LOAD BREAK DISCONNECT SWITCHES
|
|
- Annabella Eileen Ray
- 6 years ago
- Views:
Transcription
1 S O R ISCONNCT SWITCHS Ferraz Shawmut S load break disconnect switches have been designed for today s industrial control systems. The S switches allow you to safely turn power on and off or to isolate a particular circuit within the panel. These switches are extremely compact and offer a variety of mounting options like IN rail mounting, base mounting, or mounting. wide assortment of handles, shafts and accessories are available to provide you with the ultimate flexibility in the design of your industrial control panels. Wiring terminations are integral to the switch body and recessed to insure a finger safe environment according to standards to an IP20 grade of protection. HIGHIGHTS: Finger Safe Compact footprint IN rail or base mount standard oor mounting optional Choice of external handles/shafts irect mount handle option Toggle handle option PPICTIONS: On/Off switching and disconnect applications in circuits up to 600 volts, 125 amperes on the load side of branch circuit protection fusing. S M range: Motor Controller S R & T range: Motor Controller suitable as Motor isconnect Motor Isolator General Purpose Ratings 600 VC 16, 20, 25,, 40, 60, 80, 100, and 125 amperes pprovals Meets the requirements of U 508 U isted Guide NRV File cu isted Guide NRV7 File CS C22.2 No 14 CC rule (3) (b) as load break disconnector
2 S M SCT SWITCH O R ISCONNCT SWITCHS S RNG: oad reak isconnect Switches from 16 to 125 mperes MPR RTING : 3 PO 16 SM16 20 SM20 25 SM25 SM SCT HN 1,3R, 12, 4, 4, 4, 4 FT CO SCT SHFT SCT HN SHFT NGTH (inches/) 2.75 / / / / 5 1,3R, 12 1, 3R,12 FT CO N N N N N N N N SCT SHFT SHFT NGTH (inches/) 4.72/ / / /400 SCT HN 1,3R, 12 1, 3R,12, 4, 4, 4, 4 FT CO SCT SHFT SHFT NGTH (inches/) 4.72/ / / /400 OPTIONS Modular 4th power pole (rating same as switch) Neutral pole (feed through, not switched, rated, 480VC) Ground pole (feed through, not switched, rated, 480VC) (1) +NC, side mount, pre-break auxiliary contact, 0, rated 120 VC Terminal shroud (for 3 pole switch) Terminal shroud for modular 4th pole or NMM or GMM irect mounted handle (requires removing collar from switch) OTHR VRSIONS VI: Switch with irect Mounted Handles MPR RTING : 3 PO oor mounted switches MPR RTING : 3 PO PPM16 NMM GMM CMM TSSM TSSM4 H60M PPM20 NMM GMM CMM TSSM TSSM4 H60M PPM25 NMM GMM CMM TSSM TSSM4 H60M PPM NMM GMM CMM TSSM TSSM4 H60M 16 SM16H 20 SM20H 25 SM25H SMH Please consult factory for availability of switches with direct mounted handles. Options same as above. 16 SM16 20 SM20 25 SM25 SM SCT HN 1,3R, 12, 4, 4, 4, FT CO OPTIONS Modular 4th power pole (rating same as switch) Neutral pole (feed through, not switched, rated, 480VC) Ground pole (feed through, not switched, rated, 480VC) (1) +NC, side mount, pre-break auxiliary contact, 0, rated 120 VC PPM16 NMM GMM CMM PPM20 NMM GMM CMM PPM25 NMM GMM CMM Note: ll -5 shafts have interlock pinned at factory (no assembly required) PPM NMM GMM CMM
3 S R & T O R ISCONNCT SWITCHS SCT SWITCH MPR RTING : 3 PO : 4 PO SR SR4 40 SR40 SR SR60 80 SR SR SR125 SCT HN 1,3R, 12, 4, 4, 4, 4 FT CO SCT SHFT SCT HN SHFT NGTH (inches/) 2.75 / / / / 5 1,3R, 12 1, 3R,12 FT CO N N N N N N N N N N N N SCT SHFT SHFT NGTH (inches/) 4.72/ / / /400 SCT HN 1,3R, 12 1, 3R,12, 4, 4, 4, 4 FT CO SCT SHFT SHFT NGTH (inches/) 4.72/ / / /400 OPTIONS (1) uxiliary contact rated 10, 600VC, 600-Q600 (1) NC uxiliary contact rated 10, 600VC, 600-Q600 uxiliary contact holder: 3 pole (accoodates up to 6 auxiliary contacts) 4 pole (accoodates up to 6 auxiliary contacts) oor mounting kit for SR switches (order switch and or separately) irect mounted handle (requires removing collar from switch) CHS1 CHS14 MSR H40R CHS1 CHS14 MSR H40R CHS2 MSR H80R CHS2 MSR H80R CHS2 MSR H80R CHS2 MSR H80R OTHR VRSIONS VI: Switch with irect Mounted Handles (includes escutcheon plate for lockout capabilities) MPR RTING : 3 PO SRH SR40H SR60H SR80H : 4 PO SR4H SR404H Please consult factory for availability of switches with direct mounted handles. 100 SR100H 125 SR125H Toggle style MPR RTING : 3 PO : 4 PO ST ST4 40 ST40 ST404 Optional IN escutcheon plate for lockout capabilities. : 3 PO CP40T CP40T : 4 PO CP40T4P CP40T4P (No lockout capability for 4 pole) 60 ST60 80 ST80 Note: ll -5 shafts have interlock pinned at factory (no assembly required) CP80T CP80T 100 ST100 CP80T 125 ST125 CP80T
4 S M O R ISCONNCT SWITCHS S M Rating pproval U508/cU U508/cU U508/cU U508/cU Short-circuit rating k at 600 V C w/fuse ranch circuit fuse type R5 R5 R5 R5 Max fuse rating () Maximum U Horsepower 208V C ratings (3-ph) V C V C V C Maximum U Horsepower 120 V C ratings (1-ph) 240 V C C ratings 125 V C pole in series Terminal lugs wire type Cu Cu Cu Cu wire size (solid) #10-#14 #10-#14 #10-#14 #10-#14 wire size (stranded) #6-#14 #6-#14 #6-#14 #6-#14 Weight (lb) TCHNIC CHRCTRISTICS S M THRM CURRNT Ith (40 C) Rated insulation voltage Ui (V) Rated impulse withstand Uimp (kv) OPRTION CURRNT () 400 V C C C V C C C V C C C MOT POWR (W) 400 V C C V C C V C C OVRCURRNT CPCITY Short-circuit current with gg fuses (k Rms) Maximum rating for associated gg fuses () Cut-off current (k peak) Short-time withstand current Icw 1s (k) MCHNIC NURNC (# of operations) CONNCTION Cu ( 2 ) 3p/4p 1.5 to to to to 16 Note: 4-pole made by using modular 4th pole (see options, page 3, ie PPM16 or PPM16)
5 S R & T O R ISCONNCT SWITCHS from TO 125 U N CS TCHNIC CHRCTRISTICS F S R & S T RNG MOT CONTROR SUIT S MOT ISCONNCT S R & S T Rating (1) 40 (1) pprovals U508/CS M U508/CS M U508/CS M U508/CS M U508 M U508 (2) Short-circuit rating k at 600 V C w/fuse ranch circuit fuse type R5 R5 or R5 or R5 or R5 or R5 Max fuse rating () Maximum U Horsepower 208V C ratings (3-ph) V C V C V C Maximum U Horsepower 120 V C ratings (1-ph) 240 V C C ratings 125 V C pole in series Terminal lugs wire type Cu Cu Cu Cu Cu Cu wire size (solid) #10-#14 #10-#14 #10-#14 #10-#14 #10-#14 #10-#14 wire size (stranded) #4-#14 #4-#14 #1-#14 #1-#14 #1-#14 #1-#14 Weight (lb) (1) Consult factory for approvals of 4 pole ratings (2) U508 Motor Controller only TCHNIC CHRCTRISTICS S R & S T THRM CURRNT Ith (40 C) Rated insulation voltage Ui (V) Rated impulse withstand Uimp (kv) OPRTION CURRNT () 400 V C C C V C C C V C C C MOT POWR (W) 400 V C C V C C V C C OVRCURRNT CPCITY Short-circuit current with gg fuses (k Rms) Maximum rating for associated gg fuses () Cut-off current (k peak) Short-time withstand current Icw 1s (k) MCHNIC NURNC (# of operations) CONNCTION Cu ( 2 ) 3p 1.5 to to to to to 35-4p 1.5 to to
6 S O R ISCONNCT SWITCHS IMNSIONS (dual dimensions: in/) S M - S MOUNTING 2.66 / / / / T1 4T2 6T3 4th power pole 0.51 / 13 S R - S MOUNTING Ø 0.47 / / Ø 0.47 / / Ø 0.47 / / poles RTING S M 16 S M 20 S M 25 S M S R S R 40 S R 60 S R 80 S R 100 S R 125 NUMR OF POS 3 P P P P
7 S O R ISCONNCT SWITCHS IMNSIONS (dual dimensions: in/) S R IMNSIONS WITH UIIRY CONTCTS S R 1-2 C (in/) 3-4 C 5-6 C 1-2 C 3-4 C 5-6 C poles / / / / / / / / / 142 Note: uxiliary contacts can be used with external operation only. S T (TOGG STY) - S MOUNTING poles / 8 mounting ear / 8 mounting ear / 8 mounting ear
8 S O R ISCONNCT SWITCHS HNS F TRN FRONT OPRTION SCT HN M F S M N S R PISTO HN F S M N S R " ON 1 16" ø " ø 31 O RIING 1 8" 2 ø OFF 7 8" ø ON 90 2" 50 OFF PISTO HN G F S M N S R O RIING " 4 ø 4.5 2" " " ø 31 -ON o-off 90
9 SOCOMC S O R ISCONNCT SWITCHS ackplate to ISTNC with shaft TNSION (in/) SCT HN M - SHFT TRIMMING NGTH (= IMNSION ) S M (16 up to ) S R ( up to 40 ) S R (60 up to 125 ) ± ±2 = = -34 = = -39 PISTO HN - SHFT TRIMMING NGTH (= IMNSION ) S M (16 up to ) S R ( up to 40 ) S R (60 up to 125 ) ± ±1 = = -28 = -1. = -33 PISTO HN G - SHFT TRIMMING NGTH (= IMNSION ) S M (16 up to ) S R ( up to 40 ) S R (60 up to 125 ) ± ±1 = = -20 = =
MANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
More informationNON-FUSIBLE DISCONNECT SWITCHES
SIRO NON-FUSILE DISONNET SWITHES Ferraz Shawmut SIRO disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-to-date
More informationFUSIBLE DISCONNECT SWITCHES
FUSILE DISONNET SWITHES HIGHLIGHTS: Double break contacts per pole up to 400 Touch safe fuse covers/line shrouding standard Service Entrance Rated ompact Footprints Front operated switches Side operated
More informationFUSIBLE DISCONNECT SWITCHES
FUSIBLE DISCONNECT SWITCHES HIGHLIGHTS: Double break contacts per pole up to 400 A Touch safe fuse covers/line shrouding standard Service Entrance Rated Compact Footprints Front operated switches Side
More informationNon-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
More informationContact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
More informationLoad Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More informationSD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
More informationSIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
More informationCylindrical fuse-link
Cylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity Characteristics ody material 00 V AC, 00 V AC, 90 V AC CH 8 - A/00 V CH 0,- A/00 V, 0-3 A/00 V CH
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationUL 508 Non-Fusible Disconnect Switches
UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.
More informationUL 98 Fusible Disconnect Switches
UL 98 Fusible isconnect witches ICONNECT WITCHE Mersen s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are service entrance devices capable of fully
More informationUL 508 Non-Fusible Disconnect Switches
UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.
More informationRSC09 RSC16 RSC22 RSC38 RSC43 RSC63 RSC-AUX
IEC-Contactor RSC 1 Features Rated operational current 9 63 (C-3) Coil voltages C 24, 230V 3 main contacts and auxiliary contact Extendable with auxiliary contact block Mounting position any 2 Description
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationAF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationEuroload Changeover Switch
Euroload Features: Quick make & quick break mechanism. High electrical & mechanical endurance. Advance neutral. Enclosed housing to avoid dust ingress. Staggered terminals upto 800A. Load and Line reversibility.
More informationChangeover & Bypass Sw it ches
Changeover & Bypass Switches St ate of the art Manufacturing Facilit ies Haridw ar, Noida Ph-I & Noida Ph-II Plant Changeover & Bypass Sw it ches Introduction On Load Changeover Switches (with & without
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More informationA compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.
PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants
More informationGE Consumer & Industrial. M-PACT New Air Circuit Breaker A
GE onsumer & Industrial M-PT New ir ircuit reaker 400-4000 M-PT M-PT ir ircuit reaker 400-4000 1 ir circuit breakers 400-4000.4 Fixed ircuit reaker.6 Withdrawable ircuit reaker.7 haracteristics.9 State
More informationSIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC
and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationSection Contents. Disconnect Switches
Section Contents Page Compact Circuit Protector (CCP) fused disconnect switches....................326-329 Fused, dead front disconnect switches...........329 Fusible Disconnect Switch Overview............330
More informationBussmann Open and Enclosed Rotary Disconnect Switches. Exceptional Breadth and Availability for Your Application
Bussmann Open and Enclosed Rotary Disconnect Switches Exceptional Breadth and Availability f Your Application 2 Visit us on the web at www.cooperbussmann.com/disconnects Table of Contents Compact Circuit
More informationC -5 to +55 (0.8 to 1.1Uc) Permissible o
T - Line Contactors 3 & 4 Pole Contactors with C operating coils General Characteristics Type Unit TC1-D09 ~ TC1-D95 Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 VDEO 110grC/IEC 60947-4
More informationSIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A
Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented
More informationEnclosed Rotary Switch Product Specification Sheets Table of Contents
Enclosed Rotary Switch Product Specification Sheets Table of Contents Catalog No. Sheet No. Order No. SSSS-ENRSW-1005 HNF3020CJ HNF3020CJE HNF3030CJ HNF3030CJE HNF3030CX HNF3060CJ HNF3060CJE HNF3060CX
More informationCompact Circuit Protector (CCP)
Supersedes April 2014 UL Class CC, CF (CUBEFuse ), Midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-Pole Class CC, Midget, 10x38mm Description & Specifications....
More informationSIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
More informationProduct brochure. ABB Fusegear EasyLine Fuse switch disconnector
Product brochure ABB Fusegear EasyLine Fuse switch disconnector 2 EasyLine Fuse Switch Disconnector ABB Fusegear Content Fuse protection 4 Technical Data 5 General 6 Apparatus overview 7 Electronic Fuse
More informationPhone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
More informationSwitch Disconnectors
Switch Disconnectors Reversible terminals allow the same switch body to be used in both front & rear mount applications 25A - 32A - 50A - 63A - 80A - A versions available Neutral pole, additional poles
More informationShort-circuit current limiter S800-SCL-SR
Short-circuit current limiter S800-SCL-SR 2 ABB Short-circuit current limiter S800-SCL-SR Self-resetting current limiting module S800-SCL-SR is ABB s innovative self-resetting current limiting module which
More informationModular contactors and relays
pages /4 to / pages /8 and /9 pages /10 and /11 pages /12 and /13 Presentation and standards Presentation Designed for use in modular panels and enclosures, these contactors feature : i Easy installation
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440
More informationAF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits
More informationAF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationNon-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.
More informationDCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC
More information25A 25A 32A 40A 40A 63A 63A 80A
ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A
More informationCompact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
More informationSwitches for photovoltaic applications Disconnect switches, UL OTDC_U from 16 to 32 Amperes
Switches for photovoltaic applications Disconnect switches, UL OTDC_U from 16 to 32 Amperes OTDC16...32U - Compact efficiency OTDC from 16 to 32 amperes offers various DC voltage ratings and a control
More informationATyS t M - ATyS g M Automatic Transfer Switching Equipment from 40 to 160 A
TyS t M - TyS g M utomatic Transfer Switching Equipment Transfer switches new The solution for > High Rise uildings > Data centre > Healthcare buildings TyS g M I-0-II P atys-mg_001_b_1_cat Function TyS
More informationCompact Circuit Protector (CCP)
Supersedes March 2016 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail 2011/65/EU Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description
More informationCompact Circuit Protector (CCP) 1-, 2- and 3-pole Class CC, Midget, 10x38mm
Supersedes October 2015 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description and
More informationGeneral information about motor protection
Application guide General information about motor protection Typical construction of a motor starter Disconnect Switch UL 98 - UL489 CSA C22.2 # 4 CSA C22.2 # 5 Fuses SIRCO Non-Fusible Disconnect Switch
More informationCam Switch. Rish Cam 16A Rish Cam 32A Rish Cam 100A. Rish Cam 10A Rish Cam 25A Rish Cam 63A Rish Cam 200A. Rish Cam 6A Rish Cam 20A Rish Cam 40A
Rishabh's New Rish Cam I,C,M &INS rotary cam Switches offer a complete range of cam switches for control, Instrumentation and motor starting applications, maximizing the benefits and optimizing your use
More informationGeneral Characteristics
from 63 to 31 lbs_037_a he solution for > ain switchboard > Distribution panel > Emergency switching > us tie Function he CEC ensures making and breaking on load and security breaking of any low voltage
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More informationCompact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
More informationCylindrical fuse-link
ylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity haracteristics Body material 00 V A, 500 V A, 90 V A H 8-5 A/00 V H 0,5- A/500 V, 0-3 A/00 V H -5
More information70 RT HP SWITCH DISCONNECTORS IN PLASTIC BOX
70 RT HP SWITCH DISCONNECTORS IN PLASTIC BOX SWITCH DISCONNECTORS IN METAL BOX ATEX SWITCH DISCONNECTORS IN METAL BOX The switch disconnectors in plastic boxes, which are available in control or emergency
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
More informationCompact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
More informationMULTIVERT 1000A Main Incomer, 690VAC
IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors. They are designed
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationMSW. MSW Catalog Number Sequence. Standard Features MSW 25 B- 3
Introducing the New WEG Series. The was developed according to IEC 60947-3 & UL508. The compact, reliable design of the allows the operator to safely disconnect power and isolate the circuit within the
More informationSIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
More informationCompact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
More informationAF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationIndustrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
More informationL O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR
L O W V O L T A G E DISCONNECT SWITCHES G LO B A L L I N E OF PREMIUM C O M PA C T LOW VOLTAGE SWITCHGEAR The safest way to switch power on and off in your industrial control panels. Your problem: You
More informationSwitch-disconnectors OTDC and OTDCP Switches for photovoltaic applications
Protection and Connection -disconnectors OTDC and OTDCP for photovoltaic applications -disconnectors OTDC and OTDCP for photovoltaic applications DC swi-disconnectors Premium performance for DC applications
More informationSeries L7 Disconnect Switches (to 315A)...L29 Technical Information...L36 Dimensions...L38
Series 7 Motor (to 100A)...2 Series 7 Enclosed (to 100A)...14 Technical Information...18 Dimensions...22 Series 7 (to 315A)...29 Technical Information...36 Dimensions...38 Series 10 Fusible and Non-Fusible...45
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationDPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
More informationLV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity
LV switch-disconnectors Catalogue Merlin Gerin 40 to 2500 A We do more with electricity LV switch-disconnectors The various low-voltage applications 2 from 40 to 2500 A 4 Compact from 80 to 1250 A 5 Masterpact
More informationLoad Break Switches 20 to 1600 A
Load Break Switches 20 to 1600 A Easy mounting and safety Load break switches with visual breaking from 20 to 125A, 100 to 400A and 125 to 1600A, are easy to mount directly on DIN rail. The advantages
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationProduct index. 4 - Manual motor protectors. Phone: Fax: Web: -
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
More informationSIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points
Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity
More informationEnclosed DC rated switch-disconnectors OTDCP from 16 to 32 Amperes
Protection and Connection Enclosed DC rated switchdisconnectors OTDCP from 16 to 32 Amperes Enclosed OTDC switches from 16 to 32 Amperes meet the demanding requirements of photovoltaic applications. Enclosed
More informationSwitches disconnectors with fuse-holders. XNF series TF series
Switches disconnectors with fuse-holders XNF series TF series Quick Reference Switch-disconnectors with fuse-holders XNF series TF series XNF Series page 155 16 32A with fuse holders 3 4 Pole Auxiliary
More informationGV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
More informationProduct Specification Sheet #3LD2.1
Product Specification Sheet #3LD2.1 Enclosed Non-Fusible Rotary Disconnect Switch 16 30 Amp, Type 12K Industrial and Type 4X Non-Metallic Enclosures General Information and Horsepower Ratings Shipping
More informationSIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
More informationProduct index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
More informationCOMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationSystem pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
More informationfootprint of traditional fusible switches
Disconnect switches Contents Section page Description Compact Circuit Protector (CCP) disconnect switches Class CC, UL supplemental and IEC 0x38mm (CCP) -3 Class CF CUBEFuse (CCP-CF) 4-5 Compact Circuit
More informationMULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
More informationAbout us. Switchgear Factory, Mumbai
About us Larsen & Toubro is a technologydriven USD 8.5 billion company that infuses engineering with imagination. The Company offers a wide range of advanced solutions in the field of Engineering, Construction,
More informationSemiconductor (AC) fuses
PS ar sizes 9x - 500 V Main characteristics Ferraz Shawmut 500 V PS fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. These square
More informationCATALOG. EasyLine XLP Fuse Switch Disconnector poles
CATALOG EasyLine XLP Fuse Switch Disconnector 1-2-3-4 poles 2 E A S Y L I N E X L P F U S E S W I TC H D I S C O N N E C TO R 1-2 - 3-4 P O L E S Contents 004 005 Introduction EasyLine XLP 006 007 Introduction
More informationMPW Series. MPW Catalog Number Sequence. Standard Features MPW U004
Series The WEG Series Manual provide a very compact solution for operation and protection in motor control applications. The NEC requires four functions to be considered a combination motor starter:, ranch,
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationOvercurrent releases - description, specifications, characteristics specifications specifications description...
BA5*37 COMMERCIAL INFORMATION Type designation specification for ordering...68 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More informationLow Voltage Switches. Switches Motorized change-over switches OTM _C
Low Voltage Switches Switches Motorized change-over switches OTM...12_C II I OTM 12_C Improves your permance OTM II I 0 OFF ON I 0 OFF II I ON I ssembly made easy Bridging bars quick wiring Tunnel terminals
More informationNF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101428D0201 28/03/11 -.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
More information