PARTS MANUAL. Manual P/N Rev Companion to P/N SN Range: Current AGCO

Transcription

1 PARTS MANUAL Manual P/N Rev Companion to P/N SN Range: Current AGCO

2 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER INTERNET Crary Industries th St. NW P.O. Box 849 West Fargo, ND Mon. - Fri. 8 a.m. to 5 p.m. Central Standard Time Fax: For service: serv@crary.com Visit us on the Send us Your Warranty Card Please take time to fi ll in the information requested on the card. When you send in the completed card, we register your Air Reel and start coverage under our limited warranty. Two serial number stickers are included with each Air Reel. The decals are located on the Air Reel manifold. Place one sticker on the warranty registration card and mail it back to Crary Industries. Place the second sticker in the owner s manual for future reference.

3 PARTS ORDERING INFORMATION For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Air Reel to provide the most effi cient service. See information below for how to identify and record the serial number for your Air Reel. ILLUSTRATION AND TEXT This parts catalog is arranged to assist in identifying Air Reel parts. All parts are illustrated in either assembled or exploded views. Except for some common hardware, all parts are identifi ed with an item number that corresponds to the Item column on the corresponding parts information table. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the Air Reel. Crary replacement parts are available from your Crary Dealer. To obtain prompt, effi cient service, remember to give the dealer the correct part description and serial number of the Air Reel. When ordering parts for your unit provide the following: 1. The SERIAL NUMBER of your Air Reel. 2. The PART NUMBER of the part. 3. The PART DESCRIPTION. 4. The QUANTITY needed. WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fi t on this unit. SERIAL NUMBER LOCATION Give your authorized Crary dealer the serial number of your Air Reel when ordering parts, requesting service, or any other information. Record the serial number in the space provided below and on the warranty and registration card. The serial number is located on the manifold. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Figure 2, Serial number decal Figure 1, Serial number location Page iii

4 SECTION Contents PAGE AIR MANIFOLD (18 & 20 HEADERS)... 2 AIR MANIFOLD (22, 24 & 25 HEADERS)... 4 AIR MANIFOLD (30 & 35 HEADERS)... 6 AUXILIARY REEL TINE KIT BAT TUBE/REEL TINE DECALS DRIVELINE/C FLANGE ASSEMBLY ECCENTRIC ARM ASSEMBLY ECCENTRIC ARM/HYDRAULIC MOTOR ECCENTRIC MOUNT ASSEMBLY ECCENTRIC MOUNT PLATE/ROLLER (LH) ECCENTRIC MOUNT PLATE/ROLLER (RH) FAN HOSE ASSEMBLY GEARBOX/FAN (PRE 08 FAN) GEARBOX/FAN ( 08 & LATER FAN) GEARBOX/FAN EXTENSION KIT GEARBOX MOUNT/DRIVE KIT GEARBOX REPLACEMENT PARTS IDLER GEAR AND AIR TUBE... 8 REEL ARM MOUNT (ELECTRIC OEM FORE & AFT) REEL ARM MOUNT (MANUAL OEM FORE & AFT) REEL ARM MOUNT (GLEANER 2 & 3 SERIES) REEL BAT ARM REEL BAT ASSEMBLY (18-25 HEADERS) REEL BAT ASSEMBLY (30-35 HEADERS) RIGHT HAND DRIVE KIT (18 HEADERS) RIGHT HAND DRIVE KIT (20-24 HEADERS) RIGHT HAND DRIVE KIT (25 CHALLENGER & GLEANER 8200 HEADERS) RIGHT HAND DRIVE KIT (25 GLEANER 5, 7 & 8 SERIES HEADERS)...46 RIGHT HAND DRIVE KIT (30-35 HEADERS) SWITCH/MOUNT PLATE ASSEMBLY PARTS INDEX... 57

5 Parts Catalog Air Reel AGCO Headers Page 1

6 AIR MANIFOLD 18 & 20 HEADERS 11/07 Page 2

7 11/07 18 & 20 HEADERS AIR MANIFOLD ASSEMBLY, AIR MANIFOLD ITEM PART NUMBER DESCRIPTION FOOT FOOT DECAL, SAFETY (CAUTION) DECAL, WARNING DECAL, CRARY AIR REEL WASHER, 3/8" FLAT ZP BOLT, 3/8" X 1" CARRIAGE NC GR5 ZP SCREW, 11/32" X 7/8" HWH AB THREAD ZP NUT, 3/8" NE NYLOCK ZP BOLT, 3/8" X 4" CARRIAGE NC GR5 ZP DECAL, CENTER MANIFOLD DIRECTION PILLOWBLOCK, STAMPED STEEL INSERT, BEARING, 1" HEX COLLAR, 1" HEX, SET SHIELD, DRIVE SHAFT (52.75") SHIELD, DRIVE SHAFT (59.50") SHIELD, DRIVE SHAFT (62.25") SHIELD, DRIVE SHAFT (64.00") SHIELD, DRIVE SHAFT (82.50") WELDMENT, IDLER MOUNT CLAMP, RIGHT HAND WELDMENT, IDLER MOUNT CLAMP, LEFT HAND MANIFOLD, F.A.R. (18 FOOT) MANIFOLD, F.A.R. (20 FOOT) WELDMENT, END CLAMP, RIGHT HAND (W/MOTOR MNT) WELDMENT, END CLAMP, LEFT HAND (W/MOTOR MNT) SHAFT, REEL DRIVE (203.13") SHAFT, REEL DRIVE (227.13") ASSEMBLY, HUB/PINION GEAR 4 4 A HUB, PINION GEAR 1 1 B RING, PINION RETAINER 2 2 C GEAR, IDLER, 1.575" BORE 1 1 D BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP 1 1 E NUT, 5/16" NE NYLOCK ZP 4 4 F BOLT, 5/16" X 2-1/2" HHCS GR5 ZP STRIPING, AIR REEL (NOT SHOWN) 9 ft. 9 ft. Page 3

8 AIR MANIFOLD 22, 24 & 25 HEADERS 11/07 Page 4

9 11/07 22, 24 & 25 HEADERS AIR MANIFOLD ASSEMBLY, AIR MANIFOLD ITEM PART NUMBER DESCRIPTION FOOT FOOT FOOT DECAL, SAFETY (CAUTION) DECAL, WARNING DECAL, CRARY AIR REEL COUPLER, 1" HEX SHAFT WASHER, 3/8" FLAT ZP BOLT, 3/8" X 1" CARRIAGE NC GR5 ZP SCREW, 11/32" X 7/8" HWH AB THREAD NUT, 5/16" NE NYLOCK ZP NUT, 3/8" NE NYLOCK ZP BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP BOLT, 3/8" X 4" CARRIAGE NC GR5 ZP DECAL, CTR MANIFOLD DIRECTION PILLOWBLOCK, STAMPED STEEL INSERT, BEARING, 1" HEX COLLAR, 1" HEX, SET SHIELD, DRIVE SHAFT (52.75") SHIELD, DRIVE SHAFT (79.38 ) SHIELD, DRIVE SHAFT (89.50 ) SHIELD, DRIVE SHAFT (92.00") SHIELD, DRIVE SHAFT (74.12") SHIELD, DRIVE SHAFT (51.00 ) SHIELD, DRIVE SHAFT (28.00 ) SHIELD, DRIVE SHAFT (38.75 ) WELDMENT, IDLER MOUNT CLAMP, RIGHT HAND WELDMENT, IDLER MOUNT CLAMP, LEFT HAND MANIFOLD, F.A.R. (22 FOOT) MANIFOLD, F.A.R. (24 FOOT) MANIFOLD, F.A.R. (25 FOOT) WELDMENT, END CLAMP, RIGHT HAND (W/MOTOR MOUNT) WELDMENT, END CLAMP, LEFT HAND (W/MOTOR MOUNT) SHAFT, REEL DRIVE (239.75") SHAFT, REEL DRIVE (11.13") SHAFT, REEL DRIVE (36.13 ) SHAFT, REEL DRIVE (46.50 ) ASSEMBLY, HUB/PINION GEAR A HUB, PINION GEAR B RING, PINION RETAINER C GEAR, IDLER, 1.575" BORE D BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP E NUT, 5/16" NE NYLOCK ZP F BOLT, 5/16" X 2-1/2" HHCS GR5 ZP STRIPING, AIR REEL (NOT SHOWN) ft ft. 13 ft. Page 5

10 AIR MANIFOLD 30 & 35 HEADERS 11/07 Page 6

11 11/07 30 & 35 HEADERS AIR MANIFOLD ASSEMBLY, AIR MANIFOLD ITEM PART NUMBER DESCRIPTION FOOT DECAL, SAFETY (CAUTION) DECAL, WARNING DECAL, CRARY AIR REEL WASHER, 3/8" FLAT ZP BOLT, 3/8" X 1" CARRIAGE NC GR5 ZP SCREW, 11/32" X 7/8" HWH AB THREAD ZP NUT, 5/16" NE NYLOCK ZP NUT, 3/8" NE NYLOCK ZP BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP BOLT, 3/8" X 4" CARRIAGE FULL THREAD GR DECAL, CENTER MANIFOLD DIRECTION PILLOWBLOCK, STAMPED STEEL INSERT, BEARING, 1" HEX COLLAR, 1" HEX, SET SHIELD, DRIVE SHAFT (18.25") SHIELD, DRIVE SHAFT (11.69 ) SHIELD, DRIVE SHAFT (79.38") SHIELD, DRIVE SHAFT (96.12 ) SHIELD, DRIVE SHAFT (79.38") SHIELD, DRIVE SHAFT (96.12 ) SHIELD, DRIVE SHAFT (79.38") SHIELD, DRIVE SHAFT (96.12 ) WELDMENT, IDLER MOUNT CLAMP, RIGHT HAND WELDMENT, IDLER MOUNT CLAMP, LEFT HAND COUPLER, 1" HEX SHAFT MANIFOLD, F.A.R. (30 FOOT-L) MANIFOLD, F.A.R. (35 FT.-S) WELDMENT, END CLAMP, RIGHT HAND (W/MOTOR MNT) WELDMENT, END CLAMP, LEFT HAND (W/MOTOR MNT) SHAFT, REEL DRIVE (239.75") SHAFT, REEL DRIVE ( ) SHAFT, REEL DRIVE (112.06") SHAFT, REEL DRIVE ( ) SHIELD, DRIVE SHAFT (59.50") SHIELD, DRIVE SHAFT (79.38 ) ASSEMBLY, HUB/PINION GEAR FOOT A HUB, PINION GEAR 1 1 B RING, PINION RETAINER 2 2 C GEAR, IDLER, 1.575" BORE 1 1 D BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP 1 1 E NUT, 5/16" NE NYLOCK ZP 4 4 F BOLT, 5/16" X 2-1/2" HHCS GR5 ZP STRIPING, AIR REEL (NOT SHOWN) 19 ft. 24 ft. Page 7

12 IDLER GEAR AND AIR TUBE ALL MODELS 11/07 Page 8

13 11/07 ALL MODELS IDLER GEAR AND AIR TUBE ITEM PART NUMBER ASSEMBLY, IDLER GEAR AND AIR TUBE DESCRIPTION 18 FT. 20 FT. 22 FT WASHER, 3/8" FLAT ZP BOLT, 3/8" X 2" HHCS GR5 ZP NUT, 3/8" CENTERLOCK ZP ASSEMBLY, IDLER GEAR (INCLUDES ITEMS 5-10) FT GEAR, IDLER, 1.575" BORE BEARING, RADIAL 17MM RING, PINION RETAINER ADAPTOR, SHOULDER BORE BOLT, 5/16" X 1-1/4 GR5 HHCS NC ZP NUT, 5/16" NE NYLOCK ZP ASSEMBLY, REEL BAT ARM, 6 BAT SEAL, FOAM, AIR TUBE WELDMENT, AIR TUBE ASSEMBLY, DOUBLE AIR TUBE WELDMENT SCREW, 11/32" X 7/8" HWH AB THREAD ZP ITEM PART NUMBER ASSEMBLY, IDLER GEAR AND AIR TUBE DESCRIPTION 25 FT. 30 FT WASHER, 3/8" FLAT ZP BOLT, 3/8" X 2" HHCS GR5 ZP NUT, 3/8" CENTERLOCK ZP ASSEMBLY, IDLER GEAR (INCLUDES ITEMS 5-10) FT GEAR, IDLER, 1.575" BORE BEARING, RADIAL 17MM RING, PINION RETAINER ADAPTOR, SHOULDER BORE BOLT, 5/16" X 1-1/4 GR5 HHCS NC ZP NUT, 5/16" NE NYLOCK ZP ASSEMBLY, REEL BAT ARM, 6 BAT SEAL, FOAM, AIR TUBE WELDMENT, AIR TUBE ASSEMBLY, DOUBLE AIR TUBE WELDMENT SCREW, 11/32" X 7/8" HWH AB THREAD ZP Page 9

14 REEL BAT ARM ALL MODELS 11/07 REEL BAT ARM ASSEMBLY ( 22346) ITEM PART NUMBER DESCRIPTION BEARING W/CAP (INCLUDES ITEMS 2-4) BEARING CAP, PLASTIC BEARING BASE, PLASTIC WASHER, 1/4 FLAT ZP BOLT, 5/16 X 2 GR5 HCS ZP NUT, 5/16 CENTERLOCK NC ZP BOLT, 5/16 X 1-1/2 GR5 HEX CPS ZP NUT, 5/16 NE NYLOCK ZP BOLT, 5/16 X 7/8 NC HHCS GR5 ZP SECTION, INTERNAL GEAR REEL ECCENTRIC ARM 6 Page 10

15 11/07 ALL MODELS ECCENTRIC MOUNT ASSEMBLY ASSEMBLY, BAT & ECCENTRIC MOUNT ITEM PART NUMBER DESCRIPTION ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER, RIGHT HAND ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER, LEFT HAND (NOT SHOWN) BOLT, 3/8" X 1" CARRIAGE NC GR5 ZP WASHER, 3/8" SAE FLAT ZP NUT, 3/8" CENTERLOCK ZP 6 Page 11

16 ECCENTRIC MOUNT PLATE/ROLLER ALL MODELS 11/07 ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER (LEFT HAND) ( 24920) ITEM PART NUMBER DESCRIPTION PLATE, ECCENTRIC ROLLER MOUNT WASHER, 3/8" FLAT ZP NUT, 3/8" CENTERLOCK ZP WASHER, 5/16" FLAT ZP BUSHING, ROLLER BEARING, RADIAL ROLLER, PLASTIC, 3" SM, VIRGIN UHMW BOLT, 3/8" X 2" HHCS GR5 ZP 3 Page 12

17 11/07 ALL MODELS ECCENTRIC MOUNT PLATE/ROLLER ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER (RIGHT HAND) ( 24919) ITEM PART NUMBER DESCRIPTION PLATE, ECCENTRIC ROLLER MOUNT WASHER, 3/8" FLAT ZP NUT, 3/8" CENTERLOCK ZP WASHER, 5/16" FLAT ZP BUSHING, ROLLER BEARING, RADIAL ROLLER, PLASTIC, 3/8" SM, VIRGIN UHMW BOLT, 3/8" X 2" HHCS GR5 ZP 3 Page 13

18 REEL BAT ASSEMBLY 18, 20, 22, 24 & 25 HEADERS 11/07 Page 14

19 11/07 18, 20, 22, 24 & 25 HEADERS REEL BAT ASSEMBLY ASSEMBLY, REEL BAT (16 FT. THRU 25 FT) ITEM PART NUMBER DESCRIPTION FT FT FT FT FT ASSEMBLY, BAT TUBE/REEL TINE (66") ASSEMBLY, BAT TUBE/REEL TINE (96") ASSEMBLY, BAT TUBE/REEL TINE (60") ASSEMBLY, BAT TUBE/REEL TINE (65") ASSEMBLY, BAT TUBE/REEL TINE (85 ) ASSEMBLY, BAT TUBE/REEL TINE (95") ASSEMBLY, BAT TUBE/REEL TINE (67") ASSEMBLY, BAT TUBE/REEL TINE (86") SHAFT, BAT SPLICE ASSEMBLY, LH END SHAFT PIVOT (INCLUDES ITEMS 6-8) WELDMENT, LH END SHAFT PIVOT TINE, PLASTIC REEL SCREW, X 2 FLAT HD, THD.FORM ASSEMBLY, RH END SHAFT PIVOT (INCLUDES ITEMS 10-12) WELDMENT, RH END SHAFT PIVOT TINE, PLASTIC REEL SCREW, X 2 FLAT HD, THD.FORM BOLT, 5/16" X 1-1/2" HHCS GR5 ZP NUT, 5/16" CENTERLOCK NC ZP Page 15

20 REEL BAT ASSEMBLY 30 & 35 HEADERS 11/07 Page 16

21 11/07 30 & 35 HEADERS REEL BAT ASSEMBLY ASSEMBLY, REEL BAT (30 FT. THRU 35 FT.) ITEM PART NUMBER DESCRIPTION FT ASSEMBLY, BAT TUBE/REEL TINE (85 ) ASSEMBLY, BAT TUBE/REEL TINE (100 ) ASSEMBLY, BAT TUBE/REEL TINE (86 ) ASSEMBLY, BAT TUBE/REEL TINE (100 ) SHAFT, BAT SPLICE SHAFT, BAT SPLICE WELDMENT, PIVOT STRAP/END SHAFT, LEFT HAND ASSEMBLY, LH END SHAFT PIVOT (INCLUDES ITEMS 5-7) WELDMENT, LH END SHAFT PIVOT TINE, PLASTIC REEL SCREW, X 2 FLAT HD,THD. FORM WELDMENT, PIVOT STRAP/END SHAFT, RIGHT HAND ASSEMBLY, RH END SHAFT PIVOT (INCLUDES ITEMS 9-11) WELDMENT, RH END SHAFT PIVOT TINE, PLASTIC REEL SCREW, X 2 FLAT HD,THD. FORM BOLT, 5/16" X 1-1/2" HHCS GR5 ZP NUT, 5/16" CENTERLOCK NC ZP FT. Page 17

22 BAT TUBE/REEL TINE ALL MODELS 11/07 Page 18

23 11/07 ALL MODELS BAT TUBE/REEL TINE ASSEMBLY, BAT TUBE/REEL TINE ITEM PART NUMBER DESCRIPTION TINE, PLASTIC REEL SCREW, X 2" FLAT HEAD THREAD FORM TUBE, REEL BAT (60 ) TUBE, REEL BAT (65 ) TUBE, REEL BAT (66 ) TUBE, REEL BAT (67 ) TUBE, REEL BAT ( TUBE, REEL BAT (86 ) TUBE, REEL BAT (95 ) TUBE, REEL BAT (96 ) TUBE, REEL BAT (100 ) 1 Page 19

24 ECCENTRIC ARM/HYD. MOTOR ALL MODELS 11/07 Page 20

25 11/07 ALL MODELS ECCENTRIC ARM/HYD. MOTOR ASSEMBLY, ECCENTRIC ARM & HYDRAULIC MOTOR ITEM PART NUMBER DESCRIPTION MOTOR, HYDRAULIC GEAR SAE 2 BOLT 8.0/8.9 CID KIT, MOTOR SEAL (ROSS/PARKER) (NOT SHOWN) KIT, SEAL (CHAR-LYNN) (NOT SHOWN) COUPLER, 1" HEX SHAFT BOLT, 1/2" X 1-1/2" HHCS GR5 ZP WASHER, 1/2" FLAT ZP NUT, 1/2" CENTERLOCK GRB ZP NUT, 5/16" NE NYLOCK ZP BOLT, 5/16" X 1-1/4" HHCS NC GR5 ZP BOLT, 1/2" X 2-1/2" HEX SOCKET B-HD CPS ADAPTER, -10MORING/-8MJIC 45 DEGREE BUSHING, PIVOT STRAP ASSEMBLY, ECCENTRIC ARM -6 BAT REEL (SEE PG 22-23) ASSEMBLY, BRACE CLAMP 2 SEAL KIT FOR CHARLYNN MOTORS SEAL KIT FOR CHARLYNN MOTORS ( 16516) ITEM PART NUMBER DESCRIPTION SEAL KIT FOR CHARLYNN MOTORS 1 DUST SEAL 1 BACK UP RING 1 PRESSURE SEAL (002, 003, 008, 009 MOTORS) 1 SEAL, FLANGE 1 SEAL, HOUSING PLUG (008 MOTORS) 1 SEAL, HOUSING PLUG (009 MOTORS) 1 SEAL 3 WASHER 7 LOCTITE CAPSULE 1 SEAL (O-RING PORT HOUSING) 2 O-RING (DRAIN PORT) 1 O-RING (HOUSING PLUG- END PORTED MODEL) 2 SEAL KIT FOR ROSS/PARKER MOTORS SEAL KIT FOR HYDRAULIC MOTOR ( 12050) ITEM PART NUMBER DESCRIPTION SEAL KIT, MOTOR 8.0 CID AIR REEL MOTOR (ROSS) 1 SEAL RINGS (PART NO ) 5 COMMUTATOR SEAL (PART NO ) 1 INNER SEAL (PART NO ) 1 BACK UP WASHER (PART NO ) 1 DIRT AND WATER SEAL (PART NO ) 1 GREASE PACK (PART NO ) 1 SERVICE MANUAL (PART NO ) 1 Page 21

26 ECCENTRIC ARM ASSEMBLY ALL MODELS 11/07 Page 22

27 11/07 ALL MODELS ECCENTRIC ARM ASSEMBLY ASSEMBLY, ECCENTRIC ARM ( 22347) ITEM PART NUMBER DESCRIPTION RING, ECCENTRIC FAR ARM, REEL/ECCENTRIC BOLT, 5/16" X 5/8" HHCS GR5 ZP NUT, 5/16" NE NYLOCK ZP BOLT, 5/16" X 1-3/4" HHCS GR5 ZP BOLT, 5/16" X 2-1/4" HCPS GR SHIELD, END-6 BAT WASHER, 5/16" FLAT ZP BOLT, 5/16" X 1" HHCS NC GR5 ZP KIT, BEARING W/CAP 6 A BASE, BEARING, PLASTIC 1 B CAP, BEARING, PLASTIC 1 C WASHER, 1/4" FLAT ZP 2 Page 23

28 REEL ARM MOUNT (MANUAL OEM FORE & AFT) CHALLENGER GLEANER 5, 7 & 8 SERIES GLEANER/MASSEY FERGUSON 8200 MASSEY FERGUSON 9850 (Left Hand) 11/07 (right hand) Page 24

29 11/07 CHALLENGER GLEANER 5, 7 & 8 SERIES GLEANER/MASSEY FERGUSON 8200 MASSEY FERGUSON 9850 reel arm mount (manual OEM fore & aft) REEL ARM MOUNT KIT (23635) ITEM PART NUMBER DESCRIPTION BOLT, 3/8 X 3 GR5 HEX CAPSCREW ZP NUT, 3/8 NYLOCK ZP REEL SUPPORT ASSY RH BOLT, CARR 3/8 X 1 GR5 NC ZP BOLT, 1/2 X 3 GR5 HEX HD ZP BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP BOLT, 1/2 X 4 HEX CPS G5 ZP ELECTRIC ACTUATOR BRACKET WLDMT. ADJUST. (AC&NH) REEL SUPPORT PAD-RH PIVOT CLAMP ASSEMBLY REEL SUPPORT PAD-LH CLAMP, HALF BUSHING REEL SUPPORT ASSY LH NUT, 1/2-13 UNC NYLOCK GUIDE, SADDLE 2 Page 25

30 REEL ARM MOUNt (electric OEM FORE & AFT) CHALLENGER GLEANER 5, 7 & 8 SERIES GLEANER/MASSEY FERGUSON 8200 MASSEY FERGUSON 9850 (Left Hand) 11/07 (right hand) Page 26

31 11/07 CHALLENGER GLEANER 5, 7 & 8 SERIES GLEANER/MASSEY FERGUSON 8200 MASSEY FERGUSON 9850 reel arm mount (electric OEM fore & aft) REEL ARM MOUNT KIT (23635) ITEM PART NUMBER DESCRIPTION BOLT, 1/2 X 4 GR5 HEX CAP G5 ZP NUT, 3/8 NE NYLOCK ZP CLAMP, HALF BOLT, CARR 3/8 X 1 GR5 NC ZP SPACER,.875 X.562 X.69 STL BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP NUT, 1/2-13 UNC NYLOCK ELECTRIC ACTUATOR PLATE, ACTUATOR ATTACH WASHER 1/2 SAE FLAT ZP PIVOT CLAMP ASSEMBLY GUIDE, SADDLE REEL SUPPORT ASSY RH REEL SUPPORT ASSY LH REEL SUPPORT PAD-LH REEL SUPPORT PAD-RH 1 Page 27

32 REEL ARM MOUNT GLEANER 2 & 3 SERIES 11/07 (LEFT HAND) (RIGHT HAND) Page 28

33 11/07 GLEANER 2 & 3 SERIES REEL ARM MOUNT REEL ARM MOUNT KIT ( 22257) ITEM PART NUMBER DESCRIPTION BOLT, 3/8 X 3 GR5 HEX CAPSCREW ZP NUT, 3/8 CENTERLOCK ZP REEL SUPPORT ASSY RH AC&NH BOLT, CARR 3/8 X 1 GR5 NC ZP BOLT, 1/2 X 3 GR5 HEX HD ZP BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP BOLT, 1/2 X 4 HEX CPS G5 ZP ELECTRIC ACTUATOR BRACKET WLDMT. ADJUST. (AC&NH) REEL SUPPORT PAD-RH PIVOT CLAMP ASSEMBLY REEL SUPPORT PAD-LH CLAMP, HALF BUSHING RELL SUPPORT ASSY LH AC&NH NUT, 1/2 CENTERLOCK GRB ZP GUIDE, SADDLE 2 Page 29

34 FAN HOSE ASSEMBLY ALL MODELS 11/07 FAN HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION T-BOLT CLAMP 8-11/ ELBOW, RUBBER - 8 X 45 DEG ELBOW SUPPORT BAND T-BOLT CLAMP 8-1/ FLEX HOSE X 8 LG HOSE CONNECTOR WELDMENT MNAIFOLD ELBOW - 8 (MR) BOLT, 5/16 X 1 GR5 HHCS NC ZP NUT, 5/16 SERR FLANGE NC ZP 2 Page 30

35 11/07 ALL MODELS SWITCH/MOUNT PLATE SWITCH/MOUNT PLATE ASSEMBLY ( 24333) ITEM PART NUMBER DESCRIPTION DECAL, ACTUATOR SWITCH ELECTRIC SWTICH ASSEMBLY - SPLIT 6 AMP ELECTRIC SWITCH ASSEMBLY - SPLIT 15 AMP PLATE, SWITCH MOUNT 1 Page 31

36 GEARBOX/FAN ALL MODELS PRE 08 FAN 11/07 Page 32

37 11/07 ALL MODELS PRE 08 FAN GEARBOX/FAN GEARBOX GEAR RATIO APPLICABLE MODELS 7.269:1 CHALLENGER, GLEANER, MASSEY FERGUSON 9750 & :1 MASSEY FERGUSON 2581, 9000 & 9700 GEARBOX/FAN ASSEMBLY ITEM PART NUMBER DESCRIPTION :1 ( 22757) GEARBOX, 7.269:1 (SEE PAGES 36-37) 1 GEAR RATIO GEARBOX, FAR 8.831:1 (SEE PAGES 36-37) HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) BOLT, 1/2 X 1-1/2 HEX HD NUT, 1/2 CENTERLOCK GRB ZP FAN RH SIDE W/ BUTTERFLY BOLT, 3/8 X 1 THREAD CUT WASHER, 7/8 SAE FLAT FAN ROTOR, 16.5 X 3 CW, 7/8 STL WASHER, 3/4 SAE FLAT NUT, HST SPINDLE CASTLE PIN, 5/32 X 1-1/4 COTTER FAN LH SIDE W/ BUTTERFLY BOLT, 3/8 NC X 1-1/4 HEX HD NUT, 3/8 SERR FLANGE BASE WELDMENT, BASE STRAP BEARING, 5/8 2-BOLT FLNG BOLT, 1/4 X 3/4 CRG WELDMENT, SCREEN/BLADE WASHER, 5/8 SAE FLAT WELDMENT, PIVOT WELDMENT, SCREEN CLEANER WELDMENT, SCREEN CAP NUT, 1/4 SERR FLANGE BOLT, 1/4 X 3/4 HEX HD SCREW, CO. 14C1/2 TAPPING HWH ZP KEYSTOCK, 3/ WELDMENT, ACTUATOR MOUNT WELDMENT, VALVE ACTUATOR WELDMENT, INDICATOR PLATE, LARGE BUTTERFLY BOLT, #10-24 X 1 IN. GR8 HCPS PLAIN NUT, #10X24 NYLOCK ACTUATOR, 2 STROKE WARNER BOLT, 1/4 X 1-1/2 HCS G5 ZP NUT, 1/4 CENTERLOCK WRAP, ROTARY SCREEN :1 ( 22759) Page 33

38 GEARBOX/FAN ALL MODELS 08 & LATER FAN 11/07 Page 34

39 11/07 ALL MODELS 08 & LATER FAN GEARBOX/FAN GEARBOX GEAR RATIO APPLICABLE MODELS 7.269:1 CHALLENGER, GLEANER, MASSEY FERGUSON 9750 & :1 MASSEY FERGUSON 2581, 9000 & 9700 GEARBOX/FAN ASSEMBLY ITEM PART NUMBER DESCRIPTION :1 ( 22757) GEARBOX, 7.269:1 (SEE PAGES 36-37) 1 GEAR RATIO GEARBOX, FAR 8.831:1 (SEE PAGES 36-37) HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) BOLT, 1/2 X 1-1/2 HEX HD NUT, 1/2 CENTERLOCK GRB ZP FAN RH SIDE W/ BUTTERFLY BOLT, 3/8 X 1 THREAD CUT WASHER, 7/8 SAE FLAT FAN ROTOR, 16.5 X 3 CW 7/8 STL WASHER, 3/4 SAE FLAT FAN LH SIDE W/ BUTTERFLY BOLT, 3/8 NC X 1-1/4 HEX HD NUT, 3/8 SERR FLANGE BASE KEYSTOCK, 3/ WELDMENT, ACTUATOR MOUNT WELDMENT, VALVE ACTUATOR WELDMENT, INDICATOR PLATE, LARGE BUTTERFLY BOLT, #10-24 X 1 IN. GR8 HCPS PLAIN NUT, #10 X 24 NYLOCK ACTUATOR, 2 STROKE WARNER BOLT, 1/4 X 1-1/2 HCS G5 ZP NUT, 1/4 CENTERLOCK WELDMENT, 8 ROTARY SCREEN BASE STRAP NUT, HST SPINDLE CASTLE PIN, 5/32 X 1-1/4 COTTER BEARING, 3/4 ROUND INSERT FLANGETTE, 47MM 2 HOLE WELDMENT, PIVOT WELDMENT, ROTARY SCREEN (8 -RH) BOLT, 5/16 X 3/4 CRG NUT, 5/16 SERR FLANGE NUT, 1/4 SERR FLANGE BOLT, 1/4 X 3/4 HEX HD WELDMENT, 8 FAN SCREEN CLEANER WELDMENT, 8 FAN ROTARY SCREEN CAP :1 ( 22759) Page 35

40 GEARBOX REPLACEMENT PARTS ALL MODELS 11/07 GEARBOX (REPLACEMENT PARTS) ITEM PART NUMBER DESCRIPTION 7.269:1 ( 22323) GEAR RATIO GEAR, SP BEV LH 19T NPN 66 GEAR, SP BEV RH 29T NPN 11 NUT, LOCK 3/4" NF :1 ( 22326) Page 36

41 11/07 ALL MODELS GEARBOX REPLACEMENT PARTS GEARBOX (REPLACEMENT PARTS) ITEM PART NUMBER DESCRIPTION 7.269:1 ( 22323) GEAR RATIO 4 NPN 66 SHIM,.002 RED NPN 66 SHIM,.005 BLUE NPN SPEC. HOUSING, SUB-ASSEMBLY NPN SPEC. HOUSING, PINION NPN SPEC. CAP, OPEN NPN SPEC. CAP, CLOSED SPEC. SLEEVE, INPUT SPEC. SHAFT, OUTPUT PINION NPN SPEC. GEAR INTG HEL LH 14T NPN SPEC. GEAR, HEL RH 81T NPN SPEC. SPACER NPN SPEC. SHIM,.002 RED NPN SPEC. SHIM,.005 BLUE NPN SPEC. SHIM,.002 RED NPN SPEC. SHIM,.005 BLUE BEARING, BALL 206NPP OR EQUIVALENT BEARING, X.465 CUP BEARING, CUP OR EQUIVALENT BEARING, X.660 CONE BEARING, CONE OR EQUIVALENT NPN SCREW, 3/8" X 1" NC HHCS GR :1 ( 22326) 25 NPN SCREW, 5/16" X 1" NC HHCS GR NPN SCREW, 3/8" X 1-1/4" NC HHCS GR NPN WASHER, 3/4" X 1-1/2" X 1/8" NPN WASHER, 1-17/64" X 1-3/4" X 1/8" NPN NUT, 3/8" NC HEX NPN KEY, 1/4" SQUARE X 15/16" P&W NPN KEY, 3/4" SQUARE X 1-1/2" SQUARE END NPN KEY, 1/4" X 1" WOODRUFF RING, RETAINING NPN RING, BEVELED RETAINING N NPN OIL, MOBILUBE SHC 75W NPN PLATE, NAME, CRARY NPN PAINT, FLAT BLACK NPN PLUG, PIPE SOCKET 1/4 NPT NPN PLUG, PIPE 1/2" O-RING BOSS NPN PLUG, VENTED 1/8 NPT, 1-5 PSI BALL SEAL, SHAFT SEAL, OIL NPN O-RING, NPN O-RING, NPN O-RING, NPN SCREW, 5/16" X 3/4" NC HHCS GR NPN TAG, LUBRICATION GEAROX SEAL AND SHIM KIT (NOT SHOWN) GEARBOX, REBUILT (22323/7.27:1) (NOT SHOWN) GEARBOX, REBUILT (22326/8.83:1) (NOT SHOWN) GEARBOX GEAR KIT (8.83:1) (NOT SHOWN) 1 Page 37

42 GEARBOX MOUNT/DRIVE KIT ALL MODELS 11/07 Page 38

43 11/07 ALL MODELS GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT/DRIVE KIT ( 22676) ITEM PART NUMBER DESCRIPTION BUSHING, 1-3/8 SD BOLT, 1/2 X 1 HEX HD BOLT, 1/2 X 1-1/4 SERR FLNG NUT, 1/2 CENTERLOCK GRB ZP WASHER, 1/2 FLAT ZP KEY, 5/16 X 1-3/4 SQUARE MOUNT PLATE SUPPORT (DAC) GEARBOX MOUNT PLATE (DAC) WELDMENT, SHIELD 2 Page 39

44 RIGHT HAND DRIVE KIT 18 GLEANER 2 & 3 SERIES 18 GLEANER 5, 7 & 8 SERIES 18 MASSEY FERGUSON /07 Page 40

45 11/07 18 GLEANER 2 & 3 SERIES 18 GLEANER 5, 7 & 8 SERIES 18 MASSEY FERGUSON 9850 RIGHT HAND DRIVE KIT RH DRIVE KIT ( 24060) ITEM PART NUMBER DESCRIPTION BOLT, 5/16 X 3/4 HEX HD BOLT, 3/8 X 1 HEX HD BOLT, 1/2 X 1-1/4 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERR FLG WASHER, 1/2 SAE FLAT WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE DRIVELINE/C FLANGE ASSEMBLY-S (SEE PAGES 50-51) SHAFT, GEARBOX DRIVE SHIELD, SLIP CLUTCH ASSEMBLY, SHIELD MOUNT PLATE BRACKET, DRIVELINE SUPPORT (GLEANER) NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 41

46 RIGHT HAND DRIVE KIT 20 CHALLENGER 20, 22 & 24 GLEANER 2 & 3 SERIES 20 & 22 GLEANER 5, 7 & 8 SERIES 20 GLEANER/MASSEY FERGUSON , 22 & 24 MASSEY FERGUSON /07 Page 42

47 11/07 20 CHALLENGER 20, 22 & 24 GLEANER 2 & 3 SERIES 20 & 22 GLEANER 5, 7 & 8 SERIES 20 GLEANER/MASSEY FERGUSON , 22 & 24 MASSEY FERGUSON 9850 RIGHT HAND DRIVE KIT RH DRIVE KIT ( 24061) ITEM PART NUMBER DESCRIPTION BOLT, 5/16 X 3/4 HEX HD BOLT, 3/8 X 1 HEX HD BOLT, 1/2 X 1-1/4 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERR FLG WASHER, 1/2 SAE FLAT WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE DRIVELINE/C FLANGE ASSEMBLY-L (SEE PAGES 50-51) SHAFT, GEARBOX DRIVE SHIELD, SLIP CLUTCH ASSEMBLY, SHIELD MOUNT PLATE BRACKET, DRIVELINE SUPPORT (GLEANER) NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 43

48 RIGHT HAND DRIVE KIT 25 CHALLENGER 25 GLEANER/MASSEY FERGUSON /07 Page 44

49 11/07 25 CHALLENGER 25 GLEANER/MASSEY FERGUSON 8200 RIGHT HAND DRIVE KIT RH DRIVE KIT ( 29984) ITEM PART NUMBER DESCRIPTION BOLT, 5/16 X 3/4 HEX HD BOLT, 3/8 X 1 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERR FLG WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE DRIVELINE/C ASSEMBLY - L (SEE PAGES 50-51) SHAFT, GEARBOX DRIVE SHIELD, SLIP CLUTCH ASSEMBLY, SHIELD MOUNT PLATE BRACKET, DRIVELINE SUPPORT (GLEANER) NUT, 5/16-18 TINNERMAN U-TYPE SHIELD, DRIVESHAFT BEARING MOUNT FLANGETTE, 72MS RND 3BIT ZP BOLT, 3/8 X 1 CARRIAGE GR5 NC ZP BEARING, 1-3/8 ROUND BORE 1 Page 45

50 RIGHT HAND DRIVE KIT 25 GLEANER 5, 7 & 8 SERIES 11/07 Page 46

51 11/07 25 GLEANER 5, 7 & 8 SERIES RIGHT HAND DRIVE KIT RH DRIVE KIT ( 24106) ITEM PART NUMBER DESCRIPTION BOLT, 5/16 X 3/4 HEX HD BOLT, 3/8 X 1 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERR FLG WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE DRIVELINE/C ASSEMBLY - L (SEE PAGES 50-51) SHAFT, GEARBOX DRIVE SHIELD, SLIP CLUTCH ASSEMBLY, SHIELD MOUNT PLATE BRACKET, DRIVELINE SUPPORT (GLEANER) NUT, 5/16-18 TINNERMAN U-TYPE SHIELD, DRIVESHAFT BEARING MOUNT FLANGETTE, 72MS RND 3BIT ZP BOLT, 3/8 X 1 CARRIAGE GR5 NC ZP BEARING, 1-3/8 ROUND BORE 1 Page 47

52 RIGHT HAND DRIVE KIT 30 & 35 CHALLENGER 30 GLEANER 2 & 3 SERIES 30 GLEANER 5, 7 & 8 SERIES 30 & 35 GLEANER/MASSEY FERGUSON MASSEY FERGUSON /07 Page 48

53 11/07 30 & 35 CHALLENGER 30 GLEANER 2 & 3 SERIES 30 GLEANER 5, 7 & 8 SERIES 30 & 35 GLEANER/MASSEY FERGUSON MASSEY FERGUSON 9850 RIGHT HAND DRIVE KIT RH DRIVE KIT ( 24062) ITEM PART NUMBER DESCRIPTION BOLT, 5/16 X 3/4 HEX HD BOLT, 3/8 X 1 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERR FLG WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE DRIVELINE/C ASSEMBLY - S (SEE PAGES 50-51) SHAFT, GEARBOX DRIVE SHIELD, SLIP CLUTCH ASSEMBLY, SHIELD MOUNT PLATE BRACKET, DRIVELINE SUPPORT (GLEANER) NUT, 5/16-18 TINNERMAN U-TYPE SHIELD, DRIVESHAFT BEARING MOUNT FLANGETTE, 72MS RND 3BIT ZP BOLT, 3/8 X 1 CARRIAGE GR5 NC ZP BEARING, 1-3/8 ROUND BORE 1 Page 49

54 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 11/07 Page 50

55 11/07 ALL MODELS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE/C-FLANGE ASSEMBLY ITEM PART NUMBER DESCRIPTION COUNTER FLANGE, 1-3/8", 21 SPLINE, W/QD SCREW, 3/8" X 1" SQUARE HEAD SET BOLT, 5/16" X 1" HHCS NC GR5 ZP SCREW, 3/8" X 3/4" SQUARE HEAD SET ZP NUT, 5/16" NE NYLOCK ZP HEADER DRIVELINE W/CLUTCH (S) HEADER DRIVELINE W/CLUTCH (L) WALTERSCHEID DRIVELINE SERVICE PARTS ITEM PART NUMBER DESCRIPTION KIT, CROSS AND BEARING W CHAIN, SHAFETY DECAL, OUT DECAL, IN YOKE, INBOARD 1B YOKE, INBOARD 2A CONE, 6 RIB SAFETY RING, SC25, BEARING YOKE, FLANGE CLUTCH, FRICTION A SPRING, BELVILLE (WALTERSCHEID) 1 1 B SET, FRICTION DISC (WALTERSCHEID) 1 1 C YOKE, FLANGE 1 1 D HUB, CLUTCH 1 1 E PLATE, THRUST 1 1 F NUT, M10 X 1.5 HEX NYLOCK TYP NE YZP 6 6 G BOLT, M10 X 1.5 X 50 CLASS 8.8 HCPS 6 6 H BOLT, M12 X 1.75 X 65 CLASS 8.8 HCPS 1 1 J NUT, M12 X 1.75 HEX NYLOCK TYPE NE YZP PROFILE, INNER 1B, (SHORT) PROFILE, INNER 1B, (LONG) PROFILE, OUTER 2A, (SHORT) PROFILE, OUTER 2A, (LONG) TUBE, INNER SHIELD, (SHORT) TUBE, INNER SHIELD, (LONG) TUBE, OUTER SHIELD, (SHORT) TUBE, OUTER SHIELD, (LONG) PIN, M10 X 80, SPRING Page 51

56 KIT, GEARBOX/FAN EXTENSION OPTIONAL: ALL MODELS 11/07 Page 52

57 11/07 OPTIONAL: ALL MODELS KIT, GEARBOX/FAN EXTENSION GEARBOX/FAN EXTENSION KIT ( 24493) ITEM PART NUMBER DESCRIPTION MM BEARING U-BOLT, FAN MOUNT 3/8 X 3 X 4 ZP BOLT, 3/8 X 1 GR5 HEX CAPSCREW ZP BOLT, 1/2 X 1 GR5 HEX CAPSCREW ZP BOLT, 1/2 X 1-1/2 GR5 HEX CAPSCREW ZP WASHER, 3/8 FLAT ZP NUT, 3/8 HEX NUT NC ZP NUT, 1/2 CENTER LOCKNUT ZP WASHER, 1/2 SAE FLAT ZP KEY, 3/16 SQ X 2 PLAIN SHAFT/COUPLER WELDMENT HUB, MACHINED EXTENSION PLATE, BEARING RETAINER BRACKET, EXTENSION SUPPORT - CASE IH (SHORT) BRACKET, EXTENSION SUPPORT - CASE IH (LONG) BRACKET, EXTENSION SUPPORT - JD/NH BRACKET, EXTENSION SUPPORT - GLEANER 1 Page 53

58 KIT, AUXILIARY REEL TINE OPTIONAL: ALL MODELS 11/07 (LEFT SIDE) (RIGHT SIDE) AUXILIARY REEL TINE KIT ( 25605) ITEM PART NUMBER DESCRIPTION WASHER, 3/8 FLAT ZP NUT, 3/8 CENTER LOCKNUT ZP BOLT, CRG 3/8 X 2-1/2 GR5 NC SP STL MCH BSH, 7/8 ID NAR-RIM 10GA RH AUX. REEL TINE ASSEMBLY (INCLUDES ITEMS 5-7) PIVOT STRAP/TUBE WELDMENT TINE, PLASTIC REEL SCREW, X 2 FLAT HD, THD. FORM LH AUX. REEL TINE ASSEMBLY (INCLUDES ITEMS 5-7) PIVOT STRAP/TUBE WELDMENT TINE, PLASTIC REEL SCREW, X 2 FLAT HD, THD. FORM 1 Page 54

59 11/07 ALL MODELS DECALS 1 2 THIS SIDE OF MANIFOLD IS TO BE TOWARD THE COMBINE. 237 NW 12 TH ST BOX 849 WEST FARGO, ND (701) P/N TM ITEM # PART # DESCRIPTION DECAL, CAUTION DECAL CTR MANIFOLD DIRECTION DECAL, WARNING AIR REEL STRIPING UAR DECAL, CRARY AIR REEL 1 Page 55

60 Page 56

61 Parts Catalog Air Reel PARTS INDEX Page 57

62 Part # Page(s) Part # Page(s) Part # Page(s) , , 5, 7, , 5, 7, , 5, 7, , , 17, 19, , , 5, , 7, , , , 43, 45, 47, , 43, 45, 47, 49, , 12, , , , , 33, 35, , , 5, 7, 9, 12, 13, 41, 43, 45, 47, 49, 53, , , 11, 12, 13, 29, , 29, 33, 35, 39, , 35, 41, 43, 45, 47, , , , 5, 7, 11, 25, 27, 29, 45, 47, , , , , , 27, Page , 41, 43, , , , 5, , 27, , 5, 7, , 15, , 30, , 13, 23, 41, 43, 45, 47, , 15, , , , 5, 7, 9, 10, 21, 23, , , 5, 7, 25, , , 43, 45, 47, , 5, 7, 9, , 41, 43, 45, 47, , , 17, 19, , 5, , 5, 7, , 47, , 47, , 5, 7, , , 5, , 5, , 5, , , 5, 7, , 27, , , , , , , , , , , , , , 35, , 35, , , , 5, , 5, , 27, , , , , 27, , 27, , 27

63 Part # Page(s) Part # Page(s) , , , , , 49, , 45, 47, , , 43, 45, 47, , 43, 45, 47, , 43, 45, 47, , , , 5, , , , , , , , , 17, , , 5, , , , , , 5, , 5, , 47, , , , , , , , 35 Page 59

64 237 12TH ST. NW P.O. BOX 849 WEST FARGO, ND PH: FAX: (701) Manufactured in the United States of America by Crary Industries