AIRAM Press Co. LTD Industrial Court Covington, OH
|
|
- Abel Hutchinson
- 6 years ago
- Views:
Transcription
1 AIRAM Press Co. LTD Industrial Court Covington, OH
2 TONNAGE RANGES 100 Ton Press 3 Ton Press Press Tonnage Ranges from 3 to 210 Tons Several Options available to include feeds, transfers, and controls
3 ROLL FORMING Single press system to either pre-punch punch material or cut to length Multiple presses on a common base to perform a variety of operations using a combination of the presses 70 Ton Press 3-35 Ton Presses on a Common Base
4 METAL STAMPING AIRAM s s can be used in multiple metal stamping applications from large tonnage machines pictured on the top to the right to small tonnages pictured on the lower right AIRAM custom builds the press to meet the specifications of the customer 100 Ton Press 12 Ton Press
5 PLASTIC MANUFACTURING AIRAM Presses can be used in numerous plastic manufacturing applications. An AIRAM press can be added into an extrusion line to stamp out precision plastic parts 20 Ton Press 38 x 30 Bed Size 3 stroke, press weight 3750 lbs
6 PAPER MANUFACTURING AIRAM Presses can be added into a paper manufacturing line to provide a cut to length operation. The high speed operation and flying cut off design allows manufacturers to produce parts at the optimum line speed 7 Ton Flying Cutoff Press
7 PRESS LINES A wide variety of feeds (Servo, Air, Gripper) can be mounted to AIRAM Presses for optimum production AIRAM can also build or integrate un-coilers and re-winders to the press to provide a complete press system Servo Roll Feed 3 Ton Press with Air Feed
8 AIRAM PRESSES CURRENTLY IN OPERATION Currently AIRAM has over 5000 presses being used globally. These are just a few of our newer models.
9 ATP Ton Press with 3 Air Tubes 9 Valves Bed Size 93 x x 38 Approximate Press Weight 28,500 Lbs. Press has added isolation material to reduce vibration by 80% Press is equipped with a servo feed
10 ATP Ton Press with 3 Air Tubes and 6 Valves Bed Size 93 X 45 Approximate Press Weight 27,000 LB without a base Press is used to stamp out Automobile Hoods
11 ATP Ton Press with 2 Air Tubes and 4 valves Press Bed 93 x 38 Approximate Press Weight 21,000 Lbs. Press is equipped with an Equalizer Shaft to allow off center loading Press is also equipped with vibration isolation material and mounts
12 ATP Ton Press with 1 Air Tube and 3 Valves Press Bed Size 41 x33 x33 Approx Press Weight 1500 Lbs Press is equipped with and adjustable base Press is also equipped with an air cylinder for a flying cutoff
13 3 X ATP x 35 Ton Presses on a Common Base Each Press Bed is 36 x 36 Total Press System Weight is 37,100 lbs. Presses can be operated individually or simultaneously to perform a combination of applications
14 ATP Ton Press with 1 Air Tube and 3 Valves Press Bed Size is 36 x 32 Approx Press Weight 10,000 Lbs. Press is operated at a 30 Degree Angle Press is used as a scrap cutter to cut the web of heavy duty washers for the construction equipment industry
15 ATP Ton Press with 1 Air Tube and 3 Valves Bed Size is 38 x 30 Approx Press Weight is 3,750 Lbs. Press bed and base were constructed to allow parts to drop through the bed and base for removal
16 ATP Ton Press with 1 Air Tube and 1 Valve Press Bed is 36 x 26 Approx Press Weight is 1,225 Lbs. Press has aluminum plates to reduce mass Press traverses with material in a flying cutoff press operation AIRAM also provided the custom cutoff blades
17 ATP Press System 3 Ton Press with reel, feed, controls, enclosure and die Press Bed Size 13 x 11 Approx Press System Weight 600 Lbs Previously the customer was producing parts by hand with 2 people for 8 hours a day Currently 1 person is operating for 20 minutes per day with the AIRAM Press
18 ATP Press System 3 Ton Press system with reel, loop control sensor, precision guide system, enclosure, and air feed Press Bed Size 25 x 15 Approximate Press System Weight 1800 Lbs. Press produces precision rubber parts for the ink jet printer industry
19 PRESS REBUILD PROGRAM AIRAM will rebuild your existing AIRAM Press to Original Manufacturer Specifications while utilizing existing capital assets. Clean, Re-Machine, Grind, and Paint all Plates and Bases Replace all parts with AIRAM Approved Parts Replace tank, regulator, filter, and shut-off valve Test Run and ensure proper press operation Turn around time is approx 2 weeks
20 PRESS REBUILD BEFORE AFTER
21 PRESS REBUILD BEFORE AFTER
22 PRESS REBUILD BEFORE AFTER
23 AIRAM PRESS FEATURES In addition to the standard air tube these are some of our new and improved features of the AIRAM press.
24 All valves are flange mounted to avoid damage from vibration
25 Polyurethane stops reduces tool and die wear Adjustable Ram Stops allows the press to operate in different stroke lengths
26 Press is equipped with an ASME Certified Air Tank Presses are equipped with an air shutoff valve and regulator
27 Springs are used to return the ram in the up position. All springs are rated and tested by AIRAM
28 Shrink Discs are used to hold the guide post in position
29 AIRAM OPTIONS With over 30 years of experience AIRAM can evaluate your application and build a press to fit the customer needs. These are just a few options we have provided our long time customers.
30 Optional polyurethane and a high dampening nitrile elastomer is added to avoid steel on steel contact which reduces vibration by up to 80%
31 Custom enclosures with tie down switches can be added for additional safety Vibration Mounts can be added for additional vibration isolation
32 Free Standing expanded metal guarding can be built to provide a barrier for the AIRAM Press
33 Remote Flow Control can control the speed of the ram on the down stroke on the fly
34 AIRAM can build controls for your press with a touch screen and PLC to simplify operator use AIRAM can also build basic controls for single stroke applications
Servo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
More informationMINSTER. VX Series Presses VX SERIES. Group Company 40 & 80 TONS CAPACITY BULLETIN 187A
A Group Company MINSTER BULLETIN 187A VX SERIES 40 & 80 TONS CAPACITY TECHNOLOGICALLY ADVANCED TO PROVIDE GREATER FLEXIBILITY AND INCREASED PRODUCTION INTRO With more than thirty years of expertise in
More informationH&O DIE SUPPLY, INC
02030406 R TEL: 04-24733326 A M E R I C A SEYI AMERICA, INC. 203 Lemon Creek Dr., Unit A Walnut, CA 91789. TEL: 909.839.1151 FAX: 909.839.1150 14001 REGISTERED FIRM FM 26194 ISO 9001 SM2-220 ~ 440TONS
More informationAll Greenerd Presses are designed and built to ANSI B (R-2000) compliance. 4-POST HYDRAULIC DEEP DRAW PRESS
All Greenerd Presses are designed and built to ANSI B-11.2 1995 (R-2000) compliance. 4-POST HYDRAULIC DEEP DRAW PRESS Model Number... 4D-562-36 x 36-48/48/33/45 Force of Main Ram... Adjustable 112 to 562
More informationSpartanics M500 PRESS SPECIFICATIONS. Strokes per Minute
M500 PRESS SPECIFICATIONS 5 Ton 3 10 TonCE 15 TonCE 20 TonCE 30 TonCE 30 Ton DTCE 40 TonCE 50 TonCE 50 Ton DTCE 75 TonCE Normally Stocked In Inventory 1 No No No Yes Yes Yes No Yes No No Strokes per Minute
More informationStraight Side Crank Servo. Straight Side Eccentric Gear Servo Press
SDG2 series SDG2-400~200 SDE2 series SDE2-400~200 Straight Side Crank Servo Press Straight Side Eccentric Gear Servo Press Powerful direct drive transmission with flexible and easy-to-use operating system
More informationPower, Speed and Flexibility
Power, Speed and Flexibility The New KIERMAR Advanced High Tonnage Press New thinking. New solutions. We develop the new press solutions. Martin Hansen Managing Director, KIERMAR Technology. Behind him,
More informationMMC CX1 & CX2 SERIES
A Group Company MINSTER BULLETIN 184E P R E S S E S MMC CX1 & CX2 SERIES SINGLE & 2-POINT GAP FRAME PRESSES 45-315 METRIC TONS Material Forming Solutions AFFORDABLE QUALITY WITH MINSTER S INDUSTRY -LEADING
More informationServo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC
Servo/Hydraulic Press Brake With Automatic Tool Changer HD 1003 ATC The HD NT Press Brake An ultra-high precision, down-acting system featuring advanced hydraulics that provide the ultimate in positioning
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationU1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE
U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm
More informationBULLETIN 190A ELECTRIC VEHICLE LAMINATION PRESS EV SERIES PRESSES TONS CAPACITY
BULLETIN 190A ELECTRIC VEHICLE LAMINATION PRESS EV SERIES PRESSES 250-450 TONS CAPACITY EV TABLE OF CONTENTS 3 Key Features 4 Standard Features 8 Standard Options 8 Production Management Control (PMC)
More informationLinMot Industrial Linear Motors LinMot linear motors are direct electromagnetic drives. The linear motion is generated without wear, with no intermedi
Industrial Linear Motors Purely electrical drive system Freely positionable along the entire stroke For precise and dynamic positioning tasks Linear motor technology provides longer life IP67 protection
More informationCWP/Schuler Coil Processing/Transfer System Solution
CWP/Schuler Coil Processing/Transfer System Solution Article Submitted by: Bruce Bean Senior Sales Engineer Formtek Maine Ph: 1-800-247-2645 Ext. 201 Fx: 207-426-8868 Mobile: 207-692-4022 bbean@formtekinc.com
More informationWORLDWIDE DIE DESIGN AND CONSTRUCTION SPECIFICATIONS EUROPE ONLY NUMERICAL INDEX DESIGN STANDARDS FOR ROLLFEED RF400 DAGENHAM
NUMERICAL INDEX UNIT PAGE ITEM SUBJECT 8M 5 GENERAL INFORMATION 5. START OF DESIGN 5.2 CONSTRUCTION OF DIES 5.3 DIE FIXING 5. SHUT HEIGHT 5.5 MATERIAL. GUIDING UPPER-LOWER DIE. THRUST UPPER-LOWER DIE.8
More informationPelletising Systems. Moulding & Recycling Underwater pelletising systems for up to 15,000kg/hr. Strand pelletisers
Pelletising Systems 0 Underwater pelletising systems for up to 5,000kg/hr Our modular pelletising systems are highly cost efficient & cover a wide range of applications: Primary pelletising Masterbatch
More informationMetal Stamping & Forming Equipment
COMPANY and PRODUCT OVERVIEW Metal Stamping & Forming Equipment Mechanical / Hydraulic / Servo Presses and Peripheral Equipment High performance metal stamping & forming production equipment OUR COMPANY
More informationIPR M2i Tablet Press Pictures INDUSTRIAL PHARMACEUTICAL RESOURCES, INC PAGE 1 OF 3
IPR M2i Tablet Press Pictures M2i Tablet Press Rotary Feeder INDUSTRIAL PHARMACEUTICAL RESOURCES, INC PAGE 1 OF 3 IPR M2i Tablet Press Pictures Upper Pressure Roll with Punch Penetration Drive Motor &
More informationTABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
More informationPUNCH PRESS. ermaksan.com.tr
PUNCH PRESS ermaksan.com.tr PUNCH PRESS PUNCH PRESSES CNC SERVO & ELECTRIC TURRET PUNCH PRESS ETP-S Faster, More Precise, More Environment Friendly... 4 Servo-Electric punching system 20 tons and 0 tons
More informationStep 5 Install the frame rail insert into the frame.
COR-6372S, COR-6372D 63-72 C-10 Rear Coil-over KIT Tool s for the job Car Lift Floor Jack Chalks Jack Stands Standard Wrench set Standard Socket set Spring Compressor Phneumatic/ Electric Grinder Phneumatic/
More informationSTANDARD FEATURES: Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block Hydraulics: Optional Lengths Available Weight (NET) lbs 2600
IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching
More informationMETHODS FOR CLOSED LOOP COATING THICKNESS CONTROL. Robert A. Pasquale President New Era Converting Machinery P.O. Box 377 Hawthorne, NJ 07507
METHODS FOR CLOSED LOOP COATING THICKNESS CONTROL Robert A. Pasquale President New Era Converting Machinery P.O. Box 377 Hawthorne, NJ 07507 INTRODUCTION In this presentation we will address various methods
More informationSide Seal Horizontal Shrink Wrapper
ARPAC 9511 West River Street, Schiller Park, IL 60176 US Phone:847-678-9034 Fax:847-671-70 E-Mail: atillander@arpac.com Web site:www.arpac.com Item # ARPAC TS37, Side Seal Horizontal Shrink Wrapper QUOTE
More informationP/M 150 Press - Designed and built in Brazil
P/M 150 Press - Designed and built in Brazil Fernando Iervolino Technical Director Qualisinter Produtos Sinterizados Ltda Keywords: Compaction, Press, Tool Abstract: The Brazilian market doesn t have a
More informationSHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. UNITED KINGDOM OFFICE TEL: +44 (0) FAX: +44 (0)
MAYOENGINEERING LTD SHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. OFFICE TEL: +44 (0)1623 651102 FAX: +44 (0)1623 414495 E-MAIL: sales@mayoengineering.com WEB SITE: www.mayoengineering.com
More informationMETAL STAMPING & FORMING EQUIPMENT. WFSeries. Warm / Hot Forging Presses ton
METAL STAMPING & FORMING EQUIPMENT WFSeries Warm / Hot Forging Presses 400. 600. 800. 1000. 1600 ton WF1 and WF2 Series Warm / Hot Forging Presses Stamtec WF1 and WF2 Series Warm / Hot Forging Presses,
More informationFabrication Series Hydraulic Press Brake 14' x 242 Tons
Box 20, Grp. 200, RR2, 390 Eagle Drive, Winnipeg, MB R3C 2E6 Canada Toll Free 800-665-8089 Ph: 204-779-7791 Fax: 204-779-7796 Email: sales@empire-machinery.com December 18, 2017 Technical Specifications:
More informationCupping press systems from a single source
Cupping press systems from a single source Forming the Future Safeguard your competitive edge with us Welcome to Schuler As the global leader for advanced metalforming technology, Schuler supplies presses
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationRousselle Single Point Gap Frame (Cast Iron)
Single Point Gap Frame 15 to 110 Tons Rousselle Single Point Gap Frame (Cast Iron) Standard Features Cast Frame Air Clutch and Shoe Brake Crankshaft Motion (40 Ton and Up) Eccentric Shaft Motion (15 and
More informationABOVE AND BEYOND HONING. HTG Series. Heavy Duty Horizontal Tube Honing System
ABOVE AND BEYOND HONING HTG Series Heavy Duty Horizontal Tube Honing System SUNNEN S NEW HTG TUBE HONE... MORE SPEED, MO For decades, Sunnen s GH-210 has been the industry standard for high precision honing
More informationCrestline Altra Series TM Dampener. Installation Instructions. Heidelberg GTO. X /98 Rev-A
Crestline Altra Series TM Dampener Installation Instructions Heidelberg GTO X88-63 7/98 Rev-A GENERAL INFORMATION ATTENTION CRESTLINE ALTRA SERIES TM DAMPENER OWNER! Accel Graphic Systems provides parts
More informationBrandt Automatic Edgebander Ambition 1650 C Servo
TECH SPEC PAGE 1 Brandt Automatic Edgebander Ambition 1650 C Servo NOTE: THE BELOW SPECS ARE THE ORIGINAL SPECIFICATIONS AND WE DO NOT GURANTEE THAT THE ITEMS BELOW ARE WITH THIS MACHINE. PC-20 Program
More informationUnits. Hand Held CORPORATION Self-Contained, Air/Oil, and Hydraulic units for clinching sheet metal.
733357F Hand Held Self-Contained, Air/Oil, and Hydraulic units for clinching sheet metal. Units An economical solution to Tog-L-Loc sheet metal assemblies Well-suited for low volume production and/or prototyping
More informationRam Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
More informationThe Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED PROPELLER ROOF VENTILATORS. Models BSHD / BSHB
The Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED ROOF VENTILATORS Models BSHD / BSHB CATALOG 632 November 12 Hooded Roof Ventilators Models BSHD BSHB Aerovent Low Profile Hooded Roof Ventilators
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Stand ard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationGranulation and automation technology for the plastics industry
Granulation and automation technology for the plastics industry Choose the system partner who is also a competent dialogue partner: GETECHA. For more than five decades, we have been acting as consultants
More informationRS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items
www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationCrestline Dampening System. Installation Instructions. A.B. Dick 350, 360, 375 Single & Dual Lever Machines. X /01 Rev-A
Crestline Dampening System Installation Instructions A.B. Dick 350, 360, 375 Single & Dual Lever Machines X88-20 01/01 Rev-A GENERAL INFORMATION ATTENTION CRESTLINE DAMPENER OWNER! Accel Graphic Systems
More information1000 Series Bellow, 2.0 Stud/Trunnion 2.9 Shock
Part # 11012401-55-57 GM B-Body Front HQ Shockwave, OEM Control Arms Recommended Tools 1000 Series Bellow, 2.0 Stud/Trunnion 2.9 Shock THE CONTROL ARMS NEED TO BE REINFORCED IN THE AREA THAT THE TRUNNION
More informationBASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) 91-97802-00007, 9315-11111 info@basantgroup.com www.basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS
More informationEASY TO USE POWERFUL & FLEXIBLE
EASY TO USE POWERFUL & FLEXIBLE ENERGY SAVING DCC130- Cold Chamber Die Casting Machine LK Website:www.lktechnology.com COLD CHAMBER DIE CASTING MACHINE Hydraulic Driven Die Height Adjustment Clamping State
More informationWHY CHOOSE ACCURPRESS TOOLING?
TOOLING SYSTEMS WHY CHOOSE ACCURPRESS TOOLING? Whether you are looking for general purpose tooling or special application configurations, Accurpress is committed to the highest level of quality and customer
More informationAMADA EMZ 3510 NT. KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
AMADA EMZ 3510 NT KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 98 987-0 info@maschinen-kistner.de www.maschinen-kistner.de LIST OF CONTENTS Machine info........... Technical data........
More informationAD-SERVO HYBRID PRESS BRAKES
AD-SERVO HYBRID PRESS BRAKES It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT machines
More informationSELF-ASSESSMENT FORM. For Occupational Health And Safety. Punch Press POSITIVE CLUTCH (FULL REVOLUTION MECHANICAL PRESS)
Equipment identification: Punch Press FRICTION CLUTCH (PARTIAL REVOLUTION MECHANICAL PRESS) The slide action is controlled by a flywheel. It is possible to stop the slide before the cycle has been completed.
More informationWHITNEY PRECISION PRESS BRAKES and SHEARS
WHITNY PRISION PRSS RAKS and SHARS WPH WP WPA WP WPS 800 338 5471 megafab.com WPH Series Precision Press rakes Single or Tandem Machines from 90 Tons to 335 Tons of bending force Available in () asic and
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationChin Fong/ Stamtec Modern Manufacturing Facilities
Chin Fong/ Stamtec Modern Manufacturing Facilities Precision Tooth Profile Grinding 2 Diameter Gear Helical Gear Griding Double Helical Gear Shaper 3mm Diameter Gear Modern Weld Facilities CNC Floor-Type
More informationMechanical Power Presses
Mechanical Power Presses 1 Mechanical power presses OSHA 1910.217 is the vertical regulation OSHA 1910.212, general requirement; 1910.219 MPTA ANSI B11.1-1998 for best safety practices 350,000 in the U.S.
More informationDRIVE SOLUTIONS FOR THE TYRE INDUSTRY DRIVESYSTEMS
INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES EN DRIVE SOLUTIONS FOR THE TYRE INDUSTRY DRIVESYSTEMS NORD DRIVESYSTEMS Intelligent Drivesystems, Worldwide Services NORD DRIVE SOLUTIONS FOR THE TYRE INDUSTRY
More informationAgenda 10/4/2016. Servo Technology Experience 2016 TO (Nashville) SERVE, TO STRIVE, WITHOUT COMPROMISE.
Servo Technology Experience 2016 (Nashville) Agenda Why transfers? Transfer Technology History How Transfer s Integrate with Presses Transfer Tooling Options Auxiliary Tooling & Die Options New Technologies
More informationWaterjet Cutting System
- For your success Customize Expand Simplify World's No.1 of WATERJET World's No.1 of WATERJET SUPERJET Features of Waterjet Cutting 1 No heat is produced Since this waterjet cutting is non-contact machining
More informationPF Pressure Plate Filter. Recovery of clear filtrates
PF Pressure Plate Filter Recovery of clear filtrates Administrative building of BHS-Sonthofen The company BHS-Sonthofen, headquartered in Sonthofen, Germany, is an owner-operated group of companies in
More informationThe ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
More informationPrecision Pulling and Cutting for Medical Tubing Products
Precision Pulling and Cutting for Medical Tubing Products Conair s extensive experience in medical grade extrusion equipment offers processors a wide selection of precision pulling and cutting equipment
More informationMETAL STAMPING & FORMING EQUIPMENT. Straight Side. Mechanical Presses tons
METAL STAMPING & FORMING EQUIPMENT Straight Side Mechanical Presses S2 165. 220. 330. 440. 660. 880-3300 tons S2 SERIES Straight Side Mechanical Presses Durable Reliable Versatile STRAIGHT SIDE MECHANICAL
More informationCenterless Grinders. ECG series
Centerless Grinders ECG series COMPANY PROFILE GRINDING APPLICATIONS e-tech Machinery is a world class machine tool builder that strives to produce and service various kinds of grinding machines, with
More informationTechnical Details Coiler head / spool diameter Spool weight (depending on type of spool winding axle)
MOTROL 500 Fig. 1 MOTROL 500 Fig. 2 Coiler head RAPID 480SL Fig. 3 Spool winding axle Fig. 4 Label printer Fig. 5 Label Sample MOTROL 500 This motor driven coil and spool winder enables to wind materials
More informationABOUT. In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery.
ABOUT US In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery. In 1973 Baertec Machinery took its place in Bursa Industry by producing
More informationPractical Use of Servo Hydraulic Cushions In Stamping Operations
Practical Use of Servo Hydraulic Cushions In Stamping Operations by Ali Fallahiarezoodar (1), Darrell Quander, Jr. (2), Pratik Mehta (1), Taylan Altan (1) (1) Center for Precision Forming, The Ohio State
More informationVCSG Vertical Clean Steam Generator
Page 1 of 8 TI-P486-1 CH Issue 1 VCSG Vertical Clean Steam Generator Description The Spirax Ultrapure vertical clean steam generator (VCSG) is designed to create clean steam, with plant steam as the energy
More informationAltra Series Dampener
Crestline TM Altra Series Dampener Installation Instructions Ryobi 512 X88-69 10/98 Rev-A GENERAL INFORMATION ATTENTION CRESTLINE ALTRA SERIES TM DAMPENER OWNER! Accel Graphic Systems provides parts and
More informationNORCO INDUSTRIES COMPANY OVERVIEW
NORCO INDUSTRIES COMPANY OVERVIEW BRIEF HISTORY Norco Industries is a privately owned 390,000 square foot manufacturing facility located in Elkhart, IN. Our Elkhart facility has experienced continued growth
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Aftermarket and Factory 5.0, 8.4 and 6.1 MyGig Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 Current* Dodge Ram (Kit part number 1009-6503) *NOTE:
More informationChemical Injection Pump. Quick Start Guide. Pump Models P-075-M1/ ALU P-075-M1/ SS CLASS 1 DIV 1
Chemical Injection Pump Quick Start Guide Pump Models P-075-M1/8-1750-12 ALU P-075-M1/8-1750-12-SS CLASS 1 DIV 1 Overview SPEC Chemical Injection Pump - Quick Start Guide SPEC Chemical Injection Pumps
More informationD & F Of Pneumatic Riveting Machine
PN-001 PN-002 PN-003 PN-004 PN-005 PN-006 PN-007 PN-008 PN-009 PN-010 PN-011 PN-012 PN-013 PN-014 PN-015 PN-016 PN-017 PN-018 PN-019 PN-020 PN-021 PN-022 PN-023 PN-024 PN-025 PN-026 PN-027 PN-028 Fabrication
More informationHIGH PERFOMANCE SERVO PRESS P2H-FX SERIES PRESSES TONS CAPACITY P2H-FX
HIGH PERFOMANCE SERVO PRESS P2H-FX SERIES PRESSES 63-160 TONS CAPACITY P2H-FX P2H-FX SERVO TABLE OF CONTENTS 3 Key Features 4 Standard Features 5 Motion Profiles 7 Production Management Control (PMC) 8
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationABOUT US. Accurpress Precision Forming Systems
ACCELL H Accurshear Original CNC Accurpress 1990 Original Accurshear 1976 Original Accurpress 1975 ABOUT US With over 40 years in the marketplace, Accurpress continues to build on its tested history to
More informationAmthorInternational.com. we are more than made in America. We are reliable solutions keeping you on the road. CALL TODAY TO ORDER YOUR PROPANE TRUCK!
PROPANE TANK LINE PAGE 2 INTRODUCTION TABLE OF CONTENTS INTRODUCTION PAGE 3 TABLE OF CONTENTS Page 3 Introduction Page 4 The Amthor Difference Page 5 Customer Testimonial Page 6 Propane Bobtail Page 8
More informationInstallation and Service Manual
Solar Production Equipment Corp Chemical Injection Pump Installation and Service Manual Pump Models P-075-M1/8-1750-12 ALU P-075-M1/8-1750-12-SS CLASS 1 DIV 1 Table of Contents Overview... 4 Pump Specifications
More informationPRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES
PRESS BRAKES PRESS BRAKE DIES STRAIGHT-SIDE-TYPE PRESS BRAK POWER BENDING BRAKES HAND OPERATED BENDING BRAKES SPECIAL METAL-FORMING MAC ~ INES A Tradition of Quality and Value since 1899 DREIS & KRB MP
More informationThe innovations. deb 720 deb 540. Missler bandsaws are equipped with Autoregulation as a standard
The innovations An original geometric design with an exceptional stability. Missler bandsaws are equipped with Autoregulation as a standard - The box type machine construction consisting of two strongly
More informationMULTI HYDRAULIC STEELWORKER
MULTI HYDRAULIC STEELWORKER MULTI 3 2 1 4 5 Hydraulic steelworker The Kingsland Multi range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for
More informationHURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance
FORM 159 0205 07/15 HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog #391 0205 2015 by Hurst Performance Thank you for purchasing the Hurst Comp/Plus Shifter.
More informationw w w. a u t o s t e e l. o r g
Great Designs in Steel is Sponsored by: AK Steel Corporation, ArcelorMittal Dofasco, ArcelorMittal USA, Nucor Corporation, Severstal North America and United States Steel Corporation Tailor Welded Coils:
More informationDYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
More informationDie cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid
Die cutting and stripping machine with hot foil stamping model Brausse SIGNA 1050F Hybrid All machines installed by Brausse Europe will have the VinTechMa label. www.vintechma.com 1 Highlights of all Brausse
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationServo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt
Servo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt The Servo-Torq Rim block cutters are ideal for use in-line after the plodder extruder. They can handle single, twin or even
More informationAccessories Catalogue
Accessories Catalogue GEKA ACCESSORIES Since 1919, GEKA Group has been manufacturing Ironworkers for angle work, flats and profiles - for black iron, metal workshops, metal constructions, telecommunication
More informationSBZ 122 Family of models PROFILE MACHINING CENTRES
SBZ 122 Family of models PROFILE MACHINING CENTRES elumatec AG Pinacher Strasse 61 75417 Mühlacker Germany Phone +49 7041 14-0 Fax +49 7041 14-280 mail @ elumatec.com www.elumatec.com The right to make
More informationNORTH AMERICA ONLY PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED)
PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED) PAGE 3. FOR DRAWING TEMPLATE CONTACT STAMPING DESIGN ENGINEERING DEPT. (313)337-6514. EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER
More informationMobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feeder Tipping Grid Vibrating double deck grid option Operated
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationWorld Series Monorail Hoists
World Series Monorail Hoists Capacities from 1 to 15 ton Shaw-Box World Series monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing
More informationModern ManufacturingServices.LLC. Attachments And Auxiliary Equipment
Attachments And Auxiliary Equipment Proudly Manufactured in the USA Modern ManufacturingServices.LLC 640 East Main Street Palmyra NY 14522 Phone 585-289-4261 Fax 585-289-7909 Unwinds And Folding Systems
More informationDEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS
DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS (By authority conferred on the director of the department of licensing and regulatory affairs by sections
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationThe Anatomy of a Drum Filter
The Anatomy of a Drum Filter Theory of Operation Dirty air is introduced into the Drum Filter Enclosure The Main System Fan pulls the air across the filter media The dirty particles are vacuumed off the
More informationServ-O-Spray. Repeatable Precision
Serv-O-Spray Repeatable Precision Serv-O-Spray Repeatable Precision Serv-O-Spray delivers precise, repeatable shots of lubricant, and is ideal for any operation where controlled, intermittent fluid application
More informationwww MK-Electronic de Parts and Diagrams7
7 Right Hand Covers 7-2 Left Hand Covers 7-4 Center Covers 7-6 Electronics Module 7-8 Control Panels 7-10 Carriage Assembly 7-12 Scan-Axis Assemblies 7-14 Paper Path Assemblies 7-16 Media Entry Assemblies
More informationDG175 GC to DG450 GC GAS GENERATOR SETS
DG175 GC to DG450 GC GAS GENERATOR SETS The Cat Spark-Ignited Generator Product Line For Stationary Applications 175-450 ekw, 60 Hz G14.2L and G21.9L spark-ignited engines OUR PROMISE. YOUR POSSIBILITY.
More information