Disconnect Switches Product Guide

Transcription

1 Disconnect Switches Product Guide Rotary Switches Non-fused Fused Enclosed Rotary Operating Mechanisms Accessories

2 December 4 Disconnect Switches 1 Manual Motor Disconnect Switches Contents Description Page Rotary Disconnect Switches C362/C363 Product Description Features, Benefits and Functions Standards and Certifications Options and Accessories Product Selection C362 Non-fused Switches R, W, C, V & S Frames C363 Fusible Switches, C,V, F Frame Switches Handles and Shafts , 6 Accessories Technical Data and Specifications R, W Frame C-Frame V-Frame S-Frame F-Frame Handles Technical Characteristics , 17 Enclosed Rotary Disconnect Switches Product Selection Dimensional Drawings C361/C371 Operating Mechanisms C361 Variable Depth Disconnects C361 Fixed Depth Disconnects C361 Accessories C371 Fixed/Variable Depth Circuit Breakers

3 2 Rotary Disconnect Switches Product Description December 4 Product Description Non-fused R & W frame, A 80A, non-fusible 0V AC, suitable for use in equipment or machinery as a motor disconnect. Manual motor controller suitable for motor disconnect, horsepower and Amp rated, load break rated, meeting requirements of CSA C22.2 No 14 CEC rule 28-2 (3) (b) and UL508 suitable for motor disconnect. 10 kva short circuit rating when used in conjunction with Class fusing. C, V, & S Frame, A - 1A, non-fusible, 0V AC, rated V DC inclusive to 0A. Suitable for use as motor or industrial control panel disconnects, horsepower and Amp rated, load break rated, meeting requirements of CSA C22.2 No 4 and UL98. Fusible A - 800A fusible 0V AC, C, V & F Frame, rated V DC inclusive to A. Suitable for use as motor or industrial control panel disconnect, suitable for use as a service entrance disconnect, horsepower and Amp rated, load break rated, meeting requirements of CSA C22.2 No 4 and UL98. Features, Benefits and Functions Fusible and non-fusible Rotary or toggle operation (non-fused) Motor disconnects available approved to CEC rule 28-2(3)(b) Base mounting or DIN rail mounting Compact design to minimize panel space requirements Pistol type or selector type handles for through-the-door operation. Toggle type handle for internal panel mounting Variable depth complete range of shafts that can be cut for specific enclosure depths Clear ON and OFF indication. Padlockable in the OFF position with up to three padlocks. Interlocked, defeatable handle available. Allows access by authorized personnel in the ON position. ON/OFF/TEST (3 position) handles allow testing of the control circuit auxiliaries without switching the main contacts. Optional N/O, N/C auxiliary contacts available Visible blade indication up to A (non-fused C & V frames) Line side shrouds standard on all ratings for C, S, V & F frames Load side finger shrouds standard on non-fusible -100A C & V frame and -A fusible. Optional shrouds available for higher ratings of V, S & F frame Terminal lugs standard for C & V frame -100A non-fused and -A fusible. Standards and Certifications R- W-Frames UL 508 CSA C22.2 No 14 CEC rule 28-2(3)(b) IEC C-, V-, S-, F-Frames UL 98 CSA C22.2 # 4 IEC CE Options and Accessories Neutral modules. Auxiliary contacts. 4th pole modules. Protective earth modules. C-Frame Non-Fusible C-Frame Fusible V-Frame Fusible V-Frame Non-Fusible R-Frame Non-Fusible W-Frame Non-Fusible S-Frame Non-Fusible F-Frame Fusible NOTE: Photo does not represent proportional sizing between frame types

4 December 4 Rotary Disconnect Switches Product Description 3 Padlocking Handles can be padlocked in the OFF position with up to three padlocks. For safety reasons, the door cannot be opened when the handle is padlocked. 3x 2x 1x 1 maxi. ø 5 16 in / 8 mm 2 Door Interlock in ON Position The handles allow opening of the door in the OFF position only. In the ON position, the door cannot be opened. This interlocking can however be bypassed by authorized personnel (defeater option on handle) for maintenance, testing or commissioning. Figure 1. Padlocking Capability (Type G Pistol Handle is Shown) I-ON OFF Defeater The defeat function allows qualified personnel to bypass the door interlock when the switch is in the ON position by means of a tool. This exclusive design is also available in a 4 and 4X rating. Figure 2. Door Interlocking ON OFF Toggle Option Available for internal panel mounting. Figure 3. Interlocking Defeater Toggle Operated Switch (Shown with Optional Toggle Cover Plate CWP3)

5 4 Rotary Disconnect Switches Product Selection December 4 Product Selection Switches Catalogue Ordering Information When ordering specify: Catalogue number of switch. Catalogue number of operating handle. Pages 5,6. Catalogue number of required shaft. Pages 5,6. Catalogue number of (optional) accessories. Page 7. For dimensional data. Pages 8-. For technical data. Pages 16, 17. Table 1. Non-Fusible Switches Ampere Rating Maximum 3-Phase Horsepower Rating 240V 480V 0V Catalogue DIN Rail / Base Mounted Rotary Switch R-, W-Frame with Brass Collar DIN Rail / Base Mounted Toggle Switch R-, W-Frame DIN Rail / Base Mounted Rotary Switch C-Frame C362NRMD C362NR40MD C362NWMD C362NW80MD C362TRMD C362TR40MD C362TWMD C362TW80MD C362UC Base Mounted Rotary Switch V-Frame Base Mounted Rotary Switch S-Frame C362UV C362UV100 C362UV C362US C362US0 C362US800 C362US1000 C362US1 Note: Suffix MD indicates Manual Motor Controller suitable for Motor Disconnect meeting requirements of CSA C22.2 No.14 CEC rule 28-2(3)(b) and UL508 suitable for motor disconnects. For additional HP ratings refer to pages 16 and 17. Table 2. Fusible Switches Ampere Rating Fuse Type 0V Maximum 3-Phase Horsepower Rating 240V 480V 0V DIN Rail / Base Mounted Fusible Switch C-Frame CC Base Mounted Fusible Switch V-Frame C C Base Mounted Fusible Switch F-Frame L Catalogue C363UCCT (CC) C363UCT () C363UVC C363UV C363UV C363UV100 C363UV C363UV C363UVCT C363UVT C363UVT C363UV100T C363UVT C363UVT C363UF0 C363UF800L Note: T suffix denotes test position is provided. Test handle is required for test function.

6 December 4 Rotary Disconnect Switches Product Selection Handles and Shafts Fusible/Non-Fusible Accessories Product Selection Handles and Shafts Table 5. Handles and Shafts 5 Black Selector Handle Red/ellow Selector Handle Selector Shafts NEMA Rating Defeatable Padlockable Color Operation IEC Type Dimensions Catalogue Inches mm Selector Handle for Type CSSA Shaft and R- and W-Frames or CSCSA Shaft and C-Frames 1 1, 3R, 12 1, 3R, 12 No No No No Black Red/ellow Black ON/OFF IP54 Rotary Switch Selector Shaft 5 x 5 mm (For Selector Handle and R- and W-Frames) Rotary Switch Selector Shaft 5 x 5 mm (For Selector Handle and C-Frames) CSBR5 CSR6 CSBR6 CSSA055 CSSA110 CSSA0 CSSA180 CSSA CSSA0 CSCSA120 CSCSA CSCSA320 CSCSA NEMA Rating Please refer to Page. Defeatable Padlockable Color Operation IEC Type Dimensions Catalogue Inches mm Pistol Handle Type D (For use with CPDSA & CPDCSA Shafts for R- and W-Frames and C-Frame.) 1, 3R, 12 1, 3R, 12 1, 3R, 12 1, 3R, 12 No No Black Red/ellow Black Red/ellow IP54 IP54 IP54 IP54 Type D Shafts 5 x 5 mm (For use with Type D Pistol Handles and R- and W-Frames) Type D Shafts 5 x 5 mm (For use with Type D Pistol Handles and C-Frames) Direct Handle R-, W-Frames (For Direct Mounting No Separate Shaft Required) 1, 3R, 12 1, 3R, 12 1, 3R, 12 Black Pistol Handle (Type D) Red/ellow Pistol Handle (Type D) Type D Pistol Shafts No No No Black Black Black ON/OFF ON/OFF ON/OFF IP54 IP54 IP CPBR5N CPR5N CPBR5D CPR5D CPDSA120 CPDSA CPDSA320 CPDSA CPDCSA120 CPDCSA CPDCSA320 CPDCSA CDRR3 CDRW3 CDRR4

7 6 Rotary Disconnect Switches Product Selection Handles and Shafts December 4 Table 5. Handles and Shafts (Continued) Black Pistol Handle (Type G) Red/ellow Pistol Handle (Type G) Type G Pistol Shafts NEMA Defeatable Padlockable Color Operation IEC Type Dimensions Catalogue Rating Inches mm Pistol Handle Type G (For use with R-, W- and C-Frames with 5 x 5 shaft and V-Frame below 100A with 10 x 10 shaft) 1, 3R, 12 1, 3R, 12 1, 3R, 12, 4, 4X Black Red/ellow Black IP54 IP54 CPBR5 CPR5 CPBW6 1, 3R, 12, 4, 4X 1, 3R, 12, 4, 4X 1, 3R, 12, 4, 4X Red/ellow- Black Red/ellow TEST/ON/OFF TEST/ON/OFF Long Pistol Handle Type GL (For use with V-Frame 100A and above with 10 x 10 shaft) 1, 3R, 12 1, 3R, 12 1, 3R, 12, 4, 4X 1, 3R, 12, 4, 4X 1, 3R, 12 1, 3R, 12 Black Red/ellow Black Red/ellow Black Red/ellow TEST/ON/OFF TEST/ON/OFF Type G Shafts 5 x 5 mm (For use with Type G Pistol Handle and R- and W-Frames) Type G Shafts 5 x 5 mm (For use with Type G Pistol Handle and C-Frames) Type G Shafts 10 x 10 mm (For use with Type G and GL Pistol Handles and V-Frames) IP54 IP CPW6 CPBW6T CPW6T CPBVR5 CPVR5 CPBVW6 CPVW6 CPBVW6T CPVW6T CPGSA120 CPGSA CPGSA320 CPGSA CPGCSA120 CPGCSA CPGCSA320 CPGCSA CPGSB CPGSB320 CPGSB NEMA Defeatable Padlockable Color Operation IEC Type Dimensions Catalogue Rating Inches mm Pistol Handle Type H (For use with S-Frames with x shaft) 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 No No Black Red/ellow Black Red/ellow CPBSW6D CPSW6D CPBSW6N CPSW6N Pistol Handle Type H (For use with F-Frames with x shaft) 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 1, 3R, 4, 4X, 12 No No Black Red/ellow Black Red/ellow Type H Shafts x mm (For use with Type H Pistol Handles and S- and F-Frames) Please refer to Page. Pistol Handle (Type H) CPBFW6D CPFW6D CPBFW6N CPFW6N CPHSC CPHSC

8 December 4 Rotary Disconnect Switches Fusible/Non-Fusible Accessories 7 Product Selection Accessories Table 3. Accessories R, W-Frames Description Catalogue Table 4. Accessories C, S, V, F-Frames Description Catalogue Toggle Cover Plates Auxiliary Contacts Kit (Holder and Contact) Auxiliary Contacts (Additional Contacts) For use with C362TRMD & 40MD For use with C362TWMD & 80MD 1NO for R-Frame ( & 40 Amps) 1NO for W-Frame ( & 80 Amps) 1NO - for R, W-Frame 1NC - for R, W-Frame Extension Support Replacement Brass Collar R and W-Frames Door Mounting Kit R and W-Frames Rotary Switches The mechanism is reversed on these contacts. CRP3 CWP3 CRAC3 CWAC3 CRAB CRAA C362SS1 CRC CTRFC Auxiliary Contact Holders Auxiliary Contacts Load-Side Terminal Shrouds for Non-Fusible V- and S-Frames Load-Side Terminal Shrouds for Fusible V- and F-Frames Shorting Links for 3 Poles Fusible, V- and F-Frames Terminal Lugs for Non-Fusible and Fusible V-, S- and F-Frames, for line or load side C-Frame (for 5-8) V-Frame (for 1-8) S-Frame (for 1-4) 1 NO, Type U aux. contact for C, V, S Frames 1 NC, Type U aux. contact for C, V, S Frames 1 NO/NC, Type S aux. contact, for A-A V-Frames 2 NO/NC, Type S aux. contact, for A-A V-Frames 1 NO/NC, Type ST aux. contact for Fusible, A-A V-Frame w/test 2 NO/NC, Type ST aux. contact for Fusible, A-A V-Frame w/test 1 NO/NC, Type MS aux. contact, for Fusible 0A & 800A F-Frame 2 NO/NC, Type MS aux. contact, for Fusible 0A & 800A F-Frame 3-Pole, V-Frame (A) 3-Pole, for Non-Fusible S-Frame ( - 0A) 3-Pole, for Non-Fusible S-Frame (800-1A) 3-Pole, for Fusible V-Frame (100A) 3-Pole, V-Frame (A) 3-Pole, for Fusible V-Frame (A) 3-Pole, for Fusible F-Frame (0 & 800A) V-Frame (A) V-Frame (100A) V-Frame (A) V-Frame (A) F-Frame (0 & 800A) 1 Wire/lug, Wire Size #12-2/0, for Fusible V-Frame (100A) 1 Wire/lug, Wire Size #6-3/0, for V-Frame (A) 2 Wires/lug, Wire Size #2-0,MCM for V, S- & F-Frames ( & 0A) 3 Wires/lug, Wire Size #2-0, MCM for S-& F-Frames ( A) 2 Wires/lug, Wire Size# 2-0, MCM S-Frame (1A) CUCU CUVU CUSU CUSAA CUSAB CUVAC 0 CUVAD 0 CUVXC 0 CUVXD 0 CUFAC CUFAD CUVT CUS0T CUS1T CUV100T CUVT CUVT CUF800T CUVSL CUV100SL CUVSL CUVSL CUF800SL CUV100LN CUVLN CUS0LN CUS1000LN CUS1LN C-Frames (standard product) hold 1-4 Auxiliary Contacts without additional holder. Line-side terminal shrouds provided as standard on all ratings. Load-side terminal shrouds standard on non-fused C and V-Frames up through 100A. Line-side terminal shrouds provided as standard on all ratings. Load-side terminal shrouds standard on fusible switches up through A. Kit of 3. Terminal lugs provided as standard on Non-Fusible up through 100A and Fusible up through A. Kit of 3. Kit of 6. Aux contacts are Early Break/Late Make. 0 Side mounted aux contact do not have Early Break - they open and close at the same time as the switch.

9 8 Rotary Disconnect Switches Non-fused Technical Data and Specifications M, R, W Frame December 4 Dimensions, Weights and Ratings Dimensions, weights and ratings given in this Product Guide are approximate and should not be used for construction purposes. Drawings containing exact dimensions are available upon request. All listed product specifications and ratings are subject to change without notice. Photographs are representative of production units. Technical Data and Specifications Dimensions in Inches (mm) D 2.17 (55) E A D 2.28 (58) E A 0.34 (8.5) B 1.5 (38) 1.26 (32) L 0.34 (8.5) L B R-Frame W-Frame Figure 4. R- and W-Frames Table 6. R- and W-Frames Dimensions in Inches (mm) Frame Ampere Rating A B D E K L R W (50.8) 2.09 (53.1) 2.75 (69.9) 3.35 (85.1) 2.68 (68.1) 2.88 (73.2) 1.65 (41.9) 1.69 (42.9) 1.89 (48.0) 2.05 (52.1).17 (4.3).17 (4.3) Note: Frame is designated by the sixth character in the switch Catalogue number.

10 December 4 Rotary Disconnect Switches Non-fused Technical Data and Specifications C-Frame 9 Dimensions in Inches (mm) C362UC C A 1 Dual Dimensions Inches (mm) B K K1 X C363UCCT C A 1 K1 X B K H1 C363UCT C A 1 B K K1 X Figure 5. C-Frames Table 7. Dimensions in Inches (mm) Description A B C H H1 H2 H3 1 K K1 3-Pole 3.78 (96.0) 3-Pole 3.78 (96.0) 3-Pole 4.13 (104.9) 4.56 (1.8) 4.56 (1.8) 4.56 (1.8) 2.59 (65.8) 3.28 (83.3) 3.89 (98.8) 1.47 (37.3) 5.19 (131.8) 1.47 (37.3) 1.47 (37.3).59 (.0).59 (.0).59 (.0) 3.13 (79.5) 3.13 (79.5) 3. (83.8) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4)

11 10 Rotary Disconnect Switches Non-fused Technical Data and Specifications V-Frame December 4 Dimensions in Inches (mm) C362UV C362UV100 C.4 (10.2) 1.14 (29.0) 1 Dual Dimensions Inches (mm) K1 5 (127.0) X K B A C362UV C 1.14 (29.0) 1.4 (10.2) M 10 H2 K1 5 (127.0) X 6.53 (165.9) K B H3 H2 A Figure 6. Non-Fusible V-Frames Table 8. Dimensions in Inches (mm) Description A B C H H1 H2 H3 1 K K1 3-Pole 6.69 (169.9) 3-Pole 6.69 (169.9) 3-Pole 9.52 (241.8) 5.87 (149.1) 5.87 (149.1) 8.13 (206.5) 3.89 (98.8) 3.89 (98.8) 3.42 (86.9) 1.50 (38.1) 1.50 (38.1) 6.87 (174.5) 4.39 (111.5) 2.44 (62.0) 2.75 (69.9) 2.75 (69.9) 3.68 (93.5) 5.25 (133.4) 5.25 (133.4) 7.50 (190.5) 2.63 (66.8) 2.63 (66.8) 3.74 (95.0).95 (24.1).95 (24.1).95 (24.1)

12 December 4 Rotary Disconnect Switches Fusible Technical Data and Specifications V-Frame 11 Dimensions in Inches (mm) C363UVCT / C363UVC C363UVT / C363UV C363UVT / C363UV C.4 (10.2) 1.14 (29.0) 1 Dual Dimensions Inches (mm) K1 B 5 (127.0) X K A C363UV100T / C363UV100 C363UVT / C363UV C 1.14 (29.0) 1.4 (10.2) M8 M10 H2 K1 5 (127.0) X K3 K B H3 H H (2.1) A Figure 7. Fusible V-Frames Table 9. Dimensions in Inches (mm) Description A B C H H2 H3 1 K K1 K3 3-Pole 5.63 (143.0) 3-Pole 6.72 (170.7) 3-Pole 6.72 (170.7) 3-Pole 8.26 (209.8) 3-Pole 9.44 (239.8) 5.87 (149.1) 5.87 (149.1) 5.87 (149.1) 7.19 (182.6) 8.13 (206.5) 3.89 (98.8) 5.62 (142.7) 5.62 (142.7) 5.63 (143.0) 6.00 (2.4) 1.14 (29.0) 1.50 (38.1) 1.50 (38.1) 4.06 (103.1) 7.27 (184.7) 5.27 (133.9) 6.87 (174.5) 3.66 (93.0) 4.79 (121.7) 2.05 (52.1) 2.44 (62.0) 2.38 (.5) 2.75 (69.9) 2.75 (69.9) 3.28 (83.3) 3.68 (93.5) 5.31 (134.9) 5.31 (134.9) 5.31 (134.9) 6.61 (167.9) 7.56 (192.0) 2.63 (66.8) 2.63 (66.8) 2.63 (66.8) 3.28 (83.3) 3.75 (95.3) 1.21 (.7).95 (24.1).95 (24.1) 5.55 (141.0) 6.53 (165.9) 1.00 (25.4) 1.03 (26.2)

13 12 Rotary Disconnect Switches Fusible Technical Data and Specifications V-Frame December 4 Dimensions in Inches (mm) C363UVT / C363UV Dual Dimensions Inches (mm) C 1.14 (29.0) 1 M 10.4 (10.2) H2 K1 B 5 (127.0) X K H H3 H (165.9) H1 A Figure 8. Fusible V-Frames (Continued) Table 10. Dimensions in Inches (mm) Description A B C H H1 H2 H3 1 K K1 3-Pole (3.0) (363.5) 5.56 (141.2) 5.28 (134.1) (289.8) 7.04 (178.8) 6.59 (167.4) 2.84 (72.1) 2.04 (51.8) 8.83 (224.3) 4.41 (112.0) 1.06 (26.9)

14 December 4 Rotary Disconnect Switches Non-Fusible Technical Data and Specifications S-Frame 13 Dimensions in Inches (mm) C362US C362US0 C Dual Dimensions Inches (mm) 1 ø.51 ø (13.0) H X K1 K2 K B H2 H C362US800 C362US1000 C362US1 H1 C 2.36 (59.9) 2.36 (59.9) 3.42 (86.9) ø 1.3 ø (33.0) 3. (80.0) 1 A H 8.48 (2.4) 8.85 (224.8) H B X K1 K2 K 8.28 (210.3) H (119.9) A Figure 9. Non-Fusible S-Frames Table 11. Dimensions in Inches (mm) Description A B C H H1 H2 1 K K1 K2 3-Pole (279.9) 3-Pole (371.9) 12. (320.0) (3.2) 5.51 (140.0) 5.51 (140.0) 9.05 (229.9) 9.05 (229.9) 5.43 (137.9) 5.43 (137.9) 8.66 (220.0) C362US1 when used with optional terminal lugs CUS1LN. C362US800 and C362US1000 and when used with optional terminal lugs CUS1000LN (280.4) (347.0) 5.00 (127.0) 6.83 (173.5) 6.88 (174.8) 6.88 (174.8) 2.34 (59.4) 2.34 (59.4) 1.10 (27.9) 1.10 (27.9) 1.85 (47.0) 1.85 (47.0)

15 14 Rotary Disconnect Switches Fusible Technical Data and Specifications F-Frame December 4 Dimensions in Inches (mm) C363UF0 C363UF800L 2.36 (59.9) 3.42 (86.9) ø 1. ø (33.0) Dual Dimensions Inches (mm) 2.36 (59.9) C H (105.9) 5.98 (1.9) 1 H2 K1 K 9.17 (232.9) 9.53 (242.1) H B 9.52 (241.8) X (321.8) H (119.9) A Figure 10. Fusible F-Frames Table 12. Dimensions in Inches (mm) Description A B C H H1 H2 H3 1 K K1 3-Pole (436.4) (362.0) (326.9) 9.74 (247.4) (280.9) C363UF800L when used with optional terminal lugs CUS1000LN. C363UF0 when used with optional terminal lugs CUS0LN (220.0) 7.75 (196.9) (345.0) 1.51 (38.4) 9.84 (.0) 4.92 (125.0) 7.48 (190.0)

16 December 4 Rotary Disconnect Switches Technical Data and Specifications Handles Handles Dimensions in Inches (mm) 2.44 (62) 2.44 (62) 0.69 (17.5) 0.49 (12.4) 1.5 (38) 0.31 (8) 5/8" (16) ø 1/16" (1.6) ø 7/8" (23) 2.58 (65.5) 2.48 (63) 1.83 (46.5) ø 1-1/4" (31) DOOR DRILLING I - ON 2 ø 1/8" (3.2) 90º 0 - OFF 2" (50) Figure 11. Selector Handle Figure 14. Pistol Handle Type D 2.87 (73) 2.78 (70.5) 4.98 (126.5) G GL (70) 4 ø 1/8" (3.2) 2" (50) DOOR DRILLING 2" (50) ø 1-1/4" (31) I - ON Test Position 65º 90º 0 - OFF 3. (80) 7.48 (190) 3.94 (100.0) 2" (50) DOOR DRILLING ø 1/8" (3.2) 2" (50) ø 1-1/4" (31) Figure 12. Pistol Handle Type G and Type GL Figure 13. Mounting Depth H Figure. Pistol Handle Type H Table 13. Mounting Depth Dimensions in Inches (mm) Frame Handle Type R W C (CC or Non-fusible) C (-Class Fuse) V (A CC or Non-Fusible V (A A ) V (A A Non-Fusible) V (100A A ) V (A ) S (A 0A) S (800A 1A) Selector Handle 3.00 (76) 3.27 (83) 3.94 (100) Pistol Handle 3.76 (96) 3.94 (100) 4.13 (105) 5.91 (0) Pistol Handle 3.78 (96) 3.94 (100) 4.13 (105) 5.12 (1) 3.94 (100) 6.10 (5) 4.53 (1) 6.50 (165) 6.89 (175) Pistol Handle 8.35 (212) 8.35 (212) F (0A 800A ) (416)

17 16 Rotary Disconnect Switches Technical Characteristics December 4 Table 14. CSA Technical Characteristics Description R-Frame W-Frame Catalogue Catalogue C362NRMD /C362TRMD C362NR40MD /C362TR40MD C362NWMD /C362TWMD C362NW80MD /C362TW80MD Rating Ampere A 40A A 80A CSA C22.2#14/CEC Rule 28-2/ (3)(b) CSA CSA CSA CSA Short Circuit Rating ka with Fuses Fuse Class Fuse Rating (A) Maximum CSA 120V AC Horsepower 208V AC Ratings (3-Phase) V AC V AC V AC Maximum CSA 120V AC Horsepower 208V AC Ratings (1-Phase) 240V AC V AC V AC Electrical Endurance (Operation Cycles) Mechanical Endurance (Operation Cycles) Terminal Lugs Wire Size #14 #4 #14 #4 #14 #1 #14 #1 Wire Type Cu Cu Cu Cu Weight in Lbs. (kg).44 (.20).44 (.20).66 (.).66 (.) Table. CSA/UL Technical Characteristics C, V, S & F Frame Non-Fused and Fusible Catalogue C Frame V Frame V Frame V Frame V Frame S/V Frame S/F Frame S/F Frame S Frame S Frame C362UC C362UCCT C363UCT C363UVC C363UV C363UVCT C363UVT C362UV C363UV C363UVT 2-pole in series. 3-pole in series. x shaft for non-fusible and 10 x 10 shaft for fusible, A DC rating on non-fusible 0A only, no DC rating for 0A fusible. Values on left = non-fusible. Values on right = fusible. C362UV100 C363UV100 C363UV100T C362UV C363UV C363UVT C362US C363UV C363UVT C362US0 C363UF0 C362US800 C363UF800L C362US1000 C362US1 Rating Ampere CSA C22.2 #4/UL98 CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL CSA/UL Short Circuit Rating ka with Fuses 50 CC / ➄ Fuse Class CC / CC / L L L Fuse Rating (A) Maximum UL 240V AC Horsepower (3-Phase) 480V AC V AC DC 125V ➃ DC V ➃ Electrical Endurance Mechanical Endurance Shaft Size Square Switch Operating Torque Terminal Lugs Wire Size Min- Max (Operation Cycles) (Operation Cycles) Inches (mm) /1000➄ ,000 10,000 10,000 10, / 5000 ➄.2 x.2 (5 x 5).4 x.4 (10 x 10).4 x.4 (10 x 10).4 x.4 (10 x 10).4 x.4 (10 x 10).59 x.59 ( x )/.4 x.4 (10 x 10).59 x.59 ( x ) 3500/ 5000➄.59 x.59 ( x ) x.59 ( x ) lb. in / Non- Fused #14 #10 #14 #10 #10 #3 #10 #3 #6-3/0 (2)#2-(2) 0mcm Fusible #14 #10 #14 #10 #10 #3 #14 2/0 #6-3/0 (2)#2-(2) 0 mcm (2)#2-(2) 0mcm (2)#2-(2) 0mcm (3)#2-(3) 0mcm (3)#2-(3) 0mcm (3)#2-(3) 0 mcm.59 x.59 ( x ) (4)#2-(4) 0mcm Weight in Lbs. (kg) 1.1 (.50) 1.1 (.50) 2.0 (.91) 2.5 (1.1) 4.4 (2.0) 8.8 (4.0) 9.9 (4.5) 22.0 (10.0) 28.6 (13.0).8 (14.0)

18 December 4 Rotary Disconnect Switches Technical Characteristics 17 Table 16. IEC Non-Fusible/Fusible Disconnect Switches from 32 to 1 A Description Catalogue C362UC C362UCCT C363UCT C363UVC C363UV C363UVCT C363UVT Value on left = non-fusible/ value on right = fusible. Cable vs busbar connection on 6A. Busbar vs cable connection on 800A. C362UV C363UV C363UVT C362UV100 C363UV100 C363UV100T C362UV C363UV C363UVT C362US C363UV C363UVT C362US0 C363UF0 C362US800 C363UF800L C362US1000 Rating Ampere /6 ➀ Rated Insulation Voltage Ui (V) Rated Impulse Voltage (Uimp) Operation Current (A) V AC AC 22A AC 23A 690 V AC AC 22A AC 23A Motor Power (kw) 8 kv 8 kv 8 kv 8 kv 8 kv 12 kv / 8 kv ➀ / ➀ 12 kv 12 kv 12 kv 12 kv /6 ➀ /6 ➀ /800 ➀ /6 ➀ C362US1 5 x 5 V AC AC 23A V AC AC 23A V AC AC 23A /220 ➀ 185/0 ➀ /0 ➀ Maxi. peak let through /22 ➀ 32 48/36 ➀ 48/77 ➀ 75/77 ➀ current (ka peak) Connection Minimum Cu x 0 2 x x 240 Cable Section (mm 2) Minimum Cu 2 x x 5 ➁ 2 x 40 x 5 2 x 50 x 2 x Busbar Section (mm 2)

19 18 Rotary Disconnect Switches Enclosed Switches December 4 Enclosed Rotary, 40,, 80 Ampere available. 0V, 3 pole, horsepower rated Type 12/3R, 4X Stainless and 4X Non Metallic Enclosures CSA approved to C22.2 #14 CEC rule 28-2(3) (b) manual motor controller suitable for motor disconnect Accepts auxiliary contacts Capability to signal PLC controller 10 kva short circuit rating when used in conjunction with Class fusing Table 17. Rotary Disconnect Switches - Enclosed Switches Ampere Type 12/3R Enclosure Catalogue Non-Fusible 3 Pole, 0V AC CDRUD CDR40UD CDRUD CDR80UD Type 4X Enc losure Stainless Steel Catalogue CDRUW CDR40UW CDRUW CDR80UW Auxiliary Contacts for Enclosed Rotary Switches CRAC3 ➁ CRAC3 ➁ CWAC3 ➁ CWAC3 ➁ Additional Auxiliary Contacts CRAB ➁ CRAA ➁ Type 4X Enc losure Non Metallic Catalogue CDRUX CDR40UX CDRUX CDR80UX Maximum Horsepower Ratings - Volts AC 1 phase AC Maximum Horsepower Ratings - Volts AC 3 phase AC 120V 280V 240 V 480V 0V 120V 280V V Type 12 enclosure can be field modified to meet type 3R rainproof requirements when a factory provided drain hole is opened. The mechanism is reversed on these contacts Auxiliary contact kit contains holder and 1 NO contact Auxiliary contact kit contains holder and 1 NO contact Auxiliary contact kit contains holder and 1 NO contact Auxiliary contact kit contains holder and 1 NO contact 1 NO contact 1 NC contact V V CDR40UX CDRUD CDRUD CDRUW

20 December 4 Rotary Disconnect Switches Enclosed Switches Variable Depth 19 CDR3UD CDR4UD 5.19 [132 MM] I ON 7.12 [181 MM] 6.86 [174 MM] 0 OFF 1.84 [47 MM].31 [8 MM].312 DIA. [8 MM] 6.04 [3 MM] 7.84 [199 MM] 6.00 [2 MM] 1.84 [47 MM] TPE 12/3R ENCLOSURE. SCREW TO BE REMOVED WHEN USED AS TPE 3R DEVICE 4.66 [118 MM] 6.10 [5 MM] NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #4-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM. CDR3

21 20 Rotary Disconnect Switches Enclosed Switches December 4 CDR6UD CDR380UD 7.69 [195 MM] 5.00 [127 MM] 4.99 [127 MM].09 [383 MM] [336 MM] [365 MM] [358 MM] 4.99 [127 MM] 4.82 [122 MM] 6.26 [9 MM] 8.54 [217 MM].312 DIA. [8 MM] TPE 12/3R ENCLOSURE. SCREW TO BE REMOVED WHEN USED AS A TPE 3R DEVICE. NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #4-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM.

22 December 4 Rotary Disconnect Switches Enclosed Switches 21 CDRUW CDR40UW Type 4X Stainless Enclosure 5.19 [132 MM] 7.84 [199 MM] 6.00 [2 MM] 7.12 [181 MM] 6.86 [174 MM] 1.84 [47 MM] 1.84 [47 MM].312 DIA. [8 MM] 6.04 [3 MM] 4.54 [1 MM] 7.26 [184 MM] NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #4-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM.

23 22 Rotary Disconnect Switches Enclosed Switches Flange Mounted Fixed Depth December 4 CDR80UW CDRUW Type 4X Stainless Enclosure 7.69 [195 MM] 5.00 [127 MM].09 [383 MM] [336 MM] [365 MM] [358 MM] OFF [127 MM] ON 4.99 [127 MM] 4.70 [119 MM] 7.42 [188 MM].31 [8 MM] 8.54 [217 MM].312 DIA. [8 MM] NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #1-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM.

24 December 4 Rotary Disconnect Switches Enclosed Switches 23 CDR40UX CDRUX Type 4X Non-Metallic Enclosure.312 [8 MM] DIA. 4 MOUNTING HOLES 7.38 [187 MM] 6.75 [171 MM] OFF ON 1.87 [47 MM] 1.87 [47 MM] 7.47 [190 MM] 2.00 [51 MM] 3.00 [76 MM] 5.44 [138 MM] 4.72 [120 MM] 7.43 [189 MM] 5.50 [140 MM] NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #4-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM. CDRUX CDR80UX Type 4X Non-Metallic Enclosure.312 [8 MM] DIA. 4 MOUNTING HOLES 5.58 [142 MM].75 [ MM].00 [381 MM].88 [403 MM] 5.58 [142 MM] 5.00 [127 MM] 6.00 [2 MM] 6.88 [175 MM] 9.62 [244 MM] 8.75 [222 MM] NOTE: 1. WIRE RANGE OF SWITCH LUGS IS #1-#14 COPPER. WIRE RANGE OF GROUND LUGS IS #2-#14 COPPER OR ALUMINUM.

25 24 Operating Mechanisms with Disconnect Switches Variable Depth December 4 Complete Operating Handle Only Mechanism C361NE1 C361H1 Product Description Type C361 Disconnect Switches are suitable for installation in control enclosures having a right-hand flange. Fusible disconnect switches will accept R fuses as standard. Field installable rejection kits are supplied as standard on 100A and A clips. For A and A rejection clips, see footnote. The switch is CSA/UL component recognized for use on systems with up to,000 rms symmetrical amperes available fault current when Class R clips are supplied. A standard connecting rod is supplied with switch. Options and Accessories Table 1. Electrical Interlocks Circuit 1NO-1NC 2NO-2NC Table 2. Connecting Rods Increase Maximum Allowable Depth by 5 Inches Application Disconnect Switches,, 100 and A Circuit Breakers 0, and A Circuit Breakers 0, 800 and 1A Catalogue DSEK1 DSEK2 Catalogue C371CS1 C371CS2 Table 3. Operating Mechanism Variable Depth with Disconnect Switch Right-Hand Mounting Disconnect Maximum Horsepower Ratings Switch Size (Amperes) Variable Depth Mounting Range Minimum/ Maximum (Inches) AC System Volts (Motor Volts) 208 () 240 (2) 480 (4) 0 (575) DC Using 2 Poles V Maximum Fuse Clip Rating (Amperes) Noninterchangeable Type for Class H,, K or R Type Fuses Only Switch and Operating Mechanism Only DOES NOT Include Handle V 0V Catalogue Switch and Operating Mechanism with 4-Inch Handle For NEMA 1 or 12 Enclosure Catalogue For NEMA 4 Enclosure Catalogue 7 to /2 7-1/ Non-fusible C361NC C361NC1 C361NC2 Dimension shown is from panel to flange surface. Refers to rating of switch only. Components individually boxed and shipped in overpack carton. For rejection clips, add Suffix Letter R to listed Catalogue, and add $9. to price. Example: C361SC121R. Table 4. Handle Only C361SC21 C361SC61 C361SC121 C361SC161 C361SC221 C361SC261 7 to Non-fusible C361ND C361ND1 C361ND2 C361SD22 C361SD62 C361SD122 C361SD162 C361SD222 C361SD to Non-fusible C361NE C361NE1 C361NE C361SE263 C361SE1263 C361SE to Non-fusible C361NF C361NF1 C361NF2 C361SF264 C361SF1264 C361SF2264 Application Operating Handle Length in Inches (mm) NEMA Type Enclosure Catalogue For use with,, 100 and Ampere Disconnect Switches 4.00 (101.6) 4.00 (101.6) 6.00 (2.4) 6.00 (2.4) C361H1 C361H2 C361H3 C361H4

26 December 4 Operating Mechanisms with Disconnect Switches Variable Depth 25 Technical Data and Specifications Datum A D E F C Datum G.62 (.7) 1.62 (41.1) Min. B Figure. Mounting Dimension Requirements Table 18. Mounting Dimension Requirements in Inches (mm) Disconnect Switch Type A B C D E F G A and A Non-fusible A and A Fusible 100A Non-fusible 100A Fusible A Non-fusible and Fusible See Dimensions Below See Dimensions Below 1.56 (39.6) 1.56 (39.6) 1.75 (44.5) 1.75 (44.5) 3.34 (84.8).96 (24.4).96 (24.4) 1.10 (27.9) 1.10 (27.9) 0.63 (16.0) 4.00 (101.6) 4.00 (101.6) 5.50 (139.7) 5.50 (139.7) 8.50 (2.9) 3.50 (88.9) 3.50 (88.9) 3.38 (85.9) 3.38 (85.9) 1.84 (46.7) 7.12 (180.8) 9.75 (247.7) 7.12 (180.8) (1.8).50 (393.7) Table 19. Line Lug Data Disconnect Switch Size Ampere Ampere 100 Ampere Ampere Wire Size #2 14 Cu/Al #2 14 Cu/Al 1/0 14 Cu/Al kcmil #6 Cu/Al Dimension A = The required wire bending spacing selected from Article 4-10 of the National Electrical Code. Dimension B = Minimum or maximum depth from inside of flange holding operating handle to panel where Disconnect Switch is mounted. (Variable 7 to 16 inches.)

27 26 Operating Mechanisms with Disconnect Switches Flange Mounted Fixed Depth December 4 Product Description Type C361 Disconnect Switches are suitable for installation in control enclosures having a right-hand flange. Fusible disconnect switches will accept R fuses as standard. Field installable rejection kits are supplied as standard on 100A and A clips. For A and A rejection clips, see footnote The switch is CSA/UL component recognized for use on systems with up to,000 rms symmetrical amperes available fault current when Class R clips are supplied. Fixed Depth Flange to Panel -A 61/2 inches 100A 7 inches Table 23. Electrical Interlocks Circuit 1NO-1NC 2NO-2NC Table 24. Line Lug Data Disconnect Switch Size Disconnect Switches Ampere Ampere 100 Ampere Ampere Catalogue DSEK1 DSEK2 Wire Size #2 14 AL-CU #2 14 AL-CU #0 14 AL-CU MCM #6 AL-CU Table 25. Operating Mechanism Fixed Depth with Disconnect Switch Right-Hand Mounting Disconnect Switch Size (Amperes) AC System Volts (Motor Volts) Maximum Horsepower Ratings 208 () 240 (2) 480 (4) 0 (575) DC Using 2 Poles V Maximum Fuse Clip Rating (Amperes) Noninterchangeable Type for Class H,, K or R Type Fuses Only Switch and Operating Mechanism with 4-Inch Handle For NEMA 1 or 12 Enclosure V 0V Catalogue 7-1/2 7-1/ Non-fusible C361FNC1 Refers to rating of switch only. For rejection clips, add Suffix Letter R to listed Catalogue. Example: C361FSC121R. C361FSC121 C361FSC Non-fusible C361FND1 C361FSD122 C361FSD Non-fusible C361FNE C361FSE1263 Table 26. Approximate Dimensions Frame Size - Amp. Disc. Switch 0 Amp. Circ. Breaker 100 Amp. Disc. Switch Amp. Circuit Breaker Amp. Circuit Breaker Dimensions in Inches A B C D E 8-5/8 11-3/8 6-1/2 1-1/2 9-1/2 9-7/8 13-3/ /4 11-3/4 D E 3/8 3-3/16 5/16 B 5-13/16 1-3/16 A 3/8" DIA. HOLES FOR PANEL SUPPORT IF NECESSAR DISCONNECT OR CIRCUIT BREAKER C

28 December 4 Operating Mechanisms with Disconnect Switches Accessories 27 Fuse Clips for Variable or Flange Mount Operating Mechanisms C351 Fuse Clip Kit Table 27. C351 Fuse Clip Selection 3 Poles Starter Size Motor Voltage Maximum Horsepower (3-Phase) Dual Element Fuses Fuse Clip Rating Fuse Clip Kit for Field Installation with Non-fusible Starter Amperes Volts Catalogue Catalogue Catalogue Catalogue For Non-rejection Type Fuses For use w/ R Rejection Type Fuses For Form I Type Fuses For Form II Type C Fuses 0 /2 4/575 1 /2 4/ / / / / / Fuse clip R rejection members for use with Class R fuses are supplied loose in the Fuse Clip Kits. Note: Kits do not include fuses C351KC21 C351KD22-61 C351KC21 C351KD22-61 C351KD22-61 C351KD22-61 C351KD62 C351KE23-63 C351KE23-63 C351KE23-63 C351KF24-64 C351KF24-64 C351KF24-64 Not Available in Kit Form C351KC21R C351KD22-61R C351KC21R C351KD22-61R C351KD22-61R C351KD22-61R C351KD62R C351KE23-63 C351KE23-63 C351KE23-63 C351KF24-64 C351KF24-64 C351KF24-64 Not Available in Kit Form C351KD71 C351KD71 C351KD72 C351KE73 C351KF74 Not Available in Kit Form C351KD81 C351KD81 C351KD82 C351KE83 C351KF84 Not Available in Kit Form NEMA 12 Safety Door Hardware Product Selection Type C361 NEMA 12 Safety Door Hardware Type C361 Door Hardware Kits are designed to function with all C361 and C371 disconnect switches and circuit breaker operating mechanisms. These kits are designed for use with small enclosures up to 40 inches (1016 mm), intermediate 40 inches ( mm) or larger floor cases over inches (24 mm) to provide enclosure sealing and protection against unauthorized entry. These kits can be used on enclosure flanges with material thickness ranging from 16 gauge through 3/16 inches with flanges on the right side only. Door hardware kits are to be installed in a commercially available enclosure. Consult the enclosure manufacturer application data for proper kit selection. Table 28. Type C361 NEMA 12 Safety Door Hardware Handle Length (Inches) 4 6 Roller Latch C361KR The 1/4-inch x 1/2-inch standard mill rectangular locking bar is not supplied with these kits. Third roller latch for use with 4 or 6-inch handle when 3 point latching is required. Catalogue C361K4 C361K6

29 28 Circuit Breaker Operating Mechanisms Flange Mounted Fixed Depth December 4 Complete Circuit Breaker Operating Mechanism with Operating Handle C371E1 Handle Only C371H1 Product Description Type C371 Circuit Breaker Operating Mechanisms are designed for installation in control enclosures where main or branch circuit protective devices are required. All circuit breaker mechanisms are suitable for right hand mounting. Auxiliary contacts are not available for mounting on operating mechanism. Where required, have them installed in circuit breaker. Table 29. Operating Mechanisms for Circuit Breakers Flange Mounted Variable Depth Circuit Breaker or Motor Circuit Protector Frame Size Variable Depth Mounting Range Min./Max. (Inches) For increased maximum allowable depth, see Connecting Rods below. Dimensions shown are from panel flange surface. Operating Mechanism Only Does Not Include Handle Catalogue Operating Mechanism With 4 Inch Handle & Rod For NEMA 1-12 Enclosure For NEMA 4 Enclosure Catalogue HMCP, EHD, FDB, FD, FDC, HFD 0 6-1/2 to 16 C371E C371E1 C371E2 HMCP, HD, D, DB, DC HMCP, DK, HKD, KD, KDB 6-1/2 to 16-5/8 C371F C371F5 C371F6 HLD, LD, LDC 0 8-1/2 to 22 C371G C371G5 C371G6 MD, MDS HND, ND, NDC /4 to /4 to 22 C371K C371K5 C371K6 Catalogue Table. Handle Only Circuit Breaker Frame Size (Amperes) NEMA Enclosure Type 0 1-3R R thru 1 1-3R R Operating Handle Length 4 Inches 4 Inches 6 Inches 6 Inches 4 Inches 4 Inches 6 Inches 6 Inches Catalogue C371H1 C371H2 C371H3 C371H4 C371H5 C371H6 C371H7 C371H8 Motor Circuit Protectors Circuit Breakers + + Listed Above Operating Mechanisms Listed Above Operating Handle Channel Support Kit Rod not supplied in Kit For use to prevent bending of the operating handle mounting surface. This is especially useful when the operating handle is mounted on a channel in a multi-door enclosure. Kit included in 0 through 1 ampere mechanisms. Catalogue C371CS6 Table 31. Connecting Rods Increase Maximum Allowable Depth by 5 Inches Application Catalogue Disconnect Switches,, 100, Ampere Circuit Breakers 0,, Ampere Circuit Breakers 0, 800, 1 Ampere C371CS1 C371CS2 For Safety Door Hardware see Page 27

30 December 4 Circuit Breaker Operating Mechanisms Flange Variable Depth, Flange Mounted Fixed Depth 29 Mounting Dimension Requirements Dimension A = 0.75 in. plus the required wire bending spacing selected from Article 4-10 of the National Electrical Code. Dimension B = Minimum or maximum depth from inside of flange holding operating handle to panel where Circuit Breaker is mounted. (variable depth, see page 22) Dimension C = 0 Ampere Size 0.67 in. Ampere Size in. Ampere Size in. 0 Ampere Size 1.71 in Ampere Size 5.17 in.8 Technical Data and Specifications Product Description Type C371 Circuit Breaker Operating Mechanisms are designed for installation in control enclosures with a right hand flange and where main or branch circuit protective devices are required. Auxiliary contacts are not available for mounting on operating mechanism. Where required, have them installed in circuit breaker. Table 32. Flange Mounted Fixed Depth Operating Mechanisms for Circuit Breaker Circuit or Motor Circuit Protector Frame Size Variable Depth Mounting Range Min./Max. (Inches) HMCP, EHD, FDB, FD, FDC, HFD 0 6-1/2 C371FE1 HMCP, HD, D, DB, DC HMCP, DK, HKD, KD, KDB 7 C371FF1 Operating Mechanism With 4 Inch Handle For NEMA 1 or 12 Enclosure Catalogue

31 Notes NOTES December 4

32 December 4 Notes 31

33 32 Notes December 4

34 Eaton Corporation is a diversified industrial manufacturer with 3 sales of $8.1 billion. Eaton is a global leader in fluid power systems and services for industrial, mobile and aircraft equipment; electrical systems and components for power quality,distribution and control; automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety; and intelligent truck drivetrain syst for safety and fuel economy. Eaton has 55,000 employees and sells produc to customers in more than 100 countries. For more information, visit Eaton Corporation 3228 South Service Road Burlington, ON L7N 3H8 Canada Eaton Corporation All Rights Reserved Pub. No.PG.35G.02.T.K December 4 Printed in Canada