PARTS MANUAL crary WIND SYSTEM

Transcription

1 PARTS MANUAL crary WIND SYSTEM Manual PN R Companion to lexion F25, F30, f535 MAX FLEX, F540 MAX FLEX

2 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER INTERNET Crary Industries th St. NW P.O. Box 849 West Fargo, ND Mon. - Fri. 8 A.M to 5 P.M. Central Time For Parts and Service: Fax: For Service: serv@crary.com Visit us on the Send us Your Warranty Card Please take time to fill in the information requested on the card. When you send in the completed card to us, we register your Crary Wind System and start coverage under our limited warranty. Two serial number stickers are included with each CWS. The decals are located on the CWS manifold. Place one sticker on the warranty registration card and mail it back to Crary Industries. Place the second sticker in the owner s manual for future reference.

3 Parts ordering information For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Crary Wind System to provide the most efficient service. See information below for how to identify and record the serial number for your Air Reel. ILLUSTRATION AND TEXT This parts catalog is arranged to assist in identifying CWS parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information on the right. Except for some common hardware, all parts are identified with an item number that corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the CWS. Crary replacement parts are available from your Crary Dealer. To obtain prompt, efficient service, remember to give the dealer the correct part description and serial number of the CWS. When ordering parts for your unit provide the following: 1. The SERIAL NUMBER of your CWS. 2. The PART NUMBER of the part. 3. The PART DESCRIPTION. 4. The QUANTITY needed. Serial number location WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on this unit. Give your authorized Crary dealer the serial number of your CWS when ordering parts, requesting service, or any other information. Record the serial number in the space provided below and on the warranty and registration card. The serial number is located on the manifold. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Page

4 SECTION Contents PAGE AIR MANIFOLD (25 HEADERS) AIR MANIFOLD (30-40 HEADERS) DRIVELINE/C FLANGE ASSEMBLY (LH DRIVE KITS) DRIVELINE/C FLANGE ASSEMBLY (RH DRIVE KITS) DRIVELINE, SECONDARY (LH DRIVE KITS) DROP TUBE KIT FAN HOSE ASSEMBLY (25-30 HEADERS) FAN HOSE ASSEMBLY (35 HEADERS) FAN HOSE ASSEMBLY (RH) (35-40 HEADERS) FAN HOSE ASSEMBLY (LH) (40 HEADERS) GEARBOX/FAN (LEFT HAND) GEARBOX/FAN (RIGHT HAND) GEARBOX MOUNT/DRIVE KIT (25-30 HEADERS)... 6 GEARBOX MOUNT/DRIVE KIT (35-40 HEADERS)... 7 GEARBOX MOUNT/NEUTRAL DRIVE SHAFT (40 HEADERS)... 8 GEARBOX REPLACEMENT PARTS LEFT HAND DRIVE KIT (40 HEADERS) REEL ARM MOUNT (CENTER) (40 HEADERS) REEL ARM MOUNT (LH) (25-30 HEADERS) REEL ARM MOUNT (LH) (35-40 HEADERS) REEL ARM MOUNT (RH) (25-30 HEADERS) REEL ARM MOUNT (RH) (35-40 HEADERS) RIGHT HAND DRIVE KIT (25 HEADERS) RIGHT HAND DRIVE KIT (30 HEADERS) RIGHT HAND DRIVE KIT (35-40 HEADERS) SWITCH/MOUNT PLATE ASSEMBLY... 51

5 Parts Catalog Crary Wind System Lexion Headers F25, F30, F535 MAX FLEX, F540 MAX FLEX Page

6 GEARBOX MOUNt/DRIVE kit HEADERS 07/07 GEARBOX MOUNT/DRIVE KIT (25672) ITEM PART NUMBER DESCRIPTION QTY BUSHING, 1-3/8 SD BOLT, 1/2 X 1 HEX HD BOLT, 1/2 X 1-1/4 HEX HD WASHER, 1/2 SAE FLAT BOLT, 5/16 X 1-1/2 GR5 HEX CPS ZP KEY, 5/16 X 1-3/4 SQUARE WELDMENT, SHIELD PLATE, GEARBOX MOUNT 1 Page

7 07/ HEADERS GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT/DRIVE KIT (29133) ITEM PART NUMBER DSECRIPTION QTY BUSHING, 1-3/8 SD BOLT, 1/2 X 1 HEX HD BOLT, 1/2 X 1-1/4 HEX HD WASHER, 1/2 SAE FLAT BOLT, 5/16 X 1-1/2 GR5 HEX CPS ZP KEY, 5/16 X 1-1/2 SQUARE WELDMENT, SHIELD PLATE, GEARBOX MOUNT 1 Page

8 GEARBOX MOUNT/ NEUTRAL DRIVE SHAFT 40 HEADERS 07/07 Page

9 07/07 40 HEADERS GEARBOX MOUNT/ NEUTRAL DRIVE SHAFT GEARBOX MOUNT/DRIVE KIT (29874) ITEM PART NUMBER DESCRIPTION QTY RH GEARBOX/FAN (7.269:1) GBOX DRIVE LH SHIELD GBOX DRIVE RH SHIELD HINGE, SHIELD BRACKET, GEARBOX MT BOLT, 1/2 X 1-1/4 SERRATED FLANGE BOLT, 5/16 NC X 6-1/2 GR5 HCS ZP NUT, 5/16 NE NYLOCK ZP WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP BOLT, 1/2 X 1 GR5 HEX CAPSCREW ZP LATCH, FLEXIBLE DRAW SCW, MCH X 1/2 PAN HD, PH ZP BOLT, X 3/4 HHCS G8 PLAIN NUT, 10/24 NYLOCK TYPE NM, ZP 8 OPTIONAL NEUTRAL DRIVE SHAFT KIT (29884) ITEM PART NUMBER DESCRIPTION QTY WASHER, 3/8 SAE FLAT NUT, 3/8 NYLOCK FLANGETTE, 72MSI 1-3/ BEARING, 1-3/8 ROUND BORE BOLT, 3/8 X 1 CRG SHAFT, 1-3/8 S SPLINE STUB 1 Page

10 RIGHT HAND DRIVE KIT 25 HEADERS 07/07 Page 10

11 07/07 25 HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, 25 HEADERS (25674) ITEM PART NUMBER DESCRIPTION QTY BOLT, 5/16 X 3/4 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERRATED FLANGE BOLT, 3/8 X 1 CARRIAGE NUT, 5/16 HEX BOLT, 5/16 X 1 HEX HD WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE BEARING, 1-3/8 ROUND BORE FLANGETTE, 72MS 1-3/ DRIVESHAFT SHIELD (22 ) DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) SHIELD MOUNT PLATE ASSEMBLY BOLT, M MM GR. 8.8 HWHCS YZP SHIELD, SLIP CLUTCH DRIVELINE SUPPORT BRACKET DRIVESHAFT BEARING MOUNT BRACKET MOUNT SUPPORT BRACKET NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 11

12 RIGHT HAND DRIVE KIT 30 HEADERS 07/07 Page 12

13 07/07 30 HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, 30 HEADERS (25675) ITEM PART NUMBER DESCRIPTION QTY BOLT, 5/16 X 3/4 HEX HD WASHER, 3/8 FLAT NUT, 3/8 SERRATED FLANGE BOLT, 3/8 X 1 CARRIAGE NUT, 5/16 HEX BOLT, 5/16 X 1 HEX HD WASHER, 5/16 FLAT KEY, 5/16 X 1-3/4 SQUARE BEARING, 1-3/8 ROUND BORE FLANGETTE, 72MS 1-3/ DRIVESHAFT SHIELD DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) SHIELD MOUNT PLATE ASSEMBLY BOLT, M MM GR. 8.8 HWHCS YZP SHIELD, SLIP CLUTCH DRIVELINE SUPPORT BRACKET DRIVESHAFT BEARING MOUNT BRACKET MOUNT SUPPORT BRACKET NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 13

14 RIGHT HAND DRIVE KIT HEADERS 07/07 Page 14

15 07/ HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, HEADERS ITEM PART NUMBER DESCRIPTION 35 (29785) QTY BOLT, 5/16 X 3/4 GR5 HEX HD ZP BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP BOLT, CARR 3/8 X 1 GR5 NC ZP WASHER, 1/2 SAE FLAT ZP WASHER, 5/16 FLAT ZP WASHER, 3/8 SAE FLAT ZP BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP NUT, 3/8 NE NYLOCK ZP KEY, 5/16 X 1-1/2 SQUARE BEARING 1 3/8, INSERT FLANGETTE, 72MS RND 3BIT ZP DRIVELINE/C FLANGE ASSEMBLY-L (SEE PAGES 24-25) SHIELD MOUNT PLATE ASSEMBLY DRIVESHAFT SHIELD TUBE, LG DRIVESHAFT SHIELD TUBE, SLIP CLUTCH SHIELD BEARING MOUNT PLATE BEARING BRACKET MOUNT DRIVESHAFT (CAT- 40 RH) DRIVESHAFT (CAT-35 RH) DRIVESHAFT SHIELD TUBE, SM DRIVESHAFT SHIELD TUBE, PTO HOLDER WELDMENT (29139) QTY Page 15

16 LEFT hand drive kit 40 HEADERS 07/07 Page 16

17 07/07 40 HEADERS LEFT HAND DRIVE KIT LH DRIVE KIT (29138) ITEM PART NUMBER DESCRIPTION QTY BEARING 1 3/8, INSERT BEARING MOUNT PLATE FLANGETTE, 72MS RND 3BIT ZP NUT, 3/8 NE NYLOCK ZP WASHER, 3/8 SAE FLAT ZP BOLT, CARR 3/8 X 1 GR5 NC ZP NUT, 3/8 SERRATED FLANGE NC ZP SICKLE/AUGER DRIVE SHAFT LEXION SLIP CLUTCH SHIELD SHIELD MOUNT ASSEMBLY BEARING BRACKET MOUNT WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP NUT, 5/16-18 TINNERMAN U-TYPE BOLT, 5/16 X 3/4 GR5 HEX HD ZP WASHER, 5/16 FLAT ZP DRIVELINE, HEADER SECONDARY (SEE PAGES 28-29) DRIVELINE/CLUTCH 1-3/8 ASSEMBLY (SEE PAGES 26-27) DRIVESHAFT SHIELD Page 17

18 GEARBOX/FAN (RIGHT HAND) ALL MODELS 07/07 Page 18

19 07/07 ALL MODELS GEARBOX/FAN (RIGHT HAND) RH GEARBOX/FAN ASSEMBLY, 7.269:1 (22757) ITEM PART NUMBER DESCRIPTION QTY GEARBOX, FAR 7.269:1 (SEE PAGES 22-23) HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) BOLT, 1/2 X 1-1/2 HEX HD NUT, 1/2 CENTERLOCK GRB ZP FAN RH SIDE W/ BUTTERFLY BOLT, 3/8 X 1 THREAD CUT WASHER, 7/8 SAE FLAT FAN ROTOR, 16.5 X 3 CW, 7/8 STL WASHER, 3/4 SAE FLAT NUT, 3/4 NF CASTLE PIN, 5/32 X 1-1/4 COTTER FAN LH SIDE W/ BUTTERFLY BOLT, 3/8 NC X 1-1/4 HEX HD NUT, 3/8 SERR FLANGE BASE WELDMENT, BASE STRAP BEARING, 5/8 2-BOLT FLNG BOLT, 1/4 X 3/4 CRG WELDMENT, SCREEN/BLADE WASHER, 5/8 SAE FLAT WELDMENT, PIVOT WELDMENT, SCREEN CLEANER WELDMENT, SCREEN CAP NUT, 1/4 SERR FLANGE BOLT, 1/4 X 3/4 HEX HD SCREW, NO. 14 X 1/2 TAPPING HWH ZP KEYSTOCK, 3/ WELDMENT, ACTUATOR MOUNT WELDMENT, VALVE ACTUATOR WELDMENT, INDICATOR PLATE, LARGE BUTTERFLY BOLT, #10-24 X 1 IN GR8 HCPS PLAIN NUT, #10X24 NYLOCK ACTUATOR, 2 STROKE WARNER BOLT, 1/4 X 1-1/2 HCS G5 ZP NUT, 1/4 CENTERLOCK WRAP, ROTARY SCREEN 1 Page 19

20 GEARBOX/FAN (LEFT HAND) 40 HEADERS 07/07 Page 20

21 07/07 40 HEADERS GEARBOX/FAN (LEFT HAND) LH GEARBOX/FAN ASSEMBLY, 7.269:1 ITEM PART NUMBER DESCRIPTION QTY BUSHING, 1-3/8 SD ACTUATOR, 2 STROKE WARNER BOLT, 1/4 X 3/4 HEX HD BOLT, 1/2 X 1-1/2 HEX HD NUT, 1/2 CENTERLOCK GRB ZP NUT, 3/8 SERR FLANGE NUT, 1/4 SERR FLANGE NUT, HST SPINDLE CASTLE PIN, 5/32 X 1-1/4 COTTER BOLT, 3/8 X 1 THREAD CUT NUT, 1/4 CENTERLOCK SCREW, NO. 14X1/2 TAPPING HWH ZP WASHER, 7/8 SAE FLAT WASHER, 5/8 SAE FLAT BOLT, 1/4 X 3/4 CRG BOLT, 1/4 X 1-1/2 HCS G5 ZP BOLT, 3/8 NC X 1-1/4 HEX HD NUT, #10X24 NYLOCK KEY, 5/16 X 1-3/4 SQ BOLT, #10-24 X 1 IN. GR8 HCPS PLAIN THRUST WASHER, 3/4 X 1-5/16 X BEARING, 5/8 2-BOLT FLNG FAN ROTOR, 16.5 X 3 CCW, 7/8 STL FAN RH SIDE W/ BUTTERFLY FAN LH SIDE W/ BUTTERFLY PLATE, LARGE BUTTERFLY HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) GEARBOX, FAR 7.269:1 (SEE PAGES 44-45) BASE WELDMENT, BASE STRAP WELDMENT, PIVOT WELDMENT, SCREEN CLEANER WELDMETN, SCREEN CAP WRAP, ROTARY SCREEN WELDMENT, INDICATOR WELDMENT, ACTUATOR MOUNT WELDMENT, LH VALVE ACTUATOR WELDMENT, SCREEN/BLADE (8 - LH) SHAFT, 1-3/8 6 SPLINE STUB KEYSTOCK, 3/ QTY Page 21

22 GEARBOX REPLACEMENT PARTS ALL MODELS 07/07 Page 22

23 07/07 ALL MODELS GEARBOX REPLACEMENT PARTS GEARBOX REPLACEMENT PARTS (22323) ITEM PART NUMBER DESCRIPTION QTY 1 NPN 66 GEAR, SP BEV LH 19T 1 2 NPN 66 GEAR, SP BEV RH 29T 1 3 NPN 11 NUT, LOCK 3/4 NF 1 4 NPN 66 SHIM,.002 RED 2 5 NPN 66 SHIM,.005 BLUE 2 6 NPN SPEC HOUSING, SUBASSEMBLY 1 7 NPN SPEC HOUSING, PINION 1 8 NPN SPEC CAP, OPEN 2 9 NPN SPEC CAP, CLOSED SPEC SLEEVE, INPUT SPEC SHAFT, OUTPUT 1 12 NPN SPEC GEAR, INTG HEL LH 14T 1 13 NPN SPEC GEAR, HEL RH 81T 1 14 NPN SPEC SPACER 1 15 NPN SPEC SHIM,.002 RED 4 16 NPN SPEC SHIM,.005 BLUE 4 17 NPN SPEC SHIM,.002 RED 4 18 NPN SPEC SHIM,.005 BLUE BEARING, BALL 206NPP OR EQ BEARING, X.465 CUP BEARING, CUP BEARING, X.660 CONE BEARING, CONE 2 24 NPN SCREW, HEX CAP GR5 3/8NC X NPN SCREW, HEX CAP GR5 5/16NC X NPN SCREW, HEX CAP GR5 3/8NC X 1-1/ NPN WASHER, 3/4 X 1-1/2 X 1/ NPN WASHER, 1-17/64 X 1-3/4 X 1/ NPN NUT, HEX 3/8NC 8 30 NPN KEY, P&W 1/4SQ X 15/ NPN KEY, SQ END 3/4SQ X 15/ NPN KEY, WOODRUFF 1/4 X RING, RETAINING NPN RING, BEVELED RET. N NPN OIL, MOBILUBE SHC 75W NPN NAME PLATE, CRARY 1 37 NPN PAINT, FLAT BLACK NPN PLUG, PIPE SOCKET 1/4NPT 2 39 NPN PLUG, PIPE 1/2 O-RING BOXX 3 40 NPN PLUG, VENTED 1/8NPT, 1-5 PSI BALL 1 41 NPN SEAL, OR EQ 1 42 NPN SEAL, OR EQ 2 43 NPN O-RING, NPN O-RING, NPN ORING, NPN SCREW, HEX CAP GR5 5/16NC X 3/ NPN TAG, LUBRICATION GEARBOX SEAL & SHIM KIT (NOT SHOWN) GEARBOX, REBUILT (7.269:1) (NOT SHOWN) 1 Page 23

24 DRIVELINE/C FLANGE ASSEMBLY RH DRIVE KITS 07/07 Page 24

25 07/07 RH DRIVE KITS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE/C-FLANGE ASSEMBLY (24034) ITEM PART NUMBER DESCRIPTION QTY COUNTER FLANGE, 1-3/8", 21 SPLINE, W/QD SCREW, 3/8" X 1" SQUARE HEAD SET BOLT, 5/16" X 1" HHCS NC GR5 ZP SCREW, 3/8" X 3/4" SQUARE HEAD SET ZP NUT, 5/16" NE NYLOCK ZP HEADER DRIVELINE W/CLUTCH (L) (SEE TABLE BELOW) 1 WALTERSCHEID DRIVELINE SERVICE PARTS ITEM PART NUMBER DESCRIPTION QTY KIT, CROSS AND BEARING W CHAIN, SHAFETY DECAL, OUT DECAL, IN YOKE, INBOARD 1B YOKE, INBOARD 2A CONE, 6 RIB SAFETY RING, SC25, BEARING YOKE, FLANGE CLUTCH, FRICTION 1 A SPRING, BELVILLE (WALTERSCHEID) 1 B SET, FRICTION DISC (WALTERSCHEID) 1 C YOKE, FLANGE 1 D HUB, CLUTCH 1 E PLATE, THRUST 1 F NUT, M10 X 1.5 HEX NYLOCK TYP NE YZP 6 G BOLT, M10 X 1.5 X 50 CLASS 8.8 HCPS 6 H BOLT, M12 X 1.75 X 65 CLASS 8.8 HCPS 1 J NUT, M12 X 1.75 HEX NYLOCK TYPE NE YZP PROFILE, INNER 1B, (SHORT) PROFILE, INNER 1B, (LONG) 1 PROFILE, INNER 1B, (MEDIUM) PROFILE, OUTER 2A, (SHORT) PROFILE, OUTER 2A, (LONG) 1 PROFILE, OUTER 2A, (MEDIUM) TUBE, INNER SHIELD, (SHORT) TUBE, INNER SHIELD, (LONG) 1 TUBE, INNER SHIELD, (MEDIUM) TUBE, OUTER SHIELD, (SHORT) TUBE, OUTER SHIELD, (LONG) 1 TUBE, OUTER SHIELD, (MEDIUM) PIN, M10 X 80, SPRING 2 Page 25

26 DRIVELINE/C FLANGE ASSEMBLY LH DRIVE KITS 07/07 Page 26

27 07/07 LH DRIVE KITS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE/C-FLANGE ASSEMBLY ( ) ITEM PART NUMBER DESCRIPTION QTY COUNTER FLANGE, 1-3/8 21 SPLINE BOLT, 5/16 X 1 GR5 HHCS NC ZP NUT, 5/16 NE NYLOCK ZP ASSEMBLY, DRIVELINE/CLUTCH 1-3/8 6 SPLINE (SEE TABLE BELOW) 1 ASSEMBLY DRIVELINE/CLUTCH 1-3/8 6 SPLINE ( ) ITEM PART NUMBER DESCRIPTION QTY KIT, CROSS AND BEARING W SAFETY CHAIN YOKE, INBOARD S YOKE, INBOARD S CONE, 6 RIB SAFTEY RING, SC25 BEARING YOKE, FLANGE CLUTCH, FRICTION 1 A SPRING, BELVILLE (WSCHIED) 1 B SET, FRICTION DISC 1 C YOKE, FLANGE 1 D PLATE, THRUST 1 E HUB, CLUTCH 1 F BACK-UP RING 1 G BALL, CLUTCH 3 H SPRING, COMPRESSION 1 I COLLAR, LOCK 1 J RING, BACKUP 1 K RING, SNAP 1 L NUT, M10 X 1.5 HEX NYLOCK TYPE NE 6 M BOLT, M10 X 1.5 X 50 CLASS 8.8 HC PROFILE, INNER S4LGA PROFILE, OUTER S5L TUBE, INNER SHIELD ROUND TUBE, OUTER SHIELD OVAL PIN, M10 X 80 SPRING DECAL, OUT DECAL, IN 1 Page 27

28 DRIVELINE, SECONDARY LH DRIVE KITS 07/07 Page 28

29 07/07 LH DRIVE KITS DRIVELINE, SECONDARY DRIVELINE, HEADER SECONDARY ( ) ITEM PART NUMBER DESCRIPTION QTY YOKE, 1-3/8 6 SPLINE TUBE, INNER SHIELD RND TUBE, OUTER SHIELD OVAL PROFILE, OUTER PROFILE, INNER OV DECAL, OUT KIT, CROSS AND BEARING W PIN, M10 X 65 SPRING CHAIN, SAFETY RING, SC15 BEARING CONE, 5 RIB SHIELD YOKE, INBOARD YOKE, INBOARD OV SCREW, WS (NOT SHOWN) DECAL, IN (NOT SHOWN) 1 Page 29

30 FAN HOSE ASSEMBLY HEADERS 07/07 Page 30

31 07/ HEADERS FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY (25-30 HEADERS) ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER-8 X 45 DEG WASHER, 3/8 FLAT ZP BOLT, 3/8 X 2-1/2 GR5 HHCS ZP NUT, 5/16 SERR FLANG NC ZP NUT, 3/8 NE NYLOCK ZP WASHER, 5/16 SAE FLAT ZP T-BOLT, CLAMP T-BOLT, CLAMP 8-11/ MANIFOLD ELBOW, -8 (MR) FLEX HOSE 8 ID X 8FT BAND, ELBOW SUPPORT U-BOLT, 5/16-18 X 8.19 X MANIFOLD 15-20FT. HEADER/END TUBE MOUNT WELDMENT 2 Page 31

32 FAN HOSE ASSEMBLY 35 HEADERS 07/07 Page 32

33 07/07 35 HEADERS FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY (35 HEADERS) ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER-8 X 45 DEG BOLT, 5/16 X 1 GR5 HHCS NC ZP WASHER, 5/16 FLAT ZP NUT, 5/16 NE NYLOCK ZP T-BOLT CLAMP 8-3/ T-BOLT CLAMP 8-11/ MANIFOLD ELBOW -8 (MR) FLEX HOSE 8 ID X 8FT BAND, ELBOW SUPPORT HOSE CONNECTOR WELDMENT HOSE, 8 X 4FT. FLEX PLATE, EXTENDER 1 Page 33

34 FAN HOSE ASSEMBLY (RH) HEADERS 07/07 Page 34

35 07/ HEADERS FAN HOSE ASSEMBLY (RH) RH FAN HOSE ASSEMBLY (35-40 HEADERS) ITEM PART NUMBER DESCRIPTION QTY ELBOW, RUBBER -8 X 45 DEG WASHER, 3/8 FLAT ZP BOLT, 5/16 X 1 GR5 HHCS NC ZP NUT, 5/16 NE NYLOCK ZP NUT, 3/8 NE NYLOCK ZP WASHER, 5/16 SAE FLAT ZP T-BOLT CLAMP 8-3/ T-BOLT CLAMP 8-11/ MANIFOLD ELBOW -8 (MR) FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) T-BOLT CLAMP 8-3/ FLEX HOSE 8 ID X 8FT BAND, ELBOW SUPPORT U-BOLT, 5/16-18 X 8.19 X MANIFOLD 15-20FT. HEADER/END TUBE MOUNT WELDMENT BRACKET, TUBE MOUNT HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) CLAMP, HALF GUIDE, SADDLE TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) GUIDE, SADDLE TUBE MOUNT WELDMENT BOLT, 1/2 X 4-1/2 GR5 HHCS NC ZP WASHER, 1/2 FLAT ZP BOLT, CARR 3/8 X 1-1/4 GR5 NC ZP NUT, 1/2-13 UNC NYLOCK BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 2 Page 35

36 FAN HOSE ASSEMBLY (LH) 40 HEADERS 07/07 Page 36

37 07/07 40 HEADERS FAN HOSE ASSEMBLY (LH) LH FAN HOSE ASSEMBLY (40 HEADERS) ITEM PART NUMBER DESCRIPTION QTY WASHER, 3/8 FLAT ZP BOLT, 5/16 X 1 GR5 HHCS NC ZP NUT, 5/16 NE NYLOCK ZP NUT, 3/8 NE NYLOCK ZP WASHER, 5/16 SAE FLAT ZP T-BOLT CLAMP 8-3/ T-BOLT CLAMP 8-11/ MANIFOLD ELBOW -8 (MR) FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) T-BOLT CLAMP 8-3/ FLEX HOSE 8 ID X 8FT BAND, ELBOW SUPPORT U-BOLT, 5/16-18 X 8.19 X MANIFOLD 15-20FT. HEADER/END TUBE MOUNT WELDMENT BRACKET, TUBE MOUNT HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) CLAMP, HALF GUIDE, SADDLE TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) GUIDE, SADDLE TUBE MOUNT WELDMENT BOLT, 1/2 X 4-1/2 GR5 HHCS NC ZP WASHER, 1/2 FLAT ZP BOLT, CARR 3/8 X 1-1/4 GR5 NC ZP NUT, 1/2-13 UNC NYLOCK BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 2 Page 37

38 REEL ARM MOUNT (LH) HEADERS 07/07 Page 38

39 07/ HEADERS REEL ARM MOUNT (LH) REEL ARM MOUNT KIT, HEADERS (27982) ITEM PART NUMBER DESCRIPTION QTY BOLT, 3/8 X 1-1/2 GR5 NC ZP BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP WASHER, 3/8 FLAT ZP BOLT, CARR 3/8 X 1 GR5 NC ZP BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 3-1/4 HCS GR5 ZP BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP NUT, 3/8 NE NYLOCK ZP BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP T-BOLT, CLAMP 8-3/ TUBE, CAP ELECTRIC ACTUATOR PIVOT CLAMP ASSEMBLY BRACE CLAMP GUIDE, SADDLE HALF CLAMP NUT, 1/2-13 UNC NYLOCK BOLT, 1/2 X 1-1/2 HEX HD GR5 ZP STRAP, ADJUSTMENT TUBE, ARM MOUNT (CIH, GLEANER) LH, REEL MT. WELDMENT (CIH, CWS) LH, REEL ARM WELDMENT (CAT, CWS) 1 Page 39

40 REEL ARM MOUNT (RH) HEADERS 07/07 Page 40

41 07/ HEADERS REEL ARM MOUNT (RH) REEL ARM MOUNT KIT, HEADERS (27982) ITEM PART NUMBER DESCRIPTION QTY BOLT, 3/8 X 1-1/2 GR5 NC ZP BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP WASHER, 3/8 FLAT ZP BOLT, CARR 3/8 X 1 GR5 NC ZP BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 3-1/4 HCS GR5 ZP BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP NUT, 3/8 NE NYLOCK ZP BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP ELECTRIC ACTUATOR BRACE CLAMP GUIDE, SADDLE HALF CLAMP NUT, 1/2-13 UNC NYLOCK BOLT, 1/2 X 1-1/2 HEX HD GR5 ZP STRAP, ADJUSTMENT TUBE, ARM MOUNT (CIH, GLEANER) RH, REEL MT. WELDMENT (CIH, CWS) RH, REEL ARM BRACKET (CAT) 1 Page 41

42 REEL ARM MOUNT (LH) HEADERS 07/07 Page 42

43 07/ HEADERS REEL ARM MOUNT (LH) REEL ARM MOUNT KIT, 35 (29783) - 40 (29970) HEADERS ITEM PART NUMBER DESCRIPTION QTY BOLT, 3/8 X 2-1/2 GR5 HHCS ZP BOLT, 1/2 X 1 GR5 HEX CPSCREW ZP BOLT, 1/2 X 2-1/4 HEX GR5 ZP WASHER, 3/8 SAE FLAT ZP BOLT, CARR 3/8 X 1 GR5 NC ZP BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP NUT, 3/8 NE NYLOCK ZP BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP T-BOLT, CLAMP 8-3/ TUBE, CAP ELECTRIC ACTUATOR PIVOT CLAMP ASSEMBLY BRACE CLAMP GUIDE, SADDLE HALF CLAMP NUT, 1/2-13 UNC NYLOCK TUBE, ARM MOUNT (CIH, GLEANER) LH, REEL MT. WELDMENT (CIH, CWS) STRAP, ADJUSTMENT WELDMENT, REEL ARM MOUNT (LEXION) 1 Page 43

44 REEL ARM MOUNT (RH) HEADERS 07/07 Page 44

45 07/ HEADERS REEL ARM MOUNT (RH) REEL ARM MOUNT KIT, 35 (29783) - 40 (29970) HEADERS ITEM PART NUMBER DESCRIPTION QTY BOLT, 3/8 X 2-1/2 GR5 HHCS ZP BOLT, 1/2 X 1 GR5 HEX CPSCREW ZP WASHER, 3/8 SAE FLAT ZP BOLT, CARR 3/8 X 1 GR5 NC ZP WASHER, 1/2 SAE FLAT ZP BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP NUT, 3/8 NE NYLOCK ZP BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP BRACE CLAMP GUIDE, SADDLE HALF CLAMP NUT, 1/2-13 UNC NYLOCK TUBE, ARM MOUNT (CIH, GLEANER) RH, REEL MT. WELDMENT (CIH, CWS) STRAP, ADJUSTMENT WELDMENT, REEL ARM MOUNT (LEXION) 1 Page 45

46 REEL ARM MOUNT (CENTER) 40 HEADERS 07/07 Page 46

47 07/07 40 HEADERS REEL ARM MOUNT (CENTER) REEL ARM MOUNT KIT, 40 HEADERS (29970) ITEM PART NUMBER DESCRIPTION QTY T-BOLT CLAMP 8-11/ CLAMP, HALF REEL MOUNT WELDMENT NUT, 3/8 NE NYLOCK ZP BOLT, CARR 3/8 X 1 GR5 NC ZP STRAP, CENTER ADJUSTMENT CENTER SPACER WELDMENT TUBE, ARM MOUNT BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP BOLT, 3/8 X 4-1/2 HHCS GR5 NC ZP WASHER, 3/8 SAE FLAT ZP WASHER, 1/2 SAE FLAT ZP NUT, 3/8 CENTERLOCK ZP WASHER, 1/2 FLAT ZP BOLT, 1/2 X 3-1/2 GR5 HEX HD ZP BOLT, 1/2 X 3-1/2 GR5 HEX HD BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP NUT, 1/2-13 UNC NYLOCK REEL ARM MOUNT CENTER WELDMENT GUIDE, SADDLE 2 Page 47

48 AIR MANIFOLD 25 HEADERS 07/07 25 CWS MANIFOLD ASSEMBLY (12 SPACING) (25933) ITEM PART NUMBER DESCRIPTION QTY MANIFOLD, 25 FT. CWS (12 ) DECAL, CWS LOGO (YELLOW) 1 Page 48

49 07/ HEADERS AIR MANIFOLD CWS MANIFOLD ASSEMBLY (12 SPACING) ITEM PART NUMBER DESCRIPTION WELDMENT, 30 FT. CWS RH/LH MANIFOLD (12 ) 1 30 FT. (27500) QTY WELDMENT, 35 FT. CWS RH/LH MANIFOLD (12 ) 1 35 FT. (27247) QTY WELDMENT, 40 FT. CWS RH/LH MANIFOLD (12 ) ASSEMBLY, 30 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) WELDMENT, 30 FT. CWS CENTER MANIFOLD (12 ) DECAL, CWS LOGO (YELLOW) PLATE, CONNECTOR/BAFFLE BOLT, 3/8 X 1-1/2 GR5 HCS ZP NUT, 3/8 NE NYLOCK ZP ASSEMBLY, 35 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) WELDMENT, 35 FT. CWS CENTER MANIFOLD (12 ) DECAL, CWS LOGO (YELLOW) PLATE, CONNECTOR/BAFFLE BOLT, 3/8 X 1-1/2 GR5 HCS ZP NUT, 3/8 NE NYLOCK ZP ASSEMBLY, 40 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) 1 40 FT. (29967) QTY WELDMENT, 40 FT. CWS CENTER MANIFOLD (12 ) DECAL, CWS LOGO (YELLOW) PLATE, CONNECTOR/BAFFLE BOLT, 3/8 X 1-1/2 GR5 HCS ZP NUT, 3/8 NE NYLOCK ZP 1 Page 49

50 DROP TUBE KIT ALL MODELS 07/07 DROP TUBE KIT ITEM PART NUMBER DESCRIPTION LONG (25920) QTY NUT, 5/16 SERRATED FLANGE NC ZP WASHER, 5/16 SAE FLAT ZP U-BOLT, 5/16-18 X 8.19 X WELDMENT, SHORT AIR TUBE WELDMENT, LONG AIR TUBE 1 SHORT (25919) QTY Page 50

51 07/07 ALL MODELS SWITCH/MOUNT PLATE SWITCH/MOUNT PLATE ASSEMBLY (24333) ITEM PART NUMBER DESCRIPTION QTY DECAL, ACTUATOR SWITCH SWITCH, ELECTRIC 3P COL ELECTRIC SWTICH ASSEMBLY - SPLIT 6 AMP ELECTRIC SWITCH ASSEMBLY - SPLIT 15 AMP PLATE, SWITCH MOUNT 1 Page 51

52

53

54

55

56 237 12TH ST. NW P.O. BOX 849 WEST FARGO, ND (701) (701) Manufactured in the United States of America by Crary Industries