL TESTING MACHINE
OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of
More informationBULLETIN 190A ELECTRIC VEHICLE LAMINATION PRESS EV SERIES PRESSES TONS CAPACITY
BULLETIN 190A ELECTRIC VEHICLE LAMINATION PRESS EV SERIES PRESSES 250-450 TONS CAPACITY EV TABLE OF CONTENTS 3 Key Features 4 Standard Features 8 Standard Options 8 Production Management Control (PMC)
More informationDIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE GENERAL INFORMATION CAM DIES
GENERAL INFORMATION 1. ANGLE OF CAM SLIDE AND DRIVERS ANGLE OF CAM SLIDE AND DRIVERS ARE TO BE DIMENSIONED ON THE DIE DESIGN. FOR DRIVER ANGLES SEE, PAGE 4-7. AVOID THE USE OF CAM ADAPTORS. IF THE CAM
More informationMETAL STAMPING & FORMING EQUIPMENT. C-Frame. Double Crank Power Presses tons
METL STMPING & FORMING EQUIPMENT C-Frame Double Crank Power Presses G2 121. 17. 220. 275. 330 tons C-Frame Double Crank Power Presses The Stamtec G2 series two point gap frame press (aka OBG, OBS, OBI,
More informationAIRAM Press Co. LTD Industrial Court Covington, OH
AIRAM Press Co. LTD. 2065 Industrial Court Covington, OH 45318 www.airam.com TONNAGE RANGES 100 Ton Press 3 Ton Press Press Tonnage Ranges from 3 to 210 Tons Several Options available to include feeds,
More informationCITY OF ROCK ISLAND S P E C I F I C A T I O N S
CITY OF ROCK ISLAND S P E C I F I C A T I O N S It is the intent of the City of Rock Island to receive bids on fourteen (14) snow plows. The proposed plows will be used by the Public Works Departments
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationFor the Shop that Demands the Finest I
For the Shop that Demands the Finest I R VARIABLE SPEED DRIVE 3 Sizes... Pedestal Type No. 1 A -1 II Capacity No. 2 A -1Y2 II Capacity No. 3A -2 II Capacity BULLETIN 3257-C VARIABLE SPEED Drilling Machines
More informationPneumatic Auto Feed Punching and Riveting Machine
Pneumatic Auto Feed Punching and Riveting Machine A.S. Aditya Polapragada 1, K. Sri Varsha 2 1 PG student, Institute of science and technology, University College of engineering, JNTU Kakinada, A.P, INDIA
More informationReversing Switch for Ram Adjustment Motor. Depth of Throat. and Handle. Rolled Steel Welded Gears. Multiple "V" Belt Drive
Bronze Bushings in Main and Intermediate Shaft Bearings One-Piece Forged Alloy Eccentric Shafts Fully Enclosed Adjustment Gears Automatic Force Feed Oiling System SERIES D ~ Reversing Switch for Ram Adjustment
More informationMechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines
Mechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines About us The 64 years of history and know-how have turned us on an recognized presses manufacturer supported
More informationBridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
More informationSeries SSG - Compressing & stretching device for the Use in the workshop and construction zone
Compressing and stretching devices Series SSG - Compressing & stretching device for the Use in the workshop and construction zone To manufacture wheel arches, window frames, rain profiles or door edges
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationAccessories Catalogue
Accessories Catalogue GEKA ACCESSORIES Since 1919, GEKA Group has been manufacturing Ironworkers for angle work, flats and profiles - for black iron, metal workshops, metal constructions, telecommunication
More informationShearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
More informationAdding performance to the industry. Widest Range of Machines installed with proven performance AN ISO 9001:2000 CERTIFIED COMPANY.
Adding performance to the industry We at Energy Mission believe to deliver high quality products at competitive price supported by best service support. To achieve this mission, we have developed inhouse
More informationBottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8
Cover Page Bottle Jacks Bottle Jacks - Steel lifting saddle engineered to hold load securely - Extension screw adjusts to accommodate desired work height - Built-in bypass system protects against ram over-travel
More informationFactors to consider when selecting a diverter valve
Factors to consider when selecting a diverter valve Selecting a diverter valve for your pneumatic conveying system can be a tough job, especially when you consider how many diverter valves are on the market.
More informationHammers & Dollies Panel Shaping Trim Windscreen PANEL & TRIM
Hammers & Dollies Panel Shaping Trim Windscreen PANEL & TRIM 295 PANEL & TRIM HAMMERS & DOLLIES Hammers Panel Beating Premium trade quality range made from hickory timber handles (octagonal shape) and
More informationBSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears
Cutting Circular shears / Sheet metal shears New KS 1 - Manual circular shear to cut arcs of a circle in steel up to 1.0 mm KS 2 - Motor-driven circular shear to cut arcs of a circle in steel up to 2.0
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationPower, Speed and Flexibility
Power, Speed and Flexibility The New KIERMAR Advanced High Tonnage Press New thinking. New solutions. We develop the new press solutions. Martin Hansen Managing Director, KIERMAR Technology. Behind him,
More informationLifting Magnets. Features. Lifting Magnet Construction
Lifting Magnet Construction The Lifting Magnet has strong magnetic path produced by Nd-Fe-B magnetic materials. The On and Off magnetic path is controlled by turning the handle manually. It uses magnet
More informationSN2 series SN2-121~330 TONS DOUBLE CRANK PRECISION PRESSES
0 0 SN2-121~330 TONS DOUBLE CRANK PRECISION PRESSES Quality / Productivity / Safety Features High torque, low noise wet clutch/brake unit. Rigid, fabricated steel frame with minimal deflection. High accuracy
More informationMODERN TECHNOLOGY IN PUNCHING AND SHEARING
MODERN TECHNOLOGY IN PUNCHING AND SHEARING SOLUTION The GEKA HYDRACROP range of hydraulic steelworkers have been designed by highly experienced engineers with the support of powerful CAD equipment, culminating
More informationErgonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
More informationParts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7
Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page
More informationSUPERIOR DESIGN FOR SHEARING ACCURACY
SHEAR POWER SUPERIOR DESIGN FOR SHEARING ACCURACY Unique Hydra-Mechanical Rocker Arm Drive System This design, unique to the Accurshear, delivers the strength, power and rigidity of the guillotine system
More informationHYDRAULIC PIPE BENDER - HAND OPERATED - TRIPOD MODEL PIPE BENDER - MECHANICAL MOTORISED PIPE BENDER - SPECIAL PURPOSE- MULTI FUNCTION
HYDRAULIC PIPE BENDER - HAND OPERATED - TRIPOD MODEL VXHPB - T 9 VXHPB - T 9 VXHPB - T 21 9 Ton. 21 Ton. MAXIMUM 2 mm. 370 mm. CRIMP RANGE (mm.) Ø 21.3 - Ø 60 mm. Ø 21.3 - Ø 8 mm. BENDING FORMERS (inch)
More informationPNEUMATIC PRESSES. pneumatic presses DESCRIPTION FEATURES AND OPTIONS
3 DESCRIPTION Air-Mite has been manufacturing since 1952. We are continuously improving the durable, time-tested design of our presses PRESS SELECTION that they exert. From the smallest DPS4 model, which
More informationFabrication. Fabrication HGS SERIES
HGS SERIES Chester Hydraulic Guillotines Chester supply a wide range of equipment from small Slip Rolls and Folders to Heavy Duty Guillotines. All equipment is checked and quality assured by qualified
More informationChicago Pneumatic Construction Tools
Chicago Pneumatic Construction Tools Chipping Hammers, Clay Diggers, Demolition Picks and Busters Built to last Hammers, Picks and Clay Diggers Key features CP 0012 handle based on the famous CP 0009 design
More informationTS / TSX. TS / TS(X) Hydraulic guillotine shears Sheet Metal. For Impressive Performances
TS / TSX TS / TS(X) Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 All HACO shears are recognised for being well-built, accurate and costeffective, meeting the demand
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationCombination Clutch/Brake
WE9289 P1100WC PCB Catalog v4_new_p-1100-wc.qxd 1/31/12 10:51 AM Page 10 For metalforming equipment Fast, smooth cycling Cool running with higher torque Compact disc design Simple Installation Multiple
More informationCONTENT. 1. Syllabus 2. Introduction 3. Shaft 4. Coupling. Rigid coupling. Flange coupling. Sleeve (or) muff coupling Split muff coupling
UNIT II 1. Syllabus 2. Introduction 3. Shaft 4. Coupling Rigid coupling CONTENT Flange coupling Protected flange coupling Unprotected flange coupling Marine type flange coupling Sleeve (or) muff coupling
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationIRONWORKERS & PUNCHING MACHINES
HYDRAULIC IRONWORKERS & PUNCHING MACHINES Multi-Function Excellent Quality Economical Investment ISO 9001 INTRODUCTION With a highly dedicated team, Sunrise Fluid Power Inc. has been specializing in the
More informationSTAMPING PRESSES, ALLOY & STEEL WHEEL MANUFACTURING LINES FOR SALE METALSA AUSTRALIA & ROH AUTOMOTIVE
In conjunction with STAMPING, ALLOY & STEEL WHEEL MANUFACTURING LINES FOR SALE METALSA AUSTRALIA & ROH AUTOMOTIVE PRIVATE TREATY SALE Transfer Press Lines, Tandem Press Lines, Hydraulic Presses, C - Frame
More informationSCHMIDT Toggle Presses
SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers Comparator stands Small measuring instruments Benennung Artikel-Nr. Run-out testers Height of centres 50 mm height of centres 75 mm Benzing run-out testers consist of a base plate, a pair
More informationSMALL CONSTRUCTION EQUIPMENTS
SMALL CONSTRUCTION EQUIPMENTS SR NO CONCRETE MIXERS 1 [CM-1] FULL BAG CONCRETE MIXER WITH MECHANICAL HOPPER MOUNTED ON [500 19] TYRES CONCRETE MIX 200 LTS A] 6 HP AIR COOLED DIESEL B] 3PH 5 HP ELECTRIC
More information+91-8046032093 Y K Enterprises http://www.ykenterprises.in/ We're Authorized Dealers for KSB including Gate Valves, Globe Valves, Check Valves and Ball Valves, As well as for Pennant including Thermodynamic
More informationLIFTING MAGNET OPERATING, MAINTENANCE, & PARTS MANUAL
LIFTING MAGNET OPERATING, MAINTENANCE, & PARTS MANUAL ACI Hoist & Crane 757 Southeast 17 th Street Fort Lauderdale, Fl 33116 Phone: 954-367-7116 Fax: 954-272-0334 www.acihoist.com Table of Contents SECTION
More informationDemolition of refineries Cutting of Metal and steel structures Cutting steel girders/beams Cutting reinforcements
Shears ISS Series Application areas F II III Demolition & renovation Recycling Light Demolition Demolition of non-reinforced concrete structures Composite steel & concrete structure demolition Demolition
More informationAUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION 347 Farnum Pike Smithfield, RI, USA
The Pneumatic Toggle Press Innovators. Since 1947. AUTOMATED INDUSTRIAL MACHINE, INC TOGGLE-AIRE DIVISION 347 Farnum Pike Smithfield, RI, USA 02917 401-232-1710 www.joraco.com Installation, Operation and
More information