TeSys GS. Data for Designers. Contents
|
|
- Pierce Horton
- 5 years ago
- Views:
Transcription
1 TeSys GS Technical Data for Designers Contents Characteristics: > switch-disconnector... B5/16 to B5/21 > auxiliary contacts...b5/22 Dimensions... B5/23 to B5/31 Schemes...B5/31 B5/15
2 Characteristics - TeSys GS EC switch-disconnector- for use with NFC or DN From 32 to 1250 A Switch-disconnector-fuse characteristics Type GS1 DD GSp F GSp G GSp J Environment Conforming to standards Switch-disconnector- EC Fuses EC and 2 Product certifications Degree of protection conforming to EC Ambient air temperature around the device Flame resistance conforming to EC n front panel with terminal P 20 covers Storage C peration C ASEFA/LVAG, LRS (pending) Body C Fuse cover C 850 Pole characteristics Conventional thermal current (th) A for ambient temperature y C Fuse size 10 x x 51 T00C 22 x 58 Rated insulation voltage (Ui) V Rated impulse withstand voltage (Uimp) kv Rated operational current (e) Cat. AC-23A/B (1) a 0 V A a 500 V A a 690 V A (3) Cat. DC-23A/B (1) c 4 V (2) A Rated operational power Cat. AC-23A/B (1) a 0 V kw a 500 V kw a 690 V kw Rated conditional short-circuit current rms at a 0 V with ka protection by gg (gl) Rating of associated A Peak value of permissible current (dynamic short-circuit withstand) Conforming to EC a 0 V ka Rated making capacity rms at 0 V Cat. AC-23B A Rated breaking capacity rms at 0 V Cat. AC-23B A Mechanical durability Number of operating cycles Electrical durability Number of operating cycles 1500/ / / /300 cat. AC/DC-23A/B (1) Cabling Cable (c.s.a. min/max) mm 2 2.5/16 6/25 10/25 25/95 Bars (max width) mm 20 Tightening torque N.m (1) Category A : frequent operating cycles, category B : infrequent operating cycles. (2) 2 poles in series per phase. (3) With terminal covers. (4) Poles not juxtaposed. B5/16
3 GSp K GSp KK GSp LL GSp L GSp N GSp QQ GS2 S GS2 V EC EC and 2 ASEFA/LVAG, LRS (pending) P x 58 T00 T00 T0 T1 T2 T3 T (3) 100 (3) 125 (3) 125 (3) 250 (3) 250/ / /315 (4) 0/630 (4) / /0 0/ (50) (160) / / / / / / / /100 35/95 35/95 50/95 50/95 95/2 185/2 2 x 150 / 2 x / 4 x B5/17
4 Characteristics - TeSys GS EC switch-disconnector- for use with BS From 32 to 1250 A Switch-disconnector-fuse characteristics Type GS1 DDB GS2 DB GS2 GB GS2 JB Environment Conforming to standards Switch-disconnector- EC Fuses EC and 2 Product certifications Degree of protection conforming to EC n Front panel, with terminal covers ASEFA/LVAG, LRS (pending) P 20 Ambient air temperature around the device Flame resistance conforming to EC Storage C peration C Body C 960 Fuse cover C 850 Pole characteristics Conventional thermal current (th) A for ambient temperature y C Fuse size A1 A1 A2-A3 A4 Ø y 31 mm Rated insulation voltage (Ui) V Rated impulse withstand voltage (Uimp) kv Rated operational current (e) Cat. AC-23A/B (1) a 0 V A a 500 V A a 690 V A (4) Cat. DC-23A/B (1) c 4 V (2) A Rated operational power Cat. AC-23A/B (1) a 0 V kw a 500 V kw a 690 V kw Rated conditional short-circuit current rms at a 0 V with ka protection by gg (gl) Rating of associated A Peak value of permissible current (dynamic short-circuit withstand) Conforming to EC a 0 V ka Rated making capacity rms at 0 V Cat. AC-23B A Rated breaking capacity rms at 0 V Cat. AC-23B A Mechanical durability Number of operating cycles Electrical durability Number of operating cycles 1500/ / / /300 cat. AC/DC-23A/B (1) Cabling Cable (c.s.a. min/max) mm 2 2.5/16 6/25 10/25 25/95 Bars (max width) mm 20 Tightening torque N.m (1) Category A : frequent operating cycles, category B : infrequent operating cycles. (2) 2 poles in series per phase. (3) Fit switch-disconnector- GS2 LB with B1 or B2 and GS2 LLB with A4. (4) With terminal covers. (5) Poles not juxtaposed. B5/18
5 GS2 LB or LLB (3) GS2 MMB GS2 NB GS2 PPB GS2 QQB GS2 SB GS2 TB GS2 VB EC EC and 2 ASEFA/LVAG, LRS (pending) P A4. B1-B2 (3) B1-B2 B1 B3 B1 B3 B1 B4 C1-C2 C1 C3 D (4) 200/160 (4) 250 (4) 250/315 (4) 250/ / /315 (5) 0/630 (5) / / / /0 0 0/ / / / / / / / /100 50/95 95/2 95/2 185/2 185/2 2 x 150 / 2 x x 185 / 2 x / 4 x B5/19
6 Characteristics - TeSys GS UL, CSA, EC switch-disconnector- For use with CC and J From 30 to 800 A Switch-disconnector-fuse characteristics Type GS1 DDU3 GS1 DU3 GS2 EEU3 GS2 EU3N Environment Conforming to standards Switch-disconnector- UL 489, CSA 22.2 n 5, EC Fuses UL 248 UL 98, UL 248, CSA 22.2 n 4, EC Degree of protection conforming to EC Ambient air temperature around the device Flame resistance conforming to EC With terminal covers P 20 Storage C peration C Body C Fuse cover C 850 Pole characteristics Conventional thermal current (th) A for ambient temperature y C Fuse size CC J CC J Rated insulation voltage (Ui) V Rated impulse withstand voltage (Uimp) kv Rated operational current (e) Cat. AC-23A/B (1) a 0 V A a 500 V A a 690 V A Rated operational power Cat. AC-23A/B (1) a 0 V kw a 500 V kw Prospective short-circuit current withstand Peak value of permissible current (dynamic short-circuit withstand) Conforming to UL 98 / UL 489 Conforming to EC a 690 V kw a 600 V ka a 0 V ka Rated making capacity rms at 0 V Cat. AC-23B A Rated breaking capacity rms at 0 V Cat. AC-23B A Mechanical durability Number of operating cycles Electrical durability Number of operating cycles 1500/ / / /300 Cat. AC/DC-23A/B (1) Cabling Cable (c.s.a. min/max) mm 2 2.5/6 2.5/6 2.5/6 2.5/16 AWG #14/#10 #14/#10 #14/#10 #14/#6 Bars (max width) mm Tightening torque N.m 3 (for wire) 4 (for wire) 5.5 (for wire) 3.5 (for wire) lb-in (1) Category A : frequent operating cycles, category B : infrequent operating cycles. B5/20
7 GS2 GU3N GS2 JU3N GS2 MU3N GS2 QU3N GS2 SU3 GS2 TU3 UL 98, CSA 22.2 n 4, EC UL 248 P J J J J J L / / / / / / /16 4/50 16/150 25/300 2 x 150 #14/#6 #12/#1 #6/300 Kcmil #4/600 Kcmil #2/600 Kcmil (for wire) 4 (for wire) 18 (for lug) 35 (for lug) 35 (for lug) 35 (for lug) B5/21
8 Characteristics - TeSys GS Auxiliary contacts From 32 to 1250 A GS1 AMp11, GS1 AM1 and GS1 AM2 early break and signalling contact characteristics Conventional thermal current (th) for ambient temperature y C A 16 Rated operational current (e) Cat. AC-15 A 127 V: V: 4-0 /415 V: 3-4 V: 2 Cat. DC-13 A 24 V: V: V: V: 0.4 Durability Number of operating cycles Mechanical: Electrical: cat. AC-15: Fuse protection gg A 6 max Cabling mm Faston connectors: 1 x 6.35 or 2 x 2.8 GS1 AN and GS1 ANT signalling contact characteristics Conventional thermal current (th) for ambient temperature y C A 20 Rated operational current (e) Cat. AC-15 A 127 V: V: 10-0/415 V: 8-4 V: 6 Cat. DC-13 A 48 V: V: V: 1 Durability Number of operating cycles Mechanical: Electrical: cat. AC-15: Fuse protection gg A 16 max Cabling Cable (c.s.a. min/max) mm 2 Min: max: 10 GS1 AM110 and GS1 AM101 early break and signalling contact characteristics Conventional thermal current (th) for ambient temperature y C A 10 Rated operational current (e) Cat. AC-15 A 120 V: 6-2 V: 3-0 V: V: 1.5 Cat. DC-13 A 24 V: V: V: V: V: 0.15 Durability Number of operating cycles Mechanical: Electrical: cat. AC-15: Cabling Cable (c.s.a. min/max) mm 2 Min: 1 x max: 2 x 2.5 GSp AF "blown fuse" signalling contact characteristics Conventional thermal current (th) for ambient temperature y C A 16 Rated operational current (e) Cat. AC-15 A 230 V: 4-0 V: 3 Cat. DC-13 A 24 V: V: V: V: 0.4 Durability Number of operating cycles Mechanical: Electrical: cat. AC-15: Cabling mm Faston connectors: 1 x 6.35 B5/22
9 GS1 pp (32 A) Direct front-mounted operator GS1 DD GS1 DDB DF eps ,5 5, , DF eps , , , , ,5 21,5 2xØ5 21, ,5 5,2 2xØ5 External front-mounted operator GS1 DD Door cut-out DF eps min. (1) 35 37,5 15 DF eps DF eps GS1 DDB min. (1) (1) With 1 or 2 auxiliary contacts GS1 AM1pp: 130 mm. (2) With 3 or 4 auxiliary contacts GS1 AM1pp: 155 mm. External right-hand side-mounted operator GS1 DD 37,5 15 Test 65 Test 65 DF eps Door cut-out Door cut-out , Dimensions - TeSys GS EC switch-disconnector- GS1 pp (32 A) From 32 to 1250 A DF eps 36 min. DF eps ,5 70 GS1 DDB Door cut-out DF eps , min. 44 DF eps ,5 70 B5/23
10 Dimensions - TeSys GS EC switch-disconnector- GS1 pp ( A) From 32 to 1250 A GS1 pp (50 0 A) Direct right-hand side-mounted operator GS1 FD (50 A), GD (63 A), JD (100 A), KD, KKD (125 A), LD, LLD (160 A), ND (250 A) and QQD (0 A) DF eps (4) c L K(2) J G1 G Q (5) (1) 70 M H b b1 (3) R1 b2 Ø c1 R 31 P P P1 a1 a c2 GS1 a a1 b b1 b2 c c1 c2 G G1 H J K Ø L M P P1 Q R R1 Ø FD 3P P GD 3P P JD, KD 3P P KKD, 3P LLD 4P LD 3P P ND 3P P QQD 3P P (1) Terminal cover. (2) Mounting on 5 rail only for GS1 FD and GS1 GD (50 and 63 A). (3) Protective screen, lockable in position. (4) 1 or 2 auxiliary contacts GS1 AFpp. (5) 1 or 2 auxiliary contacts GS1 AMp. B5/24
11 EC switch-disconnector- GS2 pp ( A) GS2 pp (32 0 A) External front and right-hand side-mounted operator GS2 DB (32 A), F (50 A), G, GB, JB (63 A), J (100 A), K, KK (125 A), L, LL, LB, LLB (160 A), MMB (200 A), N, NB (250 A), PPB (315 A), QQ and QQB (0 A) DF eps E min. c 31 (1) J G1 a G J1 J2 Q (3) b2 (4) (2) M2 M1 P2 P1 P2 b1 b M H Ø 20 min. 230 max. b2 45 b3 45 c1 P2 P3 GS2 a b b1 b2 b3 c c1 E min.g G1 H J J1 J2 Ø M M1 M2 P P1 P2 P3 Q Ø F, DB 3P (5) (5) P (5) (5) G, GB 3P (6) P (6) J, JB, 3P (6) K 4P (6) KK, 3P (6) LL 4P (6) L, LB, 3P LLB 4P MMB, 3P NB, N 4P PPB, 3P QQB, QQ 4P (1) Terminal cover. (2) Rear access connector plates (option). (3) 1 to 8 auxiliary contacts GS1 AM1pp. (4) 1 or 2 auxiliary contacts GS1 AFpp. (5) 1 auxiliary contact GS1 AM1pp: mm, 2 auxiliary contacts GS1 AM1pp: + 47 mm. (6) 132 mm with 2 auxiliary contacts GS1 AM1pp. P P Ø DF eps Door cut-out For external front-mounted operator 65 Test DF eps For external right-hand side-mounted operator B5/25
12 Dimensions - TeSys GS EC switch-disconnector- GS2 pp ( A) From 32 to 1250 A GS2 pp ( A) Direct front-mounted operator GS2 S, SB (630 A), TB (800 A), V and VB (1250 A) DF eps E min. c 155 Q R G a 34 79,5 11 (1) 235,5 188 b (3) 235, ,5 (2) 7 59 Ø13 P P 9 c1 GS2 a b c c1 E min. G P Q R S, SB, TB 3P P V, VB 3P P (1) Handle GS2 AH104 for GS2S, GS2 SB and GS2 TB. (2) Terminal cover. (3) Rear access connector plates (GS2 V and GS2 VB). DF eps Handle GS2 AH105 for GS2 V and GS2 VB (direct front-mounted operator) DF eps 330 Connector plates for GS2 V and GS2 VB Ø B5/26
13 EC switch-disconnector- GS2 pp ( A) DF eps GS2 pp ( A) External front and right-hand side-mounted operator GS2 S, SB (630 A), TB (800 A), V and VB (1250 A) E min min. 61 b DF eps Handle GS2 AH570 or GS2 AH580 for GS2 V and GS2 VB (external front-mounted operator) GS2 b E min. S, SB, TB 3P P V, VB 3P P Door cut-out For external front-mounted operator For external right-hand side-mounted operator DF eps DF eps B5/27
14 Dimensions - TeSys GS UL, CSA, EC switch-disconnector- GS1 pp and GS2 pp (30 and 60 A) From 30 to 800 A Switch-disconnectors-, 30 and 60 A GS1DU3 (30 A) class CC, GS1DDU3 (30 A) class J DB eps Rating F H J J1 N N1 AA Z 30 / CC / J GS2EEU3 (30 A) class CC DB eps GS2EU3N, GS2GU3N (60 A) class J DB eps DF eps Accessories Handle for 30 and 60 A switch-disconnector- External front handle Door cut-out External side handle Door cut-out DF eps DF eps DF eps 65 Test 70 B5/
15 UL, CSA, EC switch-disconnector- GS2 pp ( A) DB eps Switch-disconnectors, 100 to 0 A GS2JU3N (100 A) class J DB eps GS2MU3N (200 A) class J GS2QU3N (0 A) class CC DB eps DF eps Accessories Handle for 100, 200 and 0 A switch-disconnector- For external front-mounted operator 65 Test For external right-hand side-mounted operator DF eps B5/29
16 Dimensions - TeSys GS UL, CSA, EC switch-disconnector- GS2 pp (600 and 800 A) From 30 to 800 A DB eps Switch-disconnectors, 600 and 800 A GS2SU3 (600 A), GS2TU3 (800 A) class J min Ø Accessories Handle for 600 and 800 A switch-disconnector- For external front-mounted operator 364 For external right-hand side-mounted operator DF eps DF eps B5/30
17 Dimensions, schemes - TeSys GS Auxiliary contacts From 32 to 1250 A Auxiliary contacts GS1 AM111, GS1 AM211 GS1 AM110, GS1 AM101 DF eps DF eps Schemes 3-pole GS 4-pole GS 32 to 1250 A 32 A 50 to 1250 A 2/T1 4/T2 6/T3 2/T1 4/T2 6/T3 8/T3 2/T1 4/T2 6/T3 8/T3 DF eps 1/L1 3/L2 5/L3 DF eps 1/L1 3/L2 5/L3 7/L3 DF eps 1/L1 3/L2 5/L3 7/L3 Auxiliary contacts GS1 AM110 GS1 AM101 GS1 AM111 and GS1 AM1 GS1 AM211 and GS1 AM2 1 N/ 1 N/C 1 C/ 2 C/ DF eps p4 p3 DF eps p2 p1 DF eps DF eps GS1 ANpp GS1 AFp 1 N/C + 1 N/ 2 N/C + 2 N/ 1 C/ 2 C/ DF eps DF eps DF eps DF eps B5/31
18 B5/32
TeSys GS & DF Fuse protection
TeSys GS & DF Fuse protection Simple and effective protection TeSys GS Fuse disconnect switches Total isolation between poles Safe replacement of the fuses (double breaking system) Frontal and right side
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationSIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationCharacteristics TeSys contactors 0 TeSys k contactors and reversing contactors
90 Characteristics TeSys contactors 0 TeSys k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 5424 Product certifications LCp
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More informationSIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
More informationFUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
More informationCylindrical fuse-link
Cylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity Characteristics ody material 00 V AC, 00 V AC, 90 V AC CH 8 - A/00 V CH 0,- A/00 V, 0-3 A/00 V CH
More informationSpecial Purpose Fuses
Special Purpose Fuses Fuses for DC voltage applications www.eti.si ETI Elektroelement d.d. Obrezija 5, SI - 111 Izlake Slovenija Tel. + 38 03 5 57 570 Faks + 38 03 5 7 077 eti@eti.si NH DC 80 V - Telecom
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More informationSIRCO M and MV Universal load break switches from 16 to 160 A
SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV
More informationSIRIUS 3RU2 Thermal Overload Relays
Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
More informationTeSys D, K. Catalogue 2017 'S335' series contactors for electrodomestic applications. schneider-electric.com
TeSys D, K Catalogue 2017 'S335' series contactors for electrodomestic applications schneider-electric.com Presentation TeSys D, TeSys K TeSys D, TeSys K: S335 series Best-in-class contactors for electrodomestic
More informationNon-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
More informationContact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
More informationK50H004UP cam changeover switch - 4-pole A - screw mounting
Characteristics cam changeover switch - 4-pole - 60-50 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationTeSys contactors 5. Characteristics 5. Mini-contactors TeSys LC1 SK and LP1 SK. Environment Rated insulation voltage (Ui) 5/30
Characteristics TeSys contactors Mini-contactors TeSys LC SK and LP SK Environment Rated insulation voltage (Ui) Conforming to 0, VDE 00 gr C,BS, CSA - n, UL 0 V 0 Conforming to standards IEC 0, NF C -0,
More informationProtection Equipment
Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection
More informationK30H001YP cam star-delta switch - 3-pole A - screw mounting
Characteristics cam star-delta switch - 3-pole - 60-32 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationGV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
More informationModular contactors and relays
pages /4 to / pages /8 and /9 pages /10 and /11 pages /12 and /13 Presentation and standards Presentation Designed for use in modular panels and enclosures, these contactors feature : i Easy installation
More informationXCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
More informationProtection Equipment. 5/2 Introduction
Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1
More informationAF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More information25A 25A 32A 40A 40A 63A 63A 80A
ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A
More informationElectronic overload relays EF205 and EF370
Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationLC1F500FD TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 500 A - coil 110 V DC
Product datasheet Characteristics LC1F500FD TeSys F contactor - 3P (3 NO) - AC-3 -
More informationBulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled
More informationCylindrical fuse-link
ylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity haracteristics Body material 00 V A, 500 V A, 90 V A H 8-5 A/00 V H 0,5- A/500 V, 0-3 A/00 V H -5
More informationFUSIBLE DISCONNECT SWITCHES (UL98) GM SERIES
FUSIBLE DISCNECT SWITCHES (UL98) GM SERIES Three-pole disconnect switches with fuse holder (UL98) GMF...030 C12 GMFJ 100 C03 GMFJ 400 C03 GMFJ 800 C03 Add-on blocks GMX10 10 GMX3... GMX8 00 GMX8 01 GMX5...
More informationBulletin 1494V Variable Depth Flange-Mounted Disconnect Switches. Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches
2 Bulletin 1494 NEMA Disconnect Switches Section Overview Bulletin 1494V Variable Depth Flange-Mounted Disconnect Switches Open Type, Fusible 30 600 A Open Type, Non-Fusible 30 600 A Page 2-3 Bulletin
More informationNon-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
More informationSIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationXB5AD33 SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS
Characteristics SELECTOR SWITCH 230VAC 2AMP XB5 +OPTIONS Product availability : Stock - Normally stocked in distribution facility Price* : 68.00 USD Main Range of product Product or component type Device
More informationLC1F330M7 TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 330 A - coil 220 V AC
Product data sheet Characteristics LC1F330M7 TeSys F contactor - 3P (3 NO) - AC-3 -
More informationTechnical data OT16E3 OT160E3 UL & CSA
Technical data OT16E3 OT16E3 UL & CSA UL & CSA Catalog number 3 pole OT16E3 OT25E3 OT32E3 OT45E3 OT63E3 OT3E3 OT6E3 OT1E3 OT16E3 Approvals 1 2 pole N/A N/A N/A N/A N/A N/A N/A N/A UL98 & EC 3 pole UL58
More informationIntroduction. Standard Features. GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Introduction
Introduction Introduction Schneider Electric offers a complete line of products for the manual control and protection of motors. This catalog covers those devices designed to meet IEC standards for protection
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationDCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC
More informationMANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
More informationC -5 to +55 (0.8 to 1.1Uc) Permissible o
T - Line Contactors 3 & 4 Pole Contactors with C operating coils General Characteristics Type Unit TC1-D09 ~ TC1-D95 Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 VDEO 110grC/IEC 60947-4
More informationIndustrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
More informationMS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
More informationLC1F400E7. Main. Product or component type Device short name. Utilisation category. Poles description Pole contact composition
Product datasheet Characteristics LC1F400E7 Complementary [Uimp] rated impulse withstand voltage Overvoltage category [Ith] conventional free air thermal current Main Range Product name Product or component
More informationFUSIBLE DISCONNECT SWITCHES
FUSIBLE DISCONNECT SWITCHES HIGHLIGHTS: Double break contacts per pole up to 400 A Touch safe fuse covers/line shrouding standard Service Entrance Rated Compact Footprints Front operated switches Side
More informationAF09... AF30 3-pole Contactors up to 20 HP / 480 VAC
AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory
More informationAF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationB Mini Contactor V Hz
ABB B7-30-10-80 Mini Contactor 220-240V 40-450Hz General Information Extended Product Type Product ID B7-30-10-80 GJL1311001R8100 EAN 4013614150197 Catalog Description Long Description B7-30-10-80 Mini
More informationAF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More informationFUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
fuser_548_a_1_cat fuser_532_a_1_cat fuser_539_a_1_cat FUSERBLOC from 25 to 32 A FUSERBLOC from 630 to 1250 A FUSERBLOC from 32 to 400 A Function FUSERBLOC are manually operated multipolar fuse combination
More informationMS General Information Extended Product Type: MS
MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual
More informationManual Motor Starters. Meta-MEC
Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters
More information70 RT HP SWITCH DISCONNECTORS IN PLASTIC BOX
70 RT HP SWITCH DISCONNECTORS IN PLASTIC BOX SWITCH DISCONNECTORS IN METAL BOX ATEX SWITCH DISCONNECTORS IN METAL BOX The switch disconnectors in plastic boxes, which are available in control or emergency
More informationSIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC
and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar
More informationTechnical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products
94 D 5384 Technical Brochure Rotary Type nstallation Switches 16...160 A, 500 V Brochure T_M 22 GB 99-08 Low Voltage Products 9809CD03 Rotary Type nstallation Switches 16 A...160 A ew features for installation
More informationUltraSafe US22 Modular fuse-holders
UltraSafe US22 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive UltraSafe range of Mersen fuse-holders. are finger-safe under IEC standards
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
More informationA compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.
PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants
More informationProtection components
Presentation, characteristics Presentation 1 2 3 motor circuit-breakers are 3-pole thermal-magnetic circuit-breakers standards IEC 60947-2 and IEC 60947-4-1. Connection These circuit-breakers are designed
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.
More informationAF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440
More informationOverload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview
SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.
More information125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request
125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for
More informationAF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits
More informationLC1F630F7 TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 630 A - coil 110 V AC
Product datasheet Characteristics LC1F630F7 TeSys F contactor - 3P (3 NO) - AC-3 -
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays are the alternative to the thermal overload relays. An electronic overload relay offers reliable and fast protection
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationContactors. Mini-contactors type LC1-SKGC for use in modular panels. Conforming to standards IEC/EN , IEC/EN , NF C , VDE 0660
Characteristics Environment Rated insulation voltage (Ui) Conforming to IEC/EN 60947-1, V 690 IEC/EN 60947-4-1, VDE 0110 gr C, CSA - n 14, UL 508.1 Conforming to standards IEC/EN 60947-1, IEC/EN 60947-4-1,
More informationLimit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
More informationLimit switches 3. Page 92. Page 92
Presentation, general characteristics b XCKS with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page Environment characteristics Conformity to standards
More informationB115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationSIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function
The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole
More informationK63F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-63 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
More informationK50F003UP cam changeover switch - 3-pole A - screw mounting
Characteristics cam changeover switch - 3-pole - 60-50 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
More informationContactors KNL A 68 KNL6, KNL9, KNL12, KNL16, KNL18, KNL22, KNL30. Dimensional drawing of KNL KNL6, KNL9, KNL12, KNL16, KNL18 KNL22, KNL30
Contactors KNL KNL6, KNL9, KNL12, KNL16, KNL18, KNL22, KNL30 Adaptable to various control requirements with ability of mounting from one to four additional auxiliary contacts. Versatile product capable
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More informationLimit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
More informationAE 9... AE 40 Contactors NE... Contactor Relays
Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal
More information5 - Contactors. Mini-contactors type LC1 SKGC. TeSys LCp F contactors and reversing contactors
Contents 0 - Contactors Selection guides.............................................page /2 b General, selection of contactors....................... pages /16 k contactors and reversing contactors b
More informationSWITCH FUSES 3KL71 from 32A to 800A Description
from 32A to 800A Description SWITCH FUSES 3KL71 3KL71 is a range of load-break switches suitable for making and breaking on load and disconnetting low voltage electrical circuits. They are commonly used
More informationXMLB020A2S13 pressure switch XMLB 20 bar - adjustable scale 2 thresholds - 1 C/O
Characteristics pressure switch XMLB 20 bar - adjustable scale 2 thresholds - 1 C/O Main Range of product Product or component type Pressure sensor type Device short name Pressure sensor size Controlled
More informationApprovals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking
MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationEmergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0
MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationApprovals UL 508; CSA-C22.2 No ; CSA-C22.2 No. 94; IEC/EN ; CE marking
MainswitchSurfacemounting Partno. P1-25/I2/SVB-SW Articleno. 207294 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationThermal overload relay TF65 and TF96
Data sheet Thermal overload relay TF65 and TF96 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against overload and
More informationSIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationSafety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
More informationNSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals
NSL..S 4-pole / 8-pole Contactor Relays - Spring DC Operated Description - 1-stack contactor relays: 4-pole, - 2-stack contactor relays: 8-pole, - Mechanically linked contact elements available, - Low
More informationThermal overload relay TF140DU and TF140DU-V1000
Data sheet Thermal overload relay TF140DU and TF140DU-V1000 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against
More informationDPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
More informationCertifications UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY) CSA Certified (File No. LR1234) CE
Bulletin R Overview Bulletin R Next Generation Global Fused and Non-Fused Disconnects 0 A A Sizes Fused Switch Versions: - BS - DIN - CSA HRCII-C - CSA HRCI-MISC - UL Class J - UL Class CC - NFC Non-Fused
More information