1.1. Switching Devices

Transcription

1 . Switching Devices Six-Pole Motor Circuit Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches Product Selection V2-T-43 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Six-Pole Switches Product Description 600 Vac, 250 Vdc maximum A Fusible or non-fusible Application Description A compact safety switch that s ideal for use in heavy industry...when an in sight disconnecting means is required for two-speed motors that are remote from their motor control devices. Features, Benefits and Functions Trunk-type latches keep the cover tightly closed and a neoprene gasket seals out moisture and dust from the switch assembly Visible double-break quickmake, quick-break rotary blade mechanism. Two points of contact provide a positive open and close, easier operation, and also help prevent contact burning for longer contact life Clear line shield protection Built-in fuse pullers Clearly visible handle Triple padlocking capability; cabinet door can be further padlocked at the top and bottom Deionizing arc chutes; arc chutes confine and suppress the arcs produced by opening contacts under load For factory modifications, refer to Pages V2-T-7 through V2-T-20 Standards and Certifications UL listed File No. E5239 V2-T-42 Volume 2 Commercial Distribution CA E February 203

2 Switching Devices. Product Selection DH66UDK 600 Vac Heavy-Duty, Fusible, Six-Pole, Single-Throw System Ampere Rating 600 Vac with Fuse Clips 250 Vdc Maximum Horsepower Ratings, Three-Phase AC (Higher Rating with Time Delay Fuses) 240V 480V 600V NEMA 2 Enclosure Industrial, Dust-Tight / /2 20 DH66FDK / DH662FDK DH663FDK DH664FDK Vac Heavy-Duty, Non-Fusible, Six-Pole, Single-Throw Maximum Horsepower Ratings NEMA 4X Enclosure Three-Phase AC Three-Phase DC NEMA 2 Enclosure Corrosion-Resistant, Ampere Industrial, Dust-Tight Stainless Steel System Rating 240V 480V 600V 250V 600V Vac 250 Vdc DH66UDK DH66UWK DH662UDK DH662UWK DH663UDK DH663UWK DH664UDK DH664UWK Notes NEMA 2 enclosures (30 800A) can be field modified to meet NEMA 3R rainproof requirements when a factory provided drain hole is opened. 2 Contact the Safety Switch Flex Center ( ) for availability of this product Vdc rating requires that the switch be wired per the wiring diagram on the device publication. 30A heavy-duty switches with Type J fuse provisions are available from the factory only. See table on Page V2-T-9 for catalog numbers. NEMA 4X Enclosure Corrosion-Resistant, Stainless Steel Volume 2 Commercial Distribution CA E February V2-T-43

3 . Switching Devices Heavy-Duty Double-Throw Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches Features, Benefits and Functions V2-T-45 Standards and Certifications V2-T-45 Product Selection V2-T-46 Technical Data and Specifications V2-T-50 Dimensions V2-T-50 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches... V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch. V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Double-Throw Switches Product Description Used to transfer service from a normal power source to an alternate source...or to switch from one load circuit to another A Horsepower rated 600 Vac, 250 Vdc maximum A fusible utilize common set of fuses; two Source load applications Fusible or non-fusible Fusible and non-fusible switches are 00% load break and 00% load make rated Suitable for service entrance applications unless otherwise noted The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits. Non-fusible switches are 00% fully rated Approved for service entrance with neutral or ground lug kit installed Wiring configuration from factory allows a single load to be supplied by a normal or alternate source. Can be field modified to allow two loads to be alternately supplied by a single power source 40 Vac General-Duty, Non- Fusible, Compact Design, Double-Throw 30 00A Suitable for service entrance use with neutral kit installed Non-fusible 240 Vac General-Duty, Non- Fusible, Double-Throw A Horsepower rated Suitable for service entrance use with neutral kit installed Non-fusible Quick-make, quick-break operating mechanism 240 Vac Heavy-Duty, Fusible, Non-Fusible, Double-Throw A Horsepower rated Suitable for service entrance use with neutral kit installed Fusible and non-fusible For factory modifications, refer to Pages V2-T-7 through V2-T-20 V2-T-44 Volume 2 Commercial Distribution CA E February 203

4 Switching Devices. Features, Benefits and Functions Ample wire bending space provides for easier installation Visible double-break quickmake, quick-break rotary blade mechanism. Two points of contact provide a positive open and close, easier operation, and also help prevent contact burning for longer contact life Triple padlocking capability. Personnel safety feature since the large hasp can accommodate up to three 3/8-inch (9.5 mm) shank locks. Clearly visible handle. The position (ON or OFF) can be clearly seen from a distance Deionizing arc chutes; arc chutes confine and suppress the arcs produced by opening contacts under load Additional locking capability; cabinet door can be further padlocked at the top and bottom Clear line shield (provided on fusible double-throw) protects against accidental contact with energized parts. Probe holes enable the user to test if the line side is energized without removing the shield Tangential knockouts on sides, top and bottom. Enables any size of conduit to be mounted close to the wall, providing for cable installation closer to the wall and a neat appearance Standards and Certifications UL listed switching neutral capability is available on three-pole and four-pole non-fusible double-throw switches with the installation of the proper bonding kit shown on Page V2-T-5 Suitable for use as a manually operated switch per 2005 NEC Article 702 UL listed File No. E5239 Volume 2 Commercial Distribution CA E February V2-T-45

5 . Switching Devices Product Selection DT223URH-N Compact Design DT224URK-NPS 240 Vac General-Duty, Non-Fusible, Compact Design, Double-Throw Ampere Rating Main and Standby NEMA 3R Enclosure Rainproof Two-Pole 240 Vac 30 DT22URH 60 DT222URH 00 DT223URH Two-Pole, Three-Wire 240 Vac Solid Neutral 30 DT22URH-N 60 DT222URH-N 00 DT223URH-N 240 Vac General-Duty, Non-Fusible, Compact Design, Double-Throw Maximum Horsepower Ratings Ampere Rating Single-Phase AC Three-Phase AC DC Main and Standby 240V 480V 600V 240V 480V 600V 250V NEMA 3R Enclosure Rainproof Two-Pole 240 Vac 250 Vdc DT22URKPS 60 0 DT222URKPS DT223URKPS DT224URKPS DT225URKPS Two-Pole, Three-Wire 240 Vac 250 Vdc, Solid Neutral DT22URK-NPS DT222URK-NPS DT223URK-NPS DT224URK-NPS DT225URK-NPS V2-T-46 Volume 2 Commercial Distribution CA E February 203

6 Switching Devices. 240 Vac Heavy-Duty, Fusible, Double-Throw Maximum Horsepower Ratings with Time Delay Fuses NEMA NEMA 3R Single-Phase AC Three-Phase AC DC Enclosure Enclosure Ampere Rating Fuse Class Indoor Rainproof Main and Standby Provision 240V 480V 600V 240V 480V 600V 250V Two-Pole 240 Vac 250 Vdc 200 H 5 40 DT224FGK DT224FRK Three-Pole 240 Vac 250 Vdc 30 H 3 7-/2 5 DT32FGK DT32FRK 60 H DT322FGK DT322FRK 00 H DT323FGK DT323FRK 200 H DT324FGK DT324FRK 400 H DT325FGK DT325FRK 600 T DT326FGK DT326FRK 800 L DT327FGK DT327FRK 200 L DT328FGK DT328FRK 240 Vac Heavy-Duty, Non-Fusible, Double-Throw Maximum Horsepower Ratings NEMA Single-Phase AC Three-Phase AC DC Enclosure Ampere Rating Indoor Main and Standby 240V 480V 600V 240V 480V 600V 250V NEMA 3R Enclosure Rainproof Two-Pole 240 Vac 250 Vdc DT22UGK DT222UGK DT223UGK DT224UGK DT224URK DT225UGK DT225URK 600 DT226UGK DT227UGK DT227URK 200 DT228UGK DT228URK Three-Pole 240 Vac 250 Vdc DT32UGK DT322UGK DT323UGK DT323URK DT324UGK DT324URK DT325UGK DT325URK DT326UGK DT327UGK 2 DT327URK DT327UGK-N DT328URK DT328UGK Notes Only available for use with fast-acting fuses. Standard hp rating is shown. 2 Field-installable neutral kit is not available. If a neutral is required, order the catalog number shown in the table with N suffix. 3 Contact the Safety Switch Flex Center ( ) for availability of this product. UL listed switching neutral capability is available on three-pole and four-pole non-fusible double-throw switches with the installation of the proper bonding kit shown on Page V2-T-5. See Page V2-T-9 for factory installation from the Flex Center. Volume 2 Commercial Distribution CA E February V2-T-47

7 . Switching Devices EnviroLine/Receptacle Switch EnviroLine Receptacle Switches Product Description These heavy-duty switches are pre-wired and interlocked to polarized receptacles for three-phase, three-wire, grounded type power plugs. Receptacles are interlocked to handle mechanisms so that power plugs may not be inserted or removed when the switch is in the ON position unless noted otherwise. Ratings are 30 00A, 600 Vac, NEMA 2/3R, 4X stainless steel enclosures A Power plugs not supplied with the receptacle Application Description These are used for portable power applications such as welders, infrared ovens, batch feeders, conveyors, truck and marine docks. Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches Product Selection V2-T-59 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Standards and Certifications Upper and lower window UL listed and NEMA approved UL 98 UL listed under Section 508 UL listed File No. E6550 and E5239 V2-T-58 Volume 2 Commercial Distribution CA E February 203

8 Switching Devices. Product Selection 600 Vac Heavy-Duty, Single-Throw with Receptacle, Fusible, Non-Fusible DH362FDK2WR Safety Switch with Receptacle K-Series, Three-Pole, 600 Volt Fuse Clips Fusible Ampere Rating NEMA 2/3R Enclosure NEMA 4X Enclosure Switch Receptacle Power Plug Crouse-Hinds ARKTITET Receptacle Accepts Crouse-Hinds APJ3485 DH36FDK2WR DH36FWK2WR APJ6485 DH362FDK2WR DH362FWK2WR APJ0487 DH363FDK2WR DH363FWK2WR M-R-S (Russellstoll) MAX-GARD Receptacle Accepts Russellstoll DS3404MP DH36FD3WRK DH36FW3WRK DS6404MP DH362FD3WRK DH362FW3WRK DS404MP DH363FD3WRK DH363FW3WRK Appleton POWERTITE Receptacle Accepts Appleton ACP3034BC DH36FD5WRK DH36FW5WRK ACP6034BC DH362FD5WRK DH362FW5WRK ACP034CD DH363FD5WRK DH363FW5WRK Safety Switch with Receptacle K-Series, Three-Pole, 600 Volt Fuse Clips Non-Fusible Ampere Rating NEMA 2/3R Enclosure NEMA 4X Enclosure Switch Receptacle Power Plug Crouse-Hinds ARKTITE Receptacle Accepts Crouse-Hinds APJ6485 DH362UDK2WR DH362UWK2WR Appleton POWERTITE Receptacle Accepts Appleton ACP3034BC DH36UD5WRK ACP6034BC DH362UD5WRK DH362UW5WRK Notes Contact the Safety Switch Flex Center ( ) for additional options including viewing windows and other receptacle manufacturers. Power plugs are not available through Eaton. Volume 2 Commercial Distribution CA E February V2-T-59

9 . Switching Devices EnviroLine/Non-Metallic/Halyester EnviroLine Non-Metallic Halyester Switch Product Description Features This switch has a Halyester A enclosure. These are Halyester high-impact compression molded strength fiberglass fiberglass reinforced reinforced polyester polyester enclosure, which material is capable of withstanding Horsepower rated almost any corrosive environment. Ratings are Suitable for service A, Vac, fusible entrance use and non-fusible. Enclosure is Fusible and non-fusible NEMA 4X rated. Opaque or transparent door Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch Product Selection V2-T-6 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Standards and Certifications Upper and lower window UL listed and NEMA approved UL 98 UL listed under Section 508 UL listed File No. E6550 and E5239 V2-T-60 Volume 2 Commercial Distribution CA E February 203

10 Switching Devices. Product Selection DH36FTK 240 Vac Heavy-Duty Non-Metallic Fusible 250 Volt Maximum Maximum Horsepower Ratings NEMA 4X Enclosure Corrosion- AC Resistant, Non-Metallic Fuse Ampere Class Standard Fuse Time Delay DC Opaque Cover Transparent Cover System Rating Provision Single-Phase Three-Phase Single-Phase Three-Phase 250V Three-Pole, 240 Vac 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H -/ /2 5 DH32FHK DH32FTK 60 H 3 7-/ DH322FHK DH322FTK 00 H 7-/ DH323FHK DH323FTK 200 H DH324FHK DH324FTK Four-Wire (Three Blades, Three Fuses, S/N), 240 Vac 250 Vdc 30 H -/ /2 5 DH32NHK DH32NTK 60 H 3 7-/ DH322NHK DH322NTK 00 H 7-/ DH323NHK DH323NTK 200 H DH324NHK DH324NTK S/N 600 Vac Heavy-Duty Non-Metallic Fusible 600 Volt Maximum NEMA 4X Enclosure Corrosion-Resistant, Maximum Horsepower Ratings Non-Metallic Fuse Ampere Class Single-Phase AC Three-Phase AC DC Opaque Cover Transparent Cover System Rating Provision 480V 600V 480V 600V 250V Three-Pole, 240 Vac 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H 7-/ DH36FHK DH36FTK 60 H DH362FHK DH362FTK 00 H DH363FHK DH363FTK 200 H DH364FHK DH364FTK Four-Wire (Three Blades, Three Fuses, S/N), 240 Vac 250 Vdc 30 H 7-/ DH36NHK DH36NTK 60 H DH362NHK DH362NTK 00 H DH363NHK DH363NTK 200 H DH364NHK DH364NTK S/N 600 Vac Heavy-Duty Non-Metallic Non-Fusible 600V Maximum Horsepower Ratings NEMA 4X Enclosure Corrosion-Resistant, Non-Metallic Ampere Single-Phase AC Three-Phase AC DC Opaque Cover Transparent Cover System Rating 240V 480V 600V 240V 480V 600V 250V Three-Pole, 480 Vac 600 Vac, 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) / DH36UHK DH36UTK DH362UHK DH362UTK DH363UHK DH363UTK DH364UHK DH364UTK Volume 2 Commercial Distribution CA E February V2-T-6

11 . Switching Devices EnviroLine/Non-Metallic KRYDON Switch EnviroLine Non-Metallic KRYDON Switch Product Description Features This switch has a KRYDON A enclosure. These are KRYDON high-impact compression molded strength fiberglass fiberglass reinforced reinforced polyester polyester enclosure, which material is capable of withstanding Horsepower rated almost any corrosive environment. Ratings are Suitable for service A, Vac, fusible entrance use and non-fusible. Enclosure is Fusible and non-fusible NEMA 4X rated. Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch Product Selection V2-T-63 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Standards and Certifications Upper and lower window UL listed and NEMA approved UL 98 UL listed under Section 508 UL listed File No. E6550 and E5239 V2-T-62 Volume 2 Commercial Distribution CA E February 203

12 Switching Devices. Product Selection DH36UCK 240 Vac Heavy-Duty Non-Metallic Fusible Maximum Horsepower Ratings System Ampere Rating Fuse Class Provision AC Standard Fuse Time Delay Single-Phase Three-Phase Single-Phase Three-Phase 240 Vac Heavy-Duty Non-Metallic Fusible Maximum Horsepower Ratings with Time Delay Fuses Ampere Fuse Class Single-Phase AC Three-Phase AC DC System Rating Provision 480V 600V 480V 600V 250V 600V 240 Vac Heavy-Duty Non-Metallic Non-Fusible 277/ V Maximum Horsepower Ratings with Time Delay Fuses Ampere Single-Phase AC Three-Phase AC DC System Rating 240V 480V 600V 240V 480V 600V 250V 600V Note 30A heavy-duty switches with Type J fuse provisions are available from the factory only. See table on Page V2-T-9 for catalog numbers. DC 250V NEMA 4X Enclosure Corrosion-Resistant, Non-Metallic Three-Pole, 240 Vac 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H -/2 3 7-/2 DH32FCK 60 H 3 7-/2 5 DH322FCK 00 H 7-/ DH323FCK 200 H DH324FCK Four-Wire (Three Blades, Three Fuses, S/N), 240 Vac 250 Vdc 30 H 3 7-/2 DH32NCK 60 H 7-/2 5 DH322NCK S/N 00 H DH323NCK 200 H DH324NCK Three-Pole, 480 Vac 600 Vac, 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H 7-/ DH36FCK 60 H DH362FCK 00 H DH363FCK 200 H DH364FCK Four-Wire (Three Blades, Three Fuses, S/N), 480 Vac 600 Vac, 250 Vdc 30 H 7-/ DH36NCK 60 H DH362NCK 00 H DH363NCK 200 H DH364NCK S/N Three-Pole, 480 Vac 600 Vac, 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) / DH36UCK DH362UCK DH363UCK DH364UCK NEMA 4X Enclosure Corrosion-Resistant, Non-Metallic NEMA 4X Enclosure Corrosion-Resistant, Non-Metallic Volume 2 Commercial Distribution CA E February V2-T-63

13 . Switching Devices DS36UX NEMA 7/9 Hazardous Location Disconnect Switch Product Description Features Eaton s Type DS switch is 30 00A used as the switching device. 600 Vac fusible and Ratings are 30 00A, 600 Vac, non-fusible fusible and non-fusible. Application Description The cast aluminum enclosure is ideally suited for harsh industrial applications including petrochemical facilities, mining operations, pharmaceutical plants and wastewater treatment facilities. See Page V2-T-64 for information For factory modifications, refer to Pages V2-T-7 through V2-T-20 Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches... V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch Product Selection V2-T-65 Dimensions V2-T-65 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Standards and Certifications Upper and lower window UL listed and NEMA approved UL 98 UL listed under Section 508 UL listed File No. E6550 and E5239 Compliances UL Classified Standard 886 File No. E84577 Class I, Division and 2, Groups B, C and D CSA Certified Standard C22.2 File No. LR Class I, Division and 2, Groups B, C and D Class II, Division and 2, Groups E, F and G Class II, Division and 2, Groups E, F and G Class III, Division and 2 Class III, Division and 2 NEMA 7/9 NEMA 7/9 Zone, IIB + H 2 Zone, IIB + H 2 V2-T-64 Volume 2 Commercial Distribution CA E February 203

14 Switching Devices. Product Selection DS36UX NEMA 7/9 Enclosure Sizes Fusible Maximum Horsepower Ratings Ampere Three-Phase AC DC Rating 480V 600V 250V NEMA 7/9 Enclosure Sizes Non-Fusible Maximum Horsepower Ratings Ampere Three-Phase AC DC Fuse Class Rating 480V 600V 250V Provision Dimensions Approximate Dimensions in Inches (mm) NEMA 7/9 Enclosure Sizes Standard Conduit Size DS36FX.50 (38.) DS362FX 2.00 (50.8) DS363FX 2.50 (63.5) DS36UX.50 (38.) DS362UX.50 (38.) DS363UX 2.00 (50.8) NEMA 7/9 Enclosure Number NEMA 7/ A 2 Notes Fuse Class Provision Number of Poles Accessories and modifications shown on Pages V2-T-7 through V2-T-20 are NOT applicable to NEMA 7/9 disconnect switches. 2 Dual three- and four-point mounting available as standard on enclosures and 2. Voltage Enclosure Number Catalog Number J Vac, 25/250 Vdc DS36FX J Vac, 25/250 Vdc 2 DS362FX J Vac, 25/250 Vdc 3 DS363FX Number of Poles Voltage Enclosure Number Catalog Number Vac, 25/250 Vdc DS36UX Vac, 25/250 Vdc DS362UX Vac, 25/250 Vdc 2 DS363UX Mounting Dimensions Inside Dimensions Outside Dimensions A B J C D F G H Number of Outlets Dimension K Approximate Weight Lbs (kg) 5.50 (39.7) 3.3 (333.5) 4.3 (358.9) 5.94 (50.9) 0.75 (273.) 0.63 (270.0) 5.25 (387.4) 8.84 (224.5) (50.8) 38 (7) (52.4) 8.00 (457.2) 9.00 (482.6) 6.50 (65.) 6.00 (406.4).00 (279.4) (520.7) 8.97 (227.8) (58.6) 57 (26) (260.4) (574.8).75 (298.4) (508.0) 6.38 (46.) 25.3 (638.3) 9.59 (243.6) (88.9) 04 (47) Volume 2 Commercial Distribution CA E February V2-T-65

15 . Switching Devices DH3665NURKLP and Quick Connect Double Throw Switches Quick Connect Switches Product Description 240V, 600 Vac Heavy-Duty, Single-Throw with Cam-Lok or Posi-Lok Receptacles, Fusible, Non-Fusible A NEMA or 3R enclosures Provision for 200% neutral Non-magnetic metal mounting plate Crouse-Hinds J Power Series E05, E06, E07 cam connectors Crouse-Hinds E200, E400 Posi-Lok panels Connector plugs are typically not provided, but may be special ordered Features Eaton s individual cable connector receptacle switches provide a convenient and safe way to quickly connect and disconnect portable equipment. The load side terminals are factory wired to individual receptacles located behind an interlocked door for added safety. The switch cannot be turned to the ON position without first closing the receptacle compartment door. A spring-loaded flap door in the receptacle compartment allows the cables to exit the compartment, but seals the compartment when the switch is not in use. For outdoor applications, this will reduce the possibility of insects building nests in the receptacle compartment. Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches Selection V2-T-67 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Available in double-throw and single-throw designs Single-throw receptacles can wire to line or load side Service entrance rated An additional flap door on the main compartment allows for quick connection in the event that the appropriate plugs are not readily available. Standards and Certifications UL listed File No. E5239 UL listed short-circuit rating of 0,000A rms symmetrical Product Selection For price and availability, contact the Switching Device Flex Center at V2-T-66 Volume 2 Commercial Distribution CA E February 203

16 Switching Devices. Selection Quick Connect Double-Throw Switch Type DT = Heavy-duty double-throw DH = Heavy-duty single-throw Poles 2 = Two-pole 3 = Three-pole 4 = Four-pole Maximum Voltage 2 = 240 Vac 6 = 600 Vac Switch Ampacity 3 = 00A 4 = 200A 5 = 400A 6 = 600A 7 = 800A DT N U R K Upper Switch U = Unfused F = Fusible N = Fusible with solid neutral SN = Fusible with switched neutral Series K= K Notes When upper and lower switches are the same, the switch configuration is consolidated in one letter (e.g., U not UU ). Also, a switch with a neutral will have either a solid neutral or a switched neutral, not both. Lastly, a switched neutral pole is never fused. 2 This field is only used when a switch is completely non-fused. LC Lower Switch 2 U = Unfused F = Fusible N = Fusible with solid neutral SN = Fusible with switched neutral Enclosure G = NEMA R= NEMA 3R Receptacle Type LC = Cam-Lok LCR = Cam-Lok reverse pin LP =Posi-Lok LPR = Posi-Lok reverse pin Neutral Blank = No neutral or incl. with switch designation N = Solid neutral SN = Switched neutral Volume 2 Commercial Distribution CA E February V2-T-67

17 . Switching Devices Solar Disconnect Switch Solar Disconnect Switch Product Description 600 Vdc Heavy-Duty Fusible and Non-Fusible A Single-pole switch capable of switching -600 Vdc circuit Features Clear line-shield covering all live parts For factory modifications, refer to Pages V2-T-7 through V2-T-20 Contents 600 Vdc Heavy-Duty Fusible and Non-Fusible Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches... V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch. V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch Standards and Certifications V2-T-69 Product Selection V2-T-69 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 NEC Required Labeling Factory Installed Isolated Ground and Equipment Ground Lug Factory-Installed Jumpers Standard K-Switch Mechanism Clear Deadfront Shield (covering all potentially live parts) Fused Center Pole (isolates fuse clips from potential back feed only one fuse required per switch) V2-T-68 Volume 2 Commercial Distribution CA E February 203

18 Switching Devices. Standards and Certifications UL 98 listed, File No. E5239 and marked suitable for NEC Article 690 applications to UL 74 Product Selection NEMA 3R Ampere Rating Fuse Class 30 DH6NRK R 30 DH6URKN R 60 DH62NRK R 60 DH62URKN R 00 DH63NRK R 00 DH63URKN R 200 DH64NRK R 200 DH64URKN R 400 DH65NRK R 400 DH65URKN R 600 DH66NRK R 600 DH66URKN R NEMA 2 Ampere Rating Fuse Class 30 DH6NDK R 30 DH6UDKN R 60 DH62NDK R 60 DH62UDKN R 00 DH63NDK R 00 DH63UDKN R 200 DH64NDK R 200 DH64UDKN R 400 DH65NDK R 400 DH65UDKN R 600 DH66NDK R 600 DH66UDKN R NEMA 4X Ampere Rating Fuse Class 30 DH6NWK R 30 DH6UWKN R 60 DH62NWK R 60 DH62UWKN R 00 DH63NWK R 00 DH63UWKN R 200 DH64NWK R 200 DH64UWKN R 400 DH65NWK R 400 DH65UWKN R 600 DH66NWK R 600 DH66UWKN R Volume 2 Commercial Distribution CA E February V2-T-69

19 Switching Devices. DH36FWK-GCL Contents Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw Product Description Standards and Certifications 240V, 600 Vac Heavy-Duty, Fusible, Non-Fusible, Single-Throw A Horsepower rated Suitable for service entrance use Factory-installed copper ground lug Copper terminal lugs Fuse pullers through 200A For factory modifications, refer to Pages V2-T-7 through V2-T-20 UL listed File No. E5239 Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw Product Selection V2-T-78 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Volume 2 Commercial Distribution CA E February V2-T-77

20 . Switching Devices Product Selection DH36FWK-GCL Fusible System Notes Ampere Rating Fuse Class Provision Maximum Horsepower Ratings with Time Delay Fuses AC Standard Fuse Time Delay DC Single- Phase Three- Phase Single- Phase Three- Phase 250V 600V NEMA 2 Enclosure Industrial, Dust-Tight Contact the Safety Switch Flex Center ( ) for copper neutrals. 2 NEMA 2 enclosures (30 600A) can be field modified to meet NEMA 3R rainproof requirements when a factory provided drain hole is opened. 3 Contact the Safety Switch Flex Center ( ) for availability of this product. 4 Use three-pole catalog numbers below for 600 Vac, 250 Vdc maximum applications. For 600 Vdc, see note 3. 5 DC rating for A switches is 250V. 6 For two-pole applications, use outside poles of three-pole switch. NEMA 4X Enclosure Corrosion-Resistant, Stainless Steel Three-Pole 240 Vac, 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H -/2 3 7-/2 DH32FDK-GCL 2 DH32FWK-GCL 60 H 3 7-/2 5 DH322FDK-GCL 2 DH322FWK-GCL 00 H 7-/ DH323FDK-GCL H DH324FDK-GCL 2 DH324FWK-GCL 400 H DH325FDK-GCL 2 DH325FWK-GCL 600 H DH326FDK-GCL 2 DH326FWK-GCL Two-Pole 480 Vac 600 Vac or DC 5 (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H 7-/2 0 5 DH26FDK-GCL 2 DH26FWK-GCL 60 H DH262FDK-GCL 2 3 or 4 00 H DH263FDK-GCL 2 3 or H DH264FDK-GCL 2 DH264FWK-GCL Three-Pole 480 Vac 600 Vac, 250 Vdc (Suitable for Service Entrance Use with a Neutral Kit Installed) 30 H 7-/ DH36FDK-GCL 2 DH36FWK-GCL 60 H DH362FDK-GCL 2 DH362FWK-GCL 00 H DH363FDK-GCL 2 DH363FWK-GCL 200 H DH364FDK-GCL 2 DH364FWK-GCL 400 H DH365FDK-GCL 2 DH365FWK-GCL 600 H DH366FDK-GCL 2 DH366FWK-GCL Non-Fusible 277/ V Maximum Horsepower Ratings AC Fuse Standard Fuse Time Delay Ampere Class Single- Three- Single- System Rating Provision Phase Phase Phase DC Three- Phase 250V 600V NEMA 2 Enclosure Industrial, Dust-Tight Three-Pole 480 Vac 600 Vac, 250 Vdc 6 (Suitable for Service Entrance use with a Neutral Kit Installed) NEMA 4X Enclosure Corrosion-Resistant, Stainless Steel 30 7-/ DH36UDK-GCL 2 DH36UWK-GCL DH362UDK-GCL 2 DH362UWK-GCL DH363UDK-GCL 2 DH363UWK-GCL DH364UDK-GCL 2 DH364UWK-GCL DH365UDK-GCL 2 DH365UWK-GCL DH366UDK-GCL 2 DH366UWK-GCL V2-T-78 Volume 2 Commercial Distribution CA E February 203

21 Switching Devices. Left-Handed Safety Switch Left-Handed Safety Switch Product Selection Ordering Information Step One: Left-handed safety switches are available from A for applications requiring an operating handle on the left side of the enclosure. Select the standard safety switch from the catalog and add Suffix LH to the catalog number. Step Two: Contact the Safety Switch Flex Center for complete pricing and delivery information. The Flex Center will provide a list price. An authorized negotiation (TSP) number will be provided to track your order. Safety Switch Flex Center Phone: Fax: Step Three: Enter the order on VISTALINE by description (with catalog number as applicable) and reference the authorized negotiation (TSP) number. Vista suffix will be ETS. Product code will be BE90. For order entry assistance, contact CSC at: Phone: ax: Note: Left-handed safety switches are supplied with a C36H handle. Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch 200% Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth V2-T-03 Volume 2 Commercial Distribution CA E February V2-T-87

22 . Switching Devices 200% Neutral Product Selection Ordering Information Step One: Safety switches with 200% neutrals are available from A. Select the standard safety switch from the catalog and add Suffix 200 to the catalog number. Step Two: Contact the Safety Switch Flex Center for complete pricing and delivery information. The Flex Center will provide a list price and specifications for the 200% neutral. An authorized negotiation (TSP) number will be provided to track your order. Safety Switch Flex Center Phone: Fax: Step Three: Enter the order on VISTALINE by description (with catalog number as applicable) and reference the authorized negotiation (TSP) number. Vista suffix will be ETS. Product code will be BE90. For order entry assistance, contact CSC at: Phone: Fax: Contents Description Product Overview General Duty Heavy-Duty Six-Pole Switches Double-Throw Switches EnviroLine Stainless Steel Switch EnviroLine Upper and Lower Window Switches. EnviroLine Receptacle Switches EnviroLine Non-Metallic Halyester Switch EnviroLine Non-Metallic KRYDON Switch NEMA 7/9 Hazardous Location Disconnect Switch Quick Connect Switches Solar Disconnect Switch Solar Combiner Box Source Combiner and Array Combiner Grade Stainless Steel Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw Heavy-Duty Fusible Accepting Cube Fuses Elevator Control Switch Auxiliary Power Heavy-Duty Safety Switch Left-Handed Safety Switch % Neutral Pringle Bolted Pressure Switch Type DS, Fusible and Non-Fusible Type Visi-Flex DE-ION Flange Mounted Variable Depth Flange Mounted Fixed Depth Page V2-T-2 V2-T-24 V2-T-29 V2-T-42 V2-T-44 V2-T-52 V2-T-55 V2-T-58 V2-T-60 V2-T-62 V2-T-64 V2-T-66 V2-T-68 V2-T-70 V2-T-73 V2-T-77 V2-T-79 V2-T-82 V2-T-84 V2-T-87 V2-T-89 V2-T-92 V2-T-95 V2-T-99 V2-T-03 V2-T-88 Volume 2 Commercial Distribution CA E February 203

23 Switching Devices. Fixed Depth Application Flange Mounted Fixed Depth Product Description Type C36 disconnect switches are suitable for installation in control enclosures having a righthand flange. Fusible disconnect switches will Product Selection Fixed Depth Application accept R fuses as standard. Field installable rejection kits are supplied as standard on 00 and 200A clips. For 30 and 60A rejection clips, see Page V2-T-00. The switch Contents Description Page Product Overview V2-T-2 General Duty V2-T-24 Heavy-Duty V2-T-29 Six-Pole Switches V2-T-42 Double-Throw Switches V2-T-44 EnviroLine Stainless Steel Switch V2-T-52 EnviroLine Upper and Lower Window Switches. V2-T-55 EnviroLine Receptacle Switches V2-T-58 EnviroLine Non-Metallic Halyester Switch V2-T-60 EnviroLine Non-Metallic KRYDON Switch V2-T-62 NEMA 7/9 Hazardous Location Disconnect Switch V2-T-64 Quick Connect Switches V2-T-66 Solar Disconnect Switch V2-T-68 Solar Combiner Box Source Combiner and Array Combiner V2-T Grade Stainless Steel V2-T-73 Mill-Duty Rated, Heavy-Duty, Fusible, Non-Fusible, Single-Throw V2-T-77 Heavy-Duty Fusible Accepting Cube Fuses V2-T-79 Elevator Control Switch V2-T-82 Auxiliary Power Heavy-Duty Safety Switch V2-T-84 Left-Handed Safety Switch V2-T % Neutral V2-T-88 Pringle Bolted Pressure Switch V2-T-89 Type DS, Fusible and Non-Fusible V2-T-92 Type Visi-Flex DE-ION V2-T-95 Flange Mounted Variable Depth V2-T-99 Flange Mounted Fixed Depth Accessories V2-T-04 Technical Data and Specifications V2-T-04 is UL component recognized for use on systems for use on systems with up to 200,000 rms symmetrical amperes available fault current when Class R clips are supplied. Operating Mechanism Fixed Depth with Disconnect Switch Right-Hand Mounting Maximum Horsepower Ratings Disconnect Switch Size (Amperes) Fuse Clip Rating (Amperes) Non-Interchangeable Type for Class H, J, K or R Type Fuses Only Minimum depth flange to panel 30 60A: 6.50 inches 00A: 7 inches Switch and Operating Mechanism with 4-Inch Handle For NEMA or 2 Enclosure DC Using AC System Volts (Motor Volts) Two Poles 208 (200) 240 (230) 480 (460) 600 (575) 250V Maximum 250V 600V 30 7-/2 7-/ Non-fusible C36FNC 30 C36FSC C36FSC Non-fusible C36FND C36FSD C36FSD Non-fusible C36FNE C36FSE263 Volume 2 Commercial Distribution CA E February V2-T-03

24 . Switching Devices Accessories Electrical Interlocks Circuit NO-NC 2NO-2NC Technical Data and Specifications Line Lug Data Disconnect Switch Size 30A 60A 00A 200A Dimensions Approximate Dimensions in Inches (mm) Frame Size Approximate Dimensions Notes DS200EK DS200EK2 Wire Size #2 4 Cu/Al #2 4 Cu/Al /0 4 Cu/Al 250 kcmil #6 Cu/Al Description A B C D E 30 60A disconnect switch 8.63 (29.2).38 (289.) 6.50 (65.).50 (38.) 9.50 (24.3) 50A circuit breaker 8.63 (29.2).38 (289.) 6.50 (65.).50 (38.) 9.50 (24.3) 00A disconnect switch 9.88 (25.0) 3.38 (339.9) 7.00 (77.8).25 (3.8).75 (298.5) 250A circuit breaker 9.88 (25.0) 3.38 (339.9) 7.00 (77.8).25 (3.8).75 (298.5) 400A circuit breaker 9.88 (25.0) 3.38 (339.9) 7.00 (77.8).25 (3.8).75 (298.5) 0.38 (9.7) 0.38 (9.7) Dia. Holes for Panel Support if Necessary 0.3 (7.9) Refers to rating of switch only. 2 For Rejection Clips, add Suffix Letter R to listed. Example: C36FSC2R. V2-T-04 Volume 2 Commercial Distribution CA E February 203