Honey Bee. New Holland

Size: px

Start display at page:

Download "Honey Bee. New Holland"

Jayson Powell
5 years ago
Views:

1 PARTS MANUAL CRARY WIND SYSTEM Honey Bee Grain Belt Grain Belt PLUS New Holland 88C 9C Manual P/N Rev Companion to P/N SN Range:

HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER E-MAIL INTERNET Crary Industries 27 2th St. NW P.O. Box 89 West Fargo, ND 58078-089 Mon. - Fri. 8 A.M to 5 P.M. Central Time For Parts and Service: -800-27-75 Fax: -70-282-9522 For Service: serv@crary.

When you send in the completed card to us, we register your Crary Wind System and start coverage under our limited warranty. Two serial number stickers are included with each CWS.

2 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER INTERNET Crary Industries 27 2th St. NW P.O. Box 89 West Fargo, ND Mon. - Fri. 8 A.M to 5 P.M. Central Time For Parts and Service: Fax: For Service: serv@crary.com Visit us on the Send us Your Warranty Card Please take time to fill in the information requested on the card. When you send in the completed card to us, we register your Crary Wind System and start coverage under our limited warranty. Two serial number stickers are included with each CWS. The decals are located on the CWS manifold. Place one sticker on the warranty registration card and mail it back to Crary Industries. Place the second sticker in the owner s manual for future reference.

3 Parts ordering information For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Crary Wind System to provide the most efficient service. See information below for how to identify and record the serial number for your Air Reel. ILLUSTRATION AND TEXT This parts catalog is arranged to assist in identifying CWS parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information on the right. Except for some common hardware, all parts are identified with an item number that corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the CWS. Crary replacement parts are available from your Crary Dealer. To obtain prompt, efficient service, remember to give the dealer the correct part description and serial number of the CWS. When ordering parts for your unit provide the following:. The SERIAL NUMBER of your CWS. 2. The PART NUMBER of the part.. The PART DESCRIPTION.. The QUANTITY needed. Serial number location WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on this unit. Give your authorized Crary dealer the serial number of your CWS when ordering parts, requesting service, or any other information. Record the serial number in the space provided below and on the warranty and registration card. The serial number is located on the manifold. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Page iii

4 SECTION Contents PAGE AIR MANIFOLD DRIVELINE/C FLANGE ASSEMBLY DROP TUBE KIT FAN HOSE ASSEMBLY GEARBOX/FAN GEARBOX MOUNT KIT GEARBOX REPLACEMENT PARTS REEL ARM MOUNT KIT RIGHT HAND DRIVE KIT (GRAIN BELT PLUS/NEW HOLLAND 88C)... 5 SWITCH/MOUNT PLATE ASSEMBLY OPTIONS STATIC PRESSURE GAGE... 0 PARTS INDEX...

5 Parts Catalog Crary Wind System Honey Bee Headers Grain Belt, Grain Belt PLUS New Holland Headers 88C, 9C Page

6 GEARBOX MOUNt kit GRAIN BELT/NEW HOLLAND 9C 0/ Page 2

7 0/08 GRAIN BELT/NEW HOLLAND 9C GEARBOX MOUNT KIT GEARBOX MOUNT KIT (5295) ITEM PART NUMBER DESCRIPTION QTY 257 BUSHING, SD -/ WASHER, /2 FLAT ZP WASHER, /8 SAE FLAT ZP 2 55 BOLT, 5/6 x / SERR FLG GR5 ZP 5 56 BOLT, /8 x -/ HEX HD GR5 ZP NUT, /8 NE NYLOCK ZP KEY, 5/6 x -/2 SQUARE BOLT, /2 x SERR FLG BOLT, /2 x -/ SERR FLG SHIELD MOUNT PLATE ASSY. (INCLUDES ITEMS 0 & ) SHIELD MOUNT PLATE 502 NUT, 5/6-8 TINNERMAN U-TYPE SLIP CLUTCH SHIELD SHAFT, MACHDON LH DRIVE GEARBOX SHIELD WELDMENT BRACKET, FAN SUPPORT 6 (SEE PAGES 6-7 FOR DRIVELINE OPTIONS) BRACKET, DRIVELINE SUPPORT SCREW, /8-6 x LG THD CUTT ZP ASSEMBLY, GEARBOX MOUNT (HONEY BEE) (INCLUDES ITEMS 20-2) BRACKET, HONEYBEE GEARBOX MOUNT BRACKET, GEARBOX SUPPORT BOLT, /2 x -/ HEX HD NUT, /2 NYLOCK 7 Page

8 GEARBOX MOUNt kit GRAIN BELT PLUS/NEW HOLLAND 88C 0/ GEARBOX MOUNT KIT (500) ITEM PART NUMBER DESCRIPTION QTY PLATE, HONEY BEE GEARBOX MOUNT PLATE, HONEY BEE GEARBOX MOUNT SIDE 56 BOLT, /2 x SERR FLG BOLT, /2 x -/ SERR FLG WELDMENT, GEARBOX SHIELD NUT, /2- UNC NYLOCK SLIP CLUTCH SHIELD SHIELD MOUNT PLATE ASSY WASHER, 5/6 FLAT ZP BOLT, 5/6 x / GR5 HEX HD ZP 50 WASHER, /2 FLAT ZP 8 Page

9 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C RIGHT HAND DRIVE KIT RH HAND DRIVE KIT (562) ITEM PART NUMBER DESCRIPTION QTY SHAFT, LH DRIVE 2 56 BOLT, /8 x -/ HEX HD GR5 ZP BUSHING, SD -/8 2 (SEE PAGES 6-7 FOR DRIVELINE OPTIONS) KEY, 5/6 x -/2 SQUARE BOLT, 5/6 x GR5 HHCS NC ZP NUT, 5/6 NE NYLOCK ZP 8 55 NUT, 5/6 SERR FLNG NC ZP NUT, /8 NE NYLOCK ZP BRACKET, PTO HOLDER 529 BOLT, EYE 5/6-8 x 2 LG ZP WASHER, 5/6 FLAT ZP PTO HOLDER CHAIN ASSEMBLY 5260 WASHER, /8 SAE FLAT ZP Page 5

10 DRIVELINE/C FLANGE ASSEMBLY ALL MODELS 0/08 2 SEE DRAWING BELOW FOR PARTS BREAKDOWN 6 0 D 8 F 9 E 5 7 A 2 B G C B Page 6

11 0/08 ALL MODELS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE PART # COMBINE PTO TYPE 6 SPLINE COMBINE PTO 2 SPLINE COMBINE PTO HEX COMBINE PTO X X X DRIVELINE/C-FLANGE ASSEMBLY ITEM PART NUMBER DESCRIPTION ASSEMBLY, DRIVELINE/CLUTCH, -/8 6 SPL (SEE TABLE BELOW) HEX ( ) COMBINE PTO SHAFT TYPE 6 SPLINE ( ) 2 SPLINE ( ) BOLT, 5/6 X GR5 HHCS NC ZP NUT, 5/6 NE NYLOCK ZP COUNTER FLANGE, -/8 HEX 9-00 COUNTER FLANGE, -/8 6 SPLINE 9-00 COUNTER FLANGE, -/8 2 SPLINE DRIVELINE SERVICE PARTS ( ) ITEM PART NUMBER DESCRIPTION QTY KIT, CROSS AND BEARING W SAFETY CHAIN YOKE, INBOARD S YOKE, INBOARD S CONE, 6 RIB SAFTEY RING, SC25 BEARING YOKE, FLANGE CLUTCH, FRICTION (INCLUDES ITEMS BELOW) A SPRING, BELVILLE (WSCHEID) B SET, FRICTION DISC C YOKE, FLANGE D PLATE, THRUST E HUB, CLUTCH F 567 NUT, M0 X.5 HEX NYLOCK TYPE NE 6 G BOLT, M0 X.5 X 50 CLASS 8.8 HC BACK-UP RING (NOT SHOWN) BALL, CLUTCH (NOT SHOWN) SPRING, COMPRESSION (NOT SHOWN) 7-00 COLLAR, LOCK (NOT SHOWN) RING, BACKUP (NOW SHOWN) 7-00 RING, SNAP (NOT SHOWN) PROFILE, INNER SLGA PROFILE, OUTER S5L TUBE, INNER SHIELD RND TUBE, OUTER SHIELD OVAL PIN, M0 X 80 SPRING DECAL, OUT 9 22 DECAL, IN 557 SCREW, WS6505 (NOT SHOWN) 2 Page 7

12 GEARBOX/FAN GRAIN BELT/NEW HOLLAND 9C 0/08 NOTE: ARROWS IN DRAWING SHOW PROPER GEARBOX SHAFT ROTATION VERSUS ROTOR ROTATION DIRECTION Page 8

13 0/08 GRAIN BELT/NEW HOLLAND 9C GEARBOX/FAN GEARBOX GEAR RATIO 8.6: NEW HOLLAND, CASE IH SERIES 9.75: CASE IH PRE 5000 SERIES, JOHN DEERE APPLICABLE COMBINES GEARBOX/FAN ITEM PART NUMBER DESCRIPTION 8.6: ( ) 222 GEARBOX, 8.6: (SEE PAGES 2-) GEAR RATIO 9.75: ( ) 2227 GEARBOX, 9.75: (SEE PAGES 2-) 2 25 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 50 BOLT, /2 X -/2 HEX HD 509 NUT, /2 CENTERLOCK GRB ZP FAN RH SIDE W/ BUTTERFLY BOLT, /8 X THREAD CUT WASHER, 7/8 SAE FLAT FAN ROTOR, 6.5 X CW, 7/8 STL WASHER, / SAE FLAT NUT, HST SPINDLE CASTLE 5068 PIN, 5/2 X -/ COTTER FAN LH SIDE W/BUTTERFLY 56 BOLT, /8 NC X -/ HEX HD NUT, /8 SERR FLANGE BASE, 8 ROTARY SCREEN KEYSTOCK, / WELDMENT, ACTUATOR MOUNT WELDMENT, VALVE ACTUATOR WELDMENT, INDICATOR 20 2 PLATE, LARGE BUTTERFLY BOLT, #0-2 X IN. GR8 HCPS PLAIN NUT, #0 X 2 NYLOCK ACTUATOR, 2 STROKE WARNER 2 52 BOLT, / X -/2 HCS G5 ZP NUT, / CENTERLOCK WELDMENT, 8 ROTARY SCREEN BASE STRAP BEARING, / ROUND INSERT FLANGETTE, 7MM 2 HOLE WELDMENT, 8 RH FAN ROTARY SCREEN ROLL BOLT, 5/6 X / CRG 55 NUT, 5/6 SERR FLANGE WELDMENT, PIVOT WELDMENT, 8 FAN SCREEN CLEANER 505 NUT, / SERR FLANGE BOLT, / X / HEX HD WELDMENT, 8 FAN ROTARY SCREEN CAP WASHER, /2 SAE FLAT Page 9

14 GEARBOX/FAN GRAIN BELT PLUS/NEW HOLLAND 88C 0/08 GEARBOX GEAR RATIO APPLICABLE COMBINES 7.269: CHALLENGER, GLEANER, MASSEY FERGUSON, LEXION 8.8: CASE IH SERIES, NEW HOLLAND 9.75: CASE IH PRE 5000 SERIES, JOHN DEERE Page 0

15 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C GEARBOX/FAN GEARBOX/FAN ITEM PART NUMBER DESCRIPTION 7.269: (22757) 222 GEARBOX, 7.269: (SEE PAGES 2-) GEAR RATIO 2226 GEARBOX, 8.8: (SEE PAGES 2-) 8.8: (22759) 2227 GEARBOX, 9.75: (SEE PAGES 2-) 2 25 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 50 BOLT, /2 X -/2 HEX HD 509 NUT, /2 CENTERLOCK GRB ZP FAN RH SIDE W/ BUTTERFLY BOLT, /8 X THREAD CUT WASHER, 7/8 SAE FLAT FAN ROTOR, 6.5 X CW, 7/8 STL WASHER, / SAE FLAT FAN LH SIDE W/ BUTTERFLY 56 BOLT, /8 NC X -/ HEX HD NUT, /8 SERR FLANGE BASE 7022 KEYSTOCK, / WELDMENT, ACTUATOR MOUNT WELDMENT, VALVE ACTUATOR WELDMENT, INDICATOR 8 2 PLATE, LARGE BUTTERFLY BOLT, #0-2 X IN. GR8 HCPS PLAIN NUT, #0X2 NYLOCK ACTUATOR, 2 STROKE WARNER BOLT, / X -/2 HCS G5 ZP NUT, / CENTERLOCK WELDMENT, 8 ROTARY SCREEN BASE STRAP NUT, HST SPINDLE CASTLE PIN, 5/2 X -/ COTTER BEARING, / ROUND INSERT FLANGETTE, 7MM 2 HOLE WELDMENT, PIVOT WELDMENT, ROTART SCREEN (8 -RH) 567 BOLT, 5/6 X / CRG 2 55 NUT, 5/6 SERR FLANGE 505 NUT, / SERR FLANGE 500 BOLT, / X / HEX HD WELDMENT, 8 FAN SCREEN CLEANER WELDMENT, 8 FAN ROTARY SCREEN CAP 9.75: (22760) Page

16 GEARBOX REPLACEMENT PARTS ALL MODELS 0/ ITEM PART NUMBER DESCRIPTION GEARBOX (REPLACEMENT PARTS) 7.269: (222) 8.6: (222) GEAR RATIO 8.8: (2226) GEAR, SP BEV LH 9T 2 NPN 66 GEAR, SP BEV RH 29T NUT, LOCK /" NF NPN 66 SHIM,.002 RED NPN 66 SHIM,.005 BLUE NPN SPEC. HOUSING, SUB-ASSEMBLY 7 NPN SPEC. HOUSING, PINION 8 NPN SPEC. CAP, OPEN NPN SPEC. CAP, CLOSED : (2227) Page 2

17 0/08 ALL MODELS GEARBOX REPLACEMENT PARTS ITEM PART NUMBER DESCRIPTION GEARBOX (REPLACEMENT PARTS) 7.269: (222) 8.6: (222) GEAR RATIO 8.8: (2226) SPEC. SLEEVE, INPUT 6820 SPEC. SHAFT, OUTPUT PINION 2 NPN SPEC. GEAR INTG HEL LH T NPN SPEC. GEAR INTG HEL LH 5T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. GEAR, HEL RH 8T NPN SPEC. SPACER 5 NPN SPEC. SHIM,.002 RED 6 NPN SPEC. SHIM,.005 BLUE 7 NPN SPEC. SHIM,.002 RED 8 NPN SPEC. SHIM,.005 BLUE BEARING, BALL 206NPP OR EQUIVALENT BEARING, 2.28 X.65 CUP BEARING, CUP OR EQUIVALENT BEARING,.250 X.660 CONE BEARING, CONE OR EQUIVALENT NPN SCREW, /8" X " NC HHCS GR5 25 NPN SCREW, 5/6" X " NC HHCS GR NPN SCREW, /8" X -/" NC HHCS GR NPN WASHER, /" X -/2" X /8" 28 NPN WASHER, -7/6" X -/" X /8" NPN NUT, /8" NC HEX NPN KEY, /" SQUARE X 5/6" P&W NPN KEY, /" SQUARE X -/2" SQUARE END 2 NPN KEY, /" X " WOODRUFF 68 RING, RETAINING NPN RING, BEVELED RETAINING N NPN OIL, MOBILUBE SHC 75W NPN PLATE, NAME, CRARY 9.75: (2227) 7 NPN PAINT, FLAT BLACK NPN PLUG, PIPE SOCKET / NPT NPN PLUG, PIPE /2" O-RING BOSS PLUG, /8-27 VENTED PIPE 6625 SEAL, 7268 OR EQUIVALENT SEAL, 295 OR EQUIVALENT NPN O-RING, -0 NPN O-RING, NPN O-RING, NPN SCREW, 5/6" X /" NC HHCS GR5 7 NPN TAG, LUBRICATION 625 GEAROX SEAL AND SHIM KIT (INCLUDES ITEMS, 5, 5, 6, 7, 8,,2,, & 5) 258 GEARBOX, REBUILT (222/7.27:) (NOT SHOWN) GEARBOX, REBUILT (222/8.:) (NOT SHOWN) 259 GEARBOX, REBUILT (2226/8.8:) (NOT SHOWN) 2520 GEARBOX, REBUILT (2227/9.7:) (NOT SHOWN) GEARBOX GEAR KIT (8.6:) (INCLUDES ITEMS, 2, 2 & ) GEARBOX GEAR KIT (8.8:) (INCLUDES ITEMS, 2, 2 & ) GEARBOX GEAR KIT (9.75:) (INCLUDES ITEMS, 2, 2 & ) Page

18 FAN HOSE ASSEMBLY GRAIN BELT/NEW HOLLAND 9C 0/ FAN HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION QTY TUBE MOUNT WELDMENT MANIFOLD SUPPORT ASSEMBLY (INCLUDES ITEMS 2 & ) WELDMENT, MANIFOLD SUPPORT GUIDE, SADDLE U-BOLT, 5/6-8 x 8.9 x WASHER, 5/6 SAE FLT ZP NUT, 5/6 SERR FLNG NC AP CLAMP, HALF BOLT, CARR /8 x -/ GR5 NC ZP WASHER, /8 SAE FLAT ZP BOLT, /2 x GR5 HEX HD ZP 2 50 BOLT, /2 x -/ GR5 HHCS NC ZP T-BOLT CLAMP 8-/ CLAMP, 8-/6 T-BOLT 26 ELBOW, RUBBER-8 x 5 DEG MANIFOLD, 56 ALUMINUM 6 77 MANIFOLD ELBOW -8 (MR) CAP, 8 NOTCHED TUBE FLEX HOSE 8 x 8 LG ELBOW SUPPORT BAND NUT, /2- UNC NYLOCK NUT, /8 NE NYLOCK ZP WASHER, /2 FLAT ZP MAINFOLD, 2 ALUMINUM Page

19 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY ITEM PART NUMBER DESCRIPTION QTY 5250 WASHER, 5/6 FLAT ZP NUT, 5/6 NE NYLOCK ZP TUBE MOUNT WELDMENT 609 T-BOLT CLAMP 8-/ CLAMP, 8-/6 T-BOLT 6 26 ELBOW, RUBBER-8 x 5 DEG BOLT, 5/6 x -/ GR5 ZP CRG U-BOLT, 5/6-8 x 8.9 x NUT, 5/6 SERR FLNG NC ZP MANIFOLD, 56 ALUMINUM ELBOW SUPPORT BAND FLEX HOSE 8 ID x 6 FT. 77 MANIFOLD ELBOW -8 (MR) 292 CAP, 8 NOTCHED TUBE 5 55 BOLT, 5/6 x / SERR FL GR5 ZP TUBE MOUNT WELDMENT 2 Page 5

20 REEL ARM MOUNT (LH) GRAIN BELT/NEW HOLLAND 9C 0/ Page 6

21 0/08 GRAIN BELT/NEW HOLLAND 9C REEL ARM MOUNT (LH) REEL ARM MOUNT KIT-LH PARTS ITEM PART NUMBER DESCRIPTION QTY NUT, /2- UNC NYLOCK STRAP, ADJUSTMENT (S) TUBE, ARM MOUNT (CIH, GLEANER) 5-2 ARM MOUNT WELDMENT WELDMENT, LH REEL MT (LH-JD, RH-CIH CWS) LH CWS MAINFOLD SUPPORT WELDMENT ASSEMBLY, BRACE CLAMP CLAMP, HALF GUIDE, SADDLE WASHER, /2 FLAT ZP 5057 BOLT, CARR /8 x GR5 NC ZP BOLT, CARR /2 x -/2 GR5 NC ZP 506 BOLT, /2 x -/2 GR5 HEX HD ZP BOLT, /2 x -/ CARR GR5 Z BOLT, /2 x -/2 GR5 ZP CRG 6 57 BOLT, /2 x HEX CPS G5 ZP NUT, /8 NE NYLOCK ZP Page 7

22 REEL ARM MOUNT (RH) GRAIN BELT/NEW HOLLAND 9C 0/ Page 8

23 0/08 GRAIN BELT/NEW HOLLAND 9C REEL ARM MOUNT (RH) REEL ARM MOUNT KIT-RH PARTS ITEM PART NUMBER DESCRIPTION QTY 78 ELECTRIC ACTUATOR ASSEMBLY, PIVOT CLAMP NUT, /2- UNC NYLOCK STRAP, ADJUSTMENT (S) TUBE, ARM MOUNT (CIH, GLEANER) WELDMENT, RH REEL MT (JD-CWS) ARM MOUNT WELDMENT BRACE CLAMP CLAMP, HALF GUIDE, SADDLE 2 50 WASHER, /2 FLAT ZP BOLT, CARR /8 x GR5 NC ZP 558 BOLT, CARR /2 x -/2 GR5 NC ZP 506 BOLT, /2 x -/2 GR5 HEX HD ZP BOLT, /2 x -/ CARR GR5 Z BOLT, /2 x -/2 GR5 ZP CRG BOLT, /2 x 2-/ HEX GR5 ZP BOLT, /2 x 2-/ HEX GR5 ZP NUT, /8 NE NYLOCK ZP Page 9

24 REEL ARM MOUNT (LH) GRAIN BELT PLUS/NEW HOLLAND 88C 0/ Page 20

25 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C REEL ARM MOUNT (LH) REEL ARM MOUNT KIT-LH PARTS ITEM PART NUMBER DESCRIPTION QTY NUT, /2- UNC NYLOCK STRAP, ADJUSTMENT (L) TUBE, ARM MOUNT (CIH, GLEANER) 57 BOLT, /2 x -/ HCS GR5 ZP WELDMENT, LH REEL MT (LH-JD, RH-CIH CWS) LH SUPPORT WELDMENT BRACE CLAMP HALF CLAMP GUIDE, SADDLE WASHER, /2 FLAT ZP 5057 BOLT, CARR /8 x GR5 NC ZP 2 50 WASHER, /8 FLAT ZP BOLT, /2 x -/ CARR GR5 Z 5007 BOLT, /8 x -/2 GR5 HCS ZP NUT, /8 NE NYLOCK ZP 6 Page 2

26 REEL ARM MOUNT (RH) GRAIN BELT PLUS/NEW HOLLAND 88C 0/ Page 22

27 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C REEL ARM MOUNT (RH) REEL ARM MOUNT KIT-RH PARTS ITEM PART NUMBER DESCRIPTION QTY 78 ELECTRIC ACTUATOR PIVOT CLAMP ASSEMBLY NUT, /2- UNC NYLOCK STRAP, ADJUSTMENT (L) TUBE, ARM MOUNT (CIH, GLEANER) WELDMENT, RH REEL MT (JD-CWS) 7 57 BOLT, /2 x -/ HCS GR5 ZP BRACE CLAMP HALF CLAMP GUIDE, SADDLE 2 50 WASHER, /2 FLAT ZP BOLT, CARR /8 x GR5 NC ZP 50 WASHER, /8 FLAT ZP BOLT, /2 x -/ CARR GR5 Z BOLT, /8 x -/2 GR5 HCS ZP BOLT, /2 x 2-/ HEX GR5 ZP BOLT, /2 x 2-/ HEX GR5 ZP RH SUPPORT WELDMENT NUT, /8 NE NYLOCK ZP 6 Page 2

28 REEL ARM MOUNT (CENTER) GRAIN BELT PLUS/NEW HOLLAND 88C 0/ OEM Page 2

29 0/08 GRAIN BELT PLUS/NEW HOLLAND 88C REEL ARM MOUNT (CENTER) REEL ARM MOUNT KIT-CENTER PARTS ITEM PART NUMBER DESCRIPTION QTY NUT, /2- UNC NYLOCK STRAP, ADJUSTMENT (L) TUBE, ARM MOUNT (CIH, GLEANER) 57 BOLT, /2 x -/ HCS GR5 ZP WELDMENT, LH REEL MT (LH-JD, RH-CIH CWS) HALF CLAMP GUIDE, SADDLE WASHER, /2 FLAT ZP BOLT, CARR /8 x GR5 NC ZP BOLT, CARR /2 x -/2 GR5 NC ZP 52 BOLT, /2 x.00 GR5 CARRIAGE ZP CENTER SUPPORT WELDMENT 588 NUT, /8 NE NYLOCK ZP Page 25

30 AIR MANIFOLD ALL MODELS 0/ SECTIONAL MANIFOLD ITEM PART NUMBER DESCRIPTION FT (2") QTY FT. (2") QTY 5007 BOLT, /8" X -/2" HHCS GR5 ZP NUT, /8" NE NYLOCK ZP PLATE, CONNECTOR/BAFFLE DECAL, CWS LOGO (YELLOW) WELDMENT, 0 FT. (L) CWS RH/LH MANIFOLD (2") WELDMENT, 2 FT. CWS RH/LH MANIFOLD (2 ) ASSEMBLY, 0 FT. (XL) CWS CENTER MANIFOLD (2") ASSEMBLY, 0/2 FT. CWS CENTER MANIFOLD (2") Page 26

31 0/08 ALL MODELS DROP TUBE KIT 2 MANIFOLD LENGTH # OF SHORT DROP TUBES (2599) # OF LONG DROP TUBES (25920) 0 (2 TUBE SPACING) 6 2 (2 TUBE SPACING) DROP TUBE KIT ITEM PART NUMBER DESCRIPTION LONG (25920) QTY 55 NUT, 5/6 SERRATED FLANGE NC ZP U-BOLT, 5/6-8 X 8.9 X ASSEMBLY, SHORT AIR TUBE ASSEMBLY, LONG AIR TUBE 7 FOAM SEAL-AIR TUBE (NOT SHOWN) SHORT (2599) QTY Page 27

32 SWITCH/MOUNT PLATE ALL MODELS 0/08 2 SWITCH/MOUNT PLATE ASSEMBLY (2) ITEM PART NUMBER DESCRIPTION QTY 267 DECAL, ACTUATOR SWITCH ELECTRIC SWTICH ASSEMBLY - SPLIT 6 AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS (NOT SHOWN) 7850 ELECTRIC SWITCH ASSEMBLY - SPLIT 5 AMP (INCLUDES ITEM BELOW) 90 SWITCH, P COL HERS (NOT SHOWN) 22-2 PLATE, SWITCH MOUNT ATTACHMENT, 9 FT. EXTENSION HARNESS ITEM PART NUMBER DESCRIPTION QTY HARNESS, 9 FT PACKARD EXT Page 28

33 Parts Catalog Crary Wind System OPTIONS Page 29

34 STATIC PRESSURE GAGE ALL MODELS 0/08 INCLUDED WITH PN 0-00 ASSEMBLY, STATIC PRESSURE GAGE (509-00) ITEM PART NUMBER DESCRIPTION QTY GAGE, LOW PRESSURE AIR ADAPTOR, -FMNPT/-MJIC BULKHEAD WASHER,.8 X.500 X GRIP, ROUND VINYL (W/HOLE) WASHER, 7/6 FLAT Page 0

35 Parts Catalog Crary Wind System PARTS INDEX Page

36 Part # Page(s) Part # Page(s) Part # Page(s) ,,,7,9,2,2, ,9,2, , , , 26..., , , , , ,2, , , , , ,,,7,9,2,2, , , , , ,9,2,2, , ,9, , , , , ,2, ,5, ,5, , 55..., ,9,,,5, , ,5,9, , ,5,,7,9,2,2,25, , ,9, , , , , ,5, , , , , , , , , , , , , , , ,, , ,9,2, , ,7,9,2,2, ,7,9,2,2, , , , , , , ,9,2,2, , ,2, ,2, , , , , , , , , , , Page 2

40 27 2TH ST. NW P.O. BOX 89 WEST FARGO, ND PH: FAX: (70) Manufactured in the United States of America by Crary Industries

Honey Bee. New Holland

Honey Bee. New Holland PARTS MANUAL CRARY WIND SYSTEM Honey Bee Grain Belt Grain Belt PLUS New Holland 88C 9C Manual P/N 5292-00 Rev. 06009 Companion to P/N 529-00 SN Range: 807669-A0265 HOW TO REACH US ADDRESS HOURS TELEPHONE