Industrial Fastener Tools

Transcription

1 Industrial Fastener Tools T-100EN M T-100EN M

2 Table of ontents Introduction IV its Phillips Slotted Torx Torx Plus Pozidriv Sel-O-Fit Quadrex Frearson N..E Socket Head Square Recess Pipe Plug Inserts Torq-Set Mor Torq Tri-Wing Hi-Torque Triple Square it Holders Hex rive Female Square rive Hand rivers Replaceable it wls Hex rive Nutsetters, Extensions & Universal Wrenches Nutsetters Extensions Universal Wrenches /4 rive Sockets, Extensions, dapters & Universal Wrenches SE Sockets and Universal Wrenches Metric Sockets and Universal Wrenches. 37 Spline and Torx Sockets Extensions and dapters /8 rive Sockets, Extensions, dapters & Universal Wrenches SE Sockets & Universal Wrenches Metric Sockets & Universal Wrenches Spline & Torx Sockets Extensions & dapters /2 rive Sockets, Extensions, dapters & Universal Wrenches SE Sockets & Universal Wrenches Metric Sockets & Universal Wrenches Spline & Torx Sockets Extensions & dapters /8 rive Sockets, Extensions, dapters & Universal Wrenches SE Sockets & Universal Wrenches Metric Sockets Extensions & dapters /4 rive Sockets, Extensions, dapters & Universal Wrenches SE Sockets & Universal Wrenches Metric Sockets Extensions & dapters rive Sockets, Extensions & dapters SE Sockets & udd Wheel Sockets Metric Sockets Extensions & dapters /2 rive SE Sockets & dapters /2 rive SE Sockets & dapters nti-mar Protective overs µ-guard Free-Spin Engineered Solutions Special Sockets, dapters & ccessories Reversible Sockets Valve Stem rivers Ferry ap Sockets Tap Holding Sockets Grease Fitting Sockets rill Holders Extensions & dapters, Universal Wrenches & udd Wheel Sockets Socket Retaining Rings dapters Quotation Worksheets Part Number Index Registered trademarks: Pozidriv, Torq-Set, and Tri-Wing, Phillips Screw o.; pex, Sel-O-Fit, ooper Industries, Inc.; Hi-Torque, Voi-Shan; Torx and Torx Plus, amcar ivision of Textron.

3 Quick Reference its 1 24 it Holders Hand rivers 28 Hex rive Nutsetters, Extensions & Universal Wrenches /4 Sockets, Extensions, dapters & Universal Wrenches /8 Sockets, Extensions, dapters & Universal Wrenches /2 Sockets, Extensions, dapters & Universal Wrenches /8 2 1/2 Sockets, Extensions, dapters & Universal Wrenches nti-mar Protective overs Special Sockets, dapters & ccessories Part Number Index iii

4 The pex heritage of qual Precision Fit For more than half a century pex has maintained a position of leadership in industrial fastening tools. Today, pex stands ready to improve the productivity of assembly operations around the world with unsurpassed tool performance and customer service. pex quality begins with select raw materials. Only carefully chosen, high grade tool steel is used. Each tool is manufactured to the tightest tolerances in the industry...most are even tighter than licensing agreement requirements. Our bits meet the most stringent government and military specifications where applicable ( ie. MIL--9946/5 for HTS Hi-Torque bits used in aerospace assembly). am- Out rand X pplied Torque Precision fit of pex tools eliminates cam-out and premature bit failure. pex sockets, nutsetters and universal wrenches have hex tolerances that are on average 48% tighter than IN and 35% tighter than NSI requirements. With pex you are assured of an exact, sure fit. ll pex sockets and extensions have the tightest tolerances for straightness rand X Precision-manufactured pex tools are virtually wobble-free. and concentricity in the industry. Tools that run true perform better and last longer. Lasting Performance Each pex tool is tempered with our proprietary heat treating process that lets you select the degree of hardness your particular application requires. hoose from tough, non-brittle durability that stands up to torque, to the hardest heat treat available in the industry for the ultimate in wear resistance. pex offers a choice of three heat treat hardness levels in many of our screwdriver bits to match the application. These heat treats are specified by a letter suffix as follows: rand X pex bits & sockets last ten times longer than most of our competitors. X - Hardest heat treat in the industry I - Intermediate hardness R - Lowest hardness Our experienced staff can help in selecting the best heat treat for your particular application. iv

5 ity, delivery and support. Innovative Solutions Throughout our history pex has partnered with the leading fastener manufacturers to assist in the development of new fastening technologies. Today, many of these new tools that are now common can trace their history back to pex engineering. Recently pex introduced a family of protective covers to satisfy the growing demand for products that prevent in-system damage. The family includes µ-guard, FreeSpin and Engineered Products. Unsurpassed Offering This catalog contains 3,000+ of the most frequently requested bits, sockets and fastening accessories. Our entire active offering approaches 10,000 sellable part numbers. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a non-catalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific applications. You can even submit special requests on-line at our website by completing the simple forms. This flexibility has helped make pex the only manufacturer which is a market and technology leader in all of the following industrial product categories: its & it Holders, Impact Sockets, Extensions and Universal Wrenches. vailability & Service pex has approximately 2,000 authorized distributor locations globally to provide product off-the-shelf as well as knowledgeable service and support. pex stocks over 1,000 part numbers and a multitude of blanks to manufacture several thousand more in order to support our strong global distribution network. v

6 Important Notes User safety tips Selecting the proper heat treat for bits Warning lways wear safety glasses when using any tool. lways visually inspect tool for damage and cracking. Immediately replace all damaged tools. o not modify or alter any tool. o not use tools beyond their limit or useful life. ontact pex for the recommended operating torque of any tool. hoosing the proper heat treat for screwdriver tools is important in achieving long tool life. ifferent applications, different operators, and different power tools require different heat treats. pex offers a choice of three heat treat hardness levels in many of our screwdriver bits to match the particular customer s application. These heat treats are specified by a letter suffix as follows: X - The hardest heat treat in the industry I - Intermediate hardness R - Lowest hardness Selecting the heat treat best suited for a particular application may require some trial and error. The proper heat treat depends on the failure mode. If the bit breaks or shatters, select a bit with less hardness. If the failure mode is wear, select a harder bit. Many times both breakage and wear may occur within the same application. This can be due to a number of factors such a different operators, different torque values, and different power tool settings. In general, high torque applications require R heat treats to withstand twisting and resist breakage. The X heat treat is most suitable for low torque applications, particularly if hardened screws are used. If a failure occurs, a change in hardness may result in better service. The X heat treat is most common and should be selected unless the specifics of an application or an existing problem would suggest using I or R hardness. To specify a particular heat treat, add a letter suffix to the part number. For example, to specify X hardness in a #2 Phillips insert, the part number would be 440-2X. Not all pex bits are available in all heat treats. Special heat treats can be supplied for a particular application. ontact your pex representative for specific recommendations. Since X hardness is the most popular with our customers, it is our default product where X designation may omitted from the part number. For all other hardness designations, the product packaging will be marked with the appropriate hardness designation letter. Using any adapter may result in a torque overload and failure in the adapter, socket or fastener. o not use thin wall sockets with impact power tools. o not use universal wrenches with impact power tools. vi

7 Solutions What s the difference between an insert and a power bit? Insert bits are commonly used with a bit holder in power tool applications. This combination is economical, provides flexibility and allows a fastener to be magnetically held by the bit. Power bits are placed directly into the power tool chuck. See pages for a complete listing of pex bit holders. What s the advantage of reduced diameter bits? Reduced diameter bits are ideal for driving screws below the surface of drywall. What s the advantage of 27 Series bits? 27 Series bits are ideal for poorly recessed Phillips screws. wider tip design fills out an inexact recess to make better contact. Why do pex bits last so much longer? pex s premium tool alloys and proprietary heat treat help avoid typical problems such as shattering and premature bit wear. Most pex bits are available in three different heat treat hardnesses. Refer to page vi for information on selecting the proper heat treat. What s the advantage of pex R bits? Painted, coated or corroded fasteners can present special problems. pex R insert bits special wing-face ribs grip screw recesses to reduce stripping and cam-out which can result in damage to the surrounding workpiece. hoose from bits ribbed for screw removal, driving or both. They re also available in both insert bits and power drives. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website vii

8 In this section Insert and Power rive its For all these fastener styles: Phillips Pozidriv Square Recess Slotted Sel-o-fit Torq-Set Torx Quadrex MorTorq Torx Plus Frearson Tri-Wing Torx Tamper Resistant.N..E. Hi-Torque Torx Plus Tamper Resistant Socket Head Triple Square it Holders, Nutsetters, Extensions and Universal Wrenches it holders adapt hex drive and female square drive power tools to a variety of insert bits. Hex drive nutsetters, extensions and universal wrenches allow nutrunning in all types of applications. Selecting the correct Phillips point size pex bits in these five point sizes will drive NY Phillips screw viii Wood Screws Machine Screws Sheet Metal Screws Point ody Flat, Flat, Oval, Round, Truss, razier, Flat, Round, Oval, Size ia. Oval Round inding Fillister utton Stove, inding / / / /4 1/4 1/ / / /16 3/8 5/ /8 7/16 3/ /16 1/2 7/16 1/2 1/2 IMPORTNT The table above will enable you to determine the Phillips point size required for any Phillips screws or bolts. The No. 2 and No. 3 point sizes cover the range of Phillips screws most commonly used. The pex Phillips bits on the following pages are available in point sizes to drive any Phillips screw.

9 Phillips its 1/4 Hex Insert its Part Point Overall Length Number Size In. mm 440-1X X 1 1 1/ X X 1 2 1/ X X I X 2 1 1/ X X 2 2 1/ X X X 2 5 1/ X X* For shallow screw recesses 440-3X I X 3 1 1/ NX 3 1 1/4 32 Large body X X 3 2 1/ X X X 4 1 5/16 33 *For shallow screw recesses. See Tool Tip on page 7 1/4 Hex Insert its Limited learance Part Point Overall Length Turned Length () Turned O () Number Size In. mm In. mm In. mm 446-0X / X / X / S / X / I / X 2 1 1/2 38 7/ X / T 2 1 1/ TX / T 2 2 1/ / T / X* / * For shallow screw recesses see Tool Tip on page 5. 1/4 Hex Insert its R Part Point Overall Length Number Size In. mm R1-RX R1-X R1X R2-RX R2-RI R2-X R2X R2-X Limited learance R2-RX R2-X R2X R3-RX R3-X R3X Part number suffix -R For removal Part number suffix - For driving 5/16 Hex Insert its Part Point Overall Length Number Size In. mm No part number suffix For both removal and driving 480-1X 1 1 1/ X 2 1 1/ X X 2 2 1/ X X 3 1 1/ X 3 2 1/ X X 4 1 1/ NX 4 1 1/2 38 Large body X 4 2 1/2 64 5/16 Hex Insert its Part Point Overall Length Number Size In. mm R2-RX 2 1 1/ R2X 2 1 1/ R3X 3 1 1/ R4X 4 1 1/4 32 Part number suffix -R For removal Part number suffix - For driving No part number suffix For both removal and driving R is a trademark of the Phillips Screw o. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

10 Phillips its 5/16 Square Insert its Part Point Overall Length Number Size In. mm 830-1X 1 1 1/ X 2 1 1/ X 3 1 1/ X 4 1 1/8 29 1/4 Hex Power rive Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 4910X / / / X 0 2 3/4 70 1/ X 0 3 1/2 89 1/ / X / X / / / X 1 2 3/4 70 3/ X 1 3 1/2 89 3/ / X / X / / X / / / I / / / X 2 2 3/4 70 1/ I 2 2 3/4 70 1/ X 2 3 1/2 89 1/ / I 2 3 1/2 89 1/ / X / I / MM / / S / S / X / / X* / / / X* 2 2 3/4 70 1/ X* 2 3 1/2 89 1/ / X* / X* / / X / / X 3 2 3/4 70 5/ / X 3 3 1/2 89 5/ / X / X / / / X 3 2 3/4 70 1/ X 3 3 1/2 89 1/ / X / X / / X / / /4 Hex Power rive R Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-R1-RX / / / R1-X / / / R1X / / / R2-RX / / / R2-X / / / R2X / / / R2-X 2 2 3/4 70 1/ R2X 2 2 3/4 70 1/ R2-X 2 3 1/2 89 1/ / R2X 2 3 1/2 89 1/ / R2-X / R3X / / Part number suffix -R For removal Part number suffix - For driving 1/4 Hex Power rive with Finder Sleeve Part Point Overall Length Sleeve iameter Number Size In. mm In. mm S /2 89 7/ S / /16 Hex Power rive No part number suffix For both removal and driving Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 482X 2 3 1/2 89 1/ / X 3 3 1/2 89 5/ / X 4 3 1/2 89 3/ /4 57 1/4 Hex Power rive Harpoon R Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm S R / / /8 28 S R /4 70 9/ /8 48 S / * For shallow screw recesses. See Tool Tip on page /32 No. 130 Yankee rive Part Point Overall Length ody iameter Number Size In. mm In. mm 451X 1 3 1/4 83 3/ X 2 3 1/4 83 9/ X 3 3 1/4 83 5/ R is a trademark of the Phillips Screw o. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

11 Phillips its Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 501X 1 1 1/2 38 3/ X / / X 2 1 1/2 38 1/ R2X* 2 1 1/2 38 1/4 6.4 S /4 45 1/ X / / X 3 1 1/2 38 5/ *Features R anti-camout ribs. See Tool Tip on page 3. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 551X 1 1 3/ X 2 1 3/ I 2 1 3/ X 3 1 3/ /4-24 Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 401X 1 1 1/2 38 3/ X 2 1 1/2 38 1/ X 3 1 1/2 38 5/ Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 591X 1 1 3/ / X 2 1 3/ / Female Square Service rive Part Female Point Overall Length ody iameter Number Square rive Size In. mm In. mm 821 1/ / / / / /8 67 5/ / /8 67 5/ / /8 67 5/ / /8 73 5/ / /8 73 5/ / /8 73 3/8 9.5 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 3

12 Solutions oes pex offer Torx bits? Torx fasteners are becoming more and more common in automotive and appliance assembly. pex provides a full selection of bits for Torx screws. (See page 10) Torx is a trademark of the amcar ivision of Textron. Is there an easy way to select a bit? Take the guesswork out of bit selection. pex Phillips and Torx ring gauges help you find the right bit for your fasteners. Order S-3749 for Phillips and S-4064-G for Torx. What is a finder sleeve? finder sleeve makes it easy to engage slotted fasteners with the bit. It guides the bit so there is less searching for the proper alignment between blade and slot. (See page 9) Why do pex bits last so much longer than other bits? pex s premium tool alloys and proprietary heat treat help avoid typical problems such as shattering and premature bit wear. Most pex bits are available in three different heat treat hardnesses. Refer to page vi for information on selecting the proper heat treat. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a non-catalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website 4

13 What s the difference between Torx and Torx Plus bits? Torx Plus bits and fasteners feature a greater engagement area for higher torque transfer and reduced camout when driving Torx Plus fasteners. They can provide up to 100% more drive cycles. Torx Plus bits are not compatible with standard Torx fasteners. (See pages 10 12) Regular Torx oes pex offer fastener tools for the aircraft industry? pex offers a full selection of fastener tools common to aircraft assembly and maintenance, including Tri-Wing, Torq-Set, Hi-Torque and Phillips. (See pages 21-22) Torx Plus is a trademark of the amcar ivision of Textron. Torx Plus Tamper Resistent its are available on a limited basis. Please contact your rea istributor or Representative for more details. Torq-Set and R are registered trademarks of the Phillips Screw o. oes pex offer mar resistant bits and sockets? pex can nylon coat just about any of our bits or sockets. Nylon offers excellent mar resistance for assemblies that have painted, varnished or chromed surfaces. Nylon also offers some safety benefits by covering tool junctions. (See pages for more information) How do Torxalign bits work? Torxalign bits wedge into the Torx recess to firmly hold the fastener to the bit. (See page 11) What s the difference between a Phillips and a Pozidriv screw? The shallow cross indention in the screw head identifies a Pozidriv fastener. The Pozidriv bit and recess design provides contact than a standard Phillips for more torque with less possibility of camout. (See page 13) 5

14 Slotted Screw Sizes Types of Heads Note: When ordering slotted bits, please remember that head sizes and slot widths of hardened, self tapping, and sheet metal screws do not conform to the same specifications as standard wood or machine screws described in the chart below. lso, because of variations in these dimensions among screws from different manufacturers, bits should be ordered to head and slot size rather than screw size. iameter of Head Flat Head Screw Oval Head Round Head Truss inding Fillister Pan Width Sizes Wood Mach. Wood Mach. Head Head ap Mach. Head of slot / / /

15 Slotted its 1/4 Hex Insert its Limited learance Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm X 1F-2R X 2F-3R X 3F-4R X 4F-5R X 5F-6R X 6F-7R X 2F-3R 1 1/ X 3F-4R 1 1/ X 4F-5R 1 1/ X 5F-6R 1 1/ X 6F-7R 1 1/ /4 Hex Insert its Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm 445-1X 4F-5R / X 6F-8R / X 8F-10R / X 10F-12R / X 4F-5R 1 1/ / X 6F-8R 1 1/ / X 8F-10R 1 1/ / X 10F-12R 1 1/ / X 12F-14R 1 1/ / X 14F-16R 1 1/ / /16 Hex Insert its Part Screw Length lade Thickness lade Width Number Size In. mm In. mm In. mm 485-1X 4F-5R 1 1/ / X 6F-8R 1 1/ / X 8F-10R 1 1/ / X 10F-12R 1 1/ X 12F-14R 1 1/ X 14F-16R 1 1/ X 16F-18R 1 3/ / /4 Hex Power rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm X 1F-2R 1 15/ X 1F-2R 2 3/ X 1F-2R X 1F-2R 3 1/ X 1F-2R X 1F-2R X 1F-2R X 2F-3R 1 15/ X 2F-3R 2 3/ X 2F-3R X 2F-3R 3 1/ X 2F-3R X 2F-3R X 2F-3R X 3F-4R 1 15/ X 3F-4R 2 3/ X 3F-4R X 3F-4R 3 1/ X 3F-4R X 3F-4R X 3F-4R X 4F-5R 1 15/ X 4F-5R 2 3/ X 4F-5R X 4F-5R 3 1/ X 4F-5R X 4F-5R X 4F-5R X 5F-6R 1 15/ X 5F-6R 2 3/ X 5F-6R X 5F-6R 3 1/ X 5F-6R X 5F-6R X 5F-6R X 5F-6R 1 15/ X 5F-6R 2 3/ X 5F-6R X 5F-6R 3 1/ X 5F-6R X 5F-6R X 6F-8R 1 15/ X 6F-8R 2 3/ X 6F-8R X 6F-8R 3 1/ X 6F-8R X 6F-8R X 6F-8R X 8F-10R 1 15/ X 8F-10R 2 3/ X 8F-10R X 8F-10R 3 1/ X 8F-10R X 8F-10R X 8F-10R X 10F-12R 1 15/ X 10F-12R 2 3/ X 10F-12R X 10F-12R 3 1/ X 10F-12R X 10F-12R X 10F-12R X 12F-14R 1 15/ X 12F-14R 2 3/ X 12F-14R X 12F-14R 3 1/ X 12F-14R X 12F-14R X 12F-14R Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 7

16 Slotted its 5/16 Hex Power rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm 635-6X 10F-12R 2 1/ X 12F-14R 2 1/ X 14F-16R 2 1/ X 16F-20R 2 1/ X 20F-22R 2 1/ If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website Screw Shank rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm X 2F-3R 1 1/ X 4F-5R 1 1/ X 5F-6R 1 1/ X 6F-7R 1 1/ X 7F-8R 1 1/ X 8F-10R 1 1/ X 10F-12R 1 1/ /4-24 Screw Shank rive lade Width/ Part Screw Length lade Thickness ody iameter Number Size In. mm In. mm In. mm X 1F-2R 1 1/ X 2F-3R 1 1/ X 4F-5R 1 1/ X 5F-6R 1 1/ X 6F-7R 1 1/ X 7F-8R 1 1/ X 8F-10R 1 1/ X 10F-12R 1 1/ X 14F-16R 1 1/ Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

17 Slotted its 1/4 Power rive with Finder Sleeves Each finder sleeve assembly part number begins with a letter prefix that denotes the particular sleeve used with that assembly. The chart below gives complete dimensional data for each finder sleeve. G Min. Max. E Sleeve Sleeve Part Screw Max. Min. Length G iameter E No. Size In. mm In. mm In. mm In. mm L 5F-6R / /8 9.5 M 6F-6R / / P 8F-6R / / NP* 8F-10R / / R 10F-12R / S 12F-14R / T 14F-16R / / U 16F-20R / / W 20F-22R / / Y 24F-24R / / *Sleeve NP is a cup type sleeve. Slotted Power its with Finder Sleeves 1/4 Hex Power rive Part No. lade it ody omplete Part No. Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm L-320X 320-LX 5F-6R 3 3/ M-320X 320-MX 6F-8R 3 3/ P-320X 320-PX 8F-10R 3 3/ R-320X 320-RX 10F-12R 3 3/ S-320X 320-SX 12F-14R 3 7/ T-320X 320-TX 14F-16R 4 1/ /4 Hex Power rive Long Series Part No. lade it ody omplete Part No. Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm L-328X 328-LX 5F-6R 6 1/ M-328X 328-MX 6F-8R 6 1/ P-328X 328-PX 8F-10R 6 1/ R-328X 328-RX 10F-12R 6 1/ S-328X 328-SX 12F-14R 6 1/ /4 Hex Power rive Extra Short Series Part No. lade it ody omplete Part No. Screw it Length Thickness iameter ssembly it Only Size In. mm In. mm In. mm OOOL-322X LX 2F-3R 2 3/ OOL-322X - 3F-4R 2 3/ OL-322X 322-0LX 4F-5R 2 5/ L-322X - 5F-6R 2 5/ M-322X 322-MX 6F-8R 2 5/ P-322X - 8F-10R 2 5/ R-322X - 10F-12R 2 5/ /16 Hex Power rive with Finder Sleeves it ody Part Screw it Length lade Thickness iameter Number Size In. mm In. mm In. mm R-321X 10F-12R 3 7/ S-321X 12F-14R 3 7/ T-321X 14F-16R 4 1/ U-321X 16F-20R 4 1/ W-321X 20F-22R 4 1/ Y-321X 24F-24R 4 1/ See chart on page 14 for sleeve diameters. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 9

18 Torx its 1/4 Hex Insert its Part Torxalign river Overall Length Number Part Number Size In. mm 440-TX-05X - T TX-06X - T TX-07X - T TX-08X - T TX-09X - T TX-10X 440-TX-10-W T TX-15X 440-TX-15-W T TX T / TX-20X 440-TX-20-W T TX T / TX T TX-25X 440-TX-25-W T TX-27X 440-TX-27-W T TX-30X 440-TX-30-W T TX-40X 440-TX-40-W T TX-40I 440-TX-40-W T TX-45X* - T / TX-50X* - T /4 32 * Hex will break before rated ultimate torque of the Torx point is met. 5/16 Hex Insert its Part river Overall Length Number Size In. mm 480-TX-20X T / TX-25X T / TX-27X T / TX-30X T / TX-40X T / TX-40-4X T TX-45X T / TX-45-6 T TX-50X T / TX-55X T /4 32 5/16 Hex Insert its Tamper Resistant** Part river Overall Length Number Size In. mm 480-TX-40-H T-40-H / TX-45-H T-45-H / TX-50-H T-50-H / TX-55-H T-55-H /4 32 1/4 Hex Insert its Tamper Resistant** Part river Overall Length Number Size (Ref.) In. mm 440-TX-07-H T-7-H TX-08-H T-8-H TX-09-H T-9-H TX-10-H T-10-H TX-15-H T-15-H TX-20-H T-20-H TX-25-H T-25-H TX-27-H T-27-H TX-30-H T-30-H TX-40-H T-40-H ** Tamper resistant Torx screws feature a post in the center of the recess this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. ** Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. 5/8 Hex Insert its Part Hex river Overall Length Number Flat Type* Size In. mm SZ-TX-55- P T /16 40 SZ-TX-60- P T /16 40 SZ-TX-70- P T /16 40 SZ-TX TH T SZ-TX-80- TH T /16 40 *P-rill Point; TH-Thru Hole. 5/8 insert bits are used with S and RP adapters found on pages 51. 7/8 Hex Insert its Part Hex river Overall Length Number Flat Type* Size In. mm SZ-TX-90- TH T SZ-TX-100- TH T *TH-Thru Hole. 7/8 insert bits are used with RP adapters found on pages Torx and Torxalign are registered trademarks of the amcar ivision of Textron. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

19 Torx its 1/4 Hex Power rive Part river ody iameter Overall Length Number Size In. mm In. mm 49-TX-05 T / TX-05 T / TX-05 T / TX-06 T / TX-06 T / TX-07 T / TX-07 T / TX-07 T / TX-07 T TX-08 T / TX-08 T / TX-08 T / TX-08 T TX-09 T / TX-09 T / TX-09 T / TX-09 T TX-10 T / TX-10 T /4 70 S-4693 T TX-10 T / TX-10 T TX-15 T / TX-15 T / TX-15 T / TX-15 T TX-20 T / TX-20 T / TX-20 T / TX-20-5 T TX-20 T TX-25 T / TX-25 T / TX-25 T / TX-25 T TX-27 T / TX-27 T / TX-27 T / TX-27 T TX-30 T / TX-30 T / TX-30 T / TX-30 T TX-40 T / TX-40 T / TX-40 T / TX-40 T /4 Hex Power rive Torxalign Part river ody iameter Overall Length Number Size In. mm In. mm 49-TX-08-W T / TX-10-W T / TX-15-W T / TX-15-W T / TX-15-W T / TX-20-W T / TX-20-W T / TX-25-W T / TX-27-W T / TX-30-W T / TX-30-W T /2 89 1/4 Hex Power rive Tamper Resistant** Part river ody iameter Overall Length Number Size In. mm In. mm 49-TX-10-H T-10-H / TX-10-H T-10-H / TX-15-H T-15-H / TX-15-H T-15-H / TX-15-H T-15-H / TX-20-H T-20-H / TX-20-H T-20-H / TX-20-H T-20-H **Tamper resistant Torx bits are available on a restricted distribution basis. ontact your local pex representative for details. 1/4 Hex Power rive with Finder Sleeves Part river Sleeve Sleeve iameter Overall Length Number Size Number* In. mm In. mm M-32-TX-15 T-15 M /2 89 M-32-TX-20 T-20 M /2 89 NP-32-TX-25 T-25 NP /4 95 R-32-TX-27 T-27 R /8 92 S-32-TX-30 T-30 S /8 98 *See page 14 for Sleeve Selection 7/16 Hex Power rive Part river ody iameter Overall Length Number Size In. mm In. mm 48-TX-40 T / TX-45 T / TX-50 T / TX-55 T /4 95 Torx and Torxalign are registered trademarks of the amcar ivision of Textron. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 11

20 Torx its Torx Plus its Screw Shank rive Part river ody iameter Overall Length Number Size In. mm In. mm 50-TX-08 T / TX-10 T / TX-15 T / TX-20 T /2 38 1/4 Hex Insert its Part river Overall Length Number Size In. mm IPX 10IP IPX 15IP IPX 20IP IPX 25IP IPX 27IP IPX 30IP IPX 40IP Screw Shank rive Part river ody iameter Overall Length Number Size In. mm In. mm 55-TX-10 T / TX-15 T /16 30 S-4048 T / TX-20 T / TX-25 T / TX-30 T /16 30 Female Square Service rive Part river Square ody iameter Overall Length Number Size rive In. mm In. mm 834-TX-25 T / / TX T / / TX T / / TX T / / TX-45-5 T / TX-50 T / / TX-50 T / / TX M T / / /4 Hex Insert its Tamper Resistant** Part river Overall Length Number Size In. mm IPRX 10IPR IPRX 15IPR IPRX 20IPR IPRX 25IPR IPRX 27IPR IPRX 30IPR IPRX 40IPR ** Tamper resistant Torx Plus bits are available on a restricted distribution basis. ontact your local pex representative for details. 5/16 Hex Insert its Part river Overall Length Number Size In. mm IPX 30IPR / IPX 40IPR / IPX 45IPR / IPX 50IPR / IPX 55IPR / Square rive dapters with Torx Insert it Part river Overall Length it Length () Number Size In. mm In. mm sk your local pex Representative about MorTorq Super its SZ-8L-TX-70 T / SZ-TX-100 T / Torx, Torx Plus and Torxalign are registered trademarks of the amcar ivision of Textron. Torx Plus Tamper Resistent its are available on a limited basis. Please contact your rea istributor or Representative for more details. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

21 Torx Plus its 1/4 Hex Power rive Part river Overall Length Number Size In. mm 49-10IPX 10IP / IPX 10IP / IPX 10IP / IPX 15IP / IPX 15IP / IPX 15IP / IPX 20IP / IPX 20IP / IPX 20IP / IPX 25IP / IPX 25IP / IPX 25IP / IPX 27IP / IPX 27IP / IPX 27IP / IPX 30IP / IPX 30IP / IPX 30IP / IPX 40IP / /4 Hex Power rive Tamper Resistant Part river Overall Length Number Size In. mm 49-10IPRX 10IPR / IPRX 15IPR / IPRX 20IPR / IPRX 25IPR / IPRX 27IPR / IPRX 30IPR / IPRX 40IPR /16 49 ** Tamper resistant Torx Plus bits are available on a restricted distribution basis. ontact your local pex representative for details. Pozidriv its 1/4 Hex Power rive Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-PZX / / / PZX 1 2 3/4 70 3/ PZX 1 3 1/2 89 3/ / PZX / PZX / / / PZX 2 2 3/4 70 1/ PZX 2 3 1/2 89 1/ / PZX / PZX / / PZX 3 2 3/4 70 5/ / PZX 3 3 1/2 89 5/ / PZX / /4-24 Screw Shank rive 1/4 Hex Insert its Limited learance Part Point Overall Length Turned Length () Turned O () Number Size In. mm In. mm In. mm PZX / PZX / /16 Hex Insert its Part Point Overall Length Number Size In. mm PZX 1 1 1/ PZX 2 1 1/ PZX 3 1 1/4 32 Part Point Overall Length ody iameter Number Size In. mm In. mm 401-PZX 1 1 1/2 38 3/ PZX 2 1 1/2 38 1/ PZX 3 1 1/2 38 5/ /4 Hex Insert its Part Point Overall Length Number Size In. mm PZX PZX PZX 2 1 1/ PZX PZX PZX 4 1 1/4 32 Pozidriv is a registered trademark of the Phillips Screw ompany Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 591-PZX 1 1 3/ / PZX 2 1 3/ / Screw Shank rive Part Point Overall Length ody iameter Number Size In. mm In. mm 502-PZX 2 1 1/2 38 1/4 6.4 S PZ 2 1 3/4 45 1/4 6.4 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 13

22 Sel-O-Fit its Quadrex its 1/4 Hex Insert its Part Point Overall Length Number Size In. mm SFX SFX SFX 2 1 1/ SFX SFX 2 2 1/ SFX /4 Hex Insert its Part Point Overall Length Number Size In. mm 950-Q /4 Hex Power rive Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 95-Q / / / Q /4 70 1/ Q /2 89 1/ / Q / / /4 32 1/4 Hex Insert its Limited learance Part Point Overall Length Turned Length () Turned O () Number Size In. mm In. mm In. mm SFX / /16 Hex Insert its Part Point Overall Length Number Size In. mm SFX 2 1 1/4 32 1/4 Hex Power rive Part Point Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-SFX / / / SFX 1 2 3/4 70 3/ SFX 1 3 1/2 89 3/ / SFX / SFX / / / SFX 2 2 3/4 70 1/ SFX 2 3 1/2 89 1/ / SFX / Sel-O-Fit bits are designed to provide a more efficient means of driving Pozidriv screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit is a registered trademark of ooper Industries. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website 14 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

23 Frearson its.n..e. its 1/4 Hex Insert its Part Point Overall Length Number Size In. mm 440-FX ll FX ll 1 25 For limited clearance 5/16 Hex Insert it Part Point Overall Length Number Size In. mm 480-FX ll 1 3/8 35 1/4 Hex Power rive Part Screw Overall Length ody iameter Turned Length Number Size In. mm In. mm In. mm 491-FX ll 1 15/ / / FX ll 2 3/4 70 3/ FX ll 3 1/2 89 3/ / FX ll / FX ll 1 15/ / / FX ll 2 3/4 70 1/ FX ll 3 1/2 89 1/ / FX ll / FX ll 1 15/ / FX ll 3 1/2 89 5/ /2 64 The Frearson recess is designed so that any size bit will fit any size recess. hoose bits on the basis of body diameter the larger the screw, the larger the body diameter. 1/4 Hex Insert its Part Point Overall Length Number Size In. mm NE-3mm 3mm 1 1/8 29 NE-4mm 4mm 1 1/8 29 NE-5mm 5mm 1 1/8 29 NE-6mm 6mm 1 1/8 29 NE-8mm 8mm 1 1/8 29 1/4 Hex Insert its R Part Point Overall Length Number Size In. mm NE-4mm-R 4mm 1 1/8 29 NE-5mm-R 5mm 1 1/8 29 NE-6mm-R 6mm 1 1/8 29 R ribs for both removal and driving Screw Shank rive Part Screw Overall Length ody iameter Number Size In. mm In. mm 552-FX ll 1 3/ /4 Female Square rive Part Screw Overall Length ody iameter Number Size In. mm In. mm 822-F ll /4 6 3/8 Female Square rive Part Screw Overall Length ody iameter Number Size In. mm In. mm 832-F ll 2 5/8 67 1/ F ll 2 5/8 67 5/ F ll 2 5/8 67 3/8 10 R is a trademark of the Phillips Screw o. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 15

24 Socket Head Sizing hart SE Nominal Socket Head ap Screws Flat Head utton Hex Size, ap Head Set Shoulder Pressure Low Head Inches Series Series Screws ap Screws Screws Screws Plugs llenuts ap Screws , 1 1, 2 3, / , 4 3, 4 5, 6 5, 6 5/64 2, 3 3, 4 5, 6 5, /32 4, 5 5, /64 6 1/ /4 1/4 4, 5 1/4 9/ / /4 1/4 1/4 5/16 5/16 1/16 6 5/16 3/16 1/4 5/16 5/16 3/8 3/8 1/8 8, 10 3/8 7/32 5/16 3/8 3/8 7/16 7/16 1/4 5/16 7/16 1/2 1/2 1/4 1/4 1/2 5/16 3/8 3/8, 7/16 1/2 5/8 5/8 3/8 5/16 5/8 3/8 7/16, 1/2 1/2 5/8 3/4 3/4 1/2 3/8 7/16 7/16 1/2 5/8 5/8 3/4 7/8 1 1/2 9/16 3/4, 7/8 7/8 1, 1 1/8 3/4 5/8 3/ /4, 1 3/8 1 1/4 1 5/8 3/4 7/8, 1 1 1/8, 1 1/4, 1 3/8 1 1/8 1 1/2 1 1/4 3/4 7/8 1 1/8, 1 1/4 1 1/4, 1 3/8 1 1/2 7/ /8, 1 1/2 1 1/2 1 1/2 1 3/4, 2 1 3/4 1 1/2, /4 1 3/ /4 1 1/ /2 1 3/4 2 1/4, 2 1/2 1 3/ /4 Metric Nominal hex Size, Socket Head Flat Head utton Head Set Shoulder Low Head MM ap Screws ap Screws ap Screws Screws Screws llenuts ap Screws 1.5 M1.6, M1.7, M2 M3 2 M2.3, M2.5, M2.6 M3 M3 M4 2.5 M3 M4 M4 M5 3 M4 M5 M5 M6 6mm M3 M4 4 M5 M6 M6 M8 8mm M4 M5 5 M6 M8 M8 M10 10mm M5 M6 6 M8 M10 M10 M12, M14 12mm M6 M8 8 M10 M12 M12 M16 16mm M8 M10 10 M12 M14, M16 M20 20mm M10 M12 12 M14 M20 M24 M12 M14 14 M16 M16 17 M20 M16 M20, M22 19 M24 M24 16

25 Socket Head its 1/4 Hex Insert its Part Hex Overall Length Number Size In. mm X X 1/ X 5/ X 3/ X 7/ X 1/ X 9/ X 5/32 1 5/ X 3/16 1 5/ X 3/ X 7/32 1 5/ X 1/4 1 5/ X 5/16 1 1/ X 3/8 1 1/4 32 1/4 Hex Insert its Metric Part Hex Overall Length Number Size In. mm mm 1.5mm mm 2mm mm 2.5mm mm 3mm mm 4mm 1 5/ mm 5mm 1 5/ mm 6mm 1 5/ mm 7mm 1 1/ mm 8mm 1 1/ mm 9mm 1 1/ mm 10mm 1 1/4 32 5/16 Hex Insert its Part Hex Overall Length Number Size In. mm 315-3X 5/32 1 5/ X 3/16 1 5/ X 7/32 1 5/ X 1/4 1 5/ X 5/16 1 5/ X 3/8 1 5/ /16 Hex Insert its Metric Part Hex Overall Length Number Size In. mm mm 2.5mm mm 4mm 1 5/ mm 5mm 1 5/ mm 6mm 1 5/ mm 7mm 1 5/ mm 8mm 1 5/ mm 10mm 1 3/ mm 12mm 1 1/ mm 14mm 1 1/4 32 1/4 Hex Power rive Part Hex Overall Length Number Size In. mm M /16 49 M-02 1/ /16 49 M-02-5/ /16 49 M-03 3/ /16 49 M / M / M-03-7/ /16 49 M-04 1/8 1 15/16 49 M / M /8 3 1/2 89 M / M / M / M-04-9/ /16 49 M / M-05 5/ /16 49 M / M /32 3 1/2 89 M / M / M / M / M-06 3/ /16 49 M / M / M / M-07 7/ /16 49 M-08 1/4 1 15/16 49 M-10 5/ / /4 Hex Power rive Metric Part Hex Overall Length Number Size In. mm M-1.5mm 1.5mm 1 15/16 49 M-2mm 2mm 1 15/16 49 M-2.5mm 2.5mm 1 15/16 49 M-3mm 3mm 1 15/16 49 M-3mm-3 3mm 3 76 M-3mm-4 3mm M-4mm 4mm 1 15/16 49 M-5mm 5mm 1 15/16 49 M-5mm-4 5mm M-6mm 6mm 1 15/16 49 M-6mm-4 6mm M-7mm 7mm 1 15/16 49 M-8mm 8mm 1 15/16 49 M-10mm 10mm 1 15/ /16 Hex Power rive Part Hex Overall Length Number Size In. mm S-06 3/ S-10 5/ S-12 3/ Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 17

26 Socket Head its 7/16 Hex Power rive Part Hex Overall Length Number Size In. mm N-04 1/8 3 1/2 89 N-04-9/64 3 1/2 89 N-05 5/32 3 1/2 89 N / N-06 3/16 3 1/2 89 N / N-07 7/32 3 1/2 89 N / N-08 1/4 3 1/2 89 N / N-09 9/32 3 1/2 89 N-10 5/16 3 1/2 89 N / N-12 3/8 3 1/2 89 N / N-16 1/2 3 1/2 89 N / Socket Head its with Square rive dapters, SE 3/8 Square rive Part Number Overall Length dapter Insert Hex Length of Insert omplete Only Only Size In. mm In. mm SZ-9 S-314 SZ-9-3/32 2 1/ /8 35 SZ-7 S-314 SZ-7-7/64 2 1/ /8 35 SZ-10 S-314 SZ-10-1/8 2 1/ /8 35 SZ-11 S-314 SZ-11-5/32 2 1/ /8 35 SZ-12 S-314 SZ-12-3/16 2 1/ /8 35 SZ-13 S-314 SZ-13-7/32 2 1/ /8 35 SZ-14 S-314 SZ-14-1/4 2 1/ /8 35 SZ-15 S-314 SZ-15-5/16 2 1/ /8 35 SZ-16 S-314 SZ-16-3/8 2 1/ /8 35 SZ-17 S-314 SZ-17-1/2 2 1/ /8 35 SZ-18 S-314 SZ-18-9/16 2 1/ /8 35 SZ-19 S-314 SZ-19-5/8 2 1/ /8 35 7/16 Hex Power rive, Metric Part Hex Overall Length Number Size In. mm N-3mm 3mm 3 1/2 89 N-4mm 4mm 3 1/2 89 N-5mm 5mm 3 1/2 89 N-6mm 6mm 3 1/2 89 N-8mm 8mm 3 1/2 89 N-10mm 10mm 3 1/2 89 N-12mm 12mm 3 1/2 89 N-14mm 14mm 3 1/2 89 N-14mm-6 14mm /8 Hex Power rive Part Hex Overall Length Number Size In. mm P-08 1/ P-10 5/ P-12 3/ P-16 1/ P-18 9/ P-20 5/ P-24 3/ /2 Square rive Part Number Overall Length dapter Insert Hex Length of Insert omplete Only Only Size In. mm In. mm SZ-41 S-514 SZ-11-5/32 2 1/ /8 35 SZ-20 S-514 SZ-12-3/16 2 1/ /8 35 SZ-21 S-514 SZ-13-7/32 2 1/ /8 35 SZ-22 S-514 SZ-14-1/4 2 1/ /8 35 SZ-23 S-514 SZ-15-5/16 2 1/ /8 35 SZ-24 S-514 SZ-16-3/8 2 1/ /8 35 SZ-25 S-514 SZ-17-1/2 2 1/ /8 35 SZ-42 S-520 SZ-31-1/2 2 1/ /16 40 SZ-43 S-514 SZ-18-9/16 2 1/ /8 35 SZ-44 S-520 SZ-32-9/16 2 1/ /16 40 SZ-26 S-514 SZ-19-5/8 2 1/ /8 35 SZ-27 RP-520 SZ-33-5/8 2 1/ /16 40 dapters with an S prefix feature a set screw for locking in the bit. n RP prefix indicates adapters with a thru hole for a spring pin. 7/16 Hex Insert it Only Part Hex Overall Length Number Size In. mm SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / SZ / Use 7/16 Hex Insert its with 7/16 Female Hex Square drive adapters,page 26. These bits feature a thru hole on the hex flat for use with a spring pin. 18 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

27 Socket Head its with Square rive dapters, SE Socket Head dapters & Inserts, Metric 3/4 Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-30 S-720 SZ-30-3/8 2 5/ / /32 23 SZ-31 S-720 SZ-31-1/2 2 5/ / /32 23 SZ-32 S-720 SZ-32-9/16 2 5/ / /32 23 SZ-33 RP-720 SZ-33-5/8 2 5/ / /32 23 SZ-34 RP-720 SZ-34-3/4 2 5/ / /32 23 SZ-37 RP-728 SZ-37-3/4 3 1/ /8 29 SZ-35 S-720 SZ-35-7/8 2 5/ / /32 23 SZ-38 RP-728 SZ-38-7/8 3 1/ /8 29 SZ-36 RP-720 SZ / / / /8 Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-3-7-4mm S-314 SZ-7-4mm 4mm 2 1/ /8 35 7/8 22 SZ-3-7-5mm S-314 SZ-7-5mm 5mm 2 1/ /8 35 7/8 22 SZ-3-7-6mm S-314 SZ-7-6mm 6mm 2 1/ /8 35 7/8 22 SZ-3-7-8mm S-314 SZ-7-8mm 8mm 2 1/ /8 35 7/8 22 SZ mm S-314 SZ-7-10mm 10mm 2 1/ /8 35 7/ Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-80 RP-820 SZ-31-1/2 3 1/ / /32 23 SZ-85 RP-828 SZ-85-5/8 3 1/ /8 29 SZ-86 RP-820 SZ-34-3/4 3 1/ / /32 23 SZ-87 RP-828 SZ-37-3/4 3 1/ /8 29 SZ-88 S-820 SZ-35-7/8 3 1/ / /32 23 SZ-89 RP-828 SZ-38-7/8 3 1/ /8 29 SZ-91 RP-828 SZ / /8 29 SZ-101 RP-848 SZ /4 3 1/ / /8 35 n RP prefix indicates adapters with a roll pin that is inserted through the bit. 1/2 Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ-5-7-4mm S-514 SZ-7-4mm 4mm 2 1/ /8 35 7/8 22 SZ-5-7-5mm S-514 SZ-7-5mm 5mm 2 1/ /8 35 7/8 22 SZ-5-7-6mm S-514 SZ-7-6mm 6mm 2 1/ /8 35 7/8 22 SZ-5-7-8mm S-514 SZ-7-8mm 8mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-10mm 10mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-12mm 12mm 2 1/ /8 35 7/8 22 SZ mm S-514 SZ-7-14mm 14mm 2 1/ / /16 24 SZ mm RP-520 SZ-10-14mm 14mm 2 1/ / /32 23 SZ mm RP-520 SZ-10-17mm 17mm 2 1/ / /32 23 SZ mm RP-520 SZ-10-19mm 19mm 2 1/ / /32 23 Socket Head it & dapter Sets, SE PH38 PH56 8 piece, 3/8 square drive: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 6 piece, 1/2 square drive: 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 3/4 Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ mm RP-720 SZ-10-10mm 10mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-12mm 12mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-14mm 14mm 2 1/ / /32 23 SZ mm RP-720 SZ-10-17mm 17mm 2 1/ / /32 23 Socket Head it & dapter Sets, Metric PH35M 5 piece, 3/8 square drive: 4mm, 5mm, 6mm, 8mm, 10mm PH56M 6 piece, 1/2 square drive: 6mm, 8mm, 10mm, 12mm, 14mm, 17mm 1 Square rive Part Number Overall Length it dapter Insert Hex Length of Insert Length () omplete Only Only Size In. mm In. mm In. mm SZ mm RP-828 SZ-14-17mm 17mm 3 5/ /8 29 SZ mm RP-828 SZ-14-19mm 19mm 3 5/ /8 29 SZ mm RP-828 SZ-14-22mm 22mm 3 5/ /8 29 SZ mm RP-828 SZ-14-24mm 24mm 3 5/ /8 29 SZ mm RP-828 SZ-14-27mm 27mm 3 5/ /8 29 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 19

28 Square Recess its 1/4 Hex Insert its Part Point Nominal Size Overall Length Number Size In. In. mm 950-0X 0 1/ X 1 3/ X 2 1/ X 3 9/ /4 Hex Power rive Part Point Nominal Size Overall Length Number Size In. In. mm 954-0X 0 1/ / X 0 1/16 2 3/ X 0 1/ X 1 3/ / X 1 3/32 2 3/ X 1 3/32 3 1/ X 1 3/ X 2 1/8 1 15/ X 2 1/8 2 3/ X 2 1/8 3 1/ X 2 1/ X 3 9/ / X 3 9/64 2 3/ X 3 9/64 3 1/ X 3 9/ Male Square Inserts for Pipe Plugs 1/4 to 1/2 Male Square Male Male Overall Part Hex Square Length Number In. In. In. mm P /16 1/4 1 1/4 32 P /16 9/32 1 1/4 32 P /16 5/16 1 1/4 32 P /16 3/8 1 1/4 32 P /16 7/16 1 1/4 32 P /16 1/2 1 1/4 32 P /8 5/16 1 1/2 38 P /8 3/8 1 1/2 38 P /8 7/16 1 1/2 38 P /8 1/2 1 1/2 38 Note: For pipe plug inserts use S and RP bit holders found on page 26. ouble Square Recess its 1/4 Hex Power rive Part Point Overall Length Number Size In. mm X / /4 Hex Power rive Turned ody Part Point Nominal Size Overall Length Turned Length Number Size In. In. mm In. mm X 0 1/ / / X 0 1/16 2 3/ X 1 3/ / / X 1 3/32 2 3/ X 1 3/32 3 1/ / X 2 1/8 1 15/ / X 2 1/8 2 3/ X 2 1/8 3 1/ / X 2 1/ / X 3 9/ / / X 3 9/64 2 3/ X 3 9/64 3 1/ /4 70 1/4 Hex Power rive Turned ody Part Point Overall Length Turned Length Number Size In. mm In. mm / /4 70 Screw Size 3 & 4 5, 6, 7 8, 9, /4 Square Point Size For Quad-rex bits refer to page Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

29 Triple Square its Torq-Set its 1/4 Hex Insert its Part Point Overall Length Number Size In. mm 440-TSQ-4M 4mm TSQ-5M 5mm TSQ-6M 6mm TSQ-8M 8mm TSQ-10M 10mm /16 Hex Insert its Part Point Overall Length Number Size In. mm 480-TSQ-6M 6mm 1 1/ TSQ-8M 8mm 1 1/ TSQ-10M 10mm 1 1/ TSQ-12M 12mm 1 1/ TSQ-14M 14mm 1 1/4 32 1/4 Hex Power rive Part Point Overall Length Number Size In. mm 49-TSQ-4M 4mm TSQ-5M 5mm TSQ-6M 6mm TSQ-8M 8mm TSQ-10M 10mm TSQ-12M 12mm /16 Hex Power rive Part Point Overall Length Number Size In. mm 48-TSQ-5M 5mm 3 1/ TSQ-6M 6mm 3 1/ TSQ-8M 8mm 3 1/ TSQ-10M 10mm 3 1/ TSQ-12M 12mm 3 1/ TSQ-14M 14mm 3 1/2 88 1/4 Hex Insert its Part Point Overall Length Number Size In. mm /4 1/ /4 Hex Insert its R vailable with R ribs for removal only Part Point Overall Length Number Size In. mm R 6 1 1/ R 8 1 1/ R / /4-R 1/4 1 1/4 32 5/16 Hex Insert its Part Point Overall Length Number Size In. mm / / /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 5/16 Hex Insert its R vailable with R ribs for removal only Part Point Overall Length Number Size In. mm 212-1/4-R 1/4 1 1/ /16-R 5/16 1 1/4 32 Torq-Set and R are registered trademarks of the Phillips Screw ompany. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 21

30 Torq-Set its 1/4 Hex Power rive Part Point Overall Length Number Size In. mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / R* 6 1 1/ / / / / / R* 8 1 1/ / / / / / R* / / / / / /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 *Feature R anti-camout ribs. Torq-Set, R and Tri-Wing are registered trademarks of the Phillips Screw ompany. 5/16 Hex Power rive Part Point Overall Length Number Size In. mm / / /4 1/4 1 1/ /16 5/16 1 1/ /8 3/8 1 1/4 32 7/16 Hex Power rive Part Point Overall Length Number Size In. mm 170-1/4 1/4 1 1/ /4 1/4 3 1/ /4 1/ /16 5/16 1 1/ /16 5/16 3 1/ /16 5/ /8 3/8 1 1/ /8 3/8 1 1/ /8 3/ /16 7/16 1 1/ /16 7/16 1 1/ /16 7/ /16 Hex Power rive R vailable with R ribs for removal only Part Point Overall Length Number Size In. mm 170-1/4-R 1/4 1 1/ /16-R 5/16 1 1/4 32 5/8 Hex Power rive Part Point Overall Length Number Size In. mm 170-1/2 1/4 1 1/ /16 9/16 1 1/ /8 5/8 1 1/4 32 MorTorq its Part river Size/ MorTorq Overall Length Number Type Size In. mm 440-MT-00 1/4 Hex Insert MT-0 1/4 Hex Insert MT-1 1/4 Hex Insert MT-2 1/4 Hex Insert MT-3 5/16 Hex Insert 3 1 1/4 31 M-MT-0 1/4 Hex Power 0 1 5/16 31 M-MT-1 1/4 Hex Power 1 1 5/16 31 M-MT-2 1/4 Hex Power 2 1 5/16 31 N-MT-3 7/16 Hex Power 3 3 1/2 89 N-MT-4 7/16 Hex Power 4 3 1/2 89 Other drive sizes/types and point sizes can be quoted. ontact your pex istributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw ompany. 22 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

31 Tri-Wing 1/4 Hex Insert its Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW TW TW TW TW TW / TW-6 6 1/4 5/ TW-7 7 5/16 3/ /4 Hex Insert its R vailable with R ribs for removal only Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-4-R TW-5-R / /16 Hex Insert it Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TWE /4 32 TWE / /4 32 1/4 Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW /4 32 TW /4 32 TW /4 32 TW /4 32 TW /4 32 TW / /4 32 TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 TW-8 8 3/8-24 7/ /4 32 5/16 Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 TW-8 8 3/8-24 7/ /4 32 7/16 Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm Hi-Torque its 1/4 Square rive Insert its Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS / HTS / HTS / /8 Square rive Insert its Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS /4 3/ HTS /4 3/ /2 Square rive Insert its Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTS / HTS / HTS /8 1 1/ HTS /8 1 1/ HTS /8 1 1/ /4 Hex Insert its Overall ody lade lade Part Length iameter Thickness Width Number Recess In. In. In. In. HTN /4 9/ HTN /4 5/ HTN /4 3/ HTN /4 1/ Nominal Screw Size /4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 Hi-Torque Recess TW-6 6 1/4-28 5/ /4 32 TW-7 7 5/ / /4 32 3/4 Hex Power rive Part Recess Screw Size Screw Size Overall Length Number Size Tension Head Shear Head In. mm TW / TW Hi-Torque Rudy Vaughn, Licensor Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 23

32 Solutions oes pex offer magnetic bit holders? it holders, like this pex M-490, let you use a variety of insert bits in power tool applications. You get economy and flexibility and fasteners can be magnetically held to the bit. (See page 48) o pex quick-release bit holders hold bits securely? quick-release bit holder allows fast, easy insert bit changes while assuring that bits stay securely in the bit holder. Simply pull back on the knurled sleeve to release the bit. (See pages 48) If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a non-catalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website oes pex offer quick release chucks? pex has a complete line of quick release chucks that provide fast and easy power bit changes. (See page 49) 24

33 it Holders 1/4 Hex rive for 1/4 Hex Inserts Part Overall Length Number In. mm Non-magnetic / M Magnetic M-490-NR 2 31/32 75 Magnetic; No lock ring M /32 75 Magnetic M /32 79 Magnetic; 3/8 (9.5mm) reduced dia. M Magnetic M Magnetic M Magnetic M Magnetic M Magnetic M /4 83 Magnetic; for Flip-Tip reversible bits M /8 73 Magnetic; 3/8 (9.5mm) turned shank M Magnetic; 3/8 (9.5mm) turned shank RM /8 73 Magnetic; nose piece only, #490-RN RM Magnetic; nose piece only, #490-RN RM Magnetic; nose piece only, #490-RN 5/16 Hex rive Part Overall Length Number In. mm /16 46 For 1/4 hex inserts M For 1/4 hex inserts; magnetic /2 64 For 5/16 hex inserts M /32 79 For 5/16 hex inserts; magnetic 5/16 uckeye-esoutter for 1/4 Hex Inserts Part Overall Length Number In. mm M /16 81 Magnetic 7/16 Hex rive Part Overall Length Number In. mm /4 70 For 1/4 hex inserts M /16 78 For 1/4 hex inserts; magnetic /4 70 For 5/16 hex inserts M /16 84 For 5/16 hex inserts; magnetic M For 5/16 hex inserts; magnetic 9/ Yankee Type for 1/4 Hex Inserts Part Overall Length Number In. mm /4 57 M /8 86 Magnetic M OR 2 51 Magnetic; with O-Ring retainer M-490-OR 3 76 Magnetic; with O-Ring retainer 1/4 Hex rive for 1/4 Hex Inserts, Quick Release Part Overall Length Number In. mm QR-M Magnetic; quick release QR-M /32 74 Magnetic; quick release QR-M Magnetic; quick release QR-M M 7 7/8 200 Magnetic; quick release 1/4 Hex rive for 5/16 Hex Inserts Part Overall Length Number In. mm /8 60 M /16 78 Magnetic 5/ Yankee Type for 1/4 Hex Inserts Part Overall Length Number In. mm /4 57 M /8 86 Magnetic 7/ Yankee Type for 1/4 Hex Inserts Part Overall Length Number In. mm M /8 86 Magnetic 1/4-24 Screw Shank for 1/4 Hex Inserts Part Overall Length Number In. mm 400-H 1 1/8 29 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 25

34 it Holders 1/4 Female Square rive Part Overall Length Number In. mm For 1/4 hex inserts M /32 58 For 1/4 hex inserts; magnetic /32 18 For 1/4 square inserts 3/8 Female Square rive Part Overall Length Number In. mm /2 38 For 1/4 hex inserts M /32 69 For 1/4 hex inserts; magnetic /2 38 For 5/16 hex inserts M /4 70 For 5/16 hex inserts; magnetic /2 38 For 5/16 square inserts 1/2 Female Square rive Part Overall Length Number In. mm /4 45 For 1/4 hex inserts M /4 70 For 1/4 hex inserts; magnetic /4 45 For 5/16 hex inserts M /4 70 For 5/16 hex inserts; magnetic /4 45 For 5/16 square inserts it Holders/ dapters with Set Screw or Thru Hole Hex Square Overall ody Opening Set Screw Opening rive Length () iameter () epth (E) Lock () In. () In. In. mm In. mm In. mm E Female Threaded rive, Quick Releasing hucks Hex Overall Overall Opening Part Female Opening Length iameter epth Number Thread In. In. mm In. mm In. mm QR-08 3/8-24 1/4 1 3/4 45 3/ /64 24 QR-14 3/8-24 7/ / /16 27 QRF-08 1/2-20 1/4 1 3/4 45 3/ /64 24 QRF-14 1/2-20 7/ / /16 27 QRF-20 1/2-20 5/8 2 5/ / /2 38 Female Square rive, Quick Releasing hucks Hex Square Overall ody Sleeve Opening Open. rive Length iameter iameter epth Part () () () () (E) (F) Number In. In. In. mm In. mm In. mm In. mm QR-108 1/4 1/4 1 1/2 38 3/4 19 3/ /64 24 QR-308 1/4 3/8 1 3/4 45 3/4 19 3/ /64 24 QR-508 1/4 1/2 2 1/8 54 7/8 22 3/ /64 24 QR-314 7/16 3/ / /32 28 QR-514 7/16 1/2 2 1/ / /16 27 QR-614 7/16 5/8 2 1/ / / /16 27 QR-714 7/16 3/4 2 3/ / / /16 27 QR-520 5/8 1/2 2 5/ / / /2 38 QR-620 5/8 5/8 2 5/ / / /2 38 QR-720 5/8 3/4 3 1/ / / /2 38 QR-820 5/ / / / /2 38 QR-824 3/ / / /8 41 F E E S-108 1/4 1/4 1 1/4 32 3/4 19 5/8 16 S-308 1/4 3/8 1 1/2 38 3/4 19 5/8 16 S-508 1/4 1/2 1 1/2 38 7/8 22 5/8 16 S-114 7/16 1/ / /32 13 S-314 7/16 3/8 1 3/8 35 3/ /32 13 S-514 7/16 1/2 1 5/ / /32 13 S-614 7/16 5/8 1 3/ / /32 13 S-520 5/8 1/2 1 1/ / /16 17 S-620 5/8 5/8 1 1/ / /16 17 S-720 5/8 3/4 1 11/ / /16 17 S-820 5/ / / /16 17 S-724 3/4 3/ /8 42 7/8 22 S-728 7/8 3/ / /64 23 S-828 7/ / /8 54 5/8 23 Note: Use S bit holders with socket head inserts (page 19) and pipe plug inserts (page 21). an be used with power bits. 26 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

35 1/4 Hex rive Nutsetters for Sheet Metal Screws 6 Point Power rive, SE Socket Part Overall Nose Number Size Length iameter 6 Point In. In. In /4 2 9/16 7/16 Non-magnetic -10 5/16 2 9/16 1/2 Non-magnetic -12 3/8 2 9/16 9/16 Non-magnetic M-08 1/4 1 3/4 7/16 Magnetic MT-08 1/4 1 3/4 3/8 Magnetic M-10 5/16 1 3/4 1/2 Magnetic M-12 3/8 1 3/4 9/16 Magnetic M-14 7/ /16 Magnetic M-08 1/4 2 9/16 7/16 Magnetic 5/16 Shank iameter M-10 5/16 2 9/16 1/2 Magnetic 5/16 Shank iameter M-12 3/8 2 9/16 9/16 Magnetic 5/16 Shank iameter M-14 7/16 2 9/16 5/8 Magnetic 5/16 Shank iameter M-08 1/4 2 9/16 7/16 Magnetic 3/8 Shank iameter M-10 5/16 2 9/16 1/2 Magnetic 3/8 Shank iameter M-12 3/8 2 9/16 9/16 Magnetic 3/8 Shank iameter 6 Point Insert, SE Socket Part Overall Nose Number Size Length iameter 6 Point In. In. In. MHM /16 1 1/8 1/2 Magnetic MHM /8 1 3/4 9/16 Magnetic 6 Point Power rive, Metric Socket Part Overall Nose Number Size Length iameter 6 Point In. In. In. M-6mm Magnetic M-7mm Magnetic M-8mm Magnetic M-10mm Magnetic M-10mm-80m Magnetic 1/4 Hex rive Nutsetters 6 Point and 6 Point Magnetic, SE Part Part Overall Socket Nose Number Number Size Length iameter 6 Point Magnetic In. In. In. 6N M6N /16 2 5/16 6N M6N /16 3 5/16 - M6N /16 5 5/16 - M6N /16 6 5/16 6N M6N /4 2 7/16 6N M6N /4 3 7/16 6N M6N /4 4 7/16 6N M6N /4 5 7/16 6N M6N /4 6 7/16 6N M6N /16 2 1/2 6N M6N /16 3 1/2 6N M6N /16 4 1/2 6N M6N /16 5 1/2 6N M6N /16 6 1/2 6N M6N /32 2 9/16 6N M6N /32 3 9/16 6N M6N /8 2 9/16 6N M6N /8 3 9/16 6N M6N /8 4 9/16 6N M6N /8 6 9/16 6N M6N / /32 6N M6N / /32 6N M6N / /32 6N M6N / /32 6N M6N /2 2 3/4 6N M6N /2 3 3/4 6N M6N / /16 6 Point and 6 Point Magnetic, Metric Part Part Overall Socket Nose Number Number Size Length iameter 6 Point Magnetic mm mm mm 6N-08-8M-3 M6N-08-8M N-08-8M-4 M6N-08-8M N-08-8M-6 M6N-08-8M N-08-10M-3 M6N-08-10M N-08-10M-4 M6N-08-10M N-08-10M-6 M6N-08-10M N-08-12M-3 M6N-08-12M N-08-12M-4 M6N-08-12M N-08-12M-6 M6N-08-12M Point Insert, Metric Socket Part Overall Nose Number Size Length iameter 6 Point In. In. In. MHM-7mm Magnetic MHM-8mm Magnetic MHM-10mm Magnetic Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 27

36 1/4 Hex rive Nutsetters 6 Point, olt learance Part Overall Socket Nose epth of Number Size Length iameter learance () 6 Point In. In. In. In /4 3 1/4 7/16 1 3/ /32 3 1/4 1/2 1 3/ /16 3 1/4 1/2 1 3/ /32 3 1/4 9/16 1 3/ /8 3 1/4 9/16 1 3/ /16 3 1/4 21/32 1 3/ /2 3 1/4 3/4 1 3/ /16 3 1/4 13/16 1 3/ /8 3 1/4 7/8 1 3/8 See bolt clearance Tool Tip page 32. 7/16 Hex rive Nutsetters 6 Point Part Overall Socket Nose Number Size Length iameter 6 Point In. In. In. 6N /16 3 9/16 6N /8 3 9/16 6N /16 3 3/4 6N /2 3 13/16 6N /2 4 13/16 6N /16 3 7/8 6N /16 6 7/8 6N / N / /8 6N / /8 5/8 Hex rive Nutsetters 6 Point Part Overall Socket Nose Number Size Length iameter 6 Point In. In. In. 6N / /8 6N / /8 Hand rivers rivers with Self-ontained Insert its Overall lade Part Female Length Projection No. Hex Size In. mm In. mm M-15-S 1/4 8 1/ /8 111 Phillips #1, #2, #3; Slotted 4F-5R, 10F-12R; hollow handle. M-15-S- 1/4 8 1/ /8 111 Without bits; hollow handle. Replaceable it rivers Overall lade Part Female Length Projection No. Hex Size In. mm In. mm 1510-P 1/4 2 3/4 70 7/ P 1/4 7 1/ /32 83 Replaceable it rivers Magnetic Overall lade Part Female Length Projection No. Hex Size In. mm In. mm M-1505-P 1/4 2 3/8 60 3/8 10 M-1500-P 1/4 8 1/ / it Kit wls Industrial it Kit Tool kit includes plastic carrying case with: Magnetic hand driver and magnetic bit holder. Phillips bits: #1,#2, #3 Slotted bits: 3F-4R, 4F-5R, 6F-8R, 8F-10R, 10F-12R Torx bits: T-10. T-15, T-20, T-25, T-27, T-30, T-40 Square Recess bits: 3/32, 1/8 Hex bits: 5/64, 3/32, 7/64, 1/8, 9/64 Pozidriv bits: #1, #2 Part Overall Length Shank iameter Number In. mm In. mm W / W-95-L W-95-LL 8 7/ Use awls to line up holes and scratch mark surfaces. Pozidriv is a registered trademark of the Phillips Screw o. Torx is a registered trademark of the amcar ivision of Textron. 28 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

37 Hex Extensions Male Hex rive with 1/4 Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX-250 1/4 Pin 1 3/8 35 EX-250-1/4 all 1 3/8 35 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX-262 5/16 Pin 1 1/2 38 EX /16 Pin EX /16 all EX /16 Pin EX-251 7/16 Pin 1 3/8 35 EX-251-7/16 all 1 3/8 35 EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 Pin EX /16 Pin EX /16 Pin Male Hex rive with 3/8 Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX-370 1/4 Pin 1 5/8 41 EX-370-1/4 all 1 5/8 41 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX-380 5/16 Pin 1 1/2 38 EX-380-5/16 all 1 1/2 38 EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 Pin EX /16 Pin EX-371 7/16 Pin 1 3/4 45 EX /16 Pin 2 51 EX /4 7/16 Pin 2 3/4 70 EX /16 Pin 3 76 EX /16 all 3 76 EX /16 Pin EX /16 Pin EX /16 Pin EX /16 Pin EX /16 Pin EX /16 Pin EX /16 Pin Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 29

38 Hex Extensions Male Hex rive with 1/2 Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 all 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /16 Pin 2 51 EX /16 all 2 51 EX /16 Pin 3 76 EX /16 all EX /16 Pin 2 1/8 54 EX /16 all 2 1/8 54 EX /16 Pin 3 76 EX /16 all 3 76 EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX /16 all EX /16 Pin EX-502 5/8 Pin 2 51 EX-502-5/8 all 2 51 EX /8 Pin 3 76 EX /8 all 3 76 EX /8 all EX /8 Pin EX /8 Pin EX /8 Pin Male Hex rive with 3/4 Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /16 7/32 rill Hole 3 76 EX /16 all 3 76 EX /8 7/32 rill Hole EX /8 all EX /8 7/32 rill Hole EX /8 7/32 rill Hole Extensions Threaded Screw Shank Male Male Part Square Thread Overall Length ody iameter Number In. In. In. mm In. mm TH-256 1/4 1/ /8 41 7/16 11 TH-376 3/8 1/ /8 41 1/2 13 TH-250 1/4 1/ /8 41 7/16 11 TH-370 3/8 1/ /4 45 1/2 13 TH-372 3/8 1/ /4 45 1/2 13 Male Hex rive with 5/8 Male Square Part Hex rive Type of Overall Length Number In. Lock In. mm EX /16 Pin 3 76 EX /16 Pin EX /8 Pin 3 76 EX /8 all 3 76 EX /8 Pin EX /8 Pin Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

39 1/4 Male Hex Universal Wrenches 7/16 Male Hex Universal Wrenches SE 6 Point, Standard & Tension Type Extension E SE 6 Point, Standard & Tension Type Extension E Standard Type Tension Type Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K /4 3 3/4 5/8 3/8 3/8 K /4 4 3/4 5/8 3/8 3/8 K-25-6 KS /4 6 3/4 5/8 3/8 3/8 K /4 9 3/4 5/8 3/8 3/8 K /4 12 3/4 5/8 3/8 3/8 K /16 3 3/4 5/8 7/16 3/8 K-26-6 KS /16 6 3/4 5/8 7/16 3/8 K /16 9 3/4 5/8 7/16 3/8 K KS / /4 5/8 7/16 3/8 - KS /16 6 3/4 3/4 7/16 5/16 K /32 3 3/4 5/8 1/2 3/8 K /32 6 3/4 5/8 1/2 3/8 K /32 6 3/4 3/4 15/32 5/16 K /8 3 13/16 5/8 9/16 7/16 K-28-6 KS /8 6 13/16 5/8 9/16 7/16 - KS / /16 5/8 9/16 7/16 - KS /8 6 13/16 3/4 9/16 3/8 K /16 3 7/8 5/8 5/8 1/2 K-29-6 KS /16 6 7/8 5/8 5/8 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K-30-6 KS /2 6 7/8 11/16 11/16 1/2 K /2 9 7/8 11/16 11/16 1/2 - KS / /4 3/4 9/16 K KS / /16 13/16 9/16 - KS / /16 13/16 9/16 Metric 6 Point, Standard & Tension Type Extension Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-5-7m K-5-7m-6 KS-5-7m KS-5-7m K-6-8m K-6-8m K-6-8m-6 KS-6-8m KS-6-8m K-6-9m K-6-10m K-6-10m K-6-10m-6 KS-6-10m K-6-10m-9 KS-6-10m K-6-10m K-7-11m-6 KS-7-11m K-7-12m K-7-12m K-7-12m K-7-13m K-7-13m-6 KS-7-13m K-7-13m-9 KS-7-13m ctual design of universal wrenches may not be exactly like pictures above. Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Standard Type Tension Type Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. K /8 6 13/16 5/8 7/32 7/16 - KT /16 6 7/8 5/8 5/8 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K KT / /4 3/4 9/16 K KT / /8 11/16 15/32 - KT / /8 11/16 15/32 K KT / /8 11/16 15/32 K KT / /16 7/16 K / /16 13/16 9/16 - KT / /16 13/16 9/16 - KT / /16 13/16 9/16 - KT / /16 13/16 9/16 - KT / /16 7/8 3/4 17/32 K KT / /16 7/8 3/4 17/32 K KT / /16 7/8 3/4 17/32 - KT / /8 1 3/4 9/16 K / /8 1 3/4 9/16 K KT / /8 7/8 7/8 19/32 K KT / /8 7/8 7/8 19/32 K KT / / /32 5/8 - KT / / /32 5/8 - KT / / /32 5/8 K / / /16 K / /4 1 1/8 1 1/8 11/16 K KT / /4 1 1/8 1 1/8 11/16 - KT / /4 1 1/8 1 1/8 11/16 Metric 6 Point, Standard & Tension Type Extension Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-6-10m-6 KT-6-10m KT-6-10m KT-6-10m K-7-11m K-7-13m K-7-13m-6 KT-7-13m K-7-13m-9 KT-7-13m K-7-13m K-7-14m-6 KT-7-14m KT-7-14m KT-7-15m K-8-15m-6 KT-8-15m K-8-15m-9 KT-8-15m K-8-15m-12 KT-8-15m K-8-16m-6 KT-8-16m K-8-16m-9 KT-8-16m KT-8-16m KT-8-17m K-8-17m-12 KT-8-13m K-8-18m-6 KT-8-18m KT-8-18m KT-8-18m K-10-19m-6 KT-10-19m ctual design of universal wrenches may not be exactly like pictures above. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 31

40 Solutions When can I use a universal adapter? universal adapter gives all of your sockets the versatility of a universal wrench. Universal adapters must not be used with impact drivers. (See page 39.) oes pex offer bolt clearance nutsetters? olt clearance nutsetters allow the bolt or stud to recess into the nutsetter body as the nut is driven down. olt clearance nutsetters are prefixed with the numbers 6-. (See page 28.) oes pex offer Torx sockets? Like Torx screws, Torx bolts are becoming commonplace in a variety of assembly applications. pex offers a wide variety of Torx sockets. (See page 39.) What is the advantage of surface drive sockets? Use surface drive sockets if tools are still running when they engage the fasteners (such as on this multispindle machine). They re easier to engage and will result in less tool wear. oes pex offer universal wrenches with longer sockets? Universal wrenches are available with a longer socket to allow a stud to recess into the socket opening. (heck with your pex representative for details.) If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website 32

41 What is the benefit of a tension sleeve? universal wrench with a tension sleeve holds the socket at the desired driving angle while aligning the tool and fastener. Other universal wrench sockets can flop making engagement difficult. Tension Type Standard Type What types of magnetic sockets does pex offer? In addition to a fixed magnet socket (center), pex offers spring-loaded (left) and cylindrical (right) magnet styles that allow the bolt to recess into the socket body as the nut is driven down. Fixed magnet sockets are designated by a M- part number prefix, spring-loaded by M- prefix and cylindrical by a SM- prefix. oes pex offer thin wall sockets? Thin wall sockets accommodate countersunk or limited clearance nut or bolt locations. Many of these sockets have a shouldered body design that can fit in tight quarters. oes pex offer a complete line of extensions? pex features a wide selection of extension lengths, styles and sizes. (See the Table of ontents for a complete listing.) oes pex offer mar resistant bits and sockets? pex can nylon coat just about any of our bits or sockets. Nylon offers excellent mar resistance for assemblies that have painted, varnished or chromed surfaces. Nylon also offers some safety benefits by covering tool junctions. (See pages for more information) an I use my extensions, adapters and universals with impact drivers? Quality design and construction give pex universal wrenches a long service life and durability. Remember, universal wrenches, extensions and adapters are not to be used with impact drivers. 33

42 In this section... Impact Sockets pex industrial grade impact sockets are available in a wide range of lengths and wall thicknesses, and with single or double hex openings. Square openings are available in select sizes. Fixed Magnetic Impact Sockets Magnetic sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. These sockets are identified with a M- prefix. Magnetic olt learance Impact Sockets s the nut is run down, a spring-loaded or hollow cylinder magnet allows the bolt or stud to retract into the socket body. Nuts are held firmly in the socket. These sockets are identified with a M- prefix. Surface rive Sockets Large openings on the six corners of the opening create a floating action that allows the socket to slip quickly and easily onto the nut or bolt. Ideal for compensating for imperfect alignment between the tool and fastener. Not generally recommended for impact use. These sockets are identified with a SF- prefix. Fast Lead Impact Sockets esigned for power tool and multiple spindle power tools, a specially tapered opening provides complete engagement with the nut almost instantly upon engagement. This speeds productivity and extends tool life. Engagement is possible without starting and stopping the tool for each nut. These sockets are identified with a FL- prefix. Special Sockets You ll find Spline, Torx, tap holding, udd Wheel, grease fitting and other sockets for special applications. Extensions and dapters pex provides the accessories needed to adapt sockets to nearly every tool and application. Square rive Universal Wrenches Hard-to-reach areas are no problem with pex s wide range of universal and extension universal wrenches. 34

43 1/4 Square rive Sockets, SE Standard Length, 6 Point and ouble Hex Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /32 7/8 1/4 1/2 3/ /16 7/8 5/16 1/2 3/ /32 7/8 3/8 1/2 5/ /4 7/8 3/8 1/2 5/32 X-1108* - 1/4 7/8 3/8 1/2 5/ /32 1 7/16 1/2 3/ /16 1 1/2 1/2 3/16 X-1110* - 5/16 1 1/2 1/2 3/16 H-510-5/16 7/8 7/16 7/16 3/ /32 1 1/2 1/2 3/ /8 1 9/16 9/16 1/ /32 1 5/8 5/8 1/ /16 1 5/8 5/8 9/ /2 1 11/16 11/16 11/ / /16 13/16 7/ /8 1 7/8 7/8 7/16 * Parts have a harder heat treat. Long Length, 6 Point and ouble Hex Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /16 1 3/4 5/16 1/2 3/ /32 1 3/4 3/8 1/2 5/ /4 1 3/4 3/8 1/2 5/ /32 1 3/4 7/16 1/2 3/ /16 1 3/4 1/2 1/2 3/ /32 1 3/4 1/2 1/2 3/ /8 1 3/4 9/16 9/16 1/ /32 1 3/4 5/8 5/8 1/ /16 1 3/4 5/8 5/8 9/ /2 1 3/4 11/16 11/16 11/ /16 1 3/4 13/16 13/16 7/16 Magnetic, Standard Length, 6 Point Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () M /32 7/8 5/16 1/2 3/32 M /16 7/8 5/16 1/2 3/32 M /32 7/8 3/8 1/2 5/32 MX-1108* 1/4 7/8 3/8 1/2 5/32 M-1108-E* 1/4 7/8 3/8 1/2 5/32 MX-1109* 9/32 1 7/16 1/2 3/16 MH-510 5/16 7/8 7/16 7/16 1/8 M /16 1 1/2 1/2 3/16 MX-1110* 5/16 1 1/2 1/2 3/16 MX /32 1 1/2 1/2 3/16 M /8 1 9/16 9/16 1/4 MX-1112* 3/8 1 9/16 9/16 1/4 M /16 1 5/8 5/8 9/32 M /2 1 11/16 11/16 11/32 M / /16 11/16 11/32 *Parts have a harder heat treat; MX-1108-E has no lead-in chamfer. Magnetic, Long & Extra Long Length, 6 Point Part No. Part No. Hex Overall iameter iameter Opening Fixed olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /16 1 3/4 5/16 1/2 5/32 M-1208 M /4 1 3/4 3/8 1/2 5/32 - M /4 3 3/8 1/2 5/32 M-1209 M /32 1 3/4 7/16 1/2 3/16 M-1210 M /16 1 3/4 1/2 1/2 3/16 - M /32 1 3/4 1/2 1/2 3/16 - M /32 3 1/2 1/2 3/16 M-1212 M /8 1 3/4 9/16 9/16 1/4 - M /8 3 9/16 9/16 1/4 M-1214 M /16 1 3/4 5/8 5/8 9/32 - M /16 3 5/8 5/8 9/32 - M /2 1 3/4 11/16 11/16 11/32 - M /16 1 3/4 13/16 13/16 7/16 * For explanation of magnets, see Tool Tip on page 33. Extra Long Length, 6 Point and ouble Hex Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /4 3 3/8 1/2 5/ /16 3 1/2 1/2 3/ /32 3 1/2 1/2 3/ /8 3 9/16 9/16 1/ /32 3 9/16 9/16 1/ /16 3 5/8 5/8 9/ /2 3 11/16 11/16 11/ / /16 13/16 7/ /8 3 7/8 7/8 7/16 Surface rive & Fast Lead, Standard & Long Length Part No. Part No. Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () - FL /4 7/8 3/8 1/2 5/32 - FL /32 7/8 3/8 1/2 5/32 - FL /16 1 1/2 1/2 3/16 SF-1112 FL /8 1 9/16 9/16 1/4 - FL /8 1 3/4 9/16 9/16 1/4 - FL /16 1 5/8 5/8 9/32 - FL /16 1 3/4 5/8 5/8 9/32 SF-1116 FL /2 1 11/16 11/16 11/32 - FL /2 1 3/4 11/16 11/16 11/32 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 35

44 1/4 Sq. r. Sockets For SE Sheet Metal Screws 6 Point & 6 Point Magnetic, For Predrilled Holes* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () - M1E06 3/16 7/8 5/16 1/2 3/32 - M1E07 7/32 7/8 3/8 1/2 5/32 1E08 M1E08 1/4 7/8 3/8 1/2 5/32 1E10 M1E10 5/16 7/8 1/2 1/2 3/16 - M1E11 11/32 1 1/2 1/2 3/16 - M1E12 3/8 1 5/8 5/8 1/4 - M1E14 7/ /16 11/16 9/32 - M1E16 1/2 1 11/16 11/16 11/32 *Sockets for predrilled holes are intermediate hardness; sockets for self-drilling and tapping screws are maximum hardness. 6 Point & 6 Point Magnetic, for Self-rilling and Tapping Screws* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 1P06 M1P06 3/16 7/8 5/16 1/2 3/32 1P07 M1P07 7/32 7/8 3/8 1/2 5/32 1P08 M1P08 1/4 7/8 7/16 1/2 5/32 - M1P09 9/32 7/8 1/2 1/2 3/16 1P10 M1P10 5/16 7/8 1/2 1/2 3/16 1P11 M1P11 11/32 1 1/2 1/2 3/16 1P12 M1P12 3/8 1 5/8 5/8 1/4 1P14 M1P14 7/ /16 11/16 9/32 1P16 M1P16 1/2 1 11/16 11/16 11/32 *Sockets for predrilled holes are intermediate hardness; sockets for self-drilling and tapping screws are maximum hardness. 1/4 Sq. r. Sockets For SE Square Nuts Single Square & ouble Square 1/4 Square rive Universal Wrenches, SE Part Part No. Hex Overall iameter iameter Opening Number ouble Opening Length Nose End rive End epth Square Square In. () () () () /4 1 1/2 1/2 3/ /8 1 3/4 3/4 1/4 6 Point and ouble Hex Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point ouble Hex In. () () () () (E) S-25 S-25-1/4 1 7/32 3/4 5/8 3/8 3/8 S-26 S-26-5/ /32 3/4 5/8 7/16 3/8 S-28 S-28-3/8 1 19/32 13/16 5/8 17/32 7/16 S-29 S-29-7/ /32 7/8 5/8 5/8 1/2 S-30 S-30-1/2 1 21/32 7/8 11/16 11/16 1/2 S-65-9/ /32 7/8 11/16 11/16 1/2 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E 36 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

45 1/4 Square rive Sockets, Metric Standard Length, 6 Point and ouble Hex mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 3.5mm mm mm mm mm mm11 6mm mm11 7mm mm11 8mm mm11 9mm mm11 10mm OS-10mm mm11 11mm mm11 12mm mm11 13mm mm11 14mm mm mm Long Length, 6 Point and ouble Hex mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 5mm mm mm mm mm21 8mm mm21 9mm mm21 10mm mm mm mm21 13mm mm mm21 15mm mm Magnetic, Standard Length, 6 Point Magnetic, Long Length, 6 Point mm Part No. Part No. Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance mm () () () () - M-5mm M-5.5mm M-6mm21 M-6mm M-7mm21 M-7mm M-8mm21 M-8mm M-9mm21 M-9mm M-10mm21 M-10mm **OSM-10mm M-11mm21 M-11mm M-12mm21 M-12mm M-13mm21 M-13mm M-14mm M-15mm M-16mm * For an explanation of magnets, see Tool Tip on page 33. ** No ring groove. mm Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-5mm M-5.5mm M-6mm M-7mm M-8mm M-9mm M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm Surface rive, Standard and Long Length mm Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-8mm SF-10mm SF-10mm SF-12mm SF-13mm SF-13mm SF-15mm Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 37

46 1/4 Sq. r. Sockets For Metric Sheet Metal Screws 6 Point and 6 Point Magnetic Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm () () () () 3.5mmE mmE1 M-4mmE M-5mmE mmE1 M-5.5mmE mmE1 M-6mmE mmE1 M-7mmE MR-7mmE1* mmE1 M-8mmE mmE1 M-9mmE mmE1 M-10mmE mmE1 M-11mmE mmE1 M-12mmE mmE1 M-13mmE *MR-7mmE1 has stronger magnet mm 1/4 Sq. r. Sockets For Spline Fasteners Standard and Long Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS / /64 8 7/16 11 MS /4 7/8 22 3/8 10 7/16 11 MS / /8 10 7/16 11 MS /32 7/8 22 7/ /16 11 MS / / /16 11 MS /16 7/ / /64 12 MS / / /64 12 MS /8 7/ / /32 14 MS / / /64 16 pex spline sockets conform to military specifications MS and MIL-W /4 Sq. r. Universal Wrenches, Metric 6 Point Part Hex Overall Socket Socket Nose End Opening Number Opening Length Length iameter iameter epth 6 Point mm () () () () (E) S-15-6M S-15-7M S-16-8M S-16-10M Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website 38 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

47 1/4 Sq. r. Torx Sockets For External Torx Screws Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1104 E / / TX-1105 E / / TX-1106 E / / TX-1108 E / / TX-1110 E / / TX-1112 E / / For External Torx Screws, Thin Wall Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1404 E / / TX-1405 E / / TX-1406 E / / TX-1407 E / / TX-1408 E / / TX-1410 E / / TX-1411 E / / TX-1412 E / / /4 Sq. r. Extensions 7/8 to 14 (22mm to 356mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-252 1/4 Pin 7/8 22 EX-252-1/4 all 1 25 EX /4 Pin 2 51 EX /4 all 2 51 EX /4 Pin 3 76 EX /4 Pin EX /4 all EX /4 Pin EX /4 all EX /4 Pin EX /4 Pin EX /4 Pin EX /4 Pin /4 Sq. r. dapters 1/4 to 3/8 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-372 3/8 1/4 Pin 1 25 EX-372-3/8 1/4 all 1 25 For Torx Nuts Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-1E05 E-5 7/ / / TX-1E06 E-6 7/ / / TX-1E08 E-8 7/ / / Sockets for Torx nuts have a larger lead-in chamfer than sockets for external Torx screws. Most Torx sockets have a IN (pin and o-ring) groove. 1/4 Sq. r. Universal dapters Male Square to Female Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-25 1/4 1/4 Pin 1 5/8 41 5/8 16 MF-25-1/4 1/4 all 1 5/8 41 5/8 16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 39

48 3/8 Square rive Sockets, SE 6 Point & ouble Hex, Short and Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /4 1 1/4 7/16 3/4 5/ /32 1 1/4 7/16 3/4 3/ /16 7/8 1/2 3/4 3/ /16 1 1/4 1/2 3/4 3/ /32 1 1/4 1/2 3/4 3/ /8 7/8 19/32 3/4 3/ /8 1 1/4 19/32 3/4 1/ /32 1 1/2 11/16 3/4 1/ /16 7/8 11/16 3/4 9/ /16 1 1/2 11/16 3/4 9/32 SW-604-7/16 1 1/2 21/32 3/4 9/ /2 7/8 13/16 13/16 5/ /2 1 1/2 13/16 13/16 11/32 H /2 1 1/2 11/16 11/16 11/ /32 1 1/2 13/16 13/16 11/ /16 7/8 7/8 7/8 5/ /16 1 1/2 7/8 7/8 7/16 SW-343-9/16 1 1/2 3/4 3/4 7/16 SW-605 SW-605-9/16 1 1/2 3/4 13/16 7/ /32 1 1/2 7/8 7/8 7/ /8 1 15/16 15/16 7/ /8 1 1/2 15/16 15/16 7/16 H-3520* - 5/8 2 3/8 7/8 7/8 7/ / / /16 1 1/ / / /16 1 1/16 7/ /4 1 1/2 1 1/16 1 1/16 15/ /16 1 1/2 1 1/8 1 1/8 7/ / /4 1 1/4 7/16 *H-3520 is spark plug socket. 6 Point & ouble Hex, Thin Wall, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /4 1 1/4 7/16 3/4 5/ /32 1 1/4 7/16 3/4 3/ /16 1 1/4 1/2 3/4 3/16 OS-3410* - 5/16 1 1/4 7/16 19/32 3/ /8 1 1/2 19/32 3/4 1/ /16 1 1/2 5/8 3/4 9/ /2 1 1/2 3/4 3/4 11/ /16 1 1/2 25/32 13/16 7/ /8 1 1/2 7/8 7/8 7/ /4 1 1/ / /16 1 1/2 1 1/8 1 1/8 17/ /8 1 1/2 1 3/16 1 1/4 9/ /16 1 1/2 1 5/16 1 5/16 5/ /2 1 3/8 1 3/8 5/ /16 1 1/2 1 1/2 1 1/2 11/16 *No ring groove. 6 Point & ouble Hex, Long and Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () 40 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items /4 2 7/16 3/4 5/ /4 3 1/2 7/16 3/4 5/ /32 2 7/16 3/4 3/ /16 2 1/2 3/4 3/ /16 3 1/2 1/2 3/4 3/16 OS-3310-* - 5/16 3 1/2 15/32 5/8 3/ /32 2 1/2 3/4 3/ /32 3 1/2 1/2 3/4 3/ /8 2 19/32 3/4 1/ /8 3 1/2 19/32 3/4 1/ / /16 3/4 9/ /16 3 1/2 11/16 3/4 9/ /2 2 13/16 13/16 11/ /2 3 1/2 13/16 13/16 11/ /16 2 7/8 7/8 7/ /16 3 1/2 7/8 7/8 7/ /8 2 15/16 15/16 7/ /8 3 1/2 15/16 15/16 7/ / / /16 3 1/ / / /16 1 1/16 15/ /4 3 1/2 1 1/16 1 1/16 15/ / /4 1 1/4 17/ /16 3 1/2 1 1/4 1 1/4 17/ / /4 1 1/4 9/ /8 3 1/2 1 1/4 1 1/4 9/16 *No ring groove. 6 Point & ouble Hex, Thin Wall, Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /16 2 1/2 3/4 3/ /32 2 1/2 3/4 3/ /8 2 19/32 3/4 1/ /16 2 5/8 3/4 9/ /2 2 3/4 3/4 11/ / /32 13/16 7/ / / / /16 1 5/16 5/ /8 1 3/8 5/ / /2 1 1/2 11/16

49 3/8 Square rive Sockets, SE Magnetic, Short and Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /4 1 1/4 7/16 3/4 5/32 M /32 1 1/4 7/16 3/4 3/16 M /16 1 1/4 1/2 3/4 3/16 M /8 7/8 19/32 3/4 3/16 M /8 1 1/4 19/32 3/4 1/4 M /16 7/8 11/16 3/4 9/32 M /16 1 1/2 11/16 3/4 9/32 MSW-604 7/16 1 1/2 21/32 3/4 9/32 M /2 7/8 13/16 13/16 5/16 M /2 1 1/2 13/16 13/16 11/32 MH /2 1 1/2 11/16 11/16 11/32 M /16 7/8 7/8 7/8 5/16 M /16 1 1/2 7/8 7/8 7/16 MSW-343 9/16 1 1/2 3/4 3/4 7/16 M /8 1 1/2 15/16 15/16 7/16 Magnetic, Thin Wall, Standard Length Magnetic, Long Length & Extra Long Length Part No. Part No. Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /16 2 1/2 3/4 3/16 M-3212 M /8 2 19/32 3/4 1/4 M-3214 M / /16 3/4 9/32 - M /16 3 1/2 11/16 3/4 9/32 M-3216 M /2 2 13/16 13/16 11/32 M-3218 M /16 2 7/8 7/8 7/16 - M /16 3 1/2 7/8 7/8 7/16 - M /8 2 15/16 15/16 7/16 Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /4 1 1/4 7/16 3/4 5/32 M /16 1 1/4 1/2 3/4 3/16 OSM-3410* 5/16 1 1/4 7/16 19/32 3/16 M /32 1 1/4 1/2 3/4 3/16 M /8 1 1/2 19/32 3/4 1/4 M /16 1 1/2 5/8 3/4 9/32 OSM-3414* 7/16 1 1/2 5/8 5/8 9/32 M /2 1 1/2 3/4 3/4 11/32 M /16 1 1/2 25/32 13/16 7/16 M /4 1 1/ /32 M /16 1 1/2 1 1/8 1 1/8 17/32 *No ring groove. Magnetic, Thin Wall, Long Length Part No. Part No. Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /8 2 19/32 3/4 1/4 M-3514 M /16 2 5/8 3/4 9/32 - M /2 2 3/4 3/4 11/32 Surface rive & Fast Lead, Short and Standard Length Part No. Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () SF /16 7/8 1/2 3/4 3/16 SF-3110 FL /16 1 1/4 1/2 3/4 3/16 SF-3012 FL /8 7/8 19/32 3/4 3/16 SF-3112 FL /8 1 1/4 19/32 3/4 1/4 SF-3014 FL /16 7/8 11/16 3/4 9/32 SF-3114 FL /16 1 1/2 11/16 3/4 9/32 SF-3016 FL /2 7/8 13/16 13/16 5/16 SF-3116 FL /2 1 1/2 13/16 13/16 11/32 SF-H /2 1 1/2 11/16 11/16 11/32 SF-3018 FL /16 7/8 7/8 7/8 5/16 SF-3118 FL /16 1 1/2 7/8 7/8 7/16 SF-3120 FL /8 1 1/2 15/16 15/16 7/16 - FL / /16 15/16 7/16 - FL /16 1 1/ /16 - FL / /16 1 1/16 7/16 - FL /4 1 1/2 1 1/16 1 1/16 15/32 Surface rive & Fast Lead, Thin Wall, Standard Length Part No. Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () SF-3412 FL /8 1 1/2 19/32 3/4 1/4 SF-3414 FL /16 1 1/2 5/8 3/4 9/32 SF /2 1 1/2 3/4 3/4 11/32 SF /16 1 1/2 25/32 13/16 7/16 SF /2 1 3/8 1 3/8 5/8 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 41

50 3/8 Sq. r. Sockets, SE Surface rive & Fast Lead, Long and Extra Long Length Part No. Part Hex Overall iameter iameter Opening Surface Number Opening Length Nose End rive End epth rive Fast Lead In. () () () () - FL /16 2 1/2 3/4 3/16 SF-3212 FL /8 2 19/32 3/4 1/4 - FL /8 3 1/2 19/32 3/4 1/4 SF-3214 FL / /16 3/4 9/32 SF-3314 FL /16 3 1/2 11/16 3/4 9/32 SF-3216 FL /2 2 13/16 13/16 11/32 SF-3316 FL /2 3 1/2 13/16 13/16 11/32 SF-3218 FL /16 2 7/8 7/8 7/16 SF-3318 FL /16 3 1/2 7/8 7/8 7/16 - FL /8 2 15/16 15/16 7/16 SF-3320 FL /8 3 1/2 15/16 15/16 7/16 SF / /16 1 1/16 15/32 SF-3324 FL /4 3 1/2 1 1/16 1 1/16 15/32 - FL /16 3 1/2 1 1/4 1 1/4 17/32 Surface rive, Thin Wall, Long Length Part No. Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive In. () () () () SF /8 2 19/32 3/4 1/4 OSSF-3512* 3/8 2 19/32 19/32 1/4 SF /16 2 5/8 3/4 9/32 OSSF-3514* 7/16 2 5/8 5/8 9/32 SF /2 2 3/4 3/4 11/32 SF / /32 13/16 7/16 *No ring groove. 3/8 Sq. r. Sockets For SE Sheet Metal Screws 6 Point & 6 Point Magnetic, For Predrilled Holes* Part No. Part No. Hex Overall iameter iameter Opening Fixed olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M3E08 1/4 1 1/4 7/16 3/4 5/32 3E10 M3E10 5/16 1 1/4 1/2 3/4 3/16 3E11-11/32 1 1/4 1/2 3/4 3/16 3E12 M3E12 3/8 1 1/4 19/32 3/4 1/4 3E14 M3E14 7/16 1 1/4 11/16 3/4 9/32 3E16 M3E16 1/2 1 1/2 13/16 13/16 11/32 - M3E18 9/16 1 1/2 7/8 7/8 7/16 3/8 Sq. r. Sockets For SE Sheet Metal Screws 6 Point & 6 Point Magnetic, For Self-Tapping Screws* Part No. Part No. Hex Overall iameter iameter Opening Fixed olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M3P06 3/16 1 1/4 5/16 3/4 3/32 - M3P07 7/32 1 1/4 3/8 3/4 5/32 - M3P08 1/4 1 1/4 7/16 3/4 5/32 3P10 M3P10 5/16 1 1/4 1/2 3/4 3/16 3P12 M3P12 3/8 1 1/4 5/8 3/4 1/4 3P14 M3P14 7/16 1 1/4 11/16 3/4 9/32 3P16 M3P16 1/2 1 1/2 13/16 13/16 11/32 - M3P18 9/16 1 1/2 7/8 7/8 7/16 *Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. 3/8 Sq. r. Sockets For SE Square Nuts Single Square & ouble Square Part No. Part No. Hex Overall iameter iameter Opening Single ouble Opening Length Nose End rive End epth Square Square In. () () () () /32 1 1/2 7/16 3/4 3/ /4 1 1/2 1/2 3/4 3/ /32 1 1/2 9/16 3/4 3/ /16 1 1/2 5/8 3/4 1/ /8 1 1/2 3/4 3/4 1/ /16 1 1/2 7/8 7/8 9/ /2 1 1/ / /16 1 1/ / /8 1 1/2 1 1/8 1 1/8 7/ /4 1 1/2 1 3/8 1 3/8 15/32 3/8 Sq. r. Socket Sets, SE 6 Point PS38 PS38L 8 piece, standard length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 8 piece, long length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 42 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

51 3/8 Sq. r. Universal Wrenches, SE 6 Point & 12 Point Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () In. () In. () In. () In. (E) In. S-120 S-120-5/ /64 3/4 3/4 7/16 5/16 S-122 S-122-3/8 1 57/64 13/16 3/4 9/16 3/8 S-200-3/8 1 15/16 7/8 7/8 9/16 11/32 S-123 S-123-7/16 2 1/64 15/16 3/4 19/32 1/2 S-201-7/ /16 7/8 5/8 13/32 S-124 S-124-1/2 2 5/64 1 3/4 3/4 9/16 S-202 S-202-1/2 2 1/16 1 7/8 11/16 15/32 S-125 S-125-9/16 2 1/8 1 13/16 13/16 9/16 S-203 S-203-9/16 2 1/16 1 1/16 7/8 3/4 17/32 S-302-9/16 2 1/8 1 1/8 1 3/4 9/16 S-205 S-205-5/8 2 1/8 1 1/8 7/8 7/8 19/32 S /16 2 5/16 1 1/ /16 S-306-3/4 2 5/16 1 1/4 1 1/8 1 1/8 11/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Sq. r. Ironand Universal Wrenches, SE 6 Point Part Number 3/8 Sq. r. Universal Wrench Set, SE 6 Point PU37 Hex Opening In. Overall Length () In. Socket Length () In. Socket iameter () In. 7 piece, standard length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Nose End iameter () In. E learance epth (E) In. S / S / S / S / S / S / S / Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E 3/8 Sq. r. Universal Wrenches, SE Extension 6 Point Standard and Tension Type Tension Type 3/8 Sq. r. Socket Head its, SE omplete, dapter Only, Insert Only Standard Type Nose Part Part Hex Overall Socket Socket End learance Number Number Opening Length Length ia. ia. epth Standard Tension In. () In. () In. () In. () In. (E) In. K-43-6 K /8 6 13/16 5/8 17/32 7/16 K /16 3 7/8 5/8 5/8 1/2 K /16 4 7/8 5/8 5/8 1/2 K-44-6 K /16 6 7/8 5/8 5/8 1/2 K K / /16 3/4 19/32 1/2 K /2 3 7/8 11/16 11/16 1/2 K /2 4 7/8 11/16 11/16 1/2 K-45-6 K /2 6 7/8 11/16 11/16 1/2 K /2 9 7/8 11/16 11/16 1/2 K / /4 3/4 9/16 - K / /4 3/4 9/16 K K / /16 13/16 9/16 K / /16 13/16 9/16 K K / /16 13/16 9/16 K / /16 13/16 9/16 K / /8 7/8 7/8 19/32 - K / /8 7/8 7/8 19/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Sq. r. Ironand Univ. Wrenches, SE Extension 6 Point Standard and Tension Type Part Number Standard Standard Type Part Number Tension Tension Type Hex Open. In. O L. () In. Soc. L. () In. Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-10 S-314 SZ-10-1/8 2 1/ /8 35 SZ-11 S-314 SZ-11-5/32 2 1/ /8 35 SZ-12 S-314 SZ-12-3/16 2 1/ /8 35 SZ-13 S-314 SZ-13-7/32 2 1/ /8 35 SZ-14 S-314 SZ-14-1/4 2 1/ /8 35 SZ-15 S-314 SZ-15-5/16 2 1/ /8 35 SZ-16 S-314 SZ-16-3/8 2 1/ /8 35 See page 35 for more 3/8 drive complete socket head bits. Soc. ia. () In. Nose ia. () In. E E lear. epth (E) In. KW KW / KW KW / KW KW / KW / KW / KW KW / Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 43

52 3/8 Square rive Sockets, Metric 6 Point & 12 Point, Short and Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 6mm mm mm mm mm13 8mm OS-8mm13* mm13 9mm mm03 10mm OS-10mm03* mm13 10mm mm03 11mm mm13 11mm mm03 12mm mm13 12mm mm03 13mm mm13 13mm mm03 14mm mm13 14mm mm03 15mm mm13 15mm mm03 16mm mm13 16mm mm mm13 17mm mm mm13 18mm mm03 19mm mm13 19mm mm mm mm mm mm *No ring groove. 6 Point & ouble Hex, Thin Wall, Standard Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 6mm mm43 7mm mm43 8mm mm43 9mm mm43 10mm mm mm43 12mm mm43 13mm mm43 14mm mm43 15mm mm43 16mm mm43 17mm mm mm43 19mm mm 6 Point & ouble Hex, Long and Extra Long Length 44 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point 12 Point mm () () () () 7mm mm23 8mm mm23 9mm mm23 10mm OS-10mm23* OS-10mm23-* mm mm23 11mm mm23 12mm mm23 13mm mm mm23 14mm mm23 15mm mm33 15mm mm23 16mm mm23 17mm mm23 18mm mm23 19mm mm mm *No ring groove. Magnetic, Short & Standard Length mm Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-6mm M-7mm M-8mm M-9mm M-10mm M-10mm M-11mm M-11mm M-12mm M-12mm M-13mm M-13mm M-14mm M-15mm M-15mm M-16mm M-17mm M-18mm M-18mm

53 3/8 Square rive Sockets, Metric Magnetic, Thin Wall, Standard Length mm Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-8mm M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm Magnetic, Long & Extra Long Length M-6mm M-7mm M-8mm OSM-8mm23* M-9mm M-10mm OSM-10mm23* M-10mm M-11mm M-12mm M-13mm M-13mm M-14mm M-15mm M-15mm M-16mm M-17mm M-18mm *No ring groove. mm Part No. Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () Surface rive, Short and Standard Length mm Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () SF-8mm SF-10mm SF-10mm SF-11mm SF-12mm SF-12mm SF-13mm SF-13mm SF-14mm SF-15mm SF-15mm SF-16mm SF-17mm SF-17mm SF-18mm SF-19mm Surface rive, Thin Wall, Standard Length 3/8 Sq. r. Sockets For Metric Sheet Metal Screws Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 45 mm Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-10mm OSSF-10mm43* SF-11mm SF-12mm SF-13mm SF-15mm SF-17mm SF-18mm SF-19mm *No ring groove. Surface rive, Long & Extra Long Length mm Part Number Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive mm () () () () SF-8mm OSSF-8mm23* SF-10mm OSSF-10mm23* SF-10mm SF-11mm SF-12mm SF-13mm SF-13mm SF-15mm SF-15mm SF-17mm SF-18mm SF-19mm *No ring groove. 6 Point & 6 Point Magnetic, for Predrilled Holes Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm () () () () - M-6mmE M-7mmE mmE3 M-8mmE mmE3 M-10mmE M-11mmE mmE3 M-13mmE mm

54 3/8 Sq. r. Socket Sets, Metric 6 Point PS312M PS312LM 12 piece, standard length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 12 piece, long length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 3/8 Sq. r. Ironand Universal Wrenches, Metric 6 Point Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point mm () mm () mm () mm () mm (E) mm S M S M S M S M S M S M S M Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Sq. r. Universal Wrench Set, Metric 6 Point PU37M 7 piece, standard length: 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm E 3/8 Sq. r. Universal Wrenches, Metric Extension 6 Point Standard and Tension Type Tension Type Standard Type Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm K-6-10m K-6-10m-6 K-6-10m K-6-10m-9 K-6-10m K-6-10m K-7-11m K-7-11m-12 K-7-11m K-7-12m K-7-12m-6 K-7-12m K-7-12m-9 K-7-12m K-7-12m-12 K-7-12m K-7-13m K-7-13m K-7-13m-6 K-7-13m K-7-13m-9 K-7-13m K-7-13m-12 K-7-13m K-7-14m-6 K-7-14m K-7-14m K-8-15m K-8-15m K-8-15m-9 K-8-15m K-8-15m-12 K-8-15m Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Sq. r. Ironand Univ. Wrenches, Metric 6 Point Standard and Tension Type Standard Type Tension Type E E Part Number Standard Part Number Tension Hex Open. mm O L. () mm Soc. L. () mm Soc. ia. () mm Nose ia. () mm lear. epth (E) mm KW--6-10M-6 KW--6-10M KW--6-10M-9 KW--6-10M KW--7-12M-6 KW--7-12M KW--7-12M-12 KW--7-12M KW--7-13M-6 KW--7-13M KW--7-13M-12 KW--7-13M KW--7-14M-6 KW--7-14M KW--8-15M-9 KW--8-15M Universal wrenches must not be used with impact drivers. Maximum operating angle is Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

55 3/8 Sq. r. Socket Head its, Metric omplete, dapter Only, Insert Only Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-3-7-4mm S-314 SZ-7-4mm 4mm 2 1/ /8 35 SZ-3-7-5mm S-314 SZ-7-5mm 5mm 2 1/ /8 35 SZ-3-7-6mm S-314 SZ-7-6mm 6mm 2 1/ /8 35 SZ-3-7-8mm S-314 SZ-7-8mm 8mm 2 1/ /8 35 SZ mm S-314 SZ-7-10mm 10mm 2 1/ /8 35 See page 19 for more 3/8 drive complete socket head bits. 3/8 Sq. r. Sockets For Spline Fasteners Standard and Long Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS / / /32 17 MS /8 2 1/ / /32 17 MS /16 1 1/ / /16 18 MS /2 1 1/ / /32 18 MS /16 1 1/ / /16 21 MS /16 2 3/ / /16 21 MS /8 1 3/ /8 22 7/8 22 pex spline sockets conform to military specifications MS and MIL-W /8 Sq. r. Torx Sockets For External Torx Screws Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3106 E-6 1 1/4 32 3/8 10 3/4 19 TX-3107 E-7 1 1/4 32 3/8 10 3/4 19 TX-3108 E-8 1 1/4 32 7/ /4 19 TX-3110 E /4 32 1/2 13 3/4 19 TX-3112 E /4 32 5/8 16 3/4 19 TX-3114 E / / /4 19 TX-3116 E / / /16 21 For External Torx Screws, Thin Wall Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3406 E-6 1 1/4 32 5/16 8 5/8 16 TX-3407 E-7 1 1/ /32 9 5/8 16 TX-3408 E-8 1 1/4 32 3/8 10 5/8 16 TX-3508 E /8 10 5/8 16 TX-3410 E /4 32 1/2 13 5/8 16 TX-3412 E /4 32 9/ /8 16 TX-3414 E /4 32 5/8 16 3/4 19 Some Torx sockets have a IN (pin and o-ring) groove. For Torx Nuts Overall Nose End rive End Part river Length () iameter () iameter () Number Size In. mm In. mm In. mm TX-3E08 E-8 1 1/4 32 5/8 16 5/8 16 TX-3E10 E /4 32 5/8 16 5/8 16 Sockets for Torx nuts have a larger lead-in chamfer than sockets for external Torx screws. Most Torx sockets have a IN (pin and o-ring) groove. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 47

56 3/8 Sq. r. Extensions 1 1/4 to 18 (32mm to 457mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-374 3/8 Pin 1 3/8 34 EX-374-3/8 all 1 3/8 34 EX /8 Pin 2 51 EX /8 all 2 51 EX /8 Pin 3 76 EX /8 all 3 76 EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin EX /8 all EX /8 Pin /8 Sq. r. dapters 1/4 to 3/4 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm 3/8 Sq. r. Universal dapters Male Square to Female Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-27 1/4 3/8 Pin 1 5/ /4 19 MF-27-1/4 3/8 all 1 5/ /4 19 MF-37 3/8 3/8 Pin 2 1/8 54 3/4 19 MF-37-3/8 3/8 all 2 1/8 54 3/4 19 MF-38-3/8 3/8 all 2 1/2 64 7/8 22 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 3/8 Sq. r. Universal dapters Extension (Standard Type Shown) Male Square to Female Square Part No. Part No. Male Female Type of Largest iameter Standard Tension Square In. Square In. Lock In. mm KM-37-3 KM /8 3/8 Pin 3/ KM /8 3/8 Pin 3/ KM /8 3/8 all 3/4 19 KM-38-6 KM /8 3/8 Pin 7/8 22 Standard lengths are 3, 6, 9 and 12 (76, 152, 229 and 305mm) EX-254 1/4 3/8 Pin 1 1/4 32 EX-254-1/4 3/8 all 1 1/4 32 EX /4 3/8 Pin 2 51 EX /4 3/8 all 2 51 EX /4 3/8 Pin 3 76 EX /4 3/8 all 3 76 EX /4 3/8 Pin EX /4 3/8 all EX /4 3/8 Pin EX /4 3/8 all EX /4 3/8 Pin EX /4 3/8 all EX-503 1/2 3/8 Pin 1 1/2 38 EX-503-1/2 3/8 all 1 1/2 38 EX /2 3/8 Pin 2 51 EX /2 3/8 Pin 3 76 EX /2 3/8 all 3 76 EX /2 3/8 Pin EX /2 3/8 all EX /2 3/8 Pin EX /2 3/8 all EX-622 5/8 3/8 Pin 1 1/2 38 EX-750 3/4 3/8 7/32 rill Hole 1 1/2 38 EX-750-3/4 3/8 all 1 1/ Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

57 1/2 Square rive Sockets, SE 6 Point and ouble Hex, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () 6 Point and ouble Hex, Thin Wall, Standard Length /4 1 1/2 7/16 15/16 5/ /16 1 1/2 1/2 15/16 3/16 *5430 * /16 1 1/2 1 1/4 1 1/4 5/ /8 1 1/2 5/8 15/16 1/ /2 1 3/8 1 3/8 5/ /16 1 1/2 11/16 15/16 9/ /16 1 5/8 1 7/16 1 7/16 11/ /2 1 1/2 13/16 15/16 11/ /8 1 5/8 1 1/2 1 1/2 3/4 SH-335-1/2 1 1/2 45/64 15/16 11/ /16 1 5/8 1 5/8 1 5/8 3/ /16 1 1/2 7/8 15/16 7/ /4 1 3/4 1 11/16 1 3/4 13/16 SH-336 SH-336-9/16 1 1/2 27/32 15/16 7/ /16 1 3/4 1 25/32 1 7/8 13/ /32 1 1/2 15/16 15/16 7/16 * Extra thin wall ** No ring groove /8 1 1/ /16 SH-338 SH-338-5/8 1 1/2 15/16 1 7/16 6 Point and ouble Hex, /16 1 1/2 1 1/8 1 1/8 7/16 SH /16 1 1/2 1 1/64 1 1/16 7/16 Long & Extra SW-282 SW-282-3/4 1 1/2 1 1/4 1 1/4 15/32 Long Length /4 1 1/2 1 1/8 1 1/8 15/32 Part Part Hex Overall iameter iameter Opening /16 1 1/2 1 1/4 1 1/4 17/32 Number Number Opening Length Nose End rive End epth /8 1 1/2 1 5/16 1 5/16 9/16 6 Point ouble Hex In. () () () () /16 1 1/2 1 3/8 1 3/8 5/ /32 1 1/2 1 1/2 1 1/2 5/ /16 2 1/4 1/2 15/16 3/ /2 1 1/2 1 1/2 5/ /16 3 1/4 1/2 15/16 3/ /16 1 5/8 1 1/2 1 1/2 11/ /8 2 1/4 5/8 15/16 1/ /8 1 5/8 1 5/8 1 5/8 3/ /8 3 1/4 5/8 15/16 1/ /16 1 5/8 1 3/4 1 3/4 3/ /16 2 1/4 11/16 15/16 9/ /4 1 3/4 1 3/4 1 3/4 13/ /16 3 1/4 11/16 15/16 9/ /16 1 3/4 1 7/8 1 7/8 13/ /2 2 1/4 13/16 15/16 11/ /8 1 7/ / /2 3 1/4 13/16 15/16 11/ / / /16 2 1/4 7/8 15/16 7/ / /8 2 1/ /16 3 1/4 7/8 15/16 7/ / /8 2 3/8 1 1/ /8 2 1/ / / /8 2 3/8 1 1/ /8 3 1/ / / /2 2 1/2 1 1/ /16 2 1/4 1 1/8 1 1/8 7/ /16 3 1/4 1 1/8 1 1/8 7/ /4 2 1/4 1 1/8 1 1/8 15/32 6 Point and /4 3 1/4 1 1/8 1 1/8 15/32 ouble Hex, SW-493-3/4 2 1/4 1 1/4 1 1/4 15/ /16 2 1/4 1 1/4 1 1/4 17/32 Thin Wall, /16 3 1/2 1 1/4 1 1/4 17/32 Standard Length /8 2 1/4 1 5/16 1 5/16 9/16 Part Part Hex Overall iameter iameter Opening /8 3 1/2 1 5/16 1 5/16 9/16 Number Number Opening Length Nose End rive End epth /16 2 1/4 1 3/8 1 3/8 5/8 6 Point ouble Hex In. () () () () /16 3 1/2 1 3/8 1 3/8 5/ /4 1 1/2 1 1/2 5/ /8 1 1/2 19/32 15/16 1/ /2 1 1/2 1 1/2 5/ /16 1 1/2 21/32 15/16 9/ /16 2 3/8 1 1/2 1 1/2 11/ /2 1 1/2 23/32 15/16 11/ /16 3 1/2 1 1/2 1 1/2 11/ /16 1 1/2 13/16 15/16 7/ /8 2 3/8 1 5/8 1 5/8 3/ /8 1 1/2 7/8 15/16 7/ /8 3 1/2 1 5/8 1 5/8 3/ /32 1 1/2 29/32 15/16 7/ /16 2 3/8 1 3/4 1 3/4 3/4 *5422 * /16 1 1/2 15/16 15/16 7/ /16 3 1/2 1 3/4 1 3/4 3/4 OS-5424** - 3/4 1 1/2 1 1/32 1 1/32 15/ /4 2 1/2 1 3/4 1 3/4 13/ /4 1 1/2 1 1/32 1 1/8 15/ /4 3 1/2 1 3/4 1 3/4 13/ /16 1 1/2 1 1/8 1 1/8 17/ /16 2 1/2 1 7/8 1 7/8 13/16 HE-1028 HE /8 1 1/2 1 1/4 1 1/4 9/ /16 3 1/2 1 7/8 1 7/8 13/16 *5428-7/8 1 1/2 1 3/16 1 1/4 9/ /8 2 1/ /16 HE /16 1 1/2 1 5/16 1 5/16 5/ /8 3 5/ /16 * Extra thin wall ontinued on next column. ** No ring groove /2 2 1/2 2 1/8 2 1/ /2 3 3/4 2 1/8 2 1/ Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. ontinued from previous column. Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () ()

58 1/2 Square rive Sockets, SE 6 Point and ouble Hex, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /16 3 1/4 1/2 15/16 3/ /8 3 1/4 19/32 15/16 1/ /16 3 1/4 21/32 15/16 9/ /2 3 1/4 23/32 15/16 11/32 OS-5516* - 1/2 3 1/4 47/64 7/8 11/ /16 3 1/4 13/16 15/16 7/16 OS-5518* - 9/16 3 1/4 13/16 27/32 7/ /8 3 1/4 7/8 15/16 7/ /16 3 1/4 15/16 15/16 7/ /4 3 1/4 1 1/32 1 1/8 15/ /16 3 1/2 1 1/8 1 1/8 17/ /8 3 1/2 1 3/16 1 1/4 9/ /16 3 1/2 1 1/4 1 1/4 5/ /2 1 3/8 1 3/8 5/ /16 3 1/2 1 7/ /16 11/16 * No ring groove. Magnetic, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /16 1 1/2 1/2 15/16 3/16 M /8 1 1/2 5/8 15/16 1/4 M /16 1 1/2 11/16 15/16 9/32 M /2 1 1/2 13/16 15/16 11/32 MSH-335 1/2 1 1/2 45/64 15/16 11/32 M /16 1 1/2 7/8 15/16 7/16 MSH-336 9/16 1 1/2 27/32 15/16 7/16 M /8 1 1/ /16 M /16 1 1/2 1 1/8 1 1/8 7/16 M /4 1 1/2 1 1/8 1 1/8 15/32 Magnetic, Long Length & Extra Long Length Part No. Part No. Hex Overall iameter iameter Opening Fixed olt Opening Length Nose End rive End epth Magnet learance In. () () () () - M /8 2 1/4 5/8 15/16 1/4 M-5512* - 3/8 3 1/4 19/32 15/16 1/4 - M /16 2 1/4 11/16 15/16 9/32 M-5216 M /2 2 1/4 13/16 15/16 11/32 M /2 3 1/4 13/16 15/16 11/32 M /16 2 1/4 7/8 15/16 7/16 - M-HE9518 9/16 2 1/4 7/8 15/16 7/16 M-5518* - 9/16 3 1/4 13/16 15/16 7/16 - M /8 2 1/ /16 *Thin Wall Surface rive & Fast Lead, Standard Length Part No. Part No. Hex Overall iameter iameter Opening Fixed Fast Opening Length Nose End rive End epth Magnet Lead In. () () () () SF /8 1 1/2 5/8 15/16 1/4 - FL /16 1 1/2 11/16 15/16 9/32 SF-5116 FL /2 1 1/2 13/16 15/16 11/32 SF-SH-335 FL-SH-335 1/2 1 1/2 45/64 15/16 11/32 SF-5118 FL /16 1 1/2 7/8 15/16 7/16 SF-SH-336-9/16 1 1/2 27/32 15/16 7/16 SF-5120 FL /8 1 1/ /16 SF-5122 FL /16 1 1/2 1 1/8 1 1/8 7/16 SF-5124 FL /4 1 1/2 1 1/8 1 1/8 15/32 SF-SW-282-3/4 1 1/2 1 1/4 1 1/4 15/32 SF-5126 FL /16 1 1/2 1 1/4 1 1/4 17/32 SF-5128 FL /8 1 1/2 1 5/16 1 5/16 9/16 SF-5130 FL /16 1 1/2 1 3/8 1 3/8 5/8 SF-5132 FL /2 1 1/2 1 1/2 5/8 SF-5134 FL /16 1 5/8 1 1/2 1 1/2 11/16 Magnetic, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet In. () () () () M /2 1 1/2 23/32 15/16 11/32 M /16 1 1/2 13/16 15/16 7/16 M /8 1 1/2 7/8 15/16 7/16 Surface rive & Fast Lead, Thin Wall, Standard Length Part No. Part No. Hex Overall iameter iameter Opening Fixed Fast Opening Length Nose End rive End epth Magnet Lead In. () () () () SF /8 1 1/2 19/32 15/16 1/4 SF /16 1 1/2 21/32 15/16 9/32 SF-5416 FL /2 1 1/2 23/32 15/16 11/32 SF-5418 FL /16 1 1/2 13/16 15/16 7/16 SF /8 1 1/2 7/8 15/16 7/16 SF /16 1 1/2 15/16 15/16 7/16 SF /4 1 1/2 1 1/32 1 1/8 15/32 SF /16 1 1/2 1 1/8 1 1/8 17/32 50 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

59 1/2 Sq. r. Sockets, SE Surface rive & Fast Lead, Long and Extra Long Length Part No. Part No. Hex Overall iameter iameter Opening Surface Fast Opening Length Nose End rive End epth rive Lead In. () () () () SF /8 2 1/4 9/16 15/16 9/32 SF-5216 FL /2 2 1/4 13/16 15/16 11/32 - FL /2 3 1/4 13/16 15/16 11/32 SF-HE-9518 FL- HE /16 2 1/4 7/8 7/8 7/16 SF-5218 FL /16 2 1/4 7/8 15/16 7/16 SF-5318 FL /16 3 1/4 7/8 15/16 7/16 SF-5320 FL /8 3 1/ /16 SF-5222 FL /16 2 1/4 1 1/8 1 1/8 7/16 SF-5224 FL /4 2 1/4 1 1/8 1 1/8 15/32 - FL-SW-493 3/4 2 1/4 1 1/4 1 1/4 15/32 SF-5324 FL /4 3 1/4 1 1/8 1 1/8 15/32 SF-5226 FL /16 2 1/4 1 1/4 1 1/4 17/32 - FL /16 3 1/2 1 1/4 1 1/4 17/32 SF-5228 FL /8 2 1/4 1 5/16 1 5/16 9/16 SF /8 3 1/2 1 5/16 1 5/16 9/16 SF /16 2 1/4 1 3/8 1 3/8 5/8 SF /16 3 1/2 1 3/8 1 3/8 5/8 SF /4 1 1/2 1 1/2 5/8 Surface rive, Thin Wall, Extra Long Length Part No. Hex Overall iameter iameter Opening Surface Opening Length Nose End rive End epth rive In. () () () () 1/2 Sq. r. Sockets For SE Sheet Metal Screws 6 Point & 6 Point Magnetic, for Predrilled Holes* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () 5E10 M5E10 5/16 1 1/2 1/2 15/16 3/16 5E12 M5E12 3/8 1 1/2 5/8 15/16 1/4 - M5E14 7/16 1 1/2 11/16 15/16 9/32 5E16 M5E16 1/2 1 1/2 13/16 15/16 11/32 - M5E18 9/16 1 1/2 15/16 15/16 7/16 6 Point & 6 Point Magnetic, for Self-Tapping Screws* Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic In. () () () () - M5P10 5/16 1 1/2 1/2 15/16 3/16 5P12 M5P12 3/8 1 1/2 5/8 15/16 1/4 5P14 M5P14 7/16 1 1/2 11/16 15/16 9/32 - M5P16 1/2 1 1/2 13/16 15/16 11/32 - M5P18 9/16 1 1/2 15/16 15/16 7/16 *Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. SF /16 3 1/4 21/32 15/16 9/32 SF /2 3 1/4 23/32 15/16 11/32 SF /16 3 1/4 13/16 15/16 7/16 SF /8 3 1/4 7/8 15/16 7/16 SF /4 3 1/4 1 1/32 1 1/8 15/32 SF /16 3 1/4 1 1/8 1 1/8 17/32 SF /8 3 1/2 1 3/16 1 1/4 9/16 SF /2 1 3/8 1 3/8 5/8 If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website Indicates a commonly requested item that is either in stock or has a max typical leadtime of 4 weeks from the factory. No minimum on these items. 51

60 1/2 Sq. r. Sockets For SE Square Nuts Single Square & ouble Square, Standard Length 52 Part No. Part No. Square Overall iameter iameter Opening Single ouble Opening Length Nose End rive End epth Square Square In. () () () () /32 1 1/2 1/2 15/16 3/ /16 1 1/2 5/8 15/16 1/ /8 1 1/2 3/4 15/16 1/ /16 1 1/2 7/8 15/16 9/ /2 1 1/ / /16 1 1/2 1 1/8 1 1/8 7/ /8 1 1/2 1 1/4 1 1/4 7/ /16 1 1/2 1 1/4 1 1/4 7/ /4 1 1/2 1 3/8 1 3/8 15/ /16 1 1/2 1 1/2 1 1/2 17/ /8 1 1/2 1 5/8 1 5/8 5/ /8 1 3/4 1 3/4 5/ /16 1 3/4 1 7/8 1 7/8 11/ /8 1 3/ /4 Single Square & ouble Square, Thin Wall, Standard Length Part Part Square Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth Square ouble Square In. () () () () /8 1 1/2 11/16 15/16 1/ /16 1 1/2 25/32 15/16 9/ /16 1 1/ / /8 1 1/2 1 3 /32 1 1/8 7/16 Single Square & ouble Square, Long & Extra Long Length Part Part Square Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth Square ouble Square In. () () () () /8 3 1/4 3/4 15/16 1/ /2 2 1/ / /2 3 1/ / /8 2 1/4 1 1/4 1 1/4 7/ /8 3 1/2 1 1/4 1 1/4 7/ /16 3 1/2 1 1/4 1 1/4 7/ /4 2 1/4 1 3/8 1 3/8 15/ /16 3 1/2 1 1/2 1 1/2 17/ /8 2 1/4 1 5/8 1 5/8 5/ /2 1 3/4 1 3/4 5/ /16 3 1/2 1 7/8 1 7/8 11/ /8 3 1/ /4 1/2 Sq. r. Socket Sets, SE 6 Point PS58XL 8 piece, extra long length: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 1/2 Sq. r. Universal Wrenches, SE 6 Point & ouble Hex Part Part Hex Overall Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth 6 Point 12 Point In. () In. () In. () In. () In. (E) In. S-120 S-120-5/ /64 3/4 3/4 7/16 5/16 S-216 S-216-3/8 2 11/64 7/8 7/8 9/16 11/32 S-217 S-217-7/ /64 15/16 7/8 5/8 13/32 S-316-7/ /64 15/16 1 5/8 3/8 S-218 S-218-1/2 2 19/64 1 7/8 11/16 15/32 S-317-1/2 2 31/ /16 7/16 S-219 S-219-9/ /64 1 1/16 7/8 3/4 17/32 S-318 S-318-9/ /64 1 1/8 1 3/4 9/16 S-221 S-221-5/8 2 27/64 1 1/8 7/8 7/8 19/32 S-320-5/8 2 33/64 1 3/ /32 5/8 S-402 S-402-5/8 2 49/64 1 1/4 1 1/4 7/8 33/64 S-321 S / /64 1 1/ /16 S-322 S-322-3/4 2 37/64 1 1/4 1 1/8 1 1/8 11/16 S-404 S-404-3/4 2 57/64 1 3/8 1 1/4 1 1/32 5/8 S-501-3/4 3 1/32 1 5/8 1 1/2 1 1/8 25/32 S / /64 1 3/8 1 1/4 1 1/8 41/64 S-407-7/8 2 57/64 1 3/8 1 3/16 1 5/16 41/64 S-409 S / /64 1 3/8 1 5/16 1 5/16 41/64 S /16 3 5/32 1 3/4 1 1/2 1 3/8 29/32 S /64 1 7/16 1 1/2 1 1/2 45/64 S /16 3 1/64 1 1/2 1 1/2 1 1/2 49/64 S /8 3 9/32 1 7/8 1 5/8 1 5/8 1 1/32 S /4 3 13/ /4 1 3/4 1 5/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/2 Sq. r. Ironand Univ. Wrenches, SE 6 Point Part Number Hex Opening In. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. Overall Length () In. Socket Length () In. Socket iameter () In. Nose End iameter () In. E learance epth (E) In. S / S / S / S / S / S / S / S / S / S S / S / S / Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E

61 1/2 Sq. r. Universal Wrench Set, SE 6 Point PU56 6 piece, standard length: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 1/2 Sq. r. Ironand Univ. Wrenches, SE Extension 6 Point Standard Type Tension Type E Universal Wrenches 1/2 Sq. r., SE Extension 6 Point, Standard and Tension Type Tension Type Standard Type Part Part Hex Shank Socket Socket Nose End Opening Number Number Opening Length Length iameter iameter epth Standard Tension In. () In. () In. () In. () In. (E) In. KH-43-6 KN /8 6 13/16 5/8 17/32 7/16 - KN /8 9 13/16 5/8 17/32 7/16 KH-44-6 KN /16 6 7/8 5/8 5/8 1/2 KH /2 3 7/8 11/16 11/16 1/2 KH /2 4 7/8 11/16 11/16 1/2 KH-45-6 KN /2 6 7/8 11/16 11/16 1/2 - KN /2 9 7/8 11/16 11/16 1/2 KH KN / /4 3/4 9/16 - KN / /4 3/4 9/16 KH KN / /8 11/16 15/32 - KN / /8 11/16 15/32 KH / /16 13/16 9/16 KH KN / /16 13/16 9/16 - KN / /16 13/16 9/16 KH KN / /16 13/16 9/16 KH / /16 7/8 3/4 17/32 KH KN / /16 7/8 3/4 17/32 KH KN / /16 7/8 3/4 17/32 - KN / /16 7/8 3/4 17/32 - KN / /8 1 3/4 9/16 KH KN / /8 1 3/4 9/16 KH / /8 7/8 7/8 19/32 KH / /8 7/8 7/8 19/32 KH KN / /8 7/8 7/8 19/32 - KN / /8 7/8 7/8 19/32 KH KN / /8 7/8 7/8 19/32 KH / / /32 5/8 - KN / / /32 5/8 KH / / /16 KH KN / /4 1 1/8 1 1/8 11/16 - KN / /4 1 1/8 1 1/8 11/16 - KN / /4 1 1/8 1 1/8 11/16 - KN / /8 1 1/4 1 1/32 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 KH / /8 1 5/16 1 5/16 41/64 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. ctual design of universal wrenches may not be exactly like pictures above. E Part Number Standard Part Number Tension Hex Open. In. O L. () In. 1/2 Sq. r. Socket Head its, SE omplete, dapter Only, Insert Only Soc. L. () In. Soc. ia. () In. Nose ia. () In. lear. epth (E) In. KHW KNW / KHW KNW / KHW KNW / KHW KNW / KHW KNW / KHW KNW / KHW KNW / KHW KNW / KNW / KHW / Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-22 S-514 SZ-14-1/4 2 1/ /8 35 SZ-23 S-514 SZ-15-5/16 2 1/ /8 35 SZ-24 S-514 SZ-16-3/8 2 1/ /8 35 SZ-25 S-514 SZ-17-1/2 2 1/ /8 35 SZ-42 S-520 SZ-31-1/2 2 1/ /16 35 SZ-43 S-514 SZ-18-9/16 2 1/ /8 35 SZ-44 S-529 SZ-32-9/16 2 1/ /16 35 SZ-26 S-514 SZ-19-5/8 2 1/ /8 35 For a complete listing, see page 19. dapters with an S prefix feature a set screw for locking in the bit. n RP prefix indicates adapters with a roll pin that is inserted through the bit. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 53

62 1/2 Square rive Sockets, Metric 6 Point & ouble Hex, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm. () () () () 10mm15 10mm mm15 11mm mm15 12mm mm15 13mm mm15 14mm mm15 15mm mm15 16mm mm15 17mm mm15 18mm mm15 19mm mm mm15 21mm mm15 22mm mm15 23mm mm15 24mm mm mm15 26mm mm15 27mm mm mm15 29mm mm15 30mm mm15 32mm mm mm mm mm Point & ouble Hex, Thin Wall, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 10mm45 10mm mm45 12mm mm45 13mm mm45 14mm mm45 15mm mm45 16mm mm45 17mm mm45 18mm mm mm45 21mm mm45 22mm mm mm 6 Point & ouble Hex, Long Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 10mm25 10mm mm mm25 12mm mm25 13mm mm mm25 15mm mm25 16mm mm25 17mm mm25 18mm mm mm25 20mm mm25 21mm mm25 22mm mm25 23mm mm25 24mm mm mm mm mm mm25 30mm mm Point & ouble Hex, Extra Long Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 10mm35 10mm mm mm35 12mm mm35 13mm mm35 14mm mm mm35 16mm mm35 17mm mm35 18mm mm35 19mm mm35 20mm mm35 21mm mm35 22mm mm35 24mm mm Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

63 1/2 Square rive Sockets, Metric 6 Point & ouble Hex, Thin Wall, Extra Long Length mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex mm () () () () 10mm55 10mm mm mm55 12mm mm55 13mm mm55 14mm mm55 15mm mm55 16mm mm55 17mm mm55 18mm mm mm55 21mm mm55 22mm mm55 24mm mm mm55 27mm mm mm mm Magnetic, Thin Wall, Standard Length Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-13mm M-14mm M-15mm Magnetic, Long Length mm mm Part No. Part No. Hex Overall iameter iameter Opening Fixed Magnetic Opening Length Nose End rive End epth Magnet olt learance mm () () () () - M-10mm M-12mm M-13mm25 M-13mm M-14mm M-15mm25 M-15mm M-16mm M-18mm25 M-18mm Magnetic, Standard Length mm Part Number Hex Overall iameter iameter Opening Fixed Opening Length Nose End rive End epth Magnet mm () () () () M-10mm M-11mm M-12mm M-13mm M-14mm M-15mm M-16mm M-17mm M-18mm M-19mm M-21mm Magnetic, Extra Long Length mm Part No. Part No. Hex Overall iameter iameter Opening Fixed Magnetic olt Opening Length Nose End rive End epth Magnet learance mm () () () () M-13mm M-13mm55* M-15mm35 M-15mm M-18mm35 M-18mm M-18mm55* *Thin Wall Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 55

64 1/2 Square rive Sockets, Metric Surface rive, Standard Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-20mm SF-21mm SF-22mm SF-23mm SF-24mm Surface rive, Thin Wall, Standard Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm Surface rive, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm SF-24mm Surface rive, Thin Wall, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm Surface rive, Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth Surface rive mm () () () () SF-10mm SF-11mm SF-12mm SF-13mm SF-14mm SF-15mm SF-16mm SF-17mm SF-18mm SF-19mm SF-21mm SF-22mm SF-24mm /2 Sq. r. Sockets For Metric Sheet Metal Screws 6 Point & 6 Point Magnetic, For Regular Screws mm Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point Magnetic mm. () () () () - M-13mmE mmE5 M-15mmE Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

65 1/2 Sq. r. Socket Sets, Metric 6 Point PS511M 11 piece, standard length: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm 1/2 Sq. r. Universal Wrenches, Metric 6 Point 1/2 Sq. r. Universal Wrench Set, Metric 6 Point PU56M 6 piece, standard length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm E Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point mm () mm () mm () mm () mm (E) mm S-57-13m S-57-14m S-58-15m S-58-16m S-58-17m S-58-18m S m S m S m S m S m /2 Sq. r. Ironand Univ. Wrenches, Metric 6 Point Part Number Hex Opening mm Overall Length () mm Socket Length () mm Socket iameter () mm Nose End iameter () mm learance epth (E) mm S M S M S M S M S M S M S M S M Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E 1/2 Sq. r. Universal Wrenches, Metric Extension 6 Point, Standard and Tension Type Tension Type Standard Type Part Part Hex Shank Socket Socket Nose End learance Number Number Opening Length Length iameter iameter epth Standard Tension mm () mm () mm () mm () mm (E) mm - KN-7-12m KN-7-12m KH-7-13m KH-7-13m KH-7-13m-6 KN-7-13m KH-7-13m-9 KN-7-13m KN-7-13m KH-7-14m-6 KN-7-14m KN-7-14m KH-8-15m KH-8-15m-6 KN-8-15m KH-8-15m-9 KN-8-15m KN-8-15m KH-8-16m KH-8-16m KH-8-16m-9 KN-8-16m KH-8-16m-12 KN-8-16m KH-8-17m KH-8-17m KH-8-17m-6 KN-8-17m KH-8-17m-9 KN-8-17m KH-8-18m KH-8-18m KH-8-18m-6 KN-8-18m KH-8-18m-9 KN-8-18m KN-8-18m KH-10-19m KH-10-19m KH-10-19m KH-10-19m Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/2 Sq. r. Ironand Univ. Wrenches, Metric Extension 6 Point Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. Part Number Standard Standard Type Tension Type Part Number Tension Hex Open. mm O L. () mm Soc. L. () mm Soc. ia. () mm Nose ia. () mm E lear. epth (E) mm KHW--7-13m-6 KNW--7-13m KHW--7-13m-9 KNW--7-13m KHW--7-14m-6 KNW--7-14m KHW--8-15m-6 KNW--8-15m KHW--8-15m KNW--8-15m KHW--8-16m-9 KNW--8-16m KHW--8-17m-6 KNW--8-17m KHW--8-17m-9 KNW--8-17m KHW--8-18m-6 KNW--8-18m KHW--8-18m-9 KNW--8-18m Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E 57

66 1/2 Sq. r. Socket Head its, Metric omplete, dapter Only, Insert Only Part Number Overall Length dapter Insert Hex Length of Insert () omplete Only Only Size In. mm In. mm SZ-5-7-8mm S-514 SZ-7-8mm 8mm 2 1/ /8 35 SZ mm S-514 SZ-7-10mm 10mm 2 1/ /8 35 SZ mm S-514 SZ-7-12mm 12mm 2 1/ /8 35 SZ mm S-514 SZ-7-14mm 14mm 2 1/ /8 35 SZ mm RP-520 SZ-10-14mm 14mm 2 1/ /16 40 SZ mm RP-520 SZ-10-17mm 17mm 2 1/ /16 40 For a complete listing, see page 20. 1/2 Sq. r. Sockets For Spline Fasteners Standard & Long Length Overall iameter iameter Part Spline Nominal Length () Nose End () rive End () Number Size Size In. mm In. mm In. mm MS /2 1 1/ / /8 22 MS /16 1 1/ / /32 25 MS /16 1 1/ / /8 29 MS /16 1 1/ / /4 32 pex spline sockets conform to military specifications MS and MIL-W /2 Sq. r. Torx Sockets For External Torx Screws Overall iameter iameter Part river Length () Nose End () rive End () Number Size In. mm In. mm In. mm TX-5110 E /2 38 9/ TX-5112 E /2 38 5/ TX-5114 E / / TX-5116 E / / TX-5118 E /2 38 7/ TX-5120 E / /16 30 TX-5124 E / / /16 33 For External Torx Screws, Thin Wall Overall iameter iameter Part river Length () Nose End () rive End () Number Size In. mm In. mm In. mm TX-5408 E-8 1 1/2 38 3/8 10 7/8 22 TX-5410 E /2 38 1/2 13 7/8 22 TX-5412 E /2 38 9/ /8 22 TX-5414 E /2 38 5/8 16 7/8 22 TX-5416 E /2 38 7/8 22 7/8 22 TX-5418 E / / /16 24 TX-5420 E / / / /2 Sq. r. Extensions 1 23/32 to 18 (44amm to 457mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-504 1/2 Pin 1 23/32 44 EX-504-1/2 all 1 23/32 44 EX /2 Pin 2 51 EX /2 all 2 51 EX /2 Pin 3 76 EX /2 all 3 76 EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 all EX /2 Pin EX /2 Pin /2 Sq. r. dapters 1/4 to 5/8 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-260 1/4 1/2 Pin 1 1/2 38 EX-260-1/4 1/2 all 1 1/2 38 EX /4 1/2 all 2 51 EX /4 1/2 Pin EX-375 3/8 1/2 Pin 1 1/2 38 EX-375-3/8 1/2 all 1 1/2 38 EX /8 1/2 Pin 2 51 EX /8 1/2 all 2 51 EX /8 1/2 Pin 3 76 EX /8 1/2 all 3 76 EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin EX /8 1/2 all EX /8 1/2 Pin Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

67 1/2 Sq. r. dapters 5/8 to 3/4 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-623 5/8 1/2 Pin 1 1/2 38 EX-623-5/8 1/2 all 1 1/2 38 EX /8 1/2 Pin 3 76 EX-751 3/4 1/2 7/32 drill hole 1 13/16 46 EX-751-3/4 1/2 all 1 13/ /2 Sq. r. Universal dapters 3/8 to 3/4 Male Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm in. mm MF-39 3/8 1/2 Pin 2 9/ /8 22 MF-39 3/8 1/2 all 2 9/ /8 22 MF-50 1/2 1/2 Pin 2 11/ MF-50 1/2 1/2 all 2 11/ MF-55 1/2 1/2 Pin 3 1/ /4 32 MF-55 1/2 1/2 all 3 1/ /4 32 MF-70 3/4 1/2 7/32 drill hole 3 5/ /2 38 MF-70 3/4 1/2 all 3 5/ /2 38 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. 1/2 Sq. r. Universal dapters Extension 1/2 Male Square (Standard Type Shown) Part Number Male Female Type of Largest ia. Standard Tension Sq. In. Sq. In. Lock In. mm KHM-37-6 KNM /8 1/2 Pin 3/4 19 KHM-38-6 KNM /8 1/2 Pin 7/8 22 KHM-50-6 KNM /2 1/2 Pin 1 25 KHM KNM /2 1/2 all 1 25 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Standard lengths are 3, 6, 9 and 12 (76, 152, 229 and 305mm) If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 59

68 5/8 Square rive Sockets, SE 6 Point & ouble Hex, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /16 1 7/8 7/8 1 1/4 7/ /8 1 7/ /4 7/ /16 1 7/8 1 1/8 1 1/4 7/ /4 1 7/8 1 1/4 1 1/4 15/ /8 1 7/8 1 3/8 1 3/8 9/ / /8 1 5/8 11/ / /8 1 5/8 3/ / /8 1 7/8 13/ / / /8 2 1/ / /16 2 1/8 2 1/8 2 1/8 15/ /2 2 1/4 2 1/8 2 1/8 1 6 Point & ouble Hex, Thin Wall Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /16 1 7/8 1 1/8 1 1/4 17/ / /16 1 5/16 5/8 6 Point & ouble Hex, Extra Long Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /8 3 1/ /4 7/ /16 3 1/2 1 1/8 1 1/4 7/ /4 3 1/2 1 1/4 1 1/4 15/ /16 3 1/2 1 1/4 1 1/4 17/ /16 3 1/2 1 1/2 1 1/2 5/ /8 3 1/2 1 5/8 1 5/8 3/ /4 3 1/2 1 7/8 1 7/8 13/ /16 3 1/ / /8 3 1/ / /2 3 1/2 2 1/8 2 1/8 1 6 Point & ouble Hex, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /8 3 1/2 15/16 1 1/4 7/ /4 3 1/2 1 1/16 1 1/4 15/ /8 3 1/2 1 3/16 1 1/4 9/16 Surface rive & Fast Lead, Standard Length Part No. Part No. Hex Overall iameter iameter Opening Surface Fast Opening Length Nose End rive End epth rive Lead In. () () () () SF /16 1 7/8 7/8 1 1/4 7/16 SF /8 1 7/ /4 7/16 SF-6124 FL /4 1 7/8 1 1/4 1 1/4 15/32 SF-6424* - 3/4 1 7/8 1 1/16 1 1/4 15/32 SF-6128 FL /8 1 7/8 1 3/8 1 3/8 9/16 *Thin Wall Surface rive & Fast Lead, Thin Wall, Extra Long Length Part No. Part No. Hex Overall iameter iameter Opening Surface Fast Opening Length Nose End rive End epth rive Lead In. () () () () SF /8 3 1/ /4 7/16 SF-6324 FL /4 3 1/2 1 1/4 1 1/4 15/32 SF-6524* - 3/4 3 1/2 1 1/16 1 1/4 15/32 SF /16 3 1/2 1 1/4 1 1/4 17/32 SF /8 3 1/2 1 3/8 1 3/8 9/16 SF /16 3 1/2 1 1/2 1 1/2 5/8 *Thin Wall 60 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

69 5/8 Sq. r. Sockets, Metric 6 Point & Surface rive, Standard Length mm Part Part No. Hex Overall iameter iameter Opening Number Surface Opening Length Nose End rive End epth 6 Point rive mm () () () () - SF-15mm mm16 SF-16mm mm16 SF-17mm mm16 SF-18mm SF-19mm mm16 SF-21mm SF-22mm mm16 SF-24mm /8 Sq. r. Extensions 1 7/8 to 15 (48mm to 381mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-624 5/8 Pin 1 7/8 48 EX-624-5/8 all 1 7/8 48 EX /8 Pin 3 76 EX /8 Pin EX /8 Pin EX /8 Pin EX /8 Pin EX /8 Pin Point & Surface rive, Extra Long Length 5/8 Sq. r. dapters Part Part No. Hex Overall iameter iameter Opening Number Surface Opening Length Nose End rive End epth 6 Point rive mm () () () () - SF-15mm mm SF-18mm mm36 SF-19mm mm36 SF-21mm SF-22mm mm36 SF-24mm mm 1/2 to 3/4 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-505 1/2 5/8 Pin 1 7/8 48 EX-505-1/2 5/8 all 1 7/8 48 EX /2 5/8 Pin 3 76 EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX /2 5/8 Pin EX-752 3/4 5/8 7/32 rill Hole 1 7/8 48 EX-752-3/4 5/8 all 1 7/8 48 5/8 Sq. r. Universal dapters 1/2 to 5/8 Male Square Part Male Female Type of Overall Length Largest iameter Number Square In. Square In. Lock In. mm in. mm MF-51 1/2 5/8 Pin 3 5/ /4 32 MF-62 5/8 5/8 Pin 3 1/ /4 32 MF-62 5/8 5/8 all 3 1/ /4 32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 61

70 3/4 Square rive Sockets, SE 6 Point & ouble Hex, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () / /16 1 1/2 7/ / /8 1 1/2 7/ / /4 1 1/2 15/ / /2 1 1/2 9/ / /2 1 1/2 5/ /8 1 5/8 5/ / /4 1 3/4 11/ /8 2 1/8 1 3/4 1 3/4 3/ /4 2 1/ /4 13/ /16 2 1/ /4 13/ /8 2 1/8 2 1/8 2 1/8 13/ /16 2 1/4 2 1/4 2 1/8 15/ /2 2 1/4 2 1/4 2 1/ /8 2 1/4 2 1/2 2 1/8 1 1/ /16 2 1/4 2 1/2 2 1/8 1 1/ /4 2 1/4 2 5/8 2 1/8 1 1/ /16 2 1/4 2 3/4 2 1/8 1 1/ /8 2 1/4 2 3/4 2 1/8 1 1/ /8 2 7/8 2 1/8 1 3/ /8 2 3/8 3 1/8 2 1/8 1 3/ /16 2 1/2 3 1/8 2 1/8 1 1/ /4 2 1/2 3 1/4 2 1/8 1 1/ /8 2 5/8 3 1/2 2 1/8 1 5/ /2 2 5/8 3 1/2 2 1/8 1 5/8 6 Point & ouble Hex, Thin Wall Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () / /8 1 3/8 15/ / /4 1 3/8 17/ / /16 1 3/8 9/ / /8 1 3/8 5/ /16 1 7/16 5/ / /2 1 1/2 11/ /8 2 1/8 1 5/8 1 5/8 3/ /16 2 1/8 1 5/8 1 5/8 3/ /16 2 1/8 1 7/8 1 3/4 13/ /16 2 1/ /4 15/ /2 2 1/4 2 1/8 2 1/ /16 2 1/4 2 3/8 2 1/8 1 1/ /4 2 1/4 2 7/16 2 1/8 1 1/8 6 Point & ouble Hex, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () 7324SKT / /4 1 1/2 15/ / /16 1 1/2 9/ / /2 1 1/2 5/ /2 1 1/2 5/ / /8 1 5/8 11/ / /4 1 3/4 3/ / /8 1 3/4 13/ / /4 13/ / /8 2 1/8 15/ / /4 2 1/ / /2 2 1/8 1 1/ / /8 2 1/8 1 1/ / /4 2 1/8 1 1/ / /4 2 1/8 1 1/ / /4 2 1/8 1 1/ /8 2 7/8 2 1/8 1 3/ /4 4 1/4 3 1/4 2 1/8 1 1/2 6 Point & ouble Hex, Thin Wall, Extra Long Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () / /8 1 3/8 15/ / /8 1 3/8 9/ / /8 1 3/8 5/ / /8 1 5/8 3/ / /4 1 3/4 13/ / /8 1 3/4 13/ / /8 2 1/ / /4 2 1/8 1 1/ / /2 2 1/8 1 1/8 62 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

71 3/4 Square rive Sockets For SE Square Nuts Single Square & ouble Square, Standard Length Part No. Square Overall iameter iameter Opening Single Opening Length Nose End rive End epth Square In. () () () () / /2 1 1/2 15/ / /4 1 3/4 5/ /16 2 1/8 1 7/8 1 3/4 5/ / /4 5/ /8 2 1/8 2 1/8 2 1/8 3/4 3/4 Square rive Universal Wrenches, SE 6 Point Part Hex Overall Socket Socket Nose End learance Number Opening Length Length iameter iameter epth 6 Point In. () In. () In. () In. () In. (E) In. S / /32 1 3/4 1 1/2 1 3/8 29/32 S /16 4 1/ /16 1 3/4 1 1/2 29/32 S / /32 1 7/8 1 5/8 1 5/8 1 1/32 S /16 4 3/ /4 1 5/8 31/32 S /8 3 29/32 1 7/8 1 5/8 1 5/8 1 1/32 S /8 4 5/32 2 1/16 1 3/4 1 3/4 1 1/32 S /4 4 7/32 2 1/8 1 7/8 1 7/8 1 3/32 S /16 4 7/32 2 1/8 1 7/8 1 7/8 1 3/32 S / /32 2 1/4 2 1/8 2 1/8 1 5/32 S /2 4 11/32 2 1/4 2 1/4 2 1/4 1 5/32 S /8 4 11/32 2 3/8 2 3/8 2 3/8 1 3/16 S /8 4 11/32 2 3/8 2 5/8 2 5/8 1 3/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. E Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 63

72 3/4 Sq. r. Sockets, Metric 6 Point, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 17mm mm mm mm mm mm mm47* mm mm47* mm mm mm47* mm mm mm47* mm mm47* mm mm mm mm mm *Thin Wall 6 Point, Extra Long Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 21mm mm57* mm57* mm mm57* mm mm mm57* mm mm mm mm57* mm mm mm mm mm *Thin Wall mm 3/4 Sq. r. Extensions 2 1/4 to 15 (57mm to 381mm) Length Part Male Square Type of Overall Length Number In. Lock In. mm EX-753 3/4 7/32 rill Hole 2 1/4 57 EX-753-3/4 all 2 1/4 57 EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 7/32 rill Hole EX /4 all EX /4 7/32 rill Hole EX /4 all /4 Sq. r. dapters 1/2 to 1 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-506 1/2 3/4 Pin 2 51 EX-506-1/2 3/4 all 2 51 EX /2 3/4 Pin 3 76 EX /2 3/4 all 3 76 EX /2 3/4 Pin EX /2 3/4 all EX /2 3/4 all EX /2 3/4 Pin EX /2 3/4 all EX /2 3/4 Pin EX /2 3/4 all EX-625 5/8 3/4 Pin 2 51 EX-625-5/8 3/4 all 2 51 EX /8 3/4 Pin 3 76 EX /4 9/32 rill Hole 2 9/16 65 EX /4 all 2 9/ /4 Sq. r. Universal dapters 3/4 Male Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-75 3/4 3/4 7/32 rill Hole /2 38 MF-75 3/4 3/4 all /2 38 MF-76 3/4 3/4 7/32 rill Hole 4 3/ /4 45 MF-76 3/4 3/4 all 4 3/ /4 45 Universal wrenches must not be used with impact drivers. Maximum operating angle is Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

73 1 Square rive Sockets, SE 6 Point & ouble Hex, Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /4 2 1/8 1 5/ / /16 2 1/8 1 3/8 2 13/ /8 2 1/8 1 1/2 2 13/ /16 2 1/8 1 1/2 2 13/ /8 1 5/8 2 13/ /16 2 1/8 1 11/ / /8 2 1/8 1 3/4 2 13/ /16 2 1/8 2 1/8 2 13/ /4 2 1/8 2 1/8 2 1/8 13/ /16 2 1/8 2 1/8 2 1/8 13/ /8 2 1/8 2 1/8 2 1/8 13/ /16 2 1/4 2 1/4 2 1/8 15/ /2 2 1/4 2 1/4 2 1/8 15/ /16 2 1/4 2 3/8 2 1/8 15/ /8 2 3/8 2 1/2 2 1/8 15/ /8 2 1/2 2 3/4 2 5/8 1 1/ /16 2 1/2 2 7/8 2 5/8 1 1/ /16 2 3/4 3 1/4 3 1/4 1 5/ /4 2 3/4 3 1/4 3 1/4 1 5/ /16 2 3/4 3 3/8 3 1/4 1 3/ /8 2 7/8 3 1/2 3 1/4 1 3/ /2 2 7/8 3 3/4 3 1/4 1 3/ / /4 1 1/ /4 3 1/ /4 1 5/ /16 3 1/ /4 1 5/8 6 Point & ouble Hex, Thin Wall Standard Length Part Part Hex Overall iameter iameter Opening Number Number Opening Length Nose End rive End epth 6 Point ouble Hex In. () () () () /16 2 1/8 1 7/16 1 7/8 13/ /8 1 1/2 1 7/8 13/ /16 2 1/8 1 9/16 1 7/8 13/ /8 2 1/8 1 5/8 1 7/8 13/ /4 2 1/8 1 13/ / /16 2 1/8 1 7/8 2 13/ /8 2 1/8 1 15/ / /2 2 1/4 2 1/8 2 1/8 15/ /16 2 3/8 2 3/8 2 1/8 15/ /4 2 3/8 2 7/16 2 1/8 1 1/ /16 2 1/2 2 9/16 2 1/8 1 1/ /8 2 1/2 2 5/8 2 5/8 1 1/ /8 2 3/4 2 5/8 1 3/ /8 2 5/8 2 15/16 2 5/8 1 3/ /4 2 3/4 3 1/8 2 5/8 1 5/ /2 2 7/8 3 3/8 3 1/4 1 7/16 6 Point, Long Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () / /16 2 1/8 9/ / /4 2 1/8 3/ / /8 2 1/8 13/16 6 Point, Extra Long Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /4 4 1/4 1 1/4 2 1/8 15/ /16 4 1/4 1 3/8 2 1/8 17/ /4 1 9/16 2 1/8 5/ /8 4 1/4 1 3/4 2 1/8 3/ /16 4 1/4 1 7/8 2 1/8 3/ /4 4 1/4 2 1/8 2 1/8 13/ /16 4 1/4 2 1/8 2 1/8 13/ /16 4 1/4 2 1/4 2 1/8 15/ /4 4 1/4 2 5/8 2 5/8 1 1/ /8 4 1/4 2 3/4 2 5/8 1 1/ /8 2 7/8 2 5/8 1 3/ /16 4 1/2 3 1/8 2 5/8 1 1/ /16 4 1/2 3 1/2 3 1/4 1 5/ /2 4 1/2 3 1/2 3 1/4 1 5/ /16 4 1/2 3 3/4 3 1/4 1 3/ /8 4 1/2 3 3/4 3 1/4 1 3/4 6 Point, Thin Wall, Extra Long Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /16 4 1/4 1 1/2 2 1/8 5/ /8 4 1/4 1 5/8 2 1/8 3/ /4 4 1/4 1 13/16 2 1/8 13/ /16 4 1/4 1 7/8 2 1/8 13/16 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 65

74 1 Sq. r. Sockets, SE Single Square & ouble Square, Standard Length udd Wheel Sockets 13/16 Square & ombo 13/16 Square 1 1/2 Hex Part Overall Length Number rive In. mm W Square 2 1/ /16 Square W Square 3 3/4 95 ombo. 13/16 Square 1 1/2 Hex W-848-F 1 Square 3 3/4 95 ombo. 13/16 Square 1 1/2 Hex for mag. wheels Part No. Part No. Square Overall iameter iameter Opening Single ouble Opening Length Nose End rive End epth Square Square In. () () () () /4 2 1/8 1 5/8 2 13/ /8 2 1/8 2 1/8 13/ /16 2 1/8 2 1/8 2 1/8 13/ /8 2 1/4 2 1/4 2 1/8 15/ /16 2 1/4 2 1/4 2 1/8 15/ /4 2 1/4 2 3/8 2 1/8 15/ /8 2 5/16 2 5/8 2 5/ /16 2 3/8 2 5/8 2 5/ /2 2 3/8 2 3/4 2 5/8 1 1/ /8 2 1/2 2 7/8 2 5/8 1 1/16 1 Sq. r. Sockets, Metric 6 Point, Standard Length mm Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 21mm mm mm mm mm mm48* mm mm mm mm mm mm mm *Thin Wall 6 Point, Long Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point mm () () () () 24mm mm mm mm mm mm mm mm Sq. r. Extensions 2 13/16 to 15 (71mm to 381mm) Length mm Part Male Square Type of Overall Length Number In. Lock In. mm 66 EX /32 rill Hole 2 13/16 71 EX all 2 13/16 71 EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all EX /32 rill Hole EX all Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

75 1 Sq. r. dapters 3/4 to 1 1/2 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX-754 3/4 1 7/32 rill Hole 2 13/16 71 EX-754-3/4 1 all 2 13/16 71 EX /4 1 7/32 rill Hole EX /4 1 7/32 rill Hole EX /4 1 7/32 rill Hole EX /2 1 3/8 rill Hole 3 9/ /2 Sq. r. Sockets, SE 6 Point, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /4 3 1/4 3 3/8 3 1/4 1 1/2 dditional sizes available upon request. 1 Sq. r. Universal dapters 3/4 to 1 Male Square Part Male Female Type of Overall Length Largest iameter Number Sq. In. Sq. In. Lock In. mm In. mm MF-77 3/4 1 all 4 3/ MF /32 rill Hole MF all Universal wrenches must not be used with impact drivers. Maximum operating angle is /2 Sq. r. dapters 1 Male Square Part Male Female Type of Overall Length Number Square In. Square In. Lock In. mm EX /2 9/32 rill Hole 3 15/ EX /2 all 3 15/ /2 Sq. r. Sockets, SE 6 Point, Standard Length Part Hex Overall iameter iameter Opening Number Opening Length Nose End rive End epth 6 Point In. () () () () /2 4 3/4 5 1/2 5 1/2 2 1/2 dditional sizes available upon request. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific application. Give us a call at or visit our website Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 67

76 Quality nti-mar Fastener Tools egin With Quality Fastener Tools. ushioning Effect Minimizes Side Impact amage pex µ-guard provides a protective barrier between genuine pex fastener tools and your finely finished workpiece. The free-spinning patent-pending design provides maximum protection for polished and highly sensitive surfaces. pex µ-guard covering is made of a thermo plastic urethane (TPU elastomer) which cushions against costly incidental side impacts. It offers the lowest sustained coefficient of friction for maximum tool efficiency. It is also non-removable for tamper resistance. Free-Spinning esign With pex µ-guard you get the proven pex fastener tool fit and performance plus the best protection available against marring and in-system damage. µ-guard is your guard against the potential hazards caused by rotational friction. Virtually amage Free If it doesn t say pex on the outside, how can you be sure of what s on the inside? 68

77 Why pex µ-guard nti-mar Fastener Tools re The est hoice Only high grade tool steel is used right color for ease of line-of-sight engagement Molded cover reduces envelope size for close applications Long-lasting, low durometer cover material softens impacts & resists dents Outstanding mar-resistance Precision machined sockets & extension run true overing is non-removable for tamper resistance Free-spinning design with a low sustained coefficient of drag Precision fit exceeds industry standards for extended tool and fastener life Quality pex Tools Under The over pex fastener tools are made from only tool grade steel then heat treated using our proprietary process for the proper hardness based on the application. Not too brittle to break nor too soft to wear out after one shift. Each core tool is then machined for a precision fit that exceeds industry standards. Improper fit can lead to premature fastener and fastener tool failure. pex fastener tools run true with minimal wobble for more efficient fastening cycles. The over Story low durometer cover material that resists dents during incidental side impacts. Only pex µ-guard absorbs side impacts and does not produce raised burrs when impacted. over is molded to the tool for reduced envelope dimensions yet still is able to exhibit free-spinning capability for improved ergonomics and safety. No other competitor has this capability. Some competitors even require their core tool be modified in order to assemble the cover resulting in weaker integrity and premature failure. overing is non-removable to prevent unwanted tampering on the line. Low sustained coefficient of friction between the cover and the tool yields minimal loss of tool efficiency. right color of covering makes fastener contact visually easier shift after shift and station monitoring quick and easy. Part numbers are clearly marked for ease of identification. Only pex has the manufacturing capability, inventory and global supply network to supply the global requirements of today s marketplace. 69

78 µ-guard Sockets (Includes socket and cover) rive End Fastener End Socket ssembly Part Number Socket Size Type Sex Length Size Type Sex Features* UG-10MM21 10MM21 1/4 Square F standard 10 mm Hex F FS UG-M-10MM21 M-10MM21 1/4 Square F standard 10 mm Hex F FS, M UG-M-10MM21 M-10MM21 1/4 Square F standard 10 mm Hex F FS, M, UG-10MM13 10MM13 3/8 Square F standard 10 mm Hex F FS UG-M-10MM13 M-10MM13 3/8 Square F standard 10 mm Hex F FS, M UG-10MM23 10MM23 3/8 Square F long 10 mm Hex F FS UG-M-10MM23 M-10MM23 3/8 Square F long 10 mm Hex F FS, M UG-M-10MM23 M-10MM23 3/8 Square F long 10 mm Hex F FS, M, UG-13MM23 13MM23 3/8 Square F long 13 mm Hex F FS UG-M-13MM23 M-13MM23 3/8 Square F long 13 mm Hex F FS, M UG-M-13MM23 M-13MM23 3/8 Square F long 13 mm Hex F FS, M, UG-13MM25 13MM25 1/2 Square F long 13 mm Hex F FS UG-SF-13MM25 SF-13MM25 1/2 Square F long 13 mm Hex F FS, SF UG-15MM25 15MM25 1/2 Square F long 15 mm Hex F FS UG-SF-15MM25 SF-15MM25 1/2 Square F long 15 mm Hex F FS, SF UG-18MM25 18MM25 1/2 Square F long 18 mm Hex F FS UG-SF-18MM25 SF-18MM25 1/2 Square F long 18 mm Hex F FS, SF If your tool is not shown in the table of representative products above, please contact your pex representative. µ-guard Extensions (Includes extension and cover) 70 rive End Socket End Extension ssembly Part Number Extension Size Type Sex Length Size Type Sex Features* UG-EX EX /4 Hex M 2 1/4 Square M FS UG-EX EX /4 Hex M 4 1/4 Square M FS UG-EX EX /4 Hex M 6 1/4 Square M FS UG-EX EX /4 Hex M 2 3/8 Square M FS UG-EX EX /4 Hex M 4 3/8 Square M FS UG-EX EX /4 Hex M 6 3/8 Square M FS UG-EX EX /8 Square F 3 3/8 Square M FS UG-EX EX /8 Square F 6 3/8 Square M FS UG-EX EX /8 Square F 12 3/8 Square M FS UG-EX EX /2 Square F 4 1/2 Square M FS UG-EX EX /2 Square F 8 1/2 Square M FS UG-EX EX /2 Square F 12 1/2 Square M FS If your tool is not shown in the table of representative products above, please contact your pex representative. µ-guard it Holders (Includes bit holder and cover) rive End Fastener End Holder ssembly Part Number it Holder Size Type Sex Length Size Type Sex Features* UG-M-490 M-490 1/4 Hex M 2 31/32 1/4 Hex F FS, M, ET UG-M M /4 Hex M 4 1/4 Hex F FS, M, ET UG-M M /4 Hex M 6 1/4 Hex F FS, M, ET UG /4 Square F 1 1/4 Hex F FS, ET UG-M-825 M-825 1/4 Square F 2 9/32 1/4 Hex F FS, M, ET UG /8 Square F 1 1/2 1/4 Hex F FS, ET UG-M-838 M-838 3/8 Square F 2 5/8 1/4 Hex F FS, M, ET UG /8 Square F 1 1/2 5/16 Hex F FS, ET UG-M-835 M-835 3/8 Square F 2 3/4 5/16 Hex F FS, M, ET UG /2 Square F 1 1/2 5/16 Hex F FS, ET UG-M-855 M-855 1/2 Square F 2 3/4 5/16 Hex F FS, M, ET UG-M-858 M-858 1/2 Square F 2 3/4 1/4 Hex F FS, M, ET If your tool is not shown in the table of representative products above, please contact your pex representative. *Features bbreviations FS Free Spinning Tool is able to rotate independently of over M Magnetic Tool includes magnet to hold the position of the fastener during fastening operation ET Extended Tip over extends beyond end of it Holder to shield the majority of a standard Insert it.* *it holder covers can be used with 1 or 1 1/4 long insert bits. Tip of cover can be modified by end user to suit application requirements or preference. Suggested methods of modifying covers include cutting to preferred length or heating up cover material and conforming to fastener head configuration. Notes: Reported lengths are based on uncovered tool length only for reference. over may extend beyond end of tool by 2 mm unless otherwise noted. Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

79 on t see what you need? This catalog contains 3,000+ of the most frequently requested bits, sockets and fastening accessories. Our entire active offering approaches 10,000 sellable part numbers. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific applications. This flexibility has helped make pex the only manufacturer which is a market and technology leader in all of the following industrial product categories: its & it Holders, Impact Sockets, Extensions and Universal Wrenches. Get a quote on-line fast! You can even specify custom tooling on-line fast! Specification sheets for bits, sockets, extensions and universal joints are available on-line. Just complete the appropriate easy to use form and submit your request. You ll receive a rapid response from one of our experienced staff of tooling experts. Easy to complete forms are available on-line at our website If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a non-catalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific applications. 71

80 pex overs For urable nti-mar Protection. Reduce ostly Re-Works pex Free-Spin anti-mar cover assemblies protect painted, plated, polished or critical surfaces from direct incidental contact with sockets and extensions. With pex Free-Spin covers, damage caused by marring is greatly reduced. Standard socket Heavy amage Static covered socket Light amage Low-ost urable Protection pex Free-Spin anti-mar covers are the most economical protection you can get. The durable nylon construction provides many cycles of protection, shift after shift. pex Free-Spin socket cover Virtually amage Free Popular Sizes re vailable Now! ll pex Free-Spin anti-mar cover assemblies on the adjacent charts are available for quick delivery. Simple esign Installs In Seconds! pex Free-Spin covers can be installed in seconds. No special trips to the tool crib are required. Male rive End ssembly* Female rive End ssembly *For best results, pex recommends using our optional installation tool for installing the retaining ring. See page

81 How to use the Tables below: Socket over Example You need a over that fits Socket Part # M-10MM13 1. From your pex catalog or by measuring part: rive End iameter = 19.1 mm Overall Length = 31.8 mm Hex Opening = 10 mm 2. Match your rive End iameter then Socket Length with those listed in the Free-Spin overs For Sockets table below. 3. Find over Part # where your Hex Opening fits within Min & Max Hex Size values. Use over Part # NS (shown in orange below). Socket with Extension over Example You need a over that fits Socket part # 8MM11 and Extension part # EX From your pex catalog or by measuring part: Exten. L. = 8 rive End ia. = 12.7 mm Overall L. = 25.4 mm 2. Find the group of over ssy Part #s that fit your Extension Part # from the overs For Sockets with Extensions table below. 3. Select the over ssy Part # that matches your rive End iameter and Socket Length. 4. Replace the XX in the over ssy. Part # with your 2-digit Extension Length (available lengths are listed under Extension Length ). Use over ssy. Part # NE08F-S (shown in orange below). Free-Spin overs For Sockets Fits Hex Socket with these Outer imensions** rive End Socket Min Hex Max Hex over iameter Length Size* Size* Part Number (inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm) 1/4 rive NS NS NS /4 NS /4 9/32 NS E /16 5/16 NS E-4 E-5 NS E-6 E-6 NS /32 E-8 NS /32 NS /16 1/4 NS /32 NS / NS / NS /8 7/16 NS /16 3/8 rive NS /16 NS /16 NS NS / NS NS NS / NS /32 9/32 NS / NS /32 9/16 NS /32 Fits Hex Socket with these Outer imensions** rive End Socket Min Hex Max Hex over iameter Length Size* Size* Part Number (inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm) NS /8 NS /2 NS / NS /16 NS /2 15 NS /2 9/16 NS / NS NS /2 rive NS /4 11/32 NS / NS /16 NS / NS / NS /16 NS NS / NS NS NS /16 NS E-10 E-12 NS E-14 E-16 NS /8 5/8 NS /2 18 NS / NS / NS /4 * E designation (i.e. E-8) stands for the point size of a Torx socket ** Socket must have a ring groove. Sockets that do not have ring grooves are noted as such in the catalog. 1 Straight socket (ie. Non-tapered.) Free-Spin over ssemblies For Sockets with Extensions Fits any socket with these 2 outer dimensions Socket rive Socket over ssembly End iameter Overall Length Part Number Extension Part Number rive Size Ext. Type Extension Length ()* (inch) (mm) (inch) (mm) NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or * XX suffix on Extension P/N is a whole number indicating the length in of the extension. In some cases this designation is left off of the end of the extension P/N indicating that it is the shortest length capable of being manufactured. For Extension lengths shorter than those listed, a Socket Only cover would be used. (ontinued on next page) Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 73

82 overs For Sockets with Extensions (continued) Fits any socket with these 2 outer dimensions Socket rive Socket over ssembly End iameter Overall Length Part Number Extension Part Number rive Size Ext. Type Extension Length ()* (inch) (mm) (inch) (mm) NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXM-S EX-250-XX or EX-250--XX 1/4 Male XX = 3, 4, 6, 8 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEXXF-S EX-255-XX or EX-255--XX 1/4 Female XX = 2, 3, 4, 6, 8, 10 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEJXXM-S EX-370-XX or EX-370--XX 1/4 Male XX = 4, 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEKXXM-S EX-371-XX or EX-371--XX 7/16 Male XX = 6, 8 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEMXXF-S EX-376-XX or EX-376--XX 3/8 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or NEUXXF-S EX-508-XX or EX-508--XX 1/2 Female XX = 3, 4, 5, 6, 8, 10, 12, 15 or * XX suffix on Extension P/N is a whole number indicating the length in of the extension. In some cases this designation is left off of the end of the extension P/N indicating that it is the shortest length capable of being manufactured. For Extension lengths shorter than those listed, a Socket Only cover would be used. Free-Spin over Installation Tool Installation tool ensures proper positioning of the retaining ring on extensions with male drive end. Part Number Used on overs with Part # Prefix NE, NEJ, NEK 74 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

83 on t see what you need? This catalog contains 3,000+ of the most frequently requested bits, sockets and fastening accessories. Our entire active offering approaches 10,000 sellable part numbers. If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a noncatalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific applications. This flexibility has helped make pex the only manufacturer which is a market and technology leader in all of the following industrial product categories: its & it Holders, Impact Sockets, Extensions and Universal Wrenches. Get a quote on-line fast! You can even specify custom tooling on-line fast! Specification sheets for bits, sockets, extensions and universal joints are available on-line. Just complete the appropriate easy to use form and submit your request. You ll receive a rapid response from one of our experienced staff of tooling experts. Easy to complete forms are available on-line at our website If the tool you need does not appear in this catalog, give us a call. The odds are, we may have what you need as a non-catalog item. If not, our experienced staff of tooling experts can design and manufacture specials to meet the needs of your specific applications. 75

84 pex Has Wide Selection Of ustom esigned nti-mar overs Over Half entury Of Quality In Every esign For many years pex has been producing protective covers for our quality products. Each was custom designed by our staff of engineers to work in a specific application. Over time we have developed a vast library of designs that work not only for their original applications but may also be a solution for one of your applications. Our covered product designs include sockets, sockets and extensions, bits and bit holders, nutsetters and many more. Each design was developed with one or more of the following unique features and capabilities: Free-spinning covers which allow the tool to rotate independently of the cover for improved protection of sensitive surfaces. Spring-loaded covers which retract when engaging the fastener. Embedded magnets in covers increase holding force on fastener. Single-piece construction to reduce material interfaces. Press fit/non-free-spinning for reduced envelope size in tight clearance applications. 76 pex recognizes the need in assembly operations for the protection of painted or finished surfaces. We can coat just about any pex bit or socket with a protective nylon sleeve. Shown above are some recently manufactured solutions with a brief description of the application. 1. Pick-up Truck Tailgate to ed Torx T-50 it with magnets within the sleeve to secure fastener. WJ-1506-T50 2. Sun Visor Installation Phillips bit used with magnetic bit holder. Nylon sleeve reduces headliner and visor damage. S Lug Nut ssembly Magnetic 19MM socket has nylon coating to protect chrome plated and polished aluminum wheels. HGSFN ntenna river Four-prong antenna bezel nutdriver with nylon sleeve to reduce damage to painted surface. ZN-30, Spare Tire Wing Nut ssembly ll nylon socket to install low torque wing nut. WJ Painted oor ssembly Only the nutsetter spins within the nylon sleeve, eliminating any mark on surface around the fastener. Nylon sleeve also protects adjacent painted door surface. MN6N-08-10M-4

85 How to use this guide: 1. Scan the desired category of product for ssembly Part Numbers that meet your criteria using chart to explain abbreviations. 2. ontact your local pex representative to confirm suitability and provide pricing. 3. Fill out either the it Worksheet or the Socket Quotation Worksheet located in the back of this brochure and fax to your local pex representative, if your requirements dictate a product not found in the tables that follow. *Features bbreviations olt learance M onut Magnet E Extension over Only EM Embedded Magnets ER Embedded Rare Earth Magnets ET Exposed Tip FL Fast Lead FS Free Spinning FT Flush to Tip L Limited learance M Magnetic P Pinned P Partially overed PF Press Fit R Rare Earth Magnet RE Retractable / Finder Sleeve RNT Removable Nylon Tip RT Recessed Tip S Shallow roach overed Power it omplete ssemblies (Includes Tool and nti-mar over) omplete ssembly it over Ordering Number Type rive Size Pt. Size Length (in.) Features* S-5211 Phillips 1/ /16 ET PF S Phillips 1/ RE RT RNT S-5349 Phillips 1/ RE RT (for 0.41" dia fastener head) S-5346-K Torx 7/ RE RT (for 0.56" dia fastener head) S-5346-N Torx 7/ RE RT (for 0.66" dia fastener head) S-5370 Torx 7/ PF RT (for 1.12" dia fastener head) S-5362 Hex 1/4 5 mm 4 PF R S Hex 1/4 5 mm 6 PF RT SF Surface rive SM Strip Magnet T Turned O U Universal (Swivel) overed Insert it & it Holder omplete ssemblies (Includes Tool and nti-mar over) omplete ssembly Holder it over Ordering Number rive Size rive Type Sex Length (in.) Features* Type rive Size Pt. Size Length (in.) Features* Features* S /4 Hex M 2 31/32 M Phillips 1/4 1 1 L EM FS RT S /4 Hex M 6 M Torx 1/ EM FS RT S-5346-O 1/4 Hex M 2 31/32 M Torx 1/ RE FS RT overed Nutsetter omplete ssemblies (Includes Tool and nti-mar over) Nutsetter omplete ssembly rive rive Opening Opening Length over Ordering Number Size Type Size Type (in.) Features* Features* MN6N-08-10M-4 1/4 Hex 8 mm Hex 4 M FS FT MN6N-08-10M-6 1/4 Hex 8 mm Hex 6 M FS FT SMN M-4 1/4 Hex 8 mm Hex 4 SM FS FT SMN M-6 1/4 Hex 8 mm Hex 6 SM FS FT SMN M-9 1/4 Hex 8 mm Hex 9 SM FS FT VMN-56-10MM 1/4 Hex 10 mm Hex 2.54 RT PF overed Socket omplete ssemblies (Includes Tool and nti-mar over) Socket omplete ssembly rive rive Opening Opening Length over Ordering Number Size Type Size** Type (in.) Features* Features* MRN-5.5MME1 1/4 Square 5.5 Hex M R FT PF MRN-7MME1 1/4 Square 7 Hex M R FT PF RMN-7MM21 1/4 Square 7 Hex 1.75 R FT PF RMN-10MM21 1/4 Square 10 Hex 1.75 R FT PF MN-10MM11 1/4 Square 10 Hex 1 M FT PF VN MM 1/4 Square 10 Hex 1.75 M FT PF MRHN /8 Square 3/8 Hex 1.25 M R T RT PF P HN /8 Square 3/8 Hex 1.5 T S FT PF P HN /8 Square 7/16 Hex 1.5 T S FT PF P HN /8 Square 7/16 Hex 1.5 T FT PF P HN /8 Square 9/16 Hex 3.5 FT PF P ZN-30 3/8 Square 3/4 ezel lugs ET PF P HN /8 Square 3/4 bl. Hex 0.89 stepped FT PF P ZN-31 3/8 Square 69/94 ezel lugs ET PF P HN /8 Square 15/16 bl. Hex 1.25 stepped FT PF P MVN-53-7MM 3/8 Square 7 Hex 2 M FT PF ontinued on next page. **Fractions represent. Integers represent metric (mm). 77

86 *Features bbreviations olt learance M onut Magnet E Extension over Only EM Embedded Magnets ER Embedded Rare Earth Magnets ET Exposed Tip FL Fast Lead FS Free Spinning FT Flush to Tip L Limited learance M Magnetic P Pinned P Partially overed PF Press Fit R Rare Earth Magnet RE Retractable / Finder Sleeve RNT Removable Nylon Tip RT Recessed Tip S Shallow roach SF Surface rive SM Strip Magnet T Turned O U Universal (Swivel) overed Socket with Extension omplete ssemblies (Includes Tool and nti-mar over) Socket omplete ssembly rive rive Opening Opening Length over Ordering Number Size Type Size** Type (in.) Features* Features* MN-8MM23 3/8 Square 8 Hex 2 M RT PF P MVN MM 3/8 Square 10 Hex 2 M RT PF P MVN MM 3/8 Square 10 Hex 2 M T FT PF P MVN MM 3/8 Square 10 Hex 2 M T RT PF P MVN MM 3/8 Square 10 Hex 2 M T FT PF P MVN MM 3/8 Square 10 Hex 2 M RT PF P MVN MM 3/8 Square 10 Hex 2 M FT PF RMN-10MM23 3/8 Square 10 Hex 2 R FT PF VN MM 3/8 Square 10 Hex 1.25 RT PF VN MM 3/8 Square 10 Hex 1.25 T RT PF P VSFN MM 3/8 Square 10 Hex 3.5 SF T FT PF VN MM- 3/8 Square 10 bl. Hex 1.25 RT PF P VN MM- 3/8 Square 10 bl. Hex 2 RT PF P MV MM 3/8 Square 13 Hex 1.5 M SF RT PF P VN MM 3/8 Square 13 Hex 1.5 RT PF MVN MM 3/8 Square 13 Hex 2 M RT PF P VN MM 3/8 Square 13 Hex 3.5 RT PF P VSFN MM 3/8 Square 13 Hex 2.6 SF RT PF P VN-69-24MM 3/8 Square 24 Hex 1.5 RT PF P MVEN MM 1/2 Square 13 Hex 2.25 M FT PF MN-17MM55 1/2 Square 17 Hex 3.25 M FT PF SMVEN MM 1/2 Square 18 Hex 1.5 SM FT PF VESFN MM 1/2 Square 19 Hex 3.25 SF FT PF VESFN MM 1/2 Square 21 Hex 1.5 SF FT PF HFSF /8 Square 3/4 Hex SF RT PF P VFSFN MM 5/8 Square 19 Hex SF T RT PF P MVFN MM 5/8 Square 19 Hex 3.5 M SF T RT PF P VFSFN MM 5/8 Square 19 Hex 3.5 SF T RT PF P VFSFN MM 5/8 Square 19 Hex 3.5 SF T RT PF P VFSFN MM 5/8 Square 19 Hex 3.5 SF T RT PF P VFSFN MM 5/8 Square 19 Hex 3.5 SF T RT PF P MVFN-99-19MM 5/8 Square 19 Hex RT PF P ER MRVFSFN MM 5/8 Square 19 Hex 3.75 M R SF T RT PF P MRVFN MM 5/8 Square 19 Hex 4.5 M R RT PF P MRVFSFN MM 5/8 Square 19 Hex 4.5 M R SF RT PF P RMRVFN MM 5/8 Square 19 Hex 4.5 M R RT PF P MRMVFSFN-20-21MM 5/8 Square 21 Hex 3 M R SF RT PF P MRVFSFN-18-21MM 5/8 Square 21 Hex 3 M R SF RT PF P RMVFSFN-18-21MM 5/8 Square 21 Hex 3 M R SF RT PF P HGSF /4 Square 3/4 Hex SF RT PF P HGSFN /4 Square 3/4 Hex 4 SF RT PF P MHGN /4 Square 3/4 Hex 4 M T RT PF P HGSFN /4 Square 7/8 Hex 4 SF RT PF P VGN MM 3/4 Square 17 Hex T RT PF P VGN MM 3/4 Square 17 Hex 3.25 T RT PF P VGSFN MM 3/4 Square 17 Hex 4 SF T RT PF P VGN-28-19MM 3/4 Square 19 Hex T RT PF P VGSFN-34-19MM 3/4 Square 19 Hex 3.25 SF T RT PF P VGSFN-56-21MM 3/4 Square 21 Hex 4 SF T RT PF P RMVGSFN-53-21MM 3/4 Square 21 Hex 4.5 M R SF RT PF P VGSFN-55-21MM 3/4 Square 21 Hex 6 SF RT PF VGFLN-40-22MM 3/4 Square 22 Hex 2.5 FL RT PF P VGSFN-40-22MM 3/4 Square 22 Hex 2.5 SF RT PF P MRVGN-34-22MM 3/4 Square 22 Hex 4 M R RT PF P RMRVGSFN-38-22MM 3/4 Square 22 Hex 4 M R SF RT PF P VGSFN-39-22MM 3/4 Square 22 Hex 4 SF T RT PF P 78 ontinued on next page.

87 *Features bbreviations olt learance M onut Magnet E Extension over Only EM Embedded Magnets ER Embedded Rare Earth Magnets ET Exposed Tip FL Fast Lead FS Free Spinning FT Flush to Tip L Limited learance M Magnetic P Pinned P Partially overed PF Press Fit R Rare Earth Magnet RE Retractable / Finder Sleeve RNT Removable Nylon Tip RT Recessed Tip S Shallow roach SF Surface rive SM Strip Magnet T Turned O U Universal (Swivel) overed Socket omplete ssemblies continued (Includes Tool and nti-mar over) omplete ssembly Extension Socket over Ordering Number rive Size rive Type Sex Length (in.) Opening Size Opening Type Length (in.) Features* Features* MVN-85-8MM 1/4 Square F 3 8 Hex 1.75 M FS MVMN-8-7MM 1/4 Hex M 6 7 Hex M FS MRVMN-9-7MM 1/4 Hex M 8 7 Hex R FS MVMN-9-7MM 1/4 Hex M 8 7 Hex M FS MVMN-61-10MM 1/4 Hex M Hex 1.25 M FS MRSFVMN-58-10MM 1/4 Hex M 3 10 Hex 1.75 R SF FS MVMSFN-62-10MM 1/4 Hex M 4 10 Hex 1.75 M SF FS MVMN-63-10MM 1/4 Hex M 6 10 Hex 1.75 M FS MVMN-65-10MM 1/4 Hex M 6 10 Hex 2 M FS MVMN-60-10MM 1/4 Hex M 6 10 Hex 1 M FS MVMSFN-60-10MM 1/4 Hex M 6 10 Hex 1 M SF FS SMVMN-65-10MM 1/4 Hex M 6 10 Hex 2 SM FS VMN-70-10MM 1/4 Hex M 6 10 Hex 1.75 FS MVMN-64-10MM 1/4 Hex M 8 10 Hex 1.75 M FS VMN-6-13MM 1/4 Hex M Hex 2 FS MVMN-5-13MM 1/4 Hex M 2 13 Hex 3.5 M FS MVMN-1-15MM 1/4 Hex M Hex 2 M FS VMN-2-15MM 1/4 Hex M Hex 2 FS VMN-1-16MM 1/4 Hex M Hex 2 FS VMN-2-19MM 1/4 Hex M Hex 2 FS VMN-1-21MM 1/4 Hex M 2 21 Hex 1.5 FS VN-248-8MM 3/8 Square F 3 8 Hex 1.25 M FS MVN MM 3/8 Square F 2 10 Hex 1.25 M FS MVN MM 3/8 Square F 3 10 Hex 2 M FS MRSFVN741-10M-NU 3/8 Square F 3 10 Hex 1.75 R SF FS MRVSFN MM 3/8 Square F 3 10 Hex 2 R SF FS MVN MM 3/8 Square F 3 10 Hex 1.25 M FS MVN MM 3/8 Square F 3 10 Hex 1.25 M FS VN MM 3/8 Square F 3 10 Hex 1.25 FS MVN MM 3/8 Square F 4 10 Hex 3.5 M FS MVN MM 3/8 Square F 4 10 Hex 2 M FS MVN MM 3/8 Square F 4 10 Hex 1.25 M FS MVN MM 3/8 Square F 4 10 Hex 1.25 M FS VN MM 3/8 Square F 4 10 Hex M FS RMVN MM 3/8 Square F 5 10 Hex 2 R FS MVN MM 3/8 Square F 6 10 Hex 1.25 M FS MVN MM-N 3/8 Square F 6 10 Hex 1.25 M FS MVN MM-NU 3/8 Square F 6 10 Hex 1.25 M FS MVN MM 3/8 Square F 6 10 Hex 1.25 M FS SMVN MM 3/8 Square F 6 10 Hex 2 SM FS MVN MM 3/8 Square F 8 10 Hex 3.5 M FS MVN MM 3/8 Square F 8 10 Hex 1.25 M FS MVN MM 3/8 Square F Hex M FS RMVN MM 3/8 Square F Hex 2 R FS MVN MM 3/8 Square F Hex 3.5 M FS MVN MM 3/8 Square F Hex 2 M FS SMVN MM 3/8 Square F Hex 2 SM FS VN MM 3/8 Square F Hex 1.25 FS MSFVN MM 3/8 Square F Hex 2 M SF FS MVN MM 3/8 Square F 2 13 Hex 3.5 M FS MVN MM 3/8 Square F 3 13 Hex 3.5 M FS MVN MM 3/8 Square F 3 13 Hex 1.5 M FS SMVSFNNU M 3/8 Square F 3 13 Hex 1.5 RE SM SF FS MVN MM 3/8 Square F 4 13 Hex 2 M FS MVN MM 3/8 Square F 6 13 Hex 3.5 M FS MRVN MM-NU 3/8 Square F 6 13 Hex 1.5 R FS MRVN MM-N 3/8 Square F 6 13 Hex 1.5 R FS MSFVN MM 3/8 Square F 6 13 Hex 2 M SF FS **Fractions represent. Integers represent metric (mm). 79

88 *Features bbreviations olt learance M onut Magnet E Extension over Only EM Embedded Magnets ER Embedded Rare Earth Magnets ET Exposed Tip FL Fast Lead FS Free Spinning FT Flush to Tip L Limited learance M Magnetic P Pinned P Partially overed PF Press Fit R Rare Earth Magnet RE Retractable / Finder Sleeve RNT Removable Nylon Tip RT Recessed Tip S Shallow roach SF Surface rive SM Strip Magnet T Turned O U Universal (Swivel) overed Socket with Extension omplete ssemblies continued (Includes Tool and nti-mar over) omplete ssembly Extension Socket over Ordering Number rive Size rive Type Sex Length (in.) Opening Size Opening Type Length (in.) Features* Features* MVN MM 3/8 Square F 6 13 Hex 2 M FS MVNNU MM 3/8 Square F 6 13 Hex 1.5 M FS MVN MM 3/8 Square F 8 13 Hex 2 M FS SMSFVN637-13M-NU 3/8 Square F 8 13 Hex 2 SM SF FS MVN MM 3/8 Square F Hex 2 M FS MVN MM 3/8 Square F Hex 1.5 M FS MVN MM 3/8 Square F Hex 2 M FS MVN MM 3/8 Square F Hex 1.5 M FS VN MM 3/8 Square F Hex 2 FS VN MM 3/8 Square F Hex 2 FS MVN MM 3/8 Square F 6 15 Hex 2 M FS VSFN MM-N 3/8 Square F Hex 1.5 SF FS MVSFN MM 7/16 Square F 3 13 Hex 1 M SF RE MVNN-1-13MM 7/16 Hex M 8 13 Hex 2 M FS MRVNN-1-15MM 7/16 Hex M 6 15 Hex 3.25 R FS MVEN-1-7MM 1/2 Square F Hex 1.25 M FS MVEN MM 1/2 Square F Hex 1.25 M FS MRVEN MM 1/2 Square F 8 18 Hex 2.25 R FS MRVEN MM 1/2 Square F Hex 1.5 R SF FS overed Socket with Extension & dapter omplete ssemblies (Includes Tool and nti-mar over) dapter Extension Socket omplete ssembly rive rive Length rive rive Length Opening Opening Length dapter Socket over Ordering Number Size Type Sex (in.) Size Type Sex (in.) Size** Type (in.) Features* Features* Features* MRVN-97-7MM 1/4 Square F 1.5 1/4 Hex M 6 7 Hex QR R FS MVN MM 3/8 Square F /4 Hex M 6 10 Hex 1 QR M FS MVN MM 3/8 Square F 2 7/16 Hex M 8 10 Hex 2 QR, M FS MVN MM 3/8 Square F 2 7/16 Hex M 8 10 Hex 1.25 QR M FS VN MM 3/8 Square F 2 7/16 Hex M 8 10 Hex 1.25 QR FS RSFN /8 Square F 1.5 1/4 Hex M 9 7/16 Hex P U, SF E, FS RMSFN /4 Hex M 9 7/16 Hex P U, SF E, FS RN /8 Square F 1.5 1/4 Hex M 9 1/2 Hex 1 P U E, FS RSFN /8 Square F 1.5 1/4 Hex M 9 1/2 Hex P U, SF E, FS **Fractions represent. Integers represent metric (mm). If you have an assembly application that requires special protection, simply fill out the appropriate attached Quotation Worksheet and fax it to your pex Representative. Indicate that a nylon coating is needed. Or, you can visit our website at and submit a Quotation Worksheet electronically. Either way, a quote will be generated promptly. If you need more information or would like to have an pex Representative contact you, please call ustomer Service toll free at

89 Solutions oes pex offer sockets for the installation of grease fittings? Specially designed pex sockets are the easy way to install or remove grease fittings. (See page 83) What s the real advantage of using socket adapters? Socket adapters are an easy and economical solution for applications that require several different nut sizes. (See page 85) oes pex offer tap holding sockets? pex offers a wide variety of tap holding adapters. These adapters allow you to easily convert your power tool into a tap drill. (See page 83) What s the advantage of a male hex drive socket? male hex drive socket lets you quickly accommodate a different nut size without pulling the primary socket off the power tool. (See page 85) 81

90 Reversible Sockets for SE Hex Head Sheet Metal Screws Standard Part Number Hex Size Overall Length Outside iameter Roll Pin Part Number SW-350 1/4 9/16 3/8 21-S SH /16 3/4 13/16 21-S Magnetic Part Number Hex Size Overall Length Outside iameter Spring Pin Part Number MSW-350 1/4 31/32 3/8 21-S MSW-90 1/4 31/32 7/16 21-S MSW-90-* 1/4 31/32 7/16 21-S MSW-984 5/16 31/32 9/16 21-S MSW-984-* 5/16 31/32 9/16 21-S MSH-400 3/8 1 1/8 11/16 21-S *Tapered Ends Shanks for Reversible Sockets Male Hex Male Overall Part Number Power rive Hex Size Length SH-629 1/4 1/4 2 SH-629-P 1/4 1/4 2 Pin Lock SH /4 1/4 5 SH /4 1/4 6 SH-57 1/4 1/4 2 Full Length Hex SH /4 1/4 3 Full Length Hex SH /4 1/4 4 Full Length Hex SH /4 1/4 6 Full Length Hex SH /4 1/4 8 Full Length Hex SH-59 1/4 5/16 2 SH /4 5/16 3 SH /4 5/16 4 SH /4 5/16 6 SH-412 1/4 3/8 2 SH-414 1/4 1/2 2 SH-404 7/16 3/8 2 Valve Stem rivers 1/4 Male Hex rive Part Slot Overall Length ody iameter Number Size In. mm In. mm S S Tap Holding Sockets Male Hex rive, SE (Tap not included) Tap Male Socket Length Socket iameter Part Number Size Hex In. mm In. mm SJ-935-1/4 1/4 7/16 15/ /8 16 SJ-935-5/16 5/16 1/2 15/ /8 16 SJ-935-3/8 FS 3/8 9/ /32 17 SJ-935-7/16 7/16 5/ /4 19 SJ-935-1/2 1/2 3/4 1 1/4 32 7/8 22 Male Hex rive, Metric Tap Male Socket Length Socket iameter Part Number Size Hex In. mm In. mm SJ MXM6 M / /8 16 SJ MXM8 M / /8 16 SJ MXM10 M /32 17 SJ MXM8 M /16 21 SJ MXM12 M /16 21 Female Sq. r., SE (Tap not included) Tap Female Socket Length Socket iameter Part Number Size Square In. mm In. mm H #10 3/8 1 1/2 38 3/4 19 H-100-1/4 1/4 3/8 1 1/2 38 3/4 19 H-100-5/16 5/16 3/8 1 1/2 38 3/4 19 H-100-3/8 FS 3/8 3/8 1 1/2 38 3/4 19 H-100-7/16 7/16 3/8 1 1/2 38 3/4 19 H-100-1/2 1/2 3/8 1 1/2 38 3/4 19 H-100-5/8 5/8 3/8 1 3/ H-100-3/4 3/4 3/ HE-100-1/4 1/4 1/2 1 1/2 38 7/8 22 HE-100-5/16 5/16 1/2 1 1/2 38 7/8 22 HE-100-3/8 FS 3/8 1/2 1 1/2 38 7/8 22 HE-100-7/16 7/16 1/2 1 1/2 38 7/8 22 HE-100-1/2 1/2 1/2 1 5/8 41 7/8 22 HE-100-5/8 5/8 1/2 1 3/ HE-100-3/4 3/4 1/ Ferry ap 3/8 Square rive Sockets Part Head Overall Length Nose iameter rive iameter Number Size In. mm In. mm In. mm F-310 5/16 1 1/ / / F-312 3/8 1 1/ / / Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

91 Grease Fitting Sockets For ngled Grease Fittings, eep and Shallow roach epth Overall roach Magnet Part Number Hex Square Length epth epth 6 Point Magnetic Size rive In. mm In. mm In. mm #5 (1 5/8 ) Spline rive Extensions Overall Length Part Number In. mm escription EXL Female spline to male spline ZN-112-3/8 1/4 1 1/4 32 9/ ZN-312 MZN-312 3/8 3/8 1 1/2 38 9/ /32 6 ZN-512-3/8 1/2 1 1/2 32 9/ ZN-114-7/16 1/4 1 1/4 32 7/ ZN-314 MZN-314 7/16 3/8 1 1/2 38 7/ /16 11 ZN-514 MZN-514 7/16 1/2 1 1/2 38 7/ /16 11 ZE-112-3/8 1/4 1 1/4 32 1/ ZE-314-7/16 3/8 1 1/2 38 3/ ZE-514-7/16 1/2 1 1/2 38 3/ dapters Part Number EXL-1000 EXL-1100 escription Female spline to 1 male square Female spline to 1 1/2 male square For Straight Grease Fittings Overall roach Magnet Part Number Hex Square Length epth epth 6 Point Magnetic Size rive In. mm In. mm In. mm Z-110 MZ-110 5/16 1/ /8 3 21/64 8 Z-310 MZ-310 5/16 3/8 1 1/4 32 1/8 3 21/64 8 Z-510 MZ-510 5/16 1/2 1 1/2 38 1/8 3 19/64 7 Z-512-3/8 1/2 1 1/2 38 1/ Z-314 MZ-314 7/16 3/8 1 1/4 32 3/ /64 9 Z-514 MZ-514 7/16 1/2 1 1/2 38 3/16 5 3/8 10 rill Holders 1/4 Male Hex rive Part rill Overall Length ody iameter Number Size In. mm In. mm WJ-284-7/64 7/64 2 5/8 67 1/2 13 WJ-284-1/8 1/8 2 5/8 67 5/8 16 WJ-284-9/64 9/64 2 5/8 67 5/8 16 WJ-284-5/32 5/32 2 5/8 67 3/4 19 WJ-284-3/16 3/16 2 5/8 67 3/4 19 WJ-284-1/4 1/4 2 5/8 67 3/4 19 WJ-284-5/16 5/16 2 5/8 67 3/4 19 WJ-284-3/8 3/8 2 5/ Universal Wrenches Part Number MFL-250 MFL-1000 escription Female spline to male spline (heavy duty) Female spline to 1 male square Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. #5 (1 5/8 ) Spline rive udd Wheel Sockets ombo. 13/16 Square 1 1/2 Hex Part Overall Length Number rive In. mm HT-848 #5 Spline 4 1/ /16 Male Hex rive Part rill Overall Length ody iameter Number Size In. mm In. mm WJ /64 13/64 2 3/8 60 3/4 19 WJ-265-3/16 3/16 2 3/8 60 3/4 19 WJ-265-1/4 1/4 2 3/8 60 3/4 19 WJ-265-7/16 7/16 2 3/ WJ-265-3/8 3/8 2 3/ WJ /32 17/32 2 3/ /8 29 WJ-265-1/2 1/2 2 3/ /8 29 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 83

92 Socket Retaining Rings Plastic Ring With Steel Insert Metal Ring Part Inside iameter Number rive In. mm 10005S 3/4 Square 1 1/ S 3/4 Square 1 7/ S 3/4 Square 1 5/ S 1 Square 1 3/ S 1 Square S 1 Square 2 1/ S 1 Square 2 1/ S 1 Square 2 1/ S 1 Square 2 5/ S 1 1/2 Square 2 7/ S 1 1/2 Square 3 3/ Part Inside iameter Number rive In. mm MET /8 Square MET /8 Square MET /2 Square MET /2 Square MET /4 Square MET Square dapters #130- Yankee rive for Spiral Type river Part Male Square Overall Length Shank iameter Number In. In. mm In. mm YK-250 1/4 1 15/ YK-370 3/8 2 3/ YK-500 1/2 2 5/ #131- Yankee rive for Spiral Type river Part Male Square Overall Length Shank iameter Number In. In. mm In. mm YK-501 1/2 2 5/ #135- Yankee rive for Spiral Type river Part Male Square Overall Length Shank iameter Number In. In. mm In. mm YK-252 1/4 1 15/ YK-372 3/8 2 3/ YK-502 1/2 2 5/ Female Threaded dapters Part Female Male Square Type of Number Thread In. Lock TH-257 3/8-24 1/4 Pin TH-377 3/8-24 3/8 Pin TH-501 3/8-24 1/2 Pin TH-378 1/2-20 3/8 Pin TH-502 1/2-20 1/2 Pin Male Threaded dapters Part Male Hex Number Thread rive TM-24 3/8-24 1/4 TN-24 3/8-24 7/16 TM-20 1/2-20 1/4 TN-20 1/2-20 7/16 84 Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items.

93 dapters Socket & Ratchet Wrench dapters, SE Part Male Square Male Hex Overall Length Number In. In. In /4 1/4 25/ /4 5/16 25/ /4 3/8 25/ /4 7/16 25/ /4 1/2 25/ /4 9/16 25/ /4 5/8 25/ /8 3/8 1 1/ /8 7/16 1 1/ /8 1/2 1 5/ /8 9/16 1 5/ /8 5/8 1 5/ /8 11/16 1 5/ /8 3/4 1 5/ /8 7/8 1 5/ /2 3/8 1 3/ /2 7/16 1 3/ /2 1/2 1 3/ /2 9/16 1 3/ /2 5/8 1 1/ /2 11/16 1 1/ /2 3/4 1 1/ /2 13/16 1 1/ /2 7/8 1 1/ /2 15/16 1 1/ /2 1 1/16 1 1/ /2 1 1/8 1 1/ /2 1 3/16 1 1/ /2 1 1/4 1 1/8 Socket & Ratchet Wrench dapters, Metric Part Male Square Male Hex Overall Length Number In. mm In. mm -1-6mm 1/4 6 25/ mm 1/4 7 25/ mm 1/4 8 25/ mm 1/4 9 25/ mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 3/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ / mm 1/ /8 29 Sockets with Male Hex Part Female Square Male Hex Overall Length Number In. In. In. mm SJ-375 5/16 3/8 13/16 21 SJ-379 1/2 3/ SJ-380 9/16 3/ SJ-349 3/8 7/16 15/16 24 SJ-350 7/16 7/16 15/16 24 SJ-351 1/2 7/ SJ-352 9/16 7/ SJ-360 3/8 1/2 15/16 24 SJ-361 7/16 1/2 15/16 24 SJ-241 1/2 1/ SJ-362 9/16 1/ SJ /16 1/2 1 3/16 30 SJ-55 7/16 9/16 15/16 24 SJ-66 1/2 9/ SJ-67 9/16 9/ SJ-68 5/8 9/16 1 1/8 28 Hex rive Universal dapters (Tension Type Shown) Male Hex to Male Square Extension Overall Largest Part Number Male Male Type of Length iameter Standard Tension Sq. In. Hex In. Lock In. mm In. mm - KSM /4 1/4 Pin / KM KSM /4 1/4 all / KM-37-6 KSM /8 1/4 Pin / KSM /8 1/4 all / Universal wrenches must not be used with impact drivers. Maximum operating angle is 30. Standard lengths are 3, 6, 9 and 12 (76, 152, 229 and 305mm). Indicates a commonly requested item that is either in stock or has a max typical leadtime of 2 weeks from the factory. No minimum on these items. 85

94 Screwdriver it Quotation Worksheet For quotation only. Not an order. Name Title ompany ddress ITY STTE ZIP Phone FX Style Point Size Style Point Size Style Point Size Style Point Size Phillips Torx Frearson/Reed Prince Torx-Set Phillips R Torx Plus Socket Head Triple Square Sloted rive Type Hex Insert Hex Power Pozidriv Square Recess Size Nylon overs Requirements: omponents To e overed over Features it only Flush with tip of bit Tri-Wing Other Threaded Female Square Other imensions it and it Holder Exposed tip of bit Retractable Embedded magnets Press fit Free-spinning (able to spin independently of part being covered) O.. limitations (must specify) Other considerations (must specify). Overall Length. ody. Turned iameter Length it Holder Styles For Hex Insert its Magnetic O-Ring Retention Standard (Retaining Groove) Quick Release Other Quantity pplied or riving Torque it Holder rive Types Hex rive Female Square Other dditional Specifications Size 86 Fill out and Fax to your pex representative. For assistance, please call your pex representative.

95 Sockets Quotation Worksheet For quotation only. Not an order. Name Title ompany ddress ITY STTE ZIP Phone FX Socket Type imensions Type (tapered) Type (straight) Type (shouldered). Square drive roach Opening. rive end diameter. Overall length Hex ouble Square Torx. Taper or shoulder length ouble Hex Fast Lead Other E. olt clearance depth Square Surface rive F. roach depth Magnetic rive onfiguration G. Nose end diameter Magnetic olt learance (M) IN Standard H. roach opening Magnetic olt learance, No IN groove with retaining ring (RM) ross Hole (one wall only) I. Torx size Strip Magnet (SM) Fixed Magnet (M) Non-magnetic Nylon overs Requirements: Extensions Hex rive Female Square Other Size omponents To e overed Socket only Socket and Extension over Features Exposed tip of socket hex Recessed tip of socket hex Flush tip of socket hex Extension Length No extension required dditional Specifications Press fit Free-spinning (able to spin independently of part being covered) Quantity pplied or riving Torque O.. limitations (must specify) Other considerations (must specify) Fill out and Fax to your pex representative. For assistance, please call your pex representative. 87

96 Universal Wrench Quotation Worksheet For quotation only. Not an order. Name Title ompany ddress ITY STTE ZIP Phone FX imensions Female square drive, standard type Female square drive, tension type Square rive size Square rive size Male hex drive, standard type Male hex drive, tension type Hex rive size Female square drive, (short) Hex rive size. Socket length. Socket diameter*. Socket nose dia. G. epth of learance L. Shank length M. Overall length Square rive size *Standard diameters are 5/8, 3/4, 7/8, 1, 11/4, 1 1/2, 1 3/4, 2 roach Opening Style & Size Hex ouble Hex Quantity Male square dditional Specifications Pin lock all lock { Hole pplied or riving Torque 88 Fill out and Fax to your pex representative. For assistance, please call your pex representative. Universal wrenches are not recommended for impact applications. Maximum operating angle 30.

97 89 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page E E E E S S S S S S S S S S X X X X X X X MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MME MME MM MM MM MM MM MM MM MM MM MM MM MM MM MME MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MME MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MME MME MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM P P MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MME MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM / / / /4-R / R / / / / / / /16-R / / R / / R / MM MM MM MM MM MM MM MM MM MM MM MM MM MM X X X MM MM X XX MM MM X MM X X MM X MM X MM X MM X MM X MM X MM MM MM MM MM MM MM MM MM MM MM MM X X X X X

98 90 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page X X X X X X X MM MM MM MM MM MM MM MM MM MM MM MM MM E P P P P P P P MM MM MM / / /4-R / / /16-R MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM it Kit MM MM MM MM MM MM MM MM MM MM MM MM MM MM / / / / / / MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MME X X X X X X X X X MM MM MM MM MM MM MM MM MM MM MM X MM X MM X MM X MM X MM X X X X X X X X X X X MX OLX OOOLX X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X LX MX PX RX SX MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM E E E P P P P MM H PZX X PZX X PZX X MM MM MM MM IPRX IPX X X X X IPRX IPX R1-X R1-RX R1X PZX SFX X IPRX IPX PZX SFX X SFX X R2-X R2-RX R2X PZX SFX X X X X IPRX IPX X IPRX IPX X R2-X

99 91 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page R2-RI R2-RX R2X I PZX SFX X IPRX IPX X X X X X R3-X R3-RX R3X NX I PZX SFX X IPRX IPX PZX X FX MT MT MT MT TSQ-10M TSQ-4M TSQ-5M TSQ-6M TSQ-8M TX-05X TX-06X TX-07-H TX-07X TX-08-H TX-08X TX-09-H TX-09X TX-10-H TX-10-W TX-10X TX TX-15-H TX-15-W TX-15X TX TX TX-20-H TX-20-W TX-20X TX-25-H TX-25-W TX-25X TX-27-H TX-27-W TX-27X TX-30-H TX-30-W TX-30X TX-40-H TX-40I TX-40-W TX-40X TX-45X TX-50X X X X X X X X X X X X X X X X X X X X X X X PZX X T X T TX X T X R2-X I PZX SFX X FX X X X MM MM MM PZX X X X X R2-RX R2X PZX SFX X IPX X X R3X PZX X IPX X IPX R4X NX X IPX IPX FX MT TSQ-10M TSQ-12M TSQ-14M TSQ-6M TSQ-8M TX-20X TX-25X TX-27X TX-30X TX-40-4X TX-40-H TX-40X TX TX-45-H TX-45X TX-50-H TX-50X TX-55-H TX-55X X X X X X X X X X X TSQ-10M TSQ-12M TSQ-14M TSQ-5M TSQ-6M TSQ-8M TX TX TX X X X IPRX IPX X IPRX IPX R1-X R1-RX R1X FX PZX SFX X FX PZX SFX X X FX PZX SFX X FX PZX SFX X IPRX IPX X IPRX IPX IPRX IPX X R2-X R2X R2-X R2-RX R2X FX I PZX SFX X X R2-X R2X FX I PZX SFX X X R2-X X X FX I PZX SFX X FX I PZX SFX X X X X X IPRX IPX X R3X PZX FX PZX PZX FX PZX IPRX IPX X IPX IPX IPX IPX IPX IPX TX TX TX TX TX TX TX-10-H TX TX-15-H TX-15-W TX TX-20-H TX TX TX TX IPX IPX IPX IPX IPX IPX TX TX TX TX TX TX TX-15-H TX-15-W TX TX-20-H TX-20-W TX TX TX TX-30-W TX TX TX TX TX TX TX TX-20-H TX TX TX TX TSQ-10M TSQ-12M TSQ-4M TSQ-5M TSQ-6M TSQ-8M TX TX TX TX TX-08-W TX TX TX-10-H TX-10-W TX TX-15-H TX-15-W TX TX TX-20-W TX TX-25-W TX TX-27-W TX TX-30-W TX MM MME MM MM MME X X R2X X PZX X X MM MM TX TX TX TX

100 92 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page X FX I X X TX TX TX TX TX PZX X PZX X MM MM P P X X X X X MM MM MM MM MM MME N N N N N N N N N N N N N-08-10M N-08-10M N-08-10M N N N N N N N-08-12M N-08-12M N-08-12M N N N N N N N N-08-8M N-08-8M N-08-8M N N N N N N N N N N N N SKT MM MM MM MM MM MM MM MM MME F X X X X F F F TX TX TX TX TX TX TX TX55-150M MM MM MM MM MM MM MM MM MM MM MM MME MME X X X X Q X X X X X X X X X X X X X X X X Q Q Q Q MM MM MM MM MM MM MM MM MM MM MME MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM M M M M M M M M M M M M M M M M M M M M M M M M M M M M M-1.5MM M M-10MM M-2.5MM M-2MM M-3MM M-3MM M-3MM M-4MM M-5MM M-5MM M-6MM M-6MM M-7MM M-8MM M-MT M-MT M-MT N N N N N N N N N N N N N N-10MM N N N-12MM N-14MM N-14MM N N N-3MM N-4MM N-5MM

101 93 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page N-6MM N-8MM N-MT N-MT P P P P P P P PH35M PH PH PH56M PS312LM PS312M PS PS38L PS511M PS58XL PU PU37M PU PU56M S W W-95-L W-95-LL NE-3MM NE-4MM NE-4MM-R NE-5MM NE-5MM-R NE-6MM NE-6MM-R NE-8MM W W-848-F W ZN ZN MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MVSFN MM 80 EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX / EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EXL EXL EXL F F FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL FL-SH FL-SW H H-100-1/ H-100-1/ H H-100-3/ H-100-3/8 FS H-100-5/ H-100-5/ H-100-7/ H H HN HN HN HN HN HN HE-100-1/ HE-100-1/ HE-100-3/ HE-100-3/8 FS HE-100-5/ HE-100-5/ HE-100-7/ HE HE HE HFSF HGSF HGSFN

102 94 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page HGSFN HT HTN HTN HTN HTN HTS HTS HTS HTS HTS HTS HTS HTS HTS HTS HTS HTS HTS HTS K K K K K K K K K K K K K K K K-6-10M K-6-10M K-6-10M K-7-11M K-7-12M K-7-12M K-7-12M K-7-12M K-7-13M K-7-13M K-7-13M K-7-13M K-7-13M K-7-14M K-8-15M K-8-15M K-8-15M KM KM K-10-19M K K K K K K K K K K K K K K K K K K-6-10M K-7-11M K-7-13M K-7-13M K-7-13M K-7-13M K-7-14M K-8-15M K-8-15M K-8-15M K-8-16M K-8-16M K-8-17M K-8-18M K K K K K K K K K K K K K K K K K K K K K K-5-7M K-5-7M K-6-10M K-6-10M K-6-10M K-6-10M K-6-10M K-6-8M K-6-8M K-6-8M K-6-9M K-7-11M K-7-12M K-7-12M K-7-12M K-7-13M K-7-13M K-7-13M KM KM K K K K K K K K K-6-10M K-6-10M K-6-10M K-7-11M K-7-11M K-7-12M K-7-12M K-7-12M K-7-13M K-7-13M K-7-13M K-7-14M K-7-14M K-8-15M K-8-15M K-8-15M KM KM KM KM KH-10-19M KH-10-19M KH-10-19M KH-10-19M KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH KH-7-13M KH-7-13M KH-7-13M KH-7-13M KH-7-14M KH-8-15M KH-8-15M KH-8-15M KH-8-16M KH-8-16M KH-8-16M KH-8-16M KH-8-17M KH-8-17M KH-8-17M KH-8-17M KH-8-18M KH-8-18M KH-8-18M KH-8-18M KHM KHM KHM KHM KHW KHW KHW KHW KHW KHW KHW KHW KHW KHW--7-13m KHW--7-13m KHW--7-14m KHW--8-15m KHW--8-15m KHW--8-16m KHW--8-17m KHW--8-17m KHW--8-18m KHW--8-18m KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN KN-7-12M KN-7-12M KN-7-13M KN-7-13M KN-7-13M KN-7-14M KN-7-14M KN-8-15M KN-8-15M KN-8-15M KN-8-16M KN-8-16M KN-8-17M KN-8-17M KN-8-18M KN-8-18M KN-8-18M KNM KNM KNM KNM KNW KNW KNW KNW KNW KNW KNW KNW KNW KNW--7-13m KNW--7-13m KNW--7-14m KNW--8-15m KNW--8-15m KNW--8-16m KNW--8-17m KNW--8-17m KNW--8-18m KNW--8-18m KS KS KS KS KS KS KS KS KS KS KS KS KS-5-7M KS-5-7M KS-6-10M KS-6-10M KS-6-8M KS-6-8M KS-7-11M KS-7-13M KS-7-13M KSM KSM KSM KSM KT-10-19M KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT KT-6-10M KT-6-10M KT-6-10M KT-7-13M KT-7-13M KT-7-14M KT-7-14M KT-7-15M KT-8-13M KT-8-15M KT-8-15M KT-8-15M KT-8-16M KT-8-16M KT-8-16M KT-8-17M KT-8-18M KT-8-18M KT-8-18M L-320X L-322X L-328X M-10MM M-10MM M-10MM M-10MM M-10MM M-10MM M-10MME M-10MME M M M M-1108-E M M M M M M-11MM M-11MM M-11MM M-11MM M-11MM M-11MM M-11MME M-11MME M M M M M M-12MM M-12MM M-12MM M-12MM M-12MM M-12MM M-12MME M-13MM M-13MM M-13MM M-13MM M-13MM M-13MM M-13MM M-13MM M-13MM M-13MM M-13MME M-13MME M-13MME M-14MM M-14MM M-14MM M-14MM M-14MM M-1500-P M-1505-P M-15MM M-15MM M-15MM M-15MM M-15MM M-15MM M-15MM M-15MM M-15MME M-15-S M-15-S M-16MM M-16MM M-17MM M-17MM M-18MM M-18MM M-18MM M-18MM M-18MM M-18MM M-19MM M1E M1E M1E M1E M1E M1E M1E M1E M1P M1P M1P M1P M1P M1P M1P M1P M1P M-21MM M M M M M M M

103 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page M M-4MME M6N M MVN MM.. 79 MF MVN MM NEXXF-S M M-5.5MM M6N M-13MM MVN MM.. 80 MF MVN MM NEXXF-S M M-5.5MME M6N M-13MM MVN MM.. 80 MF MVN MM NEXXF-S M M M6N M-13MM MVN MM.. 80 MF MVN MM NEXXF-S M-320X M M6N-08-12M M-13MM MVN MM.. 78 MF MVN MM-N 79 NEXXF-S M M M6N-08-12M M-14MM MVN MM.. 78 MF MVN MM-NU 79 NEJXXM-S M M M6N-08-12M M-14MM MVN MM.. 78 MF MVN MM NEJXXM-S M M M6N M-14MM MVN MM.. 79 MF MVN MM NEJXXM-S M M M6N M-15MM MVN MM.. 79 MF MVN MM NEJXXM-S M-322X M M6N M-15MM MVN MM.. 79 MF MVN MM NEJXXM-S M-328X M M6N M-15MM MVN MM.. 79 MF MVN MM NEJXXM-S M-32-TX M M6N M-15MM MVN MM.. 79 MFL MVN MM NEJXXM-S M-32-TX M M6N M-15MM MVN MM.. 80 MFL MVN MM NEJXXM-S M M M6N M-16MM MVN MM.. 78 MH MVN MM NEJXXM-S M M M6N-08-8M M-16MM MVN MM.. 78 MH MVN MM NEJXXM-S M M M6N-08-8M M-16MM MVEN MM.. 78 MHGN MVN MM NEJXXM-S M M M6N-08-8M M-17MM MVFN MM.. 78 MHM-10mm MVN MM NEKXXM-S M M M-7MM M-18MM MVMN-5-13MM MHM MVN MM NEKXXM-S M M M-7MM M-18MM MVMN-63-10MM MHM MVNNU MM. 80 NEKXXM-S M M5E M-7MM M-18MM MVMN-64-10MM MHM-7mm MVEN MM NEKXXM-S M M5E M-7MME M MVMN-65-10MM MHM-8mm MVEN-1-7MM NEKXXM-S M M5E M-7MME M MVNN-1-13MM MN-10MM MVFN-99-19MM NEKXXM-S M M5E M M M MN-17MM MVMN-1-15MM NEKXXM-S M3E M5E M M M MN6N-08-10M MVMN-60-10MM NEKXXM-S M3E M-5MM M M M-10MM MN-8MM MVMN-61-10MM NEKXXM-S M3E M-5MME M M M-10MM-80M MR-7MME MVMN-8-7MM NEKXXM-S M3E M5P M M M MRHN MVMN-9-7MM NEKXXM-S M3E M5P M-8MM M M MRMVFSFN-20-21MM MVMSFN-60-10MM.. 79 NEMXXF-S M3E M5P M-8MM M M-6MM MVMSFN-62-10MM.. 79 NEMXXF-S M3P M5P M-8MM M M-7MM MRN-5.5MME MX NEMXXF-S M3P M5P M-8MM M M-8MM MRN-7MME MX NEMXXF-S M3P M M-8MME M-5.5MM MT MRSFVN741-10M-NU MX NEMXXF-S M3P M M-8MME M M MX NEMXXF-S M3P M M-9MM M M MRSFVMN-58-10MM 79 MX NEMXXF-S M3P M-6MM M-9MM M M MRVN-97-7MM MZ NEMXXF-S M3P M-6MM M-9MM M M MRVN MM-NU MZ NEMXXF-S M3P M-6MM M-9MME M-5MM M MZ NEMXXF-S M M-6MME M-10MM M-6MM M MRVN MM-N MZ NEMXXF-S M M-6MME M-10MM M-6MM M MZ NEUXXF-S M M6N M-10MM M-7MM MET MRVSFN MM 79 MZN NEUXXF-S M M6N M-10MM M-7MM MET MRVEN MM.. 80 MZN NEUXXF-S M M6N M-11MM M-8MM MET MRVFSFN MM 78 MZN NEUXXF-S M M6N M-11MM M-8MM MET MRVFSFN-18-21MM. 78 NEXXM-S NEUXXF-S M M6N M M-9MM MET MRVMN-9-7MM NEXXM-S NEUXXF-S M M6N M M-9mm MET MRVNN-1-15MM NEXXM-S NS M M6N M M-HE MF MSFVN MM. 79 NEXXM-S NS M M6N M MRVEN MM. 80 MF MSH NEXXM-S NS M M6N M MRVFN MM. 80 MF MSH NEXXM-S NS M OR M6N M MRVFSFN MM MF MSH NEXXM-S NS E M M6N M MF MSW NEXXM-S NS M M6N M MRVGN-34-22MM.. 78 MF MSW NEXXM-S NS M M6N M MSFVN MM 79 MF MSW NEXXM-S NS M-490-NR M6N M-12MM MVN-85-8MM MF MSW NEXXM-S NS M-490-OR M6N-08-10M M-12MM MVN MM.. 80 MF MSW NEXXM-S NS M M6N-08-10M M-12MM MVN MM.. 78 MF MSW NEXXF-S NS M M6N-08-10M M MVN MM.. 79 MF MV MM NEXXF-S NS M M6N M MVN MM.. 79 MF MVN-53-7MM NEXXF-S NS M M6N M MVN MM.. 79 MF MVN MM NEXXF-S NS

104 96 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NP-32-TX OL-322X OOL-322X OOOL-322X OS-10MM OS-10MM OS-10MM OS OS OS OS OS OS-8MM OSM OSM OSM-10MM OSM-10MM OSM-8MM OSSF-10MM OSSF-10MM OSSF OSSF OSSF-8MM P P P P P P P P P P P-320X P-322X P-328X QR QR QR QR QR QR QR QR QR QR QR QR QR QR QRF QRF QRF QR-M QR-M M QR-M QR-M R-320X R-321X R-322X R-328X R-32-TX RN RSFN RSFN RM RM RM RMN-10MM RMN-10MM RMN-7MM RMRVFN MM 78 RMRVGSFN-38-22MM RMVN MM. 79 RMVN MM. 79 RMVFSFN-18-21MM 78 RMVGSFN-53-21MM 78 RMSFN RP RP RP RP RP RP RP RP S-320X S-321X S-328X S-32-TX S S S S S S S S S S S-15-6M S-15-7M S-16-10M S-16-8M S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S-36-10M S-37-12M S-37-13M S-37-14M S-38-15M S-38-17M S-38-18M S S S S S S S S S S S S S S S M S M S M S M S M S S S S-57-13M S-57-14M S-58-15M S-58-16M S-58-17M S-58-18M S S S S S S S S S S S S S S S S S S M S M S M S M S M S M S M S S S S S S S M S M S M S M S M S M S M S M S S S S ,26,43,46 S S ,19,26,53,57 S ,26,53 S S S S ,26 S S S ,26 S S S S PZ S S S R S R S S S S S S S-5346-K S-5346-N S-5346-O S S S S S S SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF-10MM SF SF SF-11MM SF-11MM SF-11MM SF-11MM SF-11MM SF-11MM SF-11MM SF-12MM SF-12MM SF-12MM SF-12MM SF-12MM SF-12MM SF-12MM SF-12MM SF-12MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-13MM SF-14MM SF-14MM SF-14MM SF-14MM SF-14MM SF-14MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-15MM SF-16MM SF-16MM SF-16MM SF-16MM SF-16MM SF-16MM SF-16MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-17MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-18MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-19MM SF-20MM SF-21MM SF-21MM SF-21MM SF-21MM SF-21MM SF-21MM SF-21MM SF-22MM SF-22MM SF-22MM SF-22MM SF-22MM SF-22MM SF-23MM SF-24MM SF-24MM SF-24MM SF-24MM SF-24MM SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF

105 97 Part Number Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF SF-8MM SF-8MM SF-8MM SF-H SF-HE SF-SH SF-SH SF-SW SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH SH-629-P SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ SJ-935-1/ SJ-935-1/ SJ MXM SJ MXM SJ MXM SJ MXM SJ MXM SJ-935-3/8 FS SJ-935-5/ SJ-935-7/ SMN M SMN M SMN M SMSFVN637-13M-NU SMVN MM.. 79 SMVN MM.. 79 SMVSFNNU M SMVEN MM.. 78 SMVMN-65-10MM SW SW SW SW SW SW SW SW SZ ,43 SZ SZ-10-10MM SZ-10-12MM SZ-10-14MM ,57 SZ-10-17MM ,57 SZ-10-19MM SZ SZ ,43 SZ ,43 SZ ,43 SZ SZ ,,43 SZ ,43 SZ SZ SZ SZ ,43 SZ ,43 SZ SZ ,43 SZ-14-17MM SZ-14-19MM SZ-14-22MM SZ-14-24MM SZ-14-27MM SZ ,43,53 SZ SZ SZ ,43 SZ ,43,53 SZ ,43 SZ ,43,53 SZ SZ SZ SZ ,53 SZ SZ ,53 SZ SZ ,53 SZ SZ SZ ,53 SZ ,53 SZ ,53 SZ ,53 SZ ,53 SZ SZ SZ SZ SZ ,19,53 SZ SZ ,19,53 SZ SZ SZ SZ SZ SZ SZ SZ SZ SZ MM ,46 SZ-3-7-4MM ,46 SZ-3-7-5MM ,46 SZ-3-7-6MM ,46 SZ-3-7-8MM ,46 SZ SZ SZ SZ SZ SZ ,53 SZ ,53 SZ ,53 SZ MM ,57 SZ MM....19,57 SZ MM SZ MM ,57 SZ MM ,57 SZ MM ,57 SZ-5-7-4MM SZ-5-7-5MM SZ-5-7-6MM SZ-5-7-8MM ,57 SZ SZ MM SZ MM SZ MM SZ MM SZ-7-10MM....19,46,57 SZ-7-12MM ,57 SZ-7-14MM ,57 SZ-7-4MM ,46 SZ-7-5MM ,46 SZ-7-6MM ,46 SZ-7-8MM ,46,57 SZ SZ SZ MM SZ MM SZ MM SZ MM SZ MM SZ SZ SZ SZ SZ SZ SZ-8L-TX SZ SZ SZ SZ-TX SZ-TX SZ-TX SZ-TX SZ-TX SZ-TX SZ-TX SZ-TX T-320X T-321X TH TH TH TH TH TH TH TH TH TM TM TN TN TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW TW-4-R TW TW-5-R TW TW TWE TWE TX TX TX TX TX TX TX TX TX TX TX TX TX TX TX-1E TX-1E TX-1E TX TX TX TX TX TX TX TX TX TX TX TX TX TX TX-3E TX-3E TX TX TX TX TX TX TX TX TX TX TX TX TX U-321X UG-10MM UG-10MM UG-10MM UG-13MM UG-13MM UG-15MM UG-18MM UG UG UG UG UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-EX UG-M-10MM UG-M-10MM UG-M-10MM UG-M-13MM UG-M UG-M UG-M UG-M UG-M UG-M UG-M UG-M UG-M-10MM UG-M-10MM UG-M-13MM UG-SF-13MM UG-SF-15MM UG-SF-18MM VN MM VN MM VN-248-8MM VN MM VN MM VN MM VN-69-24MM VN MM VN MM VN MM VN MM VN MM VN MM VN MM VN MM VSFN MM-N 80 VSFN MM VSFN MM VESFN MM VESFN MM VFSFN MM VFSFN MM VFSFN MM VFSFN MM VFSFN MM VGFLN-40-22MM VGN MM VGN MM VGN-28-19MM VGSFN MM VGSFN-34-19MM VGSFN-39-22MM VGSFN-40-22MM VGSFN-55-21MM VGSFN-56-21MM VMN-1-16MM VMN-1-21MM VMN-2-15MM VMN-2-19MM VMN-56-10MM VMN-6-13MM VMN-70-10MM W-321X WJ-265-1/ WJ-265-1/ WJ / WJ / WJ-265-3/ WJ-265-3/ WJ-265-7/ WJ-284-1/ WJ-284-1/ WJ-284-3/ WJ-284-3/ WJ-284-5/ WJ-284-5/ WJ-284-7/ WJ-284-9/ X X Y-321X YK YK YK YK YK YK YK Z Z Z Z Z Z ZE ZE ZE ZN ZN ZN ZN ZN ZN

106 The Total Solution The total solution from ooper Power Tools includes not only a complete line of quality industrial tools and accessories but also a professional engineering and product support staff to help customize each tool to specific application requirements. ll are as close as a telephone or . ooper Power Tools maintains company-owned Service enters in strategic locations throughout the world, staffed with professional tool repair technicians who use genuine ooper Power Tools parts and who are outfitted with the very latest in testing, calibration and inspection equipment. Each tool that is returned to a customer from one of our Service enters carries with it a warranty that is ooper Power Tools assurance that it will perform just like it did when it was purchased new. Our support personnel are fully capable of helping to diagnose problems and promptly recommend solutions. Our complete line of tools are carefully designed and built from the finest materials available in order to provide years of trouble free service. ut, as with any piece of equipment, service problems can occur. ll tools are designed to be easy to service... that is, of course, with properly trained personnnel. To facilitate quick repairs, and limit downtime... ooper Power Tools conducts training seminars covering all aspects of every tool we make. Introductory training seminars are designed to fully acquaint students with the entire line of tools and their fundamental operation. dvanced training seminars, which are often tailored to individual needs, are designed to hone the skills of the experienced student. Hands-on experience, with an emphasis on troubleshooting and repairing, are the focus of this training. Service literature, product information, brand catalogs and FQs are also available around the clock on the Web. Just access for the latest information available about any of our products and services. 98

107 99

108 Sales & Service enters Note: ll locations may not service all products. Please contact the nearest Sales & Service enter for the appropriate facility to handle your service requirements. allas, TX ooper Power Tools Sales & Service enter 1470 Post & Paddock Grand Prairie, TX Tel: (972) Fax: (972) etroit, MI ooper Power Tools Sales & Service enter 4121 North tlantic lvd. uburn Hills, MI Tel: (248) Fax: (248) Houston, TX ooper Power Tools Sales & Service enter 6550 West Sam Houston Parkway North, Suite 200 Houston, TX Tel: (713) Fax: (713) Seattle, W ooper Power Tools Sales & Service enter nd ve N.E. Redmond, W Tel: (425) Fax: (425) Lexington, S ooper Power Tools 670 Industrial rive Lexington, S Tel: (800) Tel: (803) Fax: (803) York, P ooper Power Tools Sales & Service enter York Service enter 3990 E. Market Street York, P Tel: (717) Fax: (717) razil ooper Tools Industrial Ltda. v. Liberdade, 4055 Zona Industrial - Iporanga Sorocaba, SP razil Tel: (011) Fax: (011) anada ooper Power Tools Sales & Service enter 5925 McLaughlin Road Mississauga, Ont. L5R 18 anada Tel: (905) Fax: (905) hina ooper (hina) o., Ltd. 955 Sheng Li Road, Heqing Pudong, Shanghai hina Tel: Fax: France ooper Power Tools SS Recoules Operation Zone Industrielle P 28 venue Maurice hevalier Ozoir-la-Ferrière edex France Tel: (011) Fax: (011) Germany ooper Power Tools GmbH & o. OHG Postfach Westhausen Tel: +49 (0) 73 63/ 81-0 Fax: +49 (0) 73 63/ Mexico ooper Power Tools de México S.. de.v. Libramiento La Joya No. 1 odega No. 2 Esq. Politécnico, arrio San José uautitlán, Edo de México.P Phone: (011) Fax: (011)

109 ooper Power Tools Is On The Web! ooper Power Tools provides a complete resource for power tools on-line. Our website offers product information, service literature, brand catalogs, press releases and more. dominant source of information, the ooper Power Tools website is your source for application solutions on-line. Up-to-date product catalogs are also available online providing you with current information on our broad product line. Even Material Safety ata Sheets (M.S..S.) for Safety and isposal Information are available on our website. Making your job easier is our goal! You can access service literature anytime. hoose a category such as ssembly Tools or Material Removal Tools from the main menu and then click on the brand you re looking for. You ll be on your way to any current service literature you need, whether it s leco, pex, Master Power, or any of our power tool brands. It s simple! Our ustomer are section provides you with information such as answers to frequently asked questions or contact phone numbers and addresses for your area of the country. You can browse through the What s New information to learn how ooper Power Tools continues to be your source for solutions. For even faster searches, you can go direct to a brand site by simply entering the brand name. Entering takes you directly to the otco brand site. What is the future of dynamic site continuing to focus on your need for up-to-date information on the latest ooper Power Tools offerings that you can access anytime you need... twenty-four hours a day, seven days a week! 101

110 Order atalogs & Literature On-Line One of the broadest range of tools in the world is at your fingertips! ooper Power Tools covers a wide range of industrial markets, including aerospace, automotive, foundries, furniture, general industry, metal fabrication, petroleum, power generation, shipbuilding, and transportation. These markets have been served by ooper Power Tools brands for many decades, by offering our customers solutions and products that meet their demanding productivity requirements. To receive a product catalog quickly, just go to Select the literature or software you want. Then complete the ontact Information form, hit Submit Request and your order will be processed immediately. Materials normally arrive within 48 hours. elow are a few of our more popular product catalogs pex Fastener Tools comprehensive line of industrial quality bits, finders, sockets and extensions. (atalog # T-100) otco/leco Material Removal Tools full line of pneumatic material removal tools including drills, sanders, and grinders. (atalog # SP-102) Gardner-enver ir Hoists broad line of quality pneumatic hoists for industrial applications. (atalog # SP-103) pex Universal Joints Industrial quality universal joints that can be custom designed for most any application. (atalog # SP-1400) leco Pneumatic ssembly Tools full line of industrial pneumatic assembly tools from screwdrivers to nutrunners to impacts. (atalog # SP-1000) leco.. Electric ssembly Tools complete line of industrial.. electric assembly tools and controllers. (atalog # SP-105) uckeye otco Gardner-enver Power Motors comprehensive line of industrial pneumatic motors for a multitude of applications. (atalog # SP-104) uckeye Fixtured rills n extensive line of industrial pneumatic fixtured drills. (atalog # SP-105) Master Power Industrial ir Tools complete line of industrial pneumatic tools for assembly and material removal applications. (atalog # SP-904) Utica Torque Products full line of torque measuring products including torque screwdrivers, torque wrenches and analyzers. (atalog # SP-301) iretool Tube leaners & Expanders complete line of industrial tube cleaners, expanders and installation tools. (atalog # SP-1100) 102