5.8 SPECIALIZED WEAR PROTECTION

Transcription

1 5.8 SPEILIZE WER PROTETION Rippers

2 Ripper Parts for ozer & Loaders aterpillar Style R Model 11 (SS) Shank ssembly 8E0467, 8E1466, 7T6020, 9W0259 REPLEMENT RIPPER PRTS FOR OZERS & LOERS Repair Segment Repair Nose Part No HX N/ 9N4621HX Upper Fastener(s) 8E2229P/ W (pin & retainer) 6Y2443P* Lower Fasteners(s) 8E2229P/ W (pin & retainer) 6Y2443P* Tooth Series 1 R550 6Y3138, 8E8411, 6Y6141, 8E8414, 6Y6144, 8E8415, 6Y6147, 8E8416, 8E8417, , HX HX 9W8365HX 6Y3909P/4T4707W (pin & retainer) 3G0500P* 6Y3909P/4T4707W (pin & retainer) R (MS), 10, 9L 9, 8 7H, 983 7, 6, 5, 973, 977 4, 941, 951, 955, 963 6Y4679, 8E8412, , , 6Y5616, 8E8413 1V4592, 7T5130, 3G8566, 9W4427, 3G2088, 9W4426, 9J5954, 1U4873, 7T HX HX 6Y8960HX, 6Y8960HHX 1U3630HX* HX 6Y9704HX 3G5707, 3G6507 1U3630HX* HX , , 4T0134, 4T0135, 4T0136, 4T8988, 4T8989, 4T8990, 7J1792, 7J1793, 8E5339, 8E5340, 8E5341, 8E5345, 8E5346, 8E5347, 8E5348, 9W6167 9W7382, 7J6671 8E8418HX 7J1791HX* 9U9694HX 4T9776WN* 1U3644HX, 1U3644HHX 6J8814HX, 6J8814WHX, 8E1848HX 6J8814HX, 6J8814WHX, 8E1848HX 6Y3909P/4T4707W (pin & retainer) 3G0500P* 8J (weld-on retainer) - 6J8811P 6J8811P 6Y3909P/4T4707W (pin & retainer) 6Y3909P/4T4707W (pin & retainer) 3G0500P* 6Y3909P/4T4707W 3G0500P* 6Y3394P/8E5559W 7J9600P* R500 R500 R500 R450 R450-9W7488WN R J6586HX (straight) 9J (curved) R350 9J8920HX (old style) - 12WN R , 943 1U J250 3, 931 8J J200 (SS) = Single Shank (MS) = Multi-Shank ontact Hensley s ttachment ivision for Ripper Shank Replacements for 7H ozers and larger. * Old Style enter Snap Ring Pin. 1 See Tooth Series pplication hart 2 Reference only. Not available from Hensley Industries. at and aterpillar are registered trademarks of aterpillar, Inc. 550 Specialized Wear Protection Rippers

3 R550 R500 R550 R500 Rippers For ozers & Loaders aterpillar Style HX Weld-on Segment lb / kg R550 SERIES 9N4621HX lb / 78.5 kg R500 SERIES HX Weld-on Segment 96.0 lb / 43.5 kg x 2.6 slot ia HX Weld-on Segment lb / 73.5 kg R500 SERIES 4.6 1U3630HX Weld-on Segment (uses old style center snap ring pin) lb / kg HX Weld-on Segment 98.0 lb / 44.5 kg WN Weld-on Nose 46.9 lb / 21.3 kg 9W8365HX (3.62 Thick Shank) 84.0 lb / 38.1 kg 9W8365EXT 94.0 lb / 42.6 kg x slot x 2.2 slot ia. 1.6 ia at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 551

4 R500 R450 R500 R450 Rippers For ozers & Loaders aterpillar Style R500 SERIES ONTINUE 6Y9704HX lb / 53.3 kg 5.6 6Y8960HHX lb / 58.1 kg 5.5 1U3644HX 91.0 lb / 41.3 kg x 2.2 slot ia x 2.0 slot X 1.5 SLOT R450 SERIES 1U3644HHX lb / 55.3 kg 6Y8960HX (4.0 Thick Shank) 85.0 lb / 38.5 kg 9U9694HX Weld-on Segment 43.5 lb / 19.7 kg x 3.2 slot X 1.5 SLOT 1.6 ia R450 SERIES 7J1791HX Weld-on Segment (uses old style center snap ring pin) lb / 74.8 kg E8418HX Weld-on Segment lb / 68.0 kg T9776WN Weld-on Segment (uses old style center snap ring pin) 36.8 lb. / 16.7 kg at and aterpillar are registered trademarks of aterpillar, Inc. 552 Specialized Wear Protection Rippers

5 R450 R200 R450 R200 Rippers For ozers & Loaders aterpillar Style R450 SERIES ONTINUE 20WN Weld-on Nose 24.5 lb / 11.1 kg 6J8814HX 24.5 lb / 11.1 kg 6J8814WHX 53.2 lb / 24.1 kg 1.4 ia. (2 HOLES) ia. (2 Holes) R350 SERIES 3.1 8E1848HX 52.0 lb / 23.6 kg 5.0 9W7488WN Weld-on Nose 18.5 lb / 8.4 kg J3139HX Ripper Shank lb / 52.6 kg ia ia WN Weld-on Nose 9.6 lb / 4.4 kg R300 SERIES 9J6586HX Ripper Shank 51.3 lb / 23.3 kg Uses 2K6413P pin with (2) 35325P (3 x 15/32 cotter keys) R200 SERIES 8J7525WN Weld-on Nose 2.4 lb / 1.1 kg ia. 3.6 at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 553

6 RIPPER TEETH FOR OZERS & LOERS aterpillar Style R Type 1 (enterline) Type 2 (Non-enterline) Type 3 (Tiger) Type 4 Type 5 (Non-enterline) RIPPER TEETH FOR OZERS N LOERS imensions Tooth Series Ripper Tooth Part No. Type Overall Tooth Tooth Pocket Weight Fasteners " mm " mm " mm " mm lb kg 9W4551HX E2229P, R550 9W4552HX W 6Y3552HX or T9W Y2443P* 4T5501HX T5502HX G6503HX T4502HX Y3909P/ R500 4T4707W 4T4503HX or 3G6502HHX G0500P* T3G T3G G6503LW W2451HX T4452HX W2452HX T5451HX Y3394P/ 8E5559W R450 4T5452HX or 4T4452HX J9600P* 4T4453HX T6J T9W * Old Style enter Snap Ring Pin at and aterpillar are registered trademarks of aterpillar, Inc. 554 Specialized Wear Protection Rippers

7 R RIPPER TEETH FOR OZERS & LOERS aterpillar Style Type 1 (enterline) Type 2 (Non-enterline) Type 3 (Tiger) Type 4 Type 5 (Non-enterline) RIPPER RIPPER TEETH TEETH FOR OZERS FOR OZERS N LOERS N LOERS ONTINUE imensions Tooth Series Ripper Tooth Part No. Type Overall Tooth Tooth Pocket Weight Fasteners R350 R300 R350 Old Style " mm " mm " mm " mm lb kg 6Y0352HX Y0359HX T6Y W2678P/ 6Y9459W 6Y0309HX J6583P/ T9J Y9459W 9J8920HX J2358P/ T9J Y9459W 7J3310HX J3312HX J9000P T7J * Old Style enter Snap Ring Pin at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 555

8 Replacement Parts For Motor Graders aterpillar Style R RIPPER SHNKS, WEL-ON NOSES, TEETH, PINS N WSHERS FOR MOTOR GRERS Machine Model 12G 14G Weld-On Nose or Shank 9J6586HX (Straight) 12WN (Nose) 9J3139HX (Straight) Teeth Fasteners enterline Penetrator Tiger Pin Washer - 6Y0309HX T9J8910HX 9J6583P 6Y9459W 16G 9J3139SHX (Segment) 6Y0352HX 6Y0359HX or T6Y0352HX or 9W2678P 6Y9459W 9W7488WN (Nose) 9J8920HX T9J8920HX RIPPER SHNKS 9J6586HX 51.3 lb / 23.3 kg Uses 2K6413P pin with (2) 35325P (3 x 15/32 cotter keys) J3139HX lb / 52.6 kg ia. 2.1 ia at and aterpillar are registered trademarks of aterpillar, Inc. 556 Specialized Wear Protection Rippers

9 R Replacement Parts for Motor Graders aterpillar Style Type 1 (enterline) Type 2 (Non-enterline) Type 3 (Tiger) Ripper Tooth Part No. Type RIPPER TEETH FOR MOTOR GRERS imensions Overall Tooth Tooth Pocket Weight " mm " mm " mm " mm lb kg 6Y0309HX T9J J8920HX T9J Y0352HX T6Y Y0359HX at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 557

10 Scarifier Parts for Motor Graders aterpillar Style S SRIFIER TIPS N SHNKS FOR MOTOR GRERS Type Universal (Front and Rear Notches) Straight lock (Rear Notch) V-lock (Front Notch) V-lock (Front and Rear Notches) Scarifier Shank 101HX 56251HX 9F5124HX 101HX Tip, Standard 5946HX 5946HX 5946HX 5946HX Tip, Heavy uty 25572HX 25572HX 25572HX 25572HX NOTE: ll scarifier shanks utilize 13537HX wedge pins. 5946HX 2.1 lb / 0.9 kg 25572HX 3.0 lb / 1.4 kg at and aterpillar are registered trademarks of aterpillar, Inc. 558 Specialized Wear Protection Rippers

11 S Scarifier parts FOR MOTOR GRERS aterpillar Style H J K L M N E FG H J K L Type 2 Type 3 SHNKS FOR MOTOR GRERS imensions Shank Type E F G Part No. " mm " mm " mm " mm " mm " mm " mm 9F5124HX HX HXL SHNKS FOR MOTOR GRERS ONTINUE imensions Shank Weight H J K L M N Part No. " mm " mm " mm " mm " mm " mm lb kg 9F5124HX HX HXL at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 559

12 Ripper Guards aterpillar Style Ripper RIPPER GURS ura 6J8814 8, lb / 14.2 kg ura 9W , lb / 39.5 kg R HX lb / 75.3 kg HX lb / 74.4 kg at and aterpillar are registered trademarks of aterpillar, Inc. 560 Specialized Wear Protection Rippers

13 scarifier scarifier Shank & leaner ar Shank aterpillar Style M/G SRIFIER SHNK ura 9F lb / 5.2 kg LENER R SHNK ura 5V lb / 8.9 kg at and aterpillar are registered trademarks of aterpillar, Inc. Rippers Specialized Wear Protection 561

14 Teeth & Fasteners Esco Style Parts Teeth TEETH imensions Hensley Fastener Overall Tooth Tooth Pocket Weight Tooth escription Part No. Pin Lock mm mm mm mm lb kg 25R11HX Tooth, Ripper 25RP 25R R12HX Tooth, Ripper R12HX R14HX Tooth, Ripper R15HX Tooth, Ripper R14HX Tooth, Ripper R15HX Tooth, Ripper 35RP 35R R15HX Tooth, Ripper RWTHX Twin Tiger 35RP 35R R17HX Tooth, Ripper R16HX Tooth, Ripper 39RP 39R T35R15* Tiger 35RP 35R TEETH FSTENERS Pin Rubber ushing Steel ushing (Slag) 25RP 25R 25RS 35RP 35R 35RS 39RP 39R N/ 562 Specialized Wear Protection Rippers

15 Shank & Weld-On Noses Esco Style Parts SHNK GUR REPLEMENTS 39RSLHX Used with Esco 39R Series Extreme uty Ripper Shanks Fastens with (2) 39RSPP Pins 77.0 lb / 34.9 kg I 15.5 WEL-ON NOSES imensions Hensley Weight Tooth Series Part No. mm mm mm lb kg 25RNHX 25R Rippers Specialized Wear Protection 563

16 Replacement Replacement Parts for ozers & Motor Graders Komatsu Style RIPPER TEETH, SHNK GURS, N SEGMENTS Model Tooth Optional Tooth Tooth Pin 40/ / / S-1 66S-1 60/ S-3 75S-5 85E-SS /X HX HX HX HX S-HX T T S-HX T R P Lower Segment Optional Guard Guard Pin P P HX P HX 17M HX HX HX P P HX P HX P HX P HX HX P HHX HX T PHX HHX SHX PL HX HX HX HX HX T19M G HX resser T H1HX P P PL 564 Specialized Wear Protection Rippers

17 Teeth Teeth For ozers & Motor Graders Komatsu Style TEETH imensions Hensley Part No. Overall Tooth Tooth Pocket Weight " mm " mm " mm " mm lb kg HX XH S-HX T N/ N/ HX T N/ N/ S-HX HX T N/ N/ HX HX HX HHX PHX SHX HX T19M N/ N/ HX H1HX Rippers Specialized Wear Protection 565

18 Segments For ozers Komatsu Style Segments WEL-ON SEGMENTS HX lb / 57.1 kg HX lb / 89.8 kg ia I ' 17M HX lb / 50.8 kg Specialized Wear Protection Rippers

19 s s For ozers & Motor Graders Komatsu Style SHNK GURS HX lb / 49.9 kg HHX lb / 52.6 kg ia HX 54.0 lb / 24.5 kg HX 51.7 lb / 23.5 kg ia Section ia. 1.4 ia Rippers Specialized Wear Protection 567

20 Guards & Pins for ozers Komatsu Style Guards & SHNK GURS ONTINUE HX 33.6 lb / 15.3 kg HHX lb / 70.8 kg R M HX 38.4 lb / 17.4 kg 17M HX 38.4 lb / 17.4 kg PINS imensions Hensley Part No. " mm " mm P P P P PL Specialized Wear Protection Rippers

21 Scarifier Scarifier Shank OEM Style SRIFIER SHNK 8110HX 13.6 lb / 6.2 kg Rippers Specialized Wear Protection 569

22 ox RIPPERS FOR EXVTORS Miscellaneous ox System Operating Weight (lb) ,000-39, ,000-59,000 TYPIL MHINE USGE J.I. ase aterpillar aewoo eere Hitachi Hyundai 9010, , , 312, , 225, 320, ,000-84, , , H , 590 EX100, EX150 R130L, R180L H220L 690, 790 EX200 R200L H280, , , H EL , , L, EX270L, 300 EX400-3, EX- 400L-3 EX550, EX700 R290L, 320 R420L, R450L - System Operating Weight (lb) ,000-39, ,000-59,000 TYPIL MHINE USGE ONTINUE Kobelco Komatsu Liebherr Linkbelt Samsung SK100, SK120, SK150 SK200, 220 P120, P , 2700 SE130 P200, 210, 220 R902, 912, 922, 932 LS2800, 3400 SE210L ,000-84,000 SK300 P250, 300 R942 LS4300 SE280L, , ,000 SK400L P400L-5 R954 LS5800 SE450L , ,000 - P650L-5 R964, R PRTS NEEE FOR SYSTEM* System ox Shank ox Pin Tiger Tooth P T9J P T6Y P T9W P T9W P T3G P T3G6503 Tooth Fastener 9J6583P, 6Y9459W 9W2678P, 6Y9459W 6Y3394P, 8E5559W 6Y3394P, 8E5559W 6Y3909P, 4T4707W 6Y3909P, 4T4767W * complete system may be ordered by Kit Number. Kit No. K200 K250 K300 K350-1 K350-2 K Specialized Wear Protection Rippers

23 ox ox RIPPERS FOR EXVTORS Miscellaneous E F G RIPPER OXES imensions ox E F G Weight mm mm mm mm mm mm mm lb kg E RIPPER SHNKS imensions ox Shank E Weight mm mm mm mm mm lb kg Rippers Specialized Wear Protection 571

24 ox RIPPERS FOR EXVTORS Miscellaneous ox Weld-On Nose For Shank No. REPLEMENT NOSES imensions Weight mm mm mm lb kg 12WN W7488WN WN , WN , Specialized Wear Protection Rippers