LEDEEN GS Series. Pneumatic and hydraulic actuators
|
|
- Tamsin Butler
- 5 years ago
- Views:
Transcription
1 LEDEEN GS Series Pneumatic and hydraulic actuators
2 LEDEEN GS Series Pneumatic and Hydraulic Actuators Typical application For on-off or modulating control of any quarter-turn operated valve Pneumatic quarter-turn actuator. Hydraulic quarter-turn actuator. Modular assembly LEDEEN* GS series actuators provide increased flexibility through consistent engineering design and efficient modularity. Double-acting, single cylinder, or dual cylinder are combinations readily available to meet specific pipeline application requirements. Pneumatic cylinder Spring cartridge Frame Hydraulic cylinder Symmetric yoke Canted yoke 2
3 Standard Features All models available as double-acting or spring-return Torque outputs to 57,360 in.lbf [6,480 N.m] Open and close travel stops provide ± 3 minimum Scotch yoke mechanism generates powerful opening and closing torque outputs Steel-fabricated frame provides rugged foundation of modular assemblies Chrome-plated side-load bar with guide block for effective elimination of piston rod deflection Bronze bushing interfaces provide low-friction support of sliding and rotating components Aluminum bronze sliding blocks for a low-friction, low-stress pin connection Steel cylinder assembly provides robust pressure containment for all conditions Cylinder ID plated to ensure sealing surface with excellent corrosion resistance Nitrile rubber piston seal configurations specifically designed for pneumatic and hydraulic applications Composite guide band on piston provides low-friction guidance and support Steel spring cartridge is fully enclosed from environmental conditions Seal-welded design construction provides maximum personnel safety Epoxy-coated prestressed springs provide consistent performance with corrosion protection Pneumatic spring-return actuator. Hydraulic spring-return actuator. Standard Product Characteristics Actuator Type Temperature Range, degf [degc] Gauge Pressure Range, psi [bar] Pneumatic 40 to 175 [3 to 12] 22 to 212 [ 30 to 100] Hydraulic 145 to 3,000 [10 to 202] 3
4 Pneumatic Actuator Standard Construction Pneumatic double-acting actuator. Pneumatic spring-return actuator. Item Description Material 1 Guide bar Alloy steel and chrome plated 2 Pin Alloy steel 3 Guide block Carbon steel 4 Sliding block Aluminum bronze 5 Cylinder Carbon steel 6 Tie rod Alloy steel 7 Flange Carbon steel 8 Guide band Teflon and graphite 9 Seal Nitrile rubber O-ring 10 Piston Carbon steel 11 Piston rod Alloy steel 12 Travel stop Alloy steel 13 Scotch yoke Alloy steel 14 Bushing Bronze 15 Frame Carbon steel 16 Spring cartridge Carbon steel 17 Spring Alloy steel 4
5 Hydraulic Actuator Standard Construction Hydraulic double-acting actuator Hydraulic spring-return actuator. Item Description Material 1 Guide bar Alloy steel and chrome plated 2 Pin Alloy steel 3 Guide block Carbon steel 4 Sliding block Aluminum bronze 5 Cylinder Carbon steel 6 Tie rod Alloy steel 7 Flange Carbon steel 8 Guide band Teflon and graphite 9 Seal Nitrile rubber quad ring 10 Piston Carbon steel 11 Piston rod Alloy steel 12 Travel stop Alloy steel 13 Scotch yoke Alloy steel 14 Bushing Bronze 15 Frame Carbon steel 16 Spring cartridge Carbon steel 17 Spring Alloy steel 5
6 Standard Options Jackscrew override Hand pump override Special seals for low-temperature applications to 76 degf [ 60 degc] and for high temperature applications to 392 degf [200 degc] Pneumatic spring-return actuator with jackscrew override. Pneumatic double-acting actuator with jackscrew override. Pneumatic double-acting actuator with hand pump override. Certifications Cameron LEDEEN GS series actuators comply with many industry standards. ISO 9001:2000 PED 97/23/EC SI 825 IEC 61508:2000 (TUV SIL-3) Technical Regulations Customs Union (TR CU) ISO 9001:2008 ISO 9001:2008 quality management system. PED 97/23/EC European PED pressure equipment directive. IEC :2010 SIL 3 capability. 6
7 FLOW CONTROL Actuator Model In-lbs FLOW CONTROL Actuator Model In-lbs Max. FLOW CONTROL Actuator Model In-lbs Max. allowable Max. Displ. working Torque (cu-in) Max. allowable Max. Displ. working Torque (cu-in) Model Number Designation Cameron offers customizable actuators from the frame type to the override options. A sample of the actuator selection process is shown below. Starting with Step 1, Frame Type, the actuator components needed to fit the customer s requirements are built. An example model number is shown below, which specifically identifies each variable for selection. GS623P-A-SRC6-JS Example GS 6 23 P - A - SR C 6 - JS Frame type Frame size Power cylinder size Product type Manual override option Spring cartridge size Fail position Actuator type Frame Type GS Frame Size 2 6 Power Cylinder Size Pneumatic Hydraulic 4 7 Product Type P Pneumatic H Hydraulic Yoke Type A Canted S Symmetric GS6 Models only Only for spring-return models If required Actuator Type SR Spring-return Fail Position O Open C Close Spring Cartridge Size 1 12 Manual Override Option JS Jackscrew HMO Hand pump FLOW CONTROL LEDEEN FACILITY Drilling & Production System Via Gandini, Voghera (Pavia) - ITALY Tel Telefax Technical data For additional technical data such as torque charts, dimensional drawings, etc., refer to the LEDEEN GS Series actuators technical data packages or contact Cameron. SPRING TO CLOSE PNEUMATIC ACTUATORS - Output torque in In-lbs CDT TECHNICAL DOCUMENTATION PROJECT LEDEEN QUARTER TURN PNEUMATIC ACTUATORS Spring Torque Cylinder torque with supply pressure allowable Max. Displ. working Torque (cu-in) 43,5 psig 58 psig 80 psig 101,5 psig 130,5 psig 145 psig 174 psig pressure In-lbs Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending psig VA 011 SRC VA 011 SRC VA 011 SRC VA 011 SRC VA 111 SRC VA 111 SRC VA 111 SRC VA 111 SRC VA 111 SRC VA 113 SRC VA 113 SRC VA 113 SRC VA 113 SRC VA 113 SRC VA 113 SRC VA 113 SRC VA 116 SRC VA 116 SRC VA 116 SRC VA 116 SRC VA 116 SRC VA 116 SRC VA 116 SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 210P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 212P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 216P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC GS 220P-S-SRC SPRING TO CLOSE PNEUMATIC ACTUATORS - Output torque in In-lbs Spring Torque Cylinder torque with supply pressure 43,5 psig 58 psig 80 psig 101,5 psig 130,5 psig 145 psig 174 psig pressure In-lbs Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending psig GS 220P-S-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-A-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 616P-S-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-A-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 620P-S-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-A-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 623P-S-SRC GS 628P-A-SRC GS 628P-A-SRC SPRING TO CLOSE PNEUMATIC ACTUATORS - Output torque in In-lbs Spring Torque Cylinder torque with supply pressure 43,5 psig 58 psig 80 psig 101,5 psig 130,5 psig 145 psig 174 psig pressure In-lbs Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending Starting Running Ending psig GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-A-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 628P-S-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRC GS 632P-A-SRCSC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 632P-S-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRC GS 638P-A-SRCSC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC GS 638P-S-SRC COMPASS BALESTRACCI NEGRINI 7
8 LEDEEN GS Series cameron.slb.com/valves *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2017 Schlumberger. All rights reserved. 17-VL
Scotch-Yoke LEDEEN Actuators. Gas-over-oil and direct-gas actuators
Scotch-Yoke LEDEEN Actuators Gas-over-oil and direct-gas actuators Scotch-Yoke Gas-Over-Oil LEDEEN Actuators Typical application For on-off control of any natural gas transmission ball or plug valve utilizing
More informationLEDEEN GS Series. Pneumatic and Hydraulic Actuators
LEDEEN GS Series Pneumatic and Hydraulic Actuators LEDEEN GS Series typical application For on/off or modulating control of any quarter-turn operated valve. Pneumatic Quarter-turn Actuator MODULAR ASSEMBLY
More informationLEDEEN CP Series. Compact actuators
LEDEEN CP Series Compact actuators LEDEEN CP Series Compact Actuators Customer-focused solutions Save valuable space as compared with a typical scotch yoke actuator Set the valve position precisely with
More informationLEDEEN SY Series Gas-Over-Oil and Direct Gas Actuators
LEDEEN SY Series Gas-Over-Oil and Direct Gas Actuators Gas-Over-Oil typical application For on/off control of any natural gas transmission ball or plug valve utilizing the high-pressure natural gas from
More informationLEDEEN HS Series. Compact actuators
LEDEEN HS Series Compact actuators LEDEEN HS Series Compact Actuators Customer-focused solutions Save valuable space with one of the smallest compact actuators on the market Get the best power transmission
More informationCAMERON Compact Actuators HS Series. Minimum space. Maximum performance.
CAMERON Compact Actuators HS Series Minimum space. Maximum performance. CAMERON Compact Actuators HS Series CUSTOMER-FOCUSED SOLUTIONS Save valuable space with one of the smallest compact actuators on
More informationMORIN. Pneumatic and hydraulic actuators EXPERIENCE MORE
MORIN Pneumatic and hydraulic actuators EXPERIENCE MORE Stainless steel quarter-turn actuators MORIN S Stainless steel spring-return and double-acting pneumatic quarter-turn actuators For remote control
More informationLEDEEN Actuator and Control Solutions. Innovative solutions for pneumatic, hydraulic, gas-over-oil, direct gas and subsea applications.
LEDEEN Actuator and Control Solutions Innovative solutions for pneumatic, hydraulic, gas-over-oil, direct gas and subsea applications. Table of Contents Ledeen Actuator and Control Solutions Introduction...
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
More informationKSY - KSYM Series Pneumatic Scotch Yoke Actuators. Quifer Actuators, sl
KSY - KSYM Series Pneumatic Scotch Yoke Actuators Quifer Actuators, sl Table of Contents General Description 3 Standar Actuator Scope 3 Technical Data 4 Options 4 Advantages 5 Manual Override 5 Dimensions
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationHYDRAULIC ACTUATORS EC-SERIES. ELFORCONTROLS Actuators and Valves Automation
HYDRAULIC ACTUATORS EC-SERIES ELFORCONTROLS Actuators and Valves Automation HISTORY Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing of a
More informationCONTROLS. S98 Pneumatic Actuator
R CONTROLS S98 Actuator Bray International Headquarters Office & USA Manufacturing Houston, Texas +281.894.5454 INTERNATIONAL, Inc. At Bray, our business is helping our customers with their flow control
More informationPLA & "PLAS" PNEUMATIC ACTUATORS FOR LINEAR VALVES
PLA & "PLAS" PNEUMATIC ACTUATORS FOR LINEAR VALVES PLA/PLAS Pneumatic actuator 2 PLA/PLAS Pneumatic Actuator Double Acting and Single Acting Pneumatic Linear Actuators for On-Off and regulating service!"
More informationSCOTCH YOKE ACTUATORS
SCOTCH YOKE ACTUATORS ENGLAND ITALY RUSSIA MALAYSIA PALADON SYSTEMS OVERVIEW For over 30 years Paladon Systems has been supplying valve actuators and control systems on a global basis. Since our inception
More informationHeavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:00 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
More informationHYDRAULIC QUARTER TURN ACTUATOR GAS OVER OIL
HYDRAULIC QUARTER TURN ACTUATOR GAS OVER OIL series GOOR SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RTO Rev.
More informationSpring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.
Algas Spring Return Pneumatic Actuator Scotch Yoke Design Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in. Features and benefits Scotch yoke design generates high
More informationSPS-K & SPD-K pneumatic compact actuators the Compact series
PROCONTROL SPS-K & SPD-K pneumatic compact actuators the Compact series ProControl the Company ProControl is an independent highly flexible versatile and professional company specializing in the manufacture
More informationVALVITALIA VALVE OPERATORS
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. VALVITALIA VALVE OPERATORS 1 VALVITALIA AUTOMATION DIVISION PROFILE Valvitalia Automation Division manufactures all type
More informationLEDEEN SEF. Smart electric fail-safe actuator and control systems
LEDEEN SEF Smart electric fail-safe actuator and control systems The Cameron portfolio of LEDEEN* actuators includes a new compact, modular, onboard hydraulic power unit (HPU). This new technology is operated
More informationLimitorque TM LPS. Heavy-Duty Pneumatic Scotch Yoke Actuator. Experience In Motion
Limitorque TM LPS Heavy-Duty Pneumatic Scotch Yoke Actuator Experience In Motion Quality, reliability and efficiency The Limitorque LPS pneumatic Scotch yoke actuator is designed to meet the oil and gas
More informationBIFFI MORIN S SERIES ACTUATORS
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 240,000 lb.in. FEATURES AND BENEFITS GENERAL APPLICATIONS For remote control of any quarter-turn application:
More informationPROCONTROL SPS & SPD. the Premium series. single & double acting pneumatic actuators
PROCONTROL SPS & SPD single & double acting pneumatic actuators the Premium series ProControl the Company ProControl is an independent highly flexible versatile and professional company specializing in
More informationALGA/ALGAS SERIES PNEUMATIC ACTUATORS ALGA/ALGAS PNEUMATIC ACTUATORS
ALGA/ALGAS SERIES PNEUMATIC ACTUATORS ALGA/ALGAS PNEUMATIC ACTUATORS A WORLD OF EXPERIENCE Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers
More informationTECHNICAL BULLETIN. Limitorque TM LDG Direct Gas Heavy-Duty Actuator Series. Experience in Motion FCD LFENTB AQ - 06/16
TECHNICAL BULLETIN Limitorque TM LDG Direct Gas Heavy-Duty Actuator Series FCD LFENTB0005-00-AQ - 06/16 Experience in Motion Contents LDG Series Hydraulic Heavy-Duty Actuator Specifications...4 Actuator
More informationMorin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 158200 Nm Features and
More informationRANGE. but above. overall lifespan. wherever. and they. (1600 psig) Bar Yoke: module. Mechanism. duty. Symmetric BY Series is demand.
B BY SER RIES Direcct Gas Actuat A tors P PATENT PENDING P G Nrr PR2008 8A000007 7 INTRODUCTION The DVG Automation newly designed BY Series incorporates several new design features to provide higher efficiency
More informationScotch Yoke Actuators Spring return - Double acting
Scotch Yoke Actuators Spring return - Double acting 2 Econ Scotch Yoke actuators Scotch Yoke actuators Fig. 7991 Spring return - Fig. 7992 Double acting Proven quality since 1892 Econ has been offering
More informationGIG/GIGS/GPO Gas Powered Actuators. GIG/GIGS/GPO gas powered actuators
GIG/GIGS/GPO Gas Powered Actuators GIG/GIGS/GPO gas powered actuators A world Of experience Biffi has been a leading manufacturer of valve actuators for more than 50 years. As one of the few manufacturers
More informationMasoneilan* 51/52/53 Series
Technical Specifications Rev.E - 01/2018 Masoneilan* 51/52/53 Series Cylinder Actuator BHGE Data Classification: Public Conversion Table All the USCS values are converted to metric values using the following
More informationBiffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
More informationBiffi Morin S series actuators
Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits General applications For remote control of any quarter-turn application:
More informationTECHNICAL BULLETIN. LPC Compact Actuator Series. Experience in Motion FCD LFENTB AQ - (11/14)
LPC Compact Actuator Series TECHNICAL BULLETIN FCD LFENTB0002-00-AQ - (11/14) Experience in Motion Contents LPC Series Compact Actuator Specifications...4 Actuator Selection Table...6 Actuator Selection
More informationDouble Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in.
Biffi GIG/GIGS Direct Gas Actuators Double Acting and Spring Return Direct Gas Quarter-turn Actuators Output Torques to 6,500,000 lb.in. Features and Benefits Separate gas and hydraulic cylinders prevent
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationLOW PRESSURE ACTUATORS LOW PRESSURE PNEUMATIC ACTUATORS
LOW PRESSURE ACTUATORS LOW PRESSURE PNEUMATIC ACTUATORS A WORLD OF EXPERIENCE Biffi is a leading manufacturer of valve automation solutions with 60 years experience and a global presence, offering a comprehensive
More informationLOW PRESSURE ACTUATORS. LOW PRESSURE PNEUMATIC actuators
LOW PRESSURE ACTUATORS LOW PRESSURE PNEUMATIC actuators A WORLD OF EXPERIENCE Biffi is a leading manufacturer of valve automation solutions with 60 years experience and a global presence, offering a comprehensive
More informationDuctile Iron/Stainless Steel Cylinders Quarter-turn Spring Return and Double Acting Actuators Output Torques to 1,374,000 lb.in.
Features and enefits Ductile iron housing, piston and end caps provide long product life with durable, cost effective operation. Output shaft made of high strength alloy steel or 17-4PH stainless transmits
More informationAIR TORQUE HEAVY DUTY. AT-HD Series. Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design
AIR TORQUE HEAVY DUTY AT-HD Series Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design The COMPANY With over 20 years of experience in engineering and manufacturing
More informationMorin series S actuator
MORIN Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 26890 Nm Features and benefits Innovative stainless steel construction as standard provides superior
More informationRC 200 designs. Pressure ranges RC 200-DA: 2-10 bar / psi RC 200-SR: 2-10 bar / psi
RC-DA/SR Technical Data RC-DA RC-SR All Remote Control actuators are 0% leak and functional tested Marked according to international standards Delivered with instructions in all EU languages Temperature
More informationrange to scotch-yoke pneumatic & hydraulic actuators, rack and pinion actuators and relevant control systems.
Company Profile History Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing a complete range of valves actuators and related accessories. The
More informationACTUATORS AND CONTROLS OVERVIEW
ACTUATORS AND CONTROLS OVERVIEW AUGUST 2015 PNEUMATIC ACTUATORS BIFFI Biffi-Morin Series B and C actuators are constructed of ductile iron housing and end caps, 17-4 stainless steel yoke, with either 316
More informationLimitorque TM LPS. Limitorque Pneumatic Scotch Yoke Heavy-Duty Actuator
Limitorque TM LPS Limitorque Pneumatic Scotch Yoke Heavy-Duty Actuator Quality, Dependability and Productivity Flowserve Limitorque makes valve control easier in ways as diverse as the applications in
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Keeping the World Flowing
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Keeping the World Flowing Keeping the World Flowing RELIABILITY IN FLOW CONTROL CRITICAL APPLICATIONS Reliable operation when it
More informationLHS & LHD linear hydraulic actuators the Linear series
PROCONTROL LHS & LHD linear hydraulic actuators the Linear series ProControl the Company ProControl is an independent highly flexible versatile and professional company specializing in the manufacture
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationCOMPACT ACTUATORS COMPACT PNEUMATIC & HYDRAULIC ACTUATORS
COMPACT ACTUATORS COMPACT PNEUMATIC & HYDRAULIC ACTUATORS A WORLD OF EXPERIENCE Biffi is a leading manufacturer of valve automation solutions with 60 years experience and a global presence, offering a
More informationLimitorque TM LHS and LHH
Limitorque TM LHS and LHH Limitorque Hydraulic Scotch Yoke Heavy-Duty Actuator Limitorque Fluid Power Systems The Limitorque Fluid Power family of heavy-duty actuators presents the Limitorque Hydraulic
More informationFlowbus Corporation General Presentation
Flowbus Corporation General Presentation About us: We are process valve control and safety specialist Establishment in 2004 Mission - As a control and safety specialist, provide Ultimate safety and reliability
More informationMorin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 1,400,000 lb.in. Features
More informationRCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
More informationRCI200 Range. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Redefining Flow Control
RCI200 Range Compact Scotch-Yoke Actuators for Quarter-Turn Valves Redefining Flow Control Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
More informationLimitorque TM LPC. Limitorque Pneumatic Compact Scotch Yoke Actuator
Limitorque TM LPC Limitorque Pneumatic Compact Scotch Yoke Actuator Limitorque Fluid Power Systems Today s industry requirements are more rigorous than ever before. Nowhere is this more evident than in
More informationCSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design
CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows
More informationR-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationRC200 Range. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Redefining Flow Control
RC200 Range Compact Scotch-Yoke Actuators for Quarter-Turn Valves Redefining Flow Control Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
More informationModel DFRP Rotary Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFRP actuators a rugged, long lasting product. DFRP actuators are manufactured
More informationRCI200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation RCI200 Compact Scotch-Yoke Actuators for Quarter-Turn Valves PUB014-002-00 Issue 08/10 Rotork Actuators Quality Controlled
More informationRCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
More informationMorin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More informationEstablished Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
More informationGIGS SERIES DIRECT GAS ACTUATORS SPRING RETURN CONFIGURATION
GIGS SERIES DIRECT GAS ACTUATORS SPRING RETURN CONFIGURATION Table of Contents GIGS Spring Return Gas Powered Actuator General and Features pag. 1 Cut-away Drawing and Technical Data pag. 2 Output Torque
More informationKEYSTONE PNEUMATIC ACTUATOR FIGURE 738
The F78 is a linear pneumatic actuator, designed especially for use on linear actuated valves FEATURES Suits all linear actuated valves. The Keystone F78 pneumatic actuator series is engineered to provide
More informationDDH hydraulic series. Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT PB ALMELO, THE NETHERLANDS
DDH hydraulic series Spring return & double acting Compact actuator DUXVALVES B.V. BORNSESTRAAT 321 7601 PB ALMELO, THE NETHERLANDS TEL : +31(0)546-458347 FAX : +31(0)546-458351 Applications The Duxdrive
More informationGT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
More informationGIG DOUBLE ACTING DIRECT GAS QUARTER-TURN ACTUATORS
GIG DOUBLE ACTING DIRECT GAS QUARTER-TURN ACTUATORS Table of Contents GIG Double Acting Direct Gas Quarter-Turn Actuators Features and Benefits pag. 1 Assembly Picture with Part List pag. 3 Performance
More informationPNEUMATIC LINEAR ACTUATOR
PNEUMATIC LINEAR ACTUATOR SINGLE ACTING series PA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it PA Rev. 0/15 Pneumatic
More informationFisher 685SE and 685SR Piston Actuators
685SE and 685SR Actuators Product ulletin Fisher 685SE and 685SR Piston Actuators The 685SE and 685SR are medium to large spring-return, double-acting piston actuators that provide accurate, high thrust
More informationSERIES M STANDARD FEATURES STANDARD OPTIONS. Double acting or spring return. Heavy duty housing, torque plug and piston rod design.
Torque Plug Ductile Iron Thrust Pin Bearing Cast Iron Piston Rod Cylinder Tube Piston Ductile Iron Spring Retainer Ductile Iron Spring End Cap Ductile Iron Cover Housing Ductile Iron Adjustable Stops Spring
More informationPneumatic Rotary Actuators and Accessories
CONTROLS A Division of A-T Controls, Inc. Pneumatic Rotary Actuators and Accessories II GD c IIC 00 FEATURES TRIAC pneumatic actuators are designed and manufactured to provide the highest cycle-life on
More informationSERIES 15 PNEUMATIC ACTUATOR CONTENT PNEUMATIC ACTUATOR ZT SERIES PNEUMATIC ACTUATOR... 1 AW SERIES PNEUMATIC ACTUATOR...
CONTENT... 1-27 ZT SERIES... 1 AW SERIES... 19 reserves the right to change specifications without notice. i ZT SERIES INTRODUCTION The ZT series pneumatic actuator is one of the best designs in the market,
More informationRC200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation RC200 Compact Scotch-Yoke Actuators for Quarter-Turn Valves PUB014-001-00 Issue 08/10 Rotork Actuators Quality Controlled
More informationCBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design and Construction Emerson is the global leader in valve automation, providing reliable
More informationABV Index. ABV Actuators and Control Systems
Index ABV Actuators and Control Systems Overview page 3 ABV Actuators Production Range page 4 Modular Assembly page 5 Dual Valve Mounting Inteface page 6 Scotch-Yoke vs. Rack and Pinion Mechanism page
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More information1-X-271 SERIES ROTARY PNEUMATIC DIAPHRAGM ACTUATORS
1-X-271 SERIES ROTARY PNEUMATIC DIAPHRAGM ACTUATORS 1-X-271 SERIES ROTRAY PNEUMATIC DIAPHRAGM ACTUATORS 1-X-271 series rotary pneumatic diaphragm actuator is normally installed on rotary valves (0 90 ).
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationModel DFLP Linear Actuator
Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationD-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
More informationHeavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
More informationDYNATORQUE. Valve accessories
DYNATORQUE Valve accessories Content DYNATORQUE Valve Accessories Introduction 3 Worm gear operators 4 Bevel gear operators 4 Valve locking devices 5 Manual overrides 5 DYNATORQUE D-Stop* partial-stroke
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationBettis RGS Q-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet April 2016 RGS Rev.
Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 21,000 in-lb (2373 N m) Ductile Iron or Stainless-Steel Construction Temperatures from -60 F to 450 F (-51 C
More informationFisher 685 Piston Actuator
685 Piston Actuator Product Bulletin Fisher 685 Piston Actuator The 685 is a double-acting piston actuator that provides accurate, high thrust output for short to long travel applications. This actuator
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR series RA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RA Rev. 0/15 SERIES RA
More informationNSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator NUTORK CORPORATION
Actuators & Valves NSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator Pneumatic Actuator Single Acting Type Pneumatic Actuator Double Acting Type Hydraulic Actuator Single Acting Type NUTORK CORPORATION
More informationAPS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
More informationThe company 1 Certifications 2
PNEUMATIC ACTUATORS PRISMA MECÁNICA S.L The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 7 Disassembly and materials 9 PA dimensions 11 P dimensions
More informationBI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
More informationBR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
More informationCompact Helical Slot Quarter Turn Actuators
Compact Helical Slot Quarter Turn Actuators Compact Helical Slot Quarter Turn Actuators Increasing worldwide demand for Oil and Natural gas has pushed continuous developing and construction of offshore
More information