7440 w. 100th Pl. Bridgeview, IL Phone (708) FAX # (708) th Edition

Transcription

1 7440 w. 100th Pl. Bridgeview, IL Phone (708) FAX # (708) th Edition

2

3 Air Craft Tooling...33, Punches & Dies Punches & Dies...3, 4, 5 Adapters...24, 25 Adjustable Female Dies...25 Beading Dies...19 Bed Deflection Compensators...23 Box Forming Dies...20, 21 Cam Action Hemming Dies...16 Channel Forming Dies...12, 13, 14 Corrugating Dies...14, 19 Curling Dies...18, 19 Die Holders...24 Embossing Dies...19 European Style Tooling..28, 29, 30, 31, 32 Flattening & Hemming Dies...6, 7, 16 Four Way Dies...24 Goose Neck Punches...5, 20, 25 Hemming Dies...16, 17 Hinge & Beading Dies...18, 19 Offset Dies...8, 24 Pipe & Tube Forming Dies...22 Punch & Die Holders...24, 25 Radius Dies...11, 13, 19 Radius Edge Forming Dies..11, 13, 15, 19 Ribbing Dies...19 Rocker Dies...13 Safety Tang...2 Special Application Dies...26, 27 Special Flanging Dies...25 Standing Seam Dies...18, 25 Three High Dies...16 Tonnage Requirements...36 Tooling Forms...35 U Bend Forming Dies...13 Wiping Dies...15 W Dies...12, 25 SEE SAFETY WARNINGS ON INSIDE FRONT COVER 1

4 1 1 /8 2 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

5 90 DEGREE FORMING PUNCHES AND DIES 1 1 /8 SEE SAFETY WARNINGS ON INSIDE FRONT COVER 3

6 90 DEGREE FORMING PUNCHES AND DIES 4 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

7 GOOSENECK PUNCHES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 5

8 30 DEGREE FORMING PUNCHES AND DIES 6 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

9 FLATTENING DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 7

10 OFFSET DIES 8 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

11 OFFSET AND JOGGLE DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 9

12 OFFSET DIES 10 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

13 RADIUS DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 11

14 CHANNEL DIES 12 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

15 ROCKER CHANNEL DIE SEE SAFETY WARNINGS ON INSIDE FRONT COVER 13

16 CORRUGATING DIES 14 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

17 WIPING DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 15

18 HEMMING AND CAM ACTION FORM DIES. REVOLUTIONARY HEMMING SYSTEM THE HEM PRO In the past, hemming die sets have been spring loaded. The first operation makes an acute 30 degree bend, the second operation closes the hem in a gap in front of the tool set. Bending angles other than 30 degrees is impossible with conventional die sets because the lower die floats on springs. Air bending on this unstable surface gives inconsistent results. The new HEM PRO system utilizes air cylinders to open the gap in front of the tools when a hem is needed. The air cylinders can be closed with a foot switch at any time to allow the die to rest on a flat surface. This enables the tooling to be used for air bending like standard acute angle tooling. With the use of a programmable ram depth press brake, Riteway s system can be used to hem and form any angle between 30 to 179 degrees in a single part handling. 16 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

19 STANDING SEAM DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 17

20 CURLING DIES 18 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

21 CURLING DIES RIB FORMING DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 19

22 BOX FORMING DIES 20 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

23 BOX FORMING DIES SEE SAFETY WARNINGS ON INSIDE FRONT COVER 21

24 TUBE FORM DIES 22 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

25 PRESS BED DEFLECTION COMPENSATORS SEE SAFETY WARNINGS ON INSIDE FRONT COVER 23

26 FOUR WAY DIES AND HOLDERS 24 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

27 RAM ADAPTERS AIR FORMING ADJUSTABLE FEMALE DIE RANGE OF OPENINGS Die No. 91 could be considered to be one of the most versatile additions to a press brake. With this type of tool, openings can be arranged from 1/4 to 15. Spacers are provided to produce the required opening. Slotted spacers allow for easy removal to change the die opening. When not in use, spacers are positioned at sides of the die block. These dies can be furnished in solid lengths or sectioned for easier handling. MINIMUM BED WIDTH Die No. A B C D E F 91 A 1-5/8 2-7/8 8 NONE 1/4-3-1/2 3-1/8 91 B 2-1/4 4-1/8 12 NONE 1/ C 2-7/8 5-3/4 16-1/4 3-1/ D 3-1/ /2 4-1/ E 4-1/ /4 5-1/ F 6-3/4 10-1/ / SEE SAFETY WARNINGS ON INSIDE FRONT COVER 25

28 SPECIAL APPLICATION DIES SET 194 Rubber Pad Die for Tube Form. SET 195 Channel Forming SET 196 SET 198 SET 199 SET 200 SET 201 SET 202 SET 203 Curling Dies Tubular Edge for Child s Slide Moldings 26 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

29 SPECIAL APPLICATION DIES Roller Dies for Wire Forming SET 204 SET 205 SET 206 SET 207 SET 208 SET 209 SET 210 SET 211 Table Top Edge Edge Reinforcement Edge Reinforcement SEE SAFETY WARNINGS ON INSIDE FRONT COVER 27

30 EUROPEAN STYLE TOOLING Quick Release Clamping Style Standard Safety Tang SECTIONALIZED PUNCH WIDTHS-835MM (100mm), (300mm),.394 (10mm),.591 (15mm),.787 (20mm), (40mm), (50mm), (200mm), (100mm). SECTIONALIZED DIE WIDTHS-835MM (100mm),.394 (10mm),.591 (15mm),.787 (20mm), (40mm), (50mm), (400mm), (200mm). Riteway Brake Dies Precision Planned European Tooling Features Benefits All punches come standard with a safety tongue Reduced set-up time All punches and dies are manufactured from our industry proven Dura-Tuf alloy steel. High quality chrome-carbon die steel. All punches and dies can be flame hardened to Rockwell C-Scale. All Tools are Precision Planned to a tolerance in critical areas of ±.002. To maintain total quality control and a quick delivery time, all of our tools are manufactured and stocked in our own state of the art press brake tooling facility. 28 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

31 EUROPEAN STYLE TOOLING SEE SAFETY WARNINGS ON INSIDE FRONT COVER 29

32 EUROPEAN STYLE TOOLING 30 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

33 EUROPEAN STYLE TOOLING SEE SAFETY WARNINGS ON INSIDE FRONT COVER 31

34 EUROPEAN STYLE TOOLING 32 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

35 AIRCRAFT FORM PUNCHES & DIES TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR TOOL # W D AIR /2 1/2 AIR /4 AIR /2 7/8 Urethane Type Dies Die No. W H P1 P2 AIR /4 1 1 AIR /8 2 2 AIR /2 3-7/8 3 3 Aircraft-style tooling is designed and manufactured to provide significant forming advantages over standard conventional tooling. The Aircraft profiles are precision planed to enhance air-forming accuracy. In addition, they are highly polished to minimize marking. Aircraft punches are well suited for use with urethane pad dies. Die No. W H W1 D R AIR / AIR / AIR / AIR / AIR /4 1-3/ AIR /4 1-3/ AIR /2 1-3/ AIR / AIR / AIR /2 2-1/ AIR /2 2-1/ AIR / AIR / AIR /2 2-3/ AIR / SEE SAFETY WARNINGS ON INSIDE FRONT COVER 33

36 AIRCRAFT FORM PUNCHES TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR AIR TOOL # W R A AIR / AIR / AIR / AIR / AIR / AIR / AIR / AIR / AIR / AIR / AIR /4.437 min. AIR /4.500 min. AIR /2.562 min. AIR /2.625 min. AIR min. TOOL # H R AIR /4.375 AIR /8.437 AIR /2.500 AIR /8.562 AIR /4.625 AIR AIR /4.875 AIR /2 1.0 TOOL # R AIR AIR AIR AIR AIR AIR AIR AIR AIR SEE SAFETY WARNINGS ON INSIDE FRONT COVER

37 TOOLING FORMS SEE SAFETY WARNINGS ON INSIDE FRONT COVER 35

38 TONNAGE REQUIREMENTS 36 SEE SAFETY WARNINGS ON INSIDE FRONT COVER

39

40 For.Quality.Service.Price Ask For INC w. 100th Pl. Bridgeview, IL Phone (708) FAX # (708)