FUSIBLE DISCONNECT SWITCHES
|
|
|
- Kerrie Lloyd
- 6 years ago
- Views:
Transcription
1 FUSILE DISONNET SWITHES HIGHLIGHTS: Double break contacts per pole up to 400 Touch safe fuse covers/line shrouding standard Service Entrance Rated ompact Footprints Front operated switches Side operated switches Defeatable pistol handles automatically re-latch when panel door is closed - no tool necessary to reset latch Test positions available up to 400 External or direct operation handles Flange operation PPLITIONS: Service entrance or main panel disconnects up to 600V, 800 Make and reak power circuit applications on load Fusible isolation switches NFP 79 Solutions Ferraz Shawmut disconnect switches are extremely durable, manually operated, fusible disconnect switches. The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the OFF position. With safety in mind, all switches are supplied with fuse covers and line side shrouding as a standard feature. These switches provide the ultimate in short circuit protection when used with Ferraz Shawmut s lass, or L fuses. These heavy-duty switches are designed with the most up-to-date disconnect fuse and switch technology available. Designed to meet the UL98 standard, the gives you the product that makes and breaks power circuits on load. switches are tested and approved for use in the most demanding applications, such as Service Entrance. The optional TEST function (up to 400) enables testing of the control circuit auxiliaries without switching the main contacts. This function provides a simple alternative to a separately wired push button. wide array of handles are available to meet OSH padlocking requirements, NEM configurations, defeater options and NFP 79 requirements. Ratings 600 V, 250VD, 60, 100, 400, 600, and 800 amperes up to 200k Short ircuit Rating with lass,, or L Fuses pprovals ll switches meet the requirements of UL98 UL Listed Guide WHT, File E S 22.2 # 4 lass , File IE E mark Recommended fuse usage F... use with TDR*, TMR, TQR F... use with T, 4, HS FL... use with 4Q, 4, 4T * Recommended for D applications 26
2 FRONT OPERTED FUSILE DISONNET SWITHES SELET SWITH RNGE: Fusible Disconnect Switches from to 800 mperes MPERE RTING : 3 POLE : 4 POLE FUSE LSS FDT (1) FDT (1) F F4 F F4 60 F60 F604 ETERNL OPERTION NEM TPE 1,3R, 12, 4, 4 1, 3R, 12, 4, 4 IE TPE DEFETLE NO NO Red/ellow HMS HMSR HMS HMSR SELET SHFT SHFT LENGTH (inches/mm) 7.9 / / / 400 NEM TPE 1,3R, 12 1, 3R, 12 1, 3R,12 1, 3R, 12 IE TPE DEFETLE NO NO Red/ellow Red/ellow SM200-5 SM320-5 SM400-5 OR HDP HDPR HDPND HDPRND SM200-5 SM320-5 SM400-5 OR HDP HDPR HDPND HDPRND SELET SHFT SELET SHFT SHFT LENGTH (inches/mm) 7.9/ / / /500 NEM TPE 1,3R, 12 1, 3R, 12 1, 3R,12, 4, 4 1, 3R, 12, 4, 4 SHFT LENGTH (inches/mm) 7.9/ / / /500 IE TPE DEFETLE Red/ellow Red/ellow SD200-5 SD320-5 SD400-5 SD500-5 OR HGP HGPR HGP4 HGPR4 SG200-5 SG320-5 SG400-5 SG500-5 SD200-5 SD320-5 SD400-5 SD500-5 OR HGP HGPR HGP4 HGPR4 SG200-5 SG320-5 SG400-5 SG500-5 HGP HGPR HGP4 HGPR4 HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L DIRET OPERTION OPTIONS FOR ETERNL FRONT & DIRET OPERTION Terminal Lugs it (for 3 and 4 pole fuse switches) Terminal Shrouds (for 3 and 4 pole fuse switches) Shorting Links it (3 links per it) uxiliary ontacts Holder (2) (1) N/O, 10, 600V snap-on contact block, 600-Q600 (1) N/, 10, 600V snap-on contact block, 600-Q600 (1) NO+N side mount contact block, 600-N600 (2) NO+N side mount contact blocks, 600-N600 NFP 79 solutions (4) Operation of the switch (special handle) llows to operate & padlock Padlocking facility on the switch the switch when door is open HD1 HD2 HD HD6 Included (in the kit HD6) HD HD6 Included (in the kit HD6) This function can be achieved using side operated Fusible Disconnect Switches with direct handle as on page H HD8 s standard H HD8 s standard SL60 H HD8 s standard (1) ompact Design Fusible Disconnect Switch accommodates up to 4 auxiliary contacts for FDT and up to 2 auxiliary contacts for FDT on the switch (2) HD accommodates up to 4 additional auxiliary contacts for FDT and FDT H accommodates up to 8 additional auxiliary contacts Two or one can be side mounted (3) See NFP 79 requirements and our solutions page L 33 (4) HD6 requires the use of G type handle (IE: HGP) 27
3 FRONT OPERTED FUSILE DISONNET SWITHES SELET SWITH MPERE RTING : 3 POLE : 4 POLE FUSE LSS 100 F100 F F200 F F400 F F600 F FL800 FL8004 L ETERNL OPERTION NEM TPE 1,3R, 12 1, 3R, 12 1, 3R, 12, 4, 4 1, 3R, 12, 4, 4 1, 3R, 12, 4, 4 1, 3R, 12, 4, 4 IE TPE DEFETLE NO NO Red/ellow Red/ellow Red/ellow HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L HGPL HGPRL HGP4L HGPR4L HHP4F HHPR4F HHP4NDF HHPR4NDF HHP4F HHPR4F HHP4NDF HHPR4NDF SELET SHFT SHFT LENGTH (inches/mm) 7.9 / / / /500 S00-15 S00-15 SH SH DIRET OPERTION This function can be achieved using side operated Fusible Disconnect Switches with direct handle as on page HD5 HD5 OPTIONS FOR ETERNL FRONT & DIRET OPERTION Terminal Lugs it (6 lugs per kit - for 3 poles switches) (8 lugs per kit - for 4 poles switches) 3-pole Terminal Shrouds it (1) (for line or load side) 4-pole Terminal Shrouds it (1) (for line or load side) 3-pole Terminal Screen (1) 4-pole Terminal Screen (1) Shorting Links it (3 links per kit) uxiliary ontacts Holder (4) (1) N/O, 10, 600V snap-on contact block, 600-Q600 (1) N/, 10, 600V snap-on contact block, 600-Q600 (1) NO+N side mount contact block, 600-N600 (2) NO+N side mount contact blocks, 600-N600 (1) NO/N screw mount contact block (2) NO/N screw mount contact blocks NFP 79 solutions (5) llows to operate & padlock the switch when door is open Operation of the switch (special handle) Padlocking facility on the switch TL100 TL1004 TS1OOF TS1004F SL100 H HD8 s standard (1) Line side Shrouding supplied as standard with switch (2) s replacement part for line or load side (two terminal screens supplied as standard with switch) (3) s replacement part for line side (standard fuse cover also shrouds load side terminals) (4) H accommodates up to 8 auxiliary contacts Two or one can be side mounted (5) See NFP 79 requirements and our solutions page L 33 TL200 TL2004 TS2OOF TS2004F SL200 H HD8 s standard TL400 TL4004 TS4OOF (2) TS4004F (2) SL400 H HD8 s standard TL600 TL6004 TS8OOF (3) TS8004F (3) SL SWLO1 TL800 TL8004 TS8OOF (3) TS8004F (3) SL SWLO1 28
4 FRONT OPERTED FUSILE DISONNET SWITHES FUSILE DISONNET SWITHES INLUDING TEST FETURE FOR ETERNL FRONT OPERTION ONL The TEST facility enables testing of the control circuit auxiliaries without switching the main contacts. This function provides a serious technical and commercial alternative to a separately wired push button. SELET SWITH MPERE RTING : 3 POLE : 4 POLE FUSE LSS FDT (1) NEM TPE 1,3R, 12, 4, 4 1, 3R, 12, 4, 4 IE TPE DEFETLE Red/ellow HGPT4 HGPRT4 FDT (1) HGPT4 HGPRT4 FT F4T HGPT4 HGPRT4 FT F4T HGPT4L HGPRT4L 60 F60T F604T HGPT4L HGPRT4L SELET SHFT SHFT LENGTH (inches/mm) 7.9 / / / /500 SG200-5 SG320-5 SG400-5 SG500-5 SG200-5 SG320-5 SG400-5 SG500-5 OPTIONS Terminal Lugs it (for 3 and 4 pole fuse switches) Terminal Shrouds (for 3 and 4 pole fuse switches) Shorting Links it (3 links per it) uxiliary ontacts Holder (2) (1) N/O, 10, 600V snap-on contact block, 600-Q600 (1) N/, 10, 600V snap-on contact block, 600-Q600 (1) NO+N side mount contact block, 600-N600 (2) NO+N side mount contact blocks, 600-N600 HD HD H 7 8 H 7 8 SL60 H 7 8 SELET SWITH NEM TPE 1, 3R, 12, 4, 4 1, 3R, 12, 4, 4 IE TPE MPERE RTING : 3 POLE : 4 POLE FUSE LSS DEFETLE Red/ellow 100 F100T F1004T HGPT4L HGPRT4L 200 F200T F2004T HGPT4L HGPRT4L 400 F400T F4004T HGPT4L HGPRT4L SELET SHFT SHFT LENGTH (inches/mm) 7.9 / / / /500 OPTIONS Terminal Lugs it (6 lugs per kit - for 3 pole fuse switches) TL100 TL200 TL400 (8 lugs per kit - for 4 pole fuse switches) TL1004 TL2004 TL pole Terminal Shrouds it (3) (for line or load side) TS1OOF TS2OOF 4-pole Terminal Shrouds it (3) (for line or load side) TS1004F TS2004F 3-pole Terminal Screen (for line or load side) TS4OOF (4) 4-pole Terminal Screen (for line or load side) TS4004F (4) Shorting Links it (3 links per kit) SL100 SL200 SL400 uxiliary ontacts Holder (2) H H H (1) N/O, 10, 600V snap-on contact block, 600-Q600 (1) N/, 10, 600V snap-on contact block, 600-Q600 (1) NO+N side mount contact block, 600-N (2) NO+N side mount contact blocks, 600-N (1) ompact Design fusible disconnect switch accommodates up to 4 auxiliary contacts for FDT and up to 2 auxiliary contacts for FDT on the switch (2) HD accommodates up to 4 additional auxiliary contacts for FDT and FDT, H accommodates up to 8 additional auxiliary contacts, Two 7 or one 8 can be side mounted (3) Line side Shrouding supplied as standard with switch (4) s replacement part for line or load side (two terminal screens supplied as standard with switch) 29
5 SIDE OPERTED FUSILE DISONNET SWITHES RNGE: Side operated Fusible Disconnect Switches from to 400 SELET SWITH FLNGE OPERTED HNDLE (Square D type - class 9422) MPERE RTING : 3 POLE : 4 POLE FUSE LSS FSO F4SO NEM TPE IE TPE DEFETLE PDLOLE FSO F4SO (1) 60 F60SO F604SO 1, 3, 3R, 4, 12 4, 4 HF1 (2) HF2 (3) HF1 (2) HF1 (2) HF2 (3) HF2 (3) SELET LE LE LENGTH (inches/mm) 36 / / / 48 HF36 HF60 HF120 HF36 HF60 HF120 HF36 HF60 HF120 DIRET OPERTION PDLOLE HD3 HD4 HD4 OPTIONS FOR FLNGE & DIRET OPERTION HNDLE FROM TO 60 Terminal Lugs it For 3 and 4 pole fuse switches Terminal Shrouds For 3 and 4 pole fuse switches Shorting Links it (3 links per kit - for 3 pole fuse switches) uxiliary ontacts (4) (1) NO + N side mount contact block, 600-N600 (2) NO + N side mount contact blocks, 600-N600 SL60 SELET SWITH FLNGE OPERTED HNDLE NEM TPE IE TPE DEFETLE MPERE RTING : 3 POLE : 4 POLE FUSE LSS PDLOLE 100 F100SO F1004SO 200 F200SO F2004SO (1) 400 F400SO F4004SO 1, 3, 3R, 4, 12 4, 4 HF1 (2) HF2 (3) HF1 (2) HF1 (2) HF2 (3) HF2 (3) SELET LE LE LENGTH (inches/mm) 36 / / / 48 HF36 HF60 HF120 HF36 HF60 HF120 HF36 HF60 HF120 DIRET OPERTION PDLOLE HD4 HD4 HD4 OPTIONS FOR FLNGE & DIRET OPERTION HNDLE FROM 100 TO 400 Terminal Lugs it (6 lugs per kit - for 3 pole fuse switches) TL100 TL200 (8 lugs per kit - for 4 pole fuse switches) TL1004 TL pole Terminal Shrouds it (5) (for line or load side) TS100F TS200F 4-pole Terminal Shrouds it (5) (for line or load side) TS1004F TS2004F 3-pole Terminal Screen (for line or load side) 4-pole Terminal Screen (for line or load side) Shorting Links it (3 links per kit - for 3 pole fuse switches) SL100 SL200 uxiliary ontacts (4) (1) NO+N side mount contact block, 600-N600 (2) NO+N side mount contact blocks, 600-N600 (1) Flange handle includes the flange operator and the coupling mechanism to connect switch and cable together (2) ll external metal parts are sheet steel - (3) ll external metal parts are either stainless steel or a chrome-plated non-ferrous die casting (4) Two or one can be side mounted (5) Line side Shrouding supplied as standard with switch (6) s replacement part (two terminal screens supplied as standard with switch) Note: Side-external handle and shaft available, consult with factory. TL400 TL4004 TS400F (6) TS4004F (6) SL400
6 fusible DISONNET SWITHES from TO 800 UL, cul ND S TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number F / F4 F / F4 FDT FDT FT / F4T FT / F4T FSO / F4SO FSO / F4SO Rating Fuse type Operating voltage V Max horsepower rating/ Max motor FL current Three phase 208 V 5/17.5 5/17.5 5/17.5 5/ V 7.5/22 7.5/22 7.5/22 7.5/ V 15/21 15/21 15/21 15/ V 20/22 20/22 20/22 20/22 D 125 V 2 poles in series 3/25 3/25 3/25 3/25 D 250 V } except (1) 5/20 5/20 5/20 5/20 Short circuit rating with fuses k ranch circuit fuse type Max fuse rating () Dimension 3 pole (front operated switches) H in W in D in Shaft size square (front operated switches) in 0.2 x x x x 0.4 mm 5 x 5 5 x 5 10 x x 10 3-pole switch operating torque (front operation) lb. in Terminal lugs kit (# of lugs per kit) Wire range WG (# of wire holes per lug) #10-#14 (1) #10-#14 (1) #10-#14 (1) #3-#10 (1) Wire tightening torque lb. in atalog number F / F4 F / F4 FDT FDT FT / F4T FT / F4T FSO / F4SO FSO / F4SO Rating 32 D 32 D Rated Insulation voltage Ui (V) V Rated impulse voltage (Uimp) 8 kv 8 kv 8 kv 8 kv Operating current Ie () 400 V V Motor Power (kw) 400 V V V Max. peak let through current (gg) k peak onnection Minimum u cable section mm Minimum U busbar section mm 2 31
7 fusible DISONNET SWITHES from TO 800 UL, cul ND S TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number F60 / F604 F100 / F1004 F200 / F2004 F400 / F4004 F60T / F604T F100T / F1004T F200T / F2004T F400T / F4004T F600 / F6004 FL800 / FL8004 F60SO / F604SO F100SO / F1004SO F200SO / F2004SO F400SO / F4004SO Rating Fuse type L Operating voltage Max horsepower rating/ Max motor FL current Three phase 208 V 15/ / / / / / V 15/42 /80 60/ / / / V /40 60/77 125/ /2 500/ / V 50/52 75/77 150/ / / /472 D 125 V 2 poles in series 3/25 7.5/58 15/112 20/148 D 250 V } except (1) 10/38 20/38 40/140(1) 50/173(1) Short circuit rating with fuses ranch circuit fuse type L Max fuse rating () Dimension 3 pole (front operated switches) Shaft size square (front operated switches) x x x x x x x x 15 3-pole switch operating torque (front operation) Terminal lugs kit (# lugs per kit) Optional (6) Optional (6) Optional (6) Optional (6) Optional (6) Wire range WG (# of wire holes per lug) #3-#10 (1) 2/0-#14 (1) 3/0-#6 (1) 600 kcmil-#2 (2) 600 kcmil-#2 (2) 600 kcmil-#2 (3) Wire tightening torque (1) 3 pole in series IE TEHNIL HRTERISTIS FOR FRONT & SIDE OPERTION atalog number F60 / F604 F100 / F1004 F200 / F2004 F400 / F4004 F60T / F604T F100T / F1004T F200T / F2004T F400T / F4004T F600 / F6004 FL800 / FL8004 F60SO / F604SO F100SO / F1004SO F200SO / F2004SO F400SO / F4004SO Rating Rated Insulation voltage Ui (V) Rated impulse voltage (Uimp) 8 kv 8 kv 8 kv 8 kv 12 kv 12 kv Operating current Ie () 400 V V Motor Power (kw) 400 V V V Max. peak let through current (gg) onnection Minimum u cable section x 150 Minimum U busbar section 2 x 40 x 5 32
8 front OPERTED Fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) D FDT 1 1 H1 D FDT 1 1 RTING NUMER H H1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 3 P D type D type 3 P
9 SOOME front OPERTED Fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) F / FT F4 / F4T F / FT F4 / F4T F60 / F60T F604 / F604T F100 / F100T F1004 / F1004T F200 / F200T F2004 / F2004T M6: F100 / F100T F1004 / F1004T M8: F200 / F200T F2004 / F2004T H3 H RTING NUMER H H OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 3 P P P P P P P P P P
10 front OPERTED Fusible DISONNET SWITHES 400 H H3 DIMENSIONS (dual dimensions: in/mm) F400 / F400T F4004 / F4004T M H L F600 / F6004 FL800 / FL H Ø 0.43 Ø H H RTING NUMER H H1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm P P P L 4 P
11 SOOME SIDE OPERTED Fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) FSO / F4SO FSO / F4SO F60SO / F604SO F100SO / F1004SO F200SO / F2004SO M6: F100SO F1004SO M8: F200SO F2004SO H3 H RTING NUMER H H OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm 3 P P P P P P P P P P
12 SIDE OPERTED Fusible DISONNET SWITHES DIMENSIONS (dual dimensions: in/mm) 400 F400SO F4004SO M H H3 H1 RTING NUMER H H1 H3 1 1 OF POLES In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm In mm P P
13 Fusible DISONNET SWITHES HNDLES FOR ETERNL FRONT OPERTION SELETOR HNDLE TPE M " ON 1 16" ø 2.2 PISTOL HNDLE TPE D " ø 31 DOOR DRILLING 1 8" 2 ø OFF 7 8" ø ON 90 2" 50 OFF PISTOL HNDLE TPE G PISTOL HNDLE TPE H " 4 ø 4.5 DOOR DRILLING 2" 50 TEST POSITION DOOR DRILLING 65ϒ 50 2" G " " ø 31 -ON o-off 90 h h minimum dimension D D L HNDLE TPE M HNDLE TPE D HNDLE TPE G HNDLE TPE H In mm In mm In mm In mm SHFT TRIMMING LENGTH (=DIMENSION L) SELETOR HNDLE TPE M PISTOL HNDLE TPE D PISTOL HNDLE TPE G ± ±4 door door " 50 2" " G PLTE TO DOOR DISTNE WITH SHFT ETENSION (in/mm) MINIMUM DISTNE (in/mm) FDT - FDT FDT - FDT FDT - FDT ±2 door L L = -2 L = -51 min. L L = -2.5 L = min. L L = L =
14 SOOME Fusible DISONNET SWITHES PISTOL HNDLE TPE G PISTOL HNDLE TPE G F / FT F4 / F4T F / FT F4 / F4T F60 / F60T F604 / F604T F100 / F100T F1004 / F1004T F200 / F200T F2004 / F2004T 1.18 min. L L = L = - F400 / F400T F4004 / F4004T min L L = L = min max min max..5 PISTOL HNDLE TPE H F600 F6004 FL800 FL8004 L = L = -423 L HNDLES FOR DIRET FRONT OPERTION PISTOL HNDLE TPE P HD1 PISTOL HNDLE TPE P HD
15 Fusible DISONNET SWITHES PISTOL HNDLE TPE H HD HNDLES FOR DIRET SIDE OPERTION HNDLE TPE F (SHORT VERSION) HD3 R HNDLE TPE F (LONG VERSION) HD4 R
16 Fusible DISONNET SWITHES HNDLE FOR FLNGE OPERTION SQURE D TPE FLNGE HNDLE - LSS 9422 (1 & 2) TERMINL LUGS tl100 for use with ø 6.9 tl200 for use with ø 11.6 tl400 for use with ø ø tl600 for use with L 3 8 ø wire 3/0 - #6 tl800 for use with 800 L 7 16 ø wire 2/0 - #14 1 wire 600 MM wires 600 MM-2 3 wires 600MM-2 Note: 2 lugs required per terminal for 800 L 41
NON-FUSIBLE DISCONNECT SWITCHES
SIRO NON-FUSILE DISONNET SWITHES Ferraz Shawmut SIRO disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-to-date
FUSIBLE DISCONNECT SWITCHES
FUSIBLE DISCONNECT SWITCHES HIGHLIGHTS: Double break contacts per pole up to 400 A Touch safe fuse covers/line shrouding standard Service Entrance Rated Compact Footprints Front operated switches Side
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
LOAD BREAK DISCONNECT SWITCHES
S O R ISCONNCT SWITCHS Ferraz Shawmut S load break disconnect switches have been designed for today s industrial control systems. The S switches allow you to safely turn power on and off or to isolate
Load Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
SIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
MANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors
.2 Definite Purpose and Starters 5 360, Two-, Three- and Four-Pole 25 5 360, Two-, Three- and Four-Pole 25 Product Description Eaton offers the most comprehensive line of definite purpose contactors in
Motor Control. Contactors C 25 D N A 2 15 A A CATALOG SELECTION. Definite Purpose Contactors Catalog Numbering System. Contactors
Selection ompact Definite Purpose Motor ontrol TLOG SELETION Definite Purpose ing System 2 D N 2 Model = ontactor = Three-Phase Starter = Single-Phase Starter Type 2 = Non-Reversing 27 = Non-Reversing
SD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
Non-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
Table of Contents. Quick Installation Guide 2 - Disconnect Switch Installation - Disconnect Handle Installation - Cutting Connecting Rod
ulletin 494V Variable Depth Disconnect Switch Installation Instructions (Cat 494V-DS30; -DSX30 - Series D; 494V-DS; -DSX - Series D) (Cat 494V-DS00; -DSX00 - Series D; 494V-DS00; -DSX00 - Series D) TTENTION:
Disconnect Switches. The safest way to switch power on and off in your industrial control panels. K Disconnect Switches
Disconnect Switches The safest way to switch power on and off in your industrial control panels. Your problem: You need a range of disconnect switches for your industrial control requirements ranging from
Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
Contactors & Starters. Definite Purpose. Definite Purpose Contactors & Starters C-1. Contents
Definite Purpose ontactors & Starters - July 007 Definite Purpose ontactors & Starters ontents Description Page Product Family Overview pplication Description........................................ -
for Non-Fusible Disconnect Switches
Overview for Non- Disconnect Switches CDNF16 CDNF100A3 CDNF16A3, CDNF25A3, CDNF32A3 CDNF30A3, CDNF60A3, CDNF100A3 CDNF160 number 3 pole CDNF16A3 CDNF25A3 CDNF32A3 CDNF45A3 CDNF63A3 CDNF30A3 CDNF60A3 CDNF100A3
A200 NEMA Contactors and Starters A200
Starters Non-reversing and Reversing 11 Not to be used for construction purposes unless approved. Table 11. Open Reversing Starters Dimensions NEM of Poles Fig. Mounting Dimensions in Inches (mm) Screws
Motorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C)
Installation Instructions ulletin 1494F, 60, Fixed-epth isconnect Switch (at 1494F-N30; 1494F-N60; 1494F-N100; Series ) WRNING: To prevent electrical shock, disconnect from power source before installing
SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
Semiconductor (AC) fuses
PS ar sizes 9x - 500 V Main characteristics Ferraz Shawmut 500 V PS fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. These square
F-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
Contents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
T CLASS T FUSE BLOCKS
Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut
Disconnect Switches Type VBII (30-600A) with Flange Mounted Operating Handle
Features 30-600A, 600VAC and DC ratings UL Recognized (file # E121152 vol. 3) and CSA Certified under file number 15852 Visible blade quick make and break switching action Panel and Flange mounted assemblies
UL 508 Non-Fusible Disconnect Switches
UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.
UL 508 Non-Fusible Disconnect Switches
UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.
Overview for Fusible Disconnect Switches
Overview for Fusible Disconnect Switches CFD30CC3 FD800L3 CFD30AJ3 CFD60J3 CFD100J3 FD400J3 FD600J3 FD800L3 number 3 pole CFD30ACC3 CFD30AJ3 CFD60J3 CFD100J3 CFD200J03 FD400J3 FD600J3 FD800L3 General purpose
SIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
Enclosed Rotary Switch Product Specification Sheets Table of Contents
Enclosed Rotary Switch Product Specification Sheets Table of Contents Catalog No. Sheet No. Order No. SSSS-ENRSW-1005 HNF3020CJ HNF3020CJE HNF3030CJ HNF3030CJE HNF3030CX HNF3060CJ HNF3060CJE HNF3060CX
SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
GE Consumer & Industrial. M-PACT New Air Circuit Breaker A
GE onsumer & Industrial M-PT New ir ircuit reaker 400-4000 M-PT M-PT ir ircuit reaker 400-4000 1 ir circuit breakers 400-4000.4 Fixed ircuit reaker.6 Withdrawable ircuit reaker.7 haracteristics.9 State
NB1 Miniature Circuit Breaker
P-00 Modular DIN Rail Products MCB NB Miniature Circuit Breaker Color coded contact position indicator provides visual indication of the device status and insulation function Magnetic trip elements provide
General and Heavy Duty Safety Switches Accessories
eneral and Heavy uty Safety es Accessies Selection HR612 HT63 HN612 lass R use lip Kits All eneral uty and Heavy uty es are field convertible to accept lass R use lip Kits. The kits prevent the installation
SIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC
and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar
Bussmann Open and Enclosed Rotary Disconnect Switches. Exceptional Breadth and Availability for Your Application
Bussmann Open and Enclosed Rotary Disconnect Switches Exceptional Breadth and Availability f Your Application 2 Visit us on the web at www.cooperbussmann.com/disconnects Table of Contents Compact Circuit
switch disconnectors switch disconnectors fuses
SWITCHGER R switch disconnectors RB switch disconnectors fuses R switch disconnectors and RB switch disconnectors fuses are designed for distribution of electricity, making and breaking currents and protection
Fuse switch disconnectors
SWITCHGEAR RBK Fuse switch disconnectors intended for distribution of electricity and protection of electrical equipment against short-circuits and overloads, with industrial fuse links ENERGY SAFELY SWITCHED
Definite Purpose Control. Product Focus
Product Focus Innovation in Eaton s utler-hammer efinite Purpose (P) ontactors are designed to improve control of refrigeration, air conditioning, ventilation and resistance heating applications. The
Semiconductor (AC) fuses
Semiconductor () fuses PS ar sizes 9x - 500 V Main characteristics Ferraz Shawmut 500 V PS fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion
Compact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
Make-Before-Break design available in both V- and T-blade switch types. ATTRIBUTES
OEM Equipment Four-Position Sectionalizing Loadbreak Switches GENERL The ooper Power Systems fourposition sectionalizing loadbreak switch is designed for use in transformer (mineral) oil, R-Temp or Envirotemp
Section Contents. Disconnect Switches
Section Contents Page Compact Circuit Protector (CCP) fused disconnect switches....................326-329 Fused, dead front disconnect switches...........329 Fusible Disconnect Switch Overview............330
FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
Metasol MC 4pole. Contactor. Overview 108 Table of specifications 110 Dimension 114. Contents
Metasol MC Contactor Overview 8 Table of specifications 1 Dimension 114 Contents Series completion More Safe, More Valuable Contactors & Overload Relays dvanced technology & Expert solution Offering economical
1200A 3150A Non-fusible disconnect switches
Non-fusible disconnect switches FF Index Switches...40 Pistol handles....40 Shafts....40 Twisted shafts....4 : 90 Angle kit....42 Auxiliary contacts....4 Busbar connections....4 Handle support bracket....42
Fuse switch disconnectors
SWITCHGEAR 62 RBK pro Fuse switch disconnectors designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links. ENERGY SAFELY
SIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A
Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They
NEMA Contactors and Starters
NM ontactors and Starters NM N16DN0 NM Size 1 Starter.1 Freedom Series Product Overview........................................ Features, enefits and Functions............................ Standards and
Horsepower Ratings 240V AC 1 Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* Indoor Type 1 Outdoor Type 3R
Safety Switches Heavy Duty 240 Volt Indoor Type Outdoor Type 3R Horsepower Ratings 240V AC Phase, 2 Phase, 3 Phase, Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* 2 Wire 4 Wire 3 Wire System Rating
for Non-Fusible Disconnect Switches
Overview CDNF16 CDNF100A3 CDNF16A3,, CDNF32A3 CDNF30A3,, CDNF100A3 CDNF160 number 3 pole CDNF16A3 CDNF32A3 CDNF45A3 CDNF63A3 CDNF30A3 CDNF100A3 General purpose amp rating A 16 25 40 60 80 30 60 100 2 pole
SIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function
The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole
SENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
C -5 to +55 (0.8 to 1.1Uc) Permissible o
T - Line Contactors 3 & 4 Pole Contactors with C operating coils General Characteristics Type Unit TC1-D09 ~ TC1-D95 Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 VDEO 110grC/IEC 60947-4
Suitable for use as: OSHA Lockout/Tagout. disconnects. Safety switches Load break switches Isolators
SafeLine Compact, heavy duty disconnect 16A 00A 30A 00A Fusible SafeLine enclosed disconnect are designed to meet customer requirements in terms of safety, ease of installation, space savings and operational
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
Page 2-4 Page 2-8. Page Page 2-12
Page -4 Page -8 THREE-POLE CONTCTORS IEC Ith ratings in C1 duty at 40 C: 16 to 1600 IEC Ie ratings in C3 440V duty: 6 to 630 IEC Power ratings in C3 400V duty:. to 335kW UL/CS ratings: 3 to 500HP at 480V
15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
Load break switches SIRCO PV IEC 609473 new The solution for > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
FUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
Rotary cam switches A&Z series
Rotary cam switches &Z series Rotary cam switches &Z ONTNTS ONTNTS 2 GNR 3 STNDRD MOUNTING ORMS MOUNTING S 4 DIMNSION DRWINGS 5-6 OPTION XTRS 7-8 THNI DT 9 DIMNSION DRWINGS OR OPTION XTRS 10-12 ORDR SHT
footprint of traditional fusible switches
Disconnect switches Contents Section page Description Compact Circuit Protector (CCP) disconnect switches Class CC, UL supplemental and IEC 0x38mm (CCP) -3 Class CF CUBEFuse (CCP-CF) 4-5 Compact Circuit
SPEEDFAX TM 2011 Disconnect Switches Contents
SPEEDFAX TM 2011 Disconnect es Contents Compact Non-Fusible es Rotary and Toggle Selection 5-2 5-4 Dimensions and Wire Ranges 5-5 Type VBII (30-600A) Features and Ordering Information 5-6 and Handle Selection
Section A Busway
Section 8 800 5000 usway usway atalog Numbering System Section 8 800 5000 usway usway atalog Numbering System atalog numbers are composed of two basic parts the prefix (as below), plus the suffix of each
.1 NM ontactors and Starters Product Overview starters and contactors feature a compact, space-saving design, using state-of-the-art technology and th
NM ontactors and Starters NM N16N0 NM Size 1 Starter.1 Product Overview.............................................. Features, enefits and Functions.................................. Standards and ertifications......................................
NEMA Contactors and Starters
NM ontactors and Starters NM N16N0 NM Size 1 Starter NM Size 1 ontactor.1 Product Overview.............................................. 242 Features, enefits and Functions..................................
SIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
Vistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
FUSIBLE DISCONNECT SWITCHES (UL98) GM SERIES
FUSIBLE DISCNECT SWITCHES (UL98) GM SERIES Three-pole disconnect switches with fuse holder (UL98) GMF...030 C12 GMFJ 100 C03 GMFJ 400 C03 GMFJ 800 C03 Add-on blocks GMX10 10 GMX3... GMX8 00 GMX8 01 GMX5...
Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
ENCLOSED DISCONNECT SWITCHES
Ferraz Shawmut Enclosed isconnect es are designed to meet customer s requirements for compact and durable individual disconnecting means. Both fusible and non-fusible versions are available in a variety
Switch Disconnectors
Switch Disconnectors Reversible terminals allow the same switch body to be used in both front & rear mount applications 25A - 32A - 50A - 63A - 80A - A versions available Neutral pole, additional poles
SIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points
Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity
TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
PowerLine OS Switch Fuses A, 690V
Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected
FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
+ + + OS400J03 + OXP12X280 + OHB145J12 + OZXA-24. UL general purpose amp rating. UL Fuse Type 600V Catalog number Catalog number Catalog number
Disconnect Base & DIN rail mounted 1200A For a complete assembly, please select one of each: 1 switch (page.22) 1 handle (page.) 1 shaft (page.32) 1 terminal lug kit (page.34) NOTE: For additional accessories,
Rotary limit switches FCR FGR series
Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches. 0 Rotary limit switches FCR
Fusible. Fusible disconnect switches 30A 1200A, 600VAC. Phone: Fax: Web: -
disconnect A 1200A, 600VAC Disconnect Disconnect ABB PowerLine includes seven different amperage sizes from A to 1200A. All ABB fusible are designed to meet customer requirements in terms of high interrupting
Phone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
Disconnect Switches Product Guide
Disconnect Switches Product Guide Rotary Switches Non-fused Fused Enclosed Rotary Operating Mechanisms Accessories December 4 Disconnect Switches 1 Manual Motor Disconnect Switches Contents Description
Semiconductor Fuses Microswitches & Studs
MICROSWITCH SYSTEMS ADAPTED TO THE FOLLOWING FUSES: - PSC sizes 0,,, / 70, 7, 7, 7 - Blade-type PSC (PA) sizes 0-, - / 70, 7, 7, 7 - PSC sizes 000 / 00 New MS L -5 B6 MS PA -5 HIGHLY RESISTANT STUDS OFFERING
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
L O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR
L O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR The safest way to switch power on and off in your industrial control panels. Your problem: You
Contactors & Overload relays
Contactors & Overload relays Metasol MC 3P 18 to 100 MC type Magnetic Contactors Frame size screws clamp terminals Number of poles Rated operational voltage, Ue Rated insulation voltage, Ui Rated frequency
General Characteristics
from 63 to 31 lbs_037_b he solution for > ain switchboard > Distribution panel > mergency switching > us tie unction he L ensures making and breaking on load and security breaking of any low voltage electrical
TeSys GS. Data for Designers. Contents
TeSys GS Technical Data for Designers Contents Characteristics: > switch-disconnector... B5/16 to B5/21 > auxiliary contacts...b5/22 Dimensions... B5/23 to B5/31 Schemes...B5/31 B5/15 Characteristics -
For Type 2, No Damage circuit protection in all the configurations you need. A Amp-Trap 2000 Fuses
mp-trap 2000 Fuses For Type 2, No Damage circuit protection in all the configurations you need. Your problem: You need maximum overcurrent protection to prevent costly damage to today s highly sensitive
Low Voltage Products. Catalog. Flange Handle Operated Disconnect Switches. Non Fusible 30A A Fusible 30A - 800A
Low Voltage Products Flange Handle Operated Switches Non Fusible 0A - 0A Fusible 0A - 800A Flange Handle Operated Switches Non Fusible 0A - 0A Fusible 0A - 800A 7 Page Shaft operated Cable operated Amp.
SIRCO M and MV Universal load break switches from 16 to 160 A
SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV
SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
Disconnect Switches Compact, Heavy-Duty
Table of Contents Bussmann Disconnect Switches Compact, Heavy-Duty Table of Contents Fusible Disconnect Switches...Page 2 Fusible Non-Fusible Disconnect Switches...Page 29 Non-Fused Enclosed Fusible Disconnect
Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter