UC5105 UC5115. High technology grade for efficient turning of cast iron. Inserts suitable for steel turning now available.
|
|
|
- Charlene Walker
- 5 years ago
- Views:
Transcription
1 CVD coted gde fo ct ion. UC5105 B061E High technology gde fo efficient tuning of ct ion. Inet uitble fo teel tuning now vilble. The ltet mooth coting technology enuing tble, elible cutting.
2 New CVD coted gde fo tuning of ct ion nd ductile ct ion UC5105/ Fetue Al2O3 TiCN Stuctue of UC5105/ Newly developed All-Blck Supe-Even Cot Impoved we eitnce Dmticlly inceed we eitnce due to the thick Al2O3 (Aluminium oxide), nd the tong, fibou TiCN (Titnium Cbo Nitide) coting lye. Impoved chipping eitnce The new, moothe-thn-noml ufce coting pevent welding nd edge chipping to llow elible nd tble cutting. UC5105 With vey hd cbide ubtte nd All-Blck Supe-Even Cot. Effective fo high-peed tuning of ct nd ductile ct ion. With vey tough cbide ubtte nd All-Blck Supe-Even Cot. The fit ecommended gde fo genel tuning of ct ion, ductile ct ion nd teel. Sufce oughne compion of coting Roughne cuve (μm) (Axil mgnifiction: x5, Ltel mgnifiction: x200.00) Extemely mooth coting (mm) (mm) All-Blck Supe-Even Cot Competito CVD coting Appliction Rnge nd commended Cutting Condition TOOL NAVI SYSTEM UC5105 with high we eitnce fo continuou nd high peed tuning with n excellent blnce of toughne nd we eitnce. Alo extemely uitble fo long life, high-peed continuou tuning of teel. Negtive inet fo ct ion nd ductile ct ion Stble cutting Wokpiece Flt top Ct Ion UC5105 Flt top Stndd UC5105 Stndd UC5105 Flt top Stndd 1t commendtion (Genel cutting) Untble cutting Cutting condition Stble cutting Genel cutting Untble cutting Cutting e Light cutting Medium cutting Continuou cutting Contnt depth cutting Pe-mchined Secuely clmped component cutting Hevy inteupted cutting Iegul depth cutting Low clmping igidity (p=0.51.5mm) (p=1.54.0mm) Semi-hevy cutting (p=4.07.0mm) 1 ISO K01 K10 K20 K30 Appliction nge Gey ct ion, Ductile ct ion UC5105 K P Wokpiece Gey ct ion Ductile ct ion Cbon Steel Alloy Steel commended cutting condition Tenile tength <300MP <450MP commended cutting peed (m/min) UC (200400) 250 (150300) 300 (200400) 250 (150300) MP 230 (180300) 200 (150250) HB 300 (220370)
3 Chip beke nge fo Fo Ct Ion Cutting Beke deciption Fo Poitive lnd fo hp cutting ction. Beke deciption Stndd Fo Genel Cutting Flt lnd give high cutting edge tength. Fo Rough nd Inteupted Cutting Beke deciption Mot effective fo untble mchining Flt Top becue of the high edge tength. Beke deciption GH Fo Semi-hevy Cutting Suitble fo inteupted cutting nd emoving cle. Fo high feed cutting due to combintion of wide lnd nd lge chip pocket. Fo Efficient Beke deciption Wit wipe geomety fo high feed te in the light cutting ppliction e. SW Fo Efficient Genel Cutting Beke deciption With wipe geomety fo high feed cutting in ny ppliction e. MW Fo Steel Cutting Beke deciption Fo Genel Cutting Poitive lnd give hp cutting ction. Good chip contol in ny ppliction e. Beke deciption MH Fo Genel Cutting Flt lnd give high cutting edge tength. Good chip contol in ny ppliction e. Beke deciption MV Fo Genel Cutting Poitive lnd give hp cutting ction. Chip beke geomety uitble fo copying nd bck tuning. Good chip contol in ny ppliction e. Beke deciption SH Fo Poitive lnd fo hp cutting ction. Good chip contol in the light cutting ppliction e. Cutting Pefomnce of UC5105 / Impoved Sufce Finih Continuou cutting of low igidity, ct ion pt 70 A combintion of the UC51 gde nd the chip beke chieve good ufce finih when mchining mll dimete, ct ion pt! ø22 <Cutting condition> Inet : CNMG pp Tool : PCLNL2525M12 Cutting peed : 150m/min Feed : 0.2mm/ev Depth of cut : 1.0mm Coolnt : Wet cutting Extenl continuou cutting Stndd Chtte mk Fctue itnce Inteupted fcing of ductile ct ion (DIN GGG45) diply exceptionl chipping eitnce with n extemely elible cutting edge! 200 <Cutting condition> Inet : CN Tool : PCLNL2525M12 Cutting peed : 120m/min Feed : 0.3mm/ev Depth of cut : 1.5mm Coolnt : Wet cutting Compion of mchined ufce finihe UC511 5 Noml we Compion of mchined ufce meuement Rough ufce finih UC5105 Competito A' K10 gde Fctuing Competito B' K10 gde Fctuing Fctuing Cutting time (min) 2
4 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Inet Negtive Inet (With hole) 3 Shpe Flt Top Stndd Beke GH Beke Semi-Hevy Cutting Beke Ode Numbe CN CNMG CNMG GH -GH GH GH GH GH GH CNMG MH CNMG MH Beke MH -MH MH MH MH MH MH MH : Inventoy mintined. : Inventoy mintined in Jpn. Dimenion (mm) D2 : Non tock, poduced to ode only. Geomety
5 DN D2 DNMG CNMG MW -MW MV CNMG MV MV -MV MV MW SA CNMG-SA SH CNMG SH SH -SH CNMG SW SW SW Beke Beke (Wipe) Beke Beke Beke Flt Top Geomety Dimenion (mm) Ode Numbe Shpe (Wipe) Beke Stndd
6 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Inet Negtive Inet (With hole) 5 Shpe GH Beke Semi-Hevy Cutting Beke MH Beke MV Beke MW Beke SH Beke Ode Numbe DNMG GH GH GH GH DNMG DNMG MH MH MH MH MH MH DNMG MV MV MV MV MV MV MV MV DNMX MW MW MW MW DNMG SH SH SH SH SH SH SH Flt Top SN : Inventoy mintined. : Inventoy mintined in Jpn. : Non tock, poduced to ode only. D2 Dimenion (mm) Geomety
7 R1 6 SNMM HX HX SNMG MV MV -MV MV SNMG MH MH -MH MH MH SNMG SNMG GH -GH D2 SNMG GH MH SNMG SH SH -SH SH Beke Hevy Cutting Beke Geomety Dimenion (mm) Ode Numbe Shpe Stndd Beke Beke Semi-Hevy Cutting Beke Beke Beke
8 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Inet Negtive Inet (With hole) Shpe Ode Numbe Dimenion (mm) D2 Geomety Flt Top TN Stndd Beke TNMG GH Beke TNMG GH GH Semi-Hevy Cutting Beke GH GH TNMG MH Beke TNMG MH MH MH MH MH 1.7 MV Beke TNMG MV MV MV 7 : Inventoy mintined. : Inventoy mintined in Jpn. : Non tock, poduced to ode only.
9 VNMG MV MV MV VNMG MH MH MH TNMX MW MW VNMG D2 VNMG MW SA TNMG SA SH TNMG SH SH Beke Beke Geomety Dimenion (mm) Ode Numbe Shpe Beke Beke Beke Stndd Beke Beke
10 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Inet Negtive Inet (With hole) Shpe Ode Numbe Dimenion (mm) D2 Geomety Flt Top WN Stndd Beke WNMG GH Beke WNMG GH GH Semi-Hevy Cutting Beke WNMG MH WNMG MH Beke MH MH MV Beke WNMG MV MV MV MW Beke WNMG MW MW (Wipe) MW MW 9 : Inventoy mintined. : Non tock, poduced to ode only.
11 Shpe Ode Numbe Dimenion (mm) D2 Geomety SH Beke WNMG SH SH SH SW Beke WNMG SW SW (Wipe) Negtive Inet (Without hole) Shpe Ode Numbe Dimenion (mm) D2 Geomety Flt Top SNMN Flt Top TNMN
12 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Inet Poitive Inet (With hole) Shpe Ode Numbe Dimenion (mm) D2 Geomety Stndd Beke CCMT T304 09T MW Beke CCMT MW MW (Wipe) SW Beke CCMT SW 09T302-SW T304-SW (Wipe) Flt Top CCMW T304 09T Stndd Beke DCMT T304 11T Flt Top DCMW T T Stndd Beke RCMX1204M D2 11 : Inventoy mintined. : Non tock, poduced to ode only.
13 12 SCMW09T304 09T SCMT09T304 09T TCMW T304 16T308 D2 VCMW VCMT Geomety Dimenion (mm) Ode Numbe Shpe Beke Stndd Flp Top Flp Top Beke Stndd Flp Top
14 CVD coted gde tgeted fo tuning of ct ion nd ductile ct ion UC5105/ Poitive Inet (Without hole) Shpe Ode Numbe Dimenion (mm) D2 Geomety SPMN TPMN : Inventoy mintined. : Non tock, poduced to ode only. MMC HARTMETALL GmbH Comeniut. 2, Meebuch, Gemny Tel Fx e-mil mketing@mmchg.de MITSUBISHI TERIALS ESPAÑA, S.A. C/Empedo 2, Mueo, Vlenci, Spin Tel Fx e-mil mme@mmevlenci.com MITSUBISHI HARDMETAL RUSSIA OOO LTD. ul. Bolchj Pochtovj, d.36, t Mocow, Rui Tel Fx e-mil mmc-mocow@lecom.u MMC HARDMETAL U.K. LTD. Mitubihi Houe, Glen Cloe, Tmwoth, B77 4AS, U.K. Tel Fx e-mil le@mitubihicbide.co.uk MMC ITALIA S..l. V.le delle Indutie 20/5, Aee (Mi) Tel Fx e-mil info@mmc-itli.it MMC METAL FRANCE S.A.R.L. 6, ue Jcque Monod, Oy Cedex, Fnce Tel Fx e-mil mmfle@mmc-metl-fnce.f MMC HARDMETAL POLAND Sp. z o.o. Amii Kjowej 61, Woclw, Polnd Tel Fx e-mil mmc@mhpl.pl E( - )
B089E New CVD Coated Grade for Steel Turning Update UE6110. New insert grade provides outstanding durability.
B089E New CVD Coted Grde for Steel Turning 2007.7.Updte New inert grde provide outtnding durbility. New CVD Coted Grde for Steel Turning y Feture Superior mchining performnce chieved uing 2 in 1 technology
A revolution in stainless steel turning
A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic deformation resistance. B201E ISO insert Series for Stainless
TOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
TAW Drill. Stable performance from a versatile, changeable insert type drill. Indexable Type Drill B060G Update. H Type Insert.
06.10.Updte B060G New D holde fo the H type inset! Indexble Type Dill TAW Dill Stble pefomnce fom vestile, chngeble inset type dill H Type Inset U Type Inset High igidity gde fo longe tool life MIRACLE
Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
CONTENTS TECHNICAL CNMG/M DNMG KNUX SNMG/M TNMG VNMG WNMG
CONTENTS NEGATIVE INSERTS POSITIVE INSERTS CNMG/M 80º RHOMB PAGE 01 CCMT PAGE 08 80º RHOMB DNMG 55º RHOMB PAGE 02 DCMT PAGE 09 55º RHOMB KNUX 55º PARALLELOGRAM PAGE 0 RCMT PAGE 10 ROUND SNMG/M 90º SQUARE
TOOLS NEWS Update B194B. PVD coated Cermet grade for steel MP3025. Series Expansion. For excellent surface finishes and extended tool life.
Series Expansion TOOLS NEWS 2012.10 Update B194B PVD coated Cermet grade for steel For excellent surface finishes and extended tool life. PVD coated Cermet grade for steel Better tool life when machining
A revolution in stainless steel turning
ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic
SPK CERMETS Turning, Grooving and Milling
SPK CUTTING TOOLS VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS SPK CERMETS Tuning, Gooving n Milling AEROSPACE The eospce inusty plces extemely high emns
SPK CUTTING TOOLS. SPK CERMETS Turning, Grooving and Milling
SPK CUTTING TOOLS VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY SPK CERMETS Tuning, Gooving nd Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE The eospce industy plces extemely high demnds
MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
T5100 SERIES. For a wide range of cast iron turning applications. Keeping the Customer First. CVD Coated Grade for Grey and Ductile Cast Iron Turning
Keeping the Cusmer First Tungaloy Report No. 359-E CVD Coated Grade for Grey and Ductile Cast Iron Turning T50 SERIES For a wide range of cast iron turning applications T50 SERIES Drastically improved
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
FS/LS MS/RS. The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing.
TOOL NEW IO Turning Inserts for Difficult-to-cut Materials 2018.6 Update B214G Item Expansion The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing. MP9005 MP9015 MT9005
Burrs Burrs Table of Contents General Information Tool drive Contents Page Tool drive Contents Page Resharpening Ordering instructions
Bus Bus Tble of Contents Bus Genel Infomtion Tool dive Contents Pge Genel infomtion The fst wy to the best tool 4-5 TC bus (TC = tungsten cbide) TC bus 6-17 shnk mm shnk 6 mm shnk 8 mm Tool dive Contents
Burrs Table of contents
s s s Tble of contents Genel infomtion Contents Pge Genel infomtion 3 The fst wy to the best tool 4 Dive Contents Pge HSS oty cuttes (HSS = high speed steel) HSS oty cuttes 62 Cut ALU Cut 1 Cut 2 Cut 3
B368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING
MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING 2017.11 B368E MS DRILL SOLID CARBIDE DRILL SERIES A new choice of quality tooling for a superior cost peformance ratio. A versatile combination of reliable
Carbide Cutting Tool Specials
Valid until 19/12/2011 All prices are exclusive of VAT. Carriage may be extra Carbide Cutting Tool Specials 2011 Part off Blocks, Blades & Inserts interchangeable with GTN LGIH-Line LGIH 26-3S Blades new
Engineered for Economical Turning Performance. Engineered for. Performance NEW FLASH TURNING LINE CNMG CNMG
Engineered or Perormance Engineered or Perormance NEW COST EFFECTIVE APPROACH FLASH TURNING LINE CNMG 0904.. CNMG 1204.. www.iscar.com Engineered or Economical TURNing Perormance Small Size Cost Saving
5050 Introducing the 5050 milling grade taking toughness to new heights.
Intoducing the milling gade taking toughne to new height. UNIVERSA MIING GRADE FOR TOUGH APPICATIONS PRODUCTIVE. REIABE. VERSATIE. MAKE US PROVE IT. Tough condition? Multiple mateial? Want pedictable pefomance?
B182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS
VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
CERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
Tungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
-Specials Dimensions [mm] H 3 W L 1
![-Specials Dimensions [mm] H 3 W L 1](/thumbs/76/74443905.jpg "-Specials Dimensions [mm] H 3 W L 1")
E83/211GBP/N Specials 211 Valid until 1/12/211 All prices are exclusive of VAT. Carriage may be extra Part off Blocks, Blades & Inserts interchangeable with GTN LGIHLine LGIH 263S Blades new H 3 W L 1
ISOTURN INSERTS F 2 P WNGP ISCAR. Finish
IOTURN INERT C45MT-M inge-ided quae Insets o Finishing Appications (CHAMELEON Mutiunction Pocket ystem) 90 I 6.2 Tough 1 Had IC8150 45º Designation (mm/ev) C45MT 100508-M 9.53 5.00 0.80 4.50 0.50-3.00
Introduction. Tapered Roller Bearings. Flanged Cup Single Row Bearings (TSF Type) Single Row Bearings (TS Type) Double Cup Two Row Bearings (TDO Type)
Intoduction Tpeed olle eings Tpeed olle beings, due to tpeed cewys nd olles, hve the cpbility to suppot vious combintions of thust nd dil lods. The thust lod cpbility vies with the cup ngle; the gete the
PLAZA MIDDLE SCHOOL TRACK AND FIELD IMPROVEMENTS
TCK ND FIELD IMPOVEMENTS, THE SOUTHEST 1/4 SECTION 19, TOWNSHIP 51 NOTH, NGE 33 WEST PLTE COUNTY, MISSOUI DISTUBED E = 6.59 c. THU DOP LNE F THU DOP LNE F THU DOP LNE F THU DOP LNE F P O IN FE SS EE ST
IT.TE.DI. PCD INSERTS
PCD ISO INSERTS IT.TE.DI. REFERENCE TABLE 03 04 PRODUCT RANGE TYPE D INSERTS 06 11 TYPE C INSERTS TYPE R INSERTS 14 16 TYPE E INSERTS TYPE T INSERTS 18 22 TYPE S INSERTS TYPE W INSERTS 29 32 TYPE V INSERTS
WFX Series. Four-cornered shoulder mill for steel, stainless steel, and cast iron machining. High Performance Milling Systems. Stainless.
High Performnce Milling ystems eries our-cornered shoulder mill for steel, stinless steel, nd cst iron mchining teel tinless teel Cst Iron Grdes The type is the first series to offer the newly developed
Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
Internal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
NEW ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ ROUND INSERT CUTTER
NEW ROUND INSERT CUTTER DE6G /1DE6G DE6H /1DE6H DE6K /1DE6K ROUND INSERT CUTTER DE6G_/1DE6G_ DE6H_/1DE6H_ DE6K_/1DE6K_ Double sided / high economicl 8- resp. 16-fold indexble insert 2 different insert
Applicable for steel, stainless steel and cast iron Suitable for dry cutting
Best of 2009 E62-6/2009-GBP Valid to 21st DEC 2009 80 0 The new Black Panther - insert has arrived! Applicable for steel, stainless steel and cast iron Suitable for dry cutting The latest generation of
Mold & Die. Features INSERT SPMT RBEX. Adopts helical cutting edge Stronger insert (Thickness of RBEX 50: 4.76mm
Mold & Die Features RBEX SPMT 120408 RBEX Adopts helical cutting edge Stronger insert (Thickness of RBEX 50: 4.76mm 5.56mm) SPMT 120408 RBE SPMT 120408 RBEX Strong clamping with a large screw head Reduced
The original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
SR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
HOW TO READ THE STANDARD OF EXTERNAL TURNING TOOLS
TOOLS ooinserts TOOL HOLDERS VN DVPN DOULE CLAMP type Finish Light Medium Medium Facing, Copying FH LP MP MH HOW TO READ THE STANDARD OF TOOLS a How this section page is organized zorganized according
Applicable for steel, stainless steel and cast iron Suitable for dry cutting
Best of 2008/1 E62-6/2009-GBE Valid to 30.09.2009 The new Black Panther - insert has arrived! Applicable for steel, stainless steel and cast iron Suitable for dry cutting The latest generation of face
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
TWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
The quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
8 Turning Tools Vices. New products for machining technicians. HSS drilling. Solid carbide drilling. Indexable insert drilling
1 HSS drilling New products or machining technicians Drilling 2 3 Solid carbide drilling Indexable insert drilling 8 Turning Tools HCN 2125 - or machining stainless steels 4 5 Reaming and Countersinking
Mini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
Tungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
THREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
Tungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
INDEXABLE CUTTING TOOLS CATALOGUE
www.swisscuttools.com INDEXABLE CUTTING TOOLS CATALOGUE CONTENTS 3 / Introduction 4 / Manufacturing Process 5 / Grade Information 6 / Technical Formula 12 / Milling Inserts 18 / Milling Cutters 23 / Drilling
WAX Endmill Series. High speed, high efficiency shoulder mill for non-ferrous materials. Non-ferrous Metal
HighPerformnce Performnce Turning ystems High Milling ystems WAX Endmill eries High speed, high efficiency shoulder mill for non-ferrous mterils Non-ferrous Metl Fetures & Benefits WAX WveMill cutters
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
Grooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
HOW TO READ THE STANDARD OF BORING BARS
HOW TO READ THE STANDARD OF BARS How this section pge is orgnised zorgnised by product series. (fer to the index on the next pge.) TYPE OF BAR indictes the initil letters for the order number, s well s
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
New end mills with multiple internal holes for efficient flow of coolant. y
IMPACT MIRACLE nd mill with multipl intrnl through coolnt hols -MHV-CH -MHVRB-CH -SFPR-CH Sris -MHV-CH -MHVRB-CH -SVR-CH -MHV-CH -MHVRB-CH Nw nd mills with multipl intrnl hols for fficint flow of coolnt.
SAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
PCD and PCBN Tools. PCD Tools. PCBN Tools
PCD nd PCBN Tool PCD Tool TAC Inert for Turning... 444 TAC Inert for illing... 447 All-dimond Tipped TAC ill... 448 All-dimond Tipped TAC Endmill... 450 PCD Tipped Endmill... 45 Grinding of PCD Tool...
C007E HSK-T TOOLS HSK-T TOOL STANDARDS
C007E HSK-T TOOL STANDARDS HOW TO READ THE STANDARD OF How this section page is organised z Organised by product series. (Refer to the index on the next page.) PRODUCT TYPE indicates the first four letters
HTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards.
2015 2016 Introduction HTR Precision Cutting Tools is a wholly owned black empowered company incorporated for the purpose of manufacturing and supplying precision cutting tools, in response to the growing
DIMPLE BAR. Highly rigid and lightweight head prevents vibration for better surface finishes. Chatter Resistant Boring Bars
0. Updt Chtt sistnt Boing Bs B04 Addition of nw itms DIPLE BAR Highly igid nd lightwight hd pvnts vibtion fo btt sufc finishs. yth diffnt lngths of cbid shnk boing bs vilbl. ya wid ng of insts. yexpnsion
41set. redhen MODUL GABION SYSTEM. 41 means:
1 MODUL GABION SYSTEM redhen 41set 41 mens: module system which llows you to build vrious forms of gbion rchitecture using just few components 4 pcs. d41x68 8 pcs. n41 "while you wit order reliztion with
Up to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
Part 4 3. ANGULAR CONTACT THRUST BALL BEARINGS T. TAC 29X Series TAC 20X Series. Double Direction Angular Contact Thrust Ball Bearings (TAC Series)
Pt 4 ouble iection Angul ontct hust Bll Beings (A eies) A 29X eies A 2X eies Fo itionl infomtion: ttic equivlent lo 128 Pelo n igiity 134 φ Abutment n fillet imensions 168 Bouny imensions o (ynmic) (ttic)
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
CTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
SUMIDIA SUMICRYSTAL M1 ~ M30 SUMIDIA. Grades. SUMIDIA Series... M2 SUMIDIA DA M3. Inserts
M SUMICRYSTA M1 ~ M30 Gade Inet Hode Cutte, Endmi Di SumiCyta Seie... M2... M3 Inet... M4 BeakMate DM Type... M5 Indexabe Inet... M6 Mini Boing Too CKB Type... M18 Sma Hoe Boing Ba DABB Type... M19 Auminum
HOW TO READ THE STANDARD OF GROOVING
OW TO A T STANA O GOOVING ow this section pge is orgnized zclssified ccording to externl or internl pplictions. xsub-clssified ccording to product series. (efer to the index on the next pge.) [or xternl
PROMOTIONS. SP ECIAL OFFERS ON Additional discounts available Receive 1 cutter for free Special prices available Special prices available
PROMOTIONS valid until 30.06.2016 Turning & Milling Inserts High Feed Milling Shoulder & Face Milling Solid Carbide End Mills Drilling Threading SP ECIAL OFFERS ON Additional discounts available Receive
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
Preview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
Chain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material.
C o n v e y ing PPliCtiON Chin conveyors with endless chins with feed dogs in closed troughs re suitble for the trnsport of bulky mteril. This version of Vecopln-chin conveyors trnsports the mteril in
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
P M K N S H TOOLING NEWS E-95. New Uncoated General Purpose Cermet for Steel Turning T1500A
TOOLING NEWS E-95 P M K N S H New Uncoated General Purpose for Steel Turning For Steel Turning General Features A tough, high strength grade produced from an optimised balance of tough hard and ultra-hard
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
PREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Ultrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
HSB series the heavy-duty connectors
HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls
squareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
Roller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
No: Features MGMN-G MGMN-M MRMN-M MRGN-A
No: 96-10 MGMN-G Features - Unique W shape strong clamping system ensures stability of machining - M.G.T Insert can be used at Internal operations as well as External operations - M.G.T Insert s M chip
11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 13
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-06-03 issue 13 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
CERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
HYSTAR M16 3B 2.9(6.39) M22/M30* 5B 12.3(27.09) M24 8B 23.0(50.66) 250 (3,600) M16 2B 1.3(2.86) M16/M24* 3B 2.9(6.
-Pcwfictu hy *w #*/**» info@laanmachine.com www.laanmachine.com Specifications: Flow max. Pes. P max. Pilot Ratio Ipm ba P contol (PSI) /Pcyl. (USgpm) Flange bolts Numbe No. Dia. Pipe Size kg(lb) SVF-
CONTENTS TECHNICAL INFORMATION BEARING TABLES INTRODUCTION OF NSK PRODUCTS-APPENDICES
Rolling eings TECHNICAL INFORMATION Pges 1 TYPES AND FEATURES OF ROLLING EARINGS A 7 1.1 Design nd Clssifiction A 7 1.2 Chcteistics of Rolling eings A 7 2 EARING SELECTION PROCEDURE A16 3 SELECTION OF
Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.
No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
Aluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
Rolling Bearings Rolling B e arings
Rolling eings Technicl Infomtion Deep Goove ll gs. Angul Contct ll gs. Self-Aligning ll gs. Cylindicl Rolle gs. Tpeed Rolle gs. Spheicl Rolle gs. Thust gs. Needle Rolle gs. ll g. Units Plumme locks Cylindicl
u-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
Sumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
PRINCE PTO HYDRAULIC PUMPS Up to 40 gallons per minute and up to 2250 psi
PE PTO HYDULI PUMPS Up to 40 gallons per minute and up to 2250 psi UNIQUE FETUES: Self-adjusting wear plates on both sides of the gears. Proper size hose adapters are provided for inlet ports. Two outlet
SURFACE PROTECTION TAPES. Flexible Technology Company
SURFACE PROTECTION TAPES Flexible Technology Company Select your tape application Laser cutting Pro-Techno products are tapes for the temporary protection of any kind of surface in any kind of market during
ALMAC CU Ultra precise 3 to 5-axis machining centre
T H E R A N G E O F T O R N O S M A C H I N I N G C E N T E R S T H I N K P A R T S T H I N K T O R N O S ALMAC CU 1007 Ultra precise 3 to 5-axis machining centre THE SMALLEST OF THE BIGGEST Requiring