Screwdrivers. Crimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws.

Size: px

Start display at page:

Download "Screwdrivers. Crimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws."

Constance Powers
5 years ago
Views:

They also have an automatic torque limit and high repetition accuracy. Weidmüller bits The Weidmüller bits are standard bits with high quality, wide range and top-rate performance.

1 rimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws. Electric screwdrivers Weidmüller screwdrivers are ideal one-hand tools due to their ergonomic design. They guarantee fatigue-free working in any installation direction. They also have an automatic torque limit and high repetition accuracy. Weidmüller bits The Weidmüller bits are standard bits with high quality, wide range and top-rate performance. Weidmüller uses processorcontrolled hardening processes to guarantee consistently high product quality. The high-grade material enables torques far above those stipulated in the relevant DI standards: DI 5261 for PH/PZ bits DI 5263 for slot bits amcar standard for TORX bits This means long service life at high torques, producing ideal conditions for standard work. Product benefits: Suitable for all screw driving tasks Ideal for both manual and machine screw driving tasks due to the high hardness values of HR Good wear-resistance and therefore long service life Optimum fit in DI screws for low wear and optimum torque transmission Manufactured with consistently high product quality driven by the relevant ISO standards..44

Rechargeable torque screwdriver DMS 3 DMS 3 Set DMS 3 rechargeable torque screwdriver One-hand operation under all working conditions Switchable forward and reverse Two speeds: 200 and 400 rpm

.. 3 m in 6 steps onsistent performance during battery discharge Grip swings easily from rod to pistol form Takes 1/4" bits held by ball-bearing clamping mechanism (form E6.

2 Rechargeable torque screwdriver DMS 3 DMS 3 Set DMS 3 rechargeable torque screwdriver One-hand operation under all working conditions Switchable forward and reverse Two speeds: 200 and 400 rpm Precise torque settings from approx m in 6 steps onsistent performance during battery discharge Grip swings easily from rod to pistol form Takes 1/4" bits held by ball-bearing clamping mechanism (form E6.3) Safety lock prevents inadvertent switch-on Easy changeover from battery drive to manual operation up to 15 m Technical data Screwdriver Motor Idling speed Max. torque huck Length Weight Battery Type Weight harger Input Output harging time Weight 2.4 V D 200/400 rpm 3.0 m 1/4" 6.3 DI mm 400 g 2 i-d batteries each 1.2 V 122 g 230 V A, 50 Hz, 50 ma 2.9 V A, 1.4 A, 4.1 VA 1 hour 700 g Ordering data Type Qty Order no. DMS Screwdriver incl. battery Type Qty Order no. DMS 3 set 1 (screwdriver incl. battery, charger, bits, plastic carrying case) DMS 3 set 2 (as set with 1 additional battery) Accessories Type Qty Order no. Spare battery harger Delivery times see page X.2.45

3 Electric torque screwdriver DMS 2 Torque adjustable in four steps for standard screws M2.5 to 4 Selectable electric power-off when reaching a predefined torque High repetition accuracy Start in search-gear and switching to working rotation speed is controlled via the pressing power onto the screw head Switchable forward and reverse Fatigue-free working due to ergonomic design and low weight Ideal design for one-hand operation under all working conditions and at different working locations Low noise Low energy consumption Technical data Rated voltage Frequency Rated power urrent consumption Rpm of spindle in searching mode in working mode Torques Level 1 (M 2.5) Level 2 (M 3) Level 3 (M 3.5) Level 4 (M4) 230 V 50 Hz 45 W 0.2 A 350 min min ± 0.1 m 0.7 ± 0.15 m 1.2 ± 0.2 m 1.7 ± 0.25 m Weight incl. supply cable Weight oise level acc. to DI ,990 kg 0,820 kg 58 db (A) Protection class II acc. to DI DI/VDE 0740 T.1 and T.2 EM acc. to E directive 89/336/EE E mark Ordering data Standard equipment Type Qty Order no. DMS 2 with 1/4" drive Form 6.3 DI 3126 with hang-up clamp and 4 bits for slotted screws (50 mm) Dimensions of the blade 0.5 x 3 / 0.6 x 3.5 / 0.8 x 4 / 1.0 x 5.5 Accessories Balancer for hanging up the DMS 2 Type Qty Order no. BAL 2 (balancer for hanging up the DMS 2) Delivery times see page X.2

Bits - drive A5.5 5.5 mm hexagon insert bit drive acc. to DI 3126, form A 5.5 for direct connection (for electric screwdriver Type DMS2 A 5.5) Bit A5.5 S Slot-head bits DI 5264, drive A5.

6 4 75 0535100000 BIT A5.5 0.8X4,0X50 0.8 4 50 0498700000 BIT A5.5 0.8X4,0X75 0.8 4 75 9024740000 BIT A5.5 0.6X4,5X50 0.6 5 50 9009220000 BIT A5.5 1.0X5,5X50 1.0 6 50 0498800000 BIT A5.5 1.0X5,5X125 1.

4 Bits - drive A mm hexagon insert bit drive acc. to DI 3126, form A 5.5 for direct connection (for electric screwdriver Type DMS2 A 5.5) Bit A5.5 S Slot-head bits DI 5264, drive A5.5 DI 3126 A B Type Size A B Order no. BIT A X3,0X BIT A X3,0X BIT A X3,5X BIT A X3,5X BIT A X4,0X BIT A X4,0X BIT A X4,5X BIT A X5,5X BIT A X5,5X Bit A5.5 PH ross-head bits Type Phillips-Recess PH/DI 5260, drive A5.5 DI 3126 BIT A5.5 PH 1X BIT A5.5 PH 1X BIT A5.5 PH 2X BIT A5.5 PH 2X BIT A5.5 PH3x Bit A5.5 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive A5.5 DI 3126 BIT A5.5 PZ 1X BIT A5.5 PZ 2X BIT A 5.5 PZ3x UBH 5.5 Universal bit holder, magnetic, drive: A5.5 DI 3126 output: 1/4 D6.3 UBH Bit-Box Weidmüller Bit-Box, 9-part with universal-holder drive: A5.5 DI 3126 output: 1/4 D6.3 bits 1/4 6.3 Bit-Box WI Delivery times see page X.2.47

Bits - drive 1/4 6.3 1/4 -hexagon insert bit drive acc. to DI 3126, form 6.3 for direct connection (DMS2 1/4 6.3) Bit 6.3 S Slot-head bits DI 5264, drive 1/4 6.3 DI 3126 A B Type Size A B Order no.

5 4 25 9009310000 BIT 6.3 0.8X4.0X39 0.8 4 39 9025520000 BIT 6.3 0.8X4.0X75 0.8 4 75 9024770000 BIT 6.3 0,6x4,5x25 0.5 5 25 9009320000 BIT 6.3 1.0x5.5X39 1.0 6 39 9025530000 BIT 6.3 1.0X5.5X125 1.

5 Bits - drive 1/ /4 -hexagon insert bit drive acc. to DI 3126, form 6.3 for direct connection (DMS2 1/4 6.3) Bit 6.3 S Slot-head bits DI 5264, drive 1/4 6.3 DI 3126 A B Type Size A B Order no. BIT X3.0X BIT X3.0X BIT X3.5X BIT X3.5X BIT x4.0x BIT X4.0X BIT X4.0X BIT 6.3 0,6x4,5x BIT x5.5X BIT X5.5X Bit 6.3 PH ross-head bits type Phillips-Recess PH/DI 5260, drive 1/4 6.3 DI 3126 BIT 6.3 PH0x BIT 6.3 PH1x BIT 6.3 PH 1X BIT 6.3 PH 1X BIT 6.3 PH2x BIT 6.3 PH 2X BIT 6.3 PH 2X Bit 6.3 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive 1/4 6.3 DI 3126 BIT 6.3 PZ0x BIT 6.3 PZ1x BIT 6.3 PZ1X BIT 6.3 PZ2x BIT 6.3 PZ 2X UBH 1/4 6.3 Universal bit holder, magnetic, drive: 1/4 6.3 DI 3126 output: 1/4 D6.3 UBH 1/ BHS 1/4 Bit holder with flexible shank for angled screwing, for all bits 1/4 drive 6.3 DI 3126 with SoftFinish-grip BHS 1/ Delivery times see page X.2

Bits-drive 1/4 6.3 1/4-male hexagon drive according to DI 3126, form 06.

6 Bits-drive 1/ /4-male hexagon drive according to DI 3126, form 06.3 for direct connection (DMS3) Bit-Box DMS2 Weidmüller Bit-Box, 9-part with universal-holder drive: 1/4 6.3 DI 3126 output: 1/4 D6.3 bits 1/4 6.3 Type Size A B Order no. Bit-Box WI DMS Delivery times see page X.2.49

7 Bits - drive 1/4 E6.3 1/4 -hexagon insert bit drive acc. to DI 3126, form E6.3 for direct connection (DMS3) Bit E6.3 S Slot-head bits DI 5264, drive 1/4 E6.3 DI 3126 B Type Size A B Order no. BIT E x3x BIT E X3.0X BIT E x3.5x BIT E X3.5X BIT E x4.0x BIT E X4.0X BIT E x5.5x BIT E X5.5X Bit E6.3 PH ross-head bits Type Phillips-Recess PH/DI 5260, drive 1/4 E6.3 DI 3126 BIT E6.3 PH 1X BIT E6.3 PH 2X Bit E6.3 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive 1/4 E6.3 DI 3126 BIT E6.3 PZ 1X BIT E6.3 PZ 2X UBH 1/4 E6.3 Universal bit holder, short, magnetic, drive: 1/4 E6.3 DI 3126, output: 1/4 D6.3 UBH 1/4 E UBH SWH 1/4 licfix Universal quick-change holder with locking function and magnet. Real one-hand operation for quick bit changing 1/4 drive E6.3 DI 3126, output 1/4 D6.3 UBH SWH 1/ Delivery times see page X.2

8 Bits - drive 1/4 E6.3 1/4 -male hexagon drive acc. to DI 3126, Form E6.3 for direct connection (DMS3) Bit-Box DMS3 Weidmüller Bit-Box, 9-part with universal-holder drive 1/4 E6.3 DI 3126, output 1/4 D6.3 bits 1/4 6.3 Type Size A B Order no. Bit-Box WI DMS Delivery times see page X.2.51

Overview Weidmüller screwdrivers come in four different grip sizes, and are the result of a consistent grip concept which takes into account both the human hand and the different requirements when

9 Overview Weidmüller screwdrivers come in four different grip sizes, and are the result of a consistent grip concept which takes into account both the human hand and the different requirements when working Perfect handling with all grip sizes Maximum torques Optimum transmission of axial force omplete range including all commercial dimensions SoftFinish-grip With the SoftFinish zone for use in dry conditions and for general applications, Weidmüller offers a complete range of screwdrivers that enables far higher torques and at the same time substantially more comfort due to the soft material of the grip. Product benefits: Made of special soft material which is kind to the skin, the SoftFinish zone enables maximum torques Perfect ergonomic grip design for comfortable screw driving and optimum handling Version with solid steel tip can be used for chiselling You can choose from long-life extremely stressable blades in standard sizes hromtop blade tip offers maximum corrosion protection and greatest possible dimensional accuracy of the blade geometry in the screw head over many years SoftFinish electric VDE-insulated screwdriver according to DI E 60900, IE 900 for work on live equipment Product benefits: The protective insulation directly injected onto the screwdriver blade ensures electrical safety, even in critical applications Safe for working at up to 1500 volts D and 1000 volts A Each screwdriver is individually tested in a water bath at 10,000 volts according to DI E Perfect ergonomic grip design for comfortable screw driving and optimum handling Made of special soft material which is kind to the skin, the SoftFinish zone prevents slipping in critical situations and at the same time enables maximum torques.52

ombined cutting and screw driving tool that does not damage the edge; for cutting of copper cables with a diameter of up to 1.5 mm 2 solid and 2.5 mm 2 flexible.

5 mm Minimum manual force required Automatic opening of the cutter Ergonomically designed grip swifty set Efficient operation: Only one tool for cable-processing in ID-technology Suitable for screw

10 ombined cutting and screw driving tool that does not damage the edge; for cutting of copper cables with a diameter of up to 1.5 mm 2 solid and 2.5 mm 2 flexible. swifty swifty set swifty able cutting tool to mount on non-insulated screw drivers with a blade diameter of 3.5 mm Minimum manual force required Automatic opening of the cutter Ergonomically designed grip swifty set Efficient operation: Only one tool for cable-processing in ID-technology Suitable for screw and tension clamps Readily available pocket size for right-handed and left-handed use One-hand operation Technical data Maximum cutting performance opper cable: Solid cable (conductor cross-section) mm 2 Flexible cable (conductor cross-section) mm Tool data Length/width/height Weight mm g 35 / 18 / Ordering data Type Qty Order o. swifty (without screwdriver) Type Qty Order o. swifty set (with screwdriver) Screwdriver (SD x100) Delivery times see page X.2.53

11 VDE insulated Screwdriver VDE-insulated screwdriver sets, for working on live parts up to 1000 V A and 1500 V D. DI E 60900, IE 900. safety tested GS, checked individually. Blade made from high-alloy chromium-vanadiummolybdenum steel, through-hardened, browned SDI S VDE-insulated slot-head screwdriver, SDI DI 7437, ISO 2380/2, output acc. to DI 5264, ISO 2380/1, SoftFinish-grip Type Size / SW A B Order o. SDI 0.4X2.5X SDI 0.5X3.0X SDI 0.6X3.5X SDI 0.8X4.0X SDI 1.0X4.5X SDI 1.0X5.5X SDI 1.2X6.5X SDI 1.6x8.0x SDIK PH VDE-insulated crosshead screwdriver type Phillips, SDIK PH DI 7438, ISO 8764/2-PH, output acc. to DI 5260-PH, ISO 8764/1-PH, SoftFinishgrip SDIK PH SDIK PH SDIK PH SDIK PH SDIK PZ VDE-insulated crosshead screwdriver type Pozidriv SDIK PZ DI 7438, ISO 8764/2-PZ, output acc. to DI 5260-PZ, ISO 8764/1-PZ, SoftFinishgrip SDIK PZ SDIK PZ SDIT VDE-insulated Torx -screwdriver, SDIT SoftFinish-grip SDIT SDIT SDIT SDIT SDIT SDIT SKI VDE-insulated hexagon socket wrench, ISK SoftFinishh-grip ISK 5.0x ISK 5.5x ISK 6.0x ISK 7.0x ISK 8.0x ISK 9.0x ISK 10.0x ISK 11.0x ISK 13.0x125 13, Delivery times see page X.2

VDE insulated Screwdriver VDE-insulated screwdriver sets Weidmüller SoftFinish electric for working on live parts up to 1000 V A and 1500 V D. DI E 60900, IE 900.

5 3.0 100 SDI 0.8x4.0x100 0.8 4.0 100 SDI 1.0x5.5x125 1.0 5.5 125 SDI PH 1 80 SDI PH 2 100 SDIS 2.5-5.5/PH1/2 9009730000 DMSI VDE-insulated torque-screwdriver E ISO 6789, BS E 26789, ASME B107.

12 VDE insulated Screwdriver VDE-insulated screwdriver sets Weidmüller SoftFinish electric for working on live parts up to 1000 V A and 1500 V D. DI E 60900, IE 900. safety tested GS, individually hecked SDIS /PH/1/2 6-part set: VDE-insulated slot-head and cross-head PH Screwdriver set Type Size / SW A B Order o. SDI 0.4x2.5x SDI 0.5x3.0x SDI 0.8x4.0x SDI 1.0x5.5x SDI PH 1 80 SDI PH SDIS /PH1/ DMSI VDE-insulated torque-screwdriver E ISO 6789, BS E 26789, ASME B107.14M DMSI manual m DMSI manual m WK SI VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5264, ISO 2380/1 WK SI 0.4 x 2.5 max. 0.6 m WK SI 0.5 x 3.0 max. 0.6 m WK SI 0.6 x 3.5 max. 1.1 m WK SI 0.8 x 4.0 max. 2.5 m WK SI 1.0 x 5.5 max. 3.8 m WK IK PH VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5260-PH, ISO 8764/1-PH WK IK PH 0 max. 0.9 m WK IK PH 1 max. 3.8 m WK IK PH 2 max. 5.5 m WK IK PZ VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5260-PZ, ISO 8764/1-PZ WK IK PZ 0 max. 0.9 m WK IK PZ 1 max. 3.8 m WK IK PZ 2 max. 5.5 m Delivery times see page X.2.55

13 Uninsulated screwdriver Weidmüller SoftFinish screwdriver for general uses, blade made from high-alloy chromium-vanadium-molybdenum steel, through-hardened, matt chrome finish. SD S Slot-head screwdriver with circular blade SD DI 5265, ISO 2380/2, ouput acc. to DI 5264, ISO 2380/1, point chromium top, SoftFinish-grip Type Size / SW A B Order o. SD 0.4x2.0x SD 0.4x2.5x SD 0.5X3.0X SD 0.6X3.5X SD 0.6X3.5X SD 0.8X4.0X SD 1.2x6.5x SD 0.8x4.5x SD 1.0X5.5X SDK PH rosshead screwdriver Type Phillips, SDK PH DI 5262, ISO 8764/2-PH, ouput acc. to DI 5260-PH, ISO 8764/1-PH, point chromium top, SoftFinish-grip SDK PH SDK PH SDK PH SDK PH SDK PZ rosshead screwdriver Type Pozidriv, SDK PZ DI 5262, ISO 8764/2- PZ, ouput acc. to DI 5260-PZ, ISO 8764/1-PZ, point chromium top, SoftFinish-grip SDK PZ SDK PZ SDK PZ SDK PZ SDTR Torx TR-screw driver with drill hole in the blade point (Tamper Resistant), SD TR for screwing of Torx and Torx -TR safety screws (centre pin in profile), point chromium top, SoftFinish-grip SDTR SDTR SDTR SDTR SDTR SDTR SK Hexagon socket wrench SK DI 3125, ouput acc. to DI 3125, SoftFinish-grip SK 5.0x SK 5.5x SK 6.0x SK 7.0x SK 8.0x SK 9.0x SK 10.0x SK 11.0x SK 12.0x SK 13.0x Delivery times see page X.2

14 Uninsulated screwdriver Set of interchangeable blades made from high-alloy chromiumvanadium-molybdenum steel, through-hardened, high-quality galvanised finish. System 11+1 S-PH-PZ-SK 12-part set of interchangeable blades for slot-head, cross-head PH/PZ and hexagon screws, SoftFinish-grip System 11+1 TW-TS-TR 12-part set of interchangable blades for screwing of Torx, Torq and Tri-Wing safety screws. Set S 2.5/3.0/4.0/5.5/PH 1/2 12-part set of interchangeable blades for slot-head, cross-head PH screwdriver set with circular blades Type Size / SW A B Order o. SD SD SD SD PH PH PZ PZ SK SK SK System TW TW TW TW TS TS TR TR TR TR TR System 11+1 Secur SD 0.4x2.5x SD 0.5x3.0x SD 0.8x4.0x SD 1.5x5.5x SD PH SD PH SDS /PH1/ Set TR 10/15/20/25/30/40 6-part set: Torx screw driver with drill hole in the blade point SD TR SD TR SD TR SD TR SD TR SD TR SDS TR SD STK Flat blade screwdriver with solid steel cap SD STK DI 5265, ISO 2380/2, ouput acc. to DI 5264, ISO 2380/1, can also be used as a chisel due to steel cap SoftFinish-grip SD STK 8x SD STK 10x Delivery times see page X.2.57

15 Screwdriver Torque-screwdriver Weidmüller SoftFinish DMS Torque-screwdriver E ISO 6789, BS E 26789, ASME B107.14M Type Size / SW A B Order o. DMS manual m DMS manuell m WK K PZ Interchangeable blades for torque-screwdriver output according to DI 5260-PZ, ISO 8764/1-PZ WK K PZ 0 max. 0.9 m WK K PZ 1 max. 3.8 m WK K PZ 2 max. 5.5 m WK K PH Interchangeable blades for torque-screwdriver output according to DI 5260-PH, ISO 8764/1-PH WK K PH 0 max. 0.9 m WK K PH 1 max. 3.8 m WK K PH 2 max. 5.5 m WK K S Interchangeable blades for torque-screwdriver output according to DI 5264, ISO 2380/1 WK S 0.4 x 2.5 max. 0.6 m WK S 0.5 x 3.0 max. 0.6 m WK S 0.6 x 3.5 max. 1.1 m WK S 0.8 x 4.0 max. 2.5 m WK S 1.0 x 5.5 max. 3.8 m Delivery times see page X.2

Wrench set Weidmüller Allen key in PocketStar Allen key made from high-alloy chromium-vanadium- steel, acc. to DI ISO 2936 L (DI 911), surface high-quality refined.

16 Wrench set Weidmüller Allen key in PocketStar Allen key made from high-alloy chromium-vanadium- steel, acc. to DI ISO 2936 L (DI 911), surface high-quality refined. SK WSD S 9-part offset screwdriver set in Prostar, with MagicRing: holds standard screws in any position thanks to spring steel ring (beginning with size 3), with spherical head: for angled screwing up to 25. Type Size / SW A B Order o SK WSD-S SK S 7-part allen key set SK-S SK S 7-part allen key set with MagicRing and spherical head: holds standard screws in any position thanks to spring steel ring (beginning with size 3), with spherical head: for angeled screwing up to 25. 2,0 2,5 3,0 4,0 5,0 6,0 8,0 SK-S MR TR S 8-part Torx TR-screw driver set with drill hole in the blade point (Tamper Resistant), for screwing of Torx and Torx -TR safety screws (centre pin in profile) TR-S Delivery times see page X.2.59

Tools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1

Tools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1 Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire