PARTS MANUAL NEW HOLLAND

Transcription

1 PARTS MANUAL NEW HOLLAND 90-9 C/C 0 CASE IH Manual P/N 08 Rev. 0 Companion to P/N 00 SN Range: B000-C08

2 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER INTERNET Crary Industries, Inc. th St. NW West Fargo, ND 808 Monday-Friday 8 am-pm (CST) Parts and Service Ph: Fax: service@crary.com sales@crary.com Online: PLEASE SEND US YOUR WARRANTY CARD Please take time to fi ll in the information requested on the card. When you send in the completed card to us, we register your Air Reel and start coverage under our limited warranty. Two serial number stickers are included with each Air Reel. The decals are located on the Air Reel manifold. One sticker is to be placed on the warranty registration card and mailed back to Crary Industries. The second sticker is to be placed in the owners manual for future reference.

3 PARTS ORDERING INFORMATION For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Air Reel to provide the most effi cient service. See below for information on how to identify and record the serial number for your Air Reel. ILLUSTRATION AND TEXT The arrangement of this parts catalog is for easy identifi cation of the Air Reel parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information (text) on the right. Except for some common hardware, all parts are identifi ed with an item number which corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the Air Reel. Crary replacement parts are available from your Crary Dealer. To obtain prompt, effi cient service, remember to give the dealer the correct part description and serial number of the Air Reel. When ordering parts for your unit provide the following:. The SERIAL NUMBER of your Air Reel.. The PART NUMBER of the part.. The PART DESCRIPTION.. The QUANTITY needed. WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fi t on this unit. SERIAL NUMBER LOCATION Always give your authorized Crary dealer the serial number of your Air Reel when ordering parts, requesting service, or any other information. Please record the serial number in the space provided below and on the warranty and registration card. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA 808 U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Figure, Serial # decal Figure, Serial number location Page iii

4 SECTION Contents PAGE AIR MANIFOLD... BAT TUBE/REEL TINE... 8 DECALS... DRIVELINE/C FLANGE ASSEMBLY... ECCENTRIC ARM ASSEMBLY... ECCENTRIC ARM & HYD. MOTOR... 0 ECCENTRIC MOUNT PLATE/ROLLER... FAN HOSE ASSEMBLY... GEARBOX/FAN... 0 GEARBOX MOUNT/DRIVE KIT... GEARBOX REPLACEMENT PARTS... IDLER GEAR AND AIR TUBE... 8 REEL ARM MOUNT KIT... REEL BAT ARM... 0 REEL BAT ASSEMBLY... REEL BAT/ECCENTRIC MOUNT... SWITCH/MOUNT PLATE... OPTIONS... 9 KIT, AUXILIARY REEL TINE... KIT, GEARBOX/FAN EXTENSION... 0 KIT, NEUTRAL DRIVE SHAFT... STATIC PRESSURE GAGE... PARTS INDEX... Page iv

5 Parts Catalog Air Reel New Holland Headers 9, 9, C, C, 0 Case IH Headers 00, 00 Page

6 AIR MANIFOLD 8 & 0 HEADERS 0/ J I E C A H G F D B Page

7 0/ 8 & 0 HEADERS AIR MANIFOLD ITEM PART NUMBER ASSEMBLY, AIR MANIFOLD DESCRIPTION 9 8 FT. 0 WASHER, /8 FLAT ZP 0 BOLT, /8 X CRG GR NC ZP SCREW, / X /8 HWH AB THREAD ZP 88 NUT, /8 NE NYLOCK ZP 8 BOLT, /8 X -/ CRG GR NC ZP 0 PILLOWBLOCK, STAMPED STEEL 0 BEARING, " HEX INSERT 8 COLLAR, SET " HEX 8 SHIELD, DRIVE SHAFT (.") 9 8 SHIELD, DRIVE SHAFT (9.0") 0 9 SHIELD, DRIVE SHAFT (.") 8 SHIELD, DRIVE SHAFT (.00") 88 SHIELD, DRIVE SHAFT (8.0") WELDMENT, IDLER MT. CLAMP (RH) WELDMENT, IDLER MT. CLAMP (LH) 90- WELDMENT, RH END CLAMP (W/MOTOR MT.) 9- WELDMENT, LH END CLAMP (W/MOTOR MT.) -00 SHAFT, REEL DRIVE (0.") -00 SHAFT, REEL DRIVE (.") 0-00 ASSEMBLY, HUB/PINION GEAR (INCLUDES A-F) A 8-00 HUB, PINION GEAR B BOLT, / X -/ HEX HD GR ZP C NUT, / NE NYLOCK ZP D BOLT, / X -/ HHCS GR NC ZP E 0 IDLER GEAR,. BORE F 8- RING, PINION RETAINER ASSY', 8 FT. MANIFOLD (INCLUDES G-J) 0-00 ASSY', 0 FT. MANIFOLD (INCLUDES G-J) G 00 DECAL, CAUTION H 00 DECAL, WARNING I 0 DECAL, CRARY AIR REEL J DECAL, CENTER MANIFOLD DIRECTION 9 0 FT. Page

8 AIR MANIFOLD - HEADERS 0/ J 8 I H F E D C B A G 9 Page

9 0/ - HEADERS AIR MANIFOLD ITEM PART NUMBER ASSEMBLY, AIR MANIFOLD DESCRIPTION 98 FT. 00 FT. 0 FT. -S 0-00 COUPLER, " HEX SHAFT 0 WASHER, /8 FLAT ZP 0 BOLT, /8 X CRG GR NC ZP SCREW, / X /8 HWH AB THREAD ZP NUT, / NE NYLOCK ZP 88 NUT, /8 NE NYLOCK ZP BOLT, / X -/ HHCS GR NC ZP 8 8 BOLT, /8 X -/ CRG GR NC ZP 9 0 PILLOWBLOCK, STAMPED STEEL 0 0 BEARING, " HEX INSERT COLLAR, SET " HEX 8 SHIELD, DRIVE SHAFT (.") 8 SHIELD, DRIVE SHAFT (9.8") 9 SHIELD, DRIVE SHAFT (89.0") 89 SHIELD, DRIVE SHAFT (9.00") 9 SHIELD, DRIVE SHAFT (.") 8 SHIELD, DRIVE SHAFT (.00") 9-00 SHIELD, DRIVE SHAFT (8.") 8-00 SHIELD, DRIVE SHAFT (8.00") 9-00 SHIELD, DRIVE SHAFT (8.") WELDMENT, IDLER MT. CLAMP (RH) WELDMENT, IDLER MT. CLAMP (LH) WELDMENT, RH END CLAMP (W/MOTOR MT.) 9 9- WELDMENT, LH END CLAMP (W/MOTOR MT.) 0-00 SHAFT, REEL DRIVE (9.") -00 SHAFT, REEL DRIVE (.") -00 SHAFT, REEL DRIVE (.") -00 SHAFT, REEL DRIVE (.0") 0-00 ASSEMBLY, HUB/PINION GEAR A 8-00 HUB, PINION GEAR B BOLT, / X -/ HEX HD GR ZP C NUT, / NE NYLOCK ZP D BOLT, / X -/ HHCS GR NC ZP E 0 IDLER GEAR,. BORE F 8- RING, PINION RETAINER 0-00 ASSY', FT. MANIFOLD ASSY', FT. MANIFOLD ASSY', FT. MANIFOLD - SHORT G 00 DECAL, CAUTION H 00 DECAL, WARNING I 0 DECAL, CRARY AIR REEL J DECAL, CENTER MANIFOLD DIRECTION Page

10 AIR MANIFOLD 0 & HEADERS 0/ I J E C A 8 H G F D B 9 Page

11 0/ 0 & HEADERS AIR MANIFOLD ITEM PART NUMBER ASSEMBLY, AIR MANIFOLD DESCRIPTION 0 0 FT. -00 FT COUPLER, " HEX SHAFT 0 WASHER, /8 FLAT ZP 0 BOLT, /8 X CRG GR NC ZP SCREW, / X /8 HWH AB THREAD ZP NUT, / NE NYLOCK ZP 88 NUT, /8 NE NYLOCK ZP 9 9 BOLT, / X -/ HHCS GR NC ZP 8 8 BOLT, /8 X -/ CRG GR NC ZP 9 0 PILLOWBLOCK, STAMPED STEEL 0 0 BEARING, " HEX INSERT COLLAR, SET " HEX 8 SHIELD, DRIVE SHAFT (.00") 8-00 SHIELD, DRIVE SHAFT (8.00") 88 SHIELD, DRIVE SHAFT (8.0") -00 SHIELD, DRIVE SHAFT (9.") 89 SHIELD, DRIVE SHAFT (9.00") -00 SHIELD, DRIVE SHAFT (9.") 9 SHIELD, DRIVE SHAFT (.") -00 SHIELD, DRIVE SHAFT (9.") WELDMENT, IDLER MT. CLAMP (RH) WELDMENT, IDLER MT. CLAMP (LH) WELDMENT, RH END CLAMP (W/MOTOR MT.) 9 9- WELDMENT, LH END CLAMP (W/MOTOR MT.) 0-00 SHAFT, REEL DRIVE (9.") 0-00 SHAFT, REEL DRIVE (0.") -00 SHAFT, REEL DRIVE (.9") -00 SHIELD, DRIVE SHAFT(.9") 9 SHIELD, DRIVE SHAFT(.") 0-00 ASSEMBLY, HUB/PINION GEAR A 8-00 HUB, PINION GEAR B BOLT, / X -/ HEX HD GR ZP C NUT, / NE NYLOCK ZP D BOLT, / X -/ HHCS GR NC ZP E 0 IDLER GEAR,. BORE F 8- RING, PINION RETAINER 0-00 ASSY', 0 FT. MANIFOLD - SHORT 0-00 ASSY', FT. MANIFOLD - LONG G 00 DECAL, CAUTION H 00 DECAL, WARNING I 0 DECAL, CRARY AIR REEL J DECAL, CENTER MANIFOLD DIRECTION Page

12 IDLER GEAR AND AIR TUBE ALL MODELS 0/ Page 8

13 0/ ALL MODELS IDLER GEAR AND AIR TUBE ITEM PART NUMBER ASSEMBLY, IDLER GEAR AND AIR TUBE DESCRIPTION 8 FT. 0 FT. 0 WASHER, /8" FLAT ZP 008 BOLT, /8" X " HHCS GR ZP NUT, /8" CENTERLOCK ZP ASSEMBLY, IDLER GEAR (INCLUDES ITEMS -0) GEAR, IDLER,." BORE 9 BEARING, RADIAL MM - RING, PINION RETAINER 8 0 ADAPTOR, SHOULDER BORE 9 BOLT, /" X -/ GR HHCS NC ZP 0 NUT, /" NE NYLOCK ZP ASSEMBLY, REEL BAT ARM, BAT SEAL, FOAM, AIR TUBE 0 WELDMENT, AIR TUBE 8 0 ASSEMBLY, DOUBLE AIR TUBE WELDMENT SCREW, /" X /8" HWH AB THREAD ZP 0 9 FT. ITEM PART NUMBER ASSEMBLY, IDLER GEAR AND AIR TUBE DESCRIPTION FT. FT. 0 FT. 0 WASHER, /8" FLAT ZP BOLT, /8" X " HHCS GR ZP NUT, /8" CENTERLOCK ZP ASSEMBLY, IDLER GEAR (INCLUDES ITEMS -0) GEAR, IDLER,." BORE 9 BEARING, RADIAL MM - RING, PINION RETAINER 8 0 ADAPTOR, SHOULDER BORE 9 BOLT, /" X -/ GR HHCS NC ZP 0 NUT, /" NE NYLOCK ZP ASSEMBLY, REEL BAT ARM, BAT SEAL, FOAM, AIR TUBE 8 9 WELDMENT, AIR TUBE 0 0 ASSEMBLY, DOUBLE AIR TUBE WELDMENT SCREW, /" X /8" HWH AB THREAD ZP FT. Page 9

14 REEL BAT ARM ALL MODELS 0/ REEL BAT ARM ASSEMBLY ( ) ITEM PART NUMBER DESCRIPTION 09 BEARING W/CAP (INCLUDES ITEMS -) 8 BEARING CAP, PLASTIC 0 BEARING BASE, PLASTIC 00 WASHER, / FLAT ZP 0 BOLT, / X GR HCS ZP 8 NUT, / CENTERLOCK NC ZP 8 BOLT, / X -/ GR HEX CPS ZP 8 NUT, / NE NYLOCK ZP BOLT, / X /8 NC HHCS GR ZP 8 0 SECTION, INTERNAL GEAR 8 0- REEL ECCENTRIC ARM Page 0

15 0/ ALL MODELS REEL BAT/ECCENTRIC MOUNT ITEM PART NUMBER ASSEMBLY, BAT & ECCENTRIC MOUNT DESCRIPTION 99 ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER, RIGHT HAND (SEE PAGE ) 90 ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER, LEFT HAND (NOT SHOWN) (SEE PAGE ) 0 BOLT, /8" X " CARRIAGE NC GR ZP 0 WASHER, /8" SAE FLAT ZP 0 NUT, /8" CENTERLOCK ZP Page

16 ECCENTRIC MOUNT PLATE/ROLLER ALL MODELS 0/ 8 ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER (LEFT HAND) ( 90) ITEM PART NUMBER DESCRIPTION 90- PLATE, ECCENTRIC ROLLER MOUNT 0 WASHER, /8" FLAT ZP 0 NUT, /8" CENTERLOCK ZP 0 WASHER, /" FLAT ZP 9 88 BUSHING, ROLLER 9 BEARING, RADIAL 9 ROLLER, PLASTIC, " SM, VIRGIN UHMW BOLT, /8 NC X -/ GR HEX ZP Page

17 0/ ALL MODELS ECCENTRIC MOUNT PLATE/ROLLER 8 ASSEMBLY, ECCENTRIC MOUNT PLATE/ROLLER (RIGHT HAND) ( 99) ITEM PART NUMBER DESCRIPTION 90- PLATE, ECCENTRIC ROLLER MOUNT 0 WASHER, /8" FLAT ZP 0 NUT, /8" CENTERLOCK ZP 0 WASHER, /" FLAT ZP 9 88 BUSHING, ROLLER 9 BEARING, RADIAL 9 ROLLER, PLASTIC, /8" SM, VIRGIN UHMW BOLT, /8 NC X -/ GR HEX ZP Page

18 REEL BAT ASSEMBLY 8 - HEADERS 0/ 8 Page

19 0/ 8 - HEADERS REEL BAT ASSEMBLY ITEM PART NUMBER DESCRIPTION KIT, REEL BAT (8 - ) RH 8 FT. 0 FT. FT. LH RH LH RH 8 NUT, / CENTERLOCK 8 BOLT, / X -/ HEX -00 SHAFT, BAT SPLICE -00 ASSY, RH BAT TUBE/REEL TINE (8 ) -00 ASSY, LH BAT TUBE/REEL TINE (8 ) 0-00 ASSY, RH BAT TUBE/REEL TINE (8 ) -00 ASSY, LH BAT TUBE/REEL TINE (8 ) -00 ASSY, RH BAT TUBE/REEL TINE (0 ) -00 ASSY, LH BAT TUBE/REEL TINE (0 ) 8-00 ASSY, RH BAT TUBE/REEL TINE ( ) 9-00 ASSY, LH BAT TUBE/REEL TINE ( ) 0-00 ASSY, RH BAT TUBE/REEL TINE ( ) -00 ASSY, LH BAT TUBE/REEL TINE ( ) -00 ASSY, RH BAT TUBE/REEL TINE (9 ) -00 ASSY, LH BAT TUBE/REEL TINE (9 ) 8-00 ASSY, RH END SHAFT PIVOT ASSY, LH END SHAFT PIVOT LH ITEM PART NUMBER KIT, REEL BAT ( FT. & FT.) DESCRIPTION RH 0 FT. FT. LH RH 89 8 NUT, / CENTERLOCK 8 BOLT, / X -/ HEX -00 SHAFT, BAT SPLICE 0-00 ASSY, RH BAT TUBE/REEL TINE (8 ) -00 ASSY, LH BAT TUBE/REEL TINE (8 ) -00 ASSY, RH BAT TUBE/REEL TINE (9 ) -00 ASSY, LH BAT TUBE/REEL TINE (9 ) 8-00 ASSY, RH BAT TUBE/REEL TINE (8 ) 9-00 ASSY, LH BAT TUBE/REEL TIINE (8 ) -00 ASSY, RH BAT TUBE/REEL TINE (9 ) -00 ASSY, LH BAT TUBE/REEL TINE (9 ) -00 ASSY, RH BAT TUBE/REEL TINE (9 ) -00 ASSY, LH BAT TUBE/REEL TINE (9 ) 8-00 ASSY, RH END SHAFT PIVOT ASSY, LH END SHAFT PIVOT LH 90 Page

20 REEL BAT ASSEMBLY 0 & HEADERS 0/ 8 Page

21 0/ 0 & HEADERS REEL BAT ASSEMBLY ITEM PART NUMBER DESCRIPTION KIT, REEL BAT (0 - ) RH 9 0 FT. FT. LH 9 RH 9 8 NUT, / CENTERLOCK 8 BOLT, / X -/ HEX -00 SHAFT, BAT SPLICE 0-00 ASSY, RH BAT TUBE/REEL TINE (8 ) -00 ASSY, LH BAT TUBE/REEL TINE (8 ) 0-00 ASSY, RH BAT TUBE/REEL TINE (0 ) -00 ASSY, LH BAT TUBE/REEL TINE (0 ) -00 ASSY, RH BAT TUBE/REEL TINE ( ) -00 ASSY, LH BAT TUBE/REEL TINE ( ) 0-00 ASSY, RH BAT TUBE/REEL TINE (0 ) -00 ASSY, LH BAT TUBE/REEL TINE (0 ) -00 ASSY, RH BAT TUBE/REEL TINE (9 ) -00 ASSY, LH BAT TUBE/REEL TINE (9 ) 0-00 ASSY, RH BAT TUBE/REEL TINE (0 ) -00 ASSY, LH BAT TUBE/REEL TINE (0 ) 8-00 ASSY, RH END SHAFT PIVOT ASSY, LH END SHAFT PIVOT LH 98 Page

22 BAT TUBE/REEL TINE ALL MODELS 0/ LEFT HAND RIGHT HAND Page 8

23 0/ ALL MODELS BAT TUBE/REEL TINE ITEM PART NUMBER DESCRIPTION ASSEMBLY, BAT TUBE/REEL TINE RH LH 8-00 RH 9-00 LH 0-00 RH -00 LH RH 9 TINE, PLASTIC REEL LH 9 SCREW, - X " FLAT HEAD THREAD FORM TUBE, REEL BAT (0 ) - TUBE, REEL BAT ( ) - TUBE, REEL BAT ( ) - TUBE, REEL BAT (8 ) ITEM PART NUMBER DESCRIPTION ASSEMBLY, BAT TUBE/REEL TINE -00 RH -00 LH RH LH RH LH RH 9 TINE, PLASTIC REEL LH 9 SCREW, - X " FLAT HEAD THREAD FORM - TUBE, REEL BAT ( ) - TUBE, REEL BAT (8 ) - TUBE, REEL BAT (8 ) 8- TUBE, REEL BAT (9 ) ITEM PART NUMBER DESCRIPTION ASSEMBLY, BAT TUBE/REEL TINE RH LH RH LH RH 9 TINE, PLASTIC REEL LH 9 SCREW, - X " FLAT HEAD THREAD FORM 9- TUBE, REEL BAT (9 ) 0- TUBE, REEL BAT (9 ) - TUBE, REEL BAT (0 ) Page 9

24 ECCENTRIC ARM & HYD. MOTOR ALL MODELS 0/ Page 0

25 0/ ALL MODELS ECCENTRIC ARM & HYD. MOTOR ECCENTRIC ARM AND HYDRAULIC MOTOR ITEM PART NUMBER DESCRIPTION 9 MOTOR, HYDRAULIC GEAR SAE A BLT/8.0 CID 0 BOLT, / X -/ GR HEX CAPSW ZP 0 WASHER, / FLAT ZP 09 NUT, / CENTER LOCKNUT ZP 8 NUT, / NYLOCK BOLT, / X - HEX BOLT, / X -/ HEX SKT B-HD CPS 8 0 ADAPTER, -0M O-RING/-0MJIC DEG 9 09 T-BOLT CLAMP 8-/ 0 0 PIVOT STRAP BUSHING 9 TUBE CAP - 8 (NOTCHED) ASSEMBLY, ECCENTRIC ARM - BAT REEL (SEE PAGES -) 89 ASSEMBLY, BRACE CLAMP (INCLUDES ITEMS BELOW) 08 BOLT, /8 X -/ CARRIAGE NC GR ZP 88 NUT, /8 NE NYLOCK ZP CLAMP, BRACE (ROLLED) 0-00 COUPLER, HEX SHAFT SEAL KIT FOR CHARLYNN MOTORS SEAL KIT FOR CHARLYNN MOTORS ( ) ITEM PART NUMBER DESCRIPTION SEAL KIT FOR CHARLYNN MOTORS DUST SEAL BACK UP RING PRESSURE SEAL (00, 00, 008, 009 MOTORS) SEAL, FLANGE SEAL, HOUSING PLUG (008 MOTORS) SEAL, HOUSING PLUG (009 MOTORS) SEAL WASHER LOCTITE CAPSULE SEAL (O-RING PORT HOUSING) O-RING (DRAIN PORT) O-RING (HOUSING PLUG- END PORTED MODEL) SEAL KIT FOR ROSS/PARKER MOTORS SEAL KIT FOR HYDRAULIC MOTOR ( 00) ITEM PART NUMBER DESCRIPTION 00 SEAL KIT, MOTOR 8.0 CID AIR REEL MOTOR (ROSS) SEAL RINGS (PART NO. 08) COMMUTATOR SEAL (PART NO. 0) INNER SEAL (PART NO. 0) BACK UP WASHER (PART NO. 08) DIRT AND WATER SEAL (PART NO. 80) GREASE PACK (PART NO. 008) SERVICE MANUAL (PART NO. 000) Page

26 ECCENTRIC ARM ASSEMBLY ALL MODELS 0/ B 0 A C 8 9 Page

27 0/ ALL MODELS ECCENTRIC ARM ASSEMBLY ASSEMBLY, ECCENTRIC ARM ( ) ITEM PART NUMBER DESCRIPTION 9 RING, ECCENTRIC FAR 0- ARM, REEL/ECCENTRIC 00 BOLT, /" X /8" HHCS GR ZP NUT, /" NE NYLOCK ZP 8 0 BOLT, /" X -/" HHCS GR ZP -00 BOLT, /" X -/" HCPS GR 8- SHIELD, END- BAT 8 0 WASHER, /" FLAT ZP 9 9 BOLT, /" X " HHCS NC GR ZP 0 09 KIT, BEARING W/CAP (INCLUDES ITEMS A-C) A 0 BASE, BEARING, PLASTIC B 8 CAP, BEARING, PLASTIC C 00 WASHER, /" FLAT ZP Page

28 REEL ARM MOUNT KIT MANUAL FORE AND AFT 0/ (LEFT HAND) A 0 9 (RIGHT HAND) A 8 9 Page

29 0/ MANUAL FORE AND AFT REEL ARM MOUNT KIT REEL ARM MOUNT KIT, MANUAL FORE & AFT PARTS ( 900) ITEM PART NUMBER DESCRIPTION 009 BOLT, /8 X HEX HD GR ZP 0 NUT, /8 CENTERLOCK ZP 0 09 NUT, / CENTERLOCK GRB ZP 0 BOLT, /8 X CRG GR NC ZP 8 08 BOLT, / X HEX HD GR ZP 09 BOLT, / X -/ HEX HD GR ZP BOLT, / X HEX HD GR ZP 8 8 ELECTRIC ACTUATOR 9 8 WELDMENT, ADJUST. BRACKET (AC+NH) PAD, REEL SUPPORT (") PAD, REEL SUPPORT (-/8") 9 ASSY', PIVOT CLAMP 0- CLAMP, HALF 90 ASSY', REEL SUPPORT - LH (NH) A 809 GUIDE, SADDLE 90 ASSY', REEL SUPPORT - RH (NH) A 809 GUIDE, SADDLE 8 BUSHING Page

30 REEL ARM MOUNT KIT HYDRAULIC FORE AND AFT 0/ (LEFT HAND) A 9 (RIGHT HAND) A 8 0 Page

31 0/ HYDRAULIC FORE AND AFT REEL ARM MOUNT KIT REEL ARM MOUNT KIT, HYDRAULIC FORE & AFT PARTS ( 900) ITEM PART NUMBER DESCRIPTION 009 BOLT, /8 X HEX HD GR ZP 0 NUT, /8 CENTERLOCK ZP 0 09 NUT, / CENTERLOCK GRB ZP 0 BOLT, /8 X CRG GR NC ZP 8 09 BOLT, / X -/ HEX HD GR ZP PIN, /8 X.00 ZP COTTER CLEVIS PIN, /8 X LONG 8 8 ELECTRIC ACTUATOR PAD, REEL SUPPORT (") PAD, REEL SUPPORT (-/8") 9 ASSY', PIVOT CLAMP 0- CLAMP, HALF 90 ASSY', REEL SUPPORT - LH (NH) A 809 GUIDE, SADDLE 90 ASSY', REEL SUPPORT - RH (NH) A 809 GUIDE, SADDLE 8 BUSHING Page

32 REEL ARM MOUNT KIT, RH NH 0 & CIH 00 0/ 8 A Page 8

33 0/ NH 0 & CIH 00 REEL ARM MOUNT KIT, RH KIT, RH REEL ARM MOUNT - CIH 00/NH 0 ( ) ITEM PART NUMBER DESCRIPTION 00 BOLT, /8 X HEX HD GR ZP 008 BOLT, /8 X HEX HD GR ZP 009 BOLT, /8 X HEX HD GR ZP 0 BOLT, /8 X CRG GR NC ZP 08 BOLT, / X HEX HD GR ZP 0 BOLT, / X CRG GR ZP NUT, / NE NYLOCK ZP 8 88 NUT, /8 NE NYLOCK ZP 9 NUT, / SERR FLANGE NC ZP 0 0 ADAPTER, -0 MORING / -8 MJIC DEG. 09 T-BOLT CLAMP 8-/8" 0- CLAMP, HALF 0-00 HOSE,.00 X.00" -8 FMJICSW / -0 FMFFORSW BOLT, / X -/ HCPS GR ZP NUT, / CENTERLOCK ZP 80- WASHER, SPACER (.0 X. X.) ASSEMBLY, REEL MOUNT (RH) A 809 GUIDE, SADDLE WELDMENT, CYLINDER MOUNT PLATE, SENSOR MOUNT PAD, REEL SUPPORT -/" - WELDMENT, TUBE MOUNT 0 FLEX HOSE, 8" ID X FT. (NOT SHOWN) Page 9

34 REEL ARM MOUNT KIT, LH NH 0 & CIH 00 0/ 8 A Page 0

35 0/ NH 0 & CIH 00 REEL ARM MOUNT KIT, LH KIT, LH REEL ARM MOUNT - CIH 00/NH 0 ( ) ITEM PART NUMBER DESCRIPTION NUT, /- UNC NYLOCK BOLT, / X -/ HEX HD GR ZP BOLT, / X -/ HEX HD GR ZP 00 BOLT, /8 X HEX HD GR ZP 008 BOLT, /8 X HEX HD GR ZP 009 BOLT, /8 X HEX HD GR ZP 0 BOLT, /8 X CRG GR NC ZP 8 08 BOLT, / X HEX HD GR ZP 9 0 WASHER, /8 SAE FLAT ZP 0 BOLT, /8 X -/ HEX HD GR ZP 88 NUT, /8 NE NYLOCK ZP NUT, / SERR FLANGE NC ZP 8 ELECTRIC ACTUATOR 9 ASSEMBLY, PIVOT CLAMP 0- CLAMP, HALF BOLT, / X -/ HCPS GR ZP NUT, / CENTERLOCK ZP WASHER, SPACER (.0 X. X.) WELDMENT, CYLINDER MOUNT PLATE, SENSOR MOUNT 0- PLATE, SENSOR LINK 0-00 ASSEMBLY, REEL MOUNT (LH) A 809 GUIDE, SADDLE 0-00 PAD, REEL SUPPORT -/" - WELDMENT, SENSOR MOUNT Page

36 FAN HOSE ASSEMBLY NH 90-9, C/C & CIH 00 0/ FAN HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION ELBOW, RUBBER -8 X DEG. MANIFOLD, ELBOW DEG TUBE MOUNT WELDMENT FLEX HOSE, 8 ID X 8FT. 8- MANIFOLD, HEADER/END BAND, ELBOW SUPPORT 09 CLAMP, 8-/ T-BOLT 8 09 CLAMP, 8-/8 T-BOLT 9 9 BOLT, / X GR HHCS NC ZP 0 NUT, / NE NYLOCK ZP 0 WASHER, / FLAT ZP Page

37 0/ NH 0 & CIH 00 FAN HOSE ASSEMBLY NH 0 & CIH 00 HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION ELBOW, RUBBER 8" X DEG. 009 BOLT, /8 X HEX HD GR ZP 88 NUT, /8 NE NYLOCK ZP 09 CLAMP, 8-/8" T-BOLT 09 CLAMP, 8-/" T-BOLT 0 FLEX HOSE, 8"ID X FT. MANIFOLD ELBOW 8" (MR) 8 FLEX HOSE, 8"ID X 8FT. 9 BAND, ELBOW SUPPORT PLATE, SENSOR MOUNT - WELDMENT, TUBE MOUNT Page

38 GEARBOX MOUNT/DRIVE KIT NH HEADERS (S/N 0-CURRENT) 0 HEADERS (S/N 0-090) 0/ GEARBOX MOUNT DRIVE KIT ( ) ITEM PART NUMBER DESCRIPTION BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP (NOT SHOWN) BOLT, / X -/ SERR FLG 09 NUT, / CENTERLOCK ZP 0 WASHER, / FLAT ZP 8 8 BOLT, / X -/ GR HEX CPS ZP 98 KEY, / X -/ SQUARE 9 SHIELD WELDMENT 8 0- SPACER SUPPORT, MOUNT PLATE 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page

39 0/ NH HEADERS (S/N 090-CURRENT) GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT KIT ( 980) ITEM PART NUMBER DESCRIPTION 980- BRACKET, GEARBOX MT. (NH 90 S) BOLT, / X -/ SERR FLG HINGE, SHIELD 98- WELDMENT, GBOX DRIVE RH SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD 90 BOLT, / NC X -/ GR HCS ZP NUT, / NE NYLOCK ZP 8 0 BOLT, / X GR HEX CPSCREW ZP LATCH, FLEXIBLE DRAW 0 SCW, MCH 0- X / PAN HD, PH ZP BOLT, 0- X / HHCS GR8 PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP 8 0 WASHER, / FLAT ZP 8 09 NUT, / CENTERLOCK GRB ZP 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page

40 GEARBOX MOUNT/DRIVE KIT NH C/C & CIH 00 0 HEADERS (S/N 0-CURRENT) - HEADERS (S/N 0-090) 0/ GEARBOX MOUNT DRIVE KIT ( 8) ITEM PART NUMBER DESCRIPTION BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP (NOT SHOWN) BOLT, / X -/ SERR FLG 0 09 NUT, / CENTER LOCKNUT ZP 0 WASHER, / FLAT ZP 0 BOLT, / X G HCS - ZP 8 BOLT, / X -/ GR HEX CPS ZP 98 KEY, / X -/ SQUARE 8 9 SHIELD WELDMENT 9 0- SPACER SUPPORT, MOUNT PLATE 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page

41 0/ NH C/C & CIH 00 - HEADERS (S/N 090-CURRENT) GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT KIT ( 989) ITEM PART NUMBER DESCRIPTION BOLT, / X -/ SERR FLG 988- BRACKET, GBOX MT. (NH -C/CIH00) 98- HINGE, SHIELD 98- WELDMENT, GBOX DRIVE RH SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD 90 BOLT, /NC X -/ GR HCS ZP NUT, / NE NYLOCK ZP 8 0 BOLT, / X GR HEX CPSCREW ZP LATCH, FLEXIBLE DRAW 0 SCW, MCH 0- X / HHCS GR8 PLAIN BOLT, 0- X / HHCS GR8 PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP NUT, /- UNC NYLOCK 998- PLATE, GEARBOX MOUNT 0 WASHER, / FLAT ZP 998- TEMPLATE, 00/C GBOX DRILL (NOT SHOWN) 0 ADAPTER, -0MORING/-8MJIC DEG (NOT SHOWN) Page

42 GEARBOX MOUNT/DRIVE KIT NH 0 & CIH 00 0/ 8 KIT, GEARBOX MOUNT - CIH 00/NH 0 ( 0) ITEM PART NUMBER DESCRIPTION NUT, /- UNC NYLOCK BUSHING, SD -/8" 0 WASHER, / FLAT ZP BOLT, / X HEX HD GR ZP 98 KEY, / SQUARE X -/ LONG BOLT, / X -/ SERR FLANGE 08- BRACKET, GEARBOX MOUNT 8 (SEE DRIVELINE OPTIONS, PAGES -9) Page 8

43 0/ NH 90-9, C/C & CIH 00 8 & 0 SINGLE DRIVE HEADERS RIGHT HAND DRIVE KIT RH DRIVE KIT 8 /0 NH/CIH00 SINGLE ( 88) ITEM PART NUMBER DESCRIPTION 00 BOLT, / X / GR HEX HD ZP 0 SCREW, /8- X LG THD CUTT ZP 0 WASHER, / FLAT ZP 9- WELDMENT, PTO HOLDER BOLT, / X -/ SERR FLG SPACER,.8 X. X.0 STL 0- SLIP CLUTCH SHIELD 09 SHIELD MOUNT PLATE ASSEMBLY (INCLUDES ITEMS 8-9) 8 0 NUT, /-8 TINNERMAN U-TYPE PLATE, SHIELD MOUNT SHAFT, DRIVE (SEE DRIVELINE OPTIONS, PAGES -9) Page 9

44 RIGHT HAND DRIVE KIT NH 90-9, C/C & CIH 00 SINGLE DRIVE HEADERS 0/ ASSEMBLY, RH DRIVE KIT FT. SINGLE ( 88) ITEM PART NUMBER DESCRIPTION BUSHING, SD -/8" 0 BOLT, / X HEX HD GR ZP 0 SCREW, /8- X LG THD CUTT ZP 98 KEY, / SQUARE X -/ LONG 9- BRACKET, DRIVELINE SUPPORT SHAFT, DRIVE WELDMENT, GEARBOX SHIELD Page 0

45 0/ NH 90-9, C/C & CIH DOUBLE DRIVE HEADERS RIGHT HAND DRIVE KIT Use OEM Mounting Hardware OEM Drive Shaft RH DRIVE KIT ( 08) ITEM PART NUMBER DESCRIPTION 00 BOLT, / X / GR HEX CAPSCREW ZP 0 WASHER, / FLAT ZP 0- SLIP CLUTCH SHIELD 09 SHIELD MOUNT PLATE ASSEMBLY (INCLUDES ITEMS -) 0 NUT, / -8 TINNERMAN U-TYPE 08- PLATE, SHIELD MOUNT - PLATE, BEARING MOUNT (SEE DRIVELINE OPTIONS, PAGES -9) Page

46 RIGHT HAND DRIVE KIT NH 90-9, C/C & CIH 00 - HEADERS 0/ OEM DRIVELINE 8 9 Page

47 0/ NH 90-9, C/C & CIH 00 - HEADERS RIGHT HAND DRIVE KIT ITEM PART NUMBER RH DRIVE KIT DESCRIPTION SPLINE PTO SHAFT ( 98) HEX PTO SHAFT ( 0) -00 ASSEMBLY, SHIELD MOUNT (INCLUDES ITEMS -) - PLATE, SHIELD MOUNT 0 NUT, / -8 TINNERMAN U-TYPE (SEE DRIVELINE OPTIONS, PAGES - 9) SHIELD, DRIVE SHAFT (8 ) 00 FLANGETTE, MS RND BIT, ZP 09 BEARING, -/8 INSERT SA0FP 0 WASHER, /8 SAE FLAT ZP 8 0 WASHER, / FLAT ZP 9 88 NUT, /8 NE NYLOCK ZP 0 09 WASHER, / SAE FLAT ZP 0 BOLT, CARR /8 X GR HEX HD ZP BOLT, / X-/ GR ZP CRG 00 BOLT, / X / GR HEX HD ZP NUT, /- UNC NYLOCK SHAFT, SICKLE DRIVE (NH) 9- SHIELD, SLIP CLUTCH 989- BRACKET, BEARING MOUNT (USED ON PRE 0 HEADER MODELS) 99- BRACKET, BEARING MOUNT (USED ON 0 & LATER HEADER MODELS) 8 BUSHING, SD -/8 (INCLUDES ITEM BELOW) 8 BOLT, / X -/ GR HEX CPS ZP 9 98 KEY, / X -/ SQUARE SHAFT, -/8 SPLINE STUB 0-00 SHAFT, -/8 SPLINE TO HEX Page

48 RIGHT HAND DRIVE KIT NH 0 & CIH HEADERS 0/ KIT, RH DRIVE 0 / - CIH 00/NH 0 ( ) ITEM PART NUMBER DESCRIPTION LATCH, FLEXIBLE DRAW 0 BOLT, / X HEX HD GR ZP 0 SCREW, /8- X THD CUTT ZP NUT, / NE NYLOCK ZP 90 BOLT, / X -/ GR HCS NC ZP 9 NUT, 0/ NYLOCK TYPE NM, ZP SCREW, MCH. 0- X / PAN HD PH ZP 8 BOLT, 0- X /" HHCS GR8 PLAIN 9 9- BRACKET, DRIVELINE SUPPORT HINGE, SHIELD 98- WELDMENT, GBOX DRIVE LH SHIELD SHAFT, DRIVE WELDMENT, GEARBOX SHIELD (SEE DRIVELINE OPTIONS, PAGES - 9) Page

49 0/ NH 0 & CIH HEADERS RIGHT HAND DRIVE KIT ITEM PART NUMBER KIT, RH DRIVE CIH 00/NH 0 DESCRIPTION 0 FT. 0 BOLT, /8 X CRG GR NC ZP 0 SCREW, /8- X THD CUTT ZP BOLT, / X / SERR FLANGE GR ZP 88 NUT, /8 NE NYLOCK ZP BOLT, / X SERR FLANGE BOLT, / X -/ SERR FLANGE 09 BEARING, -/8" INSERT SA0FP 8 00 FLANGETTE, MS RND BIT, ZP 9 0- SLIP CLUTCH SHIELD 0 09 SHIELD MOUNT PLATE ASSY. 9- BRACKET, DRIVELINE SUPPORT SHIELD, DRIVE SHAFT (.") SHIELD, DRIVE SHAFT (0") WELDMENT, GEARBOX SHIELD 08- BRACKET, BEARING MOUNT SHAFT, GEARBOX DRIVE (0FT) SHAFT, GEARBOX DRIVE (FT) - WELDMENT, SHIELD (SEE DRIVELINE OPTIONS, PAGES - 9) FT. 8 Page

50 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 0/ F 9 0 M 8 E I K L B D A G H J 8 C B COMBINE PTO TYPE SPLINE HEADER TYPE HEADER LENGTH HEADER DRIVE DRIVELINE KIT NUMBER ' - 0' SINGLE X NH ' - ' DOUBLE X ' DOUBLE X NH C/C & CIH 00 0' - ' ALL X NH 0 & CIH 00 ( COMBINES) 0 - ALL X Page

51 0/ ALL MODELS DRIVELINE/C FLANGE ASSEMBLY ITEM PART NUMBER DRIVELINES DESCRIPTION COUNTER FLANGE, -/8" SPLINE W/QD DRIVELINE/CLUTCH, -/8" SPLINE(S) (SEE TABLE BELOW) DRIVELINE/CLUTCH, -/8" SPLINE(L) (SEE TABLE BELOW) 9 BOLT, / X HEX HD GR ZP NUT, / NE NYLOCK ZP -00 ITEM PART NUMBER ASSEMBLY, DRIVELINE/CLUTCH DESCRIPTION KIT, CROSS & BEARING W SAFETY CHAIN YOKE, INBOARD B 8 8 YOKE, INBOARD A 9 0 CONE, RIB SAFETY 0 RING, SC BEARING -00 YOKE, FLANGE -00 CLUTCH, FRICTION (INCLUDES ITEMS A-M) A 0-00 SPRING, BELVILLE (W/SHIELD) B 0-00 SET, FRICTION DISC C 0-00 YOKE, FLANGE D -00 PLATE, THRUST E -00 HUB, CLUTCH F NUT, M0 X. HEX NYLOCK TYPE NE G -00 BOLT, M0 X. X 0 CLASS 8.8 HC H 8-00 BACKUP RING I 9-00 BALL, CLUTCH L 0-00 SPRING, COMPRESSION K -00 COLLAR, LOCK L -00 RING, BACKUP M -00 RING, SNAP 8-00 PROFILE, INNER B (SHORT) -00 PROFILE, INNER B (LONG) 9-00 PROFILE, OUTER A (SHORT) -00 PROFILE, OUTER A (LONG) 0-00 TUBE, INNER SHIELD (SHORT) -00 TUBE, INNER SHIELD (LONG) -00 TUBE, OUTER SHIELD (SHORT) -00 TUBE, OUTER SHIELD (LONG) PIN, M0 X 80 SPRING 8 0 DECAL, OUT 9 DECAL, IN Page

52 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 0/ F 9 0 G 8 E I K M H J L B D A 8 C B COMBINE PTO TYPE HEX CIH 00 SPLINE HEADER TYPE HEADER LENGTH HEADER DRIVE DRIVELINE KIT NUMBER ' - ' ALL X 0' - ' ALL X NH C/C & CIH 00 0' - ' ALL X NH 0 & CIH 00 ( COMBINES) 0' - ' ALL X CIH 00 (PRE 000 COMBINES) 0 - ALL X 0' - ' ALL X Page 8

53 0/ ALL MODELS DRIVELINE/C FLANGE ASSEMBLY ITEM PART NUMBER DRIVELINES DESCRIPTION COUNTER FLANGE, -/8" HEX DRIVELINE/CLUTCH, -/8" SPLINE(L) (SEE TABLE BELOW) DRIVELINE/CLUTCH, -/8" SPLINE(XL) (SEE TABLE BELOW) -00 DRIVELINE/CLUTCH, -/8 SPL (SEE TABLE BELOW) 9 BOLT, / X HEX HD GR ZP NUT, / NE NYLOCK ZP ITEM PART NUMBER ASSEMBLY, DRIVELINE/CLUTCH DESCRIPTION KIT, CROSS & BEARING W SAFETY CHAIN YOKE, INBOARD B YOKE, INBOARD S 8 8 YOKE, INBOARD A YOKE INBOARD S 9 0 CONE, RIB SAFETY 0 RING, SC BEARING YOKE, FLANGE -00 CLUTCH, CW OVERRUNNING -00 CLUTCH, FRICTION (INCLUDES ITEMS A-M) A 0-00 SPRING, BELVILLE (W/SHIELD) B 0-00 SET, FRICTION DISC C 0-00 YOKE, FLANGE D -00 PLATE, THRUST E -00 HUB, CLUTCH F NUT, M0 X. HEX NYLOCK TYPE NE G -00 BOLT, M0 X. X 0 CLASS 8.8 HC H 8-00 BACKUP RING I 9-00 BALL, CLUTCH L 0-00 SPRING, COMPRESSION K -00 COLLAR, LOCK L -00 RING, BACKUP M -00 RING, SNAP -00 PROFILE, INNER B (LONG) PROFILE, INNER SLGA -00 PROFILE, OUTER A (LONG) PROFILE, OUTER SL -00 TUBE, INNER SHIELD (LONG) TUBE, INNER SHIELD ROUND -00 TUBE, OUTER SHIELD (LONG) TUBE, OUTER SHIELD OVAL PIN, M0 X 80 SPRING 8 0 DECAL, OUT 9 DECAL, IN Page 9

54 GEARBOX/FAN KIT #: S/N KIT #8: S/N / Page 0

55 0/ KIT #: S/N KIT #8: S/N GEARBOX/FAN GEARBOX GEAR RATIO APPLICABLE MODELS 8.: ALL NEW HOLLAND COMBINES; CASE IH SERIES 9.: PRE 000 CASE IH COMBINES ITEM PART NUMBER GEARBOX/FAN DESCRIPTION 8.: ( 8) GEAR RATIO 9.: ( 0) GEARBOX, FAR 8.: (SEE PAGES -) GEARBOX, FAR 9.: (SEE PAGES -) HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 0 BOLT, / X -/ HEX HD 09 NUT, / CENTERLOCK GRB ZP 9 8 FAN RH SIDE W/ BUTTERFLY 0 BOLT, /8 X THREAD CUT WASHER, /8 SAE FLAT FAN ROTOR,.8 X CW /8 STL WASHER, / SAE FLAT 0 0 NUT, SPINDLE CASTLE 08 PIN, / X -/ COTTER 9 8 FAN LH SIDE W/ BUTTERFLY BOLT, /8 NC X -/ HEX HD 0 NUT, /8 SERR FLANGE BASE WELDMENT, BASE STRAP 9 BEARING, /8 -BOLT FLNG. 8 8 BOLT, / X / CRG 9 WELDMENT, SCREEN/BLADE 0 9 WASHER, /8 SAE FLAT WELDMENT, PIVOT 8 WELDMENT, SCREEN CLEANER WELDMENT, SCREEN CAP 0 NUT, / SERR FLANGE BOLT, / X / HEX HD 09 SCREW, NO. X / TAPPING HWH ZP 0 KEYSTOCK, / 8 - WELDMENT, ACTUATOR MOUNT 9 - WELDMENT, VALVE ACTUATOR 0 8- WELDMENT, INDICATOR PLATE, LARGE BUTTERFLY BOLT, #0- X IN. GR8 HCPS PLAIN 9 NUT, #0 X NYLOCK 0-00 ACTUATOR, STROKE WARNER BOLT, / X -/ HCS G ZP 08 NUT, / CENTERLOCK 9- WRAP, ROTARY SCREEN Page

56 GEARBOX/FAN KIT #: S/N 090-CURRENT KIT #8: S/N 0988-CURRENT 0/ Page

57 0/ KIT #: S/N 090-CURRENT KIT #8: S/N 0988-CURRENT GEARBOX/FAN GEARBOX GEAR RATIO APPLICABLE MODELS 8.: ALL NEW HOLLAND COMBINES; CASE IH SERIES 9.: PRE 000 CASE IH COMBINES ITEM PART NUMBER GEARBOX/FAN DESCRIPTION 8.: ( 8) GEAR RATIO 9.: ( 0) GEARBOX, FAR 8.: (SEE PAGES -) GEARBOX, 9.: (SEE PAGES -) PLATE,HUB/MOTOR MT.(8"B-PILOT) 0 BOLT, / X -/ HEX HD GR ZP 09 NUT, /" CENTERLOCK GRB ZP 9 8"FAN RH SIDE W/BUTTERFLY 0 SCREW,/8-*"LG THD CUTT ZP WASHER,/8"SAE FLAT,ZP,PC/LB FAN ROTOR,.8" X " CW,/8,STL WASHER,/"SAE FLAT ZP,PC/LB 0 9 8"FAN LH SIDE W/BUTTERFLY BOLT, /8 X -/" HEX HD GR ZP 0 NUT, /8" SERRATED FLANGE NC ZP BASE,8"ROTARY SCREEN 0 KEY, / SQ X -/" PLAIN - WELDMENT, ACTUATOR MOUNT 0-00 ACTUATOR, " STROKE ELECTRIC BOLT / X -/ HHCS GR ZP 8 08 NUT, / CENTERLOCK NC ZP WELDMENT,8"ROTARY SCRN.BASE STRAP 0 0 NUT, /" NF CASTLE ZP 08 PIN /* / COTTER PIN ZP BEARING, /" ROUND INSERT FLANGETTE, MM HOLE 999- WELDMENT, PIVOT SCREEN/BLADE WELDMENT (RH) BOLT, /X/ GR NC ZP CRG NUT, / SERR FLNG NC ZP 8 0 NUT, /"-0 SERRATED FLNG NC ZP 9 00 BOLT, /*/ GR HEX HD ZP WELDMENT, 8" FAN SCREEN CLEANER SCREEN CAP WELDMENT 9- WRAP, ROTARY SCREEN BOLT,0- * " GR8 HCPS PLAIN 9 NUT, 0/ NYLOCK TYPE NM, ZP 09 SCREW # * / TAPPING HWH ZP - WELDMENT, VALVE ACTUATOR (8"RH) -00 WELDMENT, BUTTERFLY SHAFT (8") 8 0- WELDMENT, INDICATOR (8") Page

58 GEARBOX REPLACEMENT PARTS ALL MODELS 0/ ITEM PART NUMBER GEARBOX (REPLACEMENT PARTS) DESCRIPTION GEAR RATIO 8.: ( ) 80 GEAR, SP BEV LH 9T NPN GEAR, SP BEV RH 9T -00 NUT, LOCK /" NF NPN SHIM,.00 RED NPN SHIM,.00 BLUE NPN SPEC. HOUSING, SUB-ASSEMBLY NPN SPEC. HOUSING, PINION 9.: ( ) Page

59 0/ ALL MODELS GEARBOX REPLACEMENT PARTS ITEM PART NUMBER GEARBOX (REPLACEMENT PARTS) DESCRIPTION GEAR RATIO 8.: ( ) 9.: ( ) 8 NPN SPEC. CAP, OPEN 9 NPN SPEC. CAP, CLOSED 0 8 SPEC. SLEEVE, INPUT 80 SPEC. SHAFT, OUTPUT PINION NPN SPEC. GEAR INTG HEL LH T NPN SPEC. GEAR INTG HEL LH T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. SPACER NPN SPEC. SHIM,.00 RED NPN SPEC. SHIM,.00 BLUE NPN SPEC. SHIM,.00 RED 8 NPN SPEC. SHIM,.00 BLUE 9 8 BEARING, BALL 0NPP OR EQUIVALENT BEARING,.8 X. CUP 8 BEARING, CUP 0 OR EQUIVALENT BEARING,.0 X.0 CONE 89 BEARING, CONE 8 OR EQUIVALENT NPN SCREW, /8" X " NC HHCS GR NPN SCREW, /" X " NC HHCS GR 0 0 NPN SCREW, /8" X -/" NC HHCS GR 8 8 NPN WASHER, /" X -/" X /8" 8 NPN WASHER, -/" X -/" X /8" 9 NPN NUT, /8" NC HEX NPN KEY, /" SQUARE X /" P&W NPN KEY, /" SQUARE X -/" SQUARE END NPN KEY, /" X " WOODRUFF 8 RING, RETAINING RING, BEVELED RETAINING N00- NPN OIL, MOBILUBE SHC W NPN PLATE, NAME, CRARY NPN PAINT, FLAT BLACK PLUG, PIPE SOCKET / NPT 9-00 PLUG, PIPE /" O-RING BOSS 0-00 BREATHER, /8 NPT SEAL, 8 OR EQUIVALENT SEAL, 9 OR EQUIVALENT -00 O-RING, -0 NPN O-RING, -8 NPN O-RING, -8 NPN SCREW, /" X /" NC HHCS GR NPN TAG, LUBRICATION GEARBOX SEAL AND SHIM KIT (INCLUDES ITEMS,,,,, 8,,,, & ) 99 GEARBOX, REBUILT (/8.:) (NOT SHOWN) 0 GEARBOX, REBUILT (/9.:) (NOT SHOWN) GEARBOX GEAR KIT (8.:) (INCLUDES ITEMS,, & ) GEARBOX GEAR KIT (9.:) (INCLUDES ITEMS,, & ) Page

60 SWITCH/MOUNT PLATE ALL MODELS 0/ SWITCH/MOUNT PLATE ASSEMBLY ( ) ITEM PART NUMBER DESCRIPTION DECAL, ACTUATOR SWITCH 89 ELECTRIC SWITCH ASSEMBLY - SPLIT AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS 0-0 (NOT SHOWN) 80 ELECTRIC SWITCH ASSEMBLY - SPLIT AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS 0-0 (NOT SHOWN) - PLATE, SWITCH MOUNT ATTACHMENT, 9 FT. EXTENSION HARNESS ITEM PART NUMBER DESCRIPTION HARNESS, 9 FT PACKARD EXT Page

61 0/ ALL MODELS DECALS THIS SIDE OF MANIFOLD IS TO BE TOWARD THE COMBINE. NW TH ST BOX 89 WEST FARGO, ND 808 (0)-8-0 P/N TM ITEM # PART # DESCRIPTION 00 DECAL, CAUTION DECAL CTR MANIFOLD DIRECTION 00 DECAL, WARNING AIR REEL STRIPING N/A 0 DECAL, CRARY AIR REEL Page

62 Page 8

63 Parts Catalog Air Reel OPTIONS Page 9

64 KIT, GEARBOX/FAN EXTENSION ALL MODELS 0/ Page 0

65 0/ ALL MODELS KIT, GEARBOX/FAN EXTENSION GEARBOX/FAN EXTENSION KIT ( 9) ITEM PART NUMBER DESCRIPTION 08 0 MM BEARING 0 U-BOLT, FAN MOUNT /8 X X ZP 00 BOLT, /8 X GR HEX CAPSCREW ZP 0 BOLT, / X GR HEX CAPSCREW ZP 0 BOLT, / X -/ GR HEX CAPSCREW ZP 0 WASHER, /8 FLAT ZP 0 NUT, /8 HEX NUT NC ZP 8 09 NUT, / CENTER LOCKNUT ZP 9 09 WASHER, / SAE FLAT ZP 0 KEY, / SQ X PLAIN SHAFT/COUPLER WELDMENT 9- HUB, MACHINED EXTENSION 0- PLATE, BEARING RETAINER 8- BRACKET, EXTENSION SUPPORT - CASE IH (SHORT) 9- BRACKET, EXTENSION SUPPORT - CASE IH (LONG) 0- BRACKET, EXTENSION SUPPORT - JD/NH - BRACKET, EXTENSION SUPPORT - GLEANER Page

66 KIT, AUXILIARY REEL TINE ALL MODELS 0/ (LEFT SIDE) (RIGHT SIDE) Page

67 0/ ALL MODELS KIT, AUXILIARY REEL TINE AUXILIARY REEL TINE KIT ( 0) ITEM PART NUMBER DESCRIPTION 0 WASHER, /8 FLAT ZP 0 NUT, /8 CENTER LOCKNUT ZP BOLT, CRG /8 X -/ GR NC SP 0 STL MCH BSH, /8 ID NAR-RIM 0GA 0-00 RH AUX. REEL TINE ASSEMBLY (INCLUDES ITEMS -) 0- PIVOT STRAP/TUBE WELDMENT 9 TINE, PLASTIC REEL 9 SCREW, - X FLAT HD, THD. FORM 0-00 LH AUX. REEL TINE ASSEMBLY (INCLUDES ITEMS -) 0- PIVOT STRAP/TUBE WELDMENT 9 TINE, PLASTIC REEL 9 SCREW, - X FLAT HD, THD. FORM Page

68 KIT, NEUTRAL DRIVE SHAFT SPLINE/HEX SHAFT 0/ KIT, NEUTRAL DRIVE SHAFT ( 0) ITEM PART NUMBER DESCRIPTION 0 BOLT, /8 X CRG 0 WASHER, /8 SAE FLAT 88 NUT, /8 NYLOCK 09 BEARING, -/8 IN. ROUND BORE 00 FLANGETTE, MSI - /8 IN SHAFT, -/8 SPLINE TO HEX Page

69 0/ SPLINE/ SPLINE SHAFT KIT, NEUTRAL DRIVE SHAFT KIT, NEUTRAL DRIVE SHAFT ( 988) ITEM PART NUMBER DESCRIPTION 0 BOLT, /8 X CRG 0 WASHER, /8 SAE FLAT 88 NUT, /8 NYLOCK 09 BEARING, -/8 IN. ROUND BORE 00 FLANGETTE, MSI - /8 IN SHAFT, -/8 SPLINE STUB Page

70 STATIC PRESSURE GAGE ALL MODELS 0/ INCLUDED WITH PN 0-00 ASSEMBLY, STATIC PRESSURE GAGE ( 09-00) ITEM PART NUMBER DESCRIPTION 9-00 GAGE, LOW PRESSURE AIR 0-00 ADAPTOR, -FMNPT/-MJIC BULKHEAD WASHER,.8 X.00 X GRIP, ROUND VINYL (W/HOLE) 0 WASHER, / FLAT Page

71 Parts Catalog Air Reel PARTS INDEX Page

72 Part # Page(s) Part # Page(s) Part # Page(s) ,, 8, , ,, , ,,, 00...,,, 0...,,, , , , 9..., 9..., , , 9..., 9...,, 8, 0, , , , ,, ,, , , , , , , , , , , , , , , , , , , , , ,, ,, , 9, ,, 9,, 0...,, 0,, 0...,,, , 0...,,, 9,,,, ,,,,, ,,,,,, 09...,,,,,,,, 0...,,,,,, 9,,,,, , 9, 09..., ,,, ,,,, 9,, 0..., ,,, 9, 0,,, 9,,,,,, ,,,, 9,,,,,,...,,, 9, , 0..., 9,,,, 09..., 9,, 09..., , 00..., , , 8...,, , , , ,, ,, 9, 0-...,, 9, , 90..., 90..., , , , 0, , , ,, , , , Page 8

73 Part # Page(s) Part # Page(s) Part # Page(s) , , , , , , , , , , , ,, ,, ,, ,, , , , , ,, ,, , , , , , , , , ,, , ,... 9, 0..., 0..., 0..., 08..., , 0,,,, 08..., 09..., 09..., , , ,...,, , ,, ,,,, ,......,, 90...,, ,,,, ,, ,, 8..., 98...,, 0,...,...,,..., ,...,,,,..., , , 00...,...,, , 0..., 0..., , 9..., ,, , 9...,......, , , 88..., 9..., , ,,...,, , 0...,..., , , 8..., 0..., ,..., ,, , ,, , Page 9

74 Part # Page(s) Part # Page(s) Part # Page(s) ,, , , 99..., 90..., 9-..., , , 8-..., , ,, , ,, , , Page 0

75 Page

76 TH ST. NW P.O. BOX 89 WEST FARGO, ND PH: FAX: (0) Manufactured in the United States of America by Crary Industries