PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES
|
|
- Silas Daniels
- 6 years ago
- Views:
Transcription
1 PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES A Tradition of Quality and Value since 1899 DREIS & KRB MP MANUFACTURING CO.
2 PRESS BRAKES for sheet metal and plate work Capacity 30/ 45 Tons MODELS 131 and 135 Capacities 11 and 15 Tons MODELS 265 and 285 Capacity 25 Tons SERIES A and B Capacities 30/45 and 36/55 Tons PRINCIPAL SPECIFICATIONS Model131 Capacity Tons 11 *Bending Capacity 48" x 18 Ga. Length of Bed and Ram 48" Dista nee between Housings 31" Strokes per Minute 25 to 60 Stroke 2" Standard Die Space 7~" Die Space Adjustment 3" Drive Motor % Hp. Approx. Shipping Weight, Lbs. 2,000 Model " x 16 Ga. 48" 31" 25 to 60 2" 7~" 3" % Hp. 2,100 Model265 Model " x 16 Ga. 96" x 18 Ga. 72" 96" 62" 62" 20 to to 50 2" 2" 9" 9" 3" 3" Ph Hp. 1 Yz Hp. 4,500 4,750.~ =- - Modei56A Modei68B SERIESC 4 Std. Sizes 30/ 45 36/ 55 50/ 75 48"x~"to 72" x 12 Ga. 96" x 12 Ga. 144" x 14 Ga. 72" 96" 72" to 120" 62" 78" 54" to 102" " 3" 3" 9" 12" 12" 3" 3" 4" 1 Yz Hp. 3 Hp. 5 Hp. 6,300 9,200 8,600 to 14,500 *Bending capacity is based on 90 air bend on mild steel over a V-die opening 8 limes metal thickness and with an inside radius approximately equal to the metal thickness. Induction Hardened PRESS BRAKE DIES for Any Size or Make of Press Brake STANDARD DIES Standard CHICAGO induction hardened press brake dies offer economical tooling for a surprisingly large variety of bending operations. Quick delivery saves time in tooling. COMPLETE DIE SERVICE Dreis & Krump offers a complete service in designing and building special induction hardened dies for multiple bending and forming operations, punching and notching setups on any make of press brake. For recommendation and quotation, send drawings or samples of parts to be produced; also make of press brake, die space; and length of stroke.
3 MECHANICAL and HYDRAULIC the correct size for any range of work MODEL 5510D Capaclty 200/ 300 Tons MODEL 6BC Capacl1y 60/ 90 Tons SERIES C and L Capacities 50/75 and 60/90 Tons SERIES L 4 Std. Slus SERIES D 40 Std. Sizes HYDRAULIC 60/ 90 90/ 135 to 500/ to " x Y4" to 60" x 5 /is" to 144" X 12 Ga. 216" X \12'' 72" to 144" 72" to 240" Other 54" to 126" 54" to 198" Specifications to 25 of Hydraulic 3" 3" to 5" Press 12" 12" to 14" Brakes 4" 5" to 6" on 5 Hp. 7\lz to 40 Hp. Request 10,000 to 15,500 15,000 to 138,000 SERIES D Capacities 90/135 to 500/750 Tons Capacity 300 Tons CHICAGO HYDRAULIC PRESS BRAKES Capacities 100 to 2000 Tons
4 STRAIGHT-SIDE-TYPE PRESS BRAKES for blanking, shallow draw, forming, notching, punching ECONOMICAL, LARGE DIE AREA-Capacities to 500 Tons CHICAGO straight-side-type press brakes offer a cost and operating economy in providing the unusually large die area with only the limited ton-capacity needed for many operations on light-gauge sheet metal parts. Thes~ press brakes are custom built to individual requirements for die area up to approximately 54" x 200" and 500-ton capacity. Built-in operating controls offer a choice of continuous automatic production from coiled stock or single-stroke operation with protection for operators when more than one is employed, as with progressive dies. In submitting request for recommendations, specify capacity, stroke, die space, and bed area required, or submit drawings of the work to be done. COMPLETE TOOLING for production Dreis & Krump offers a complete service in designing and building the tools for any combination of the multiple operations possible on these press brakes. Special consideration is given to individual production requirements and the most economical and effective use of press brake size and capacity. For recommendations and quotations, it is necessary to give complete details of the work to be done on a specific press brake as well as production quantities. STRAIGHT-51 DE-TYPE Model CHICAGO Press Brake, with a die area of 54 x 108 inches, and a capacity of 115 tons. STRAIGHT-SIDE GAP-TYPE Model 6120-SS CHICAGO Press Brake with a die area of 36 x 144 inches, and a capacity of 200 tons.
5 POWER ' BENDING BRAKES f for bending sheet metal and ste_el plate Single Wing-Double Wing FOLDER BRAKES for folding and tangeqt bending Folder Brakes are custom built in single-wing and double-wing models. They are built in many styles to meet the individual requirements for length of bend, distance between bends, sharp or radius corners with or without flanges or offsets. Special designs are engineered for unusual needs. These machines may be had as a single purpose machine or may incorporate flexibility to handle a variety of sizes or products. Pneumatic or hydraulic operation is offered to suit conditions. CHICAGO A typical CHICAGO double-wing folder brake with open throat and moving head. The low head is particularly suited to forming small, closed wrapa~ounds. Open throat permits easy removal of the formed piece. Hydraulic SPEEDIBENDER for production bending of duct sections and long, light-gauge work Hydraulically-operated CHICAGO Speedibenders are available in 4 models with foot-switch control for fast, bottomingtype forming that assures accurate bends the full length of the work. Adjustable air bending stops also available, as well as instant-positioning 3- and 4-opening female dies, removable punches for ram, adjustable front gauges, disappearing pin gauges for bending pre-notched sheet, and spring-loaded gauge pins for making %'-inch edge for Pittsburgh lock. POWER LEAF BENDING BRAKES and UNIVERSAL BOX AND PAN BRAKES for duplicate bending without dies CHICAGO Power Leaf Bending Brakes are available in 42 standard sizes with maximum bending lengths on mild steel of 4 feet of 10 gauge to 16 feet of 72 inch. CHICAGO Power Universal Box and Pan Brakes are available in 12 standard sizes with maximum bending lengths on mild steel to 10 feet of 10 gauge.
6 HAND OPERATED BENDING BRAKES f o r bending sheet m eta l... STA NDARD HAN D BRAKES CHICAGO Standard Hand Brakes are available in 23 sizes with maximum bending lengths on mild steel of 3 feet of 12 gauge to 10 feet of 14 gauge or 12 feet of 18 gauge. UNIVERSAL BOX AND PAN BRAKES CHICAGO Universal Box and Pan Brakes are available in 17 standard sizes with bending lengths on mild steel of 3 feet of 12 gauge to 10 feet of 14 gauge. BENCH MODEL UNIVERSAL BOX AND PAN BRAKES The bench model of the CHICAGO Universal Box and Pan Brake is available in three standard sizes with bending lengths of 24", 30", 36" of 16 gauge mild steel. Form No. GC-63 Printed in U.S.A.
JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More information40 Ton and 50 Ton Ironworker
40 Ton and 50 Ton Ironworker 40 TON THE SHOPMATE 4 Workstations Maximum capacity: 1" diameter in 1/2" plate 40 Ton and 50 Ton Ironworker Throat depth: 7" Stroke: 1" Work Height: 38-1/2" Open Station Throat
More informationReversing Switch for Ram Adjustment Motor. Depth of Throat. and Handle. Rolled Steel Welded Gears. Multiple "V" Belt Drive
Bronze Bushings in Main and Intermediate Shaft Bearings One-Piece Forged Alloy Eccentric Shafts Fully Enclosed Adjustment Gears Automatic Force Feed Oiling System SERIES D ~ Reversing Switch for Ram Adjustment
More informationSTANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching
More information7440 w. 100th Pl. Bridgeview, IL Phone (708) FAX # (708) th Edition
7440 w. 100th Pl. Bridgeview, IL. 60455 Phone (708) 430-0795 FAX # (708) 430-0978 WWW.RITEWAYBRAKEDIES.COM 4th Edition Air Craft Tooling...33, 34 30 Punches & Dies...6 90 Punches & Dies...3, 4, 5 Adapters...24,
More informationBending table FIGURE 01
TOOLING CATALOGUE Bending table FIGURE 01 V = die-opening B = minimum of the leg for a bending angle α = 90 Ri = internal radius of the bend F = required bending force in tonnage per meter bending S =
More informationHYDRAULIC. IRONWORKERS SW-Series
HYDRAULIC IRONWORKERS SW-Series IRONWORKERS Every Machine Has 5-Station Versatility Built In Station Baileigh Industrial offers the highest quality Ironworkers on the market today. Our 50 ton, 62 ton,
More informationSHEARING & PRESS BRAKE - KAWA HYDRAULIC PRESS BRAKE
SHEARING & PRESS AKE - KAWA HYDRAULIC PRESS AKE Frame : The frame is of heavy duty design and hot rolled welded steer plate construction. The shearing table is Integral wi e basic machine frame to ensure
More information~11. H. J. WEBER & co W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS MACHINE TOOLS - FABRICATING EQUIPMENT
~11 H. J. WEBER & co. 5722 W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS 1-56 MACHINE TOOLS - FABRICATING EQUIPMENT c D PO ER PRESSES OPEN BACK INCLINABLE The SIXTY SERIES of C leveland Inclinable Open
More informationpow-er. presses, BALKO TooL & MACHINE ca.»»>>machinery<<<((<,6866 NO.. WESTERN AVE. AMussad
pow-er. presses, BALKO TooL & MACHINE ca.»»>>machinery
More information4-rolls FOMP /16
4-rolls FOMP 4000 20/16 Length mm 4000 Central roll diameter mm 460 Lateral rolls diameter mm 380 Bending thickness mm 20 Pre-bending thickness mm 16 This machine is available equipped with: - Hydraulic
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationQUALITY FROM THE CUTTING EDGE OF FABRICATION
BENDING EFFECTIVE July 2005 QUALITY FROM THE CUTTING EDGE OF FABRICATION TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 88º & 90º PUNCHES - - - -
More informationPBT. CleanBend RESPECT SUPPORT INSPIRE CLEANBEND FORMING TECHNOLOGY. European Precision Style Wila Trumpf Style American Precision Style
PBT PN CleanBend RESPECT SUPPORT INSPIRE CLEANBEND FORMING TECHNOLOGY European Precision Style Wila Trumpf Style American Precision Style 2 TABLE OF CONTENTS Mate CleanBend Forming Technology Helpful CleanBend
More informationProduct Brochure For K058. Description. Features. Auckland: (09)
HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00
More informationCOMPANY HISTORY Di-Acro Metal Fabrication Equipment
COMPANY HISTORY Di-Acro Metal Fabrication Equipment For more than sixty years, Di-Acro Inc. has served the metalworking industry producing metal fabricating equipment. We ve maintained the same traditional
More informationWHY CHOOSE ACCURPRESS TOOLING?
TOOLING SYSTEMS WHY CHOOSE ACCURPRESS TOOLING? Whether you are looking for general purpose tooling or special application configurations, Accurpress is committed to the highest level of quality and customer
More informationTHE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design
More informationPB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun
More informationPressing forces - Table Air bending/bottoming
Press Brakes GP Tool Systems Bending tools in combination with a high-precision metal forming machine are the backbone of sheet metal bending part production. Weinbrenner tools deliver machining quality
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationManufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment
Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Where superior duct work begins. The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all
More informationPh: 1-(800) or (204) Fax: (204) Website:
JUST ARRIVED! Sahinler Press Model AP 1520-150 165 Ton Pressing Force 12 Stroke 60 Working Width 3/8 Bending Capacity (Punch and 4 Way Die Included) 24 x 60 Bed Area 15 HP Motor 220/3/60 New sells for
More informationBridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
More informationA PROVEN ...WITH HUMBLE BEGINNINGS ...AND A VERY BRIGHT FUTURE U.S. COMPANY. First C-Frame. First Four Column. First Shear
PRESS BRAKES A PROVEN U.S. COMPANY...WITH HUMBLE BEGINNINGS First C-Frame First Shear First Four Column...AND A VERY BRIGHT FUTURE POWERFUL, PRECISION MACHINES MADE IN THE USA / 02 MODEL AB PRESS BRAKES
More informationSHEET METAL WORKING MACHINERY
SHEET METAL WORKING MACHINERY Quality Machinery Affordable Prices CONTENTS ROLL FORMERS...2-4 SHEARING SLITTING NOTCHING... 5,6 CNC PLASMA... 7 BRAKES and BENDERS... 8,9 BEADING CRIMPING... 10 ROLLING,
More informationPRCB - High Performance Configurable solution for high-performance and top quality work PRCB HIGH PERFORMANCE
PRCB - High Performance Configurable solution for high-performance and top quality work PRCB HIGH PERFORMANCE / PRCB PRCB is a high-performance press brake designed for all types of production involving
More informationBASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) 91-97802-00007, 9315-11111 info@basantgroup.com www.basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS
More informationJANUARY - JUNE TON IRON WORKER $18,899 $13,999 $7,899 $1,049 $3,099 $170 $389 FOR MORE INFORMATION
JANUARY - JUNE 2018 65 TON IRON WORKER $18,899 SEE PAGE 66 GEARED HEAD BENCH LATHES CYCLONE DUST COLLECTOR 110 TON SHOP PRESS WITH PLC $7,899 $1,049 $13,999 WITH SEE PAGE 22 TRADESMAN VISE TRADEMARKED
More informationIRONWORKERS & PUNCHING MACHINES
HYDRAULIC IRONWORKERS & PUNCHING MACHINES Multi-Function Excellent Quality Economical Investment ISO 9001 INTRODUCTION With a highly dedicated team, Sunrise Fluid Power Inc. has been specializing in the
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning
More informationMODERN TECHNOLOGY IN PUNCHING AND SHEARING
MODERN TECHNOLOGY IN PUNCHING AND SHEARING SOLUTION The GEKA HYDRACROP range of hydraulic steelworkers have been designed by highly experienced engineers with the support of powerful CAD equipment, culminating
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationFabrication Series Hydraulic Press Brake 14' x 242 Tons
Box 20, Grp. 200, RR2, 390 Eagle Drive, Winnipeg, MB R3C 2E6 Canada Toll Free 800-665-8089 Ph: 204-779-7791 Fax: 204-779-7796 Email: sales@empire-machinery.com December 18, 2017 Technical Specifications:
More informationPRESSES INTRODUCTION THE SIMPLEX PRESS THE SIMPLEX PLUS. Moveable work head allows movement across the entire length of the top cross bar.
INTRODUCTION PRESSES THE SIMPLEX PRESS Double pinned & welded construction for strength & safety. Friction brake winch for easy adjustment of work bed. Will not drop if handle is released. Moveable work
More informationChicago 25 Ton Press Brake Owners Manual
Chicago 25 Ton Press Brake Owners Manual Fab shop s massive new 1500-ton press brake gives. OH and field-based service and sales staff, CINCINNATI is structured to Machine Manuals, Press Brake Accurpress
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationDI-ACRO #2 HAND PUNCH PRESS INSTRUCTION MANUAL
DI-ACRO #2 HAND PUNCH PRESS INSTRUCTION MANUAL REV. E 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. SET UP PROCEDURE & MOUNTING PUNCHES & DIES PG. 3-4 C. MAINTENANCE PG. 4 D. TECHNICAL DATA PG.
More informationNon-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
More informationFabrication. Fabrication HGS SERIES
HGS SERIES Chester Hydraulic Guillotines Chester supply a wide range of equipment from small Slip Rolls and Folders to Heavy Duty Guillotines. All equipment is checked and quality assured by qualified
More informationMADE IN THE USA SINCE product catalog
product catalog YOUR IS YOUR REPUTATION. That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what
More informationMINSTER. P2 Series Presses PIECE-MAKER. Group Company TONS CAPACITY BULLETIN 130C
A Group Company BULLETIN 130C MINSTER P2 PIECE-MAKER 60-200 TONS CAPACITY HIGH PERFORMANCE COMBINED WITH DURABILITY RELIABILITY AND SERVICEABILITY IN STRAIGHT SIDE PRECISION PRESSES P2 PIECE-MAKER INTRO
More informationFUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Presses - SP
FUNDAMENTAL MANUFACTURING PROCESSES Sheet Metal Stamping Presses - SP SCENE 1. SP15A, CGS: Mechanical Presses white text, centered on background FMP BKG, motion background SCENE 2. SP16A, SME4003, 02:12:03:00-02:12:15:00
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationSpartanics M500 PRESS SPECIFICATIONS. Strokes per Minute
M500 PRESS SPECIFICATIONS 5 Ton 3 10 TonCE 15 TonCE 20 TonCE 30 TonCE 30 Ton DTCE 40 TonCE 50 TonCE 50 Ton DTCE 75 TonCE Normally Stocked In Inventory 1 No No No Yes Yes Yes No Yes No No Strokes per Minute
More informationTHE WARREN WORK TABLE
THE WARREN WORK TABLE Size - 24" x 30" x 36" Height is adjustable 30" to 36" Weight capacity - 800 lbs. Top - ⁵ ₁₆" HR Steel Frame - 2" x 2" x ¹ ₄" angle Shelf - 11 gauge HR Steel Wheels - Casters With
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationAIRAM Press Co. LTD Industrial Court Covington, OH
AIRAM Press Co. LTD. 2065 Industrial Court Covington, OH 45318 www.airam.com TONNAGE RANGES 100 Ton Press 3 Ton Press Press Tonnage Ranges from 3 to 210 Tons Several Options available to include feeds,
More informationServo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationSection 13. Shop Equipment
Section 13 Shop Equipment INDEX Shop Equipment Tennsmith 13-2 Flagler 13-3 Plasma Pro Tables -PPI 13-4 Berry Industries 13-5 Duro Dyne 13-6 Tin Knocker 13-7 Roper Whitney / Pexto 13-8 13-1 TENNSMITH TENNSMITH
More informationAD-S SERIES PRESS BRAKES DURMA
AD-S SERIES PRESS BRAKES BETTER PARTS BETTER PROFITS Durma press brakes guarantee precision, low maintenance and operating costs, as well as long-term reliability. These features along with large investments
More informationSTRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
More information:46 Pagina 69 Bending
Bending Bending Lever Benders Lever Benders 300 Series Plumbing Benders Designed to bend soft copper tubing to a maximum of 180. Offset cushion grip handles eliminate knuckle cracking. Cat. Model Capacity
More informationFOR GLOBAL SALES AND SERVICE, PLEASE CONTACT US
FOR GLOBAL SALES AND SERVICE, PLEASE CONTACT US 3901 W DALLAS ST. BROKEN ARROW, OKLAHOMA 74012 U.S.A. E-mail: sales@sigmafab.com Phone: +1-918-230-6157 Skype: globalman122 Co. Me. srl Under the trade name
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
More informationSheet Metal Machinery
Sheet Metal Machinery Proudly made in the USA An American Tradition A F a m i l y T r a d i t i o n Ray Smith, Sr., and sons, Ray Smith, Jr., and W. Douglas Smith, founded the business, first known as
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationACCESS DOORS GENERAL PRODUCT OVERVIEW
GENERAL PRODUCT OVERVEW Fire dampers need inspecting and testing, coils need cleaning and controls need adjusting. Nailor ndustries offers a range of duct and plenum access doors that have been designed
More informationUKB-System L. Type LVD
UKB-Sstem L Tpe LVD..... Explanation punches/top-tools and dies. 2 3 Punches/top-tools Punches/top-tools. 1 26 Punch/top-tool. 1 Holder for changeable 86 /84 /28 blades. Holder for radius-tools R 7,0-0,0.
More informationModel PcU w/ guard (included with all Pendant Control Hoists) Std. Load. 8 ft. 1 9 ft. 17" 88.6 ft./min. 8 ft. 1 9 ft. 17" 41.3 ft./min.
Mini Air Hoists Efficient, High Speed Material Handling NPK air hoists are engineered to provide high lifting speeds and accurate control. Lightweight, compact design for use in a stationary position,
More informationADJUSTABLE AIR PRESS
ADJUSTABLE AIR PRESS MODELS 12-A, 28-A, 50-A INSTALLATION, OPERATING, and MAINTENANCE INSTRUCTIONS Black & Webster Assembly Equipment Division 545 Hupp Ave. P.O. Box 831 Jackson, Michigan 49204 Phone:
More informationMADA SPH-30C S H-60C
MADA SPH30C S H60C Punch point penetration V=56xt THE AMADA SPH SERES HYDRAULC BRAKE PRESSES COMBNE MULT APPLCATON VERSATLTY WTH REMARKABLE PRODUCTVTY AND ECONOMY When more shop capacity is needed and
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationCONTENTS BUILD YOUR LEGEND YOUR WORK IS YOUR REPUTATION AND SO DO WE. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO.
YOUR WORK IS YOUR REPUTATION That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what it means to
More informationQuality from the Cutting Edge of Fabrication
Quality from the Cutting Edge of Fabrication TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - -
More informationApplications. Innovative Solutions For Wire and Cable Management
Carlon P&C Flex Corrugated Flexible Conduit Carlon P&C Flex Nonmetallic Corrugated Conduit makes power and communication installations faster and easier by providing maximum installation flexibility. The
More informationVI. Quality SOP Lists
In this section are lists of Quality standard operating procedures (SOP) for each of your work stations in your Intercept IG production line. These procedures are quality items which should be checked
More informationManufacturing uptime for more than 70 years.
Manufacturing uptime for more than 70 years. We design our hydraulic presses, press brakes and shears to help drastically reduce downtime. 618-262-8666 pacific-press.com Press Brakes In addition to providing
More informationRousselle Single Point Gap Frame (Cast Iron)
Single Point Gap Frame 15 to 110 Tons Rousselle Single Point Gap Frame (Cast Iron) Standard Features Cast Frame Air Clutch and Shoe Brake Crankshaft Motion (40 Ton and Up) Eccentric Shaft Motion (15 and
More informationTOGGLE DRIVEN BEAM PUNCHES AND PRESSES
TOGGLE DRIVEN BEAM PUNCHES AND PRESSES FOR PUNCHING EXTRA LARGE STRUCTURAL SHAPES AND MANUFACTURED PARTS MORE DIE SPACE 2 DEEPER THROAT LONGER STROKE 4 GREATER CAPACITY HIGHER PRESSURE G LESS POWER CONSUMED
More informationCOLD AIR INTAKE INSTALLATION INSTRUCTIONS. # D Fits: E92 328i & xdrive PARTS LIST
COLD AIR INTAKE INSTALLATION INSTRUCTIONS # D760-9001 Fits: 2007-13 E92 328i & xdrive PARTS LIST (1) Intake Snorkel (1) Flex Tube (1) Brake Scoop Assy (1) Front Grill (1) Filter (1) Hardware Kit (2) Edge
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears Sheet Metal. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationWILSON AMERICAN PRECISION
WILSON AMERICAN PRECISION PRESS BRAKE SOLUTIONS GUIDE Standards, Specials and Accessories PUNC 6 6 American Style Tooling 8 Acute Block Punch - 3.75 8 Acute Gooseneck Punch - 5.75 9 Arrow Punch - 3.75
More informationF G. Punch Dimensions
SPH Series - Single Acting Punch Capacity... 35 tons Maximum Thickness....5 in. Maximum Pressure... 10,000 psi Industrial grade, single acting, spring return design. Punches holes in material up to.5 thick
More informationTRUMPF Power fasteners: Fasten. faster and cheaper. Fastening
TRUMPF Power fasteners: Fasten faster and cheaper. 58 Particular strengths: Whether in HVAC or in container and equipment construction, joining is probably the simplest and most cost-effective way to connect
More informationPPED SERIES. Hydraulic press brakes LVDGROUP.COM ACCURATE, ECONOMICAL BENDING
Hydraulic press brakes PPED SERIES ACCURATE, ECONOMICAL BENDING LVDGROUP.COM 2 # PPED SERIES PPED SERIES ACCURATE, ECONOMICAL BENDING Practical and easy to use, PPED press brakes are ideal for a wide range
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationEASY-FORM SERIES. Hydraulic press brakes LVDGROUP.COM THE ULTIMATE BENDING MACHINE
Hydraulic press brakes EASY-FORM SERIES THE ULTIMATE BENDING MACHINE LVDGROUP.COM 2 # EASY-FORM SERIES EASY-FORM SERIES THE ULTIMATE BENDING MACHINE The Easy-Form /PPEB Series are smart, highly accurate
More informationPower Operated Benders Hand Operated Benders CONTENTS
Power Operated Benders Hand Operated Benders CONTENTS Power Operated Benders... 2 No.6 Power Bender Set-up... 3 No.8 Power Bender Set-up... 4 Hand Operated Benders... 5 Bender Specs, Accessories & Tooling...
More informationDi-Acro 12 & 24 Slip Rollers
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro & Slip Rollers Di-Acro, Incorporated PO Box 9 Canton, Ohio Progress Street N.E. Canton, Ohio --9 -- (fax) Revised / Sale or distribution of manuals is strictly
More informationAccepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
More information:45 Pagina 5 Clamping
Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationMore bending freedom.
TruBend: More bending freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology The best bending solutions. Contents The best bending solutions. 2 Why TruBend is better. 4
More informationw w w. m a r v e l s a w s. c o m
Quality Machines by Vertical Band Saws Series 8 Mark III Miter cuts up to 60 with optional power column tilt. Column adjustable from 90 to 3 canted. Capacity: 18 X 22 (457mm x 560mm) at 45 18 x 14.5 R,
More informationSCHMIDT HydroPneumaticPress
Maximum orce Range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within the pressing force range 1 220
More informationBENDING ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER
BENDING ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER ATC HYBRID BENDING MACHINE WITH AUTOMATIC TOOL CHANGER VASTLY REDUCED DAILY SETUP TIMES RAPID TURNAROUND BETWEEN JOBS Amada engineered the
More informationDYNA-PRESS SERIES. Electric press brakes LVDGROUP.COM FAST, ACCURATE AND FLEXIBLE BENDING
Electric press brakes DYNA-PRESS SERIES FAST, ACCURATE AND FLEXIBLE BENDING LVDGROUP.COM The Dyna-Press is your perfect bending partner. 24 ton DYNA-PRESS SERIES FAST, ACCURATE AND FLEXIBLE BENDING The
More informationServo/Hydraulic Press Brake. HDS NT Series HDS 5020NT, HDS 8025NT, HDS 1303NT, HDS 1703NT & HDS 2204NT
Servo/Hydraulic Press Brake HDS NT Series HDS 5020NT, HDS 8025NT, HDS 1303NT, HDS 1703NT & HDS 2204NT The HDS NT Series Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears SANDFELD A/S BIRKEGÅRDSVEJ HERNING
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationIndustrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationTAURUS SHEARS BALERS MODEL ACL 662 DP2L
TAURUS SHEARS BALERS MODEL ACL 662 DP2L CONTENT 1 OVERVIEW 2 SHEAR HEAD 3 SQUEEZE BOX 4 MAIN COMPRESSION 5 HYDRAULIC UNIT 6 POWER PACK 7 ELECTRONIC CONTROL UNIT 8 LIFTING JACKS + REAR STABILIZERS 9 OPERATOR
More informationACCELL H HYBRID TECHNOLOGY
ACCELL H HYBRID TECHNOLOGY 2 3 THE ACCELL LINEUP A Complete Line of Y1/Y2 Machines ACCELL H YBRID TECHNOLOGY Accell U ACCELL E THE COMPETITIVE EDGE ACCELL HT HIGH TONNAGE Accell E Accell U Accell H 190
More informationModel No. Model No. Complete. Punch
PUNCH & DIES OILTIGHT & KEYWAY SPECIAL APPLICATION HAND OPERATED PUNCHES Oiltight es with Notches A B C Max Capacity Type BB Drive Hole Optional Adapt for 22.5 3.2 25.4 2.0 Hand-Hyd 60238 60239 60250 60117
More information2013+ DODGE RAM " Kit PART# STOP! READ THIS FIRST!
NOTE: 2013+ DODGE RAM 3500 4" Kit PART# 54346 STOP! READ THIS FIRST! **READ THESE ENTIRE INSTRUCTIONS BEFORE STARTING ANYTHING** or chroming, which can damage the strength and structure of the metal, any
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HG 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HG 1003 ATC HG 1003 ATC Press Brake with Automatic Tool Changer Introduce rush jobs seamlessly Triple or quadruple the amount of setups performed
More information