PNEUMATIC DOUBLE ACTING QUARTER TURN SCOTCH-YOKE ACTUATOR
|
|
- Fay Palmer
- 5 years ago
- Views:
Transcription
1 PNEUMATI OUBLE ATING QUARTER TURN SOTH-YOKE ATUATOR series RJP-RSP-RWP-RP SERVOVALVE spa Via Quasimodo S.STEFANO TIINO (MI) PHONE: FAX : servovalve@servovalve.it RJP - RSP - RWP - RP Rev. 2/10
2 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP - RWP - RP ESRIPTION All the Servovalve series of quarter-turn scotch-yoke actuators are desined and manufactured for the transmission of hih torque suited for ball or butterfly valves, plu etc. for on-off or throttlin service. The desin, enineerin and materials used in construction ensure optimum performance in the heaviest work condition in every environment accordin to the international standard specifications. In the central housin a quarter turn scotch-yoke kinematism transforms the linear thrust of a double actin pneumatic cylinder in a torque to the valve shaft. A series of central housin can be equipped with a wide rane of pneumatic cylinders allowin the best choice accordin to the air workin pressure and the requested torque. The central housin is desined to accept different types of scotch-yoke mechanisms (symmetric, series RJP and RSP or canted, series RWP and RP) to allow the choice of the best actuator performance for every kind of valve. SYMMETRIAL SOTH-YOKE RJP and RSP series are available for the on-off or throttlin valves in which it is requested an exalted torque durin all the valve shaft runnin. SYMMETRI SOTH YOKE ANTE SOTH-YOKE RWP and RP series are ideally suited for the valves where it is requested an exalted torque in a specific final position (enerally closed position or failure position) compared to the run and the opposite initial position. ANTE SOTH YOKE (typical output torque diaram with symmetrical scotch-yoke) (typical output torque diaram with canted scotch-yoke) servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-1 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
3 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP - RWP - RP MAIN ESIGN FEATURES The actuators have a modular construction desin. All actuators have a totally enclosed module that provides complete protection for all movin parts, minimises the possibility of internal misalinment, and reduce the chance of injury to operatin personnel. They are realised with a central housin to which a series of standard pneumatic cylinders can be coupled to obtain the best choice in every kind of application. The chromium plated rod, slidin on two PTFE chared bushins, turns the link by means of the cylinder piston and sprin action alternatively to ensure minimum friction and lon service life. The link of the scotch-yoke is driven by two bronze bushins fit in the housin and in the cover All the actuators of the series RP and RSP are equipped with an alloy steel chromium plated bar that supports the transverse loads thrust of the scotch-yoke to assure a reular movement also in a continuous throttlin action. The pneumatic cylinder is inside chromium plated to prevent corrosion in aressive environment and the piston is equipped with a PTFE chared slide to assure a linear drive and alinment under all load conditions allowin a lon life and a perfect tiht by means of two o-rin askets. Link and joint block are connected to two hard bronze alloy slidin rins to allow a low friction factor and minimise wear of movin parts. Field adjustable travel-stop are available in both directions to optimise the required valve stroke. EQUIPMENTS Each execution can be equipped with devices and accessories for the local or remote action and control as: limit switches solenoid valve flow control valve positioner and I/P converter position transmitter air tank for emerency special pneumatic end electric equipment TEST Every detail have been desined and tested with care and is then checked durin the production process (from the receipt of the raw materials to final testin) aainst the strictest reliability criteria required under the ISO EN 9001 quality norm, which has been fully adopted by Servovalve. All finished actuators are tested and certified by the Servovalve quality service before bein released to external testers at the various authorisin bodies and the customer s own inspectors. ERTIFIATION From 1995 Servovalve was awarded certification by international body NV due to its full compliance with Quality Norm EN From 2002 Servovalve actuators can be supplied with the E mark accordin to the 97/23/E directive (PE) and ATEX directive 94/9/ce under the approval of the notified body NV. The central cover is equipped of a standard valve position indicator. SPEIAL EXEUTION Units with particular materials for special environmental conditions (low or hih temperature, aressive medium ect.) can be supplied on request. MANUAL EMERGENY EVIE All series of actuator can be equipped with a manual emerency device as: handwheel manual reductor with handwheel hydraulic cylinder with manual oil pump, tank and relevant equipment servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-2 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
4 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP - RWP - RP TEHNIAL PERFORMANE Pressure rane: Minimum workin pressure: 3 bar Maximum workin pressure: see technical sheet ylinder test pressure: 1,5 max allowable pressure Actuator test: 1,2 actuator max workin pressure On request available for hiher work and test pressure Anular stroke: Turn: 90 +/- 5 Environmental temperature rane: min: -20 max: +80 On request for lower or hiher temperature Operatin medium: air as any medium compatible with standard materials Actuator seals askets: standard: N.B.R. ( ) low temp: fluorosilicone hih temp: viton Paintin: Standard execution has surface protection with: sandblastin 1 primer layer 1 epoxy finish layer On request available other paintin Standard rotation: Without any other indication canted actuators (RWP and RP) are supplied with the max torque at the start rotatin clock-wise (watchin the actuator from the top). Only on request canted actuators are supplied with counterclockwise rotation. SERVIE The Servovalve personnel uarantees prompt assistance to the customer durin the start up of the plant and its normal workin life. MAINTENANE The inner parts of the actuator are life-lubricated, therefore only replacement of the rubber askets may become necessary after a lon workin time as pointed out in the operatin book. SPEIAL ATUATORS Actuator for special performances or for torque requirements reater than shown, please contact our sales department. servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-3 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
5 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP - RWP - RP SOTH YOKE ATUATOR OE MOE MOEL R P M V S / N F B R P ATUATOR TYPE - R rotary actuator SOTH YOKE TYPE - K or W or canted - G or T or J or S symmetric MEIUM - P air or as - O oil or other liquid SINGLE ATING - M sprin (missin for double actin) OPTIONAL EVIE - V handwheel - R reductor - H hydraulic pump - A damper - hydraulic pump and damper - X special execution TYPE OF HOUSING YLINER NOMINAL SIE NUMBER OF YLINER - S sinle - B double TYPE OF SPRING - sprin code (missin for double actin or belleville sprins) TEMPERATURE RANGE - N -20 /+80 - B -40 /+80 - A -50 /+60 - G -60 /+60 - H -20 / S special temperature SPRING ATION - F close - FO open (missin for double actin) OUPLING - B bracket - F flane FUNTION - R modulatin - O on-off ONTROL IRUIT - P included - N not included servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-4 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
6 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP - RWP - RP servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-5 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
7 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RJP - RSP ATUATORS TORQUE SYMMETRI MINIMUM AIR PRESSURE ATUATOR 3,5 bar (50 psi) 4 bar (58 psi) 5 bar (72 psi) 5,5 bar (80 psi) 6 bar (87 psi) TYPE BREAK RUN EN BREAK RUN EN BREAK RUN EN BREAK RUN EN BREAK RUN EN Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm bar lt k PRESS. MAX. AIR ISPLAE APPROX. WEIGHT RJP 900/ RJP 900/ RJP 900/ RJP 900/ RJP 1400/ RJP 1400/ RJP 1400/ RJP 1400/ RSP 2500/ RSP 2500/ RSP 2500/ RSP 2500/ RSP 2500/ RSP 2500/ RSP 2500/ RSP 4500/ RSP 4500/ RSP 4500/ RSP 4500/ RSP 4500/ RSP 4500/ RSP 4500/ RSP 7500/ RSP 7500/ RSP 7500/ RSP 7500/ RSP 7500/ RSP 7500/ RSP../ HIGHER TORQUES ON REQUEST AORING TO USTOMER SPEIFIATION servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-6 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
8 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING SERIES RWP - RP ATUATORS TORQUE ANTE MINIMUM AIR PRESSURE ATUATOR 3,5 bar (50 psi) 4 bar (58 psi) 5 bar (72 psi) 5,5 bar (80 psi) 6 bar (87 psi) TYPE BREAK RUN EN BREAK RUN EN BREAK RUN EN BREAK RUN EN BREAK RUN EN Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm bar lt k PRESS. MAX. AIR ISPLAE APPROX. WEIGHT RWP 900/ RWP 900/ RWP 900/ RWP 900/ RWP 1400/ RWP 1400/ RWP 1400/ RWP 1400/ RP 2500/ RP 2500/ RP 2500/ RP 2500/ RP 2500/ RP 4500/ RP 4500/ RP 4500/ RP 4500/ RP 4500/ RP 4500/ RP 7500/ RP 7500/ RP 7500/ RP 7500/ RP 7500/ RP 7500/ RP../ HIGHER TORQUES ON REQUEST AORING TO USTOMER SPEIFIATION servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-7 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
9 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING TYPE RJP - RWP H2 N "" B (STANAR AIR INLET) ETAIL "" OUPLING BRAKET (ON REQUEST) E S K O ØM I Q H1 Y P ØW ATUATOR IMENSIONS (mm) B E H1 H2 I K L N M O Q S Y RWP 900/ RJP 900/ RWP 1400/ RJP 1400/ ½ NPT ½ NPT L FLANGE IMENSIONS (mm) RWP 900/ RJP 900/ RWP 1400/ RJP 1400/ ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 18 F 16 F 14 F x M ,4 22 F 25 F 16 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-8 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
10 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING TYPE RJP - RWP "B" "A" SETION SETION ETAIL "A" ETAIL "B" POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN OVER GASKET N.B.R. 102 LINK S 275 JR EN O-RING N.B.R. 105 OVER S 275 JR EN PISTON RIVE PTFE+GRAPHITE 108 LINK JOINT 40 EN 10083/2 814 LIP GASKET POLYURETHANE 109 OVER S 275 JR EN BONE SEAL. STEEL/N.B.R. 110 SLIING RING BzAl EN O-RING N.B.R. 112 HROM. SHAFT 42rMo4 EN 10083/1 826 O-RING N.B.R. 117 WASHER W 614 N EN GASKET N.B.R. 118 AP S 275 JR EN O-RING N.B.R. 119 STOP SREW 8.8 EN 898/1 901 BUSHING STEEL/BRONE/TEFLON 130 LINK AP S 275 JR EN BUSHING STEEL/BRONE/TEFLON 201 HEA P 355 NH EN 10028/3 903 BUSHING STEEL/BRONE/TEFLON 202 HEA P 355 NH EN 10028/3 904 BUSHING STEEL/BRONE/TEFLON 204 YLINER (int. chr. plated) E 355 EN 10297/1 905 NUT 6 S EN 20898/2 205 PISTON (till cylinder Ø 420) SAlu3 EN SREW 8.8 EN 898/1 205 PISTON (over cylinder Ø 420) S 275 JR EN SREW 8.8 EN 898/1 209 STAY BOLT 42rMo4 EN SREW 8.8 EN 898/1 301 TUBE S 235 JR EN 10305/1 910 SEEGER ALLOY STEEL 801 O-RING N.B.R. 923 NUT 6 S EN 20898/2 802 O-RING N.B.R. 924 SREW 8.8 EN 898/1 805 O-RING N.B.R. 941 NAMUR PIN AISI 316 STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-9 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
11 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH HANWHEEL TYPE RJPV - RWPV T U N B H2 "" (STANAR AIR INLET) ETAIL "" I ØV ØW H1 O Y Q K OUPLING BRAKET (ON REQUEST) E S P L ATUATOR IMENSIONS (mm) B E H1 H2 I K L N O Q S T U V Y RWPV 900/ RJPV 900/ RWPV 1400/ RJPV 1400/ ½ NPT ½ NPT FLANGE IMENSIONS (mm) RWPV 900/ RJPV 900/ RWPV 1400/ RJPV 1400/ ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 18 F 16 F 14 F x M ,4 22 F 25 F 16 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-10 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
12 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH HANWHEEL TYPE RJPV - RWPV "B" "A" SETION SETION ETAIL "A" ETAIL "B" POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN O-RING N.B.R. 102 LINK S 275 JR EN OVER GASKET N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 108 LINK JOINT 40 EN 10083/2 811 PISTON RIVE PTFE+GRAPHITE 109 OVER S 275 JR EN LIP GASKET POLYURETHANE 110 SLIING RING BzAl EN O-RING N.B.R. 112 HROM. SHAFT 42rMo4 EN 10083/1 818 O-RING N.B.R. 117 WASHER W 614 N EN BONE SEAL. STEEL/N.B.R. 118 AP S 275 JR EN O-RING N.B.R. 119 STOP SREW 8.8 EN 898/1 826 O-RING N.B.R. 130 LINK AP S 275 JR EN GASKET N.B.R. 201 HEA P 355 NH EN 10028/2 832 O-RING N.B.R. 202 HEA P 355 NH EN 10028/2 901 BUSHING STEEL/BRONE/TEFLON 204 YLINER (int. chr. plated) E 355 EN 10297/1 902 BUSHING STEEL/BRONE/TEFLON 205 PISTON (till cylinder Ø 420) SAlu3 EN BUSHING STEEL/BRONE/TEFLON 205 PISTON (over cylinder Ø 420) S 275 JR EN BUSHING STEEL/BRONE/TEFLON 209 STAY BOLT 42rMo4 EN NUT 6 S EN 20898/2 302 INTERNAL FLANGE S 275 JR EN SREW 8.8 EN 898/1 303 SREW THREA FLANGE GS 400/12 EN SREW 8.8 EN 898/1 310 PIN X20r13 EN SREW 8.8 EN 898/1 312 TUBE E 235 SR EN 10305/1 910 SEEGER ALLOY STEEL 313 HANWHEEL E 235 SR EN 10305/1 916 SREW NYLON 314 RIVE NUT W 614 N EN ROLLER BEARING ALLOY STEEL 315 STAY BOLT 40 EN 10083/2 923 NUT 6 S EN 20898/2 316 RING NUT S 275 JR EN OWEL 8.8 EN 898/1 801 O-RING N.B.R. 927 NUT 6 S EN 20898/2 802 O-RING N.B.R. 929 SREW 8.8 EN 898/1 941 NAMUR PIN AISI 316 STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-11 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
13 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL REUTOR TYPE RJPR - RWPR N B H2 A "" (STANAR AIR INLET) ETAIL "" U E H1 O ØR Y S K OUPLING BRAKET (ON REQUEST) P ØV I Q ØW L ATUATOR IMENSIONS (mm) A B E H1 H2 I K L N O Q R S U V Y RWPR 1400/ RJPR 1400/ ½ NPT FLANGE IMENSIONS (mm) RWPR 1400/ RJPR 1400/ ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 22 F 25 F 16 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-12 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
14 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL GEAR TYPE RJPR - RWPR "B" "A" SETION - SETION - ETAIL "A" ETAIL "B" POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN RING NUT 40 EN 10083/2 102 LINK S 275 JR EN O-RING N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 108 LINK JOINT 40 EN 10083/2 805 O-RING N.B.R. 109 OVER S 275 JR EN OVER GASKET N.B.R. 110 SLIING RING BzAl EN O-RING N.B.R. 112 HROM. SHAFT 42rMo4 EN 10083/1 811 PISTON RIVE PTFE+GRAPHITE 117 WASHER W 614 N EN LIP GASKET POLYURETHANE 118 AP S 275 JR EN O-RING N.B.R. 119 STOP SREW 8.8 EN 898/1 819 BONE SEAL. STEEL/N.B.R. 130 LINK AP S 275 JR EN O-RING N.B.R. 201 HEA P 355 NH EN 10028/3 826 O-RING N.B.R. 202 HEA P 355 NH EN 10028/3 827 GASKET N.B.R. 204 YLINER (int. chr. plated) E 355 EN 10297/1 901 BUSHING STEEL/BRONE/TEFLON 205 PISTON (till cylinder Ø 420) SAlu3 EN BUSHING STEEL/BRONE/TEFLON 205 PISTON (over cylinder Ø 420) S 275 JR EN BUSHING STEEL/BRONE/TEFLON 209 STAY BOLT 42rMo4 EN BUSHING STEEL/BRONE/TEFLON 304 TUBE E 235 SR EN 10305/1 905 NUT 6 S EN 20898/2 305 SAFETY BOLT E 235 SR EN 10305/1 906 SREW 8.8 EN 898/1 306 TUBE E 235 SR EN 10305/1 907 SREW 8.8 EN 898/1 308 RIVE NUT AST IRON EN SREW 8.8 EN 898/1 309 PIN 40 EN 10083/2 910 SEEGER ALLOY STEEL 311 AP ALUMINIUM 914 SREW 8.8 EN 898/1 317 INTERNAL FLANGE S 275 JR EN SREW 8.8 EN 898/1 318 EXTERNAL FLANGE S 275 JR EN SREW 8.8 EN 898/1 319 PIN X20r13 EN REUTOR AST IRON EN HANWHEEL E 235 SR EN 10305/1 923 NUT 6 S EN 20898/2 322 HUB 40 EN 10083/2 924 SREW 8.8 EN 898/1 941 NAMUR PIN AISI 316 STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-13 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
15 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL HYRAULI PUMP RJPH - RWPH N B 1H2 6 ETAIL "" 1- ylinder Pump 3 - istributor 4 - Oil tank 5 ØM b 260 Y OUPLING BRAKET (ON REQUEST) H1 Q "" O K P ØW (STANAR AIR INLET) S 5 - Relief valve 6 - By-pass 7 - heck valve I E L ATUATOR IMENSIONS (mm) B E H1 H2 I K L N M O Q S Y RWPH 900/ RJPH 900/ RWPH 1400/ RJPH 1400/ FLANGE IMENSIONS (mm) RWPH 900/ RJPH 900/ RWPH 1400/ RJPH 1400/ ½ NPT ½ NPT ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 18 F 16 F 14 F x M ,4 22 F 25 F 16 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø b - TO BE EFINE H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) ØXH8 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-14 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
16 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL HYRAULI PUMP TYPE RJPH - RWPH "B" "A" SETION SETION ETAIL "A" ETAIL "B" POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN O-RING N.B.R. 102 LINK S 275 JR EN OVER GASKET N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 108 LINK JOINT 40 EN 10083/2 811 PISTON RIVE PTFE+GRAPHITE 109 OVER S 275 JR EN PISTON GASKET POLYURETHANE 110 SLIING RING BzAl EN PISTON RIVE PTFE+GRAPHITE 112 HROM. SHAFT 42rMo4 EN 10083/1 814 LIP GASKET POLYURETHANE 117 WASHER W 614 N EN O-RING N.B.R. 118 AP S 275 JR EN BONE SEAL.STEEL/N.B.R. 119 STOP SREW 8.8 EN 898/1 825 O-RING N.B.R. 130 LINK AP S 275 JR EN O-RING N.B.R. 201 HEA P 355 NH EN 10028/3 827 GASKET N.B.R. 202 HEA P 355 NH EN 10028/3 901 BUSHING STEEL/BRONE/TEFLON 204 YLINER (int. chr. plated) E 355 EN 10297/1 902 BUSHING STEEL/BRONE/TEFLON 205 PISTON (till cylinder Ø 420) SAlu3 EN BUSHING STEEL/BRONE/TEFLON 205 PISTON (over cylinder Ø 420) S 275 JR EN BUSHING STEEL/BRONE/TEFLON 209 STAY BOLT 42rMo4 EN NUT 6 S EN 20898/2 404 YLINER (int. chr. plated) E 355 SR EN 10297/1 906 SREW 8.8 EN 898/1 405 PISTON S 275 JR EN SREW 8.8 EN 898/1 408 FLANGE S 275 JR EN SREW 8.8 EN 898/1 409 FLANGE S 275 JR EN SEEGER ALLOY STEEL 410 STAY BOLT 40 EN 10083/2 923 NUT 6 S EN 20898/2 801 O-RING N.B.R. 925 NUT 6 S EN 20898/2 802 O-RING N.B.R. 941 NAMUR PIN AISI 316 STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-15 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
17 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING TYPE RSP - RP N B E H2 "" (STANAR AIR INLET) ETAIL "" H1 ØW K O Y OUPLING BRAKET (ON REQUEST) I S ØM Q P ØL ATUATOR IMENSIONS (mm) B E H1 H2 I K L M N O Q S Y RSP 2500/ RP 2500/ RSP 4500/ RP 4500/ RSP 7500/ RP 7500/ FLANGE IMENSIONS (mm) RSP 2500/ RP 2500/ RSP 4500/ RP 4500/ RSP 7500/ RP 7500/ ½ NPT ½ NPT ¾ NPT ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 25 F 30 F 25 F x M ,4 32 F 35 F 30 F x M ,4 36 F 40 F 35 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-16 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it 0.2 r 0 ON REQUEST ISO MALE SPIGOT
18 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING TYPE RSP - RP Execution "A" for cylinder till Ø "E" SETION - SETION ETAIL "E" 814 EXEUTION "B" for cylinder over Ø 520 POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN O-RING N.B.R. 102 LINK S 275 JR EN O-RING N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 106 HROM. SHAFT 42rMo4 EN 10083/1 806 O-RING N.B.R. 107 PIN 42rMo4 EN 10083/1 807 OVER GASKET N.B.R. 108 LINK JOINT S 275 JR EN O-RING N.B.R. 109 OVER S 275 JR EN PISTON RIVE PTFE+GRAPHITE 110 SLIING RING BzAl EN LIP GASKET POLYURETHANE 111 BUSHING STEEL/BRONE/TEFLON 819 O-RING N.B.R. 112 HROM. SHAFT 42rMo4 EN 10083/1 825 O-RING N.B.R. 115 HROM. SHAFT 42rMo4 EN 10083/1 826 O-RING N.B.R. 130 LINK AP S 275 JR EN O-RING N.B.R. 131 INTERMEIATE SHAFT 42rMo4 EN 10083/1 828 GASKET N.B.R. 132 LINK 42rMo4 EN 10083/1 901 BUSHING STEEL/BRONE/TEFLON 133 TUBE E 235 SR EN 10305/1 902 BUSHING STEEL/BRONE/TEFLON 134 STOP SREW 8.8 EN 898/1 903 BUSHING STEEL/BRONE/TEFLON 135 BLOK NUT 6 S EN 20898/2 904 BUSHING STEEL/BRONE/TEFLON 136 OVER S 275 JR EN NUT 6 S EN 20898/2 201 HEA P 355 NH EN 10028/3 906 SREW 8.8 EN 898/1 202 HEA P 355 NH EN 10028/3 907 SREW 8.8 EN 898/1 204 YLINER (int. chr. plated) E 355 EN 10297/1 909 SREW 8.8 EN 898/1 205 PISTON (till cylinder Ø 420) SAlu3 EN SEEGER ALLOY STEEL 205 PISTON (over Ø 420) S 275 JR EN SEEGER ALLOY STEEL 209 STAY BOLT 42 rmo4 EN NUT 6 S EN 20898/2 210 RING NUT 42rMo4 EN 10083/1 924 PIN 8.8 EN 898/1 211 HALF RING 42rMo4 EN 10083/1 925 NUT 6 S EN 20898/2 212 AP S 275 JR EN NAMUR PIN AISI STOP SREW 40 EN 10083/2 951 OWEL 8.8 EN 898/1 214 FLANGE 40 EN 10083/2 952 OWEL 8.8 EN 898/1 301 TUBE E 235 SR EN 10305/1 953 SREW 8.8 EN 898/1 801 O-RING N.B.R. STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-17 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
19 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH HANWHEEL TYPE RSPV - RPV T U N B E H2 "" (STANAR AIR INLET) ETAIL "" H1 S K O ØL Y OUPLING BRAKET (ON REQUEST) ØV I Q ØW P ATUATOR IMENSIONS (mm) B E H1 H2 I K L N O Q S T U V Y RSPV 2500/ RPV 2500/ ½ NPT FLANGE IMENSIONS (mm) RSPV 2500/ RPV 2500/ ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 25 F 30 F 25 F n x F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-18 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
20 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH HANWHEEL TYPE RSPV - RPV Execution "A" for cylinder till Ø "E" SETION - SETION ETAIL "E" 814 EXEUTION "B" for cylinder over Ø 520 POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN O-RING N.B.R. 102 LINK S 275 JR EN O-RING N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 106 HROM. SHAFT 42rMo4 EN 10083/1 806 O-RING N.B.R. 107 PIN 42rMo4 EN 10083/1 807 OVER GASKET N.B.R. 108 LINK JOINT S 275 JR EN O-RING N.B.R. 109 OVER S 275 JR EN PISTON RIVE PTFE+GRAPHITE 110 SLIING RING BzAl EN LIP GASKET POLYURETHANE 111 BUSHING STEEL/BRONE/TEFLON 816 O-RING N.B.R. 112 HROM. SHAFT 42 rmo4 EN 10083/1 818 O-RING N.B.R. 113 HROM. SHAFT 42 rmo4 EN 10083/1 819 O-RING N.B.R. 130 LINK AP S 275 JR EN O-RING N.B.R. 131 INTERMEIATE SHAFT 42rMo4 EN 10083/1 826 O-RING N.B.R. 132 LINK 42rMo4 EN 10083/1 827 O-RING N.B.R. 133 TUBE E 235 SR EN 10305/1 828 GASKET N.B.R. 134 STOP SREW 8.8 EN 898/1 901 BUSHING STEEL/BRONE/TEFLON 135 BLOK NUT 6 S EN 20898/2 902 BUSHING STEEL/BRONE/TEFLON 136 OVER S 275 JR EN BUSHING STEEL/BRONE/TEFLON 201 HEA P 355 NH EN 10028/3 904 BUSHING STEEL/BRONE/TEFLON 202 HEA P 355 NH EN 10028/3 905 NUT 6 S EN 20898/2 204 YLINER (int. chr. plated) E 355 EN 10297/1 906 SREW 8.8 EN 898/1 205 PISTON (till cylinder Ø 420) SAlu3 EN SREW 8.8 EN 898/1 205 PISTON (over Ø 420) S 275 JR EN SREW 8.8 EN 898/1 209 STAY BOLT 42 rmo4 EN SEEGER ALLOY STEEL 210 RING NUT 42 rmo4 EN 10083/1 913 SEEGER ALLOY STEEL 211 HALF RING 42 rmo4 EN 10083/1 916 SREW NYLON 212 AP S 275 JR EN ROLLER BEARING ALLOY STEEL 213 STOP SREW 40 EN 10083/2 923 NUT 6 S EN 29898/2 214 FLANGE 40 EN 10083/2 924 PIN 8.8 EN 898/1 302 INTERNAL FLANGE S 275 JR EN NUT 6 S EN 29898/2 303 SREW THREA FLANGE GS 400/12 EN OWEL 8.8 EN 898/1 310 PIN X20r13 EN NUT 6 S EN 20898/2 312 TUBE E 235 SR EN 10305/1 929 SREW 8.8 EN 898/1 313 HANWHEEL E 235 SR EN 10305/1 941 NAMUR PIN AISI RIVE NUT BSN5 EN OWEL 8.8 EN 898/1 315 STAY BOLT 40 EN 10083/2 952 OWEL 8.8 EN 898/1 316 RING NUT S 275 JR EN SREW 8.8 EN 898/1 801 O-RING N.B.R. STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-19 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
21 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL GEAR TYPE RSPR - RPR N B E H2 A "" (STANAR AIR INLET) ETAIL "" U H1 K O Y OUPLING BRAKET (ON REQUEST) P ØV I S ØR ØW Q ØL ATUATOR IMENSIONS (mm) A B E H1 H2 I K L N O Q R S U V Y RSPR 2500/ RPR 2500/ RSPR 4500/ RPR 4500/ RSPR 7500/ RPR 7500/ FLANGE IMENSIONS (mm) RSPR 2500/ RPR 2500/ RSPR 4500/ RPR 4500/ RSPR 7500/ RPR 7500/ ½ NPT ½ NPT ¾ NPT n x F ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 25 F 30 F 25 F x M ,4 32 F 35 F 30 F x M ,4 36 F 40 F 35 F ETAIL - YLINER IAMETER (mm) TYPE OF YLINER IMENSION W t ±0.2 ØG Ø ØXH8 H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-20 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
22 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL GEAR TYPE RSPR - RPR Execution "A" for cylinder till Ø "E" EXEUTION "B" SETION - SETION - ETAIL "E" for cylinder over Ø 520 POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN HUB 40 EN 10083/2 102 LINK S 275 JR EN RING NUT 40 EN 10083/2 105 OVER S 275 JR EN O-RING N.B.R. 106 HROM. SHAFT 42rMo4 EN 10083/1 802 O-RING N.B.R. 107 PIN 42rMo4 EN 10083/1 804 O-RING N.B.R. 108 LINK JOINT S 275 JR EN O-RING N.B.R. 109 OVER S 275 JR EN O-RING N.B.R. 110 SLIING RING BzAl EN OVER GASKET N.B.R. 111 BUSHING STEEL/BRONE/TEFLON 808 O-RING N.B.R. 112 HROM. SHAFT 42 rmo4 EN 10083/1 811 PISTON RIVE PTFE+GRAPHITE 114 HROM. SHAFT 42 rmo4 EN 10083/1 814 LIP GASKET POLYURETHANE 130 LINK AP S 275 JR EN O-RING N.B.R. 131 INTERMEIATE SHAFT 42rMo4 EN 10083/1 819 O-RING N.B.R. 132 LINK 42rMo4 EN 10083/1 825 O-RING N.B.R. 133 TUBE E 235 SR EN 10305/1 826 O-RING N.B.R. 134 STOP SREW 8.8 EN 898/1 827 O-RING N.B.R. 135 BLOK NUT 6 S EN 20898/2 828 GASKET N.B.R. 136 OVER S 275 JR EN BUSHING STEEL/BRONE/TEFLON 201 HEA P 355 NH EN 10028/3 902 BUSHING STEEL/BRONE/TEFLON 202 HEA P 355 NH EN 10028/3 903 BUSHING STEEL/BRONE/TEFLON 204 YLINER (int. chr. plated) E 355 EN 10297/1 904 BUSHING STEEL/BRONE/TEFLON 205 PISTON (till cylinder Ø 420) SAlu3 EN NUT 6 S EN 20898/2 205 PISTON (over Ø 420) S 275 JR EN SREW 8.8 EN 898/1 209 STAY BOLT 42 rmo4 EN SREW 8.8 EN 898/1 210 RING NUT 42 rmo4 EN 10083/1 909 SREW 8.8 EN 898/1 211 HALF RING 42 rmo4 EN 10083/1 910 SEEGER ALLOY STEEL 212 AP S 275 JR EN SEEGER ALLOY STEEL 213 STOP SREW 40 EN 10083/2 914 SREW 8.8 EN 898/1 214 FLANGE 40 EN 10083/2 915 SREW 8.8 EN 898/1 304 TUBE E 235 SR EN 10305/1 916 SREW 8.8 EN 898/1 305 SAFETY BOLT E 235 SR EN 10305/1 918 REUTOR AST IRON EN TUBE E 235 SR EN 10305/1 923 NUT 6 S EN 20898/2 308 RIVE NUT AST IRON EN PIN 8.8 EN 898/1 309 PIN 40 EN 10083/2 925 NUT 6 S EN 20898/2 311 AP ALUMINIUM 941 NAMUR PIN AISI INTERNAL FLANGE S 275 JR EN OWEL 8.8 EN 898/1 318 EXTERNAL FLANGE S 275 JR EN OWEL 8.8 EN 898/1 319 PIN X20r13 EN SREW 8.8 EN 898/1 320 HANWHEEL E 235 SR EN 10305/1 STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-21 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
23 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL HYRAULI PUMP H2 N "" TYPE RSPH - RPH B E (STANAR AIR INLET) n x F ETAIL - t ØG ±0.2 Ø H1 ETAIL "" K O 6 b 1 Y OUPLING BRAKET (ON REQUEST) P 1- ylinder 2 - Pump 3 - istributor 3 5 ØM I Q S ØL ØW 4 - Oil tank 5 - Relief valve 6 - By-pass 7 - heck valve ATUATOR IMENSIONS (mm) B E H1 H2 I K L M N O Q S Y RSPH 2500/ RPH 2500/ RSPH 4500/ RPH 4500/ RSPH 7500/ RPH 7500/ FLANGE IMENSIONS (mm) RSPH 2500/ RPH 2500/ RSPH 4500/ RPH 4500/ RSPH 7500/ RPH 7500/ ½ NPT ½ NPT ¾ NPT ON REQUEST n x F G X r t ISO MIN. MAX. Xmin Xmax x M ,4 25 F 30 F 25 F x M ,4 32 F 35 F 30 F x M ,4 36 F 40 F 35 F YLINER IAMETER (mm) TYPE OF YLINER IMENSION W b - TO BE EFINE H1 - STANAR INEX H2 - MOUNTING KIT AORING TO VI-VE 3845 (ON REQUEST) P - BRAKET AORING TO USTOMER REQUIREMENT (ON REQUEST) ØXH8 0.2 r 0 ON REQUEST ISO MALE SPIGOT servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-22 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
24 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH MANUAL HYRAULI PUMP TYPE RSPH - RPH Execution "A" for cylinder till Ø "E" SETION - SETION ETAIL "E" 814 EXEUTION "B" for cylinder over Ø 520 POS. ESRIPTION MATERIAL POS. ESRIPTION MATERIAL 101 HOUSING S 275 JR EN O-RING N.B.R. 102 LINK S 275 JR EN O-RING N.B.R. 105 OVER S 275 JR EN O-RING N.B.R. 106 HROM. SHAFT 42rMo4 EN 10083/1 806 O-RING N.B.R. 107 PIN 42rMo4 EN 10083/1 807 OVER GASKET N.B.R. 108 LINK JOINT S 275 JR EN O-RING N.B.R. 109 OVER S 275 JR EN PISTON RIVE PTFE+GRAPHITE 110 SLIING RING BzAl EN O-RING POLYURETHANE 111 BUSHING STEEL/BRONE/TEFLON 813 PISTON RIVE PTFE+GRAPHITE 112 HROM. SHAFT 42rMo4 EN 10083/1 814 LIP GASKET POLYURETHANE 116 HROM. SHAFT 42rMo4 EN 10083/1 816 O-RING N.B.R. 130 LINK AP S 275 JR EN O-RING N.B.R. 131 INTERMEIATE SHAFT 42rMo4 EN 10083/1 821 WIPER RING N.B.R. 132 LINK 42rMo4 EN 10083/1 825 O-RING N.B.R. 133 TUBE E 235 SR EN 10305/1 826 O-RING N.B.R. 134 STOP SREW 8.8 EN 898/1 827 O-RING N.B.R. 135 BLOK NUT 6 S EN 20898/2 828 GASKET N.B.R. 136 OVER S 275 JR EN BUSHING STEEL/BRONE/TEFLON 201 HEA P 355 NH EN 10028/3 902 BUSHING STEEL/BRONE/TEFLON 202 HEA P 355 NH EN 10028/3 903 BUSHING STEEL/BRONE/TEFLON 204 YLINER (int. chr. plated) E 355 EN 10297/1 904 BUSHING STEEL/BRONE/TEFLON 205 PISTON (till cylinder Ø 420) SAlu3 EN NUT 6 S EN 20898/2 205 PISTON (over cylinder Ø 420) S 275 JR EN SREW 8.8 EN 898/1 209 STAY BOLT 42 rmo4 EN SREW 8.8 EN 898/1 210 RING NUT 42 rmo4 EN 10083/1 909 SREW 8.8 EN 898/1 211 HALF RING 42 rmo4 EN 10083/1 910 SEEGER ALLOY STEEL 212 AP S 275 JR EN NUT 6 S EN 20898/2 213 STOP SREW 40 EN 10083/2 924 PIN 8.8 EN 898/1 214 FLANGE 40 EN 10083/2 925 NUT 6 S EN 20898/2 404 YLINER (int. chr. plated) E 355 SR EN 10297/1 927 NUT 6 S EN 20898/2 405 PISTON S 275 JR EN NAMUR PIN AISI FLANGE S 275 JR EN OWEL 8.8 EN 898/1 409 FLANGE S 275 JR EN OWEL 8.8 EN 898/1 410 STAY BOLT 40 EN 10083/2 953 SREW 8.8 EN 898/1 801 O-RING N.B.R. STANAR SPARE PARTS servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-23 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
25 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING FOR ONE EMERGENY STROKE SERIES RJP - RSP - RWP - RP ATUATOR WITH AIR TANK AN FAIL-SAFE IRUIT TYPIAL EXEUTION FOR MOULATING VALVE FOR MORE EMERGENY STROKES 1 1 SIGNAL R.P... /.../FS SIGNAL SIGNAL PNEUMATI ONNETION PNEUMATI ONNETION TYPIAL EXEUTION FOR ON-OFF VALVE FOR ONE EMERGENY STROKE FOR MORE EMERGENY STROKES R.P... /... / A PNEUMATI ONNETION 9 5 PNEUMATI ONNETION ATUATOR 2. BY-PASS 3. 3/2 PNEUM. ISTRIBUTOR 4. 4/2 PNEUM. ISTRIBUTOR 5. 3/2 SOLENOI VALVE 6. 4/2 SOLENOI VALVE 7. PRESSURE REUTOR 8. FILTER 9. NON RETURN VALVE 10. AIR TANK 11. ISHARGE PLUG 12. RELIEF VALVE 13. 3/2 PRESSURE SWITH 14. GAUGE 15. FLOW REGULATOR 16. POSTIONER 17. BOOSTER 18. POSITION TRANSMITTER 19. 3/2 MANUAL ISTRIBUTOR 20. 4/2 MANUAL ISTRIBUTOR servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-24 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
26 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION OUBLE ATING WITH AIR TANK SERIES RJP - RSP - RWP - RP n n ØW q Øm ATUATOR IMENSIONS SEE SPEIFI TYPE PAGE AIR TANK IMENSION AIR TANK APAITY IMENSIONS (mm) WEIGHT TYPE Lt Ø m n q k SEE FORMULA ABOVE FOR LARGER SIE VERTIAL EXTAN ALONE EXEUTION (NOT ASSEMBLE TO THE ATUATOR) AIR TANK IN WELE STEEL AORING TO EUROPEAN RULE EE 87/404 EQUIPPE WITH ERTIFIE SAFETY RELIEF VALVE N ¼ (IFFERENT ERTIFIATION ON REQUEST) IMENSION W SEE THE SPEIFI ATUATOR PAGE IMENSION q Ø m W q = mm 2 2 servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-25 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
27 PNEUMATI QUARTER TURN ATUATOR SOTH-YOKE EXEUTION VALVE BOTTOM ATUATOR ABOVE VALVE - ATUATOR OUPLING VALVE LEFT SIE VALVE ABOVE ATUATOR BOTTOM VALVE RIGHT SIE 1H 2H 3H 4H 5H 6H 7H 8H 9H 10H 11H 12H 13H 14H 15H 16H VALVE VERTIAL PIPE 17V 18V 19V 20V ENTRAL HOUSING YLINER SPRING ARTRIGE (ONLY FOR SINGLE ATING ATUATOR) " 1H " IS THE STANAR MOUNTING POSITION FOR SPRING TO OPEN. " 9H " IS THE STANAR MOUNTING POSITION FOR SPRING TO LOSE. servovalve RJP - RSP - RWP - RP Rev. 2/10 Pae P-26 Via Quasimodo, 27 - I S. STEFANO TIINO (MI) - PHONE: FAX: servovalve@servovalve.it
HYDRAULIC DOUBLE ACTING QUARTER TURN SCOTCH-YOKE ACTUATOR
HYDRULI DOULE TING QURTER TURN SOTH-YOKE TUTOR series RJO-RSO-RWO-RO SERVOVLVE spa Via Quasimodo 27-20010 S.STEFNO TIINO (MI) PHONE: 0039-029748461 FX: 0039-0297484646 E-mail: servovalve@servovalve.it
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR series RA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RA Rev. 0/15 SERIES RA
More informationPNEUMATIC LINEAR ACTUATOR
PNEUMATIC LINEAR ACTUATOR SINGLE ACTING series PA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it PA Rev. 0/15 Pneumatic
More informationHYDRAULIC QUARTER TURN ACTUATOR GAS OVER OIL
HYDRAULIC QUARTER TURN ACTUATOR GAS OVER OIL series GOOR SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RTO Rev.
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationScotch Yoke Actuators Spring return - Double acting
Scotch Yoke Actuators Spring return - Double acting 2 Econ Scotch Yoke actuators Scotch Yoke actuators Fig. 7991 Spring return - Fig. 7992 Double acting Proven quality since 1892 Econ has been offering
More informationPNEUMATIC SINGLE ACTING LINEAR ACTUATOR
PNEUMIC SINGLE CING LINER CUOR series P SERVOVLVE spa Via Quasimodo 27-20010 S.SEFNO ICINO (MI) PHONE: 0039-029748461 FX: 0039-0297484646 E-mail: servovalve@servovalve.it P Rev. 2/10 SINGLE CING SERIE
More informationVALVITALIA VALVE OPERATORS
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. VALVITALIA VALVE OPERATORS 1 VALVITALIA AUTOMATION DIVISION PROFILE Valvitalia Automation Division manufactures all type
More informationHeavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:00 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationMORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE
MORIN Pneumatic and hydraulic actuators EXPERIENCE MORE Stainless steel quarter-turn actuators MORIN S Stainless steel spring-return and double-acting pneumatic quarter-turn actuators For remote control
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationFisher 1052 Size 70 Diaphragm Rotary Actuator
1052 Actuator Product Bulletin Fisher 1052 Size 70 iaphragm Rotary Actuator Fisher 1052 size 70 spring return diaphragm rotary actuators operate splined shaft rotary valves, such as 8580, 852, 8590, V500,
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationThe company 1 Certifications 2
PNEUMATIC ACTUATORS PRISMA MECÁNICA S.L The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 7 Disassembly and materials 9 PA dimensions 11 P dimensions
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationBUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationPNEUMATIC AND HYDRAULIC ACTUATORS
The art of power and perfection PNEUMATIC AND HYDRAULIC ACTUATORS The art of power and perfection ACTREG, established in 1992, is a multinational company specialised in the manufacture and sales of high
More informationButterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationBUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationCompact Helical Slot Quarter Turn Actuators
Compact Helical Slot Quarter Turn Actuators Compact Helical Slot Quarter Turn Actuators Increasing worldwide demand for Oil and Natural gas has pushed continuous developing and construction of offshore
More informationARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
More information715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
More informationSPS-K & SPD-K pneumatic compact actuators the Compact series
PROCONTROL SPS-K & SPD-K pneumatic compact actuators the Compact series ProControl the Company ProControl is an independent highly flexible versatile and professional company specializing in the manufacture
More informationPneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationHYDRAULIC ACTUATORS EC-SERIES. ELFORCONTROLS Actuators and Valves Automation
HYDRAULIC ACTUATORS EC-SERIES ELFORCONTROLS Actuators and Valves Automation HISTORY Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing of a
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More informationMorin series S actuator
MORIN Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits Innovative stainless steel construction as standard provides superior
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationKSY - KSYM Series Pneumatic Scotch Yoke Actuators. Quifer Actuators, sl
KSY - KSYM Series Pneumatic Scotch Yoke Actuators Quifer Actuators, sl Table of Contents General Description 3 Standar Actuator Scope 3 Technical Data 4 Options 4 Advantages 5 Manual Override 5 Dimensions
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationBUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
More informationSY Series Scotch Yoke Actuators
SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable
More informationSpring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.
Algas Spring Return Pneumatic Actuator Scotch Yoke Design Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in. Features and benefits Scotch yoke design generates high
More informationBSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers
BSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers WORLDWIDE AUTOMATION SOLUTIONS The Fast-Track Manufacturer for Actuators & Controls Introduction BSM Actuators & Controls BSM Actuators
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design Single acting type PE Available from size12 up to 350 Double acting type PD Available from size12 up to 350 Old design Single acting type PE Available from size 600 up to 000 Soon
More informationVERSATILE THRUSTER PNEUMATIC SLIDE
S, SE VERSATILE THRUSTER PNEUMATI SLIE Major enefits Offered in short or long body an be ordered with standard or oversize shafts Standard dowel pin holes for ease of mounting Several switch options 5
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationHeavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
More informationIA m tion - Pneumatic actuators. Description. Product features. Design properties
IA mtion Pneumatic actuators Description The rack and pinion pneumatic actuator IA Motion combines innovative design features with the latest technology, materials and protection coatings available, resulting
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
762-763 BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 762-763 valve is a split body flanged ball valve dedicated to the automatic shut off of lines of standard fluids. With full bore construction,
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationDouble Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in.
Biffi GIG/GIGS Direct Gas Actuators Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in. Features and Benefits Separate gas and hydraulic cylinders prevent
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More information1-X-271 SERIES ROTARY PNEUMATIC DIAPHRAGM ACTUATORS
1-X-271 SERIES ROTARY PNEUMATIC DIAPHRAGM ACTUATORS 1-X-271 SERIES ROTRAY PNEUMATIC DIAPHRAGM ACTUATORS 1-X-271 series rotary pneumatic diaphragm actuator is normally installed on rotary valves (0 90 ).
More informationFeatures PNEUMATIC ACTUATORS. Stainless steel pneumatic actuators Spring return SR from bar. Technical features. Working condition
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationPNEUMATIC ACTUATOR HP-SERIES. Valve automation leader HKC. HCAG-HP-18 Rev.0
PNEUMATIC ACTUATOR SERIES 0045 Valve automation leader HKC HCAG8 Rev.0 Introduction series pneumatic actuators are specifically designed to respond to customers needs on the valve automation market. It
More informationhas designed and produced heavy duty pneumatic and hydraulic actuators for the most critical and complex industrial applications,
Since 1976 SERVOVALVE S.p.A. has designed and produced heavy duty pneumatic and hydraulic actuators for the most critical and complex industrial applications, becoming through the years a well known reliable
More informationTECHNICAL BULLETIN. LPC Compact Actuator Series. Experience in Motion FCD LFENTB AQ - (11/14)
LPC Compact Actuator Series TECHNICAL BULLETIN FCD LFENTB0002-00-AQ - (11/14) Experience in Motion Contents LPC Series Compact Actuator Specifications...4 Actuator Selection Table...6 Actuator Selection
More informationLEDEEN GS Series. Pneumatic and hydraulic actuators
LEDEEN GS Series Pneumatic and hydraulic actuators LEDEEN GS Series Pneumatic and Hydraulic Actuators Typical application For on-off or modulating control of any quarter-turn operated valve Pneumatic quarter-turn
More informationNSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator NUTORK CORPORATION
Actuators & Valves NSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator Pneumatic Actuator Single Acting Type Pneumatic Actuator Double Acting Type Hydraulic Actuator Single Acting Type NUTORK CORPORATION
More informationTECHNICAL SPECIFICATIONS. AD Retarder. OC442066/b 11/2000 1
TEHNIL SPEIITIONS 5 9 Retarer O66/b / 5 9 General speifiations Ientifiation oe N : B B 5 9 Variant oupling inex Voltage inex = V = V Speifiations M SS Total : 5 kg/ 75 lb Rotors : 9 kg/ 86 lb Stator :
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationLEDEEN CP Series. Compact actuators
LEDEEN CP Series Compact actuators LEDEEN CP Series Compact Actuators Customer-focused solutions Save valuable space as compared with a typical scotch yoke actuator Set the valve position precisely with
More informationTECHNICAL BULLETIN. Limitorque TM LDG Direct Gas Heavy-Duty Actuator Series. Experience in Motion FCD LFENTB AQ - 06/16
TECHNICAL BULLETIN Limitorque TM LDG Direct Gas Heavy-Duty Actuator Series FCD LFENTB0005-00-AQ - 06/16 Experience in Motion Contents LDG Series Hydraulic Heavy-Duty Actuator Specifications...4 Actuator
More informationAIR TORQUE HEAVY DUTY. AT-HD Series. Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design
AIR TORQUE HEAVY DUTY AT-HD Series Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design The COMPANY With over 20 years of experience in engineering and manufacturing
More informationABV Index. ABV Actuators and Control Systems
Index ABV Actuators and Control Systems Overview page 3 ABV Actuators Production Range page 4 Modular Assembly page 5 Dual Valve Mounting Inteface page 6 Scotch-Yoke vs. Rack and Pinion Mechanism page
More informationRichter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More informationRichter Twin Piston Quarter-turn Actuators RA
Richter Twin Piston Quarter-turn Actuators RA Compact Powerful Maintenance-free ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Keeping the World Flowing
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Keeping the World Flowing Keeping the World Flowing RELIABILITY IN FLOW CONTROL CRITICAL APPLICATIONS Reliable operation when it
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationThe Series 3800 Rotary piston actuator are designed to operate rotary valves, such as Ball valves. Butterfly valves and Plug valves
Technical Bulletin A 380 Series 3800 Canted Scotch Yoke Actuator Series 3800 Features General The Series 3800 Rotary piston actuator are designed to operate rotary valves, such as Ball valves. Butterfly
More informationRC 200 designs. Pressure ranges RC 200-DA: 2-10 bar / psi RC 200-SR: 2-10 bar / psi
RC-DA/SR Technical Data RC-DA RC-SR All Remote Control actuators are 0% leak and functional tested Marked according to international standards Delivered with instructions in all EU languages Temperature
More informationGIG DOUBLE ACTING DIRECT GAS QUARTER-TURN ACTUATORS
GIG DOUBLE ACTING DIRECT GAS QUARTER-TURN ACTUATORS Table of Contents GIG Double Acting Direct Gas Quarter-Turn Actuators Features and Benefits pag. 1 Assembly Picture with Part List pag. 3 Performance
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationBiffi Morin S series actuators
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits General applications For remote control of any quarter-turn application:
More informationSpring return pneumatic actuators. DYNACTAIR 1.5, 3, 6, 12 and 25 : rack and pinion kinematics. DYNACTAIR 50 and 100 : scotch -yoke kinematics
Type series booklet 8511.1/6--10 DYNACTAIR 1.5 to 800 Spring return pneumatic actuators DYNACTAIR 1.5, 3, 6, 12 and 25 : rack and pinion kinematics DYNACTAIR 50 and 100 : scotch -yoke kinematics DYNACTAIR
More informationrange to scotch-yoke pneumatic & hydraulic actuators, rack and pinion actuators and relevant control systems.
Company Profile History Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing a complete range of valves actuators and related accessories. The
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More informationInstallation & Operation Manual
Installation & Operation Manual (I-TORK PDS Series Pneumatic Actuator) PDS-M0108/1010 74-6, Chun Ui-Dong, Won Mi-Gu, Bucheon, Kyoung Ki-Do, Korea Tel : 82-2-855-1365, 66 Fax : 82-2-855-1367 E-mail : roy75@i-tork.com
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationGIG/GIGS/GPO Gas Powered Actuators. GIG/GIGS/GPO gas powered actuators
GIG/GIGS/GPO Gas Powered Actuators GIG/GIGS/GPO gas powered actuators A world Of experience Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers
More informationTOP-QUALITY PNEUMATIC ACTUATOR
TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is
More informationQuarter turn actuators Index
Index General information page Introduction 227 Product information Pneumatic actuators page Double acting and spring return 228 page Index 231 ECON Compact 232 EL-series 234 ELQ-series 236 Hydraulic actuators
More informationDouble acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics
Technical leaflet 8515.1/3--10 ACTAIR 1.5 to 800 Double acting ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics ACTAIR 100 and 200: scotch -yoke kinematics ACTAIR 400 and 800: yoke AMRI patented
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More informationKTM Pneumatic Actuators AW, AWN series (for large sized valves)
Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines Features Scotch yoke construction ideal for large sized valves Two pistons in double
More informationThe intelligent actuator
The intelligent actuator Safe and Flexible The new Actuator Generation actubar Type A-001 Type A/AS-004 to A/AS-230 Type A/AS-350 to A/AS-750 Objective actubar is the latest generation in our range of
More information