NEMA CLAMPS JIC PANEL MOUNTING WELDNUT "JIC" STYLE COVER CLAMPS "JIC" STYLE CLAMP BRACKETS

Transcription

1 NEM LMPS JI PNEL MOUNTING WELDNUT "JI" STYLE OVER LMPS Plated Steel T304 Stainless Steel T316 Stainless Steel "JI" OVER LMP SSEMLY pplication "JI" FabTech's Style "JI" over Style lamp over is attached lamp is with attached a screw with a screw to the tapped clamp bracket of "JI" industrial electrical enclosures to seal the cover to the box. atalog No. JH JH JH JH Description over lamp - Pltd. Steel - Y over lamp - Pltd. Steel - over lamp - T304SS over lamp - T316SS Design When attached, the clamp engages the formed lip of the enclosure cover. When the screw is tightened, the clamp secures the cover to the box. The clamp has an oblong slot which permits the clamp to swing out of the way when the screw is loosened..265 x.625 SLOT Materials vailable in plated steel, T304 and T316 stainless steel. Finishes Plated steel clamps are zinc plated (clear) and zinc plated with a yellow dichromate rinse. Stainless steel clamps, both T304 and T316 are polished to a bright finish "JI" OVER LMP.555 "JI" STYLE LMP RKETS atalog No. Description JH over lamp racket - 1/ Steel - w/proj. JH over lamp racket - 1/ Steel - w/proj. JH over lamp racket - 1/ Steel JH over lamp racket - 1/ Steel JH over lamp racket - 1/ T304SS - w/proj. JH over lamp racket - 1/ T304SS - w/proj. JH over lamp racket - 1/ T304SS JH over lamp racket - 1/ T304SS JH over lamp racket - 1/ T316SS * JH over lamp racket - 1/ luminum JH over lamp racket - 1/ luminum TYP. WELD PROJETION 1/4-20 OR 1/4-28 TPPED HOLE L º "JI" LMP RKET Design pplication The FabTech's lamp "JI" racket Style lamp is available racket with is intended 1/4 20 to and be welded 1/4 28 threads, to the enclosure except to T316 accept stainless the over steel lamp. and aluminum has 1/4 28 threads only. Weld projections are optional. Design * T-316 MTERIL IS MRKED The lamp racket is available with 1/4 20 and 1/4 28 threads, except T316 stainless steel and aluminum has 1/4 28 threads only. Weld projections are optional. Materials vailable in steel, 5052 H32 aluminum, T304 and T316 stainless steel*. Finishes Steel lamp rackets are uncoated, aluminum lamp rackets have a mill finish and both T304 and T316 lamp rackets are polished to a bright finish Spicer St., kron, OH S.W. 6th St., Ocala, FL

2 NEM LMPS "JI" QUIK RELESE LMP LMP SREW (MUST E ORDERED SEPRTELY) MTG. SE TH LEVER LMP RKET (MUST E ORDERED SEPRTELY) SHIM WSHERS "JI" QUIK RELESE LMP KIT pplication The "JI" Quick Release lamp is intended to be fastened to the existing tapped clamp bracket of a "JI" junction box or "JI" wireway in place of the standard screw down clamp. It provides quick access to the box and wireway interiors Design "JI" Quick Release lamps are designed to be replacement parts for the standard "JI" cover clamps. Installation is accomplished by removing the standard cover clamp and then attaching the Quick Release lamp to the clamp bracket using the existing cover clamp screw. vailable in kit form or as individual parts. Kits Each kit contains a "JI" Quick Release lamp, installation instruction sheet and three shim washers which can be used between the clamp and bracket to adjust for proper gasket compression. The kits, as with all kits and installation sheets supplied by FabTech, are Finishes generically marked with part description only. Steel clamps are zinc plated clear. Stainless steel clamps Materials are polished to a bright finish. vailable in steel, T304 and T316 stainless steel*. * T-316 MTERIL IS MRKED Finishes Steel clamps are zinc plated clear. Stainless steel clamps are polished to a bright finish. Plated Steel T304 Stainless Steel T316 Stainless Steel LMP KITS "JI" QUIK RELESE LMP INSTLLED vailable as kits or as individual parts atalog No. Description JH "JI" Quick Release lamp Kit - T304SS JH "JI" Quick Release lamp Kit - Pltd. Steel - Y JH "JI" Quick Release lamp Kit - T316SS * LMP KIT PRTS atalog No. Description JH "JI" Quick Release lamp - T304SS JH "JI" Quick Release lamp - Pltd. Steel - Y JH "JI" Quick Release lamp - T316SS * NH Washer, 1/4-Thin - T316SS "JI" SREWS (Not supplied w/kit) atalog No. Description JH Screw - 1/ Slot - Fillister Head - Pltd. Steel - Y JH Screw - 1/ Slot - Fillister Head - Pltd. Steel - Y JH Screw - 1/ Slot - Fillister Head - Pltd. Steel - JH Screw - 1/ Slot - Fillister Head - Pltd. Steel - JH Screw - 1/ Slot - Fillister Head SS (T302) JH Screw - 1/ Slot - Fillister Head SS (T302) JH Screw - 1/ Slot - Fillister Head - T316SS "JI" OVER LMP RKETS (Not supplied w/kit) atalog No. Description JH over lamp racket - 1/ Steel - w/proj. JH over lamp racket - 1/ Steel - w/proj. JH over lamp racket - 1/ Steel JH over lamp racket - 1/ Steel JH over lamp racket - 1/ T304SS - w/proj. JH over lamp racket - 1/ T304SS - w/proj. JH over lamp racket - 1/ T304SS JH over lamp racket - 1/ T304SS JH over lamp racket - 1/ T316SS * JH over lamp racket - 1/ luminum 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

3 NEM LMPS DOOR LMP SSEMLIES WITHOUT RKET: TYPES 4 ND 12 Saves time and money in your assembly area Steel, T304 and T316 Stainless Steel 1/4 20 and 1/4 28 threads LMP SREW LMP WSHER (THIN) SPRING TYPE PH LMP SSEMLY atalog No. Description NH N-4-PH lamp ssy. - 1/ T304SS NH N-4-PH lamp ssy. - 1/ T316SS* NH N-4-PH lamp ssy. - 1/ T304SS NH N-4-PH lamp ssy. - 1/ T316SS* NH N-4-PH lamp ssy. - 1/ T304SS NH N-4-PH lamp ssy. - 1/ Plated Steel - Y atalog No. NH NH NH NH NH NH NH NH NH NH NH NH NH Description N-4 lamp ssy. - 1/ Plated Steel - Y N-4 lamp ssy. - 1/ Plated Steel - Y N-4 lamp ssy. - 1/ Plated Steel - N-4 lamp ssy. - 1/ Plated Steel - N-4 lamp ssy. - 1/ T304SS N-4 lamp ssy. - 1/ T304SS N-4 lamp ssy. - 1/ T316SS* N-12 lamp ssy. - 1/ Plated Steel - Y N-12 lamp ssy. - 1/ Plated Steel - Y N-12 lamp ssy. - 1/ Plated Steel - N-12 lamp ssy. - 1/ Plated Steel - N-12 lamp ssy. - 1/ T304SS N-12 lamp ssy. - 1/ T304SS Note: Prefix NH-40 designates tray pack. N-4 and N-12 assemblies are packed 30 per tray and there are 5 trays per carton. Use prefix NH-41 for layered carton pack. N-4 assemblies are packed 250 per carton, N-12 assemblies are packed 290 per carton. pplication Door FabTech's lamp Door ssemblies lamp ssemblies are intended are to intended be installed to be on installed on existing door clamp brackets of TYPE 4 or 12 enclosures. Design ll parts are assembled using the spring to retain the screw and washer to the clamp. The assemblies are packed in Styrofoam trays or layered in special cartons for ease of storage, disbursement from stock and assembly onto your enclosures. oth 1/4 20 and 1/4 28 threads are standard with FabTech (except T316 stainless steel has 1/4 28 threads only). See individual parts for design Materials ssemblies and dimensional are available data. in all the various metals and finishes except aluminum. The washer and spring are T316 stainless steel* in all assemblies. Materials ssemblies are available in all the various metals and finishes except Finishes aluminum. The washer and spring are T316 stainless steel* in all The assemblies. steel screw and clamp parts of the assembly are available in zinc plated (clear), zinc plated with a yellow dichromate rinse. The stainless Finishes steel clamps are polished to a bright finish. The steel screw and clamp parts of the assembly are available in zinc * T-316 MTERIL IS MRKED plated (clear), zinc plated with a yellow dichromate rinse. The stainless steel clamps are polished to a bright finish. LMP SREW LMP TYPE 4 TYPE 12 WSHER (THIN) SPRING TYPE 4 & TYPE 12 LMP SSEMLIES Spicer St., kron, OH S.W. 6th St., Ocala, FL

4 NEM LMPS DOOR LMP SSEMLIES WITH RKET: TYPES 4 ND 12 Saves time and money in your assembly area Steel, T304 and T316 Stainless Steel 1/4 20 and 1/4 28 threads LMP SREW TYPE 4 LMP WSHER (THIN) SPRING LMP RKET TYPE 4 LMP SSEMLY WITH RKET NOTE: RKETS RE ULK PKGED ND SHIPPED SEPRTELY atalog No. NH NH NH NH NH NH NH NH NH NH NH Description N-4 lamp and racket ssy. - 1/ Pltd. Steel - Y N-4 lamp and racket ssy. - 1/ Pltd. Steel - Y N-4 lamp and racket ssy. - 1/ Pltd. Steel - N-4 lamp and racket ssy. - 1/ Pltd. Steel - N-4 lamp and racket ssy. - 1/ T304SS N-4 lamp and racket ssy. - 1/ T304SS N-4 lamp and racket ssy. - 1/ T316SS* N-12 lamp and racket ssy. - 1/ Pltd. Steel - Y N-12 lamp and racket ssy. - 1/ Pltd. Steel - Y N-12 lamp and racket ssy. - 1/ T304SS N-12 lamp and racket ssy. - 1/ T304SS Note: Prefix NH-40 designates tray pack. N-4 and N-12 assemblies (less racket.) are packed 30 per tray and there are 5 trays per carton. Use prefix NH-41 for layered carton pack. N-4 assemblies (less racket) are packed 250 per carton, N-12 assemblies (less racket) are packed 290 per carton. pplication Ttapped FabTech's Door tapped lamp Door rackets lamp are rackets intended are to intended be welded to be to welded the to the enclosure and the clamp assembly is then attached with the screw. These may be installed on TYPE 4 or 12 enclosures. Design Door lamps are assembled using the spring to retain the screw and washer to the clamp. The assemblies are packed in Styrofoam trays or layered in special cartons for ease of storage, disbursement from stock and assembly onto your enclosures. lamp rackets are shipped in a separate carton. oth 1/4 20 and 1/4 28 threads are standard with FabTech (except Materials T316 stainless steel has 1/4 28 threads only). See individual parts for design Door and dimensional lamp and data. racket assemblies are available in all the various metals and finishes except aluminum. luminum lamp rackets may be purchased Materialsseparately.(see The washer page 13) and The spring washer are and T316 spring are T316 stainless Door lamp steel* and in racket all assemblies. assemblies are available in all the various metals and finishes except aluminum. luminum lamp rackets may be Finishes purchased separately (see page 13) The washer and spring are T316 The stainless steel steel* screw in all and assemblies. clamp parts of the assembly are available in zinc plated (clear), and zinc plated with a yellow dichromate rinse. The Finishes stainless steel lamps and rackets are polished to a bright finish. The steel The screw steel lamp and clamp rackets parts are of supplied the assembly unfinished. are available in zinc plated (clear), and zinc plated with a yellow dichromate rinse. * T-316 MTERIL IS MRKED The stainless steel lamps and rackets are polished to a bright finish. The steel lamp rackets are supplied unfinished. LMP SREW TYPE 12 LMP WSHER (THIN) SPRING LMP RKET TYPE 12 LMP SSEMLY WITH RKET NOTE: RKETS RE ULK PKGED ND SHIPPED SEPRTELY 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

5 NEM LMPS FST OPERTING DOOR LMPS Easy to operate Fits Type 4 and 12 enclosures T304 Stainless Steel T316 Stainless Steel LEVER *SS WSHER atalog No. NH NH NH Description Lever ssembly - 1/ T304SS Lever ssembly - 1/ T304SS Lever ssembly - 1/ T316SS* LEVER SSEMLY atalog No. NH NH NH Description Lever and lamp ssembly - 1/ T304SS Lever and lamp ssembly - 1/ T304SS Lever and lamp ssembly - 1/ T316SS* SS WSHER LEVER SSEMLY pplication Fast FabTech's Operating Fast Operating Lever and Lever Door and lamp Door ssemblies lamp ssemblies are are intended to be installed on the existing clamp brackets of TYPE 4 or TYPE 12 enclosures. WSHER T316SS (THIN) SEE TYPE 4/4X DOOR LMP FOR DIMENSIONS SPRING, T316SS LEVER ND LMP SSEMLY Design ll parts are assembled using the spring to retain the Lever ssembly, Door lamp and the T316 stainless steel washer. The Lever ssembly is furnished with a special size washer required to facilitate the proper operation of the lever. When the door is closed, the clamp engages the formed lip of the enclosure door. When the lever is depressed, the clamp secures the door in the closed position. The clamp is released by lifting up on the lever. Sealing pressure can be adjusted by rotating the lever when it is in the disengaged position. If you wish to use existing hardware and convert it to the fast operating type, individual lever assemblies may be purchased separately (see top of page). vailable with 1/4 20 and 1/4 28 threads (except T316 stainless steel which has 1/4 28 threads only). Materials vailable T304 stainless steel and T316 stainless steel*. * T-316 MTERIL IS MRKED Finishes Parts are polished to a bright finish Spicer St., kron, OH S.W. 6th St., Ocala, FL

6 NEM LMPS L.25 X SLOT pplication The Padlock Hasp is intended to be welded to the enclosure door in alignment with the Padlock Staple to provide padlocking capability. May be used on both TYPE 4 and TYPE 12 enclosures. Design The heavy duty construction of this product resists distortion under severe abuse. The slot is slightly oversized to allow greater flexibility when aligning with the Hasp. Steel T304 Stainless Steel atalog No. NH NH NH NH PDLOK HSP pplication The Padlock Staple is intended to be welded to the enclosure flange in alignment with the Padlock Hasp to provide padlocking capability. May be used on both TYPE 4 and TYPE 12 enclosures. Design Seal provision provided for security. PDLOK HSP Heavy Duty construction Steel T304 Stainless Steel PDLOK STPLE T316 Stainless Steel luminum Description Padlock Staple - Steel Padlock Staple - T304SS Padlock Staple - T316SS* Padlock Staple H32 luminum atalog No. NH NH NH NH T316 Stainless Steel luminum Description Padlock Hasp - Steel Padlock Hasp - T304SS Padlock Hasp - T316SS* Padlock Hasp H32 luminum Materials vailable in 12 ga. steel, 12 ga. T304 and T316 stainless steel and H32 aluminum. Finishes Steel Padlock Hasps are uncoated, stainless steel Padlock Hasps are polished to a bright finish. luminum Padlock Hasps have a mill finish..156 SEL PROV. (.125 DI.) PDLOK PROV PDLOK STPLE Materials vailable in 14 ga. steel, 14 ga. T304 and T316 stainless steel and H32 aluminum. Finishes Steel Padlock Staples are uncoated, stainless steel Padlock Staples are polished to a bright finish. luminum Padlock Staples have a mill finish PDLOK HSP PDLOK HSP ND STPLE SET Order sets and save time PDLOK STPLE PDLOK HSP & STPLE SET * T-316 MTERIL IS MRKED atalog No. NH NH NH NH Description Padlock Hasp and Staple Set - Steel Padlock Hasp and Staple Set - T304SS Padlock Hasp and Staple Set - T316SS* Padlock Hasp and Staple Set H32 luminum 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

7 Spicer St., kron, OH S.W. 6th St., Ocala, FL

8 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

9 Spicer St., kron, OH S.W. 6th St., Ocala, FL

10 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

11 27 - SERIES Rigid & Spring law Latches Diameter of Max. working load Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes (kg) at max. spring Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) deflection (mm) Strength (kg) /7 / MS ZN , , 613/7 SS SS , /9 SS MS ZN , , 613/7 SS SS , /9 SS MS ZN /7 SS , SS /9 SS MS ZN /7 SS , SS /9 SS MS ZN /7 SS , SS /9 SS MS ZN /7 SS SS /9 SS MS ZN /7 SS SS /9 SS MS ZN /7 SS SS /9 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN SS Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty MS ZN MS ZN SS MS ZN SS S ZN SS MS ZN SS MS ZN SS & & Spicer St., kron, OH S.W. 6th St., Ocala, FL

12 MSL /S /S SERIES Spring law Latches 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

13 Spicer St., kron, OH S.W. 6th St., Ocala, FL

14 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

15 Spicer St., kron, OH S.W. 6th St., Ocala, FL

16 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

17 Spicer St., kron, OH S.W. 6th St., Ocala, FL

18 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

19 No Keeper 750 Series No. 750 Ideal for use on heavy gasketed lids. 1/2" adjustment allows for variations in alignment. 1/2" take-up capability. Slim profile. Provision for use of a lockwire to prevent inadvertent opening or tampering. Keeper No Keeper is offered separately. Material: arbon steel zinc-plated. lso available in stainless steel. sk for No. 750-SS10. Plain finish. Weight:.04 lbs. No P No. Material Description Maximum Load Weight 750 Zinc-plated arbon Steel Standard Overcenter Draw Latch 300 lbs..34 lbs. 750-SS Stainless Steel Same as lbs..34 lbs M Stainless Steel with Same as 750-SS except furnished w/special Hook 750 lbs..36 lbs. hrome Moly Hook & Detents in nchor Plate P Zinc-plated arbon Steel Padlockable Overcenter Draw Latch 300 lbs..36 lbs SSP Stainless Steel Same as P 550 lbs..36 lbs Zinc-plated arbon Steel Standard Keeper.04 lbs. 750-SS10 Stainless Steel Same as lbs SO atch for Latch Eccentric M atch 4-1/2" to 5" length Material: Stamped Stainless Steel Length: 4-1/2" Width: 1.630" Height: 7/8" Mounting Style: Top Mount Fastener Size: #10 Weight:.26 lb 5 1/8 2 7/8 2 1/8 1 5/8 1 1/4 7/8 3/ Spicer St., kron, OH S.W. 6th St., Ocala, FL

20 Rigid wire toggle latches PROGRM 6000 No. M-770-SS Electropolished stainless steel draw latch assembly with an adjustable hook assembly. The hook can be adjusted.24" in either direction from the typical length of 1.83." Working load 1500 lbs. and ultimate load of 2,500 lbs. 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

21 60 & 61 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 / MS ZN/YP , , , 502/7 SS SS , , /9 SS MS ZN/YP , , , SS , , /7 SS MS ZN/YP , , , 502/7 SS SS , , /9 SS MS ZN/YP , , , SS , , /7 SS M M M M1 MS ZN/YP , , , 502/7 SS SS , , /9 SS MS ZN/YP , , , 502/7 SS SS , , MS ZN/YP /7 SS SS /9 SS MS ZN/YP SS /7 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) S ZN/YP SS Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty MS ZN/YP 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty S ZN/YP S ZN/YP SS S ZN/YP SS S ZN/YP SS S ZN/YP SS S ZN/YP SS S ZN/YP SS Shown in ZN/YP version M1SS & SS SS & SS M1SS & SS Spicer St., kron, OH S.W. 6th St., Ocala, FL

22 Shown in ZN/YP version SREW DJUSTMENT SREW DJUSTMENT SREW DJUSTMENT SREW DJUSTMENT M M1 SREW DJUSTMENT SREW DJUSTMENT M M1 SREW DJUSTMENT SREW DJUSTMENT 60 & 61 - SERIES djustable Latches 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

23 Diameter of Max. working load Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes (kg) at max. spring Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) deflection (mm) Strength (kg) /7 / MS ZN/YP SS MS ZN/YP SS MS ZN/YP SS MS ZN/YP SS /7 SS /7 SS MS ZN/YP /7 SS SS /9 SS THPLTES please order separately where required Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN/YP SS Dimension Guide (approx. sizes mm) Example of how to order: LTH Part No. + Material + Finish + Qty MS ZN/YP 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty MS ZN/YP MS ZN/YP SS MSZN/YP SS The unique PROLTH TM forces a panel or door against a seal, and holds firmly in two planes. safety catch is incorporated, and provision for a padlock is offered. The Junior PROLTH TM is smaller and lighter but uses the same unique principle to close a door or panel and incorporates a simple safety-catch MSZN/YP SS SS & SS mounted on a wooden block SS MSZN/YP & MSZN/YP SS & SS SS & SS Spicer St., kron, OH S.W. 6th St., Ocala, FL

24 MS ZN/YP MS ZN/YP SS SS MSZN/YP SS Safety catch version Padlock version MS ZN/YP MS ZN/YP lso available in stainless steel Junior PROLTH MS ZN/YP SS MSZN/YP SS ProLatch 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

25 Diameter of Ultimate Tensile Strength (kg) Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes version version (approximate sizes) weight order separately where required sealing pins (mm) / / MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS MS ZN/YP /7 SS SS /9 SS Dimension Guide (approx. sizes mm) Example of how to order: THOLT Part No. + Material + Finish + Qty MS ZN/YP SS SS The unique THOLT holds firmly in three directions. The integral bolt forces a panel or door to close in SS SS SS SS Spicer St., kron, OH S.W. 6th St., Ocala, FL

26 Shown in ZN/YP version atcholt 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

27 OVER-ENTRE FSTENERS HEVY DUTY PPLITIONS This robust catch incorporates a strong coil-spring which gives leveraged over-centre action against a stainless steel rod, mounted on a striker plate, with slotted mounting holes to allow for easy adjustment. 9/02094 locking unit c/w striker plate 9/02096 non-locking unit c/w striker plate leverly designed as a diecast assembly for good appearance, the catch is generally used to secure fabricated covers or access doors on large earthmovers and similar applications. It is available in both locking and non-locking versions. ase-plate is mounted on fixed member, striker plate is mounted on mating panel. The catch body is brought down so that operating 'claw' engages with striker pin, and the pivoted lever-handle is then pressed down to achieve overcentre action, forcing panels tightly together. lack powder-coated as standard. Optionally, clear zinc plated. ORDERING ODE 9/02094 Locking unit, with striker plate, black 9/02094/01 s above, FT 111 9/02096 Non-locking unit, with striker plate, black SPEIFITION. Total Length...212mm. Length to striker pin...120mm. Max width (base)...96mm D. Length (base)...30mm E. Max width (strikers)...93mm F. Hole centres (strikers)...58mm G. Hole centres (base)...75mm H. Hole Sizes (base) dia I. Hole Sizes (striker) x 20mm J. Length (striker)...72mm K. Max height (not shown)...42mm 8850-PK 8851-PK Patent Pending No. 8850/ No This 8850 Series draw latch is a die cast draw latch with an adjustable catch offered in a key-locking and non-key-locking version. The product also is offered with a stainless strap for additional security or the rubber strap where more flexibility is required. The design also provides security of unauthorized removal of the mounting fasteners since the mounting locations are not accessible when the latch is clamped down on the key-locking versions. The key-locking versions are provided with one doublebitted key. (Keyed H700D-H749D). No PK Non-key-locking with stainless strap. No PK Key-locking with stainless strap. No PK Non-key-locking with rubber strap. No PK Key-locking with rubber strap Spicer St., kron, OH S.W. 6th St., Ocala, FL

28 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

29 40, 43 & 47 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 / MS ZN /7 SS 1167/9 SS * MS ZN /7 SS SS /9 SS SF MS ZN , L 1167/7 SS 1167/9 SS L L L/152 MS ZN SS MS ZN SS MS ZN SS L L L SF & L versions in MSZN have self finish bases for welding THPLTES please order separately where required Dimension Guide (approx. sizes mm) Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN MS ZN * SS Example of how to order: LTH Part No. + Material + Finish + Qty MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty MS ZN 25 MS SF L MS SF SS * Fix with 8mm low head socket cap screws L L & L L & L & Spicer St., kron, OH S.W. 6th St., Ocala, FL

30 L L L/ L L L 40, 43 & 47 - SERIES djustable Latches 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

31 40 & 41 - SERIES djustable Latches Diameter of Maximum Ultimate Safety catch Padlock Dimensions (mm) pprox. Recommended catchplate, Optional Part Number Material Finish fixing holes adjustment Tensile version version (approximate sizes) weight order separately where required sealing pins (mm) (mm) Strength (kg) /7 / / /152 MS ZN / W SS /9 MS ZN / W SS /9 MS ZN / W SS /9 MS ZN / W SS /9 THPLTES please order separately where required Dimension Guide (approx. sizes mm) Diameter of Ultimate Dimensions (mm) pprox. Part Number Material Finish fixing holes Tensile (approximate sizes) weight (mm) Strength (kg) MS ZN W SS Example of how to order: LTH Part No. + Material + Finish + Qty MS ZN 25 Please remember to order catchplates separately where required: THPLTE Part No. + Material + Finish + Qty W MS ZN W Spicer St., kron, OH S.W. 6th St., Ocala, FL

32 / W W W / W 40 & 41 - SERIES djustable Latches 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

33 V7 Draw Latch Over-center Large and small Zinc alloy Latch Large 34 (1.34) 21 (.83) 1 (.04) ase Lock plate 21 (.84) Lever 84 (3.29) 18 (.71) Lock plug Pin 32 (1.26) lade Keeper 8 (.32) 24 (.94) 4 (.16) TUL SIZE 10 (.39) 12±0.1 (.472±.004) Ø 3.2±0.1 (.125±.004) 16 (.63) 12 (.47) 12 (.47) 35.5±0.1* (1.398±.004) Ø 3.2±0.1 (.125±.004) Door/frame separation 16±0.1 (.63±.004) *Gasket recommended to accommodate panel variations Sleek, smooth low profile design Locking and non-locking Robust, riveted, tamperresistant construction Material and Finish Zinc alloy, chrome plated or powder coated and stainless steel Performance Details Max. working load: 1200 N (270 lbf) Installation Notes Install assembly with six M3 (No. 4) flat head screws (not supplied) Keys Overmolded key S010 (pair) Part number: V7-KEYS Latch Keeper Small 31 (1.21) 18 (.71) Lock plate Lever 72 (2.84) Lock plug 14 (.57) 28 (1.09) Long pin lade 7 (.27) 20 (.79) 3 (.14) 14 (.544) 5 (.20) 12±0.1 (.472±.004) 30±0.1* (1.181±.004) Ø 3.2±0.1 Door/frame 12±0.1 (.126±.004) separation (.472±.004) *Gasket recommended to accommodate panel variations 17 (.69) ase TUL SIZE ase type 10 Small 20 Large V L - F F Finish 10 right chrome plated 20 Satin chrome plated 50 lack powder coated Part Number Selection ssembly complete with keeper L Lock style 01 Large non-locking 05 Small non-locking 11 Large locking keyed alike S-010 (2 keys supplied) 15 Small locking keyed alike S-010 (2 keys supplied) Spicer St., kron, OH S.W. 6th St., Ocala, FL

34 V2 Draw Latch Over-center Small Torsion spring to accommodate application variances Material and Finish Stainless steel or steel, zinc plated Performance Details Steel lamping force: 330 N (75 lbf) Min. 700 N (160 lbf) Max. Stainless Steel lamping force: 260 N (60 lbf) Min. 530 N (120 lbf) Max. Notes Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and gasket set Short lade 14.5 (.57) 48 (1.88) Wire Sealing 15 (.59) 35 (1.375) 13 (.50) Ø 2.4 (.09) 25 (1.00) 16 (.63) 82 (3.22) 16 (.63) 82 (3.22) 38 (1.50) 38 (1.50) TUL SIZE Long lade 19.5 (.77) Padlockable 22 (.88) 5.5 (.218) 2 places 13 (.50) 16 (.63) 25 (1.00) 107 (4.22) 12.7 (.50) Ø 9.5 (.38) 16 (.63) 82 (3.22) 64 (2.50) 38 (1.50) 14 (.562) Keeper S 2 Holes (see keeper table) Door / frame separation 6 (.25) 25 (1.00) Mounting hole 2 (.08) Ø 5.5 (.218) 2 Holes 35 (1.375) 15.5 (.607) 11 (.42) Part Number See table Order latch and keeper separately Description Latch Keeper Style S Dimension Part Number Min. Max. Steel Stainless Steel Short blade 55 (2.17) 57.3 (2.26) V V Long blade 80.7 (3.17) 83 (3.26) V ~ Wire sealing 55 (2.17) 57.3 (2.26) V V Padlockable 55 (2.17) 57.3 (2.26) V V (.135) mounting holes V V (.218) mounting holes V V Spicer St., kron, OH S.W. 6th St., Ocala, FL

35 V4 Draw Latch Over-center Large 12.7 (.50) Travel 47.5 (1.87) 21.3 (.84) 4.6 (.18) 9.1 (.36) 22.1 (.87) 20.6 (.81) 6.6 (.26) 47.5 (1.87) TUL SIZE 86.5 (3.40) Not extended Torsion spring to accommodate application variances Material and Finish Stainless steel or steel, zinc plated Performance Details Steel verage ultimate load: 3500 N (786 lbf) Stainless Steel verage ultimate load: 3800 N (850 lbf) Notes Spring loaded anchor plate compensates up to 2.3 (0.09) for irregularities in sealing and gasket set djustable Installation Door / frame separation 38.1 (1.50) (1.93) 52.3 (2.06) Ø 4.3 (.169) Min. 68 (2.68) Max. 71 (2.78) 19.8 (.78) Fixed Installation 38.1 (1.50) Ø 4.3 (.169) Door / frame separation (1.18) Position 1 Position 2 Position 3 Position Number Dimensions Min. Max (2.81) 73.7 (2.90) (2.75) 72.1 (2.84) 3 68 (2.68) 70.6 (2.78) Description Part Number Steel Stainless Steel Latch V V Keeper V V Part Number See table Order latch and keeper separately Spicer St., kron, OH S.W. 6th St., Ocala, FL

36 WING TURN LMPS Shown with strike SH Spicer St., kron, OH S.W. 6th St., Ocala, FL

37 WING TURN LMPS Shown with strike SH Spicer St., kron, OH S.W. 6th St., Ocala, FL

38 WING TURN LMPS 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

39 WING TURN LMPS Mounts into 3.00 x 3.10 opening Spicer St., kron, OH S.W. 6th St., Ocala, FL

40 Series 101- ross Ref. : DE-ST-O Series 201 Holding apacity: 110 lbs. (50 kg) Weight: 0.13 lb. (60 g) ar opens 100º, Handle 56º Supplied: GO-F One of the most affordable clamps. T-handle and straight base options available. Vertical Handle Toggle lamps 0.35 (9) 4 x Ø0.17 (4 x Ø4.4) 0.69 (17.5) 0.63 (16) 1 (25.4) (23.8) (33.3) 3.03 (77) 3.30 (83.8) 0.32 (8) Model GO-101- GO-101-SS GO-101-I GO-101-IT GO-101-T Description U-ar, Flanged ase, Straight Handle Stainless Steel Model of GO-101- U-ar, Straight ase, Straight Handle U-ar, Straight ase, T-Handle U-ar, Flanged ase, T-Handle GO (19) 0.08 (2) 1.02 (26) 0.19 (4.8) 1.06 (27) 2.02 (51.4) Series GO has hardened bushings and removable ground pins. 2 x Ø1 1 D E Unique hole pattern for flexibility in a wide range of mounting options. F1 G1 GO ase F G H N J K M GO L Model GO GO GO Holding apacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) Supplied ar Handle Opens Opens GO-S º 66º GO-S º 70º 1 1 D E F F1 G H J K L M N Weight 0.32 (8) 0.32 (8) GO-S º 67º (8) 0.20 (5) 0.70 (18) (6.4) (25.4) 0.35 (8.8) (33.5) (24.2) (34) 1.06 (27) (42) 2.01 (51.1) 0.56 (14.3) 0.50 (12.7) (19) 0.63 (16) 0.75 (19) 1.14 (29) 1.38 (35) (25.4) (43) 0.39 (10) 0.51 (13) 0.75 (19) 0.87 (22) 1.22 (31) 1.38 (35) 1.50 (38) 1.73 (44) 3.94 (100) 0.10 (2.5) 0.13 (3.2) 0.13 (3.2) 3.82 (97) 5.63 (143) 7.72 (196) 0.28 lb. (128 g) 0.37 lb. (170 g) 0.84 lb. (380 g) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

41 Series ross Ref. : DE-ST-O Series 305 ar opens 90º, Handle 175º GO has hardened bushings and removable ground pins. This unique space-saving clamp is very affordable. Vertical Handle Toggle lamps 4 x Ø D E F G J H K L M GO Holding Model Ø D E F G H J K L M Weight apctiy Supplied 150 lbs lb. GO (68 kg) GO-F (4.4) (9) (12.7) (13.5) (26.2) (15.9) (25.4) (35.2) (7.9) (12.7) (30.8) (57) (60 g) GO SS Stainless Steel Model of GO GO GO UNIQUE 330 lbs. (150 kg) 705 lbs. (320 kg) H GO-F GO-F High ase Model of GO (7) 0.31 (7.9) 0.60 (15.2) 0.75 (19) 0.77 (19.5) 1.14 (28.9) 1.06 (27) 1.54 (39) 1.73 (44) 2.53 (64.3) 1.16 (29.4) 1.50 (38.1) 1.81 (46) 2.46 (62.7) 0.31 (7.9) 2.31 (58.7) 3.46 (88.1) 0.50 (12.7) 0.75 (19) 0.87 (22.2) 1.31 (33.3) 1.97 (50.1) 2.66 (67.5) 3.69 (93.7) 5.32 (135) 0.50 lb. (230 g) 1.38 lbs. (630 g) 1 (25.4) UNIQUE SM & SM Side Mount Model of GO and GO GO H 1.21 (30.8) 0.53 (13.5) 1.03 (26.2) 0.65 (16.5) 1.02 (26) Unique hole pattern for flexibility in a wide range of mounting options. J GO SM G Model D E F G H J K L GO SM 0.31 (7.9) GO SM 0.50 (12.7) 2 (50.8) 3.06 (77.8) 1.20 (30.6) 1.97 (50.1) 2.37 (60.3) 3.80 (96.7) 1.03 (26.2) 1.54 (39.2) 0.68 (17.4) 1.04 (26.3) 0.17 (4.4) 0.28 (7) 0.22 (5.6) 0.37 (9.4) 0.12 (3) 0.16 (4) 0.76 (19.5) 1 (25.4) 1.22 (31) 1.81 (46) D E F H K L Spicer St., kron, OH S.W. 6th St., Ocala, FL

42 Series ross Ref. : DE-ST-O Series 202 Holding apacity: 200 lbs. (91 kg) Weight: 0.38 lbs (170 g) ar opens 100º, Handle 60º Supplied: GO-F Vertical Handle Toggle lamps Popular! 0.63 (16) 0.87 (22) 0.37 (9.5) Ø0.25 (Ø6.4) 1.06 (27) 1.30 (33) 1.06 (27) 1.56 (39.7) 0.50 (12.7) 4 x Ø0.20 (4 x Ø5.2) 0.25 (6.4) GO Model GO GO SS GO U GO UL GO GO GO GO GO GO GO UNIQUE H Description Fixed, Flanged ase, Straight Handle Stainless Steel Model of GO U-ar, Flanged ase, Straight Handle Extra Long U-ar 2.27 (58mm) Flanged ase, Straight Handle Fixed, Straight ase, Straight Handle Solid ar, Flanged ase, Straight Handle Solid ar, Straight ase, Straight Handle Fixed, Flanged ase, T-Handle Fixed, Straight ase, T-Handle Solid ar, Flanged ase, T-Handle Solid ar, Straight ase, T-Handle High ase Model of GO GO U (95) (95) (107) 0.38 (9.6) (23) (23) 0.13 (3.2) (33) (33) 1 1 (25.4) 2.52 (25.4) 2.52 (64) (64) (6.4) (35) 4.80 (122) 0.38 (9.6) 1.66 (42.2) UNIQUE SM Side Mount Model of GO GO H Model GO SM 0.38 (9.6) 1.06 (27) GO SM 0.93 (23.5) 0.20 (5.1) 0.20 (5.2) 1.66 (42.2) 1.56 (39.7) 0.64 (16.2) 2.36 (60) 1.35 (34.2) 2.52 (64.2) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

43 102- Holding apacity: 220 lbs. (100 kg) Weight: 0.25 lb. (115 g) ar opens 90º, Handle 65º Supplied: GO-F Vertical Handle Toggle lamps 0.33 (8.4) 4 x Ø0.19 (4 x Ø4.8) 0.94 (24) 0.55 (14) 1.54 (39) 1.14 (29) (18) (28) 3.68 (94) 0.39 (10) 0.76 (19) 0.08 (2) GO (39) 1.14 (29) 101- Holding apacity: 220 lbs. (100 kg) Weight: 0.3 lb. (135 g) ar opens 90º, Handle 65º Supplied: GO-F (8.4) (20) (30) 0.94 (24) 1.30 (33) 1.38 (35) 4.69 (119) Model GO (10) 0.55 (14) 1 (25.4) GO (55) 1.76 (45) 0.30 (7.5) 0.75 (29) 4 x Ø0.19 (4 x Ø4.8) Spicer St., kron, OH S.W. 6th St., Ocala, FL

44 106- Holding apacity: 220 lbs. (100 kg) Weight: 0.4 lb. (184 g) ar opens 82º, Handle 55º Supplied: GO-F Vertical Handle Toggle lamps 1.06 (27) 1.36 (35) (19) (29) 5.50 (140) 0.41 (10) 1.25 (32) Model 1.50 (38) 0.50 (13) 0.50 (13) GO (7.6) 0.75 (19.1) 0.25 (6.5) GO x Ø0.19 (6 x Ø4.8) Holding apacity: 400 lbs. (182 kg) Weight: 1.36 lbs. (620 g) ar opens 100º, Handle 57º Supplied: GO-F (165) 0.32 (8.1) 3.12 (79.4) 4 x Ø0.28 (4 x Ø7.2) D 7.87 (200) E Model D E F GO (35) 2.12 (54) 1.13 (28.6) 1.94 (49.2) 0.75 (19) 0.13 (3.2) GO (51) F 4.18 (106.3) 6.39 (162.4) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

45 Series ross Ref. : DE-ST-O Series 207 Holding apacity: 500 lbs. (227 kg) ar opens 100º, Handle 60º Supplied: GO-F Expanded Selection. This is the most popular vertical handle toggle clamps. Many options are available. Vertical Handle Toggle lamps Popular! 1.87 (47.6) 2.81 (71.4) D 0.75 (19) 4 x Ø0.28 (4 x Ø7.2) Model Description Weight GO Short U-ar, Flanged ase, Straight Handle 0.78 lb. (355 g) GO SS Stainless Steel Model of GO GO Short U-bar, Flanged ase, T-Handle 0.81 lb. (370 g) GO Long U-ar, Flanged ase, Straight Handle 0.81 lb. (370 g) GO Long U-ar, Flanged ase, T-Handle 0.88 lb. (400 g) GO Short U-ar, Straight ase, Straight Handle 0.78 lb. (355 g) GO Short U-ar, Straight ase, T-Handle 0.81 lb. (370 g) GO Long U-ar, Straight ase, Straight Handle 0.81 lb. (370 g) GO Long U-ar, Straight ase, T-Handle 0.88 lb. (400 g) GO Short Solid ar, Flanged ase, Straight Handle 0.75 lb. (340 g) GO Short Solid ar, Flanged ase, T-Handle 0.78 lb. (355 g) GO Long Solid ar, Flanged ase, Straight Handle 0.78 lb. (355 g) GO Long Solid ar, Flanged ase, T-Handle 0.81 lb. (375 g) GO Short Solid ar, Straight ase, Straight Handle 0.75 lb. (340 g) GO Short Solid ar, Straight ase, T-Handle 0.78 lb. (355 g) GO Long Solid ar, Straight ase, Straight Handle 0.78 lb. (355 g) GO Long Solid ar, Straight ase, T-Handle 0.81 lb. (375 g) UNIQUE H High ase Model of GO GO (154) 5.50 (140) E 1.25 (32) Model D E F ll 0.58 (14.7) 0.33 (8.3) 1.25 (31.8) 1.81 (46) 0.63 (16) 1.37 (35) 0.13 (3.2) 2.81 (71.4) 4.56 (116) 3.75 (95.2) 5.50 (139.7) F 1.81 (46) 0.28 (7.1) 6.50 (165) 0.63 (16) 2.25 (57) 2.81 (71) 1.75 (45) UNIQUE SM Side Mount Model of GO GO H 0.63 (16) G 0.96 (24) 2.62 (66.7) Model D E F G ll 0.28 (7.2) 1.12 (28.5) 0.69 (17.5) 0.24 (6.1) 1.18 (30) 1.81 (46) 0.12 (3) GO SM D E F 0.25 (6.4) (68) (48) Spicer St., kron, OH S.W. 6th St., Ocala, FL

46 Series Popular! ross Ref. : DE-ST-O Series 210 Holding apacity: 750 lbs. (340 kg) ar opens 105º, Handle 58º Supplied: GO-F Hardened bushings and removable ground pins Vertical Handle Toggle lamps 0.43 (11) 2.46 (62.5) 4 x Ø0.34 (4 x Ø8.7) D Model D E F ll 1.78 (45.3) 2.53 (64.3) 1.25 (31.8) 1.94 (49.2) 0.75 (19) 0.13 (3.2) Model Description Weight GO U-ar, Flanged ase, Straight Handle 1.40 lbs. (635 g) GO SS Stainless Steel Model of GO GO U-ar, Straight ase, Straight Handle 1.40 lbs. (635 g) GO Solid ar, Flanged ase, Straight Handle 1.50 lbs. (680 g) GO Solid ar, Straight ase, Straight Handle 1.50 lbs. (680 g) GO U-ar, Flanged ase, T-Handle 1.57 lbs. (710 g) GO U-ar, Straight ase, T-Handle 1.57 lbs. (710 g) GO Solid ar, Flanged ase, T-Handle 1.62 lbs. (735 g) GO Solid ar, Straight ase, T-Handle 1.62 lbs. (735 g) GO (224) 7.50 (202) E 1.75 (45) 2.63 (67) 0.37 (9.5) F 3.25 (82.5) 5.45 (138.5) D Series Holding apacity: 750 lbs. (364 kg) Weight: 2.18 lbs. (990 g) ar opens 100º, Handle 65º Supplied: GO-F Note the angular spindle bar. vailable with open or solid spindle bars. Solid bar can be shortened, and the supplied bolt retainer welded on. ngular bar keeps the overall height low, yet bar clearance high (19.2) 0.38 (9.6) E 4 x Ø0.31 (4 x Ø7.9) 0.37 (9.5) D F Model D E F ll Model 1.25 (31.8) GO GO GO GO (54) 1.13 (28.6) 2.06 (52.4) Description 0.56 (14.3) Open bar, Flanged ase Open ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase 1.63 (41.3) GO (219) 9.69 (246) 1 (25.4) 2.50 (64) 4.56 (116) 0.87 (22.2) 0.19 (4.8) 0.4 (11) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

47 Series Holding apacity: 880 lbs. (400 kg) ar opens: 85º, Handle 58º Supplied: GO-S Hardened bushings and removable ground pins This rugged yet smooth fuctioning clamp is designed for use in ovens. It has a rounded handle with no plastic cover. Vertical Handle Toggle lamps Welder s hoice! 9.37 (238) 1 (25.4) GO (50.8) 4 x Ø0.41 (4 x Ø11) Model Description Weight GO Long ar lbs. (870 g) GO Short ar (6) (36) (30) 1.85 lbs. (840 g) 2.24 (57) 1.57 (40) 1.97 (50) 2.76 (70) Series ross Ref. : DE-ST-O Series 247 Holding apacity: 1,000 lbs. (450 kg) Weight: 2.76 lb. (1250 g) ar opens 100º, Handle 58º (with roll pin) ar opens 135º, Handle 70º (without roll pin) Supplied: GO-S Hardened bushings and removable ground pins 0.53 (13.4) 3.13 (79.4) 4 x Ø0.34 (4 x Ø8.7) 8.87 (225) 9.50 (241) Roll Pin Position Model D ll Model 1.78 (45.2) 2.53 (64.3) 0.89 (22.6) Description 1.25 (31.8) 2 (51) 2.63 (67) 0.20 (5) 0.13 (3.2) GO GO GO GO U-ar, Flanged ase U-ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase GO (126.4) D 2 (50.8) 0.37 (9.5) Spicer St., kron, OH S.W. 6th St., Ocala, FL

48 101-H Holding apacity: 1,000 lbs. (450 kg) Weight: 2.69 lb. (1220 g) ar opens 101º, Handle 63º Supplied: GO-S Vertical Handle Toggle lamps 11 (280) 2.36 (60) 4 x Ø0.35 (4 x Ø9) Model GO-101-H 0.82 (20.8) 0.16 (4) GO-101-H 1.69 (43) 2.76 (70) 4.92 (125) 1.57 (40) 2.76 (70) Series 101-J ross Ref. : DE-ST-O Series 267 Holding apacity: 1,200 lbs. (550 kg) Weight: 5.6 lb. (2,540 g) ar opens 100º, Handle 48º (with roll pin on top) ar opens 140º, Handle 60º (with roll pin on bottom) Supplied: GO-S Hardened bushings and removable ground pins 0.66 (17) 3 (76.2) 2 (51) D 12 (305) 6.02 (153) Model D ll 2.75 (70) 3.75 (95.2) 1.25 (31.8) 0.50 (13) Top Pin Pos (83) ottom Pin Pos. Model GO-101-J Description U-ar, Flanged ase 0.24 (6) GO-101-JS Solid ar, Flanged ase GO-101-J 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

49 Series Holding apacity: 50 lbs. (22.7 kg) Weight: 0.06 lb. (25 g) ar opens: 90º, Handle 60º Supplied: GO-S (Nylon) Horizontal Handle Toggle lamps 0.09 (2.4) 0.17 (4.4) 0.94 (23.8) 0.63 (16) 0.41 (10.4) Low GO Model D ll Model 0.38 (9.6) 0.19 (4.76) 0.40 (10.2) Description 0.40 (10.2) 0.95 (24.2) 0.53 (13.5) 0.47 (12) 0.15 (4) 0.63 (15.9) 0.05 (1.2) GO GO GO GO High ar, Flanged ase High ar, Straight ase Low ar, Flanged ase Low ar, Straight ase 1.03 (26.14) D 0.94 (23.8) 2.81 (71.46) Series 201 ross Ref.: DE-ST-O Series 205 Holding apacity: 60 lbs. (27 kg) Weight: 0.09 lb. (40 g) ar opens: 90º, Handle 80º Supplied: GO-S (Nylon) This compact clamp is the most economical horizontal toggle clamp. Most suitable for holding down sheet metal or circuit boards. Many spindle bar and base combinations available (8) Ø0.17 (Ø4.3) (23.8) (16) GO-201 Series 0.79 (20) 3.04 (77.11) 0.17 (4.4) Model Ø D E ll Model 0.19 (4.83) 0.37 (9.4) 0.37 (9.4) Description 0.08 (2) 0.69 (17.5) GO-201 U-ar, Flanged ase GO-201-SS Stainless Steel Model of GO-201 GO-201-I U-ar, Straight ase GO-201-L U-ar, Left Hand Flanged ase GO-201-R U-ar, Right Hand Flanged ase GO-201- Fixed ar, Flanged ase GO-201-SS Stainless Steel Model of GO-201- GO-201-I Fixed ar, Straight ase GO-201-L Fixed ar, Left Hand Flanged ase GO-201-R Fixed ar, Right Hand Flanged ase GO-201 GO (17) 1.02 (26) 0.13 (3.2) GO-201- Series D E 0.87 (22) 0.13 (3.3) 0.71 (18) 0.44 (11.1) 0.63 (15.9) 0.94 (23.8) 3.11 (79) Spicer St., kron, OH S.W. 6th St., Ocala, FL

50 Horizontal Handle Toggle lamps & SS Holding apacity: 66 lbs. (30 kg) Weight: 0.09 lbs. (40 g) ar opens: 80º, Handle 88º Supplied (11.5) (8.3) 0.17 (4.2) GO Model D E 1.25 (32) 0.86 (22) 0.49 (12.5) ll 0.16 (4) 0.22 (5.5) 0.35 (9) 0.55 (14) 0.95 (24) 0.24 (6) 1.10 (28) 0.55 (14) D E 0.06 (1.6) Model Description 3 (76.2) GO GO SS Flanged ase Stainless Steel Model of GO Holding apacity: 66 lbs. (30 kg) Weight: 0.22 lb. (100 g) ar opens: 65º, Handle 55º Supplied 1.18 (30) 0.87 (22) 4-Ø0.18 (4-Ø4.5) 1 (25.4) 0.16 (4) GO Model GO (5) 0.35 (9) 0.95 (24) 1.48 (37.5) 1.44 (36.5) 4.33 (110) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

51 22100 & Holding apacity: 150 lbs. (68 kg) Weight: 0.24 lbs. (110 g) ar opens: 90º, Handle 90º Supplied: GO-S Horizontal Handle Toggle lamps lmost identical to the 201- model. Lighter and more affordable (22) 1.37 (35) 4 x Ø0.20 (4 x Ø5.2) GO Model 1 (25.4) 1.56 (40) 0.06 (1.6) ll 0.25 (6.4) 0.50 (12.7) 0.25 (6.4) 1.06 (27) Model Description 2.25 (57.4) 1.56 (40) GO Flanged ase 5.39 (137) GO Straight ase Series ar opens: 94º, Handle 76º D The hunch back design leaves extra room for the fingers. ll models have the red ribbed handles and come with hex bolt spindles. 4 x ØE1 E F ase G H J K G GO L M N Model GO Holding apacity 165 lbs. (75 kg) Supplied GO-S D E ØE1 F G H J K L M N Weight 1.06 (27) (5.8) (5.2) 0.66 (16.8) 0.53 (13.5) 0.37 (9.5) 0.75 (19) 0.08 (2) 1.46 (37) 1 (25.4) 4.29 (109) 0.22 lb. (100 g) GO lbs. (150 kg) GO-S (40) 1.10 (28) 0.87 (22) 0.24 (6.2) 0.22 (5.5) (26) 0.55 (14) 1 (25.4) 0.10 (2.5) 2.44 (62) 1.50 (38) 6.73 (171) 0.50 lb. (230 g) GO lbs. (250 kg) GO-S (47) 1.22 (31) 1.02 (26) 0.35 (9) 0.26 (6.6) (26) 0.69 (17.5) 1.34 (34) 0.12 (3) 3.11 (79) 1.65 (42) 8.62 (219) 0.95 lb. (430 g) Spicer St., kron, OH S.W. 6th St., Ocala, FL

52 Series 201- ross Ref.: DE-ST-O Series 215 Holding apacity: 200 lbs. (90 kg) Weight: 0.29 lb. (130 g) ar opens: 85º, Handle 60º Supplied: GO-F Horizontal Handle Toggle lamps Popular! (36) (22) For Solid ar Ø 0.20 (5.2) 1.25 (32) 0.50 (12.5) GO-201- Model Description Ø 1.44 (37) 1 (25.4) 0.08 (2) GO-201- GO-201-SS GO-201-I GO-201-S GO-201-SI U-ar, Flanged ase Stainless Steel Model of GO-201- U-ar, Straight ase Solid ar, Flanged ase Solid ar, Straight ase 0.45 (7.4) 0.28 (7.1) 0.16 (4) 2.17 (55) 0.28 (7) 1.06 (27) 1.45 (37) 5.43 (138) UNIQUE 201-H High ase Model of GO-201- Weight: 0.32 lbs. (146 g) 0.50 (12.5) 1.66 (41.4) GO-201-H 2.17 (55) 1.45 (37) UNIQUE 201-SM Side Mount Model of GO-201- Weight: 0.36 lbs. (163 g) 0.50 (12.5) 0.12 (3) 0.69 (17.4) 1.77 (45) GO-201-SM Model D E ll 0.20 (5.1) 1.04 (26.4) 0.70 (17.8) 0.24 (6.1) 0.87 (22.1) D E 1.42 (36) 2.10 (53.25) 1.73 (44) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

53 20820 ross Ref.: DE-ST-O Model 317-U Holding apacity: 220 lbs. (100 kg) Weight: 0.88 lbs. (400 g) ar opens: 185º, Handle 60º Supplied: GO-F Mount vertically and horizontally Horizontal Handle Toggle lamps 8 x Ø0.26 (8 x Ø6.7) 4.50 (114) 1.50 (38) D 2.75 (70) GO (163) 1.25 (32) E 2.68 (68) 1.25 (32) F Model D E F GO (9) 0.63 (16) 1 (25.4) 0.63 (16) 0.63 (16) 0.63 (16) Series 203-F & 202-F Holding apacity: 500 lbs. (227 kg) ar opens: 85º, Handle 58º Supplied: GO-F (47) (29) 4 x Ø0.28 (4 x Ø7) GO-203-F 1.34 (34) D 1.61 (41) 2.24 (57) 7.80 (198) GO-202-FL Model Description D E Weight GO-203-F GO-203-FL GO-202-F GO-202-FL U-ar, Flanged ase Long U-ar, Flanged ase U-ar, Side Mounted Long U-ar, Side Mounted 2.24 (57) 3.70 (94) 2.05 (52) 3.50 (89) 0.31 (8) 0.63 (16) 0.12 (3) 1 (25.4) 0.75 lb. (340 g) 0.84 lb. (380 g) 0.85 lb. (385 g) 0.94 lb. (425 g) 2.26 (60) 1.65 (42) E D 2.42 (62) 7.80 (198) Spicer St., kron, OH S.W. 6th St., Ocala, FL

54 Series 225-D ross Ref.: DE-ST-O Series 225 Holding apacity: 500 lbs. (227 kg) Weight: 0.59 lbs. (265 g) ar opens: 90º, Handle 65º Supplied: GO-F This is the most popular horizontal handle toggle clamp. See Series GO for extra long U-ars. Horizontal Handle Toggle lamps Popular! 1.42 (35) 0.87 (22) 4 x Ø0.26 (4 x Ø6.7) 0.82 (21) 0.50 (12.7) 1.37 (35) 1.88 (48) GO-225-D Model Description GO-225-D GO-225-DSS GO-225-DI UNIQUE 225-DH U-ar, Flanged ase Stainless Steel Model of GO-225-D 0.33 (8.3) 0.25 (6.4) U-ar, Straight ase High ase Model of GO-201- Weight: 0.63 lbs. (286 g) 0.50 (12.7) 1 (25.4) 2.75 (70) 1.50 (38) 6.61 (168) 6.61 (168) 0.26 (6.7) 2.13 (54) GO-225-DH 2.75 (70) 1.50 (38) UNIQUE 225-DSM Side Mount Model of GO-201- Weight: 0.69 lbs. (315 g) 0.50 (12.7) 1.07 (27) D 2.65 (67) 1.13 (28.6) GO-225-DSM 1.71 (43.4) 2.63 (66.8) 1.95 (49.4) Model D ll 0.26 (6.7) 1.07 (27.3) 0.65 (17) 0.23 (5.9) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

55 Series Holding apacity: 550 lbs. (250 kg) ar opens: 96º, Handle 88º Supplied: GO-F Expanded selection. Larger version of Series 225-D Horizontal Handle Toggle lamps (35) (22) E 0.28 (7.1) ØF 0.25 (6.4) 1.25 (32) 0.56 (14.3) 0.13 (3.2) GO Model Description D Weight 0.25 (6.4) 1 (25.4) 1.25 (32) GO GO GO GO Short U-ar, Flanged ase Short U-ar, Straight ase Short Solid ar, Flanged ase Short Solid ar, Straight ase 1.31 (33.3) 2.81 (71.4) 2.99 (76) 1.81 (46) 7.28 (185) 0.63 lb. (285 g) 0.66 lb. (300 g) 2.19 (56) D GO GO GO GO Long U-ar, Flanged ase Long U-ar, Straight ase Long Solid ar, Flanged ase Long Solid ar, Straight ase 1.13 (28.7) 6.50 (165) 6.56 (167) 1.63 (41) (278) 0.78 lb. (360 g) 0.81 lb. (365 g) Model E ØF ll 0.33 (8.4) 0.33 (8.3) Holding apacity: 550 lbs. (250kg) Weight: 0.46 lb. (209 g) ar opens: 72º, Handle 72º Supplied 1.50 (38) 1 (25) 4 x Ø0.28 (4 x Ø7) 2 (51) 1.26 (32) 0.79 (20) GO Model GO (9.4) 0.55 (14) 1.54 (39) 0.09 (2.3) 7.83 (199) Spicer St., kron, OH S.W. 6th St., Ocala, FL

56 25382 Holding apacity: 620 lbs. (280 kg) Weight: 0.84 lb. (380 g) ar opens: 80º, Handle 80º Supplied Horizontal Handle Toggle lamps (57) (37) 4 x Ø0.41 (4 x Ø11) GO Model GO (12) 0.79 (20) 1.18 (30) 1.44 (37) 0.12 (3) 3.35 (85) 2.24 (57) Holding apacity: 660 lbs. (300 kg) Weight: 1.08 lb. (490 g) ar opens: 80º, Handle 85º Supplied: GO-S GO features an easy release lever (60) 1.57 (40) 4 x Ø0.41 (4 x Ø10.5) GO (36.5) 0.12 (3) Model GO (11) 0.79 (20) 1.46 (34) 3.35 (85) 2.28 (58) (270) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

57 Series 431 Supplied with latch plate and standard U-bolt Optional Long U-olts available Latch Type Toggle lamps ØP N M J K L 2 x ØQ GO-431 R Model Description GO SS GO-431-SS GO SS Stainless Steel Model of GO Stainless Steel Model of GO-431 Stainless Steel Model of GO D E F H 4 x ØG Model ross Ref. DE-ST-O GO GO GO Holding apacity 360 lbs. (163 kg) 700 lbs. (318 kg) 2,000 lbs. (900 kg) D E F G H J K L M N P Q R Weight 0.24 (6) 0.27 (6.8) 0.37 (9.5) 0.39 (9.9) 0.45 (11.5) 0.75 (19.1) 0.78 (19.8) 1 (25.4) 1.50 (38.1) 0.20 (5.2) 0.25 (6.4) 0.37 (9.5) 0.63 (15.9) 0.75 (19) 1.63 (41.3) 1.03 (26.2) 1.56 (39.7) 2.37 (60.3) 0.17 (4.4) 0.26 (6..7) 0.34 (8.6) 0.08 (2) 0.13 (3.2) 0.16 (4) 0.75 (19) 1.25 (31.8) 1.50 (38.1) 0.75 (19) 1.05 (26.6) 1.75 (44.5) 1.11 (28.2) 1.75 (44.4) 2.13 (54) 0.94 (24) 1.50 (38) 2.05 (52) 2.24 (57) 2.87 (73) 4.50 (114.5) 0.16 (4) 0.20 (5) 0.31 (8) 0.17 (4.4) 0.25 (6.3) 0.33 (8.5) 1.15 (29.3) 1.63 (41.3) 2.91 (74) 0.16 lb. (70 g) 0.50 lb. (225 g) 1.5 lbs. (680 g) UNIQUE Optional Long U-olts When you need a longer reach, you need the LU s; Long-Reach U-olts for use with latches. D L Thread L1 W Use with Model Thread L L1 W D Model No. GO LU GO GO LUSS (70) (31.8) (19) (4.1) GO-431-LU GO GO-431-LUSS (114) (50.4) (31.8) (5.1) GO LU GO /16-18 GO LUSS (159) (79.5) (38.1) (7.6) Series The unique latch offers dual mounting options: horizontal and vertical. Two pivot hole patterns are provided to accomodate two mounting positions. Supplied latch plate offers low profile clamping for side mounting applications. M L F N J D E GO Model GO GO GO GO Holding apacity 440 lbs. (200 kg) 550 lbs. (250 kg) 1,540 lbs. (700 kg) D E F G H J ØK L M N Weight 0.51 (13) 0.75 (19) 1.26 (32) 1.02 (26) 1.38 (35) 2 (50.5) 0.75 (19) 0.98 (25) 1.42 (36).95 (24) 1.26 (32) 1.77 (45) GO mounted on a vertical position (36) 1.89 (48) 2.50 (63.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.43 (11) 0.55 (14) 0.75 (19) G H (20.6) 1.06 (27) ØK 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 1.81 (46) 2.87 (73) 3.46 (88) 2.56 (65) 3.82 (97) 4.61 (117) 0.83 (21) 1.12 (28.5) 1.75 (44.5) 0.24 lb. (110 g) 0.67 lb. (306 g) 1.54 lbs. (700 g) Spicer St., kron, OH S.W. 6th St., Ocala, FL

58 Series Supplied with latch plate These unique latch clamps are designed for enclosure applications where the clamps are perpendicular to the latches. Latch Type Toggle lamps T G D R S K P ØJ L M ØF U 2 x ØE Q H N Model GO ross Ref. DE-ST-O GO GO GO Holding apacity 500 lbs. (225 kg) 1,000 lbs. (450 kg) 2,000 lbs. (900 kg) D ØE ØF G H ØJ K L M N P Q R S T U Weight 0.56 (14.3) 0.81 (20.6) 1.06 (27) 1 (25.4) 1.50 (38.1) 2.13 (54) 2.09 (53.3) 2.44 (61.9) 3.31 (84.1) 3.11 (79) 4.72 (120) 5.13 (130) 0.17 (4.4) 0.28 (7.1) 0.34 (8.7) 0.21 (5.3) 0.28 (7.1) 0.21 (5.3) /4-20 5/ (4) 0.28 (7.1) 0.37 (9.5) 0.16 (4) 0.25 (6.4) 0.31 (7.9) 0.08 (2) 0.12 (3) 0.16 (4) 0.51 (13) 0.75 (19.1) 1.25 (31.8) 1.02 (26) 1.31 (33.3) 1.87 (47.6) 0.19 (4.7) 0.34 (8.7) 0.50 (12.7) 2.76 (70) 4.02 (102) 5.91 (150) 0.87 (22) 1 (25.4) 1.44 (36.5) 1.04 (26.5) 1.59 (40.5) 2.28 (58) 3.09 (78.5) 4.49 (114) 6.06 (154) 1.22 (31) 1.63 (41.3) 2.37 (60.3) 0.44 (11.1) 0.39 (17.5) 0.25 lb. (113 g) 0.56 lb. (250 g) lbs. (28.6) (700 g) Series 451 These are the most popular latch clamps with adjustable single hook design. Model GO-451 has a flanged base, while Model GO-452 has a narrow base which is less tolerant to twisting motions. Stainless steel models are available. Optional Latch Plates are also available (38.1) 2 (50.8) GO-452 ase Ø0.26 (Ø6.7) H K ØG 4 x Ø J F D GO-452 E Model ross Ref.: DE-ST-O Description Holding apacity GO Flanged ase 375 lbs. (170 kg) D E F ØG H J K Weight 0.22 (5.6) 0.50 (12.7) 0.75 (19) 1.50 (38.1) 8.31 (211) 2.30 (58.4) 0.31 (8) 1.94 (49.2) 1.44 (36.5) 1.37 (34.9) lb. (270 g) Optional Latch Plate GO-451-LP GO-451-SS 351-SS Stainless Steel Model of GO-451 GO-451-LPSS GO Narrow ase 375 lbs. (170 kg) 0.26 (6.7) (38.1) 2 (50.8) 8.31 (211) 1.76 (44.8) 0.31 (8) (36.5) lb. (255 g) GO-452-LP GO-452-SS 351-SS Stainless Steel Model of GO-452 GO-452-LPSS GO Flanged ase GO Flanged ase 750 lbs. (340 kg) 1,000 lbs. (450 kg) 0.34 (8.7) 0.41 (10.3) 0.31 (7.9) 0.50 (12.7) 1.25 (31.8) 1.13 (28.6) 1.87 (47.6) 2.13 (54) (285) (336) 3.13 (79.4) 3 (76.2) 0.37 (9.5) 0.50 (12.7) 2.59 (65.7) 3.37 (85.7) 2.25 (57.3) 2.68 (68) 1.94 (49.2) 2.37 (60.3) 1.38 lbs. (624 g) GO LP 2.56 lbs. (1,130 g) GO LP 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

59 43101 ross Ref.: DE-ST-O Model 301 Holding apacity: 375 lbs. (170 kg) Weight: 0.68 lb. (310 g) Optional latch plate model GO LP Latch Type Toggle lamps (44.4) (31.6) 4 (101.6) 4 x Ø0.28 (4 x Ø7.1) F 1.63 (41) 1.89 (48) GO Model D E F GO (14.4) 0.40 (10) 0.13 (3.2) 0.75 (19) 1.37 (34.8) 0.50 (12.7) D E 8.17 (207.6) & Holding apacity: 375 lbs. (170 kg) Weight: 0.40 lb. (180 g) GO supplied with 1/4-20 hook bolt GO supplied with hex head spindle assembly (28) 1/4-20 THD G (18) G (22) 0.10 (2.5) GO Optional latch plate model GO LP GO Optional latch plate model GO LP 0.47 (12) 0.83 (21) 0.79 (20) 1.38 (35) 2 x Ø0.26 (2 x Ø6.5) 3 (76.5) & Holding apacity: 660 lbs. (300 kg) Weight: 0.85 lb. (385 g) GO supplied with 3/8-16 hook bolt GO supplied with hex head spindle assembly (36) 2 x Ø0.33 (2 x Ø8.5) 3/8-16 THD G (24) G GO Optional latch plate model GO LP GO Optional latch plate model GO LP 0.91 (23) 0.47 (12) 0.13 (3.2) 0.75 (19) 0.94 (24) 1.57 (40) 4.53 (115) Spicer St., kron, OH S.W. 6th St., Ocala, FL

60 40370 ross Ref.: DE-ST-O Model 375 Holding apacity: 4,000 lbs. (1,818 kg) Weight: 2.78 lbs. (1,260 g) oth the alloy steel base and the optional latch plate are forged for strength and durability. Latch Type Toggle lamps 3.13 (79) 2.25 (57.2) 5.71 (145) 2.20 (56) (35) (41) Ø0.41 (Ø10.3) Ø0.63 (Ø16) 9.69 (246) GO LP 3.50 (89) 0.37 (9.5) 4 (102) GO LP GO (29) Model GO (19) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) ross Ref.: DE-ST-O Model 385 Holding apacity: 7,500 lbs. (3,400 kg) Weight: 3.25 lbs. (1,480 g) 5.79 (147) 2.91 (74) This extra heavy model and optional latch plate has all forged part construction (79) (57.2) (12.7) (54) Ø Ø 8.63 (219) GO LP 2.19 (56) 3.75 (95) GO LP GO Model Ø Ø D 1.13 (29) 0.37 (10) Ø0.50 (Ø12.7) GO (10.3) 0.63 (16) 1.13 (28.6) 1.37 (34.9) D 2.25 (57.2) 2.25 (57.2) 3.37 (86) 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

61 No. 930 No. 930 Patented Designed for use in a wide range of applications. Self-adjusting, stainless steel tension springs help maintain balanced load forces. Up to 7/16" U-bolt adjustment. Padlock eye provides for up to a 3/8" diameter padlock shackle. Note: Hook not included. Order separately. Hook Options Maximum Load Rating No Max. 1500# No Max. 1000# No. 166-H Max. 300# No. 960 No. 960 Patented Extra-Heavy-Duty Draw Latch can be used in a wide variety of applications. It offers strength and durability and is rated at 8000 lbs. maximum pull. Features include: Up to 1" loop length adjustment. Safety thumb release helps ensure full locked engagement; provides a padlock eye for up to a 3/8" diameter padlock shackle. Stainless steel torsion spring automatically retracts the loop to prevent damage when not in use. Finish ody parts: E-coat Fasteners, loop and thumb release: Zinc Weight: 6.9 lbs. each No Extended Lever rm No. 970 Retractable Lever rm Note: Hook not included Spicer St., kron, OH S.W. 6th St., Ocala, FL

62 HI-TORQUE & HI-GRIP NDLMPS Diameter and Ultimate Safety pprox. Optional Part Number Material Finish of band Width Tensile atch weight Sealing (mm) (mm) Strength (kg) Pins 27-HT SS SS HT SS SS HT SS SS HT SS SS /7 SS, 613/9 SS 27-HT SS SS /7 SS, 613/9 SS 27-HT SS SS /7 SS, 613/9 SS 27-HT SS SS /7 SS, 613/9 SS 27-HT SS SS /7 SS, 613/9 SS 27SPG-HT SS SS SPG-HT SS SS SPG-HT SS SS SPG-HT SS SS /7 SS, 613/9 SS 27SPG-HT SS SS /7 SS, 613/9 SS 27SPG-HT SS SS /7 SS, 613/9 SS 27SPG-HT SS SS /7 SS, 613/9 SS 27SPG-HT SS SS /7 SS, 613/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 57-HT SS SS /7 SS, 502/9 SS 27-HGR ZN MS ZN HGR ZN MS ZN HGR ZN MS ZN HGR ZN MS ZN /7 SS, 613/9 SS 27-HGR ZN MS ZN /7 SS, 613/9 SS 27-HGR ZN MS ZN /7 SS, 613/9 SS 27-HGR ZN MS ZN /7 SS, 613/9 SS 27-HGR ZN MS ZN /7 SS, 613/9 SS 27SPG-HGR ZN MS ZN SPG-HGR ZN MS ZN SPG-HGR ZN MS ZN SPG-HGR ZN MS ZN /7 SS, 613/9 SS 27SPG-HGR ZN MS ZN /7 SS, 613/9 SS 27SPG-HGR ZN MS ZN /7 SS, 613/9 SS 27SPG-HGR ZN MS ZN /7 SS, 613/9 SS 27SPG-HGR ZN MS ZN /7 SS, 613/9 SS 620 Spicer St., kron, OH S.W. 6th St., Ocala, FL

63 27-HT 27SPG-HT 57-HT 27-HGR 27SPG-HGR HI-TORQUE & HI-GRIP NDLMPS Spicer St., kron, OH S.W. 6th St., Ocala, FL